sys/dev/netif/sk/if_sk.c

   1 /*      $OpenBSD: if_sk.c,v 1.33 2003/08/12 05:23:06 nate Exp $ */
   2
   3 /*
   4  * Copyright (c) 1997, 1998, 1999, 2000
   5  *      Bill Paul <wpaul@ctr.columbia.edu>.  All rights reserved.
   6  *
   7  * Redistribution and use in source and binary forms, with or without
   8  * modification, are permitted provided that the following conditions
   9  * are met:
  10  * 1. Redistributions of source code must retain the above copyright
  11  *    notice, this list of conditions and the following disclaimer.
  12  * 2. Redistributions in binary form must reproduce the above copyright
  13  *    notice, this list of conditions and the following disclaimer in the
  14  *    documentation and/or other materials provided with the distribution.
  15  * 3. All advertising materials mentioning features or use of this software
  16  *    must display the following acknowledgement:
  17  *      This product includes software developed by Bill Paul.
  18  * 4. Neither the name of the author nor the names of any co-contributors
  19  *    may be used to endorse or promote products derived from this software
  20  *    without specific prior written permission.
  21  *
  22  * THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND
  23  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
  24  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
  25  * ARE DISCLAIMED.  IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD
  26  * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
  27  * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
  28  * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
  29  * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
  30  * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
  31  * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
  32  * THE POSSIBILITY OF SUCH DAMAGE.
  33  *
  34  * $FreeBSD: src/sys/pci/if_sk.c,v 1.19.2.9 2003/03/05 18:42:34 njl Exp $
  35  * $DragonFly: src/sys/dev/netif/sk/if_sk.c,v 1.20 2004/09/23 23:18:01 dillon Exp $
  36  *
  37  * $FreeBSD: src/sys/pci/if_sk.c,v 1.19.2.9 2003/03/05 18:42:34 njl Exp $
  38  */
  39
  40 /*
  41  * Copyright (c) 2003 Nathan L. Binkert <binkertn@umich.edu>
  42  *
  43  * Permission to use, copy, modify, and distribute this software for any
  44  * purpose with or without fee is hereby granted, provided that the above
  45  * copyright notice and this permission notice appear in all copies.
  46  *
  47  * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
  48  * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
  49  * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
  50  * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
  51  * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
  52  * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
  53  * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
  54  */
  55
  56 /*
  57  * SysKonnect SK-NET gigabit ethernet driver for FreeBSD. Supports
  58  * the SK-984x series adapters, both single port and dual port.
  59  * References:
  60  *      The XaQti XMAC II datasheet,
  61  *  http://www.freebsd.org/~wpaul/SysKonnect/xmacii_datasheet_rev_c_9-29.pdf
  62  *      The SysKonnect GEnesis manual, http://www.syskonnect.com
  63  *
  64  * Note: XaQti has been aquired by Vitesse, and Vitesse does not have the
  65  * XMAC II datasheet online. I have put my copy at people.freebsd.org as a
  66  * convenience to others until Vitesse corrects this problem:
  67  *
  68  * http://people.freebsd.org/~wpaul/SysKonnect/xmacii_datasheet_rev_c_9-29.pdf
  69  *
  70  * Written by Bill Paul <wpaul@ee.columbia.edu>
  71  * Department of Electrical Engineering
  72  * Columbia University, New York City
  73  */
  74
  75 /*
  76  * The SysKonnect gigabit ethernet adapters consist of two main
  77  * components: the SysKonnect GEnesis controller chip and the XaQti Corp.
  78  * XMAC II gigabit ethernet MAC. The XMAC provides all of the MAC
  79  * components and a PHY while the GEnesis controller provides a PCI
  80  * interface with DMA support. Each card may have between 512K and
  81  * 2MB of SRAM on board depending on the configuration.
  82  *
  83  * The SysKonnect GEnesis controller can have either one or two XMAC
  84  * chips connected to it, allowing single or dual port NIC configurations.
  85  * SysKonnect has the distinction of being the only vendor on the market
  86  * with a dual port gigabit ethernet NIC. The GEnesis provides dual FIFOs,
  87  * dual DMA queues, packet/MAC/transmit arbiters and direct access to the
  88  * XMAC registers. This driver takes advantage of these features to allow
  89  * both XMACs to operate as independent interfaces.
  90  */
  91
  92 #include <sys/param.h>
  93 #include <sys/systm.h>
  94 #include <sys/sockio.h>
  95 #include <sys/mbuf.h>
  96 #include <sys/malloc.h>
  97 #include <sys/kernel.h>
  98 #include <sys/socket.h>
  99 #include <sys/queue.h>
 100
 101 #include <net/if.h>
 102 #include <net/if_arp.h>
 103 #include <net/ethernet.h>
 104 #include <net/if_dl.h>
 105 #include <net/if_media.h>
 106
 107 #include <net/bpf.h>
 108
 109 #include <vm/vm.h>              /* for vtophys */
 110 #include <vm/pmap.h>            /* for vtophys */
 111 #include <machine/clock.h>      /* for DELAY */
 112 #include <machine/bus_pio.h>
 113 #include <machine/bus_memio.h>
 114 #include <machine/bus.h>
 115 #include <machine/resource.h>
 116 #include <sys/bus.h>
 117 #include <sys/rman.h>
 118
 119 #include "../mii_layer/mii.h"
 120 #include "../mii_layer/miivar.h"
 121 #include "../mii_layer/brgphyreg.h"
 122
 123 #include <bus/pci/pcireg.h>
 124 #include <bus/pci/pcivar.h>
 125
 126 #if 0
 127 #define SK_USEIOSPACE
 128 #endif
 129
 130 #include "if_skreg.h"
 131 #include "xmaciireg.h"
 132 #include "yukonreg.h"
 133
 134 /* "controller miibus0" required.  See GENERIC if you get errors here. */
 135 #include "miibus_if.h"
 136
 137 static struct sk_type sk_devs[] = {
 138         {
 139                 VENDORID_SK,
 140                 DEVICEID_SK_V1,
 141                 "SysKonnect Gigabit Ethernet (V1.0)"
 142         },
 143         {
 144                 VENDORID_SK,
 145                 DEVICEID_SK_V2,
 146                 "SysKonnect Gigabit Ethernet (V2.0)"
 147         },
 148         {
 149                 VENDORID_MARVELL,
 150                 DEVICEID_SK_V2,
 151                 "Marvell Gigabit Ethernet"
 152         },
 153         {
 154                 VENDORID_3COM,
 155                 DEVICEID_3COM_3C940,
 156                 "3Com 3C940 Gigabit Ethernet"
 157         },
 158         {
 159                 VENDORID_LINKSYS,
 160                 DEVICEID_LINKSYS_EG1032,
 161                 "Linksys EG1032 Gigabit Ethernet"
 162         },
 163         {
 164                 VENDORID_DLINK,
 165                 DEVICEID_DLINK_DGE530T,
 166                 "D-Link DGE-530T Gigabit Ethernet"
 167         },
 168         { 0, 0, NULL }
 169 };
 170
 171 static int skc_probe            (device_t);
 172 static int skc_attach           (device_t);
 173 static int skc_detach           (device_t);
 174 static void skc_shutdown        (device_t);
 175 static int sk_probe             (device_t);
 176 static int sk_attach            (device_t);
 177 static int sk_detach            (device_t);
 178 static void sk_tick             (void *);
 179 static void sk_intr             (void *);
 180 static void sk_intr_bcom        (struct sk_if_softc *);
 181 static void sk_intr_xmac        (struct sk_if_softc *);
 182 static void sk_intr_yukon       (struct sk_if_softc *);
 183 static void sk_rxeof            (struct sk_if_softc *);
 184 static void sk_txeof            (struct sk_if_softc *);
 185 static int sk_encap             (struct sk_if_softc *, struct mbuf *,
 186                                         u_int32_t *);
 187 static void sk_start            (struct ifnet *);
 188 static int sk_ioctl             (struct ifnet *, u_long, caddr_t,
 189                                         struct ucred *);
 190 static void sk_init             (void *);
 191 static void sk_init_xmac        (struct sk_if_softc *);
 192 static void sk_init_yukon       (struct sk_if_softc *);
 193 static void sk_stop             (struct sk_if_softc *);
 194 static void sk_watchdog         (struct ifnet *);
 195 static int sk_ifmedia_upd       (struct ifnet *);
 196 static void sk_ifmedia_sts      (struct ifnet *, struct ifmediareq *);
 197 static void sk_reset            (struct sk_softc *);
 198 static int sk_newbuf            (struct sk_if_softc *,
 199                                         struct sk_chain *, struct mbuf *);
 200 static int sk_alloc_jumbo_mem   (struct sk_if_softc *);
 201 static void *sk_jalloc          (struct sk_if_softc *);
 202 static void sk_jfree            (caddr_t, u_int);
 203 static void sk_jref             (caddr_t, u_int);
 204 static int sk_init_rx_ring      (struct sk_if_softc *);
 205 static void sk_init_tx_ring     (struct sk_if_softc *);
 206 static u_int32_t sk_win_read_4  (struct sk_softc *, int);
 207 static u_int16_t sk_win_read_2  (struct sk_softc *, int);
 208 static u_int8_t sk_win_read_1   (struct sk_softc *, int);
 209 static void sk_win_write_4      (struct sk_softc *, int, u_int32_t);
 210 static void sk_win_write_2      (struct sk_softc *, int, u_int32_t);
 211 static void sk_win_write_1      (struct sk_softc *, int, u_int32_t);
 212 static u_int8_t sk_vpd_readbyte (struct sk_softc *, int);
 213 static void sk_vpd_read_res     (struct sk_softc *,
 214                                         struct vpd_res *, int);
 215 static void sk_vpd_read         (struct sk_softc *);
 216
 217 static int sk_miibus_readreg    (device_t, int, int);
 218 static int sk_miibus_writereg   (device_t, int, int, int);
 219 static void sk_miibus_statchg   (device_t);
 220
 221 static int sk_xmac_miibus_readreg     (struct sk_if_softc *, int, int);
 222 static int sk_xmac_miibus_writereg    (struct sk_if_softc *, int, int, int);
 223 static void sk_xmac_miibus_statchg    (struct sk_if_softc *);
 224
 225 static int sk_marv_miibus_readreg     (struct sk_if_softc *, int, int);
 226 static int sk_marv_miibus_writereg    (struct sk_if_softc *, int, int, int);
 227 static void sk_marv_miibus_statchg    (struct sk_if_softc *);
 228
 229 static u_int32_t xmac_calchash  (caddr_t);
 230 static u_int32_t gmac_calchash  (caddr_t);
 231 static void sk_setfilt          (struct sk_if_softc *, caddr_t, int);
 232 static void sk_setmulti         (struct sk_if_softc *);
 233 static void sk_setpromisc       (struct sk_if_softc *);
 234
 235 #ifdef SK_USEIOSPACE
 236 #define SK_RES          SYS_RES_IOPORT
 237 #define SK_RID          SK_PCI_LOIO
 238 #else
 239 #define SK_RES          SYS_RES_MEMORY
 240 #define SK_RID          SK_PCI_LOMEM
 241 #endif
 242
 243 /*
 244  * Note that we have newbus methods for both the GEnesis controller
 245  * itself and the XMAC(s). The XMACs are children of the GEnesis, and
 246  * the miibus code is a child of the XMACs. We need to do it this way
 247  * so that the miibus drivers can access the PHY registers on the
 248  * right PHY. It's not quite what I had in mind, but it's the only
 249  * design that achieves the desired effect.
 250  */
 251 static device_method_t skc_methods[] = {
 252         /* Device interface */
 253         DEVMETHOD(device_probe,         skc_probe),
 254         DEVMETHOD(device_attach,        skc_attach),
 255         DEVMETHOD(device_detach,        skc_detach),
 256         DEVMETHOD(device_shutdown,      skc_shutdown),
 257
 258         /* bus interface */
 259         DEVMETHOD(bus_print_child,      bus_generic_print_child),
 260         DEVMETHOD(bus_driver_added,     bus_generic_driver_added),
 261
 262         { 0, 0 }
 263 };
 264
 265 static driver_t skc_driver = {
 266         "skc",
 267         skc_methods,
 268         sizeof(struct sk_softc)
 269 };
 270
 271 static devclass_t skc_devclass;
 272
 273 static device_method_t sk_methods[] = {
 274         /* Device interface */
 275         DEVMETHOD(device_probe,         sk_probe),
 276         DEVMETHOD(device_attach,        sk_attach),
 277         DEVMETHOD(device_detach,        sk_detach),
 278         DEVMETHOD(device_shutdown,      bus_generic_shutdown),
 279
 280         /* bus interface */
 281         DEVMETHOD(bus_print_child,      bus_generic_print_child),
 282         DEVMETHOD(bus_driver_added,     bus_generic_driver_added),
 283
 284         /* MII interface */
 285         DEVMETHOD(miibus_readreg,       sk_miibus_readreg),
 286         DEVMETHOD(miibus_writereg,      sk_miibus_writereg),
 287         DEVMETHOD(miibus_statchg,       sk_miibus_statchg),
 288
 289         { 0, 0 }
 290 };
 291
 292 static driver_t sk_driver = {
 293         "sk",
 294         sk_methods,
 295         sizeof(struct sk_if_softc)
 296 };
 297
 298 static devclass_t sk_devclass;
 299
 300 DECLARE_DUMMY_MODULE(if_sk);
 301 DRIVER_MODULE(if_sk, pci, skc_driver, skc_devclass, 0, 0);
 302 DRIVER_MODULE(if_sk, skc, sk_driver, sk_devclass, 0, 0);
 303 DRIVER_MODULE(miibus, sk, miibus_driver, miibus_devclass, 0, 0);
 304
 305 #define SK_SETBIT(sc, reg, x)           \
 306         CSR_WRITE_4(sc, reg, CSR_READ_4(sc, reg) | x)
 307
 308 #define SK_CLRBIT(sc, reg, x)           \
 309         CSR_WRITE_4(sc, reg, CSR_READ_4(sc, reg) & ~x)
 310
 311 #define SK_WIN_SETBIT_4(sc, reg, x)     \
 312         sk_win_write_4(sc, reg, sk_win_read_4(sc, reg) | x)
 313
 314 #define SK_WIN_CLRBIT_4(sc, reg, x)     \
 315         sk_win_write_4(sc, reg, sk_win_read_4(sc, reg) & ~x)
 316
 317 #define SK_WIN_SETBIT_2(sc, reg, x)     \
 318         sk_win_write_2(sc, reg, sk_win_read_2(sc, reg) | x)
 319
 320 #define SK_WIN_CLRBIT_2(sc, reg, x)     \
 321         sk_win_write_2(sc, reg, sk_win_read_2(sc, reg) & ~x)
 322
 323 static u_int32_t sk_win_read_4(sc, reg)
 324         struct sk_softc         *sc;
 325         int                     reg;
 326 {
 327 #ifdef SK_USEIOSPACE
 328         CSR_WRITE_4(sc, SK_RAP, SK_WIN(reg));
 329         return(CSR_READ_4(sc, SK_WIN_BASE + SK_REG(reg)));
 330 #else
 331         return(CSR_READ_4(sc, reg));
 332 #endif
 333 }
 334
 335 static u_int16_t sk_win_read_2(sc, reg)
 336         struct sk_softc         *sc;
 337         int                     reg;
 338 {
 339 #ifdef SK_USEIOSPACE
 340         CSR_WRITE_4(sc, SK_RAP, SK_WIN(reg));
 341         return(CSR_READ_2(sc, SK_WIN_BASE + SK_REG(reg)));
 342 #else
 343         return(CSR_READ_2(sc, reg));
 344 #endif
 345 }
 346
 347 static u_int8_t sk_win_read_1(sc, reg)
 348         struct sk_softc         *sc;
 349         int                     reg;
 350 {
 351 #ifdef SK_USEIOSPACE
 352         CSR_WRITE_4(sc, SK_RAP, SK_WIN(reg));
 353         return(CSR_READ_1(sc, SK_WIN_BASE + SK_REG(reg)));
 354 #else
 355         return(CSR_READ_1(sc, reg));
 356 #endif
 357 }
 358
 359 static void sk_win_write_4(sc, reg, val)
 360         struct sk_softc         *sc;
 361         int                     reg;
 362         u_int32_t               val;
 363 {
 364 #ifdef SK_USEIOSPACE
 365         CSR_WRITE_4(sc, SK_RAP, SK_WIN(reg));
 366         CSR_WRITE_4(sc, SK_WIN_BASE + SK_REG(reg), val);
 367 #else
 368         CSR_WRITE_4(sc, reg, val);
 369 #endif
 370         return;
 371 }
 372
 373 static void sk_win_write_2(sc, reg, val)
 374         struct sk_softc         *sc;
 375         int                     reg;
 376         u_int32_t               val;
 377 {
 378 #ifdef SK_USEIOSPACE
 379         CSR_WRITE_4(sc, SK_RAP, SK_WIN(reg));
 380         CSR_WRITE_2(sc, SK_WIN_BASE + SK_REG(reg), val);
 381 #else
 382         CSR_WRITE_2(sc, reg, val);
 383 #endif
 384         return;
 385 }
 386
 387 static void sk_win_write_1(sc, reg, val)
 388         struct sk_softc         *sc;
 389         int                     reg;
 390         u_int32_t               val;
 391 {
 392 #ifdef SK_USEIOSPACE
 393         CSR_WRITE_4(sc, SK_RAP, SK_WIN(reg));
 394         CSR_WRITE_1(sc, SK_WIN_BASE + SK_REG(reg), val);
 395 #else
 396         CSR_WRITE_1(sc, reg, val);
 397 #endif
 398         return;
 399 }
 400
 401 /*
 402  * The VPD EEPROM contains Vital Product Data, as suggested in
 403  * the PCI 2.1 specification. The VPD data is separared into areas
 404  * denoted by resource IDs. The SysKonnect VPD contains an ID string
 405  * resource (the name of the adapter), a read-only area resource
 406  * containing various key/data fields and a read/write area which
 407  * can be used to store asset management information or log messages.
 408  * We read the ID string and read-only into buffers attached to
 409  * the controller softc structure for later use. At the moment,
 410  * we only use the ID string during sk_attach().
 411  */
 412 static u_int8_t sk_vpd_readbyte(sc, addr)
 413         struct sk_softc         *sc;
 414         int                     addr;
 415 {
 416         int                     i;
 417
 418         sk_win_write_2(sc, SK_PCI_REG(SK_PCI_VPD_ADDR), addr);
 419         for (i = 0; i < SK_TIMEOUT; i++) {
 420                 DELAY(1);
 421                 if (sk_win_read_2(sc,
 422                     SK_PCI_REG(SK_PCI_VPD_ADDR)) & SK_VPD_FLAG)
 423                         break;
 424         }
 425
 426         if (i == SK_TIMEOUT)
 427                 return(0);
 428
 429         return(sk_win_read_1(sc, SK_PCI_REG(SK_PCI_VPD_DATA)));
 430 }
 431
 432 static void sk_vpd_read_res(sc, res, addr)
 433         struct sk_softc         *sc;
 434         struct vpd_res          *res;
 435         int                     addr;
 436 {
 437         int                     i;
 438         u_int8_t                *ptr;
 439
 440         ptr = (u_int8_t *)res;
 441         for (i = 0; i < sizeof(struct vpd_res); i++)
 442                 ptr[i] = sk_vpd_readbyte(sc, i + addr);
 443
 444         return;
 445 }
 446
 447 static void sk_vpd_read(sc)
 448         struct sk_softc         *sc;
 449 {
 450         int                     pos = 0, i;
 451         struct vpd_res          res;
 452
 453         if (sc->sk_vpd_prodname != NULL)
 454                 free(sc->sk_vpd_prodname, M_DEVBUF);
 455         if (sc->sk_vpd_readonly != NULL)
 456                 free(sc->sk_vpd_readonly, M_DEVBUF);
 457         sc->sk_vpd_prodname = NULL;
 458         sc->sk_vpd_readonly = NULL;
 459
 460         sk_vpd_read_res(sc, &res, pos);
 461
 462         if (res.vr_id != VPD_RES_ID) {
 463                 printf("skc%d: bad VPD resource id: expected %x got %x\n",
 464                     sc->sk_unit, VPD_RES_ID, res.vr_id);
 465                 return;
 466         }
 467
 468         pos += sizeof(res);
 469         sc->sk_vpd_prodname = malloc(res.vr_len + 1, M_DEVBUF, M_INTWAIT);
 470         for (i = 0; i < res.vr_len; i++)
 471                 sc->sk_vpd_prodname[i] = sk_vpd_readbyte(sc, i + pos);
 472         sc->sk_vpd_prodname[i] = '\0';
 473         pos += i;
 474
 475         sk_vpd_read_res(sc, &res, pos);
 476
 477         if (res.vr_id != VPD_RES_READ) {
 478                 printf("skc%d: bad VPD resource id: expected %x got %x\n",
 479                     sc->sk_unit, VPD_RES_READ, res.vr_id);
 480                 return;
 481         }
 482
 483         pos += sizeof(res);
 484         sc->sk_vpd_readonly = malloc(res.vr_len, M_DEVBUF, M_INTWAIT);
 485         for (i = 0; i < res.vr_len + 1; i++)
 486                 sc->sk_vpd_readonly[i] = sk_vpd_readbyte(sc, i + pos);
 487
 488         return;
 489 }
 490
 491 static int sk_miibus_readreg(dev, phy, reg)
 492         device_t                dev;
 493         int                     phy, reg;
 494 {
 495         struct sk_if_softc      *sc_if;
 496
 497         sc_if = device_get_softc(dev);
 498
 499         switch(sc_if->sk_softc->sk_type) {
 500         case SK_GENESIS:
 501                 return(sk_xmac_miibus_readreg(sc_if, phy, reg));
 502         case SK_YUKON:
 503                 return(sk_marv_miibus_readreg(sc_if, phy, reg));
 504         }
 505
 506         return(0);
 507 }
 508
 509 static int sk_miibus_writereg(dev, phy, reg, val)
 510         device_t                dev;
 511         int                     phy, reg, val;
 512 {
 513         struct sk_if_softc      *sc_if;
 514
 515         sc_if = device_get_softc(dev);
 516
 517         switch(sc_if->sk_softc->sk_type) {
 518         case SK_GENESIS:
 519                 return(sk_xmac_miibus_writereg(sc_if, phy, reg, val));
 520         case SK_YUKON:
 521                 return(sk_marv_miibus_writereg(sc_if, phy, reg, val));
 522         }
 523
 524         return(0);
 525 }
 526
 527 static void sk_miibus_statchg(dev)
 528         device_t                dev;
 529 {
 530         struct sk_if_softc      *sc_if;
 531
 532         sc_if = device_get_softc(dev);
 533
 534         switch(sc_if->sk_softc->sk_type) {
 535         case SK_GENESIS:
 536                 sk_xmac_miibus_statchg(sc_if);
 537                 break;
 538         case SK_YUKON:
 539                 sk_marv_miibus_statchg(sc_if);
 540                 break;
 541         }
 542
 543         return;
 544 }
 545
 546 static int sk_xmac_miibus_readreg(sc_if, phy, reg)
 547         struct sk_if_softc      *sc_if;
 548         int                     phy, reg;
 549 {
 550         int                     i;
 551
 552         if (sc_if->sk_phytype == SK_PHYTYPE_XMAC && phy != 0)
 553                 return(0);
 554
 555         SK_XM_WRITE_2(sc_if, XM_PHY_ADDR, reg|(phy << 8));
 556         SK_XM_READ_2(sc_if, XM_PHY_DATA);
 557         if (sc_if->sk_phytype != SK_PHYTYPE_XMAC) {
 558                 for (i = 0; i < SK_TIMEOUT; i++) {
 559                         DELAY(1);
 560                         if (SK_XM_READ_2(sc_if, XM_MMUCMD) &
 561                             XM_MMUCMD_PHYDATARDY)
 562                                 break;
 563                 }
 564
 565                 if (i == SK_TIMEOUT) {
 566                         printf("sk%d: phy failed to come ready\n",
 567                             sc_if->sk_unit);
 568                         return(0);
 569                 }
 570         }
 571         DELAY(1);
 572         return(SK_XM_READ_2(sc_if, XM_PHY_DATA));
 573 }
 574
 575 static int sk_xmac_miibus_writereg(sc_if, phy, reg, val)
 576         struct sk_if_softc      *sc_if;
 577         int                     phy, reg, val;
 578 {
 579         int                     i;
 580
 581         SK_XM_WRITE_2(sc_if, XM_PHY_ADDR, reg|(phy << 8));
 582         for (i = 0; i < SK_TIMEOUT; i++) {
 583                 if (!(SK_XM_READ_2(sc_if, XM_MMUCMD) & XM_MMUCMD_PHYBUSY))
 584                         break;
 585         }
 586
 587         if (i == SK_TIMEOUT) {
 588                 printf("sk%d: phy failed to come ready\n", sc_if->sk_unit);
 589                 return(ETIMEDOUT);
 590         }
 591
 592         SK_XM_WRITE_2(sc_if, XM_PHY_DATA, val);
 593         for (i = 0; i < SK_TIMEOUT; i++) {
 594                 DELAY(1);
 595                 if (!(SK_XM_READ_2(sc_if, XM_MMUCMD) & XM_MMUCMD_PHYBUSY))
 596                         break;
 597         }
 598
 599         if (i == SK_TIMEOUT)
 600                 printf("sk%d: phy write timed out\n", sc_if->sk_unit);
 601
 602         return(0);
 603 }
 604
 605 static void sk_xmac_miibus_statchg(sc_if)
 606         struct sk_if_softc      *sc_if;
 607 {
 608         struct mii_data         *mii;
 609
 610         mii = device_get_softc(sc_if->sk_miibus);
 611
 612         /*
 613          * If this is a GMII PHY, manually set the XMAC's
 614          * duplex mode accordingly.
 615          */
 616         if (sc_if->sk_phytype != SK_PHYTYPE_XMAC) {
 617                 if ((mii->mii_media_active & IFM_GMASK) == IFM_FDX) {
 618                         SK_XM_SETBIT_2(sc_if, XM_MMUCMD, XM_MMUCMD_GMIIFDX);
 619                 } else {
 620                         SK_XM_CLRBIT_2(sc_if, XM_MMUCMD, XM_MMUCMD_GMIIFDX);
 621                 }
 622         }
 623
 624         return;
 625 }
 626
 627 static int sk_marv_miibus_readreg(sc_if, phy, reg)
 628         struct sk_if_softc      *sc_if;
 629         int                     phy, reg;
 630 {
 631         u_int16_t               val;
 632         int                     i;
 633
 634         if (phy != 0 ||
 635             (sc_if->sk_phytype != SK_PHYTYPE_MARV_COPPER &&
 636              sc_if->sk_phytype != SK_PHYTYPE_MARV_FIBER)) {
 637                 return(0);
 638         }
 639
 640         SK_YU_WRITE_2(sc_if, YUKON_SMICR, YU_SMICR_PHYAD(phy) |
 641                       YU_SMICR_REGAD(reg) | YU_SMICR_OP_READ);
 642
 643         for (i = 0; i < SK_TIMEOUT; i++) {
 644                 DELAY(1);
 645                 val = SK_YU_READ_2(sc_if, YUKON_SMICR);
 646                 if (val & YU_SMICR_READ_VALID)
 647                         break;
 648         }
 649
 650         if (i == SK_TIMEOUT) {
 651                 printf("sk%d: phy failed to come ready\n",
 652                     sc_if->sk_unit);
 653                 return(0);
 654         }
 655
 656         val = SK_YU_READ_2(sc_if, YUKON_SMIDR);
 657
 658         return(val);
 659 }
 660
 661 static int sk_marv_miibus_writereg(sc_if, phy, reg, val)
 662         struct sk_if_softc      *sc_if;
 663         int                     phy, reg, val;
 664 {
 665         int                     i;
 666
 667         SK_YU_WRITE_2(sc_if, YUKON_SMIDR, val);
 668         SK_YU_WRITE_2(sc_if, YUKON_SMICR, YU_SMICR_PHYAD(phy) |
 669                       YU_SMICR_REGAD(reg) | YU_SMICR_OP_WRITE);
 670
 671         for (i = 0; i < SK_TIMEOUT; i++) {
 672                 DELAY(1);
 673                 if (SK_YU_READ_2(sc_if, YUKON_SMICR) & YU_SMICR_BUSY)
 674                         break;
 675         }
 676
 677         return(0);
 678 }
 679
 680 static void sk_marv_miibus_statchg(sc_if)
 681         struct sk_if_softc      *sc_if;
 682 {
 683         return;
 684 }
 685
 686 #define XMAC_POLY               0xEDB88320
 687 #define GMAC_POLY               0x04C11DB7L
 688 #define HASH_BITS               6
 689
 690 static u_int32_t xmac_calchash(addr)
 691         caddr_t                 addr;
 692 {
 693         u_int32_t               idx, bit, data, crc;
 694
 695         /* Compute CRC for the address value. */
 696         crc = 0xFFFFFFFF; /* initial value */
 697
 698         for (idx = 0; idx < 6; idx++) {
 699                 for (data = *addr++, bit = 0; bit < 8; bit++, data >>= 1)
 700                         crc = (crc >> 1) ^ (((crc ^ data) & 1) ? XMAC_POLY : 0);
 701         }
 702
 703         return (~crc & ((1 << HASH_BITS) - 1));
 704 }
 705
 706 static u_int32_t gmac_calchash(addr)
 707     caddr_t                     addr;
 708 {
 709     u_int32_t               idx, bit, crc, tmpData, data;
 710
 711     /* Compute CRC for the address value. */
 712     crc = 0xFFFFFFFF; /* initial value */
 713
 714     for (idx = 0; idx < 6; idx++) {
 715         data = *addr++;
 716
 717         /* Change bit order in byte. */
 718         tmpData = data;
 719         for (bit = 0; bit < 8; bit++) {
 720             if (tmpData & 1) {
 721                 data |=  1 << (7 - bit);
 722             }
 723             else {
 724                 data &= ~(1 << (7 - bit));
 725             }
 726
 727             tmpData >>= 1;
 728         }
 729
 730         crc ^= (data << 24);
 731         for (bit = 0; bit < 8; bit++) {
 732             if (crc & 0x80000000) {
 733                 crc = (crc << 1) ^ GMAC_POLY;
 734             } else {
 735                 crc <<= 1;
 736             }
 737         }
 738     }
 739
 740     return (crc & ((1 << HASH_BITS) - 1));
 741 }
 742
 743 static void sk_setfilt(sc_if, addr, slot)
 744         struct sk_if_softc      *sc_if;
 745         caddr_t                 addr;
 746         int                     slot;
 747 {
 748         int                     base;
 749
 750         base = XM_RXFILT_ENTRY(slot);
 751
 752         SK_XM_WRITE_2(sc_if, base, *(u_int16_t *)(&addr[0]));
 753         SK_XM_WRITE_2(sc_if, base + 2, *(u_int16_t *)(&addr[2]));
 754         SK_XM_WRITE_2(sc_if, base + 4, *(u_int16_t *)(&addr[4]));
 755
 756         return;
 757 }
 758
 759 static void sk_setmulti(sc_if)
 760         struct sk_if_softc      *sc_if;
 761 {
 762         struct sk_softc         *sc = sc_if->sk_softc;
 763         struct ifnet            *ifp = &sc_if->arpcom.ac_if;
 764         u_int32_t               hashes[2] = { 0, 0 };
 765         int                     h, i;
 766         struct ifmultiaddr      *ifma;
 767         u_int8_t                dummy[] = { 0, 0, 0, 0, 0 ,0 };
 768
 769
 770         /* First, zot all the existing filters. */
 771         switch(sc->sk_type) {
 772         case SK_GENESIS:
 773                 for (i = 1; i < XM_RXFILT_MAX; i++)
 774                         sk_setfilt(sc_if, (caddr_t)&dummy, i);
 775
 776                 SK_XM_WRITE_4(sc_if, XM_MAR0, 0);
 777                 SK_XM_WRITE_4(sc_if, XM_MAR2, 0);
 778                 break;
 779         case SK_YUKON:
 780                 SK_YU_WRITE_2(sc_if, YUKON_MCAH1, 0);
 781                 SK_YU_WRITE_2(sc_if, YUKON_MCAH2, 0);
 782                 SK_YU_WRITE_2(sc_if, YUKON_MCAH3, 0);
 783                 SK_YU_WRITE_2(sc_if, YUKON_MCAH4, 0);
 784                 break;
 785         }
 786
 787         /* Now program new ones. */
 788         if (ifp->if_flags & IFF_ALLMULTI || ifp->if_flags & IFF_PROMISC) {
 789                 hashes[0] = 0xFFFFFFFF;
 790                 hashes[1] = 0xFFFFFFFF;
 791         } else {
 792                 i = 1;
 793                 /* First find the tail of the list. */
 794                 for (ifma = ifp->if_multiaddrs.lh_first; ifma != NULL;
 795                                         ifma = ifma->ifma_link.le_next) {
 796                         if (ifma->ifma_link.le_next == NULL)
 797                                 break;
 798                 }
 799                 /* Now traverse the list backwards. */
 800                 for (; ifma != NULL && ifma != (void *)&ifp->if_multiaddrs;
 801                         ifma = (struct ifmultiaddr *)ifma->ifma_link.le_prev) {
 802                         if (ifma->ifma_addr->sa_family != AF_LINK)
 803                                 continue;
 804                         /*
 805                          * Program the first XM_RXFILT_MAX multicast groups
 806                          * into the perfect filter. For all others,
 807                          * use the hash table.
 808                          */
 809                         if (sc->sk_type == SK_GENESIS && i < XM_RXFILT_MAX) {
 810                                 sk_setfilt(sc_if,
 811                         LLADDR((struct sockaddr_dl *)ifma->ifma_addr), i);
 812                                 i++;
 813                                 continue;
 814                         }
 815
 816                         switch(sc->sk_type) {
 817                         case SK_GENESIS:
 818                             h = xmac_calchash(
 819                                 LLADDR((struct sockaddr_dl *)ifma->ifma_addr));
 820                             if (h < 32)
 821                                 hashes[0] |= (1 << h);
 822                             else
 823                                 hashes[1] |= (1 << (h - 32));
 824                             break;
 825
 826                         case SK_YUKON:
 827                             h = gmac_calchash(
 828                                 LLADDR((struct sockaddr_dl *)ifma->ifma_addr));
 829                             if (h < 32)
 830                                 hashes[0] |= (1 << h);
 831                             else
 832                                 hashes[1] |= (1 << (h - 32));
 833                             break;
 834                         }
 835                 }
 836         }
 837
 838         switch(sc->sk_type) {
 839         case SK_GENESIS:
 840                 SK_XM_SETBIT_4(sc_if, XM_MODE, XM_MODE_RX_USE_HASH|
 841                                XM_MODE_RX_USE_PERFECT);
 842                 SK_XM_WRITE_4(sc_if, XM_MAR0, hashes[0]);
 843                 SK_XM_WRITE_4(sc_if, XM_MAR2, hashes[1]);
 844                 break;
 845         case SK_YUKON:
 846                 SK_YU_WRITE_2(sc_if, YUKON_MCAH1, hashes[0] & 0xffff);
 847                 SK_YU_WRITE_2(sc_if, YUKON_MCAH2, (hashes[0] >> 16) & 0xffff);
 848                 SK_YU_WRITE_2(sc_if, YUKON_MCAH3, hashes[1] & 0xffff);
 849                 SK_YU_WRITE_2(sc_if, YUKON_MCAH4, (hashes[1] >> 16) & 0xffff);
 850                 break;
 851         }
 852
 853         return;
 854 }
 855
 856 static void sk_setpromisc(sc_if)
 857         struct sk_if_softc      *sc_if;
 858 {
 859         struct sk_softc         *sc = sc_if->sk_softc;
 860         struct ifnet            *ifp = &sc_if->arpcom.ac_if;
 861
 862         switch(sc->sk_type) {
 863         case SK_GENESIS:
 864                 if (ifp->if_flags & IFF_PROMISC) {
 865                         SK_XM_SETBIT_4(sc_if, XM_MODE, XM_MODE_RX_PROMISC);
 866                 } else {
 867                         SK_XM_CLRBIT_4(sc_if, XM_MODE, XM_MODE_RX_PROMISC);
 868                 }
 869                 break;
 870         case SK_YUKON:
 871                 if (ifp->if_flags & IFF_PROMISC) {
 872                         SK_YU_CLRBIT_2(sc_if, YUKON_RCR,
 873                             YU_RCR_UFLEN | YU_RCR_MUFLEN);
 874                 } else {
 875                         SK_YU_SETBIT_2(sc_if, YUKON_RCR,
 876                             YU_RCR_UFLEN | YU_RCR_MUFLEN);
 877                 }
 878                 break;
 879         }
 880
 881         return;
 882 }
 883
 884 static int sk_init_rx_ring(sc_if)
 885         struct sk_if_softc      *sc_if;
 886 {
 887         struct sk_chain_data    *cd = &sc_if->sk_cdata;
 888         struct sk_ring_data     *rd = sc_if->sk_rdata;
 889         int                     i;
 890
 891         bzero((char *)rd->sk_rx_ring,
 892             sizeof(struct sk_rx_desc) * SK_RX_RING_CNT);
 893
 894         for (i = 0; i < SK_RX_RING_CNT; i++) {
 895                 cd->sk_rx_chain[i].sk_desc = &rd->sk_rx_ring[i];
 896                 if (sk_newbuf(sc_if, &cd->sk_rx_chain[i], NULL) == ENOBUFS)
 897                         return(ENOBUFS);
 898                 if (i == (SK_RX_RING_CNT - 1)) {
 899                         cd->sk_rx_chain[i].sk_next =
 900                             &cd->sk_rx_chain[0];
 901                         rd->sk_rx_ring[i].sk_next =
 902                             vtophys(&rd->sk_rx_ring[0]);
 903                 } else {
 904                         cd->sk_rx_chain[i].sk_next =
 905                             &cd->sk_rx_chain[i + 1];
 906                         rd->sk_rx_ring[i].sk_next =
 907                             vtophys(&rd->sk_rx_ring[i + 1]);
 908                 }
 909         }
 910
 911         sc_if->sk_cdata.sk_rx_prod = 0;
 912         sc_if->sk_cdata.sk_rx_cons = 0;
 913
 914         return(0);
 915 }
 916
 917 static void sk_init_tx_ring(sc_if)
 918         struct sk_if_softc      *sc_if;
 919 {
 920         struct sk_chain_data    *cd = &sc_if->sk_cdata;
 921         struct sk_ring_data     *rd = sc_if->sk_rdata;
 922         int                     i;
 923
 924         bzero((char *)sc_if->sk_rdata->sk_tx_ring,
 925             sizeof(struct sk_tx_desc) * SK_TX_RING_CNT);
 926
 927         for (i = 0; i < SK_TX_RING_CNT; i++) {
 928                 cd->sk_tx_chain[i].sk_desc = &rd->sk_tx_ring[i];
 929                 if (i == (SK_TX_RING_CNT - 1)) {
 930                         cd->sk_tx_chain[i].sk_next =
 931                             &cd->sk_tx_chain[0];
 932                         rd->sk_tx_ring[i].sk_next =
 933                             vtophys(&rd->sk_tx_ring[0]);
 934                 } else {
 935                         cd->sk_tx_chain[i].sk_next =
 936                             &cd->sk_tx_chain[i + 1];
 937                         rd->sk_tx_ring[i].sk_next =
 938                             vtophys(&rd->sk_tx_ring[i + 1]);
 939                 }
 940         }
 941
 942         sc_if->sk_cdata.sk_tx_prod = 0;
 943         sc_if->sk_cdata.sk_tx_cons = 0;
 944         sc_if->sk_cdata.sk_tx_cnt = 0;
 945
 946         return;
 947 }
 948
 949 static int sk_newbuf(sc_if, c, m)
 950         struct sk_if_softc      *sc_if;
 951         struct sk_chain         *c;
 952         struct mbuf             *m;
 953 {
 954         struct mbuf             *m_new = NULL;
 955         struct sk_rx_desc       *r;
 956
 957         if (m == NULL) {
 958                 caddr_t                 *buf = NULL;
 959
 960                 MGETHDR(m_new, MB_DONTWAIT, MT_DATA);
 961                 if (m_new == NULL)
 962                         return(ENOBUFS);
 963
 964                 /* Allocate the jumbo buffer */
 965                 buf = sk_jalloc(sc_if);
 966                 if (buf == NULL) {
 967                         m_freem(m_new);
 968 #ifdef SK_VERBOSE
 969                         printf("sk%d: jumbo allocation failed "
 970                             "-- packet dropped!\n", sc_if->sk_unit);
 971 #endif
 972                         return(ENOBUFS);
 973                 }
 974
 975                 /* Attach the buffer to the mbuf */
 976                 m_new->m_data = m_new->m_ext.ext_buf = (void *)buf;
 977                 m_new->m_flags |= M_EXT | M_EXT_OLD;
 978                 m_new->m_ext.ext_size = m_new->m_pkthdr.len =
 979                     m_new->m_len = SK_MCLBYTES;
 980                 m_new->m_ext.ext_nfree.old = sk_jfree;
 981                 m_new->m_ext.ext_nref.old = sk_jref;
 982         } else {
 983                 /*
 984                  * We're re-using a previously allocated mbuf;
 985                  * be sure to re-init pointers and lengths to
 986                  * default values.
 987                  */
 988                 m_new = m;
 989                 m_new->m_len = m_new->m_pkthdr.len = SK_MCLBYTES;
 990                 m_new->m_data = m_new->m_ext.ext_buf;
 991         }
 992
 993         /*
 994          * Adjust alignment so packet payload begins on a
 995          * longword boundary. Mandatory for Alpha, useful on
 996          * x86 too.
 997          */
 998         m_adj(m_new, ETHER_ALIGN);
 999
1000         r = c->sk_desc;
1001         c->sk_mbuf = m_new;
1002         r->sk_data_lo = vtophys(mtod(m_new, caddr_t));
1003         r->sk_ctl = m_new->m_len | SK_RXSTAT;
1004
1005         return(0);
1006 }
1007
1008 /*
1009  * Allocate jumbo buffer storage. The SysKonnect adapters support
1010  * "jumbograms" (9K frames), although SysKonnect doesn't currently
1011  * use them in their drivers. In order for us to use them, we need
1012  * large 9K receive buffers, however standard mbuf clusters are only
1013  * 2048 bytes in size. Consequently, we need to allocate and manage
1014  * our own jumbo buffer pool. Fortunately, this does not require an
1015  * excessive amount of additional code.
1016  */
1017 static int sk_alloc_jumbo_mem(sc_if)
1018         struct sk_if_softc      *sc_if;
1019 {
1020         caddr_t                 ptr;
1021         int             i;
1022         struct sk_jpool_entry   *entry;
1023
1024         /* Grab a big chunk o' storage. */
1025         sc_if->sk_cdata.sk_jumbo_buf = contigmalloc(SK_JMEM, M_DEVBUF,
1026             M_NOWAIT, 0, 0xffffffff, PAGE_SIZE, 0);
1027
1028         if (sc_if->sk_cdata.sk_jumbo_buf == NULL) {
1029                 printf("sk%d: no memory for jumbo buffers!\n", sc_if->sk_unit);
1030                 return(ENOBUFS);
1031         }
1032
1033         SLIST_INIT(&sc_if->sk_jfree_listhead);
1034         SLIST_INIT(&sc_if->sk_jinuse_listhead);
1035
1036         /*
1037          * Now divide it up into 9K pieces and save the addresses
1038          * in an array. Note that we play an evil trick here by using
1039          * the first few bytes in the buffer to hold the the address
1040          * of the softc structure for this interface. This is because
1041          * sk_jfree() needs it, but it is called by the mbuf management
1042          * code which will not pass it to us explicitly.
1043          */
1044         ptr = sc_if->sk_cdata.sk_jumbo_buf;
1045         for (i = 0; i < SK_JSLOTS; i++) {
1046                 u_int64_t               **aptr;
1047                 aptr = (u_int64_t **)ptr;
1048                 aptr[0] = (u_int64_t *)sc_if;
1049                 ptr += sizeof(u_int64_t);
1050                 sc_if->sk_cdata.sk_jslots[i].sk_buf = ptr;
1051                 sc_if->sk_cdata.sk_jslots[i].sk_inuse = 0;
1052                 ptr += SK_MCLBYTES;
1053                 entry = malloc(sizeof(struct sk_jpool_entry),
1054                     M_DEVBUF, M_WAITOK);
1055                 if (entry == NULL) {
1056                         free(sc_if->sk_cdata.sk_jumbo_buf, M_DEVBUF);
1057                         sc_if->sk_cdata.sk_jumbo_buf = NULL;
1058                         printf("sk%d: no memory for jumbo "
1059                             "buffer queue!\n", sc_if->sk_unit);
1060                         return(ENOBUFS);
1061                 }
1062                 entry->slot = i;
1063                 SLIST_INSERT_HEAD(&sc_if->sk_jfree_listhead,
1064                     entry, jpool_entries);
1065         }
1066
1067         return(0);
1068 }
1069
1070 /*
1071  * Allocate a jumbo buffer.
1072  */
1073 static void *sk_jalloc(sc_if)
1074         struct sk_if_softc      *sc_if;
1075 {
1076         struct sk_jpool_entry   *entry;
1077
1078         entry = SLIST_FIRST(&sc_if->sk_jfree_listhead);
1079
1080         if (entry == NULL) {
1081 #ifdef SK_VERBOSE
1082                 printf("sk%d: no free jumbo buffers\n", sc_if->sk_unit);
1083 #endif
1084                 return(NULL);
1085         }
1086
1087         SLIST_REMOVE_HEAD(&sc_if->sk_jfree_listhead, jpool_entries);
1088         SLIST_INSERT_HEAD(&sc_if->sk_jinuse_listhead, entry, jpool_entries);
1089         sc_if->sk_cdata.sk_jslots[entry->slot].sk_inuse = 1;
1090         return(sc_if->sk_cdata.sk_jslots[entry->slot].sk_buf);
1091 }
1092
1093 /*
1094  * Adjust usage count on a jumbo buffer. In general this doesn't
1095  * get used much because our jumbo buffers don't get passed around
1096  * a lot, but it's implemented for correctness.
1097  */
1098 static void sk_jref(buf, size)
1099         caddr_t                 buf;
1100         u_int                   size;
1101 {
1102         struct sk_if_softc      *sc_if;
1103         u_int64_t               **aptr;
1104         int             i;
1105
1106         /* Extract the softc struct pointer. */
1107         aptr = (u_int64_t **)(buf - sizeof(u_int64_t));
1108         sc_if = (struct sk_if_softc *)(aptr[0]);
1109
1110         if (sc_if == NULL)
1111                 panic("sk_jref: can't find softc pointer!");
1112
1113         if (size != SK_MCLBYTES)
1114                 panic("sk_jref: adjusting refcount of buf of wrong size!");
1115
1116         /* calculate the slot this buffer belongs to */
1117
1118         i = ((vm_offset_t)aptr
1119              - (vm_offset_t)sc_if->sk_cdata.sk_jumbo_buf) / SK_JLEN;
1120
1121         if ((i < 0) || (i >= SK_JSLOTS))
1122                 panic("sk_jref: asked to reference buffer "
1123                     "that we don't manage!");
1124         else if (sc_if->sk_cdata.sk_jslots[i].sk_inuse == 0)
1125                 panic("sk_jref: buffer already free!");
1126         else
1127                 sc_if->sk_cdata.sk_jslots[i].sk_inuse++;
1128
1129         return;
1130 }
1131
1132 /*
1133  * Release a jumbo buffer.
1134  */
1135 static void sk_jfree(buf, size)
1136         caddr_t                 buf;
1137         u_int                   size;
1138 {
1139         struct sk_if_softc      *sc_if;
1140         u_int64_t               **aptr;
1141         int                     i;
1142         struct sk_jpool_entry   *entry;
1143
1144         /* Extract the softc struct pointer. */
1145         aptr = (u_int64_t **)(buf - sizeof(u_int64_t));
1146         sc_if = (struct sk_if_softc *)(aptr[0]);
1147
1148         if (sc_if == NULL)
1149                 panic("sk_jfree: can't find softc pointer!");
1150
1151         if (size != SK_MCLBYTES)
1152                 panic("sk_jfree: freeing buffer of wrong size!");
1153
1154         /* calculate the slot this buffer belongs to */
1155
1156         i = ((vm_offset_t)aptr
1157              - (vm_offset_t)sc_if->sk_cdata.sk_jumbo_buf) / SK_JLEN;
1158
1159         if ((i < 0) || (i >= SK_JSLOTS))
1160                 panic("sk_jfree: asked to free buffer that we don't manage!");
1161         else if (sc_if->sk_cdata.sk_jslots[i].sk_inuse == 0)
1162                 panic("sk_jfree: buffer already free!");
1163         else {
1164                 sc_if->sk_cdata.sk_jslots[i].sk_inuse--;
1165                 if(sc_if->sk_cdata.sk_jslots[i].sk_inuse == 0) {
1166                         entry = SLIST_FIRST(&sc_if->sk_jinuse_listhead);
1167                         if (entry == NULL)
1168                                 panic("sk_jfree: buffer not in use!");
1169                         entry->slot = i;
1170                         SLIST_REMOVE_HEAD(&sc_if->sk_jinuse_listhead,
1171                                           jpool_entries);
1172                         SLIST_INSERT_HEAD(&sc_if->sk_jfree_listhead,
1173                                           entry, jpool_entries);
1174                 }
1175         }
1176
1177         return;
1178 }
1179
1180 /*
1181  * Set media options.
1182  */
1183 static int sk_ifmedia_upd(ifp)
1184         struct ifnet            *ifp;
1185 {
1186         struct sk_if_softc      *sc_if = ifp->if_softc;
1187         struct mii_data         *mii;
1188
1189         mii = device_get_softc(sc_if->sk_miibus);
1190         sk_init(sc_if);
1191         mii_mediachg(mii);
1192
1193         return(0);
1194 }
1195
1196 /*
1197  * Report current media status.
1198  */
1199 static void sk_ifmedia_sts(ifp, ifmr)
1200         struct ifnet            *ifp;
1201         struct ifmediareq       *ifmr;
1202 {
1203         struct sk_if_softc      *sc_if;
1204         struct mii_data         *mii;
1205
1206         sc_if = ifp->if_softc;
1207         mii = device_get_softc(sc_if->sk_miibus);
1208
1209         mii_pollstat(mii);
1210         ifmr->ifm_active = mii->mii_media_active;
1211         ifmr->ifm_status = mii->mii_media_status;
1212
1213         return;
1214 }
1215
1216 static int sk_ioctl(ifp, command, data, cr)
1217         struct ifnet            *ifp;
1218         u_long                  command;
1219         caddr_t                 data;
1220         struct ucred            *cr;
1221 {
1222         struct sk_if_softc      *sc_if = ifp->if_softc;
1223         struct ifreq            *ifr = (struct ifreq *) data;
1224         int                     s, error = 0;
1225         struct mii_data         *mii;
1226
1227         s = splimp();
1228
1229         switch(command) {
1230         case SIOCSIFADDR:
1231         case SIOCGIFADDR:
1232                 error = ether_ioctl(ifp, command, data);
1233                 break;
1234         case SIOCSIFMTU:
1235                 if (ifr->ifr_mtu > SK_JUMBO_MTU)
1236                         error = EINVAL;
1237                 else {
1238                         ifp->if_mtu = ifr->ifr_mtu;
1239                         sk_init(sc_if);
1240                 }
1241                 break;
1242         case SIOCSIFFLAGS:
1243                 if (ifp->if_flags & IFF_UP) {
1244                         if (ifp->if_flags & IFF_RUNNING) {
1245                                 if ((ifp->if_flags ^ sc_if->sk_if_flags)
1246                                     & IFF_PROMISC) {
1247                                         sk_setpromisc(sc_if);
1248                                         sk_setmulti(sc_if);
1249                                 }
1250                         } else
1251                                 sk_init(sc_if);
1252                 } else {
1253                         if (ifp->if_flags & IFF_RUNNING)
1254                                 sk_stop(sc_if);
1255                 }
1256                 sc_if->sk_if_flags = ifp->if_flags;
1257                 error = 0;
1258                 break;
1259         case SIOCADDMULTI:
1260         case SIOCDELMULTI:
1261                 sk_setmulti(sc_if);
1262                 error = 0;
1263                 break;
1264         case SIOCGIFMEDIA:
1265         case SIOCSIFMEDIA:
1266                 mii = device_get_softc(sc_if->sk_miibus);
1267                 error = ifmedia_ioctl(ifp, ifr, &mii->mii_media, command);
1268                 break;
1269         default:
1270                 error = EINVAL;
1271                 break;
1272         }
1273
1274         (void)splx(s);
1275
1276         return(error);
1277 }
1278
1279 /*
1280  * Probe for a SysKonnect GEnesis chip. Check the PCI vendor and device
1281  * IDs against our list and return a device name if we find a match.
1282  */
1283 static int skc_probe(dev)
1284         device_t                dev;
1285 {
1286         struct sk_softc         *sc;
1287         struct sk_type          *t = sk_devs;
1288
1289         sc = device_get_softc(dev);
1290
1291         while(t->sk_name != NULL) {
1292                 if ((pci_get_vendor(dev) == t->sk_vid) &&
1293                     (pci_get_device(dev) == t->sk_did)) {
1294                         device_set_desc(dev, t->sk_name);
1295                         return(0);
1296                 }
1297                 t++;
1298         }
1299
1300         return(ENXIO);
1301 }
1302
1303 /*
1304  * Force the GEnesis into reset, then bring it out of reset.
1305  */
1306 static void sk_reset(sc)
1307         struct sk_softc         *sc;
1308 {
1309         CSR_WRITE_2(sc, SK_CSR, SK_CSR_SW_RESET);
1310         CSR_WRITE_2(sc, SK_CSR, SK_CSR_MASTER_RESET);
1311         if (sc->sk_type == SK_YUKON)
1312                 CSR_WRITE_2(sc, SK_LINK_CTRL, SK_LINK_RESET_SET);
1313
1314         DELAY(1000);
1315         CSR_WRITE_2(sc, SK_CSR, SK_CSR_SW_UNRESET);
1316         DELAY(2);
1317         CSR_WRITE_2(sc, SK_CSR, SK_CSR_MASTER_UNRESET);
1318         if (sc->sk_type == SK_YUKON)
1319                 CSR_WRITE_2(sc, SK_LINK_CTRL, SK_LINK_RESET_CLEAR);
1320
1321         if (sc->sk_type == SK_GENESIS) {
1322                 /* Configure packet arbiter */
1323                 sk_win_write_2(sc, SK_PKTARB_CTL, SK_PKTARBCTL_UNRESET);
1324                 sk_win_write_2(sc, SK_RXPA1_TINIT, SK_PKTARB_TIMEOUT);
1325                 sk_win_write_2(sc, SK_TXPA1_TINIT, SK_PKTARB_TIMEOUT);
1326                 sk_win_write_2(sc, SK_RXPA2_TINIT, SK_PKTARB_TIMEOUT);
1327                 sk_win_write_2(sc, SK_TXPA2_TINIT, SK_PKTARB_TIMEOUT);
1328         }
1329
1330         /* Enable RAM interface */
1331         sk_win_write_4(sc, SK_RAMCTL, SK_RAMCTL_UNRESET);
1332
1333         /*
1334          * Configure interrupt moderation. The moderation timer
1335          * defers interrupts specified in the interrupt moderation
1336          * timer mask based on the timeout specified in the interrupt
1337          * moderation timer init register. Each bit in the timer
1338          * register represents 18.825ns, so to specify a timeout in
1339          * microseconds, we have to multiply by 54.
1340          */
1341         sk_win_write_4(sc, SK_IMTIMERINIT, SK_IM_USECS(200));
1342         sk_win_write_4(sc, SK_IMMR, SK_ISR_TX1_S_EOF|SK_ISR_TX2_S_EOF|
1343             SK_ISR_RX1_EOF|SK_ISR_RX2_EOF);
1344         sk_win_write_1(sc, SK_IMTIMERCTL, SK_IMCTL_START);
1345
1346         return;
1347 }
1348
1349 static int sk_probe(dev)
1350         device_t                dev;
1351 {
1352         struct sk_softc         *sc;
1353
1354         sc = device_get_softc(device_get_parent(dev));
1355
1356         /*
1357          * Not much to do here. We always know there will be
1358          * at least one XMAC present, and if there are two,
1359          * skc_attach() will create a second device instance
1360          * for us.
1361          */
1362         switch (sc->sk_type) {
1363         case SK_GENESIS:
1364                 device_set_desc(dev, "XaQti Corp. XMAC II");
1365                 break;
1366         case SK_YUKON:
1367                 device_set_desc(dev, "Marvell Semiconductor, Inc. Yukon");
1368                 break;
1369         }
1370
1371         return(0);
1372 }
1373
1374 /*
1375  * Each XMAC chip is attached as a separate logical IP interface.
1376  * Single port cards will have only one logical interface of course.
1377  */
1378 static int sk_attach(dev)
1379         device_t                dev;
1380 {
1381         struct sk_softc         *sc;
1382         struct sk_if_softc      *sc_if;
1383         struct ifnet            *ifp;
1384         int                     i, port;
1385
1386         if (dev == NULL)
1387                 return(EINVAL);
1388
1389         sc_if = device_get_softc(dev);
1390         sc = device_get_softc(device_get_parent(dev));
1391         port = *(int *)device_get_ivars(dev);
1392         free(device_get_ivars(dev), M_DEVBUF);
1393         device_set_ivars(dev, NULL);
1394         sc_if->sk_dev = dev;
1395         callout_init(&sc_if->sk_tick_timer);
1396
1397         bzero((char *)sc_if, sizeof(struct sk_if_softc));
1398
1399         sc_if->sk_dev = dev;
1400         sc_if->sk_unit = device_get_unit(dev);
1401         sc_if->sk_port = port;
1402         sc_if->sk_softc = sc;
1403         sc->sk_if[port] = sc_if;
1404         if (port == SK_PORT_A)
1405                 sc_if->sk_tx_bmu = SK_BMU_TXS_CSR0;
1406         if (port == SK_PORT_B)
1407                 sc_if->sk_tx_bmu = SK_BMU_TXS_CSR1;
1408
1409         /*
1410          * Get station address for this interface. Note that
1411          * dual port cards actually come with three station
1412          * addresses: one for each port, plus an extra. The
1413          * extra one is used by the SysKonnect driver software
1414          * as a 'virtual' station address for when both ports
1415          * are operating in failover mode. Currently we don't
1416          * use this extra address.
1417          */
1418         for (i = 0; i < ETHER_ADDR_LEN; i++)
1419                 sc_if->arpcom.ac_enaddr[i] =
1420                     sk_win_read_1(sc, SK_MAC0_0 + (port * 8) + i);
1421
1422         /*
1423          * Set up RAM buffer addresses. The NIC will have a certain
1424          * amount of SRAM on it, somewhere between 512K and 2MB. We
1425          * need to divide this up a) between the transmitter and
1426          * receiver and b) between the two XMACs, if this is a
1427          * dual port NIC. Our algotithm is to divide up the memory
1428          * evenly so that everyone gets a fair share.
1429          */
1430         if (sk_win_read_1(sc, SK_CONFIG) & SK_CONFIG_SINGLEMAC) {
1431                 u_int32_t               chunk, val;
1432
1433                 chunk = sc->sk_ramsize / 2;
1434                 val = sc->sk_rboff / sizeof(u_int64_t);
1435                 sc_if->sk_rx_ramstart = val;
1436                 val += (chunk / sizeof(u_int64_t));
1437                 sc_if->sk_rx_ramend = val - 1;
1438                 sc_if->sk_tx_ramstart = val;
1439                 val += (chunk / sizeof(u_int64_t));
1440                 sc_if->sk_tx_ramend = val - 1;
1441         } else {
1442                 u_int32_t               chunk, val;
1443
1444                 chunk = sc->sk_ramsize / 4;
1445                 val = (sc->sk_rboff + (chunk * 2 * sc_if->sk_port)) /
1446                     sizeof(u_int64_t);
1447                 sc_if->sk_rx_ramstart = val;
1448                 val += (chunk / sizeof(u_int64_t));
1449                 sc_if->sk_rx_ramend = val - 1;
1450                 sc_if->sk_tx_ramstart = val;
1451                 val += (chunk / sizeof(u_int64_t));
1452                 sc_if->sk_tx_ramend = val - 1;
1453         }
1454
1455         /* Read and save PHY type and set PHY address */
1456         sc_if->sk_phytype = sk_win_read_1(sc, SK_EPROM1) & 0xF;
1457         switch(sc_if->sk_phytype) {
1458         case SK_PHYTYPE_XMAC:
1459                 sc_if->sk_phyaddr = SK_PHYADDR_XMAC;
1460                 break;
1461         case SK_PHYTYPE_BCOM:
1462                 sc_if->sk_phyaddr = SK_PHYADDR_BCOM;
1463                 break;
1464         case SK_PHYTYPE_MARV_COPPER:
1465                 sc_if->sk_phyaddr = SK_PHYADDR_MARV;
1466                 break;
1467         default:
1468                 printf("skc%d: unsupported PHY type: %d\n",
1469                     sc->sk_unit, sc_if->sk_phytype);
1470                 return(ENODEV);
1471         }
1472
1473         /* Allocate the descriptor queues. */
1474         sc_if->sk_rdata = contigmalloc(sizeof(struct sk_ring_data), M_DEVBUF,
1475             M_NOWAIT, 0, 0xffffffff, PAGE_SIZE, 0);
1476
1477         if (sc_if->sk_rdata == NULL) {
1478                 printf("sk%d: no memory for list buffers!\n", sc_if->sk_unit);
1479                 sc->sk_if[port] = NULL;
1480                 return(ENOMEM);
1481         }
1482
1483         bzero(sc_if->sk_rdata, sizeof(struct sk_ring_data));
1484
1485         /* Try to allocate memory for jumbo buffers. */
1486         if (sk_alloc_jumbo_mem(sc_if)) {
1487                 printf("sk%d: jumbo buffer allocation failed\n",
1488                     sc_if->sk_unit);
1489                 contigfree(sc_if->sk_rdata,
1490                     sizeof(struct sk_ring_data), M_DEVBUF);
1491                 sc->sk_if[port] = NULL;
1492                 return(ENOMEM);
1493         }
1494
1495         ifp = &sc_if->arpcom.ac_if;
1496         ifp->if_softc = sc_if;
1497         if_initname(ifp, "sk", sc_if->sk_unit);
1498         ifp->if_mtu = ETHERMTU;
1499         ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST;
1500         ifp->if_ioctl = sk_ioctl;
1501         ifp->if_start = sk_start;
1502         ifp->if_watchdog = sk_watchdog;
1503         ifp->if_init = sk_init;
1504         ifp->if_baudrate = 1000000000;
1505         ifp->if_snd.ifq_maxlen = SK_TX_RING_CNT - 1;
1506
1507         /*
1508          * Do miibus setup.
1509          */
1510         switch (sc->sk_type) {
1511         case SK_GENESIS:
1512                 sk_init_xmac(sc_if);
1513                 break;
1514         case SK_YUKON:
1515                 sk_init_yukon(sc_if);
1516                 break;
1517         }
1518
1519         if (mii_phy_probe(dev, &sc_if->sk_miibus,
1520             sk_ifmedia_upd, sk_ifmedia_sts)) {
1521                 printf("skc%d: no PHY found!\n", sc_if->sk_unit);
1522                 contigfree(sc_if->sk_cdata.sk_jumbo_buf, SK_JMEM,
1523                     M_DEVBUF);
1524                 contigfree(sc_if->sk_rdata,
1525                     sizeof(struct sk_ring_data), M_DEVBUF);
1526                 return(ENXIO);
1527         }
1528
1529         /*
1530          * Call MI attach routine.
1531          */
1532         ether_ifattach(ifp, sc_if->arpcom.ac_enaddr);
1533         callout_init(&sc_if->sk_tick_timer);
1534
1535         return(0);
1536 }
1537
1538 /*
1539  * Attach the interface. Allocate softc structures, do ifmedia
1540  * setup and ethernet/BPF attach.
1541  */
1542 static int skc_attach(dev)
1543         device_t                dev;
1544 {
1545         int                     s;
1546         u_int32_t               command;
1547         struct sk_softc         *sc;
1548         int                     unit, error = 0, rid, *port;
1549
1550         s = splimp();
1551
1552         sc = device_get_softc(dev);
1553         unit = device_get_unit(dev);
1554         bzero(sc, sizeof(struct sk_softc));
1555         switch (pci_get_device(dev)) {
1556         case DEVICEID_SK_V1:
1557                 sc->sk_type = SK_GENESIS;
1558                 break;
1559         case DEVICEID_SK_V2:
1560         case DEVICEID_3COM_3C940:
1561         case DEVICEID_LINKSYS_EG1032:
1562         case DEVICEID_DLINK_DGE530T:
1563                 sc->sk_type = SK_YUKON;
1564                 break;
1565         }
1566
1567         /*
1568          * Handle power management nonsense.
1569          */
1570         command = pci_read_config(dev, SK_PCI_CAPID, 4) & 0x000000FF;
1571         if (command == 0x01) {
1572                 command = pci_read_config(dev, SK_PCI_PWRMGMTCTRL, 4);
1573                 if (command & SK_PSTATE_MASK) {
1574                         u_int32_t               iobase, membase, irq;
1575
1576                         /* Save important PCI config data. */
1577                         iobase = pci_read_config(dev, SK_PCI_LOIO, 4);
1578                         membase = pci_read_config(dev, SK_PCI_LOMEM, 4);
1579                         irq = pci_read_config(dev, SK_PCI_INTLINE, 4);
1580
1581                         /* Reset the power state. */
1582                         printf("skc%d: chip is in D%d power mode "
1583                         "-- setting to D0\n", unit, command & SK_PSTATE_MASK);
1584                         command &= 0xFFFFFFFC;
1585                         pci_write_config(dev, SK_PCI_PWRMGMTCTRL, command, 4);
1586
1587                         /* Restore PCI config data. */
1588                         pci_write_config(dev, SK_PCI_LOIO, iobase, 4);
1589                         pci_write_config(dev, SK_PCI_LOMEM, membase, 4);
1590                         pci_write_config(dev, SK_PCI_INTLINE, irq, 4);
1591                 }
1592         }
1593
1594         /*
1595          * Map control/status registers.
1596          */
1597         command = pci_read_config(dev, PCIR_COMMAND, 4);
1598         command |= (PCIM_CMD_PORTEN|PCIM_CMD_MEMEN|PCIM_CMD_BUSMASTEREN);
1599         pci_write_config(dev, PCIR_COMMAND, command, 4);
1600         command = pci_read_config(dev, PCIR_COMMAND, 4);
1601
1602 #ifdef SK_USEIOSPACE
1603         if (!(command & PCIM_CMD_PORTEN)) {
1604                 printf("skc%d: failed to enable I/O ports!\n", unit);
1605                 error = ENXIO;
1606                 goto fail;
1607         }
1608 #else
1609         if (!(command & PCIM_CMD_MEMEN)) {
1610                 printf("skc%d: failed to enable memory mapping!\n", unit);
1611                 error = ENXIO;
1612                 goto fail;
1613         }
1614 #endif
1615
1616         rid = SK_RID;
1617         sc->sk_res = bus_alloc_resource(dev, SK_RES, &rid,
1618             0, ~0, 1, RF_ACTIVE);
1619
1620         if (sc->sk_res == NULL) {
1621                 printf("sk%d: couldn't map ports/memory\n", unit);
1622                 error = ENXIO;
1623                 goto fail;
1624         }
1625
1626         sc->sk_btag = rman_get_bustag(sc->sk_res);
1627         sc->sk_bhandle = rman_get_bushandle(sc->sk_res);
1628
1629         /* Allocate interrupt */
1630         rid = 0;
1631         sc->sk_irq = bus_alloc_resource(dev, SYS_RES_IRQ, &rid, 0, ~0, 1,
1632             RF_SHAREABLE | RF_ACTIVE);
1633
1634         if (sc->sk_irq == NULL) {
1635                 printf("skc%d: couldn't map interrupt\n", unit);
1636                 bus_release_resource(dev, SK_RES, SK_RID, sc->sk_res);
1637                 error = ENXIO;
1638                 goto fail;
1639         }
1640
1641         error = bus_setup_intr(dev, sc->sk_irq, INTR_TYPE_NET,
1642             sk_intr, sc, &sc->sk_intrhand);
1643
1644         if (error) {
1645                 printf("skc%d: couldn't set up irq\n", unit);
1646                 bus_release_resource(dev, SK_RES, SK_RID, sc->sk_res);
1647                 bus_release_resource(dev, SYS_RES_IRQ, 0, sc->sk_irq);
1648                 goto fail;
1649         }
1650
1651         /* Reset the adapter. */
1652         sk_reset(sc);
1653
1654         sc->sk_unit = unit;
1655
1656         /* Read and save vital product data from EEPROM. */
1657         sk_vpd_read(sc);
1658
1659         if (sc->sk_type == SK_GENESIS) {
1660                 /* Read and save RAM size and RAMbuffer offset */
1661                 switch(sk_win_read_1(sc, SK_EPROM0)) {
1662                 case SK_RAMSIZE_512K_64:
1663                         sc->sk_ramsize = 0x80000;
1664                         sc->sk_rboff = SK_RBOFF_0;
1665                         break;
1666                 case SK_RAMSIZE_1024K_64:
1667                         sc->sk_ramsize = 0x100000;
1668                         sc->sk_rboff = SK_RBOFF_80000;
1669                         break;
1670                 case SK_RAMSIZE_1024K_128:
1671                         sc->sk_ramsize = 0x100000;
1672                         sc->sk_rboff = SK_RBOFF_0;
1673                         break;
1674                 case SK_RAMSIZE_2048K_128:
1675                         sc->sk_ramsize = 0x200000;
1676                         sc->sk_rboff = SK_RBOFF_0;
1677                         break;
1678                 default:
1679                         printf("skc%d: unknown ram size: %d\n",
1680                             sc->sk_unit, sk_win_read_1(sc, SK_EPROM0));
1681                         bus_teardown_intr(dev, sc->sk_irq, sc->sk_intrhand);
1682                         bus_release_resource(dev, SYS_RES_IRQ, 0, sc->sk_irq);
1683                         bus_release_resource(dev, SK_RES, SK_RID, sc->sk_res);
1684                         error = ENXIO;
1685                         goto fail;
1686                         break;
1687                 }
1688         } else {
1689                 sc->sk_ramsize = 0x20000;
1690                 sc->sk_rboff = SK_RBOFF_0;
1691         }
1692
1693         /* Read and save physical media type */
1694         switch(sk_win_read_1(sc, SK_PMDTYPE)) {
1695         case SK_PMD_1000BASESX:
1696                 sc->sk_pmd = IFM_1000_SX;
1697                 break;
1698         case SK_PMD_1000BASELX:
1699                 sc->sk_pmd = IFM_1000_LX;
1700                 break;
1701         case SK_PMD_1000BASECX:
1702                 sc->sk_pmd = IFM_1000_CX;
1703                 break;
1704         case SK_PMD_1000BASETX:
1705                 sc->sk_pmd = IFM_1000_TX;
1706                 break;
1707         default:
1708                 printf("skc%d: unknown media type: 0x%x\n",
1709                     sc->sk_unit, sk_win_read_1(sc, SK_PMDTYPE));
1710                 bus_teardown_intr(dev, sc->sk_irq, sc->sk_intrhand);
1711                 bus_release_resource(dev, SYS_RES_IRQ, 0, sc->sk_irq);
1712                 bus_release_resource(dev, SK_RES, SK_RID, sc->sk_res);
1713                 error = ENXIO;
1714                 goto fail;
1715         }
1716
1717         /* Announce the product name. */
1718         printf("skc%d: %s\n", sc->sk_unit, sc->sk_vpd_prodname);
1719         sc->sk_devs[SK_PORT_A] = device_add_child(dev, "sk", -1);
1720         port = malloc(sizeof(int), M_DEVBUF, M_WAITOK);
1721         *port = SK_PORT_A;
1722         device_set_ivars(sc->sk_devs[SK_PORT_A], port);
1723
1724         if (!(sk_win_read_1(sc, SK_CONFIG) & SK_CONFIG_SINGLEMAC)) {
1725                 sc->sk_devs[SK_PORT_B] = device_add_child(dev, "sk", -1);
1726                 port = malloc(sizeof(int), M_DEVBUF, M_WAITOK);
1727                 *port = SK_PORT_B;
1728                 device_set_ivars(sc->sk_devs[SK_PORT_B], port);
1729         }
1730
1731         /* Turn on the 'driver is loaded' LED. */
1732         CSR_WRITE_2(sc, SK_LED, SK_LED_GREEN_ON);
1733
1734         bus_generic_attach(dev);
1735
1736 fail:
1737         splx(s);
1738         return(error);
1739 }
1740
1741 static int sk_detach(dev)
1742         device_t                dev;
1743 {
1744         struct sk_softc         *sc;
1745         struct sk_if_softc      *sc_if;
1746         struct ifnet            *ifp;
1747         int                     s;
1748
1749         s = splimp();
1750
1751         sc = device_get_softc(device_get_parent(dev));
1752         sc_if = device_get_softc(dev);
1753         ifp = &sc_if->arpcom.ac_if;
1754         sk_stop(sc_if);
1755         ether_ifdetach(ifp);
1756         bus_generic_detach(dev);
1757         if (sc_if->sk_miibus != NULL)
1758                 device_delete_child(dev, sc_if->sk_miibus);
1759         contigfree(sc_if->sk_cdata.sk_jumbo_buf, SK_JMEM, M_DEVBUF);
1760         contigfree(sc_if->sk_rdata, sizeof(struct sk_ring_data), M_DEVBUF);
1761
1762         return(0);
1763 }
1764
1765 static int skc_detach(dev)
1766         device_t                dev;
1767 {
1768         struct sk_softc         *sc;
1769         int                     s;
1770
1771         s = splimp();
1772
1773         sc = device_get_softc(dev);
1774
1775         bus_generic_detach(dev);
1776         if (sc->sk_devs[SK_PORT_A] != NULL)
1777                 device_delete_child(dev, sc->sk_devs[SK_PORT_A]);
1778         if (sc->sk_devs[SK_PORT_B] != NULL)
1779                 device_delete_child(dev, sc->sk_devs[SK_PORT_B]);
1780
1781         bus_teardown_intr(dev, sc->sk_irq, sc->sk_intrhand);
1782         bus_release_resource(dev, SYS_RES_IRQ, 0, sc->sk_irq);
1783         bus_release_resource(dev, SK_RES, SK_RID, sc->sk_res);
1784
1785         splx(s);
1786
1787         return(0);
1788 }
1789
1790 static int sk_encap(sc_if, m_head, txidx)
1791         struct sk_if_softc      *sc_if;
1792         struct mbuf             *m_head;
1793         u_int32_t               *txidx;
1794 {
1795         struct sk_tx_desc       *f = NULL;
1796         struct mbuf             *m;
1797         u_int32_t               frag, cur, cnt = 0;
1798
1799         m = m_head;
1800         cur = frag = *txidx;
1801
1802         /*
1803          * Start packing the mbufs in this chain into
1804          * the fragment pointers. Stop when we run out
1805          * of fragments or hit the end of the mbuf chain.
1806          */
1807         for (m = m_head; m != NULL; m = m->m_next) {
1808                 if (m->m_len != 0) {
1809                         if ((SK_TX_RING_CNT -
1810                             (sc_if->sk_cdata.sk_tx_cnt + cnt)) < 2)
1811                                 return(ENOBUFS);
1812                         f = &sc_if->sk_rdata->sk_tx_ring[frag];
1813                         f->sk_data_lo = vtophys(mtod(m, vm_offset_t));
1814                         f->sk_ctl = m->m_len | SK_OPCODE_DEFAULT;
1815                         if (cnt == 0)
1816                                 f->sk_ctl |= SK_TXCTL_FIRSTFRAG;
1817                         else
1818                                 f->sk_ctl |= SK_TXCTL_OWN;
1819                         cur = frag;
1820                         SK_INC(frag, SK_TX_RING_CNT);
1821                         cnt++;
1822                 }
1823         }
1824
1825         if (m != NULL)
1826                 return(ENOBUFS);
1827
1828         sc_if->sk_rdata->sk_tx_ring[cur].sk_ctl |=
1829                 SK_TXCTL_LASTFRAG|SK_TXCTL_EOF_INTR;
1830         sc_if->sk_cdata.sk_tx_chain[cur].sk_mbuf = m_head;
1831         sc_if->sk_rdata->sk_tx_ring[*txidx].sk_ctl |= SK_TXCTL_OWN;
1832         sc_if->sk_cdata.sk_tx_cnt += cnt;
1833
1834         *txidx = frag;
1835
1836         return(0);
1837 }
1838
1839 static void sk_start(ifp)
1840         struct ifnet            *ifp;
1841 {
1842         struct sk_softc         *sc;
1843         struct sk_if_softc      *sc_if;
1844         struct mbuf             *m_head = NULL;
1845         u_int32_t               idx;
1846
1847         sc_if = ifp->if_softc;
1848         sc = sc_if->sk_softc;
1849
1850         idx = sc_if->sk_cdata.sk_tx_prod;
1851
1852         while(sc_if->sk_cdata.sk_tx_chain[idx].sk_mbuf == NULL) {
1853                 IF_DEQUEUE(&ifp->if_snd, m_head);
1854                 if (m_head == NULL)
1855                         break;
1856
1857                 /*
1858                  * Pack the data into the transmit ring. If we
1859                  * don't have room, set the OACTIVE flag and wait
1860                  * for the NIC to drain the ring.
1861                  */
1862                 if (sk_encap(sc_if, m_head, &idx)) {
1863                         IF_PREPEND(&ifp->if_snd, m_head);
1864                         ifp->if_flags |= IFF_OACTIVE;
1865                         break;
1866                 }
1867
1868                 /*
1869                  * If there's a BPF listener, bounce a copy of this frame
1870                  * to him.
1871                  */
1872                 if (ifp->if_bpf)
1873                         bpf_mtap(ifp, m_head);
1874         }
1875
1876         /* Transmit */
1877         sc_if->sk_cdata.sk_tx_prod = idx;
1878         CSR_WRITE_4(sc, sc_if->sk_tx_bmu, SK_TXBMU_TX_START);
1879
1880         /* Set a timeout in case the chip goes out to lunch. */
1881         ifp->if_timer = 5;
1882
1883         return;
1884 }
1885
1886
1887 static void sk_watchdog(ifp)
1888         struct ifnet            *ifp;
1889 {
1890         struct sk_if_softc      *sc_if;
1891
1892         sc_if = ifp->if_softc;
1893
1894         printf("sk%d: watchdog timeout\n", sc_if->sk_unit);
1895         sk_init(sc_if);
1896
1897         return;
1898 }
1899
1900 static void skc_shutdown(dev)
1901         device_t                dev;
1902 {
1903         struct sk_softc         *sc;
1904
1905         sc = device_get_softc(dev);
1906
1907         /* Turn off the 'driver is loaded' LED. */
1908         CSR_WRITE_2(sc, SK_LED, SK_LED_GREEN_OFF);
1909
1910         /*
1911          * Reset the GEnesis controller. Doing this should also
1912          * assert the resets on the attached XMAC(s).
1913          */
1914         sk_reset(sc);
1915
1916         return;
1917 }
1918
1919 static void sk_rxeof(sc_if)
1920         struct sk_if_softc      *sc_if;
1921 {
1922         struct mbuf             *m;
1923         struct ifnet            *ifp;
1924         struct sk_chain         *cur_rx;
1925         int                     total_len = 0;
1926         int                     i;
1927         u_int32_t               rxstat;
1928
1929         ifp = &sc_if->arpcom.ac_if;
1930         i = sc_if->sk_cdata.sk_rx_prod;
1931         cur_rx = &sc_if->sk_cdata.sk_rx_chain[i];
1932
1933         while(!(sc_if->sk_rdata->sk_rx_ring[i].sk_ctl & SK_RXCTL_OWN)) {
1934
1935                 cur_rx = &sc_if->sk_cdata.sk_rx_chain[i];
1936                 rxstat = sc_if->sk_rdata->sk_rx_ring[i].sk_xmac_rxstat;
1937                 m = cur_rx->sk_mbuf;
1938                 cur_rx->sk_mbuf = NULL;
1939                 total_len = SK_RXBYTES(sc_if->sk_rdata->sk_rx_ring[i].sk_ctl);
1940                 SK_INC(i, SK_RX_RING_CNT);
1941
1942                 if (rxstat & XM_RXSTAT_ERRFRAME) {
1943                         ifp->if_ierrors++;
1944                         sk_newbuf(sc_if, cur_rx, m);
1945                         continue;
1946                 }
1947
1948                 /*
1949                  * Try to allocate a new jumbo buffer. If that
1950                  * fails, copy the packet to mbufs and put the
1951                  * jumbo buffer back in the ring so it can be
1952                  * re-used. If allocating mbufs fails, then we
1953                  * have to drop the packet.
1954                  */
1955                 if (sk_newbuf(sc_if, cur_rx, NULL) == ENOBUFS) {
1956                         struct mbuf             *m0;
1957                         m0 = m_devget(mtod(m, char *) - ETHER_ALIGN,
1958                             total_len + ETHER_ALIGN, 0, ifp, NULL);
1959                         sk_newbuf(sc_if, cur_rx, m);
1960                         if (m0 == NULL) {
1961                                 printf("sk%d: no receive buffers "
1962                                     "available -- packet dropped!\n",
1963                                     sc_if->sk_unit);
1964                                 ifp->if_ierrors++;
1965                                 continue;
1966                         }
1967                         m_adj(m0, ETHER_ALIGN);
1968                         m = m0;
1969                 } else {
1970                         m->m_pkthdr.rcvif = ifp;
1971                         m->m_pkthdr.len = m->m_len = total_len;
1972                 }
1973
1974                 ifp->if_ipackets++;
1975                 (*ifp->if_input)(ifp, m);
1976         }
1977
1978         sc_if->sk_cdata.sk_rx_prod = i;
1979
1980         return;
1981 }
1982
1983 static void sk_txeof(sc_if)
1984         struct sk_if_softc      *sc_if;
1985 {
1986         struct sk_tx_desc       *cur_tx = NULL;
1987         struct ifnet            *ifp;
1988         u_int32_t               idx;
1989
1990         ifp = &sc_if->arpcom.ac_if;
1991
1992         /*
1993          * Go through our tx ring and free mbufs for those
1994          * frames that have been sent.
1995          */
1996         idx = sc_if->sk_cdata.sk_tx_cons;
1997         while(idx != sc_if->sk_cdata.sk_tx_prod) {
1998                 cur_tx = &sc_if->sk_rdata->sk_tx_ring[idx];
1999                 if (cur_tx->sk_ctl & SK_TXCTL_OWN)
2000                         break;
2001                 if (cur_tx->sk_ctl & SK_TXCTL_LASTFRAG)
2002                         ifp->if_opackets++;
2003                 if (sc_if->sk_cdata.sk_tx_chain[idx].sk_mbuf != NULL) {
2004                         m_freem(sc_if->sk_cdata.sk_tx_chain[idx].sk_mbuf);
2005                         sc_if->sk_cdata.sk_tx_chain[idx].sk_mbuf = NULL;
2006                 }
2007                 sc_if->sk_cdata.sk_tx_cnt--;
2008                 SK_INC(idx, SK_TX_RING_CNT);
2009                 ifp->if_timer = 0;
2010         }
2011
2012         sc_if->sk_cdata.sk_tx_cons = idx;
2013
2014         if (cur_tx != NULL)
2015                 ifp->if_flags &= ~IFF_OACTIVE;
2016
2017         return;
2018 }
2019
2020 static void sk_tick(xsc_if)
2021         void                    *xsc_if;
2022 {
2023         struct sk_if_softc      *sc_if;
2024         struct mii_data         *mii;
2025         struct ifnet            *ifp;
2026         int                     i;
2027
2028         sc_if = xsc_if;
2029         ifp = &sc_if->arpcom.ac_if;
2030         mii = device_get_softc(sc_if->sk_miibus);
2031
2032         if (!(ifp->if_flags & IFF_UP))
2033                 return;
2034
2035         if (sc_if->sk_phytype == SK_PHYTYPE_BCOM) {
2036                 sk_intr_bcom(sc_if);
2037                 return;
2038         }
2039
2040         /*
2041          * According to SysKonnect, the correct way to verify that
2042          * the link has come back up is to poll bit 0 of the GPIO
2043          * register three times. This pin has the signal from the
2044          * link_sync pin connected to it; if we read the same link
2045          * state 3 times in a row, we know the link is up.
2046          */
2047         for (i = 0; i < 3; i++) {
2048                 if (SK_XM_READ_2(sc_if, XM_GPIO) & XM_GPIO_GP0_SET)
2049                         break;
2050         }
2051
2052         if (i != 3) {
2053                 callout_reset(&sc_if->sk_tick_timer, hz, sk_tick, sc_if);
2054                 return;
2055         }
2056
2057         /* Turn the GP0 interrupt back on. */
2058         SK_XM_CLRBIT_2(sc_if, XM_IMR, XM_IMR_GP0_SET);
2059         SK_XM_READ_2(sc_if, XM_ISR);
2060         mii_tick(mii);
2061         mii_pollstat(mii);
2062         callout_stop(&sc_if->sk_tick_timer);
2063
2064         return;
2065 }
2066
2067 static void sk_intr_bcom(sc_if)
2068         struct sk_if_softc      *sc_if;
2069 {
2070         struct sk_softc         *sc;
2071         struct mii_data         *mii;
2072         struct ifnet            *ifp;
2073         int                     status;
2074
2075         sc = sc_if->sk_softc;
2076         mii = device_get_softc(sc_if->sk_miibus);
2077         ifp = &sc_if->arpcom.ac_if;
2078
2079         SK_XM_CLRBIT_2(sc_if, XM_MMUCMD, XM_MMUCMD_TX_ENB|XM_MMUCMD_RX_ENB);
2080
2081         /*
2082          * Read the PHY interrupt register to make sure
2083          * we clear any pending interrupts.
2084          */
2085         status = sk_xmac_miibus_readreg(sc_if, SK_PHYADDR_BCOM, BRGPHY_MII_ISR);
2086
2087         if (!(ifp->if_flags & IFF_RUNNING)) {
2088                 sk_init_xmac(sc_if);
2089                 return;
2090         }
2091
2092         if (status & (BRGPHY_ISR_LNK_CHG|BRGPHY_ISR_AN_PR)) {
2093                 int                     lstat;
2094                 lstat = sk_xmac_miibus_readreg(sc_if, SK_PHYADDR_BCOM,
2095                     BRGPHY_MII_AUXSTS);
2096
2097                 if (!(lstat & BRGPHY_AUXSTS_LINK) && sc_if->sk_link) {
2098                         mii_mediachg(mii);
2099                         /* Turn off the link LED. */
2100                         SK_IF_WRITE_1(sc_if, 0,
2101                             SK_LINKLED1_CTL, SK_LINKLED_OFF);
2102                         sc_if->sk_link = 0;
2103                 } else if (status & BRGPHY_ISR_LNK_CHG) {
2104                         sk_xmac_miibus_writereg(sc_if, SK_PHYADDR_BCOM,
2105                             BRGPHY_MII_IMR, 0xFF00);
2106                         mii_tick(mii);
2107                         sc_if->sk_link = 1;
2108                         /* Turn on the link LED. */
2109                         SK_IF_WRITE_1(sc_if, 0, SK_LINKLED1_CTL,
2110                             SK_LINKLED_ON|SK_LINKLED_LINKSYNC_OFF|
2111                             SK_LINKLED_BLINK_OFF);
2112                         mii_pollstat(mii);
2113                 } else {
2114                         mii_tick(mii);
2115                         callout_reset(&sc_if->sk_tick_timer, hz,
2116                                       sk_tick, sc_if);
2117                 }
2118         }
2119
2120         SK_XM_SETBIT_2(sc_if, XM_MMUCMD, XM_MMUCMD_TX_ENB|XM_MMUCMD_RX_ENB);
2121
2122         return;
2123 }
2124
2125 static void sk_intr_xmac(sc_if)
2126         struct sk_if_softc      *sc_if;
2127 {
2128         struct sk_softc         *sc;
2129         u_int16_t               status;
2130         struct mii_data         *mii;
2131
2132         sc = sc_if->sk_softc;
2133         mii = device_get_softc(sc_if->sk_miibus);
2134         status = SK_XM_READ_2(sc_if, XM_ISR);
2135
2136         /*
2137          * Link has gone down. Start MII tick timeout to
2138          * watch for link resync.
2139          */
2140         if (sc_if->sk_phytype == SK_PHYTYPE_XMAC) {
2141                 if (status & XM_ISR_GP0_SET) {
2142                         SK_XM_SETBIT_2(sc_if, XM_IMR, XM_IMR_GP0_SET);
2143                         callout_reset(&sc_if->sk_tick_timer, hz,
2144                                       sk_tick, sc_if);
2145                 }
2146
2147                 if (status & XM_ISR_AUTONEG_DONE) {
2148                         callout_reset(&sc_if->sk_tick_timer, hz,
2149                                       sk_tick, sc_if);
2150                 }
2151         }
2152
2153         if (status & XM_IMR_TX_UNDERRUN)
2154                 SK_XM_SETBIT_4(sc_if, XM_MODE, XM_MODE_FLUSH_TXFIFO);
2155
2156         if (status & XM_IMR_RX_OVERRUN)
2157                 SK_XM_SETBIT_4(sc_if, XM_MODE, XM_MODE_FLUSH_RXFIFO);
2158
2159         status = SK_XM_READ_2(sc_if, XM_ISR);
2160
2161         return;
2162 }
2163
2164 static void sk_intr_yukon(sc_if)
2165         struct sk_if_softc      *sc_if;
2166 {
2167         int status;
2168
2169         status = SK_IF_READ_2(sc_if, 0, SK_GMAC_ISR);
2170
2171         return;
2172 }
2173
2174 static void sk_intr(xsc)
2175         void                    *xsc;
2176 {
2177         struct sk_softc         *sc = xsc;
2178         struct sk_if_softc      *sc_if0 = NULL, *sc_if1 = NULL;
2179         struct ifnet            *ifp0 = NULL, *ifp1 = NULL;
2180         u_int32_t               status;
2181
2182         sc_if0 = sc->sk_if[SK_PORT_A];
2183         sc_if1 = sc->sk_if[SK_PORT_B];
2184
2185         if (sc_if0 != NULL)
2186                 ifp0 = &sc_if0->arpcom.ac_if;
2187         if (sc_if1 != NULL)
2188                 ifp1 = &sc_if1->arpcom.ac_if;
2189
2190         for (;;) {
2191                 status = CSR_READ_4(sc, SK_ISSR);
2192                 if (!(status & sc->sk_intrmask))
2193                         break;
2194
2195                 /* Handle receive interrupts first. */
2196                 if (status & SK_ISR_RX1_EOF) {
2197                         sk_rxeof(sc_if0);
2198                         CSR_WRITE_4(sc, SK_BMU_RX_CSR0,
2199                             SK_RXBMU_CLR_IRQ_EOF|SK_RXBMU_RX_START);
2200                 }
2201                 if (status & SK_ISR_RX2_EOF) {
2202                         sk_rxeof(sc_if1);
2203                         CSR_WRITE_4(sc, SK_BMU_RX_CSR1,
2204                             SK_RXBMU_CLR_IRQ_EOF|SK_RXBMU_RX_START);
2205                 }
2206
2207                 /* Then transmit interrupts. */
2208                 if (status & SK_ISR_TX1_S_EOF) {
2209                         sk_txeof(sc_if0);
2210                         CSR_WRITE_4(sc, SK_BMU_TXS_CSR0,
2211                             SK_TXBMU_CLR_IRQ_EOF);
2212                 }
2213                 if (status & SK_ISR_TX2_S_EOF) {
2214                         sk_txeof(sc_if1);
2215                         CSR_WRITE_4(sc, SK_BMU_TXS_CSR1,
2216                             SK_TXBMU_CLR_IRQ_EOF);
2217                 }
2218
2219                 /* Then MAC interrupts. */
2220                 if (status & SK_ISR_MAC1 && ifp0->if_flags & IFF_RUNNING) {
2221                         if (sc->sk_type == SK_GENESIS)
2222                                 sk_intr_xmac(sc_if0);
2223                         else
2224                                 sk_intr_yukon(sc_if0);
2225                 }
2226
2227                 if (status & SK_ISR_MAC2 && ifp1->if_flags & IFF_RUNNING) {
2228                         if (sc->sk_type == SK_GENESIS)
2229                                 sk_intr_xmac(sc_if1);
2230                         else
2231                                 sk_intr_yukon(sc_if0);
2232                 }
2233
2234                 if (status & SK_ISR_EXTERNAL_REG) {
2235                         if (ifp0 != NULL &&
2236                             sc_if0->sk_phytype == SK_PHYTYPE_BCOM)
2237                                 sk_intr_bcom(sc_if0);
2238                         if (ifp1 != NULL &&
2239                             sc_if1->sk_phytype == SK_PHYTYPE_BCOM)
2240                                 sk_intr_bcom(sc_if1);
2241                 }
2242         }
2243
2244         CSR_WRITE_4(sc, SK_IMR, sc->sk_intrmask);
2245
2246         if (ifp0 != NULL && ifp0->if_snd.ifq_head != NULL)
2247                 sk_start(ifp0);
2248         if (ifp1 != NULL && ifp1->if_snd.ifq_head != NULL)
2249                 sk_start(ifp1);
2250
2251         return;
2252 }
2253
2254 static void sk_init_xmac(sc_if)
2255         struct sk_if_softc      *sc_if;
2256 {
2257         struct sk_softc         *sc;
2258         struct ifnet            *ifp;
2259         struct sk_bcom_hack     bhack[] = {
2260         { 0x18, 0x0c20 }, { 0x17, 0x0012 }, { 0x15, 0x1104 }, { 0x17, 0x0013 },
2261         { 0x15, 0x0404 }, { 0x17, 0x8006 }, { 0x15, 0x0132 }, { 0x17, 0x8006 },
2262         { 0x15, 0x0232 }, { 0x17, 0x800D }, { 0x15, 0x000F }, { 0x18, 0x0420 },
2263         { 0, 0 } };
2264
2265         sc = sc_if->sk_softc;
2266         ifp = &sc_if->arpcom.ac_if;
2267
2268         /* Unreset the XMAC. */
2269         SK_IF_WRITE_2(sc_if, 0, SK_TXF1_MACCTL, SK_TXMACCTL_XMAC_UNRESET);
2270         DELAY(1000);
2271
2272         /* Reset the XMAC's internal state. */
2273         SK_XM_SETBIT_2(sc_if, XM_GPIO, XM_GPIO_RESETMAC);
2274
2275         /* Save the XMAC II revision */
2276         sc_if->sk_xmac_rev = XM_XMAC_REV(SK_XM_READ_4(sc_if, XM_DEVID));
2277
2278         /*
2279          * Perform additional initialization for external PHYs,
2280          * namely for the 1000baseTX cards that use the XMAC's
2281          * GMII mode.
2282          */
2283         if (sc_if->sk_phytype == SK_PHYTYPE_BCOM) {
2284                 int                     i = 0;
2285                 u_int32_t               val;
2286
2287                 /* Take PHY out of reset. */
2288                 val = sk_win_read_4(sc, SK_GPIO);
2289                 if (sc_if->sk_port == SK_PORT_A)
2290                         val |= SK_GPIO_DIR0|SK_GPIO_DAT0;
2291                 else
2292                         val |= SK_GPIO_DIR2|SK_GPIO_DAT2;
2293                 sk_win_write_4(sc, SK_GPIO, val);
2294
2295                 /* Enable GMII mode on the XMAC. */
2296                 SK_XM_SETBIT_2(sc_if, XM_HWCFG, XM_HWCFG_GMIIMODE);
2297
2298                 sk_xmac_miibus_writereg(sc_if, SK_PHYADDR_BCOM,
2299                     BRGPHY_MII_BMCR, BRGPHY_BMCR_RESET);
2300                 DELAY(10000);
2301                 sk_xmac_miibus_writereg(sc_if, SK_PHYADDR_BCOM,
2302                     BRGPHY_MII_IMR, 0xFFF0);
2303
2304                 /*
2305                  * Early versions of the BCM5400 apparently have
2306                  * a bug that requires them to have their reserved
2307                  * registers initialized to some magic values. I don't
2308                  * know what the numbers do, I'm just the messenger.
2309                  */
2310                 if (sk_xmac_miibus_readreg(sc_if, SK_PHYADDR_BCOM, 0x03)
2311                     == 0x6041) {
2312                         while(bhack[i].reg) {
2313                                 sk_xmac_miibus_writereg(sc_if, SK_PHYADDR_BCOM,
2314                                     bhack[i].reg, bhack[i].val);
2315                                 i++;
2316                         }
2317                 }
2318         }
2319
2320         /* Set station address */
2321         SK_XM_WRITE_2(sc_if, XM_PAR0,
2322             *(u_int16_t *)(&sc_if->arpcom.ac_enaddr[0]));
2323         SK_XM_WRITE_2(sc_if, XM_PAR1,
2324             *(u_int16_t *)(&sc_if->arpcom.ac_enaddr[2]));
2325         SK_XM_WRITE_2(sc_if, XM_PAR2,
2326             *(u_int16_t *)(&sc_if->arpcom.ac_enaddr[4]));
2327         SK_XM_SETBIT_4(sc_if, XM_MODE, XM_MODE_RX_USE_STATION);
2328
2329         if (ifp->if_flags & IFF_BROADCAST) {
2330                 SK_XM_CLRBIT_4(sc_if, XM_MODE, XM_MODE_RX_NOBROAD);
2331         } else {
2332                 SK_XM_SETBIT_4(sc_if, XM_MODE, XM_MODE_RX_NOBROAD);
2333         }
2334
2335         /* We don't need the FCS appended to the packet. */
2336         SK_XM_SETBIT_2(sc_if, XM_RXCMD, XM_RXCMD_STRIPFCS);
2337
2338         /* We want short frames padded to 60 bytes. */
2339         SK_XM_SETBIT_2(sc_if, XM_TXCMD, XM_TXCMD_AUTOPAD);
2340
2341         /*
2342          * Enable the reception of all error frames. This is is
2343          * a necessary evil due to the design of the XMAC. The
2344          * XMAC's receive FIFO is only 8K in size, however jumbo
2345          * frames can be up to 9000 bytes in length. When bad
2346          * frame filtering is enabled, the XMAC's RX FIFO operates
2347          * in 'store and forward' mode. For this to work, the
2348          * entire frame has to fit into the FIFO, but that means
2349          * that jumbo frames larger than 8192 bytes will be
2350          * truncated. Disabling all bad frame filtering causes
2351          * the RX FIFO to operate in streaming mode, in which
2352          * case the XMAC will start transfering frames out of the
2353          * RX FIFO as soon as the FIFO threshold is reached.
2354          */
2355         SK_XM_SETBIT_4(sc_if, XM_MODE, XM_MODE_RX_BADFRAMES|
2356             XM_MODE_RX_GIANTS|XM_MODE_RX_RUNTS|XM_MODE_RX_CRCERRS|
2357             XM_MODE_RX_INRANGELEN);
2358
2359         if (ifp->if_mtu > (ETHERMTU + ETHER_HDR_LEN + ETHER_CRC_LEN))
2360                 SK_XM_SETBIT_2(sc_if, XM_RXCMD, XM_RXCMD_BIGPKTOK);
2361         else
2362                 SK_XM_CLRBIT_2(sc_if, XM_RXCMD, XM_RXCMD_BIGPKTOK);
2363
2364         /*
2365          * Bump up the transmit threshold. This helps hold off transmit
2366          * underruns when we're blasting traffic from both ports at once.
2367          */
2368         SK_XM_WRITE_2(sc_if, XM_TX_REQTHRESH, SK_XM_TX_FIFOTHRESH);
2369
2370         /* Set promiscuous mode */
2371         sk_setpromisc(sc_if);
2372
2373         /* Set multicast filter */
2374         sk_setmulti(sc_if);
2375
2376         /* Clear and enable interrupts */
2377         SK_XM_READ_2(sc_if, XM_ISR);
2378         if (sc_if->sk_phytype == SK_PHYTYPE_XMAC)
2379                 SK_XM_WRITE_2(sc_if, XM_IMR, XM_INTRS);
2380         else
2381                 SK_XM_WRITE_2(sc_if, XM_IMR, 0xFFFF);
2382
2383         /* Configure MAC arbiter */
2384         switch(sc_if->sk_xmac_rev) {
2385         case XM_XMAC_REV_B2:
2386                 sk_win_write_1(sc, SK_RCINIT_RX1, SK_RCINIT_XMAC_B2);
2387                 sk_win_write_1(sc, SK_RCINIT_TX1, SK_RCINIT_XMAC_B2);
2388                 sk_win_write_1(sc, SK_RCINIT_RX2, SK_RCINIT_XMAC_B2);
2389                 sk_win_write_1(sc, SK_RCINIT_TX2, SK_RCINIT_XMAC_B2);
2390                 sk_win_write_1(sc, SK_MINIT_RX1, SK_MINIT_XMAC_B2);
2391                 sk_win_write_1(sc, SK_MINIT_TX1, SK_MINIT_XMAC_B2);
2392                 sk_win_write_1(sc, SK_MINIT_RX2, SK_MINIT_XMAC_B2);
2393                 sk_win_write_1(sc, SK_MINIT_TX2, SK_MINIT_XMAC_B2);
2394                 sk_win_write_1(sc, SK_RECOVERY_CTL, SK_RECOVERY_XMAC_B2);
2395                 break;
2396         case XM_XMAC_REV_C1:
2397                 sk_win_write_1(sc, SK_RCINIT_RX1, SK_RCINIT_XMAC_C1);
2398                 sk_win_write_1(sc, SK_RCINIT_TX1, SK_RCINIT_XMAC_C1);
2399                 sk_win_write_1(sc, SK_RCINIT_RX2, SK_RCINIT_XMAC_C1);
2400                 sk_win_write_1(sc, SK_RCINIT_TX2, SK_RCINIT_XMAC_C1);
2401                 sk_win_write_1(sc, SK_MINIT_RX1, SK_MINIT_XMAC_C1);
2402                 sk_win_write_1(sc, SK_MINIT_TX1, SK_MINIT_XMAC_C1);
2403                 sk_win_write_1(sc, SK_MINIT_RX2, SK_MINIT_XMAC_C1);
2404                 sk_win_write_1(sc, SK_MINIT_TX2, SK_MINIT_XMAC_C1);
2405                 sk_win_write_1(sc, SK_RECOVERY_CTL, SK_RECOVERY_XMAC_B2);
2406                 break;
2407         default:
2408                 break;
2409         }
2410         sk_win_write_2(sc, SK_MACARB_CTL,
2411             SK_MACARBCTL_UNRESET|SK_MACARBCTL_FASTOE_OFF);
2412
2413         sc_if->sk_link = 1;
2414
2415         return;
2416 }
2417
2418 static void sk_init_yukon(sc_if)
2419         struct sk_if_softc      *sc_if;
2420 {
2421         u_int32_t               phy;
2422         u_int16_t               reg;
2423         int                     i;
2424
2425         /* GMAC and GPHY Reset */
2426         SK_IF_WRITE_4(sc_if, 0, SK_GPHY_CTRL, SK_GPHY_RESET_SET);
2427         SK_IF_WRITE_4(sc_if, 0, SK_GMAC_CTRL, SK_GMAC_RESET_SET);
2428         DELAY(1000);
2429         SK_IF_WRITE_4(sc_if, 0, SK_GMAC_CTRL, SK_GMAC_RESET_CLEAR);
2430         SK_IF_WRITE_4(sc_if, 0, SK_GMAC_CTRL, SK_GMAC_RESET_SET);
2431         DELAY(1000);
2432
2433         phy = SK_GPHY_INT_POL_HI | SK_GPHY_DIS_FC | SK_GPHY_DIS_SLEEP |
2434                 SK_GPHY_ENA_XC | SK_GPHY_ANEG_ALL | SK_GPHY_ENA_PAUSE;
2435
2436         switch(sc_if->sk_softc->sk_pmd) {
2437         case IFM_1000_SX:
2438         case IFM_1000_LX:
2439                 phy |= SK_GPHY_FIBER;
2440                 break;
2441
2442         case IFM_1000_CX:
2443         case IFM_1000_TX:
2444                 phy |= SK_GPHY_COPPER;
2445                 break;
2446         }
2447
2448         SK_IF_WRITE_4(sc_if, 0, SK_GPHY_CTRL, phy | SK_GPHY_RESET_SET);
2449         DELAY(1000);
2450         SK_IF_WRITE_4(sc_if, 0, SK_GPHY_CTRL, phy | SK_GPHY_RESET_CLEAR);
2451         SK_IF_WRITE_4(sc_if, 0, SK_GMAC_CTRL, SK_GMAC_LOOP_OFF |
2452                       SK_GMAC_PAUSE_ON | SK_GMAC_RESET_CLEAR);
2453
2454         /* unused read of the interrupt source register */
2455         SK_IF_READ_2(sc_if, 0, SK_GMAC_ISR);
2456
2457         reg = SK_YU_READ_2(sc_if, YUKON_PAR);
2458
2459         /* MIB Counter Clear Mode set */
2460         reg |= YU_PAR_MIB_CLR;
2461         SK_YU_WRITE_2(sc_if, YUKON_PAR, reg);
2462
2463         /* MIB Counter Clear Mode clear */
2464         reg &= ~YU_PAR_MIB_CLR;
2465         SK_YU_WRITE_2(sc_if, YUKON_PAR, reg);
2466
2467         /* receive control reg */
2468         SK_YU_WRITE_2(sc_if, YUKON_RCR, YU_RCR_CRCR);
2469
2470         /* transmit parameter register */
2471         SK_YU_WRITE_2(sc_if, YUKON_TPR, YU_TPR_JAM_LEN(0x3) |
2472                       YU_TPR_JAM_IPG(0xb) | YU_TPR_JAM2DATA_IPG(0x1a) );
2473
2474         /* serial mode register */
2475         SK_YU_WRITE_2(sc_if, YUKON_SMR, YU_SMR_DATA_BLIND(0x1c) |
2476                       YU_SMR_MFL_VLAN | YU_SMR_IPG_DATA(0x1e));
2477
2478         /* Setup Yukon's address */
2479         for (i = 0; i < 3; i++) {
2480                 /* Write Source Address 1 (unicast filter) */
2481                 SK_YU_WRITE_2(sc_if, YUKON_SAL1 + i * 4,
2482                               sc_if->arpcom.ac_enaddr[i * 2] |
2483                               sc_if->arpcom.ac_enaddr[i * 2 + 1] << 8);
2484         }
2485
2486         for (i = 0; i < 3; i++) {
2487                 reg = sk_win_read_2(sc_if->sk_softc,
2488                                     SK_MAC1_0 + i * 2 + sc_if->sk_port * 8);
2489                 SK_YU_WRITE_2(sc_if, YUKON_SAL2 + i * 4, reg);
2490         }
2491
2492         /* Set promiscuous mode */
2493         sk_setpromisc(sc_if);
2494
2495         /* Set multicast filter */
2496         sk_setmulti(sc_if);
2497
2498         /* enable interrupt mask for counter overflows */
2499         SK_YU_WRITE_2(sc_if, YUKON_TIMR, 0);
2500         SK_YU_WRITE_2(sc_if, YUKON_RIMR, 0);
2501         SK_YU_WRITE_2(sc_if, YUKON_TRIMR, 0);
2502
2503         /* Configure RX MAC FIFO */
2504         SK_IF_WRITE_1(sc_if, 0, SK_RXMF1_CTRL_TEST, SK_RFCTL_RESET_CLEAR);
2505         SK_IF_WRITE_4(sc_if, 0, SK_RXMF1_CTRL_TEST, SK_RFCTL_OPERATION_ON);
2506
2507         /* Configure TX MAC FIFO */
2508         SK_IF_WRITE_1(sc_if, 0, SK_TXMF1_CTRL_TEST, SK_TFCTL_RESET_CLEAR);
2509         SK_IF_WRITE_4(sc_if, 0, SK_TXMF1_CTRL_TEST, SK_TFCTL_OPERATION_ON);
2510 }
2511
2512 /*
2513  * Note that to properly initialize any part of the GEnesis chip,
2514  * you first have to take it out of reset mode.
2515  */
2516 static void sk_init(xsc)
2517         void                    *xsc;
2518 {
2519         struct sk_if_softc      *sc_if = xsc;
2520         struct sk_softc         *sc;
2521         struct ifnet            *ifp;
2522         struct mii_data         *mii;
2523         int                     s;
2524         u_int16_t               reg;
2525
2526         s = splimp();
2527
2528         ifp = &sc_if->arpcom.ac_if;
2529         sc = sc_if->sk_softc;
2530         mii = device_get_softc(sc_if->sk_miibus);
2531
2532         /* Cancel pending I/O and free all RX/TX buffers. */
2533         sk_stop(sc_if);
2534
2535         if (sc->sk_type == SK_GENESIS) {
2536                 /* Configure LINK_SYNC LED */
2537                 SK_IF_WRITE_1(sc_if, 0, SK_LINKLED1_CTL, SK_LINKLED_ON);
2538                 SK_IF_WRITE_1(sc_if, 0, SK_LINKLED1_CTL,
2539                         SK_LINKLED_LINKSYNC_ON);
2540
2541                 /* Configure RX LED */
2542                 SK_IF_WRITE_1(sc_if, 0, SK_RXLED1_CTL,
2543                         SK_RXLEDCTL_COUNTER_START);
2544
2545                 /* Configure TX LED */
2546                 SK_IF_WRITE_1(sc_if, 0, SK_TXLED1_CTL,
2547                         SK_TXLEDCTL_COUNTER_START);
2548         }
2549
2550         /* Configure I2C registers */
2551
2552         /* Configure XMAC(s) */
2553         switch (sc->sk_type) {
2554         case SK_GENESIS:
2555                 sk_init_xmac(sc_if);
2556                 break;
2557         case SK_YUKON:
2558                 sk_init_yukon(sc_if);
2559                 break;
2560         }
2561         mii_mediachg(mii);
2562
2563         if (sc->sk_type == SK_GENESIS) {
2564                 /* Configure MAC FIFOs */
2565                 SK_IF_WRITE_4(sc_if, 0, SK_RXF1_CTL, SK_FIFO_UNRESET);
2566                 SK_IF_WRITE_4(sc_if, 0, SK_RXF1_END, SK_FIFO_END);
2567                 SK_IF_WRITE_4(sc_if, 0, SK_RXF1_CTL, SK_FIFO_ON);
2568
2569                 SK_IF_WRITE_4(sc_if, 0, SK_TXF1_CTL, SK_FIFO_UNRESET);
2570                 SK_IF_WRITE_4(sc_if, 0, SK_TXF1_END, SK_FIFO_END);
2571                 SK_IF_WRITE_4(sc_if, 0, SK_TXF1_CTL, SK_FIFO_ON);
2572         }
2573
2574         /* Configure transmit arbiter(s) */
2575         SK_IF_WRITE_1(sc_if, 0, SK_TXAR1_COUNTERCTL,
2576             SK_TXARCTL_ON|SK_TXARCTL_FSYNC_ON);
2577
2578         /* Configure RAMbuffers */
2579         SK_IF_WRITE_4(sc_if, 0, SK_RXRB1_CTLTST, SK_RBCTL_UNRESET);
2580         SK_IF_WRITE_4(sc_if, 0, SK_RXRB1_START, sc_if->sk_rx_ramstart);
2581         SK_IF_WRITE_4(sc_if, 0, SK_RXRB1_WR_PTR, sc_if->sk_rx_ramstart);
2582         SK_IF_WRITE_4(sc_if, 0, SK_RXRB1_RD_PTR, sc_if->sk_rx_ramstart);
2583         SK_IF_WRITE_4(sc_if, 0, SK_RXRB1_END, sc_if->sk_rx_ramend);
2584         SK_IF_WRITE_4(sc_if, 0, SK_RXRB1_CTLTST, SK_RBCTL_ON);
2585
2586         SK_IF_WRITE_4(sc_if, 1, SK_TXRBS1_CTLTST, SK_RBCTL_UNRESET);
2587         SK_IF_WRITE_4(sc_if, 1, SK_TXRBS1_CTLTST, SK_RBCTL_STORENFWD_ON);
2588         SK_IF_WRITE_4(sc_if, 1, SK_TXRBS1_START, sc_if->sk_tx_ramstart);
2589         SK_IF_WRITE_4(sc_if, 1, SK_TXRBS1_WR_PTR, sc_if->sk_tx_ramstart);
2590         SK_IF_WRITE_4(sc_if, 1, SK_TXRBS1_RD_PTR, sc_if->sk_tx_ramstart);
2591         SK_IF_WRITE_4(sc_if, 1, SK_TXRBS1_END, sc_if->sk_tx_ramend);
2592         SK_IF_WRITE_4(sc_if, 1, SK_TXRBS1_CTLTST, SK_RBCTL_ON);
2593
2594         /* Configure BMUs */
2595         SK_IF_WRITE_4(sc_if, 0, SK_RXQ1_BMU_CSR, SK_RXBMU_ONLINE);
2596         SK_IF_WRITE_4(sc_if, 0, SK_RXQ1_CURADDR_LO,
2597             vtophys(&sc_if->sk_rdata->sk_rx_ring[0]));
2598         SK_IF_WRITE_4(sc_if, 0, SK_RXQ1_CURADDR_HI, 0);
2599
2600         SK_IF_WRITE_4(sc_if, 1, SK_TXQS1_BMU_CSR, SK_TXBMU_ONLINE);
2601         SK_IF_WRITE_4(sc_if, 1, SK_TXQS1_CURADDR_LO,
2602             vtophys(&sc_if->sk_rdata->sk_tx_ring[0]));
2603         SK_IF_WRITE_4(sc_if, 1, SK_TXQS1_CURADDR_HI, 0);
2604
2605         /* Init descriptors */
2606         if (sk_init_rx_ring(sc_if) == ENOBUFS) {
2607                 printf("sk%d: initialization failed: no "
2608                     "memory for rx buffers\n", sc_if->sk_unit);
2609                 sk_stop(sc_if);
2610                 (void)splx(s);
2611                 return;
2612         }
2613         sk_init_tx_ring(sc_if);
2614
2615         /* Configure interrupt handling */
2616         CSR_READ_4(sc, SK_ISSR);
2617         if (sc_if->sk_port == SK_PORT_A)
2618                 sc->sk_intrmask |= SK_INTRS1;
2619         else
2620                 sc->sk_intrmask |= SK_INTRS2;
2621
2622         sc->sk_intrmask |= SK_ISR_EXTERNAL_REG;
2623
2624         CSR_WRITE_4(sc, SK_IMR, sc->sk_intrmask);
2625
2626         /* Start BMUs. */
2627         SK_IF_WRITE_4(sc_if, 0, SK_RXQ1_BMU_CSR, SK_RXBMU_RX_START);
2628
2629         switch(sc->sk_type) {
2630         case SK_GENESIS:
2631                 /* Enable XMACs TX and RX state machines */
2632                 SK_XM_CLRBIT_2(sc_if, XM_MMUCMD, XM_MMUCMD_IGNPAUSE);
2633                 SK_XM_SETBIT_2(sc_if, XM_MMUCMD, XM_MMUCMD_TX_ENB|XM_MMUCMD_RX_ENB);
2634                 break;
2635         case SK_YUKON:
2636                 reg = SK_YU_READ_2(sc_if, YUKON_GPCR);
2637                 reg |= YU_GPCR_TXEN | YU_GPCR_RXEN;
2638                 reg &= ~(YU_GPCR_SPEED_EN | YU_GPCR_DPLX_EN);
2639                 SK_YU_WRITE_2(sc_if, YUKON_GPCR, reg);
2640         }
2641
2642         ifp->if_flags |= IFF_RUNNING;
2643         ifp->if_flags &= ~IFF_OACTIVE;
2644
2645         splx(s);
2646
2647         return;
2648 }
2649
2650 static void sk_stop(sc_if)
2651         struct sk_if_softc      *sc_if;
2652 {
2653         int                     i;
2654         struct sk_softc         *sc;
2655         struct ifnet            *ifp;
2656
2657         sc = sc_if->sk_softc;
2658         ifp = &sc_if->arpcom.ac_if;
2659
2660         callout_stop(&sc_if->sk_tick_timer);
2661
2662         if (sc_if->sk_phytype == SK_PHYTYPE_BCOM) {
2663                 u_int32_t               val;
2664
2665                 /* Put PHY back into reset. */
2666                 val = sk_win_read_4(sc, SK_GPIO);
2667                 if (sc_if->sk_port == SK_PORT_A) {
2668                         val |= SK_GPIO_DIR0;
2669                         val &= ~SK_GPIO_DAT0;
2670                 } else {
2671                         val |= SK_GPIO_DIR2;
2672                         val &= ~SK_GPIO_DAT2;
2673                 }
2674                 sk_win_write_4(sc, SK_GPIO, val);
2675         }
2676
2677         /* Turn off various components of this interface. */
2678         SK_XM_SETBIT_2(sc_if, XM_GPIO, XM_GPIO_RESETMAC);
2679         switch (sc->sk_type) {
2680         case SK_GENESIS:
2681                 SK_IF_WRITE_2(sc_if, 0, SK_TXF1_MACCTL, SK_TXMACCTL_XMAC_RESET);
2682                 SK_IF_WRITE_4(sc_if, 0, SK_RXF1_CTL, SK_FIFO_RESET);
2683                 break;
2684         case SK_YUKON:
2685                 SK_IF_WRITE_1(sc_if,0, SK_RXMF1_CTRL_TEST, SK_RFCTL_RESET_SET);
2686                 SK_IF_WRITE_1(sc_if,0, SK_TXMF1_CTRL_TEST, SK_TFCTL_RESET_SET);
2687                 break;
2688         }
2689         SK_IF_WRITE_4(sc_if, 0, SK_RXQ1_BMU_CSR, SK_RXBMU_OFFLINE);
2690         SK_IF_WRITE_4(sc_if, 0, SK_RXRB1_CTLTST, SK_RBCTL_RESET|SK_RBCTL_OFF);
2691         SK_IF_WRITE_4(sc_if, 1, SK_TXQS1_BMU_CSR, SK_TXBMU_OFFLINE);
2692         SK_IF_WRITE_4(sc_if, 1, SK_TXRBS1_CTLTST, SK_RBCTL_RESET|SK_RBCTL_OFF);
2693         SK_IF_WRITE_1(sc_if, 0, SK_TXAR1_COUNTERCTL, SK_TXARCTL_OFF);
2694         SK_IF_WRITE_1(sc_if, 0, SK_RXLED1_CTL, SK_RXLEDCTL_COUNTER_STOP);
2695         SK_IF_WRITE_1(sc_if, 0, SK_TXLED1_CTL, SK_RXLEDCTL_COUNTER_STOP);
2696         SK_IF_WRITE_1(sc_if, 0, SK_LINKLED1_CTL, SK_LINKLED_OFF);
2697         SK_IF_WRITE_1(sc_if, 0, SK_LINKLED1_CTL, SK_LINKLED_LINKSYNC_OFF);
2698
2699         /* Disable interrupts */
2700         if (sc_if->sk_port == SK_PORT_A)
2701                 sc->sk_intrmask &= ~SK_INTRS1;
2702         else
2703                 sc->sk_intrmask &= ~SK_INTRS2;
2704         CSR_WRITE_4(sc, SK_IMR, sc->sk_intrmask);
2705
2706         SK_XM_READ_2(sc_if, XM_ISR);
2707         SK_XM_WRITE_2(sc_if, XM_IMR, 0xFFFF);
2708
2709         /* Free RX and TX mbufs still in the queues. */
2710         for (i = 0; i < SK_RX_RING_CNT; i++) {
2711                 if (sc_if->sk_cdata.sk_rx_chain[i].sk_mbuf != NULL) {
2712                         m_freem(sc_if->sk_cdata.sk_rx_chain[i].sk_mbuf);
2713                         sc_if->sk_cdata.sk_rx_chain[i].sk_mbuf = NULL;
2714                 }
2715         }
2716
2717         for (i = 0; i < SK_TX_RING_CNT; i++) {
2718                 if (sc_if->sk_cdata.sk_tx_chain[i].sk_mbuf != NULL) {
2719                         m_freem(sc_if->sk_cdata.sk_tx_chain[i].sk_mbuf);
2720                         sc_if->sk_cdata.sk_tx_chain[i].sk_mbuf = NULL;
2721                 }
2722         }
2723
2724         ifp->if_flags &= ~(IFF_RUNNING|IFF_OACTIVE);
2725
2726         return;
2727 }