sys/dev/usbmisc/umass/umass.c

   1 /*-
   2  * Copyright (c) 1999 MAEKAWA Masahide <bishop@rr.iij4u.or.jp>,
   3  *                    Nick Hibma <n_hibma@freebsd.org>
   4  * All rights reserved.
   5  *
   6  * Redistribution and use in source and binary forms, with or without
   7  * modification, are permitted provided that the following conditions
   8  * are met:
   9  * 1. Redistributions of source code must retain the above copyright
  10  *    notice, this list of conditions and the following disclaimer.
  11  * 2. Redistributions in binary form must reproduce the above copyright
  12  *    notice, this list of conditions and the following disclaimer in the
  13  *    documentation and/or other materials provided with the distribution.
  14  *
  15  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
  16  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
  17  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
  18  * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
  19  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  20  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
  21  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
  22  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
  23  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
  24  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
  25  * SUCH DAMAGE.
  26  *
  27  * $NetBSD: umass.c,v 1.28 2000/04/02 23:46:53 augustss Exp $
  28  * $FreeBSD: src/sys/dev/usb/umass.c,v 1.96 2003/12/19 12:19:11 sanpei Exp $
  29  * $DragonFly: src/sys/dev/usbmisc/umass/umass.c,v 1.9 2004/03/15 01:10:45 dillon Exp $
  30  */
  31
  32 /*
  33  * Universal Serial Bus Mass Storage Class specs:
  34  * http://www.usb.org/developers/data/devclass/usbmassover_11.pdf
  35  * http://www.usb.org/developers/data/devclass/usbmassbulk_10.pdf
  36  * http://www.usb.org/developers/data/devclass/usbmass-cbi10.pdf
  37  * http://www.usb.org/developers/data/devclass/usbmass-ufi10.pdf
  38  */
  39
  40 /*
  41  * Ported to NetBSD by Lennart Augustsson <augustss@netbsd.org>.
  42  * Parts of the code written my Jason R. Thorpe <thorpej@shagadelic.org>.
  43  */
  44
  45 /*
  46  * The driver handles 3 Wire Protocols
  47  * - Command/Bulk/Interrupt (CBI)
  48  * - Command/Bulk/Interrupt with Command Completion Interrupt (CBI with CCI)
  49  * - Mass Storage Bulk-Only (BBB)
  50  *   (BBB refers Bulk/Bulk/Bulk for Command/Data/Status phases)
  51  *
  52  * Over these wire protocols it handles the following command protocols
  53  * - SCSI
  54  * - UFI (floppy command set)
  55  * - 8070i (ATAPI)
  56  *
  57  * UFI and 8070i (ATAPI) are transformed versions of the SCSI command set. The
  58  * sc->transform method is used to convert the commands into the appropriate
  59  * format (if at all necessary). For example, UFI requires all commands to be
  60  * 12 bytes in length amongst other things.
  61  *
  62  * The source code below is marked and can be split into a number of pieces
  63  * (in this order):
  64  *
  65  * - probe/attach/detach
  66  * - generic transfer routines
  67  * - BBB
  68  * - CBI
  69  * - CBI_I (in addition to functions from CBI)
  70  * - CAM (Common Access Method)
  71  * - SCSI
  72  * - UFI
  73  * - 8070i (ATAPI)
  74  *
  75  * The protocols are implemented using a state machine, for the transfers as
  76  * well as for the resets. The state machine is contained in umass_*_state.
  77  * The state machine is started through either umass_*_transfer or
  78  * umass_*_reset.
  79  *
  80  * The reason for doing this is a) CAM performs a lot better this way and b) it
  81  * avoids using tsleep from interrupt context (for example after a failed
  82  * transfer).
  83  */
  84
  85 /*
  86  * The SCSI related part of this driver has been derived from the
  87  * dev/ppbus/vpo.c driver, by Nicolas Souchu (nsouch@freebsd.org).
  88  *
  89  * The CAM layer uses so called actions which are messages sent to the host
  90  * adapter for completion. The actions come in through umass_cam_action. The
  91  * appropriate block of routines is called depending on the transport protocol
  92  * in use. When the transfer has finished, these routines call
  93  * umass_cam_cb again to complete the CAM command.
  94  */
  95
  96 /*
  97  * XXX Currently CBI with CCI is not supported because it bombs the system
  98  *     when the device is detached (low frequency interrupts are detached
  99  *     too late.
 100  */
 101 #undef CBI_I
 102
 103 #include <sys/param.h>
 104 #include <sys/systm.h>
 105 #include <sys/kernel.h>
 106 #include <sys/module.h>
 107 #include <sys/bus.h>
 108 #include <sys/sysctl.h>
 109
 110 #include <bus/usb/usb.h>
 111 #include <bus/usb/usbdi.h>
 112 #include <bus/usb/usbdi_util.h>
 113 #include <bus/usb/usbdevs.h>
 114
 115 #include <bus/cam/cam.h>
 116 #include <bus/cam/cam_ccb.h>
 117 #include <bus/cam/cam_sim.h>
 118 #include <bus/cam/cam_xpt_sim.h>
 119 #include <bus/cam/scsi/scsi_all.h>
 120 #include <bus/cam/scsi/scsi_da.h>
 121
 122 #include <bus/cam/cam_periph.h>
 123
 124 #ifdef USB_DEBUG
 125 #define DIF(m, x)       if (umassdebug & (m)) do { x ; } while (0)
 126 #define DPRINTF(m, x)   if (umassdebug & (m)) logprintf x
 127 #define UDMASS_GEN      0x00010000      /* general */
 128 #define UDMASS_SCSI     0x00020000      /* scsi */
 129 #define UDMASS_UFI      0x00040000      /* ufi command set */
 130 #define UDMASS_ATAPI    0x00080000      /* 8070i command set */
 131 #define UDMASS_CMD      (UDMASS_SCSI|UDMASS_UFI|UDMASS_ATAPI)
 132 #define UDMASS_USB      0x00100000      /* USB general */
 133 #define UDMASS_BBB      0x00200000      /* Bulk-Only transfers */
 134 #define UDMASS_CBI      0x00400000      /* CBI transfers */
 135 #define UDMASS_WIRE     (UDMASS_BBB|UDMASS_CBI)
 136 #define UDMASS_ALL      0xffff0000      /* all of the above */
 137 int umassdebug = 0;
 138 SYSCTL_NODE(_hw_usb, OID_AUTO, umass, CTLFLAG_RW, 0, "USB umass");
 139 SYSCTL_INT(_hw_usb_umass, OID_AUTO, debug, CTLFLAG_RW,
 140            &umassdebug, 0, "umass debug level");
 141 #else
 142 #define DIF(m, x)       /* nop */
 143 #define DPRINTF(m, x)   /* nop */
 144 #endif
 145
 146
 147 /* Generic definitions */
 148
 149 /* Direction for umass_*_transfer */
 150 #define DIR_NONE        0
 151 #define DIR_IN          1
 152 #define DIR_OUT         2
 153
 154 /* device name */
 155 #define DEVNAME         "umass"
 156 #define DEVNAME_SIM     "umass-sim"
 157
 158 #define UMASS_MAX_TRANSFER_SIZE         65536
 159 #define UMASS_DEFAULT_TRANSFER_SPEED    1000
 160 #define UMASS_FLOPPY_TRANSFER_SPEED     20
 161
 162 #define UMASS_TIMEOUT                   5000 /* msecs */
 163
 164 /* CAM specific definitions */
 165
 166 #define UMASS_SCSIID_MAX        1       /* maximum number of drives expected */
 167 #define UMASS_SCSIID_HOST       UMASS_SCSIID_MAX
 168
 169 #define MS_TO_TICKS(ms) ((ms) * hz / 1000)
 170
 171
 172 /* Bulk-Only features */
 173
 174 #define UR_BBB_RESET            0xff            /* Bulk-Only reset */
 175 #define UR_BBB_GET_MAX_LUN      0xfe            /* Get maximum lun */
 176
 177 /* Command Block Wrapper */
 178 typedef struct {
 179         uDWord          dCBWSignature;
 180 #       define CBWSIGNATURE     0x43425355
 181         uDWord          dCBWTag;
 182         uDWord          dCBWDataTransferLength;
 183         uByte           bCBWFlags;
 184 #       define CBWFLAGS_OUT     0x00
 185 #       define CBWFLAGS_IN      0x80
 186         uByte           bCBWLUN;
 187         uByte           bCDBLength;
 188 #       define CBWCDBLENGTH     16
 189         uByte           CBWCDB[CBWCDBLENGTH];
 190 } umass_bbb_cbw_t;
 191 #define UMASS_BBB_CBW_SIZE      31
 192
 193 /* Command Status Wrapper */
 194 typedef struct {
 195         uDWord          dCSWSignature;
 196 #       define CSWSIGNATURE     0x53425355
 197 #       define CSWSIGNATURE_OLYMPUS_C1  0x55425355
 198         uDWord          dCSWTag;
 199         uDWord          dCSWDataResidue;
 200         uByte           bCSWStatus;
 201 #       define CSWSTATUS_GOOD   0x0
 202 #       define CSWSTATUS_FAILED 0x1
 203 #       define CSWSTATUS_PHASE  0x2
 204 } umass_bbb_csw_t;
 205 #define UMASS_BBB_CSW_SIZE      13
 206
 207 /* CBI features */
 208
 209 #define UR_CBI_ADSC     0x00
 210
 211 typedef unsigned char umass_cbi_cbl_t[16];      /* Command block */
 212
 213 typedef union {
 214         struct {
 215                 unsigned char   type;
 216                 #define IDB_TYPE_CCI            0x00
 217                 unsigned char   value;
 218                 #define IDB_VALUE_PASS          0x00
 219                 #define IDB_VALUE_FAIL          0x01
 220                 #define IDB_VALUE_PHASE         0x02
 221                 #define IDB_VALUE_PERSISTENT    0x03
 222                 #define IDB_VALUE_STATUS_MASK   0x03
 223         } common;
 224
 225         struct {
 226                 unsigned char   asc;
 227                 unsigned char   ascq;
 228         } ufi;
 229 } umass_cbi_sbl_t;
 230
 231
 232
 233 struct umass_softc;             /* see below */
 234
 235 typedef void (*transfer_cb_f)   (struct umass_softc *sc, void *priv,
 236                                 int residue, int status);
 237 #define STATUS_CMD_OK           0       /* everything ok */
 238 #define STATUS_CMD_UNKNOWN      1       /* will have to fetch sense */
 239 #define STATUS_CMD_FAILED       2       /* transfer was ok, command failed */
 240 #define STATUS_WIRE_FAILED      3       /* couldn't even get command across */
 241
 242 typedef void (*wire_reset_f)    (struct umass_softc *sc, int status);
 243 typedef void (*wire_transfer_f) (struct umass_softc *sc, int lun,
 244                                 void *cmd, int cmdlen, void *data, int datalen,
 245                                 int dir, transfer_cb_f cb, void *priv);
 246 typedef void (*wire_state_f)    (usbd_xfer_handle xfer,
 247                                 usbd_private_handle priv, usbd_status err);
 248
 249 typedef int (*command_transform_f)      (struct umass_softc *sc,
 250                                 unsigned char *cmd, int cmdlen,
 251                                 unsigned char **rcmd, int *rcmdlen);
 252
 253
 254 struct umass_devdescr_t {
 255         u_int32_t       vid;
 256 #       define VID_WILDCARD     0xffffffff
 257 #       define VID_EOT          0xfffffffe
 258         u_int32_t       pid;
 259 #       define PID_WILDCARD     0xffffffff
 260 #       define PID_EOT          0xfffffffe
 261         u_int32_t       rid;
 262 #       define RID_WILDCARD     0xffffffff
 263 #       define RID_EOT          0xfffffffe
 264
 265         /* wire and command protocol */
 266         u_int16_t       proto;
 267 #       define UMASS_PROTO_BBB          0x0001  /* USB wire protocol */
 268 #       define UMASS_PROTO_CBI          0x0002
 269 #       define UMASS_PROTO_CBI_I        0x0004
 270 #       define UMASS_PROTO_WIRE         0x00ff  /* USB wire protocol mask */
 271 #       define UMASS_PROTO_SCSI         0x0100  /* command protocol */
 272 #       define UMASS_PROTO_ATAPI        0x0200
 273 #       define UMASS_PROTO_UFI          0x0400
 274 #       define UMASS_PROTO_RBC          0x0800
 275 #       define UMASS_PROTO_COMMAND      0xff00  /* command protocol mask */
 276
 277         /* Device specific quirks */
 278         u_int16_t       quirks;
 279 #       define NO_QUIRKS                0x0000
 280         /* The drive does not support Test Unit Ready. Convert to Start Unit
 281          */
 282 #       define NO_TEST_UNIT_READY       0x0001
 283         /* The drive does not reset the Unit Attention state after REQUEST
 284          * SENSE has been sent. The INQUIRY command does not reset the UA
 285          * either, and so CAM runs in circles trying to retrieve the initial
 286          * INQUIRY data.
 287          */
 288 #       define RS_NO_CLEAR_UA           0x0002
 289         /* The drive does not support START STOP.  */
 290 #       define NO_START_STOP            0x0004
 291         /* Don't ask for full inquiry data (255b).  */
 292 #       define FORCE_SHORT_INQUIRY      0x0008
 293         /* Needs to be initialised the Shuttle way */
 294 #       define SHUTTLE_INIT             0x0010
 295         /* Drive needs to be switched to alternate iface 1 */
 296 #       define ALT_IFACE_1              0x0020
 297         /* Drive does not do 1Mb/s, but just floppy speeds (20kb/s) */
 298 #       define FLOPPY_SPEED             0x0040
 299         /* The device can't count and gets the residue of transfers wrong */
 300 #       define IGNORE_RESIDUE           0x0080
 301         /* No GetMaxLun call */
 302 #       define NO_GETMAXLUN             0x0100
 303         /* The device uses a weird CSWSIGNATURE. */
 304 #       define WRONG_CSWSIG             0x0200
 305         /* Device cannot handle INQUIRY so fake a generic response */
 306 #       define NO_INQUIRY               0x0400
 307         /* Device cannot handle INQUIRY EVPD, return CHECK CONDITION */
 308 #       define NO_INQUIRY_EVPD          0x0800
 309 };
 310
 311 Static struct umass_devdescr_t umass_devdescrs[] = {
 312         { USB_VENDOR_ASAHIOPTICAL, PID_WILDCARD, RID_WILDCARD,
 313           UMASS_PROTO_ATAPI | UMASS_PROTO_CBI_I,
 314           RS_NO_CLEAR_UA
 315         },
 316         { USB_VENDOR_FUJIPHOTO, USB_PRODUCT_FUJIPHOTO_MASS0100, RID_WILDCARD,
 317           UMASS_PROTO_ATAPI | UMASS_PROTO_CBI_I,
 318           RS_NO_CLEAR_UA
 319         },
 320         { USB_VENDOR_GENESYS,  USB_PRODUCT_GENESYS_GL641USB2IDE, RID_WILDCARD,
 321           UMASS_PROTO_SCSI | UMASS_PROTO_BBB,
 322           FORCE_SHORT_INQUIRY | NO_START_STOP | IGNORE_RESIDUE
 323         },
 324         { USB_VENDOR_GENESYS,  USB_PRODUCT_GENESYS_GL641USB, RID_WILDCARD,
 325           UMASS_PROTO_SCSI | UMASS_PROTO_BBB,
 326           FORCE_SHORT_INQUIRY | NO_START_STOP | IGNORE_RESIDUE
 327         },
 328         { USB_VENDOR_HITACHI, USB_PRODUCT_HITACHI_DVDCAM_USB, RID_WILDCARD,
 329           UMASS_PROTO_ATAPI | UMASS_PROTO_CBI_I,
 330           NO_INQUIRY
 331         },
 332         { USB_VENDOR_HP, USB_PRODUCT_HP_CDW8200, RID_WILDCARD,
 333           UMASS_PROTO_ATAPI | UMASS_PROTO_CBI_I,
 334           NO_TEST_UNIT_READY | NO_START_STOP
 335         },
 336         { USB_VENDOR_INSYSTEM, USB_PRODUCT_INSYSTEM_USBCABLE, RID_WILDCARD,
 337           UMASS_PROTO_ATAPI | UMASS_PROTO_CBI,
 338           NO_TEST_UNIT_READY | NO_START_STOP | ALT_IFACE_1
 339         },
 340         { USB_VENDOR_IOMEGA, USB_PRODUCT_IOMEGA_ZIP100, RID_WILDCARD,
 341           /* XXX This is not correct as there are Zip drives that use ATAPI.
 342            */
 343           UMASS_PROTO_SCSI | UMASS_PROTO_BBB,
 344           NO_TEST_UNIT_READY
 345         },
 346         { USB_VENDOR_LOGITEC, USB_PRODUCT_LOGITEC_LDR_H443U2, RID_WILDCARD,
 347           UMASS_PROTO_SCSI | UMASS_PROTO_BBB,
 348           NO_QUIRKS
 349         },
 350         { USB_VENDOR_MELCO,  USB_PRODUCT_MELCO_DUBPXXG, RID_WILDCARD,
 351           UMASS_PROTO_SCSI | UMASS_PROTO_BBB,
 352           FORCE_SHORT_INQUIRY | NO_START_STOP | IGNORE_RESIDUE
 353         },
 354         { USB_VENDOR_MICROTECH, USB_PRODUCT_MICROTECH_DPCM, RID_WILDCARD,
 355           UMASS_PROTO_SCSI | UMASS_PROTO_CBI,
 356           NO_TEST_UNIT_READY | NO_START_STOP
 357         },
 358         { USB_VENDOR_MSYSTEMS, USB_PRODUCT_MSYSTEMS_DISKONKEY, RID_WILDCARD,
 359           UMASS_PROTO_SCSI | UMASS_PROTO_BBB,
 360           IGNORE_RESIDUE | NO_GETMAXLUN | RS_NO_CLEAR_UA
 361         },
 362         { USB_VENDOR_MSYSTEMS, USB_PRODUCT_MSYSTEMS_DISKONKEY2, RID_WILDCARD,
 363           UMASS_PROTO_ATAPI | UMASS_PROTO_BBB,
 364           NO_QUIRKS
 365         },
 366         { USB_VENDOR_OLYMPUS, USB_PRODUCT_OLYMPUS_C1, RID_WILDCARD,
 367           UMASS_PROTO_SCSI | UMASS_PROTO_BBB,
 368           WRONG_CSWSIG
 369         },
 370         { USB_VENDOR_PANASONIC, USB_PRODUCT_PANASONIC_KXLCB20AN, RID_WILDCARD,
 371           UMASS_PROTO_SCSI | UMASS_PROTO_BBB,
 372           NO_QUIRKS
 373         },
 374         { USB_VENDOR_PANASONIC, USB_PRODUCT_PANASONIC_KXLCB35AN, RID_WILDCARD,
 375           UMASS_PROTO_SCSI | UMASS_PROTO_BBB,
 376           NO_QUIRKS
 377         },
 378         { USB_VENDOR_PNY, USB_PRODUCT_PNY_ATTACHE, RID_WILDCARD,
 379           UMASS_PROTO_SCSI | UMASS_PROTO_BBB,
 380           IGNORE_RESIDUE
 381         },
 382         { USB_VENDOR_SCANLOGIC, USB_PRODUCT_SCANLOGIC_SL11R, RID_WILDCARD,
 383           UMASS_PROTO_ATAPI | UMASS_PROTO_CBI_I,
 384           NO_QUIRKS
 385         },
 386         { USB_VENDOR_SHUTTLE, USB_PRODUCT_SHUTTLE_EUSB, RID_WILDCARD,
 387           UMASS_PROTO_ATAPI | UMASS_PROTO_CBI_I,
 388           NO_TEST_UNIT_READY | NO_START_STOP | SHUTTLE_INIT
 389         },
 390         { USB_VENDOR_SIGMATEL, USB_PRODUCT_SIGMATEL_I_BEAD100, RID_WILDCARD,
 391           UMASS_PROTO_SCSI | UMASS_PROTO_BBB,
 392           SHUTTLE_INIT
 393         },
 394         { USB_VENDOR_SONY, USB_PRODUCT_SONY_DSC, RID_WILDCARD,
 395           UMASS_PROTO_RBC | UMASS_PROTO_CBI,
 396           NO_QUIRKS
 397         },
 398         { USB_VENDOR_SONY, USB_PRODUCT_SONY_MSC, RID_WILDCARD,
 399           UMASS_PROTO_RBC | UMASS_PROTO_CBI,
 400           NO_QUIRKS
 401         },
 402         { USB_VENDOR_TREK, USB_PRODUCT_TREK_THUMBDRIVE_8MB, RID_WILDCARD,
 403           UMASS_PROTO_ATAPI | UMASS_PROTO_BBB,
 404           IGNORE_RESIDUE
 405         },
 406         { USB_VENDOR_YANO,  USB_PRODUCT_YANO_U640MO, RID_WILDCARD,
 407           UMASS_PROTO_ATAPI | UMASS_PROTO_CBI_I,
 408           FORCE_SHORT_INQUIRY
 409         },
 410         { VID_EOT, PID_EOT, RID_EOT, 0, 0 }
 411 };
 412
 413
 414 /* the per device structure */
 415 struct umass_softc {
 416         USBBASEDEVICE           sc_dev;         /* base device */
 417         usbd_device_handle      sc_udev;        /* USB device */
 418
 419         struct cam_sim          *umass_sim;     /* SCSI Interface Module */
 420
 421         unsigned char           flags;          /* various device flags */
 422 #       define UMASS_FLAGS_GONE         0x01    /* devices is no more */
 423
 424         u_int16_t               proto;          /* wire and cmd protocol */
 425         u_int16_t               quirks;         /* they got it almost right */
 426
 427         usbd_interface_handle   iface;          /* Mass Storage interface */
 428         int                     ifaceno;        /* MS iface number */
 429
 430         u_int8_t                bulkin;         /* bulk-in Endpoint Address */
 431         u_int8_t                bulkout;        /* bulk-out Endpoint Address */
 432         u_int8_t                intrin;         /* intr-in Endp. (CBI) */
 433         usbd_pipe_handle        bulkin_pipe;
 434         usbd_pipe_handle        bulkout_pipe;
 435         usbd_pipe_handle        intrin_pipe;
 436
 437         /* Reset the device in a wire protocol specific way */
 438         wire_reset_f            reset;
 439
 440         /* The start of a wire transfer. It prepares the whole transfer (cmd,
 441          * data, and status stage) and initiates it. It is up to the state
 442          * machine (below) to handle the various stages and errors in these
 443          */
 444         wire_transfer_f         transfer;
 445
 446         /* The state machine, handling the various states during a transfer */
 447         wire_state_f            state;
 448
 449         /* The command transform function is used to conver the SCSI commands
 450          * into their derivatives, like UFI, ATAPI, and friends.
 451          */
 452         command_transform_f     transform;      /* command transform */
 453
 454         /* Bulk specific variables for transfers in progress */
 455         umass_bbb_cbw_t         cbw;    /* command block wrapper */
 456         umass_bbb_csw_t         csw;    /* command status wrapper*/
 457         /* CBI specific variables for transfers in progress */
 458         umass_cbi_cbl_t         cbl;    /* command block */
 459         umass_cbi_sbl_t         sbl;    /* status block */
 460
 461         /* generic variables for transfers in progress */
 462         /* ctrl transfer requests */
 463         usb_device_request_t    request;
 464
 465         /* xfer handles
 466          * Most of our operations are initiated from interrupt context, so
 467          * we need to avoid using the one that is in use. We want to avoid
 468          * allocating them in the interrupt context as well.
 469          */
 470         /* indices into array below */
 471 #       define XFER_BBB_CBW             0       /* Bulk-Only */
 472 #       define XFER_BBB_DATA            1
 473 #       define XFER_BBB_DCLEAR          2
 474 #       define XFER_BBB_CSW1            3
 475 #       define XFER_BBB_CSW2            4
 476 #       define XFER_BBB_SCLEAR          5
 477 #       define XFER_BBB_RESET1          6
 478 #       define XFER_BBB_RESET2          7
 479 #       define XFER_BBB_RESET3          8
 480
 481 #       define XFER_CBI_CB              0       /* CBI */
 482 #       define XFER_CBI_DATA            1
 483 #       define XFER_CBI_STATUS          2
 484 #       define XFER_CBI_DCLEAR          3
 485 #       define XFER_CBI_SCLEAR          4
 486 #       define XFER_CBI_RESET1          5
 487 #       define XFER_CBI_RESET2          6
 488 #       define XFER_CBI_RESET3          7
 489
 490 #       define XFER_NR                  9       /* maximum number */
 491
 492         usbd_xfer_handle        transfer_xfer[XFER_NR]; /* for ctrl xfers */
 493
 494         int                     transfer_dir;           /* data direction */
 495         void                    *transfer_data;         /* data buffer */
 496         int                     transfer_datalen;       /* (maximum) length */
 497         int                     transfer_actlen;        /* actual length */
 498         transfer_cb_f           transfer_cb;            /* callback */
 499         void                    *transfer_priv;         /* for callback */
 500         int                     transfer_status;
 501
 502         int                     transfer_state;
 503 #       define TSTATE_ATTACH                    0       /* in attach */
 504 #       define TSTATE_IDLE                      1
 505 #       define TSTATE_BBB_COMMAND               2       /* CBW transfer */
 506 #       define TSTATE_BBB_DATA                  3       /* Data transfer */
 507 #       define TSTATE_BBB_DCLEAR                4       /* clear endpt stall */
 508 #       define TSTATE_BBB_STATUS1               5       /* clear endpt stall */
 509 #       define TSTATE_BBB_SCLEAR                6       /* clear endpt stall */
 510 #       define TSTATE_BBB_STATUS2               7       /* CSW transfer */
 511 #       define TSTATE_BBB_RESET1                8       /* reset command */
 512 #       define TSTATE_BBB_RESET2                9       /* in clear stall */
 513 #       define TSTATE_BBB_RESET3                10      /* out clear stall */
 514 #       define TSTATE_CBI_COMMAND               11      /* command transfer */
 515 #       define TSTATE_CBI_DATA                  12      /* data transfer */
 516 #       define TSTATE_CBI_STATUS                13      /* status transfer */
 517 #       define TSTATE_CBI_DCLEAR                14      /* clear ep stall */
 518 #       define TSTATE_CBI_SCLEAR                15      /* clear ep stall */
 519 #       define TSTATE_CBI_RESET1                16      /* reset command */
 520 #       define TSTATE_CBI_RESET2                17      /* in clear stall */
 521 #       define TSTATE_CBI_RESET3                18      /* out clear stall */
 522 #       define TSTATE_STATES                    19      /* # of states above */
 523
 524
 525         /* SCSI/CAM specific variables */
 526         unsigned char           cam_scsi_command[CAM_MAX_CDBLEN];
 527         unsigned char           cam_scsi_command2[CAM_MAX_CDBLEN];
 528         struct scsi_sense       cam_scsi_sense;
 529         struct scsi_sense       cam_scsi_test_unit_ready;
 530
 531         int                     maxlun;                 /* maximum LUN number */
 532         struct callout_handle   rescan_timeout;
 533 };
 534
 535 #ifdef USB_DEBUG
 536 char *states[TSTATE_STATES+1] = {
 537         /* should be kept in sync with the list at transfer_state */
 538         "Attach",
 539         "Idle",
 540         "BBB CBW",
 541         "BBB Data",
 542         "BBB Data bulk-in/-out clear stall",
 543         "BBB CSW, 1st attempt",
 544         "BBB CSW bulk-in clear stall",
 545         "BBB CSW, 2nd attempt",
 546         "BBB Reset",
 547         "BBB bulk-in clear stall",
 548         "BBB bulk-out clear stall",
 549         "CBI Command",
 550         "CBI Data",
 551         "CBI Status",
 552         "CBI Data bulk-in/-out clear stall",
 553         "CBI Status intr-in clear stall",
 554         "CBI Reset",
 555         "CBI bulk-in clear stall",
 556         "CBI bulk-out clear stall",
 557         NULL
 558 };
 559 #endif
 560
 561 /* If device cannot return valid inquiry data, fake it */
 562 Static uint8_t fake_inq_data[SHORT_INQUIRY_LENGTH] = {
 563         0, /*removable*/ 0x80, SCSI_REV_2, SCSI_REV_2,
 564         /*additional_length*/ 31, 0, 0, 0
 565 };
 566
 567 /* USB device probe/attach/detach functions */
 568 USB_DECLARE_DRIVER(umass);
 569 Static int umass_match_proto    (struct umass_softc *sc,
 570                                 usbd_interface_handle iface,
 571                                 usbd_device_handle udev);
 572
 573 /* quirk functions */
 574 Static void umass_init_shuttle  (struct umass_softc *sc);
 575
 576 /* generic transfer functions */
 577 Static usbd_status umass_setup_transfer (struct umass_softc *sc,
 578                                 usbd_pipe_handle pipe,
 579                                 void *buffer, int buflen, int flags,
 580                                 usbd_xfer_handle xfer);
 581 Static usbd_status umass_setup_ctrl_transfer    (struct umass_softc *sc,
 582                                 usbd_device_handle udev,
 583                                 usb_device_request_t *req,
 584                                 void *buffer, int buflen, int flags,
 585                                 usbd_xfer_handle xfer);
 586 Static void umass_clear_endpoint_stall  (struct umass_softc *sc,
 587                                 u_int8_t endpt, usbd_pipe_handle pipe,
 588                                 int state, usbd_xfer_handle xfer);
 589 Static void umass_reset         (struct umass_softc *sc,
 590                                 transfer_cb_f cb, void *priv);
 591
 592 /* Bulk-Only related functions */
 593 Static void umass_bbb_reset     (struct umass_softc *sc, int status);
 594 Static void umass_bbb_transfer  (struct umass_softc *sc, int lun,
 595                                 void *cmd, int cmdlen,
 596                                 void *data, int datalen, int dir,
 597                                 transfer_cb_f cb, void *priv);
 598 Static void umass_bbb_state     (usbd_xfer_handle xfer,
 599                                 usbd_private_handle priv,
 600                                 usbd_status err);
 601 Static int umass_bbb_get_max_lun
 602                                 (struct umass_softc *sc);
 603
 604 /* CBI related functions */
 605 Static int umass_cbi_adsc       (struct umass_softc *sc,
 606                                 char *buffer, int buflen,
 607                                 usbd_xfer_handle xfer);
 608 Static void umass_cbi_reset     (struct umass_softc *sc, int status);
 609 Static void umass_cbi_transfer  (struct umass_softc *sc, int lun,
 610                                 void *cmd, int cmdlen,
 611                                 void *data, int datalen, int dir,
 612                                 transfer_cb_f cb, void *priv);
 613 Static void umass_cbi_state     (usbd_xfer_handle xfer,
 614                                 usbd_private_handle priv, usbd_status err);
 615
 616 /* CAM related functions */
 617 Static void umass_cam_action    (struct cam_sim *sim, union ccb *ccb);
 618 Static void umass_cam_poll      (struct cam_sim *sim);
 619
 620 Static void umass_cam_cb        (struct umass_softc *sc, void *priv,
 621                                 int residue, int status);
 622 Static void umass_cam_sense_cb  (struct umass_softc *sc, void *priv,
 623                                 int residue, int status);
 624 Static void umass_cam_quirk_cb  (struct umass_softc *sc, void *priv,
 625                                 int residue, int status);
 626
 627 Static void umass_cam_rescan_callback
 628                                 (struct cam_periph *periph,union ccb *ccb);
 629 Static void umass_cam_rescan    (void *addr);
 630
 631 Static int umass_cam_attach_sim (struct umass_softc *sc);
 632 Static int umass_cam_attach     (struct umass_softc *sc);
 633 Static int umass_cam_detach_sim (struct umass_softc *sc);
 634
 635
 636 /* SCSI specific functions */
 637 Static int umass_scsi_transform (struct umass_softc *sc,
 638                                 unsigned char *cmd, int cmdlen,
 639                                 unsigned char **rcmd, int *rcmdlen);
 640
 641 /* UFI specific functions */
 642 #define UFI_COMMAND_LENGTH      12      /* UFI commands are always 12 bytes */
 643 Static int umass_ufi_transform  (struct umass_softc *sc,
 644                                 unsigned char *cmd, int cmdlen,
 645                                 unsigned char **rcmd, int *rcmdlen);
 646
 647 /* ATAPI (8070i) specific functions */
 648 #define ATAPI_COMMAND_LENGTH    12      /* ATAPI commands are always 12 bytes */
 649 Static int umass_atapi_transform        (struct umass_softc *sc,
 650                                 unsigned char *cmd, int cmdlen,
 651                                 unsigned char **rcmd, int *rcmdlen);
 652
 653 /* RBC specific functions */
 654 Static int umass_rbc_transform  (struct umass_softc *sc,
 655                                 unsigned char *cmd, int cmdlen,
 656                                 unsigned char **rcmd, int *rcmdlen);
 657
 658 #ifdef USB_DEBUG
 659 /* General debugging functions */
 660 Static void umass_bbb_dump_cbw  (struct umass_softc *sc, umass_bbb_cbw_t *cbw);
 661 Static void umass_bbb_dump_csw  (struct umass_softc *sc, umass_bbb_csw_t *csw);
 662 Static void umass_cbi_dump_cmd  (struct umass_softc *sc, void *cmd, int cmdlen);
 663 Static void umass_dump_buffer   (struct umass_softc *sc, u_int8_t *buffer,
 664                                 int buflen, int printlen);
 665 #endif
 666
 667 #if defined(__FreeBSD__) || defined(__DragonFly__)
 668 MODULE_DEPEND(umass, cam, 1,1,1);
 669 #endif
 670
 671 /*
 672  * USB device probe/attach/detach
 673  */
 674
 675 /*
 676  * Match the device we are seeing with the devices supported. Fill in the
 677  * description in the softc accordingly. This function is called from both
 678  * probe and attach.
 679  */
 680
 681 Static int
 682 umass_match_proto(struct umass_softc *sc, usbd_interface_handle iface,
 683                   usbd_device_handle udev)
 684 {
 685         usb_device_descriptor_t *dd;
 686         usb_interface_descriptor_t *id;
 687         int i;
 688         int found = 0;
 689
 690         sc->sc_udev = udev;
 691         sc->proto = 0;
 692         sc->quirks = 0;
 693
 694         dd = usbd_get_device_descriptor(udev);
 695
 696         /* An entry specifically for Y-E Data devices as they don't fit in the
 697          * device description table.
 698          */
 699         if (UGETW(dd->idVendor) == USB_VENDOR_YEDATA
 700             && UGETW(dd->idProduct) == USB_PRODUCT_YEDATA_FLASHBUSTERU) {
 701
 702                 /* Revisions < 1.28 do not handle the inerrupt endpoint
 703                  * very well.
 704                  */
 705                 if (UGETW(dd->bcdDevice) < 0x128) {
 706                         sc->proto = UMASS_PROTO_UFI | UMASS_PROTO_CBI;
 707                 } else {
 708                         sc->proto = UMASS_PROTO_UFI | UMASS_PROTO_CBI_I;
 709                 }
 710
 711                 /*
 712                  * Revisions < 1.28 do not have the TEST UNIT READY command
 713                  * Revisions == 1.28 have a broken TEST UNIT READY
 714                  */
 715                 if (UGETW(dd->bcdDevice) <= 0x128)
 716                         sc->quirks |= NO_TEST_UNIT_READY;
 717
 718                 sc->quirks |= RS_NO_CLEAR_UA | FLOPPY_SPEED;
 719                 return(UMATCH_VENDOR_PRODUCT);
 720         }
 721
 722         /* Check the list of supported devices for a match. While looking,
 723          * check for wildcarded and fully matched. First match wins.
 724          */
 725         for (i = 0; umass_devdescrs[i].vid != VID_EOT && !found; i++) {
 726                 if (umass_devdescrs[i].vid == VID_WILDCARD &&
 727                     umass_devdescrs[i].pid == PID_WILDCARD &&
 728                     umass_devdescrs[i].rid == RID_WILDCARD) {
 729                         printf("umass: ignoring invalid wildcard quirk\n");
 730                         continue;
 731                 }
 732                 if ((umass_devdescrs[i].vid == UGETW(dd->idVendor) ||
 733                      umass_devdescrs[i].vid == VID_WILDCARD)
 734                  && (umass_devdescrs[i].pid == UGETW(dd->idProduct) ||
 735                      umass_devdescrs[i].pid == PID_WILDCARD)) {
 736                         if (umass_devdescrs[i].rid == RID_WILDCARD) {
 737                                 sc->proto = umass_devdescrs[i].proto;
 738                                 sc->quirks = umass_devdescrs[i].quirks;
 739                                 return (UMATCH_VENDOR_PRODUCT);
 740                         } else if (umass_devdescrs[i].rid ==
 741                             UGETW(dd->bcdDevice)) {
 742                                 sc->proto = umass_devdescrs[i].proto;
 743                                 sc->quirks = umass_devdescrs[i].quirks;
 744                                 return (UMATCH_VENDOR_PRODUCT_REV);
 745                         } /* else RID does not match */
 746                 }
 747         }
 748
 749         /* Check for a standards compliant device */
 750
 751         id = usbd_get_interface_descriptor(iface);
 752         if (id == NULL || id->bInterfaceClass != UICLASS_MASS)
 753                 return(UMATCH_NONE);
 754
 755         switch (id->bInterfaceSubClass) {
 756         case UISUBCLASS_SCSI:
 757                 sc->proto |= UMASS_PROTO_SCSI;
 758                 break;
 759         case UISUBCLASS_UFI:
 760                 sc->proto |= UMASS_PROTO_UFI;
 761                 break;
 762         case UISUBCLASS_RBC:
 763                 sc->proto |= UMASS_PROTO_RBC;
 764                 break;
 765         case UISUBCLASS_SFF8020I:
 766         case UISUBCLASS_SFF8070I:
 767                 sc->proto |= UMASS_PROTO_ATAPI;
 768                 break;
 769         default:
 770                 DPRINTF(UDMASS_GEN, ("%s: Unsupported command protocol %d\n",
 771                         USBDEVNAME(sc->sc_dev), id->bInterfaceSubClass));
 772                 return(UMATCH_NONE);
 773         }
 774
 775         switch (id->bInterfaceProtocol) {
 776         case UIPROTO_MASS_CBI:
 777                 sc->proto |= UMASS_PROTO_CBI;
 778                 break;
 779         case UIPROTO_MASS_CBI_I:
 780                 sc->proto |= UMASS_PROTO_CBI_I;
 781                 break;
 782         case UIPROTO_MASS_BBB_OLD:
 783         case UIPROTO_MASS_BBB:
 784                 sc->proto |= UMASS_PROTO_BBB;
 785                 break;
 786         default:
 787                 DPRINTF(UDMASS_GEN, ("%s: Unsupported wire protocol %d\n",
 788                         USBDEVNAME(sc->sc_dev), id->bInterfaceProtocol));
 789                 return(UMATCH_NONE);
 790         }
 791
 792         return(UMATCH_DEVCLASS_DEVSUBCLASS_DEVPROTO);
 793 }
 794
 795 USB_MATCH(umass)
 796 {
 797         USB_MATCH_START(umass, uaa);
 798         struct umass_softc *sc = device_get_softc(self);
 799
 800         USB_MATCH_SETUP;
 801
 802         if (uaa->iface == NULL)
 803                 return(UMATCH_NONE);
 804
 805         return(umass_match_proto(sc, uaa->iface, uaa->device));
 806 }
 807
 808 USB_ATTACH(umass)
 809 {
 810         USB_ATTACH_START(umass, sc, uaa);
 811         usb_interface_descriptor_t *id;
 812         usb_endpoint_descriptor_t *ed;
 813         char devinfo[1024];
 814         int i;
 815         int err;
 816
 817         /*
 818          * the softc struct is bzero-ed in device_set_driver. We can safely
 819          * call umass_detach without specifically initialising the struct.
 820          */
 821
 822         usbd_devinfo(uaa->device, 0, devinfo);
 823         USB_ATTACH_SETUP;
 824
 825         sc->iface = uaa->iface;
 826         sc->ifaceno = uaa->ifaceno;
 827
 828         /* initialise the proto and drive values in the umass_softc (again) */
 829         (void) umass_match_proto(sc, sc->iface, uaa->device);
 830
 831         id = usbd_get_interface_descriptor(sc->iface);
 832         printf("%s: %s\n", USBDEVNAME(sc->sc_dev), devinfo);
 833 #ifdef USB_DEBUG
 834         printf("%s: ", USBDEVNAME(sc->sc_dev));
 835         switch (sc->proto&UMASS_PROTO_COMMAND) {
 836         case UMASS_PROTO_SCSI:
 837                 printf("SCSI");
 838                 break;
 839         case UMASS_PROTO_ATAPI:
 840                 printf("8070i (ATAPI)");
 841                 break;
 842         case UMASS_PROTO_UFI:
 843                 printf("UFI");
 844                 break;
 845         case UMASS_PROTO_RBC:
 846                 printf("RBC");
 847                 break;
 848         default:
 849                 printf("(unknown 0x%02x)", sc->proto&UMASS_PROTO_COMMAND);
 850                 break;
 851         }
 852         printf(" over ");
 853         switch (sc->proto&UMASS_PROTO_WIRE) {
 854         case UMASS_PROTO_BBB:
 855                 printf("Bulk-Only");
 856                 break;
 857         case UMASS_PROTO_CBI:                   /* uses Comand/Bulk pipes */
 858                 printf("CBI");
 859                 break;
 860         case UMASS_PROTO_CBI_I:         /* uses Comand/Bulk/Interrupt pipes */
 861                 printf("CBI with CCI");
 862 #ifndef CBI_I
 863                 printf(" (using CBI)");
 864 #endif
 865                 break;
 866         default:
 867                 printf("(unknown 0x%02x)", sc->proto&UMASS_PROTO_WIRE);
 868         }
 869         printf("; quirks = 0x%04x\n", sc->quirks);
 870 #endif
 871
 872 #ifndef CBI_I
 873         if (sc->proto & UMASS_PROTO_CBI_I) {
 874                 /* See beginning of file for comment on the use of CBI with CCI */
 875                 sc->proto = (sc->proto & ~UMASS_PROTO_CBI_I) | UMASS_PROTO_CBI;
 876         }
 877 #endif
 878
 879         if (sc->quirks & ALT_IFACE_1) {
 880                 err = usbd_set_interface(0, 1);
 881                 if (err) {
 882                         DPRINTF(UDMASS_USB, ("%s: could not switch to "
 883                                 "Alt Interface %d\n",
 884                                 USBDEVNAME(sc->sc_dev), 1));
 885                         umass_detach(self);
 886                         USB_ATTACH_ERROR_RETURN;
 887                 }
 888         }
 889
 890         /*
 891          * In addition to the Control endpoint the following endpoints
 892          * are required:
 893          * a) bulk-in endpoint.
 894          * b) bulk-out endpoint.
 895          * and for Control/Bulk/Interrupt with CCI (CBI_I)
 896          * c) intr-in
 897          *
 898          * The endpoint addresses are not fixed, so we have to read them
 899          * from the device descriptors of the current interface.
 900          */
 901         for (i = 0 ; i < id->bNumEndpoints ; i++) {
 902                 ed = usbd_interface2endpoint_descriptor(sc->iface, i);
 903                 if (!ed) {
 904                         printf("%s: could not read endpoint descriptor\n",
 905                                USBDEVNAME(sc->sc_dev));
 906                         USB_ATTACH_ERROR_RETURN;
 907                 }
 908                 if (UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_IN
 909                     && (ed->bmAttributes & UE_XFERTYPE) == UE_BULK) {
 910                         sc->bulkin = ed->bEndpointAddress;
 911                 } else if (UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_OUT
 912                     && (ed->bmAttributes & UE_XFERTYPE) == UE_BULK) {
 913                         sc->bulkout = ed->bEndpointAddress;
 914                 } else if (sc->proto & UMASS_PROTO_CBI_I
 915                     && UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_IN
 916                     && (ed->bmAttributes & UE_XFERTYPE) == UE_INTERRUPT) {
 917                         sc->intrin = ed->bEndpointAddress;
 918 #ifdef USB_DEBUG
 919                         if (UGETW(ed->wMaxPacketSize) > 2) {
 920                                 DPRINTF(UDMASS_CBI, ("%s: intr size is %d\n",
 921                                         USBDEVNAME(sc->sc_dev),
 922                                         UGETW(ed->wMaxPacketSize)));
 923                         }
 924 #endif
 925                 }
 926         }
 927
 928         /* check whether we found all the endpoints we need */
 929         if (!sc->bulkin || !sc->bulkout
 930             || (sc->proto & UMASS_PROTO_CBI_I && !sc->intrin) ) {
 931                 DPRINTF(UDMASS_USB, ("%s: endpoint not found %d/%d/%d\n",
 932                         USBDEVNAME(sc->sc_dev),
 933                         sc->bulkin, sc->bulkout, sc->intrin));
 934                 umass_detach(self);
 935                 USB_ATTACH_ERROR_RETURN;
 936         }
 937
 938         /* Open the bulk-in and -out pipe */
 939         err = usbd_open_pipe(sc->iface, sc->bulkout,
 940                                 USBD_EXCLUSIVE_USE, &sc->bulkout_pipe);
 941         if (err) {
 942                 DPRINTF(UDMASS_USB, ("%s: cannot open %d-out pipe (bulk)\n",
 943                         USBDEVNAME(sc->sc_dev), sc->bulkout));
 944                 umass_detach(self);
 945                 USB_ATTACH_ERROR_RETURN;
 946         }
 947         err = usbd_open_pipe(sc->iface, sc->bulkin,
 948                                 USBD_EXCLUSIVE_USE, &sc->bulkin_pipe);
 949         if (err) {
 950                 DPRINTF(UDMASS_USB, ("%s: could not open %d-in pipe (bulk)\n",
 951                         USBDEVNAME(sc->sc_dev), sc->bulkin));
 952                 umass_detach(self);
 953                 USB_ATTACH_ERROR_RETURN;
 954         }
 955         /* Open the intr-in pipe if the protocol is CBI with CCI.
 956          * Note: early versions of the Zip drive do have an interrupt pipe, but
 957          * this pipe is unused
 958          *
 959          * We do not open the interrupt pipe as an interrupt pipe, but as a
 960          * normal bulk endpoint. We send an IN transfer down the wire at the
 961          * appropriate time, because we know exactly when to expect data on
 962          * that endpoint. This saves bandwidth, but more important, makes the
 963          * code for handling the data on that endpoint simpler. No data
 964          * arriving concurently.
 965          */
 966         if (sc->proto & UMASS_PROTO_CBI_I) {
 967                 err = usbd_open_pipe(sc->iface, sc->intrin,
 968                                 USBD_EXCLUSIVE_USE, &sc->intrin_pipe);
 969                 if (err) {
 970                         DPRINTF(UDMASS_USB, ("%s: couldn't open %d-in (intr)\n",
 971                                 USBDEVNAME(sc->sc_dev), sc->intrin));
 972                         umass_detach(self);
 973                         USB_ATTACH_ERROR_RETURN;
 974                 }
 975         }
 976
 977         /* initialisation of generic part */
 978         sc->transfer_state = TSTATE_ATTACH;
 979
 980         /* request a sufficient number of xfer handles */
 981         for (i = 0; i < XFER_NR; i++) {
 982                 sc->transfer_xfer[i] = usbd_alloc_xfer(uaa->device);
 983                 if (!sc->transfer_xfer[i]) {
 984                         DPRINTF(UDMASS_USB, ("%s: Out of memory\n",
 985                                 USBDEVNAME(sc->sc_dev)));
 986                         umass_detach(self);
 987                         USB_ATTACH_ERROR_RETURN;
 988                 }
 989         }
 990
 991         /* Initialise the wire protocol specific methods */
 992         if (sc->proto & UMASS_PROTO_BBB) {
 993                 sc->reset = umass_bbb_reset;
 994                 sc->transfer = umass_bbb_transfer;
 995                 sc->state = umass_bbb_state;
 996         } else if (sc->proto & (UMASS_PROTO_CBI|UMASS_PROTO_CBI_I)) {
 997                 sc->reset = umass_cbi_reset;
 998                 sc->transfer = umass_cbi_transfer;
 999                 sc->state = umass_cbi_state;
1000 #ifdef USB_DEBUG
1001         } else {
1002                 panic("%s:%d: Unknown proto 0x%02x",
1003                       __FILE__, __LINE__, sc->proto);
1004 #endif
1005         }
1006
1007         if (sc->proto & UMASS_PROTO_SCSI)
1008                 sc->transform = umass_scsi_transform;
1009         else if (sc->proto & UMASS_PROTO_UFI)
1010                 sc->transform = umass_ufi_transform;
1011         else if (sc->proto & UMASS_PROTO_ATAPI)
1012                 sc->transform = umass_atapi_transform;
1013         else if (sc->proto & UMASS_PROTO_RBC)
1014                 sc->transform = umass_rbc_transform;
1015 #ifdef USB_DEBUG
1016         else
1017                 panic("No transformation defined for command proto 0x%02x",
1018                       sc->proto & UMASS_PROTO_COMMAND);
1019 #endif
1020
1021         /* From here onwards the device can be used. */
1022
1023         if (sc->quirks & SHUTTLE_INIT)
1024                 umass_init_shuttle(sc);
1025
1026         /* Get the maximum LUN supported by the device.
1027          */
1028         if ((sc->proto & UMASS_PROTO_WIRE) == UMASS_PROTO_BBB)
1029                 sc->maxlun = umass_bbb_get_max_lun(sc);
1030         else
1031                 sc->maxlun = 0;
1032
1033         if ((sc->proto & UMASS_PROTO_SCSI) ||
1034             (sc->proto & UMASS_PROTO_ATAPI) ||
1035             (sc->proto & UMASS_PROTO_UFI) ||
1036             (sc->proto & UMASS_PROTO_RBC)) {
1037                 /* Prepare the SCSI command block */
1038                 sc->cam_scsi_sense.opcode = REQUEST_SENSE;
1039                 sc->cam_scsi_test_unit_ready.opcode = TEST_UNIT_READY;
1040
1041                 /* register the SIM */
1042                 err = umass_cam_attach_sim(sc);
1043                 if (err) {
1044                         umass_detach(self);
1045                         USB_ATTACH_ERROR_RETURN;
1046                 }
1047                 /* scan the new sim */
1048                 err = umass_cam_attach(sc);
1049                 if (err) {
1050                         umass_cam_detach_sim(sc);
1051                         umass_detach(self);
1052                         USB_ATTACH_ERROR_RETURN;
1053                 }
1054         } else {
1055                 panic("%s:%d: Unknown proto 0x%02x",
1056                       __FILE__, __LINE__, sc->proto);
1057         }
1058
1059         sc->transfer_state = TSTATE_IDLE;
1060         DPRINTF(UDMASS_GEN, ("%s: Attach finished\n", USBDEVNAME(sc->sc_dev)));
1061
1062         USB_ATTACH_SUCCESS_RETURN;
1063 }
1064
1065 USB_DETACH(umass)
1066 {
1067         USB_DETACH_START(umass, sc);
1068         int err = 0;
1069         int i;
1070
1071         DPRINTF(UDMASS_USB, ("%s: detached\n", USBDEVNAME(sc->sc_dev)));
1072
1073         sc->flags |= UMASS_FLAGS_GONE;
1074
1075         if ((sc->proto & UMASS_PROTO_SCSI) ||
1076             (sc->proto & UMASS_PROTO_ATAPI) ||
1077             (sc->proto & UMASS_PROTO_UFI) ||
1078             (sc->proto & UMASS_PROTO_RBC))
1079                 /* detach the SCSI host controller (SIM) */
1080                 err = umass_cam_detach_sim(sc);
1081
1082         for (i = 0; i < XFER_NR; i++)
1083                 if (sc->transfer_xfer[i])
1084                         usbd_free_xfer(sc->transfer_xfer[i]);
1085
1086         /* remove all the pipes */
1087         if (sc->bulkout_pipe)
1088                 usbd_close_pipe(sc->bulkout_pipe);
1089         if (sc->bulkin_pipe)
1090                 usbd_close_pipe(sc->bulkin_pipe);
1091         if (sc->intrin_pipe)
1092                 usbd_close_pipe(sc->intrin_pipe);
1093
1094         return(err);
1095 }
1096
1097 Static void
1098 umass_init_shuttle(struct umass_softc *sc)
1099 {
1100         usb_device_request_t req;
1101         u_char status[2];
1102
1103         /* The Linux driver does this, but no one can tell us what the
1104          * command does.
1105          */
1106         req.bmRequestType = UT_READ_VENDOR_DEVICE;
1107         req.bRequest = 1;       /* XXX unknown command */
1108         USETW(req.wValue, 0);
1109         USETW(req.wIndex, sc->ifaceno);
1110         USETW(req.wLength, sizeof status);
1111         (void) usbd_do_request(sc->sc_udev, &req, &status);
1112
1113         DPRINTF(UDMASS_GEN, ("%s: Shuttle init returned 0x%02x%02x\n",
1114                 USBDEVNAME(sc->sc_dev), status[0], status[1]));
1115 }
1116
1117  /*
1118  * Generic functions to handle transfers
1119  */
1120
1121 Static usbd_status
1122 umass_setup_transfer(struct umass_softc *sc, usbd_pipe_handle pipe,
1123                         void *buffer, int buflen, int flags,
1124                         usbd_xfer_handle xfer)
1125 {
1126         usbd_status err;
1127
1128         /* Initialiase a USB transfer and then schedule it */
1129
1130         (void) usbd_setup_xfer(xfer, pipe, (void *) sc, buffer, buflen, flags,
1131                         UMASS_TIMEOUT, sc->state);
1132
1133         err = usbd_transfer(xfer);
1134         if (err && err != USBD_IN_PROGRESS) {
1135                 DPRINTF(UDMASS_BBB, ("%s: failed to setup transfer, %s\n",
1136                         USBDEVNAME(sc->sc_dev), usbd_errstr(err)));
1137                 return(err);
1138         }
1139
1140         return (USBD_NORMAL_COMPLETION);
1141 }
1142
1143
1144 Static usbd_status
1145 umass_setup_ctrl_transfer(struct umass_softc *sc, usbd_device_handle udev,
1146          usb_device_request_t *req,
1147          void *buffer, int buflen, int flags,
1148          usbd_xfer_handle xfer)
1149 {
1150         usbd_status err;
1151
1152         /* Initialiase a USB control transfer and then schedule it */
1153
1154         (void) usbd_setup_default_xfer(xfer, udev, (void *) sc,
1155                         UMASS_TIMEOUT, req, buffer, buflen, flags, sc->state);
1156
1157         err = usbd_transfer(xfer);
1158         if (err && err != USBD_IN_PROGRESS) {
1159                 DPRINTF(UDMASS_BBB, ("%s: failed to setup ctrl transfer, %s\n",
1160                          USBDEVNAME(sc->sc_dev), usbd_errstr(err)));
1161
1162                 /* do not reset, as this would make us loop */
1163                 return(err);
1164         }
1165
1166         return (USBD_NORMAL_COMPLETION);
1167 }
1168
1169 Static void
1170 umass_clear_endpoint_stall(struct umass_softc *sc,
1171                                 u_int8_t endpt, usbd_pipe_handle pipe,
1172                                 int state, usbd_xfer_handle xfer)
1173 {
1174         usbd_device_handle udev;
1175
1176         DPRINTF(UDMASS_BBB, ("%s: Clear endpoint 0x%02x stall\n",
1177                 USBDEVNAME(sc->sc_dev), endpt));
1178
1179         usbd_interface2device_handle(sc->iface, &udev);
1180
1181         sc->transfer_state = state;
1182
1183         usbd_clear_endpoint_toggle(pipe);
1184
1185         sc->request.bmRequestType = UT_WRITE_ENDPOINT;
1186         sc->request.bRequest = UR_CLEAR_FEATURE;
1187         USETW(sc->request.wValue, UF_ENDPOINT_HALT);
1188         USETW(sc->request.wIndex, endpt);
1189         USETW(sc->request.wLength, 0);
1190         umass_setup_ctrl_transfer(sc, udev, &sc->request, NULL, 0, 0, xfer);
1191 }
1192
1193 Static void
1194 umass_reset(struct umass_softc *sc, transfer_cb_f cb, void *priv)
1195 {
1196         sc->transfer_cb = cb;
1197         sc->transfer_priv = priv;
1198
1199         /* The reset is a forced reset, so no error (yet) */
1200         sc->reset(sc, STATUS_CMD_OK);
1201 }
1202
1203 /*
1204  * Bulk protocol specific functions
1205  */
1206
1207 Static void
1208 umass_bbb_reset(struct umass_softc *sc, int status)
1209 {
1210         usbd_device_handle udev;
1211
1212         KASSERT(sc->proto & UMASS_PROTO_BBB,
1213                 ("%s: umass_bbb_reset: wrong sc->proto 0x%02x\n",
1214                         USBDEVNAME(sc->sc_dev), sc->proto));
1215
1216         /*
1217          * Reset recovery (5.3.4 in Universal Serial Bus Mass Storage Class)
1218          *
1219          * For Reset Recovery the host shall issue in the following order:
1220          * a) a Bulk-Only Mass Storage Reset
1221          * b) a Clear Feature HALT to the Bulk-In endpoint
1222          * c) a Clear Feature HALT to the Bulk-Out endpoint
1223          *
1224          * This is done in 3 steps, states:
1225          * TSTATE_BBB_RESET1
1226          * TSTATE_BBB_RESET2
1227          * TSTATE_BBB_RESET3
1228          *
1229          * If the reset doesn't succeed, the device should be port reset.
1230          */
1231
1232         DPRINTF(UDMASS_BBB, ("%s: Bulk Reset\n",
1233                 USBDEVNAME(sc->sc_dev)));
1234
1235         sc->transfer_state = TSTATE_BBB_RESET1;
1236         sc->transfer_status = status;
1237
1238         usbd_interface2device_handle(sc->iface, &udev);
1239
1240         /* reset is a class specific interface write */
1241         sc->request.bmRequestType = UT_WRITE_CLASS_INTERFACE;
1242         sc->request.bRequest = UR_BBB_RESET;
1243         USETW(sc->request.wValue, 0);
1244         USETW(sc->request.wIndex, sc->ifaceno);
1245         USETW(sc->request.wLength, 0);
1246         umass_setup_ctrl_transfer(sc, udev, &sc->request, NULL, 0, 0,
1247                                   sc->transfer_xfer[XFER_BBB_RESET1]);
1248 }
1249
1250 Static void
1251 umass_bbb_transfer(struct umass_softc *sc, int lun, void *cmd, int cmdlen,
1252                     void *data, int datalen, int dir,
1253                     transfer_cb_f cb, void *priv)
1254 {
1255         KASSERT(sc->proto & UMASS_PROTO_BBB,
1256                 ("%s: umass_bbb_transfer: wrong sc->proto 0x%02x\n",
1257                         USBDEVNAME(sc->sc_dev), sc->proto));
1258
1259         /*
1260          * Do a Bulk-Only transfer with cmdlen bytes from cmd, possibly
1261          * a data phase of datalen bytes from/to the device and finally a
1262          * csw read phase.
1263          * If the data direction was inbound a maximum of datalen bytes
1264          * is stored in the buffer pointed to by data.
1265          *
1266          * umass_bbb_transfer initialises the transfer and lets the state
1267          * machine in umass_bbb_state handle the completion. It uses the
1268          * following states:
1269          * TSTATE_BBB_COMMAND
1270          *   -> TSTATE_BBB_DATA
1271          *   -> TSTATE_BBB_STATUS
1272          *   -> TSTATE_BBB_STATUS2
1273          *   -> TSTATE_BBB_IDLE
1274          *
1275          * An error in any of those states will invoke
1276          * umass_bbb_reset.
1277          */
1278
1279         /* check the given arguments */
1280         KASSERT(datalen == 0 || data != NULL,
1281                 ("%s: datalen > 0, but no buffer",USBDEVNAME(sc->sc_dev)));
1282         KASSERT(cmdlen <= CBWCDBLENGTH,
1283                 ("%s: cmdlen exceeds CDB length in CBW (%d > %d)",
1284                         USBDEVNAME(sc->sc_dev), cmdlen, CBWCDBLENGTH));
1285         KASSERT(dir == DIR_NONE || datalen > 0,
1286                 ("%s: datalen == 0 while direction is not NONE\n",
1287                         USBDEVNAME(sc->sc_dev)));
1288         KASSERT(datalen == 0 || dir != DIR_NONE,
1289                 ("%s: direction is NONE while datalen is not zero\n",
1290                         USBDEVNAME(sc->sc_dev)));
1291         KASSERT(sizeof(umass_bbb_cbw_t) == UMASS_BBB_CBW_SIZE,
1292                 ("%s: CBW struct does not have the right size (%ld vs. %d)\n",
1293                         USBDEVNAME(sc->sc_dev),
1294                         (long)sizeof(umass_bbb_cbw_t), UMASS_BBB_CBW_SIZE));
1295         KASSERT(sizeof(umass_bbb_csw_t) == UMASS_BBB_CSW_SIZE,
1296                 ("%s: CSW struct does not have the right size (%ld vs. %d)\n",
1297                         USBDEVNAME(sc->sc_dev),
1298                         (long)sizeof(umass_bbb_csw_t), UMASS_BBB_CSW_SIZE));
1299
1300         /*
1301          * Determine the direction of the data transfer and the length.
1302          *
1303          * dCBWDataTransferLength (datalen) :
1304          *   This field indicates the number of bytes of data that the host
1305          *   intends to transfer on the IN or OUT Bulk endpoint(as indicated by
1306          *   the Direction bit) during the execution of this command. If this
1307          *   field is set to 0, the device will expect that no data will be
1308          *   transferred IN or OUT during this command, regardless of the value
1309          *   of the Direction bit defined in dCBWFlags.
1310          *
1311          * dCBWFlags (dir) :
1312          *   The bits of the Flags field are defined as follows:
1313          *     Bits 0-6  reserved
1314          *     Bit  7    Direction - this bit shall be ignored if the
1315          *                           dCBWDataTransferLength field is zero.
1316          *               0 = data Out from host to device
1317          *               1 = data In from device to host
1318          */
1319
1320         /* Fill in the Command Block Wrapper
1321          * We fill in all the fields, so there is no need to bzero it first.
1322          */
1323         USETDW(sc->cbw.dCBWSignature, CBWSIGNATURE);
1324         /* We don't care about the initial value, as long as the values are unique */
1325         USETDW(sc->cbw.dCBWTag, UGETDW(sc->cbw.dCBWTag) + 1);
1326         USETDW(sc->cbw.dCBWDataTransferLength, datalen);
1327         /* DIR_NONE is treated as DIR_OUT (0x00) */
1328         sc->cbw.bCBWFlags = (dir == DIR_IN? CBWFLAGS_IN:CBWFLAGS_OUT);
1329         sc->cbw.bCBWLUN = lun;
1330         sc->cbw.bCDBLength = cmdlen;
1331         bcopy(cmd, sc->cbw.CBWCDB, cmdlen);
1332
1333         DIF(UDMASS_BBB, umass_bbb_dump_cbw(sc, &sc->cbw));
1334
1335         /* store the details for the data transfer phase */
1336         sc->transfer_dir = dir;
1337         sc->transfer_data = data;
1338         sc->transfer_datalen = datalen;
1339         sc->transfer_actlen = 0;
1340         sc->transfer_cb = cb;
1341         sc->transfer_priv = priv;
1342         sc->transfer_status = STATUS_CMD_OK;
1343
1344         /* move from idle to the command state */
1345         sc->transfer_state = TSTATE_BBB_COMMAND;
1346
1347         /* Send the CBW from host to device via bulk-out endpoint. */
1348         if (umass_setup_transfer(sc, sc->bulkout_pipe,
1349                         &sc->cbw, UMASS_BBB_CBW_SIZE, 0,
1350                         sc->transfer_xfer[XFER_BBB_CBW])) {
1351                 umass_bbb_reset(sc, STATUS_WIRE_FAILED);
1352         }
1353 }
1354
1355
1356 Static void
1357 umass_bbb_state(usbd_xfer_handle xfer, usbd_private_handle priv,
1358                 usbd_status err)
1359 {
1360         struct umass_softc *sc = (struct umass_softc *) priv;
1361         usbd_xfer_handle next_xfer;
1362
1363         KASSERT(sc->proto & UMASS_PROTO_BBB,
1364                 ("%s: umass_bbb_state: wrong sc->proto 0x%02x\n",
1365                         USBDEVNAME(sc->sc_dev), sc->proto));
1366
1367         /*
1368          * State handling for BBB transfers.
1369          *
1370          * The subroutine is rather long. It steps through the states given in
1371          * Annex A of the Bulk-Only specification.
1372          * Each state first does the error handling of the previous transfer
1373          * and then prepares the next transfer.
1374          * Each transfer is done asynchroneously so after the request/transfer
1375          * has been submitted you will find a 'return;'.
1376          */
1377
1378         DPRINTF(UDMASS_BBB, ("%s: Handling BBB state %d (%s), xfer=%p, %s\n",
1379                 USBDEVNAME(sc->sc_dev), sc->transfer_state,
1380                 states[sc->transfer_state], xfer, usbd_errstr(err)));
1381
1382         switch (sc->transfer_state) {
1383
1384         /***** Bulk Transfer *****/
1385         case TSTATE_BBB_COMMAND:
1386                 /* Command transport phase, error handling */
1387                 if (err) {
1388                         DPRINTF(UDMASS_BBB, ("%s: failed to send CBW\n",
1389                                 USBDEVNAME(sc->sc_dev)));
1390                         /* If the device detects that the CBW is invalid, then
1391                          * the device may STALL both bulk endpoints and require
1392                          * a Bulk-Reset
1393                          */
1394                         umass_bbb_reset(sc, STATUS_WIRE_FAILED);
1395                         return;
1396                 }
1397
1398                 /* Data transport phase, setup transfer */
1399                 sc->transfer_state = TSTATE_BBB_DATA;
1400                 if (sc->transfer_dir == DIR_IN) {
1401                         if (umass_setup_transfer(sc, sc->bulkin_pipe,
1402                                         sc->transfer_data, sc->transfer_datalen,
1403                                         USBD_SHORT_XFER_OK,
1404                                         sc->transfer_xfer[XFER_BBB_DATA]))
1405                                 umass_bbb_reset(sc, STATUS_WIRE_FAILED);
1406
1407                         return;
1408                 } else if (sc->transfer_dir == DIR_OUT) {
1409                         if (umass_setup_transfer(sc, sc->bulkout_pipe,
1410                                         sc->transfer_data, sc->transfer_datalen,
1411                                         0,      /* fixed length transfer */
1412                                         sc->transfer_xfer[XFER_BBB_DATA]))
1413                                 umass_bbb_reset(sc, STATUS_WIRE_FAILED);
1414
1415                         return;
1416                 } else {
1417                         DPRINTF(UDMASS_BBB, ("%s: no data phase\n",
1418                                 USBDEVNAME(sc->sc_dev)));
1419                 }
1420
1421                 /* FALLTHROUGH if no data phase, err == 0 */
1422         case TSTATE_BBB_DATA:
1423                 /* Command transport phase, error handling (ignored if no data
1424                  * phase (fallthrough from previous state)) */
1425                 if (sc->transfer_dir != DIR_NONE) {
1426                         /* retrieve the length of the transfer that was done */
1427                         usbd_get_xfer_status(xfer, NULL, NULL,
1428                                                 &sc->transfer_actlen, NULL);
1429
1430                         if (err) {
1431                                 DPRINTF(UDMASS_BBB, ("%s: Data-%s %db failed, "
1432                                         "%s\n", USBDEVNAME(sc->sc_dev),
1433                                         (sc->transfer_dir == DIR_IN?"in":"out"),
1434                                         sc->transfer_datalen,usbd_errstr(err)));
1435
1436                                 if (err == USBD_STALLED) {
1437                                         umass_clear_endpoint_stall(sc,
1438                                           (sc->transfer_dir == DIR_IN?
1439                                             sc->bulkin:sc->bulkout),
1440                                           (sc->transfer_dir == DIR_IN?
1441                                             sc->bulkin_pipe:sc->bulkout_pipe),
1442                                           TSTATE_BBB_DCLEAR,
1443                                           sc->transfer_xfer[XFER_BBB_DCLEAR]);
1444                                         return;
1445                                 } else {
1446                                         /* Unless the error is a pipe stall the
1447                                          * error is fatal.
1448                                          */
1449                                         umass_bbb_reset(sc,STATUS_WIRE_FAILED);
1450                                         return;
1451                                 }
1452                         }
1453                 }
1454
1455                 DIF(UDMASS_BBB, if (sc->transfer_dir == DIR_IN)
1456                                         umass_dump_buffer(sc, sc->transfer_data,
1457                                                 sc->transfer_datalen, 48));
1458
1459
1460
1461                 /* FALLTHROUGH, err == 0 (no data phase or successfull) */
1462         case TSTATE_BBB_DCLEAR: /* stall clear after data phase */
1463         case TSTATE_BBB_SCLEAR: /* stall clear after status phase */
1464                 /* Reading of CSW after bulk stall condition in data phase
1465                  * (TSTATE_BBB_DATA2) or bulk-in stall condition after
1466                  * reading CSW (TSTATE_BBB_SCLEAR).
1467                  * In the case of no data phase or successfull data phase,
1468                  * err == 0 and the following if block is passed.
1469                  */
1470                 if (err) {      /* should not occur */
1471                         /* try the transfer below, even if clear stall failed */
1472                         DPRINTF(UDMASS_BBB, ("%s: bulk-%s stall clear failed"
1473                                 ", %s\n", USBDEVNAME(sc->sc_dev),
1474                                 (sc->transfer_dir == DIR_IN? "in":"out"),
1475                                 usbd_errstr(err)));
1476                         umass_bbb_reset(sc, STATUS_WIRE_FAILED);
1477                         return;
1478                 }
1479
1480                 /* Status transport phase, setup transfer */
1481                 if (sc->transfer_state == TSTATE_BBB_COMMAND ||
1482                     sc->transfer_state == TSTATE_BBB_DATA ||
1483                     sc->transfer_state == TSTATE_BBB_DCLEAR) {
1484                         /* After no data phase, successfull data phase and
1485                          * after clearing bulk-in/-out stall condition
1486                          */
1487                         sc->transfer_state = TSTATE_BBB_STATUS1;
1488                         next_xfer = sc->transfer_xfer[XFER_BBB_CSW1];
1489                 } else {
1490                         /* After first attempt of fetching CSW */
1491                         sc->transfer_state = TSTATE_BBB_STATUS2;
1492                         next_xfer = sc->transfer_xfer[XFER_BBB_CSW2];
1493                 }
1494
1495                 /* Read the Command Status Wrapper via bulk-in endpoint. */
1496                 if (umass_setup_transfer(sc, sc->bulkin_pipe,
1497                                 &sc->csw, UMASS_BBB_CSW_SIZE, 0,
1498                                 next_xfer)) {
1499                         umass_bbb_reset(sc, STATUS_WIRE_FAILED);
1500                         return;
1501                 }
1502
1503                 return;
1504         case TSTATE_BBB_STATUS1:        /* first attempt */
1505         case TSTATE_BBB_STATUS2:        /* second attempt */
1506                 /* Status transfer, error handling */
1507                 {
1508                 int Residue;
1509                 if (err) {
1510                         DPRINTF(UDMASS_BBB, ("%s: Failed to read CSW, %s%s\n",
1511                                 USBDEVNAME(sc->sc_dev), usbd_errstr(err),
1512                                 (sc->transfer_state == TSTATE_BBB_STATUS1?
1513                                         ", retrying":"")));
1514
1515                         /* If this was the first attempt at fetching the CSW
1516                          * retry it, otherwise fail.
1517                          */
1518                         if (sc->transfer_state == TSTATE_BBB_STATUS1) {
1519                                 umass_clear_endpoint_stall(sc,
1520                                             sc->bulkin, sc->bulkin_pipe,
1521                                             TSTATE_BBB_SCLEAR,
1522                                             sc->transfer_xfer[XFER_BBB_SCLEAR]);
1523                                 return;
1524                         } else {
1525                                 umass_bbb_reset(sc, STATUS_WIRE_FAILED);
1526                                 return;
1527                         }
1528                 }
1529
1530                 DIF(UDMASS_BBB, umass_bbb_dump_csw(sc, &sc->csw));
1531
1532                 /* Translate weird command-status signatures. */
1533                 if ((sc->quirks & WRONG_CSWSIG) &&
1534                     UGETDW(sc->csw.dCSWSignature) == CSWSIGNATURE_OLYMPUS_C1)
1535                         USETDW(sc->csw.dCSWSignature, CSWSIGNATURE);
1536
1537                 Residue = UGETDW(sc->csw.dCSWDataResidue);
1538                 if (Residue == 0 &&
1539                     sc->transfer_datalen - sc->transfer_actlen != 0)
1540                         Residue = sc->transfer_datalen - sc->transfer_actlen;
1541
1542                 /* Check CSW and handle any error */
1543                 if (UGETDW(sc->csw.dCSWSignature) != CSWSIGNATURE) {
1544                         /* Invalid CSW: Wrong signature or wrong tag might
1545                          * indicate that the device is confused -> reset it.
1546                          */
1547                         printf("%s: Invalid CSW: sig 0x%08x should be 0x%08x\n",
1548                                 USBDEVNAME(sc->sc_dev),
1549                                 UGETDW(sc->csw.dCSWSignature),
1550                                 CSWSIGNATURE);
1551
1552                         umass_bbb_reset(sc, STATUS_WIRE_FAILED);
1553                         return;
1554                 } else if (UGETDW(sc->csw.dCSWTag)
1555                                 != UGETDW(sc->cbw.dCBWTag)) {
1556                         printf("%s: Invalid CSW: tag %d should be %d\n",
1557                                 USBDEVNAME(sc->sc_dev),
1558                                 UGETDW(sc->csw.dCSWTag),
1559                                 UGETDW(sc->cbw.dCBWTag));
1560
1561                         umass_bbb_reset(sc, STATUS_WIRE_FAILED);
1562                         return;
1563
1564                 /* CSW is valid here */
1565                 } else if (sc->csw.bCSWStatus > CSWSTATUS_PHASE) {
1566                         printf("%s: Invalid CSW: status %d > %d\n",
1567                                 USBDEVNAME(sc->sc_dev),
1568                                 sc->csw.bCSWStatus,
1569                                 CSWSTATUS_PHASE);
1570
1571                         umass_bbb_reset(sc, STATUS_WIRE_FAILED);
1572                         return;
1573                 } else if (sc->csw.bCSWStatus == CSWSTATUS_PHASE) {
1574                         printf("%s: Phase Error, residue = %d\n",
1575                                 USBDEVNAME(sc->sc_dev), Residue);
1576
1577                         umass_bbb_reset(sc, STATUS_WIRE_FAILED);
1578                         return;
1579
1580                 } else if (sc->transfer_actlen > sc->transfer_datalen) {
1581                         /* Buffer overrun! Don't let this go by unnoticed */
1582                         panic("%s: transferred %db instead of %db",
1583                                 USBDEVNAME(sc->sc_dev),
1584                                 sc->transfer_actlen, sc->transfer_datalen);
1585
1586                 } else if (sc->csw.bCSWStatus == CSWSTATUS_FAILED) {
1587                         DPRINTF(UDMASS_BBB, ("%s: Command Failed, res = %d\n",
1588                                 USBDEVNAME(sc->sc_dev), Residue));
1589
1590                         /* SCSI command failed but transfer was succesful */
1591                         sc->transfer_state = TSTATE_IDLE;
1592                         sc->transfer_cb(sc, sc->transfer_priv, Residue,
1593                                         STATUS_CMD_FAILED);
1594                         return;
1595
1596                 } else {        /* success */
1597                         sc->transfer_state = TSTATE_IDLE;
1598                         sc->transfer_cb(sc, sc->transfer_priv, Residue,
1599                                         STATUS_CMD_OK);
1600
1601                         return;
1602                 }
1603                 }
1604
1605         /***** Bulk Reset *****/
1606         case TSTATE_BBB_RESET1:
1607                 if (err)
1608                         printf("%s: BBB reset failed, %s\n",
1609                                 USBDEVNAME(sc->sc_dev), usbd_errstr(err));
1610
1611                 umass_clear_endpoint_stall(sc,
1612                         sc->bulkin, sc->bulkin_pipe, TSTATE_BBB_RESET2,
1613                         sc->transfer_xfer[XFER_BBB_RESET2]);
1614
1615                 return;
1616         case TSTATE_BBB_RESET2:
1617                 if (err)        /* should not occur */
1618                         printf("%s: BBB bulk-in clear stall failed, %s\n",
1619                                USBDEVNAME(sc->sc_dev), usbd_errstr(err));
1620                         /* no error recovery, otherwise we end up in a loop */
1621
1622                 umass_clear_endpoint_stall(sc,
1623                         sc->bulkout, sc->bulkout_pipe, TSTATE_BBB_RESET3,
1624                         sc->transfer_xfer[XFER_BBB_RESET3]);
1625
1626                 return;
1627         case TSTATE_BBB_RESET3:
1628                 if (err)        /* should not occur */
1629                         printf("%s: BBB bulk-out clear stall failed, %s\n",
1630                                USBDEVNAME(sc->sc_dev), usbd_errstr(err));
1631                         /* no error recovery, otherwise we end up in a loop */
1632
1633                 sc->transfer_state = TSTATE_IDLE;
1634                 if (sc->transfer_priv) {
1635                         sc->transfer_cb(sc, sc->transfer_priv,
1636                                         sc->transfer_datalen,
1637                                         sc->transfer_status);
1638                 }
1639
1640                 return;
1641
1642         /***** Default *****/
1643         default:
1644                 panic("%s: Unknown state %d",
1645                       USBDEVNAME(sc->sc_dev), sc->transfer_state);
1646         }
1647 }
1648
1649 Static int
1650 umass_bbb_get_max_lun(struct umass_softc *sc)
1651 {
1652         usbd_device_handle udev;
1653         usb_device_request_t req;
1654         usbd_status err;
1655         usb_interface_descriptor_t *id;
1656         int maxlun = 0;
1657         u_int8_t buf = 0;
1658
1659         usbd_interface2device_handle(sc->iface, &udev);
1660         id = usbd_get_interface_descriptor(sc->iface);
1661
1662         /* The Get Max Lun command is a class-specific request. */
1663         req.bmRequestType = UT_READ_CLASS_INTERFACE;
1664         req.bRequest = UR_BBB_GET_MAX_LUN;
1665         USETW(req.wValue, 0);
1666         USETW(req.wIndex, id->bInterfaceNumber);
1667         USETW(req.wLength, 1);
1668
1669         err = usbd_do_request(udev, &req, &buf);
1670         switch (err) {
1671         case USBD_NORMAL_COMPLETION:
1672                 maxlun = buf;
1673                 DPRINTF(UDMASS_BBB, ("%s: Max Lun is %d\n",
1674                     USBDEVNAME(sc->sc_dev), maxlun));
1675                 break;
1676         case USBD_STALLED:
1677         case USBD_SHORT_XFER:
1678         default:
1679                 /* Device doesn't support Get Max Lun request. */
1680                 printf("%s: Get Max Lun not supported (%s)\n",
1681                     USBDEVNAME(sc->sc_dev), usbd_errstr(err));
1682                 /* XXX Should we port_reset the device? */
1683                 break;
1684         }
1685
1686         return(maxlun);
1687 }
1688
1689 /*
1690  * Command/Bulk/Interrupt (CBI) specific functions
1691  */
1692
1693 Static int
1694 umass_cbi_adsc(struct umass_softc *sc, char *buffer, int buflen,
1695                usbd_xfer_handle xfer)
1696 {
1697         usbd_device_handle udev;
1698
1699         KASSERT(sc->proto & (UMASS_PROTO_CBI|UMASS_PROTO_CBI_I),
1700                 ("%s: umass_cbi_adsc: wrong sc->proto 0x%02x\n",
1701                         USBDEVNAME(sc->sc_dev), sc->proto));
1702
1703         usbd_interface2device_handle(sc->iface, &udev);
1704
1705         sc->request.bmRequestType = UT_WRITE_CLASS_INTERFACE;
1706         sc->request.bRequest = UR_CBI_ADSC;
1707         USETW(sc->request.wValue, 0);
1708         USETW(sc->request.wIndex, sc->ifaceno);
1709         USETW(sc->request.wLength, buflen);
1710         return umass_setup_ctrl_transfer(sc, udev, &sc->request, buffer,
1711                                          buflen, 0, xfer);
1712 }
1713
1714
1715 Static void
1716 umass_cbi_reset(struct umass_softc *sc, int status)
1717 {
1718         int i;
1719 #       define SEND_DIAGNOSTIC_CMDLEN   12
1720
1721         KASSERT(sc->proto & (UMASS_PROTO_CBI|UMASS_PROTO_CBI_I),
1722                 ("%s: umass_cbi_reset: wrong sc->proto 0x%02x\n",
1723                         USBDEVNAME(sc->sc_dev), sc->proto));
1724
1725         /*
1726          * Command Block Reset Protocol
1727          *
1728          * First send a reset request to the device. Then clear
1729          * any possibly stalled bulk endpoints.
1730
1731          * This is done in 3 steps, states:
1732          * TSTATE_CBI_RESET1
1733          * TSTATE_CBI_RESET2
1734          * TSTATE_CBI_RESET3
1735          *
1736          * If the reset doesn't succeed, the device should be port reset.
1737          */
1738
1739         DPRINTF(UDMASS_CBI, ("%s: CBI Reset\n",
1740                 USBDEVNAME(sc->sc_dev)));
1741
1742         KASSERT(sizeof(sc->cbl) >= SEND_DIAGNOSTIC_CMDLEN,
1743                 ("%s: CBL struct is too small (%ld < %d)\n",
1744                         USBDEVNAME(sc->sc_dev),
1745                         (long)sizeof(sc->cbl), SEND_DIAGNOSTIC_CMDLEN));
1746
1747         sc->transfer_state = TSTATE_CBI_RESET1;
1748         sc->transfer_status = status;
1749
1750         /* The 0x1d code is the SEND DIAGNOSTIC command. To distingiush between
1751          * the two the last 10 bytes of the cbl is filled with 0xff (section
1752          * 2.2 of the CBI spec).
1753          */
1754         sc->cbl[0] = 0x1d;      /* Command Block Reset */
1755         sc->cbl[1] = 0x04;
1756         for (i = 2; i < SEND_DIAGNOSTIC_CMDLEN; i++)
1757                 sc->cbl[i] = 0xff;
1758
1759         umass_cbi_adsc(sc, sc->cbl, SEND_DIAGNOSTIC_CMDLEN,
1760                        sc->transfer_xfer[XFER_CBI_RESET1]);
1761         /* XXX if the command fails we should reset the port on the bub */
1762 }
1763
1764 Static void
1765 umass_cbi_transfer(struct umass_softc *sc, int lun,
1766                 void *cmd, int cmdlen, void *data, int datalen, int dir,
1767                 transfer_cb_f cb, void *priv)
1768 {
1769         KASSERT(sc->proto & (UMASS_PROTO_CBI|UMASS_PROTO_CBI_I),
1770                 ("%s: umass_cbi_transfer: wrong sc->proto 0x%02x\n",
1771                         USBDEVNAME(sc->sc_dev), sc->proto));
1772
1773         /*
1774          * Do a CBI transfer with cmdlen bytes from cmd, possibly
1775          * a data phase of datalen bytes from/to the device and finally a
1776          * csw read phase.
1777          * If the data direction was inbound a maximum of datalen bytes
1778          * is stored in the buffer pointed to by data.
1779          *
1780          * umass_cbi_transfer initialises the transfer and lets the state
1781          * machine in umass_cbi_state handle the completion. It uses the
1782          * following states:
1783          * TSTATE_CBI_COMMAND
1784          *   -> XXX fill in
1785          *
1786          * An error in any of those states will invoke
1787          * umass_cbi_reset.
1788          */
1789
1790         /* check the given arguments */
1791         KASSERT(datalen == 0 || data != NULL,
1792                 ("%s: datalen > 0, but no buffer",USBDEVNAME(sc->sc_dev)));
1793         KASSERT(datalen == 0 || dir != DIR_NONE,
1794                 ("%s: direction is NONE while datalen is not zero\n",
1795                         USBDEVNAME(sc->sc_dev)));
1796
1797         /* store the details for the data transfer phase */
1798         sc->transfer_dir = dir;
1799         sc->transfer_data = data;
1800         sc->transfer_datalen = datalen;
1801         sc->transfer_actlen = 0;
1802         sc->transfer_cb = cb;
1803         sc->transfer_priv = priv;
1804         sc->transfer_status = STATUS_CMD_OK;
1805
1806         /* move from idle to the command state */
1807         sc->transfer_state = TSTATE_CBI_COMMAND;
1808
1809         DIF(UDMASS_CBI, umass_cbi_dump_cmd(sc, cmd, cmdlen));
1810
1811         /* Send the Command Block from host to device via control endpoint. */
1812         if (umass_cbi_adsc(sc, cmd, cmdlen, sc->transfer_xfer[XFER_CBI_CB]))
1813                 umass_cbi_reset(sc, STATUS_WIRE_FAILED);
1814 }
1815
1816 Static void
1817 umass_cbi_state(usbd_xfer_handle xfer, usbd_private_handle priv,
1818                 usbd_status err)
1819 {
1820         struct umass_softc *sc = (struct umass_softc *) priv;
1821
1822         KASSERT(sc->proto & (UMASS_PROTO_CBI|UMASS_PROTO_CBI_I),
1823                 ("%s: umass_cbi_state: wrong sc->proto 0x%02x\n",
1824                         USBDEVNAME(sc->sc_dev), sc->proto));
1825
1826         /*
1827          * State handling for CBI transfers.
1828          */
1829
1830         DPRINTF(UDMASS_CBI, ("%s: Handling CBI state %d (%s), xfer=%p, %s\n",
1831                 USBDEVNAME(sc->sc_dev), sc->transfer_state,
1832                 states[sc->transfer_state], xfer, usbd_errstr(err)));
1833
1834         switch (sc->transfer_state) {
1835
1836         /***** CBI Transfer *****/
1837         case TSTATE_CBI_COMMAND:
1838                 if (err == USBD_STALLED) {
1839                         DPRINTF(UDMASS_CBI, ("%s: Command Transport failed\n",
1840                                 USBDEVNAME(sc->sc_dev)));
1841                         /* Status transport by control pipe (section 2.3.2.1).
1842                          * The command contained in the command block failed.
1843                          *
1844                          * The control pipe has already been unstalled by the
1845                          * USB stack.
1846                          * Section 2.4.3.1.1 states that the bulk in endpoints
1847                          * should not be stalled at this point.
1848                          */
1849
1850                         sc->transfer_state = TSTATE_IDLE;
1851                         sc->transfer_cb(sc, sc->transfer_priv,
1852                                         sc->transfer_datalen,
1853                                         STATUS_CMD_FAILED);
1854
1855                         return;
1856                 } else if (err) {
1857                         DPRINTF(UDMASS_CBI, ("%s: failed to send ADSC\n",
1858                                 USBDEVNAME(sc->sc_dev)));
1859                         umass_cbi_reset(sc, STATUS_WIRE_FAILED);
1860
1861                         return;
1862                 }
1863
1864                 sc->transfer_state = TSTATE_CBI_DATA;
1865                 if (sc->transfer_dir == DIR_IN) {
1866                         if (umass_setup_transfer(sc, sc->bulkin_pipe,
1867                                         sc->transfer_data, sc->transfer_datalen,
1868                                         USBD_SHORT_XFER_OK,
1869                                         sc->transfer_xfer[XFER_CBI_DATA]))
1870                                 umass_cbi_reset(sc, STATUS_WIRE_FAILED);
1871
1872                 } else if (sc->transfer_dir == DIR_OUT) {
1873                         if (umass_setup_transfer(sc, sc->bulkout_pipe,
1874                                         sc->transfer_data, sc->transfer_datalen,
1875                                         0,      /* fixed length transfer */
1876                                         sc->transfer_xfer[XFER_CBI_DATA]))
1877                                 umass_cbi_reset(sc, STATUS_WIRE_FAILED);
1878
1879                 } else if (sc->proto & UMASS_PROTO_CBI_I) {
1880                         DPRINTF(UDMASS_CBI, ("%s: no data phase\n",
1881                                 USBDEVNAME(sc->sc_dev)));
1882                         sc->transfer_state = TSTATE_CBI_STATUS;
1883                         if (umass_setup_transfer(sc, sc->intrin_pipe,
1884                                         &sc->sbl, sizeof(sc->sbl),
1885                                         0,      /* fixed length transfer */
1886                                         sc->transfer_xfer[XFER_CBI_STATUS])){
1887                                 umass_cbi_reset(sc, STATUS_WIRE_FAILED);
1888                         }
1889                 } else {
1890                         DPRINTF(UDMASS_CBI, ("%s: no data phase\n",
1891                                 USBDEVNAME(sc->sc_dev)));
1892                         /* No command completion interrupt. Request
1893                          * sense data.
1894                          */
1895                         sc->transfer_state = TSTATE_IDLE;
1896                         sc->transfer_cb(sc, sc->transfer_priv,
1897                                0, STATUS_CMD_UNKNOWN);
1898                 }
1899
1900                 return;
1901
1902         case TSTATE_CBI_DATA:
1903                 /* retrieve the length of the transfer that was done */
1904                 usbd_get_xfer_status(xfer,NULL,NULL,&sc->transfer_actlen,NULL);
1905
1906                 if (err) {
1907                         DPRINTF(UDMASS_CBI, ("%s: Data-%s %db failed, "
1908                                 "%s\n", USBDEVNAME(sc->sc_dev),
1909                                 (sc->transfer_dir == DIR_IN?"in":"out"),
1910                                 sc->transfer_datalen,usbd_errstr(err)));
1911
1912                         if (err == USBD_STALLED) {
1913                                 umass_clear_endpoint_stall(sc,
1914                                         sc->bulkin, sc->bulkin_pipe,
1915                                         TSTATE_CBI_DCLEAR,
1916                                         sc->transfer_xfer[XFER_CBI_DCLEAR]);
1917                         } else {
1918                                 umass_cbi_reset(sc, STATUS_WIRE_FAILED);
1919                         }
1920                         return;
1921                 }
1922
1923                 DIF(UDMASS_CBI, if (sc->transfer_dir == DIR_IN)
1924                                         umass_dump_buffer(sc, sc->transfer_data,
1925                                                 sc->transfer_actlen, 48));
1926
1927                 if (sc->proto & UMASS_PROTO_CBI_I) {
1928                         sc->transfer_state = TSTATE_CBI_STATUS;
1929                         if (umass_setup_transfer(sc, sc->intrin_pipe,
1930                                     &sc->sbl, sizeof(sc->sbl),
1931                                     0,  /* fixed length transfer */
1932                                     sc->transfer_xfer[XFER_CBI_STATUS])){
1933                                 umass_cbi_reset(sc, STATUS_WIRE_FAILED);
1934                         }
1935                 } else {
1936                         /* No command completion interrupt. Request
1937                          * sense to get status of command.
1938                          */
1939                         sc->transfer_state = TSTATE_IDLE;
1940                         sc->transfer_cb(sc, sc->transfer_priv,
1941                                 sc->transfer_datalen - sc->transfer_actlen,
1942                                 STATUS_CMD_UNKNOWN);
1943                 }
1944                 return;
1945
1946         case TSTATE_CBI_STATUS:
1947                 if (err) {
1948                         DPRINTF(UDMASS_CBI, ("%s: Status Transport failed\n",
1949                                 USBDEVNAME(sc->sc_dev)));
1950                         /* Status transport by interrupt pipe (section 2.3.2.2).
1951                          */
1952
1953                         if (err == USBD_STALLED) {
1954                                 umass_clear_endpoint_stall(sc,
1955                                         sc->intrin, sc->intrin_pipe,
1956                                         TSTATE_CBI_SCLEAR,
1957                                         sc->transfer_xfer[XFER_CBI_SCLEAR]);
1958                         } else {
1959                                 umass_cbi_reset(sc, STATUS_WIRE_FAILED);
1960                         }
1961                         return;
1962                 }
1963
1964                 /* Dissect the information in the buffer */
1965
1966                 if (sc->proto & UMASS_PROTO_UFI) {
1967                         int status;
1968
1969                         /* Section 3.4.3.1.3 specifies that the UFI command
1970                          * protocol returns an ASC and ASCQ in the interrupt
1971                          * data block.
1972                          */
1973
1974                         DPRINTF(UDMASS_CBI, ("%s: UFI CCI, ASC = 0x%02x, "
1975                                 "ASCQ = 0x%02x\n",
1976                                 USBDEVNAME(sc->sc_dev),
1977                                 sc->sbl.ufi.asc, sc->sbl.ufi.ascq));
1978
1979                         if (sc->sbl.ufi.asc == 0 && sc->sbl.ufi.ascq == 0)
1980                                 status = STATUS_CMD_OK;
1981                         else
1982                                 status = STATUS_CMD_FAILED;
1983
1984                         sc->transfer_state = TSTATE_IDLE;
1985                         sc->transfer_cb(sc, sc->transfer_priv,
1986                                 sc->transfer_datalen - sc->transfer_actlen,
1987                                 status);
1988                 } else {
1989                         /* Command Interrupt Data Block */
1990                         DPRINTF(UDMASS_CBI, ("%s: type=0x%02x, value=0x%02x\n",
1991                                 USBDEVNAME(sc->sc_dev),
1992                                 sc->sbl.common.type, sc->sbl.common.value));
1993
1994                         if (sc->sbl.common.type == IDB_TYPE_CCI) {
1995                                 int err;
1996
1997                                 if ((sc->sbl.common.value&IDB_VALUE_STATUS_MASK)
1998                                                         == IDB_VALUE_PASS) {
1999                                         err = STATUS_CMD_OK;
2000                                 } else if ((sc->sbl.common.value & IDB_VALUE_STATUS_MASK)
2001                                                         == IDB_VALUE_FAIL ||
2002                                            (sc->sbl.common.value & IDB_VALUE_STATUS_MASK)
2003                                                 == IDB_VALUE_PERSISTENT) {
2004                                         err = STATUS_CMD_FAILED;
2005                                 } else {
2006                                         err = STATUS_WIRE_FAILED;
2007                                 }
2008
2009                                 sc->transfer_state = TSTATE_IDLE;
2010                                 sc->transfer_cb(sc, sc->transfer_priv,
2011                                        sc->transfer_datalen-sc->transfer_actlen,
2012                                        err);
2013                         }
2014                 }
2015                 return;
2016
2017         case TSTATE_CBI_DCLEAR:
2018                 if (err) {      /* should not occur */
2019                         printf("%s: CBI bulk-in/out stall clear failed, %s\n",
2020                                USBDEVNAME(sc->sc_dev), usbd_errstr(err));
2021                         umass_cbi_reset(sc, STATUS_WIRE_FAILED);
2022                 }
2023
2024                 sc->transfer_state = TSTATE_IDLE;
2025                 sc->transfer_cb(sc, sc->transfer_priv,
2026                                 sc->transfer_datalen,
2027                                 STATUS_CMD_FAILED);
2028                 return;
2029
2030         case TSTATE_CBI_SCLEAR:
2031                 if (err)        /* should not occur */
2032                         printf("%s: CBI intr-in stall clear failed, %s\n",
2033                                USBDEVNAME(sc->sc_dev), usbd_errstr(err));
2034
2035                 /* Something really bad is going on. Reset the device */
2036                 umass_cbi_reset(sc, STATUS_CMD_FAILED);
2037                 return;
2038
2039         /***** CBI Reset *****/
2040         case TSTATE_CBI_RESET1:
2041                 if (err)
2042                         printf("%s: CBI reset failed, %s\n",
2043                                 USBDEVNAME(sc->sc_dev), usbd_errstr(err));
2044
2045                 umass_clear_endpoint_stall(sc,
2046                         sc->bulkin, sc->bulkin_pipe, TSTATE_CBI_RESET2,
2047                         sc->transfer_xfer[XFER_CBI_RESET2]);
2048
2049                 return;
2050         case TSTATE_CBI_RESET2:
2051                 if (err)        /* should not occur */
2052                         printf("%s: CBI bulk-in stall clear failed, %s\n",
2053                                USBDEVNAME(sc->sc_dev), usbd_errstr(err));
2054                         /* no error recovery, otherwise we end up in a loop */
2055
2056                 umass_clear_endpoint_stall(sc,
2057                         sc->bulkout, sc->bulkout_pipe, TSTATE_CBI_RESET3,
2058                         sc->transfer_xfer[XFER_CBI_RESET3]);
2059
2060                 return;
2061         case TSTATE_CBI_RESET3:
2062                 if (err)        /* should not occur */
2063                         printf("%s: CBI bulk-out stall clear failed, %s\n",
2064                                USBDEVNAME(sc->sc_dev), usbd_errstr(err));
2065                         /* no error recovery, otherwise we end up in a loop */
2066
2067                 sc->transfer_state = TSTATE_IDLE;
2068                 if (sc->transfer_priv) {
2069                         sc->transfer_cb(sc, sc->transfer_priv,
2070                                         sc->transfer_datalen,
2071                                         sc->transfer_status);
2072                 }
2073
2074                 return;
2075
2076
2077         /***** Default *****/
2078         default:
2079                 panic("%s: Unknown state %d",
2080                       USBDEVNAME(sc->sc_dev), sc->transfer_state);
2081         }
2082 }
2083
2084
2085
2086
2087 /*
2088  * CAM specific functions (used by SCSI, UFI, 8070i (ATAPI))
2089  */
2090
2091 Static int
2092 umass_cam_attach_sim(struct umass_softc *sc)
2093 {
2094         struct cam_devq *devq;          /* Per device Queue */
2095
2096         /* A HBA is attached to the CAM layer.
2097          *
2098          * The CAM layer will then after a while start probing for
2099          * devices on the bus. The number of SIMs is limited to one.
2100          */
2101
2102         devq = cam_simq_alloc(1 /*maximum openings*/);
2103         if (devq == NULL)
2104                 return(ENOMEM);
2105
2106         sc->umass_sim = cam_sim_alloc(umass_cam_action, umass_cam_poll,
2107                                 DEVNAME_SIM,
2108                                 sc /*priv*/,
2109                                 USBDEVUNIT(sc->sc_dev) /*unit number*/,
2110                                 1 /*maximum device openings*/,
2111                                 0 /*maximum tagged device openings*/,
2112                                 devq);
2113         cam_simq_release(devq);
2114         if (sc->umass_sim == NULL)
2115                 return(ENOMEM);
2116
2117         /*
2118          * If we could not register the bus we must immediately free the
2119          * sim so we do not attempt to deregister a bus later on that we
2120          * had not registered.
2121          */
2122         if (xpt_bus_register(sc->umass_sim, USBDEVUNIT(sc->sc_dev)) !=
2123             CAM_SUCCESS) {
2124                 cam_sim_free(sc->umass_sim);
2125                 sc->umass_sim = NULL;
2126                 return(ENOMEM);
2127         }
2128
2129         return(0);
2130 }
2131
2132 Static void
2133 umass_cam_rescan_callback(struct cam_periph *periph, union ccb *ccb)
2134 {
2135 #ifdef USB_DEBUG
2136         if (ccb->ccb_h.status != CAM_REQ_CMP) {
2137                 DPRINTF(UDMASS_SCSI, ("%s:%d Rescan failed, 0x%04x\n",
2138                         periph->periph_name, periph->unit_number,
2139                         ccb->ccb_h.status));
2140         } else {
2141                 DPRINTF(UDMASS_SCSI, ("%s%d: Rescan succeeded\n",
2142                         periph->periph_name, periph->unit_number));
2143         }
2144 #endif
2145
2146         xpt_free_path(ccb->ccb_h.path);
2147         free(ccb, M_USBDEV);
2148 }
2149
2150 Static void
2151 umass_cam_rescan(void *addr)
2152 {
2153         struct umass_softc *sc = (struct umass_softc *) addr;
2154         struct cam_path *path;
2155         union ccb *ccb;
2156
2157         sc->rescan_timeout.callout = NULL;
2158         ccb = malloc(sizeof(union ccb), M_USBDEV, M_WAITOK|M_ZERO);
2159
2160         DPRINTF(UDMASS_SCSI, ("scbus%d: scanning for %s:%d:%d:%d\n",
2161                 cam_sim_path(sc->umass_sim),
2162                 USBDEVNAME(sc->sc_dev), cam_sim_path(sc->umass_sim),
2163                 USBDEVUNIT(sc->sc_dev), CAM_LUN_WILDCARD));
2164
2165         if (xpt_create_path(&path, xpt_periph, cam_sim_path(sc->umass_sim),
2166                             CAM_TARGET_WILDCARD, CAM_LUN_WILDCARD)
2167             != CAM_REQ_CMP)
2168                 return;
2169
2170         xpt_setup_ccb(&ccb->ccb_h, path, 5/*priority (low)*/);
2171         ccb->ccb_h.func_code = XPT_SCAN_BUS;
2172         ccb->ccb_h.cbfcnp = umass_cam_rescan_callback;
2173         ccb->crcn.flags = CAM_FLAG_NONE;
2174         xpt_action(ccb);
2175
2176         /* The scan is in progress now. */
2177 }
2178
2179 Static int
2180 umass_cam_attach(struct umass_softc *sc)
2181 {
2182 #ifndef USB_DEBUG
2183         if (bootverbose)
2184 #endif
2185                 printf("%s:%d:%d:%d: Attached to scbus%d\n",
2186                         USBDEVNAME(sc->sc_dev), cam_sim_path(sc->umass_sim),
2187                         USBDEVUNIT(sc->sc_dev), CAM_LUN_WILDCARD,
2188                         cam_sim_path(sc->umass_sim));
2189
2190         if (!cold) {
2191                 /*
2192                  * Notify CAM of the new device after 1 second delay. Any
2193                  * failure is benign, as the user can still do it by hand
2194                  * (camcontrol rescan <busno>). Only do this if we are not
2195                  * booting, because CAM does a scan after booting has
2196                  * completed, when interrupts have been enabled.
2197                  */
2198                 sc->rescan_timeout =
2199                         timeout(umass_cam_rescan, sc, MS_TO_TICKS(200));
2200         }
2201
2202         return(0);      /* always succesfull */
2203 }
2204
2205 /* umass_cam_detach
2206  *      detach from the CAM layer
2207  */
2208
2209 Static int
2210 umass_cam_detach_sim(struct umass_softc *sc)
2211 {
2212         if (sc->rescan_timeout.callout) {
2213                 untimeout(umass_cam_rescan, sc, sc->rescan_timeout);
2214                 sc->rescan_timeout.callout = NULL;
2215         }
2216         if (sc->umass_sim) {
2217                 if (xpt_bus_deregister(cam_sim_path(sc->umass_sim)))
2218                         cam_sim_free(sc->umass_sim);
2219                 else
2220                         return(EBUSY);
2221
2222                 sc->umass_sim = NULL;
2223         }
2224
2225         return(0);
2226 }
2227
2228 /* umass_cam_action
2229  *      CAM requests for action come through here
2230  */
2231
2232 Static void
2233 umass_cam_action(struct cam_sim *sim, union ccb *ccb)
2234 {
2235         struct umass_softc *sc = (struct umass_softc *)sim->softc;
2236
2237         /* The softc is still there, but marked as going away. umass_cam_detach
2238          * has not yet notified CAM of the lost device however.
2239          */
2240         if (sc && (sc->flags & UMASS_FLAGS_GONE)) {
2241                 DPRINTF(UDMASS_SCSI, ("%s:%d:%d:%d:func_code 0x%04x: "
2242                         "Invalid target (gone)\n",
2243                         USBDEVNAME(sc->sc_dev), cam_sim_path(sc->umass_sim),
2244                         ccb->ccb_h.target_id, ccb->ccb_h.target_lun,
2245                         ccb->ccb_h.func_code));
2246                 ccb->ccb_h.status = CAM_TID_INVALID;
2247                 xpt_done(ccb);
2248                 return;
2249         }
2250
2251         /* Verify, depending on the operation to perform, that we either got a
2252          * valid sc, because an existing target was referenced, or otherwise
2253          * the SIM is addressed.
2254          *
2255          * This avoids bombing out at a printf and does give the CAM layer some
2256          * sensible feedback on errors.
2257          */
2258         switch (ccb->ccb_h.func_code) {
2259         case XPT_SCSI_IO:
2260         case XPT_RESET_DEV:
2261         case XPT_GET_TRAN_SETTINGS:
2262         case XPT_SET_TRAN_SETTINGS:
2263         case XPT_CALC_GEOMETRY:
2264                 /* the opcodes requiring a target. These should never occur. */
2265                 if (sc == NULL) {
2266                         printf("%s:%d:%d:%d:func_code 0x%04x: "
2267                                 "Invalid target (target needed)\n",
2268                                 DEVNAME_SIM, cam_sim_path(sc->umass_sim),
2269                                 ccb->ccb_h.target_id, ccb->ccb_h.target_lun,
2270                                 ccb->ccb_h.func_code);
2271
2272                         ccb->ccb_h.status = CAM_TID_INVALID;
2273                         xpt_done(ccb);
2274                         return;
2275                 }
2276                 break;
2277         case XPT_PATH_INQ:
2278         case XPT_NOOP:
2279                 /* The opcodes sometimes aimed at a target (sc is valid),
2280                  * sometimes aimed at the SIM (sc is invalid and target is
2281                  * CAM_TARGET_WILDCARD)
2282                  */
2283                 if (sc == NULL && ccb->ccb_h.target_id != CAM_TARGET_WILDCARD) {
2284                         DPRINTF(UDMASS_SCSI, ("%s:%d:%d:%d:func_code 0x%04x: "
2285                                 "Invalid target (no wildcard)\n",
2286                                 DEVNAME_SIM, cam_sim_path(sc->umass_sim),
2287                                 ccb->ccb_h.target_id, ccb->ccb_h.target_lun,
2288                                 ccb->ccb_h.func_code));
2289
2290                         ccb->ccb_h.status = CAM_TID_INVALID;
2291                         xpt_done(ccb);
2292                         return;
2293                 }
2294                 break;
2295         default:
2296                 /* XXX Hm, we should check the input parameters */
2297                 break;
2298         }
2299
2300         /* Perform the requested action */
2301         switch (ccb->ccb_h.func_code) {
2302         case XPT_SCSI_IO:
2303         {
2304                 struct ccb_scsiio *csio = &ccb->csio;   /* deref union */
2305                 int dir;
2306                 unsigned char *cmd;
2307                 int cmdlen;
2308                 unsigned char *rcmd;
2309                 int rcmdlen;
2310
2311                 DPRINTF(UDMASS_SCSI, ("%s:%d:%d:%d:XPT_SCSI_IO: "
2312                         "cmd: 0x%02x, flags: 0x%02x, "
2313                         "%db cmd/%db data/%db sense\n",
2314                         USBDEVNAME(sc->sc_dev), cam_sim_path(sc->umass_sim),
2315                         ccb->ccb_h.target_id, ccb->ccb_h.target_lun,
2316                         csio->cdb_io.cdb_bytes[0],
2317                         ccb->ccb_h.flags & CAM_DIR_MASK,
2318                         csio->cdb_len, csio->dxfer_len,
2319                         csio->sense_len));
2320
2321                 /* clear the end of the buffer to make sure we don't send out
2322                  * garbage.
2323                  */
2324                 DIF(UDMASS_SCSI, if ((ccb->ccb_h.flags & CAM_DIR_MASK)
2325                                      == CAM_DIR_OUT)
2326                                         umass_dump_buffer(sc, csio->data_ptr,
2327                                                 csio->dxfer_len, 48));
2328
2329                 if (sc->transfer_state != TSTATE_IDLE) {
2330                         DPRINTF(UDMASS_SCSI, ("%s:%d:%d:%d:XPT_SCSI_IO: "
2331                                 "I/O in progress, deferring (state %d, %s)\n",
2332                                 USBDEVNAME(sc->sc_dev), cam_sim_path(sc->umass_sim),
2333                                 ccb->ccb_h.target_id, ccb->ccb_h.target_lun,
2334                                 sc->transfer_state,states[sc->transfer_state]));
2335                         ccb->ccb_h.status = CAM_SCSI_BUSY;
2336                         xpt_done(ccb);
2337                         return;
2338                 }
2339
2340                 switch(ccb->ccb_h.flags&CAM_DIR_MASK) {
2341                 case CAM_DIR_IN:
2342                         dir = DIR_IN;
2343                         break;
2344                 case CAM_DIR_OUT:
2345                         dir = DIR_OUT;
2346                         break;
2347                 default:
2348                         dir = DIR_NONE;
2349                 }
2350
2351                 ccb->ccb_h.status = CAM_REQ_INPROG | CAM_SIM_QUEUED;
2352
2353
2354                 if (csio->ccb_h.flags & CAM_CDB_POINTER) {
2355                         cmd = (unsigned char *) csio->cdb_io.cdb_ptr;
2356                 } else {
2357                         cmd = (unsigned char *) &csio->cdb_io.cdb_bytes;
2358                 }
2359                 cmdlen = csio->cdb_len;
2360                 rcmd = (unsigned char *) &sc->cam_scsi_command;
2361                 rcmdlen = sizeof(sc->cam_scsi_command);
2362
2363                 /* sc->transform will convert the command to the command
2364                  * (format) needed by the specific command set and return
2365                  * the converted command in a buffer pointed to be rcmd.
2366                  * We pass in a buffer, but if the command does not
2367                  * have to be transformed it returns a ptr to the original
2368                  * buffer (see umass_scsi_transform).
2369                  */
2370
2371                 if (sc->transform(sc, cmd, cmdlen, &rcmd, &rcmdlen)) {
2372                         /*
2373                          * Handle EVPD inquiry for broken devices first
2374                          * NO_INQUIRY also implies NO_INQUIRY_EVPD
2375                          */
2376                         if ((sc->quirks & (NO_INQUIRY_EVPD | NO_INQUIRY)) &&
2377                             rcmd[0] == INQUIRY && (rcmd[1] & SI_EVPD)) {
2378                                 struct scsi_sense_data *sense;
2379
2380                                 sense = &ccb->csio.sense_data;
2381                                 bzero(sense, sizeof(*sense));
2382                                 sense->error_code = SSD_CURRENT_ERROR;
2383                                 sense->flags = SSD_KEY_ILLEGAL_REQUEST;
2384                                 sense->add_sense_code = 0x24;
2385                                 sense->extra_len = 10;
2386                                 ccb->csio.scsi_status = SCSI_STATUS_CHECK_COND;
2387                                 ccb->ccb_h.status = CAM_SCSI_STATUS_ERROR |
2388                                     CAM_AUTOSNS_VALID;
2389                                 xpt_done(ccb);
2390                                 return;
2391                         }
2392                         /* Return fake inquiry data for broken devices */
2393                         if ((sc->quirks & NO_INQUIRY) && rcmd[0] == INQUIRY) {
2394                                 struct ccb_scsiio *csio = &ccb->csio;
2395
2396                                 memcpy(csio->data_ptr, &fake_inq_data,
2397                                     sizeof(fake_inq_data));
2398                                 csio->scsi_status = SCSI_STATUS_OK;
2399                                 ccb->ccb_h.status = CAM_REQ_CMP;
2400                                 xpt_done(ccb);
2401                                 return;
2402                         }
2403                         if ((sc->quirks & FORCE_SHORT_INQUIRY) &&
2404                             rcmd[0] == INQUIRY) {
2405                                 csio->dxfer_len = SHORT_INQUIRY_LENGTH;
2406                         }
2407                         sc->transfer(sc, ccb->ccb_h.target_lun, rcmd, rcmdlen,
2408                                      csio->data_ptr,
2409                                      csio->dxfer_len, dir,
2410                                      umass_cam_cb, (void *) ccb);
2411                 } else {
2412                         ccb->ccb_h.status = CAM_REQ_INVALID;
2413                         xpt_done(ccb);
2414                 }
2415
2416                 break;
2417         }
2418         case XPT_PATH_INQ:
2419         {
2420                 struct ccb_pathinq *cpi = &ccb->cpi;
2421
2422                 DPRINTF(UDMASS_SCSI, ("%s:%d:%d:%d:XPT_PATH_INQ:.\n",
2423                         (sc == NULL? DEVNAME_SIM:USBDEVNAME(sc->sc_dev)),
2424                         cam_sim_path(sc->umass_sim),
2425                         ccb->ccb_h.target_id, ccb->ccb_h.target_lun));
2426
2427                 /* host specific information */
2428                 cpi->version_num = 1;
2429                 cpi->hba_inquiry = 0;
2430                 cpi->target_sprt = 0;
2431                 cpi->hba_misc = PIM_NO_6_BYTE;
2432                 cpi->hba_eng_cnt = 0;
2433                 cpi->max_target = UMASS_SCSIID_MAX;     /* one target */
2434                 cpi->initiator_id = UMASS_SCSIID_HOST;
2435                 strncpy(cpi->sim_vid, "FreeBSD", SIM_IDLEN);
2436                 strncpy(cpi->hba_vid, "USB SCSI", HBA_IDLEN);
2437                 strncpy(cpi->dev_name, cam_sim_name(sim), DEV_IDLEN);
2438                 cpi->unit_number = cam_sim_unit(sim);
2439                 cpi->bus_id = USBDEVUNIT(sc->sc_dev);
2440
2441                 if (sc == NULL) {
2442                         cpi->base_transfer_speed = 0;
2443                         cpi->max_lun = 0;
2444                 } else {
2445                         if (sc->quirks & FLOPPY_SPEED) {
2446                             cpi->base_transfer_speed = UMASS_FLOPPY_TRANSFER_SPEED;
2447                         } else {
2448                             cpi->base_transfer_speed = UMASS_DEFAULT_TRANSFER_SPEED;
2449                         }
2450                         cpi->max_lun = sc->maxlun;
2451                 }
2452
2453                 cpi->ccb_h.status = CAM_REQ_CMP;
2454                 xpt_done(ccb);
2455                 break;
2456         }
2457         case XPT_RESET_DEV:
2458         {
2459                 DPRINTF(UDMASS_SCSI, ("%s:%d:%d:%d:XPT_RESET_DEV:.\n",
2460                         USBDEVNAME(sc->sc_dev), cam_sim_path(sc->umass_sim),
2461                         ccb->ccb_h.target_id, ccb->ccb_h.target_lun));
2462
2463                 ccb->ccb_h.status = CAM_REQ_INPROG;
2464                 umass_reset(sc, umass_cam_cb, (void *) ccb);
2465                 break;
2466         }
2467         case XPT_GET_TRAN_SETTINGS:
2468         {
2469                 struct ccb_trans_settings *cts = &ccb->cts;
2470
2471                 DPRINTF(UDMASS_SCSI, ("%s:%d:%d:%d:XPT_GET_TRAN_SETTINGS:.\n",
2472                         USBDEVNAME(sc->sc_dev), cam_sim_path(sc->umass_sim),
2473                         ccb->ccb_h.target_id, ccb->ccb_h.target_lun));
2474
2475                 cts->valid = 0;
2476                 cts->flags = 0;         /* no disconnection, tagging */
2477
2478                 ccb->ccb_h.status = CAM_REQ_CMP;
2479                 xpt_done(ccb);
2480                 break;
2481         }
2482         case XPT_SET_TRAN_SETTINGS:
2483         {
2484                 DPRINTF(UDMASS_SCSI, ("%s:%d:%d:%d:XPT_SET_TRAN_SETTINGS:.\n",
2485                         USBDEVNAME(sc->sc_dev), cam_sim_path(sc->umass_sim),
2486                         ccb->ccb_h.target_id, ccb->ccb_h.target_lun));
2487
2488                 ccb->ccb_h.status = CAM_FUNC_NOTAVAIL;
2489                 xpt_done(ccb);
2490                 break;
2491         }
2492         case XPT_CALC_GEOMETRY:
2493         {
2494                 cam_calc_geometry(&ccb->ccg, /*extended*/1);
2495                 xpt_done(ccb);
2496                 break;
2497         }
2498         case XPT_NOOP:
2499         {
2500                 DPRINTF(UDMASS_SCSI, ("%s:%d:%d:%d:XPT_NOOP:.\n",
2501                         (sc == NULL? DEVNAME_SIM:USBDEVNAME(sc->sc_dev)),
2502                         cam_sim_path(sc->umass_sim),
2503                         ccb->ccb_h.target_id, ccb->ccb_h.target_lun));
2504
2505                 ccb->ccb_h.status = CAM_REQ_CMP;
2506                 xpt_done(ccb);
2507                 break;
2508         }
2509         default:
2510                 DPRINTF(UDMASS_SCSI, ("%s:%d:%d:%d:func_code 0x%04x: "
2511                         "Not implemented\n",
2512                         (sc == NULL? DEVNAME_SIM:USBDEVNAME(sc->sc_dev)),
2513                         cam_sim_path(sc->umass_sim),
2514                         ccb->ccb_h.target_id, ccb->ccb_h.target_lun,
2515                         ccb->ccb_h.func_code));
2516
2517                 ccb->ccb_h.status = CAM_FUNC_NOTAVAIL;
2518                 xpt_done(ccb);
2519                 break;
2520         }
2521 }
2522
2523 /* umass_cam_poll
2524  *      all requests are handled through umass_cam_action, requests
2525  *      are never pending. So, nothing to do here.
2526  */
2527 Static void
2528 umass_cam_poll(struct cam_sim *sim)
2529 {
2530 #ifdef USB_DEBUG
2531         struct umass_softc *sc = (struct umass_softc *) sim->softc;
2532
2533         DPRINTF(UDMASS_SCSI, ("%s: CAM poll\n",
2534                 USBDEVNAME(sc->sc_dev)));
2535 #endif
2536
2537         /* nop */
2538 }
2539
2540
2541 /* umass_cam_cb
2542  *      finalise a completed CAM command
2543  */
2544
2545 Static void
2546 umass_cam_cb(struct umass_softc *sc, void *priv, int residue, int status)
2547 {
2548         union ccb *ccb = (union ccb *) priv;
2549         struct ccb_scsiio *csio = &ccb->csio;           /* deref union */
2550
2551         csio->resid = residue;
2552
2553         switch (status) {
2554         case STATUS_CMD_OK:
2555                 ccb->ccb_h.status = CAM_REQ_CMP;
2556                 xpt_done(ccb);
2557                 break;
2558
2559         case STATUS_CMD_UNKNOWN:
2560         case STATUS_CMD_FAILED:
2561                 switch (ccb->ccb_h.func_code) {
2562                 case XPT_SCSI_IO:
2563                 {
2564                         unsigned char *rcmd;
2565                         int rcmdlen;
2566
2567                         /* fetch sense data */
2568                         /* the rest of the command was filled in at attach */
2569                         sc->cam_scsi_sense.length = csio->sense_len;
2570
2571                         DPRINTF(UDMASS_SCSI,("%s: Fetching %db sense data\n",
2572                                 USBDEVNAME(sc->sc_dev), csio->sense_len));
2573
2574                         rcmd = (unsigned char *) &sc->cam_scsi_command;
2575                         rcmdlen = sizeof(sc->cam_scsi_command);
2576
2577                         if (sc->transform(sc,
2578                                     (unsigned char *) &sc->cam_scsi_sense,
2579                                     sizeof(sc->cam_scsi_sense),
2580                                     &rcmd, &rcmdlen)) {
2581                                 if ((sc->quirks & FORCE_SHORT_INQUIRY) && (rcmd[0] == INQUIRY)) {
2582                                         csio->sense_len = SHORT_INQUIRY_LENGTH;
2583                                 }
2584                                 sc->transfer(sc, ccb->ccb_h.target_lun,
2585                                              rcmd, rcmdlen,
2586                                              &csio->sense_data,
2587                                              csio->sense_len, DIR_IN,
2588                                              umass_cam_sense_cb, (void *) ccb);
2589                         } else {
2590                                 panic("transform(REQUEST_SENSE) failed");
2591                         }
2592                         break;
2593                 }
2594                 case XPT_RESET_DEV: /* Reset failed */
2595                         ccb->ccb_h.status = CAM_REQ_CMP_ERR;
2596                         xpt_done(ccb);
2597                         break;
2598                 default:
2599                         panic("umass_cam_cb called for func_code %d",
2600                               ccb->ccb_h.func_code);
2601                 }
2602                 break;
2603
2604         case STATUS_WIRE_FAILED:
2605                 /* the wire protocol failed and will have recovered
2606                  * (hopefully).  We return an error to CAM and let CAM retry
2607                  * the command if necessary.
2608                  */
2609                 ccb->ccb_h.status = CAM_REQ_CMP_ERR;
2610                 xpt_done(ccb);
2611                 break;
2612         default:
2613                 panic("%s: Unknown status %d in umass_cam_cb",
2614                         USBDEVNAME(sc->sc_dev), status);
2615         }
2616 }
2617
2618 /* Finalise a completed autosense operation
2619  */
2620 Static void
2621 umass_cam_sense_cb(struct umass_softc *sc, void *priv, int residue, int status)
2622 {
2623         union ccb *ccb = (union ccb *) priv;
2624         struct ccb_scsiio *csio = &ccb->csio;           /* deref union */
2625         unsigned char *rcmd;
2626         int rcmdlen;
2627
2628         switch (status) {
2629         case STATUS_CMD_OK:
2630         case STATUS_CMD_UNKNOWN:
2631         case STATUS_CMD_FAILED:
2632                 /* Getting sense data always succeeds (apart from wire
2633                  * failures).
2634                  */
2635                 if ((sc->quirks & RS_NO_CLEAR_UA)
2636                     && csio->cdb_io.cdb_bytes[0] == INQUIRY
2637                     && (csio->sense_data.flags & SSD_KEY)
2638                                                 == SSD_KEY_UNIT_ATTENTION) {
2639                         /* Ignore unit attention errors in the case where
2640                          * the Unit Attention state is not cleared on
2641                          * REQUEST SENSE. They will appear again at the next
2642                          * command.
2643                          */
2644                         ccb->ccb_h.status = CAM_REQ_CMP;
2645                 } else if ((csio->sense_data.flags & SSD_KEY)
2646                                                 == SSD_KEY_NO_SENSE) {
2647                         /* No problem after all (in the case of CBI without
2648                          * CCI)
2649                          */
2650                         ccb->ccb_h.status = CAM_REQ_CMP;
2651                 } else if ((sc->quirks & RS_NO_CLEAR_UA) &&
2652                            (csio->cdb_io.cdb_bytes[0] == READ_CAPACITY) &&
2653                            ((csio->sense_data.flags & SSD_KEY)
2654                             == SSD_KEY_UNIT_ATTENTION)) {
2655                         /*
2656                          * Some devices do not clear the unit attention error
2657                          * on request sense. We insert a test unit ready
2658                          * command to make sure we clear the unit attention
2659                          * condition, then allow the retry to proceed as
2660                          * usual.
2661                          */
2662
2663                         ccb->ccb_h.status = CAM_SCSI_STATUS_ERROR
2664                                             | CAM_AUTOSNS_VALID;
2665                         csio->scsi_status = SCSI_STATUS_CHECK_COND;
2666
2667 #if 0
2668                         DELAY(300000);
2669 #endif
2670
2671                         DPRINTF(UDMASS_SCSI,("%s: Doing a sneaky"
2672                                              "TEST_UNIT_READY\n",
2673                                 USBDEVNAME(sc->sc_dev)));
2674
2675                         /* the rest of the command was filled in at attach */
2676
2677                         rcmd = (unsigned char *) &sc->cam_scsi_command2;
2678                         rcmdlen = sizeof(sc->cam_scsi_command2);
2679
2680                         if (sc->transform(sc,
2681                                         (unsigned char *)
2682                                         &sc->cam_scsi_test_unit_ready,
2683                                         sizeof(sc->cam_scsi_test_unit_ready),
2684                                         &rcmd, &rcmdlen)) {
2685                                 sc->transfer(sc, ccb->ccb_h.target_lun,
2686                                              rcmd, rcmdlen,
2687                                              NULL, 0, DIR_NONE,
2688                                              umass_cam_quirk_cb, (void *) ccb);
2689                         } else {
2690                                 panic("transform(TEST_UNIT_READY) failed");
2691                         }
2692                         break;
2693                 } else {
2694                         ccb->ccb_h.status = CAM_SCSI_STATUS_ERROR
2695                                             | CAM_AUTOSNS_VALID;
2696                         csio->scsi_status = SCSI_STATUS_CHECK_COND;
2697                 }
2698                 xpt_done(ccb);
2699                 break;
2700
2701         default:
2702                 DPRINTF(UDMASS_SCSI, ("%s: Autosense failed, status %d\n",
2703                         USBDEVNAME(sc->sc_dev), status));
2704                 ccb->ccb_h.status = CAM_AUTOSENSE_FAIL;
2705                 xpt_done(ccb);
2706         }
2707 }
2708
2709 /*
2710  * This completion code just handles the fact that we sent a test-unit-ready
2711  * after having previously failed a READ CAPACITY with CHECK_COND.  Even
2712  * though this command succeeded, we have to tell CAM to retry.
2713  */
2714 Static void
2715 umass_cam_quirk_cb(struct umass_softc *sc, void *priv, int residue, int status)
2716 {
2717         union ccb *ccb = (union ccb *) priv;
2718
2719         DPRINTF(UDMASS_SCSI, ("%s: Test unit ready returned status %d\n",
2720         USBDEVNAME(sc->sc_dev), status));
2721 #if 0
2722         ccb->ccb_h.status = CAM_REQ_CMP;
2723 #endif
2724         ccb->ccb_h.status = CAM_SCSI_STATUS_ERROR
2725                             | CAM_AUTOSNS_VALID;
2726         ccb->csio.scsi_status = SCSI_STATUS_CHECK_COND;
2727         xpt_done(ccb);
2728 }
2729
2730 Static int
2731 umass_driver_load(module_t mod, int what, void *arg)
2732 {
2733         switch (what) {
2734         case MOD_UNLOAD:
2735         case MOD_LOAD:
2736         default:
2737                 return(usbd_driver_load(mod, what, arg));
2738         }
2739 }
2740
2741 /*
2742  * SCSI specific functions
2743  */
2744
2745 Static int
2746 umass_scsi_transform(struct umass_softc *sc, unsigned char *cmd, int cmdlen,
2747                      unsigned char **rcmd, int *rcmdlen)
2748 {
2749         switch (cmd[0]) {
2750         case TEST_UNIT_READY:
2751                 if (sc->quirks & NO_TEST_UNIT_READY) {
2752                         KASSERT(*rcmdlen >= sizeof(struct scsi_start_stop_unit),
2753                                 ("rcmdlen = %d < %ld, buffer too small",
2754                                  *rcmdlen,
2755                                  (long)sizeof(struct scsi_start_stop_unit)));
2756                         DPRINTF(UDMASS_SCSI, ("%s: Converted TEST_UNIT_READY "
2757                                 "to START_UNIT\n", USBDEVNAME(sc->sc_dev)));
2758                         memset(*rcmd, 0, *rcmdlen);
2759                         (*rcmd)[0] = START_STOP_UNIT;
2760                         (*rcmd)[4] = SSS_START;
2761                         return 1;
2762                 }
2763                 /* fallthrough */
2764         case INQUIRY:
2765                 /* some drives wedge when asked for full inquiry information. */
2766                 if (sc->quirks & FORCE_SHORT_INQUIRY) {
2767                         memcpy(*rcmd, cmd, cmdlen);
2768                         *rcmdlen = cmdlen;
2769                         (*rcmd)[4] = SHORT_INQUIRY_LENGTH;
2770                         return 1;
2771                 }
2772                 /* fallthrough */
2773         default:
2774                 *rcmd = cmd;            /* We don't need to copy it */
2775                 *rcmdlen = cmdlen;
2776         }
2777
2778         return 1;
2779 }
2780 /* RBC specific functions */
2781 Static int
2782 umass_rbc_transform(struct umass_softc *sc, unsigned char *cmd, int cmdlen,
2783                      unsigned char **rcmd, int *rcmdlen)
2784 {
2785         switch (cmd[0]) {
2786         /* these commands are defined in RBC: */
2787         case READ_10:
2788         case READ_CAPACITY:
2789         case START_STOP_UNIT:
2790         case SYNCHRONIZE_CACHE:
2791         case WRITE_10:
2792         case 0x2f: /* VERIFY_10 is absent from scsi_all.h??? */
2793         case INQUIRY:
2794         case MODE_SELECT_10:
2795         case MODE_SENSE_10:
2796         case TEST_UNIT_READY:
2797         case WRITE_BUFFER:
2798          /* The following commands are not listed in my copy of the RBC specs.
2799           * CAM however seems to want those, and at least the Sony DSC device
2800           * appears to support those as well */
2801         case REQUEST_SENSE:
2802         case PREVENT_ALLOW:
2803                 *rcmd = cmd;            /* We don't need to copy it */
2804                 *rcmdlen = cmdlen;
2805                 return 1;
2806         /* All other commands are not legal in RBC */
2807         default:
2808                 printf("%s: Unsupported RBC command 0x%02x",
2809                         USBDEVNAME(sc->sc_dev), cmd[0]);
2810                 printf("\n");
2811                 return 0;       /* failure */
2812         }
2813 }
2814
2815 /*
2816  * UFI specific functions
2817  */
2818 Static int
2819 umass_ufi_transform(struct umass_softc *sc, unsigned char *cmd, int cmdlen,
2820                     unsigned char **rcmd, int *rcmdlen)
2821 {
2822         /* A UFI command is always 12 bytes in length */
2823         KASSERT(*rcmdlen >= UFI_COMMAND_LENGTH,
2824                 ("rcmdlen = %d < %d, buffer too small",
2825                  *rcmdlen, UFI_COMMAND_LENGTH));
2826
2827         *rcmdlen = UFI_COMMAND_LENGTH;
2828         memset(*rcmd, 0, UFI_COMMAND_LENGTH);
2829
2830         switch (cmd[0]) {
2831         /* Commands of which the format has been verified. They should work.
2832          * Copy the command into the (zeroed out) destination buffer.
2833          */
2834         case TEST_UNIT_READY:
2835                 if (sc->quirks &  NO_TEST_UNIT_READY) {
2836                         /* Some devices do not support this command.
2837                          * Start Stop Unit should give the same results
2838                          */
2839                         DPRINTF(UDMASS_UFI, ("%s: Converted TEST_UNIT_READY "
2840                                 "to START_UNIT\n", USBDEVNAME(sc->sc_dev)));
2841                         (*rcmd)[0] = START_STOP_UNIT;
2842                         (*rcmd)[4] = SSS_START;
2843                 } else {
2844                         memcpy(*rcmd, cmd, cmdlen);
2845                 }
2846                 return 1;
2847
2848         case REZERO_UNIT:
2849         case REQUEST_SENSE:
2850         case INQUIRY:
2851         case START_STOP_UNIT:
2852         case SEND_DIAGNOSTIC:
2853         case PREVENT_ALLOW:
2854         case READ_CAPACITY:
2855         case READ_10:
2856         case WRITE_10:
2857         case POSITION_TO_ELEMENT:       /* SEEK_10 */
2858         case MODE_SELECT_10:
2859         case MODE_SENSE_10:
2860         case READ_12:
2861         case WRITE_12:
2862                 memcpy(*rcmd, cmd, cmdlen);
2863                 return 1;
2864
2865         /* Other UFI commands: FORMAT_UNIT, READ_FORMAT_CAPACITY,
2866          * VERIFY, WRITE_AND_VERIFY.
2867          * These should be checked whether they somehow can be made to fit.
2868          */
2869
2870         default:
2871                 printf("%s: Unsupported UFI command 0x%02x\n",
2872                         USBDEVNAME(sc->sc_dev), cmd[0]);
2873                 return 0;       /* failure */
2874         }
2875 }
2876
2877 /*
2878  * 8070i (ATAPI) specific functions
2879  */
2880 Static int
2881 umass_atapi_transform(struct umass_softc *sc, unsigned char *cmd, int cmdlen,
2882                       unsigned char **rcmd, int *rcmdlen)
2883 {
2884         /* An ATAPI command is always 12 bytes in length. */
2885         KASSERT(*rcmdlen >= ATAPI_COMMAND_LENGTH,
2886                 ("rcmdlen = %d < %d, buffer too small",
2887                  *rcmdlen, ATAPI_COMMAND_LENGTH));
2888
2889         *rcmdlen = ATAPI_COMMAND_LENGTH;
2890         memset(*rcmd, 0, ATAPI_COMMAND_LENGTH);
2891
2892         switch (cmd[0]) {
2893         /* Commands of which the format has been verified. They should work.
2894          * Copy the command into the (zeroed out) destination buffer.
2895          */
2896         case INQUIRY:
2897                 memcpy(*rcmd, cmd, cmdlen);
2898                 /* some drives wedge when asked for full inquiry information. */
2899                 if (sc->quirks & FORCE_SHORT_INQUIRY)
2900                         (*rcmd)[4] = SHORT_INQUIRY_LENGTH;
2901                 return 1;
2902
2903         case TEST_UNIT_READY:
2904                 if (sc->quirks & NO_TEST_UNIT_READY) {
2905                         KASSERT(*rcmdlen >= sizeof(struct scsi_start_stop_unit),
2906                                 ("rcmdlen = %d < %ld, buffer too small",
2907                                  *rcmdlen,
2908                                  (long)sizeof(struct scsi_start_stop_unit)));
2909                         DPRINTF(UDMASS_SCSI, ("%s: Converted TEST_UNIT_READY "
2910                                 "to START_UNIT\n", USBDEVNAME(sc->sc_dev)));
2911                         memset(*rcmd, 0, *rcmdlen);
2912                         (*rcmd)[0] = START_STOP_UNIT;
2913                         (*rcmd)[4] = SSS_START;
2914                         return 1;
2915                 }
2916                 /* fallthrough */
2917         case REZERO_UNIT:
2918         case REQUEST_SENSE:
2919         case START_STOP_UNIT:
2920         case SEND_DIAGNOSTIC:
2921         case PREVENT_ALLOW:
2922         case READ_CAPACITY:
2923         case READ_10:
2924         case WRITE_10:
2925         case POSITION_TO_ELEMENT:       /* SEEK_10 */
2926         case SYNCHRONIZE_CACHE:
2927         case MODE_SELECT_10:
2928         case MODE_SENSE_10:
2929                 memcpy(*rcmd, cmd, cmdlen);
2930                 return 1;
2931
2932         case READ_12:
2933         case WRITE_12:
2934         default:
2935                 printf("%s: Unsupported ATAPI command 0x%02x\n",
2936                         USBDEVNAME(sc->sc_dev), cmd[0]);
2937                 return 0;       /* failure */
2938         }
2939 }
2940
2941
2942 /* (even the comment is missing) */
2943
2944 DRIVER_MODULE(umass, uhub, umass_driver, umass_devclass, umass_driver_load, 0);
2945
2946
2947
2948 #ifdef USB_DEBUG
2949 Static void
2950 umass_bbb_dump_cbw(struct umass_softc *sc, umass_bbb_cbw_t *cbw)
2951 {
2952         int clen = cbw->bCDBLength;
2953         int dlen = UGETDW(cbw->dCBWDataTransferLength);
2954         u_int8_t *c = cbw->CBWCDB;
2955         int tag = UGETDW(cbw->dCBWTag);
2956         int flags = cbw->bCBWFlags;
2957
2958         DPRINTF(UDMASS_BBB, ("%s: CBW %d: cmd = %db "
2959                 "(0x%02x%02x%02x%02x%02x%02x%s), "
2960                 "data = %db, dir = %s\n",
2961                 USBDEVNAME(sc->sc_dev), tag, clen,
2962                 c[0], c[1], c[2], c[3], c[4], c[5], (clen > 6? "...":""),
2963                 dlen, (flags == CBWFLAGS_IN? "in":
2964                        (flags == CBWFLAGS_OUT? "out":"<invalid>"))));
2965 }
2966
2967 Static void
2968 umass_bbb_dump_csw(struct umass_softc *sc, umass_bbb_csw_t *csw)
2969 {
2970         int sig = UGETDW(csw->dCSWSignature);
2971         int tag = UGETW(csw->dCSWTag);
2972         int res = UGETDW(csw->dCSWDataResidue);
2973         int status = csw->bCSWStatus;
2974
2975         DPRINTF(UDMASS_BBB, ("%s: CSW %d: sig = 0x%08x (%s), tag = %d, "
2976                 "res = %d, status = 0x%02x (%s)\n", USBDEVNAME(sc->sc_dev),
2977                 tag, sig, (sig == CSWSIGNATURE?  "valid":"invalid"),
2978                 tag, res,
2979                 status, (status == CSWSTATUS_GOOD? "good":
2980                          (status == CSWSTATUS_FAILED? "failed":
2981                           (status == CSWSTATUS_PHASE? "phase":"<invalid>")))));
2982 }
2983
2984 Static void
2985 umass_cbi_dump_cmd(struct umass_softc *sc, void *cmd, int cmdlen)
2986 {
2987         u_int8_t *c = cmd;
2988         int dir = sc->transfer_dir;
2989
2990         DPRINTF(UDMASS_BBB, ("%s: cmd = %db "
2991                 "(0x%02x%02x%02x%02x%02x%02x%s), "
2992                 "data = %db, dir = %s\n",
2993                 USBDEVNAME(sc->sc_dev), cmdlen,
2994                 c[0], c[1], c[2], c[3], c[4], c[5], (cmdlen > 6? "...":""),
2995                 sc->transfer_datalen,
2996                 (dir == DIR_IN? "in":
2997                  (dir == DIR_OUT? "out":
2998                   (dir == DIR_NONE? "no data phase": "<invalid>")))));
2999 }
3000
3001 Static void
3002 umass_dump_buffer(struct umass_softc *sc, u_int8_t *buffer, int buflen,
3003                   int printlen)
3004 {
3005         int i, j;
3006         char s1[40];
3007         char s2[40];
3008         char s3[5];
3009
3010         s1[0] = '\0';
3011         s3[0] = '\0';
3012
3013         sprintf(s2, " buffer=%p, buflen=%d", buffer, buflen);
3014         for (i = 0; i < buflen && i < printlen; i++) {
3015                 j = i % 16;
3016                 if (j == 0 && i != 0) {
3017                         DPRINTF(UDMASS_GEN, ("%s: 0x %s%s\n",
3018                                 USBDEVNAME(sc->sc_dev), s1, s2));
3019                         s2[0] = '\0';
3020                 }
3021                 sprintf(&s1[j*2], "%02x", buffer[i] & 0xff);
3022         }
3023         if (buflen > printlen)
3024                 sprintf(s3, " ...");
3025         DPRINTF(UDMASS_GEN, ("%s: 0x %s%s%s\n",
3026                 USBDEVNAME(sc->sc_dev), s1, s2, s3));
3027 }
3028 #endif