kernel: Fix the build of the SOEKRIS kernel config.
[dragonfly.git] / sys / netproto / 802_11 / wlan / ieee80211_ht.c
1 /*-
2  * Copyright (c) 2007-2008 Sam Leffler, Errno Consulting
3  * All rights reserved.
4  *
5  * Redistribution and use in source and binary forms, with or without
6  * modification, are permitted provided that the following conditions
7  * are met:
8  * 1. Redistributions of source code must retain the above copyright
9  *    notice, this list of conditions and the following disclaimer.
10  * 2. Redistributions in binary form must reproduce the above copyright
11  *    notice, this list of conditions and the following disclaimer in the
12  *    documentation and/or other materials provided with the distribution.
13  *
14  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
15  * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
16  * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
17  * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
18  * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
19  * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
20  * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
21  * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
22  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
23  * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
24  *
25  * $FreeBSD: head/sys/net80211/ieee80211_ht.c 195377 2009-07-05 17:59:19Z sam $
26  */
27
28 /*
29  * IEEE 802.11n protocol support.
30  */
31
32 #include "opt_inet.h"
33 #include "opt_wlan.h"
34
35 #include <sys/param.h>
36 #include <sys/kernel.h>
37 #include <sys/systm.h> 
38 #include <sys/endian.h>
39  
40 #include <sys/socket.h>
41
42 #include <net/if.h>
43 #include <net/if_media.h>
44 #include <net/ethernet.h>
45 #include <net/route.h>
46
47 #include <netproto/802_11/ieee80211_var.h>
48 #include <netproto/802_11/ieee80211_action.h>
49 #include <netproto/802_11/ieee80211_input.h>
50
51 /* define here, used throughout file */
52 #define MS(_v, _f)      (((_v) & _f) >> _f##_S)
53 #define SM(_v, _f)      (((_v) << _f##_S) & _f)
54
55 const struct ieee80211_mcs_rates ieee80211_htrates[16] = {
56         {  13,  14,  27,  30 }, /* MCS 0 */
57         {  26,  29,  54,  60 }, /* MCS 1 */
58         {  39,  43,  81,  90 }, /* MCS 2 */
59         {  52,  58, 108, 120 }, /* MCS 3 */
60         {  78,  87, 162, 180 }, /* MCS 4 */
61         { 104, 116, 216, 240 }, /* MCS 5 */
62         { 117, 130, 243, 270 }, /* MCS 6 */
63         { 130, 144, 270, 300 }, /* MCS 7 */
64         {  26,  29,  54,  60 }, /* MCS 8 */
65         {  52,  58, 108, 120 }, /* MCS 9 */
66         {  78,  87, 162, 180 }, /* MCS 10 */
67         { 104, 116, 216, 240 }, /* MCS 11 */
68         { 156, 173, 324, 360 }, /* MCS 12 */
69         { 208, 231, 432, 480 }, /* MCS 13 */
70         { 234, 260, 486, 540 }, /* MCS 14 */
71         { 260, 289, 540, 600 }  /* MCS 15 */
72 };
73
74 static const struct ieee80211_htrateset ieee80211_rateset_11n =
75         { 16, {
76                   0,   1,   2,   3,   4,  5,   6,  7,  8,  9,
77                  10,  11,  12,  13,  14,  15 }
78         };
79
80 #ifdef IEEE80211_AMPDU_AGE
81 static  int ieee80211_ampdu_age = -1;   /* threshold for ampdu reorder q (ms) */
82 SYSCTL_PROC(_net_wlan, OID_AUTO, ampdu_age, CTLTYPE_INT | CTLFLAG_RW,
83         &ieee80211_ampdu_age, 0, ieee80211_sysctl_msecs_ticks, "I",
84         "AMPDU max reorder age (ms)");
85 #endif
86
87 static  int ieee80211_recv_bar_ena = 1;
88 SYSCTL_INT(_net_wlan, OID_AUTO, recv_bar, CTLFLAG_RW, &ieee80211_recv_bar_ena,
89             0, "BAR frame processing (ena/dis)");
90
91 static  int ieee80211_addba_timeout = -1;/* timeout for ADDBA response */
92 SYSCTL_PROC(_net_wlan, OID_AUTO, addba_timeout, CTLTYPE_INT | CTLFLAG_RW,
93         &ieee80211_addba_timeout, 0, ieee80211_sysctl_msecs_ticks, "I",
94         "ADDBA request timeout (ms)");
95 static  int ieee80211_addba_backoff = -1;/* backoff after max ADDBA requests */
96 SYSCTL_PROC(_net_wlan, OID_AUTO, addba_backoff, CTLTYPE_INT | CTLFLAG_RW,
97         &ieee80211_addba_backoff, 0, ieee80211_sysctl_msecs_ticks, "I",
98         "ADDBA request backoff (ms)");
99 static  int ieee80211_addba_maxtries = 3;/* max ADDBA requests before backoff */
100 SYSCTL_INT(_net_wlan, OID_AUTO, addba_maxtries, CTLTYPE_INT | CTLFLAG_RW,
101         &ieee80211_addba_maxtries, 0, "max ADDBA requests sent before backoff");
102
103 static  int ieee80211_bar_timeout = -1; /* timeout waiting for BAR response */
104 static  int ieee80211_bar_maxtries = 50;/* max BAR requests before DELBA */
105
106 static  ieee80211_recv_action_func ht_recv_action_ba_addba_request;
107 static  ieee80211_recv_action_func ht_recv_action_ba_addba_response;
108 static  ieee80211_recv_action_func ht_recv_action_ba_delba;
109 static  ieee80211_recv_action_func ht_recv_action_ht_mimopwrsave;
110 static  ieee80211_recv_action_func ht_recv_action_ht_txchwidth;
111
112 static  ieee80211_send_action_func ht_send_action_ba_addba;
113 static  ieee80211_send_action_func ht_send_action_ba_delba;
114 static  ieee80211_send_action_func ht_send_action_ht_txchwidth;
115
116 static void
117 ieee80211_ht_init(void)
118 {
119         /*
120          * Setup HT parameters that depends on the clock frequency.
121          */
122 #ifdef IEEE80211_AMPDU_AGE
123         ieee80211_ampdu_age = msecs_to_ticks(500);
124 #endif
125         ieee80211_addba_timeout = msecs_to_ticks(250);
126         ieee80211_addba_backoff = msecs_to_ticks(10*1000);
127         ieee80211_bar_timeout = msecs_to_ticks(250);
128         /*
129          * Register action frame handlers.
130          */
131         ieee80211_recv_action_register(IEEE80211_ACTION_CAT_BA, 
132             IEEE80211_ACTION_BA_ADDBA_REQUEST, ht_recv_action_ba_addba_request);
133         ieee80211_recv_action_register(IEEE80211_ACTION_CAT_BA, 
134             IEEE80211_ACTION_BA_ADDBA_RESPONSE, ht_recv_action_ba_addba_response);
135         ieee80211_recv_action_register(IEEE80211_ACTION_CAT_BA, 
136             IEEE80211_ACTION_BA_DELBA, ht_recv_action_ba_delba);
137         ieee80211_recv_action_register(IEEE80211_ACTION_CAT_HT, 
138             IEEE80211_ACTION_HT_MIMOPWRSAVE, ht_recv_action_ht_mimopwrsave);
139         ieee80211_recv_action_register(IEEE80211_ACTION_CAT_HT, 
140             IEEE80211_ACTION_HT_TXCHWIDTH, ht_recv_action_ht_txchwidth);
141
142         ieee80211_send_action_register(IEEE80211_ACTION_CAT_BA, 
143             IEEE80211_ACTION_BA_ADDBA_REQUEST, ht_send_action_ba_addba);
144         ieee80211_send_action_register(IEEE80211_ACTION_CAT_BA, 
145             IEEE80211_ACTION_BA_ADDBA_RESPONSE, ht_send_action_ba_addba);
146         ieee80211_send_action_register(IEEE80211_ACTION_CAT_BA, 
147             IEEE80211_ACTION_BA_DELBA, ht_send_action_ba_delba);
148         ieee80211_send_action_register(IEEE80211_ACTION_CAT_HT, 
149             IEEE80211_ACTION_HT_TXCHWIDTH, ht_send_action_ht_txchwidth);
150 }
151 SYSINIT(wlan_ht, SI_SUB_DRIVERS, SI_ORDER_FIRST, ieee80211_ht_init, NULL);
152
153 static int ieee80211_ampdu_enable(struct ieee80211_node *ni,
154         struct ieee80211_tx_ampdu *tap);
155 static int ieee80211_addba_request(struct ieee80211_node *ni,
156         struct ieee80211_tx_ampdu *tap,
157         int dialogtoken, int baparamset, int batimeout);
158 static int ieee80211_addba_response(struct ieee80211_node *ni,
159         struct ieee80211_tx_ampdu *tap,
160         int code, int baparamset, int batimeout);
161 static void ieee80211_addba_stop(struct ieee80211_node *ni,
162         struct ieee80211_tx_ampdu *tap);
163 static void ieee80211_bar_response(struct ieee80211_node *ni,
164         struct ieee80211_tx_ampdu *tap, int status);
165 static void ampdu_tx_stop(struct ieee80211_tx_ampdu *tap);
166 static void bar_stop_timer(struct ieee80211_tx_ampdu *tap);
167 static int ampdu_rx_start(struct ieee80211_node *, struct ieee80211_rx_ampdu *,
168         int baparamset, int batimeout, int baseqctl);
169 static void ampdu_rx_stop(struct ieee80211_node *, struct ieee80211_rx_ampdu *);
170
171 void
172 ieee80211_ht_attach(struct ieee80211com *ic)
173 {
174         /* setup default aggregation policy */
175         ic->ic_recv_action = ieee80211_recv_action;
176         ic->ic_send_action = ieee80211_send_action;
177         ic->ic_ampdu_enable = ieee80211_ampdu_enable;
178         ic->ic_addba_request = ieee80211_addba_request;
179         ic->ic_addba_response = ieee80211_addba_response;
180         ic->ic_addba_stop = ieee80211_addba_stop;
181         ic->ic_bar_response = ieee80211_bar_response;
182         ic->ic_ampdu_rx_start = ampdu_rx_start;
183         ic->ic_ampdu_rx_stop = ampdu_rx_stop;
184
185         ic->ic_htprotmode = IEEE80211_PROT_RTSCTS;
186         ic->ic_curhtprotmode = IEEE80211_HTINFO_OPMODE_PURE;
187 }
188
189 void
190 ieee80211_ht_detach(struct ieee80211com *ic)
191 {
192 }
193
194 void
195 ieee80211_ht_vattach(struct ieee80211vap *vap)
196 {
197
198         /* driver can override defaults */
199         vap->iv_ampdu_rxmax = IEEE80211_HTCAP_MAXRXAMPDU_8K;
200         vap->iv_ampdu_density = IEEE80211_HTCAP_MPDUDENSITY_NA;
201         vap->iv_ampdu_limit = vap->iv_ampdu_rxmax;
202         vap->iv_amsdu_limit = vap->iv_htcaps & IEEE80211_HTCAP_MAXAMSDU;
203         /* tx aggregation traffic thresholds */
204         vap->iv_ampdu_mintraffic[WME_AC_BK] = 128;
205         vap->iv_ampdu_mintraffic[WME_AC_BE] = 64;
206         vap->iv_ampdu_mintraffic[WME_AC_VO] = 32;
207         vap->iv_ampdu_mintraffic[WME_AC_VI] = 32;
208
209         if (vap->iv_htcaps & IEEE80211_HTC_HT) {
210                 /*
211                  * Device is HT capable; enable all HT-related
212                  * facilities by default.
213                  * XXX these choices may be too aggressive.
214                  */
215                 vap->iv_flags_ht |= IEEE80211_FHT_HT
216                                  |  IEEE80211_FHT_HTCOMPAT
217                                  ;
218                 if (vap->iv_htcaps & IEEE80211_HTCAP_SHORTGI20)
219                         vap->iv_flags_ht |= IEEE80211_FHT_SHORTGI20;
220                 /* XXX infer from channel list? */
221                 if (vap->iv_htcaps & IEEE80211_HTCAP_CHWIDTH40) {
222                         vap->iv_flags_ht |= IEEE80211_FHT_USEHT40;
223                         if (vap->iv_htcaps & IEEE80211_HTCAP_SHORTGI40)
224                                 vap->iv_flags_ht |= IEEE80211_FHT_SHORTGI40;
225                 }
226                 /* enable RIFS if capable */
227                 if (vap->iv_htcaps & IEEE80211_HTC_RIFS)
228                         vap->iv_flags_ht |= IEEE80211_FHT_RIFS;
229
230                 /* NB: A-MPDU and A-MSDU rx are mandated, these are tx only */
231                 vap->iv_flags_ht |= IEEE80211_FHT_AMPDU_RX;
232                 if (vap->iv_htcaps & IEEE80211_HTC_AMPDU)
233                         vap->iv_flags_ht |= IEEE80211_FHT_AMPDU_TX;
234                 vap->iv_flags_ht |= IEEE80211_FHT_AMSDU_RX;
235                 if (vap->iv_htcaps & IEEE80211_HTC_AMSDU)
236                         vap->iv_flags_ht |= IEEE80211_FHT_AMSDU_TX;
237         }
238         /* NB: disable default legacy WDS, too many issues right now */
239         if (vap->iv_flags_ext & IEEE80211_FEXT_WDSLEGACY)
240                 vap->iv_flags_ht &= ~IEEE80211_FHT_HT;
241 }
242
243 void
244 ieee80211_ht_vdetach(struct ieee80211vap *vap)
245 {
246 }
247
248 static void
249 ht_announce(struct ieee80211com *ic, int mode,
250         const struct ieee80211_htrateset *rs)
251 {
252         struct ifnet *ifp = ic->ic_ifp;
253         int i, rate, mword;
254
255         if_printf(ifp, "%s MCS: ", ieee80211_phymode_name[mode]);
256         for (i = 0; i < rs->rs_nrates; i++) {
257                 mword = ieee80211_rate2media(ic,
258                     rs->rs_rates[i] | IEEE80211_RATE_MCS, mode);
259                 if (IFM_SUBTYPE(mword) != IFM_IEEE80211_MCS)
260                         continue;
261                 rate = ieee80211_htrates[rs->rs_rates[i]].ht40_rate_400ns;
262                 kprintf("%s%d%sMbps", (i != 0 ? " " : ""),
263                     rate / 2, ((rate & 0x1) != 0 ? ".5" : ""));
264         }
265         kprintf("\n");
266 }
267
268 void
269 ieee80211_ht_announce(struct ieee80211com *ic)
270 {
271         if (isset(ic->ic_modecaps, IEEE80211_MODE_11NA))
272                 ht_announce(ic, IEEE80211_MODE_11NA, &ieee80211_rateset_11n);
273         if (isset(ic->ic_modecaps, IEEE80211_MODE_11NG))
274                 ht_announce(ic, IEEE80211_MODE_11NG, &ieee80211_rateset_11n);
275 }
276
277 const struct ieee80211_htrateset *
278 ieee80211_get_suphtrates(struct ieee80211com *ic,
279         const struct ieee80211_channel *c)
280 {
281         return &ieee80211_rateset_11n;
282 }
283
284 /*
285  * Receive processing.
286  */
287
288 /*
289  * Decap the encapsulated A-MSDU frames and dispatch all but
290  * the last for delivery.  The last frame is returned for 
291  * delivery via the normal path.
292  */
293 struct mbuf *
294 ieee80211_decap_amsdu(struct ieee80211_node *ni, struct mbuf *m)
295 {
296         struct ieee80211vap *vap = ni->ni_vap;
297         int framelen;
298         struct mbuf *n;
299
300         /* discard 802.3 header inserted by ieee80211_decap */
301         m_adj(m, sizeof(struct ether_header));
302
303         vap->iv_stats.is_amsdu_decap++;
304
305         for (;;) {
306                 /*
307                  * Decap the first frame, bust it apart from the
308                  * remainder and deliver.  We leave the last frame
309                  * delivery to the caller (for consistency with other
310                  * code paths, could also do it here).
311                  */
312                 m = ieee80211_decap1(m, &framelen);
313                 if (m == NULL) {
314                         IEEE80211_DISCARD_MAC(vap, IEEE80211_MSG_ANY,
315                             ni->ni_macaddr, "a-msdu", "%s", "decap failed");
316                         vap->iv_stats.is_amsdu_tooshort++;
317                         return NULL;
318                 }
319                 if (m->m_pkthdr.len == framelen)
320                         break;
321                 n = m_split(m, framelen, MB_DONTWAIT);
322                 if (n == NULL) {
323                         IEEE80211_DISCARD_MAC(vap, IEEE80211_MSG_ANY,
324                             ni->ni_macaddr, "a-msdu",
325                             "%s", "unable to split encapsulated frames");
326                         vap->iv_stats.is_amsdu_split++;
327                         m_freem(m);                     /* NB: must reclaim */
328                         return NULL;
329                 }
330                 vap->iv_deliver_data(vap, ni, m);
331
332                 /*
333                  * Remove frame contents; each intermediate frame
334                  * is required to be aligned to a 4-byte boundary.
335                  */
336                 m = n;
337                 m_adj(m, roundup2(framelen, 4) - framelen);     /* padding */
338         }
339         return m;                               /* last delivered by caller */
340 }
341
342 /*
343  * Purge all frames in the A-MPDU re-order queue.
344  */
345 static void
346 ampdu_rx_purge(struct ieee80211_rx_ampdu *rap)
347 {
348         struct mbuf *m;
349         int i;
350
351         for (i = 0; i < rap->rxa_wnd; i++) {
352                 m = rap->rxa_m[i];
353                 if (m != NULL) {
354                         rap->rxa_m[i] = NULL;
355                         rap->rxa_qbytes -= m->m_pkthdr.len;
356                         m_freem(m);
357                         if (--rap->rxa_qframes == 0)
358                                 break;
359                 }
360         }
361         KASSERT(rap->rxa_qbytes == 0 && rap->rxa_qframes == 0,
362             ("lost %u data, %u frames on ampdu rx q",
363             rap->rxa_qbytes, rap->rxa_qframes));
364 }
365
366 /*
367  * Start A-MPDU rx/re-order processing for the specified TID.
368  */
369 static int
370 ampdu_rx_start(struct ieee80211_node *ni, struct ieee80211_rx_ampdu *rap,
371         int baparamset, int batimeout, int baseqctl)
372 {
373         int bufsiz = MS(baparamset, IEEE80211_BAPS_BUFSIZ);
374
375         if (rap->rxa_flags & IEEE80211_AGGR_RUNNING) {
376                 /*
377                  * AMPDU previously setup and not terminated with a DELBA,
378                  * flush the reorder q's in case anything remains.
379                  */
380                 ampdu_rx_purge(rap);
381         }
382         memset(rap, 0, sizeof(*rap));
383         rap->rxa_wnd = (bufsiz == 0) ?
384             IEEE80211_AGGR_BAWMAX : min(bufsiz, IEEE80211_AGGR_BAWMAX);
385         rap->rxa_start = MS(baseqctl, IEEE80211_BASEQ_START);
386         rap->rxa_flags |=  IEEE80211_AGGR_RUNNING | IEEE80211_AGGR_XCHGPEND;
387
388         return 0;
389 }
390
391 /*
392  * Stop A-MPDU rx processing for the specified TID.
393  */
394 static void
395 ampdu_rx_stop(struct ieee80211_node *ni, struct ieee80211_rx_ampdu *rap)
396 {
397         ampdu_rx_purge(rap);
398         rap->rxa_flags &= ~(IEEE80211_AGGR_RUNNING | IEEE80211_AGGR_XCHGPEND);
399 }
400
401 /*
402  * Dispatch a frame from the A-MPDU reorder queue.  The
403  * frame is fed back into ieee80211_input marked with an
404  * M_AMPDU_MPDU flag so it doesn't come back to us (it also
405  * permits ieee80211_input to optimize re-processing).
406  */
407 static __inline void
408 ampdu_dispatch(struct ieee80211_node *ni, struct mbuf *m)
409 {
410         m->m_flags |= M_AMPDU_MPDU;     /* bypass normal processing */
411         /* NB: rssi and noise are ignored w/ M_AMPDU_MPDU set */
412         (void) ieee80211_input(ni, m, 0, 0);
413 }
414
415 /*
416  * Dispatch as many frames as possible from the re-order queue.
417  * Frames will always be "at the front"; we process all frames
418  * up to the first empty slot in the window.  On completion we
419  * cleanup state if there are still pending frames in the current
420  * BA window.  We assume the frame at slot 0 is already handled
421  * by the caller; we always start at slot 1.
422  */
423 static void
424 ampdu_rx_dispatch(struct ieee80211_rx_ampdu *rap, struct ieee80211_node *ni)
425 {
426         struct ieee80211vap *vap = ni->ni_vap;
427         struct mbuf *m;
428         int i;
429
430         /* flush run of frames */
431         for (i = 1; i < rap->rxa_wnd; i++) {
432                 m = rap->rxa_m[i];
433                 if (m == NULL)
434                         break;
435                 rap->rxa_m[i] = NULL;
436                 rap->rxa_qbytes -= m->m_pkthdr.len;
437                 rap->rxa_qframes--;
438
439                 ampdu_dispatch(ni, m);
440         }
441         /*
442          * If frames remain, copy the mbuf pointers down so
443          * they correspond to the offsets in the new window.
444          */
445         if (rap->rxa_qframes != 0) {
446                 int n = rap->rxa_qframes, j;
447                 for (j = i+1; j < rap->rxa_wnd; j++) {
448                         if (rap->rxa_m[j] != NULL) {
449                                 rap->rxa_m[j-i] = rap->rxa_m[j];
450                                 rap->rxa_m[j] = NULL;
451                                 if (--n == 0)
452                                         break;
453                         }
454                 }
455                 KASSERT(n == 0, ("lost %d frames", n));
456                 vap->iv_stats.is_ampdu_rx_copy += rap->rxa_qframes;
457         }
458         /*
459          * Adjust the start of the BA window to
460          * reflect the frames just dispatched.
461          */
462         rap->rxa_start = IEEE80211_SEQ_ADD(rap->rxa_start, i);
463         vap->iv_stats.is_ampdu_rx_oor += i;
464 }
465
466 #ifdef IEEE80211_AMPDU_AGE
467 /*
468  * Dispatch all frames in the A-MPDU re-order queue.
469  */
470 static void
471 ampdu_rx_flush(struct ieee80211_node *ni, struct ieee80211_rx_ampdu *rap)
472 {
473         struct ieee80211vap *vap = ni->ni_vap;
474         struct mbuf *m;
475         int i;
476
477         for (i = 0; i < rap->rxa_wnd; i++) {
478                 m = rap->rxa_m[i];
479                 if (m == NULL)
480                         continue;
481                 rap->rxa_m[i] = NULL;
482                 rap->rxa_qbytes -= m->m_pkthdr.len;
483                 rap->rxa_qframes--;
484                 vap->iv_stats.is_ampdu_rx_oor++;
485
486                 ampdu_dispatch(ni, m);
487                 if (rap->rxa_qframes == 0)
488                         break;
489         }
490 }
491 #endif /* IEEE80211_AMPDU_AGE */
492
493 /*
494  * Dispatch all frames in the A-MPDU re-order queue
495  * preceding the specified sequence number.  This logic
496  * handles window moves due to a received MSDU or BAR.
497  */
498 static void
499 ampdu_rx_flush_upto(struct ieee80211_node *ni,
500         struct ieee80211_rx_ampdu *rap, ieee80211_seq winstart)
501 {
502         struct ieee80211vap *vap = ni->ni_vap;
503         struct mbuf *m;
504         ieee80211_seq seqno;
505         int i;
506
507         /*
508          * Flush any complete MSDU's with a sequence number lower
509          * than winstart.  Gaps may exist.  Note that we may actually
510          * dispatch frames past winstart if a run continues; this is
511          * an optimization that avoids having to do a separate pass
512          * to dispatch frames after moving the BA window start.
513          */
514         seqno = rap->rxa_start;
515         for (i = 0; i < rap->rxa_wnd; i++) {
516                 m = rap->rxa_m[i];
517                 if (m != NULL) {
518                         rap->rxa_m[i] = NULL;
519                         rap->rxa_qbytes -= m->m_pkthdr.len;
520                         rap->rxa_qframes--;
521                         vap->iv_stats.is_ampdu_rx_oor++;
522
523                         ampdu_dispatch(ni, m);
524                 } else {
525                         if (!IEEE80211_SEQ_BA_BEFORE(seqno, winstart))
526                                 break;
527                 }
528                 seqno = IEEE80211_SEQ_INC(seqno);
529         }
530         /*
531          * If frames remain, copy the mbuf pointers down so
532          * they correspond to the offsets in the new window.
533          */
534         if (rap->rxa_qframes != 0) {
535                 int n = rap->rxa_qframes, j;
536
537                 /* NB: this loop assumes i > 0 and/or rxa_m[0] is NULL */
538                 KASSERT(rap->rxa_m[0] == NULL,
539                     ("%s: BA window slot 0 occupied", __func__));
540                 for (j = i+1; j < rap->rxa_wnd; j++) {
541                         if (rap->rxa_m[j] != NULL) {
542                                 rap->rxa_m[j-i] = rap->rxa_m[j];
543                                 rap->rxa_m[j] = NULL;
544                                 if (--n == 0)
545                                         break;
546                         }
547                 }
548                 KASSERT(n == 0, ("%s: lost %d frames, qframes %d off %d "
549                     "BA win <%d:%d> winstart %d",
550                     __func__, n, rap->rxa_qframes, i, rap->rxa_start,
551                     IEEE80211_SEQ_ADD(rap->rxa_start, rap->rxa_wnd-1),
552                     winstart));
553                 vap->iv_stats.is_ampdu_rx_copy += rap->rxa_qframes;
554         }
555         /*
556          * Move the start of the BA window; we use the
557          * sequence number of the last MSDU that was
558          * passed up the stack+1 or winstart if stopped on
559          * a gap in the reorder buffer.
560          */
561         rap->rxa_start = seqno;
562 }
563
564 /*
565  * Process a received QoS data frame for an HT station.  Handle
566  * A-MPDU reordering: if this frame is received out of order
567  * and falls within the BA window hold onto it.  Otherwise if
568  * this frame completes a run, flush any pending frames.  We
569  * return 1 if the frame is consumed.  A 0 is returned if
570  * the frame should be processed normally by the caller.
571  */
572 int
573 ieee80211_ampdu_reorder(struct ieee80211_node *ni, struct mbuf *m)
574 {
575 #define IEEE80211_FC0_QOSDATA \
576         (IEEE80211_FC0_TYPE_DATA|IEEE80211_FC0_SUBTYPE_QOS|IEEE80211_FC0_VERSION_0)
577 #define PROCESS         0       /* caller should process frame */
578 #define CONSUMED        1       /* frame consumed, caller does nothing */
579         struct ieee80211vap *vap = ni->ni_vap;
580         struct ieee80211_qosframe *wh;
581         struct ieee80211_rx_ampdu *rap;
582         ieee80211_seq rxseq;
583         uint8_t tid;
584         int off;
585
586         KASSERT((m->m_flags & (M_AMPDU | M_AMPDU_MPDU)) == M_AMPDU,
587             ("!a-mpdu or already re-ordered, flags 0x%x", m->m_flags));
588         KASSERT(ni->ni_flags & IEEE80211_NODE_HT, ("not an HT sta"));
589
590         /* NB: m_len known to be sufficient */
591         wh = mtod(m, struct ieee80211_qosframe *);
592         if (wh->i_fc[0] != IEEE80211_FC0_QOSDATA) {
593                 /*
594                  * Not QoS data, shouldn't get here but just
595                  * return it to the caller for processing.
596                  */
597                 return PROCESS;
598         }
599         if (IEEE80211_IS_DSTODS(wh))
600                 tid = ((struct ieee80211_qosframe_addr4 *)wh)->i_qos[0];
601         else
602                 tid = wh->i_qos[0];
603         tid &= IEEE80211_QOS_TID;
604         rap = &ni->ni_rx_ampdu[tid];
605         if ((rap->rxa_flags & IEEE80211_AGGR_XCHGPEND) == 0) {
606                 /*
607                  * No ADDBA request yet, don't touch.
608                  */
609                 return PROCESS;
610         }
611         rxseq = le16toh(*(uint16_t *)wh->i_seq);
612         if ((rxseq & IEEE80211_SEQ_FRAG_MASK) != 0) {
613                 /*
614                  * Fragments are not allowed; toss.
615                  */
616                 IEEE80211_DISCARD_MAC(vap,
617                     IEEE80211_MSG_INPUT | IEEE80211_MSG_11N, ni->ni_macaddr,
618                     "A-MPDU", "fragment, rxseq 0x%x tid %u%s", rxseq, tid,
619                     wh->i_fc[1] & IEEE80211_FC1_RETRY ? " (retransmit)" : "");
620                 vap->iv_stats.is_ampdu_rx_drop++;
621                 IEEE80211_NODE_STAT(ni, rx_drop);
622                 m_freem(m);
623                 return CONSUMED;
624         }
625         rxseq >>= IEEE80211_SEQ_SEQ_SHIFT;
626         rap->rxa_nframes++;
627 again:
628         if (rxseq == rap->rxa_start) {
629                 /*
630                  * First frame in window.
631                  */
632                 if (rap->rxa_qframes != 0) {
633                         /*
634                          * Dispatch as many packets as we can.
635                          */
636                         KASSERT(rap->rxa_m[0] == NULL, ("unexpected dup"));
637                         ampdu_dispatch(ni, m);
638                         ampdu_rx_dispatch(rap, ni);
639                         return CONSUMED;
640                 } else {
641                         /*
642                          * In order; advance window and notify
643                          * caller to dispatch directly.
644                          */
645                         rap->rxa_start = IEEE80211_SEQ_INC(rxseq);
646                         return PROCESS;
647                 }
648         }
649         /*
650          * Frame is out of order; store if in the BA window.
651          */
652         /* calculate offset in BA window */
653         off = IEEE80211_SEQ_SUB(rxseq, rap->rxa_start);
654         if (off < rap->rxa_wnd) {
655                 /*
656                  * Common case (hopefully): in the BA window.
657                  * Sec 9.10.7.6 a) (D2.04 p.118 line 47)
658                  */
659 #ifdef IEEE80211_AMPDU_AGE
660                 /* 
661                  * Check for frames sitting too long in the reorder queue.
662                  * This should only ever happen if frames are not delivered
663                  * without the sender otherwise notifying us (e.g. with a
664                  * BAR to move the window).  Typically this happens because
665                  * of vendor bugs that cause the sequence number to jump.
666                  * When this happens we get a gap in the reorder queue that
667                  * leaves frame sitting on the queue until they get pushed
668                  * out due to window moves.  When the vendor does not send
669                  * BAR this move only happens due to explicit packet sends
670                  *
671                  * NB: we only track the time of the oldest frame in the
672                  * reorder q; this means that if we flush we might push
673                  * frames that still "new"; if this happens then subsequent
674                  * frames will result in BA window moves which cost something
675                  * but is still better than a big throughput dip.
676                  */
677                 if (rap->rxa_qframes != 0) {
678                         /* XXX honor batimeout? */
679                         if (ticks - rap->rxa_age > ieee80211_ampdu_age) {
680                                 /*
681                                  * Too long since we received the first
682                                  * frame; flush the reorder buffer.
683                                  */
684                                 if (rap->rxa_qframes != 0) {
685                                         vap->iv_stats.is_ampdu_rx_age +=
686                                             rap->rxa_qframes;
687                                         ampdu_rx_flush(ni, rap);
688                                 }
689                                 rap->rxa_start = IEEE80211_SEQ_INC(rxseq);
690                                 return PROCESS;
691                         }
692                 } else {
693                         /*
694                          * First frame, start aging timer.
695                          */
696                         rap->rxa_age = ticks;
697                 }
698 #endif /* IEEE80211_AMPDU_AGE */
699                 /* save packet */
700                 if (rap->rxa_m[off] == NULL) {
701                         rap->rxa_m[off] = m;
702                         rap->rxa_qframes++;
703                         rap->rxa_qbytes += m->m_pkthdr.len;
704                         vap->iv_stats.is_ampdu_rx_reorder++;
705                 } else {
706                         IEEE80211_DISCARD_MAC(vap,
707                             IEEE80211_MSG_INPUT | IEEE80211_MSG_11N,
708                             ni->ni_macaddr, "a-mpdu duplicate",
709                             "seqno %u tid %u BA win <%u:%u>",
710                             rxseq, tid, rap->rxa_start,
711                             IEEE80211_SEQ_ADD(rap->rxa_start, rap->rxa_wnd-1));
712                         vap->iv_stats.is_rx_dup++;
713                         IEEE80211_NODE_STAT(ni, rx_dup);
714                         m_freem(m);
715                 }
716                 return CONSUMED;
717         }
718         if (off < IEEE80211_SEQ_BA_RANGE) {
719                 /*
720                  * Outside the BA window, but within range;
721                  * flush the reorder q and move the window.
722                  * Sec 9.10.7.6 b) (D2.04 p.118 line 60)
723                  */
724                 IEEE80211_NOTE(vap, IEEE80211_MSG_11N, ni,
725                     "move BA win <%u:%u> (%u frames) rxseq %u tid %u",
726                     rap->rxa_start,
727                     IEEE80211_SEQ_ADD(rap->rxa_start, rap->rxa_wnd-1),
728                     rap->rxa_qframes, rxseq, tid);
729                 vap->iv_stats.is_ampdu_rx_move++;
730
731                 /*
732                  * The spec says to flush frames up to but not including:
733                  *      WinStart_B = rxseq - rap->rxa_wnd + 1
734                  * Then insert the frame or notify the caller to process
735                  * it immediately.  We can safely do this by just starting
736                  * over again because we know the frame will now be within
737                  * the BA window.
738                  */
739                 /* NB: rxa_wnd known to be >0 */
740                 ampdu_rx_flush_upto(ni, rap,
741                     IEEE80211_SEQ_SUB(rxseq, rap->rxa_wnd-1));
742                 goto again;
743         } else {
744                 /*
745                  * Outside the BA window and out of range; toss.
746                  * Sec 9.10.7.6 c) (D2.04 p.119 line 16)
747                  */
748                 IEEE80211_DISCARD_MAC(vap,
749                     IEEE80211_MSG_INPUT | IEEE80211_MSG_11N, ni->ni_macaddr,
750                     "MPDU", "BA win <%u:%u> (%u frames) rxseq %u tid %u%s",
751                     rap->rxa_start,
752                     IEEE80211_SEQ_ADD(rap->rxa_start, rap->rxa_wnd-1),
753                     rap->rxa_qframes, rxseq, tid,
754                     wh->i_fc[1] & IEEE80211_FC1_RETRY ? " (retransmit)" : "");
755                 vap->iv_stats.is_ampdu_rx_drop++;
756                 IEEE80211_NODE_STAT(ni, rx_drop);
757                 m_freem(m);
758                 return CONSUMED;
759         }
760 #undef CONSUMED
761 #undef PROCESS
762 #undef IEEE80211_FC0_QOSDATA
763 }
764
765 /*
766  * Process a BAR ctl frame.  Dispatch all frames up to
767  * the sequence number of the frame.  If this frame is
768  * out of range it's discarded.
769  */
770 void
771 ieee80211_recv_bar(struct ieee80211_node *ni, struct mbuf *m0)
772 {
773         struct ieee80211vap *vap = ni->ni_vap;
774         struct ieee80211_frame_bar *wh;
775         struct ieee80211_rx_ampdu *rap;
776         ieee80211_seq rxseq;
777         int tid, off;
778
779         if (!ieee80211_recv_bar_ena) {
780 #if 0
781                 IEEE80211_DISCARD_MAC(vap, IEEE80211_MSG_11N,
782                     ni->ni_macaddr, "BAR", "%s", "processing disabled");
783 #endif
784                 vap->iv_stats.is_ampdu_bar_bad++;
785                 return;
786         }
787         wh = mtod(m0, struct ieee80211_frame_bar *);
788         /* XXX check basic BAR */
789         tid = MS(le16toh(wh->i_ctl), IEEE80211_BAR_TID);
790         rap = &ni->ni_rx_ampdu[tid];
791         if ((rap->rxa_flags & IEEE80211_AGGR_XCHGPEND) == 0) {
792                 /*
793                  * No ADDBA request yet, don't touch.
794                  */
795                 IEEE80211_DISCARD_MAC(vap,
796                     IEEE80211_MSG_INPUT | IEEE80211_MSG_11N,
797                     ni->ni_macaddr, "BAR", "no BA stream, tid %u", tid);
798                 vap->iv_stats.is_ampdu_bar_bad++;
799                 return;
800         }
801         vap->iv_stats.is_ampdu_bar_rx++;
802         rxseq = le16toh(wh->i_seq) >> IEEE80211_SEQ_SEQ_SHIFT;
803         if (rxseq == rap->rxa_start)
804                 return;
805         /* calculate offset in BA window */
806         off = IEEE80211_SEQ_SUB(rxseq, rap->rxa_start);
807         if (off < IEEE80211_SEQ_BA_RANGE) {
808                 /*
809                  * Flush the reorder q up to rxseq and move the window.
810                  * Sec 9.10.7.6 a) (D2.04 p.119 line 22)
811                  */
812                 IEEE80211_NOTE(vap, IEEE80211_MSG_11N, ni,
813                     "BAR moves BA win <%u:%u> (%u frames) rxseq %u tid %u",
814                     rap->rxa_start,
815                     IEEE80211_SEQ_ADD(rap->rxa_start, rap->rxa_wnd-1),
816                     rap->rxa_qframes, rxseq, tid);
817                 vap->iv_stats.is_ampdu_bar_move++;
818
819                 ampdu_rx_flush_upto(ni, rap, rxseq);
820                 if (off >= rap->rxa_wnd) {
821                         /*
822                          * BAR specifies a window start to the right of BA
823                          * window; we must move it explicitly since
824                          * ampdu_rx_flush_upto will not.
825                          */
826                         rap->rxa_start = rxseq;
827                 }
828         } else {
829                 /*
830                  * Out of range; toss.
831                  * Sec 9.10.7.6 b) (D2.04 p.119 line 41)
832                  */
833                 IEEE80211_DISCARD_MAC(vap,
834                     IEEE80211_MSG_INPUT | IEEE80211_MSG_11N, ni->ni_macaddr,
835                     "BAR", "BA win <%u:%u> (%u frames) rxseq %u tid %u%s",
836                     rap->rxa_start,
837                     IEEE80211_SEQ_ADD(rap->rxa_start, rap->rxa_wnd-1),
838                     rap->rxa_qframes, rxseq, tid,
839                     wh->i_fc[1] & IEEE80211_FC1_RETRY ? " (retransmit)" : "");
840                 vap->iv_stats.is_ampdu_bar_oow++;
841                 IEEE80211_NODE_STAT(ni, rx_drop);
842         }
843 }
844
845 /*
846  * Setup HT-specific state in a node.  Called only
847  * when HT use is negotiated so we don't do extra
848  * work for temporary and/or legacy sta's.
849  */
850 void
851 ieee80211_ht_node_init(struct ieee80211_node *ni)
852 {
853         struct ieee80211_tx_ampdu *tap;
854         int ac;
855
856         if (ni->ni_flags & IEEE80211_NODE_HT) {
857                 /*
858                  * Clean AMPDU state on re-associate.  This handles the case
859                  * where a station leaves w/o notifying us and then returns
860                  * before node is reaped for inactivity.
861                  */
862                 ieee80211_ht_node_cleanup(ni);
863         }
864         for (ac = 0; ac < WME_NUM_AC; ac++) {
865                 tap = &ni->ni_tx_ampdu[ac];
866                 tap->txa_ac = ac;
867                 tap->txa_ni = ni;
868                 /* NB: further initialization deferred */
869         }
870         ni->ni_flags |= IEEE80211_NODE_HT | IEEE80211_NODE_AMPDU;
871 }
872
873 /*
874  * Cleanup HT-specific state in a node.  Called only
875  * when HT use has been marked.
876  */
877 void
878 ieee80211_ht_node_cleanup(struct ieee80211_node *ni)
879 {
880         struct ieee80211com *ic = ni->ni_ic;
881         int i;
882
883         KASSERT(ni->ni_flags & IEEE80211_NODE_HT, ("not an HT node"));
884
885         /* XXX optimize this */
886         for (i = 0; i < WME_NUM_AC; i++) {
887                 struct ieee80211_tx_ampdu *tap = &ni->ni_tx_ampdu[i];
888                 if (tap->txa_flags & IEEE80211_AGGR_SETUP)
889                         ampdu_tx_stop(tap);
890         }
891         for (i = 0; i < WME_NUM_TID; i++)
892                 ic->ic_ampdu_rx_stop(ni, &ni->ni_rx_ampdu[i]);
893
894         ni->ni_htcap = 0;
895         ni->ni_flags &= ~IEEE80211_NODE_HT_ALL;
896 }
897
898 /*
899  * Age out HT resources for a station.
900  */
901 void
902 ieee80211_ht_node_age(struct ieee80211_node *ni)
903 {
904 #ifdef IEEE80211_AMPDU_AGE
905         struct ieee80211vap *vap = ni->ni_vap;
906         uint8_t tid;
907 #endif
908
909         KASSERT(ni->ni_flags & IEEE80211_NODE_HT, ("not an HT sta"));
910
911 #ifdef IEEE80211_AMPDU_AGE
912         for (tid = 0; tid < WME_NUM_TID; tid++) {
913                 struct ieee80211_rx_ampdu *rap;
914
915                 rap = &ni->ni_rx_ampdu[tid];
916                 if ((rap->rxa_flags & IEEE80211_AGGR_XCHGPEND) == 0)
917                         continue;
918                 if (rap->rxa_qframes == 0)
919                         continue;
920                 /* 
921                  * Check for frames sitting too long in the reorder queue.
922                  * See above for more details on what's happening here.
923                  */
924                 /* XXX honor batimeout? */
925                 if (ticks - rap->rxa_age > ieee80211_ampdu_age) {
926                         /*
927                          * Too long since we received the first
928                          * frame; flush the reorder buffer.
929                          */
930                         vap->iv_stats.is_ampdu_rx_age += rap->rxa_qframes;
931                         ampdu_rx_flush(ni, rap);
932                 }
933         }
934 #endif /* IEEE80211_AMPDU_AGE */
935 }
936
937 static struct ieee80211_channel *
938 findhtchan(struct ieee80211com *ic, struct ieee80211_channel *c, int htflags)
939 {
940         return ieee80211_find_channel(ic, c->ic_freq,
941             (c->ic_flags &~ IEEE80211_CHAN_HT) | htflags);
942 }
943
944 /*
945  * Adjust a channel to be HT/non-HT according to the vap's configuration.
946  */
947 struct ieee80211_channel *
948 ieee80211_ht_adjust_channel(struct ieee80211com *ic,
949         struct ieee80211_channel *chan, int flags)
950 {
951         struct ieee80211_channel *c;
952
953         if (flags & IEEE80211_FHT_HT) {
954                 /* promote to HT if possible */
955                 if (flags & IEEE80211_FHT_USEHT40) {
956                         if (!IEEE80211_IS_CHAN_HT40(chan)) {
957                                 /* NB: arbitrarily pick ht40+ over ht40- */
958                                 c = findhtchan(ic, chan, IEEE80211_CHAN_HT40U);
959                                 if (c == NULL)
960                                         c = findhtchan(ic, chan,
961                                                 IEEE80211_CHAN_HT40D);
962                                 if (c == NULL)
963                                         c = findhtchan(ic, chan,
964                                                 IEEE80211_CHAN_HT20);
965                                 if (c != NULL)
966                                         chan = c;
967                         }
968                 } else if (!IEEE80211_IS_CHAN_HT20(chan)) {
969                         c = findhtchan(ic, chan, IEEE80211_CHAN_HT20);
970                         if (c != NULL)
971                                 chan = c;
972                 }
973         } else if (IEEE80211_IS_CHAN_HT(chan)) {
974                 /* demote to legacy, HT use is disabled */
975                 c = ieee80211_find_channel(ic, chan->ic_freq,
976                     chan->ic_flags &~ IEEE80211_CHAN_HT);
977                 if (c != NULL)
978                         chan = c;
979         }
980         return chan;
981 }
982
983 /*
984  * Setup HT-specific state for a legacy WDS peer.
985  */
986 void
987 ieee80211_ht_wds_init(struct ieee80211_node *ni)
988 {
989         struct ieee80211vap *vap = ni->ni_vap;
990         struct ieee80211_tx_ampdu *tap;
991         int ac;
992
993         KASSERT(vap->iv_flags_ht & IEEE80211_FHT_HT, ("no HT requested"));
994
995         /* XXX check scan cache in case peer has an ap and we have info */
996         /*
997          * If setup with a legacy channel; locate an HT channel.
998          * Otherwise if the inherited channel (from a companion
999          * AP) is suitable use it so we use the same location
1000          * for the extension channel).
1001          */
1002         ni->ni_chan = ieee80211_ht_adjust_channel(ni->ni_ic,
1003             ni->ni_chan, ieee80211_htchanflags(ni->ni_chan));
1004
1005         ni->ni_htcap = 0;
1006         if (vap->iv_flags_ht & IEEE80211_FHT_SHORTGI20)
1007                 ni->ni_htcap |= IEEE80211_HTCAP_SHORTGI20;
1008         if (IEEE80211_IS_CHAN_HT40(ni->ni_chan)) {
1009                 ni->ni_htcap |= IEEE80211_HTCAP_CHWIDTH40;
1010                 ni->ni_chw = 40;
1011                 if (IEEE80211_IS_CHAN_HT40U(ni->ni_chan))
1012                         ni->ni_ht2ndchan = IEEE80211_HTINFO_2NDCHAN_ABOVE;
1013                 else if (IEEE80211_IS_CHAN_HT40D(ni->ni_chan))
1014                         ni->ni_ht2ndchan = IEEE80211_HTINFO_2NDCHAN_BELOW;
1015                 if (vap->iv_flags_ht & IEEE80211_FHT_SHORTGI40)
1016                         ni->ni_htcap |= IEEE80211_HTCAP_SHORTGI40;
1017         } else {
1018                 ni->ni_chw = 20;
1019                 ni->ni_ht2ndchan = IEEE80211_HTINFO_2NDCHAN_NONE;
1020         }
1021         ni->ni_htctlchan = ni->ni_chan->ic_ieee;
1022         if (vap->iv_flags_ht & IEEE80211_FHT_RIFS)
1023                 ni->ni_flags |= IEEE80211_NODE_RIFS;
1024         /* XXX does it make sense to enable SMPS? */
1025
1026         ni->ni_htopmode = 0;            /* XXX need protection state */
1027         ni->ni_htstbc = 0;              /* XXX need info */
1028
1029         for (ac = 0; ac < WME_NUM_AC; ac++) {
1030                 tap = &ni->ni_tx_ampdu[ac];
1031                 tap->txa_ac = ac;
1032         }
1033         /* NB: AMPDU tx/rx governed by IEEE80211_FHT_AMPDU_{TX,RX} */
1034         ni->ni_flags |= IEEE80211_NODE_HT | IEEE80211_NODE_AMPDU;
1035 }
1036
1037 /*
1038  * Notify hostap vaps of a change in the HTINFO ie.
1039  */
1040 static void
1041 htinfo_notify(struct ieee80211com *ic)
1042 {
1043         struct ieee80211vap *vap;
1044         int first = 1;
1045
1046         TAILQ_FOREACH(vap, &ic->ic_vaps, iv_next) {
1047                 if (vap->iv_opmode != IEEE80211_M_HOSTAP)
1048                         continue;
1049                 if (vap->iv_state != IEEE80211_S_RUN ||
1050                     !IEEE80211_IS_CHAN_HT(vap->iv_bss->ni_chan))
1051                         continue;
1052                 if (first) {
1053                         IEEE80211_NOTE(vap,
1054                             IEEE80211_MSG_ASSOC | IEEE80211_MSG_11N,
1055                             vap->iv_bss,
1056                             "HT bss occupancy change: %d sta, %d ht, "
1057                             "%d ht40%s, HT protmode now 0x%x"
1058                             , ic->ic_sta_assoc
1059                             , ic->ic_ht_sta_assoc
1060                             , ic->ic_ht40_sta_assoc
1061                             , (ic->ic_flags_ht & IEEE80211_FHT_NONHT_PR) ?
1062                                  ", non-HT sta present" : ""
1063                             , ic->ic_curhtprotmode);
1064                         first = 0;
1065                 }
1066                 ieee80211_beacon_notify(vap, IEEE80211_BEACON_HTINFO);
1067         }
1068 }
1069
1070 /*
1071  * Calculate HT protection mode from current
1072  * state and handle updates.
1073  */
1074 static void
1075 htinfo_update(struct ieee80211com *ic)
1076 {
1077         uint8_t protmode;
1078
1079         if (ic->ic_sta_assoc != ic->ic_ht_sta_assoc) {
1080                 protmode = IEEE80211_HTINFO_OPMODE_MIXED
1081                          | IEEE80211_HTINFO_NONHT_PRESENT;
1082         } else if (ic->ic_flags_ht & IEEE80211_FHT_NONHT_PR) {
1083                 protmode = IEEE80211_HTINFO_OPMODE_PROTOPT
1084                          | IEEE80211_HTINFO_NONHT_PRESENT;
1085         } else if (ic->ic_bsschan != IEEE80211_CHAN_ANYC &&
1086             IEEE80211_IS_CHAN_HT40(ic->ic_bsschan) && 
1087             ic->ic_sta_assoc != ic->ic_ht40_sta_assoc) {
1088                 protmode = IEEE80211_HTINFO_OPMODE_HT20PR;
1089         } else {
1090                 protmode = IEEE80211_HTINFO_OPMODE_PURE;
1091         }
1092         if (protmode != ic->ic_curhtprotmode) {
1093                 ic->ic_curhtprotmode = protmode;
1094                 htinfo_notify(ic);
1095         }
1096 }
1097
1098 /*
1099  * Handle an HT station joining a BSS.
1100  */
1101 void
1102 ieee80211_ht_node_join(struct ieee80211_node *ni)
1103 {
1104         struct ieee80211com *ic = ni->ni_ic;
1105
1106         if (ni->ni_flags & IEEE80211_NODE_HT) {
1107                 ic->ic_ht_sta_assoc++;
1108                 if (ni->ni_chw == 40)
1109                         ic->ic_ht40_sta_assoc++;
1110         }
1111         htinfo_update(ic);
1112 }
1113
1114 /*
1115  * Handle an HT station leaving a BSS.
1116  */
1117 void
1118 ieee80211_ht_node_leave(struct ieee80211_node *ni)
1119 {
1120         struct ieee80211com *ic = ni->ni_ic;
1121
1122         if (ni->ni_flags & IEEE80211_NODE_HT) {
1123                 ic->ic_ht_sta_assoc--;
1124                 if (ni->ni_chw == 40)
1125                         ic->ic_ht40_sta_assoc--;
1126         }
1127         htinfo_update(ic);
1128 }
1129
1130 /*
1131  * Public version of htinfo_update; used for processing
1132  * beacon frames from overlapping bss.
1133  *
1134  * Caller can specify either IEEE80211_HTINFO_OPMODE_MIXED
1135  * (on receipt of a beacon that advertises MIXED) or
1136  * IEEE80211_HTINFO_OPMODE_PROTOPT (on receipt of a beacon
1137  * from an overlapping legacy bss).  We treat MIXED with
1138  * a higher precedence than PROTOPT (i.e. we will not change
1139  * change PROTOPT -> MIXED; only MIXED -> PROTOPT).  This
1140  * corresponds to how we handle things in htinfo_update.
1141  */
1142 void
1143 ieee80211_htprot_update(struct ieee80211com *ic, int protmode)
1144 {
1145 #define OPMODE(x)       SM(x, IEEE80211_HTINFO_OPMODE)
1146         /* track non-HT station presence */
1147         KASSERT(protmode & IEEE80211_HTINFO_NONHT_PRESENT,
1148             ("protmode 0x%x", protmode));
1149         ic->ic_flags_ht |= IEEE80211_FHT_NONHT_PR;
1150         ic->ic_lastnonht = ticks;
1151
1152         if (protmode != ic->ic_curhtprotmode &&
1153             (OPMODE(ic->ic_curhtprotmode) != IEEE80211_HTINFO_OPMODE_MIXED ||
1154              OPMODE(protmode) == IEEE80211_HTINFO_OPMODE_PROTOPT)) {
1155                 /* push beacon update */
1156                 ic->ic_curhtprotmode = protmode;
1157                 htinfo_notify(ic);
1158         }
1159 #undef OPMODE
1160 }
1161
1162 /*
1163  * Time out presence of an overlapping bss with non-HT
1164  * stations.  When operating in hostap mode we listen for
1165  * beacons from other stations and if we identify a non-HT
1166  * station is present we update the opmode field of the
1167  * HTINFO ie.  To identify when all non-HT stations are
1168  * gone we time out this condition.
1169  */
1170 void
1171 ieee80211_ht_timeout(struct ieee80211com *ic)
1172 {
1173         if ((ic->ic_flags_ht & IEEE80211_FHT_NONHT_PR) &&
1174             time_after(ticks, ic->ic_lastnonht + IEEE80211_NONHT_PRESENT_AGE)) {
1175 #if 0
1176                 IEEE80211_NOTE(vap, IEEE80211_MSG_11N, ni,
1177                     "%s", "time out non-HT STA present on channel");
1178 #endif
1179                 ic->ic_flags_ht &= ~IEEE80211_FHT_NONHT_PR;
1180                 htinfo_update(ic);
1181         }
1182 }
1183
1184 /* unalligned little endian access */     
1185 #define LE_READ_2(p)                                    \
1186         ((uint16_t)                                     \
1187          ((((const uint8_t *)(p))[0]      ) |           \
1188           (((const uint8_t *)(p))[1] <<  8)))
1189
1190 /*
1191  * Process an 802.11n HT capabilities ie.
1192  */
1193 void
1194 ieee80211_parse_htcap(struct ieee80211_node *ni, const uint8_t *ie)
1195 {
1196         if (ie[0] == IEEE80211_ELEMID_VENDOR) {
1197                 /*
1198                  * Station used Vendor OUI ie to associate;
1199                  * mark the node so when we respond we'll use
1200                  * the Vendor OUI's and not the standard ie's.
1201                  */
1202                 ni->ni_flags |= IEEE80211_NODE_HTCOMPAT;
1203                 ie += 4;
1204         } else
1205                 ni->ni_flags &= ~IEEE80211_NODE_HTCOMPAT;
1206
1207         ni->ni_htcap = LE_READ_2(ie +
1208                 __offsetof(struct ieee80211_ie_htcap, hc_cap));
1209         ni->ni_htparam = ie[__offsetof(struct ieee80211_ie_htcap, hc_param)];
1210 }
1211
1212 static void
1213 htinfo_parse(struct ieee80211_node *ni,
1214         const struct ieee80211_ie_htinfo *htinfo)
1215 {
1216         uint16_t w;
1217
1218         ni->ni_htctlchan = htinfo->hi_ctrlchannel;
1219         ni->ni_ht2ndchan = SM(htinfo->hi_byte1, IEEE80211_HTINFO_2NDCHAN);
1220         w = LE_READ_2(&htinfo->hi_byte2);
1221         ni->ni_htopmode = SM(w, IEEE80211_HTINFO_OPMODE);
1222         w = LE_READ_2(&htinfo->hi_byte45);
1223         ni->ni_htstbc = SM(w, IEEE80211_HTINFO_BASIC_STBCMCS);
1224 }
1225
1226 /*
1227  * Parse an 802.11n HT info ie and save useful information
1228  * to the node state.  Note this does not effect any state
1229  * changes such as for channel width change.
1230  */
1231 void
1232 ieee80211_parse_htinfo(struct ieee80211_node *ni, const uint8_t *ie)
1233 {
1234         if (ie[0] == IEEE80211_ELEMID_VENDOR)
1235                 ie += 4;
1236         htinfo_parse(ni, (const struct ieee80211_ie_htinfo *) ie);
1237 }
1238
1239 /*
1240  * Handle 11n channel switch.  Use the received HT ie's to
1241  * identify the right channel to use.  If we cannot locate it
1242  * in the channel table then fallback to legacy operation.
1243  * Note that we use this information to identify the node's
1244  * channel only; the caller is responsible for insuring any
1245  * required channel change is done (e.g. in sta mode when
1246  * parsing the contents of a beacon frame).
1247  */
1248 static void
1249 htinfo_update_chw(struct ieee80211_node *ni, int htflags)
1250 {
1251         struct ieee80211com *ic = ni->ni_ic;
1252         struct ieee80211_channel *c;
1253         int chanflags;
1254
1255         chanflags = (ni->ni_chan->ic_flags &~ IEEE80211_CHAN_HT) | htflags;
1256         if (chanflags != ni->ni_chan->ic_flags) {
1257                 /* XXX not right for ht40- */
1258                 c = ieee80211_find_channel(ic, ni->ni_chan->ic_freq, chanflags);
1259                 if (c == NULL && (htflags & IEEE80211_CHAN_HT40)) {
1260                         /*
1261                          * No HT40 channel entry in our table; fall back
1262                          * to HT20 operation.  This should not happen.
1263                          */
1264                         c = findhtchan(ic, ni->ni_chan, IEEE80211_CHAN_HT20);
1265 #if 0
1266                         IEEE80211_NOTE(ni->ni_vap,
1267                             IEEE80211_MSG_ASSOC | IEEE80211_MSG_11N, ni,
1268                             "no HT40 channel (freq %u), falling back to HT20",
1269                             ni->ni_chan->ic_freq);
1270 #endif
1271                         /* XXX stat */
1272                 }
1273                 if (c != NULL && c != ni->ni_chan) {
1274                         IEEE80211_NOTE(ni->ni_vap,
1275                             IEEE80211_MSG_ASSOC | IEEE80211_MSG_11N, ni,
1276                             "switch station to HT%d channel %u/0x%x",
1277                             IEEE80211_IS_CHAN_HT40(c) ? 40 : 20,
1278                             c->ic_freq, c->ic_flags);
1279                         ni->ni_chan = c;
1280                 }
1281                 /* NB: caller responsible for forcing any channel change */
1282         }
1283         /* update node's tx channel width */
1284         ni->ni_chw = IEEE80211_IS_CHAN_HT40(ni->ni_chan)? 40 : 20;
1285 }
1286
1287 /*
1288  * Update 11n MIMO PS state according to received htcap.
1289  */
1290 static __inline int
1291 htcap_update_mimo_ps(struct ieee80211_node *ni)
1292 {
1293         uint16_t oflags = ni->ni_flags;
1294
1295         switch (ni->ni_htcap & IEEE80211_HTCAP_SMPS) {
1296         case IEEE80211_HTCAP_SMPS_DYNAMIC:
1297                 ni->ni_flags |= IEEE80211_NODE_MIMO_PS;
1298                 ni->ni_flags |= IEEE80211_NODE_MIMO_RTS;
1299                 break;
1300         case IEEE80211_HTCAP_SMPS_ENA:
1301                 ni->ni_flags |= IEEE80211_NODE_MIMO_PS;
1302                 ni->ni_flags &= ~IEEE80211_NODE_MIMO_RTS;
1303                 break;
1304         case IEEE80211_HTCAP_SMPS_OFF:
1305         default:                /* disable on rx of reserved value */
1306                 ni->ni_flags &= ~IEEE80211_NODE_MIMO_PS;
1307                 ni->ni_flags &= ~IEEE80211_NODE_MIMO_RTS;
1308                 break;
1309         }
1310         return (oflags ^ ni->ni_flags);
1311 }
1312
1313 /*
1314  * Update short GI state according to received htcap
1315  * and local settings.
1316  */
1317 static __inline void
1318 htcap_update_shortgi(struct ieee80211_node *ni)
1319 {
1320         struct ieee80211vap *vap = ni->ni_vap;
1321
1322         ni->ni_flags &= ~(IEEE80211_NODE_SGI20|IEEE80211_NODE_SGI40);
1323         if ((ni->ni_htcap & IEEE80211_HTCAP_SHORTGI20) &&
1324             (vap->iv_flags_ht & IEEE80211_FHT_SHORTGI20))
1325                 ni->ni_flags |= IEEE80211_NODE_SGI20;
1326         if ((ni->ni_htcap & IEEE80211_HTCAP_SHORTGI40) &&
1327             (vap->iv_flags_ht & IEEE80211_FHT_SHORTGI40))
1328                 ni->ni_flags |= IEEE80211_NODE_SGI40;
1329 }
1330
1331 /*
1332  * Parse and update HT-related state extracted from
1333  * the HT cap and info ie's.
1334  */
1335 void
1336 ieee80211_ht_updateparams(struct ieee80211_node *ni,
1337         const uint8_t *htcapie, const uint8_t *htinfoie)
1338 {
1339         struct ieee80211vap *vap = ni->ni_vap;
1340         const struct ieee80211_ie_htinfo *htinfo;
1341         int htflags;
1342
1343         ieee80211_parse_htcap(ni, htcapie);
1344         if (vap->iv_htcaps & IEEE80211_HTCAP_SMPS)
1345                 htcap_update_mimo_ps(ni);
1346         htcap_update_shortgi(ni);
1347
1348         if (htinfoie[0] == IEEE80211_ELEMID_VENDOR)
1349                 htinfoie += 4;
1350         htinfo = (const struct ieee80211_ie_htinfo *) htinfoie;
1351         htinfo_parse(ni, htinfo);
1352
1353         htflags = (vap->iv_flags_ht & IEEE80211_FHT_HT) ?
1354             IEEE80211_CHAN_HT20 : 0;
1355         /* NB: honor operating mode constraint */
1356         if ((htinfo->hi_byte1 & IEEE80211_HTINFO_TXWIDTH_2040) &&
1357             (vap->iv_flags_ht & IEEE80211_FHT_USEHT40)) {
1358                 if (ni->ni_ht2ndchan == IEEE80211_HTINFO_2NDCHAN_ABOVE)
1359                         htflags = IEEE80211_CHAN_HT40U;
1360                 else if (ni->ni_ht2ndchan == IEEE80211_HTINFO_2NDCHAN_BELOW)
1361                         htflags = IEEE80211_CHAN_HT40D;
1362         }
1363         htinfo_update_chw(ni, htflags);
1364
1365         if ((htinfo->hi_byte1 & IEEE80211_HTINFO_RIFSMODE_PERM) &&
1366             (vap->iv_flags_ht & IEEE80211_FHT_RIFS))
1367                 ni->ni_flags |= IEEE80211_NODE_RIFS;
1368         else
1369                 ni->ni_flags &= ~IEEE80211_NODE_RIFS;
1370 }
1371
1372 /*
1373  * Parse and update HT-related state extracted from the HT cap ie
1374  * for a station joining an HT BSS.
1375  */
1376 void
1377 ieee80211_ht_updatehtcap(struct ieee80211_node *ni, const uint8_t *htcapie)
1378 {
1379         struct ieee80211vap *vap = ni->ni_vap;
1380         int htflags;
1381
1382         ieee80211_parse_htcap(ni, htcapie);
1383         if (vap->iv_htcaps & IEEE80211_HTCAP_SMPS)
1384                 htcap_update_mimo_ps(ni);
1385         htcap_update_shortgi(ni);
1386
1387         /* NB: honor operating mode constraint */
1388         /* XXX 40 MHZ intolerant */
1389         htflags = (vap->iv_flags_ht & IEEE80211_FHT_HT) ?
1390             IEEE80211_CHAN_HT20 : 0;
1391         if ((ni->ni_htcap & IEEE80211_HTCAP_CHWIDTH40) &&
1392             (vap->iv_flags_ht & IEEE80211_FHT_USEHT40)) {
1393                 if (IEEE80211_IS_CHAN_HT40U(vap->iv_bss->ni_chan))
1394                         htflags = IEEE80211_CHAN_HT40U;
1395                 else if (IEEE80211_IS_CHAN_HT40D(vap->iv_bss->ni_chan))
1396                         htflags = IEEE80211_CHAN_HT40D;
1397         }
1398         htinfo_update_chw(ni, htflags);
1399 }
1400
1401 /*
1402  * Install received HT rate set by parsing the HT cap ie.
1403  */
1404 int
1405 ieee80211_setup_htrates(struct ieee80211_node *ni, const uint8_t *ie, int flags)
1406 {
1407         struct ieee80211vap *vap = ni->ni_vap;
1408         const struct ieee80211_ie_htcap *htcap;
1409         struct ieee80211_htrateset *rs;
1410         int i;
1411
1412         rs = &ni->ni_htrates;
1413         memset(rs, 0, sizeof(*rs));
1414         if (ie != NULL) {
1415                 if (ie[0] == IEEE80211_ELEMID_VENDOR)
1416                         ie += 4;
1417                 htcap = (const struct ieee80211_ie_htcap *) ie;
1418                 for (i = 0; i < IEEE80211_HTRATE_MAXSIZE; i++) {
1419                         if (isclr(htcap->hc_mcsset, i))
1420                                 continue;
1421                         if (rs->rs_nrates == IEEE80211_HTRATE_MAXSIZE) {
1422                                 IEEE80211_NOTE(vap,
1423                                     IEEE80211_MSG_XRATE | IEEE80211_MSG_11N, ni,
1424                                     "WARNING, HT rate set too large; only "
1425                                     "using %u rates", IEEE80211_HTRATE_MAXSIZE);
1426                                 vap->iv_stats.is_rx_rstoobig++;
1427                                 break;
1428                         }
1429                         rs->rs_rates[rs->rs_nrates++] = i;
1430                 }
1431         }
1432         return ieee80211_fix_rate(ni, (struct ieee80211_rateset *) rs, flags);
1433 }
1434
1435 /*
1436  * Mark rates in a node's HT rate set as basic according
1437  * to the information in the supplied HT info ie.
1438  */
1439 void
1440 ieee80211_setup_basic_htrates(struct ieee80211_node *ni, const uint8_t *ie)
1441 {
1442         const struct ieee80211_ie_htinfo *htinfo;
1443         struct ieee80211_htrateset *rs;
1444         int i, j;
1445
1446         if (ie[0] == IEEE80211_ELEMID_VENDOR)
1447                 ie += 4;
1448         htinfo = (const struct ieee80211_ie_htinfo *) ie;
1449         rs = &ni->ni_htrates;
1450         if (rs->rs_nrates == 0) {
1451                 IEEE80211_NOTE(ni->ni_vap,
1452                     IEEE80211_MSG_XRATE | IEEE80211_MSG_11N, ni,
1453                     "%s", "WARNING, empty HT rate set");
1454                 return;
1455         }
1456         for (i = 0; i < IEEE80211_HTRATE_MAXSIZE; i++) {
1457                 if (isclr(htinfo->hi_basicmcsset, i))
1458                         continue;
1459                 for (j = 0; j < rs->rs_nrates; j++)
1460                         if ((rs->rs_rates[j] & IEEE80211_RATE_VAL) == i)
1461                                 rs->rs_rates[j] |= IEEE80211_RATE_BASIC;
1462         }
1463 }
1464
1465 static void
1466 ampdu_tx_setup(struct ieee80211_tx_ampdu *tap)
1467 {
1468         callout_init_mp(&tap->txa_timer);
1469         tap->txa_flags |= IEEE80211_AGGR_SETUP;
1470 }
1471
1472 static void
1473 ampdu_tx_stop(struct ieee80211_tx_ampdu *tap)
1474 {
1475         struct ieee80211_node *ni = tap->txa_ni;
1476         struct ieee80211com *ic = ni->ni_ic;
1477
1478         KASSERT(tap->txa_flags & IEEE80211_AGGR_SETUP,
1479             ("txa_flags 0x%x ac %d", tap->txa_flags, tap->txa_ac));
1480
1481         /*
1482          * Stop BA stream if setup so driver has a chance
1483          * to reclaim any resources it might have allocated.
1484          */
1485         ic->ic_addba_stop(ni, tap);
1486         /*
1487          * Stop any pending BAR transmit.
1488          */
1489         bar_stop_timer(tap);
1490
1491         tap->txa_lastsample = 0;
1492         tap->txa_avgpps = 0;
1493         /* NB: clearing NAK means we may re-send ADDBA */ 
1494         tap->txa_flags &= ~(IEEE80211_AGGR_SETUP | IEEE80211_AGGR_NAK);
1495 }
1496
1497 static void
1498 addba_timeout_callout(void *arg)
1499 {
1500         struct ieee80211_tx_ampdu *tap = arg;
1501
1502         wlan_serialize_enter();
1503         /* XXX ? */
1504         tap->txa_flags &= ~IEEE80211_AGGR_XCHGPEND;
1505         tap->txa_attempts++;
1506         wlan_serialize_exit();
1507 }
1508
1509 static void
1510 addba_start_timeout(struct ieee80211_tx_ampdu *tap)
1511 {
1512         /* XXX use CALLOUT_PENDING instead? */
1513         callout_reset(&tap->txa_timer, ieee80211_addba_timeout,
1514                         addba_timeout_callout, tap);
1515         tap->txa_flags |= IEEE80211_AGGR_XCHGPEND;
1516         tap->txa_nextrequest = ticks + ieee80211_addba_timeout;
1517 }
1518
1519 static void
1520 addba_stop_timeout(struct ieee80211_tx_ampdu *tap)
1521 {
1522         /* XXX use CALLOUT_PENDING instead? */
1523         if (tap->txa_flags & IEEE80211_AGGR_XCHGPEND) {
1524                 callout_stop(&tap->txa_timer);
1525                 tap->txa_flags &= ~IEEE80211_AGGR_XCHGPEND;
1526         }
1527 }
1528
1529 /*
1530  * Default method for requesting A-MPDU tx aggregation.
1531  * We setup the specified state block and start a timer
1532  * to wait for an ADDBA response frame.
1533  */
1534 static int
1535 ieee80211_addba_request(struct ieee80211_node *ni,
1536         struct ieee80211_tx_ampdu *tap,
1537         int dialogtoken, int baparamset, int batimeout)
1538 {
1539         int bufsiz;
1540
1541         /* XXX locking */
1542         tap->txa_token = dialogtoken;
1543         tap->txa_flags |= IEEE80211_AGGR_IMMEDIATE;
1544         bufsiz = MS(baparamset, IEEE80211_BAPS_BUFSIZ);
1545         tap->txa_wnd = (bufsiz == 0) ?
1546             IEEE80211_AGGR_BAWMAX : min(bufsiz, IEEE80211_AGGR_BAWMAX);
1547         addba_start_timeout(tap);
1548         return 1;
1549 }
1550
1551 /*
1552  * Default method for processing an A-MPDU tx aggregation
1553  * response.  We shutdown any pending timer and update the
1554  * state block according to the reply.
1555  */
1556 static int
1557 ieee80211_addba_response(struct ieee80211_node *ni,
1558         struct ieee80211_tx_ampdu *tap,
1559         int status, int baparamset, int batimeout)
1560 {
1561         int bufsiz;
1562 #if 0
1563         int tid;
1564 #endif
1565         /* XXX locking */
1566         addba_stop_timeout(tap);
1567         if (status == IEEE80211_STATUS_SUCCESS) {
1568                 bufsiz = MS(baparamset, IEEE80211_BAPS_BUFSIZ);
1569                 /* XXX override our request? */
1570                 tap->txa_wnd = (bufsiz == 0) ?
1571                     IEEE80211_AGGR_BAWMAX : min(bufsiz, IEEE80211_AGGR_BAWMAX);
1572                 /* XXX AC/TID */
1573 #if 0
1574                 tid = MS(baparamset, IEEE80211_BAPS_TID);
1575 #endif
1576                 tap->txa_flags |= IEEE80211_AGGR_RUNNING;
1577                 tap->txa_attempts = 0;
1578         } else {
1579                 /* mark tid so we don't try again */
1580                 tap->txa_flags |= IEEE80211_AGGR_NAK;
1581         }
1582         return 1;
1583 }
1584
1585 /*
1586  * Default method for stopping A-MPDU tx aggregation.
1587  * Any timer is cleared and we drain any pending frames.
1588  */
1589 static void
1590 ieee80211_addba_stop(struct ieee80211_node *ni, struct ieee80211_tx_ampdu *tap)
1591 {
1592         /* XXX locking */
1593         addba_stop_timeout(tap);
1594         if (tap->txa_flags & IEEE80211_AGGR_RUNNING) {
1595                 /* XXX clear aggregation queue */
1596                 tap->txa_flags &= ~IEEE80211_AGGR_RUNNING;
1597         }
1598         tap->txa_attempts = 0;
1599 }
1600
1601 /*
1602  * Process a received action frame using the default aggregation
1603  * policy.  We intercept ADDBA-related frames and use them to
1604  * update our aggregation state.  All other frames are passed up
1605  * for processing by ieee80211_recv_action.
1606  */
1607 static int
1608 ht_recv_action_ba_addba_request(struct ieee80211_node *ni,
1609         const struct ieee80211_frame *wh,
1610         const uint8_t *frm, const uint8_t *efrm)
1611 {
1612         struct ieee80211com *ic = ni->ni_ic;
1613         struct ieee80211vap *vap = ni->ni_vap;
1614         struct ieee80211_rx_ampdu *rap;
1615         uint8_t dialogtoken;
1616         uint16_t baparamset, batimeout, baseqctl;
1617         uint16_t args[4];
1618         int tid;
1619
1620         dialogtoken = frm[2];
1621         baparamset = LE_READ_2(frm+3);
1622         batimeout = LE_READ_2(frm+5);
1623         baseqctl = LE_READ_2(frm+7);
1624
1625         tid = MS(baparamset, IEEE80211_BAPS_TID);
1626
1627         IEEE80211_NOTE(vap, IEEE80211_MSG_ACTION | IEEE80211_MSG_11N, ni,
1628             "recv ADDBA request: dialogtoken %u baparamset 0x%x "
1629             "(tid %d bufsiz %d) batimeout %d baseqctl %d:%d",
1630             dialogtoken, baparamset,
1631             tid, MS(baparamset, IEEE80211_BAPS_BUFSIZ),
1632             batimeout,
1633             MS(baseqctl, IEEE80211_BASEQ_START),
1634             MS(baseqctl, IEEE80211_BASEQ_FRAG));
1635
1636         rap = &ni->ni_rx_ampdu[tid];
1637
1638         /* Send ADDBA response */
1639         args[0] = dialogtoken;
1640         /*
1641          * NB: We ack only if the sta associated with HT and
1642          * the ap is configured to do AMPDU rx (the latter
1643          * violates the 11n spec and is mostly for testing).
1644          */
1645         if ((ni->ni_flags & IEEE80211_NODE_AMPDU_RX) &&
1646             (vap->iv_flags_ht & IEEE80211_FHT_AMPDU_RX)) {
1647                 /* XXX handle ampdu_rx_start failure */
1648                 ic->ic_ampdu_rx_start(ni, rap,
1649                     baparamset, batimeout, baseqctl);
1650
1651                 args[1] = IEEE80211_STATUS_SUCCESS;
1652         } else {
1653                 IEEE80211_NOTE(vap, IEEE80211_MSG_ACTION | IEEE80211_MSG_11N,
1654                     ni, "reject ADDBA request: %s",
1655                     ni->ni_flags & IEEE80211_NODE_AMPDU_RX ?
1656                        "administratively disabled" :
1657                        "not negotiated for station");
1658                 vap->iv_stats.is_addba_reject++;
1659                 args[1] = IEEE80211_STATUS_UNSPECIFIED;
1660         }
1661         /* XXX honor rap flags? */
1662         args[2] = IEEE80211_BAPS_POLICY_IMMEDIATE
1663                 | SM(tid, IEEE80211_BAPS_TID)
1664                 | SM(rap->rxa_wnd, IEEE80211_BAPS_BUFSIZ)
1665                 ;
1666         args[3] = 0;
1667         ic->ic_send_action(ni, IEEE80211_ACTION_CAT_BA,
1668                 IEEE80211_ACTION_BA_ADDBA_RESPONSE, args);
1669         return 0;
1670 }
1671
1672 static int
1673 ht_recv_action_ba_addba_response(struct ieee80211_node *ni,
1674         const struct ieee80211_frame *wh,
1675         const uint8_t *frm, const uint8_t *efrm)
1676 {
1677         struct ieee80211com *ic = ni->ni_ic;
1678         struct ieee80211vap *vap = ni->ni_vap;
1679         struct ieee80211_tx_ampdu *tap;
1680         uint8_t dialogtoken, policy;
1681         uint16_t baparamset, batimeout, code;
1682         int tid, ac, bufsiz;
1683
1684         dialogtoken = frm[2];
1685         code = LE_READ_2(frm+3);
1686         baparamset = LE_READ_2(frm+5);
1687         tid = MS(baparamset, IEEE80211_BAPS_TID);
1688         bufsiz = MS(baparamset, IEEE80211_BAPS_BUFSIZ);
1689         policy = MS(baparamset, IEEE80211_BAPS_POLICY);
1690         batimeout = LE_READ_2(frm+7);
1691
1692         ac = TID_TO_WME_AC(tid);
1693         tap = &ni->ni_tx_ampdu[ac];
1694         if ((tap->txa_flags & IEEE80211_AGGR_XCHGPEND) == 0) {
1695                 IEEE80211_DISCARD_MAC(vap,
1696                     IEEE80211_MSG_ACTION | IEEE80211_MSG_11N,
1697                     ni->ni_macaddr, "ADDBA response",
1698                     "no pending ADDBA, tid %d dialogtoken %u "
1699                     "code %d", tid, dialogtoken, code);
1700                 vap->iv_stats.is_addba_norequest++;
1701                 return 0;
1702         }
1703         if (dialogtoken != tap->txa_token) {
1704                 IEEE80211_DISCARD_MAC(vap,
1705                     IEEE80211_MSG_ACTION | IEEE80211_MSG_11N,
1706                     ni->ni_macaddr, "ADDBA response",
1707                     "dialogtoken mismatch: waiting for %d, "
1708                     "received %d, tid %d code %d",
1709                     tap->txa_token, dialogtoken, tid, code);
1710                 vap->iv_stats.is_addba_badtoken++;
1711                 return 0;
1712         }
1713         /* NB: assumes IEEE80211_AGGR_IMMEDIATE is 1 */
1714         if (policy != (tap->txa_flags & IEEE80211_AGGR_IMMEDIATE)) {
1715                 IEEE80211_DISCARD_MAC(vap,
1716                     IEEE80211_MSG_ACTION | IEEE80211_MSG_11N,
1717                     ni->ni_macaddr, "ADDBA response",
1718                     "policy mismatch: expecting %d, "
1719                     "received %d, tid %d code %d",
1720                     tap->txa_flags & IEEE80211_AGGR_IMMEDIATE,
1721                     policy, tid, code);
1722                 vap->iv_stats.is_addba_badpolicy++;
1723                 return 0;
1724         }
1725 #if 0
1726         /* XXX we take MIN in ieee80211_addba_response */
1727         if (bufsiz > IEEE80211_AGGR_BAWMAX) {
1728                 IEEE80211_DISCARD_MAC(vap,
1729                     IEEE80211_MSG_ACTION | IEEE80211_MSG_11N,
1730                     ni->ni_macaddr, "ADDBA response",
1731                     "BA window too large: max %d, "
1732                     "received %d, tid %d code %d",
1733                     bufsiz, IEEE80211_AGGR_BAWMAX, tid, code);
1734                 vap->iv_stats.is_addba_badbawinsize++;
1735                 return 0;
1736         }
1737 #endif
1738         IEEE80211_NOTE(vap, IEEE80211_MSG_ACTION | IEEE80211_MSG_11N, ni,
1739             "recv ADDBA response: dialogtoken %u code %d "
1740             "baparamset 0x%x (tid %d bufsiz %d) batimeout %d",
1741             dialogtoken, code, baparamset, tid, bufsiz,
1742             batimeout);
1743         ic->ic_addba_response(ni, tap, code, baparamset, batimeout);
1744         return 0;
1745 }
1746
1747 static int
1748 ht_recv_action_ba_delba(struct ieee80211_node *ni,
1749         const struct ieee80211_frame *wh,
1750         const uint8_t *frm, const uint8_t *efrm)
1751 {
1752         struct ieee80211com *ic = ni->ni_ic;
1753         struct ieee80211_rx_ampdu *rap;
1754         struct ieee80211_tx_ampdu *tap;
1755         uint16_t baparamset, code;
1756         int tid, ac;
1757
1758         baparamset = LE_READ_2(frm+2);
1759         code = LE_READ_2(frm+4);
1760
1761         tid = MS(baparamset, IEEE80211_DELBAPS_TID);
1762
1763         IEEE80211_NOTE(ni->ni_vap, IEEE80211_MSG_ACTION | IEEE80211_MSG_11N, ni,
1764             "recv DELBA: baparamset 0x%x (tid %d initiator %d) "
1765             "code %d", baparamset, tid,
1766             MS(baparamset, IEEE80211_DELBAPS_INIT), code);
1767
1768         if ((baparamset & IEEE80211_DELBAPS_INIT) == 0) {
1769                 ac = TID_TO_WME_AC(tid);
1770                 tap = &ni->ni_tx_ampdu[ac];
1771                 ic->ic_addba_stop(ni, tap);
1772         } else {
1773                 rap = &ni->ni_rx_ampdu[tid];
1774                 ic->ic_ampdu_rx_stop(ni, rap);
1775         }
1776         return 0;
1777 }
1778
1779 static int
1780 ht_recv_action_ht_txchwidth(struct ieee80211_node *ni,
1781         const struct ieee80211_frame *wh,
1782         const uint8_t *frm, const uint8_t *efrm)
1783 {
1784         int chw;
1785
1786         chw = (frm[2] == IEEE80211_A_HT_TXCHWIDTH_2040) ? 40 : 20;
1787
1788         IEEE80211_NOTE(ni->ni_vap, IEEE80211_MSG_ACTION | IEEE80211_MSG_11N, ni,
1789             "%s: HT txchwidth, width %d%s",
1790             __func__, chw, ni->ni_chw != chw ? "*" : "");
1791         if (chw != ni->ni_chw) {
1792                 ni->ni_chw = chw;
1793                 /* XXX notify on change */
1794         }
1795         return 0;
1796 }
1797
1798 static int
1799 ht_recv_action_ht_mimopwrsave(struct ieee80211_node *ni,
1800         const struct ieee80211_frame *wh,
1801         const uint8_t *frm, const uint8_t *efrm)
1802 {
1803         const struct ieee80211_action_ht_mimopowersave *mps =
1804             (const struct ieee80211_action_ht_mimopowersave *) frm;
1805
1806         /* XXX check iv_htcaps */
1807         if (mps->am_control & IEEE80211_A_HT_MIMOPWRSAVE_ENA)
1808                 ni->ni_flags |= IEEE80211_NODE_MIMO_PS;
1809         else
1810                 ni->ni_flags &= ~IEEE80211_NODE_MIMO_PS;
1811         if (mps->am_control & IEEE80211_A_HT_MIMOPWRSAVE_MODE)
1812                 ni->ni_flags |= IEEE80211_NODE_MIMO_RTS;
1813         else
1814                 ni->ni_flags &= ~IEEE80211_NODE_MIMO_RTS;
1815         /* XXX notify on change */
1816         IEEE80211_NOTE(ni->ni_vap, IEEE80211_MSG_ACTION | IEEE80211_MSG_11N, ni,
1817             "%s: HT MIMO PS (%s%s)", __func__,
1818             (ni->ni_flags & IEEE80211_NODE_MIMO_PS) ?  "on" : "off",
1819             (ni->ni_flags & IEEE80211_NODE_MIMO_RTS) ?  "+rts" : ""
1820         );
1821         return 0;
1822 }
1823
1824 /*
1825  * Transmit processing.
1826  */
1827
1828 /*
1829  * Check if A-MPDU should be requested/enabled for a stream.
1830  * We require a traffic rate above a per-AC threshold and we
1831  * also handle backoff from previous failed attempts.
1832  *
1833  * Drivers may override this method to bring in information
1834  * such as link state conditions in making the decision.
1835  */
1836 static int
1837 ieee80211_ampdu_enable(struct ieee80211_node *ni,
1838         struct ieee80211_tx_ampdu *tap)
1839 {
1840         struct ieee80211vap *vap = ni->ni_vap;
1841
1842         if (tap->txa_avgpps < vap->iv_ampdu_mintraffic[tap->txa_ac])
1843                 return 0;
1844         /* XXX check rssi? */
1845         if (tap->txa_attempts >= ieee80211_addba_maxtries &&
1846             ticks < tap->txa_nextrequest) {
1847                 /*
1848                  * Don't retry too often; txa_nextrequest is set
1849                  * to the minimum interval we'll retry after
1850                  * ieee80211_addba_maxtries failed attempts are made.
1851                  */
1852                 return 0;
1853         }
1854         IEEE80211_NOTE(vap, IEEE80211_MSG_11N, ni,
1855             "enable AMPDU on %s, avgpps %d pkts %d",
1856             ieee80211_wme_acnames[tap->txa_ac], tap->txa_avgpps, tap->txa_pkts);
1857         return 1;
1858 }
1859
1860 /*
1861  * Request A-MPDU tx aggregation.  Setup local state and
1862  * issue an ADDBA request.  BA use will only happen after
1863  * the other end replies with ADDBA response.
1864  */
1865 int
1866 ieee80211_ampdu_request(struct ieee80211_node *ni,
1867         struct ieee80211_tx_ampdu *tap)
1868 {
1869         struct ieee80211com *ic = ni->ni_ic;
1870         uint16_t args[4];
1871         int tid, dialogtoken;
1872         static int tokens = 0;  /* XXX */
1873
1874         /* XXX locking */
1875         if ((tap->txa_flags & IEEE80211_AGGR_SETUP) == 0) {
1876                 /* do deferred setup of state */
1877                 ampdu_tx_setup(tap);
1878         }
1879         /* XXX hack for not doing proper locking */
1880         tap->txa_flags &= ~IEEE80211_AGGR_NAK;
1881
1882         dialogtoken = (tokens+1) % 63;          /* XXX */
1883         tid = WME_AC_TO_TID(tap->txa_ac);
1884         tap->txa_start = ni->ni_txseqs[tid];
1885
1886         args[0] = dialogtoken;
1887         args[1] = IEEE80211_BAPS_POLICY_IMMEDIATE
1888                 | SM(tid, IEEE80211_BAPS_TID)
1889                 | SM(IEEE80211_AGGR_BAWMAX, IEEE80211_BAPS_BUFSIZ)
1890                 ;
1891         args[2] = 0;    /* batimeout */
1892         /* NB: do first so there's no race against reply */
1893         if (!ic->ic_addba_request(ni, tap, dialogtoken, args[1], args[2])) {
1894                 /* unable to setup state, don't make request */
1895                 IEEE80211_NOTE(ni->ni_vap, IEEE80211_MSG_11N,
1896                     ni, "%s: could not setup BA stream for AC %d",
1897                     __func__, tap->txa_ac);
1898                 /* defer next try so we don't slam the driver with requests */
1899                 tap->txa_attempts = ieee80211_addba_maxtries;
1900                 /* NB: check in case driver wants to override */
1901                 if (tap->txa_nextrequest <= ticks)
1902                         tap->txa_nextrequest = ticks + ieee80211_addba_backoff;
1903                 return 0;
1904         }
1905         tokens = dialogtoken;                   /* allocate token */
1906         /* NB: after calling ic_addba_request so driver can set txa_start */
1907         args[3] = SM(tap->txa_start, IEEE80211_BASEQ_START)
1908                 | SM(0, IEEE80211_BASEQ_FRAG)
1909                 ;
1910         return ic->ic_send_action(ni, IEEE80211_ACTION_CAT_BA,
1911                 IEEE80211_ACTION_BA_ADDBA_REQUEST, args);
1912 }
1913
1914 /*
1915  * Terminate an AMPDU tx stream.  State is reclaimed
1916  * and the peer notified with a DelBA Action frame.
1917  */
1918 void
1919 ieee80211_ampdu_stop(struct ieee80211_node *ni, struct ieee80211_tx_ampdu *tap,
1920         int reason)
1921 {
1922         struct ieee80211com *ic = ni->ni_ic;
1923         struct ieee80211vap *vap = ni->ni_vap;
1924         uint16_t args[4];
1925
1926         /* XXX locking */
1927         tap->txa_flags &= ~IEEE80211_AGGR_BARPEND;
1928         if (IEEE80211_AMPDU_RUNNING(tap)) {
1929                 IEEE80211_NOTE(vap, IEEE80211_MSG_ACTION | IEEE80211_MSG_11N,
1930                     ni, "%s: stop BA stream for AC %d (reason %d)",
1931                     __func__, tap->txa_ac, reason);
1932                 vap->iv_stats.is_ampdu_stop++;
1933
1934                 ic->ic_addba_stop(ni, tap);
1935                 args[0] = WME_AC_TO_TID(tap->txa_ac);
1936                 args[1] = IEEE80211_DELBAPS_INIT;
1937                 args[2] = reason;                       /* XXX reason code */
1938                 ic->ic_send_action(ni, IEEE80211_ACTION_CAT_BA,
1939                         IEEE80211_ACTION_BA_DELBA, args);
1940         } else {
1941                 IEEE80211_NOTE(vap, IEEE80211_MSG_ACTION | IEEE80211_MSG_11N,
1942                     ni, "%s: BA stream for AC %d not running (reason %d)",
1943                     __func__, tap->txa_ac, reason);
1944                 vap->iv_stats.is_ampdu_stop_failed++;
1945         }
1946 }
1947
1948 static void
1949 bar_timeout_callout(void *arg)
1950 {
1951         struct ieee80211_tx_ampdu *tap = arg;
1952         struct ieee80211_node *ni;
1953
1954         wlan_serialize_enter();
1955         ni = tap->txa_ni;
1956         KASSERT((tap->txa_flags & IEEE80211_AGGR_XCHGPEND) == 0,
1957             ("bar/addba collision, flags 0x%x", tap->txa_flags));
1958
1959         IEEE80211_NOTE(ni->ni_vap, IEEE80211_MSG_11N,
1960             ni, "%s: tid %u flags 0x%x attempts %d", __func__,
1961             tap->txa_ac, tap->txa_flags, tap->txa_attempts);
1962
1963         /* guard against race with bar_tx_complete */
1964         if (tap->txa_flags & IEEE80211_AGGR_BARPEND) {
1965                 /* XXX ? */
1966                 if (tap->txa_attempts >= ieee80211_bar_maxtries)
1967                         ieee80211_ampdu_stop(ni, tap, IEEE80211_REASON_TIMEOUT);
1968                 else
1969                         ieee80211_send_bar(ni, tap, tap->txa_seqpending);
1970         }
1971         wlan_serialize_exit();
1972 }
1973
1974 static void
1975 bar_start_timer(struct ieee80211_tx_ampdu *tap)
1976 {
1977         callout_reset(&tap->txa_timer, ieee80211_bar_timeout,
1978                         bar_timeout_callout, tap);
1979 }
1980
1981 static void
1982 bar_stop_timer(struct ieee80211_tx_ampdu *tap)
1983 {
1984         callout_stop(&tap->txa_timer);
1985 }
1986
1987 static void
1988 bar_tx_complete(struct ieee80211_node *ni, void *arg, int status)
1989 {
1990         struct ieee80211_tx_ampdu *tap = arg;
1991
1992         IEEE80211_NOTE(ni->ni_vap, IEEE80211_MSG_11N,
1993             ni, "%s: tid %u flags 0x%x pending %d status %d",
1994             __func__, tap->txa_ac, tap->txa_flags,
1995             callout_pending(&tap->txa_timer), status);
1996
1997         /* XXX locking */
1998         if ((tap->txa_flags & IEEE80211_AGGR_BARPEND) &&
1999             callout_pending(&tap->txa_timer)) {
2000                 struct ieee80211com *ic = ni->ni_ic;
2001
2002                 if (status)             /* ACK'd */
2003                         bar_stop_timer(tap);
2004                 ic->ic_bar_response(ni, tap, status);
2005                 /* NB: just let timer expire so we pace requests */
2006         }
2007 }
2008
2009 static void
2010 ieee80211_bar_response(struct ieee80211_node *ni,
2011         struct ieee80211_tx_ampdu *tap, int status)
2012 {
2013
2014         if (status != 0) {              /* got ACK */
2015                 IEEE80211_NOTE(ni->ni_vap, IEEE80211_MSG_11N,
2016                     ni, "BAR moves BA win <%u:%u> (%u frames) txseq %u tid %u",
2017                     tap->txa_start,
2018                     IEEE80211_SEQ_ADD(tap->txa_start, tap->txa_wnd-1),
2019                     tap->txa_qframes, tap->txa_seqpending,
2020                     WME_AC_TO_TID(tap->txa_ac));
2021
2022                 /* NB: timer already stopped in bar_tx_complete */
2023                 tap->txa_start = tap->txa_seqpending;
2024                 tap->txa_flags &= ~IEEE80211_AGGR_BARPEND;
2025         }
2026 }
2027
2028 /*
2029  * Transmit a BAR frame to the specified node.  The
2030  * BAR contents are drawn from the supplied aggregation
2031  * state associated with the node.
2032  *
2033  * NB: we only handle immediate ACK w/ compressed bitmap.
2034  */
2035 int
2036 ieee80211_send_bar(struct ieee80211_node *ni,
2037         struct ieee80211_tx_ampdu *tap, ieee80211_seq seq)
2038 {
2039 #define senderr(_x, _v) do { vap->iv_stats._v++; ret = _x; goto bad; } while (0)
2040         struct ieee80211vap *vap = ni->ni_vap;
2041         struct ieee80211com *ic = ni->ni_ic;
2042         struct ieee80211_frame_bar *bar;
2043         struct mbuf *m;
2044         uint16_t barctl, barseqctl;
2045         uint8_t *frm;
2046         int tid, ret;
2047
2048         if ((tap->txa_flags & IEEE80211_AGGR_RUNNING) == 0) {
2049                 /* no ADDBA response, should not happen */
2050                 /* XXX stat+msg */
2051                 return EINVAL;
2052         }
2053         /* XXX locking */
2054         bar_stop_timer(tap);
2055
2056         ieee80211_ref_node(ni);
2057
2058         m = ieee80211_getmgtframe(&frm, ic->ic_headroom, sizeof(*bar));
2059         if (m == NULL)
2060                 senderr(ENOMEM, is_tx_nobuf);
2061
2062         if (!ieee80211_add_callback(m, bar_tx_complete, tap)) {
2063                 m_freem(m);
2064                 senderr(ENOMEM, is_tx_nobuf);   /* XXX */
2065                 /* NOTREACHED */
2066         }
2067
2068         bar = mtod(m, struct ieee80211_frame_bar *);
2069         bar->i_fc[0] = IEEE80211_FC0_VERSION_0 |
2070                 IEEE80211_FC0_TYPE_CTL | IEEE80211_FC0_SUBTYPE_BAR;
2071         bar->i_fc[1] = 0;
2072         IEEE80211_ADDR_COPY(bar->i_ra, ni->ni_macaddr);
2073         IEEE80211_ADDR_COPY(bar->i_ta, vap->iv_myaddr);
2074
2075         tid = WME_AC_TO_TID(tap->txa_ac);
2076         barctl  = (tap->txa_flags & IEEE80211_AGGR_IMMEDIATE ?
2077                         0 : IEEE80211_BAR_NOACK)
2078                 | IEEE80211_BAR_COMP
2079                 | SM(tid, IEEE80211_BAR_TID)
2080                 ;
2081         barseqctl = SM(seq, IEEE80211_BAR_SEQ_START);
2082         /* NB: known to have proper alignment */
2083         bar->i_ctl = htole16(barctl);
2084         bar->i_seq = htole16(barseqctl);
2085         m->m_pkthdr.len = m->m_len = sizeof(struct ieee80211_frame_bar);
2086
2087         M_WME_SETAC(m, WME_AC_VO);
2088
2089         IEEE80211_NODE_STAT(ni, tx_mgmt);       /* XXX tx_ctl? */
2090
2091         /* XXX locking */
2092         /* init/bump attempts counter */
2093         if ((tap->txa_flags & IEEE80211_AGGR_BARPEND) == 0)
2094                 tap->txa_attempts = 1;
2095         else
2096                 tap->txa_attempts++;
2097         tap->txa_seqpending = seq;
2098         tap->txa_flags |= IEEE80211_AGGR_BARPEND;
2099
2100         IEEE80211_NOTE(vap, IEEE80211_MSG_DEBUG | IEEE80211_MSG_11N,
2101             ni, "send BAR: tid %u ctl 0x%x start %u (attempt %d)",
2102             tid, barctl, seq, tap->txa_attempts);
2103
2104         ret = ic->ic_raw_xmit(ni, m, NULL);
2105         if (ret != 0) {
2106                 /* xmit failed, clear state flag */
2107                 tap->txa_flags &= ~IEEE80211_AGGR_BARPEND;
2108                 goto bad;
2109         }
2110         /* XXX hack against tx complete happening before timer is started */
2111         if (tap->txa_flags & IEEE80211_AGGR_BARPEND)
2112                 bar_start_timer(tap);
2113         return 0;
2114 bad:
2115         ieee80211_free_node(ni);
2116         return ret;
2117 #undef senderr
2118 }
2119
2120 static int
2121 ht_action_output(struct ieee80211_node *ni, struct mbuf *m)
2122 {
2123         struct ieee80211_bpf_params params;
2124
2125         memset(&params, 0, sizeof(params));
2126         params.ibp_pri = WME_AC_VO;
2127         params.ibp_rate0 = ni->ni_txparms->mgmtrate;
2128         /* NB: we know all frames are unicast */
2129         params.ibp_try0 = ni->ni_txparms->maxretry;
2130         params.ibp_power = ni->ni_txpower;
2131         return ieee80211_mgmt_output(ni, m, IEEE80211_FC0_SUBTYPE_ACTION,
2132              &params);
2133 }
2134
2135 #define ADDSHORT(frm, v) do {                   \
2136         frm[0] = (v) & 0xff;                    \
2137         frm[1] = (v) >> 8;                      \
2138         frm += 2;                               \
2139 } while (0)
2140
2141 /*
2142  * Send an action management frame.  The arguments are stuff
2143  * into a frame without inspection; the caller is assumed to
2144  * prepare them carefully (e.g. based on the aggregation state).
2145  */
2146 static int
2147 ht_send_action_ba_addba(struct ieee80211_node *ni,
2148         int category, int action, void *arg0)
2149 {
2150         struct ieee80211vap *vap = ni->ni_vap;
2151         struct ieee80211com *ic = ni->ni_ic;
2152         uint16_t *args = arg0;
2153         struct mbuf *m;
2154         uint8_t *frm;
2155 #ifdef IEEE80211_DEBUG
2156         char ethstr[ETHER_ADDRSTRLEN + 1];
2157 #endif
2158
2159         IEEE80211_NOTE(vap, IEEE80211_MSG_ACTION | IEEE80211_MSG_11N, ni,
2160             "send ADDBA %s: dialogtoken %d "
2161             "baparamset 0x%x (tid %d) batimeout 0x%x baseqctl 0x%x",
2162             (action == IEEE80211_ACTION_BA_ADDBA_REQUEST) ?
2163                 "request" : "response",
2164             args[0], args[1], MS(args[1], IEEE80211_BAPS_TID),
2165             args[2], args[3]);
2166
2167         IEEE80211_DPRINTF(vap, IEEE80211_MSG_NODE,
2168             "ieee80211_ref_node (%s:%u) %p<%s> refcnt %d\n", __func__, __LINE__,
2169             ni, kether_ntoa(ni->ni_macaddr, ethstr), ieee80211_node_refcnt(ni)+1);
2170         ieee80211_ref_node(ni);
2171
2172         m = ieee80211_getmgtframe(&frm,
2173             ic->ic_headroom + sizeof(struct ieee80211_frame),
2174             sizeof(uint16_t)    /* action+category */
2175             /* XXX may action payload */
2176             + sizeof(struct ieee80211_action_ba_addbaresponse)
2177         );
2178         if (m != NULL) {
2179                 *frm++ = category;
2180                 *frm++ = action;
2181                 *frm++ = args[0];               /* dialog token */
2182                 ADDSHORT(frm, args[1]);         /* baparamset */
2183                 ADDSHORT(frm, args[2]);         /* batimeout */
2184                 if (action == IEEE80211_ACTION_BA_ADDBA_REQUEST)
2185                         ADDSHORT(frm, args[3]); /* baseqctl */
2186                 m->m_pkthdr.len = m->m_len = frm - mtod(m, uint8_t *);
2187                 return ht_action_output(ni, m);
2188         } else {
2189                 vap->iv_stats.is_tx_nobuf++;
2190                 ieee80211_free_node(ni);
2191                 return ENOMEM;
2192         }
2193 }
2194
2195 static int
2196 ht_send_action_ba_delba(struct ieee80211_node *ni,
2197         int category, int action, void *arg0)
2198 {
2199         struct ieee80211vap *vap = ni->ni_vap;
2200         struct ieee80211com *ic = ni->ni_ic;
2201         uint16_t *args = arg0;
2202         struct mbuf *m;
2203         uint16_t baparamset;
2204         uint8_t *frm;
2205 #ifdef IEEE80211_DEBUG
2206         char ethstr[ETHER_ADDRSTRLEN + 1];
2207 #endif
2208
2209         baparamset = SM(args[0], IEEE80211_DELBAPS_TID)
2210                    | args[1]
2211                    ;
2212         IEEE80211_NOTE(vap, IEEE80211_MSG_ACTION | IEEE80211_MSG_11N, ni,
2213             "send DELBA action: tid %d, initiator %d reason %d",
2214             args[0], args[1], args[2]);
2215
2216         IEEE80211_DPRINTF(vap, IEEE80211_MSG_NODE,
2217             "ieee80211_ref_node (%s:%u) %p<%s> refcnt %d\n", __func__, __LINE__,
2218             ni, kether_ntoa(ni->ni_macaddr, ethstr), ieee80211_node_refcnt(ni)+1);
2219         ieee80211_ref_node(ni);
2220
2221         m = ieee80211_getmgtframe(&frm,
2222             ic->ic_headroom + sizeof(struct ieee80211_frame),
2223             sizeof(uint16_t)    /* action+category */
2224             /* XXX may action payload */
2225             + sizeof(struct ieee80211_action_ba_addbaresponse)
2226         );
2227         if (m != NULL) {
2228                 *frm++ = category;
2229                 *frm++ = action;
2230                 ADDSHORT(frm, baparamset);
2231                 ADDSHORT(frm, args[2]);         /* reason code */
2232                 m->m_pkthdr.len = m->m_len = frm - mtod(m, uint8_t *);
2233                 return ht_action_output(ni, m);
2234         } else {
2235                 vap->iv_stats.is_tx_nobuf++;
2236                 ieee80211_free_node(ni);
2237                 return ENOMEM;
2238         }
2239 }
2240
2241 static int
2242 ht_send_action_ht_txchwidth(struct ieee80211_node *ni,
2243         int category, int action, void *arg0)
2244 {
2245         struct ieee80211vap *vap = ni->ni_vap;
2246         struct ieee80211com *ic = ni->ni_ic;
2247         struct mbuf *m;
2248         uint8_t *frm;
2249 #ifdef IEEE80211_DEBUG
2250         char ethstr[ETHER_ADDRSTRLEN + 1];
2251 #endif
2252
2253         IEEE80211_NOTE(vap, IEEE80211_MSG_ACTION | IEEE80211_MSG_11N, ni,
2254             "send HT txchwidth: width %d",
2255             IEEE80211_IS_CHAN_HT40(ni->ni_chan) ? 40 : 20);
2256
2257         IEEE80211_DPRINTF(vap, IEEE80211_MSG_NODE,
2258             "ieee80211_ref_node (%s:%u) %p<%s> refcnt %d\n", __func__, __LINE__,
2259             ni, kether_ntoa(ni->ni_macaddr, ethstr), ieee80211_node_refcnt(ni)+1);
2260         ieee80211_ref_node(ni);
2261
2262         m = ieee80211_getmgtframe(&frm,
2263             ic->ic_headroom + sizeof(struct ieee80211_frame),
2264             sizeof(uint16_t)    /* action+category */
2265             /* XXX may action payload */
2266             + sizeof(struct ieee80211_action_ba_addbaresponse)
2267         );
2268         if (m != NULL) {
2269                 *frm++ = category;
2270                 *frm++ = action;
2271                 *frm++ = IEEE80211_IS_CHAN_HT40(ni->ni_chan) ? 
2272                         IEEE80211_A_HT_TXCHWIDTH_2040 :
2273                         IEEE80211_A_HT_TXCHWIDTH_20;
2274                 m->m_pkthdr.len = m->m_len = frm - mtod(m, uint8_t *);
2275                 return ht_action_output(ni, m);
2276         } else {
2277                 vap->iv_stats.is_tx_nobuf++;
2278                 ieee80211_free_node(ni);
2279                 return ENOMEM;
2280         }
2281 }
2282 #undef ADDSHORT
2283
2284 /*
2285  * Construct the MCS bit mask for inclusion
2286  * in an HT information element.
2287  */
2288 static void 
2289 ieee80211_set_htrates(uint8_t *frm, const struct ieee80211_htrateset *rs)
2290 {
2291         int i;
2292
2293         for (i = 0; i < rs->rs_nrates; i++) {
2294                 int r = rs->rs_rates[i] & IEEE80211_RATE_VAL;
2295                 if (r < IEEE80211_HTRATE_MAXSIZE) {     /* XXX? */
2296                         /* NB: this assumes a particular implementation */
2297                         setbit(frm, r);
2298                 }
2299         }
2300 }
2301
2302 /*
2303  * Add body of an HTCAP information element.
2304  */
2305 static uint8_t *
2306 ieee80211_add_htcap_body(uint8_t *frm, struct ieee80211_node *ni)
2307 {
2308 #define ADDSHORT(frm, v) do {                   \
2309         frm[0] = (v) & 0xff;                    \
2310         frm[1] = (v) >> 8;                      \
2311         frm += 2;                               \
2312 } while (0)
2313         struct ieee80211vap *vap = ni->ni_vap;
2314         uint16_t caps;
2315         int rxmax, density;
2316
2317         /* HT capabilities */
2318         caps = vap->iv_htcaps & 0xffff;
2319         /*
2320          * Note channel width depends on whether we are operating as
2321          * a sta or not.  When operating as a sta we are generating
2322          * a request based on our desired configuration.  Otherwise
2323          * we are operational and the channel attributes identify
2324          * how we've been setup (which might be different if a fixed
2325          * channel is specified).
2326          */
2327         if (vap->iv_opmode == IEEE80211_M_STA) {
2328                 /* override 20/40 use based on config */
2329                 if (vap->iv_flags_ht & IEEE80211_FHT_USEHT40)
2330                         caps |= IEEE80211_HTCAP_CHWIDTH40;
2331                 else
2332                         caps &= ~IEEE80211_HTCAP_CHWIDTH40;
2333                 /* use advertised setting (XXX locally constraint) */
2334                 rxmax = MS(ni->ni_htparam, IEEE80211_HTCAP_MAXRXAMPDU);
2335                 density = MS(ni->ni_htparam, IEEE80211_HTCAP_MPDUDENSITY);
2336         } else {
2337                 /* override 20/40 use based on current channel */
2338                 if (IEEE80211_IS_CHAN_HT40(ni->ni_chan))
2339                         caps |= IEEE80211_HTCAP_CHWIDTH40;
2340                 else
2341                         caps &= ~IEEE80211_HTCAP_CHWIDTH40;
2342                 rxmax = vap->iv_ampdu_rxmax;
2343                 density = vap->iv_ampdu_density;
2344         }
2345         /* adjust short GI based on channel and config */
2346         if ((vap->iv_flags_ht & IEEE80211_FHT_SHORTGI20) == 0)
2347                 caps &= ~IEEE80211_HTCAP_SHORTGI20;
2348         if ((vap->iv_flags_ht & IEEE80211_FHT_SHORTGI40) == 0 ||
2349             (caps & IEEE80211_HTCAP_CHWIDTH40) == 0)
2350                 caps &= ~IEEE80211_HTCAP_SHORTGI40;
2351         ADDSHORT(frm, caps);
2352
2353         /* HT parameters */
2354         *frm = SM(rxmax, IEEE80211_HTCAP_MAXRXAMPDU)
2355              | SM(density, IEEE80211_HTCAP_MPDUDENSITY)
2356              ;
2357         frm++;
2358
2359         /* pre-zero remainder of ie */
2360         memset(frm, 0, sizeof(struct ieee80211_ie_htcap) - 
2361                 __offsetof(struct ieee80211_ie_htcap, hc_mcsset));
2362
2363         /* supported MCS set */
2364         /*
2365          * XXX it would better to get the rate set from ni_htrates
2366          * so we can restrict it but for sta mode ni_htrates isn't
2367          * setup when we're called to form an AssocReq frame so for
2368          * now we're restricted to the default HT rate set.
2369          */
2370         ieee80211_set_htrates(frm, &ieee80211_rateset_11n);
2371
2372         frm += sizeof(struct ieee80211_ie_htcap) -
2373                 __offsetof(struct ieee80211_ie_htcap, hc_mcsset);
2374         return frm;
2375 #undef ADDSHORT
2376 }
2377
2378 /*
2379  * Add 802.11n HT capabilities information element
2380  */
2381 uint8_t *
2382 ieee80211_add_htcap(uint8_t *frm, struct ieee80211_node *ni)
2383 {
2384         frm[0] = IEEE80211_ELEMID_HTCAP;
2385         frm[1] = sizeof(struct ieee80211_ie_htcap) - 2;
2386         return ieee80211_add_htcap_body(frm + 2, ni);
2387 }
2388
2389 /*
2390  * Add Broadcom OUI wrapped standard HTCAP ie; this is
2391  * used for compatibility w/ pre-draft implementations.
2392  */
2393 uint8_t *
2394 ieee80211_add_htcap_vendor(uint8_t *frm, struct ieee80211_node *ni)
2395 {
2396         frm[0] = IEEE80211_ELEMID_VENDOR;
2397         frm[1] = 4 + sizeof(struct ieee80211_ie_htcap) - 2;
2398         frm[2] = (BCM_OUI >> 0) & 0xff;
2399         frm[3] = (BCM_OUI >> 8) & 0xff;
2400         frm[4] = (BCM_OUI >> 16) & 0xff;
2401         frm[5] = BCM_OUI_HTCAP;
2402         return ieee80211_add_htcap_body(frm + 6, ni);
2403 }
2404
2405 /*
2406  * Construct the MCS bit mask of basic rates
2407  * for inclusion in an HT information element.
2408  */
2409 static void
2410 ieee80211_set_basic_htrates(uint8_t *frm, const struct ieee80211_htrateset *rs)
2411 {
2412         int i;
2413
2414         for (i = 0; i < rs->rs_nrates; i++) {
2415                 int r = rs->rs_rates[i] & IEEE80211_RATE_VAL;
2416                 if ((rs->rs_rates[i] & IEEE80211_RATE_BASIC) &&
2417                     r < IEEE80211_HTRATE_MAXSIZE) {
2418                         /* NB: this assumes a particular implementation */
2419                         setbit(frm, r);
2420                 }
2421         }
2422 }
2423
2424 /*
2425  * Update the HTINFO ie for a beacon frame.
2426  */
2427 void
2428 ieee80211_ht_update_beacon(struct ieee80211vap *vap,
2429         struct ieee80211_beacon_offsets *bo)
2430 {
2431 #define PROTMODE        (IEEE80211_HTINFO_OPMODE|IEEE80211_HTINFO_NONHT_PRESENT)
2432         const struct ieee80211_channel *bsschan = vap->iv_bss->ni_chan;
2433         struct ieee80211com *ic = vap->iv_ic;
2434         struct ieee80211_ie_htinfo *ht =
2435            (struct ieee80211_ie_htinfo *) bo->bo_htinfo;
2436
2437         /* XXX only update on channel change */
2438         ht->hi_ctrlchannel = ieee80211_chan2ieee(ic, bsschan);
2439         if (vap->iv_flags_ht & IEEE80211_FHT_RIFS)
2440                 ht->hi_byte1 = IEEE80211_HTINFO_RIFSMODE_PERM;
2441         else
2442                 ht->hi_byte1 = IEEE80211_HTINFO_RIFSMODE_PROH;
2443         if (IEEE80211_IS_CHAN_HT40U(bsschan))
2444                 ht->hi_byte1 |= IEEE80211_HTINFO_2NDCHAN_ABOVE;
2445         else if (IEEE80211_IS_CHAN_HT40D(bsschan))
2446                 ht->hi_byte1 |= IEEE80211_HTINFO_2NDCHAN_BELOW;
2447         else
2448                 ht->hi_byte1 |= IEEE80211_HTINFO_2NDCHAN_NONE;
2449         if (IEEE80211_IS_CHAN_HT40(bsschan))
2450                 ht->hi_byte1 |= IEEE80211_HTINFO_TXWIDTH_2040;
2451
2452         /* protection mode */
2453         ht->hi_byte2 = (ht->hi_byte2 &~ PROTMODE) | ic->ic_curhtprotmode;
2454
2455         /* XXX propagate to vendor ie's */
2456 #undef PROTMODE
2457 }
2458
2459 /*
2460  * Add body of an HTINFO information element.
2461  *
2462  * NB: We don't use struct ieee80211_ie_htinfo because we can
2463  * be called to fillin both a standard ie and a compat ie that
2464  * has a vendor OUI at the front.
2465  */
2466 static uint8_t *
2467 ieee80211_add_htinfo_body(uint8_t *frm, struct ieee80211_node *ni)
2468 {
2469         struct ieee80211vap *vap = ni->ni_vap;
2470         struct ieee80211com *ic = ni->ni_ic;
2471
2472         /* pre-zero remainder of ie */
2473         memset(frm, 0, sizeof(struct ieee80211_ie_htinfo) - 2);
2474
2475         /* primary/control channel center */
2476         *frm++ = ieee80211_chan2ieee(ic, ni->ni_chan);
2477
2478         if (vap->iv_flags_ht & IEEE80211_FHT_RIFS)
2479                 frm[0] = IEEE80211_HTINFO_RIFSMODE_PERM;
2480         else
2481                 frm[0] = IEEE80211_HTINFO_RIFSMODE_PROH;
2482         if (IEEE80211_IS_CHAN_HT40U(ni->ni_chan))
2483                 frm[0] |= IEEE80211_HTINFO_2NDCHAN_ABOVE;
2484         else if (IEEE80211_IS_CHAN_HT40D(ni->ni_chan))
2485                 frm[0] |= IEEE80211_HTINFO_2NDCHAN_BELOW;
2486         else
2487                 frm[0] |= IEEE80211_HTINFO_2NDCHAN_NONE;
2488         if (IEEE80211_IS_CHAN_HT40(ni->ni_chan))
2489                 frm[0] |= IEEE80211_HTINFO_TXWIDTH_2040;
2490
2491         frm[1] = ic->ic_curhtprotmode;
2492
2493         frm += 5;
2494
2495         /* basic MCS set */
2496         ieee80211_set_basic_htrates(frm, &ni->ni_htrates);
2497         frm += sizeof(struct ieee80211_ie_htinfo) -
2498                 __offsetof(struct ieee80211_ie_htinfo, hi_basicmcsset);
2499         return frm;
2500 }
2501
2502 /*
2503  * Add 802.11n HT information information element.
2504  */
2505 uint8_t *
2506 ieee80211_add_htinfo(uint8_t *frm, struct ieee80211_node *ni)
2507 {
2508         frm[0] = IEEE80211_ELEMID_HTINFO;
2509         frm[1] = sizeof(struct ieee80211_ie_htinfo) - 2;
2510         return ieee80211_add_htinfo_body(frm + 2, ni);
2511 }
2512
2513 /*
2514  * Add Broadcom OUI wrapped standard HTINFO ie; this is
2515  * used for compatibility w/ pre-draft implementations.
2516  */
2517 uint8_t *
2518 ieee80211_add_htinfo_vendor(uint8_t *frm, struct ieee80211_node *ni)
2519 {
2520         frm[0] = IEEE80211_ELEMID_VENDOR;
2521         frm[1] = 4 + sizeof(struct ieee80211_ie_htinfo) - 2;
2522         frm[2] = (BCM_OUI >> 0) & 0xff;
2523         frm[3] = (BCM_OUI >> 8) & 0xff;
2524         frm[4] = (BCM_OUI >> 16) & 0xff;
2525         frm[5] = BCM_OUI_HTINFO;
2526         return ieee80211_add_htinfo_body(frm + 6, ni);
2527 }