2 * Copyright (c) 1990 The Regents of the University of California.
3 * Copyright (c) 2008 The DragonFly Project.
6 * This code is derived from software contributed to Berkeley by
7 * William Jolitz and Don Ahn.
9 * Redistribution and use in source and binary forms, with or without
10 * modification, are permitted provided that the following conditions
12 * 1. Redistributions of source code must retain the above copyright
13 * notice, this list of conditions and the following disclaimer.
14 * 2. Redistributions in binary form must reproduce the above copyright
15 * notice, this list of conditions and the following disclaimer in the
16 * documentation and/or other materials provided with the distribution.
17 * 3. All advertising materials mentioning features or use of this software
18 * must display the following acknowledgement:
19 * This product includes software developed by the University of
20 * California, Berkeley and its contributors.
21 * 4. Neither the name of the University nor the names of its contributors
22 * may be used to endorse or promote products derived from this software
23 * without specific prior written permission.
25 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
26 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
27 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
28 * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
29 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
30 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
31 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
32 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
33 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
34 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
37 * from: @(#)clock.c 7.2 (Berkeley) 5/12/91
38 * $FreeBSD: src/sys/i386/isa/clock.c,v 1.149.2.6 2002/11/02 04:41:50 iwasaki Exp $
42 * Routines to handle clock hardware.
46 * inittodr, settodr and support routines written
47 * by Christoph Robitschko <chmr@edvz.tu-graz.ac.at>
49 * reintroduced and updated by Chris Stenton <chris@gnome.co.uk> 8/10/94
54 #include "opt_clock.h"
57 #include <sys/param.h>
58 #include <sys/systm.h>
59 #include <sys/eventhandler.h>
61 #include <sys/kernel.h>
66 #include <sys/sysctl.h>
68 #include <sys/systimer.h>
69 #include <sys/globaldata.h>
70 #include <sys/thread2.h>
71 #include <sys/systimer.h>
72 #include <sys/machintr.h>
73 #include <sys/interrupt.h>
75 #include <machine/clock.h>
76 #ifdef CLK_CALIBRATION_LOOP
78 #include <machine/cputypes.h>
79 #include <machine/frame.h>
80 #include <machine/ipl.h>
81 #include <machine/limits.h>
82 #include <machine/md_var.h>
83 #include <machine/psl.h>
84 #include <machine/segments.h>
85 #include <machine/smp.h>
86 #include <machine/specialreg.h>
87 #include <machine/intr_machdep.h>
90 #include <machine_base/apic/ioapic.h>
91 #include <machine_base/apic/ioapic_abi.h>
93 #include <machine_base/icu/icu.h>
94 #include <bus/isa/isa.h>
95 #include <bus/isa/rtc.h>
96 #include <machine_base/isa/timerreg.h>
98 static void i8254_restore(void);
99 static void resettodr_on_shutdown(void *arg __unused);
102 * 32-bit time_t's can't reach leap years before 1904 or after 2036, so we
103 * can use a simple formula for leap years.
105 #define LEAPYEAR(y) ((u_int)(y) % 4 == 0)
106 #define DAYSPERYEAR (31+28+31+30+31+30+31+31+30+31+30+31)
109 #define TIMER_FREQ 1193182
112 static uint8_t i8254_walltimer_sel;
113 static uint16_t i8254_walltimer_cntr;
115 int adjkerntz; /* local offset from GMT in seconds */
116 int disable_rtc_set; /* disable resettodr() if != 0 */
118 int64_t tsc_frequency;
120 int wall_cmos_clock; /* wall CMOS clock assumed if != 0 */
122 enum tstate { RELEASED, ACQUIRED };
123 enum tstate timer0_state;
124 enum tstate timer1_state;
125 enum tstate timer2_state;
127 static int beeping = 0;
128 static const u_char daysinmonth[] = {31,28,31,30,31,30,31,31,30,31,30,31};
129 static u_char rtc_statusa = RTCSA_DIVIDER | RTCSA_NOPROF;
130 static u_char rtc_statusb = RTCSB_24HR | RTCSB_PINTR;
131 static int rtc_loaded;
133 static int i8254_cputimer_div;
135 static int i8254_nointr;
136 static int i8254_intr_disable = 1;
137 TUNABLE_INT("hw.i8254.intr_disable", &i8254_intr_disable);
139 static struct callout sysbeepstop_ch;
141 static sysclock_t i8254_cputimer_count(void);
142 static void i8254_cputimer_construct(struct cputimer *cputimer, sysclock_t last);
143 static void i8254_cputimer_destruct(struct cputimer *cputimer);
145 static struct cputimer i8254_cputimer = {
146 SLIST_ENTRY_INITIALIZER,
150 i8254_cputimer_count,
151 cputimer_default_fromhz,
152 cputimer_default_fromus,
153 i8254_cputimer_construct,
154 i8254_cputimer_destruct,
159 static void i8254_intr_reload(struct cputimer_intr *, sysclock_t);
160 static void i8254_intr_config(struct cputimer_intr *, const struct cputimer *);
161 static void i8254_intr_initclock(struct cputimer_intr *, boolean_t);
163 static struct cputimer_intr i8254_cputimer_intr = {
165 .reload = i8254_intr_reload,
166 .enable = cputimer_intr_default_enable,
167 .config = i8254_intr_config,
168 .restart = cputimer_intr_default_restart,
169 .pmfixup = cputimer_intr_default_pmfixup,
170 .initclock = i8254_intr_initclock,
171 .next = SLIST_ENTRY_INITIALIZER,
173 .type = CPUTIMER_INTR_8254,
174 .prio = CPUTIMER_INTR_PRIO_8254,
175 .caps = CPUTIMER_INTR_CAP_PS
179 * timer0 clock interrupt. Timer0 is in one-shot mode and has stopped
180 * counting as of this interrupt. We use timer1 in free-running mode (not
181 * generating any interrupts) as our main counter. Each cpu has timeouts
184 * This code is INTR_MPSAFE and may be called without the BGL held.
187 clkintr(void *dummy, void *frame_arg)
189 static sysclock_t sysclock_count; /* NOTE! Must be static */
190 struct globaldata *gd = mycpu;
192 struct globaldata *gscan;
197 * SWSTROBE mode is a one-shot, the timer is no longer running
202 * XXX the dispatcher needs work. right now we call systimer_intr()
203 * directly or via IPI for any cpu with systimers queued, which is
204 * usually *ALL* of them. We need to use the LAPIC timer for this.
206 sysclock_count = sys_cputimer->count();
208 for (n = 0; n < ncpus; ++n) {
209 gscan = globaldata_find(n);
210 if (TAILQ_FIRST(&gscan->gd_systimerq) == NULL)
213 lwkt_send_ipiq3(gscan, (ipifunc3_t)systimer_intr,
216 systimer_intr(&sysclock_count, 0, frame_arg);
220 if (TAILQ_FIRST(&gd->gd_systimerq) != NULL)
221 systimer_intr(&sysclock_count, 0, frame_arg);
230 acquire_timer2(int mode)
232 if (timer2_state != RELEASED)
234 timer2_state = ACQUIRED;
237 * This access to the timer registers is as atomic as possible
238 * because it is a single instruction. We could do better if we
241 outb(TIMER_MODE, TIMER_SEL2 | (mode & 0x3f));
248 if (timer2_state != ACQUIRED)
250 outb(TIMER_MODE, TIMER_SEL2 | TIMER_SQWAVE | TIMER_16BIT);
251 timer2_state = RELEASED;
259 DB_SHOW_COMMAND(rtc, rtc)
261 kprintf("%02x/%02x/%02x %02x:%02x:%02x, A = %02x, B = %02x, C = %02x\n",
262 rtcin(RTC_YEAR), rtcin(RTC_MONTH), rtcin(RTC_DAY),
263 rtcin(RTC_HRS), rtcin(RTC_MIN), rtcin(RTC_SEC),
264 rtcin(RTC_STATUSA), rtcin(RTC_STATUSB), rtcin(RTC_INTR));
269 * Return the current cpu timer count as a 32 bit integer.
273 i8254_cputimer_count(void)
275 static __uint16_t cputimer_last;
280 outb(TIMER_MODE, i8254_walltimer_sel | TIMER_LATCH);
281 count = (__uint8_t)inb(i8254_walltimer_cntr); /* get countdown */
282 count |= ((__uint8_t)inb(i8254_walltimer_cntr) << 8);
283 count = -count; /* -> countup */
284 if (count < cputimer_last) /* rollover */
285 i8254_cputimer.base += 0x00010000;
286 ret = i8254_cputimer.base | count;
287 cputimer_last = count;
293 * This function is called whenever the system timebase changes, allowing
294 * us to calculate what is needed to convert a system timebase tick
295 * into an 8254 tick for the interrupt timer. If we can convert to a
296 * simple shift, multiplication, or division, we do so. Otherwise 64
297 * bit arithmatic is required every time the interrupt timer is reloaded.
300 i8254_intr_config(struct cputimer_intr *cti, const struct cputimer *timer)
306 * Will a simple divide do the trick?
308 div = (timer->freq + (cti->freq / 2)) / cti->freq;
309 freq = cti->freq * div;
311 if (freq >= timer->freq - 1 && freq <= timer->freq + 1)
312 i8254_cputimer_div = div;
314 i8254_cputimer_div = 0;
318 * Reload for the next timeout. It is possible for the reload value
319 * to be 0 or negative, indicating that an immediate timer interrupt
320 * is desired. For now make the minimum 2 ticks.
322 * We may have to convert from the system timebase to the 8254 timebase.
325 i8254_intr_reload(struct cputimer_intr *cti, sysclock_t reload)
329 if (i8254_cputimer_div)
330 reload /= i8254_cputimer_div;
332 reload = (int64_t)reload * cti->freq / sys_cputimer->freq;
338 if (timer0_running) {
339 outb(TIMER_MODE, TIMER_SEL0 | TIMER_LATCH); /* count-down timer */
340 count = (__uint8_t)inb(TIMER_CNTR0); /* lsb */
341 count |= ((__uint8_t)inb(TIMER_CNTR0) << 8); /* msb */
342 if (reload < count) {
343 outb(TIMER_MODE, TIMER_SEL0 | TIMER_SWSTROBE | TIMER_16BIT);
344 outb(TIMER_CNTR0, (__uint8_t)reload); /* lsb */
345 outb(TIMER_CNTR0, (__uint8_t)(reload >> 8)); /* msb */
350 reload = 0; /* full count */
351 outb(TIMER_MODE, TIMER_SEL0 | TIMER_SWSTROBE | TIMER_16BIT);
352 outb(TIMER_CNTR0, (__uint8_t)reload); /* lsb */
353 outb(TIMER_CNTR0, (__uint8_t)(reload >> 8)); /* msb */
359 * DELAY(usec) - Spin for the specified number of microseconds.
360 * DRIVERSLEEP(usec) - Spin for the specified number of microseconds,
361 * but do a thread switch in the loop
363 * Relies on timer 1 counting down from (cputimer_freq / hz)
364 * Note: timer had better have been programmed before this is first used!
367 DODELAY(int n, int doswitch)
369 int delta, prev_tick, tick, ticks_left;
374 static int state = 0;
378 for (n1 = 1; n1 <= 10000000; n1 *= 10)
383 kprintf("DELAY(%d)...", n);
386 * Guard against the timer being uninitialized if we are called
387 * early for console i/o.
389 if (timer0_state == RELEASED)
393 * Read the counter first, so that the rest of the setup overhead is
394 * counted. Then calculate the number of hardware timer ticks
395 * required, rounding up to be sure we delay at least the requested
396 * number of microseconds.
398 prev_tick = sys_cputimer->count();
399 ticks_left = ((u_int)n * (int64_t)sys_cputimer->freq + 999999) /
405 while (ticks_left > 0) {
406 tick = sys_cputimer->count();
410 delta = tick - prev_tick;
415 if (doswitch && ticks_left > 0)
421 kprintf(" %d calls to getit() at %d usec each\n",
422 getit_calls, (n + 5) / getit_calls);
427 * DELAY() never switches.
436 * Returns non-zero if the specified time period has elapsed. Call
437 * first with last_clock set to 0.
440 CHECKTIMEOUT(TOTALDELAY *tdd)
445 if (tdd->started == 0) {
446 if (timer0_state == RELEASED)
448 tdd->last_clock = sys_cputimer->count();
452 delta = sys_cputimer->count() - tdd->last_clock;
453 us = (u_int64_t)delta * (u_int64_t)1000000 /
454 (u_int64_t)sys_cputimer->freq;
455 tdd->last_clock += (u_int64_t)us * (u_int64_t)sys_cputimer->freq /
458 return (tdd->us < 0);
463 * DRIVERSLEEP() does not switch if called with a spinlock held or
464 * from a hard interrupt.
467 DRIVERSLEEP(int usec)
469 globaldata_t gd = mycpu;
471 if (gd->gd_intr_nesting_level || gd->gd_spinlocks_wr) {
479 sysbeepstop(void *chan)
481 outb(IO_PPI, inb(IO_PPI)&0xFC); /* disable counter2 output to speaker */
487 sysbeep(int pitch, int period)
489 if (acquire_timer2(TIMER_SQWAVE|TIMER_16BIT))
491 if (sysbeep_enable == 0)
494 * Nobody else is using timer2, we do not need the clock lock
496 outb(TIMER_CNTR2, pitch);
497 outb(TIMER_CNTR2, (pitch>>8));
499 /* enable counter2 output to speaker */
500 outb(IO_PPI, inb(IO_PPI) | 3);
502 callout_reset(&sysbeepstop_ch, period, sysbeepstop, NULL);
508 * RTC support routines
519 val = inb(IO_RTC + 1);
526 writertc(u_char reg, u_char val)
532 outb(IO_RTC + 1, val);
533 inb(0x84); /* XXX work around wrong order in rtcin() */
540 return(bcd2bin(rtcin(port)));
544 calibrate_clocks(void)
547 u_int count, prev_count, tot_count;
548 int sec, start_sec, timeout;
551 kprintf("Calibrating clock(s) ... ");
552 if (!(rtcin(RTC_STATUSD) & RTCSD_PWR))
556 /* Read the mc146818A seconds counter. */
558 if (!(rtcin(RTC_STATUSA) & RTCSA_TUP)) {
559 sec = rtcin(RTC_SEC);
566 /* Wait for the mC146818A seconds counter to change. */
569 if (!(rtcin(RTC_STATUSA) & RTCSA_TUP)) {
570 sec = rtcin(RTC_SEC);
571 if (sec != start_sec)
578 /* Start keeping track of the i8254 counter. */
579 prev_count = sys_cputimer->count();
585 old_tsc = 0; /* shut up gcc */
588 * Wait for the mc146818A seconds counter to change. Read the i8254
589 * counter for each iteration since this is convenient and only
590 * costs a few usec of inaccuracy. The timing of the final reads
591 * of the counters almost matches the timing of the initial reads,
592 * so the main cause of inaccuracy is the varying latency from
593 * inside getit() or rtcin(RTC_STATUSA) to the beginning of the
594 * rtcin(RTC_SEC) that returns a changed seconds count. The
595 * maximum inaccuracy from this cause is < 10 usec on 486's.
599 if (!(rtcin(RTC_STATUSA) & RTCSA_TUP))
600 sec = rtcin(RTC_SEC);
601 count = sys_cputimer->count();
602 tot_count += (int)(count - prev_count);
604 if (sec != start_sec)
611 * Read the cpu cycle counter. The timing considerations are
612 * similar to those for the i8254 clock.
615 tsc_frequency = rdtsc() - old_tsc;
619 kprintf("TSC clock: %llu Hz, ", (long long)tsc_frequency);
620 kprintf("i8254 clock: %u Hz\n", tot_count);
624 kprintf("failed, using default i8254 clock of %u Hz\n",
625 i8254_cputimer.freq);
626 return (i8254_cputimer.freq);
632 timer0_state = ACQUIRED;
637 * Timer0 is our fine-grained variable clock interrupt
639 outb(TIMER_MODE, TIMER_SEL0 | TIMER_SWSTROBE | TIMER_16BIT);
640 outb(TIMER_CNTR0, 2); /* lsb */
641 outb(TIMER_CNTR0, 0); /* msb */
645 cputimer_intr_register(&i8254_cputimer_intr);
646 cputimer_intr_select(&i8254_cputimer_intr, 0);
650 * Timer1 or timer2 is our free-running clock, but only if another
651 * has not been selected.
653 cputimer_register(&i8254_cputimer);
654 cputimer_select(&i8254_cputimer, 0);
658 i8254_cputimer_construct(struct cputimer *timer, sysclock_t oldclock)
663 * Should we use timer 1 or timer 2 ?
666 TUNABLE_INT_FETCH("hw.i8254.walltimer", &which);
667 if (which != 1 && which != 2)
672 timer->name = "i8254_timer1";
673 timer->type = CPUTIMER_8254_SEL1;
674 i8254_walltimer_sel = TIMER_SEL1;
675 i8254_walltimer_cntr = TIMER_CNTR1;
676 timer1_state = ACQUIRED;
679 timer->name = "i8254_timer2";
680 timer->type = CPUTIMER_8254_SEL2;
681 i8254_walltimer_sel = TIMER_SEL2;
682 i8254_walltimer_cntr = TIMER_CNTR2;
683 timer2_state = ACQUIRED;
687 timer->base = (oldclock + 0xFFFF) & ~0xFFFF;
690 outb(TIMER_MODE, i8254_walltimer_sel | TIMER_RATEGEN | TIMER_16BIT);
691 outb(i8254_walltimer_cntr, 0); /* lsb */
692 outb(i8254_walltimer_cntr, 0); /* msb */
693 outb(IO_PPI, inb(IO_PPI) | 1); /* bit 0: enable gate, bit 1: spkr */
698 i8254_cputimer_destruct(struct cputimer *timer)
700 switch(timer->type) {
701 case CPUTIMER_8254_SEL1:
702 timer1_state = RELEASED;
704 case CPUTIMER_8254_SEL2:
705 timer2_state = RELEASED;
716 /* Restore all of the RTC's "status" (actually, control) registers. */
717 writertc(RTC_STATUSB, RTCSB_24HR);
718 writertc(RTC_STATUSA, rtc_statusa);
719 writertc(RTC_STATUSB, rtc_statusb);
723 * Restore all the timers.
725 * This function is called to resynchronize our core timekeeping after a
726 * long halt, e.g. from apm_default_resume() and friends. It is also
727 * called if after a BIOS call we have detected munging of the 8254.
728 * It is necessary because cputimer_count() counter's delta may have grown
729 * too large for nanouptime() and friends to handle, or (in the case of 8254
730 * munging) might cause the SYSTIMER code to prematurely trigger.
736 i8254_restore(); /* restore timer_freq and hz */
737 rtc_restore(); /* reenable RTC interrupts */
742 * Initialize 8254 timer 0 early so that it can be used in DELAY().
750 * Can we use the TSC?
752 if (cpu_feature & CPUID_TSC)
758 * Initial RTC state, don't do anything unexpected
760 writertc(RTC_STATUSA, rtc_statusa);
761 writertc(RTC_STATUSB, RTCSB_24HR);
764 * Set the 8254 timer0 in TIMER_SWSTROBE mode and cause it to
765 * generate an interrupt, which we will ignore for now.
767 * Set the 8254 timer1 in TIMER_RATEGEN mode and load 0x0000
768 * (so it counts a full 2^16 and repeats). We will use this timer
772 freq = calibrate_clocks();
773 #ifdef CLK_CALIBRATION_LOOP
776 "Press a key on the console to abort clock calibration\n");
777 while (cncheckc() == -1)
783 * Use the calibrated i8254 frequency if it seems reasonable.
784 * Otherwise use the default, and don't use the calibrated i586
787 delta = freq > i8254_cputimer.freq ?
788 freq - i8254_cputimer.freq : i8254_cputimer.freq - freq;
789 if (delta < i8254_cputimer.freq / 100) {
790 #ifndef CLK_USE_I8254_CALIBRATION
793 "CLK_USE_I8254_CALIBRATION not specified - using default frequency\n");
794 freq = i8254_cputimer.freq;
798 * Interrupt timer's freq must be adjusted
799 * before we change the cuptimer's frequency.
801 i8254_cputimer_intr.freq = freq;
802 cputimer_set_frequency(&i8254_cputimer, freq);
806 "%d Hz differs from default of %d Hz by more than 1%%\n",
807 freq, i8254_cputimer.freq);
811 #ifndef CLK_USE_TSC_CALIBRATION
812 if (tsc_frequency != 0) {
815 "CLK_USE_TSC_CALIBRATION not specified - using old calibration method\n");
819 if (tsc_present && tsc_frequency == 0) {
821 * Calibration of the i586 clock relative to the mc146818A
822 * clock failed. Do a less accurate calibration relative
823 * to the i8254 clock.
825 u_int64_t old_tsc = rdtsc();
828 tsc_frequency = rdtsc() - old_tsc;
829 #ifdef CLK_USE_TSC_CALIBRATION
831 kprintf("TSC clock: %llu Hz (Method B)\n",
837 EVENTHANDLER_REGISTER(shutdown_post_sync, resettodr_on_shutdown, NULL, SHUTDOWN_PRI_LAST);
841 * We can not use the TSC in SMP mode, until we figure out a
842 * cheap (impossible), reliable and precise (yeah right!) way
843 * to synchronize the TSCs of all the CPUs.
844 * Curse Intel for leaving the counter out of the I/O APIC.
849 * We can not use the TSC if we support APM. Precise timekeeping
850 * on an APM'ed machine is at best a fools pursuit, since
851 * any and all of the time spent in various SMM code can't
852 * be reliably accounted for. Reading the RTC is your only
853 * source of reliable time info. The i8254 looses too of course
854 * but we need to have some kind of time...
855 * We don't know at this point whether APM is going to be used
856 * or not, nor when it might be activated. Play it safe.
859 #endif /* NAPM > 0 */
861 #endif /* !defined(SMP) */
865 * Sync the time of day back to the RTC on shutdown, but only if
866 * we have already loaded it and have not crashed.
869 resettodr_on_shutdown(void *arg __unused)
871 if (rtc_loaded && panicstr == NULL) {
877 * Initialize the time of day register, based on the time base which is, e.g.
881 inittodr(time_t base)
883 unsigned long sec, days;
894 /* Look if we have a RTC present and the time is valid */
895 if (!(rtcin(RTC_STATUSD) & RTCSD_PWR))
898 /* wait for time update to complete */
899 /* If RTCSA_TUP is zero, we have at least 244us before next update */
901 while (rtcin(RTC_STATUSA) & RTCSA_TUP) {
907 #ifdef USE_RTC_CENTURY
908 year = readrtc(RTC_YEAR) + readrtc(RTC_CENTURY) * 100;
910 year = readrtc(RTC_YEAR) + 1900;
918 month = readrtc(RTC_MONTH);
919 for (m = 1; m < month; m++)
920 days += daysinmonth[m-1];
921 if ((month > 2) && LEAPYEAR(year))
923 days += readrtc(RTC_DAY) - 1;
924 for (y = 1970; y < year; y++)
925 days += DAYSPERYEAR + LEAPYEAR(y);
926 sec = ((( days * 24 +
927 readrtc(RTC_HRS)) * 60 +
928 readrtc(RTC_MIN)) * 60 +
930 /* sec now contains the number of seconds, since Jan 1 1970,
931 in the local time zone */
933 sec += tz.tz_minuteswest * 60 + (wall_cmos_clock ? adjkerntz : 0);
935 y = time_second - sec;
936 if (y <= -2 || y >= 2) {
937 /* badly off, adjust it */
947 kprintf("Invalid time in real time clock.\n");
948 kprintf("Check and reset the date immediately!\n");
952 * Write system time back to RTC
969 /* Disable RTC updates and interrupts. */
970 writertc(RTC_STATUSB, RTCSB_HALT | RTCSB_24HR);
972 /* Calculate local time to put in RTC */
974 tm -= tz.tz_minuteswest * 60 + (wall_cmos_clock ? adjkerntz : 0);
976 writertc(RTC_SEC, bin2bcd(tm%60)); tm /= 60; /* Write back Seconds */
977 writertc(RTC_MIN, bin2bcd(tm%60)); tm /= 60; /* Write back Minutes */
978 writertc(RTC_HRS, bin2bcd(tm%24)); tm /= 24; /* Write back Hours */
980 /* We have now the days since 01-01-1970 in tm */
981 writertc(RTC_WDAY, (tm+4)%7); /* Write back Weekday */
982 for (y = 1970, m = DAYSPERYEAR + LEAPYEAR(y);
984 y++, m = DAYSPERYEAR + LEAPYEAR(y))
987 /* Now we have the years in y and the day-of-the-year in tm */
988 writertc(RTC_YEAR, bin2bcd(y%100)); /* Write back Year */
989 #ifdef USE_RTC_CENTURY
990 writertc(RTC_CENTURY, bin2bcd(y/100)); /* ... and Century */
996 if (m == 1 && LEAPYEAR(y))
1003 writertc(RTC_MONTH, bin2bcd(m + 1)); /* Write back Month */
1004 writertc(RTC_DAY, bin2bcd(tm + 1)); /* Write back Month Day */
1006 /* Reenable RTC updates and interrupts. */
1007 writertc(RTC_STATUSB, rtc_statusb);
1014 i8254_ioapic_trial(int irq, struct cputimer_intr *cti)
1020 * Following code assumes the 8254 is the cpu timer,
1021 * so make sure it is.
1023 KKASSERT(sys_cputimer == &i8254_cputimer);
1024 KKASSERT(cti == &i8254_cputimer_intr);
1026 lastcnt = get_interrupt_counter(irq);
1029 * Force an 8254 Timer0 interrupt and wait 1/100s for
1030 * it to happen, then see if we got it.
1032 kprintf("IOAPIC: testing 8254 interrupt delivery\n");
1034 i8254_intr_reload(cti, 2);
1035 base = sys_cputimer->count();
1036 while (sys_cputimer->count() - base < sys_cputimer->freq / 100)
1039 if (get_interrupt_counter(irq) - lastcnt == 0)
1047 * Start both clocks running. DragonFly note: the stat clock is no longer
1048 * used. Instead, 8254 based systimers are used for all major clock
1052 i8254_intr_initclock(struct cputimer_intr *cti, boolean_t selected)
1054 #ifdef SMP /* APIC-IO */
1055 void *clkdesc = NULL;
1056 int irq = 0, mixed_mode = 0, error;
1059 callout_init(&sysbeepstop_ch);
1061 if (!selected && i8254_intr_disable)
1065 * The stat interrupt mask is different without the
1066 * statistics clock. Also, don't set the interrupt
1067 * flag which would normally cause the RTC to generate
1070 rtc_statusb = RTCSB_24HR;
1072 /* Finish initializing 8254 timer 0. */
1074 if (ioapic_enable) {
1075 irq = ioapic_abi_find_irq(0, INTR_TRIGGER_EDGE,
1076 INTR_POLARITY_HIGH);
1079 error = ioapic_abi_extint_irqmap(0);
1081 irq = ioapic_abi_find_irq(0, INTR_TRIGGER_EDGE,
1082 INTR_POLARITY_HIGH);
1089 kprintf("IOAPIC: setup mixed mode for "
1090 "irq 0 failed: %d\n", error);
1093 panic("IOAPIC: setup mixed mode for "
1094 "irq 0 failed: %d\n", error);
1099 clkdesc = register_int(irq, clkintr, NULL, "clk",
1101 INTR_EXCL | INTR_CLOCK |
1102 INTR_NOPOLL | INTR_MPSAFE |
1104 machintr_intren(irq);
1107 register_int(0, clkintr, NULL, "clk", NULL,
1108 INTR_EXCL | INTR_CLOCK |
1109 INTR_NOPOLL | INTR_MPSAFE |
1112 #ifdef SMP /* APIC-IO */
1116 /* Initialize RTC. */
1117 writertc(RTC_STATUSA, rtc_statusa);
1118 writertc(RTC_STATUSB, RTCSB_24HR);
1121 if (ioapic_enable) {
1122 error = i8254_ioapic_trial(irq, cti);
1126 kprintf("IOAPIC: mixed mode for irq %d "
1127 "trial failed: %d\n",
1131 panic("IOAPIC: mixed mode for irq %d "
1132 "trial failed: %d\n", irq, error);
1135 kprintf("IOAPIC: warning 8254 is not connected "
1136 "to the correct pin, try mixed mode\n");
1137 machintr_intrdis(irq);
1138 unregister_int(clkdesc);
1139 goto mixed_mode_setup;
1147 i8254_nointr = 1; /* don't try to register again */
1148 cputimer_intr_deregister(cti);
1152 setstatclockrate(int newhz)
1154 if (newhz == RTC_PROFRATE)
1155 rtc_statusa = RTCSA_DIVIDER | RTCSA_PROF;
1157 rtc_statusa = RTCSA_DIVIDER | RTCSA_NOPROF;
1158 writertc(RTC_STATUSA, rtc_statusa);
1163 tsc_get_timecount(struct timecounter *tc)
1169 #ifdef KERN_TIMESTAMP
1170 #define KERN_TIMESTAMP_SIZE 16384
1171 static u_long tsc[KERN_TIMESTAMP_SIZE] ;
1172 SYSCTL_OPAQUE(_debug, OID_AUTO, timestamp, CTLFLAG_RD, tsc,
1173 sizeof(tsc), "LU", "Kernel timestamps");
1179 tsc[i] = (u_int32_t)rdtsc();
1182 if (i >= KERN_TIMESTAMP_SIZE)
1184 tsc[i] = 0; /* mark last entry */
1186 #endif /* KERN_TIMESTAMP */
1193 hw_i8254_timestamp(SYSCTL_HANDLER_ARGS)
1200 if (sys_cputimer == &i8254_cputimer)
1201 count = sys_cputimer->count();
1209 ksnprintf(buf, sizeof(buf), "%08x %016llx", count, (long long)tscval);
1210 return(SYSCTL_OUT(req, buf, strlen(buf) + 1));
1213 SYSCTL_NODE(_hw, OID_AUTO, i8254, CTLFLAG_RW, 0, "I8254");
1214 SYSCTL_UINT(_hw_i8254, OID_AUTO, freq, CTLFLAG_RD, &i8254_cputimer.freq, 0,
1216 SYSCTL_PROC(_hw_i8254, OID_AUTO, timestamp, CTLTYPE_STRING|CTLFLAG_RD,
1217 0, 0, hw_i8254_timestamp, "A", "");
1219 SYSCTL_INT(_hw, OID_AUTO, tsc_present, CTLFLAG_RD,
1220 &tsc_present, 0, "TSC Available");
1221 SYSCTL_QUAD(_hw, OID_AUTO, tsc_frequency, CTLFLAG_RD,
1222 &tsc_frequency, 0, "TSC Frequency");