2 # JG64 -- Generic kernel configuration file for DragonFly/x86_64
4 # Check the LINT configuration file in sys/config, for an
5 # exhaustive list of options.
7 # $DragonFly: src/sys/config/JG64,v 1.2 2008/09/28 20:58:11 victor Exp $
16 makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols
18 ##options MATH_EMULATE #Support for x87 emulation
19 options INET #InterNETworking
20 options INET6 #IPv6 communications protocols
21 options HAMMER #Hammer Filesystem
22 options NULLFS #NULLFS
23 options FFS #Berkeley Fast Filesystem
24 options FFS_ROOT #FFS usable as root device [keep this!]
25 options SOFTUPDATES #Enable FFS soft updates support
26 options UFS_DIRHASH #Improve performance on big directories
27 options MFS #Memory Filesystem
28 options MD_ROOT #MD is a potential root device
29 options NFS #Network Filesystem
30 options NFS_ROOT #NFS usable as root device, NFS required
31 options MSDOSFS #MSDOS Filesystem
32 options CD9660 #ISO 9660 Filesystem
33 options PROCFS #Process filesystem
34 #JG do we need it? does it work (on x86_64)?
35 options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!]
36 ##options COMPAT_DF12 #Compatible with DragonFly 1.2 and earlier
37 options SCSI_DELAY=5000 #Delay (in ms) before probing SCSI
38 options DEVICE_POLLING # Support mixed interrupt-polling
39 # handling of network device drivers
40 ##options UCONSOLE #Allow users to grab the console
41 ##options USERCONFIG #boot -c editor
42 ##options VISUAL_USERCONFIG #visual boot -c editor
43 options KTRACE #ktrace(1) support
44 options SYSVSHM #SYSV-style shared memory
45 options SYSVMSG #SYSV-style message queues
46 options SYSVSEM #SYSV-style semaphores
47 options P1003_1B #Posix P1003_1B real-time extensions
48 options _KPOSIX_PRIORITY_SCHEDULING
49 ##options ICMP_BANDLIM #Rate limit bad replies
50 ##options KBD_INSTALL_CDEV # install a CDEV entry in /dev
51 options AHC_REG_PRETTY_PRINT # Print register bitfields in debug
52 # output. Adds ~128k to driver.
53 options AHD_REG_PRETTY_PRINT # Print register bitfields in debug
54 # output. Adds ~215k to driver.
56 # To make an SMP kernel both SMP and APIC_IO are usually
57 # specified. SMP boxes with severely broken BIOSes which
58 # boot fine for non-SMP builds *might* work in SMP mode
59 # if you define SMP and leave APIC_IO turned off.
61 #options SMP # Symmetric MultiProcessor Kernel
62 #options APIC_IO # Symmetric (APIC) I/O
64 # Debugging for Development
74 ##device fdc0 at isa? port IO_FD1 irq 6 drq 2
75 ##device fd0 at fdc0 drive 0
76 ##device fd1 at fdc0 drive 1
78 # If you have a Toshiba Libretto with its Y-E Data PCMCIA floppy,
79 # don't use the above line for fdc0 but the following one:
82 # AHCI driver, this will override NATA for AHCI devices,
83 # both drivers may be included.
87 # Sil3124/3132/3531 driver
91 # NEW-ATA (NATA) and ATAPI devices
94 device natadisk # ATA disk drives
95 device natapicd # ATAPI CDROM drives
96 device natapifd # ATAPI floppy drives
97 device natapist # ATAPI tape drives
98 device natapicam # Emulate ATAPI devices as SCSI
99 device nataraid # support for ATA software RAID
101 ##device natausb # ATA-over-USB support
102 options ATA_STATIC_ID # Static device numbering
104 # LEGACY ATA and ATAPI devices
105 #device ata0 at isa? port IO_WD1 irq 14
106 #device ata1 at isa? port IO_WD2 irq 15
108 #device atadisk # ATA disk drives
109 #device atapicd # ATAPI CDROM drives
110 #device atapifd # ATAPI floppy drives
111 #device atapist # ATAPI tape drives
112 #device atapicam # Emulate ATAPI devices as SCSI via CAM
113 #options ATA_STATIC_ID #Static device numbering
116 ##device ahb # EISA AHA1742 family
117 ##device ahc # AHA2940 and onboard AIC7xxx devices
118 ##device ahd # AHA39320/29320 and onboard AIC79xx devices
119 ##device amd # AMD 53C974 (Tekram DC-390(T))
120 ##device isp # Qlogic family
121 ##device mpt # LSI-Logic MPT/Fusion
122 ##device ncr # NCR/Symbios Logic
123 ##device sym # NCR/Symbios Logic (newer chipsets)
124 ##options SYM_SETUP_LP_PROBE_MAP=0x40
125 # Allow ncr to attach legacy NCR devices when
126 # both sym and ncr are configured
128 ##device adv0 at isa?
131 ##device aha0 at isa?
132 ##device aic0 at isa?
134 ##device ncv # NCR 53C500
135 ##device nsp # Workbit Ninja SCSI-3
136 ##device stg # TMC 18C30/18C50
139 device scbus # SCSI bus (required)
140 device da # Direct Access (disks)
141 device sa # Sequential Access (tape etc)
143 device pass # Passthrough device (direct SCSI access)
145 # RAID controllers interfaced to the SCSI subsystem
146 ##device asr # DPT SmartRAID V, VI and Adaptec SCSI RAID
147 ##device dpt # DPT Smartcache - See LINT for options!
148 ##device iir # Intel Integrated RAID
149 ##device mly # Mylex AcceleRAID/eXtremeRAID
150 ##device ciss # Compaq SmartRAID 5* series
153 ##device aac # Adaptec FSA RAID, Dell PERC2/PERC3
154 #device aacp # SCSI passthrough for aac (requires CAM)
155 ##device ida # Compaq Smart RAID
156 ##device ips # IBM ServeRAID
157 ##device amr # AMI MegaRAID
158 ##device mlx # Mylex DAC960 family
159 ##device twe # 3ware Escalade 7000/8000's
160 ##device twa # 3ware Escalade 9000's
161 ##device pst # Promise Supertrack
163 # atkbdc0 controls both the keyboard and the PS/2 mouse
164 device atkbdc0 at isa? port IO_KBD
165 device atkbd0 at atkbdc? irq 1 flags 0x1
166 device psm0 at atkbdc? irq 12
170 # splash screen/screen saver
173 # syscons is the default console driver, resembling an SCO console
174 device sc0 at isa? flags 0x100
175 ##options SC_PIXEL_MODE # add support for the raster text mode
177 ##device agp # support several AGP chipsets
179 # Floating point support - do not disable.
180 ##device npx0 at nexus? port IO_NPX irq 13
182 # Power management support (see LINT for more options)
183 ##device apm0 at nexus? disable flags 0x20 # Advanced Power Management
185 # HW monitoring devices
186 ##device lm0 at isa? port 0x290
187 ##device it0 at isa? port 0x290
188 ##device it1 at isa? port 0xc00
189 ##device it2 at isa? port 0xd00
191 # PCCARD (PCMCIA) support
197 device sio0 at isa? port IO_COM1 flags 0x10 irq 4
198 device sio1 at isa? port IO_COM2 irq 3
199 device sio2 at isa? disable port IO_COM3 irq 5
200 device sio3 at isa? disable port IO_COM4 irq 9
203 ##device ppc0 at isa? irq 7
204 ##device ppbus # Parallel port bus (required)
205 ##device lpt # Printer
206 ##device plip # TCP/IP over parallel
207 ##device ppi # Parallel port interface device
208 #device vpo # Requires scbus and da
212 device de # DEC/Intel DC21x4x (``Tulip'')
213 device txp # 3Com 3cR990 (``Typhoon'')
214 device vx # 3Com 3c590, 3c595 (``Vortex'')
216 device em # Intel PRO/1000 adapter Gigabit Ethernet Card (``Wiseman'')
218 device ig_hal # Intel PRO/1000 hardware abstraction layer
220 # PCI Ethernet NICs that use the common MII bus controller code.
221 # NOTE: Be sure to keep the 'device miibus' line in order to use these NICs!
222 device miibus # MII bus support
223 device bce # Broadcom NetXtreme II Gigabit Ethernet
224 device bfe # Broadcom BCM440x 10/100 Ethernet
225 device dc # DEC/Intel 21143 and various workalikes
226 device et # Agere ET1310 10/100/1000 Ethernet
227 device fxp # Intel EtherExpress PRO/100B (82557, 82558)
228 device pcn # AMD Am79C97x PCI 10/100 NICs
229 device rl # RealTek 8129/8139
230 device re # RealTek 8139C+/8169
231 device sf # Adaptec AIC-6915 (``Starfire'')
232 device sis # Silicon Integrated Systems SiS 900/SiS 7016
233 device sk # SysKonnect GEnesis, LinkSys EG1023, D-Link
234 device ste # Sundance ST201 (D-Link DFE-550TX)
235 device tl # Texas Instruments ThunderLAN
236 device tx # SMC EtherPower II (83c170 ``EPIC'')
237 device vge # VIA 612x GigE
238 device vr # VIA Rhine, Rhine II
239 device wb # Winbond W89C840F
240 device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'')
241 device bge # Broadcom BCM570x (``Tigon III'')
242 device stge # Sundance/Tamarack TC9021 Gigabit Ethernet
243 device msk # Marvell/SysKonnect Yukon II Gigabit Ethernet
244 device nfe # NVIDIA nForce MCP 10/100/Gigabit Ethernet
247 # 'device ed' requires 'device miibus'
248 ##device ed0 at isa? disable port 0x280 irq 10 iomem 0xd8000
251 ##device fe0 at isa? disable port 0x300
256 ##device wlan # 802.11 support
257 ##device wlan_ccmp # 802.11 CCMP support
258 ##device wlan_tkip # 802.11 TKIP support
259 ##device wlan_wep # 802.11 WEP support
260 # 802.11 TX rate control algorithms
261 #device wlan_ratectl_amrr # AMRR
262 ##device wlan_ratectl_onoe # Onoe
263 ##device wlan_ratectl_sample # Sample
265 # Aironet 4500/4800 802.11 wireless NICs. Note: the declaration below will
266 # work for PCMCIA and PCI cards, as well as ISA cards set to ISA PnP
267 # mode (the factory default). If you set the switches on your ISA
268 # card for a manually chosen I/O address and IRQ, you must specify
269 # those parameters here.
271 ##device ral # Ralink Technology 802.11 wireless NIC
272 # Requires wlan_ratectl_onoe and
273 # wlan_ratectl_sample
274 ##device rtw # RealTek 802.11 wireless NIC
275 # Requires wlan_ratectl_onoe and wlan_wep
276 # WaveLAN/IEEE 802.11 wireless NICs. Note: the WaveLAN/IEEE really
277 # exists only as a PCMCIA device, so there is no ISA attachment needed
278 # and resources will always be dynamically assigned by the pccard code.
281 # The probe order of these is presently determined by i386/isa/isa_compat.c.
282 ##device ie0 at isa? disable port 0x300 irq 10 iomem 0xd0000
283 #device le0 at isa? disable port 0x300 irq 5 iomem 0xd0000
284 ##device lnc0 at isa? disable port 0x280 irq 10 drq 0
285 ##device cs0 at isa? disable port 0x300
286 ##device sn0 at isa? disable port 0x300 irq 10
288 # Pseudo devices - the number indicates how many units to allocate.
289 pseudo-device loop # Network loopback
290 pseudo-device ether # Ethernet support
291 pseudo-device sl 1 # Kernel SLIP
292 pseudo-device ppp 1 # Kernel PPP
293 pseudo-device tun # Packet tunnel.
294 pseudo-device pty # Pseudo-ttys (telnet etc)
295 pseudo-device md # Memory "disks"
296 pseudo-device gif # IPv6 and IPv4 tunneling
297 pseudo-device faith 1 # IPv6-to-IPv4 relaying (translation)
299 # The `bpf' pseudo-device enables the Berkeley Packet Filter.
300 # Be aware of the administrative consequences of enabling this!
301 pseudo-device bpf #Berkeley packet filter
303 ##pseudo-device crypto # core crypto support, used by wlan
306 device uhci # UHCI PCI->USB interface
307 device ohci # OHCI PCI->USB interface
308 device usb # USB Bus (required)
309 device ugen # Generic
310 device uhid # "Human Interface Devices"
311 device ukbd # Keyboard
312 device ulpt # Printer
313 device umass # Disks/Mass storage - Requires scbus and da
315 device uscanner # Scanners
316 device urio # Diamond Rio MP3 Player
317 # USB Ethernet, requires mii
318 device aue # ADMtek USB ethernet
319 device axe # ASIX Electronics USB Ethernet
320 device cue # CATC USB ethernet
321 device kue # Kawasaki LSI USB ethernet
322 #device rue # RealTek 8150 based USB ethernet
323 # USB wireless NICs, requires wlan, wlan_ratectl_onoe
324 #device rum # Ralink Technology RT2501USB/RT2601USB
325 #device ural # Ralink Technology RT2500USB
328 ##device firewire # FireWire bus code
329 ##device sbp # SCSI over FireWire (Requires scbus and da)
330 ##device fwe # Ethernet over FireWire (non-standard!)