Merge from vendor branch SENDMAIL:
[dragonfly.git] / sys / conf / options
1 # $FreeBSD: src/sys/conf/options,v 1.191.2.53 2003/06/04 17:56:58 sam Exp $
2 # $DragonFly: src/sys/conf/options,v 1.73 2007/11/01 22:05:23 dillon Exp $
3 #
4 #        On the handling of kernel options
5 #
6 # All kernel options should be listed in LINT, with suitable
7 # descriptions.  Negative options (options that make some code not
8 # compile) should be commented out; LINT should compile as much code
9 # as possible.  Try to structure option-using code so that a single
10 # option only switch code on, or only switch code off, to make it
11 # possible to have a full compile-test.  If necessary, you can include
12 # "opt_lint.h" and check for COMPILING_LINT to get maximum code
13 # coverage.
14 #
15 # All new options shall also be listed in either "conf/options" or
16 # "<platform>/conf/options.<platform>".  Options that affect a single
17 # source-file <xxx>.[c|s] should be directed into "opt_<xxx>.h", while
18 # options that affect multiple files should either go in
19 # "opt_global.h" if this is a kernel-wide option (used just about
20 # everywhere), or in "opt_<option-name-in-lower-case>.h" if it affect
21 # only some files.  Note that the effect of listing only an option
22 # without a header-file-name in conf/options (and cousins) is that the
23 # last convention is followed.
24 #
25 # This handling scheme is not yet fully implemented.
26 #
27 #
28 # Format of this file:
29 # Option name   filename
30 #
31 # If filename is missing, the default is
32 # opt_<name-of-option-in-lower-case>.h
33
34 # Adaptec Array Controller driver options
35 AAC_DEBUG               opt_aac.h       # Debugging levels:
36                                         # 0 - quiet, only emit warnings
37                                         # 1 - noisy, emit major function
38                                         #     points and things done
39                                         # 2 - extremely noisy, emit trace
40                                         #     items in loops, etc.
41
42 # Adaptec aic7xxx SCSI controller options
43 AHC_ALLOW_MEMIO         opt_aic7xxx.h   # Allow PCI devices to use memory
44                                         # mapped I/O
45
46 AHC_TMODE_ENABLE        opt_aic7xxx.h   # Bitmap of units to enable
47                                         # targetmode operations.
48
49 AHC_DUMP_EEPROM         opt_aic7xxx.h   # Dump the contents of our
50                                         # configuration prom.
51
52 AHC_DEBUG               opt_aic7xxx.h   # Compile in Aic7xxx Debugging code.
53
54 AHC_DEBUG_OPTS          opt_aic7xxx.h   # Aic7xxx driver debugging options.
55                                         # See sys/dev/aic7xxx/aic7xxx.h
56
57 AHC_REG_PRETTY_PRINT    opt_aic7xxx.h   # Print register bitfields in debug
58                                         # output.  Adds ~15k to driver.
59
60 # Adaptec aic79xx SCSI controller options
61 AHD_DEBUG               opt_aic79xx.h   # Compile in Aic79xx Debugging code.
62
63 AHD_DEBUG_OPTS          opt_aic79xx.h   # Aic79xx driver debugging options.
64                                         # See sys/dev/aic7xxx/aic79xx.h
65
66 AHD_TMODE_ENABLE        opt_aic79xx.h   # Bitmap of units to enable
67                                         # targetmode operations.
68
69 AHD_REG_PRETTY_PRINT    opt_aic79xx.h   # Print register bitfields in debug
70                                         # output.  Adds ~15k to driver.
71
72 ADW_ALLOW_MEMIO         opt_adw.h       # Allow PCI devices to use memory
73                                         # mapped I/O
74 TWA_DEBUG               opt_twa.h
75 TWA_FLASH_FIRMWARE      opt_twa.h
76
77 #options for ACPI support
78 ACPI_DEBUG              opt_acpi.h
79 ACPI_NO_SEMAPHORES      opt_acpi.h
80 ACPI_QUIRK_VMWARE       opt_acpi.h
81
82 # Miscellaneous options.
83 COMPAT_DF12     opt_compatdf12.h
84 COMPAT_43       opt_compat.h
85 COMPAT_SUNOS    opt_compat.h
86 COMPILING_LINT  opt_lint.h
87 CY_PCI_FASTINTR
88 DDB
89 DDB_TRACE
90 DDB_UNATTENDED  opt_ddb.h
91 GDB_REMOTE_CHAT opt_ddb.h
92 HW_WDOG
93 KTRACE
94 LIBICONV
95 MD_NSECT        opt_md.h
96 MD_ROOT         opt_md.h
97 MD_ROOT_SIZE    opt_md.h
98 NSWAPDEV        opt_swap.h
99 NSWBUF_MIN      opt_swap.h
100 PPS_SYNC        opt_ntp.h
101 QUOTA
102 SUIDDIR         opt_suiddir.h
103 SYSVMSG         opt_sysvipc.h
104 SYSVSEM         opt_sysvipc.h
105 SYSVSHM         opt_sysvipc.h
106 SHMALL          opt_sysvipc.h
107 SHMMAX          opt_sysvipc.h
108 SHMMAXPGS       opt_sysvipc.h
109 SHMMIN          opt_sysvipc.h
110 SHMMNI          opt_sysvipc.h
111 SHMSEG          opt_sysvipc.h
112 SEMMAP          opt_sysvipc.h
113 SEMMNI          opt_sysvipc.h
114 SEMMNS          opt_sysvipc.h
115 SEMMNU          opt_sysvipc.h
116 SEMMSL          opt_sysvipc.h
117 SEMOPM          opt_sysvipc.h
118 SEMUME          opt_sysvipc.h
119 MSGMNB          opt_sysvipc.h
120 MSGMNI          opt_sysvipc.h
121 MSGSEG          opt_sysvipc.h
122 MSGSSZ          opt_sysvipc.h
123 MSGTQL          opt_sysvipc.h
124 UCONSOLE
125 ICMP_BANDLIM
126 VFS_AIO
127 DIRECTIO        opt_directio.h
128
129 # POSIX kernel options
130 P1003_1B                        opt_posix.h
131 _KPOSIX_PRIORITY_SCHEDULING     opt_posix.h
132 _KPOSIX_VERSION                 opt_posix.h
133
134 # Do we want the config file compiled into the kernel?
135 INCLUDE_CONFIG_FILE     opt_config.h
136
137 # Options for static file systems.  These should only be used at config
138 # time, since the corresponding lkms cannot work if there are any static
139 # dependencies.  Unusability is enforced by hiding the defines for the
140 # options in a never-included header.
141 EXT2FS          opt_dontuse.h
142 FDESC           opt_dontuse.h
143 MFS             opt_dontuse.h
144 MSDOSFS         opt_dontuse.h
145 NULLFS          opt_dontuse.h
146 PORTAL          opt_dontuse.h
147 PROCFS          opt_dontuse.h
148 UDF             opt_dontuse.h
149 NTFS            opt_dontuse.h
150
151 # These static filesystems has one slightly bogus static dependency in
152 # sys/platform/.../i386/autoconf.c.  If any of these filesystems are
153 # statically compiled into the kernel, code for mounting them as root
154 # filesystems will be enabled - but look below.  Boot-code is purposely
155 # unavailable for the LKM-based versions.
156 CD9660
157 FFS
158 NFS
159 NWFS
160 USERFS
161 HAMMER
162
163 # If you are following the conditions in the copyright,
164 # you can enable soft-updates which will speed up a lot of thigs
165 # and make the system safer from crashes at the same time.
166 # otherwise a STUB module will be compiled in.
167 SOFTUPDATES     opt_ffs.h
168
169 # Enable fast hash lookups for large directories on UFS-based filesystems.
170 UFS_DIRHASH     opt_ufs.h
171
172 # The above static dependencies are planned removed, with a
173 # <filesystem>_ROOT option to control if it usable as root.  This list
174 # allows these options to be present in config files already (though
175 # they won't make any difference yet).
176 FFS_ROOT        opt_ffs.h
177 NFS_ROOT        opt_nfsroot.h
178
179 # The union static file system has bogus static dependencies, so it isn't
180 # hidden yet.
181 UNION
182
183 # Options used only in subr_param.c.
184 HZ              opt_param.h
185 MAXFILES        opt_param.h
186 NBUF            opt_param.h
187 NMBCLUSTERS     opt_param.h
188 NMBUFS          opt_param.h
189 NSFBUFS         opt_param.h
190 VM_BCACHE_SIZE_MAX      opt_param.h
191 VM_SWZONE_SIZE_MAX      opt_param.h
192 MAXUSERS
193 DFLDSIZ         opt_param.h
194 MAXDSIZ         opt_param.h
195 MAXSSIZ         opt_param.h
196
197 # Generic SCSI options.
198 CAM_MAX_HIGHPOWER       opt_cam.h
199 CAMDEBUG                opt_cam.h
200 CAM_DEBUG_DELAY         opt_cam.h
201 CAM_DEBUG_BUS           opt_cam.h
202 CAM_DEBUG_TARGET        opt_cam.h
203 CAM_DEBUG_LUN           opt_cam.h
204 CAM_DEBUG_FLAGS         opt_cam.h
205 SCSI_DELAY              opt_scsi.h
206 SCSI_NO_SENSE_STRINGS   opt_scsi.h
207 SCSI_NO_OP_STRINGS      opt_scsi.h
208
209 # Options used only in cam/scsi/scsi_cd.c
210 CHANGER_MIN_BUSY_SECONDS        opt_cd.h
211 CHANGER_MAX_BUSY_SECONDS        opt_cd.h
212
213 # Options used only in cam/scsi/scsi_sa.c.
214 SA_IO_TIMEOUT           opt_sa.h
215 SA_SPACE_TIMEOUT        opt_sa.h
216 SA_REWIND_TIMEOUT       opt_sa.h
217 SA_ERASE_TIMEOUT        opt_sa.h
218 SA_1FM_AT_EOD           opt_sa.h
219
220 # Options used only in cam/scsi/scsi_pt.c
221 SCSI_PT_DEFAULT_TIMEOUT opt_pt.h
222
223 # Options used only in cam/scsi/scsi_ses.c
224 SES_ENABLE_PASSTHROUGH  opt_ses.h
225
226 # Options used in dev/sym/ (Symbios SCSI driver).
227 SYM_SETUP_LP_PROBE_MAP  opt_sym.h       #-Low Priority Probe Map (bits)
228                                         # Allows the ncr to take precedence
229                                         # 1 (1<<0) -> 810a, 860
230                                         # 2 (1<<1) -> 825a, 875, 885, 895
231                                         # 4 (1<<2) -> 895a, 896, 1510d 
232 SYM_SETUP_SCSI_DIFF     opt_sym.h       #-HVD support for 825a, 875, 885
233                                         # disabled:0 (default), enabled:1
234 SYM_SETUP_PCI_PARITY    opt_sym.h       #-PCI parity checking
235                                         # disabled:0, enabled:1 (default)
236 SYM_SETUP_MAX_LUN       opt_sym.h       #-Number of LUNs supported
237                                         # default:8, range:[1..64]
238
239 # Options used only in pci/ncr.c
240 SCSI_NCR_DEBUG          opt_ncr.h
241 SCSI_NCR_MAX_SYNC       opt_ncr.h
242 SCSI_NCR_MAX_WIDE       opt_ncr.h
243 SCSI_NCR_MYADDR         opt_ncr.h
244
245 # Options used only in pci/isp_pci.c
246 ISP_TARGET_MODE         opt_isp.h
247
248 # Options used in the 'ata' ATA/ATAPI driver
249 ATA_STATIC_ID           opt_ata.h
250
251 # Net stuff.
252 # altq stuff
253 ALTQ                    opt_global.h
254 ALTQ_CBQ                opt_altq.h
255 ALTQ_RED                opt_altq.h
256 ALTQ_RIO                opt_altq.h
257 ALTQ_HFSC               opt_altq.h
258 ALTQ_PRIQ               opt_altq.h
259 ALTQ_NOPCC              opt_altq.h
260 ALTQ_DEBUG              opt_altq.h
261
262 ACCEPT_FILTER_DATA
263 ACCEPT_FILTER_HTTP
264 BOOTP                   opt_bootp.h
265 BOOTP_COMPAT            opt_bootp.h
266 BOOTP_NFSROOT           opt_bootp.h
267 BOOTP_NFSV3             opt_bootp.h
268 BOOTP_WIRED_TO          opt_bootp.h
269 CARP                    opt_carp.h
270 ETHER_II                opt_ef.h
271 ETHER_8023              opt_ef.h
272 ETHER_8022              opt_ef.h
273 ETHER_SNAP              opt_ef.h
274 MROUTING                opt_mrouting.h
275 PIM                     opt_mrouting.h
276 INET                    opt_inet.h
277 INET6                   opt_inet6.h
278 IPSEC                   opt_ipsec.h
279 IPSEC_ESP               opt_ipsec.h
280 IPSEC_DEBUG             opt_ipsec.h
281 IPSEC_FILTERGIF         opt_ipsec.h
282 FAST_IPSEC              opt_ipsec.h
283 IPDIVERT
284 DUMMYNET                opt_ipdn.h
285 IPFILTER                opt_ipfilter.h
286 IPFILTER_LOG            opt_ipfilter.h
287 IPFILTER_DEFAULT_BLOCK  opt_ipfilter.h
288 IPFIREWALL              opt_ipfw.h
289 IPFIREWALL_VERBOSE      opt_ipfw.h
290 IPFIREWALL_VERBOSE_LIMIT        opt_ipfw.h
291 IPFIREWALL_DEFAULT_TO_ACCEPT    opt_ipfw.h
292 IPFIREWALL_FORWARD              opt_ipfw.h
293 IPV6FIREWALL            opt_ip6fw.h
294 IPV6FIREWALL_VERBOSE    opt_ip6fw.h
295 IPV6FIREWALL_VERBOSE_LIMIT      opt_ip6fw.h
296 IPV6FIREWALL_DEFAULT_TO_ACCEPT  opt_ip6fw.h
297 IPSTEALTH
298 IPX                     opt_ipx.h
299 IPXIP                   opt_ipx.h
300 IPTUNNEL                opt_ipx.h
301 LIBMCHAIN
302 NCP                     opt_ncp.h
303 NETATALK                opt_atalk.h
304 NS                      opt_ns.h
305 PPP_BSDCOMP             opt_ppp.h
306 PPP_DEFLATE             opt_ppp.h
307 PPP_FILTER              opt_ppp.h
308 SLIP_IFF_OPTS           opt_slip.h
309 TCPDEBUG
310 TCP_DROP_SYNFIN         opt_tcp_input.h
311
312 XBONEHACK
313 MBUF_STRESS_TEST        opt_mbuf_stress_test.h
314
315 # Netgraph(4). Use option NETGRAPH to enable the base netgraph code.
316 # Each netgraph node type can be either be compiled into the kernel
317 # or loaded dynamically. To get the former, include the corresponding
318 # option below. Each type has its own man page, e.g. ng_async(8).
319 NETGRAPH
320 NETGRAPH_ASYNC          opt_netgraph.h
321 NETGRAPH_BPF            opt_netgraph.h
322 NETGRAPH_BRIDGE         opt_netgraph.h
323 NETGRAPH_CISCO          opt_netgraph.h
324 NETGRAPH_ECHO           opt_netgraph.h
325 NETGRAPH_EIFACE         opt_netgraph.h
326 NETGRAPH_ETHER          opt_netgraph.h
327 NETGRAPH_FRAME_RELAY    opt_netgraph.h
328 NETGRAPH_HOLE           opt_netgraph.h
329 NETGRAPH_IFACE          opt_netgraph.h
330 NETGRAPH_KSOCKET        opt_netgraph.h
331 NETGRAPH_LMI            opt_netgraph.h
332 NETGRAPH_L2TP           opt_netgraph.h
333 # MPPC compression requires proprietary files (not included)
334 NETGRAPH_MPPC_COMPRESSION       opt_netgraph.h
335 NETGRAPH_MPPC_ENCRYPTION        opt_netgraph.h
336 NETGRAPH_ONE2MANY       opt_netgraph.h
337 NETGRAPH_PPP            opt_netgraph.h
338 NETGRAPH_PPPOE          opt_netgraph.h
339 NETGRAPH_PPTPGRE        opt_netgraph.h
340 NETGRAPH_RFC1490        opt_netgraph.h
341 NETGRAPH_SOCKET         opt_netgraph.h
342 NETGRAPH_TEE            opt_netgraph.h
343 NETGRAPH_TTY            opt_netgraph.h
344 NETGRAPH_UI             opt_netgraph.h
345 NETGRAPH_VJC            opt_netgraph.h
346
347 # DRM options
348 DRM_DEBUG               opt_drm.h
349 DRM_LINUX               opt_drm.h
350
351 # ATM (HARP version)
352 ATM_CORE                opt_atm.h
353 ATM_IP                  opt_atm.h
354 ATM_SIGPVC              opt_atm.h
355 ATM_SPANS               opt_atm.h
356 ATM_UNI                 opt_atm.h
357
358 # XXX Conflict: # of devices vs network protocol (Native ATM).
359 # This makes "atm.h" unusable.
360 NATM                    opt_natm.h
361
362 # DPT driver debug flags
363 DPT_MEASURE_PERFORMANCE opt_dpt.h
364 DPT_HANDLE_TIMEOUTS     opt_dpt.h
365 DPT_TIMEOUT_FACTOR      opt_dpt.h
366 DPT_LOST_IRQ            opt_dpt.h
367 DPT_RESET_HBA           opt_dpt.h
368
369 # Misc debug flags.  Most of these should probably be replaced with
370 # 'DEBUG', and then let people recompile just the interesting modules
371 # with 'make CC="cc -DDEBUG"'.
372 CLUSTERDEBUG            opt_debug_cluster.h
373 DEBUG_1284              opt_ppb_1284.h
374 VP0_DEBUG               opt_vpo.h
375 LPT_DEBUG               opt_lpt.h
376 PLIP_DEBUG              opt_plip.h
377 LOCKF_DEBUG             opt_debug_lockf.h
378 LOUTB                   opt_debug_outb.h
379 NPX_DEBUG               opt_debug_npx.h
380 NETATALKDEBUG           opt_atalk.h
381 SI_DEBUG                opt_debug_si.h
382
383 # Fb options
384 FB_DEBUG                opt_fb.h
385 FB_INSTALL_CDEV         opt_fb.h
386
387 # ppbus related options
388 PERIPH_1284             opt_ppb_1284.h
389 DONTPROBE_1284          opt_ppb_1284.h
390
391 # smbus related options
392 ENABLE_ALART            opt_intpm.h
393
394 # These cause changes all over the kernel
395 BLKDEV_IOSIZE           opt_global.h
396 DEBUG                   opt_global.h
397 DEBUG_LOCKS             opt_global.h
398 DEBUG_CRIT_SECTIONS     opt_global.h
399 DIAGNOSTIC              opt_global.h
400 INVARIANTS              opt_global.h
401 SIMPLELOCK_DEBUG        opt_global.h
402 VFS_BIO_DEBUG           opt_global.h
403 DEBUG_INTERRUPTS        opt_global.h
404 SOCKBUF_DEBUG           opt_global.h
405 PANIC_DEBUG             opt_global.h
406 MBUF_DEBUG              opt_global.h
407
408 # Sample system/interrupt PC
409 DEBUG_PCTRACK           opt_pctrack.h
410
411 # These are VM related options
412 NO_SWAPPING             opt_vm.h
413 PQ_CACHESIZE            opt_vmpage.h
414
415 # Standard SMP options
416 SMP                     opt_global.h
417
418 # sys/netkey
419 KEY
420
421 # Size of the kernel message buffer
422 MSGBUF_SIZE             opt_msgbuf.h
423
424 # PCI related options
425 PCI_QUIET               opt_pci.h
426 PCI_ENABLE_IO_MODES     opt_pci.h
427 PCI_MAP_FIXUP           opt_pci.h
428 COMPAT_OLDPCI
429
430 # NFS options
431 NFS_MINATTRTIMO         opt_nfs.h
432 NFS_MAXATTRTIMO         opt_nfs.h
433 NFS_MINDIRATTRTIMO      opt_nfs.h
434 NFS_MAXDIRATTRTIMO      opt_nfs.h
435 NFS_GATHERDELAY         opt_nfs.h
436 NFS_UIDHASHSIZ          opt_nfs.h
437 NFS_WDELAYHASHSIZ       opt_nfs.h
438 NFS_MUIDHASHSIZ         opt_nfs.h
439 NFS_NOSERVER            opt_nfs.h
440 NFS_DEBUG               opt_nfs.h
441
442 # MSDOSFS options
443 MSDOSFS_DEBUG           opt_msdosfs.h
444
445 # For the Bt848/Bt848A/Bt849/Bt878/Bt879 driver
446 BROOKTREE_SYSTEM_DEFAULT        opt_bktr.h
447 BROOKTREE_ALLOC_PAGES           opt_bktr.h
448 BKTR_OVERRIDE_CARD              opt_bktr.h
449 BKTR_OVERRIDE_TUNER             opt_bktr.h
450 BKTR_OVERRIDE_DBX               opt_bktr.h
451 BKTR_OVERRIDE_MSP               opt_bktr.h
452 BKTR_SYSTEM_DEFAULT             opt_bktr.h
453 BKTR_ALLOC_PAGES                opt_bktr.h
454 BKTR_USE_PLL                    opt_bktr.h      
455 BKTR_GPIO_ACCESS                opt_bktr.h
456 BKTR_NO_MSP_RESET               opt_bktr.h
457 BKTR_430_FX_MODE                opt_bktr.h
458 BKTR_SIS_VIA_MODE               opt_bktr.h
459 BKTR_NEW_MSP34XX_DRIVER         opt_bktr.h
460
461 # meteor opt_meteor.h
462 METEOR_ALLOC_PAGES      opt_meteor.h
463 METEOR_TEST_VIDEO       opt_meteor.h
464 METEOR_SYSTEM_DEFAULT   opt_meteor.h
465 METEOR_DEALLOC_PAGES    opt_meteor.h
466 METEOR_DEALLOC_ABOVE    opt_meteor.h
467
468 # Various mi ISA bus flags
469 COMPAT_OLDISA           opt_compat_oldisa.h
470 COM_ESP                 opt_sio.h
471 COM_MULTIPORT           opt_sio.h
472 BREAK_TO_DEBUGGER       opt_comconsole.h
473 ALT_BREAK_TO_DEBUGGER   opt_comconsole.h
474
475 # options for bus/device framework
476 BUS_DEBUG               opt_bus.h
477 DEVICE_SYSCTLS          opt_bus.h
478
479 # options for USB support
480 OHCI_DEBUG              opt_usb.h
481 USB_DEBUG               opt_usb.h
482
483 # Vinum options
484 VINUMDEBUG              opt_vinum.h
485
486 # Embedded system options
487 UKBD_DFLT_KEYMAP        opt_ukbd.h
488 INIT_PATH               opt_init_path.h
489
490 ROOTDEVNAME             opt_rootdevname.h
491
492 FDC_DEBUG               opt_fdc.h
493 PCFCLOCK_VERBOSE        opt_pcfclock.h
494 PCFCLOCK_MAX_RETRIES    opt_pcfclock.h
495
496 # Polling device handling
497 DEVICE_POLLING          opt_polling.h
498
499 # options for ubsec driver
500 UBSEC_DEBUG             opt_ubsec.h
501 UBSEC_RNDTEST           opt_ubsec.h
502 UBSEC_NO_RNG            opt_ubsec.h
503
504 # options for hifn driver
505 HIFN_DEBUG              opt_hifn.h
506 HIFN_RNDTEST            opt_hifn.h
507 HIFN_NO_RNG             opt_hifn.h
508
509 # KTR options
510 KTR                             opt_global.h
511 KTR_ALL                         opt_ktr.h
512 KTR_TOKENS                      opt_ktr.h
513 KTR_MEMORY                      opt_ktr.h
514 KTR_USB_MEMORY                  opt_ktr.h
515 KTR_IPIQ                        opt_ktr.h
516 KTR_MSGPORT                     opt_ktr.h
517 KTR_ENTRIES                     opt_global.h
518 KTR_VERBOSE                     opt_ktr.h
519 KTR_GIANT_CONTENTION            opt_ktr.h
520 KTR_SPIN_CONTENTION             opt_ktr.h
521 KTR_IF_BGE                      opt_ktr.h
522 KTR_IF_EM                       opt_ktr.h
523
524 # bce driver
525 BCE_DEBUG               opt_bce.h
526 BCE_NVRAM_WRITE_SUPPORT opt_bce.h
527
528 # ed driver
529 ED_NO_MIIBUS            opt_ed.h
530
531 # wi driver
532 WI_SYMBOL_FIRMWARE      opt_wi.h
533
534 # dcons options
535 DCONS_BUF_SIZE          opt_dcons.h
536 DCONS_POLL_HZ           opt_dcons.h
537 DCONS_FORCE_CONSOLE     opt_dcons.h
538 DCONS_FORCE_GDB         opt_dcons.h
539
540 # deprecated drivers and options
541 I_WANT_DEPRECATED_STUFF opt_deprecated.h
542
543 # SCTP
544 SCTP                    opt_sctp.h
545 SCTP_DEBUG              opt_sctp.h
546 SCTP_USE_ADLER32        opt_sctp.h
547 SCTP_HIGH_SPEED         opt_sctp.h
548 SCTP_STAT_LOGGING       opt_sctp.h
549 SCTP_CWND_LOGGING       opt_sctp.h
550 SCTP_BLK_LOGGING        opt_sctp.h
551 SCTP_STR_LOGGING        opt_sctp.h
552 SCTP_FR_LOGGING         opt_sctp.h
553 SCTP_MAP_LOGGING        opt_sctp.h
554
555 # syslink kernel support
556 #
557 SYSLINK                 opt_syslink.h