2 * Copyright (c) 1997,1998 Maxim Bolotin and Oleg Sharoiko.
5 * Redistribution and use in source and binary forms, with or without
6 * modification, are permitted provided that the following conditions
8 * 1. Redistributions of source code must retain the above copyright
9 * notice unmodified, this list of conditions, and the following
11 * 2. Redistributions in binary form must reproduce the above copyright
12 * notice, this list of conditions and the following disclaimer in the
13 * documentation and/or other materials provided with the distribution.
15 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
16 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
17 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
18 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
19 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
20 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
21 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
22 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
23 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
24 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
30 * $FreeBSD: src/sys/dev/cs/if_cs.c,v 1.19.2.1 2001/01/25 20:13:48 imp Exp $
31 * $DragonFly: src/sys/dev/netif/cs/if_cs.c,v 1.2 2003/06/17 04:28:23 dillon Exp $
33 * Device driver for Crystal Semiconductor CS8920 based ethernet
34 * adapters. By Maxim Bolotin and Oleg Sharoiko, 27-April-1997
41 #include <sys/param.h>
42 #include <sys/systm.h>
43 #include <sys/malloc.h>
45 #include <sys/socket.h>
46 #include <sys/sockio.h>
47 #include <sys/kernel.h>
48 #include <sys/sysctl.h>
49 #include <sys/syslog.h>
51 #include <sys/module.h>
53 #include <machine/bus.h>
55 #include <machine/resource.h>
56 #include <machine/clock.h>
59 #include <net/if_arp.h>
60 #include <net/if_media.h>
61 #include <net/ethernet.h>
64 #include <dev/cs/if_csreg.h>
65 #include <dev/cs/if_csvar.h>
68 #define CS_DMA_BUFFER_SIZE 65536
70 #define CS_DMA_BUFFER_SIZE 16384
73 static int cs_recv_delay = 570;
74 SYSCTL_INT(_machdep, OID_AUTO, cs_recv_delay, CTLFLAG_RW, &cs_recv_delay, 0, "");
76 static void cs_init (void *);
77 static int cs_ioctl (struct ifnet *, u_long, caddr_t);
78 static void cs_start (struct ifnet *);
79 static void cs_stop (struct cs_softc *);
80 static void cs_reset (struct cs_softc *);
81 static void cs_watchdog (struct ifnet *);
83 static int cs_mediachange (struct ifnet *);
84 static void cs_mediastatus (struct ifnet *, struct ifmediareq *);
85 static int cs_mediaset (struct cs_softc *, int);
87 static void cs_write_mbufs(struct cs_softc*, struct mbuf*);
88 static void cs_xmit_buf(struct cs_softc*);
89 static int cs_get_packet(struct cs_softc*);
90 static void cs_setmode(struct cs_softc*);
92 static int get_eeprom_data(struct cs_softc *sc, int, int, int *);
93 static int get_eeprom_cksum(int, int, int *);
94 static int wait_eeprom_ready( struct cs_softc *);
95 static void control_dc_dc( struct cs_softc *, int );
96 static int send_test_pkt( struct cs_softc * );
97 static int enable_tp(struct cs_softc *);
98 static int enable_aui(struct cs_softc *);
99 static int enable_bnc(struct cs_softc *);
100 static int cs_duplex_auto(struct cs_softc *);
102 devclass_t cs_devclass;
105 get_eeprom_data( struct cs_softc *sc, int off, int len, int *buffer)
110 printf(CS_NAME":EEPROM data from %x for %x:\n", off,len);
113 for (i=0;i<len;i++) {
114 if (wait_eeprom_ready(sc) < 0) return -1;
115 /* Send command to EEPROM to read */
116 cs_writereg(sc->nic_addr, PP_EECMD, (off+i)|EEPROM_READ_CMD );
117 if (wait_eeprom_ready(sc)<0)
119 buffer[i] = cs_readreg (sc->nic_addr, PP_EEData);
122 printf("%02x %02x ",(unsigned char)buffer[i],
123 (unsigned char)buffer[i+1]);
135 get_eeprom_cksum(int off, int len, int *buffer)
148 wait_eeprom_ready(struct cs_softc *sc)
150 DELAY ( 30000 ); /* XXX should we do some checks here ? */
155 control_dc_dc(struct cs_softc *sc, int on_not_off)
157 unsigned int self_control = HCB1_ENBL;
159 if (((sc->adapter_cnf & A_CNF_DC_DC_POLARITY)!=0) ^ on_not_off)
160 self_control |= HCB1;
162 self_control &= ~HCB1;
163 cs_writereg( sc->nic_addr, PP_SelfCTL, self_control );
170 cs_duplex_auto(struct cs_softc *sc)
172 int i, error=0, unit=sc->arpcom.ac_if.if_unit;
174 cs_writereg(sc->nic_addr, PP_AutoNegCTL,
175 RE_NEG_NOW | ALLOW_FDX | AUTO_NEG_ENABLE );
176 for (i=0; cs_readreg(sc->nic_addr,PP_AutoNegST)&AUTO_NEG_BUSY; i++) {
178 printf(CS_NAME"%1d: full/half duplex "
179 "auto negotiation timeout\n", unit);
190 enable_tp(struct cs_softc *sc)
192 int unit = sc->arpcom.ac_if.if_unit;
194 cs_writereg(sc->nic_addr, PP_LineCTL, sc->line_ctl & ~AUI_ONLY);
195 control_dc_dc(sc, 0);
198 if ((cs_readreg(sc->nic_addr, PP_LineST) & LINK_OK)==0) {
199 printf(CS_NAME"%1d: failed to enable TP\n", unit);
207 * XXX This was rewritten from Linux driver without any tests.
210 send_test_pkt(struct cs_softc *sc)
212 char test_packet[] = { 0,0,0,0,0,0, 0,0,0,0,0,0,
213 0, 46, /* A 46 in network order */
214 0, 0, /* DSAP=0 & SSAP=0 fields */
215 0xf3, 0 /* Control (Test Req + P bit set) */ };
217 u_char ether_address_backup[ETHER_ADDR_LEN];
219 for (i = 0; i < ETHER_ADDR_LEN; i++) {
220 ether_address_backup[i] = sc->arpcom.ac_enaddr[i];
223 cs_writereg(sc->nic_addr, PP_LineCTL,
224 cs_readreg(sc->nic_addr, PP_LineCTL) | SERIAL_TX_ON );
226 sc->arpcom.ac_enaddr, ETHER_ADDR_LEN);
227 bcopy(test_packet+ETHER_ADDR_LEN,
228 sc->arpcom.ac_enaddr, ETHER_ADDR_LEN);
229 outw(sc->nic_addr + TX_CMD_PORT, sc->send_cmd);
230 outw(sc->nic_addr + TX_LEN_PORT, sizeof(test_packet));
232 /* Wait for chip to allocate memory */
234 if (!(cs_readreg(sc->nic_addr, PP_BusST) & READY_FOR_TX_NOW)) {
235 for (i = 0; i < ETHER_ADDR_LEN; i++) {
236 sc->arpcom.ac_enaddr[i] = ether_address_backup[i];
241 outsw(sc->nic_addr + TX_FRAME_PORT, test_packet, sizeof(test_packet));
245 if ((cs_readreg(sc->nic_addr,PP_TxEvent) & TX_SEND_OK_BITS) == TX_OK) {
246 for (i = 0; i < ETHER_ADDR_LEN; i++) {
247 sc->arpcom.ac_enaddr[i] = ether_address_backup[i];
251 for (i = 0; i < ETHER_ADDR_LEN; i++) {
252 sc->arpcom.ac_enaddr[i] = ether_address_backup[i];
258 * XXX This was rewritten from Linux driver without any tests.
261 enable_aui(struct cs_softc *sc)
263 int unit = sc->arpcom.ac_if.if_unit;
265 control_dc_dc(sc, 0);
266 cs_writereg(sc->nic_addr, PP_LineCTL,
267 (sc->line_ctl & ~AUTO_AUI_10BASET) | AUI_ONLY);
269 if (!send_test_pkt(sc)) {
270 printf(CS_NAME"%1d failed to enable AUI\n", unit);
277 * XXX This was rewritten from Linux driver without any tests.
280 enable_bnc(struct cs_softc *sc)
282 int unit = sc->arpcom.ac_if.if_unit;
284 control_dc_dc(sc, 1);
285 cs_writereg(sc->nic_addr, PP_LineCTL,
286 (sc->line_ctl & ~AUTO_AUI_10BASET) | AUI_ONLY);
288 if (!send_test_pkt(sc)) {
289 printf(CS_NAME"%1d failed to enable BNC\n", unit);
296 cs_cs89x0_probe(device_t dev)
304 struct cs_softc *sc = device_get_softc(dev);
306 unsigned rev_type = 0;
308 int eeprom_buff[CHKSUM_LEN];
309 int chip_type, pp_isaint, pp_isadma;
311 error = cs_alloc_port(dev, 0, CS_89x0_IO_PORTS);
315 iobase=rman_get_start(sc->port_res);
317 if ((inw(iobase+ADD_PORT) & ADD_MASK) != ADD_SIG) {
318 /* Chip not detected. Let's try to reset it */
320 device_printf(dev, "trying to reset the chip.\n");
321 outw(iobase+ADD_PORT, PP_SelfCTL);
322 i = inw(iobase+DATA_PORT);
323 outw(iobase+ADD_PORT, PP_SelfCTL);
324 outw(iobase+DATA_PORT, i | POWER_ON_RESET);
325 if ((inw(iobase+ADD_PORT) & ADD_MASK) != ADD_SIG)
329 outw(iobase+ADD_PORT, PP_ChipID);
330 if (inw(iobase+DATA_PORT) != CHIP_EISA_ID_SIG)
333 rev_type = cs_readreg(iobase, PRODUCT_ID_ADD);
334 chip_type = rev_type & ~REVISON_BITS;
335 chip_revision = ((rev_type & REVISON_BITS) >> 8) + 'A';
337 sc->nic_addr = iobase;
338 sc->chip_type = chip_type;
340 if(chip_type==CS8900) {
341 pp_isaint = PP_CS8900_ISAINT;
342 pp_isadma = PP_CS8900_ISADMA;
343 sc->send_cmd = TX_CS8900_AFTER_ALL;
345 pp_isaint = PP_CS8920_ISAINT;
346 pp_isadma = PP_CS8920_ISADMA;
347 sc->send_cmd = TX_CS8920_AFTER_ALL;
351 * Clear some fields so that fail of EEPROM will left them clean
353 sc->auto_neg_cnf = 0;
358 * If no interrupt specified (or "?"), use what the board tells us.
360 error = bus_get_resource(dev, SYS_RES_IRQ, 0, &irq, &junk);
363 * Get data from EEPROM
365 if((cs_readreg(iobase, PP_SelfST) & EEPROM_PRESENT) == 0) {
366 device_printf(dev, "No EEPROM, assuming defaults.\n");
368 if (get_eeprom_data(sc,START_EEPROM_DATA,CHKSUM_LEN, eeprom_buff)<0) {
369 device_printf(dev, "EEPROM read failed, "
370 "assuming defaults.\n");
372 if (get_eeprom_cksum(START_EEPROM_DATA,CHKSUM_LEN, eeprom_buff)<0) {
373 device_printf(dev, "EEPROM cheksum bad, "
374 "assuming defaults.\n");
377 eeprom_buff[AUTO_NEG_CNF_OFFSET/2];
379 eeprom_buff[ADAPTER_CNF_OFFSET/2];
381 eeprom_buff[ISA_CNF_OFFSET/2];
383 for (i=0; i<ETHER_ADDR_LEN/2; i++) {
384 sc->arpcom.ac_enaddr[i*2]=
386 sc->arpcom.ac_enaddr[i*2+1]=
391 * If no interrupt specified (or "?"),
392 * use what the board tells us.
395 irq = sc->isa_config & INT_NO_MASK;
396 if (chip_type==CS8900) {
415 device_printf(dev, "invalid irq in EEPROM.\n");
419 if (irq>CS8920_NO_INTS) {
420 device_printf(dev, "invalid irq in EEPROM.\n");
428 bus_set_resource(dev, SYS_RES_IRQ, 0,
436 if (chip_type == CS8900) {
454 if (irq > CS8920_NO_INTS) {
461 cs_writereg(iobase, pp_isaint, irq);
463 device_printf(dev, "Unknown or invalid irq\n");
471 cs_writereg(iobase, pp_isadma, drq);
473 printf( CS_NAME"%1d: incorrect drq\n", unit );
479 device_printf(dev, "CS89%c0%s rev %c media%s%s%s\n",
480 chip_type==CS8900 ? '0' : '2',
481 chip_type==CS8920M ? "M" : "",
483 (sc->adapter_cnf & A_CNF_10B_T) ? " TP" : "",
484 (sc->adapter_cnf & A_CNF_AUI) ? " AUI" : "",
485 (sc->adapter_cnf & A_CNF_10B_2) ? " BNC" : "");
487 if ((sc->adapter_cnf & A_CNF_EXTND_10B_2) &&
488 (sc->adapter_cnf & A_CNF_LOW_RX_SQUELCH))
489 sc->line_ctl = LOW_RX_SQUELCH;
498 * Allocate a port resource with the given resource id.
500 int cs_alloc_port(device_t dev, int rid, int size)
502 struct cs_softc *sc = device_get_softc(dev);
503 struct resource *res;
505 res = bus_alloc_resource(dev, SYS_RES_IOPORT, &rid,
506 0ul, ~0ul, size, RF_ACTIVE);
510 sc->port_used = size;
518 * Allocate a memory resource with the given resource id.
520 int cs_alloc_memory(device_t dev, int rid, int size)
522 struct cs_softc *sc = device_get_softc(dev);
523 struct resource *res;
525 res = bus_alloc_resource(dev, SYS_RES_MEMORY, &rid,
526 0ul, ~0ul, size, RF_ACTIVE);
538 * Allocate an irq resource with the given resource id.
540 int cs_alloc_irq(device_t dev, int rid, int flags)
542 struct cs_softc *sc = device_get_softc(dev);
543 struct resource *res;
545 res = bus_alloc_resource(dev, SYS_RES_IRQ, &rid,
546 0ul, ~0ul, 1, (RF_ACTIVE | flags));
557 * Release all resources
559 void cs_release_resources(device_t dev)
561 struct cs_softc *sc = device_get_softc(dev);
564 bus_release_resource(dev, SYS_RES_IOPORT,
565 sc->port_rid, sc->port_res);
569 bus_release_resource(dev, SYS_RES_MEMORY,
570 sc->mem_rid, sc->mem_res);
574 bus_release_resource(dev, SYS_RES_IRQ,
575 sc->irq_rid, sc->irq_res);
581 * Install the interface into kernel networking data structures
584 cs_attach(struct cs_softc *sc, int unit, int flags)
587 struct ifnet *ifp = &(sc->arpcom.ac_if);
595 ifp->if_output=ether_output;
596 ifp->if_start=cs_start;
597 ifp->if_ioctl=cs_ioctl;
598 ifp->if_watchdog=cs_watchdog;
599 ifp->if_init=cs_init;
600 ifp->if_snd.ifq_maxlen= IFQ_MAXLEN;
605 ifp->if_linkmib=&sc->mibdata;
606 ifp->if_linkmiblen=sizeof sc->mibdata;
609 ifp->if_flags=(IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST );
612 * this code still in progress (DMA support)
615 sc->recv_ring=malloc(CS_DMA_BUFFER_SIZE<<1, M_DEVBUF, M_NOWAIT);
616 if (sc->recv_ring == NULL) {
618 "%d: Couldn't allocate memory for NIC\n", unit);
621 if ((sc->recv_ring-(sc->recv_ring & 0x1FFFF))
622 < (128*1024-CS_DMA_BUFFER_SIZE))
623 sc->recv_ring+=16*1024;
627 sc->buffer=malloc(ETHER_MAX_LEN-ETHER_CRC_LEN,M_DEVBUF,M_NOWAIT);
628 if (sc->buffer == NULL) {
629 printf(CS_NAME"%d: Couldn't allocate memory for NIC\n",
635 * Initialize the media structures.
637 ifmedia_init(&sc->media, 0, cs_mediachange, cs_mediastatus);
639 if (sc->adapter_cnf & A_CNF_10B_T) {
640 ifmedia_add(&sc->media, IFM_ETHER|IFM_10_T, 0, NULL);
641 if (sc->chip_type != CS8900) {
642 ifmedia_add(&sc->media,
643 IFM_ETHER|IFM_10_T|IFM_FDX, 0, NULL);
644 ifmedia_add(&sc->media,
645 IFM_ETHER|IFM_10_T|IFM_HDX, 0, NULL);
649 if (sc->adapter_cnf & A_CNF_10B_2)
650 ifmedia_add(&sc->media, IFM_ETHER|IFM_10_2, 0, NULL);
652 if (sc->adapter_cnf & A_CNF_AUI)
653 ifmedia_add(&sc->media, IFM_ETHER|IFM_10_5, 0, NULL);
655 if (sc->adapter_cnf & A_CNF_MEDIA)
656 ifmedia_add(&sc->media, IFM_ETHER|IFM_AUTO, 0, NULL);
658 /* Set default media from EEPROM */
659 switch (sc->adapter_cnf & A_CNF_MEDIA_TYPE) {
660 case A_CNF_MEDIA_AUTO: media = IFM_ETHER|IFM_AUTO; break;
661 case A_CNF_MEDIA_10B_T: media = IFM_ETHER|IFM_10_T; break;
662 case A_CNF_MEDIA_10B_2: media = IFM_ETHER|IFM_10_2; break;
663 case A_CNF_MEDIA_AUI: media = IFM_ETHER|IFM_10_5; break;
664 default: printf(CS_NAME"%d: adapter has no media\n", unit);
666 ifmedia_set(&sc->media, media);
667 cs_mediaset(sc, media);
669 ether_ifattach(ifp, ETHER_BPF_SUPPORTED);
673 printf(CS_NAME"%d: ethernet address %6D\n",
674 ifp->if_unit, sc->arpcom.ac_enaddr, ":");
680 * Initialize the board
685 struct cs_softc *sc=(struct cs_softc *)xsc;
686 struct ifnet *ifp = &sc->arpcom.ac_if;
689 /* address not known */
690 if (TAILQ_EMPTY(&ifp->if_addrhead)) /* unlikely? XXX */
694 * reset whatchdog timer
702 * Hardware initialization of cs
705 /* Enable receiver and transmitter */
706 cs_writereg(sc->nic_addr, PP_LineCTL,
707 cs_readreg( sc->nic_addr, PP_LineCTL ) |
708 SERIAL_RX_ON | SERIAL_TX_ON);
710 /* Configure the receiver mode */
714 * This defines what type of frames will cause interrupts
715 * Bad frames should generate interrupts so that the driver
716 * could track statistics of discarded packets
718 rx_cfg = RX_OK_ENBL | RX_CRC_ERROR_ENBL | RX_RUNT_ENBL |
720 if (sc->isa_config & STREAM_TRANSFER)
721 rx_cfg |= RX_STREAM_ENBL;
722 cs_writereg(sc->nic_addr, PP_RxCFG, rx_cfg);
724 cs_writereg(sc->nic_addr, PP_TxCFG, TX_LOST_CRS_ENBL |
725 TX_SQE_ERROR_ENBL | TX_OK_ENBL | TX_LATE_COL_ENBL |
726 TX_JBR_ENBL | TX_ANY_COL_ENBL | TX_16_COL_ENBL);
728 cs_writereg(sc->nic_addr, PP_BufCFG, READY_FOR_TX_ENBL |
729 RX_MISS_COUNT_OVRFLOW_ENBL | TX_COL_COUNT_OVRFLOW_ENBL |
730 TX_UNDERRUN_ENBL /*| RX_DMA_ENBL*/);
732 /* Write MAC address into IA filter */
733 for (i=0; i<ETHER_ADDR_LEN/2; i++)
734 cs_writereg(sc->nic_addr, PP_IA+i*2,
735 sc->arpcom.ac_enaddr[i*2] |
736 (sc->arpcom.ac_enaddr[i*2+1] << 8) );
739 * Now enable everything
742 #ifdef CS_USE_64K_DMA
743 cs_writereg(sc->nic_addr, PP_BusCTL, ENABLE_IRQ | RX_DMA_SIZE_64K);
746 cs_writereg(sc->nic_addr, PP_BusCTL, ENABLE_IRQ);
749 cs_writereg(sc->nic_addr, PP_BusCTL, ENABLE_IRQ);
752 * Set running and clear output active flags
754 sc->arpcom.ac_if.if_flags |= IFF_RUNNING;
755 sc->arpcom.ac_if.if_flags &= ~IFF_OACTIVE;
758 * Start sending process
766 * Get the packet from the board and send it to the upper layer
770 cs_get_packet(struct cs_softc *sc)
772 struct ifnet *ifp = &(sc->arpcom.ac_if);
773 int iobase = sc->nic_addr, status, length;
774 struct ether_header *eh;
781 status = inw(iobase + RX_FRAME_PORT);
782 length = inw(iobase + RX_FRAME_PORT);
785 printf(CS_NAME"%1d: rcvd: stat %x, len %d\n",
786 ifp->if_unit, status, length);
789 if (!(status & RX_OK)) {
791 printf(CS_NAME"%1d: bad pkt stat %x\n", ifp->if_unit, status);
797 MGETHDR(m, M_DONTWAIT, MT_DATA);
801 if (length > MHLEN) {
802 MCLGET(m, M_DONTWAIT);
803 if (!(m->m_flags & M_EXT)) {
809 /* Initialize packet's header info */
810 m->m_pkthdr.rcvif = ifp;
811 m->m_pkthdr.len = length;
815 insw(iobase + RX_FRAME_PORT, m->m_data, (length+1)>>1);
817 eh = mtod(m, struct ether_header *);
820 for (i=0;i<length;i++)
821 printf(" %02x",(unsigned char)*((char *)(m->m_data+i)));
825 if (status & (RX_IA | RX_BROADCAST) ||
826 (ifp->if_flags & IFF_MULTICAST && status & RX_HASHED)) {
827 m->m_pkthdr.len -= sizeof(struct ether_header);
828 m->m_len -= sizeof(struct ether_header);
829 m->m_data += sizeof(struct ether_header);
831 /* Feed the packet to the upper layer */
832 ether_input(ifp, eh, m);
836 if (length==ETHER_MAX_LEN-ETHER_CRC_LEN)
837 DELAY( cs_recv_delay );
851 struct cs_softc *sc = (struct cs_softc*) arg;
852 struct ifnet *ifp = &(sc->arpcom.ac_if);
856 int unit = ifp->if_unit;
857 printf(CS_NAME"%1d: Interrupt.\n", unit);
860 while ((status=cs_readword(sc->nic_addr, ISQ_PORT))) {
863 printf( CS_NAME"%1d:from ISQ: %04x\n", unit, status );
866 switch (status & ISQ_EVENT_MASK) {
867 case ISQ_RECEIVER_EVENT:
871 case ISQ_TRANSMITTER_EVENT:
876 ifp->if_flags &= ~IFF_OACTIVE;
880 case ISQ_BUFFER_EVENT:
881 if (status & READY_FOR_TX) {
882 ifp->if_flags &= ~IFF_OACTIVE;
886 if (status & TX_UNDERRUN) {
887 ifp->if_flags &= ~IFF_OACTIVE;
893 case ISQ_RX_MISS_EVENT:
894 ifp->if_ierrors+=(status>>6);
897 case ISQ_TX_COL_EVENT:
898 ifp->if_collisions+=(status>>6);
903 if (!(ifp->if_flags & IFF_OACTIVE)) {
909 * Save the data in buffer
913 cs_write_mbufs( struct cs_softc *sc, struct mbuf *m )
917 unsigned char *data, *buf;
919 for (mp=m, buf=sc->buffer, sc->buf_len=0; mp != NULL; mp=mp->m_next) {
929 * Find actual data address
931 data = mtod(mp, caddr_t);
933 bcopy((caddr_t) data, (caddr_t) buf, len);
941 cs_xmit_buf( struct cs_softc *sc )
943 outsw(sc->nic_addr+TX_FRAME_PORT, sc->buffer, (sc->buf_len+1)>>1);
948 cs_start(struct ifnet *ifp)
952 struct cs_softc *sc = ifp->if_softc;
958 length = sc->buf_len;
960 IF_DEQUEUE( &ifp->if_snd, m );
967 for (length=0, mp=m; mp != NULL; mp=mp->m_next)
970 /* Skip zero-length packets */
976 cs_write_mbufs(sc, m);
986 * Issue a SEND command
988 outw(sc->nic_addr+TX_CMD_PORT, sc->send_cmd);
989 outw(sc->nic_addr+TX_LEN_PORT, length );
992 * If there's no free space in the buffer then leave
993 * this packet for the next time: indicate output active
996 if (!(cs_readreg(sc->nic_addr, PP_BusST) & READY_FOR_TX_NOW)) {
997 ifp->if_timer = sc->buf_len;
999 ifp->if_flags |= IFF_OACTIVE;
1006 * Set the watchdog timer in case we never hear
1007 * from board again. (I don't know about correct
1008 * value for this timeout)
1010 ifp->if_timer = length;
1013 ifp->if_flags |= IFF_OACTIVE;
1019 * Stop everything on the interface
1022 cs_stop(struct cs_softc *sc)
1026 cs_writereg(sc->nic_addr, PP_RxCFG, 0);
1027 cs_writereg(sc->nic_addr, PP_TxCFG, 0);
1028 cs_writereg(sc->nic_addr, PP_BufCFG, 0);
1029 cs_writereg(sc->nic_addr, PP_BusCTL, 0);
1031 sc->arpcom.ac_if.if_flags &= ~(IFF_RUNNING | IFF_OACTIVE);
1032 sc->arpcom.ac_if.if_timer = 0;
1038 * Reset the interface
1041 cs_reset(struct cs_softc *sc)
1048 cs_setmode(struct cs_softc *sc)
1050 struct ifnet *ifp = &(sc->arpcom.ac_if);
1053 /* Stop the receiver while changing filters */
1054 cs_writereg(sc->nic_addr, PP_LineCTL,
1055 cs_readreg(sc->nic_addr, PP_LineCTL) & ~SERIAL_RX_ON);
1057 if (ifp->if_flags & IFF_PROMISC) {
1058 /* Turn on promiscuous mode. */
1059 rx_ctl = RX_OK_ACCEPT | RX_PROM_ACCEPT;
1061 if (ifp->if_flags & IFF_MULTICAST) {
1062 /* Allow receiving frames with multicast addresses */
1063 rx_ctl = RX_IA_ACCEPT | RX_BROADCAST_ACCEPT |
1064 RX_OK_ACCEPT | RX_MULTCAST_ACCEPT;
1066 * Here the reconfiguration of chip's multicast
1067 * filters should be done but I've no idea about
1068 * hash transformation in this chip. If you can
1069 * add this code or describe me the transformation
1074 * Receive only good frames addressed for us and
1077 rx_ctl = RX_IA_ACCEPT | RX_BROADCAST_ACCEPT |
1082 /* Set up the filter */
1083 cs_writereg(sc->nic_addr, PP_RxCTL, RX_DEF_ACCEPT | rx_ctl);
1085 /* Turn on receiver */
1086 cs_writereg(sc->nic_addr, PP_LineCTL,
1087 cs_readreg(sc->nic_addr, PP_LineCTL) | SERIAL_RX_ON);
1091 cs_ioctl(register struct ifnet *ifp, u_long command, caddr_t data)
1093 struct cs_softc *sc=ifp->if_softc;
1094 struct ifreq *ifr = (struct ifreq *)data;
1098 printf(CS_NAME"%d: ioctl(%lx)\n",sc->arpcom.ac_if.if_unit,command);
1107 ether_ioctl(ifp, command, data);
1112 * Switch interface state between "running" and
1113 * "stopped", reflecting the UP flag.
1115 if (sc->arpcom.ac_if.if_flags & IFF_UP) {
1116 if ((sc->arpcom.ac_if.if_flags & IFF_RUNNING)==0) {
1120 if ((sc->arpcom.ac_if.if_flags & IFF_RUNNING)!=0) {
1125 * Promiscuous and/or multicast flags may have changed,
1126 * so reprogram the multicast filter and/or receive mode.
1128 * See note about multicasts in cs_setmode
1136 * Multicast list has changed; set the hardware filter
1139 * See note about multicasts in cs_setmode
1147 error = ifmedia_ioctl(ifp, ifr, &sc->media, command);
1159 * Device timeout/watchdog routine. Entered if the device neglects to
1160 * generate an interrupt after a transmit has been started on it.
1163 cs_watchdog(struct ifnet *ifp)
1165 struct cs_softc *sc = ifp->if_softc;
1168 log(LOG_ERR, CS_NAME"%d: device timeout\n", ifp->if_unit);
1170 /* Reset the interface */
1171 if (ifp->if_flags & IFF_UP)
1178 cs_mediachange(struct ifnet *ifp)
1180 struct cs_softc *sc = ifp->if_softc;
1181 struct ifmedia *ifm = &sc->media;
1183 if (IFM_TYPE(ifm->ifm_media) != IFM_ETHER)
1186 return cs_mediaset(sc, ifm->ifm_media);
1190 cs_mediastatus(struct ifnet *ifp, struct ifmediareq *ifmr)
1193 struct cs_softc *sc = ifp->if_softc;
1195 ifmr->ifm_active = IFM_ETHER;
1196 line_status = cs_readreg(sc->nic_addr, PP_LineST);
1197 if (line_status & TENBASET_ON) {
1198 ifmr->ifm_active |= IFM_10_T;
1199 if (sc->chip_type != CS8900) {
1200 if (cs_readreg(sc->nic_addr, PP_AutoNegST) & FDX_ACTIVE)
1201 ifmr->ifm_active |= IFM_FDX;
1202 if (cs_readreg(sc->nic_addr, PP_AutoNegST) & HDX_ACTIVE)
1203 ifmr->ifm_active |= IFM_HDX;
1205 ifmr->ifm_status = IFM_AVALID;
1206 if (line_status & LINK_OK)
1207 ifmr->ifm_status |= IFM_ACTIVE;
1209 if (line_status & AUI_ON) {
1210 cs_writereg(sc->nic_addr, PP_SelfCTL,
1211 cs_readreg(sc->nic_addr, PP_SelfCTL) |
1213 if (((sc->adapter_cnf & A_CNF_DC_DC_POLARITY)!=0)^
1214 (cs_readreg(sc->nic_addr, PP_SelfCTL)&HCB1))
1215 ifmr->ifm_active |= IFM_10_2;
1217 ifmr->ifm_active |= IFM_10_5;
1223 cs_mediaset(struct cs_softc *sc, int media)
1227 /* Stop the receiver & transmitter */
1228 cs_writereg(sc->nic_addr, PP_LineCTL,
1229 cs_readreg(sc->nic_addr, PP_LineCTL) &
1230 ~(SERIAL_RX_ON | SERIAL_TX_ON));
1233 printf(CS_NAME"%d: cs_setmedia(%x)\n",sc->arpcom.ac_if.if_unit,media);
1236 switch (IFM_SUBTYPE(media)) {
1239 if ((error=enable_tp(sc))==0)
1240 error = cs_duplex_auto(sc);
1241 else if ((error=enable_bnc(sc)) != 0)
1242 error = enable_aui(sc);
1245 if ((error=enable_tp(sc)) != 0)
1247 if (media & IFM_FDX)
1249 else if (media & IFM_HDX)
1252 error = cs_duplex_auto(sc);
1255 error = enable_bnc(sc);
1258 error = enable_aui(sc);
1263 * Turn the transmitter & receiver back on
1265 cs_writereg(sc->nic_addr, PP_LineCTL,
1266 cs_readreg( sc->nic_addr, PP_LineCTL ) |
1267 SERIAL_RX_ON | SERIAL_TX_ON);