2 # GENERIC_SMP -- Generic kernel configuration file for DragonFly/i386
4 # Check the LINT configuration file in sys/config, for an
5 # exhaustive list of options.
16 makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols
18 options MATH_EMULATE #Support for x87 emulation
19 options INET #InterNETworking
20 options INET6 #IPv6 communications protocols
21 options HAMMER #Hammer Filesystem
22 options NULLFS #NULL filesystem
23 options FFS #Berkeley Fast Filesystem
24 options FFS_ROOT #FFS usable as root device [keep this!]
25 options SOFTUPDATES #Enable FFS soft updates support
26 options UFS_DIRHASH #Improve performance on big directories
27 options MFS #Memory Filesystem
28 options TMPFS #Temporary Filesystem
29 options MD_ROOT #MD is a potential root device
30 options NFS #Network Filesystem
31 options NFS_ROOT #NFS usable as root device, NFS required
32 options MSDOSFS #MSDOS Filesystem
33 options CD9660 #ISO 9660 Filesystem
34 options PROCFS #Process filesystem
35 options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!]
36 options COMPAT_DF12 #Compatible with DragonFly 1.2 and earlier
37 options SCSI_DELAY=5000 #Delay (in ms) before probing SCSI
38 options DEVICE_POLLING # Support mixed interrupt-polling
39 # handling of network device drivers
40 options UCONSOLE #Allow users to grab the console
41 options USERCONFIG #boot -c editor
42 options VISUAL_USERCONFIG #visual boot -c editor
43 options KTRACE #ktrace(1) support
44 options SYSVSHM #SYSV-style shared memory
45 options SYSVMSG #SYSV-style message queues
46 options SYSVSEM #SYSV-style semaphores
47 options P1003_1B #Posix P1003_1B real-time extensions
48 options _KPOSIX_PRIORITY_SCHEDULING
49 options ICMP_BANDLIM #Rate limit bad replies
50 options KBD_INSTALL_CDEV # install a CDEV entry in /dev
51 options AHC_REG_PRETTY_PRINT # Print register bitfields in debug
52 # output. Adds ~128k to driver.
53 options AHD_REG_PRETTY_PRINT # Print register bitfields in debug
54 # output. Adds ~215k to driver.
55 options DSCHED_FQ # Fair-queuing disk scheduler
58 options ALTQ #alternate queueing
59 options ALTQ_CBQ #class based queueing
60 options ALTQ_RED #random early detection
61 options ALTQ_RIO #triple red for diffserv (needs RED)
62 options ALTQ_HFSC #hierarchical fair service curve
63 options ALTQ_PRIQ #priority queue
64 options ALTQ_FAIRQ #fair queueing
65 #options ALTQ_NOPCC #don't use processor cycle counter
66 #options ALTQ_DEBUG #for debugging
68 options SMP # Symmetric MultiProcessor Kernel
70 # Debugging for Development
80 device fdc0 at isa? port IO_FD1 irq 6 drq 2
81 device fd0 at fdc0 drive 0
82 device fd1 at fdc0 drive 1
84 # If you have a Toshiba Libretto with its Y-E Data PCMCIA floppy,
85 # don't use the above line for fdc0 but the following one:
88 # AHCI driver, this will override NATA for AHCI devices,
89 # both drivers may be included.
97 # NEW-ATA (NATA) and ATAPI devices
100 device natadisk # ATA disk drives
101 device natapicd # ATAPI CDROM drives
102 device natapifd # ATAPI floppy drives
103 device natapist # ATAPI tape drives
104 device natapicam # Emulate ATAPI devices as SCSI
105 device nataraid # support for ATA software RAID
107 device natausb # ATA-over-USB support
108 options ATA_STATIC_ID # Static device numbering
110 # LEGACY ATA and ATAPI devices
111 #device ata0 at isa? port IO_WD1 irq 14
112 #device ata1 at isa? port IO_WD2 irq 15
114 #device atadisk # ATA disk drives
115 #device atapicd # ATAPI CDROM drives
116 #device atapifd # ATAPI floppy drives
117 #device atapist # ATAPI tape drives
118 #device atapicam # Emulate ATAPI devices as SCSI via CAM
119 #options ATA_STATIC_ID #Static device numbering
122 device ahb # EISA AHA1742 family
123 device ahc # AHA2940 and onboard AIC7xxx devices
124 device ahd # AHA39320/29320 and onboard AIC79xx devices
125 device amd # AMD 53C974 (Tekram DC-390(T))
126 device isp # Qlogic family
127 device mpt # LSI-Logic MPT/Fusion
128 device ncr # NCR/Symbios Logic
129 device sym # NCR/Symbios Logic (newer chipsets)
130 options SYM_SETUP_LP_PROBE_MAP=0x40
131 # Allow ncr to attach legacy NCR devices when
132 # both sym and ncr are configured
140 device ncv # NCR 53C500
141 device nsp # Workbit Ninja SCSI-3
142 device stg # TMC 18C30/18C50
145 device scbus # SCSI bus (required)
146 device da # Direct Access (disks)
147 device sa # Sequential Access (tape etc)
149 device pass # Passthrough device (direct SCSI access)
150 device sg # Passthrough device (linux scsi generic)
152 # RAID controllers interfaced to the SCSI subsystem
153 device asr # DPT SmartRAID V, VI and Adaptec SCSI RAID
154 device dpt # DPT Smartcache - See LINT for options!
155 device iir # Intel Integrated RAID
156 device mly # Mylex AcceleRAID/eXtremeRAID
157 device ciss # Compaq SmartRAID 5* series
160 device aac # Adaptec FSA RAID, Dell PERC2/PERC3
161 #device aacp # SCSI passthrough for aac (requires CAM)
162 device ida # Compaq Smart RAID
163 device ips # IBM ServeRAID
164 device amr # AMI MegaRAID
165 device mlx # Mylex DAC960 family
166 device twe # 3ware Escalade 7000/8000's
167 device twa # 3ware 9000 series PATA/SATA RAID
168 device pst # Promise Supertrack
171 # Areca RAID (CAM is required).
173 device arcmsr # Areca SATA II RAID
175 # atkbdc0 controls both the keyboard and the PS/2 mouse
176 device atkbdc0 at isa? port IO_KBD
177 device atkbd0 at atkbdc? irq 1 flags 0x1
178 device psm0 at atkbdc? irq 12
182 # kbdmux is the keyboard multiplexer
185 # splash screen/screen saver
188 # syscons is the default console driver, resembling an SCO console
189 device sc0 at isa? flags 0x100
190 options SC_PIXEL_MODE # add support for the raster text mode
192 device agp # support several AGP chipsets
194 # Floating point support - do not disable.
195 device npx0 at nexus? port IO_NPX irq 13
197 # Power management support (see LINT for more options)
198 device apm0 at nexus? disable flags 0x20 # Advanced Power Management
200 # HW monitoring devices
201 device aps0 at isa? port 0x1600
202 device lm0 at isa? port 0x290
203 device it0 at isa? port 0x290
204 device it1 at isa? port 0xc00
205 device it2 at isa? port 0xd00
206 device it3 at isa? port 0x228
207 device wbsio0 at isa? port 0x2e
208 device wbsio1 at isa? port 0x4e
209 device lm#3 at wbsio?
211 # PCCARD (PCMCIA) support
217 device sio0 at isa? port IO_COM1 flags 0x10 irq 4
218 device sio1 at isa? port IO_COM2 irq 3
219 device sio2 at isa? disable port IO_COM3 irq 5
220 device sio3 at isa? disable port IO_COM4 irq 9
223 device ppc0 at isa? irq 7
224 device ppbus # Parallel port bus (required)
226 device plip # TCP/IP over parallel
227 device ppi # Parallel port interface device
228 #device vpo # Requires scbus and da
231 device de # DEC/Intel DC21x4x (``Tulip'')
232 device txp # 3Com 3cR990 (``Typhoon'')
233 device vx # 3Com 3c590, 3c595 (``Vortex'')
235 device em # Intel PRO/1000 adapter Gigabit Ethernet Card (``Wiseman'')
237 device ig_hal # Intel PRO/1000 hardware abstraction layer
239 # PCI Ethernet NICs that use the common MII bus controller code.
240 # NOTE: Be sure to keep the 'device miibus' line in order to use these NICs!
241 device miibus # MII bus support
242 device ae # Attansic/Atheros L2 Fast Ethernet
243 device age # Attansic/Atheros L1 Gigabit Ethernet
244 device alc # Atheros AR8131/AR8132
245 device ale # Atheros AR8121/AR8113/AR8114
246 device bce # Broadcom NetXtreme II Gigabit Ethernet
247 device bfe # Broadcom BCM440x 10/100 Ethernet
248 device dc # DEC/Intel 21143 and various workalikes
249 device et # Agere ET1310 10/100/1000 Ethernet
250 device fxp # Intel EtherExpress PRO/100B (82557, 82558)
251 device jme # JMicron Gigabit/Fast Ethernet
252 device pcn # AMD Am79C97x PCI 10/100 NICs
253 device rl # RealTek 8129/8139
254 device re # RealTek 8139C+/8169
255 device sf # Adaptec AIC-6915 (``Starfire'')
256 device sis # Silicon Integrated Systems SiS 900/SiS 7016
257 device sk # SysKonnect GEnesis, LinkSys EG1023, D-Link
258 device ste # Sundance ST201 (D-Link DFE-550TX)
259 device tl # Texas Instruments ThunderLAN
260 device tx # SMC EtherPower II (83c170 ``EPIC'')
261 device vge # VIA 612x GigE
262 device vr # VIA Rhine, Rhine II
263 device wb # Winbond W89C840F
264 device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'')
265 device bge # Broadcom BCM570x (``Tigon III'')
266 device stge # Sundance/Tamarack TC9021 Gigabit Ethernet
267 device msk # Marvell/SysKonnect Yukon II Gigabit Ethernet
268 device nfe # NVIDIA nForce MCP 10/100/Gigabit Ethernet
271 # 'device ed' requires 'device miibus'
272 device ed0 at isa? disable port 0x280 irq 10 iomem 0xd8000
275 device fe0 at isa? disable port 0x300
280 options IEEE80211_DEBUG #enable debugging msgs
281 options IEEE80211_SUPPORT_MESH #enable 802.11s D3.0 support
282 options IEEE80211_SUPPORT_TDMA #enable TDMA support
283 device wlan # 802.11 support
284 device wlan_ccmp # 802.11 CCMP support
285 device wlan_tkip # 802.11 TKIP support
286 device wlan_wep # 802.11 WEP support
287 #device wlan_amrr # AMRR
289 # All wireless NICs require wlan and wlan_amrr
290 # Aironet 4500/4800 802.11 wireless NICs. Note: the declaration below will
291 # work for PCMCIA and PCI cards, as well as ISA cards set to ISA PnP
292 # mode (the factory default). If you set the switches on your ISA
293 # card for a manually chosen I/O address and IRQ, you must specify
294 # those parameters here.
296 device ral # Ralink Technology 802.11 wireless NIC
297 #device rtw # RealTek 802.11 wireless NIC
298 # WaveLAN/IEEE 802.11 wireless NICs. Note: the WaveLAN/IEEE really
299 # exists only as a PCMCIA device, so there is no ISA attachment needed
300 # and resources will always be dynamically assigned by the pccard code.
303 # The probe order of these is presently determined by i386/isa/isa_compat.c.
304 device ie0 at isa? disable port 0x300 irq 10 iomem 0xd0000
305 #device le0 at isa? disable port 0x300 irq 5 iomem 0xd0000
306 device lnc0 at isa? disable port 0x280 irq 10 drq 0
307 device cs0 at isa? disable port 0x300
308 device sn0 at isa? disable port 0x300 irq 10
310 # Pseudo devices - the number indicates how many units to allocate.
311 pseudo-device loop # Network loopback
312 pseudo-device ether # Ethernet support
313 pseudo-device sl 1 # Kernel SLIP
314 pseudo-device ppp 1 # Kernel PPP
315 pseudo-device tun # Packet tunnel.
316 pseudo-device pty # Pseudo-ttys (telnet etc)
317 pseudo-device md # Memory "disks"
318 pseudo-device gif # IPv6 and IPv4 tunneling
319 pseudo-device faith 1 # IPv6-to-IPv4 relaying (translation)
321 # The `bpf' pseudo-device enables the Berkeley Packet Filter.
322 # Be aware of the administrative consequences of enabling this!
323 pseudo-device bpf #Berkeley packet filter
325 pseudo-device crypto # core crypto support, used by wlan
326 pseudo-device cryptodev
329 device uhci # UHCI PCI->USB interface
330 device ohci # OHCI PCI->USB interface
331 device usb # USB Bus (required)
332 device ugen # Generic
333 device uhid # "Human Interface Devices"
334 device ukbd # Keyboard
335 device ulpt # Printer
336 device umass # Disks/Mass storage - Requires scbus and da
338 device uscanner # Scanners
339 device urio # Diamond Rio MP3 Player
340 # USB Ethernet, requires mii
341 device aue # ADMtek USB ethernet
342 device axe # ASIX Electronics USB Ethernet
343 device cue # CATC USB ethernet
344 device kue # Kawasaki LSI USB ethernet
345 device rue # RealTek 8150 based USB ethernet
346 # USB wireless NICs, requires wlan, wlan_amrr
347 #device rum # Ralink Technology RT2501USB/RT2601USB
348 #device ural # Ralink Technology RT2500USB
351 device firewire # FireWire bus code
352 device sbp # SCSI over FireWire (Requires scbus and da)
353 device fwe # Ethernet over FireWire (non-standard!)