bnx: Implement multiple RX/TX rings and MSI-X support for 5718/57785
[dragonfly.git] / sys / conf / options
1 # $FreeBSD: src/sys/conf/options,v 1.191.2.53 2003/06/04 17:56:58 sam Exp $
2 #
3 #        On the handling of kernel options
4 #
5 # All kernel options should be listed in LINT, with suitable
6 # descriptions.  Negative options (options that make some code not
7 # compile) should be commented out; LINT should compile as much code
8 # as possible.  Try to structure option-using code so that a single
9 # option only switch code on, or only switch code off, to make it
10 # possible to have a full compile-test.  If necessary, you can include
11 # "opt_lint.h" and check for COMPILING_LINT to get maximum code
12 # coverage.
13 #
14 # All new options shall also be listed in either "conf/options" or
15 # "platform/<platform>/conf/options".  Options that affect a single
16 # source-file <xxx>.[c|s] should be directed into "opt_<xxx>.h", while
17 # options that affect multiple files should either go in
18 # "opt_global.h" if this is a kernel-wide option (used just about
19 # everywhere), or in "opt_<option-name-in-lower-case>.h" if it affect
20 # only some files.  Note that the effect of listing only an option
21 # without a header-file-name in conf/options (and cousins) is that the
22 # last convention is followed.
23 #
24 # This handling scheme is not yet fully implemented.
25 #
26 #
27 # Format of this file:
28 # Option name   filename
29 #
30 # If filename is missing, the default is
31 # opt_<name-of-option-in-lower-case>.h
32
33 # Adaptec Array Controller driver options
34 AAC_DEBUG               opt_aac.h
35
36 # Adaptec aic7xxx SCSI controller options
37 AHC_ALLOW_MEMIO         opt_aic7xxx.h   # Allow PCI devices to use memory
38                                         # mapped I/O
39
40 AHC_TMODE_ENABLE        opt_aic7xxx.h   # Bitmap of units to enable
41                                         # targetmode operations.
42
43 AHC_DUMP_EEPROM         opt_aic7xxx.h   # Dump the contents of our
44                                         # configuration prom.
45
46 AHC_DEBUG               opt_aic7xxx.h   # Compile in Aic7xxx Debugging code.
47
48 AHC_DEBUG_OPTS          opt_aic7xxx.h   # Aic7xxx driver debugging options.
49                                         # See sys/dev/aic7xxx/aic7xxx.h
50
51 AHC_REG_PRETTY_PRINT    opt_aic7xxx.h   # Print register bitfields in debug
52                                         # output.  Adds ~15k to driver.
53
54 # Adaptec aic79xx SCSI controller options
55 AHD_DEBUG               opt_aic79xx.h   # Compile in Aic79xx Debugging code.
56
57 AHD_DEBUG_OPTS          opt_aic79xx.h   # Aic79xx driver debugging options.
58                                         # See sys/dev/aic7xxx/aic79xx.h
59
60 AHD_TMODE_ENABLE        opt_aic79xx.h   # Bitmap of units to enable
61                                         # targetmode operations.
62
63 AHD_REG_PRETTY_PRINT    opt_aic79xx.h   # Print register bitfields in debug
64                                         # output.  Adds ~15k to driver.
65
66 ADW_ALLOW_MEMIO         opt_adw.h       # Allow PCI devices to use memory
67                                         # mapped I/O
68 AMR_DEBUG               opt_amr.h
69 TWA_DEBUG               opt_twa.h
70
71 #options for ACPI support
72 ACPI_DEBUG              opt_acpi.h
73 ACPI_NO_SEMAPHORES      opt_acpi.h
74 ACPI_ENABLE_PCI         opt_acpi.h
75
76 # Miscellaneous options.
77 COMPAT_43       opt_compat.h
78 COMPILING_LINT  opt_lint.h
79 DDB
80 DDB_TRACE
81 DDB_UNATTENDED  opt_ddb.h
82 GDB_REMOTE_CHAT opt_ddb.h
83 KTRACE
84 LIBICONV
85 MD_NSECT        opt_md.h
86 MD_ROOT         opt_md.h
87 MD_ROOT_SIZE    opt_md.h
88 MFI_DEBUG       opt_mfi.h
89 NSWAPDEV        opt_swap.h
90 NSWBUF_MIN      opt_swap.h
91 PPS_SYNC        opt_ntp.h
92 QUOTA
93 SUIDDIR         opt_suiddir.h
94 SYSVMSG         opt_sysvipc.h
95 SYSVSEM         opt_sysvipc.h
96 SYSVSHM         opt_sysvipc.h
97 SHMMIN          opt_sysvipc.h
98 SHMMNI          opt_sysvipc.h
99 SHMSEG          opt_sysvipc.h
100 SEMMAP          opt_sysvipc.h
101 SEMMNI          opt_sysvipc.h
102 SEMMNS          opt_sysvipc.h
103 SEMMNU          opt_sysvipc.h
104 SEMMSL          opt_sysvipc.h
105 SEMOPM          opt_sysvipc.h
106 SEMUME          opt_sysvipc.h
107 MSGMNB          opt_sysvipc.h
108 MSGMNI          opt_sysvipc.h
109 MSGSEG          opt_sysvipc.h
110 MSGSSZ          opt_sysvipc.h
111 MSGTQL          opt_sysvipc.h
112 UCONSOLE
113 ICMP_BANDLIM
114 SHOW_BUSYBUFS
115 DIRECTIO        opt_directio.h
116
117 # POSIX kernel options
118 P1003_1B                        opt_posix.h
119 _KPOSIX_PRIORITY_SCHEDULING     opt_posix.h
120 _KPOSIX_VERSION                 opt_posix.h
121
122 # Do we want the config file compiled into the kernel?
123 INCLUDE_CONFIG_FILE     opt_config.h
124
125 # Options for static file systems.  These should only be used at config
126 # time, since the corresponding lkms cannot work if there are any static
127 # dependencies.  Unusability is enforced by hiding the defines for the
128 # options in a never-included header.
129 EXT2FS          opt_dontuse.h
130 FDESC           opt_dontuse.h
131 HAMMER          opt_dontuse.h
132 HPFS            opt_dontuse.h
133 MFS             opt_dontuse.h
134 MSDOSFS         opt_dontuse.h
135 NTFS            opt_dontuse.h
136 NULLFS          opt_dontuse.h
137 NWFS            opt_dontuse.h
138 PORTAL          opt_dontuse.h
139 PROCFS          opt_dontuse.h
140 PUFFS           opt_dontuse.h
141 SMBFS           opt_dontuse.h
142 TMPFS           opt_dontuse.h
143 UDF             opt_dontuse.h
144
145 # These static filesystems has one slightly bogus static dependency in
146 # sys/platform/.../i386/autoconf.c.  If any of these filesystems are
147 # statically compiled into the kernel, code for mounting them as root
148 # filesystems will be enabled - but look below.  Boot-code is purposely
149 # unavailable for the LKM-based versions.
150 CD9660
151 FFS
152 NFS
153
154 # filesystems and libiconv bridge
155 CD9660_ICONV    opt_dontuse.h
156 MSDOSFS_ICONV   opt_dontuse.h
157 NTFS_ICONV      opt_dontuse.h
158
159 # SMB/CIFS requester
160 NETSMB          opt_netsmb.h
161 NETSMBCRYPTO    opt_netsmb.h
162
163 # If you are following the conditions in the copyright,
164 # you can enable soft-updates which will speed up a lot of things
165 # and make the system safer from crashes at the same time.
166 # otherwise a STUB module will be compiled in.
167 SOFTUPDATES     opt_ffs.h
168
169 # Enable fast hash lookups for large directories on UFS-based filesystems.
170 UFS_DIRHASH     opt_ufs.h
171
172 # The above static dependencies are planned removed, with a
173 # <filesystem>_ROOT option to control if it usable as root.  This list
174 # allows these options to be present in config files already (though
175 # they won't make any difference yet).
176 FFS_ROOT        opt_ffs.h
177 NFS_ROOT        opt_nfsroot.h
178
179 # The union static file system has bogus static dependencies, so it isn't
180 # hidden yet.
181 UNION
182
183 # Options used only in subr_param.c.
184 HZ              opt_param.h
185 MAXFILES        opt_param.h
186 NBUF            opt_param.h
187 NMBCLUSTERS     opt_param.h
188 NMBUFS          opt_param.h
189 VM_BCACHE_SIZE_MAX      opt_param.h
190 VM_SWZONE_SIZE_MAX      opt_param.h
191 MAXUSERS
192 DFLDSIZ         opt_param.h
193 MAXDSIZ         opt_param.h
194 MAXSSIZ         opt_param.h
195
196 # Generic SCSI options.
197 CAM_MAX_HIGHPOWER       opt_cam.h
198 CAMDEBUG                opt_cam.h
199 CAM_DEBUG_DELAY         opt_cam.h
200 CAM_DEBUG_BUS           opt_cam.h
201 CAM_DEBUG_TARGET        opt_cam.h
202 CAM_DEBUG_LUN           opt_cam.h
203 CAM_DEBUG_FLAGS         opt_cam.h
204 SCSI_DELAY              opt_scsi.h
205 SCSI_NO_SENSE_STRINGS   opt_scsi.h
206 SCSI_NO_OP_STRINGS      opt_scsi.h
207
208 # iSCSI options
209 ISCSI_INITIATOR_DEBUG   opt_iscsi_initiator.h
210
211 # Options used only in cam/scsi/scsi_cd.c
212 CHANGER_MIN_BUSY_SECONDS        opt_cd.h
213 CHANGER_MAX_BUSY_SECONDS        opt_cd.h
214
215 # Options used only in cam/scsi/scsi_sa.c.
216 SA_IO_TIMEOUT           opt_sa.h
217 SA_SPACE_TIMEOUT        opt_sa.h
218 SA_REWIND_TIMEOUT       opt_sa.h
219 SA_ERASE_TIMEOUT        opt_sa.h
220 SA_1FM_AT_EOD           opt_sa.h
221
222 # Options used only in cam/scsi/scsi_pt.c
223 SCSI_PT_DEFAULT_TIMEOUT opt_pt.h
224
225 # Options used only in cam/scsi/scsi_ses.c
226 SES_ENABLE_PASSTHROUGH  opt_ses.h
227
228 # Options used in dev/sym/ (Symbios SCSI driver).
229 SYM_SETUP_LP_PROBE_MAP  opt_sym.h       #-Low Priority Probe Map (bits)
230                                         # Allows the ncr to take precedence
231                                         # 1 (1<<0) -> 810a, 860
232                                         # 2 (1<<1) -> 825a, 875, 885, 895
233                                         # 4 (1<<2) -> 895a, 896, 1510d 
234 SYM_SETUP_SCSI_DIFF     opt_sym.h       #-HVD support for 825a, 875, 885
235                                         # disabled:0 (default), enabled:1
236 SYM_SETUP_PCI_PARITY    opt_sym.h       #-PCI parity checking
237                                         # disabled:0, enabled:1 (default)
238 SYM_SETUP_MAX_LUN       opt_sym.h       #-Number of LUNs supported
239                                         # default:8, range:[1..64]
240
241 # Options used only in pci/ncr.c
242 SCSI_NCR_DEBUG          opt_ncr.h
243 SCSI_NCR_MAX_SYNC       opt_ncr.h
244 SCSI_NCR_MAX_WIDE       opt_ncr.h
245 SCSI_NCR_MYADDR         opt_ncr.h
246
247 # Options used only in pci/isp_pci.c
248 ISP_TARGET_MODE         opt_isp.h
249
250 # Options used in the 'nata' ATA/ATAPI driver
251 ATA_STATIC_ID           opt_ata.h
252
253 # Net stuff.
254 # altq stuff
255 ALTQ                    opt_global.h
256 ALTQ_CBQ                opt_altq.h
257 ALTQ_RED                opt_altq.h
258 ALTQ_RIO                opt_altq.h
259 ALTQ_HFSC               opt_altq.h
260 ALTQ_PRIQ               opt_altq.h
261 ALTQ_FAIRQ              opt_altq.h
262 ALTQ_NOPCC              opt_altq.h
263 ALTQ_DEBUG              opt_altq.h
264
265 ACCEPT_FILTER_DATA
266 ACCEPT_FILTER_HTTP
267 BOOTP                   opt_bootp.h
268 BOOTP_COMPAT            opt_bootp.h
269 BOOTP_NFSROOT           opt_bootp.h
270 BOOTP_NFSV3             opt_bootp.h
271 BOOTP_WIRED_TO          opt_bootp.h
272 CARP                    opt_carp.h
273 ETHER_II                opt_ef.h
274 ETHER_8023              opt_ef.h
275 ETHER_8022              opt_ef.h
276 ETHER_SNAP              opt_ef.h
277 MROUTING                opt_mrouting.h
278 PIM                     opt_mrouting.h
279 INET                    opt_inet.h
280 INET6                   opt_inet6.h
281 IPSEC                   opt_ipsec.h
282 IPSEC_ESP               opt_ipsec.h
283 IPSEC_DEBUG             opt_ipsec.h
284 IPSEC_FILTERGIF         opt_ipsec.h
285 FAST_IPSEC              opt_ipsec.h
286 IPDIVERT
287 DUMMYNET                opt_ipdn.h
288 DUMMYNET_DEBUG          opt_ipdn.h
289 IPFIREWALL              opt_ipfw.h
290 IPFIREWALL_DEBUG        opt_ipfw.h
291 IPFIREWALL_VERBOSE      opt_ipfw.h
292 IPFIREWALL_VERBOSE_LIMIT        opt_ipfw.h
293 IPFIREWALL_DEFAULT_TO_ACCEPT    opt_ipfw.h
294 IPV6FIREWALL            opt_ip6fw.h
295 IPV6FIREWALL_VERBOSE    opt_ip6fw.h
296 IPV6FIREWALL_VERBOSE_LIMIT      opt_ip6fw.h
297 IPV6FIREWALL_DEFAULT_TO_ACCEPT  opt_ip6fw.h
298 IPSTEALTH
299 IPX                     opt_ipx.h
300 IPXIP                   opt_ipx.h
301 IPTUNNEL                opt_ipx.h
302 LIBMCHAIN
303 MPLS                    opt_mpls.h
304 NCP                     opt_ncp.h
305 PPP_BSDCOMP             opt_ppp.h
306 PPP_DEFLATE             opt_ppp.h
307 PPP_FILTER              opt_ppp.h
308 SLIP_IFF_OPTS           opt_slip.h
309 TCPDEBUG
310 TCP_SIGNATURE           opt_inet.h
311 TCP_DROP_SYNFIN         opt_tcp_input.h
312
313 XBONEHACK
314 MBUF_STRESS_TEST        opt_mbuf_stress_test.h
315
316 # (New netgraph, port still in progress)
317 #
318 # Netgraph(4). Use option NETGRAPH7 to enable the base netgraph code.
319 # Each netgraph node type can be either be compiled into the kernel
320 # or loaded dynamically. To get the former, include the corresponding
321 # option below. Each type has its own man page, e.g. ng_async(4).
322 NETGRAPH7
323 NETGRAPH7_DEBUG         opt_netgraph.h
324 NETGRAPH7_ASYNC         opt_netgraph.h
325 NETGRAPH7_ATMLLC        opt_netgraph.h
326 NETGRAPH7_ATM_ATMPIF    opt_netgraph.h
327 NETGRAPH7_BLUETOOTH             opt_netgraph.h
328 NETGRAPH7_BLUETOOTH_BT3C        opt_netgraph.h
329 NETGRAPH7_BLUETOOTH_H4          opt_netgraph.h
330 NETGRAPH7_BLUETOOTH_HCI         opt_netgraph.h
331 NETGRAPH7_BLUETOOTH_L2CAP       opt_netgraph.h
332 NETGRAPH7_BLUETOOTH_SOCKET      opt_netgraph.h
333 NETGRAPH7_BLUETOOTH_UBT         opt_netgraph.h
334 NETGRAPH7_BLUETOOTH_UBTBCMFW    opt_netgraph.h
335 NETGRAPH7_BPF           opt_netgraph.h
336 NETGRAPH7_BRIDGE        opt_netgraph.h
337 NETGRAPH7_CAR           opt_netgraph.h
338 NETGRAPH7_CISCO         opt_netgraph.h
339 NETGRAPH7_DEFLATE       opt_netgraph.h
340 NETGRAPH7_DEVICE        opt_netgraph.h
341 NETGRAPH7_ECHO          opt_netgraph.h
342 NETGRAPH7_EIFACE        opt_netgraph.h
343 NETGRAPH7_ETF           opt_netgraph.h
344 NETGRAPH7_ETHER         opt_netgraph.h
345 NETGRAPH7_FEC           opt_netgraph.h
346 NETGRAPH7_FRAME_RELAY   opt_netgraph.h
347 NETGRAPH7_GIF           opt_netgraph.h
348 NETGRAPH7_GIF_DEMUX     opt_netgraph.h
349 NETGRAPH7_HOLE          opt_netgraph.h
350 NETGRAPH7_HUB           opt_netgraph.h
351 NETGRAPH7_IFACE         opt_netgraph.h
352 NETGRAPH7_IP_INPUT      opt_netgraph.h
353 NETGRAPH7_IPFW          opt_netgraph.h
354 NETGRAPH7_KSOCKET       opt_netgraph.h
355 NETGRAPH7_L2TP          opt_netgraph.h
356 NETGRAPH7_LMI           opt_netgraph.h
357 # MPPC compression requires proprietary files (not included)
358 NETGRAPH7_MPPC_COMPRESSION      opt_netgraph.h
359 NETGRAPH7_MPPC_ENCRYPTION       opt_netgraph.h
360 NETGRAPH7_NAT           opt_netgraph.h
361 NETGRAPH7_NETFLOW       opt_netgraph.h
362 NETGRAPH7_ONE2MANY      opt_netgraph.h
363 NETGRAPH7_PPP           opt_netgraph.h
364 NETGRAPH7_PPPOE         opt_netgraph.h
365 NETGRAPH7_PPTPGRE       opt_netgraph.h
366 NETGRAPH7_PRED1         opt_netgraph.h
367 NETGRAPH7_RFC1490       opt_netgraph.h
368 NETGRAPH7_SOCKET        opt_netgraph.h
369 NETGRAPH7_SPLIT         opt_netgraph.h
370 NETGRAPH7_SPPP          opt_netgraph.h
371 NETGRAPH7_TAG           opt_netgraph.h
372 NETGRAPH7_TCPMSS        opt_netgraph.h
373 NETGRAPH7_TEE           opt_netgraph.h
374 NETGRAPH7_TTY           opt_netgraph.h
375 NETGRAPH7_UI            opt_netgraph.h
376 NETGRAPH7_VJC           opt_netgraph.h
377
378 # NgATM options
379 NGATM7_ATM              opt_netgraph.h
380 NGATM7_ATMBASE          opt_netgraph.h
381 NGATM7_SSCOP            opt_netgraph.h
382 NGATM7_SSCFU            opt_netgraph.h
383 NGATM7_UNI              opt_netgraph.h
384 NGATM7_CCATM            opt_netgraph.h
385
386 # Netgraph(4). Use option NETGRAPH to enable the base netgraph code.
387 # Each netgraph node type can be either be compiled into the kernel
388 # or loaded dynamically. To get the former, include the corresponding
389 # option below. Each type has its own man page, e.g. ng_async(8).
390 NETGRAPH
391 NETGRAPH_ASYNC          opt_netgraph.h
392 NETGRAPH_BPF            opt_netgraph.h
393 NETGRAPH_BRIDGE         opt_netgraph.h
394 NETGRAPH_CISCO          opt_netgraph.h
395 NETGRAPH_ECHO           opt_netgraph.h
396 NETGRAPH_EIFACE         opt_netgraph.h
397 NETGRAPH_ETHER          opt_netgraph.h
398 NETGRAPH_FEC            opt_netgraph.h
399 NETGRAPH_FRAME_RELAY    opt_netgraph.h
400 NETGRAPH_HOLE           opt_netgraph.h
401 NETGRAPH_IFACE          opt_netgraph.h
402 NETGRAPH_KSOCKET        opt_netgraph.h
403 NETGRAPH_LMI            opt_netgraph.h
404 NETGRAPH_L2TP           opt_netgraph.h
405 # MPPC compression requires proprietary files (not included)
406 NETGRAPH_MPPC_COMPRESSION       opt_netgraph.h
407 NETGRAPH_MPPC_ENCRYPTION        opt_netgraph.h
408 NETGRAPH_ONE2MANY       opt_netgraph.h
409 NETGRAPH_PPP            opt_netgraph.h
410 NETGRAPH_PPPOE          opt_netgraph.h
411 NETGRAPH_PPTPGRE        opt_netgraph.h
412 NETGRAPH_RFC1490        opt_netgraph.h
413 NETGRAPH_SOCKET         opt_netgraph.h
414 NETGRAPH_TEE            opt_netgraph.h
415 NETGRAPH_TTY            opt_netgraph.h
416 NETGRAPH_UI             opt_netgraph.h
417 NETGRAPH_VJC            opt_netgraph.h
418
419 # AGP options
420 AGP_DEBUG               opt_agp.h
421
422 # DRM options
423 DRM_DEBUG               opt_drm.h
424 DRM_LINUX               opt_drm.h
425
426 # ATM (HARP version)
427 ATM_CORE                opt_atm.h
428 ATM_IP                  opt_atm.h
429 ATM_SIGPVC              opt_atm.h
430 ATM_SPANS               opt_atm.h
431 ATM_UNI                 opt_atm.h
432
433 # XXX Conflict: # of devices vs network protocol (Native ATM).
434 # This makes "atm.h" unusable.
435 NATM                    opt_natm.h
436
437 # DPT driver debug flags
438 DPT_MEASURE_PERFORMANCE opt_dpt.h
439 DPT_HANDLE_TIMEOUTS     opt_dpt.h
440 DPT_TIMEOUT_FACTOR      opt_dpt.h
441 DPT_LOST_IRQ            opt_dpt.h
442 DPT_RESET_HBA           opt_dpt.h
443
444 # Misc debug flags.  Most of these should probably be replaced with
445 # 'DEBUG', and then let people recompile just the interesting modules
446 # with 'make CC="cc -DDEBUG"'.
447 CLUSTERDEBUG            opt_debug_cluster.h
448 DEBUG_1284              opt_ppb_1284.h
449 VP0_DEBUG               opt_vpo.h
450 LPT_DEBUG               opt_lpt.h
451 PLIP_DEBUG              opt_plip.h
452 LOCKF_DEBUG             opt_debug_lockf.h
453 SI_DEBUG                opt_debug_si.h
454
455 # Fb options
456 FB_DEBUG                opt_fb.h
457 FB_INSTALL_CDEV         opt_fb.h
458
459 # ppbus related options
460 PERIPH_1284             opt_ppb_1284.h
461 DONTPROBE_1284          opt_ppb_1284.h
462
463 # smbus related options
464 ENABLE_ALART            opt_intpm.h
465
466 # These cause changes all over the kernel
467 NO_LWKT_SPLIT_USERPRI   opt_global.h
468 BLKDEV_IOSIZE           opt_global.h
469 DEBUG                   opt_global.h
470 DEBUG_LOCKS             opt_global.h
471 DEBUG_LOCKS_LATENCY     opt_global.h
472 DEBUG_CRIT_SECTIONS     opt_global.h
473 DIAGNOSTIC              opt_global.h
474 INVARIANTS              opt_global.h
475 VFS_BIO_DEBUG           opt_global.h
476 DEBUG_INTERRUPTS        opt_global.h
477 SOCKBUF_DEBUG           opt_global.h
478 PANIC_DEBUG             opt_global.h
479 MBUF_DEBUG              opt_global.h
480 PMAP_DEBUG              opt_global.h
481 VM_PAGE_DEBUG           opt_global.h
482 SLAB_DEBUG              opt_global.h
483
484 # Sample system/interrupt PC
485 DEBUG_PCTRACK           opt_pctrack.h
486
487 # These are VM related options
488 NO_SWAPPING             opt_vm.h
489
490 # sys/netkey
491 KEY
492
493 # Size of the kernel message buffer
494 MSGBUF_SIZE             opt_msgbuf.h
495
496 # PCI related options
497 COMPAT_OLDPCI
498
499 # NFS options
500 NFS_MINATTRTIMO         opt_nfs.h
501 NFS_MAXATTRTIMO         opt_nfs.h
502 NFS_MINDIRATTRTIMO      opt_nfs.h
503 NFS_MAXDIRATTRTIMO      opt_nfs.h
504 NFS_GATHERDELAY         opt_nfs.h
505 NFS_UIDHASHSIZ          opt_nfs.h
506 NFS_WDELAYHASHSIZ       opt_nfs.h
507 NFS_MUIDHASHSIZ         opt_nfs.h
508 NFS_NOSERVER            opt_nfs.h
509 NFS_DEBUG               opt_nfs.h
510
511 # MSDOSFS options
512 MSDOSFS_DEBUG           opt_msdosfs.h
513
514 # For the Bt848/Bt848A/Bt849/Bt878/Bt879 driver
515 BROOKTREE_SYSTEM_DEFAULT        opt_bktr.h
516 BROOKTREE_ALLOC_PAGES           opt_bktr.h
517 BKTR_OVERRIDE_CARD              opt_bktr.h
518 BKTR_OVERRIDE_TUNER             opt_bktr.h
519 BKTR_OVERRIDE_DBX               opt_bktr.h
520 BKTR_OVERRIDE_MSP               opt_bktr.h
521 BKTR_SYSTEM_DEFAULT             opt_bktr.h
522 BKTR_ALLOC_PAGES                opt_bktr.h
523 BKTR_USE_PLL                    opt_bktr.h      
524 BKTR_GPIO_ACCESS                opt_bktr.h
525 BKTR_NO_MSP_RESET               opt_bktr.h
526 BKTR_430_FX_MODE                opt_bktr.h
527 BKTR_SIS_VIA_MODE               opt_bktr.h
528 BKTR_NEW_MSP34XX_DRIVER         opt_bktr.h
529
530 # Various mi ISA bus flags
531 COM_ESP                 opt_sio.h
532 COM_MULTIPORT           opt_sio.h
533 BREAK_TO_DEBUGGER       opt_comconsole.h
534 ALT_BREAK_TO_DEBUGGER   opt_comconsole.h
535
536 # options for bus/device framework
537 BUS_DEBUG               opt_bus.h
538
539 # options for USB support
540 OHCI_DEBUG              opt_usb.h
541 USB_DEBUG               opt_usb.h
542
543 # Vinum options
544 VINUMDEBUG              opt_vinum.h
545
546 # Embedded system options
547 UKBD_DFLT_KEYMAP        opt_ukbd.h
548 INIT_PATH               opt_init_path.h
549
550 ROOTDEVNAME             opt_rootdevname.h
551
552 FDC_DEBUG               opt_fdc.h
553 PCFCLOCK_VERBOSE        opt_pcfclock.h
554 PCFCLOCK_MAX_RETRIES    opt_pcfclock.h
555
556 # Network device queue based polling
557 IFPOLL_ENABLE           opt_ifpoll.h
558
559 # options for ubsec driver
560 UBSEC_DEBUG             opt_ubsec.h
561 UBSEC_RNDTEST           opt_ubsec.h
562 UBSEC_NO_RNG            opt_ubsec.h
563
564 # options for hifn driver
565 HIFN_DEBUG              opt_hifn.h
566 HIFN_RNDTEST            opt_hifn.h
567 HIFN_NO_RNG             opt_hifn.h
568
569 # options for safenet driver
570 SAFE_DEBUG              opt_safe.h
571 SAFE_NO_RNG             opt_safe.h
572 SAFE_RNDTEST            opt_safe.h
573
574 # KTR options
575 KTR                             opt_global.h
576 KTR_ENTRIES                     opt_global.h
577 KTR_ALL                         opt_ktr.h
578 KTR_CTXSW                       opt_ktr.h
579 KTR_DMCRYPT                     opt_ktr.h
580 KTR_DSCHED_BFQ                  opt_ktr.h
581 KTR_ETHERNET                    opt_ktr.h
582 KTR_HAMMER                      opt_ktr.h
583 KTR_IFQ                         opt_ktr.h
584 KTR_IF_BGE                      opt_ktr.h
585 KTR_IF_EM                       opt_ktr.h
586 KTR_IF_EMX                      opt_ktr.h
587 KTR_IF_START                    opt_ktr.h
588 KTR_IPIQ                        opt_ktr.h
589 KTR_KERNENTRY                   opt_ktr.h
590 KTR_MEMORY                      opt_ktr.h
591 KTR_SERIALIZER                  opt_ktr.h
592 KTR_SPIN_CONTENTION             opt_ktr.h
593 KTR_TESTLOG                     opt_ktr.h
594 KTR_TOKENS                      opt_ktr.h
595 KTR_TSLEEP                      opt_ktr.h
596 KTR_USB_MEMORY                  opt_ktr.h
597 KTR_USCHED_BSD4                 opt_ktr.h
598 KTR_USCHED_DFLY                 opt_ktr.h
599 KTR_VERBOSE                     opt_ktr.h
600
601 # NTFS options
602 NTFS_DEBUG                      opt_ntfs.h
603
604 # options for the Atheros driver
605 ATH_DEBUG               opt_ath.h
606 ATH_DIAGAPI             opt_ath.h
607 ATH_RXBUF               opt_ath.h
608 ATH_TXBUF               opt_ath.h
609
610 # ...and its HAL
611 AH_SUPPORT_AR5416       opt_ah.h
612
613 # bce driver
614 BCE_RSS_DEBUG           opt_bce.h
615 BCE_TSS_DEBUG           opt_bce.h
616
617 # bnx driver
618 BNX_RSS_DEBUG           opt_bnx.h
619 BNX_TSO_DEBUG           opt_bnx.h
620 BNX_TSS_DEBUG           opt_bnx.h
621
622 # ed driver
623 ED_NO_MIIBUS            opt_ed.h
624
625 # emx driver
626 EMX_RSS_DEBUG           opt_emx.h
627 EMX_TSO_DEBUG           opt_emx.h
628 EMX_TSS_DEBUG           opt_emx.h
629
630 # jme driver
631 JME_RSS_DEBUG           opt_jme.h
632
633 # igb driver
634 IGB_RSS_DEBUG           opt_igb.h
635 IGB_TSS_DEBUG           opt_igb.h
636 IGB_MSIX_DEBUG          opt_igb.h
637
638 # dcons options
639 DCONS_BUF_SIZE          opt_dcons.h
640 DCONS_POLL_HZ           opt_dcons.h
641 DCONS_FORCE_CONSOLE     opt_dcons.h
642 DCONS_FORCE_GDB         opt_dcons.h
643
644 # deprecated drivers and options
645 I_WANT_DEPRECATED_STUFF opt_deprecated.h
646
647 # SCTP
648 SCTP                    opt_sctp.h
649 SCTP_DEBUG              opt_sctp.h
650 SCTP_USE_ADLER32        opt_sctp.h
651 SCTP_HIGH_SPEED         opt_sctp.h
652 SCTP_STAT_LOGGING       opt_sctp.h
653 SCTP_CWND_LOGGING       opt_sctp.h
654 SCTP_BLK_LOGGING        opt_sctp.h
655 SCTP_STR_LOGGING        opt_sctp.h
656 SCTP_FR_LOGGING         opt_sctp.h
657 SCTP_MAP_LOGGING        opt_sctp.h
658
659 # syslink kernel support
660 #
661 SYSLINK                 opt_syslink.h
662
663 # DSCHED stuff
664 DSCHED_AS               opt_dsched.h
665 DSCHED_BFQ              opt_dsched.h
666 DSCHED_FQ               opt_dsched.h
667
668 # Receive Side Scaling (now basecode)
669 RSS_DEBUG               opt_rss.h
670
671 # Panic settings
672 WDOG_DISABLE_ON_PANIC   opt_panic.h
673 ERROR_LED_ON_PANIC      opt_panic.h
674
675 # 802.11 support layer
676 IEEE80211_DEBUG         opt_wlan.h
677 IEEE80211_DEBUG_REFCNT  opt_wlan.h
678 IEEE80211_AMPDU_AGE     opt_wlan.h
679 IEEE80211_SUPPORT_MESH  opt_wlan.h
680 IEEE80211_SUPPORT_SUPERG        opt_wlan.h
681 IEEE80211_SUPPORT_TDMA  opt_wlan.h
682
683 # 802.11 TDMA support
684 TDMA_SLOTLEN_DEFAULT    opt_tdma.h
685 TDMA_SLOTCNT_DEFAULT    opt_tdma.h
686 TDMA_BINTVAL_DEFAULT    opt_tdma.h
687 TDMA_TXRATE_11B_DEFAULT opt_tdma.h
688 TDMA_TXRATE_11G_DEFAULT opt_tdma.h
689 TDMA_TXRATE_11A_DEFAULT opt_tdma.h
690 TDMA_TXRATE_TURBO_DEFAULT       opt_tdma.h
691 TDMA_TXRATE_HALF_DEFAULT        opt_tdma.h
692 TDMA_TXRATE_QUARTER_DEFAULT     opt_tdma.h
693 TDMA_TXRATE_11NA_DEFAULT        opt_tdma.h
694 TDMA_TXRATE_11NG_DEFAULT        opt_tdma.h
695
696 PANIC_REBOOT_WAIT_TIME  opt_panic.h
697
698 # Obsolete options (will be removed in the future)
699 #
700 DEVICE_POLLING          opt_dontuse.h
701 SMP                     opt_dontuse.h