rc.d/devfs: Add missing line termination.
[dragonfly.git] / Makefile.inc1
1 #
2 # $FreeBSD: src/Makefile.inc1,v 1.141.2.62 2003/04/06 19:54:00 dwmalone Exp $
3 # $DragonFly: src/Makefile.inc1,v 1.118 2008/06/24 20:22:30 thomas Exp $
4 #
5 # Build-time options are documented in make.conf(5).
6 #
7 # The intended user-driven targets are:
8 #
9 # buildworld  - rebuild *everything*, including glue to help do upgrades
10 # quickworld  - skip the glue and do a depend+build on the meat
11 # realquickworld - skip the glue and depend stages and just build the meat
12 # crossworld  - only build the glue (particularly the cross-build environment)
13 # installworld- install everything built by "buildworld"
14 # most        - build user commands, no libraries or include files
15 # installmost - install user commands, no libraries or include files
16 #
17 # Standard targets (not defined here) are documented in the makefiles in
18 # /usr/share/mk.  These include:
19 #               obj depend all install clean cleandepend cleanobj
20
21 # Put initial settings here.
22 SUBDIR=
23
24 # We must do share/info early so that installation of info `dir'
25 # entries works correctly.  Do it first since it is less likely to
26 # grow dependencies on include and lib than vice versa.
27 .if exists(${.CURDIR}/share/info)
28 SUBDIR+= share/info
29 .endif
30
31 # We must do include and lib early so that the perl *.ph generation
32 # works correctly as it uses the header files installed by this.
33 .if exists(${.CURDIR}/include)
34 SUBDIR+= include
35 .endif
36 .if exists(${.CURDIR}/lib)
37 SUBDIR+= lib
38 .endif
39 # This exists simply to ensure that the obj dir hierarchy is
40 # intact for nrelease, allowing the nrelease Makefile's to 
41 # reference ${.OBJDIR}.
42 #
43 .if exists(${.CURDIR}/nrelease)
44 SUBDIR+= nrelease
45 .endif
46
47 .if exists(${.CURDIR}/bin)
48 SUBDIR+= bin
49 .endif
50 .if exists(${.CURDIR}/games) && !defined(NO_GAMES)
51 SUBDIR+= games
52 .endif
53 .if exists(${.CURDIR}/gnu)
54 SUBDIR+= gnu
55 .endif
56 .if exists(${.CURDIR}/libexec)
57 SUBDIR+= libexec
58 .endif
59 .if exists(${.CURDIR}/sbin)
60 SUBDIR+= sbin
61 .endif
62 .if exists(${.CURDIR}/secure) && !defined(NO_CRYPT)
63 SUBDIR+= secure
64 .endif
65 .if exists(${.CURDIR}/share) && !defined(NO_SHARE)
66 SUBDIR+= share
67 .endif
68 .if exists(${.CURDIR}/sys)
69 SUBDIR+= sys
70 .endif
71 .if exists(${.CURDIR}/usr.bin)
72 SUBDIR+= usr.bin
73 .endif
74 .if exists(${.CURDIR}/usr.sbin)
75 SUBDIR+= usr.sbin
76 .endif
77
78 .if exists(${.CURDIR}/etc)
79 SUBDIR+= etc
80 .endif
81
82 # These are last, since it is nice to at least get the base system
83 # rebuilt before you do them.
84 .if defined(LOCAL_DIRS)
85 .for _DIR in ${LOCAL_DIRS}
86 .if exists(${.CURDIR}/${_DIR}) & exists(${.CURDIR}/${_DIR}/Makefile)
87 SUBDIR+= ${_DIR}
88 .endif
89 .endfor
90 .endif
91
92 .if defined(SUBDIR_OVERRIDE)
93 SUBDIR=         ${SUBDIR_OVERRIDE}
94 .endif
95
96 .if defined(NOCLEANDIR)
97 CLEANDIR=       clean cleandepend
98 .else
99 CLEANDIR=       cleandir
100 .endif
101
102 .if defined(NO_CLEAN)
103 NOCLEAN=        # defined
104 .endif
105
106 # Object directory base in primary make.  Note that when we rerun make
107 # from inside this file we change MAKEOBJDIRPREFIX to the appropriate
108 # subdirectory because the rest of the build system needs it that way.
109 # The original object directory base is saved in OBJTREE.
110 #
111 MAKEOBJDIRPREFIX?=      /usr/obj
112 OBJTREE?=               ${MAKEOBJDIRPREFIX}
113
114 # Used for stage installs and pathing
115 #
116 DESTDIRBASE?=           ${OBJTREE}${.CURDIR}
117
118 # Remove DESTDIR from MAKEFLAGS.  It is present in the environment
119 # anyhow, and we need to be able to override it for stage installs
120 .MAKEFLAGS:=    ${.MAKEFLAGS:NDESTDIR=*}
121
122 # This sets the compiler we use to build the world/kernel with
123 WORLD_CCVER?=   gcc41
124
125 TARGET_ARCH?=   ${MACHINE_ARCH}
126 .if ${TARGET_ARCH} == ${MACHINE_ARCH}
127 TARGET?=        ${MACHINE}
128 .else
129 TARGET?=        ${TARGET_ARCH}
130 .endif
131 .if make(buildworld)
132 BUILD_ARCH!=    sysctl -n hw.machine_arch
133 .if ${MACHINE_ARCH} != ${BUILD_ARCH}
134 .error To cross-build, set TARGET_ARCH.
135 .endif
136 .endif
137
138 # Backwards compatibility with older make's or older sys.mk's.  make
139 # is expected to define MACHINE_PLATFORM.
140 #
141 .if !defined(MACHINE_PLATFORM)
142 MACHINE_PLATFORM= pc32
143 .endif
144
145 # XXX this is ugly and we need to come up with a nicer solution
146 .if !defined(TARGET_PLATFORM)
147 .if ${TARGET_ARCH} == "i386"
148 TARGET_PLATFORM= pc32
149 .elif ${TARGET_ARCH} == "amd64"
150 TARGET_PLATFORM= pc64
151 .else
152 .error Unknown target architecture.
153 .endif
154 .endif
155
156 THREAD_LIB?=    thread_xu
157 .if ${THREAD_LIB} == "c_r"
158 .if defined(NO_LIBC_R)
159 .error libc_r is chosen as the default thread library, but NO_LIBC_R is defined
160 .endif
161 .endif
162
163 # BTOOLS        (Natively built) All non-cross-development tools that the
164 #               main build needs.  This includes things like 'mkdir' and 'rm'.
165 #               We will not use the native system's exec path once we start
166 #               on WORLD.  (bootstrap-tools and build-tools or BTOOLS)
167 #
168 # CTOOLS        (Natively built) Cross development tools which are specific
169 #               to the target architecture.
170 #
171 # WORLD         (Cross built) Our ultimate buildworld, using only BTOOLS and
172 #               CTOOLS.
173 #
174 # MACHINE_PLATFORM Platform Architecture we are building on
175 # MACHINE       Machine Architecture (usually the same as MACHINE_ARCH)
176 # MACHINE_ARCH  Cpu Architecture we are building on
177 #
178 # TARGET_PLATFORM Platform Architecture we are building for
179 # TARGET        Machine Architecture we are building for
180 # TARGET_ARCH   Cpu Architecture we are building for
181 #
182 BTOOLSDEST=     ${DESTDIRBASE}/btools_${MACHINE_ARCH}
183 CTOOLSDEST=     ${DESTDIRBASE}/ctools_${MACHINE_ARCH}_${TARGET_ARCH}
184 WORLDDEST=      ${DESTDIRBASE}/world_${TARGET_ARCH}
185
186 # The bootstrap-tools path is used by the bootstrap-tools, build-tools, and
187 # cross-tools stages to augment the existing command path to access newer
188 # versions of certain utilities such as 'patch' that the cross-tools stage
189 # might expect.
190 #
191 BTOOLSPATH= ${BTOOLSDEST}/usr/sbin:${BTOOLSDEST}/usr/bin:${BTOOLSDEST}/bin:${BTOOLSDEST}/usr/games
192
193 # The strict temporary command path contains all binaries required
194 # by the buildworld system after the cross-tools stage.
195 #
196 STRICTTMPPATH=  ${CTOOLSDEST}/usr/sbin:${CTOOLSDEST}/usr/bin:${CTOOLSDEST}/bin:${CTOOLSDEST}/usr/games:${BTOOLSDEST}/usr/sbin:${BTOOLSDEST}/usr/bin:${BTOOLSDEST}/bin:${BTOOLSDEST}/usr/games
197
198 TMPDIR?=        /tmp
199 TMPPID!=        echo $$$$
200
201 #
202 # Building a world goes through the following stages
203 #
204 # 1. bootstrap-tool stage [BMAKE]
205 #       This stage is responsible for creating programs that
206 #       are needed for backward compatibility reasons. They
207 #       are not built as cross-tools.
208 # 2. build-tool stage [TMAKE]
209 #       This stage is responsible for creating the object
210 #       tree and building any tools that are needed during
211 #       the build process.
212 # 3. cross-tool stage [XMAKE]
213 #       This stage is responsible for creating any tools that
214 #       are needed for cross-builds. A cross-compiler is one
215 #       of them.
216 # 4. world stage [WMAKE]
217 #       This stage actually builds the world.
218 # 5. install stage (optional) [IMAKE]
219 #       This stage installs a previously built world.
220 #
221
222 # bootstrap-tool stage
223 #
224 BMAKEENV=       MAKEOBJDIRPREFIX=${BTOOLSDEST} \
225                 OBJTREE=${OBJTREE} \
226                 DESTDIR=${BTOOLSDEST} \
227                 PATH=${BTOOLSPATH}:${PATH} \
228                 INSTALL="sh ${.CURDIR}/tools/install.sh"
229
230 BMAKE=          ${BMAKEENV} ${MAKE} -f Makefile.inc1 -DBOOTSTRAPPING \
231                 -DNOINFO -DNOMAN -DNOPIC -DNOPROFILE -DNOSHARED \
232                 -DNO_WERROR -DNO_NLS
233
234 # build-tool stage
235 #
236 TMAKEENV=       MAKEOBJDIRPREFIX=${BTOOLSDEST} \
237                 OBJTREE=${OBJTREE} \
238                 DESTDIR= \
239                 PATH=${BTOOLSPATH}:${PATH} \
240                 INSTALL="sh ${.CURDIR}/tools/install.sh"
241
242 TMAKE=          ${TMAKEENV} ${MAKE} -f Makefile.inc1 -DBOOTSTRAPPING \
243                 -DNO_FORTRAN -DNOSHARED
244
245 # cross-tool stage
246 #
247 # note: TOOLS_PREFIX points to the obj root holding the cross
248 #       compiler binaries, while USRDATA_PREFIX points to the obj root 
249 #       holding the target environment (and also determines where cross-built
250 #       libraries, crt*.o, and include files are installed).
251 #
252 XMAKEENV=       MAKEOBJDIRPREFIX=${CTOOLSDEST} \
253                 OBJTREE=${OBJTREE} \
254                 DESTDIR=${CTOOLSDEST} \
255                 INSTALL="sh ${.CURDIR}/tools/install.sh" \
256                 TOOLS_PREFIX=${CTOOLSDEST} \
257                 USRDATA_PREFIX=${WORLDDEST} \
258                 PATH=${BTOOLSPATH}:${PATH}
259
260 XMAKE=          ${XMAKEENV} ${MAKE} -f Makefile.inc1 -DNO_FORTRAN -DNO_GDB \
261                 -DBOOTSTRAPPING -DNOSHARED
262
263 # world stage, note the strict path and note that TOOLS_PREFIX is left
264 # unset and USRDATA_PREFIX (which defaults to TOOLS_PREFIX) is set to empty,
265 # which is primarily for the compiler so it targets / (e.g. /usr/<blah>)
266 # for both binary and library paths, even though it is being compiled to
267 # WORLDDEST.  None of the programs in the world stage are ever actually
268 # executed during the buildworld/installworld.
269 #
270 CROSSENV=       MAKEOBJDIRPREFIX=${WORLDDEST} \
271                 OBJTREE=${OBJTREE} \
272                 MACHINE_ARCH=${TARGET_ARCH} \
273                 MACHINE=${TARGET} \
274                 MACHINE_PLATFORM=${TARGET_PLATFORM} \
275                 OBJFORMAT_PATH=${CTOOLSDEST} \
276                 HOST_CCVER=${HOST_CCVER} \
277                 CCVER=${WORLD_CCVER}
278
279 WMAKEENV=       ${CROSSENV} \
280                 DESTDIR=${WORLDDEST} \
281                 INSTALL="sh ${.CURDIR}/tools/install.sh" \
282                 PATH=${STRICTTMPPATH}
283
284 WMAKE=          ${WMAKEENV} ${MAKE} -f Makefile.inc1
285
286 # install stage
287 #
288 IMAKEENV=       ${CROSSENV} \
289                 PATH=${STRICTTMPPATH}
290 IMAKE=          ${IMAKEENV} ${MAKE} -f Makefile.inc1
291
292 # kernel stage
293 #
294 KMAKEENV=       ${WMAKEENV}
295
296 # buildworld
297 #
298 # Attempt to rebuild the entire system, with reasonable chance of
299 # success, regardless of how old your existing system is.
300 #
301 _worldtmp:
302         @echo
303         @echo "--------------------------------------------------------------"
304         @echo ">>> Rebuilding the temporary build tree"
305         @echo "--------------------------------------------------------------"
306 .if !defined(NOCLEAN)
307         rm -rf ${BTOOLSDEST} ${CTOOLSDEST} ${WORLDDEST}
308 .else
309         # XXX - These two can depend on any header file.
310         rm -f ${OBJTREE}${.CURDIR}/usr.bin/kdump/ioctl.c
311         rm -f ${OBJTREE}${.CURDIR}/usr.bin/truss/ioctl.c
312 .endif
313         mkdir -p ${DESTDIRBASE} ${BTOOLSDEST} ${CTOOLSDEST} ${WORLDDEST}
314 .for _dir in ${WORLDDEST} ${BTOOLSDEST} ${CTOOLSDEST}
315         mtree -deU -f ${.CURDIR}/etc/mtree/BSD.root.dist        \
316                 -p ${_dir}/  > /dev/null
317         mtree -deU -f ${.CURDIR}/etc/mtree/BSD.usr.dist         \
318                 -p ${_dir}/usr > /dev/null
319 .endfor
320         mtree -deU -f ${.CURDIR}/etc/mtree/BSD.include.dist     \
321                 -p ${WORLDDEST}/usr/include > /dev/null
322         ${LN} -sf ${.CURDIR}/sys ${WORLDDEST}
323
324 _bootstrap-tools:
325         @echo
326         @echo "--------------------------------------------------------------"
327         @echo ">>> stage 1: bootstrap tools"
328         @echo "--------------------------------------------------------------"
329         cd ${.CURDIR}; ${BMAKE} bootstrap-tools
330 _cleanobj:
331         @echo
332         @echo "--------------------------------------------------------------"
333         @echo ">>> stage 2a: cleaning up the object tree"
334         @echo "--------------------------------------------------------------"
335         cd ${.CURDIR}; ${WMAKE} ${CLEANDIR:S/^/par-/}
336 _obj:
337         @echo
338         @echo "--------------------------------------------------------------"
339         @echo ">>> stage 2b: rebuilding the object tree"
340         @echo "--------------------------------------------------------------"
341         cd ${.CURDIR}; ${WMAKE} par-obj
342 _build-tools:
343         @echo
344         @echo "--------------------------------------------------------------"
345         @echo ">>> stage 2c: build tools"
346         @echo "--------------------------------------------------------------"
347         cd ${.CURDIR}; ${TMAKE} build-tools
348 _cross-tools:
349         @echo
350         @echo "--------------------------------------------------------------"
351         @echo ">>> stage 3: cross tools"
352         @echo "--------------------------------------------------------------"
353         cd ${.CURDIR}; ${XMAKE} cross-tools
354 _includes:
355         @echo
356         @echo "--------------------------------------------------------------"
357         @echo ">>> stage 4a: populating ${WORLDDEST}/usr/include"
358         @echo "--------------------------------------------------------------"
359         cd ${.CURDIR}; ${WMAKE} SHARED=symlinks par-includes
360 _libraries:
361         @echo
362         @echo "--------------------------------------------------------------"
363         @echo ">>> stage 4b: building libraries"
364         @echo "--------------------------------------------------------------"
365         cd ${.CURDIR}; ${WMAKE} -DNOHTML -DNOINFO -DNOMAN -DNOFSCHG libraries
366 _depend:
367         @echo
368         @echo "--------------------------------------------------------------"
369         @echo ">>> stage 4c: make dependencies"
370         @echo "--------------------------------------------------------------"
371         cd ${.CURDIR}; ${WMAKE} par-depend
372 everything:
373         @echo
374         @echo "--------------------------------------------------------------"
375         @echo ">>> stage 4d: building everything.."
376         @echo "--------------------------------------------------------------"
377         cd ${.CURDIR}; ${WMAKE} all
378
379 # note: buildworld no longer depends on _cleanobj because we rm -rf the
380 # entire object tree and built the bootstrap tools in a different location.
381 #
382 # buildworld    - build everything from scratch
383 # quickworld    - skip the bootstrap, build, and cross-build steps
384 # realquickworld - skip the bootstrap, build, crossbuild, and depend step.
385 #
386 # note: we include _obj in realquickworld to prevent accidental creation
387 # of files in /usr/src.
388
389 WMAKE_TGTS=
390 .if !defined(SUBDIR_OVERRIDE)
391 WMAKE_TGTS+=    _worldtmp _bootstrap-tools
392 .endif
393 WMAKE_TGTS+=    _obj _build-tools
394 .if !defined(SUBDIR_OVERRIDE)
395 WMAKE_TGTS+=    _cross-tools
396 .endif
397 WMAKE_TGTS+=    _includes _libraries _depend everything
398
399 buildworld: ${WMAKE_TGTS}
400
401 quickworld: _obj _includes _libraries _depend everything
402
403 realquickworld: _obj _includes _libraries everything
404
405 crossworld: _worldtmp _bootstrap-tools _obj _build-tools _cross-tools
406
407 .ORDER: ${WMAKE_TGTS}
408 .ORDER: _obj _includes
409
410 #
411 # installcheck
412 #
413 # Checks to be sure system is ready for installworld
414 #
415 installcheck:
416 .if !defined(NO_SENDMAIL)
417         @pw usershow smmsp || (echo "You may need to run 'make preupgrade' first"; exit 1)
418         @pw groupshow smmsp || (echo "You may need to run 'make preupgrade' first"; exit 1)
419 .endif
420         @pw usershow _pflogd || (echo "You may need to run 'make preupgrade' first"; exit 1)
421         @pw groupshow authpf || (echo "You may need to run 'make preupgrade' first"; exit 1)
422         @pw groupshow _pflogd || (echo "You may need to run 'make preupgrade' first"; exit 1)
423 .if !defined(DESTDIR) || ${DESTDIR} == "" || ${DESTDIR} == "/"
424         @case `uname -r` in 1.2*|1.3-*|1.3.*|1.4.*|1.5.0-*|1.5.1-*|1.5.2-*|1.5.3-*) echo "You must upgrade your kernel to at least 1.5.4 and reboot before you can safely installworld, due to libc/system call ABI changes" ; exit 1;; esac
425 .endif
426 #
427 # installworld
428 #
429 # Installs everything compiled by a 'buildworld'.
430 #
431 installworld: installcheck
432         cd ${.CURDIR}; ${IMAKE} re${.TARGET:S/world$//}
433         ${INSTALL} -o root -g wheel -m 644 ${.CURDIR}/Makefile_upgrade.inc ${DESTDIR}/etc/upgrade/
434
435 #
436 # reinstall
437 #
438 # If you have a build server, you can NFS mount the source and obj directories
439 # and do a 'make reinstall' on the *client* to install new binaries from the
440 # most recent server build.
441 #
442 reinstall:
443         @echo "--------------------------------------------------------------"
444         @echo ">>> Making hierarchy"
445         @echo "--------------------------------------------------------------"
446         cd ${.CURDIR}; ${MAKE} -f Makefile.inc1 hierarchy
447         @echo
448         @echo "--------------------------------------------------------------"
449         @echo ">>> Installing everything.."
450         @echo "--------------------------------------------------------------"
451         cd ${.CURDIR}; ${MAKE} -f Makefile.inc1 install
452 .if !defined(NOMAN) && !defined(NO_MAKEDB_RUN)
453         @echo
454         @echo "--------------------------------------------------------------"
455         @echo ">>> Rebuilding man page indices"
456         @echo "--------------------------------------------------------------"
457         cd ${.CURDIR}/share/man; ${MAKE} makedb
458 .endif
459
460 #
461 # buildkernel, nativekernel, quickkernel, and installkernel
462 #
463 # Which kernels to build and/or install is specified by setting
464 # KERNCONF. If not defined a GENERIC kernel is built/installed.
465 # Only the existing (depending TARGET) config files are used
466 # for building kernels and only the first of these is designated
467 # as the one being installed.
468 #
469 # You can specify INSTALLSTRIPPED=1 if you wish the installed 
470 # kernel and modules to be stripped of its debug info (required
471 # symbols are left intact).  You can specify INSTALLSTRIPPEDMODULES
472 # if you only want to strip the modules of their debug info.  These
473 # only apply if you have DEBUG=-g in your kernel config or make line.
474 #
475 # Note that we have to use TARGET instead of TARGET_ARCH when
476 # we're in kernel-land. Since only TARGET_ARCH is (expected) to
477 # be set to cross-build, we have to make sure TARGET is set
478 # properly.
479
480 .if !defined(KERNCONF) && defined(KERNEL)
481 KERNCONF=       ${KERNEL}
482 KERNWARN=       yes
483 .else
484 # XXX makeshift fix to build the right kernel for the (target) architecture
485 # We should configure this in the platform files somehow
486 .if ${TARGET_ARCH} == "i386"
487 KERNCONF?=      GENERIC
488 .else
489 KERNCONF?=      AMD64_GENERIC
490 .endif
491 .endif
492 INSTKERNNAME?=  kernel
493
494 KRNLSRCDIR=     ${.CURDIR}/sys
495 KRNLCONFDIR=    ${KRNLSRCDIR}/config
496 KRNLOBJDIR=     ${OBJTREE}${KRNLSRCDIR}
497 KERNCONFDIR?=   ${KRNLCONFDIR}
498
499 BUILDKERNELS=
500 INSTALLKERNEL=
501 .for _kernel in ${KERNCONF}
502 .if exists(${KERNCONFDIR}/${_kernel})
503 BUILDKERNELS+=  ${_kernel}
504 .if empty(INSTALLKERNEL)
505 INSTALLKERNEL= ${_kernel}
506 .endif
507 .endif
508 .endfor
509
510 # kernel version numbers survive rm -rf
511 #
512 .for _kernel in ${BUILDKERNELS}
513 .if exists(${KRNLOBJDIR}/${_kernel}/version)
514 KERNEL_VERSION_${_kernel} != cat ${KRNLOBJDIR}/${_kernel}/version
515 .endif
516 .endfor
517
518 #
519 # buildkernel
520 #
521 # Builds all kernels defined by BUILDKERNELS.
522 #
523 bk_tools:
524         @if [ ! -f ${WORLDDEST}/.libraries_done ]; then \
525             echo "You must buildworld before buildkernel.  If you wish"; \
526             echo "to build a kernel using native tools, config it manually"; \
527             echo "or use the nativekernel target if you are in a rush"; \
528             exit 1; \
529         fi
530
531 maybe_bk_tools:
532 .for _kernel in ${BUILDKERNELS}
533         @if [ ! -f ${KRNLOBJDIR}/${_kernel}/.nativekernel_run ]; then \
534             if [ ! -f ${WORLDDEST}/.libraries_done ]; then \
535                 echo "The kernel was build using buildworld tools which no" ; \
536                 echo "longer appear to exist, quickkernel failed!" ; \
537                 exit 1; \
538             fi; \
539         fi
540 .endfor
541
542 bk_build_list:
543 .if empty(BUILDKERNELS)
544         @echo ">>> ERROR: Missing kernel configuration file(s) (${KERNCONF})."
545         @echo ">>> Did you move your kernel configs from i386/conf to config/?"
546         @false
547 .endif
548
549 bk_kernwarn:
550 .if defined(KERNWARN)
551         @echo "--------------------------------------------------------------"
552         @echo ">>> WARNING: KERNEL= setting should be changed to KERNCONF="
553         @echo "--------------------------------------------------------------"
554         @sleep 3
555 .endif
556         @echo
557
558 # The buildkernel target rebuilds the specified kernels from scratch
559 # using the crossbuild tools generated by the last buildworld.  It is
560 # the safest (but also the most time consuming) way to build a new kernel.
561 #
562 buildkernel:    bk_tools bk_build_list bk_kernwarn
563 .for _kernel in ${BUILDKERNELS}
564         @echo "--------------------------------------------------------------"
565         @echo ">>> Kernel build for ${_kernel} started on `LC_ALL=C date`"
566         @echo "--------------------------------------------------------------"
567         @echo "===> ${_kernel}"
568 .if !defined(NOCLEAN) && !defined(NO_KERNELCLEAN)
569         rm -rf ${KRNLOBJDIR}/${_kernel}
570 .else
571         @if [ -f ${KRNLOBJDIR}/${_kernel}/.nativekernel_run ]; then \
572                 echo "YOU ARE REBUILDING WITH BUILDKERNEL, REMOVING OLD NATIVEKERNEL BUILD"; \
573                 rm -rf ${KRNLOBJDIR}/${_kernel}; fi
574 .endif
575         mkdir -p ${KRNLOBJDIR}
576 .if !defined(NO_KERNELCONFIG)
577         cd ${KRNLCONFDIR}; \
578                 PATH=${STRICTTMPPATH} \
579                     config ${CONFIGARGS} -d ${KRNLOBJDIR}/${_kernel} \
580                         ${KERNCONFDIR}/${_kernel}
581 .endif
582 .if !defined(NOCLEAN) && !defined(NO_KERNELCLEAN) && defined(KERNEL_VERSION_${_kernel})
583         echo ${KERNEL_VERSION_${_kernel}} > ${KRNLOBJDIR}/${_kernel}/version
584 .endif
585         touch ${KRNLOBJDIR}/${_kernel}/.buildkernel_run
586 .if !defined(NO_KERNELDEPEND)
587         cd ${KRNLOBJDIR}/${_kernel}; \
588             ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} depend
589 .endif
590         cd ${KRNLOBJDIR}/${_kernel}; \
591             ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} all
592         @echo "--------------------------------------------------------------"
593         @echo ">>> Kernel build for ${_kernel} completed on `LC_ALL=C date`"
594         @echo "--------------------------------------------------------------"
595 .endfor
596
597 # The nativekernel target rebuilds the specified kernels from scratch
598 # using the system's standard compiler rather than using the crossbuild
599 # tools generated by the last buildworld.  This is fairly safe if your
600 # system is reasonable up-to-date.
601 #
602 nativekernel:   bk_build_list bk_kernwarn
603 .for _kernel in ${BUILDKERNELS}
604         @echo "--------------------------------------------------------------"
605         @echo ">>> Kernel build for ${_kernel} started on `LC_ALL=C date`"
606         @echo "--------------------------------------------------------------"
607         @echo "===> ${_kernel}"
608 .if !defined(NOCLEAN) && !defined(NO_KERNELCLEAN)
609         rm -rf ${KRNLOBJDIR}/${_kernel}
610 .else
611         @if [ -f ${KRNLOBJDIR}/${_kernel}/.buildkernel_run ]; then \
612                 echo "YOU ARE REBUILDING WITH NATIVEKERNEL, REMOVING OLD BUILDKERNEL BUILD"; \
613                 rm -rf ${KRNLOBJDIR}/${_kernel}; fi
614 .endif
615         mkdir -p ${KRNLOBJDIR}
616 .if !defined(NO_KERNELCONFIG)
617         cd ${KRNLCONFDIR}; \
618                     config ${CONFIGARGS} -d ${KRNLOBJDIR}/${_kernel} \
619                         ${KERNCONFDIR}/${_kernel}
620 .endif
621 .if !defined(NOCLEAN) && !defined(NO_KERNELCLEAN) && defined(KERNEL_VERSION_${_kernel})
622         echo ${KERNEL_VERSION_${_kernel}} > ${KRNLOBJDIR}/${_kernel}/version
623 .endif
624         touch ${KRNLOBJDIR}/${_kernel}/.nativekernel_run
625         cd ${KRNLOBJDIR}/${_kernel}; \
626             MAKESRCPATH=${KRNLSRCDIR}/dev/disk/aic7xxx/aicasm \
627             ${MAKE} -DBOOTSTRAPPING -f ${KRNLSRCDIR}/dev/disk/aic7xxx/aicasm/Makefile
628 .if !defined(NO_KERNELDEPEND)
629         cd ${KRNLOBJDIR}/${_kernel}; \
630             ${MAKE} KERNEL=${INSTKERNNAME} depend
631 .endif
632         cd ${KRNLOBJDIR}/${_kernel}; \
633             ${MAKE} KERNEL=${INSTKERNNAME} all
634         @echo "--------------------------------------------------------------"
635         @echo ">>> Kernel build for ${_kernel} completed on `LC_ALL=C date`"
636         @echo "--------------------------------------------------------------"
637 .endfor
638
639 # The quickkernel target rebuilds the specified kernels as quickly
640 # as possible.  It will use the native tools or the buildworld cross tools
641 # based on whether the kernel was originally generated via buildkernel or
642 # nativekernel.  Config is rerun but the object hierarchy is not rebuilt,
643 # nor is the make depend step run.
644 #
645 quickkernel:    maybe_bk_tools bk_build_list bk_kernwarn
646 .for _kernel in ${BUILDKERNELS}
647         @echo "--------------------------------------------------------------"
648         @echo ">>> Kernel build for ${_kernel} started on `LC_ALL=C date`"
649         @echo "--------------------------------------------------------------"
650         @echo "===> ${_kernel}"
651 .if exists(${KRNLOBJDIR}/${_kernel}/.buildkernel_run)
652 .if !defined(NO_KERNELCONFIG)
653         cd ${KRNLCONFDIR}; \
654                 PATH=${STRICTTMPPATH} \
655                     config ${CONFIGARGS} -d ${KRNLOBJDIR}/${_kernel} \
656                         ${KERNCONFDIR}/${_kernel}
657 .endif
658         cd ${KRNLOBJDIR}/${_kernel}; \
659             ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} all
660 .else
661 .if !defined(NO_KERNELCONFIG)
662         cd ${KRNLCONFDIR}; \
663             config ${CONFIGARGS} -d ${KRNLOBJDIR}/${_kernel} \
664                 ${KERNCONFDIR}/${_kernel}
665 .endif
666         cd ${KRNLOBJDIR}/${_kernel}; \
667             ${MAKE} KERNEL=${INSTKERNNAME} all
668 .endif
669         @echo "--------------------------------------------------------------"
670         @echo ">>> Kernel build for ${_kernel} completed on `LC_ALL=C date`"
671         @echo "--------------------------------------------------------------"
672 .endfor
673
674
675 # installkernel
676 #
677 # Install the kernel defined by INSTALLKERNEL
678 #
679 installkernel reinstallkernel:
680         @echo "--------------------------------------------------------------"
681         @echo ">>> Kernel install for ${INSTALLKERNEL} started on `LC_ALL=C date`"
682         @echo "--------------------------------------------------------------"
683 .if exists(${KRNLOBJDIR}/${INSTALLKERNEL}/.buildkernel_run)
684         cd ${KRNLOBJDIR}/${INSTALLKERNEL}; \
685             ${IMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} ${.TARGET:S/kernel$//}
686 .else
687         cd ${KRNLOBJDIR}/${INSTALLKERNEL}; \
688             ${MAKE} KERNEL=${INSTKERNNAME} ${.TARGET:S/kernel$//}
689 .endif
690
691 #
692 # most
693 #
694 # Build most of the user binaries on the existing system libs and includes.
695 #
696 most:
697         @echo "--------------------------------------------------------------"
698         @echo ">>> Building programs only"
699         @echo "--------------------------------------------------------------"
700 .for _dir in bin sbin libexec usr.bin usr.sbin gnu/libexec gnu/usr.bin gnu/usr.sbin
701         cd ${.CURDIR}/${_dir};          ${MAKE} DIRPRFX=${_dir}/ all
702 .endfor
703
704 #
705 # installmost
706 #
707 # Install the binaries built by the 'most' target.  This does not include
708 # libraries or include files.
709 #
710 installmost:
711         @echo "--------------------------------------------------------------"
712         @echo ">>> Installing programs only"
713         @echo "--------------------------------------------------------------"
714 .for _dir in bin sbin libexec usr.bin usr.sbin gnu/libexec gnu/usr.bin gnu/usr.sbin
715         cd ${.CURDIR}/${_dir};          ${MAKE} DIRPRFX=${_dir}/ install
716 .endfor
717
718 #
719 # ------------------------------------------------------------------------
720 #
721 # From here onwards are utility targets used by the 'make world' and
722 # related targets.  If your 'world' breaks, you may like to try to fix
723 # the problem and manually run the following targets to attempt to
724 # complete the build.  Beware, this is *not* guaranteed to work, you
725 # need to have a pretty good grip on the current state of the system
726 # to attempt to manually finish it.  If in doubt, 'make world' again.
727 #
728
729 # bootstrap-tools: Build all tools required to build all tools.  Note that
730 # order is important in a number of cases and also note that the bootstrap
731 # and build tools stages have access to earlier binaries they themselves
732 # had generated.
733 #
734 # patch:        older patch's do not have -i.  This program must be built
735 #               first so other bootstrap tools that need to apply patches
736 #               can use it.
737 # [x]install:   dependancies on various new install features
738 # rpcgen:       old rpcgen used a hardwired cpp path, newer OBJFORMAT_PATH
739 #               envs are not compatible with older objformat binaries.
740 #
741 .if exists(${.CURDIR}/games) && !defined(NO_GAMES)
742 _strfile=       games/fortune/strfile
743 .endif
744
745 bootstrap-tools:
746         ${LN} -fs /bin/date ${BTOOLSDEST}/bin/date
747 .for _tool in ${_strfile} \
748     usr.bin/patch \
749     bin/chmod bin/cp bin/cpdup bin/dd bin/mkdir bin/rm bin/echo bin/test \
750     bin/cat bin/ln bin/mv bin/csh bin/expr bin/sh \
751     bin/hostname bin/kill \
752     usr.bin/yacc usr.bin/colldef usr.bin/uudecode usr.bin/xinstall \
753     usr.bin/m4 usr.bin/rpcgen usr.bin/make usr.bin/awk usr.bin/stat \
754     usr.bin/find usr.bin/lex usr.bin/sed usr.bin/uname usr.bin/touch \
755     usr.bin/mkdep usr.bin/mktemp usr.bin/lorder usr.bin/file2c \
756     usr.bin/tsort usr.bin/tr usr.bin/join usr.bin/wc usr.bin/basename \
757     usr.bin/gencat usr.bin/chflags usr.bin/expand usr.bin/paste \
758     usr.bin/mklocale usr.bin/uuencode usr.bin/compile_et usr.bin/hexdump \
759     usr.bin/cap_mkdb usr.bin/true usr.bin/false \
760     usr.bin/cmp usr.bin/xargs usr.bin/id usr.bin/env usr.bin/dirname \
761     usr.bin/tail \
762     usr.sbin/chown usr.sbin/mtree usr.sbin/config \
763     usr.sbin/btxld usr.sbin/zic usr.sbin/makewhatis \
764     gnu/usr.bin/texinfo gnu/usr.bin/grep gnu/usr.bin/sort \
765     usr.bin/gzip usr.bin/bzip2 usr.bin/mkcsmapper usr.bin/mkesdb
766         ${ECHODIR} "===> ${_tool} (bootstrap-tools)"; \
767                 cd ${.CURDIR}/${_tool}; \
768                 ${MAKE} DIRPRFX=${_tool}/ obj; \
769                 ${MAKE} DIRPRFX=${_tool}/ depend; \
770                 ${MAKE} DIRPRFX=${_tool}/ all; \
771                 ${MAKE} DIRPRFX=${_tool}/ DESTDIR=${BTOOLSDEST} install
772 .endfor
773         touch ${BTOOLSDEST}/.bootstrap_done
774
775 # build-tools: Build special purpose build tools.
776 #
777 # XXX we may be able to remove or consolidate this into bootstrap-tools
778 # now that we have the native helper (.nx/.no) infrastructure.
779 #
780 .if exists(${.CURDIR}/share) && !defined(NO_SHARE)
781 _share= share/syscons/scrnmaps
782 .endif
783
784 _gcc41_cross= gnu/usr.bin/cc41
785 _gcc41_tools= gnu/usr.bin/cc41/cc_prep gnu/usr.bin/cc41/cc_tools
786 .if !defined(NO_GCC44)
787 _gcc44_cross= gnu/usr.bin/cc44
788 _gcc44_tools= gnu/usr.bin/cc44/cc_prep gnu/usr.bin/cc44/cc_tools
789 .endif
790 _custom_cross= libexec/customcc
791 _binutils= gnu/usr.bin/binutils217
792
793 build-tools:
794 .for _tool in ${_gcc41_tools} ${_gcc44_tools} ${_libkrb5} ${_share}
795         ${ECHODIR} "===> ${_tool} (build-tools)"; \
796                 cd ${.CURDIR}/${_tool}; \
797                 ${MAKE} DIRPRFX=${_tool}/ obj; \
798                 ${MAKE} DIRPRFX=${_tool}/ depend; \
799                 ${MAKE} DIRPRFX=${_tool}/ all; \
800                 ${MAKE} DIRPRFX=${_tool}/ DESTDIR=${BTOOLSDEST} install
801 .endfor
802         touch ${BTOOLSDEST}/.build_done
803
804 #
805 # cross-tools: Build cross-building tools
806 #
807 .if ${TARGET_ARCH} == "i386" && ${MACHINE_ARCH} != "i386"
808 _btxld= usr.sbin/btxld
809 .endif
810
811 cross-tools:
812 .for _tool in ${_btxld} ${_binutils} \
813               usr.bin/objformat \
814               ${_gcc41_cross} ${_gcc44_cross} ${_custom_cross}
815         ${ECHODIR} "===> ${_tool} (cross-tools)"; \
816                 cd ${.CURDIR}/${_tool}; \
817                 ${MAKE} DIRPRFX=${_tool}/ obj; \
818                 ${MAKE} DIRPRFX=${_tool}/ depend; \
819                 ${MAKE} DIRPRFX=${_tool}/ all; \
820                 ${MAKE} DIRPRFX=${_tool}/ DESTDIR=${CTOOLSDEST} install
821 .endfor
822         touch ${CTOOLSDEST}/.cross_done
823
824 #
825 # hierarchy - ensure that all the needed directories are present
826 #
827 hierarchy:
828         cd ${.CURDIR}/etc;              ${MAKE} distrib-dirs
829
830 #
831 # libraries - build all libraries, and install them under ${DESTDIR}.
832 #
833 # The list of libraries with dependents (${_prebuild_libs}) and their
834 # interdependencies (__L) are built automatically by the
835 # ${.CURDIR}/tools/make_libdeps.sh script.
836 #
837 # .makeenv does not work when bootstrapping from 4.x, so we must be sure
838 # to specify the correct CCVER or 'cc' will not exec the correct compiler.
839 #
840 libraries:
841         cd ${.CURDIR}; \
842             HOST_CCVER=${HOST_CCVER} CCVER=gcc41 \
843                 ${MAKE} -f Makefile.inc1 _startup_libs41;
844 .if !defined(NO_GCC44)
845         cd ${.CURDIR}; \
846             HOST_CCVER=${HOST_CCVER} CCVER=gcc44 \
847                 ${MAKE} -f Makefile.inc1 _startup_libs44;
848 .endif
849         cd ${.CURDIR}; \
850             ${MAKE} -f Makefile.inc1 _startup_libs; \
851             ${MAKE} -f Makefile.inc1 _prebuild_libs; \
852             ${MAKE} -f Makefile.inc1 _generic_libs;
853         touch ${WORLDDEST}/.libraries_done
854
855 # These dependencies are not automatically generated:
856 #
857 # gnu/lib/${CCVER}/libgcc and gnu/lib/${CCVER}/csu must be built before all
858 # shared libraries for ELF.  The target for _startup_libsXX is
859 # specifically built using gccXX.
860 #
861 _startup_libs41=        gnu/lib/gcc41/csu gnu/lib/gcc41/libgcc
862 _startup_libs44=        gnu/lib/gcc44/csu gnu/lib/gcc44/libgcc
863 _startup_libs=          lib/csu lib/libc lib/libc_rtld
864
865 _prebuild_libs=         lib/libbz2 lib/libz
866 _prebuild_libs+=        lib/libutil
867
868 _generic_libs=  gnu/lib
869
870 _prebuild_libs+= lib/libcom_err lib/libcrypt lib/libmd \
871                 lib/libncurses/libncurses lib/libopie lib/libradius \
872                 lib/libsbuf lib/libtacplus lib/libm \
873                 lib/libpam lib/libypclnt lib/lib${THREAD_LIB}
874
875 lib/libopie__L lib/libradius__L lib/libtacplus__L: lib/libmd__L
876
877 _generic_libs+= lib
878
879 .if !defined(NO_CRYPT)
880 .if !defined(NO_OPENSSL)
881 _prebuild_libs+=        secure/lib/libcrypto secure/lib/libssl
882 .if !defined(NO_OPENSSH)
883 _prebuild_libs+=        secure/lib/libssh
884 secure/lib/libssh__L: secure/lib/libcrypto__L lib/libz__L
885 .endif
886 .endif
887 _generic_libs+= secure/lib
888 .endif
889
890 _generic_libs+= usr.bin/lex/lib
891
892 .for _lib in ${_startup_libs41} ${_startup_libs44} \
893                 ${_startup_libs} ${_prebuild_libs} ${_generic_libs}
894 ${_lib}__L: .PHONY
895 .if exists(${.CURDIR}/${_lib})
896         ${ECHODIR} "===> ${_lib}"; \
897                 cd ${.CURDIR}/${_lib}; \
898                 ${MAKE} DIRPRFX=${_lib}/ depend; \
899                 ${MAKE} DIRPRFX=${_lib}/ all; \
900                 ${MAKE} DIRPRFX=${_lib}/ install
901 .endif
902 .endfor
903
904 _startup_libs: ${_startup_libs:S/$/__L/}
905 _startup_libs41: ${_startup_libs41:S/$/__L/}
906 _startup_libs44: ${_startup_libs44:S/$/__L/}
907 _prebuild_libs: ${_prebuild_libs:S/$/__L/}
908 _generic_libs: ${_generic_libs:S/$/__L/}
909
910 # library targets must be ordered because there are inter-library
911 # races (e.g. generation of tconfig.h)
912 #
913 .ORDER: ${_startup_libs41:S/$/__L/}
914 .ORDER: ${_startup_libs44:S/$/__L/}
915 .ORDER: ${_startup_libs:S/$/__L/}
916 .ORDER: ${_prebuild_libs:S/$/__L/}
917 .ORDER: ${_generic_libs:S/$/__L/}
918
919 .for __target in clean cleandepend cleandir obj depend includes
920 .for entry in ${SUBDIR}
921 ${entry}.${__target}__D: .PHONY
922         @if test -d ${.CURDIR}/${entry}.${MACHINE_ARCH}; then \
923                 ${ECHODIR} "===> ${DIRPRFX}${entry}.${MACHINE_ARCH}"; \
924                 edir=${entry}.${MACHINE_ARCH}; \
925                 cd ${.CURDIR}/$${edir}; \
926         else \
927                 ${ECHODIR} "===> ${DIRPRFX}${entry}"; \
928                 edir=${entry}; \
929                 cd ${.CURDIR}/$${edir}; \
930         fi; \
931         ${MAKE} ${__target} DIRPRFX=${DIRPRFX}$${edir}/
932 .endfor
933 par-${__target}: ${SUBDIR:S/$/.${__target}__D/}
934 .ORDER: ${SUBDIR:S/$/.${__target}__D/}
935 .endfor
936 .ORDER: par-clean par-cleandepend par-cleandir par-obj par-depend par-includes
937
938 # The wmake target is used by /usr/bin/wmake to run make in a
939 # world build environment.
940 #
941 wmake:
942         @echo '${WMAKEENV} ${MAKE} -m ${.CURDIR}/share/mk ${WMAKE_ARGS}'
943
944 wmakeenv:
945         @echo '${WMAKEENV} /bin/sh'
946
947 bmake:
948         @echo '${BMAKEENV} ${MAKE} -m ${.CURDIR}/share/mk ${BMAKE_ARGS}'
949
950 bmakeenv:
951         @echo '${BMAKEENV} /bin/sh'
952
953 tmake:
954         @echo '${TMAKEENV} ${MAKE} -m ${.CURDIR}/share/mk ${TMAKE_ARGS}'
955
956 tmakeenv:
957         @echo '${TMAKEENV} /bin/sh'
958
959 xmake:
960         @echo '${XMAKEENV} ${MAKE} -m ${.CURDIR}/share/mk ${XMAKE_ARGS}'
961
962 xmakeenv:
963         @echo '${XMAKEENV} /bin/sh'
964
965 .include <bsd.subdir.mk>
966