Merge branch 'vendor/AWK'
[dragonfly.git] / sys / conf / options
1 # $FreeBSD: src/sys/conf/options,v 1.191.2.53 2003/06/04 17:56:58 sam Exp $
2 #
3 #        On the handling of kernel options
4 #
5 # All kernel options should be listed in LINT, with suitable
6 # descriptions.  Negative options (options that make some code not
7 # compile) should be commented out; LINT should compile as much code
8 # as possible.  Try to structure option-using code so that a single
9 # option only switch code on, or only switch code off, to make it
10 # possible to have a full compile-test.  If necessary, you can include
11 # "opt_lint.h" and check for COMPILING_LINT to get maximum code
12 # coverage.
13 #
14 # All new options shall also be listed in either "conf/options" or
15 # "platform/<platform>/conf/options".  Options that affect a single
16 # source-file <xxx>.[c|s] should be directed into "opt_<xxx>.h", while
17 # options that affect multiple files should either go in
18 # "opt_global.h" if this is a kernel-wide option (used just about
19 # everywhere), or in "opt_<option-name-in-lower-case>.h" if it affect
20 # only some files.  Note that the effect of listing only an option
21 # without a header-file-name in conf/options (and cousins) is that the
22 # last convention is followed.
23 #
24 # This handling scheme is not yet fully implemented.
25 #
26 #
27 # Format of this file:
28 # Option name   filename
29 #
30 # If filename is missing, the default is
31 # opt_<name-of-option-in-lower-case>.h
32
33 # Adaptec Array Controller driver options
34 AAC_DEBUG               opt_aac.h
35
36 # Adaptec aic7xxx SCSI controller options
37 AHC_ALLOW_MEMIO         opt_aic7xxx.h   # Allow PCI devices to use memory
38                                         # mapped I/O
39
40 AHC_TMODE_ENABLE        opt_aic7xxx.h   # Bitmap of units to enable
41                                         # targetmode operations.
42
43 AHC_DUMP_EEPROM         opt_aic7xxx.h   # Dump the contents of our
44                                         # configuration prom.
45
46 AHC_DEBUG               opt_aic7xxx.h   # Compile in Aic7xxx Debugging code.
47
48 AHC_DEBUG_OPTS          opt_aic7xxx.h   # Aic7xxx driver debugging options.
49                                         # See sys/dev/aic7xxx/aic7xxx.h
50
51 AHC_REG_PRETTY_PRINT    opt_aic7xxx.h   # Print register bitfields in debug
52                                         # output.  Adds ~15k to driver.
53
54 # Adaptec aic79xx SCSI controller options
55 AHD_DEBUG               opt_aic79xx.h   # Compile in Aic79xx Debugging code.
56
57 AHD_DEBUG_OPTS          opt_aic79xx.h   # Aic79xx driver debugging options.
58                                         # See sys/dev/aic7xxx/aic79xx.h
59
60 AHD_TMODE_ENABLE        opt_aic79xx.h   # Bitmap of units to enable
61                                         # targetmode operations.
62
63 AHD_REG_PRETTY_PRINT    opt_aic79xx.h   # Print register bitfields in debug
64                                         # output.  Adds ~15k to driver.
65
66 ADW_ALLOW_MEMIO         opt_adw.h       # Allow PCI devices to use memory
67                                         # mapped I/O
68 TWA_DEBUG               opt_twa.h
69
70 #options for ACPI support
71 ACPI_DEBUG              opt_acpi.h
72 ACPI_NO_SEMAPHORES      opt_acpi.h
73 ACPI_ENABLE_PCI         opt_acpi.h
74
75 # Miscellaneous options.
76 COMPAT_DF12     opt_compatdf12.h
77 COMPAT_43       opt_compat.h
78 COMPAT_SUNOS    opt_compat.h
79 COMPILING_LINT  opt_lint.h
80 DDB
81 DDB_TRACE
82 DDB_UNATTENDED  opt_ddb.h
83 GDB_REMOTE_CHAT opt_ddb.h
84 HW_WDOG
85 KTRACE
86 LIBICONV
87 MD_NSECT        opt_md.h
88 MD_ROOT         opt_md.h
89 MD_ROOT_SIZE    opt_md.h
90 MFI_DEBUG       opt_mfi.h
91 NSWAPDEV        opt_swap.h
92 NSWBUF_MIN      opt_swap.h
93 PPS_SYNC        opt_ntp.h
94 QUOTA
95 SUIDDIR         opt_suiddir.h
96 SYSVMSG         opt_sysvipc.h
97 SYSVSEM         opt_sysvipc.h
98 SYSVSHM         opt_sysvipc.h
99 SHMALL          opt_sysvipc.h
100 SHMMAX          opt_sysvipc.h
101 SHMMAXPGS       opt_sysvipc.h
102 SHMMIN          opt_sysvipc.h
103 SHMMNI          opt_sysvipc.h
104 SHMSEG          opt_sysvipc.h
105 SEMMAP          opt_sysvipc.h
106 SEMMNI          opt_sysvipc.h
107 SEMMNS          opt_sysvipc.h
108 SEMMNU          opt_sysvipc.h
109 SEMMSL          opt_sysvipc.h
110 SEMOPM          opt_sysvipc.h
111 SEMUME          opt_sysvipc.h
112 MSGMNB          opt_sysvipc.h
113 MSGMNI          opt_sysvipc.h
114 MSGSEG          opt_sysvipc.h
115 MSGSSZ          opt_sysvipc.h
116 MSGTQL          opt_sysvipc.h
117 UCONSOLE
118 ICMP_BANDLIM
119 SHOW_BUSYBUFS
120 DIRECTIO        opt_directio.h
121
122 # POSIX kernel options
123 P1003_1B                        opt_posix.h
124 _KPOSIX_PRIORITY_SCHEDULING     opt_posix.h
125 _KPOSIX_VERSION                 opt_posix.h
126
127 # Do we want the config file compiled into the kernel?
128 INCLUDE_CONFIG_FILE     opt_config.h
129
130 # Options for static file systems.  These should only be used at config
131 # time, since the corresponding lkms cannot work if there are any static
132 # dependencies.  Unusability is enforced by hiding the defines for the
133 # options in a never-included header.
134 EXT2FS          opt_dontuse.h
135 FDESC           opt_dontuse.h
136 HPFS            opt_dontuse.h
137 MFS             opt_dontuse.h
138 MSDOSFS         opt_dontuse.h
139 NULLFS          opt_dontuse.h
140 PORTAL          opt_dontuse.h
141 PROCFS          opt_dontuse.h
142 UDF             opt_dontuse.h
143 NTFS            opt_dontuse.h
144 #TMPFS          opt_dontuse.h
145
146 # These static filesystems has one slightly bogus static dependency in
147 # sys/platform/.../i386/autoconf.c.  If any of these filesystems are
148 # statically compiled into the kernel, code for mounting them as root
149 # filesystems will be enabled - but look below.  Boot-code is purposely
150 # unavailable for the LKM-based versions.
151 CD9660
152 FFS
153 NFS
154 NWFS
155 USERFS
156 TMPFS
157 HAMMER
158
159 # filesystems and libiconv bridge
160 CD9660_ICONV    opt_dontuse.h
161 MSDOSFS_ICONV   opt_dontuse.h
162 NTFS_ICONV      opt_dontuse.h
163
164 # If you are following the conditions in the copyright,
165 # you can enable soft-updates which will speed up a lot of things
166 # and make the system safer from crashes at the same time.
167 # otherwise a STUB module will be compiled in.
168 SOFTUPDATES     opt_ffs.h
169
170 # Enable fast hash lookups for large directories on UFS-based filesystems.
171 UFS_DIRHASH     opt_ufs.h
172
173 # The above static dependencies are planned removed, with a
174 # <filesystem>_ROOT option to control if it usable as root.  This list
175 # allows these options to be present in config files already (though
176 # they won't make any difference yet).
177 FFS_ROOT        opt_ffs.h
178 NFS_ROOT        opt_nfsroot.h
179
180 # The union static file system has bogus static dependencies, so it isn't
181 # hidden yet.
182 UNION
183
184 # Options used only in subr_param.c.
185 HZ              opt_param.h
186 MAXFILES        opt_param.h
187 NBUF            opt_param.h
188 NMBCLUSTERS     opt_param.h
189 NMBUFS          opt_param.h
190 VM_BCACHE_SIZE_MAX      opt_param.h
191 VM_SWZONE_SIZE_MAX      opt_param.h
192 MAXUSERS
193 DFLDSIZ         opt_param.h
194 MAXDSIZ         opt_param.h
195 MAXSSIZ         opt_param.h
196
197 # Generic SCSI options.
198 CAM_MAX_HIGHPOWER       opt_cam.h
199 CAMDEBUG                opt_cam.h
200 CAM_DEBUG_DELAY         opt_cam.h
201 CAM_DEBUG_BUS           opt_cam.h
202 CAM_DEBUG_TARGET        opt_cam.h
203 CAM_DEBUG_LUN           opt_cam.h
204 CAM_DEBUG_FLAGS         opt_cam.h
205 SCSI_DELAY              opt_scsi.h
206 SCSI_NO_SENSE_STRINGS   opt_scsi.h
207 SCSI_NO_OP_STRINGS      opt_scsi.h
208
209 # iSCSI options
210 ISCSI_INITIATOR_DEBUG   opt_iscsi_initiator.h
211
212 # Options used only in cam/scsi/scsi_cd.c
213 CHANGER_MIN_BUSY_SECONDS        opt_cd.h
214 CHANGER_MAX_BUSY_SECONDS        opt_cd.h
215
216 # Options used only in cam/scsi/scsi_sa.c.
217 SA_IO_TIMEOUT           opt_sa.h
218 SA_SPACE_TIMEOUT        opt_sa.h
219 SA_REWIND_TIMEOUT       opt_sa.h
220 SA_ERASE_TIMEOUT        opt_sa.h
221 SA_1FM_AT_EOD           opt_sa.h
222
223 # Options used only in cam/scsi/scsi_pt.c
224 SCSI_PT_DEFAULT_TIMEOUT opt_pt.h
225
226 # Options used only in cam/scsi/scsi_ses.c
227 SES_ENABLE_PASSTHROUGH  opt_ses.h
228
229 # Options used in dev/sym/ (Symbios SCSI driver).
230 SYM_SETUP_LP_PROBE_MAP  opt_sym.h       #-Low Priority Probe Map (bits)
231                                         # Allows the ncr to take precedence
232                                         # 1 (1<<0) -> 810a, 860
233                                         # 2 (1<<1) -> 825a, 875, 885, 895
234                                         # 4 (1<<2) -> 895a, 896, 1510d 
235 SYM_SETUP_SCSI_DIFF     opt_sym.h       #-HVD support for 825a, 875, 885
236                                         # disabled:0 (default), enabled:1
237 SYM_SETUP_PCI_PARITY    opt_sym.h       #-PCI parity checking
238                                         # disabled:0, enabled:1 (default)
239 SYM_SETUP_MAX_LUN       opt_sym.h       #-Number of LUNs supported
240                                         # default:8, range:[1..64]
241
242 # Options used only in pci/ncr.c
243 SCSI_NCR_DEBUG          opt_ncr.h
244 SCSI_NCR_MAX_SYNC       opt_ncr.h
245 SCSI_NCR_MAX_WIDE       opt_ncr.h
246 SCSI_NCR_MYADDR         opt_ncr.h
247
248 # Options used only in pci/isp_pci.c
249 ISP_TARGET_MODE         opt_isp.h
250
251 # Options used in the 'ata' ATA/ATAPI driver
252 ATA_STATIC_ID           opt_ata.h
253
254 # Net stuff.
255 # altq stuff
256 ALTQ                    opt_global.h
257 ALTQ_CBQ                opt_altq.h
258 ALTQ_RED                opt_altq.h
259 ALTQ_RIO                opt_altq.h
260 ALTQ_HFSC               opt_altq.h
261 ALTQ_PRIQ               opt_altq.h
262 ALTQ_FAIRQ              opt_altq.h
263 ALTQ_NOPCC              opt_altq.h
264 ALTQ_DEBUG              opt_altq.h
265
266 ACCEPT_FILTER_DATA
267 ACCEPT_FILTER_HTTP
268 BOOTP                   opt_bootp.h
269 BOOTP_COMPAT            opt_bootp.h
270 BOOTP_NFSROOT           opt_bootp.h
271 BOOTP_NFSV3             opt_bootp.h
272 BOOTP_WIRED_TO          opt_bootp.h
273 CARP                    opt_carp.h
274 ETHER_II                opt_ef.h
275 ETHER_8023              opt_ef.h
276 ETHER_8022              opt_ef.h
277 ETHER_SNAP              opt_ef.h
278 MROUTING                opt_mrouting.h
279 PIM                     opt_mrouting.h
280 INET                    opt_inet.h
281 INET6                   opt_inet6.h
282 IPSEC                   opt_ipsec.h
283 IPSEC_ESP               opt_ipsec.h
284 IPSEC_DEBUG             opt_ipsec.h
285 IPSEC_FILTERGIF         opt_ipsec.h
286 FAST_IPSEC              opt_ipsec.h
287 IPDIVERT
288 DUMMYNET                opt_ipdn.h
289 DUMMYNET_DEBUG          opt_ipdn.h
290 IPFIREWALL              opt_ipfw.h
291 IPFIREWALL_DEBUG        opt_ipfw.h
292 IPFIREWALL_VERBOSE      opt_ipfw.h
293 IPFIREWALL_VERBOSE_LIMIT        opt_ipfw.h
294 IPFIREWALL_DEFAULT_TO_ACCEPT    opt_ipfw.h
295 IPFIREWALL_FORWARD              opt_ipfw.h
296 IPV6FIREWALL            opt_ip6fw.h
297 IPV6FIREWALL_VERBOSE    opt_ip6fw.h
298 IPV6FIREWALL_VERBOSE_LIMIT      opt_ip6fw.h
299 IPV6FIREWALL_DEFAULT_TO_ACCEPT  opt_ip6fw.h
300 IPSTEALTH
301 IPX                     opt_ipx.h
302 IPXIP                   opt_ipx.h
303 IPTUNNEL                opt_ipx.h
304 LIBMCHAIN
305 MPLS                    opt_mpls.h
306 NCP                     opt_ncp.h
307 NETATALK                opt_atalk.h
308 PPP_BSDCOMP             opt_ppp.h
309 PPP_DEFLATE             opt_ppp.h
310 PPP_FILTER              opt_ppp.h
311 SLIP_IFF_OPTS           opt_slip.h
312 TCPDEBUG
313 TCP_SIGNATURE           opt_inet.h
314 TCP_DROP_SYNFIN         opt_tcp_input.h
315
316 XBONEHACK
317 MBUF_STRESS_TEST        opt_mbuf_stress_test.h
318
319 # (New netgraph, port still in progress)
320 #
321 # Netgraph(4). Use option NETGRAPH7 to enable the base netgraph code.
322 # Each netgraph node type can be either be compiled into the kernel
323 # or loaded dynamically. To get the former, include the corresponding
324 # option below. Each type has its own man page, e.g. ng_async(4).
325 NETGRAPH7
326 NETGRAPH7_DEBUG         opt_netgraph.h
327 NETGRAPH7_ASYNC         opt_netgraph.h
328 NETGRAPH7_ATMLLC        opt_netgraph.h
329 NETGRAPH7_ATM_ATMPIF    opt_netgraph.h
330 NETGRAPH7_BLUETOOTH             opt_netgraph.h
331 NETGRAPH7_BLUETOOTH_BT3C        opt_netgraph.h
332 NETGRAPH7_BLUETOOTH_H4          opt_netgraph.h
333 NETGRAPH7_BLUETOOTH_HCI         opt_netgraph.h
334 NETGRAPH7_BLUETOOTH_L2CAP       opt_netgraph.h
335 NETGRAPH7_BLUETOOTH_SOCKET      opt_netgraph.h
336 NETGRAPH7_BLUETOOTH_UBT         opt_netgraph.h
337 NETGRAPH7_BLUETOOTH_UBTBCMFW    opt_netgraph.h
338 NETGRAPH7_BPF           opt_netgraph.h
339 NETGRAPH7_BRIDGE        opt_netgraph.h
340 NETGRAPH7_CAR           opt_netgraph.h
341 NETGRAPH7_CISCO         opt_netgraph.h
342 NETGRAPH7_DEFLATE       opt_netgraph.h
343 NETGRAPH7_DEVICE        opt_netgraph.h
344 NETGRAPH7_ECHO          opt_netgraph.h
345 NETGRAPH7_EIFACE        opt_netgraph.h
346 NETGRAPH7_ETHER         opt_netgraph.h
347 NETGRAPH7_FEC           opt_netgraph.h
348 NETGRAPH7_FRAME_RELAY   opt_netgraph.h
349 NETGRAPH7_GIF           opt_netgraph.h
350 NETGRAPH7_GIF_DEMUX     opt_netgraph.h
351 NETGRAPH7_HOLE          opt_netgraph.h
352 NETGRAPH7_IFACE         opt_netgraph.h
353 NETGRAPH7_IP_INPUT      opt_netgraph.h
354 NETGRAPH7_IPFW          opt_netgraph.h
355 NETGRAPH7_KSOCKET       opt_netgraph.h
356 NETGRAPH7_L2TP          opt_netgraph.h
357 NETGRAPH7_LMI           opt_netgraph.h
358 # MPPC compression requires proprietary files (not included)
359 NETGRAPH7_MPPC_COMPRESSION      opt_netgraph.h
360 NETGRAPH7_MPPC_ENCRYPTION       opt_netgraph.h
361 NETGRAPH7_NAT           opt_netgraph.h
362 NETGRAPH7_NETFLOW       opt_netgraph.h
363 NETGRAPH7_ONE2MANY      opt_netgraph.h
364 NETGRAPH7_PPP           opt_netgraph.h
365 NETGRAPH7_PPPOE         opt_netgraph.h
366 NETGRAPH7_PPTPGRE       opt_netgraph.h
367 NETGRAPH7_PRED1         opt_netgraph.h
368 NETGRAPH7_RFC1490       opt_netgraph.h
369 NETGRAPH7_SOCKET        opt_netgraph.h
370 NETGRAPH7_SPLIT         opt_netgraph.h
371 NETGRAPH7_SPPP          opt_netgraph.h
372 NETGRAPH7_TAG           opt_netgraph.h
373 NETGRAPH7_TCPMSS        opt_netgraph.h
374 NETGRAPH7_TEE           opt_netgraph.h
375 NETGRAPH7_TTY           opt_netgraph.h
376 NETGRAPH7_UI            opt_netgraph.h
377 NETGRAPH7_VJC           opt_netgraph.h
378
379 # NgATM options
380 NGATM7_ATM              opt_netgraph.h
381 NGATM7_ATMBASE          opt_netgraph.h
382 NGATM7_SSCOP            opt_netgraph.h
383 NGATM7_SSCFU            opt_netgraph.h
384 NGATM7_UNI              opt_netgraph.h
385 NGATM7_CCATM            opt_netgraph.h
386
387 # Netgraph(4). Use option NETGRAPH to enable the base netgraph code.
388 # Each netgraph node type can be either be compiled into the kernel
389 # or loaded dynamically. To get the former, include the corresponding
390 # option below. Each type has its own man page, e.g. ng_async(8).
391 NETGRAPH
392 NETGRAPH_ASYNC          opt_netgraph.h
393 NETGRAPH_BPF            opt_netgraph.h
394 NETGRAPH_BRIDGE         opt_netgraph.h
395 NETGRAPH_CISCO          opt_netgraph.h
396 NETGRAPH_ECHO           opt_netgraph.h
397 NETGRAPH_EIFACE         opt_netgraph.h
398 NETGRAPH_ETHER          opt_netgraph.h
399 NETGRAPH_FRAME_RELAY    opt_netgraph.h
400 NETGRAPH_HOLE           opt_netgraph.h
401 NETGRAPH_IFACE          opt_netgraph.h
402 NETGRAPH_KSOCKET        opt_netgraph.h
403 NETGRAPH_LMI            opt_netgraph.h
404 NETGRAPH_L2TP           opt_netgraph.h
405 # MPPC compression requires proprietary files (not included)
406 NETGRAPH_MPPC_COMPRESSION       opt_netgraph.h
407 NETGRAPH_MPPC_ENCRYPTION        opt_netgraph.h
408 NETGRAPH_ONE2MANY       opt_netgraph.h
409 NETGRAPH_PPP            opt_netgraph.h
410 NETGRAPH_PPPOE          opt_netgraph.h
411 NETGRAPH_PPTPGRE        opt_netgraph.h
412 NETGRAPH_RFC1490        opt_netgraph.h
413 NETGRAPH_SOCKET         opt_netgraph.h
414 NETGRAPH_TEE            opt_netgraph.h
415 NETGRAPH_TTY            opt_netgraph.h
416 NETGRAPH_UI             opt_netgraph.h
417 NETGRAPH_VJC            opt_netgraph.h
418
419 # DRM options
420 DRM_DEBUG               opt_drm.h
421 DRM_LINUX               opt_drm.h
422
423 # ATM (HARP version)
424 ATM_CORE                opt_atm.h
425 ATM_IP                  opt_atm.h
426 ATM_SIGPVC              opt_atm.h
427 ATM_SPANS               opt_atm.h
428 ATM_UNI                 opt_atm.h
429
430 # XXX Conflict: # of devices vs network protocol (Native ATM).
431 # This makes "atm.h" unusable.
432 NATM                    opt_natm.h
433
434 # DPT driver debug flags
435 DPT_MEASURE_PERFORMANCE opt_dpt.h
436 DPT_HANDLE_TIMEOUTS     opt_dpt.h
437 DPT_TIMEOUT_FACTOR      opt_dpt.h
438 DPT_LOST_IRQ            opt_dpt.h
439 DPT_RESET_HBA           opt_dpt.h
440
441 # Misc debug flags.  Most of these should probably be replaced with
442 # 'DEBUG', and then let people recompile just the interesting modules
443 # with 'make CC="cc -DDEBUG"'.
444 CLUSTERDEBUG            opt_debug_cluster.h
445 DEBUG_1284              opt_ppb_1284.h
446 VP0_DEBUG               opt_vpo.h
447 LPT_DEBUG               opt_lpt.h
448 PLIP_DEBUG              opt_plip.h
449 LOCKF_DEBUG             opt_debug_lockf.h
450 LOUTB                   opt_debug_outb.h
451 NPX_DEBUG               opt_debug_npx.h
452 NETATALKDEBUG           opt_atalk.h
453 SI_DEBUG                opt_debug_si.h
454
455 # Fb options
456 FB_DEBUG                opt_fb.h
457 FB_INSTALL_CDEV         opt_fb.h
458
459 # ppbus related options
460 PERIPH_1284             opt_ppb_1284.h
461 DONTPROBE_1284          opt_ppb_1284.h
462
463 # smbus related options
464 ENABLE_ALART            opt_intpm.h
465
466 # These cause changes all over the kernel
467 BLKDEV_IOSIZE           opt_global.h
468 DEBUG                   opt_global.h
469 DEBUG_LOCKS             opt_global.h
470 DEBUG_CRIT_SECTIONS     opt_global.h
471 DIAGNOSTIC              opt_global.h
472 INVARIANTS              opt_global.h
473 VFS_BIO_DEBUG           opt_global.h
474 DEBUG_INTERRUPTS        opt_global.h
475 SOCKBUF_DEBUG           opt_global.h
476 PANIC_DEBUG             opt_global.h
477 MBUF_DEBUG              opt_global.h
478 PMAP_DEBUG              opt_global.h
479 VM_PAGE_DEBUG           opt_global.h
480 SLAB_DEBUG              opt_global.h
481
482 # Sample system/interrupt PC
483 DEBUG_PCTRACK           opt_pctrack.h
484
485 # These are VM related options
486 NO_SWAPPING             opt_vm.h
487 PQ_CACHESIZE            opt_vmpage.h
488
489 # Standard SMP options
490 SMP                     opt_global.h
491
492 # sys/netkey
493 KEY
494
495 # Size of the kernel message buffer
496 MSGBUF_SIZE             opt_msgbuf.h
497
498 # PCI related options
499 COMPAT_OLDPCI
500
501 # NFS options
502 NFS_MINATTRTIMO         opt_nfs.h
503 NFS_MAXATTRTIMO         opt_nfs.h
504 NFS_MINDIRATTRTIMO      opt_nfs.h
505 NFS_MAXDIRATTRTIMO      opt_nfs.h
506 NFS_GATHERDELAY         opt_nfs.h
507 NFS_UIDHASHSIZ          opt_nfs.h
508 NFS_WDELAYHASHSIZ       opt_nfs.h
509 NFS_MUIDHASHSIZ         opt_nfs.h
510 NFS_NOSERVER            opt_nfs.h
511 NFS_DEBUG               opt_nfs.h
512
513 # MSDOSFS options
514 MSDOSFS_DEBUG           opt_msdosfs.h
515
516 # For the Bt848/Bt848A/Bt849/Bt878/Bt879 driver
517 BROOKTREE_SYSTEM_DEFAULT        opt_bktr.h
518 BROOKTREE_ALLOC_PAGES           opt_bktr.h
519 BKTR_OVERRIDE_CARD              opt_bktr.h
520 BKTR_OVERRIDE_TUNER             opt_bktr.h
521 BKTR_OVERRIDE_DBX               opt_bktr.h
522 BKTR_OVERRIDE_MSP               opt_bktr.h
523 BKTR_SYSTEM_DEFAULT             opt_bktr.h
524 BKTR_ALLOC_PAGES                opt_bktr.h
525 BKTR_USE_PLL                    opt_bktr.h      
526 BKTR_GPIO_ACCESS                opt_bktr.h
527 BKTR_NO_MSP_RESET               opt_bktr.h
528 BKTR_430_FX_MODE                opt_bktr.h
529 BKTR_SIS_VIA_MODE               opt_bktr.h
530 BKTR_NEW_MSP34XX_DRIVER         opt_bktr.h
531
532 # Various mi ISA bus flags
533 COM_ESP                 opt_sio.h
534 COM_MULTIPORT           opt_sio.h
535 BREAK_TO_DEBUGGER       opt_comconsole.h
536 ALT_BREAK_TO_DEBUGGER   opt_comconsole.h
537
538 # options for bus/device framework
539 BUS_DEBUG               opt_bus.h
540
541 # options for USB support
542 OHCI_DEBUG              opt_usb.h
543 USB_DEBUG               opt_usb.h
544
545 # Vinum options
546 VINUMDEBUG              opt_vinum.h
547
548 # Embedded system options
549 UKBD_DFLT_KEYMAP        opt_ukbd.h
550 INIT_PATH               opt_init_path.h
551
552 ROOTDEVNAME             opt_rootdevname.h
553
554 FDC_DEBUG               opt_fdc.h
555 PCFCLOCK_VERBOSE        opt_pcfclock.h
556 PCFCLOCK_MAX_RETRIES    opt_pcfclock.h
557
558 # Polling device handling
559 DEVICE_POLLING          opt_polling.h
560
561 # Network device queue based polling
562 IFPOLL_ENABLE           opt_ifpoll.h
563
564 # options for ubsec driver
565 UBSEC_DEBUG             opt_ubsec.h
566 UBSEC_RNDTEST           opt_ubsec.h
567 UBSEC_NO_RNG            opt_ubsec.h
568
569 # options for hifn driver
570 HIFN_DEBUG              opt_hifn.h
571 HIFN_RNDTEST            opt_hifn.h
572 HIFN_NO_RNG             opt_hifn.h
573
574 # KTR options
575 KTR                             opt_global.h
576 KTR_ALL                         opt_ktr.h
577 KTR_TOKENS                      opt_ktr.h
578 KTR_MEMORY                      opt_ktr.h
579 KTR_USB_MEMORY                  opt_ktr.h
580 KTR_IPIQ                        opt_ktr.h
581 KTR_MSGPORT                     opt_ktr.h
582 KTR_ENTRIES                     opt_global.h
583 KTR_VERBOSE                     opt_ktr.h
584 KTR_SPIN_CONTENTION             opt_ktr.h
585 KTR_IF_BGE                      opt_ktr.h
586 KTR_IF_EM                       opt_ktr.h
587 KTR_IF_EMX                      opt_ktr.h
588 KTR_KERNENTRY                   opt_ktr.h
589 KTR_TESTLOG                     opt_ktr.h
590 KTR_SERIALIZER                  opt_ktr.h
591 KTR_POLLING                     opt_ktr.h
592 KTR_IFQ                         opt_ktr.h
593 KTR_IF_START                    opt_ktr.h
594 KTR_HAMMER                      opt_ktr.h
595 KTR_ETHERNET                    opt_ktr.h
596 KTR_CTXSW                       opt_ktr.h
597
598 # options for the Atheros driver
599 ATH_DEBUG               opt_ath.h
600 ATH_DIAGAPI             opt_ath.h
601 ATH_RXBUF               opt_ath.h
602 ATH_TXBUF               opt_ath.h
603
604 # ...and its HAL
605 AH_SUPPORT_AR5416       opt_ah.h
606
607 # bce driver
608 BCE_DEBUG               opt_bce.h
609 BCE_NVRAM_WRITE_SUPPORT opt_bce.h
610
611 # ed driver
612 ED_NO_MIIBUS            opt_ed.h
613
614 # emx driver
615 EMX_RSS_DEBUG           opt_emx.h
616
617 # jme driver
618 JME_RSS_DEBUG           opt_jme.h
619
620 # dcons options
621 DCONS_BUF_SIZE          opt_dcons.h
622 DCONS_POLL_HZ           opt_dcons.h
623 DCONS_FORCE_CONSOLE     opt_dcons.h
624 DCONS_FORCE_GDB         opt_dcons.h
625
626 # deprecated drivers and options
627 I_WANT_DEPRECATED_STUFF opt_deprecated.h
628
629 # SCTP
630 SCTP                    opt_sctp.h
631 SCTP_DEBUG              opt_sctp.h
632 SCTP_USE_ADLER32        opt_sctp.h
633 SCTP_HIGH_SPEED         opt_sctp.h
634 SCTP_STAT_LOGGING       opt_sctp.h
635 SCTP_CWND_LOGGING       opt_sctp.h
636 SCTP_BLK_LOGGING        opt_sctp.h
637 SCTP_STR_LOGGING        opt_sctp.h
638 SCTP_FR_LOGGING         opt_sctp.h
639 SCTP_MAP_LOGGING        opt_sctp.h
640
641 # syslink kernel support
642 #
643 SYSLINK                 opt_syslink.h
644
645 # DSCHED stuff
646 DSCHED_FQ               opt_dsched.h
647
648 # Receive Side Scaling (now basecode)
649 RSS_DEBUG               opt_rss.h
650
651 # Enable watchdogs
652 WATCHDOG_ENABLE opt_cpu.h
653
654 # Panic settings
655 WDOG_DISABLE_ON_PANIC   opt_panic.h
656 ERROR_LED_ON_PANIC      opt_panic.h
657
658 # 802.11 support layer
659 IEEE80211_DEBUG         opt_wlan.h
660 IEEE80211_DEBUG_REFCNT  opt_wlan.h
661 IEEE80211_AMPDU_AGE     opt_wlan.h
662 IEEE80211_SUPPORT_MESH  opt_wlan.h
663 IEEE80211_SUPPORT_SUPERG        opt_wlan.h
664 IEEE80211_SUPPORT_TDMA  opt_wlan.h
665
666 # 802.11 TDMA support
667 TDMA_SLOTLEN_DEFAULT    opt_tdma.h
668 TDMA_SLOTCNT_DEFAULT    opt_tdma.h
669 TDMA_BINTVAL_DEFAULT    opt_tdma.h
670 TDMA_TXRATE_11B_DEFAULT opt_tdma.h
671 TDMA_TXRATE_11G_DEFAULT opt_tdma.h
672 TDMA_TXRATE_11A_DEFAULT opt_tdma.h
673 TDMA_TXRATE_TURBO_DEFAULT       opt_tdma.h
674 TDMA_TXRATE_HALF_DEFAULT        opt_tdma.h
675 TDMA_TXRATE_QUARTER_DEFAULT     opt_tdma.h
676 TDMA_TXRATE_11NA_DEFAULT        opt_tdma.h
677 TDMA_TXRATE_11NG_DEFAULT        opt_tdma.h
678
679 PANIC_REBOOT_WAIT_TIME  opt_panic.h