2 # GENERIC -- Generic kernel configuration file for DragonFly/i386
4 # Check the LINT configuration file in sys/config, for an
5 # exhaustive list of options.
7 # $DragonFly: src/nrelease/gui/root/DFLYLIVE-SMP-NOAPIC,v 1.1 2008/09/01 21:20:30 swildner Exp $
15 ident DFLYLIVE-SMP-NOAPIC
18 makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols
20 options MATH_EMULATE #Support for x87 emulation
21 options INET #InterNETworking
22 options INET6 #IPv6 communications protocols
23 options HAMMER #Hammer Filesystem
24 options FFS #Berkeley Fast Filesystem
25 options FFS_ROOT #FFS usable as root device [keep this!]
26 options SOFTUPDATES #Enable FFS soft updates support
27 options UFS_DIRHASH #Improve performance on big directories
28 options MFS #Memory Filesystem
29 options MD_ROOT #MD is a potential root device
30 options NFS #Network Filesystem
31 options NFS_ROOT #NFS usable as root device, NFS required
32 options MSDOSFS #MSDOS Filesystem
33 options CD9660 #ISO 9660 Filesystem
34 options PROCFS #Process filesystem
35 options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!]
36 options COMPAT_DF12 #Compatible with DragonFly 1.2 and earlier
37 options SCSI_DELAY=5000 #Delay (in ms) before probing SCSI
38 options DEVICE_POLLING # Support mixed interrupt-polling
39 # handling of network device drivers
40 options UCONSOLE #Allow users to grab the console
41 options USERCONFIG #boot -c editor
42 options VISUAL_USERCONFIG #visual boot -c editor
43 options KTRACE #ktrace(1) support
44 options SYSVSHM #SYSV-style shared memory
45 options SYSVMSG #SYSV-style message queues
46 options SYSVSEM #SYSV-style semaphores
47 options P1003_1B #Posix P1003_1B real-time extensions
48 options _KPOSIX_PRIORITY_SCHEDULING
49 options ICMP_BANDLIM #Rate limit bad replies
50 options KBD_INSTALL_CDEV # install a CDEV entry in /dev
51 options AHC_REG_PRETTY_PRINT # Print register bitfields in debug
52 # output. Adds ~128k to driver.
53 options AHD_REG_PRETTY_PRINT # Print register bitfields in debug
54 # output. Adds ~215k to driver.
56 # To make an SMP kernel both SMP and APIC_IO are usually
57 # specified. SMP boxes with severely broken BIOSes which
58 # boot fine for non-SMP builds *might* work in SMP mode
59 # if you define SMP and leave APIC_IO turned off.
61 options SMP # Symmetric MultiProcessor Kernel
62 #options APIC_IO # Symmetric (APIC) I/O
64 # The PF Firewall with DragonFly's completely fair packet queuing
83 # Debugging for Development
89 #options ACPI_QUIRK_VMWARE # VMware's ACPI-fast24 timer is broken
96 device fdc0 at isa? port IO_FD1 irq 6 drq 2
97 device fd0 at fdc0 drive 0
98 device fd1 at fdc0 drive 1
100 # If you have a Toshiba Libretto with its Y-E Data PCMCIA floppy,
101 # don't use the above line for fdc0 but the following one:
104 # AHCI driver, this will override NATA for AHCI devices,
105 # both drivers may be included.
109 # Sil3124/3132/3531 driver
113 # NEW-ATA (NATA) and ATAPI devices
116 device natadisk # ATA disk drives
117 device natapicd # ATAPI CDROM drives
118 device natapifd # ATAPI floppy drives
119 device natapist # ATAPI tape drives
120 device natapicam # Emulate ATAPI devices as SCSI
121 device nataraid # support for ATA software RAID
123 device natausb # ATA-over-USB support
124 options ATA_STATIC_ID # Static device numbering
125 options PCI_MAP_FIXUP # Needed for NATA
127 # LEGACY ATA and ATAPI devices
128 #device ata0 at isa? port IO_WD1 irq 14
129 #device ata1 at isa? port IO_WD2 irq 15
131 #device atadisk # ATA disk drives
132 #device atapicd # ATAPI CDROM drives
133 #device atapifd # ATAPI floppy drives
134 #device atapist # ATAPI tape drives
135 #device atapicam # Emulate ATAPI devices as SCSI via CAM
136 #options ATA_STATIC_ID #Static device numbering
139 device ahb # EISA AHA1742 family
140 device ahc # AHA2940 and onboard AIC7xxx devices
141 device ahd # AHA39320/29320 and onboard AIC79xx devices
142 device amd # AMD 53C974 (Tekram DC-390(T))
143 device isp # Qlogic family
144 device mpt # LSI-Logic MPT/Fusion
145 device ncr # NCR/Symbios Logic
146 device sym # NCR/Symbios Logic (newer chipsets)
147 options SYM_SETUP_LP_PROBE_MAP=0x40
148 # Allow ncr to attach legacy NCR devices when
149 # both sym and ncr are configured
157 device ncv # NCR 53C500
158 device nsp # Workbit Ninja SCSI-3
159 device stg # TMC 18C30/18C50
162 device scbus # SCSI bus (required)
163 device da # Direct Access (disks)
164 device sa # Sequential Access (tape etc)
166 device pass # Passthrough device (direct SCSI access)
168 # RAID controllers interfaced to the SCSI subsystem
169 device asr # DPT SmartRAID V, VI and Adaptec SCSI RAID
170 device dpt # DPT Smartcache - See LINT for options!
171 device iir # Intel Integrated RAID
172 device mly # Mylex AcceleRAID/eXtremeRAID
173 device ciss # Compaq SmartRAID 5* series
176 device aac # Adaptec FSA RAID, Dell PERC2/PERC3
177 #device aacp # SCSI passthrough for aac (requires CAM)
178 device ida # Compaq Smart RAID
179 device ips # IBM ServeRAID
180 device amr # AMI MegaRAID
181 device mlx # Mylex DAC960 family
182 device twe # 3ware Escalade 7000/8000's
183 device twa # 3ware Escalade 9000's
184 device pst # Promise Supertrack
186 # atkbdc0 controls both the keyboard and the PS/2 mouse
187 device atkbdc0 at isa? port IO_KBD
188 device atkbd0 at atkbdc? irq 1 flags 0x1
189 device psm0 at atkbdc? irq 12
193 # splash screen/screen saver
196 # syscons is the default console driver, resembling an SCO console
197 device sc0 at isa? flags 0x100
198 options SC_PIXEL_MODE # add support for the raster text mode
200 device agp # support several AGP chipsets
202 # Floating point support - do not disable.
203 device npx0 at nexus? port IO_NPX irq 13
205 # Power management support (see LINT for more options)
206 device apm0 at nexus? disable flags 0x20 # Advanced Power Management
208 # HW monitoring devices
209 device lm0 at isa? port 0x290
210 device it0 at isa? port 0x290
211 device it1 at isa? port 0xc00
212 device it2 at isa? port 0xd00
214 # PCCARD (PCMCIA) support
220 device sio0 at isa? port IO_COM1 flags 0x10 irq 4
221 device sio1 at isa? port IO_COM2 irq 3
222 device sio2 at isa? disable port IO_COM3 irq 5
223 device sio3 at isa? disable port IO_COM4 irq 9
226 device ppc0 at isa? irq 7
227 device ppbus # Parallel port bus (required)
229 device plip # TCP/IP over parallel
230 device ppi # Parallel port interface device
231 #device vpo # Requires scbus and da
235 device de # DEC/Intel DC21x4x (``Tulip'')
236 device txp # 3Com 3cR990 (``Typhoon'')
237 device vx # 3Com 3c590, 3c595 (``Vortex'')
239 device em # Intel PRO/1000 adapter Gigabit Ethernet Card (``Wiseman'')
241 device ig_hal # Intel PRO/1000 hardware abstraction layer
243 # PCI Ethernet NICs that use the common MII bus controller code.
244 # NOTE: Be sure to keep the 'device miibus' line in order to use these NICs!
245 device miibus # MII bus support
246 device ale # Atheros AR8121/AR8113/AR8114
247 device bce # Broadcom NetXtreme II Gigabit Ethernet
248 device bfe # Broadcom BCM440x 10/100 Ethernet
249 device dc # DEC/Intel 21143 and various workalikes
250 device et # Agere ET1310 10/100/1000 Ethernet
251 device fxp # Intel EtherExpress PRO/100B (82557, 82558)
252 device jme # JMicron Gigabit/Fast Ethernet
253 device pcn # AMD Am79C97x PCI 10/100 NICs
254 device rl # RealTek 8129/8139
255 device re # RealTek 8139C+/8169
256 device sf # Adaptec AIC-6915 (``Starfire'')
257 device sis # Silicon Integrated Systems SiS 900/SiS 7016
258 device sk # SysKonnect GEnesis, LinkSys EG1023, D-Link
259 device ste # Sundance ST201 (D-Link DFE-550TX)
260 device tl # Texas Instruments ThunderLAN
261 device tx # SMC EtherPower II (83c170 ``EPIC'')
262 device vge # VIA 612x GigE
263 device vr # VIA Rhine, Rhine II
264 device wb # Winbond W89C840F
265 device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'')
266 device bge # Broadcom BCM570x (``Tigon III'')
267 device stge # Sundance/Tamarack TC9021 Gigabit Ethernet
268 device msk # Marvell/SysKonnect Yukon II Gigabit Ethernet
269 device nfe # NVIDIA nForce MCP 10/100/Gigabit Ethernet
272 # 'device ed' requires 'device miibus'
273 device ed0 at isa? disable port 0x280 irq 10 iomem 0xd8000
276 device fe0 at isa? disable port 0x300
281 device wlan # 802.11 support
282 device wlan_ccmp # 802.11 CCMP support
283 device wlan_tkip # 802.11 TKIP support
284 device wlan_wep # 802.11 WEP support
285 # 802.11 TX rate control algorithms
286 #device wlan_ratectl_amrr # AMRR
287 device wlan_ratectl_onoe # Onoe
288 device wlan_ratectl_sample # Sample
290 # Aironet 4500/4800 802.11 wireless NICs. Note: the declaration below will
291 # work for PCMCIA and PCI cards, as well as ISA cards set to ISA PnP
292 # mode (the factory default). If you set the switches on your ISA
293 # card for a manually chosen I/O address and IRQ, you must specify
294 # those parameters here.
296 device ral # Ralink Technology 802.11 wireless NIC
297 # Requires wlan_ratectl_onoe and
298 # wlan_ratectl_sample
299 device rtw # RealTek 802.11 wireless NIC
300 # Requires wlan_ratectl_onoe and wlan_wep
301 # WaveLAN/IEEE 802.11 wireless NICs. Note: the WaveLAN/IEEE really
302 # exists only as a PCMCIA device, so there is no ISA attachment needed
303 # and resources will always be dynamically assigned by the pccard code.
306 # The probe order of these is presently determined by i386/isa/isa_compat.c.
307 device ie0 at isa? disable port 0x300 irq 10 iomem 0xd0000
308 #device le0 at isa? disable port 0x300 irq 5 iomem 0xd0000
309 device lnc0 at isa? disable port 0x280 irq 10 drq 0
310 device cs0 at isa? disable port 0x300
311 device sn0 at isa? disable port 0x300 irq 10
313 # Pseudo devices - the number indicates how many units to allocate.
314 pseudo-device loop # Network loopback
315 pseudo-device ether # Ethernet support
316 pseudo-device sl 1 # Kernel SLIP
317 pseudo-device ppp 1 # Kernel PPP
318 pseudo-device tun # Packet tunnel.
319 pseudo-device pty # Pseudo-ttys (telnet etc)
320 pseudo-device md # Memory "disks"
321 pseudo-device gif # IPv6 and IPv4 tunneling
322 pseudo-device faith 1 # IPv6-to-IPv4 relaying (translation)
324 # The `bpf' pseudo-device enables the Berkeley Packet Filter.
325 # Be aware of the administrative consequences of enabling this!
326 pseudo-device bpf #Berkeley packet filter
328 pseudo-device crypto # core crypto support, used by wlan
331 device uhci # UHCI PCI->USB interface
332 device ohci # OHCI PCI->USB interface
333 device usb # USB Bus (required)
334 device ugen # Generic
335 device uhid # "Human Interface Devices"
336 device ukbd # Keyboard
337 device ulpt # Printer
338 device umass # Disks/Mass storage - Requires scbus and da
340 device uscanner # Scanners
341 device urio # Diamond Rio MP3 Player
342 # USB Ethernet, requires mii
343 device aue # ADMtek USB ethernet
344 device axe # ASIX Electronics USB Ethernet
345 device cue # CATC USB ethernet
346 device kue # Kawasaki LSI USB ethernet
347 device rue # RealTek 8150 based USB ethernet
348 # USB wireless NICs, requires wlan, wlan_ratectl_onoe
349 device rum # Ralink Technology RT2501USB/RT2601USB
350 device ural # Ralink Technology RT2500USB
353 device firewire # FireWire bus code
354 device sbp # SCSI over FireWire (Requires scbus and da)
355 device fwe # Ethernet over FireWire (non-standard!)