Merge from vendor branch LIBARCHIVE:
[dragonfly.git] / sys / kern / vfs_init.c
1 /*
2  * Copyright (c) 2003,2004 The DragonFly Project.  All rights reserved.
3  * 
4  * This code is derived from software contributed to The DragonFly Project
5  * by Matthew Dillon <dillon@backplane.com>
6  * 
7  * Redistribution and use in source and binary forms, with or without
8  * modification, are permitted provided that the following conditions
9  * are met:
10  * 
11  * 1. Redistributions of source code must retain the above copyright
12  *    notice, this list of conditions and the following disclaimer.
13  * 2. Redistributions in binary form must reproduce the above copyright
14  *    notice, this list of conditions and the following disclaimer in
15  *    the documentation and/or other materials provided with the
16  *    distribution.
17  * 3. Neither the name of The DragonFly Project nor the names of its
18  *    contributors may be used to endorse or promote products derived
19  *    from this software without specific, prior written permission.
20  * 
21  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
22  * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
23  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
24  * FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE
25  * COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
26  * INCIDENTAL, SPECIAL, EXEMPLARY OR CONSEQUENTIAL DAMAGES (INCLUDING,
27  * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
28  * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
29  * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
30  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
31  * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
32  * SUCH DAMAGE.
33  *
34  *
35  * Copyright (c) 1989, 1993
36  *      The Regents of the University of California.  All rights reserved.
37  *
38  * This code is derived from software contributed
39  * to Berkeley by John Heidemann of the UCLA Ficus project.
40  *
41  * Source: * @(#)i405_init.c 2.10 92/04/27 UCLA Ficus project
42  *
43  * Redistribution and use in source and binary forms, with or without
44  * modification, are permitted provided that the following conditions
45  * are met:
46  * 1. Redistributions of source code must retain the above copyright
47  *    notice, this list of conditions and the following disclaimer.
48  * 2. Redistributions in binary form must reproduce the above copyright
49  *    notice, this list of conditions and the following disclaimer in the
50  *    documentation and/or other materials provided with the distribution.
51  * 3. All advertising materials mentioning features or use of this software
52  *    must display the following acknowledgement:
53  *      This product includes software developed by the University of
54  *      California, Berkeley and its contributors.
55  * 4. Neither the name of the University nor the names of its contributors
56  *    may be used to endorse or promote products derived from this software
57  *    without specific prior written permission.
58  *
59  * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
60  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
61  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
62  * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
63  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
64  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
65  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
66  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
67  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
68  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
69  * SUCH DAMAGE.
70  *
71  *      @(#)vfs_init.c  8.3 (Berkeley) 1/4/94
72  * $FreeBSD: src/sys/kern/vfs_init.c,v 1.59 2002/04/30 18:44:32 dillon Exp $
73  * $DragonFly: src/sys/kern/vfs_init.c,v 1.7 2004/10/12 19:20:46 dillon Exp $
74  */
75 /*
76  * Manage vnode VOP operations vectors
77  */
78 #include <sys/param.h>
79 #include <sys/systm.h>
80 #include <sys/kernel.h>
81 #include <sys/mount.h>
82 #include <sys/sysctl.h>
83 #include <sys/vnode.h>
84 #include <sys/malloc.h>
85 #include <vm/vm_zone.h>
86
87 static MALLOC_DEFINE(M_VNODEOP, "vnodeops", "vnode operations vectors");
88
89 /*
90  * Zone for namei
91  */
92 struct vm_zone *namei_zone;
93
94 /*
95  * vfs_init() will set maxvfsconf
96  * to the highest defined type number.
97  */
98 int maxvfsconf;
99 struct vfsconf *vfsconf;
100
101 static TAILQ_HEAD(, vnodeopv_node) vnodeopv_list;
102 static void vfs_recalc_vnodeops(void);
103
104 /*
105  * Add a vnode operations (vnops) vector to the global list.
106  */
107 void
108 vfs_add_vnodeops_sysinit(const void *data)
109 {
110         const struct vnodeopv_desc *vdesc = data;
111
112         vfs_add_vnodeops(vdesc->opv_desc_vector, vdesc->opv_desc_ops);
113 }
114
115 /*
116  * Unlink previously added vnode operations vector.
117  */
118 void
119 vfs_rm_vnodeops_sysinit(const void *data)
120 {
121         const struct vnodeopv_desc *vdesc = data;
122
123         vfs_rm_vnodeops(vdesc->opv_desc_vector);
124 }
125
126 void
127 vfs_add_vnodeops(struct vop_ops **vops_pp, struct vnodeopv_entry_desc *descs)
128 {
129         struct vnodeopv_node *node;
130         struct vop_ops *ops;
131
132         node = malloc(sizeof(*node), M_VNODEOP, M_ZERO|M_WAITOK);
133         if ((ops = *vops_pp) == NULL) {
134                 ops = malloc(sizeof(struct vop_ops),
135                                 M_VNODEOP, M_ZERO|M_WAITOK);
136                 *vops_pp = ops;
137         }
138         node->ops = ops;
139         node->descs = descs;
140         ++ops->vv_refs;
141         TAILQ_INSERT_TAIL(&vnodeopv_list, node, entry);
142         vfs_recalc_vnodeops();
143 }
144
145 void
146 vfs_rm_vnodeops(struct vop_ops **vops_pp)
147 {
148         struct vop_ops *ops = *vops_pp;
149         struct vnodeopv_node *node;
150
151         if (ops == NULL)
152                 return;
153
154         TAILQ_FOREACH(node, &vnodeopv_list, entry) {
155                 if (node->ops == ops)
156                         break;
157         }
158         if (node == NULL) {
159                 printf("vfs_rm_vnodeops: unable to find ops: %p\n", ops);
160                 return;
161         }
162         TAILQ_REMOVE(&vnodeopv_list, node, entry);
163         free(node, M_VNODEOP);
164         KKASSERT(ops != NULL && ops->vv_refs > 0);
165         if (--ops->vv_refs == 0) {
166                 *vops_pp = NULL;
167                 free(ops, M_VNODEOP);
168         }
169         vfs_recalc_vnodeops();
170 }
171
172 /*
173  * Recalculate VFS operations vectors
174  */
175 static void
176 vfs_recalc_vnodeops(void)
177 {
178         struct vnodeopv_node *node;
179         struct vnodeopv_entry_desc *desc;
180         struct vop_ops *ops;
181         struct vop_ops *vnew;
182         int off;
183
184         /*
185          * Because vop_ops may be active we can't just blow them away, we
186          * have to generate new vop_ops and then copy them into the running
187          * vop_ops.  Any missing entries will be assigned to the default
188          * entry.  If the default entry itself is missing it will be assigned
189          * to vop_eopnotsupp.
190          */
191         TAILQ_FOREACH(node, &vnodeopv_list, entry) {
192                 ops = node->ops;
193                 if ((vnew = ops->vv_new) == NULL) {
194                         vnew = malloc(sizeof(struct vop_ops),
195                                         M_VNODEOP, M_ZERO|M_WAITOK);
196                         ops->vv_new = vnew;
197                         vnew->vop_default = vop_eopnotsupp;
198                 }
199                 for (desc = node->descs; desc->opve_op; ++desc) {
200                         off = desc->opve_op->vdesc_offset;
201                         *(void **)((char *)vnew + off) = desc->opve_func;
202                 }
203                 for (off = __offsetof(struct vop_ops, vop_ops_first_field);
204                      off <= __offsetof(struct vop_ops, vop_ops_last_field);
205                      off += sizeof(void **)
206                 ) {
207                         if (*(void **)((char *)vnew + off) == NULL)
208                             *(void **)((char *)vnew + off) = vnew->vop_default;
209                 }
210         }
211
212         /*
213          * Copy the temporary ops into the running configuration and then
214          * delete them.
215          */
216         TAILQ_FOREACH(node, &vnodeopv_list, entry) {
217                 ops = node->ops;
218                 if ((vnew = ops->vv_new) == NULL)
219                         continue;
220                 for (off = __offsetof(struct vop_ops, vop_ops_first_field);
221                      off <= __offsetof(struct vop_ops, vop_ops_last_field);
222                      off += sizeof(void **)
223                 ) {
224                         *(void **)((char *)ops + off) = 
225                                 *(void **)((char *)vnew + off);
226                 }
227                 ops->vv_new = NULL;
228                 free(vnew, M_VNODEOP);
229         }
230 }
231
232 /*
233  * Routines having to do with the management of the vnode table.
234  */
235 struct vattr va_null;
236
237 /*
238  * Initialize the vnode structures and initialize each file system type.
239  */
240 /* ARGSUSED*/
241 static void
242 vfsinit(void *dummy)
243 {
244         TAILQ_INIT(&vnodeopv_list);
245         namei_zone = zinit("NAMEI", MAXPATHLEN, 0, 0, 2);
246
247         /*
248          * Initialize the vnode table
249          */
250         vfs_subr_init();
251         vfs_mount_init();
252         vfs_lock_init();
253         vfs_sync_init();
254         /*
255          * Initialize the vnode name cache
256          */
257         nchinit();
258         /*
259          * Initialize each file system type.
260          * Vfs type numbers must be distinct from VFS_GENERIC (and VFS_VFSCONF).
261          */
262         vattr_null(&va_null);
263         maxvfsconf = VFS_GENERIC + 1;
264 }
265 SYSINIT(vfs, SI_SUB_VFS, SI_ORDER_FIRST, vfsinit, NULL)
266
267 /*
268  * Register a VFS.
269  *
270  * After doing general initialisation, this function will
271  * call the filesystem specific initialisation vector op,
272  * i.e. vfsops->vfs_init().
273  */
274 int
275 vfs_register(struct vfsconf *vfc)
276 {
277         struct sysctl_oid *oidp;
278         struct vfsconf *vfsp;
279
280         vfsp = NULL;
281         if (vfsconf)
282                 for (vfsp = vfsconf; vfsp->vfc_next; vfsp = vfsp->vfc_next)
283                         if (strcmp(vfc->vfc_name, vfsp->vfc_name) == 0)
284                                 return EEXIST;
285
286         vfc->vfc_typenum = maxvfsconf++;
287         if (vfsp)
288                 vfsp->vfc_next = vfc;
289         else
290                 vfsconf = vfc;
291         vfc->vfc_next = NULL;
292
293         /*
294          * If this filesystem has a sysctl node under vfs
295          * (i.e. vfs.xxfs), then change the oid number of that node to 
296          * match the filesystem's type number.  This allows user code
297          * which uses the type number to read sysctl variables defined
298          * by the filesystem to continue working. Since the oids are
299          * in a sorted list, we need to make sure the order is
300          * preserved by re-registering the oid after modifying its
301          * number.
302          */
303         SLIST_FOREACH(oidp, &sysctl__vfs_children, oid_link)
304                 if (strcmp(oidp->oid_name, vfc->vfc_name) == 0) {
305                         sysctl_unregister_oid(oidp);
306                         oidp->oid_number = vfc->vfc_typenum;
307                         sysctl_register_oid(oidp);
308                 }
309
310         /*
311          * Call init function for this VFS...
312          */
313         (*(vfc->vfc_vfsops->vfs_init))(vfc);
314
315         return 0;
316 }
317
318
319 /*
320  * Remove previously registered VFS.
321  *
322  * After doing general de-registration like removing sysctl
323  * nodes etc, it will call the filesystem specific vector
324  * op, i.e. vfsops->vfs_uninit().
325  * 
326  */
327 int
328 vfs_unregister(struct vfsconf *vfc)
329 {
330         struct vfsconf *vfsp, *prev_vfsp;
331         int error, i, maxtypenum;
332
333         i = vfc->vfc_typenum;
334
335         prev_vfsp = NULL;
336         for (vfsp = vfsconf; vfsp;
337                         prev_vfsp = vfsp, vfsp = vfsp->vfc_next) {
338                 if (!strcmp(vfc->vfc_name, vfsp->vfc_name))
339                         break;
340         }
341         if (vfsp == NULL)
342                 return EINVAL;
343         if (vfsp->vfc_refcount)
344                 return EBUSY;
345         if (vfc->vfc_vfsops->vfs_uninit != NULL) {
346                 error = (*vfc->vfc_vfsops->vfs_uninit)(vfsp);
347                 if (error)
348                         return (error);
349         }
350         if (prev_vfsp)
351                 prev_vfsp->vfc_next = vfsp->vfc_next;
352         else
353                 vfsconf = vfsp->vfc_next;
354         maxtypenum = VFS_GENERIC;
355         for (vfsp = vfsconf; vfsp != NULL; vfsp = vfsp->vfc_next)
356                 if (maxtypenum < vfsp->vfc_typenum)
357                         maxtypenum = vfsp->vfc_typenum;
358         maxvfsconf = maxtypenum + 1;
359         return 0;
360 }
361
362 int
363 vfs_modevent(module_t mod, int type, void *data)
364 {
365         struct vfsconf *vfc;
366         int error = 0;
367
368         vfc = (struct vfsconf *)data;
369
370         switch (type) {
371         case MOD_LOAD:
372                 if (vfc)
373                         error = vfs_register(vfc);
374                 break;
375
376         case MOD_UNLOAD:
377                 if (vfc)
378                         error = vfs_unregister(vfc);
379                 break;
380         default:        /* including MOD_SHUTDOWN */
381                 break;
382         }
383         return (error);
384 }