sys/conf/options

   1 # $FreeBSD: src/sys/conf/options,v 1.191.2.53 2003/06/04 17:56:58 sam Exp $
   2 #
   3 #        On the handling of kernel options
   4 #
   5 # All kernel options should be listed in LINT64, with suitable
   6 # descriptions.  Negative options (options that make some code not
   7 # compile) should be commented out; LINT64 should compile as much code
   8 # as possible.  Try to structure option-using code so that a single
   9 # option only switch code on, or only switch code off, to make it
  10 # possible to have a full compile-test.  If necessary, you can include
  11 # "opt_lint.h" and check for COMPILING_LINT64 to get maximum code
  12 # coverage.
  13 #
  14 # All new options shall also be listed in either "conf/options" or
  15 # "platform/<platform>/conf/options".  Options that affect a single
  16 # source-file <xxx>.[c|s] should be directed into "opt_<xxx>.h", while
  17 # options that affect multiple files should either go in
  18 # "opt_global.h" if this is a kernel-wide option (used just about
  19 # everywhere), or in "opt_<option-name-in-lower-case>.h" if it affect
  20 # only some files.  Note that the effect of listing only an option
  21 # without a header-file-name in conf/options (and cousins) is that the
  22 # last convention is followed.
  23 #
  24 # This handling scheme is not yet fully implemented.
  25 #
  26 #
  27 # Format of this file:
  28 # Option name   filename
  29 #
  30 # If filename is missing, the default is
  31 # opt_<name-of-option-in-lower-case>.h
  32
  33 # Adaptec Array Controller driver options
  34 AAC_DEBUG               opt_aac.h
  35
  36 # Adaptec aic7xxx SCSI controller options
  37 AHC_ALLOW_MEMIO         opt_aic7xxx.h   # Allow PCI devices to use memory
  38                                         # mapped I/O
  39
  40 AHC_TMODE_ENABLE        opt_aic7xxx.h   # Bitmap of units to enable
  41                                         # targetmode operations.
  42
  43 AHC_DUMP_EEPROM         opt_aic7xxx.h   # Dump the contents of our
  44                                         # configuration prom.
  45
  46 AHC_DEBUG               opt_aic7xxx.h   # Compile in Aic7xxx Debugging code.
  47
  48 AHC_DEBUG_OPTS          opt_aic7xxx.h   # Aic7xxx driver debugging options.
  49                                         # See sys/dev/aic7xxx/aic7xxx.h
  50
  51 AHC_REG_PRETTY_PRINT    opt_aic7xxx.h   # Print register bitfields in debug
  52                                         # output.  Adds ~15k to driver.
  53
  54 # Adaptec aic79xx SCSI controller options
  55 AHD_DEBUG               opt_aic79xx.h   # Compile in Aic79xx Debugging code.
  56
  57 AHD_DEBUG_OPTS          opt_aic79xx.h   # Aic79xx driver debugging options.
  58                                         # See sys/dev/aic7xxx/aic79xx.h
  59
  60 AHD_TMODE_ENABLE        opt_aic79xx.h   # Bitmap of units to enable
  61                                         # targetmode operations.
  62
  63 AHD_REG_PRETTY_PRINT    opt_aic79xx.h   # Print register bitfields in debug
  64                                         # output.  Adds ~15k to driver.
  65
  66 ADW_ALLOW_MEMIO         opt_adw.h       # Allow PCI devices to use memory
  67                                         # mapped I/O
  68 AMR_DEBUG               opt_amr.h
  69 TWA_DEBUG               opt_twa.h
  70
  71 #options for ACPI support
  72 ACPI_DEBUG              opt_acpi.h
  73 ACPI_NO_SEMAPHORES      opt_acpi.h
  74 ACPI_ENABLE_PCI         opt_acpi.h
  75
  76 # Miscellaneous options.
  77 COMPILING_LINT  opt_lint.h
  78 DDB
  79 DDB_TRACE
  80 DDB_UNATTENDED  opt_ddb.h
  81 GDB_REMOTE_CHAT opt_ddb.h
  82 KTRACE
  83 LIBICONV
  84 MD_NSECT        opt_md.h
  85 MD_ROOT         opt_md.h
  86 MD_ROOT_SIZE    opt_md.h
  87 MFI_DEBUG       opt_mfi.h
  88 NSWAPDEV        opt_swap.h
  89 NSWBUF_MIN      opt_swap.h
  90 PPS_SYNC        opt_ntp.h
  91 QUOTA
  92 SUIDDIR         opt_suiddir.h
  93 SHMMIN          opt_sysvipc.h
  94 SHMMNI          opt_sysvipc.h
  95 SHMSEG          opt_sysvipc.h
  96 SEMMAP          opt_sysvipc.h
  97 SEMMNI          opt_sysvipc.h
  98 SEMMNS          opt_sysvipc.h
  99 SEMMNU          opt_sysvipc.h
 100 SEMMSL          opt_sysvipc.h
 101 SEMOPM          opt_sysvipc.h
 102 SEMUME          opt_sysvipc.h
 103 MSGMNB          opt_sysvipc.h
 104 MSGMNI          opt_sysvipc.h
 105 MSGSEG          opt_sysvipc.h
 106 MSGSSZ          opt_sysvipc.h
 107 MSGTQL          opt_sysvipc.h
 108 UCONSOLE
 109 ICMP_BANDLIM
 110 SHOW_BUSYBUFS
 111 DIRECTIO        opt_directio.h
 112
 113 # POSIX kernel options
 114 _KPOSIX_PRIORITY_SCHEDULING     opt_posix.h
 115
 116 # Do we want the config file compiled into the kernel?
 117 INCLUDE_CONFIG_FILE     opt_config.h
 118
 119 # Options for static file systems.  These should only be used at config
 120 # time, since the corresponding lkms cannot work if there are any static
 121 # dependencies.  Unusability is enforced by hiding the defines for the
 122 # options in a never-included header.
 123 EXT2FS          opt_dontuse.h
 124 HAMMER          opt_dontuse.h
 125 HPFS            opt_dontuse.h
 126 MFS             opt_dontuse.h
 127 MSDOSFS         opt_dontuse.h
 128 NTFS            opt_dontuse.h
 129 NULLFS          opt_dontuse.h
 130 PROCFS          opt_dontuse.h
 131 PUFFS           opt_dontuse.h
 132 SMBFS           opt_dontuse.h
 133 TMPFS           opt_dontuse.h
 134 UDF             opt_dontuse.h
 135 AUTOFS          opt_dontuse.h
 136
 137 # These static filesystems has one slightly bogus static dependency in
 138 # sys/platform/.../i386/autoconf.c.  If any of these filesystems are
 139 # statically compiled into the kernel, code for mounting them as root
 140 # filesystems will be enabled - but look below.  Boot-code is purposely
 141 # unavailable for the LKM-based versions.
 142 CD9660
 143 FFS
 144 NFS
 145
 146 # filesystems and libiconv bridge
 147 CD9660_ICONV    opt_dontuse.h
 148 MSDOSFS_ICONV   opt_dontuse.h
 149 NTFS_ICONV      opt_dontuse.h
 150
 151 # SMB/CIFS requester
 152 NETSMB          opt_netsmb.h
 153
 154 # If you are following the conditions in the copyright,
 155 # you can enable soft-updates which will speed up a lot of things
 156 # and make the system safer from crashes at the same time.
 157 # otherwise a STUB module will be compiled in.
 158 SOFTUPDATES     opt_ffs.h
 159
 160 # Enable fast hash lookups for large directories on UFS-based filesystems.
 161 UFS_DIRHASH     opt_ufs.h
 162
 163 # The above static dependencies are planned removed, with a
 164 # <filesystem>_ROOT option to control if it usable as root.  This list
 165 # allows these options to be present in config files already (though
 166 # they won't make any difference yet).
 167 FFS_ROOT        opt_ffs.h
 168 NFS_ROOT        opt_nfsroot.h
 169
 170 # Options used only in subr_param.c.
 171 HZ              opt_param.h
 172 MAXFILES        opt_param.h
 173 NBUF            opt_param.h
 174 NMBCLUSTERS     opt_param.h
 175 NMBUFS          opt_param.h
 176 VM_BCACHE_SIZE_MAX      opt_param.h
 177 VM_SWZONE_SIZE_MAX      opt_param.h
 178 MAXUSERS
 179 DFLDSIZ         opt_param.h
 180 MAXDSIZ         opt_param.h
 181 MAXSSIZ         opt_param.h
 182
 183 # Generic SCSI options.
 184 CAM_MAX_HIGHPOWER       opt_cam.h
 185 CAMDEBUG                opt_cam.h
 186 CAM_DEBUG_DELAY         opt_cam.h
 187 CAM_DEBUG_BUS           opt_cam.h
 188 CAM_DEBUG_TARGET        opt_cam.h
 189 CAM_DEBUG_LUN           opt_cam.h
 190 CAM_DEBUG_FLAGS         opt_cam.h
 191 SCSI_DELAY              opt_scsi.h
 192 SCSI_NO_SENSE_STRINGS   opt_scsi.h
 193 SCSI_NO_OP_STRINGS      opt_scsi.h
 194
 195 # iSCSI options
 196 ISCSI_INITIATOR_DEBUG   opt_iscsi_initiator.h
 197
 198 # Options used only in cam/scsi/scsi_cd.c
 199 CHANGER_MIN_BUSY_SECONDS        opt_cd.h
 200 CHANGER_MAX_BUSY_SECONDS        opt_cd.h
 201
 202 # Options used only in cam/scsi/scsi_sa.c.
 203 SA_IO_TIMEOUT           opt_sa.h
 204 SA_SPACE_TIMEOUT        opt_sa.h
 205 SA_REWIND_TIMEOUT       opt_sa.h
 206 SA_ERASE_TIMEOUT        opt_sa.h
 207 SA_1FM_AT_EOD           opt_sa.h
 208
 209 # Options used only in cam/scsi/scsi_pt.c
 210 SCSI_PT_DEFAULT_TIMEOUT opt_pt.h
 211
 212 # Options used only in cam/scsi/scsi_ses.c
 213 SES_ENABLE_PASSTHROUGH  opt_ses.h
 214
 215 # Options used in dev/sym/ (Symbios SCSI driver).
 216 SYM_SETUP_LP_PROBE_MAP  opt_sym.h       #-Low Priority Probe Map (bits)
 217                                         # Allows the ncr to take precedence
 218                                         # 1 (1<<0) -> 810a, 860
 219                                         # 2 (1<<1) -> 825a, 875, 885, 895
 220                                         # 4 (1<<2) -> 895a, 896, 1510d
 221 SYM_SETUP_SCSI_DIFF     opt_sym.h       #-HVD support for 825a, 875, 885
 222                                         # disabled:0 (default), enabled:1
 223 SYM_SETUP_PCI_PARITY    opt_sym.h       #-PCI parity checking
 224                                         # disabled:0, enabled:1 (default)
 225 SYM_SETUP_MAX_LUN       opt_sym.h       #-Number of LUNs supported
 226                                         # default:8, range:[1..64]
 227
 228 # Options used only in pci/ncr.c
 229 SCSI_NCR_DEBUG          opt_ncr.h
 230 SCSI_NCR_MAX_SYNC       opt_ncr.h
 231 SCSI_NCR_MAX_WIDE       opt_ncr.h
 232 SCSI_NCR_MYADDR         opt_ncr.h
 233
 234 # Options used only in pci/isp_pci.c
 235 ISP_TARGET_MODE         opt_isp.h
 236
 237 # Options used in the 'nata' ATA/ATAPI driver
 238 ATA_STATIC_ID           opt_ata.h
 239
 240 # Net stuff.
 241 # altq stuff
 242 ALTQ                    opt_global.h
 243 ALTQ_CBQ                opt_altq.h
 244 ALTQ_RED                opt_altq.h
 245 ALTQ_RIO                opt_altq.h
 246 ALTQ_HFSC               opt_altq.h
 247 ALTQ_PRIQ               opt_altq.h
 248 ALTQ_FAIRQ              opt_altq.h
 249 ALTQ_NOPCC              opt_altq.h
 250 ALTQ_DEBUG              opt_altq.h
 251
 252 ACCEPT_FILTER_DATA
 253 ACCEPT_FILTER_HTTP
 254 BOOTP                   opt_bootp.h
 255 BOOTP_COMPAT            opt_bootp.h
 256 BOOTP_NFSROOT           opt_bootp.h
 257 BOOTP_WIRED_TO          opt_bootp.h
 258 CARP                    opt_carp.h
 259 MROUTING                opt_mrouting.h
 260 PIM                     opt_mrouting.h
 261 INET                    opt_inet.h
 262 INET6                   opt_inet6.h
 263 IPSEC                   opt_ipsec.h
 264 IPSEC_ESP               opt_ipsec.h
 265 IPSEC_DEBUG             opt_ipsec.h
 266 IPSEC_FILTERGIF         opt_ipsec.h
 267 FAST_IPSEC              opt_ipsec.h
 268 IPDIVERT
 269 DUMMYNET                opt_ipdn.h
 270 DUMMYNET_DEBUG          opt_ipdn.h
 271 IPFIREWALL              opt_ipfw.h
 272 IPFIREWALL3             opt_ipfw.h
 273 IPFIREWALL_DEBUG        opt_ipfw.h
 274 IPFIREWALL_VERBOSE      opt_ipfw.h
 275 IPFIREWALL_VERBOSE_LIMIT        opt_ipfw.h
 276 IPFIREWALL_DEFAULT_TO_ACCEPT    opt_ipfw.h
 277 IPV6FIREWALL            opt_ip6fw.h
 278 IPV6FIREWALL_VERBOSE    opt_ip6fw.h
 279 IPV6FIREWALL_VERBOSE_LIMIT      opt_ip6fw.h
 280 IPV6FIREWALL_DEFAULT_TO_ACCEPT  opt_ip6fw.h
 281 IPSTEALTH
 282 LIBMCHAIN
 283 MPLS                    opt_mpls.h
 284 PPP_BSDCOMP             opt_ppp.h
 285 PPP_DEFLATE             opt_ppp.h
 286 PPP_FILTER              opt_ppp.h
 287 TCPDEBUG
 288 TCP_SIGNATURE           opt_inet.h
 289 TCP_DROP_SYNFIN         opt_tcp_input.h
 290 ICMPPRINTFS
 291
 292 XBONEHACK
 293 MBUF_STRESS_TEST        opt_mbuf_stress_test.h
 294
 295 # (New netgraph, port still in progress)
 296 #
 297 # Netgraph(4). Use option NETGRAPH7 to enable the base netgraph code.
 298 # Each netgraph node type can be either be compiled into the kernel
 299 # or loaded dynamically. To get the former, include the corresponding
 300 # option below. Each type has its own man page, e.g. ng_async(4).
 301 NETGRAPH7
 302 NETGRAPH7_DEBUG         opt_netgraph.h
 303 NETGRAPH7_ASYNC         opt_netgraph.h
 304 NETGRAPH7_ATMLLC        opt_netgraph.h
 305 NETGRAPH7_ATM_ATMPIF    opt_netgraph.h
 306 NETGRAPH7_BLUETOOTH             opt_netgraph.h
 307 NETGRAPH7_BLUETOOTH_BT3C        opt_netgraph.h
 308 NETGRAPH7_BLUETOOTH_H4          opt_netgraph.h
 309 NETGRAPH7_BLUETOOTH_HCI         opt_netgraph.h
 310 NETGRAPH7_BLUETOOTH_L2CAP       opt_netgraph.h
 311 NETGRAPH7_BLUETOOTH_SOCKET      opt_netgraph.h
 312 NETGRAPH7_BLUETOOTH_UBT         opt_netgraph.h
 313 NETGRAPH7_BLUETOOTH_UBTBCMFW    opt_netgraph.h
 314 NETGRAPH7_BPF           opt_netgraph.h
 315 NETGRAPH7_BRIDGE        opt_netgraph.h
 316 NETGRAPH7_CAR           opt_netgraph.h
 317 NETGRAPH7_CISCO         opt_netgraph.h
 318 NETGRAPH7_DEFLATE       opt_netgraph.h
 319 NETGRAPH7_DEVICE        opt_netgraph.h
 320 NETGRAPH7_ECHO          opt_netgraph.h
 321 NETGRAPH7_EIFACE        opt_netgraph.h
 322 NETGRAPH7_ETF           opt_netgraph.h
 323 NETGRAPH7_ETHER         opt_netgraph.h
 324 NETGRAPH7_FEC           opt_netgraph.h
 325 NETGRAPH7_FRAME_RELAY   opt_netgraph.h
 326 NETGRAPH7_GIF           opt_netgraph.h
 327 NETGRAPH7_GIF_DEMUX     opt_netgraph.h
 328 NETGRAPH7_HOLE          opt_netgraph.h
 329 NETGRAPH7_HUB           opt_netgraph.h
 330 NETGRAPH7_IFACE         opt_netgraph.h
 331 NETGRAPH7_IP_INPUT      opt_netgraph.h
 332 NETGRAPH7_IPFW          opt_netgraph.h
 333 NETGRAPH7_KSOCKET       opt_netgraph.h
 334 NETGRAPH7_L2TP          opt_netgraph.h
 335 NETGRAPH7_LMI           opt_netgraph.h
 336 # MPPC compression requires proprietary files (not included)
 337 NETGRAPH7_MPPC_COMPRESSION      opt_netgraph.h
 338 NETGRAPH7_MPPC_ENCRYPTION       opt_netgraph.h
 339 NETGRAPH7_NAT           opt_netgraph.h
 340 NETGRAPH7_NETFLOW       opt_netgraph.h
 341 NETGRAPH7_ONE2MANY      opt_netgraph.h
 342 NETGRAPH7_PPP           opt_netgraph.h
 343 NETGRAPH7_PPPOE         opt_netgraph.h
 344 NETGRAPH7_PPTPGRE       opt_netgraph.h
 345 NETGRAPH7_PRED1         opt_netgraph.h
 346 NETGRAPH7_RFC1490       opt_netgraph.h
 347 NETGRAPH7_SOCKET        opt_netgraph.h
 348 NETGRAPH7_SPLIT         opt_netgraph.h
 349 NETGRAPH7_SPPP          opt_netgraph.h
 350 NETGRAPH7_TAG           opt_netgraph.h
 351 NETGRAPH7_TCPMSS        opt_netgraph.h
 352 NETGRAPH7_TEE           opt_netgraph.h
 353 NETGRAPH7_TTY           opt_netgraph.h
 354 NETGRAPH7_UI            opt_netgraph.h
 355 NETGRAPH7_VJC           opt_netgraph.h
 356
 357 # NgATM options
 358 NGATM7_ATM              opt_netgraph.h
 359 NGATM7_ATMBASE          opt_netgraph.h
 360 NGATM7_SSCOP            opt_netgraph.h
 361 NGATM7_SSCFU            opt_netgraph.h
 362 NGATM7_UNI              opt_netgraph.h
 363 NGATM7_CCATM            opt_netgraph.h
 364
 365 # Netgraph(4). Use option NETGRAPH to enable the base netgraph code.
 366 # Each netgraph node type can be either be compiled into the kernel
 367 # or loaded dynamically. To get the former, include the corresponding
 368 # option below. Each type has its own man page, e.g. ng_async(8).
 369 NETGRAPH
 370 NETGRAPH_ASYNC          opt_netgraph.h
 371 NETGRAPH_BPF            opt_netgraph.h
 372 NETGRAPH_BRIDGE         opt_netgraph.h
 373 NETGRAPH_CISCO          opt_netgraph.h
 374 NETGRAPH_ECHO           opt_netgraph.h
 375 NETGRAPH_EIFACE         opt_netgraph.h
 376 NETGRAPH_ETHER          opt_netgraph.h
 377 NETGRAPH_FEC            opt_netgraph.h
 378 NETGRAPH_FRAME_RELAY    opt_netgraph.h
 379 NETGRAPH_HOLE           opt_netgraph.h
 380 NETGRAPH_IFACE          opt_netgraph.h
 381 NETGRAPH_KSOCKET        opt_netgraph.h
 382 NETGRAPH_LMI            opt_netgraph.h
 383 NETGRAPH_L2TP           opt_netgraph.h
 384 # MPPC compression requires proprietary files (not included)
 385 NETGRAPH_MPPC_COMPRESSION       opt_netgraph.h
 386 NETGRAPH_MPPC_ENCRYPTION        opt_netgraph.h
 387 NETGRAPH_ONE2MANY       opt_netgraph.h
 388 NETGRAPH_PPP            opt_netgraph.h
 389 NETGRAPH_PPPOE          opt_netgraph.h
 390 NETGRAPH_PPTPGRE        opt_netgraph.h
 391 NETGRAPH_RFC1490        opt_netgraph.h
 392 NETGRAPH_SOCKET         opt_netgraph.h
 393 NETGRAPH_TEE            opt_netgraph.h
 394 NETGRAPH_TTY            opt_netgraph.h
 395 NETGRAPH_UI             opt_netgraph.h
 396 NETGRAPH_VJC            opt_netgraph.h
 397
 398 # AGP options
 399 AGP_DEBUG               opt_agp.h
 400
 401 # DRM options
 402 DRM_DEBUG               opt_drm.h
 403 DRM_LINUX               opt_drm.h
 404
 405 # DPT driver debug flags
 406 DPT_MEASURE_PERFORMANCE opt_dpt.h
 407 DPT_HANDLE_TIMEOUTS     opt_dpt.h
 408 DPT_TIMEOUT_FACTOR      opt_dpt.h
 409 DPT_LOST_IRQ            opt_dpt.h
 410 DPT_RESET_HBA           opt_dpt.h
 411
 412 # Misc debug flags.  Most of these should probably be replaced with
 413 # 'DEBUG', and then let people recompile just the interesting modules
 414 # with 'make CC="cc -DDEBUG"'.
 415 CLUSTERDEBUG            opt_debug_cluster.h
 416 DEBUG_1284              opt_ppb_1284.h
 417 VP0_DEBUG               opt_vpo.h
 418 LPT_DEBUG               opt_lpt.h
 419 PLIP_DEBUG              opt_plip.h
 420 LOCKF_DEBUG             opt_debug_lockf.h
 421 SI_DEBUG                opt_debug_si.h
 422
 423 # Fb options
 424 FB_DEBUG                opt_fb.h
 425 FB_INSTALL_CDEV         opt_fb.h
 426
 427 # ppbus related options
 428 PERIPH_1284             opt_ppb_1284.h
 429 DONTPROBE_1284          opt_ppb_1284.h
 430
 431 # smbus related options
 432 ENABLE_ALART            opt_intpm.h
 433
 434 # These cause changes all over the kernel
 435 NO_LWKT_SPLIT_USERPRI   opt_global.h
 436 BLKDEV_IOSIZE           opt_global.h
 437 DEBUG                   opt_global.h
 438 DEBUG_LOCKS             opt_global.h
 439 DEBUG_LOCKS_LATENCY     opt_global.h
 440 DEBUG_CRIT_SECTIONS     opt_global.h
 441 DIAGNOSTIC              opt_global.h
 442 INVARIANTS              opt_global.h
 443 VFS_BIO_DEBUG           opt_global.h
 444 SOCKBUF_DEBUG           opt_global.h
 445 PANIC_DEBUG             opt_global.h
 446 MBUF_DEBUG              opt_global.h
 447 PMAP_DEBUG              opt_global.h
 448 VM_PAGE_DEBUG           opt_global.h
 449 SLAB_DEBUG              opt_global.h
 450
 451 # Sample system/interrupt PC
 452 DEBUG_PCTRACK           opt_pctrack.h
 453
 454 # These are VM related options
 455 NO_SWAPPING             opt_vm.h
 456
 457 # sys/netkey
 458 KEY
 459
 460 # Size of the kernel message buffer
 461 MSGBUF_SIZE             opt_msgbuf.h
 462
 463 # NFS options
 464 NFS_MINATTRTIMO         opt_nfs.h
 465 NFS_MAXATTRTIMO         opt_nfs.h
 466 NFS_MINDIRATTRTIMO      opt_nfs.h
 467 NFS_MAXDIRATTRTIMO      opt_nfs.h
 468 NFS_GATHERDELAY         opt_nfs.h
 469 NFS_UIDHASHSIZ          opt_nfs.h
 470 NFS_WDELAYHASHSIZ       opt_nfs.h
 471 NFS_MUIDHASHSIZ         opt_nfs.h
 472 NFS_NOSERVER            opt_nfs.h
 473 NFS_DEBUG               opt_nfs.h
 474
 475 # MSDOSFS options
 476 MSDOSFS_DEBUG           opt_msdosfs.h
 477
 478 # For the Bt848/Bt848A/Bt849/Bt878/Bt879 driver
 479 BROOKTREE_SYSTEM_DEFAULT        opt_bktr.h
 480 BROOKTREE_ALLOC_PAGES           opt_bktr.h
 481 BKTR_OVERRIDE_CARD              opt_bktr.h
 482 BKTR_OVERRIDE_TUNER             opt_bktr.h
 483 BKTR_OVERRIDE_DBX               opt_bktr.h
 484 BKTR_OVERRIDE_MSP               opt_bktr.h
 485 BKTR_SYSTEM_DEFAULT             opt_bktr.h
 486 BKTR_ALLOC_PAGES                opt_bktr.h
 487 BKTR_USE_PLL                    opt_bktr.h
 488 BKTR_GPIO_ACCESS                opt_bktr.h
 489 BKTR_NO_MSP_RESET               opt_bktr.h
 490 BKTR_430_FX_MODE                opt_bktr.h
 491 BKTR_SIS_VIA_MODE               opt_bktr.h
 492 BKTR_NEW_MSP34XX_DRIVER         opt_bktr.h
 493
 494 # Various mi ISA bus flags
 495 COM_ESP                 opt_sio.h
 496 COM_MULTIPORT           opt_sio.h
 497 BREAK_TO_DEBUGGER       opt_comconsole.h
 498 ALT_BREAK_TO_DEBUGGER   opt_comconsole.h
 499
 500 # options for bus/device framework
 501 BUS_DEBUG               opt_bus.h
 502
 503 # options for USB support
 504 OHCI_DEBUG              opt_usb.h
 505 USB_DEBUG               opt_usb.h
 506
 507 # options for the Realtek RTL8188*U/RTL8192CU driver (urtwn)
 508 URTWN_WITHOUT_UCODE     opt_urtwn.h
 509
 510 # Vinum options
 511 VINUMDEBUG              opt_vinum.h
 512
 513 # Embedded system options
 514 UKBD_DFLT_KEYMAP        opt_ukbd.h
 515 INIT_PATH               opt_init_path.h
 516
 517 ROOTDEVNAME             opt_rootdevname.h
 518
 519 FDC_DEBUG               opt_fdc.h
 520 PCFCLOCK_VERBOSE        opt_pcfclock.h
 521 PCFCLOCK_MAX_RETRIES    opt_pcfclock.h
 522
 523 # Network device queue based polling
 524 IFPOLL_ENABLE           opt_ifpoll.h
 525
 526 # options for ubsec driver
 527 UBSEC_DEBUG             opt_ubsec.h
 528 UBSEC_RNDTEST           opt_ubsec.h
 529 UBSEC_NO_RNG            opt_ubsec.h
 530
 531 # options for hifn driver
 532 HIFN_DEBUG              opt_hifn.h
 533 HIFN_RNDTEST            opt_hifn.h
 534 HIFN_NO_RNG             opt_hifn.h
 535
 536 # options for safenet driver
 537 SAFE_DEBUG              opt_safe.h
 538 SAFE_NO_RNG             opt_safe.h
 539 SAFE_RNDTEST            opt_safe.h
 540
 541 # KTR options
 542 KTR                             opt_global.h
 543 KTR_ENTRIES                     opt_global.h
 544 KTR_ALL                         opt_ktr.h
 545 KTR_ACPI_EC                     opt_ktr.h
 546 KTR_CTXSW                       opt_ktr.h
 547 KTR_DMCRYPT                     opt_ktr.h
 548 KTR_ETHERNET                    opt_ktr.h
 549 KTR_HAMMER                      opt_ktr.h
 550 KTR_IFQ                         opt_ktr.h
 551 KTR_IF_BGE                      opt_ktr.h
 552 KTR_IF_EM                       opt_ktr.h
 553 KTR_IF_EMX                      opt_ktr.h
 554 KTR_IF_START                    opt_ktr.h
 555 KTR_IPIQ                        opt_ktr.h
 556 KTR_KERNENTRY                   opt_ktr.h
 557 KTR_MEMORY                      opt_ktr.h
 558 KTR_SERIALIZER                  opt_ktr.h
 559 KTR_SPIN_CONTENTION             opt_ktr.h
 560 KTR_TESTLOG                     opt_ktr.h
 561 KTR_TOKENS                      opt_ktr.h
 562 KTR_TSLEEP                      opt_ktr.h
 563 KTR_USCHED_BSD4                 opt_ktr.h
 564 KTR_USCHED_DFLY                 opt_ktr.h
 565 KTR_VERBOSE                     opt_ktr.h
 566 KTR_IF_POLL                     opt_ktr.h
 567 KTR_UDP                         opt_ktr.h
 568 KTR_SOWAKEUP                    opt_ktr.h
 569
 570 # NTFS options
 571 NTFS_DEBUG                      opt_ntfs.h
 572
 573 # options for the Atheros driver
 574 ATH_DEBUG               opt_ath.h
 575 #ATH_DEBUG_ALQ          opt_ath.h
 576 ATH_DIAGAPI             opt_ath.h
 577 #ATH_EEPROM_FIRMWARE    opt_ath.h
 578 #ATH_ENABLE_11N         opt_ath.h
 579 ATH_ENABLE_DFS          opt_ath.h
 580 #ATH_ENABLE_RADIOTAP_VENDOR_EXT opt_ath.h
 581 ATH_KTR_INTR_DEBUG      opt_ath.h
 582 #ATH_TX99_DIAG          opt_ath.h
 583
 584 # ...and its HAL
 585 AH_AR5416_INTERRUPT_MITIGATION opt_ah.h
 586 AH_ASSERT               opt_ah.h
 587 AH_DEBUG                opt_ah.h
 588 #AH_DEBUG_ALQ           opt_ah.h
 589 #AH_DEBUG_COUNTRY       opt_ah.h
 590 AH_INTERRUPT_DEBUGGING  opt_ah.h
 591 AH_MAXCHAN              opt_ah.h
 592 AH_NEED_DESC_SWAP       opt_ah.h
 593 AH_PRIVATE_DIAG         opt_ah.h
 594 AH_RXCFG_SDMAMW_4BYTES  opt_ah.h
 595 AH_SUPPORT_AR5416       opt_ah.h
 596 AH_SUPPORT_AR9130       opt_ah.h
 597 AH_SUPPORT_AR9330       opt_ah.h
 598 AH_SUPPORT_AR9340       opt_ah.h
 599 AH_USE_INIPDGAIN        opt_ah.h
 600 #AH_WRITE_EEPROM                opt_ah.h
 601 #AH_WRITE_REGDOMAIN     opt_ah.h
 602
 603 # bce driver
 604 BCE_RSS_DEBUG           opt_bce.h
 605 BCE_TSS_DEBUG           opt_bce.h
 606
 607 # bnx driver
 608 BNX_RSS_DEBUG           opt_bnx.h
 609 BNX_TSO_DEBUG           opt_bnx.h
 610 BNX_TSS_DEBUG           opt_bnx.h
 611
 612 # bwn driver
 613 BWN_DEBUG               opt_bwn.h
 614 BWN_RXRING_SLOTS        opt_bwn.h
 615 BWN_TXRING_SLOTS        opt_bwn.h
 616
 617 # siba_bwn driver
 618 SIBA_DEBUG              opt_siba.h
 619
 620 # emx driver
 621 EMX_RSS_DEBUG           opt_emx.h
 622 EMX_TSO_DEBUG           opt_emx.h
 623 EMX_TSS_DEBUG           opt_emx.h
 624
 625 # jme driver
 626 JME_RSS_DEBUG           opt_jme.h
 627
 628 # igb driver
 629 IGB_RSS_DEBUG           opt_igb.h
 630 IGB_TSS_DEBUG           opt_igb.h
 631 IGB_MSIX_DEBUG          opt_igb.h
 632
 633 # ix driver
 634 IX_RSS_DEBUG            opt_ix.h
 635
 636 # Options for the Intel 802.11ac wireless driver
 637 IWM_DEBUG               opt_iwm.h
 638
 639 # Options for the Intel 802.11n wireless driver
 640 IWN_DEBUG               opt_iwn.h
 641
 642 # Options for the Intel 3945ABG wireless driver
 643 WPI_DEBUG               opt_wpi.h
 644
 645 # dcons options
 646 DCONS_BUF_SIZE          opt_dcons.h
 647 DCONS_POLL_HZ           opt_dcons.h
 648 DCONS_FORCE_CONSOLE     opt_dcons.h
 649 DCONS_FORCE_GDB         opt_dcons.h
 650
 651 # deprecated drivers and options
 652 I_WANT_DEPRECATED_STUFF opt_deprecated.h
 653
 654 # Receive Side Scaling (now basecode)
 655 RSS_DEBUG               opt_rss.h
 656
 657 # Panic settings
 658 WDOG_DISABLE_ON_PANIC   opt_panic.h
 659 ERROR_LED_ON_PANIC      opt_panic.h
 660
 661 # 802.11 support layer
 662 IEEE80211_DEBUG         opt_wlan.h
 663 IEEE80211_DEBUG_REFCNT  opt_wlan.h
 664 IEEE80211_SUPPORT_MESH  opt_wlan.h
 665 IEEE80211_SUPPORT_SUPERG        opt_wlan.h
 666 IEEE80211_SUPPORT_TDMA  opt_wlan.h
 667
 668 # 802.11 TDMA support
 669 TDMA_SLOTLEN_DEFAULT    opt_tdma.h
 670 TDMA_SLOTCNT_DEFAULT    opt_tdma.h
 671 TDMA_BINTVAL_DEFAULT    opt_tdma.h
 672 TDMA_TXRATE_11B_DEFAULT opt_tdma.h
 673 TDMA_TXRATE_11G_DEFAULT opt_tdma.h
 674 TDMA_TXRATE_11A_DEFAULT opt_tdma.h
 675 TDMA_TXRATE_TURBO_DEFAULT       opt_tdma.h
 676 TDMA_TXRATE_HALF_DEFAULT        opt_tdma.h
 677 TDMA_TXRATE_QUARTER_DEFAULT     opt_tdma.h
 678 TDMA_TXRATE_11NA_DEFAULT        opt_tdma.h
 679 TDMA_TXRATE_11NG_DEFAULT        opt_tdma.h
 680
 681 # Sound options
 682 SND_DEBUG               opt_snd.h
 683 SND_DIAGNOSTIC          opt_snd.h
 684 SND_FEEDER_MULTIFORMAT  opt_snd.h
 685 SND_FEEDER_FULL_MULTIFORMAT     opt_snd.h
 686 SND_FEEDER_RATE_HP      opt_snd.h
 687 SND_PCM_64              opt_snd.h
 688 SND_OLDSTEREO           opt_snd.h
 689
 690 PANIC_REBOOT_WAIT_TIME  opt_panic.h
 691
 692 # Obsolete options (will be removed in the future)
 693 #
 694 SYSVMSG                 opt_dontuse.h
 695 SYSVSEM                 opt_dontuse.h
 696 SYSVSHM                 opt_dontuse.h
 697 P1003_1B                opt_dontuse.h
 698 _KPOSIX_VERSION         opt_dontuse.h
 699 DSCHED_FQ               opt_dontuse.h