4 # This is rc.conf - a file full of useful variables that you can set
5 # to change the default startup behavior of your system. You should
6 # not edit this file! Put any overrides into one of the ${rc_conf_files}
7 # instead and you will be able to update these defaults later without
8 # spamming your local configuration information.
10 # The ${rc_conf_files} files should only contain values which override
11 # values set in this file. This eases the upgrade path when defaults
12 # are changed and new features are added.
14 # All arguments must be in double or single quotes.
16 # $FreeBSD: src/etc/defaults/rc.conf,v 1.180 2003/06/26 09:50:50 smkelly Exp $
18 ##############################################################
19 ### Important initial Boot-time options ####################
20 ##############################################################
22 rc_debug="NO" # Set to YES to enable debugging output from rc.d
23 rc_info="YES" # Enables display of informational messages at boot.
24 rc_startmsgs="YES" # Show "Starting foo:" messages at boot
25 rcshutdown_timeout="30" # Seconds to wait before terminating rc.shutdown
26 swapfile="NO" # Set to name of swapfile if aux swapfile desired.
27 powerd_enable="NO" # Run powerd to adjust CPU speed.
28 powerd_flags="" # additional flags for powerd(8).
29 sensorsd_enable="NO" # Run sensorsd to monitor and log sensor state changes.
30 sensorsd_flags="" # additional flags for sensorsd(8).
31 hotplugd_enable="NO" # Run hotplugd to monitor devices hot plugging.
32 hotplugd_flags="" # additional flags for hotplugd(8)
33 pccard_ifconfig="NO" # Specialized pccard ethernet configuration (or NO).
34 pccard_ether_delay="5" # Delay before trying to start dhclient in pccard_ether
35 removable_interfaces="" # Removable network interfaces for /etc/pccard_ether.
36 local_startup="/usr/local/etc/rc.d /usr/pkg/etc/rc.d"
37 # startup script dirs.
38 script_name_sep=" " # Change if your startup scripts' names contain spaces
39 rc_conf_files="/etc/rc.conf /etc/rc.conf.local"
40 fsck_y_enable="NO" # Set to YES to do fsck -y if the initial preen fails.
41 netfs_types="nfs:NFS smbfs:SMB" # Net filesystems.
42 extra_netfs_types="NO" # List of network extra filesystem types for delayed
43 # mount at startup (or NO).
44 devfs_config_files="/etc/defaults/devfs.conf /etc/devfs.conf"
45 # Config files for devfs(5)
47 ##############################################################
48 ### Network configuration sub-section ######################
49 ##############################################################
51 ### Basic network and firewall/security options: ###
53 # see 'man firewall' for an explanation of the default firewall rules
55 hostname="" # Set this!
56 nisdomainname="NO" # Set to NIS domain if using NIS (or NO).
57 dhclient_program="/sbin/dhclient" # Path to dhcp client program.
58 dhclient_flags="-w" # Additional flags to pass to dhcp client.
59 firewall_enable="NO" # Set to YES to enable firewall functionality
60 firewall_script="/etc/rc.firewall" # Which script to run to set up the firewall
61 firewall_type="UNKNOWN" # Firewall type (see /etc/rc.firewall)
62 firewall_trusted_nets="192.168.0.0/16" # list of trusted nets
63 firewall_trusted_interfaces="" # list of trusted interfaces e.g. "rl0 xl0"
64 firewall_allowed_icmp_types="0 3 8 11 12 13 14"
65 firewall_open_tcp_ports="22 25 53 80 113 443"
66 firewall_open_udp_ports="53"
67 firewall_quiet="NO" # Set to YES to suppress rule display
68 firewall_logging="NO" # Set to YES to enable events logging
69 firewall_flags="" # Flags passed to ipfw when type is a file
70 ipfw3_enable="NO" # Set to YES to enable ipfw3(8) firewall
71 ipfw3_program="/sbin/ipfw3" # where the ipfw3 program lives
72 ipfw3_script="/etc/ipfw3.rules" # Script to run to set up the firewall rules
73 ipfw3_modules="ipfw3 ipfw3_basic" # IPFW3 modules to be loaded
74 ip_portrange_first="NO" # Set first dynamically allocated port
75 ip_portrange_last="NO" # Set last dynamically allocated port
76 natd_program="/sbin/natd" # path to natd, if you want a different one.
77 natd_enable="NO" # Enable natd (if firewall_enable == YES).
78 natd_interface="" # Public interface or IPaddress to use.
79 natd_flags="" # Additional flags for natd.
80 pf_enable="NO" # Set to YES to enable packet filter (pf)
81 pf_rules="/etc/pf.conf" # rules definition file for pf
82 pf_program="/usr/sbin/pfctl" # where the pfctl program lives
83 pf_flags="" # additional flags for pfctl
84 pflog_enable="NO" # Set to YES to enable packet filter logging
85 pflog_logfile="/var/log/pflog" # where pflogd should store the logfile
86 pflog_program="/usr/sbin/pflogd" # where the pflogd program lives
87 pflog_flags="" # additional flags for pflogd
88 tcp_extensions="YES" # Set to NO to turn off RFC1323 extensions.
89 log_in_vain="0" # >=1 to log connects to ports w/o listeners.
90 tcp_keepalive="YES" # Enable stale TCP connection timeout (or NO).
91 # For the following option you need to have TCP_DROP_SYNFIN set in your
92 # kernel. Please refer to LINT64 details.
93 tcp_drop_synfin="NO" # Set to YES to drop TCP packets with SYN+FIN
94 # NOTE: this violates the TCP specification
95 icmp_drop_redirect="NO" # Set to YES to ignore ICMP REDIRECT packets
96 icmp_log_redirect="NO" # Set to YES to log ICMP REDIRECT packets
97 network_interfaces="auto" # List of network interfaces (or "auto").
98 cloned_interfaces="" # List of cloned network interfaces to create.
99 #cloned_interfaces="gif0 gif1 gif2 gif3" # Pre-cloning X86_64_GENERIC config.
100 ifconfig_lo0="inet 127.0.0.1" # default loopback device configuration.
101 #ifconfig_lo0_alias0="inet 127.0.0.254 netmask 0xffffffff" # Sample alias entry.
102 #ifconfig_fxp0_name="net0" # Change interface name from fxp0 to net0.
104 # If you have any sppp(4) interfaces above, you might also want to set
105 # the following parameters. Refer to spppcontrol(8) for their meaning.
106 sppp_interfaces="" # List of sppp interfaces.
107 #sppp_interfaces="...0" # example: sppp over ...
108 #spppconfig_...0="authproto=chap myauthname=foo myauthsecret='top secret' hisauthname=some-gw hisauthsecret='another secret'"
109 gif_interfaces="NO" # List of GIF tunnels (or "NO").
110 #gif_interfaces="gif0 gif1" # Examples typically for a router.
111 # Choose correct tunnel addrs.
112 #gifconfig_gif0="10.1.1.1 10.1.2.1" # Examples typically for a router.
113 #gifconfig_gif1="10.1.1.2 10.1.2.2" # Examples typically for a router.
115 # User ppp configuration.
116 ppp_enable="NO" # Start user-ppp (or NO).
117 ppp_mode="auto" # Choice of "auto", "ddial", "direct" or "dedicated".
118 # For details see man page for ppp(8). Default is auto.
119 ppp_nat="YES" # Use PPP's internal network address translation or NO.
120 ppp_profile="papchap" # Which profile to use from /etc/ppp/ppp.conf.
121 ppp_user="root" # Which user to run ppp as
123 ### Network daemon (miscellaneous) ###
124 syslogd_enable="YES" # Run syslog daemon (or NO).
125 syslogd_program="/usr/sbin/syslogd" # path to syslogd, if you want a different one.
126 #syslogd_flags="-s" # Flags to syslogd (if enabled).
127 syslogd_flags="-ss" # Syslogd flags to not bind an inet socket
128 inetd_enable="NO" # Run the network daemon dispatcher (YES/NO).
129 inetd_program="/usr/sbin/inetd" # path to inetd, if you want a different one.
130 inetd_flags="-wW" # Optional flags to inetd
132 rwhod_enable="NO" # Run the rwho daemon (or NO).
133 rwhod_flags="" # Flags for rwhod
134 rarpd_enable="NO" # Run rarpd (or NO).
135 rarpd_flags="" # Flags to rarpd.
136 bootparamd_enable="NO" # Run bootparamd (or NO).
137 bootparamd_flags="" # Flags to bootparamd
138 pppoed_enable="NO" # Run the PPP over Ethernet daemon.
139 pppoed_provider="*" # Provider and ppp(8) config file entry.
140 pppoed_flags="-P /var/run/pppoed.pid" # Flags to pppoed (if enabled).
141 pppoed_interface="fxp0" # The interface that pppoed runs on.
142 sshd_enable="NO" # Enable sshd
143 sshd_program="/usr/sbin/sshd" # path to sshd, if you want a different one.
144 sshd_flags="" # Additional flags for sshd.
146 ftpd_enable="NO" # Run stand-alone ftp daemon (or NO).
147 ftpd_flags="" # Flags for ftpd, -D added implicitly.
149 ### Network File System (NFS): ###
150 ### Server-side options also need rpcbind_enable="YES" ###
152 ### NOTE: attribute cache timeouts only effect NFS lookup rpc's. If
153 ### the mtime matches the data cache is left intact.
155 autofs_enable="NO" # Run automountd(8)
156 automount_flags="" # Flags to automount(8) (if autofs enabled).
157 automountd_flags="" # Flags to automountd(8) (if autofs enabled).
158 autounmountd_flags="" # Flags to autounmountd(8) (if autofs enabled).
159 nfs_client_enable="NO" # This host is an NFS client (or NO).
160 nfs_access_cache="5" # Client attribute cache timeout in seconds
161 #nfs_neg_cache="3" # Client attribute negative hit cache timeout
162 nfs_server_enable="NO" # This host is an NFS server (or NO).
163 nfs_server_flags="-u -t -n 4" # Flags to nfsd (if enabled).
164 mountd_enable="NO" # Run mountd (or NO).
165 mountd_flags="-r" # Flags to mountd (if NFS server enabled).
166 weak_mountd_authentication="NO" # Allow non-root mount requests to be served.
167 nfs_reserved_port_only="NO" # Provide NFS only on secure port (or NO).
168 nfs_bufpackets="" # bufspace (in packets) for client
169 rpc_lockd_enable="NO" # Run NFS rpc.lockd needed for client/server.
170 rpc_lockd_flags="" # Flags to rpc.lockd (if enabled).
171 rpc_statd_enable="NO" # Run NFS rpc.statd needed for client/server.
172 rpc_statd_flags="" # Flags to rpc.statd (if enabled).
173 rpc_umntall_enable="YES" # Run NFS rpc.umntall on boot and shutdown
174 rpcbind_enable="NO" # Run the portmapper service (YES/NO).
175 rpcbind_program="/usr/sbin/rpcbind" # path to rpcbind, if you want a different one.
176 rpcbind_flags="" # Flags to rpcbind (if enabled).
177 rpc_ypupdated_enable="NO" # Run if NIS master and SecureRPC (or NO).
178 keyserv_enable="NO" # Run the SecureRPC keyserver (or NO).
179 keyserv_flags="" # Flags to keyserv (if enabled).
181 ### Network Time Services options: ###
182 timed_enable="NO" # Run the time daemon (or NO).
183 timed_flags="" # Flags to timed (if enabled).
184 dntpd_enable="NO" # Run dntpd Network Time Protocol (or NO).
185 dntpd_program="/usr/sbin/dntpd" # path to dntpd, if you want a different one.
186 dntpd_flags="" # Flags to dntpd (if enabled) also server name(s)
188 # Bluetooth deamons and options:
189 btconfig_enable="NO" # Configure Bluetooth devices (or NO).
190 btconfig_devices="" # List of Bluetooth devices (or empty for all).
191 #btconfig_<device>="" # Parameters to pass to <device>.
192 btconfig_args="" # Parameters to pass to all devices.
193 sdpd_enable="NO" # Run the Service Discovery Profile daemon (or NO).
194 sdpd_flags="" # Flags to sdpd (if enabled).
195 bthcid_enable="NO" # Run the Bluetooth Link Key/PIN Code Manager (or NO).
196 bthcid_flags="" # Flags to bthcid (if enabled).
198 # Network Information Services (NIS) options: All need rpcbind_enable="YES" ###
199 nis_client_enable="NO" # We're an NIS client (or NO).
200 nis_client_flags="" # Flags to ypbind (if enabled).
201 nis_ypset_enable="NO" # Run ypset at boot time (or NO).
202 nis_ypset_flags="" # Flags to ypset (if enabled).
203 nis_server_enable="NO" # We're an NIS server (or NO).
204 nis_server_flags="" # Flags to ypserv (if enabled).
205 nis_ypxfrd_enable="NO" # Run rpc.ypxfrd at boot time (or NO).
206 nis_ypxfrd_flags="" # Flags to rpc.ypxfrd (if enabled).
207 nis_yppasswdd_enable="NO" # Run rpc.yppasswdd at boot time (or NO).
208 nis_yppasswdd_flags="" # Flags to rpc.yppasswdd (if enabled).
210 ### Network routing options: ###
211 defaultrouter="NO" # Set to default gateway (or NO).
212 static_routes="" # Set to static route list (or leave empty).
213 gateway_enable="NO" # Set to YES if this host will be a gateway.
214 router_enable="NO" # Set to YES to enable a routing daemon.
215 router_program="/sbin/routed" # Name of routing daemon to use if enabled.
216 router_flags="-q" # Flags for routing daemon.
217 mrouted_enable="NO" # Do multicast routing (see /etc/mrouted.conf).
218 mrouted_flags="" # Flags for multicast routing daemon.
219 arpproxy_all="NO" # replaces obsolete kernel option ARP_PROXYALL.
220 forward_sourceroute="NO" # do source routing (only if gateway_enable is set to "YES")
221 accept_sourceroute="NO" # accept source routed packets to us
223 ### Miscellaneous network options: ###
224 icmp_bmcastecho="NO" # respond to broadcast ping packets
226 ### IPv6 options: ###
227 ipv6_enable="NO" # Set to YES to set up for IPv6.
228 ipv6_network_interfaces="auto" # List of network interfaces (or "auto").
229 ipv6_defaultrouter="NO" # Set to IPv6 default gateway (or NO).
230 #ipv6_defaultrouter="2002:c058:6301::" # Use this for 6to4 (RFC 3068)
231 ipv6_static_routes="" # Set to static route list (or leave empty).
232 #ipv6_static_routes="xxx" # An example to set fec0:0000:0000:0006::/64
233 # route toward loopback interface.
234 #ipv6_route_xxx="fec0:0000:0000:0006:: -prefixlen 64 ::1"
235 ipv6_gateway_enable="NO" # Set to YES if this host will be a gateway.
236 ipv6_router_enable="NO" # Set to YES to enable an IPv6 routing daemon.
237 ipv6_router_program="/usr/sbin/route6d" # Name of IPv6 routing daemon.
238 ipv6_router_flags="" # Flags to IPv6 routing daemon.
239 #ipv6_router_flags="-l" # Example for route6d with only IPv6 site local
241 #ipv6_router_flags="-q" # If you want to run a routing daemon on an end
242 # node, you should stop advertisement.
243 #ipv6_network_interfaces="ed0 ep0" # Examples for router
244 # or static configuration for end node.
245 # Choose correct prefix value.
246 #ipv6_prefix_ed0="fec0:0000:0000:0001 fec0:0000:0000:0002" # Examples for rtr.
247 #ipv6_prefix_ep0="fec0:0000:0000:0003 fec0:0000:0000:0004" # Examples for rtr.
248 #ipv6_ifconfig_ed0="fec0:0:0:5::1 prefixlen 64" # Sample manual assign entry
249 #ipv6_ifconfig_ed0_alias0="fec0:0:0:5::2 prefixlen 64" # Sample alias entry.
250 ipv6_default_interface="NO" # Default output interface for scoped addrs.
251 # Now this works only for IPv6 link local
253 rtadvd_enable="NO" # Set to YES to enable an IPv6 router
254 # advertisement daemon. If set to YES,
255 # this router becomes a possible candidate
256 # IPv6 default router for local subnets.
257 rtadvd_interfaces="" # Interfaces rtadvd sends RA packets.
258 rtsold_enable="NO" # Set to YES to enable an IPv6 routing
259 # solicitation daemon. This is used for
260 # automatic discovery of non-link local
262 rtsold_flags="-a" # Do autoprobing of outgoing interface.
263 mroute6d_enable="NO" # Do IPv6 multicast routing.
264 mroute6d_program="/usr/local/sbin/pim6dd" # Name of IPv6 multicast
265 # routing daemon. You need to
266 # install it from package or
268 mroute6d_flags="" # Flags to IPv6 multicast routing daemon.
269 stf_interface_ipv4addr="" # Local IPv4 addr for 6to4 IPv6 over IPv4
270 # tunneling interface. Specify this entry
271 # to enable 6to4 interface.
272 stf_interface_ipv4plen="0" # Prefix length for 6to4 IPv4 addr,
273 # to limit peer addr range. Effective value
275 stf_interface_ipv6_ifid="0:0:0:1" # IPv6 interface id for stf0.
276 # If you like, you can set "AUTO" for this.
277 stf_interface_ipv6_slaid="0000" # IPv6 Site Level Aggregator for stf0
278 ipv6_firewall_enable="NO" # Set to YES to enable IPv6 firewall
280 ipv6_firewall_script="/etc/rc.firewall6" # Which script to run to set up the IPv6 firewall
281 ipv6_firewall_type="UNKNOWN" # IPv6 Firewall type (see /etc/rc.firewall6)
282 ipv6_firewall_quiet="NO" # Set to YES to suppress rule display
283 ipv6_firewall_logging="NO" # Set to YES to enable events logging
284 ipv6_firewall_flags="" # Flags passed to ip6fw when type is a file
286 ##############################################################
287 ### System console options #################################
288 ##############################################################
290 keymap="NO" # keymap in /usr/share/syscons/keymaps/* (or NO).
291 keyrate="NO" # keyboard rate to: slow, normal, fast (or NO).
292 keybell="NO" # See kbdcontrol(1) for options. Use "off" to disable.
293 keychange="NO" # function keys default values (or NO).
294 cursor="NO" # cursor type {normal|blink|destructive} (or NO).
295 scrnmap="NO" # screen map in /usr/share/syscons/scrnmaps/* (or NO).
296 font8x16="NO" # font 8x16 from /usr/share/syscons/fonts/* (or NO).
297 font8x14="NO" # font 8x14 from /usr/share/syscons/fonts/* (or NO).
298 font8x8="NO" # font 8x8 from /usr/share/syscons/fonts/* (or NO).
299 blanktime="300" # blank time (in seconds) or "NO" to turn it off.
300 saver="NO" # screen saver: Uses /modules/${saver}_saver.ko
301 moused_nondefault_enable="YES" # Treat non-default mice as enabled unless
302 # specifically overridden in rc.conf(5).
303 moused_enable="NO" # Run the mouse daemon.
304 moused_type="auto" # See man page for rc.conf(5) for available settings.
305 moused_port="/dev/psm0" # Set to your mouse port.
306 moused_flags="" # Any additional flags to moused.
307 mousechar_start="NO" # if 0xd0-0xd3 default range is occupied in your
308 # language code table, specify alternative range
309 # start like mousechar_start=3, see vidcontrol(1)
310 vidhistory="" # Set video history buffer size
311 allscreens_flags="" # Set this vidcontrol mode for all virtual screens
312 allscreens_kbdflags="" # Set this kbdcontrol mode for all virtual screens
315 ##############################################################
316 ### Mail Transfer Agent (MTA) options ######################
317 ##############################################################
319 mta_start_script="/etc/rc.sendmail"
320 # Script to start your chosen MTA, called by /etc/rc.
321 # Settings for /etc/rc.sendmail:
322 sendmail_enable="NO" # Run the sendmail inbound daemon (YES/NO).
323 sendmail_flags="-L sm-mta -bd -q30m" # Flags to sendmail (as a server)
324 sendmail_submit_enable="YES" # Start a localhost-only MTA for mail submission
325 sendmail_submit_flags="-L sm-mta -bd -q30m -ODaemonPortOptions=Addr=localhost"
326 # Flags for localhost-only MTA
327 sendmail_outbound_enable="YES" # Dequeue stuck mail (YES/NO).
328 sendmail_outbound_flags="-L sm-queue -q30m" # Flags to sendmail (outbound only)
329 sendmail_msp_queue_enable="YES" # Dequeue stuck clientmqueue mail (YES/NO).
330 sendmail_msp_queue_flags="-L sm-msp-queue -Ac -q30m"
331 # Flags for sendmail_msp_queue daemon.
332 sendmail_rebuild_aliases="YES" # Run newaliases if necessary (YES/NO).
335 ##############################################################
336 ### Miscellaneous administrative options ###################
337 ##############################################################
339 mixer_enable="YES" # Manage mixer settings across reboots
340 cron_enable="YES" # Run the periodic job daemon.
341 cron_program="/usr/sbin/cron" # Which cron executable to run (if enabled).
342 cron_flags="" # Which options to pass to the cron daemon.
343 lpd_enable="NO" # Run the line printer daemon.
344 lpd_program="/usr/sbin/lpd" # path to lpd, if you want a different one.
345 lpd_flags="" # Flags to lpd (if enabled).
346 nscd_enable="NO" # Run the nsswitch caching daemon.
347 devd_enable="YES" # Run devd, to trigger programs on device tree changes.
348 devd_flags="" # Additional flags for devd(8).
349 dumpdev="NO" # Device name to crashdump to (or NO).
350 dumpdir="/var/crash" # Directory where crash dumps are to be stored
351 savecore_flags="" # Used if dumpdev is enabled above, and present.
352 crashinfo_enable="YES" # Automatically generate crash dump summary.
353 crashinfo_program="/usr/sbin/crashinfo" # Script to generate crash dump summary.
354 enable_quotas="NO" # turn on quotas on startup (or NO).
355 check_quotas="YES" # Check quotas on startup (or NO).
356 accounting_enable="NO" # Turn on process accounting (or NO).
357 sysvipcd_enable="NO" # Run the System V IPC daemon at startup (or NO).
358 clear_tmp_enable="NO" # Clear /tmp at startup.
359 ldconfig_insecure="NO" # Set to YES to disable ldconfig security checks
360 ldconfig_paths="/lib /usr/lib /usr/local/lib /usr/pkg/lib"
361 # shared library search paths
362 ldconfig_local_dirs="/usr/local/libdata/ldconfig"
363 # Local directories with ldconfig configuration files.
364 kern_securelevel="-1" # range: -1..3 ; `-1' is the most insecure
365 update_motd="YES" # update version info in /etc/motd (or NO)
366 start_vinum="NO" # set to YES to start vinum
367 udevd_enable="NO" # Run udevd(8) daemon.
368 udevd_early="NO" # Run udevd(8) daemon early in boot (for lvm).
369 lvm_enable="NO" # Run LVM volume discovery.
370 entropy_file="/entropy" # Set to NO to disable caching entropy through reboots.
371 entropy_save_sz="16384" # Size of the entropy cache files (in bytes)
372 rand_irqs="NO" # Stir the entropy pool (like "5 11" or NO).
373 dmesg_enable="YES" # Save dmesg(8) to /var/run/dmesg.boot
374 newsyslog_enable="NO" # Run newsyslog at startup.
375 newsyslog_flags="" # Flags to newsyslog (if enabled).
376 resident_enable="NO" # Process /etc/resident.conf
377 varsym_enable="NO" # Process /etc/varsym.conf
378 watchdogd_enable="NO" # Start the software watchdog daemon
380 ##############################################################
381 ### Jail Configuration #######################################
382 ##############################################################
384 jail_enable="NO" # Set to NO to disable starting of any jails
385 jail_list="" # Space separated list of names of jails
386 jail_set_hostname_allow="YES" # Allow root user in a jail to change its hostname
387 jail_socket_unixiproute_only="YES" # Route only TCP/IP within a jail
388 jail_sysvipc_allow="NO" # Allow SystemV IPC use from within a jail
391 # To use rc's built-in jail infrastructure create entries for
392 # each jail, specified in jail_list, with the following variables.
394 # - replace 'example' with the jail's name.
395 # - except rootdir, hostname and ip, all of the following variables may be made
396 # global jail variables if you don't specify a jail name (ie. jail_interface).
398 #jail_example_rootdir="/usr/jail/default" # Jail's root directory
399 #jail_example_hostname="default.domain.com" # Jail's hostname
400 #jail_example_ip="192.168.0.10" # Jail's IP number
401 #jail_example_interface="" # Interface to create the IP alias on
402 #jail_example_exec_start="/bin/sh /etc/rc" # command to execute in jail for starting
403 #jail_example_exec_stop="/bin/sh /etc/rc.shutdown" # command to execute in jail for stopping
404 #jail_example_procfs_enable="NO" # mount procfs in jail
405 #jail_example_devfs_enable="NO" # mount devfs in jail
406 #jail_example_mount_enable="NO" # mount/umount jail's fs
407 #jail_example_fstab="" # fstab(5) for mount/umount
408 #jail_example_flags="-l -U root" # flags for jail(8)
410 ##############################################################
411 ### VFS quota options #######################################
412 ##############################################################
414 vfs_quota_enable="NO" # Set to YES to enable handling of these vfs quota options
415 vfs_quota_sync="" # Space separated list of mount points or "NO"
417 ##############################################################
418 ### VKernel options #########################################
419 ##############################################################
421 vkernel_enable="NO" # Set to YES to enable starting of vkernels
422 vkernel_list="" # Space separated list of names of vkernels
423 #vkernel_bin="/boot/kernel.VKERNEL64" # Default path to the vkernel binary
424 #vkernel_kill_timeout="45" # Default timeout before a SIGKILL is issued
426 vknetd_enable="NO" # Bridged networking
427 vknetd_flags="-U" # Bridged networking flags
429 # Create an entry for each vkernel specified in vkernel_list
430 # replacing 'example' by the name of the vkernel.
432 #vkernel_example_bin="/boot/kernel.VKERNEL64"
433 # Path to the vkernel binary
434 #vkernel_example_memsize="64m"
435 # Amount of memory for the vkernel
436 #vkernel_example_rootimg_list="/var/vkernel/rootimg.01"
437 # Space separated list of disk images
438 #vkernel_example_memimg="/var/vkernel/memimg.000000"
439 # Optional: Memory image file for vkernel
440 #vkernel_example_iface_list="auto:bridge0"
441 # Optional: space separated list network interfaces for the vkernel
442 #vkernel_example_logfile="/dev/null"
443 # Optional: path to the console log file
444 #vkernel_example_user="root"
445 # Optional: user that will run the vkernel
446 #vkernel_example_flags="-U"
447 # Optional: aditional flags to start the vkernel with
448 #vkernel_example_kill_timeout="45"
449 # Optional: timeout before SIGKILL is issued when stopping the vkernel
451 ##############################################################
452 ### Define source_rc_confs, the mechanism used by /etc/rc.* ##
453 ### scripts to source rc_conf_files overrides safely. ##
454 ##############################################################
456 if [ -z "${source_rc_confs_defined}" ]; then
457 source_rc_confs_defined=yes
459 local i sourced_files
460 for i in ${rc_conf_files}; do
461 case ${sourced_files} in
465 sourced_files="${sourced_files}:$i:"
projects / dragonfly.git / blob