628dcc1cf71fff1517ebc0a4be8494b3991d96bf
[dragonfly.git] / sys / dev / netif / em / if_em.h
1 /**************************************************************************
2
3 Copyright (c) 2001-2003, Intel Corporation
4 All rights reserved.
5
6 Redistribution and use in source and binary forms, with or without
7 modification, are permitted provided that the following conditions are met:
8
9  1. Redistributions of source code must retain the above copyright notice,
10     this list of conditions and the following disclaimer.
11
12  2. Redistributions in binary form must reproduce the above copyright
13     notice, this list of conditions and the following disclaimer in the
14     documentation and/or other materials provided with the distribution.
15
16  3. Neither the name of the Intel Corporation nor the names of its
17     contributors may be used to endorse or promote products derived from
18     this software without specific prior written permission.
19
20 THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
21 AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
22 IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
23 ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
24 LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
25 CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
26 SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
27 INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
28 CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
29 ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
30 POSSIBILITY OF SUCH DAMAGE.
31
32 ***************************************************************************/
33
34 /*$FreeBSD: src/sys/dev/em/if_em.h,v 1.1.2.13 2003/06/09 21:43:41 pdeuskar Exp $*/
35 /*$DragonFly: src/sys/dev/netif/em/if_em.h,v 1.3 2003/08/07 21:17:01 dillon Exp $*/
36
37 #ifndef _EM_H_DEFINED_
38 #define _EM_H_DEFINED_
39
40
41 #include <sys/param.h>
42 #include <sys/systm.h>
43 #include <sys/mbuf.h>
44 #include <sys/protosw.h>
45 #include <sys/socket.h>
46 #include <sys/malloc.h>
47 #include <sys/kernel.h>
48 #include <sys/sockio.h>
49
50 #include <net/if.h>
51 #include <net/if_arp.h>
52 #include <net/ethernet.h>
53 #include <net/if_dl.h>
54 #include <net/if_media.h>
55
56 #include <net/bpf.h>
57 #include <net/if_types.h>
58 #include <net/vlan/if_vlan_var.h>
59
60 #include <netinet/in_systm.h>
61 #include <netinet/in.h>
62 #include <netinet/ip.h>
63 #include <netinet/tcp.h>
64 #include <netinet/udp.h>
65
66 #include <sys/bus.h>
67 #include <machine/bus.h>
68 #include <sys/rman.h>
69 #include <machine/resource.h>
70 #include <vm/vm.h>
71 #include <vm/pmap.h>
72 #include <machine/clock.h>
73 #include <bus/pci/pcivar.h>
74 #include <bus/pci/pcireg.h>
75 #include <sys/proc.h>
76 #include <sys/sysctl.h>
77 #include "opt_bdg.h"
78
79 #include "if_em_hw.h"
80
81 /* Tunables */
82
83 /*
84  * TxDescriptors
85  * Valid Range: 80-256 for 82542 and 82543-based adapters
86  *              80-4096 for others
87  * Default Value: 256
88  *   This value is the number of transmit descriptors allocated by the driver.
89  *   Increasing this value allows the driver to queue more transmits. Each
90  *   descriptor is 16 bytes.
91  */
92 #define EM_MAX_TXD                      256
93
94 /*
95  * RxDescriptors
96  * Valid Range: 80-256 for 82542 and 82543-based adapters
97  *              80-4096 for others
98  * Default Value: 256
99  *   This value is the number of receive descriptors allocated by the driver.
100  *   Increasing this value allows the driver to buffer more incoming packets.
101  *   Each descriptor is 16 bytes.  A receive buffer is also allocated for each
102  *   descriptor. The maximum MTU size is 16110.
103  *
104  */
105 #define EM_MAX_RXD                      256
106
107 /*
108  * TxIntDelay
109  * Valid Range: 0-65535 (0=off)
110  * Default Value: 64
111  *   This value delays the generation of transmit interrupts in units of
112  *   1.024 microseconds. Transmit interrupt reduction can improve CPU
113  *   efficiency if properly tuned for specific network traffic. If the
114  *   system is reporting dropped transmits, this value may be set too high
115  *   causing the driver to run out of available transmit descriptors.
116  */
117 #define EM_TIDV                         64
118
119 /*
120  * TxAbsIntDelay (Not valid for 82542 and 82543)
121  * Valid Range: 0-65535 (0=off)
122  * Default Value: 64
123  *   This value, in units of 1.024 microseconds, limits the delay in which a
124  *   transmit interrupt is generated. Useful only if TxIntDelay is non-zero,
125  *   this value ensures that an interrupt is generated after the initial
126  *   packet is sent on the wire within the set amount of time.  Proper tuning,
127  *   along with TxIntDelay, may improve traffic throughput in specific
128  *   network conditions.
129  */
130 #define EM_TADV                         64
131
132 /*
133  * RxIntDelay
134  * Valid Range: 0-65535 (0=off)
135  * Default Value: 0
136  *   This value delays the generation of receive interrupts in units of 1.024
137  *   microseconds.  Receive interrupt reduction can improve CPU efficiency if
138  *   properly tuned for specific network traffic. Increasing this value adds
139  *   extra latency to frame reception and can end up decreasing the throughput
140  *   of TCP traffic. If the system is reporting dropped receives, this value
141  *   may be set too high, causing the driver to run out of available receive
142  *   descriptors.
143  *
144  *   CAUTION: When setting RxIntDelay to a value other than 0, adapters
145  *            may hang (stop transmitting) under certain network conditions.
146  *            If this occurs a WATCHDOG message is logged in the system event log.
147  *            In addition, the controller is automatically reset, restoring the
148  *            network connection. To eliminate the potential for the hang
149  *            ensure that RxIntDelay is set to 0.
150  */
151 #define EM_RDTR                         0
152
153 /*
154  * RxAbsIntDelay (Not valid for 82542 and 82543)
155  * Valid Range: 0-65535 (0=off)
156  * Default Value: 64
157  *   This value, in units of 1.024 microseconds, limits the delay in which a
158  *   receive interrupt is generated. Useful only if RxIntDelay is non-zero,
159  *   this value ensures that an interrupt is generated after the initial
160  *   packet is received within the set amount of time.  Proper tuning,
161  *   along with RxIntDelay, may improve traffic throughput in specific network
162  *   conditions.
163  */
164 #define EM_RADV                         64
165
166
167 /*
168  * This parameter controls the maximum no of times the driver will loop
169  * in the isr.
170  *           Minimum Value = 1
171  */
172 #define EM_MAX_INTR                     3
173
174 /*
175  * Inform the stack about transmit checksum offload capabilities.
176  */
177 #define EM_CHECKSUM_FEATURES            (CSUM_TCP | CSUM_UDP)
178
179 /*
180  * This parameter controls the duration of transmit watchdog timer.
181  */
182 #define EM_TX_TIMEOUT                   5    /* set to 5 seconds */
183
184 /*
185  * This parameter controls when the driver calls the routine to reclaim
186  * transmit descriptors.
187  */
188 #define EM_TX_CLEANUP_THRESHOLD         EM_MAX_TXD / 8
189
190 /*
191  * This parameter controls whether or not autonegotation is enabled.
192  *              0 - Disable autonegotiation
193  *              1 - Enable  autonegotiation
194  */
195 #define DO_AUTO_NEG                     1
196
197 /*
198  * This parameter control whether or not the driver will wait for
199  * autonegotiation to complete.
200  *              1 - Wait for autonegotiation to complete
201  *              0 - Don't wait for autonegotiation to complete
202  */
203 #define WAIT_FOR_AUTO_NEG_DEFAULT       1
204
205
206 /* Tunables -- End */
207
208 #define AUTONEG_ADV_DEFAULT             (ADVERTISE_10_HALF | ADVERTISE_10_FULL | \
209                                          ADVERTISE_100_HALF | ADVERTISE_100_FULL | \
210                                          ADVERTISE_1000_FULL)
211
212 #define EM_VENDOR_ID                    0x8086
213 #define EM_MMBA                         0x0010 /* Mem base address */
214 #define EM_ROUNDUP(size, unit) (((size) + (unit) - 1) & ~((unit) - 1))
215
216 #define EM_JUMBO_PBA                    0x00000028
217 #define EM_DEFAULT_PBA                  0x00000030
218 #define EM_SMARTSPEED_DOWNSHIFT         3
219 #define EM_SMARTSPEED_MAX               15
220
221
222 #define MAX_NUM_MULTICAST_ADDRESSES     128
223 #define PCI_ANY_ID                      (~0U)
224 #define ETHER_ALIGN                     2
225
226 /* Defines for printing debug information */
227 #define DEBUG_INIT  0
228 #define DEBUG_IOCTL 0
229 #define DEBUG_HW    0
230
231 #define INIT_DEBUGOUT(S)            if (DEBUG_INIT)  printf(S "\n")
232 #define INIT_DEBUGOUT1(S, A)        if (DEBUG_INIT)  printf(S "\n", A)
233 #define INIT_DEBUGOUT2(S, A, B)     if (DEBUG_INIT)  printf(S "\n", A, B)
234 #define IOCTL_DEBUGOUT(S)           if (DEBUG_IOCTL) printf(S "\n")
235 #define IOCTL_DEBUGOUT1(S, A)       if (DEBUG_IOCTL) printf(S "\n", A)
236 #define IOCTL_DEBUGOUT2(S, A, B)    if (DEBUG_IOCTL) printf(S "\n", A, B)
237 #define HW_DEBUGOUT(S)              if (DEBUG_HW) printf(S "\n")
238 #define HW_DEBUGOUT1(S, A)          if (DEBUG_HW) printf(S "\n", A)
239 #define HW_DEBUGOUT2(S, A, B)       if (DEBUG_HW) printf(S "\n", A, B)
240
241
242 /* Supported RX Buffer Sizes */
243 #define EM_RXBUFFER_2048        2048
244 #define EM_RXBUFFER_4096        4096
245 #define EM_RXBUFFER_8192        8192
246 #define EM_RXBUFFER_16384      16384
247
248 #ifdef __alpha__
249         #undef vtophys
250         #define vtophys(va)     alpha_XXX_dmamap((vm_offset_t)(va))
251 #endif /* __alpha__ */
252
253 /* ******************************************************************************
254  * vendor_info_array
255  *
256  * This array contains the list of Subvendor/Subdevice IDs on which the driver
257  * should load.
258  *
259  * ******************************************************************************/
260 typedef struct _em_vendor_info_t {
261         unsigned int vendor_id;
262         unsigned int device_id;
263         unsigned int subvendor_id;
264         unsigned int subdevice_id;
265         unsigned int index;
266 } em_vendor_info_t;
267
268
269 struct em_buffer {
270         struct mbuf    *m_head;
271 };
272
273
274 typedef enum _XSUM_CONTEXT_T {
275         OFFLOAD_NONE,
276         OFFLOAD_TCP_IP,
277         OFFLOAD_UDP_IP
278 } XSUM_CONTEXT_T;
279
280 /* Our adapter structure */
281 struct adapter {
282         struct arpcom   interface_data;
283         struct adapter *next;
284         struct adapter *prev;
285         struct em_hw    hw;
286
287         /* FreeBSD operating-system-specific structures */
288         struct em_osdep osdep;
289         struct device   *dev;
290         struct resource *res_memory;
291         struct resource *res_ioport;
292         struct resource *res_interrupt;
293         void            *int_handler_tag;
294         struct ifmedia  media;
295         struct callout_handle timer_handle;
296         struct callout_handle tx_fifo_timer_handle;
297         int             io_rid;
298         u_int8_t        unit;
299
300         /* Info about the board itself */
301         u_int32_t       part_num;
302         u_int8_t        link_active;
303         u_int16_t       link_speed;
304         u_int16_t       link_duplex;
305         u_int32_t       smartspeed;
306         u_int32_t       tx_int_delay;
307         u_int32_t       tx_abs_int_delay;
308         u_int32_t       rx_int_delay;
309         u_int32_t       rx_abs_int_delay;
310
311         XSUM_CONTEXT_T  active_checksum_context;
312
313         /*
314          * Transmit definitions
315          *
316          * We have an array of num_tx_desc descriptors (handled
317          * by the controller) paired with an array of tx_buffers
318          * (at tx_buffer_area).
319          * The index of the next available descriptor is next_avail_tx_desc.
320          * The number of remaining tx_desc is num_tx_desc_avail.
321          */
322         struct em_tx_desc *tx_desc_base;
323         u_int32_t          next_avail_tx_desc;
324         u_int32_t          oldest_used_tx_desc;
325         volatile u_int16_t num_tx_desc_avail;
326         u_int16_t          num_tx_desc;
327         u_int32_t          txd_cmd;
328         struct em_buffer   *tx_buffer_area;
329
330         /* 
331          * Receive definitions
332          *
333          * we have an array of num_rx_desc rx_desc (handled by the
334          * controller), and paired with an array of rx_buffers
335          * (at rx_buffer_area).
336          * The next pair to check on receive is at offset next_rx_desc_to_check
337          */
338         struct em_rx_desc *rx_desc_base;
339         u_int32_t          next_rx_desc_to_check;
340         u_int16_t          num_rx_desc;
341         u_int32_t          rx_buffer_len;
342         struct em_buffer   *rx_buffer_area;
343
344         /* Jumbo frame */
345         struct mbuf        *fmp;
346         struct mbuf        *lmp;
347
348         u_int16_t          tx_fifo_head;
349
350         struct sysctl_ctx_list sysctl_ctx;
351         struct sysctl_oid *sysctl_tree;
352
353         /* Misc stats maintained by the driver */
354         unsigned long   dropped_pkts;
355         unsigned long   mbuf_alloc_failed;
356         unsigned long   mbuf_cluster_failed;
357         unsigned long   no_tx_desc_avail1;
358         unsigned long   no_tx_desc_avail2;
359         u_int64_t       tx_fifo_reset;
360         u_int64_t       tx_fifo_wrk;
361
362 #ifdef DBG_STATS
363         unsigned long   no_pkts_avail;
364         unsigned long   clean_tx_interrupts;
365
366 #endif
367         struct em_hw_stats stats;
368 };
369
370 #endif                                                  /* _EM_H_DEFINED_ */