Merge branch 'vendor/LESS' into less_update
[dragonfly.git] / sys / net / bpf.c
1 /*
2  * Copyright (c) 1990, 1991, 1993
3  *      The Regents of the University of California.  All rights reserved.
4  *
5  * This code is derived from the Stanford/CMU enet packet filter,
6  * (net/enet.c) distributed as part of 4.3BSD, and code contributed
7  * to Berkeley by Steven McCanne and Van Jacobson both of Lawrence
8  * Berkeley Laboratory.
9  *
10  * Redistribution and use in source and binary forms, with or without
11  * modification, are permitted provided that the following conditions
12  * are met:
13  * 1. Redistributions of source code must retain the above copyright
14  *    notice, this list of conditions and the following disclaimer.
15  * 2. Redistributions in binary form must reproduce the above copyright
16  *    notice, this list of conditions and the following disclaimer in the
17  *    documentation and/or other materials provided with the distribution.
18  * 3. All advertising materials mentioning features or use of this software
19  *    must display the following acknowledgement:
20  *      This product includes software developed by the University of
21  *      California, Berkeley and its contributors.
22  * 4. Neither the name of the University nor the names of its contributors
23  *    may be used to endorse or promote products derived from this software
24  *    without specific prior written permission.
25  *
26  * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
27  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
28  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
29  * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
30  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
31  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
32  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
33  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
34  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
35  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
36  * SUCH DAMAGE.
37  *
38  *      @(#)bpf.c       8.2 (Berkeley) 3/28/94
39  *
40  * $FreeBSD: src/sys/net/bpf.c,v 1.59.2.12 2002/04/14 21:41:48 luigi Exp $
41  * $DragonFly: src/sys/net/bpf.c,v 1.50 2008/09/23 11:28:49 sephe Exp $
42  */
43
44 #include "use_bpf.h"
45
46 #include <sys/param.h>
47 #include <sys/systm.h>
48 #include <sys/conf.h>
49 #include <sys/device.h>
50 #include <sys/malloc.h>
51 #include <sys/mbuf.h>
52 #include <sys/time.h>
53 #include <sys/proc.h>
54 #include <sys/signalvar.h>
55 #include <sys/filio.h>
56 #include <sys/sockio.h>
57 #include <sys/ttycom.h>
58 #include <sys/filedesc.h>
59
60 #include <sys/poll.h>
61
62 #include <sys/socket.h>
63 #include <sys/vnode.h>
64
65 #include <sys/thread2.h>
66
67 #include <net/if.h>
68 #include <net/bpf.h>
69 #include <net/bpfdesc.h>
70 #include <net/netmsg2.h>
71
72 #include <netinet/in.h>
73 #include <netinet/if_ether.h>
74 #include <sys/kernel.h>
75 #include <sys/sysctl.h>
76
77 #include <sys/devfs.h>
78
79 struct netmsg_bpf_output {
80         struct netmsg   nm_netmsg;
81         struct mbuf     *nm_mbuf;
82         struct ifnet    *nm_ifp;
83         struct sockaddr *nm_dst;
84 };
85
86 MALLOC_DEFINE(M_BPF, "BPF", "BPF data");
87 DEVFS_DECLARE_CLONE_BITMAP(bpf);
88
89 #if NBPF <= 1
90 #define BPF_PREALLOCATED_UNITS  4
91 #else
92 #define BPF_PREALLOCATED_UNITS  NBPF
93 #endif
94
95 #if NBPF > 0
96
97 /*
98  * The default read buffer size is patchable.
99  */
100 static int bpf_bufsize = BPF_DEFAULTBUFSIZE;
101 SYSCTL_INT(_debug, OID_AUTO, bpf_bufsize, CTLFLAG_RW,
102            &bpf_bufsize, 0, "");
103 int bpf_maxbufsize = BPF_MAXBUFSIZE;
104 SYSCTL_INT(_debug, OID_AUTO, bpf_maxbufsize, CTLFLAG_RW,
105            &bpf_maxbufsize, 0, "");
106
107 /*
108  *  bpf_iflist is the list of interfaces; each corresponds to an ifnet
109  */
110 static struct bpf_if    *bpf_iflist;
111
112 static int      bpf_allocbufs(struct bpf_d *);
113 static void     bpf_attachd(struct bpf_d *d, struct bpf_if *bp);
114 static void     bpf_detachd(struct bpf_d *d);
115 static void     bpf_resetd(struct bpf_d *);
116 static void     bpf_freed(struct bpf_d *);
117 static void     bpf_mcopy(const void *, void *, size_t);
118 static int      bpf_movein(struct uio *, int, struct mbuf **,
119                            struct sockaddr *, int *, struct bpf_insn *);
120 static int      bpf_setif(struct bpf_d *, struct ifreq *);
121 static void     bpf_timed_out(void *);
122 static void     bpf_wakeup(struct bpf_d *);
123 static void     catchpacket(struct bpf_d *, u_char *, u_int, u_int,
124                             void (*)(const void *, void *, size_t),
125                             const struct timeval *);
126 static int      bpf_setf(struct bpf_d *, struct bpf_program *, u_long cmd);
127 static int      bpf_getdltlist(struct bpf_d *, struct bpf_dltlist *);
128 static int      bpf_setdlt(struct bpf_d *, u_int);
129 static void     bpf_drvinit(void *unused);
130
131 static d_open_t         bpfopen;
132 static d_clone_t        bpfclone;
133 static d_close_t        bpfclose;
134 static d_read_t         bpfread;
135 static d_write_t        bpfwrite;
136 static d_ioctl_t        bpfioctl;
137 static d_poll_t         bpfpoll;
138
139 #define CDEV_MAJOR 23
140 static struct dev_ops bpf_ops = {
141         { "bpf", CDEV_MAJOR, 0 },
142         .d_open =       bpfopen,
143         .d_close =      bpfclose,
144         .d_read =       bpfread,
145         .d_write =      bpfwrite,
146         .d_ioctl =      bpfioctl,
147         .d_poll =       bpfpoll,
148 };
149
150
151 static int
152 bpf_movein(struct uio *uio, int linktype, struct mbuf **mp,
153            struct sockaddr *sockp, int *datlen, struct bpf_insn *wfilter)
154 {
155         struct mbuf *m;
156         int error;
157         int len;
158         int hlen;
159         int slen;
160
161         *datlen = 0;
162         *mp = NULL;
163
164         /*
165          * Build a sockaddr based on the data link layer type.
166          * We do this at this level because the ethernet header
167          * is copied directly into the data field of the sockaddr.
168          * In the case of SLIP, there is no header and the packet
169          * is forwarded as is.
170          * Also, we are careful to leave room at the front of the mbuf
171          * for the link level header.
172          */
173         switch (linktype) {
174         case DLT_SLIP:
175                 sockp->sa_family = AF_INET;
176                 hlen = 0;
177                 break;
178
179         case DLT_EN10MB:
180                 sockp->sa_family = AF_UNSPEC;
181                 /* XXX Would MAXLINKHDR be better? */
182                 hlen = sizeof(struct ether_header);
183                 break;
184
185         case DLT_RAW:
186         case DLT_NULL:
187                 sockp->sa_family = AF_UNSPEC;
188                 hlen = 0;
189                 break;
190
191         case DLT_ATM_RFC1483:
192                 /*
193                  * en atm driver requires 4-byte atm pseudo header.
194                  * though it isn't standard, vpi:vci needs to be
195                  * specified anyway.
196                  */
197                 sockp->sa_family = AF_UNSPEC;
198                 hlen = 12;      /* XXX 4(ATM_PH) + 3(LLC) + 5(SNAP) */
199                 break;
200
201         case DLT_PPP:
202                 sockp->sa_family = AF_UNSPEC;
203                 hlen = 4;       /* This should match PPP_HDRLEN */
204                 break;
205
206         default:
207                 return(EIO);
208         }
209
210         len = uio->uio_resid;
211         *datlen = len - hlen;
212         if ((unsigned)len > MCLBYTES)
213                 return(EIO);
214
215         m = m_getl(len, MB_WAIT, MT_DATA, M_PKTHDR, NULL);
216         if (m == NULL)
217                 return(ENOBUFS);
218         m->m_pkthdr.len = m->m_len = len;
219         m->m_pkthdr.rcvif = NULL;
220         *mp = m;
221
222         if (m->m_len < hlen) {
223                 error = EPERM;
224                 goto bad;
225         }
226
227         error = uiomove(mtod(m, u_char *), len, uio);
228         if (error)
229                 goto bad;
230
231         slen = bpf_filter(wfilter, mtod(m, u_char *), len, len);
232         if (slen == 0) {
233                 error = EPERM;
234                 goto bad;
235         }
236
237         /*
238          * Make room for link header, and copy it to sockaddr.
239          */
240         if (hlen != 0) {
241                 bcopy(m->m_data, sockp->sa_data, hlen);
242                 m->m_pkthdr.len -= hlen;
243                 m->m_len -= hlen;
244                 m->m_data += hlen; /* XXX */
245         }
246         return (0);
247 bad:
248         m_freem(m);
249         return(error);
250 }
251
252 /*
253  * Attach file to the bpf interface, i.e. make d listen on bp.
254  * Must be called at splimp.
255  */
256 static void
257 bpf_attachd(struct bpf_d *d, struct bpf_if *bp)
258 {
259         /*
260          * Point d at bp, and add d to the interface's list of listeners.
261          * Finally, point the driver's bpf cookie at the interface so
262          * it will divert packets to bpf.
263          */
264         d->bd_bif = bp;
265         SLIST_INSERT_HEAD(&bp->bif_dlist, d, bd_next);
266         *bp->bif_driverp = bp;
267 }
268
269 /*
270  * Detach a file from its interface.
271  */
272 static void
273 bpf_detachd(struct bpf_d *d)
274 {
275         int error;
276         struct bpf_if *bp;
277         struct ifnet *ifp;
278
279         bp = d->bd_bif;
280         ifp = bp->bif_ifp;
281
282         /* Remove d from the interface's descriptor list. */
283         SLIST_REMOVE(&bp->bif_dlist, d, bpf_d, bd_next);
284
285         if (SLIST_EMPTY(&bp->bif_dlist)) {
286                 /*
287                  * Let the driver know that there are no more listeners.
288                  */
289                 *bp->bif_driverp = NULL;
290         }
291         d->bd_bif = NULL;
292         /*
293          * Check if this descriptor had requested promiscuous mode.
294          * If so, turn it off.
295          */
296         if (d->bd_promisc) {
297                 d->bd_promisc = 0;
298                 error = ifpromisc(ifp, 0);
299                 if (error != 0 && error != ENXIO) {
300                         /*
301                          * ENXIO can happen if a pccard is unplugged,
302                          * Something is really wrong if we were able to put
303                          * the driver into promiscuous mode, but can't
304                          * take it out.
305                          */
306                         if_printf(ifp, "bpf_detach: ifpromisc failed(%d)\n",
307                                   error);
308                 }
309         }
310 }
311
312 /*
313  * Open ethernet device.  Returns ENXIO for illegal minor device number,
314  * EBUSY if file is open by another process.
315  */
316 /* ARGSUSED */
317 static int
318 bpfopen(struct dev_open_args *ap)
319 {
320         cdev_t dev = ap->a_head.a_dev;
321         struct bpf_d *d;
322
323         if (ap->a_cred->cr_prison)
324                 return(EPERM);
325
326         d = dev->si_drv1;
327         /*
328          * Each minor can be opened by only one process.  If the requested
329          * minor is in use, return EBUSY.
330          */
331         if (d != NULL)
332                 return(EBUSY);
333
334         MALLOC(d, struct bpf_d *, sizeof *d, M_BPF, M_WAITOK | M_ZERO);
335         dev->si_drv1 = d;
336         d->bd_bufsize = bpf_bufsize;
337         d->bd_sig = SIGIO;
338         d->bd_seesent = 1;
339         callout_init(&d->bd_callout);
340         return(0);
341 }
342
343 static int
344 bpfclone(struct dev_clone_args *ap)
345 {
346         int unit;
347
348         unit = devfs_clone_bitmap_get(&DEVFS_CLONE_BITMAP(bpf), 0);
349         ap->a_dev = make_only_dev(&bpf_ops, unit, 0, 0, 0600, "bpf%d", unit);
350
351         return 0;
352 }
353
354 /*
355  * Close the descriptor by detaching it from its interface,
356  * deallocating its buffers, and marking it free.
357  */
358 /* ARGSUSED */
359 static int
360 bpfclose(struct dev_close_args *ap)
361 {
362         cdev_t dev = ap->a_head.a_dev;
363         struct bpf_d *d = dev->si_drv1;
364
365         funsetown(d->bd_sigio);
366         crit_enter();
367         if (d->bd_state == BPF_WAITING)
368                 callout_stop(&d->bd_callout);
369         d->bd_state = BPF_IDLE;
370         if (d->bd_bif != NULL)
371                 bpf_detachd(d);
372         crit_exit();
373         bpf_freed(d);
374         dev->si_drv1 = NULL;
375         if (dev->si_uminor >= BPF_PREALLOCATED_UNITS) {
376                 devfs_clone_bitmap_put(&DEVFS_CLONE_BITMAP(bpf), dev->si_uminor);
377                 destroy_dev(dev);
378         }
379         kfree(d, M_BPF);
380         return(0);
381 }
382
383 /*
384  * Rotate the packet buffers in descriptor d.  Move the store buffer
385  * into the hold slot, and the free buffer into the store slot.
386  * Zero the length of the new store buffer.
387  */
388 #define ROTATE_BUFFERS(d) \
389         (d)->bd_hbuf = (d)->bd_sbuf; \
390         (d)->bd_hlen = (d)->bd_slen; \
391         (d)->bd_sbuf = (d)->bd_fbuf; \
392         (d)->bd_slen = 0; \
393         (d)->bd_fbuf = NULL;
394 /*
395  *  bpfread - read next chunk of packets from buffers
396  */
397 static int
398 bpfread(struct dev_read_args *ap)
399 {
400         cdev_t dev = ap->a_head.a_dev;
401         struct bpf_d *d = dev->si_drv1;
402         int timed_out;
403         int error;
404
405         /*
406          * Restrict application to use a buffer the same size as
407          * as kernel buffers.
408          */
409         if (ap->a_uio->uio_resid != d->bd_bufsize)
410                 return(EINVAL);
411
412         crit_enter();
413         if (d->bd_state == BPF_WAITING)
414                 callout_stop(&d->bd_callout);
415         timed_out = (d->bd_state == BPF_TIMED_OUT);
416         d->bd_state = BPF_IDLE;
417         /*
418          * If the hold buffer is empty, then do a timed sleep, which
419          * ends when the timeout expires or when enough packets
420          * have arrived to fill the store buffer.
421          */
422         while (d->bd_hbuf == NULL) {
423                 if ((d->bd_immediate || timed_out) && d->bd_slen != 0) {
424                         /*
425                          * A packet(s) either arrived since the previous
426                          * read or arrived while we were asleep.
427                          * Rotate the buffers and return what's here.
428                          */
429                         ROTATE_BUFFERS(d);
430                         break;
431                 }
432
433                 /*
434                  * No data is available, check to see if the bpf device
435                  * is still pointed at a real interface.  If not, return
436                  * ENXIO so that the userland process knows to rebind
437                  * it before using it again.
438                  */
439                 if (d->bd_bif == NULL) {
440                         crit_exit();
441                         return(ENXIO);
442                 }
443
444                 if (ap->a_ioflag & IO_NDELAY) {
445                         crit_exit();
446                         return(EWOULDBLOCK);
447                 }
448                 error = tsleep(d, PCATCH, "bpf", d->bd_rtout);
449                 if (error == EINTR || error == ERESTART) {
450                         crit_exit();
451                         return(error);
452                 }
453                 if (error == EWOULDBLOCK) {
454                         /*
455                          * On a timeout, return what's in the buffer,
456                          * which may be nothing.  If there is something
457                          * in the store buffer, we can rotate the buffers.
458                          */
459                         if (d->bd_hbuf)
460                                 /*
461                                  * We filled up the buffer in between
462                                  * getting the timeout and arriving
463                                  * here, so we don't need to rotate.
464                                  */
465                                 break;
466
467                         if (d->bd_slen == 0) {
468                                 crit_exit();
469                                 return(0);
470                         }
471                         ROTATE_BUFFERS(d);
472                         break;
473                 }
474         }
475         /*
476          * At this point, we know we have something in the hold slot.
477          */
478         crit_exit();
479
480         /*
481          * Move data from hold buffer into user space.
482          * We know the entire buffer is transferred since
483          * we checked above that the read buffer is bpf_bufsize bytes.
484          */
485         error = uiomove(d->bd_hbuf, d->bd_hlen, ap->a_uio);
486
487         crit_enter();
488         d->bd_fbuf = d->bd_hbuf;
489         d->bd_hbuf = NULL;
490         d->bd_hlen = 0;
491         crit_exit();
492
493         return(error);
494 }
495
496
497 /*
498  * If there are processes sleeping on this descriptor, wake them up.
499  */
500 static void
501 bpf_wakeup(struct bpf_d *d)
502 {
503         if (d->bd_state == BPF_WAITING) {
504                 callout_stop(&d->bd_callout);
505                 d->bd_state = BPF_IDLE;
506         }
507         wakeup(d);
508         if (d->bd_async && d->bd_sig && d->bd_sigio)
509                 pgsigio(d->bd_sigio, d->bd_sig, 0);
510
511         get_mplock();
512         selwakeup(&d->bd_sel);
513         rel_mplock();
514         /* XXX */
515         d->bd_sel.si_pid = 0;
516 }
517
518 static void
519 bpf_timed_out(void *arg)
520 {
521         struct bpf_d *d = (struct bpf_d *)arg;
522
523         crit_enter();
524         if (d->bd_state == BPF_WAITING) {
525                 d->bd_state = BPF_TIMED_OUT;
526                 if (d->bd_slen != 0)
527                         bpf_wakeup(d);
528         }
529         crit_exit();
530 }
531
532 static void
533 bpf_output_dispatch(struct netmsg *nmsg)
534 {
535         struct netmsg_bpf_output *bmsg = (struct netmsg_bpf_output *)nmsg;
536         struct ifnet *ifp = bmsg->nm_ifp;
537         int error;
538
539         /*
540          * The driver frees the mbuf.
541          */
542         error = ifp->if_output(ifp, bmsg->nm_mbuf, bmsg->nm_dst, NULL);
543         lwkt_replymsg(&nmsg->nm_lmsg, error);
544 }
545
546 static int
547 bpfwrite(struct dev_write_args *ap)
548 {
549         cdev_t dev = ap->a_head.a_dev;
550         struct bpf_d *d = dev->si_drv1;
551         struct ifnet *ifp;
552         struct mbuf *m;
553         int error;
554         struct sockaddr dst;
555         int datlen;
556         struct netmsg_bpf_output bmsg;
557
558         if (d->bd_bif == NULL)
559                 return(ENXIO);
560
561         ifp = d->bd_bif->bif_ifp;
562
563         if (ap->a_uio->uio_resid == 0)
564                 return(0);
565
566         error = bpf_movein(ap->a_uio, (int)d->bd_bif->bif_dlt, &m,
567                            &dst, &datlen, d->bd_wfilter);
568         if (error)
569                 return(error);
570
571         if (datlen > ifp->if_mtu) {
572                 m_freem(m);
573                 return(EMSGSIZE);
574         }
575
576         if (d->bd_hdrcmplt)
577                 dst.sa_family = pseudo_AF_HDRCMPLT;
578
579         netmsg_init(&bmsg.nm_netmsg, &curthread->td_msgport, MSGF_MPSAFE,
580                     bpf_output_dispatch);
581         bmsg.nm_mbuf = m;
582         bmsg.nm_ifp = ifp;
583         bmsg.nm_dst = &dst;
584
585         return lwkt_domsg(cpu_portfn(0), &bmsg.nm_netmsg.nm_lmsg, 0);
586 }
587
588 /*
589  * Reset a descriptor by flushing its packet buffer and clearing the
590  * receive and drop counts.  Should be called at splimp.
591  */
592 static void
593 bpf_resetd(struct bpf_d *d)
594 {
595         if (d->bd_hbuf) {
596                 /* Free the hold buffer. */
597                 d->bd_fbuf = d->bd_hbuf;
598                 d->bd_hbuf = NULL;
599         }
600         d->bd_slen = 0;
601         d->bd_hlen = 0;
602         d->bd_rcount = 0;
603         d->bd_dcount = 0;
604 }
605
606 /*
607  *  FIONREAD            Check for read packet available.
608  *  SIOCGIFADDR         Get interface address - convenient hook to driver.
609  *  BIOCGBLEN           Get buffer len [for read()].
610  *  BIOCSETF            Set ethernet read filter.
611  *  BIOCSETWF           Set ethernet write filter.
612  *  BIOCFLUSH           Flush read packet buffer.
613  *  BIOCPROMISC         Put interface into promiscuous mode.
614  *  BIOCGDLT            Get link layer type.
615  *  BIOCGETIF           Get interface name.
616  *  BIOCSETIF           Set interface.
617  *  BIOCSRTIMEOUT       Set read timeout.
618  *  BIOCGRTIMEOUT       Get read timeout.
619  *  BIOCGSTATS          Get packet stats.
620  *  BIOCIMMEDIATE       Set immediate mode.
621  *  BIOCVERSION         Get filter language version.
622  *  BIOCGHDRCMPLT       Get "header already complete" flag
623  *  BIOCSHDRCMPLT       Set "header already complete" flag
624  *  BIOCGSEESENT        Get "see packets sent" flag
625  *  BIOCSSEESENT        Set "see packets sent" flag
626  *  BIOCLOCK            Set "locked" flag
627  */
628 /* ARGSUSED */
629 static int
630 bpfioctl(struct dev_ioctl_args *ap)
631 {
632         cdev_t dev = ap->a_head.a_dev;
633         struct bpf_d *d = dev->si_drv1;
634         int error = 0;
635
636         crit_enter();
637         if (d->bd_state == BPF_WAITING)
638                 callout_stop(&d->bd_callout);
639         d->bd_state = BPF_IDLE;
640         crit_exit();
641
642         if (d->bd_locked == 1) {
643                 switch (ap->a_cmd) {
644                 case BIOCGBLEN:
645                 case BIOCFLUSH:
646                 case BIOCGDLT:
647                 case BIOCGDLTLIST: 
648                 case BIOCGETIF:
649                 case BIOCGRTIMEOUT:
650                 case BIOCGSTATS:
651                 case BIOCVERSION:
652                 case BIOCGRSIG:
653                 case BIOCGHDRCMPLT:
654                 case FIONREAD:
655                 case BIOCLOCK:
656                 case BIOCSRTIMEOUT:
657                 case BIOCIMMEDIATE:
658                 case TIOCGPGRP:
659                         break;
660                 default:
661                         return (EPERM);
662                 }
663         }
664         switch (ap->a_cmd) {
665         default:
666                 error = EINVAL;
667                 break;
668
669         /*
670          * Check for read packet available.
671          */
672         case FIONREAD:
673                 {
674                         int n;
675
676                         crit_enter();
677                         n = d->bd_slen;
678                         if (d->bd_hbuf)
679                                 n += d->bd_hlen;
680                         crit_exit();
681
682                         *(int *)ap->a_data = n;
683                         break;
684                 }
685
686         case SIOCGIFADDR:
687                 {
688                         struct ifnet *ifp;
689
690                         if (d->bd_bif == NULL) {
691                                 error = EINVAL;
692                         } else {
693                                 ifp = d->bd_bif->bif_ifp;
694                                 ifnet_serialize_all(ifp);
695                                 error = ifp->if_ioctl(ifp, ap->a_cmd,
696                                                       ap->a_data, ap->a_cred);
697                                 ifnet_deserialize_all(ifp);
698                         }
699                         break;
700                 }
701
702         /*
703          * Get buffer len [for read()].
704          */
705         case BIOCGBLEN:
706                 *(u_int *)ap->a_data = d->bd_bufsize;
707                 break;
708
709         /*
710          * Set buffer length.
711          */
712         case BIOCSBLEN:
713                 if (d->bd_bif != NULL) {
714                         error = EINVAL;
715                 } else {
716                         u_int size = *(u_int *)ap->a_data;
717
718                         if (size > bpf_maxbufsize)
719                                 *(u_int *)ap->a_data = size = bpf_maxbufsize;
720                         else if (size < BPF_MINBUFSIZE)
721                                 *(u_int *)ap->a_data = size = BPF_MINBUFSIZE;
722                         d->bd_bufsize = size;
723                 }
724                 break;
725
726         /*
727          * Set link layer read filter.
728          */
729         case BIOCSETF:
730         case BIOCSETWF:
731                 error = bpf_setf(d, (struct bpf_program *)ap->a_data, 
732                         ap->a_cmd);
733                 break;
734
735         /*
736          * Flush read packet buffer.
737          */
738         case BIOCFLUSH:
739                 crit_enter();
740                 bpf_resetd(d);
741                 crit_exit();
742                 break;
743
744         /*
745          * Put interface into promiscuous mode.
746          */
747         case BIOCPROMISC:
748                 if (d->bd_bif == NULL) {
749                         /*
750                          * No interface attached yet.
751                          */
752                         error = EINVAL;
753                         break;
754                 }
755                 crit_enter();
756                 if (d->bd_promisc == 0) {
757                         error = ifpromisc(d->bd_bif->bif_ifp, 1);
758                         if (error == 0)
759                                 d->bd_promisc = 1;
760                 }
761                 crit_exit();
762                 break;
763
764         /*
765          * Get device parameters.
766          */
767         case BIOCGDLT:
768                 if (d->bd_bif == NULL)
769                         error = EINVAL;
770                 else
771                         *(u_int *)ap->a_data = d->bd_bif->bif_dlt;
772                 break;
773
774         /*
775          * Get a list of supported data link types.
776          */
777         case BIOCGDLTLIST:
778                 if (d->bd_bif == NULL) {
779                         error = EINVAL;
780                 } else {
781                         error = bpf_getdltlist(d,
782                                 (struct bpf_dltlist *)ap->a_data);
783                 }
784                 break;
785
786         /*
787          * Set data link type.
788          */
789         case BIOCSDLT:
790                 if (d->bd_bif == NULL)
791                         error = EINVAL;
792                 else
793                         error = bpf_setdlt(d, *(u_int *)ap->a_data);
794                 break;
795
796         /*
797          * Get interface name.
798          */
799         case BIOCGETIF:
800                 if (d->bd_bif == NULL) {
801                         error = EINVAL;
802                 } else {
803                         struct ifnet *const ifp = d->bd_bif->bif_ifp;
804                         struct ifreq *const ifr = (struct ifreq *)ap->a_data;
805
806                         strlcpy(ifr->ifr_name, ifp->if_xname,
807                                 sizeof ifr->ifr_name);
808                 }
809                 break;
810
811         /*
812          * Set interface.
813          */
814         case BIOCSETIF:
815                 error = bpf_setif(d, (struct ifreq *)ap->a_data);
816                 break;
817
818         /*
819          * Set read timeout.
820          */
821         case BIOCSRTIMEOUT:
822                 {
823                         struct timeval *tv = (struct timeval *)ap->a_data;
824
825                         /*
826                          * Subtract 1 tick from tvtohz() since this isn't
827                          * a one-shot timer.
828                          */
829                         if ((error = itimerfix(tv)) == 0)
830                                 d->bd_rtout = tvtohz_low(tv);
831                         break;
832                 }
833
834         /*
835          * Get read timeout.
836          */
837         case BIOCGRTIMEOUT:
838                 {
839                         struct timeval *tv = (struct timeval *)ap->a_data;
840
841                         tv->tv_sec = d->bd_rtout / hz;
842                         tv->tv_usec = (d->bd_rtout % hz) * tick;
843                         break;
844                 }
845
846         /*
847          * Get packet stats.
848          */
849         case BIOCGSTATS:
850                 {
851                         struct bpf_stat *bs = (struct bpf_stat *)ap->a_data;
852
853                         bs->bs_recv = d->bd_rcount;
854                         bs->bs_drop = d->bd_dcount;
855                         break;
856                 }
857
858         /*
859          * Set immediate mode.
860          */
861         case BIOCIMMEDIATE:
862                 d->bd_immediate = *(u_int *)ap->a_data;
863                 break;
864
865         case BIOCVERSION:
866                 {
867                         struct bpf_version *bv = (struct bpf_version *)ap->a_data;
868
869                         bv->bv_major = BPF_MAJOR_VERSION;
870                         bv->bv_minor = BPF_MINOR_VERSION;
871                         break;
872                 }
873
874         /*
875          * Get "header already complete" flag
876          */
877         case BIOCGHDRCMPLT:
878                 *(u_int *)ap->a_data = d->bd_hdrcmplt;
879                 break;
880
881         /*
882          * Set "header already complete" flag
883          */
884         case BIOCSHDRCMPLT:
885                 d->bd_hdrcmplt = *(u_int *)ap->a_data ? 1 : 0;
886                 break;
887
888         /*
889          * Get "see sent packets" flag
890          */
891         case BIOCGSEESENT:
892                 *(u_int *)ap->a_data = d->bd_seesent;
893                 break;
894
895         /*
896          * Set "see sent packets" flag
897          */
898         case BIOCSSEESENT:
899                 d->bd_seesent = *(u_int *)ap->a_data;
900                 break;
901
902         case FIOASYNC:          /* Send signal on receive packets */
903                 d->bd_async = *(int *)ap->a_data;
904                 break;
905
906         case FIOSETOWN:
907                 error = fsetown(*(int *)ap->a_data, &d->bd_sigio);
908                 break;
909
910         case FIOGETOWN:
911                 *(int *)ap->a_data = fgetown(d->bd_sigio);
912                 break;
913
914         /* This is deprecated, FIOSETOWN should be used instead. */
915         case TIOCSPGRP:
916                 error = fsetown(-(*(int *)ap->a_data), &d->bd_sigio);
917                 break;
918
919         /* This is deprecated, FIOGETOWN should be used instead. */
920         case TIOCGPGRP:
921                 *(int *)ap->a_data = -fgetown(d->bd_sigio);
922                 break;
923
924         case BIOCSRSIG:         /* Set receive signal */
925                 {
926                         u_int sig;
927
928                         sig = *(u_int *)ap->a_data;
929
930                         if (sig >= NSIG)
931                                 error = EINVAL;
932                         else
933                                 d->bd_sig = sig;
934                         break;
935                 }
936         case BIOCGRSIG:
937                 *(u_int *)ap->a_data = d->bd_sig;
938                 break;
939         case BIOCLOCK:
940                 d->bd_locked = 1;
941                 break;
942         }
943         return(error);
944 }
945
946 /*
947  * Set d's packet filter program to fp.  If this file already has a filter,
948  * free it and replace it.  Returns EINVAL for bogus requests.
949  */
950 static int
951 bpf_setf(struct bpf_d *d, struct bpf_program *fp, u_long cmd)
952 {
953         struct bpf_insn *fcode, *old;
954         u_int wfilter, flen, size;
955
956         if (cmd == BIOCSETWF) {
957                 old = d->bd_wfilter;
958                 wfilter = 1;
959         } else {
960                 wfilter = 0;
961                 old = d->bd_rfilter;
962         }
963         if (fp->bf_insns == NULL) {
964                 if (fp->bf_len != 0)
965                         return(EINVAL);
966                 crit_enter();
967                 if (wfilter)
968                         d->bd_wfilter = NULL;
969                 else
970                         d->bd_rfilter = NULL;
971                 bpf_resetd(d);
972                 crit_exit();
973                 if (old != NULL)
974                         kfree(old, M_BPF);
975                 return(0);
976         }
977         flen = fp->bf_len;
978         if (flen > BPF_MAXINSNS)
979                 return(EINVAL);
980
981         size = flen * sizeof *fp->bf_insns;
982         fcode = (struct bpf_insn *)kmalloc(size, M_BPF, M_WAITOK);
983         if (copyin(fp->bf_insns, fcode, size) == 0 &&
984             bpf_validate(fcode, (int)flen)) {
985                 crit_enter();
986                 if (wfilter)
987                         d->bd_wfilter = fcode;
988                 else
989                         d->bd_rfilter = fcode;
990                 bpf_resetd(d);
991                 crit_exit();
992                 if (old != NULL)
993                         kfree(old, M_BPF);
994
995                 return(0);
996         }
997         kfree(fcode, M_BPF);
998         return(EINVAL);
999 }
1000
1001 /*
1002  * Detach a file from its current interface (if attached at all) and attach
1003  * to the interface indicated by the name stored in ifr.
1004  * Return an errno or 0.
1005  */
1006 static int
1007 bpf_setif(struct bpf_d *d, struct ifreq *ifr)
1008 {
1009         struct bpf_if *bp;
1010         int error;
1011         struct ifnet *theywant;
1012
1013         theywant = ifunit(ifr->ifr_name);
1014         if (theywant == NULL)
1015                 return(ENXIO);
1016
1017         /*
1018          * Look through attached interfaces for the named one.
1019          */
1020         for (bp = bpf_iflist; bp != NULL; bp = bp->bif_next) {
1021                 struct ifnet *ifp = bp->bif_ifp;
1022
1023                 if (ifp == NULL || ifp != theywant)
1024                         continue;
1025                 /* skip additional entry */
1026                 if (bp->bif_driverp != &ifp->if_bpf)
1027                         continue;
1028                 /*
1029                  * We found the requested interface.
1030                  * If it's not up, return an error.
1031                  * Allocate the packet buffers if we need to.
1032                  * If we're already attached to requested interface,
1033                  * just flush the buffer.
1034                  */
1035                 if (!(ifp->if_flags & IFF_UP))
1036                         return(ENETDOWN);
1037
1038                 if (d->bd_sbuf == NULL) {
1039                         error = bpf_allocbufs(d);
1040                         if (error != 0)
1041                                 return(error);
1042                 }
1043                 crit_enter();
1044                 if (bp != d->bd_bif) {
1045                         if (d->bd_bif != NULL) {
1046                                 /*
1047                                  * Detach if attached to something else.
1048                                  */
1049                                 bpf_detachd(d);
1050                         }
1051
1052                         bpf_attachd(d, bp);
1053                 }
1054                 bpf_resetd(d);
1055                 crit_exit();
1056                 return(0);
1057         }
1058
1059         /* Not found. */
1060         return(ENXIO);
1061 }
1062
1063 /*
1064  * Support for select() and poll() system calls
1065  *
1066  * Return true iff the specific operation will not block indefinitely.
1067  * Otherwise, return false but make a note that a selwakeup() must be done.
1068  */
1069 static int
1070 bpfpoll(struct dev_poll_args *ap)
1071 {
1072         cdev_t dev = ap->a_head.a_dev;
1073         struct bpf_d *d;
1074         int revents;
1075
1076         d = dev->si_drv1;
1077         if (d->bd_bif == NULL)
1078                 return(ENXIO);
1079
1080         revents = ap->a_events & (POLLOUT | POLLWRNORM);
1081         crit_enter();
1082         if (ap->a_events & (POLLIN | POLLRDNORM)) {
1083                 /*
1084                  * An imitation of the FIONREAD ioctl code.
1085                  * XXX not quite.  An exact imitation:
1086                  *      if (d->b_slen != 0 ||
1087                  *          (d->bd_hbuf != NULL && d->bd_hlen != 0)
1088                  */
1089                 if (d->bd_hlen != 0 ||
1090                     ((d->bd_immediate || d->bd_state == BPF_TIMED_OUT) &&
1091                     d->bd_slen != 0)) {
1092                         revents |= ap->a_events & (POLLIN | POLLRDNORM);
1093                 } else {
1094                         selrecord(curthread, &d->bd_sel);
1095                         /* Start the read timeout if necessary. */
1096                         if (d->bd_rtout > 0 && d->bd_state == BPF_IDLE) {
1097                                 callout_reset(&d->bd_callout, d->bd_rtout,
1098                                     bpf_timed_out, d);
1099                                 d->bd_state = BPF_WAITING;
1100                         }
1101                 }
1102         }
1103         crit_exit();
1104         ap->a_events = revents;
1105         return(0);
1106 }
1107
1108 /*
1109  * Process the packet pkt of length pktlen.  The packet is parsed
1110  * by each listener's filter, and if accepted, stashed into the
1111  * corresponding buffer.
1112  */
1113 void
1114 bpf_tap(struct bpf_if *bp, u_char *pkt, u_int pktlen)
1115 {
1116         struct bpf_d *d;
1117         struct timeval tv;
1118         int gottime = 0;
1119         u_int slen;
1120
1121         get_mplock();
1122
1123         /* Re-check */
1124         if (bp == NULL) {
1125                 rel_mplock();
1126                 return;
1127         }
1128
1129         /*
1130          * Note that the ipl does not have to be raised at this point.
1131          * The only problem that could arise here is that if two different
1132          * interfaces shared any data.  This is not the case.
1133          */
1134         SLIST_FOREACH(d, &bp->bif_dlist, bd_next) {
1135                 ++d->bd_rcount;
1136                 slen = bpf_filter(d->bd_rfilter, pkt, pktlen, pktlen);
1137                 if (slen != 0) {
1138                         if (!gottime) {
1139                                 microtime(&tv);
1140                                 gottime = 1;
1141                         }
1142                         catchpacket(d, pkt, pktlen, slen, ovbcopy, &tv);
1143                 }
1144         }
1145
1146         rel_mplock();
1147 }
1148
1149 /*
1150  * Copy data from an mbuf chain into a buffer.  This code is derived
1151  * from m_copydata in sys/uipc_mbuf.c.
1152  */
1153 static void
1154 bpf_mcopy(const void *src_arg, void *dst_arg, size_t len)
1155 {
1156         const struct mbuf *m;
1157         u_int count;
1158         u_char *dst;
1159
1160         m = src_arg;
1161         dst = dst_arg;
1162         while (len > 0) {
1163                 if (m == NULL)
1164                         panic("bpf_mcopy");
1165                 count = min(m->m_len, len);
1166                 bcopy(mtod(m, void *), dst, count);
1167                 m = m->m_next;
1168                 dst += count;
1169                 len -= count;
1170         }
1171 }
1172
1173 /*
1174  * Process the packet in the mbuf chain m.  The packet is parsed by each
1175  * listener's filter, and if accepted, stashed into the corresponding
1176  * buffer.
1177  */
1178 void
1179 bpf_mtap(struct bpf_if *bp, struct mbuf *m)
1180 {
1181         struct bpf_d *d;
1182         u_int pktlen, slen;
1183         struct timeval tv;
1184         int gottime = 0;
1185
1186         get_mplock();
1187
1188         /* Re-check */
1189         if (bp == NULL) {
1190                 rel_mplock();
1191                 return;
1192         }
1193
1194         /* Don't compute pktlen, if no descriptor is attached. */
1195         if (SLIST_EMPTY(&bp->bif_dlist)) {
1196                 rel_mplock();
1197                 return;
1198         }
1199
1200         pktlen = m_lengthm(m, NULL);
1201
1202         SLIST_FOREACH(d, &bp->bif_dlist, bd_next) {
1203                 if (!d->bd_seesent && (m->m_pkthdr.rcvif == NULL))
1204                         continue;
1205                 ++d->bd_rcount;
1206                 slen = bpf_filter(d->bd_rfilter, (u_char *)m, pktlen, 0);
1207                 if (slen != 0) {
1208                         if (!gottime) {
1209                                 microtime(&tv);
1210                                 gottime = 1;
1211                         }
1212                         catchpacket(d, (u_char *)m, pktlen, slen, bpf_mcopy,
1213                                     &tv);
1214                 }
1215         }
1216
1217         rel_mplock();
1218 }
1219
1220 void
1221 bpf_mtap_family(struct bpf_if *bp, struct mbuf *m, sa_family_t family)
1222 {
1223         u_int family4;
1224
1225         KKASSERT(family != AF_UNSPEC);
1226
1227         family4 = (u_int)family;
1228         bpf_ptap(bp, m, &family4, sizeof(family4));
1229 }
1230
1231 /*
1232  * Process the packet in the mbuf chain m with the header in m prepended.
1233  * The packet is parsed by each listener's filter, and if accepted,
1234  * stashed into the corresponding buffer.
1235  */
1236 void
1237 bpf_ptap(struct bpf_if *bp, struct mbuf *m, const void *data, u_int dlen)
1238 {
1239         struct mbuf mb;
1240
1241         /*
1242          * Craft on-stack mbuf suitable for passing to bpf_mtap.
1243          * Note that we cut corners here; we only setup what's
1244          * absolutely needed--this mbuf should never go anywhere else.
1245          */
1246         mb.m_next = m;
1247         mb.m_data = __DECONST(void *, data); /* LINTED */
1248         mb.m_len = dlen;
1249         mb.m_pkthdr.rcvif = m->m_pkthdr.rcvif;
1250
1251         bpf_mtap(bp, &mb);
1252 }
1253
1254 /*
1255  * Move the packet data from interface memory (pkt) into the
1256  * store buffer.  Return 1 if it's time to wakeup a listener (buffer full),
1257  * otherwise 0.  "copy" is the routine called to do the actual data
1258  * transfer.  bcopy is passed in to copy contiguous chunks, while
1259  * bpf_mcopy is passed in to copy mbuf chains.  In the latter case,
1260  * pkt is really an mbuf.
1261  */
1262 static void
1263 catchpacket(struct bpf_d *d, u_char *pkt, u_int pktlen, u_int snaplen,
1264             void (*cpfn)(const void *, void *, size_t),
1265             const struct timeval *tv)
1266 {
1267         struct bpf_hdr *hp;
1268         int totlen, curlen;
1269         int hdrlen = d->bd_bif->bif_hdrlen;
1270         /*
1271          * Figure out how many bytes to move.  If the packet is
1272          * greater or equal to the snapshot length, transfer that
1273          * much.  Otherwise, transfer the whole packet (unless
1274          * we hit the buffer size limit).
1275          */
1276         totlen = hdrlen + min(snaplen, pktlen);
1277         if (totlen > d->bd_bufsize)
1278                 totlen = d->bd_bufsize;
1279
1280         /*
1281          * Round up the end of the previous packet to the next longword.
1282          */
1283         curlen = BPF_WORDALIGN(d->bd_slen);
1284         if (curlen + totlen > d->bd_bufsize) {
1285                 /*
1286                  * This packet will overflow the storage buffer.
1287                  * Rotate the buffers if we can, then wakeup any
1288                  * pending reads.
1289                  */
1290                 if (d->bd_fbuf == NULL) {
1291                         /*
1292                          * We haven't completed the previous read yet,
1293                          * so drop the packet.
1294                          */
1295                         ++d->bd_dcount;
1296                         return;
1297                 }
1298                 ROTATE_BUFFERS(d);
1299                 bpf_wakeup(d);
1300                 curlen = 0;
1301         } else if (d->bd_immediate || d->bd_state == BPF_TIMED_OUT) {
1302                 /*
1303                  * Immediate mode is set, or the read timeout has
1304                  * already expired during a select call.  A packet
1305                  * arrived, so the reader should be woken up.
1306                  */
1307                 bpf_wakeup(d);
1308         }
1309
1310         /*
1311          * Append the bpf header.
1312          */
1313         hp = (struct bpf_hdr *)(d->bd_sbuf + curlen);
1314         hp->bh_tstamp = *tv;
1315         hp->bh_datalen = pktlen;
1316         hp->bh_hdrlen = hdrlen;
1317         /*
1318          * Copy the packet data into the store buffer and update its length.
1319          */
1320         (*cpfn)(pkt, (u_char *)hp + hdrlen, (hp->bh_caplen = totlen - hdrlen));
1321         d->bd_slen = curlen + totlen;
1322 }
1323
1324 /*
1325  * Initialize all nonzero fields of a descriptor.
1326  */
1327 static int
1328 bpf_allocbufs(struct bpf_d *d)
1329 {
1330         d->bd_fbuf = kmalloc(d->bd_bufsize, M_BPF, M_WAITOK);
1331         d->bd_sbuf = kmalloc(d->bd_bufsize, M_BPF, M_WAITOK);
1332         d->bd_slen = 0;
1333         d->bd_hlen = 0;
1334         return(0);
1335 }
1336
1337 /*
1338  * Free buffers and packet filter program currently in use by a descriptor.
1339  * Called on close.
1340  */
1341 static void
1342 bpf_freed(struct bpf_d *d)
1343 {
1344         /*
1345          * We don't need to lock out interrupts since this descriptor has
1346          * been detached from its interface and it yet hasn't been marked
1347          * free.
1348          */
1349         if (d->bd_sbuf != NULL) {
1350                 kfree(d->bd_sbuf, M_BPF);
1351                 if (d->bd_hbuf != NULL)
1352                         kfree(d->bd_hbuf, M_BPF);
1353                 if (d->bd_fbuf != NULL)
1354                         kfree(d->bd_fbuf, M_BPF);
1355         }
1356         if (d->bd_rfilter)
1357                 kfree(d->bd_rfilter, M_BPF);
1358         if (d->bd_wfilter)
1359                 kfree(d->bd_wfilter, M_BPF);
1360 }
1361
1362 /*
1363  * Attach an interface to bpf.  ifp is a pointer to the structure
1364  * defining the interface to be attached, dlt is the link layer type,
1365  * and hdrlen is the fixed size of the link header (variable length
1366  * headers are not yet supported).
1367  */
1368 void
1369 bpfattach(struct ifnet *ifp, u_int dlt, u_int hdrlen)
1370 {
1371         bpfattach_dlt(ifp, dlt, hdrlen, &ifp->if_bpf);
1372 }
1373
1374 void
1375 bpfattach_dlt(struct ifnet *ifp, u_int dlt, u_int hdrlen, struct bpf_if **driverp)
1376 {
1377         struct bpf_if *bp;
1378
1379         bp = kmalloc(sizeof *bp, M_BPF, M_WAITOK | M_ZERO);
1380
1381         SLIST_INIT(&bp->bif_dlist);
1382         bp->bif_ifp = ifp;
1383         bp->bif_dlt = dlt;
1384         bp->bif_driverp = driverp;
1385         *bp->bif_driverp = NULL;
1386
1387         bp->bif_next = bpf_iflist;
1388         bpf_iflist = bp;
1389
1390         /*
1391          * Compute the length of the bpf header.  This is not necessarily
1392          * equal to SIZEOF_BPF_HDR because we want to insert spacing such
1393          * that the network layer header begins on a longword boundary (for
1394          * performance reasons and to alleviate alignment restrictions).
1395          */
1396         bp->bif_hdrlen = BPF_WORDALIGN(hdrlen + SIZEOF_BPF_HDR) - hdrlen;
1397
1398         if (bootverbose)
1399                 if_printf(ifp, "bpf attached\n");
1400 }
1401
1402 /*
1403  * Detach bpf from an interface.  This involves detaching each descriptor
1404  * associated with the interface, and leaving bd_bif NULL.  Notify each
1405  * descriptor as it's detached so that any sleepers wake up and get
1406  * ENXIO.
1407  */
1408 void
1409 bpfdetach(struct ifnet *ifp)
1410 {
1411         struct bpf_if *bp, *bp_prev;
1412         struct bpf_d *d;
1413
1414         crit_enter();
1415
1416         /* Locate BPF interface information */
1417         bp_prev = NULL;
1418         for (bp = bpf_iflist; bp != NULL; bp = bp->bif_next) {
1419                 if (ifp == bp->bif_ifp)
1420                         break;
1421                 bp_prev = bp;
1422         }
1423
1424         /* Interface wasn't attached */
1425         if (bp->bif_ifp == NULL) {
1426                 crit_exit();
1427                 kprintf("bpfdetach: %s was not attached\n", ifp->if_xname);
1428                 return;
1429         }
1430
1431         while ((d = SLIST_FIRST(&bp->bif_dlist)) != NULL) {
1432                 bpf_detachd(d);
1433                 bpf_wakeup(d);
1434         }
1435
1436         if (bp_prev != NULL)
1437                 bp_prev->bif_next = bp->bif_next;
1438         else
1439                 bpf_iflist = bp->bif_next;
1440
1441         kfree(bp, M_BPF);
1442
1443         crit_exit();
1444 }
1445
1446 /*
1447  * Get a list of available data link type of the interface.
1448  */
1449 static int
1450 bpf_getdltlist(struct bpf_d *d, struct bpf_dltlist *bfl)
1451 {
1452         int n, error;
1453         struct ifnet *ifp;
1454         struct bpf_if *bp;
1455
1456         ifp = d->bd_bif->bif_ifp;
1457         n = 0;
1458         error = 0;
1459         for (bp = bpf_iflist; bp != NULL; bp = bp->bif_next) {
1460                 if (bp->bif_ifp != ifp)
1461                         continue;
1462                 if (bfl->bfl_list != NULL) {
1463                         if (n >= bfl->bfl_len) {
1464                                 return (ENOMEM);
1465                         }
1466                         error = copyout(&bp->bif_dlt,
1467                             bfl->bfl_list + n, sizeof(u_int));
1468                 }
1469                 n++;
1470         }
1471         bfl->bfl_len = n;
1472         return(error);
1473 }
1474
1475 /*
1476  * Set the data link type of a BPF instance.
1477  */
1478 static int
1479 bpf_setdlt(struct bpf_d *d, u_int dlt)
1480 {
1481         int error, opromisc;
1482         struct ifnet *ifp;
1483         struct bpf_if *bp;
1484
1485         if (d->bd_bif->bif_dlt == dlt)
1486                 return (0);
1487         ifp = d->bd_bif->bif_ifp;
1488         for (bp = bpf_iflist; bp != NULL; bp = bp->bif_next) {
1489                 if (bp->bif_ifp == ifp && bp->bif_dlt == dlt)
1490                         break;
1491         }
1492         if (bp != NULL) {
1493                 opromisc = d->bd_promisc;
1494                 crit_enter();
1495                 bpf_detachd(d);
1496                 bpf_attachd(d, bp);
1497                 bpf_resetd(d);
1498                 if (opromisc) {
1499                         error = ifpromisc(bp->bif_ifp, 1);
1500                         if (error) {
1501                                 if_printf(bp->bif_ifp,
1502                                         "bpf_setdlt: ifpromisc failed (%d)\n",
1503                                         error);
1504                         } else {
1505                                 d->bd_promisc = 1;
1506                         }
1507                 }
1508                 crit_exit();
1509         }
1510         return(bp == NULL ? EINVAL : 0);
1511 }
1512
1513 static void
1514 bpf_drvinit(void *unused)
1515 {
1516         int i;
1517
1518         make_autoclone_dev(&bpf_ops, &DEVFS_CLONE_BITMAP(bpf),
1519                 bpfclone, 0, 0, 0600, "bpf");
1520         for (i = 0; i < BPF_PREALLOCATED_UNITS; i++) {
1521                 make_dev(&bpf_ops, i, 0, 0, 0600, "bpf%d", i);
1522                 devfs_clone_bitmap_set(&DEVFS_CLONE_BITMAP(bpf), i);
1523         }
1524 }
1525
1526 static void
1527 bpf_drvuninit(void *unused)
1528 {
1529         devfs_clone_handler_del("bpf");
1530         dev_ops_remove_all(&bpf_ops);
1531         devfs_clone_bitmap_uninit(&DEVFS_CLONE_BITMAP(bpf));
1532 }
1533
1534 SYSINIT(bpfdev,SI_SUB_DRIVERS,SI_ORDER_MIDDLE+CDEV_MAJOR,bpf_drvinit,NULL)
1535 SYSUNINIT(bpfdev, SI_SUB_DRIVERS,SI_ORDER_MIDDLE+CDEV_MAJOR,bpf_drvuninit, NULL);
1536
1537 #else /* !BPF */
1538 /*
1539  * NOP stubs to allow bpf-using drivers to load and function.
1540  *
1541  * A 'better' implementation would allow the core bpf functionality
1542  * to be loaded at runtime.
1543  */
1544
1545 void
1546 bpf_tap(struct bpf_if *bp, u_char *pkt, u_int pktlen)
1547 {
1548 }
1549
1550 void
1551 bpf_mtap(struct bpf_if *bp, struct mbuf *m)
1552 {
1553 }
1554
1555 void
1556 bpf_ptap(struct bpf_if *bp, struct mbuf *m, const void *data, u_int dlen)
1557 {
1558 }
1559
1560 void
1561 bpfattach(struct ifnet *ifp, u_int dlt, u_int hdrlen)
1562 {
1563 }
1564
1565 void
1566 bpfattach_dlt(struct ifnet *ifp, u_int dlt, u_int hdrlen, struct bpf_if **driverp)
1567 {
1568 }
1569
1570 void
1571 bpfdetach(struct ifnet *ifp)
1572 {
1573 }
1574
1575 u_int
1576 bpf_filter(const struct bpf_insn *pc, u_char *p, u_int wirelen, u_int buflen)
1577 {
1578         return -1;      /* "no filter" behaviour */
1579 }
1580
1581 #endif /* !BPF */