2 # GENERIC -- Generic kernel configuration file for DragonFly/i386
4 # Check the LINT configuration file in sys/config, for an
5 # exhaustive list of options.
7 # $DragonFly: src/sys/config/GENERIC,v 1.60 2008/07/26 14:26:30 sephe Exp $
18 makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols
20 options MATH_EMULATE #Support for x87 emulation
21 options INET #InterNETworking
22 options INET6 #IPv6 communications protocols
23 options HAMMER #Hammer Filesystem
24 options NULLFS #NULL filesystem
25 options FFS #Berkeley Fast Filesystem
26 options FFS_ROOT #FFS usable as root device [keep this!]
27 options SOFTUPDATES #Enable FFS soft updates support
28 options UFS_DIRHASH #Improve performance on big directories
29 options MFS #Memory Filesystem
30 options TMPFS #Temporary Filesystem
31 options MD_ROOT #MD is a potential root device
32 options NFS #Network Filesystem
33 options NFS_ROOT #NFS usable as root device, NFS required
34 options MSDOSFS #MSDOS Filesystem
35 options CD9660 #ISO 9660 Filesystem
36 options PROCFS #Process filesystem
37 options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!]
38 options COMPAT_DF12 #Compatible with DragonFly 1.2 and earlier
39 options SCSI_DELAY=5000 #Delay (in ms) before probing SCSI
40 options DEVICE_POLLING # Support mixed interrupt-polling
41 # handling of network device drivers
42 options UCONSOLE #Allow users to grab the console
43 options USERCONFIG #boot -c editor
44 options VISUAL_USERCONFIG #visual boot -c editor
45 options KTRACE #ktrace(1) support
46 options SYSVSHM #SYSV-style shared memory
47 options SYSVMSG #SYSV-style message queues
48 options SYSVSEM #SYSV-style semaphores
49 options P1003_1B #Posix P1003_1B real-time extensions
50 options _KPOSIX_PRIORITY_SCHEDULING
51 options ICMP_BANDLIM #Rate limit bad replies
52 options KBD_INSTALL_CDEV # install a CDEV entry in /dev
53 options AHC_REG_PRETTY_PRINT # Print register bitfields in debug
54 # output. Adds ~128k to driver.
55 options AHD_REG_PRETTY_PRINT # Print register bitfields in debug
56 # output. Adds ~215k to driver.
59 options ALTQ #alternate queueing
60 options ALTQ_CBQ #class based queueing
61 options ALTQ_RED #random early detection
62 options ALTQ_RIO #triple red for diffserv (needs RED)
63 options ALTQ_HFSC #hierarchical fair service curve
64 options ALTQ_PRIQ #priority queue
65 options ALTQ_FAIRQ #fair queueing
66 #options ALTQ_NOPCC #don't use processor cycle counter
67 #options ALTQ_DEBUG #for debugging
69 # To make an SMP kernel both SMP and APIC_IO are usually
70 # specified. SMP boxes with severely broken BIOSes which
71 # boot fine for non-SMP builds *might* work in SMP mode
72 # if you define SMP and leave APIC_IO turned off.
74 #options SMP # Symmetric MultiProcessor Kernel
75 #options APIC_IO # Symmetric (APIC) I/O
77 # Debugging for Development
87 device fdc0 at isa? port IO_FD1 irq 6 drq 2
88 device fd0 at fdc0 drive 0
89 device fd1 at fdc0 drive 1
91 # If you have a Toshiba Libretto with its Y-E Data PCMCIA floppy,
92 # don't use the above line for fdc0 but the following one:
95 # AHCI driver, this will override NATA for AHCI devices,
96 # both drivers may be included.
100 # SiI3124/3132 driver
104 # NEW-ATA (NATA) and ATAPI devices
107 device natadisk # ATA disk drives
108 device natapicd # ATAPI CDROM drives
109 device natapifd # ATAPI floppy drives
110 device natapist # ATAPI tape drives
111 device natapicam # Emulate ATAPI devices as SCSI
112 device nataraid # support for ATA software RAID
114 device natausb # ATA-over-USB support
115 options ATA_STATIC_ID # Static device numbering
117 # LEGACY ATA and ATAPI devices
118 #device ata0 at isa? port IO_WD1 irq 14
119 #device ata1 at isa? port IO_WD2 irq 15
121 #device atadisk # ATA disk drives
122 #device atapicd # ATAPI CDROM drives
123 #device atapifd # ATAPI floppy drives
124 #device atapist # ATAPI tape drives
125 #device atapicam # Emulate ATAPI devices as SCSI via CAM
126 #options ATA_STATIC_ID #Static device numbering
129 device ahb # EISA AHA1742 family
130 device ahc # AHA2940 and onboard AIC7xxx devices
131 device ahd # AHA39320/29320 and onboard AIC79xx devices
132 device amd # AMD 53C974 (Tekram DC-390(T))
133 device isp # Qlogic family
134 device mpt # LSI-Logic MPT/Fusion
135 device ncr # NCR/Symbios Logic
136 device sym # NCR/Symbios Logic (newer chipsets)
137 options SYM_SETUP_LP_PROBE_MAP=0x40
138 # Allow ncr to attach legacy NCR devices when
139 # both sym and ncr are configured
147 device ncv # NCR 53C500
148 device nsp # Workbit Ninja SCSI-3
149 device stg # TMC 18C30/18C50
152 device scbus # SCSI bus (required)
153 device da # Direct Access (disks)
154 device sa # Sequential Access (tape etc)
156 device pass # Passthrough device (direct SCSI access)
157 device sg # Passthrough device (linux scsi generic)
159 # RAID controllers interfaced to the SCSI subsystem
160 device asr # DPT SmartRAID V, VI and Adaptec SCSI RAID
161 device dpt # DPT Smartcache - See LINT for options!
162 device iir # Intel Integrated RAID
163 device mly # Mylex AcceleRAID/eXtremeRAID
164 device ciss # Compaq SmartRAID 5* series
167 device aac # Adaptec FSA RAID, Dell PERC2/PERC3
168 #device aacp # SCSI passthrough for aac (requires CAM)
169 device ida # Compaq Smart RAID
170 device ips # IBM ServeRAID
171 device amr # AMI MegaRAID
172 device mlx # Mylex DAC960 family
173 device twe # 3ware Escalade 7000/8000's
174 device twa # 3ware 9000 series PATA/SATA RAID
175 device pst # Promise Supertrack
177 # atkbdc0 controls both the keyboard and the PS/2 mouse
178 device atkbdc0 at isa? port IO_KBD
179 device atkbd0 at atkbdc? irq 1 flags 0x1
180 device psm0 at atkbdc? irq 12
184 # kbdmux is the keyboard multiplexer
187 # splash screen/screen saver
190 # syscons is the default console driver, resembling an SCO console
191 device sc0 at isa? flags 0x100
192 options SC_PIXEL_MODE # add support for the raster text mode
194 device agp # support several AGP chipsets
196 # Floating point support - do not disable.
197 device npx0 at nexus? port IO_NPX irq 13
199 # Power management support (see LINT for more options)
200 device apm0 at nexus? disable flags 0x20 # Advanced Power Management
202 # HW monitoring devices
203 device aps0 at isa? port 0x1600
204 device lm0 at isa? port 0x290
205 device it0 at isa? port 0x290
206 device it1 at isa? port 0xc00
207 device it2 at isa? port 0xd00
208 device it3 at isa? port 0x228
209 device wbsio0 at isa? port 0x2e
210 device wbsio1 at isa? port 0x4e
211 device lm#3 at wbsio?
213 # PCCARD (PCMCIA) support
219 device sio0 at isa? port IO_COM1 flags 0x10 irq 4
220 device sio1 at isa? port IO_COM2 irq 3
221 device sio2 at isa? disable port IO_COM3 irq 5
222 device sio3 at isa? disable port IO_COM4 irq 9
225 device ppc0 at isa? irq 7
226 device ppbus # Parallel port bus (required)
228 device plip # TCP/IP over parallel
229 device ppi # Parallel port interface device
230 #device vpo # Requires scbus and da
233 device de # DEC/Intel DC21x4x (``Tulip'')
234 device txp # 3Com 3cR990 (``Typhoon'')
235 device vx # 3Com 3c590, 3c595 (``Vortex'')
237 device em # Intel PRO/1000 adapter Gigabit Ethernet Card (``Wiseman'')
239 device ig_hal # Intel PRO/1000 hardware abstraction layer
241 # PCI Ethernet NICs that use the common MII bus controller code.
242 # NOTE: Be sure to keep the 'device miibus' line in order to use these NICs!
243 device miibus # MII bus support
244 device ae # Attansic/Atheros L2 Fast Ethernet
245 device age # Attansic/Atheros L1 Gigabit Ethernet
246 device alc # Atheros AR8131/AR8132
247 device ale # Atheros AR8121/AR8113/AR8114
248 device bce # Broadcom NetXtreme II Gigabit Ethernet
249 device bfe # Broadcom BCM440x 10/100 Ethernet
250 device dc # DEC/Intel 21143 and various workalikes
251 device et # Agere ET1310 10/100/1000 Ethernet
252 device fxp # Intel EtherExpress PRO/100B (82557, 82558)
253 device jme # JMicron Gigabit/Fast Ethernet
254 device pcn # AMD Am79C97x PCI 10/100 NICs
255 device rl # RealTek 8129/8139
256 device re # RealTek 8139C+/8169
257 device sf # Adaptec AIC-6915 (``Starfire'')
258 device sis # Silicon Integrated Systems SiS 900/SiS 7016
259 device sk # SysKonnect GEnesis, LinkSys EG1023, D-Link
260 device ste # Sundance ST201 (D-Link DFE-550TX)
261 device tl # Texas Instruments ThunderLAN
262 device tx # SMC EtherPower II (83c170 ``EPIC'')
263 device vge # VIA 612x GigE
264 device vr # VIA Rhine, Rhine II
265 device wb # Winbond W89C840F
266 device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'')
267 device bge # Broadcom BCM570x (``Tigon III'')
268 device stge # Sundance/Tamarack TC9021 Gigabit Ethernet
269 device msk # Marvell/SysKonnect Yukon II Gigabit Ethernet
270 device nfe # NVIDIA nForce MCP 10/100/Gigabit Ethernet
273 # 'device ed' requires 'device miibus'
274 device ed0 at isa? disable port 0x280 irq 10 iomem 0xd8000
277 device fe0 at isa? disable port 0x300
282 options IEEE80211_DEBUG #enable debugging msgs
283 options IEEE80211_SUPPORT_MESH #enable 802.11s D3.0 support
284 options IEEE80211_SUPPORT_TDMA #enable TDMA support
285 device wlan # 802.11 support
286 device wlan_ccmp # 802.11 CCMP support
287 device wlan_tkip # 802.11 TKIP support
288 device wlan_wep # 802.11 WEP support
289 #device wlan_amrr # AMRR
291 # All wireless NICs require wlan and wlan_amrr
292 # Aironet 4500/4800 802.11 wireless NICs. Note: the declaration below will
293 # work for PCMCIA and PCI cards, as well as ISA cards set to ISA PnP
294 # mode (the factory default). If you set the switches on your ISA
295 # card for a manually chosen I/O address and IRQ, you must specify
296 # those parameters here.
298 device ral # Ralink Technology 802.11 wireless NIC
299 #device rtw # RealTek 802.11 wireless NIC
300 # WaveLAN/IEEE 802.11 wireless NICs. Note: the WaveLAN/IEEE really
301 # exists only as a PCMCIA device, so there is no ISA attachment needed
302 # and resources will always be dynamically assigned by the pccard code.
305 # The probe order of these is presently determined by i386/isa/isa_compat.c.
306 device ie0 at isa? disable port 0x300 irq 10 iomem 0xd0000
307 #device le0 at isa? disable port 0x300 irq 5 iomem 0xd0000
308 device lnc0 at isa? disable port 0x280 irq 10 drq 0
309 device cs0 at isa? disable port 0x300
310 device sn0 at isa? disable port 0x300 irq 10
312 # Pseudo devices - the number indicates how many units to allocate.
313 pseudo-device loop # Network loopback
314 pseudo-device ether # Ethernet support
315 pseudo-device sl 1 # Kernel SLIP
316 pseudo-device ppp 1 # Kernel PPP
317 pseudo-device tun # Packet tunnel.
318 pseudo-device pty # Pseudo-ttys (telnet etc)
319 pseudo-device md # Memory "disks"
320 pseudo-device gif # IPv6 and IPv4 tunneling
321 pseudo-device faith 1 # IPv6-to-IPv4 relaying (translation)
323 # The `bpf' pseudo-device enables the Berkeley Packet Filter.
324 # Be aware of the administrative consequences of enabling this!
325 pseudo-device bpf #Berkeley packet filter
327 pseudo-device crypto # core crypto support, used by wlan
328 pseudo-device cryptodev
331 device uhci # UHCI PCI->USB interface
332 device ohci # OHCI PCI->USB interface
333 device usb # USB Bus (required)
334 device ugen # Generic
335 device uhid # "Human Interface Devices"
336 device ukbd # Keyboard
337 device ulpt # Printer
338 device umass # Disks/Mass storage - Requires scbus and da
340 device uscanner # Scanners
341 device urio # Diamond Rio MP3 Player
342 # USB Ethernet, requires mii
343 device aue # ADMtek USB ethernet
344 device axe # ASIX Electronics USB Ethernet
345 device cue # CATC USB ethernet
346 device kue # Kawasaki LSI USB ethernet
347 device rue # RealTek 8150 based USB ethernet
348 # USB wireless NICs, requires wlan, wlan_amrr
349 #device rum # Ralink Technology RT2501USB/RT2601USB
350 #device ural # Ralink Technology RT2500USB
353 device firewire # FireWire bus code
354 device sbp # SCSI over FireWire (Requires scbus and da)
355 device fwe # Ethernet over FireWire (non-standard!)