2 * Copyright (c) 2007-2008 The DragonFly Project. All rights reserved.
4 * This code is derived from software contributed to The DragonFly Project
5 * by Matthew Dillon <dillon@backplane.com>
7 * Redistribution and use in source and binary forms, with or without
8 * modification, are permitted provided that the following conditions
11 * 1. Redistributions of source code must retain the above copyright
12 * notice, this list of conditions and the following disclaimer.
13 * 2. Redistributions in binary form must reproduce the above copyright
14 * notice, this list of conditions and the following disclaimer in
15 * the documentation and/or other materials provided with the
17 * 3. Neither the name of The DragonFly Project nor the names of its
18 * contributors may be used to endorse or promote products derived
19 * from this software without specific, prior written permission.
21 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
22 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
23 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
24 * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
25 * COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
26 * INCIDENTAL, SPECIAL, EXEMPLARY OR CONSEQUENTIAL DAMAGES (INCLUDING,
27 * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
28 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
29 * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
30 * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
31 * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
34 * $DragonFly: src/sys/vfs/hammer/hammer_transaction.c,v 1.25 2008/09/23 21:03:52 dillon Exp $
39 static hammer_tid_t hammer_alloc_tid(hammer_mount_t hmp, int count);
43 * Start a standard transaction.
46 hammer_start_transaction(struct hammer_transaction *trans,
47 struct hammer_mount *hmp)
52 trans->type = HAMMER_TRANS_STD;
54 trans->rootvol = hammer_get_root_volume(hmp, &error);
57 trans->sync_lock_refs = 0;
61 trans->time = (unsigned long)tv.tv_sec * 1000000ULL + tv.tv_usec;
62 trans->time32 = (u_int32_t)tv.tv_sec;
66 * Start a simple read-only transaction. This will not stall.
69 hammer_simple_transaction(struct hammer_transaction *trans,
70 struct hammer_mount *hmp)
75 trans->type = HAMMER_TRANS_RO;
77 trans->rootvol = hammer_get_root_volume(hmp, &error);
80 trans->sync_lock_refs = 0;
84 trans->time = (unsigned long)tv.tv_sec * 1000000ULL + tv.tv_usec;
85 trans->time32 = (u_int32_t)tv.tv_sec;
89 * Start a transaction using a particular TID. Used by the sync code.
90 * This does not stall.
92 * This routine may only be called from the flusher thread. We predispose
93 * sync_lock_refs, implying serialization against the synchronization stage
94 * (which the flusher is responsible for).
97 hammer_start_transaction_fls(struct hammer_transaction *trans,
98 struct hammer_mount *hmp)
103 bzero(trans, sizeof(*trans));
105 trans->type = HAMMER_TRANS_FLS;
107 trans->rootvol = hammer_get_root_volume(hmp, &error);
108 KKASSERT(error == 0);
109 trans->tid = hammer_alloc_tid(hmp, 1);
110 trans->sync_lock_refs = 1;
114 trans->time = (unsigned long)tv.tv_sec * 1000000ULL + tv.tv_usec;
115 trans->time32 = (u_int32_t)tv.tv_sec;
119 hammer_done_transaction(struct hammer_transaction *trans)
121 hammer_mount_t hmp = trans->hmp;
122 int expected_lock_refs;
124 hammer_rel_volume(trans->rootvol, 0);
125 trans->rootvol = NULL;
126 expected_lock_refs = (trans->type == HAMMER_TRANS_FLS) ? 1 : 0;
127 KKASSERT(trans->sync_lock_refs == expected_lock_refs);
128 trans->sync_lock_refs = 0;
129 if (trans->type != HAMMER_TRANS_FLS) {
130 if (trans->flags & HAMMER_TRANSF_NEWINODE)
131 hammer_inode_waitreclaims(hmp);
132 else if (trans->flags & HAMMER_TRANSF_DIDIO)
133 hammer_inode_waithard(hmp);
138 * Allocate (count) TIDs. If running in multi-master mode the returned
139 * base will be aligned to a 16-count plus the master id (0-15).
140 * Multi-master mode allows non-conflicting to run and new objects to be
141 * created on multiple masters in parallel. The transaction id identifies
142 * the original master. The object_id is also subject to this rule in
143 * order to allow objects to be created on multiple masters in parallel.
145 * Directories may pre-allocate a large number of object ids (100,000).
147 * NOTE: There is no longer a requirement that successive transaction
148 * ids be 2 apart for separator generation.
151 hammer_alloc_tid(hammer_mount_t hmp, int count)
155 if (hmp->master_id < 0) {
156 tid = hmp->next_tid + 1;
157 hmp->next_tid = tid + count;
159 tid = (hmp->next_tid + HAMMER_MAX_MASTERS) &
160 ~(hammer_tid_t)(HAMMER_MAX_MASTERS - 1);
161 hmp->next_tid = tid + count * HAMMER_MAX_MASTERS;
162 tid |= hmp->master_id;
164 if (tid >= 0xFFFFFFFFFF000000ULL)
165 panic("hammer_start_transaction: Ran out of TIDs!");
166 if (hammer_debug_tid)
167 kprintf("alloc_tid %016llx\n", tid);
172 * Allocate an object id
175 hammer_alloc_objid(hammer_mount_t hmp, hammer_inode_t dip)
177 hammer_objid_cache_t ocp;
180 while ((ocp = dip->objid_cache) == NULL) {
181 if (hmp->objid_cache_count < OBJID_CACHE_SIZE) {
182 ocp = kmalloc(sizeof(*ocp), hmp->m_misc,
184 ocp->next_tid = hammer_alloc_tid(hmp, OBJID_CACHE_BULK);
185 ocp->count = OBJID_CACHE_BULK;
186 TAILQ_INSERT_HEAD(&hmp->objid_cache_list, ocp, entry);
187 ++hmp->objid_cache_count;
188 /* may have blocked, recheck */
189 if (dip->objid_cache == NULL) {
190 dip->objid_cache = ocp;
194 ocp = TAILQ_FIRST(&hmp->objid_cache_list);
196 ocp->dip->objid_cache = NULL;
197 dip->objid_cache = ocp;
201 TAILQ_REMOVE(&hmp->objid_cache_list, ocp, entry);
204 * The TID is incremented by 1 or by 16 depending what mode the
205 * mount is operating in.
208 ocp->next_tid += (hmp->master_id < 0) ? 1 : HAMMER_MAX_MASTERS;
210 if (--ocp->count == 0) {
211 dip->objid_cache = NULL;
212 --hmp->objid_cache_count;
214 kfree(ocp, hmp->m_misc);
216 TAILQ_INSERT_TAIL(&hmp->objid_cache_list, ocp, entry);
222 hammer_clear_objid(hammer_inode_t dip)
224 hammer_objid_cache_t ocp;
226 if ((ocp = dip->objid_cache) != NULL) {
227 dip->objid_cache = NULL;
229 TAILQ_REMOVE(&dip->hmp->objid_cache_list, ocp, entry);
230 TAILQ_INSERT_HEAD(&dip->hmp->objid_cache_list, ocp, entry);
235 hammer_destroy_objid_cache(hammer_mount_t hmp)
237 hammer_objid_cache_t ocp;
239 while ((ocp = TAILQ_FIRST(&hmp->objid_cache_list)) != NULL) {
240 TAILQ_REMOVE(&hmp->objid_cache_list, ocp, entry);
242 ocp->dip->objid_cache = NULL;
243 kfree(ocp, hmp->m_misc);