Merge branch 'vendor/OPENSSH'
[dragonfly.git] / sys / vfs / hammer / hammer_flusher.c
1 /*
2  * Copyright (c) 2008 The DragonFly Project.  All rights reserved.
3  * 
4  * This code is derived from software contributed to The DragonFly Project
5  * by Matthew Dillon <dillon@backplane.com>
6  * 
7  * Redistribution and use in source and binary forms, with or without
8  * modification, are permitted provided that the following conditions
9  * are met:
10  * 
11  * 1. Redistributions of source code must retain the above copyright
12  *    notice, this list of conditions and the following disclaimer.
13  * 2. Redistributions in binary form must reproduce the above copyright
14  *    notice, this list of conditions and the following disclaimer in
15  *    the documentation and/or other materials provided with the
16  *    distribution.
17  * 3. Neither the name of The DragonFly Project nor the names of its
18  *    contributors may be used to endorse or promote products derived
19  *    from this software without specific, prior written permission.
20  * 
21  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
22  * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
23  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
24  * FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE
25  * COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
26  * INCIDENTAL, SPECIAL, EXEMPLARY OR CONSEQUENTIAL DAMAGES (INCLUDING,
27  * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
28  * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
29  * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
30  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
31  * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
32  * SUCH DAMAGE.
33  * 
34  * $DragonFly: src/sys/vfs/hammer/hammer_flusher.c,v 1.45 2008/07/31 04:42:04 dillon Exp $
35  */
36 /*
37  * HAMMER dependancy flusher thread
38  *
39  * Meta data updates create buffer dependancies which are arranged as a
40  * hierarchy of lists.
41  */
42
43 #include "hammer.h"
44
45 static void hammer_flusher_master_thread(void *arg);
46 static void hammer_flusher_slave_thread(void *arg);
47 static void hammer_flusher_flush(hammer_mount_t hmp);
48 static void hammer_flusher_flush_inode(hammer_inode_t ip,
49                                         hammer_transaction_t trans);
50
51 /*
52  * Support structures for the flusher threads.
53  */
54 struct hammer_flusher_info {
55         TAILQ_ENTRY(hammer_flusher_info) entry;
56         struct hammer_mount *hmp;
57         thread_t        td;
58         int             runstate;
59         int             count;
60         hammer_flush_group_t flg;
61         hammer_inode_t  work_array[HAMMER_FLUSH_GROUP_SIZE];
62 };
63
64 typedef struct hammer_flusher_info *hammer_flusher_info_t;
65
66 /*
67  * Sync all inodes pending on the flusher.
68  *
69  * All flush groups will be flushed.  This does not queue dirty inodes
70  * to the flush groups, it just flushes out what has already been queued!
71  */
72 void
73 hammer_flusher_sync(hammer_mount_t hmp)
74 {
75         int seq;
76
77         seq = hammer_flusher_async(hmp, NULL);
78         hammer_flusher_wait(hmp, seq);
79 }
80
81 /*
82  * Sync all inodes pending on the flusher - return immediately.
83  *
84  * All flush groups will be flushed.
85  */
86 int
87 hammer_flusher_async(hammer_mount_t hmp, hammer_flush_group_t close_flg)
88 {
89         hammer_flush_group_t flg;
90         int seq = hmp->flusher.next;
91
92         TAILQ_FOREACH(flg, &hmp->flush_group_list, flush_entry) {
93                 if (flg->running == 0)
94                         ++seq;
95                 flg->closed = 1;
96                 if (flg == close_flg)
97                         break;
98         }
99         if (hmp->flusher.td) {
100                 if (hmp->flusher.signal++ == 0)
101                         wakeup(&hmp->flusher.signal);
102         } else {
103                 seq = hmp->flusher.done;
104         }
105         return(seq);
106 }
107
108 int
109 hammer_flusher_async_one(hammer_mount_t hmp)
110 {
111         int seq;
112
113         if (hmp->flusher.td) {
114                 seq = hmp->flusher.next;
115                 if (hmp->flusher.signal++ == 0)
116                         wakeup(&hmp->flusher.signal);
117         } else {
118                 seq = hmp->flusher.done;
119         }
120         return(seq);
121 }
122
123 /*
124  * Wait for the flusher to get to the specified sequence number.
125  * Signal the flusher as often as necessary to keep it going.
126  */
127 void
128 hammer_flusher_wait(hammer_mount_t hmp, int seq)
129 {
130         while ((int)(seq - hmp->flusher.done) > 0) {
131                 if (hmp->flusher.act != seq) {
132                         if (hmp->flusher.signal++ == 0)
133                                 wakeup(&hmp->flusher.signal);
134                 }
135                 tsleep(&hmp->flusher.done, 0, "hmrfls", 0);
136         }
137 }
138
139 void
140 hammer_flusher_wait_next(hammer_mount_t hmp)
141 {
142         int seq;
143
144         seq = hammer_flusher_async_one(hmp);
145         hammer_flusher_wait(hmp, seq);
146 }
147
148 void
149 hammer_flusher_create(hammer_mount_t hmp)
150 {
151         hammer_flusher_info_t info;
152         int i;
153
154         hmp->flusher.signal = 0;
155         hmp->flusher.act = 0;
156         hmp->flusher.done = 0;
157         hmp->flusher.next = 1;
158         hammer_ref(&hmp->flusher.finalize_lock);
159         TAILQ_INIT(&hmp->flusher.run_list);
160         TAILQ_INIT(&hmp->flusher.ready_list);
161
162         lwkt_create(hammer_flusher_master_thread, hmp,
163                     &hmp->flusher.td, NULL, 0, -1, "hammer-M");
164         for (i = 0; i < HAMMER_MAX_FLUSHERS; ++i) {
165                 info = kmalloc(sizeof(*info), hmp->m_misc, M_WAITOK|M_ZERO);
166                 info->hmp = hmp;
167                 TAILQ_INSERT_TAIL(&hmp->flusher.ready_list, info, entry);
168                 lwkt_create(hammer_flusher_slave_thread, info,
169                             &info->td, NULL, 0, -1, "hammer-S%d", i);
170         }
171 }
172
173 void
174 hammer_flusher_destroy(hammer_mount_t hmp)
175 {
176         hammer_flusher_info_t info;
177
178         /*
179          * Kill the master
180          */
181         hmp->flusher.exiting = 1;
182         while (hmp->flusher.td) {
183                 ++hmp->flusher.signal;
184                 wakeup(&hmp->flusher.signal);
185                 tsleep(&hmp->flusher.exiting, 0, "hmrwex", hz);
186         }
187
188         /*
189          * Kill the slaves
190          */
191         while ((info = TAILQ_FIRST(&hmp->flusher.ready_list)) != NULL) {
192                 KKASSERT(info->runstate == 0);
193                 TAILQ_REMOVE(&hmp->flusher.ready_list, info, entry);
194                 info->runstate = -1;
195                 wakeup(&info->runstate);
196                 while (info->td)
197                         tsleep(&info->td, 0, "hmrwwc", 0);
198                 kfree(info, hmp->m_misc);
199         }
200 }
201
202 /*
203  * The master flusher thread manages the flusher sequence id and
204  * synchronization with the slave work threads.
205  */
206 static void
207 hammer_flusher_master_thread(void *arg)
208 {
209         hammer_flush_group_t flg;
210         hammer_mount_t hmp;
211
212         hmp = arg;
213
214         for (;;) {
215                 /*
216                  * Do at least one flush cycle.  We may have to update the
217                  * UNDO FIFO even if no inodes are queued.
218                  */
219                 for (;;) {
220                         while (hmp->flusher.group_lock)
221                                 tsleep(&hmp->flusher.group_lock, 0, "hmrhld", 0);
222                         hmp->flusher.act = hmp->flusher.next;
223                         ++hmp->flusher.next;
224                         hammer_flusher_clean_loose_ios(hmp);
225                         hammer_flusher_flush(hmp);
226                         hmp->flusher.done = hmp->flusher.act;
227                         wakeup(&hmp->flusher.done);
228                         flg = TAILQ_FIRST(&hmp->flush_group_list);
229                         if (flg == NULL || flg->closed == 0)
230                                 break;
231                         if (hmp->flags & HAMMER_MOUNT_CRITICAL_ERROR)
232                                 break;
233                 }
234
235                 /*
236                  * Wait for activity.
237                  */
238                 if (hmp->flusher.exiting && TAILQ_EMPTY(&hmp->flush_group_list))
239                         break;
240                 while (hmp->flusher.signal == 0)
241                         tsleep(&hmp->flusher.signal, 0, "hmrwwa", 0);
242
243                 /*
244                  * Flush for each count on signal but only allow one extra
245                  * flush request to build up.
246                  */
247                 if (--hmp->flusher.signal != 0)
248                         hmp->flusher.signal = 1;
249         }
250
251         /*
252          * And we are done.
253          */
254         hmp->flusher.td = NULL;
255         wakeup(&hmp->flusher.exiting);
256         lwkt_exit();
257 }
258
259 /*
260  * Flush all inodes in the current flush group.
261  */
262 static void
263 hammer_flusher_flush(hammer_mount_t hmp)
264 {
265         hammer_flusher_info_t info;
266         hammer_flush_group_t flg;
267         hammer_reserve_t resv;
268         hammer_inode_t ip;
269         hammer_inode_t next_ip;
270         int slave_index;
271         int count;
272
273         /*
274          * Just in-case there's a flush race on mount
275          */
276         if (TAILQ_FIRST(&hmp->flusher.ready_list) == NULL)
277                 return;
278
279         /*
280          * We only do one flg but we may have to loop/retry.
281          */
282         count = 0;
283         while ((flg = TAILQ_FIRST(&hmp->flush_group_list)) != NULL) {
284                 ++count;
285                 if (hammer_debug_general & 0x0001) {
286                         kprintf("hammer_flush %d ttl=%d recs=%d\n",
287                                 hmp->flusher.act,
288                                 flg->total_count, flg->refs);
289                 }
290                 if (hmp->flags & HAMMER_MOUNT_CRITICAL_ERROR)
291                         break;
292                 hammer_start_transaction_fls(&hmp->flusher.trans, hmp);
293
294                 /*
295                  * If the previous flush cycle just about exhausted our
296                  * UNDO space we may have to do a dummy cycle to move the
297                  * first_offset up before actually digging into a new cycle,
298                  * or the new cycle will not have sufficient undo space.
299                  */
300                 if (hammer_flusher_undo_exhausted(&hmp->flusher.trans, 3))
301                         hammer_flusher_finalize(&hmp->flusher.trans, 0);
302
303                 /*
304                  * Ok, we are running this flush group now (this prevents new
305                  * additions to it).
306                  */
307                 flg->running = 1;
308                 if (hmp->next_flush_group == flg)
309                         hmp->next_flush_group = TAILQ_NEXT(flg, flush_entry);
310
311                 /*
312                  * Iterate the inodes in the flg's flush_list and assign
313                  * them to slaves.
314                  */
315                 slave_index = 0;
316                 info = TAILQ_FIRST(&hmp->flusher.ready_list);
317                 next_ip = TAILQ_FIRST(&flg->flush_list);
318
319                 while ((ip = next_ip) != NULL) {
320                         next_ip = TAILQ_NEXT(ip, flush_entry);
321
322                         /*
323                          * Add ip to the slave's work array.  The slave is
324                          * not currently running.
325                          */
326                         info->work_array[info->count++] = ip;
327                         if (info->count != HAMMER_FLUSH_GROUP_SIZE)
328                                 continue;
329
330                         /*
331                          * Get the slave running
332                          */
333                         TAILQ_REMOVE(&hmp->flusher.ready_list, info, entry);
334                         TAILQ_INSERT_TAIL(&hmp->flusher.run_list, info, entry);
335                         info->flg = flg;
336                         info->runstate = 1;
337                         wakeup(&info->runstate);
338
339                         /*
340                          * Get a new slave.  We may have to wait for one to
341                          * finish running.
342                          */
343                         while ((info = TAILQ_FIRST(&hmp->flusher.ready_list)) == NULL) {
344                                 tsleep(&hmp->flusher.ready_list, 0, "hmrfcc", 0);
345                         }
346                 }
347
348                 /*
349                  * Run the current slave if necessary
350                  */
351                 if (info->count) {
352                         TAILQ_REMOVE(&hmp->flusher.ready_list, info, entry);
353                         TAILQ_INSERT_TAIL(&hmp->flusher.run_list, info, entry);
354                         info->flg = flg;
355                         info->runstate = 1;
356                         wakeup(&info->runstate);
357                 }
358
359                 /*
360                  * Wait for all slaves to finish running
361                  */
362                 while (TAILQ_FIRST(&hmp->flusher.run_list) != NULL)
363                         tsleep(&hmp->flusher.ready_list, 0, "hmrfcc", 0);
364
365                 /*
366                  * Do the final finalization, clean up
367                  */
368                 hammer_flusher_finalize(&hmp->flusher.trans, 1);
369                 hmp->flusher.tid = hmp->flusher.trans.tid;
370
371                 hammer_done_transaction(&hmp->flusher.trans);
372
373                 /*
374                  * Loop up on the same flg.  If the flg is done clean it up
375                  * and break out.  We only flush one flg.
376                  */
377                 if (TAILQ_FIRST(&flg->flush_list) == NULL) {
378                         KKASSERT(TAILQ_EMPTY(&flg->flush_list));
379                         KKASSERT(flg->refs == 0);
380                         TAILQ_REMOVE(&hmp->flush_group_list, flg, flush_entry);
381                         kfree(flg, hmp->m_misc);
382                         break;
383                 }
384         }
385
386         /*
387          * We may have pure meta-data to flush, or we may have to finish
388          * cycling the UNDO FIFO, even if there were no flush groups.
389          */
390         if (count == 0 && hammer_flusher_haswork(hmp)) {
391                 hammer_start_transaction_fls(&hmp->flusher.trans, hmp);
392                 hammer_flusher_finalize(&hmp->flusher.trans, 1);
393                 hammer_done_transaction(&hmp->flusher.trans);
394         }
395
396         /*
397          * Clean up any freed big-blocks (typically zone-2). 
398          * resv->flush_group is typically set several flush groups ahead
399          * of the free to ensure that the freed block is not reused until
400          * it can no longer be reused.
401          */
402         while ((resv = TAILQ_FIRST(&hmp->delay_list)) != NULL) {
403                 if (resv->flush_group != hmp->flusher.act)
404                         break;
405                 hammer_reserve_clrdelay(hmp, resv);
406         }
407 }
408
409
410 /*
411  * The slave flusher thread pulls work off the master flush_list until no
412  * work is left.
413  */
414 static void
415 hammer_flusher_slave_thread(void *arg)
416 {
417         hammer_flush_group_t flg;
418         hammer_flusher_info_t info;
419         hammer_mount_t hmp;
420         hammer_inode_t ip;
421         int i;
422
423         info = arg;
424         hmp = info->hmp;
425
426         for (;;) {
427                 while (info->runstate == 0)
428                         tsleep(&info->runstate, 0, "hmrssw", 0);
429                 if (info->runstate < 0)
430                         break;
431                 flg = info->flg;
432
433                 for (i = 0; i < info->count; ++i) {
434                         ip = info->work_array[i];
435                         hammer_flusher_flush_inode(ip, &hmp->flusher.trans);
436                         ++hammer_stats_inode_flushes;
437                 }
438                 info->count = 0;
439                 info->runstate = 0;
440                 TAILQ_REMOVE(&hmp->flusher.run_list, info, entry);
441                 TAILQ_INSERT_TAIL(&hmp->flusher.ready_list, info, entry);
442                 wakeup(&hmp->flusher.ready_list);
443         }
444         info->td = NULL;
445         wakeup(&info->td);
446         lwkt_exit();
447 }
448
449 void
450 hammer_flusher_clean_loose_ios(hammer_mount_t hmp)
451 {
452         hammer_buffer_t buffer;
453         hammer_io_t io;
454
455         /*
456          * loose ends - buffers without bp's aren't tracked by the kernel
457          * and can build up, so clean them out.  This can occur when an
458          * IO completes on a buffer with no references left.
459          */
460         if ((io = TAILQ_FIRST(&hmp->lose_list)) != NULL) {
461                 crit_enter();   /* biodone() race */
462                 while ((io = TAILQ_FIRST(&hmp->lose_list)) != NULL) {
463                         KKASSERT(io->mod_list == &hmp->lose_list);
464                         TAILQ_REMOVE(&hmp->lose_list, io, mod_entry);
465                         io->mod_list = NULL;
466                         if (io->lock.refs == 0)
467                                 ++hammer_count_refedbufs;
468                         hammer_ref(&io->lock);
469                         buffer = (void *)io;
470                         hammer_rel_buffer(buffer, 0);
471                 }
472                 crit_exit();
473         }
474 }
475
476 /*
477  * Flush a single inode that is part of a flush group.
478  *
479  * Flusher errors are extremely serious, even ENOSPC shouldn't occur because
480  * the front-end should have reserved sufficient space on the media.  Any
481  * error other then EWOULDBLOCK will force the mount to be read-only.
482  */
483 static
484 void
485 hammer_flusher_flush_inode(hammer_inode_t ip, hammer_transaction_t trans)
486 {
487         hammer_mount_t hmp = ip->hmp;
488         int error;
489
490         hammer_flusher_clean_loose_ios(hmp);
491         error = hammer_sync_inode(trans, ip);
492
493         /*
494          * EWOULDBLOCK can happen under normal operation, all other errors
495          * are considered extremely serious.  We must set WOULDBLOCK
496          * mechanics to deal with the mess left over from the abort of the
497          * previous flush.
498          */
499         if (error) {
500                 ip->flags |= HAMMER_INODE_WOULDBLOCK;
501                 if (error == EWOULDBLOCK)
502                         error = 0;
503         }
504         hammer_flush_inode_done(ip, error);
505         while (hmp->flusher.finalize_want)
506                 tsleep(&hmp->flusher.finalize_want, 0, "hmrsxx", 0);
507         if (hammer_flusher_undo_exhausted(trans, 1)) {
508                 kprintf("HAMMER: Warning: UNDO area too small!\n");
509                 hammer_flusher_finalize(trans, 1);
510         } else if (hammer_flusher_meta_limit(trans->hmp)) {
511                 hammer_flusher_finalize(trans, 0);
512         }
513 }
514
515 /*
516  * Return non-zero if the UNDO area has less then (QUARTER / 4) of its
517  * space left.
518  *
519  * 1/4 - Emergency free undo space level.  Below this point the flusher
520  *       will finalize even if directory dependancies have not been resolved.
521  *
522  * 2/4 - Used by the pruning and reblocking code.  These functions may be
523  *       running in parallel with a flush and cannot be allowed to drop
524  *       available undo space to emergency levels.
525  *
526  * 3/4 - Used at the beginning of a flush to force-sync the volume header
527  *       to give the flush plenty of runway to work in.
528  */
529 int
530 hammer_flusher_undo_exhausted(hammer_transaction_t trans, int quarter)
531 {
532         if (hammer_undo_space(trans) <
533             hammer_undo_max(trans->hmp) * quarter / 4) {
534                 return(1);
535         } else {
536                 return(0);
537         }
538 }
539
540 /*
541  * Flush all pending UNDOs, wait for write completion, update the volume
542  * header with the new UNDO end position, and flush it.  Then
543  * asynchronously flush the meta-data.
544  *
545  * If this is the last finalization in a flush group we also synchronize
546  * our cached blockmap and set hmp->flusher_undo_start and our cached undo
547  * fifo first_offset so the next flush resets the FIFO pointers.
548  *
549  * If this is not final it is being called because too many dirty meta-data
550  * buffers have built up and must be flushed with UNDO synchronization to
551  * avoid a buffer cache deadlock.
552  */
553 void
554 hammer_flusher_finalize(hammer_transaction_t trans, int final)
555 {
556         hammer_volume_t root_volume;
557         hammer_blockmap_t cundomap, dundomap;
558         hammer_mount_t hmp;
559         hammer_io_t io;
560         int count;
561         int i;
562
563         hmp = trans->hmp;
564         root_volume = trans->rootvol;
565
566         /*
567          * Exclusively lock the flusher.  This guarantees that all dirty
568          * buffers will be idled (have a mod-count of 0).
569          */
570         ++hmp->flusher.finalize_want;
571         hammer_lock_ex(&hmp->flusher.finalize_lock);
572
573         /*
574          * If this isn't the final sync several threads may have hit the
575          * meta-limit at the same time and raced.  Only sync if we really
576          * have to, after acquiring the lock.
577          */
578         if (final == 0 && !hammer_flusher_meta_limit(hmp))
579                 goto done;
580
581         if (hmp->flags & HAMMER_MOUNT_CRITICAL_ERROR)
582                 goto done;
583
584         /*
585          * Flush data buffers.  This can occur asynchronously and at any
586          * time.  We must interlock against the frontend direct-data write
587          * but do not have to acquire the sync-lock yet.
588          */
589         count = 0;
590         while ((io = TAILQ_FIRST(&hmp->data_list)) != NULL) {
591                 if (io->ioerror)
592                         break;
593                 if (io->lock.refs == 0)
594                         ++hammer_count_refedbufs;
595                 hammer_ref(&io->lock);
596                 hammer_io_write_interlock(io);
597                 KKASSERT(io->type != HAMMER_STRUCTURE_VOLUME);
598                 hammer_io_flush(io);
599                 hammer_io_done_interlock(io);
600                 hammer_rel_buffer((hammer_buffer_t)io, 0);
601                 ++count;
602         }
603
604         /*
605          * The sync-lock is required for the remaining sequence.  This lock
606          * prevents meta-data from being modified.
607          */
608         hammer_sync_lock_ex(trans);
609
610         /*
611          * If we have been asked to finalize the volume header sync the
612          * cached blockmap to the on-disk blockmap.  Generate an UNDO
613          * record for the update.
614          */
615         if (final) {
616                 cundomap = &hmp->blockmap[0];
617                 dundomap = &root_volume->ondisk->vol0_blockmap[0];
618                 if (root_volume->io.modified) {
619                         hammer_modify_volume(trans, root_volume,
620                                              dundomap, sizeof(hmp->blockmap));
621                         for (i = 0; i < HAMMER_MAX_ZONES; ++i)
622                                 hammer_crc_set_blockmap(&cundomap[i]);
623                         bcopy(cundomap, dundomap, sizeof(hmp->blockmap));
624                         hammer_modify_volume_done(root_volume);
625                 }
626         }
627
628         /*
629          * Flush UNDOs
630          */
631         count = 0;
632         while ((io = TAILQ_FIRST(&hmp->undo_list)) != NULL) {
633                 if (io->ioerror)
634                         break;
635                 KKASSERT(io->modify_refs == 0);
636                 if (io->lock.refs == 0)
637                         ++hammer_count_refedbufs;
638                 hammer_ref(&io->lock);
639                 KKASSERT(io->type != HAMMER_STRUCTURE_VOLUME);
640                 hammer_io_flush(io);
641                 hammer_rel_buffer((hammer_buffer_t)io, 0);
642                 ++count;
643         }
644
645         /*
646          * Wait for I/Os to complete
647          */
648         hammer_flusher_clean_loose_ios(hmp);
649         hammer_io_wait_all(hmp, "hmrfl1");
650
651         if (hmp->flags & HAMMER_MOUNT_CRITICAL_ERROR)
652                 goto failed;
653
654         /*
655          * Update the on-disk volume header with new UNDO FIFO end position
656          * (do not generate new UNDO records for this change).  We have to
657          * do this for the UNDO FIFO whether (final) is set or not.
658          *
659          * Also update the on-disk next_tid field.  This does not require
660          * an UNDO.  However, because our TID is generated before we get
661          * the sync lock another sync may have beat us to the punch.
662          *
663          * This also has the side effect of updating first_offset based on
664          * a prior finalization when the first finalization of the next flush
665          * cycle occurs, removing any undo info from the prior finalization
666          * from consideration.
667          *
668          * The volume header will be flushed out synchronously.
669          */
670         dundomap = &root_volume->ondisk->vol0_blockmap[HAMMER_ZONE_UNDO_INDEX];
671         cundomap = &hmp->blockmap[HAMMER_ZONE_UNDO_INDEX];
672
673         if (dundomap->first_offset != cundomap->first_offset ||
674                    dundomap->next_offset != cundomap->next_offset) {
675                 hammer_modify_volume(NULL, root_volume, NULL, 0);
676                 dundomap->first_offset = cundomap->first_offset;
677                 dundomap->next_offset = cundomap->next_offset;
678                 hammer_crc_set_blockmap(dundomap);
679                 hammer_modify_volume_done(root_volume);
680         }
681
682         /*
683          * vol0_next_tid is used for TID selection and is updated without
684          * an UNDO so we do not reuse a TID that may have been rolled-back.
685          *
686          * vol0_last_tid is the highest fully-synchronized TID.  It is
687          * set-up when the UNDO fifo is fully synced, later on (not here).
688          */
689         if (root_volume->io.modified) {
690                 hammer_modify_volume(NULL, root_volume, NULL, 0);
691                 if (root_volume->ondisk->vol0_next_tid < trans->tid)
692                         root_volume->ondisk->vol0_next_tid = trans->tid;
693                 hammer_crc_set_volume(root_volume->ondisk);
694                 hammer_modify_volume_done(root_volume);
695                 hammer_io_flush(&root_volume->io);
696         }
697
698         /*
699          * Wait for I/Os to complete
700          */
701         hammer_flusher_clean_loose_ios(hmp);
702         hammer_io_wait_all(hmp, "hmrfl2");
703
704         if (hmp->flags & HAMMER_MOUNT_CRITICAL_ERROR)
705                 goto failed;
706
707         /*
708          * Flush meta-data.  The meta-data will be undone if we crash
709          * so we can safely flush it asynchronously.
710          *
711          * Repeated catchups will wind up flushing this update's meta-data
712          * and the UNDO buffers for the next update simultaniously.  This
713          * is ok.
714          */
715         count = 0;
716         while ((io = TAILQ_FIRST(&hmp->meta_list)) != NULL) {
717                 if (io->ioerror)
718                         break;
719                 KKASSERT(io->modify_refs == 0);
720                 if (io->lock.refs == 0)
721                         ++hammer_count_refedbufs;
722                 hammer_ref(&io->lock);
723                 KKASSERT(io->type != HAMMER_STRUCTURE_VOLUME);
724                 hammer_io_flush(io);
725                 hammer_rel_buffer((hammer_buffer_t)io, 0);
726                 ++count;
727         }
728
729         /*
730          * If this is the final finalization for the flush group set
731          * up for the next sequence by setting a new first_offset in
732          * our cached blockmap and clearing the undo history.
733          *
734          * Even though we have updated our cached first_offset, the on-disk
735          * first_offset still governs available-undo-space calculations.
736          */
737         if (final) {
738                 cundomap = &hmp->blockmap[HAMMER_ZONE_UNDO_INDEX];
739                 if (cundomap->first_offset == cundomap->next_offset) {
740                         hmp->hflags &= ~HMNT_UNDO_DIRTY;
741                 } else {
742                         cundomap->first_offset = cundomap->next_offset;
743                         hmp->hflags |= HMNT_UNDO_DIRTY;
744                 }
745                 hammer_clear_undo_history(hmp);
746
747                 /*
748                  * Flush tid sequencing.  flush_tid1 is fully synchronized,
749                  * meaning a crash will not roll it back.  flush_tid2 has
750                  * been written out asynchronously and a crash will roll
751                  * it back.  flush_tid1 is used for all mirroring masters.
752                  */
753                 if (hmp->flush_tid1 != hmp->flush_tid2) {
754                         hmp->flush_tid1 = hmp->flush_tid2;
755                         wakeup(&hmp->flush_tid1);
756                 }
757                 hmp->flush_tid2 = trans->tid;
758         }
759
760         /*
761          * Cleanup.  Report any critical errors.
762          */
763 failed:
764         hammer_sync_unlock(trans);
765
766         if (hmp->flags & HAMMER_MOUNT_CRITICAL_ERROR) {
767                 kprintf("HAMMER(%s): Critical write error during flush, "
768                         "refusing to sync UNDO FIFO\n",
769                         root_volume->ondisk->vol_name);
770         }
771
772 done:
773         hammer_unlock(&hmp->flusher.finalize_lock);
774
775         if (--hmp->flusher.finalize_want == 0)
776                 wakeup(&hmp->flusher.finalize_want);
777         hammer_stats_commits += final;
778 }
779
780 /*
781  * Return non-zero if too many dirty meta-data buffers have built up.
782  *
783  * Since we cannot allow such buffers to flush until we have dealt with
784  * the UNDOs, we risk deadlocking the kernel's buffer cache.
785  */
786 int
787 hammer_flusher_meta_limit(hammer_mount_t hmp)
788 {
789         if (hmp->locked_dirty_space + hmp->io_running_space >
790             hammer_limit_dirtybufspace) {
791                 return(1);
792         }
793         return(0);
794 }
795
796 /*
797  * Return non-zero if too many dirty meta-data buffers have built up.
798  *
799  * This version is used by background operations (mirror, prune, reblock)
800  * to leave room for foreground operations.
801  */
802 int
803 hammer_flusher_meta_halflimit(hammer_mount_t hmp)
804 {
805         if (hmp->locked_dirty_space + hmp->io_running_space >
806             hammer_limit_dirtybufspace / 2) {
807                 return(1);
808         }
809         return(0);
810 }
811
812 /*
813  * Return non-zero if the flusher still has something to flush.
814  */
815 int
816 hammer_flusher_haswork(hammer_mount_t hmp)
817 {
818         if (hmp->flags & HAMMER_MOUNT_CRITICAL_ERROR)
819                 return(0);
820         if (TAILQ_FIRST(&hmp->flush_group_list) ||      /* dirty inodes */
821             TAILQ_FIRST(&hmp->volu_list) ||             /* dirty bufffers */
822             TAILQ_FIRST(&hmp->undo_list) ||
823             TAILQ_FIRST(&hmp->data_list) ||
824             TAILQ_FIRST(&hmp->meta_list) ||
825             (hmp->hflags & HMNT_UNDO_DIRTY)             /* UNDO FIFO sync */
826         ) {
827                 return(1);
828         }
829         return(0);
830 }
831