80211 - Update up to FreeBSD's r287029 (only skipping a few minor changes)
[dragonfly.git] / sys / netproto / 802_11 / wlan / ieee80211_scan.c
1 /*-
2  * Copyright (c) 2002-2008 Sam Leffler, Errno Consulting
3  * All rights reserved.
4  *
5  * Redistribution and use in source and binary forms, with or without
6  * modification, are permitted provided that the following conditions
7  * are met:
8  * 1. Redistributions of source code must retain the above copyright
9  *    notice, this list of conditions and the following disclaimer.
10  * 2. Redistributions in binary form must reproduce the above copyright
11  *    notice, this list of conditions and the following disclaimer in the
12  *    documentation and/or other materials provided with the distribution.
13  *
14  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
15  * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
16  * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
17  * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
18  * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
19  * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
20  * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
21  * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
22  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
23  * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
24  */
25
26 #include <sys/cdefs.h>
27 __FBSDID("$FreeBSD$");
28
29 /*
30  * IEEE 802.11 scanning support.
31  */
32 #include "opt_wlan.h"
33
34 #include <sys/param.h>
35 #include <sys/systm.h> 
36 #include <sys/proc.h>
37 #include <sys/kernel.h>
38 #include <sys/condvar.h>
39
40 #include <sys/socket.h>
41
42 #include <net/if.h>
43 #include <net/if_var.h>
44 #include <net/if_media.h>
45 #include <net/ethernet.h>
46
47 #include <netproto/802_11/ieee80211_var.h>
48
49 /* XXX until it's implemented as attach ops */
50 #include <netproto/802_11/ieee80211_scan_sw.h>
51
52 #include <net/bpf.h>
53
54 /*
55  * Roaming-related defaults.  RSSI thresholds are as returned by the
56  * driver (.5dBm).  Transmit rate thresholds are IEEE rate codes (i.e
57  * .5M units) or MCS.
58  */
59 /* rssi thresholds */
60 #define ROAM_RSSI_11A_DEFAULT           14      /* 11a bss */
61 #define ROAM_RSSI_11B_DEFAULT           14      /* 11b bss */
62 #define ROAM_RSSI_11BONLY_DEFAULT       14      /* 11b-only bss */
63 /* transmit rate thresholds */
64 #define ROAM_RATE_11A_DEFAULT           2*12    /* 11a bss */
65 #define ROAM_RATE_11B_DEFAULT           2*5     /* 11b bss */
66 #define ROAM_RATE_11BONLY_DEFAULT       2*1     /* 11b-only bss */
67 #define ROAM_RATE_HALF_DEFAULT          2*6     /* half-width 11a/g bss */
68 #define ROAM_RATE_QUARTER_DEFAULT       2*3     /* quarter-width 11a/g bss */
69 #define ROAM_MCS_11N_DEFAULT            (1 | IEEE80211_RATE_MCS) /* 11n bss */
70
71 void
72 ieee80211_scan_attach(struct ieee80211com *ic)
73 {
74
75         /*
76          * If there's no scan method pointer, attach the
77          * swscan set as a default.
78          */
79         if (ic->ic_scan_methods == NULL)
80                 ieee80211_swscan_attach(ic);
81         else
82                 ic->ic_scan_methods->sc_attach(ic);
83 }
84
85 void
86 ieee80211_scan_detach(struct ieee80211com *ic)
87 {
88
89         /*
90          * Ideally we'd do the ss_ops detach call here;
91          * but then sc_detach() would need to be split in two.
92          *
93          * I'll do that later.
94          */
95         ic->ic_scan_methods->sc_detach(ic);
96 }
97
98 static const struct ieee80211_roamparam defroam[IEEE80211_MODE_MAX] = {
99         [IEEE80211_MODE_11A]    = { .rssi = ROAM_RSSI_11A_DEFAULT,
100                                     .rate = ROAM_RATE_11A_DEFAULT },
101         [IEEE80211_MODE_11G]    = { .rssi = ROAM_RSSI_11B_DEFAULT,
102                                     .rate = ROAM_RATE_11B_DEFAULT },
103         [IEEE80211_MODE_11B]    = { .rssi = ROAM_RSSI_11BONLY_DEFAULT,
104                                     .rate = ROAM_RATE_11BONLY_DEFAULT },
105         [IEEE80211_MODE_TURBO_A]= { .rssi = ROAM_RSSI_11A_DEFAULT,
106                                     .rate = ROAM_RATE_11A_DEFAULT },
107         [IEEE80211_MODE_TURBO_G]= { .rssi = ROAM_RSSI_11A_DEFAULT,
108                                     .rate = ROAM_RATE_11A_DEFAULT },
109         [IEEE80211_MODE_STURBO_A]={ .rssi = ROAM_RSSI_11A_DEFAULT,
110                                     .rate = ROAM_RATE_11A_DEFAULT },
111         [IEEE80211_MODE_HALF]   = { .rssi = ROAM_RSSI_11A_DEFAULT,
112                                     .rate = ROAM_RATE_HALF_DEFAULT },
113         [IEEE80211_MODE_QUARTER]= { .rssi = ROAM_RSSI_11A_DEFAULT,
114                                     .rate = ROAM_RATE_QUARTER_DEFAULT },
115         [IEEE80211_MODE_11NA]   = { .rssi = ROAM_RSSI_11A_DEFAULT,
116                                     .rate = ROAM_MCS_11N_DEFAULT },
117         [IEEE80211_MODE_11NG]   = { .rssi = ROAM_RSSI_11B_DEFAULT,
118                                     .rate = ROAM_MCS_11N_DEFAULT },
119 };
120
121 void
122 ieee80211_scan_vattach(struct ieee80211vap *vap)
123 {
124         struct ieee80211com *ic = vap->iv_ic;
125         vap->iv_bgscanidle = (IEEE80211_BGSCAN_IDLE_DEFAULT*1000)/hz;
126         vap->iv_bgscanintvl = IEEE80211_BGSCAN_INTVAL_DEFAULT*hz;
127         vap->iv_scanvalid = IEEE80211_SCAN_VALID_DEFAULT*hz;
128
129         vap->iv_roaming = IEEE80211_ROAMING_AUTO;
130         memcpy(vap->iv_roamparms, defroam, sizeof(defroam));
131
132         ic->ic_scan_methods->sc_vattach(vap);
133 }
134
135 void
136 ieee80211_scan_vdetach(struct ieee80211vap *vap)
137 {
138         struct ieee80211com *ic = vap->iv_ic;
139         struct ieee80211_scan_state *ss;
140
141         IEEE80211_LOCK(ic);
142         ss = ic->ic_scan;
143
144         ic->ic_scan_methods->sc_vdetach(vap);
145
146         if (ss != NULL && ss->ss_vap == vap) {
147                 if (ss->ss_ops != NULL) {
148                         ss->ss_ops->scan_detach(ss);
149                         ss->ss_ops = NULL;
150                 }
151                 ss->ss_vap = NULL;
152         }
153         IEEE80211_UNLOCK(ic);
154 }
155
156 /*
157  * Simple-minded scanner module support.
158  */
159 static const char *scan_modnames[IEEE80211_OPMODE_MAX] = {
160         "wlan_scan_sta",        /* IEEE80211_M_IBSS */
161         "wlan_scan_sta",        /* IEEE80211_M_STA */
162         "wlan_scan_wds",        /* IEEE80211_M_WDS */
163         "wlan_scan_sta",        /* IEEE80211_M_AHDEMO */
164         "wlan_scan_ap",         /* IEEE80211_M_HOSTAP */
165         "wlan_scan_monitor",    /* IEEE80211_M_MONITOR */
166         "wlan_scan_sta",        /* IEEE80211_M_MBSS */
167 };
168 static const struct ieee80211_scanner *scanners[IEEE80211_OPMODE_MAX];
169
170 const struct ieee80211_scanner *
171 ieee80211_scanner_get(enum ieee80211_opmode mode)
172 {
173         if (mode >= IEEE80211_OPMODE_MAX)
174                 return NULL;
175         if (scanners[mode] == NULL)
176                 ieee80211_load_module(scan_modnames[mode]);
177         return scanners[mode];
178 }
179
180 void
181 ieee80211_scanner_register(enum ieee80211_opmode mode,
182         const struct ieee80211_scanner *scan)
183 {
184         if (mode >= IEEE80211_OPMODE_MAX)
185                 return;
186         scanners[mode] = scan;
187 }
188
189 void
190 ieee80211_scanner_unregister(enum ieee80211_opmode mode,
191         const struct ieee80211_scanner *scan)
192 {
193         if (mode >= IEEE80211_OPMODE_MAX)
194                 return;
195         if (scanners[mode] == scan)
196                 scanners[mode] = NULL;
197 }
198
199 void
200 ieee80211_scanner_unregister_all(const struct ieee80211_scanner *scan)
201 {
202         int m;
203
204         for (m = 0; m < IEEE80211_OPMODE_MAX; m++)
205                 if (scanners[m] == scan)
206                         scanners[m] = NULL;
207 }
208
209 /*
210  * Update common scanner state to reflect the current
211  * operating mode.  This is called when the state machine
212  * is transitioned to RUN state w/o scanning--e.g. when
213  * operating in monitor mode.  The purpose of this is to
214  * ensure later callbacks find ss_ops set to properly
215  * reflect current operating mode.
216  */
217 void
218 ieee80211_scan_update_locked(struct ieee80211vap *vap,
219         const struct ieee80211_scanner *scan)
220 {
221         struct ieee80211com *ic = vap->iv_ic;
222         struct ieee80211_scan_state *ss = ic->ic_scan;
223
224         IEEE80211_LOCK_ASSERT(ic);
225
226 #ifdef IEEE80211_DEBUG
227         if (ss->ss_vap != vap || ss->ss_ops != scan) {
228                 IEEE80211_DPRINTF(vap, IEEE80211_MSG_SCAN,
229                     "%s: current scanner is <%s:%s>, switch to <%s:%s>\n",
230                     __func__,
231                     ss->ss_vap != NULL ?
232                         ss->ss_vap->iv_ifp->if_xname : "none",
233                     ss->ss_vap != NULL ?
234                         ieee80211_opmode_name[ss->ss_vap->iv_opmode] : "none",
235                     vap->iv_ifp->if_xname,
236                     ieee80211_opmode_name[vap->iv_opmode]);
237         }
238 #endif
239         ss->ss_vap = vap;
240         if (ss->ss_ops != scan) {
241                 /*
242                  * Switch scanners; detach old, attach new.  Special
243                  * case where a single scan module implements multiple
244                  * policies by using different scan ops but a common
245                  * core.  We assume if the old and new attach methods
246                  * are identical then it's ok to just change ss_ops
247                  * and not flush the internal state of the module.
248                  */
249                 if (scan == NULL || ss->ss_ops == NULL ||
250                     ss->ss_ops->scan_attach != scan->scan_attach) {
251                         if (ss->ss_ops != NULL)
252                                 ss->ss_ops->scan_detach(ss);
253                         if (scan != NULL && !scan->scan_attach(ss)) {
254                                 /* XXX attach failure */
255                                 /* XXX stat+msg */
256                                 scan = NULL;
257                         }
258                 }
259                 ss->ss_ops = scan;
260         }
261 }
262
263 void
264 ieee80211_scan_dump_channels(const struct ieee80211_scan_state *ss)
265 {
266         struct ieee80211com *ic = ss->ss_ic;
267         const char *sep;
268         int i;
269
270         sep = "";
271         for (i = ss->ss_next; i < ss->ss_last; i++) {
272                 const struct ieee80211_channel *c = ss->ss_chans[i];
273
274                 kprintf("%s%u%c", sep, ieee80211_chan2ieee(ic, c),
275                     ieee80211_channel_type_char(c));
276                 sep = ", ";
277         }
278 }
279
280 #ifdef IEEE80211_DEBUG
281 void
282 ieee80211_scan_dump(struct ieee80211_scan_state *ss)
283 {
284         struct ieee80211vap *vap = ss->ss_vap;
285
286         if_printf(vap->iv_ifp, "scan set ");
287         ieee80211_scan_dump_channels(ss);
288         kprintf(" dwell min %lums max %lums\n",
289             ticks_to_msecs(ss->ss_mindwell), ticks_to_msecs(ss->ss_maxdwell));
290 }
291 #endif /* IEEE80211_DEBUG */
292
293 void
294 ieee80211_scan_copy_ssid(struct ieee80211vap *vap, struct ieee80211_scan_state *ss,
295         int nssid, const struct ieee80211_scan_ssid ssids[])
296 {
297         if (nssid > IEEE80211_SCAN_MAX_SSID) {
298                 /* XXX printf */
299                 IEEE80211_DPRINTF(vap, IEEE80211_MSG_SCAN,
300                     "%s: too many ssid %d, ignoring all of them\n",
301                     __func__, nssid);
302                 return;
303         }
304         memcpy(ss->ss_ssid, ssids, nssid * sizeof(ssids[0]));
305         ss->ss_nssid = nssid;
306 }
307
308 /*
309  * Start a scan unless one is already going.
310  */
311 int
312 ieee80211_start_scan(struct ieee80211vap *vap, int flags,
313         u_int duration, u_int mindwell, u_int maxdwell,
314         u_int nssid, const struct ieee80211_scan_ssid ssids[])
315 {
316         const struct ieee80211_scanner *scan;
317         struct ieee80211com *ic = vap->iv_ic;
318
319         scan = ieee80211_scanner_get(vap->iv_opmode);
320         if (scan == NULL) {
321                 IEEE80211_DPRINTF(vap, IEEE80211_MSG_SCAN,
322                     "%s: no scanner support for %s mode\n",
323                     __func__, ieee80211_opmode_name[vap->iv_opmode]);
324                 /* XXX stat */
325                 return 0;
326         }
327
328         return ic->ic_scan_methods->sc_start_scan(scan, vap, flags, duration,
329             mindwell, maxdwell, nssid, ssids);
330 }
331
332 /*
333  * Check the scan cache for an ap/channel to use; if that
334  * fails then kick off a new scan.
335  */
336 int
337 ieee80211_check_scan(struct ieee80211vap *vap, int flags,
338         u_int duration, u_int mindwell, u_int maxdwell,
339         u_int nssid, const struct ieee80211_scan_ssid ssids[])
340 {
341         struct ieee80211com *ic = vap->iv_ic;
342         struct ieee80211_scan_state *ss = ic->ic_scan;
343         const struct ieee80211_scanner *scan;
344         int result;
345
346         scan = ieee80211_scanner_get(vap->iv_opmode);
347         if (scan == NULL) {
348                 IEEE80211_DPRINTF(vap, IEEE80211_MSG_SCAN,
349                     "%s: no scanner support for %d mode\n",
350                     __func__, vap->iv_opmode);
351                 /* XXX stat */
352                 return 0;
353         }
354
355         /*
356          * Check if there's a list of scan candidates already.
357          * XXX want more than the ap we're currently associated with
358          */
359
360         IEEE80211_LOCK(ic);
361         IEEE80211_DPRINTF(vap, IEEE80211_MSG_SCAN,
362             "%s: %s scan, %s%s%s%s%s\n"
363             , __func__
364             , flags & IEEE80211_SCAN_ACTIVE ? "active" : "passive"
365             , flags & IEEE80211_SCAN_FLUSH ? "flush" : "append"
366             , flags & IEEE80211_SCAN_NOPICK ? ", nopick" : ""
367             , flags & IEEE80211_SCAN_NOJOIN ? ", nojoin" : ""
368             , flags & IEEE80211_SCAN_PICK1ST ? ", pick1st" : ""
369             , flags & IEEE80211_SCAN_ONCE ? ", once" : ""
370         );
371
372         if (ss->ss_ops != scan) {
373                 /* XXX re-use cache contents? e.g. adhoc<->sta */
374                 flags |= IEEE80211_SCAN_FLUSH;
375         }
376
377         /*
378          * XXX TODO: separate things out a bit better.
379          */
380         ieee80211_scan_update_locked(vap, scan);
381
382         result = ic->ic_scan_methods->sc_check_scan(scan, vap, flags, duration,
383             mindwell, maxdwell, nssid, ssids);
384
385         IEEE80211_UNLOCK(ic);
386
387         return (result);
388 }
389
390 /*
391  * Check the scan cache for an ap/channel to use; if that fails
392  * then kick off a scan using the current settings.
393  */
394 int
395 ieee80211_check_scan_current(struct ieee80211vap *vap)
396 {
397         return ieee80211_check_scan(vap,
398             IEEE80211_SCAN_ACTIVE,
399             IEEE80211_SCAN_FOREVER, 0, 0,
400             vap->iv_des_nssid, vap->iv_des_ssid);
401 }
402
403 /*
404  * Restart a previous scan.  If the previous scan completed
405  * then we start again using the existing channel list.
406  */
407 int
408 ieee80211_bg_scan(struct ieee80211vap *vap, int flags)
409 {
410         struct ieee80211com *ic = vap->iv_ic;
411         const struct ieee80211_scanner *scan;
412
413         // IEEE80211_UNLOCK_ASSERT(sc);
414
415         scan = ieee80211_scanner_get(vap->iv_opmode);
416         if (scan == NULL) {
417                 IEEE80211_DPRINTF(vap, IEEE80211_MSG_SCAN,
418                     "%s: no scanner support for %d mode\n",
419                     __func__, vap->iv_opmode);
420                 /* XXX stat */
421                 return 0;
422         }
423
424         /*
425          * XXX TODO: pull apart the bgscan logic into whatever
426          * belongs here and whatever belongs in the software
427          * scanner.
428          */
429         return (ic->ic_scan_methods->sc_bg_scan(scan, vap, flags));
430 }
431
432 /*
433  * Cancel any scan currently going on for the specified vap.
434  */
435 void
436 ieee80211_cancel_scan(struct ieee80211vap *vap)
437 {
438         struct ieee80211com *ic = vap->iv_ic;
439
440         ic->ic_scan_methods->sc_cancel_scan(vap);
441 }
442
443 /*
444  * Cancel any scan currently going on.
445  */
446 void
447 ieee80211_cancel_anyscan(struct ieee80211vap *vap)
448 {
449         struct ieee80211com *ic = vap->iv_ic;
450
451         ic->ic_scan_methods->sc_cancel_anyscan(vap);
452 }
453
454 /*
455  * Public access to scan_next for drivers that manage
456  * scanning themselves (e.g. for firmware-based devices).
457  */
458 void
459 ieee80211_scan_next(struct ieee80211vap *vap)
460 {
461         struct ieee80211com *ic = vap->iv_ic;
462
463         ic->ic_scan_methods->sc_scan_next(vap);
464 }
465
466 /*
467  * Public access to scan_next for drivers that are not able to scan single
468  * channels (e.g. for firmware-based devices).
469  */
470 void
471 ieee80211_scan_done(struct ieee80211vap *vap)
472 {
473         struct ieee80211com *ic = vap->iv_ic;
474         struct ieee80211_scan_state *ss;
475
476         IEEE80211_DPRINTF(vap, IEEE80211_MSG_SCAN, "%s: called\n", __func__);
477
478         IEEE80211_LOCK(ic);
479         ss = ic->ic_scan;
480         ss->ss_next = ss->ss_last; /* all channels are complete */
481
482         ic->ic_scan_methods->sc_scan_done(vap);
483
484         IEEE80211_UNLOCK(ic);
485 }
486
487 /*
488  * Probe the curent channel, if allowed, while scanning.
489  * If the channel is not marked passive-only then send
490  * a probe request immediately.  Otherwise mark state and
491  * listen for beacons on the channel; if we receive something
492  * then we'll transmit a probe request.
493  */
494 void
495 ieee80211_probe_curchan(struct ieee80211vap *vap, int force)
496 {
497         struct ieee80211com *ic = vap->iv_ic;
498
499         if ((ic->ic_curchan->ic_flags & IEEE80211_CHAN_PASSIVE) && !force) {
500                 ic->ic_flags_ext |= IEEE80211_FEXT_PROBECHAN;
501                 return;
502         }
503
504         ic->ic_scan_methods->sc_scan_probe_curchan(vap, force);
505 }
506
507 #ifdef IEEE80211_DEBUG
508 static void
509 dump_country(const uint8_t *ie)
510 {
511         const struct ieee80211_country_ie *cie =
512            (const struct ieee80211_country_ie *) ie;
513         int i, nbands, schan, nchan;
514
515         if (cie->len < 3) {
516                 kprintf(" <bogus country ie, len %d>", cie->len);
517                 return;
518         }
519         kprintf(" country [%c%c%c", cie->cc[0], cie->cc[1], cie->cc[2]);
520         nbands = (cie->len - 3) / sizeof(cie->band[0]);
521         for (i = 0; i < nbands; i++) {
522                 schan = cie->band[i].schan;
523                 nchan = cie->band[i].nchan;
524                 if (nchan != 1)
525                         kprintf(" %u-%u,%u", schan, schan + nchan-1,
526                             cie->band[i].maxtxpwr);
527                 else
528                         kprintf(" %u,%u", schan, cie->band[i].maxtxpwr);
529         }
530         kprintf("]");
531 }
532
533 void
534 ieee80211_scan_dump_probe_beacon(uint8_t subtype, int isnew,
535         const uint8_t mac[IEEE80211_ADDR_LEN],
536         const struct ieee80211_scanparams *sp, int rssi)
537 {
538
539         kprintf("[%s] %s%s on chan %u (bss chan %u) ",
540             ether_sprintf(mac), isnew ? "new " : "",
541             ieee80211_mgt_subtype_name[subtype >> IEEE80211_FC0_SUBTYPE_SHIFT],
542             sp->chan, sp->bchan);
543         ieee80211_print_essid(sp->ssid + 2, sp->ssid[1]);
544         kprintf(" rssi %d\n", rssi);
545
546         if (isnew) {
547                 kprintf("[%s] caps 0x%x bintval %u erp 0x%x",
548                         ether_sprintf(mac), sp->capinfo, sp->bintval, sp->erp);
549                 if (sp->country != NULL)
550                         dump_country(sp->country);
551                 kprintf("\n");
552         }
553 }
554 #endif /* IEEE80211_DEBUG */
555
556 /*
557  * Process a beacon or probe response frame.
558  */
559 void
560 ieee80211_add_scan(struct ieee80211vap *vap,
561         struct ieee80211_channel *curchan,
562         const struct ieee80211_scanparams *sp,
563         const struct ieee80211_frame *wh,
564         int subtype, int rssi, int noise)
565 {
566         struct ieee80211com *ic = vap->iv_ic;
567
568         return (ic->ic_scan_methods->sc_add_scan(vap, curchan, sp, wh, subtype,
569             rssi, noise));
570 }
571
572 /*
573  * Timeout/age scan cache entries; called from sta timeout
574  * timer (XXX should be self-contained).
575  */
576 void
577 ieee80211_scan_timeout(struct ieee80211com *ic)
578 {
579         struct ieee80211_scan_state *ss = ic->ic_scan;
580
581         if (ss->ss_ops != NULL)
582                 ss->ss_ops->scan_age(ss);
583 }
584
585 /*
586  * Mark a scan cache entry after a successful associate.
587  */
588 void
589 ieee80211_scan_assoc_success(struct ieee80211vap *vap, const uint8_t mac[])
590 {
591         struct ieee80211_scan_state *ss = vap->iv_ic->ic_scan;
592
593         if (ss->ss_ops != NULL) {
594                 IEEE80211_NOTE_MAC(vap, IEEE80211_MSG_SCAN,
595                         mac, "%s",  __func__);
596                 ss->ss_ops->scan_assoc_success(ss, mac);
597         }
598 }
599
600 /*
601  * Demerit a scan cache entry after failing to associate.
602  */
603 void
604 ieee80211_scan_assoc_fail(struct ieee80211vap *vap,
605         const uint8_t mac[], int reason)
606 {
607         struct ieee80211_scan_state *ss = vap->iv_ic->ic_scan;
608
609         if (ss->ss_ops != NULL) {
610                 IEEE80211_NOTE_MAC(vap, IEEE80211_MSG_SCAN, mac,
611                         "%s: reason %u", __func__, reason);
612                 ss->ss_ops->scan_assoc_fail(ss, mac, reason);
613         }
614 }
615
616 /*
617  * Iterate over the contents of the scan cache.
618  */
619 void
620 ieee80211_scan_iterate(struct ieee80211vap *vap,
621         ieee80211_scan_iter_func *f, void *arg)
622 {
623         struct ieee80211_scan_state *ss = vap->iv_ic->ic_scan;
624
625         if (ss->ss_ops != NULL)
626                 ss->ss_ops->scan_iterate(ss, f, arg);
627 }
628
629 /*
630  * Flush the contents of the scan cache.
631  */
632 void
633 ieee80211_scan_flush(struct ieee80211vap *vap)
634 {
635         struct ieee80211_scan_state *ss = vap->iv_ic->ic_scan;
636
637         if (ss->ss_ops != NULL && ss->ss_vap == vap) {
638                 IEEE80211_DPRINTF(vap, IEEE80211_MSG_SCAN, "%s\n",  __func__);
639                 ss->ss_ops->scan_flush(ss);
640         }
641 }
642
643 /*
644  * Check the scan cache for an ap/channel to use; if that
645  * fails then kick off a new scan.
646  */
647 struct ieee80211_channel *
648 ieee80211_scan_pickchannel(struct ieee80211com *ic, int flags)
649 {
650         struct ieee80211_scan_state *ss = ic->ic_scan;
651
652         IEEE80211_LOCK_ASSERT(ic);
653
654         if (ss == NULL || ss->ss_ops == NULL || ss->ss_vap == NULL) {
655                 /* XXX printf? */
656                 return NULL;
657         }
658         if (ss->ss_ops->scan_pickchan == NULL) {
659                 IEEE80211_DPRINTF(ss->ss_vap, IEEE80211_MSG_SCAN,
660                     "%s: scan module does not support picking a channel, "
661                     "opmode %d\n", __func__, ss->ss_vap->iv_opmode);
662                 return NULL;
663         }
664         return ss->ss_ops->scan_pickchan(ss, flags);
665 }