1 /* $NetBSD: wi.c,v 1.109 2003/01/09 08:52:19 dyoung Exp $ */
4 * Copyright (c) 1997, 1998, 1999
5 * Bill Paul <wpaul@ctr.columbia.edu>. All rights reserved.
7 * Redistribution and use in source and binary forms, with or without
8 * modification, are permitted provided that the following conditions
10 * 1. Redistributions of source code must retain the above copyright
11 * notice, this list of conditions and the following disclaimer.
12 * 2. Redistributions in binary form must reproduce the above copyright
13 * notice, this list of conditions and the following disclaimer in the
14 * documentation and/or other materials provided with the distribution.
15 * 3. All advertising materials mentioning features or use of this software
16 * must display the following acknowledgement:
17 * This product includes software developed by Bill Paul.
18 * 4. Neither the name of the author nor the names of any co-contributors
19 * may be used to endorse or promote products derived from this software
20 * without specific prior written permission.
22 * THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND
23 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
24 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
25 * ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD
26 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
27 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
28 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
29 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
30 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
31 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
32 * THE POSSIBILITY OF SUCH DAMAGE.
34 * $FreeBSD: src/sys/dev/wi/if_wi.c,v 1.166 2004/04/01 00:38:45 sam Exp $
35 * $DragonFly: src/sys/dev/netif/wi/if_wi.c,v 1.35 2005/12/31 14:25:04 sephe Exp $
39 * Lucent WaveLAN/IEEE 802.11 PCMCIA driver.
41 * Original FreeBSD driver written by Bill Paul <wpaul@ctr.columbia.edu>
42 * Electrical Engineering Department
43 * Columbia University, New York City
47 * The WaveLAN/IEEE adapter is the second generation of the WaveLAN
48 * from Lucent. Unlike the older cards, the new ones are programmed
49 * entirely via a firmware-driven controller called the Hermes.
50 * Unfortunately, Lucent will not release the Hermes programming manual
51 * without an NDA (if at all). What they do release is an API library
52 * called the HCF (Hardware Control Functions) which is supposed to
53 * do the device-specific operations of a device driver for you. The
54 * publically available version of the HCF library (the 'HCF Light') is
55 * a) extremely gross, b) lacks certain features, particularly support
56 * for 802.11 frames, and c) is contaminated by the GNU Public License.
58 * This driver does not use the HCF or HCF Light at all. Instead, it
59 * programs the Hermes controller directly, using information gleaned
60 * from the HCF Light code and corresponding documentation.
62 * This driver supports the ISA, PCMCIA and PCI versions of the Lucent
63 * WaveLan cards (based on the Hermes chipset), as well as the newer
64 * Prism 2 chipsets with firmware from Intersil and Symbol.
67 #define WI_HERMES_AUTOINC_WAR /* Work around data write autoinc bug. */
68 #define WI_HERMES_STATS_WAR /* Work around stats counter bug. */
70 #include "opt_polling.h"
72 #include <sys/param.h>
73 #include <sys/endian.h>
74 #include <sys/systm.h>
75 #include <sys/sockio.h>
78 #include <sys/kernel.h>
79 #include <sys/socket.h>
80 #include <sys/module.h>
82 #include <sys/random.h>
83 #include <sys/syslog.h>
84 #include <sys/sysctl.h>
85 #include <sys/serialize.h>
86 #include <sys/thread2.h>
88 #include <machine/bus.h>
89 #include <machine/resource.h>
90 #include <machine/atomic.h>
94 #include <net/if_arp.h>
95 #include <net/ethernet.h>
96 #include <net/if_dl.h>
97 #include <net/if_media.h>
98 #include <net/if_types.h>
99 #include <net/ifq_var.h>
101 #include <netproto/802_11/ieee80211_var.h>
102 #include <netproto/802_11/ieee80211_ioctl.h>
103 #include <netproto/802_11/ieee80211_radiotap.h>
104 #include <netproto/802_11/if_wavelan_ieee.h>
106 #include <netinet/in.h>
107 #include <netinet/in_systm.h>
108 #include <netinet/in_var.h>
109 #include <netinet/ip.h>
110 #include <netinet/if_ether.h>
114 #include <dev/netif/wi/if_wireg.h>
115 #include <dev/netif/wi/if_wivar.h>
117 static void wi_start(struct ifnet *);
118 static int wi_reset(struct wi_softc *);
119 static void wi_watchdog(struct ifnet *);
120 static int wi_ioctl(struct ifnet *, u_long, caddr_t, struct ucred *);
121 static int wi_media_change(struct ifnet *);
122 static void wi_media_status(struct ifnet *, struct ifmediareq *);
124 static void wi_rx_intr(struct wi_softc *);
125 static void wi_tx_intr(struct wi_softc *);
126 static void wi_tx_ex_intr(struct wi_softc *);
127 static void wi_info_intr(struct wi_softc *);
129 static int wi_get_cfg(struct ifnet *, u_long, caddr_t, struct ucred *);
130 static int wi_set_cfg(struct ifnet *, u_long, caddr_t);
131 static int wi_write_txrate(struct wi_softc *);
132 static int wi_write_wep(struct wi_softc *);
133 static int wi_write_multi(struct wi_softc *);
134 static int wi_alloc_fid(struct wi_softc *, int, int *);
135 static void wi_read_nicid(struct wi_softc *);
136 static int wi_write_ssid(struct wi_softc *, int, u_int8_t *, int);
138 static int wi_cmd(struct wi_softc *, int, int, int, int);
139 static int wi_seek_bap(struct wi_softc *, int, int);
140 static int wi_read_bap(struct wi_softc *, int, int, void *, int);
141 static int wi_write_bap(struct wi_softc *, int, int, void *, int);
142 static int wi_mwrite_bap(struct wi_softc *, int, int, struct mbuf *, int);
143 static int wi_read_rid(struct wi_softc *, int, void *, int *);
144 static int wi_write_rid(struct wi_softc *, int, void *, int);
146 static int wi_newstate(struct ieee80211com *, enum ieee80211_state, int);
148 static int wi_scan_ap(struct wi_softc *, u_int16_t, u_int16_t);
149 static void wi_scan_result(struct wi_softc *, int, int);
151 static void wi_dump_pkt(struct wi_frame *, struct ieee80211_node *, int rssi);
153 static int wi_get_debug(struct wi_softc *, struct wi_req *);
154 static int wi_set_debug(struct wi_softc *, struct wi_req *);
156 /* support to download firmware for symbol CF card */
157 static int wi_symbol_write_firm(struct wi_softc *, const void *, int,
159 static int wi_symbol_set_hcr(struct wi_softc *, int);
160 #ifdef DEVICE_POLLING
161 static void wi_poll(struct ifnet *ifp, enum poll_cmd cmd, int count);
165 wi_write_val(struct wi_softc *sc, int rid, u_int16_t val)
169 return wi_write_rid(sc, rid, &val, sizeof(val));
172 SYSCTL_NODE(_hw, OID_AUTO, wi, CTLFLAG_RD, 0, "Wireless driver parameters");
174 static struct timeval lasttxerror; /* time of last tx error msg */
175 static int curtxeps; /* current tx error msgs/sec */
176 static int wi_txerate = 0; /* tx error rate: max msgs/sec */
177 SYSCTL_INT(_hw_wi, OID_AUTO, txerate, CTLFLAG_RW, &wi_txerate,
178 0, "max tx error msgs/sec; 0 to disable msgs");
182 static int wi_debug = 0;
183 SYSCTL_INT(_hw_wi, OID_AUTO, debug, CTLFLAG_RW, &wi_debug,
184 0, "control debugging printfs");
186 #define DPRINTF(X) if (wi_debug) if_printf X
187 #define DPRINTF2(X) if (wi_debug > 1) if_printf X
188 #define IFF_DUMPPKTS(_ifp) \
189 (((_ifp)->if_flags & (IFF_DEBUG|IFF_LINK2)) == (IFF_DEBUG|IFF_LINK2))
193 #define IFF_DUMPPKTS(_ifp) 0
196 #define WI_INTRS (WI_EV_RX | WI_EV_ALLOC | WI_EV_INFO)
198 struct wi_card_ident wi_card_ident[] = {
199 /* CARD_ID CARD_NAME FIRM_TYPE */
200 { WI_NIC_LUCENT_ID, WI_NIC_LUCENT_STR, WI_LUCENT },
201 { WI_NIC_SONY_ID, WI_NIC_SONY_STR, WI_LUCENT },
202 { WI_NIC_LUCENT_EMB_ID, WI_NIC_LUCENT_EMB_STR, WI_LUCENT },
203 { WI_NIC_EVB2_ID, WI_NIC_EVB2_STR, WI_INTERSIL },
204 { WI_NIC_HWB3763_ID, WI_NIC_HWB3763_STR, WI_INTERSIL },
205 { WI_NIC_HWB3163_ID, WI_NIC_HWB3163_STR, WI_INTERSIL },
206 { WI_NIC_HWB3163B_ID, WI_NIC_HWB3163B_STR, WI_INTERSIL },
207 { WI_NIC_EVB3_ID, WI_NIC_EVB3_STR, WI_INTERSIL },
208 { WI_NIC_HWB1153_ID, WI_NIC_HWB1153_STR, WI_INTERSIL },
209 { WI_NIC_P2_SST_ID, WI_NIC_P2_SST_STR, WI_INTERSIL },
210 { WI_NIC_EVB2_SST_ID, WI_NIC_EVB2_SST_STR, WI_INTERSIL },
211 { WI_NIC_3842_EVA_ID, WI_NIC_3842_EVA_STR, WI_INTERSIL },
212 { WI_NIC_3842_PCMCIA_AMD_ID, WI_NIC_3842_PCMCIA_STR, WI_INTERSIL },
213 { WI_NIC_3842_PCMCIA_SST_ID, WI_NIC_3842_PCMCIA_STR, WI_INTERSIL },
214 { WI_NIC_3842_PCMCIA_ATL_ID, WI_NIC_3842_PCMCIA_STR, WI_INTERSIL },
215 { WI_NIC_3842_PCMCIA_ATS_ID, WI_NIC_3842_PCMCIA_STR, WI_INTERSIL },
216 { WI_NIC_3842_MINI_AMD_ID, WI_NIC_3842_MINI_STR, WI_INTERSIL },
217 { WI_NIC_3842_MINI_SST_ID, WI_NIC_3842_MINI_STR, WI_INTERSIL },
218 { WI_NIC_3842_MINI_ATL_ID, WI_NIC_3842_MINI_STR, WI_INTERSIL },
219 { WI_NIC_3842_MINI_ATS_ID, WI_NIC_3842_MINI_STR, WI_INTERSIL },
220 { WI_NIC_3842_PCI_AMD_ID, WI_NIC_3842_PCI_STR, WI_INTERSIL },
221 { WI_NIC_3842_PCI_SST_ID, WI_NIC_3842_PCI_STR, WI_INTERSIL },
222 { WI_NIC_3842_PCI_ATS_ID, WI_NIC_3842_PCI_STR, WI_INTERSIL },
223 { WI_NIC_3842_PCI_ATL_ID, WI_NIC_3842_PCI_STR, WI_INTERSIL },
224 { WI_NIC_P3_PCMCIA_AMD_ID, WI_NIC_P3_PCMCIA_STR, WI_INTERSIL },
225 { WI_NIC_P3_PCMCIA_SST_ID, WI_NIC_P3_PCMCIA_STR, WI_INTERSIL },
226 { WI_NIC_P3_PCMCIA_ATL_ID, WI_NIC_P3_PCMCIA_STR, WI_INTERSIL },
227 { WI_NIC_P3_PCMCIA_ATS_ID, WI_NIC_P3_PCMCIA_STR, WI_INTERSIL },
228 { WI_NIC_P3_MINI_AMD_ID, WI_NIC_P3_MINI_STR, WI_INTERSIL },
229 { WI_NIC_P3_MINI_SST_ID, WI_NIC_P3_MINI_STR, WI_INTERSIL },
230 { WI_NIC_P3_MINI_ATL_ID, WI_NIC_P3_MINI_STR, WI_INTERSIL },
231 { WI_NIC_P3_MINI_ATS_ID, WI_NIC_P3_MINI_STR, WI_INTERSIL },
235 devclass_t wi_devclass;
238 wi_attach(device_t dev)
240 struct wi_softc *sc = device_get_softc(dev);
241 struct ieee80211com *ic = &sc->sc_ic;
242 struct ifnet *ifp = &ic->ic_if;
243 int i, nrates, buflen;
245 u_int8_t ratebuf[2 + IEEE80211_RATE_SIZE];
246 struct ieee80211_rateset *rs;
247 static const u_int8_t empty_macaddr[IEEE80211_ADDR_LEN] = {
248 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
253 if_initname(ifp, device_get_name(dev), device_get_unit(dev));
255 sc->wi_cmd_count = 500;
257 error = wi_reset(sc);
262 * Read the station address.
263 * And do it twice. I've seen PRISM-based cards that return
264 * an error when trying to read it the first time, which causes
267 buflen = IEEE80211_ADDR_LEN;
268 error = wi_read_rid(sc, WI_RID_MAC_NODE, ic->ic_myaddr, &buflen);
270 buflen = IEEE80211_ADDR_LEN;
271 error = wi_read_rid(sc, WI_RID_MAC_NODE, ic->ic_myaddr, &buflen);
274 device_printf(dev, "mac read failed %d\n", error);
277 if (IEEE80211_ADDR_EQ(ic->ic_myaddr, empty_macaddr)) {
278 device_printf(dev, "mac read failed (all zeros)\n");
283 /* Read NIC identification */
286 ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST;
287 ifp->if_ioctl = wi_ioctl;
288 ifp->if_start = wi_start;
289 ifp->if_watchdog = wi_watchdog;
290 ifp->if_init = wi_init;
291 ifq_set_maxlen(&ifp->if_snd, IFQ_MAXLEN);
292 ifq_set_ready(&ifp->if_snd);
293 #ifdef DEVICE_POLLING
294 ifp->if_poll = wi_poll;
296 ifp->if_capenable = ifp->if_capabilities;
298 ic->ic_phytype = IEEE80211_T_DS;
299 ic->ic_opmode = IEEE80211_M_STA;
300 ic->ic_caps = IEEE80211_C_PMGT | IEEE80211_C_AHDEMO;
301 ic->ic_state = IEEE80211_S_INIT;
304 * Query the card for available channels and setup the
305 * channel table. We assume these are all 11b channels.
307 buflen = sizeof(val);
308 if (wi_read_rid(sc, WI_RID_CHANNEL_LIST, &val, &buflen) != 0)
309 val = htole16(0x1fff); /* assume 1-11 */
310 KASSERT(val != 0, ("wi_attach: no available channels listed!"));
312 val <<= 1; /* shift for base 1 indices */
313 for (i = 1; i < 16; i++) {
314 if (isset((u_int8_t*)&val, i)) {
315 ic->ic_channels[i].ic_freq =
316 ieee80211_ieee2mhz(i, IEEE80211_CHAN_B);
317 ic->ic_channels[i].ic_flags = IEEE80211_CHAN_B;
322 * Read the default channel from the NIC. This may vary
323 * depending on the country where the NIC was purchased, so
324 * we can't hard-code a default and expect it to work for
327 * If no channel is specified, let the 802.11 code select.
329 buflen = sizeof(val);
330 if (wi_read_rid(sc, WI_RID_OWN_CHNL, &val, &buflen) == 0) {
332 KASSERT(val < IEEE80211_CHAN_MAX &&
333 ic->ic_channels[val].ic_flags != 0,
334 ("wi_attach: invalid own channel %u!", val));
335 ic->ic_ibss_chan = &ic->ic_channels[val];
338 "WI_RID_OWN_CHNL failed, using first channel!\n");
339 ic->ic_ibss_chan = &ic->ic_channels[0];
343 * Set flags based on firmware version.
345 switch (sc->sc_firmware_type) {
348 sc->sc_flags |= WI_FLAGS_HAS_SYSSCALE;
349 #ifdef WI_HERMES_AUTOINC_WAR
350 /* XXX: not confirmed, but never seen for recent firmware */
351 if (sc->sc_sta_firmware_ver < 40000) {
352 sc->sc_flags |= WI_FLAGS_BUG_AUTOINC;
355 if (sc->sc_sta_firmware_ver >= 60000)
356 sc->sc_flags |= WI_FLAGS_HAS_MOR;
357 if (sc->sc_sta_firmware_ver >= 60006) {
358 ic->ic_caps |= IEEE80211_C_IBSS;
359 ic->ic_caps |= IEEE80211_C_MONITOR;
361 sc->sc_ibss_port = htole16(1);
363 sc->sc_min_rssi = WI_LUCENT_MIN_RSSI;
364 sc->sc_max_rssi = WI_LUCENT_MAX_RSSI;
365 sc->sc_dbm_offset = WI_LUCENT_DBM_OFFSET;
369 sc->sc_ntxbuf = WI_NTXBUF;
370 sc->sc_flags |= WI_FLAGS_HAS_FRAGTHR;
371 sc->sc_flags |= WI_FLAGS_HAS_ROAMING;
372 sc->sc_flags |= WI_FLAGS_HAS_SYSSCALE;
374 * Old firmware are slow, so give peace a chance.
376 if (sc->sc_sta_firmware_ver < 10000)
377 sc->wi_cmd_count = 5000;
378 if (sc->sc_sta_firmware_ver > 10101)
379 sc->sc_flags |= WI_FLAGS_HAS_DBMADJUST;
380 if (sc->sc_sta_firmware_ver >= 800) {
381 ic->ic_caps |= IEEE80211_C_IBSS;
382 ic->ic_caps |= IEEE80211_C_MONITOR;
385 * version 0.8.3 and newer are the only ones that are known
386 * to currently work. Earlier versions can be made to work,
387 * at least according to the Linux driver.
389 if (sc->sc_sta_firmware_ver >= 803)
390 ic->ic_caps |= IEEE80211_C_HOSTAP;
391 sc->sc_ibss_port = htole16(0);
393 sc->sc_min_rssi = WI_PRISM_MIN_RSSI;
394 sc->sc_max_rssi = WI_PRISM_MAX_RSSI;
395 sc->sc_dbm_offset = WI_PRISM_DBM_OFFSET;
400 sc->sc_flags |= WI_FLAGS_HAS_DIVERSITY;
401 if (sc->sc_sta_firmware_ver >= 25000)
402 ic->ic_caps |= IEEE80211_C_IBSS;
403 sc->sc_ibss_port = htole16(4);
405 sc->sc_min_rssi = WI_PRISM_MIN_RSSI;
406 sc->sc_max_rssi = WI_PRISM_MAX_RSSI;
407 sc->sc_dbm_offset = WI_PRISM_DBM_OFFSET;
412 * Find out if we support WEP on this card.
414 buflen = sizeof(val);
415 if (wi_read_rid(sc, WI_RID_WEP_AVAIL, &val, &buflen) == 0 &&
417 ic->ic_caps |= IEEE80211_C_WEP;
419 /* Find supported rates. */
420 buflen = sizeof(ratebuf);
421 rs = &ic->ic_sup_rates[IEEE80211_MODE_11B];
422 if (wi_read_rid(sc, WI_RID_DATA_RATES, ratebuf, &buflen) == 0) {
423 nrates = le16toh(*(u_int16_t *)ratebuf);
424 if (nrates > IEEE80211_RATE_MAXSIZE)
425 nrates = IEEE80211_RATE_MAXSIZE;
427 for (i = 0; i < nrates; i++)
429 rs->rs_rates[rs->rs_nrates++] = ratebuf[2+i];
431 /* XXX fallback on error? */
435 buflen = sizeof(val);
436 if ((sc->sc_flags & WI_FLAGS_HAS_DBMADJUST) &&
437 wi_read_rid(sc, WI_RID_DBM_ADJUST, &val, &buflen) == 0) {
438 sc->sc_dbm_offset = le16toh(val);
441 sc->sc_max_datalen = 2304;
442 sc->sc_system_scale = 1;
443 sc->sc_cnfauthmode = IEEE80211_AUTH_OPEN;
444 sc->sc_roaming_mode = 1;
446 sc->sc_portnum = WI_DEFAULT_PORT;
447 sc->sc_authtype = WI_DEFAULT_AUTHTYPE;
449 bzero(sc->sc_nodename, sizeof(sc->sc_nodename));
450 sc->sc_nodelen = sizeof(WI_DEFAULT_NODENAME) - 1;
451 bcopy(WI_DEFAULT_NODENAME, sc->sc_nodename, sc->sc_nodelen);
453 bzero(sc->sc_net_name, sizeof(sc->sc_net_name));
454 bcopy(WI_DEFAULT_NETNAME, sc->sc_net_name,
455 sizeof(WI_DEFAULT_NETNAME) - 1);
458 * Call MI attach routine.
460 ieee80211_ifattach(ifp);
461 /* override state transition method */
462 sc->sc_newstate = ic->ic_newstate;
463 ic->ic_newstate = wi_newstate;
464 ieee80211_media_init(ifp, wi_media_change, wi_media_status);
466 bpfattach_dlt(ifp, DLT_IEEE802_11_RADIO,
467 sizeof(struct ieee80211_frame) + sizeof(sc->sc_tx_th),
470 * Initialize constant fields.
471 * XXX make header lengths a multiple of 32-bits so subsequent
472 * headers are properly aligned; this is a kludge to keep
473 * certain applications happy.
475 * NB: the channel is setup each time we transition to the
476 * RUN state to avoid filling it in for each frame.
478 sc->sc_tx_th_len = roundup(sizeof(sc->sc_tx_th), sizeof(u_int32_t));
479 sc->sc_tx_th.wt_ihdr.it_len = htole16(sc->sc_tx_th_len);
480 sc->sc_tx_th.wt_ihdr.it_present = htole32(WI_TX_RADIOTAP_PRESENT);
482 sc->sc_rx_th_len = roundup(sizeof(sc->sc_rx_th), sizeof(u_int32_t));
483 sc->sc_rx_th.wr_ihdr.it_len = htole16(sc->sc_rx_th_len);
484 sc->sc_rx_th.wr_ihdr.it_present = htole32(WI_RX_RADIOTAP_PRESENT);
487 error = bus_setup_intr(dev, sc->irq, INTR_MPSAFE,
488 wi_intr, sc, &sc->wi_intrhand,
491 ieee80211_ifdetach(ifp);
492 device_printf(dev, "bus_setup_intr() failed! (%d)\n", error);
504 wi_detach(device_t dev)
506 struct wi_softc *sc = device_get_softc(dev);
507 struct ifnet *ifp = &sc->sc_ic.ic_if;
509 lwkt_serialize_enter(ifp->if_serializer);
511 /* check if device was removed */
512 sc->wi_gone |= !bus_child_present(dev);
514 bus_teardown_intr(dev, sc->irq, sc->wi_intrhand);
516 lwkt_serialize_exit(ifp->if_serializer);
518 ieee80211_ifdetach(ifp);
524 wi_shutdown(device_t dev)
526 struct wi_softc *sc = device_get_softc(dev);
527 struct ifnet *ifp = &sc->sc_if;
529 lwkt_serialize_enter(ifp->if_serializer);
531 lwkt_serialize_exit(ifp->if_serializer);
534 #ifdef DEVICE_POLLING
537 wi_poll(struct ifnet *ifp, enum poll_cmd cmd, int count)
539 struct wi_softc *sc = ifp->if_softc;
544 /* disable interruptds */
545 CSR_WRITE_2(sc, WI_INT_EN, 0);
547 case POLL_DEREGISTER:
548 /* enable interrupts */
549 CSR_WRITE_2(sc, WI_INT_EN, WI_INTRS);
552 status = CSR_READ_2(sc, WI_EVENT_STAT);
554 if (status & WI_EV_RX)
556 if (status & WI_EV_ALLOC)
558 if (status & WI_EV_INFO)
561 if (cmd == POLL_AND_CHECK_STATUS) {
562 if (status & WI_EV_INFO)
566 if ((ifp->if_flags & IFF_OACTIVE) == 0 &&
567 (sc->sc_flags & WI_FLAGS_OUTRANGE) == 0 && !ifq_is_empty(&ifp->if_snd)) {
573 #endif /* DEVICE_POLLING */
578 struct wi_softc *sc = arg;
579 struct ifnet *ifp = &sc->sc_ic.ic_if;
582 if (sc->wi_gone || !sc->sc_enabled || (ifp->if_flags & IFF_UP) == 0) {
583 CSR_WRITE_2(sc, WI_INT_EN, 0);
584 CSR_WRITE_2(sc, WI_EVENT_ACK, 0xFFFF);
588 /* Disable interrupts. */
589 CSR_WRITE_2(sc, WI_INT_EN, 0);
591 status = CSR_READ_2(sc, WI_EVENT_STAT);
592 if (status & WI_EV_RX)
594 if (status & WI_EV_ALLOC)
596 if (status & WI_EV_TX_EXC)
598 if (status & WI_EV_INFO)
600 if ((ifp->if_flags & IFF_OACTIVE) == 0 &&
601 (sc->sc_flags & WI_FLAGS_OUTRANGE) == 0 &&
602 !ifq_is_empty(&ifp->if_snd))
605 /* Re-enable interrupts. */
606 CSR_WRITE_2(sc, WI_INT_EN, WI_INTRS);
614 struct wi_softc *sc = arg;
615 struct ifnet *ifp = &sc->sc_if;
616 struct ieee80211com *ic = &sc->sc_ic;
617 struct wi_joinreq join;
619 int error = 0, wasenabled;
624 if ((wasenabled = sc->sc_enabled))
628 /* common 802.11 configuration */
629 ic->ic_flags &= ~IEEE80211_F_IBSSON;
630 sc->sc_flags &= ~WI_FLAGS_OUTRANGE;
631 switch (ic->ic_opmode) {
632 case IEEE80211_M_STA:
633 wi_write_val(sc, WI_RID_PORTTYPE, WI_PORTTYPE_BSS);
635 case IEEE80211_M_IBSS:
636 wi_write_val(sc, WI_RID_PORTTYPE, sc->sc_ibss_port);
637 ic->ic_flags |= IEEE80211_F_IBSSON;
639 case IEEE80211_M_AHDEMO:
640 wi_write_val(sc, WI_RID_PORTTYPE, WI_PORTTYPE_ADHOC);
642 case IEEE80211_M_HOSTAP:
644 * For PRISM cards, override the empty SSID, because in
645 * HostAP mode the controller will lock up otherwise.
647 if (sc->sc_firmware_type == WI_INTERSIL &&
648 ic->ic_des_esslen == 0) {
649 ic->ic_des_essid[0] = ' ';
650 ic->ic_des_esslen = 1;
652 wi_write_val(sc, WI_RID_PORTTYPE, WI_PORTTYPE_HOSTAP);
654 case IEEE80211_M_MONITOR:
655 if (sc->sc_firmware_type == WI_LUCENT)
656 wi_write_val(sc, WI_RID_PORTTYPE, WI_PORTTYPE_ADHOC);
657 wi_cmd(sc, WI_CMD_DEBUG | (WI_TEST_MONITOR << 8), 0, 0, 0);
661 /* Intersil interprets this RID as joining ESS even in IBSS mode */
662 if (sc->sc_firmware_type == WI_LUCENT &&
663 (ic->ic_flags & IEEE80211_F_IBSSON) && ic->ic_des_esslen > 0)
664 wi_write_val(sc, WI_RID_CREATE_IBSS, 1);
666 wi_write_val(sc, WI_RID_CREATE_IBSS, 0);
667 wi_write_val(sc, WI_RID_MAX_SLEEP, ic->ic_lintval);
668 wi_write_ssid(sc, WI_RID_DESIRED_SSID, ic->ic_des_essid,
670 wi_write_val(sc, WI_RID_OWN_CHNL,
671 ieee80211_chan2ieee(ic, ic->ic_ibss_chan));
672 wi_write_ssid(sc, WI_RID_OWN_SSID, ic->ic_des_essid, ic->ic_des_esslen);
674 IEEE80211_ADDR_COPY(ic->ic_myaddr, IF_LLADDR(ifp));
675 wi_write_rid(sc, WI_RID_MAC_NODE, ic->ic_myaddr, IEEE80211_ADDR_LEN);
677 wi_write_val(sc, WI_RID_PM_ENABLED,
678 (ic->ic_flags & IEEE80211_F_PMGTON) ? 1 : 0);
680 /* not yet common 802.11 configuration */
681 wi_write_val(sc, WI_RID_MAX_DATALEN, sc->sc_max_datalen);
682 wi_write_val(sc, WI_RID_RTS_THRESH, ic->ic_rtsthreshold);
683 if (sc->sc_flags & WI_FLAGS_HAS_FRAGTHR)
684 wi_write_val(sc, WI_RID_FRAG_THRESH, ic->ic_fragthreshold);
686 /* driver specific 802.11 configuration */
687 if (sc->sc_flags & WI_FLAGS_HAS_SYSSCALE)
688 wi_write_val(sc, WI_RID_SYSTEM_SCALE, sc->sc_system_scale);
689 if (sc->sc_flags & WI_FLAGS_HAS_ROAMING)
690 wi_write_val(sc, WI_RID_ROAMING_MODE, sc->sc_roaming_mode);
691 if (sc->sc_flags & WI_FLAGS_HAS_MOR)
692 wi_write_val(sc, WI_RID_MICROWAVE_OVEN, sc->sc_microwave_oven);
694 wi_write_ssid(sc, WI_RID_NODENAME, sc->sc_nodename, sc->sc_nodelen);
696 if (ic->ic_opmode == IEEE80211_M_HOSTAP &&
697 sc->sc_firmware_type == WI_INTERSIL) {
698 wi_write_val(sc, WI_RID_OWN_BEACON_INT, ic->ic_lintval);
699 wi_write_val(sc, WI_RID_BASIC_RATE, 0x03); /* 1, 2 */
700 wi_write_val(sc, WI_RID_SUPPORT_RATE, 0x0f); /* 1, 2, 5.5, 11 */
701 wi_write_val(sc, WI_RID_DTIM_PERIOD, 1);
705 * Initialize promisc mode.
706 * Being in the Host-AP mode causes a great
707 * deal of pain if primisc mode is set.
708 * Therefore we avoid confusing the firmware
709 * and always reset promisc mode in Host-AP
710 * mode. Host-AP sees all the packets anyway.
712 if (ic->ic_opmode != IEEE80211_M_HOSTAP &&
713 (ifp->if_flags & IFF_PROMISC) != 0) {
714 wi_write_val(sc, WI_RID_PROMISC, 1);
716 wi_write_val(sc, WI_RID_PROMISC, 0);
720 if (ic->ic_caps & IEEE80211_C_WEP)
723 /* Set multicast filter. */
726 /* Allocate fids for the card */
727 if (sc->sc_firmware_type != WI_SYMBOL || !wasenabled) {
728 sc->sc_buflen = IEEE80211_MAX_LEN + sizeof(struct wi_frame);
729 if (sc->sc_firmware_type == WI_SYMBOL)
730 sc->sc_buflen = 1585; /* XXX */
731 for (i = 0; i < sc->sc_ntxbuf; i++) {
732 error = wi_alloc_fid(sc, sc->sc_buflen,
733 &sc->sc_txd[i].d_fid);
736 "tx buffer allocation failed (error %u)\n",
740 sc->sc_txd[i].d_len = 0;
743 sc->sc_txcur = sc->sc_txnext = 0;
745 /* Enable desired port */
746 wi_cmd(sc, WI_CMD_ENABLE | sc->sc_portnum, 0, 0, 0);
749 ifp->if_flags |= IFF_RUNNING;
750 ifp->if_flags &= ~IFF_OACTIVE;
751 if (ic->ic_opmode == IEEE80211_M_AHDEMO ||
752 ic->ic_opmode == IEEE80211_M_MONITOR ||
753 ic->ic_opmode == IEEE80211_M_HOSTAP)
754 ieee80211_new_state(ic, IEEE80211_S_RUN, -1);
756 /* Enable interrupts if not polling */
757 #ifdef DEVICE_POLLING
758 if ((ifp->if_flags & IFF_POLLING) == 0)
760 CSR_WRITE_2(sc, WI_INT_EN, WI_INTRS);
763 ic->ic_opmode == IEEE80211_M_HOSTAP &&
764 sc->sc_firmware_type == WI_INTERSIL) {
765 /* XXX: some card need to be re-enabled for hostap */
766 wi_cmd(sc, WI_CMD_DISABLE | WI_PORT0, 0, 0, 0);
767 wi_cmd(sc, WI_CMD_ENABLE | WI_PORT0, 0, 0, 0);
770 if (ic->ic_opmode == IEEE80211_M_STA &&
771 ((ic->ic_flags & IEEE80211_F_DESBSSID) ||
772 ic->ic_des_chan != IEEE80211_CHAN_ANYC)) {
773 memset(&join, 0, sizeof(join));
774 if (ic->ic_flags & IEEE80211_F_DESBSSID)
775 IEEE80211_ADDR_COPY(&join.wi_bssid, ic->ic_des_bssid);
776 if (ic->ic_des_chan != IEEE80211_CHAN_ANYC)
777 join.wi_chan = htole16(
778 ieee80211_chan2ieee(ic, ic->ic_des_chan));
779 /* Lucent firmware does not support the JOIN RID. */
780 if (sc->sc_firmware_type != WI_LUCENT)
781 wi_write_rid(sc, WI_RID_JOIN_REQ, &join, sizeof(join));
786 if_printf(ifp, "interface not running\n");
790 DPRINTF((ifp, "wi_init: return %d\n", error));
795 wi_stop(struct ifnet *ifp, int disable)
797 struct ieee80211com *ic = (struct ieee80211com *) ifp;
798 struct wi_softc *sc = ifp->if_softc;
802 ifp->if_flags &= ~(IFF_OACTIVE | IFF_RUNNING);
803 ieee80211_new_state(ic, IEEE80211_S_INIT, -1);
804 if (sc->sc_enabled && !sc->wi_gone) {
805 CSR_WRITE_2(sc, WI_INT_EN, 0);
806 wi_cmd(sc, WI_CMD_DISABLE | sc->sc_portnum, 0, 0, 0);
810 (*sc->sc_disable)(sc);
814 } else if (sc->wi_gone && disable) /* gone --> not enabled */
818 sc->sc_scan_timer = 0;
819 sc->sc_syn_timer = 0;
820 sc->sc_false_syns = 0;
826 wi_start(struct ifnet *ifp)
828 struct wi_softc *sc = ifp->if_softc;
829 struct ieee80211com *ic = &sc->sc_ic;
830 struct ieee80211_node *ni;
831 struct ieee80211_frame *wh;
833 struct wi_frame frmhdr;
834 int cur, fid, off, error;
839 if (sc->sc_flags & WI_FLAGS_OUTRANGE)
842 memset(&frmhdr, 0, sizeof(frmhdr));
845 IF_POLL(&ic->ic_mgtq, m0);
847 if (sc->sc_txd[cur].d_len != 0) {
848 ifp->if_flags |= IFF_OACTIVE;
851 IF_DEQUEUE(&ic->ic_mgtq, m0);
853 * Hack! The referenced node pointer is in the
854 * rcvif field of the packet header. This is
855 * placed there by ieee80211_mgmt_output because
856 * we need to hold the reference with the frame
857 * and there's no other way (other than packet
858 * tags which we consider too expensive to use)
861 ni = (struct ieee80211_node *) m0->m_pkthdr.rcvif;
862 m0->m_pkthdr.rcvif = NULL;
864 m_copydata(m0, 4, ETHER_ADDR_LEN * 2,
865 (caddr_t)&frmhdr.wi_ehdr);
866 frmhdr.wi_ehdr.ether_type = 0;
867 wh = mtod(m0, struct ieee80211_frame *);
869 if (ic->ic_state != IEEE80211_S_RUN)
871 m0 = ifq_poll(&ifp->if_snd);
874 if (sc->sc_txd[cur].d_len != 0) {
875 ifp->if_flags |= IFF_OACTIVE;
878 ifq_dequeue(&ifp->if_snd, m0);
880 m_copydata(m0, 0, ETHER_HDR_LEN,
881 (caddr_t)&frmhdr.wi_ehdr);
884 m0 = ieee80211_encap(ifp, m0, &ni);
889 wh = mtod(m0, struct ieee80211_frame *);
890 if (ic->ic_flags & IEEE80211_F_WEPON)
891 wh->i_fc[1] |= IEEE80211_FC1_WEP;
895 if (ic->ic_rawbpf != NULL)
896 bpf_mtap(ic->ic_rawbpf, m0);
898 frmhdr.wi_tx_ctl = htole16(WI_ENC_TX_802_11|WI_TXCNTL_TX_EX);
899 if (ic->ic_opmode == IEEE80211_M_HOSTAP &&
900 (wh->i_fc[1] & IEEE80211_FC1_WEP)) {
901 if ((m0 = ieee80211_wep_crypt(ifp, m0, 1)) == NULL) {
903 if (ni && ni != ic->ic_bss)
904 ieee80211_free_node(ic, ni);
907 frmhdr.wi_tx_ctl |= htole16(WI_TXCNTL_NOCRYPT);
911 sc->sc_tx_th.wt_rate =
912 ni->ni_rates.rs_rates[ni->ni_txrate];
913 bpf_ptap(sc->sc_drvbpf, m0, &sc->sc_tx_th,
917 m_copydata(m0, 0, sizeof(struct ieee80211_frame),
918 (caddr_t)&frmhdr.wi_whdr);
919 m_adj(m0, sizeof(struct ieee80211_frame));
920 frmhdr.wi_dat_len = htole16(m0->m_pkthdr.len);
921 if (IFF_DUMPPKTS(ifp))
922 wi_dump_pkt(&frmhdr, NULL, -1);
923 fid = sc->sc_txd[cur].d_fid;
924 off = sizeof(frmhdr);
925 error = wi_write_bap(sc, fid, 0, &frmhdr, sizeof(frmhdr)) != 0
926 || wi_mwrite_bap(sc, fid, off, m0, m0->m_pkthdr.len) != 0;
928 if (ni && ni != ic->ic_bss)
929 ieee80211_free_node(ic, ni);
934 sc->sc_txd[cur].d_len = off;
935 if (sc->sc_txcur == cur) {
936 if (wi_cmd(sc, WI_CMD_TX | WI_RECLAIM, fid, 0, 0)) {
937 if_printf(ifp, "xmit failed\n");
938 sc->sc_txd[cur].d_len = 0;
944 sc->sc_txnext = cur = (cur + 1) % sc->sc_ntxbuf;
949 wi_reset(struct wi_softc *sc)
951 struct ieee80211com *ic = &sc->sc_ic;
952 struct ifnet *ifp = &ic->ic_if;
953 #define WI_INIT_TRIES 3
958 /* Symbol firmware cannot be initialized more than once */
959 if (sc->sc_firmware_type == WI_SYMBOL && sc->sc_reset)
961 if (sc->sc_firmware_type == WI_SYMBOL)
964 tries = WI_INIT_TRIES;
966 for (i = 0; i < tries; i++) {
967 if ((error = wi_cmd(sc, WI_CMD_INI, 0, 0, 0)) == 0)
969 DELAY(WI_DELAY * 1000);
974 if_printf(ifp, "init failed\n");
978 CSR_WRITE_2(sc, WI_INT_EN, 0);
979 CSR_WRITE_2(sc, WI_EVENT_ACK, 0xFFFF);
981 /* Calibrate timer. */
982 wi_write_val(sc, WI_RID_TICK_TIME, 8);
989 wi_watchdog(struct ifnet *ifp)
991 struct wi_softc *sc = ifp->if_softc;
997 if (sc->sc_tx_timer) {
998 if (--sc->sc_tx_timer == 0) {
999 if_printf(ifp, "device timeout\n");
1001 wi_init(ifp->if_softc);
1007 if (sc->sc_scan_timer) {
1008 if (--sc->sc_scan_timer <= WI_SCAN_WAIT - WI_SCAN_INQWAIT &&
1009 sc->sc_firmware_type == WI_INTERSIL) {
1010 DPRINTF((ifp, "wi_watchdog: inquire scan\n"));
1011 wi_cmd(sc, WI_CMD_INQUIRE, WI_INFO_SCAN_RESULTS, 0, 0);
1013 if (sc->sc_scan_timer)
1017 if (sc->sc_syn_timer) {
1018 if (--sc->sc_syn_timer == 0) {
1019 struct ieee80211com *ic = (struct ieee80211com *) ifp;
1020 DPRINTF2((ifp, "wi_watchdog: %d false syns\n",
1021 sc->sc_false_syns));
1022 sc->sc_false_syns = 0;
1023 ieee80211_new_state(ic, IEEE80211_S_RUN, -1);
1024 sc->sc_syn_timer = 5;
1029 /* TODO: rate control */
1030 ieee80211_watchdog(ifp);
1034 wi_ioctl(struct ifnet *ifp, u_long cmd, caddr_t data, struct ucred *cr)
1036 struct wi_softc *sc = ifp->if_softc;
1037 struct ieee80211com *ic = &sc->sc_ic;
1038 struct ifreq *ifr = (struct ifreq *)data;
1039 struct ieee80211req *ireq;
1040 u_int8_t nodename[IEEE80211_NWID_LEN];
1052 * Can't do promisc and hostap at the same time. If all that's
1053 * changing is the promisc flag, try to short-circuit a call to
1054 * wi_init() by just setting PROMISC in the hardware.
1056 if (ifp->if_flags & IFF_UP) {
1057 if (ic->ic_opmode != IEEE80211_M_HOSTAP &&
1058 ifp->if_flags & IFF_RUNNING) {
1059 if (ifp->if_flags & IFF_PROMISC &&
1060 !(sc->sc_if_flags & IFF_PROMISC)) {
1061 wi_write_val(sc, WI_RID_PROMISC, 1);
1062 } else if (!(ifp->if_flags & IFF_PROMISC) &&
1063 sc->sc_if_flags & IFF_PROMISC) {
1064 wi_write_val(sc, WI_RID_PROMISC, 0);
1072 if (ifp->if_flags & IFF_RUNNING) {
1077 sc->sc_if_flags = ifp->if_flags;
1082 error = wi_write_multi(sc);
1084 case SIOCGIFGENERIC:
1085 error = wi_get_cfg(ifp, cmd, data, cr);
1087 case SIOCSIFGENERIC:
1088 error = suser_cred(cr, NULL_CRED_OKAY);
1091 error = wi_set_cfg(ifp, cmd, data);
1093 case SIOCGPRISM2DEBUG:
1094 error = copyin(ifr->ifr_data, &wreq, sizeof(wreq));
1097 if (!(ifp->if_flags & IFF_RUNNING) ||
1098 sc->sc_firmware_type == WI_LUCENT) {
1102 error = wi_get_debug(sc, &wreq);
1104 error = copyout(&wreq, ifr->ifr_data, sizeof(wreq));
1106 case SIOCSPRISM2DEBUG:
1107 if ((error = suser_cred(cr, NULL_CRED_OKAY)))
1109 error = copyin(ifr->ifr_data, &wreq, sizeof(wreq));
1112 error = wi_set_debug(sc, &wreq);
1115 ireq = (struct ieee80211req *) data;
1116 switch (ireq->i_type) {
1117 case IEEE80211_IOC_STATIONNAME:
1118 ireq->i_len = sc->sc_nodelen + 1;
1119 error = copyout(sc->sc_nodename, ireq->i_data,
1123 error = ieee80211_ioctl(ifp, cmd, data, cr);
1128 error = suser_cred(cr, NULL_CRED_OKAY);
1131 ireq = (struct ieee80211req *) data;
1132 switch (ireq->i_type) {
1133 case IEEE80211_IOC_STATIONNAME:
1134 if (ireq->i_val != 0 ||
1135 ireq->i_len > IEEE80211_NWID_LEN) {
1139 memset(nodename, 0, IEEE80211_NWID_LEN);
1140 error = copyin(ireq->i_data, nodename, ireq->i_len);
1143 if (sc->sc_enabled) {
1144 error = wi_write_ssid(sc, WI_RID_NODENAME,
1145 nodename, ireq->i_len);
1149 memcpy(sc->sc_nodename, nodename, IEEE80211_NWID_LEN);
1150 sc->sc_nodelen = ireq->i_len;
1153 error = ieee80211_ioctl(ifp, cmd, data, cr);
1158 if (ifp->if_flags & IFF_RUNNING)
1162 error = ieee80211_ioctl(ifp, cmd, data, cr);
1165 if (error == ENETRESET) {
1167 wi_init(sc); /* XXX no error return */
1175 wi_media_change(struct ifnet *ifp)
1177 struct wi_softc *sc = ifp->if_softc;
1180 error = ieee80211_media_change(ifp);
1181 if (error == ENETRESET) {
1183 wi_init(sc); /* XXX no error return */
1190 wi_media_status(struct ifnet *ifp, struct ifmediareq *imr)
1192 struct wi_softc *sc = ifp->if_softc;
1193 struct ieee80211com *ic = &sc->sc_ic;
1197 if (sc->wi_gone || !sc->sc_enabled) {
1198 imr->ifm_active = IFM_IEEE80211 | IFM_NONE;
1199 imr->ifm_status = 0;
1203 imr->ifm_status = IFM_AVALID;
1204 imr->ifm_active = IFM_IEEE80211;
1205 if (ic->ic_state == IEEE80211_S_RUN &&
1206 (sc->sc_flags & WI_FLAGS_OUTRANGE) == 0)
1207 imr->ifm_status |= IFM_ACTIVE;
1209 if (wi_read_rid(sc, WI_RID_CUR_TX_RATE, &val, &len) != 0)
1212 /* convert to 802.11 rate */
1214 if (sc->sc_firmware_type == WI_LUCENT) {
1216 rate = 11; /* 5.5Mbps */
1217 else if (rate == 5 * 2)
1218 rate = 22; /* 11Mbps */
1221 rate = 11; /* 5.5Mbps */
1222 else if (rate == 8*2)
1223 rate = 22; /* 11Mbps */
1226 imr->ifm_active |= ieee80211_rate2media(ic, rate, IEEE80211_MODE_11B);
1227 switch (ic->ic_opmode) {
1228 case IEEE80211_M_STA:
1230 case IEEE80211_M_IBSS:
1231 imr->ifm_active |= IFM_IEEE80211_ADHOC;
1233 case IEEE80211_M_AHDEMO:
1234 imr->ifm_active |= IFM_IEEE80211_ADHOC | IFM_FLAG0;
1236 case IEEE80211_M_HOSTAP:
1237 imr->ifm_active |= IFM_IEEE80211_HOSTAP;
1239 case IEEE80211_M_MONITOR:
1240 imr->ifm_active |= IFM_IEEE80211_MONITOR;
1246 wi_sync_bssid(struct wi_softc *sc, u_int8_t new_bssid[IEEE80211_ADDR_LEN])
1248 struct ieee80211com *ic = &sc->sc_ic;
1249 struct ieee80211_node *ni = ic->ic_bss;
1250 struct ifnet *ifp = &ic->ic_if;
1252 if (IEEE80211_ADDR_EQ(new_bssid, ni->ni_bssid))
1255 DPRINTF((ifp, "wi_sync_bssid: bssid %6D -> %6D ?\n", ni->ni_bssid, ":",
1258 /* In promiscuous mode, the BSSID field is not a reliable
1259 * indicator of the firmware's BSSID. Damp spurious
1260 * change-of-BSSID indications.
1262 if ((ifp->if_flags & IFF_PROMISC) != 0 &&
1263 sc->sc_false_syns >= WI_MAX_FALSE_SYNS)
1266 ieee80211_new_state(ic, IEEE80211_S_RUN, -1);
1270 wi_rx_monitor(struct wi_softc *sc, int fid)
1272 struct ieee80211com *ic = &sc->sc_ic;
1273 struct ifnet *ifp = &ic->ic_if;
1274 struct wi_frame *rx_frame;
1278 /* first allocate mbuf for packet storage */
1279 m = m_getcl(MB_DONTWAIT, MT_DATA, 0);
1285 m->m_pkthdr.rcvif = ifp;
1287 /* now read wi_frame first so we know how much data to read */
1288 if (wi_read_bap(sc, fid, 0, mtod(m, caddr_t), sizeof(*rx_frame))) {
1293 rx_frame = mtod(m, struct wi_frame *);
1295 switch ((rx_frame->wi_status & WI_STAT_MAC_PORT) >> 8) {
1297 switch (rx_frame->wi_whdr.i_fc[0] & IEEE80211_FC0_TYPE_MASK) {
1298 case IEEE80211_FC0_TYPE_DATA:
1299 hdrlen = WI_DATA_HDRLEN;
1300 datlen = rx_frame->wi_dat_len + WI_FCS_LEN;
1302 case IEEE80211_FC0_TYPE_MGT:
1303 hdrlen = WI_MGMT_HDRLEN;
1304 datlen = rx_frame->wi_dat_len + WI_FCS_LEN;
1306 case IEEE80211_FC0_TYPE_CTL:
1308 * prism2 cards don't pass control packets
1309 * down properly or consistently, so we'll only
1310 * pass down the header.
1312 hdrlen = WI_CTL_HDRLEN;
1316 if_printf(ifp, "received packet of unknown type "
1323 hdrlen = WI_DATA_HDRLEN;
1324 datlen = rx_frame->wi_dat_len + WI_FCS_LEN;
1327 if_printf(ifp, "received packet on invalid "
1328 "port (wi_status=0x%x)\n", rx_frame->wi_status);
1333 if (hdrlen + datlen + 2 > MCLBYTES) {
1334 if_printf(ifp, "oversized packet received "
1335 "(wi_dat_len=%d, wi_status=0x%x)\n",
1336 datlen, rx_frame->wi_status);
1341 if (wi_read_bap(sc, fid, hdrlen, mtod(m, caddr_t) + hdrlen,
1343 m->m_pkthdr.len = m->m_len = hdrlen + datlen;
1345 BPF_MTAP(ifp, m); /* Handle BPF listeners. */
1353 wi_rx_intr(struct wi_softc *sc)
1355 struct ieee80211com *ic = &sc->sc_ic;
1356 struct ifnet *ifp = &ic->ic_if;
1357 struct wi_frame frmhdr;
1359 struct ieee80211_frame *wh;
1360 struct ieee80211_node *ni;
1361 int fid, len, off, rssi;
1366 fid = CSR_READ_2(sc, WI_RX_FID);
1368 if (sc->wi_debug.wi_monitor) {
1370 * If we are in monitor mode just
1371 * read the data from the device.
1373 wi_rx_monitor(sc, fid);
1374 CSR_WRITE_2(sc, WI_EVENT_ACK, WI_EV_RX);
1378 /* First read in the frame header */
1379 if (wi_read_bap(sc, fid, 0, &frmhdr, sizeof(frmhdr))) {
1380 CSR_WRITE_2(sc, WI_EVENT_ACK, WI_EV_RX);
1382 DPRINTF((ifp, "wi_rx_intr: read fid %x failed\n", fid));
1386 if (IFF_DUMPPKTS(ifp))
1387 wi_dump_pkt(&frmhdr, NULL, frmhdr.wi_rx_signal);
1390 * Drop undecryptable or packets with receive errors here
1392 status = le16toh(frmhdr.wi_status);
1393 if (status & WI_STAT_ERRSTAT) {
1394 CSR_WRITE_2(sc, WI_EVENT_ACK, WI_EV_RX);
1396 DPRINTF((ifp, "wi_rx_intr: fid %x error status %x\n",
1400 rssi = frmhdr.wi_rx_signal;
1401 rstamp = (le16toh(frmhdr.wi_rx_tstamp0) << 16) |
1402 le16toh(frmhdr.wi_rx_tstamp1);
1404 len = le16toh(frmhdr.wi_dat_len);
1405 off = ALIGN(sizeof(struct ieee80211_frame));
1408 * Sometimes the PRISM2.x returns bogusly large frames. Except
1409 * in monitor mode, just throw them away.
1411 if (off + len > MCLBYTES) {
1412 if (ic->ic_opmode != IEEE80211_M_MONITOR) {
1413 CSR_WRITE_2(sc, WI_EVENT_ACK, WI_EV_RX);
1415 DPRINTF((ifp, "wi_rx_intr: oversized packet\n"));
1421 m = m_getl(off + len, MB_DONTWAIT, MT_DATA, M_PKTHDR, NULL);
1423 CSR_WRITE_2(sc, WI_EVENT_ACK, WI_EV_RX);
1425 DPRINTF((ifp, "wi_rx_intr: m_getl failed\n"));
1429 m->m_data += off - sizeof(struct ieee80211_frame);
1430 memcpy(m->m_data, &frmhdr.wi_whdr, sizeof(struct ieee80211_frame));
1431 wi_read_bap(sc, fid, sizeof(frmhdr),
1432 m->m_data + sizeof(struct ieee80211_frame), len);
1433 m->m_pkthdr.len = m->m_len = sizeof(struct ieee80211_frame) + len;
1434 m->m_pkthdr.rcvif = ifp;
1436 CSR_WRITE_2(sc, WI_EVENT_ACK, WI_EV_RX);
1438 if (sc->sc_drvbpf) {
1439 /* XXX replace divide by table */
1440 sc->sc_rx_th.wr_rate = frmhdr.wi_rx_rate / 5;
1441 sc->sc_rx_th.wr_antsignal = frmhdr.wi_rx_signal;
1442 sc->sc_rx_th.wr_antnoise = frmhdr.wi_rx_silence;
1443 sc->sc_rx_th.wr_flags = 0;
1444 if (frmhdr.wi_status & WI_STAT_PCF)
1445 sc->sc_rx_th.wr_flags |= IEEE80211_RADIOTAP_F_CFP;
1446 bpf_ptap(sc->sc_drvbpf, m, &sc->sc_rx_th, sc->sc_rx_th_len);
1449 wh = mtod(m, struct ieee80211_frame *);
1450 if (wh->i_fc[1] & IEEE80211_FC1_WEP) {
1452 * WEP is decrypted by hardware. Clear WEP bit
1453 * header for ieee80211_input().
1455 wh->i_fc[1] &= ~IEEE80211_FC1_WEP;
1458 /* synchronize driver's BSSID with firmware's BSSID */
1459 dir = wh->i_fc[1] & IEEE80211_FC1_DIR_MASK;
1460 if (ic->ic_opmode == IEEE80211_M_IBSS && dir == IEEE80211_FC1_DIR_NODS)
1461 wi_sync_bssid(sc, wh->i_addr3);
1464 * Locate the node for sender, track state, and
1465 * then pass this node (referenced) up to the 802.11
1466 * layer for its use. We are required to pass
1467 * something so we fallback to ic_bss when this frame
1468 * is from an unknown sender.
1470 if (ic->ic_opmode != IEEE80211_M_STA) {
1471 ni = ieee80211_find_node(ic, wh->i_addr2);
1473 ni = ieee80211_ref_node(ic->ic_bss);
1475 ni = ieee80211_ref_node(ic->ic_bss);
1477 * Send frame up for processing.
1479 ieee80211_input(ifp, m, ni, rssi, rstamp);
1481 * The frame may have caused the node to be marked for
1482 * reclamation (e.g. in response to a DEAUTH message)
1483 * so use free_node here instead of unref_node.
1485 if (ni == ic->ic_bss)
1486 ieee80211_unref_node(&ni);
1488 ieee80211_free_node(ic, ni);
1492 wi_tx_ex_intr(struct wi_softc *sc)
1494 struct ieee80211com *ic = &sc->sc_ic;
1495 struct ifnet *ifp = &ic->ic_if;
1496 struct wi_frame frmhdr;
1499 fid = CSR_READ_2(sc, WI_TX_CMP_FID);
1500 /* Read in the frame header */
1501 if (wi_read_bap(sc, fid, 0, &frmhdr, sizeof(frmhdr)) == 0) {
1502 u_int16_t status = le16toh(frmhdr.wi_status);
1505 * Spontaneous station disconnects appear as xmit
1506 * errors. Don't announce them and/or count them
1507 * as an output error.
1509 if ((status & WI_TXSTAT_DISCONNECT) == 0) {
1510 if (ppsratecheck(&lasttxerror, &curtxeps, wi_txerate)) {
1511 if_printf(ifp, "tx failed");
1512 if (status & WI_TXSTAT_RET_ERR)
1513 printf(", retry limit exceeded");
1514 if (status & WI_TXSTAT_AGED_ERR)
1515 printf(", max transmit lifetime exceeded");
1516 if (status & WI_TXSTAT_DISCONNECT)
1517 printf(", port disconnected");
1518 if (status & WI_TXSTAT_FORM_ERR)
1519 printf(", invalid format (data len %u src %6D)",
1520 le16toh(frmhdr.wi_dat_len),
1521 frmhdr.wi_ehdr.ether_shost, ":");
1523 printf(", status=0x%x", status);
1528 DPRINTF((ifp, "port disconnected\n"));
1529 ifp->if_collisions++; /* XXX */
1532 DPRINTF((ifp, "wi_tx_ex_intr: read fid %x failed\n", fid));
1533 CSR_WRITE_2(sc, WI_EVENT_ACK, WI_EV_TX_EXC);
1537 wi_tx_intr(struct wi_softc *sc)
1539 struct ieee80211com *ic = &sc->sc_ic;
1540 struct ifnet *ifp = &ic->ic_if;
1546 fid = CSR_READ_2(sc, WI_ALLOC_FID);
1547 CSR_WRITE_2(sc, WI_EVENT_ACK, WI_EV_ALLOC);
1550 if (sc->sc_txd[cur].d_fid != fid) {
1551 if_printf(ifp, "bad alloc %x != %x, cur %d nxt %d\n",
1552 fid, sc->sc_txd[cur].d_fid, cur, sc->sc_txnext);
1555 sc->sc_tx_timer = 0;
1556 sc->sc_txd[cur].d_len = 0;
1557 sc->sc_txcur = cur = (cur + 1) % sc->sc_ntxbuf;
1558 if (sc->sc_txd[cur].d_len == 0)
1559 ifp->if_flags &= ~IFF_OACTIVE;
1561 if (wi_cmd(sc, WI_CMD_TX | WI_RECLAIM, sc->sc_txd[cur].d_fid,
1563 if_printf(ifp, "xmit failed\n");
1564 sc->sc_txd[cur].d_len = 0;
1566 sc->sc_tx_timer = 5;
1573 wi_info_intr(struct wi_softc *sc)
1575 struct ieee80211com *ic = &sc->sc_ic;
1576 struct ifnet *ifp = &ic->ic_if;
1577 int i, fid, len, off;
1582 fid = CSR_READ_2(sc, WI_INFO_FID);
1583 wi_read_bap(sc, fid, 0, ltbuf, sizeof(ltbuf));
1585 switch (le16toh(ltbuf[1])) {
1587 case WI_INFO_LINK_STAT:
1588 wi_read_bap(sc, fid, sizeof(ltbuf), &stat, sizeof(stat));
1589 DPRINTF((ifp, "wi_info_intr: LINK_STAT 0x%x\n", le16toh(stat)));
1590 switch (le16toh(stat)) {
1591 case WI_INFO_LINK_STAT_CONNECTED:
1592 sc->sc_flags &= ~WI_FLAGS_OUTRANGE;
1593 if (ic->ic_state == IEEE80211_S_RUN &&
1594 ic->ic_opmode != IEEE80211_M_IBSS)
1597 case WI_INFO_LINK_STAT_AP_CHG:
1598 ieee80211_new_state(ic, IEEE80211_S_RUN, -1);
1600 case WI_INFO_LINK_STAT_AP_INR:
1601 sc->sc_flags &= ~WI_FLAGS_OUTRANGE;
1603 case WI_INFO_LINK_STAT_AP_OOR:
1604 if (sc->sc_firmware_type == WI_SYMBOL &&
1605 sc->sc_scan_timer > 0) {
1606 if (wi_cmd(sc, WI_CMD_INQUIRE,
1607 WI_INFO_HOST_SCAN_RESULTS, 0, 0) != 0)
1608 sc->sc_scan_timer = 0;
1611 if (ic->ic_opmode == IEEE80211_M_STA)
1612 sc->sc_flags |= WI_FLAGS_OUTRANGE;
1614 case WI_INFO_LINK_STAT_DISCONNECTED:
1615 case WI_INFO_LINK_STAT_ASSOC_FAILED:
1616 if (ic->ic_opmode == IEEE80211_M_STA)
1617 ieee80211_new_state(ic, IEEE80211_S_INIT, -1);
1622 case WI_INFO_COUNTERS:
1623 /* some card versions have a larger stats structure */
1624 len = min(le16toh(ltbuf[0]) - 1, sizeof(sc->sc_stats) / 4);
1625 ptr = (u_int32_t *)&sc->sc_stats;
1626 off = sizeof(ltbuf);
1627 for (i = 0; i < len; i++, off += 2, ptr++) {
1628 wi_read_bap(sc, fid, off, &stat, sizeof(stat));
1629 #ifdef WI_HERMES_STATS_WAR
1635 ifp->if_collisions = sc->sc_stats.wi_tx_single_retries +
1636 sc->sc_stats.wi_tx_multi_retries +
1637 sc->sc_stats.wi_tx_retry_limit;
1640 case WI_INFO_SCAN_RESULTS:
1641 case WI_INFO_HOST_SCAN_RESULTS:
1642 wi_scan_result(sc, fid, le16toh(ltbuf[0]));
1646 DPRINTF((ifp, "wi_info_intr: got fid %x type %x len %d\n", fid,
1647 le16toh(ltbuf[1]), le16toh(ltbuf[0])));
1650 CSR_WRITE_2(sc, WI_EVENT_ACK, WI_EV_INFO);
1654 wi_write_multi(struct wi_softc *sc)
1656 struct ifnet *ifp = &sc->sc_ic.ic_if;
1658 struct ifmultiaddr *ifma;
1659 struct wi_mcast mlist;
1661 if (ifp->if_flags & IFF_ALLMULTI || ifp->if_flags & IFF_PROMISC) {
1663 memset(&mlist, 0, sizeof(mlist));
1664 return wi_write_rid(sc, WI_RID_MCAST_LIST, &mlist,
1669 LIST_FOREACH(ifma, &ifp->if_multiaddrs, ifma_link) {
1670 if (ifma->ifma_addr->sa_family != AF_LINK)
1674 IEEE80211_ADDR_COPY(&mlist.wi_mcast[n],
1675 (LLADDR((struct sockaddr_dl *)ifma->ifma_addr)));
1678 return wi_write_rid(sc, WI_RID_MCAST_LIST, &mlist,
1679 IEEE80211_ADDR_LEN * n);
1683 wi_read_nicid(struct wi_softc *sc)
1685 struct wi_card_ident *id;
1690 /* getting chip identity */
1691 memset(ver, 0, sizeof(ver));
1693 wi_read_rid(sc, WI_RID_CARD_ID, ver, &len);
1694 if_printf(&sc->sc_ic.ic_if, "using ");
1696 sc->sc_firmware_type = WI_NOTYPE;
1697 for (id = wi_card_ident; id->card_name != NULL; id++) {
1698 if (le16toh(ver[0]) == id->card_id) {
1699 printf("%s", id->card_name);
1700 sc->sc_firmware_type = id->firm_type;
1704 if (sc->sc_firmware_type == WI_NOTYPE) {
1705 if (le16toh(ver[0]) & 0x8000) {
1706 printf("Unknown PRISM2 chip");
1707 sc->sc_firmware_type = WI_INTERSIL;
1709 printf("Unknown Lucent chip");
1710 sc->sc_firmware_type = WI_LUCENT;
1714 /* get primary firmware version (Only Prism chips) */
1715 if (sc->sc_firmware_type != WI_LUCENT) {
1716 memset(ver, 0, sizeof(ver));
1718 wi_read_rid(sc, WI_RID_PRI_IDENTITY, ver, &len);
1719 sc->sc_pri_firmware_ver = le16toh(ver[2]) * 10000 +
1720 le16toh(ver[3]) * 100 + le16toh(ver[1]);
1723 /* get station firmware version */
1724 memset(ver, 0, sizeof(ver));
1726 wi_read_rid(sc, WI_RID_STA_IDENTITY, ver, &len);
1727 sc->sc_sta_firmware_ver = le16toh(ver[2]) * 10000 +
1728 le16toh(ver[3]) * 100 + le16toh(ver[1]);
1729 if (sc->sc_firmware_type == WI_INTERSIL &&
1730 (sc->sc_sta_firmware_ver == 10102 ||
1731 sc->sc_sta_firmware_ver == 20102)) {
1733 memset(ident, 0, sizeof(ident));
1734 len = sizeof(ident);
1735 /* value should be the format like "V2.00-11" */
1736 if (wi_read_rid(sc, WI_RID_SYMBOL_IDENTITY, ident, &len) == 0 &&
1737 *(p = (char *)ident) >= 'A' &&
1738 p[2] == '.' && p[5] == '-' && p[8] == '\0') {
1739 sc->sc_firmware_type = WI_SYMBOL;
1740 sc->sc_sta_firmware_ver = (p[1] - '0') * 10000 +
1741 (p[3] - '0') * 1000 + (p[4] - '0') * 100 +
1742 (p[6] - '0') * 10 + (p[7] - '0');
1746 if_printf(&sc->sc_ic.ic_if, "%s Firmware: ",
1747 sc->sc_firmware_type == WI_LUCENT ? "Lucent" :
1748 (sc->sc_firmware_type == WI_SYMBOL ? "Symbol" : "Intersil"));
1749 if (sc->sc_firmware_type != WI_LUCENT) /* XXX */
1750 printf("Primary (%u.%u.%u), ",
1751 sc->sc_pri_firmware_ver / 10000,
1752 (sc->sc_pri_firmware_ver % 10000) / 100,
1753 sc->sc_pri_firmware_ver % 100);
1754 printf("Station (%u.%u.%u)\n",
1755 sc->sc_sta_firmware_ver / 10000,
1756 (sc->sc_sta_firmware_ver % 10000) / 100,
1757 sc->sc_sta_firmware_ver % 100);
1761 wi_write_ssid(struct wi_softc *sc, int rid, u_int8_t *buf, int buflen)
1763 struct wi_ssid ssid;
1765 if (buflen > IEEE80211_NWID_LEN)
1767 memset(&ssid, 0, sizeof(ssid));
1768 ssid.wi_len = htole16(buflen);
1769 memcpy(ssid.wi_ssid, buf, buflen);
1770 return wi_write_rid(sc, rid, &ssid, sizeof(ssid));
1774 wi_get_cfg(struct ifnet *ifp, u_long cmd, caddr_t data, struct ucred *cr)
1776 struct wi_softc *sc = ifp->if_softc;
1777 struct ieee80211com *ic = &sc->sc_ic;
1778 struct ifreq *ifr = (struct ifreq *)data;
1780 struct wi_scan_res *res;
1782 int len, n, error, mif, val, off, i;
1784 error = copyin(ifr->ifr_data, &wreq, sizeof(wreq));
1787 len = (wreq.wi_len - 1) * 2;
1788 if (len < sizeof(u_int16_t))
1790 if (len > sizeof(wreq.wi_val))
1791 len = sizeof(wreq.wi_val);
1793 switch (wreq.wi_type) {
1795 case WI_RID_IFACE_STATS:
1796 memcpy(wreq.wi_val, &sc->sc_stats, sizeof(sc->sc_stats));
1797 if (len < sizeof(sc->sc_stats))
1800 len = sizeof(sc->sc_stats);
1803 case WI_RID_ENCRYPTION:
1804 case WI_RID_TX_CRYPT_KEY:
1805 case WI_RID_DEFLT_CRYPT_KEYS:
1806 case WI_RID_TX_RATE:
1807 return ieee80211_cfgget(ifp, cmd, data, cr);
1809 case WI_RID_MICROWAVE_OVEN:
1810 if (sc->sc_enabled && (sc->sc_flags & WI_FLAGS_HAS_MOR)) {
1811 error = wi_read_rid(sc, wreq.wi_type, wreq.wi_val,
1815 wreq.wi_val[0] = htole16(sc->sc_microwave_oven);
1816 len = sizeof(u_int16_t);
1819 case WI_RID_DBM_ADJUST:
1820 if (sc->sc_enabled && (sc->sc_flags & WI_FLAGS_HAS_DBMADJUST)) {
1821 error = wi_read_rid(sc, wreq.wi_type, wreq.wi_val,
1825 wreq.wi_val[0] = htole16(sc->sc_dbm_offset);
1826 len = sizeof(u_int16_t);
1829 case WI_RID_ROAMING_MODE:
1830 if (sc->sc_enabled && (sc->sc_flags & WI_FLAGS_HAS_ROAMING)) {
1831 error = wi_read_rid(sc, wreq.wi_type, wreq.wi_val,
1835 wreq.wi_val[0] = htole16(sc->sc_roaming_mode);
1836 len = sizeof(u_int16_t);
1839 case WI_RID_SYSTEM_SCALE:
1840 if (sc->sc_enabled && (sc->sc_flags & WI_FLAGS_HAS_SYSSCALE)) {
1841 error = wi_read_rid(sc, wreq.wi_type, wreq.wi_val,
1845 wreq.wi_val[0] = htole16(sc->sc_system_scale);
1846 len = sizeof(u_int16_t);
1849 case WI_RID_FRAG_THRESH:
1850 if (sc->sc_enabled && (sc->sc_flags & WI_FLAGS_HAS_FRAGTHR)) {
1851 error = wi_read_rid(sc, wreq.wi_type, wreq.wi_val,
1855 wreq.wi_val[0] = htole16(ic->ic_fragthreshold);
1856 len = sizeof(u_int16_t);
1859 case WI_RID_READ_APS:
1860 if (ic->ic_opmode == IEEE80211_M_HOSTAP)
1861 return ieee80211_cfgget(ifp, cmd, data, cr);
1862 if (sc->sc_scan_timer > 0) {
1863 error = EINPROGRESS;
1867 if (len < sizeof(n)) {
1871 if (len < sizeof(n) + sizeof(struct wi_apinfo) * n)
1872 n = (len - sizeof(n)) / sizeof(struct wi_apinfo);
1873 len = sizeof(n) + sizeof(struct wi_apinfo) * n;
1874 memcpy(wreq.wi_val, &n, sizeof(n));
1875 memcpy((caddr_t)wreq.wi_val + sizeof(n), sc->sc_aps,
1876 sizeof(struct wi_apinfo) * n);
1880 wreq.wi_val[0] = sc->sc_firmware_type != WI_LUCENT;
1881 len = sizeof(u_int16_t);
1885 mif = wreq.wi_val[0];
1886 error = wi_cmd(sc, WI_CMD_READMIF, mif, 0, 0);
1887 val = CSR_READ_2(sc, WI_RESP0);
1888 wreq.wi_val[0] = val;
1889 len = sizeof(u_int16_t);
1892 case WI_RID_ZERO_CACHE:
1893 case WI_RID_PROCFRAME: /* ignore for compatibility */
1897 case WI_RID_READ_CACHE:
1898 return ieee80211_cfgget(ifp, cmd, data, cr);
1900 case WI_RID_SCAN_RES: /* compatibility interface */
1901 if (ic->ic_opmode == IEEE80211_M_HOSTAP)
1902 return ieee80211_cfgget(ifp, cmd, data, cr);
1903 if (sc->sc_scan_timer > 0) {
1904 error = EINPROGRESS;
1908 if (sc->sc_firmware_type == WI_LUCENT) {
1910 reslen = WI_WAVELAN_RES_SIZE;
1912 off = sizeof(struct wi_scan_p2_hdr);
1913 reslen = WI_PRISM2_RES_SIZE;
1915 if (len < off + reslen * n)
1916 n = (len - off) / reslen;
1917 len = off + reslen * n;
1919 struct wi_scan_p2_hdr *p2 = (struct wi_scan_p2_hdr *)wreq.wi_val;
1921 * Prepend Prism-specific header.
1923 if (len < sizeof(struct wi_scan_p2_hdr)) {
1927 p2 = (struct wi_scan_p2_hdr *)wreq.wi_val;
1929 p2->wi_reason = n; /* XXX */
1931 for (i = 0; i < n; i++, off += reslen) {
1932 const struct wi_apinfo *ap = &sc->sc_aps[i];
1934 res = (struct wi_scan_res *)((char *)wreq.wi_val + off);
1935 res->wi_chan = ap->channel;
1936 res->wi_noise = ap->noise;
1937 res->wi_signal = ap->signal;
1938 IEEE80211_ADDR_COPY(res->wi_bssid, ap->bssid);
1939 res->wi_interval = ap->interval;
1940 res->wi_capinfo = ap->capinfo;
1941 res->wi_ssid_len = ap->namelen;
1942 memcpy(res->wi_ssid, ap->name,
1943 IEEE80211_NWID_LEN);
1944 if (sc->sc_firmware_type != WI_LUCENT) {
1945 /* XXX not saved from Prism cards */
1946 memset(res->wi_srates, 0,
1947 sizeof(res->wi_srates));
1948 res->wi_rate = ap->rate;
1955 if (sc->sc_enabled) {
1956 error = wi_read_rid(sc, wreq.wi_type, wreq.wi_val,
1960 switch (wreq.wi_type) {
1961 case WI_RID_MAX_DATALEN:
1962 wreq.wi_val[0] = htole16(sc->sc_max_datalen);
1963 len = sizeof(u_int16_t);
1965 case WI_RID_RTS_THRESH:
1966 wreq.wi_val[0] = htole16(ic->ic_rtsthreshold);
1967 len = sizeof(u_int16_t);
1969 case WI_RID_CNFAUTHMODE:
1970 wreq.wi_val[0] = htole16(sc->sc_cnfauthmode);
1971 len = sizeof(u_int16_t);
1973 case WI_RID_NODENAME:
1974 if (len < sc->sc_nodelen + sizeof(u_int16_t)) {
1978 len = sc->sc_nodelen + sizeof(u_int16_t);
1979 wreq.wi_val[0] = htole16((sc->sc_nodelen + 1) / 2);
1980 memcpy(&wreq.wi_val[1], sc->sc_nodename,
1984 return ieee80211_cfgget(ifp, cmd, data, cr);
1990 wreq.wi_len = (len + 1) / 2 + 1;
1991 return copyout(&wreq, ifr->ifr_data, (wreq.wi_len + 1) * 2);
1995 wi_set_cfg(struct ifnet *ifp, u_long cmd, caddr_t data)
1997 struct wi_softc *sc = ifp->if_softc;
1998 struct ieee80211com *ic = &sc->sc_ic;
1999 struct ifreq *ifr = (struct ifreq *)data;
2002 int i, len, error, mif, val;
2003 struct ieee80211_rateset *rs;
2005 error = copyin(ifr->ifr_data, &wreq, sizeof(wreq));
2008 len = wreq.wi_len ? (wreq.wi_len - 1) * 2 : 0;
2009 switch (wreq.wi_type) {
2010 case WI_RID_DBM_ADJUST:
2013 case WI_RID_NODENAME:
2014 if (le16toh(wreq.wi_val[0]) * 2 > len ||
2015 le16toh(wreq.wi_val[0]) > sizeof(sc->sc_nodename)) {
2019 if (sc->sc_enabled) {
2020 error = wi_write_rid(sc, wreq.wi_type, wreq.wi_val,
2025 sc->sc_nodelen = le16toh(wreq.wi_val[0]) * 2;
2026 memcpy(sc->sc_nodename, &wreq.wi_val[1], sc->sc_nodelen);
2029 case WI_RID_MICROWAVE_OVEN:
2030 case WI_RID_ROAMING_MODE:
2031 case WI_RID_SYSTEM_SCALE:
2032 case WI_RID_FRAG_THRESH:
2033 if (wreq.wi_type == WI_RID_MICROWAVE_OVEN &&
2034 (sc->sc_flags & WI_FLAGS_HAS_MOR) == 0)
2036 if (wreq.wi_type == WI_RID_ROAMING_MODE &&
2037 (sc->sc_flags & WI_FLAGS_HAS_ROAMING) == 0)
2039 if (wreq.wi_type == WI_RID_SYSTEM_SCALE &&
2040 (sc->sc_flags & WI_FLAGS_HAS_SYSSCALE) == 0)
2042 if (wreq.wi_type == WI_RID_FRAG_THRESH &&
2043 (sc->sc_flags & WI_FLAGS_HAS_FRAGTHR) == 0)
2046 case WI_RID_RTS_THRESH:
2047 case WI_RID_CNFAUTHMODE:
2048 case WI_RID_MAX_DATALEN:
2049 if (sc->sc_enabled) {
2050 error = wi_write_rid(sc, wreq.wi_type, wreq.wi_val,
2055 switch (wreq.wi_type) {
2056 case WI_RID_FRAG_THRESH:
2057 ic->ic_fragthreshold = le16toh(wreq.wi_val[0]);
2059 case WI_RID_RTS_THRESH:
2060 ic->ic_rtsthreshold = le16toh(wreq.wi_val[0]);
2062 case WI_RID_MICROWAVE_OVEN:
2063 sc->sc_microwave_oven = le16toh(wreq.wi_val[0]);
2065 case WI_RID_ROAMING_MODE:
2066 sc->sc_roaming_mode = le16toh(wreq.wi_val[0]);
2068 case WI_RID_SYSTEM_SCALE:
2069 sc->sc_system_scale = le16toh(wreq.wi_val[0]);
2071 case WI_RID_CNFAUTHMODE:
2072 sc->sc_cnfauthmode = le16toh(wreq.wi_val[0]);
2074 case WI_RID_MAX_DATALEN:
2075 sc->sc_max_datalen = le16toh(wreq.wi_val[0]);
2080 case WI_RID_TX_RATE:
2081 switch (le16toh(wreq.wi_val[0])) {
2083 ic->ic_fixed_rate = -1;
2086 rs = &ic->ic_sup_rates[IEEE80211_MODE_11B];
2087 for (i = 0; i < rs->rs_nrates; i++) {
2088 if ((rs->rs_rates[i] & IEEE80211_RATE_VAL)
2089 / 2 == le16toh(wreq.wi_val[0]))
2092 if (i == rs->rs_nrates)
2094 ic->ic_fixed_rate = i;
2097 error = wi_write_txrate(sc);
2100 case WI_RID_SCAN_APS:
2101 if (sc->sc_enabled && ic->ic_opmode != IEEE80211_M_HOSTAP)
2102 error = wi_scan_ap(sc, 0x3fff, 0x000f);
2105 case WI_RID_SCAN_REQ: /* compatibility interface */
2106 if (sc->sc_enabled && ic->ic_opmode != IEEE80211_M_HOSTAP)
2107 error = wi_scan_ap(sc, wreq.wi_val[0], wreq.wi_val[1]);
2110 case WI_RID_MGMT_XMIT:
2111 if (!sc->sc_enabled) {
2115 if (ic->ic_mgtq.ifq_len > 5) {
2119 /* XXX wi_len looks in u_int8_t, not in u_int16_t */
2120 m = m_devget((char *)&wreq.wi_val, wreq.wi_len, 0, ifp, NULL);
2125 IF_ENQUEUE(&ic->ic_mgtq, m);
2129 mif = wreq.wi_val[0];
2130 val = wreq.wi_val[1];
2131 error = wi_cmd(sc, WI_CMD_WRITEMIF, mif, val, 0);
2134 case WI_RID_PROCFRAME: /* ignore for compatibility */
2137 case WI_RID_OWN_SSID:
2138 if (le16toh(wreq.wi_val[0]) * 2 > len ||
2139 le16toh(wreq.wi_val[0]) > IEEE80211_NWID_LEN) {
2143 memset(ic->ic_des_essid, 0, IEEE80211_NWID_LEN);
2144 ic->ic_des_esslen = le16toh(wreq.wi_val[0]) * 2;
2145 memcpy(ic->ic_des_essid, &wreq.wi_val[1], ic->ic_des_esslen);
2150 if (sc->sc_enabled) {
2151 error = wi_write_rid(sc, wreq.wi_type, wreq.wi_val,
2156 error = ieee80211_cfgset(ifp, cmd, data);
2163 wi_write_txrate(struct wi_softc *sc)
2165 struct ieee80211com *ic = &sc->sc_ic;
2169 if (ic->ic_fixed_rate < 0)
2170 rate = 0; /* auto */
2172 rate = (ic->ic_sup_rates[IEEE80211_MODE_11B].rs_rates[ic->ic_fixed_rate] &
2173 IEEE80211_RATE_VAL) / 2;
2175 /* rate: 0, 1, 2, 5, 11 */
2177 switch (sc->sc_firmware_type) {
2180 case 0: /* auto == 11mbps auto */
2183 /* case 1, 2 map to 1, 2*/
2184 case 5: /* 5.5Mbps -> 4 */
2187 case 11: /* 11mbps -> 5 */
2195 /* Choose a bit according to this table.
2198 * ----+-------------------
2204 for (i = 8; i > 0; i >>= 1) {
2209 rate = 0xf; /* auto */
2214 return wi_write_val(sc, WI_RID_TX_RATE, rate);
2218 wi_write_wep(struct wi_softc *sc)
2220 struct ieee80211com *ic = &sc->sc_ic;
2224 struct wi_key wkey[IEEE80211_WEP_NKID];
2226 switch (sc->sc_firmware_type) {
2228 val = (ic->ic_flags & IEEE80211_F_WEPON) ? 1 : 0;
2229 error = wi_write_val(sc, WI_RID_ENCRYPTION, val);
2232 error = wi_write_val(sc, WI_RID_TX_CRYPT_KEY, ic->ic_wep_txkey);
2235 memset(wkey, 0, sizeof(wkey));
2236 for (i = 0; i < IEEE80211_WEP_NKID; i++) {
2237 keylen = ic->ic_nw_keys[i].wk_len;
2238 wkey[i].wi_keylen = htole16(keylen);
2239 memcpy(wkey[i].wi_keydat, ic->ic_nw_keys[i].wk_key,
2242 error = wi_write_rid(sc, WI_RID_DEFLT_CRYPT_KEYS,
2243 wkey, sizeof(wkey));
2248 if (ic->ic_flags & IEEE80211_F_WEPON) {
2250 * ONLY HWB3163 EVAL-CARD Firmware version
2251 * less than 0.8 variant2
2253 * If promiscuous mode disable, Prism2 chip
2254 * does not work with WEP .
2255 * It is under investigation for details.
2256 * (ichiro@netbsd.org)
2258 if (sc->sc_firmware_type == WI_INTERSIL &&
2259 sc->sc_sta_firmware_ver < 802 ) {
2260 /* firm ver < 0.8 variant 2 */
2261 wi_write_val(sc, WI_RID_PROMISC, 1);
2263 wi_write_val(sc, WI_RID_CNFAUTHMODE,
2264 sc->sc_cnfauthmode);
2265 val = PRIVACY_INVOKED | EXCLUDE_UNENCRYPTED;
2267 * Encryption firmware has a bug for HostAP mode.
2269 if (sc->sc_firmware_type == WI_INTERSIL &&
2270 ic->ic_opmode == IEEE80211_M_HOSTAP)
2271 val |= HOST_ENCRYPT;
2273 wi_write_val(sc, WI_RID_CNFAUTHMODE,
2274 IEEE80211_AUTH_OPEN);
2275 val = HOST_ENCRYPT | HOST_DECRYPT;
2277 error = wi_write_val(sc, WI_RID_P2_ENCRYPTION, val);
2280 error = wi_write_val(sc, WI_RID_P2_TX_CRYPT_KEY,
2285 * It seems that the firmware accept 104bit key only if
2286 * all the keys have 104bit length. We get the length of
2287 * the transmit key and use it for all other keys.
2288 * Perhaps we should use software WEP for such situation.
2290 keylen = ic->ic_nw_keys[ic->ic_wep_txkey].wk_len;
2291 if (keylen > IEEE80211_WEP_KEYLEN)
2292 keylen = 13; /* 104bit keys */
2294 keylen = IEEE80211_WEP_KEYLEN;
2295 for (i = 0; i < IEEE80211_WEP_NKID; i++) {
2296 error = wi_write_rid(sc, WI_RID_P2_CRYPT_KEY0 + i,
2297 ic->ic_nw_keys[i].wk_key, keylen);
2307 wi_cmd(struct wi_softc *sc, int cmd, int val0, int val1, int val2)
2310 static volatile int count = 0;
2316 panic("Hey partner, hold on there!");
2319 /* wait for the busy bit to clear */
2320 for (i = sc->wi_cmd_count; i > 0; i--) { /* 500ms */
2321 if (!(CSR_READ_2(sc, WI_COMMAND) & WI_CMD_BUSY))
2323 DELAY(1*1000); /* 1ms */
2326 if_printf(&sc->sc_ic.ic_if, "wi_cmd: busy bit won't clear.\n" );
2332 CSR_WRITE_2(sc, WI_PARAM0, val0);
2333 CSR_WRITE_2(sc, WI_PARAM1, val1);
2334 CSR_WRITE_2(sc, WI_PARAM2, val2);
2335 CSR_WRITE_2(sc, WI_COMMAND, cmd);
2337 if (cmd == WI_CMD_INI) {
2338 /* XXX: should sleep here. */
2339 DELAY(100*1000); /* 100ms delay for init */
2341 for (i = 0; i < WI_TIMEOUT; i++) {
2343 * Wait for 'command complete' bit to be
2344 * set in the event status register.
2346 s = CSR_READ_2(sc, WI_EVENT_STAT);
2347 if (s & WI_EV_CMD) {
2348 /* Ack the event and read result code. */
2349 s = CSR_READ_2(sc, WI_STATUS);
2350 CSR_WRITE_2(sc, WI_EVENT_ACK, WI_EV_CMD);
2351 if (s & WI_STAT_CMD_RESULT) {
2361 if (i == WI_TIMEOUT) {
2362 if_printf(&sc->sc_ic.ic_if,
2363 "timeout in wi_cmd 0x%04x; event status 0x%04x\n", cmd, s);
2372 wi_seek_bap(struct wi_softc *sc, int id, int off)
2376 CSR_WRITE_2(sc, WI_SEL0, id);
2377 CSR_WRITE_2(sc, WI_OFF0, off);
2379 for (i = 0; ; i++) {
2380 status = CSR_READ_2(sc, WI_OFF0);
2381 if ((status & WI_OFF_BUSY) == 0)
2383 if (i == WI_TIMEOUT) {
2384 if_printf(&sc->sc_ic.ic_if,
2385 "timeout in wi_seek to %x/%x\n", id, off);
2386 sc->sc_bap_off = WI_OFF_ERR; /* invalidate */
2387 if (status == 0xffff)
2393 if (status & WI_OFF_ERR) {
2394 if_printf(&sc->sc_ic.ic_if, "failed in wi_seek to %x/%x\n",
2396 sc->sc_bap_off = WI_OFF_ERR; /* invalidate */
2400 sc->sc_bap_off = off;
2405 wi_read_bap(struct wi_softc *sc, int id, int off, void *buf, int buflen)
2412 if (id != sc->sc_bap_id || off != sc->sc_bap_off) {
2413 if ((error = wi_seek_bap(sc, id, off)) != 0)
2416 cnt = (buflen + 1) / 2;
2417 ptr = (u_int16_t *)buf;
2418 for (i = 0; i < cnt; i++)
2419 *ptr++ = CSR_READ_2(sc, WI_DATA0);
2420 sc->sc_bap_off += cnt * 2;
2425 wi_write_bap(struct wi_softc *sc, int id, int off, void *buf, int buflen)
2433 #ifdef WI_HERMES_AUTOINC_WAR
2436 if (id != sc->sc_bap_id || off != sc->sc_bap_off) {
2437 if ((error = wi_seek_bap(sc, id, off)) != 0)
2440 cnt = (buflen + 1) / 2;
2441 ptr = (u_int16_t *)buf;
2442 for (i = 0; i < cnt; i++)
2443 CSR_WRITE_2(sc, WI_DATA0, ptr[i]);
2444 sc->sc_bap_off += cnt * 2;
2446 #ifdef WI_HERMES_AUTOINC_WAR
2448 * According to the comments in the HCF Light code, there is a bug
2449 * in the Hermes (or possibly in certain Hermes firmware revisions)
2450 * where the chip's internal autoincrement counter gets thrown off
2451 * during data writes: the autoincrement is missed, causing one
2452 * data word to be overwritten and subsequent words to be written to
2453 * the wrong memory locations. The end result is that we could end
2454 * up transmitting bogus frames without realizing it. The workaround
2455 * for this is to write a couple of extra guard words after the end
2456 * of the transfer, then attempt to read then back. If we fail to
2457 * locate the guard words where we expect them, we preform the
2458 * transfer over again.
2460 if ((sc->sc_flags & WI_FLAGS_BUG_AUTOINC) && (id & 0xf000) == 0) {
2461 CSR_WRITE_2(sc, WI_DATA0, 0x1234);
2462 CSR_WRITE_2(sc, WI_DATA0, 0x5678);
2463 wi_seek_bap(sc, id, sc->sc_bap_off);
2464 sc->sc_bap_off = WI_OFF_ERR; /* invalidate */
2465 if (CSR_READ_2(sc, WI_DATA0) != 0x1234 ||
2466 CSR_READ_2(sc, WI_DATA0) != 0x5678) {
2467 if_printf(&sc->sc_ic.ic_if,
2468 "detect auto increment bug, try again\n");
2477 wi_mwrite_bap(struct wi_softc *sc, int id, int off, struct mbuf *m0, int totlen)
2482 for (m = m0; m != NULL && totlen > 0; m = m->m_next) {
2486 len = min(m->m_len, totlen);
2488 if (((u_long)m->m_data) % 2 != 0 || len % 2 != 0) {
2489 m_copydata(m, 0, totlen, (caddr_t)&sc->sc_txbuf);
2490 return wi_write_bap(sc, id, off, (caddr_t)&sc->sc_txbuf,
2494 if ((error = wi_write_bap(sc, id, off, m->m_data, len)) != 0)
2504 wi_alloc_fid(struct wi_softc *sc, int len, int *idp)
2508 if (wi_cmd(sc, WI_CMD_ALLOC_MEM, len, 0, 0)) {
2509 if_printf(&sc->sc_ic.ic_if,
2510 "failed to allocate %d bytes on NIC\n", len);
2514 for (i = 0; i < WI_TIMEOUT; i++) {
2515 if (CSR_READ_2(sc, WI_EVENT_STAT) & WI_EV_ALLOC)
2517 if (i == WI_TIMEOUT) {
2518 if_printf(&sc->sc_ic.ic_if, "timeout in alloc\n");
2523 *idp = CSR_READ_2(sc, WI_ALLOC_FID);
2524 CSR_WRITE_2(sc, WI_EVENT_ACK, WI_EV_ALLOC);
2529 wi_read_rid(struct wi_softc *sc, int rid, void *buf, int *buflenp)
2534 /* Tell the NIC to enter record read mode. */
2535 error = wi_cmd(sc, WI_CMD_ACCESS | WI_ACCESS_READ, rid, 0, 0);
2539 error = wi_read_bap(sc, rid, 0, ltbuf, sizeof(ltbuf));
2543 if (le16toh(ltbuf[1]) != rid) {
2544 if_printf(&sc->sc_ic.ic_if,
2545 "record read mismatch, rid=%x, got=%x\n",
2546 rid, le16toh(ltbuf[1]));
2549 len = (le16toh(ltbuf[0]) - 1) * 2; /* already got rid */
2550 if (*buflenp < len) {
2551 if_printf(&sc->sc_ic.ic_if, "record buffer is too small, "
2552 "rid=%x, size=%d, len=%d\n", rid, *buflenp, len);
2556 return wi_read_bap(sc, rid, sizeof(ltbuf), buf, len);
2560 wi_write_rid(struct wi_softc *sc, int rid, void *buf, int buflen)
2565 ltbuf[0] = htole16((buflen + 1) / 2 + 1); /* includes rid */
2566 ltbuf[1] = htole16(rid);
2568 error = wi_write_bap(sc, rid, 0, ltbuf, sizeof(ltbuf));
2571 error = wi_write_bap(sc, rid, sizeof(ltbuf), buf, buflen);
2575 return wi_cmd(sc, WI_CMD_ACCESS | WI_ACCESS_WRITE, rid, 0, 0);
2579 wi_newstate(struct ieee80211com *ic, enum ieee80211_state nstate, int arg)
2581 struct ifnet *ifp = &ic->ic_if;
2582 struct wi_softc *sc = ifp->if_softc;
2583 struct ieee80211_node *ni = ic->ic_bss;
2586 struct wi_ssid ssid;
2587 u_int8_t old_bssid[IEEE80211_ADDR_LEN];
2589 DPRINTF((ifp, "%s: %s -> %s\n", __func__,
2590 ieee80211_state_name[ic->ic_state],
2591 ieee80211_state_name[nstate]));
2594 case IEEE80211_S_INIT:
2595 ic->ic_flags &= ~IEEE80211_F_SIBSS;
2596 sc->sc_flags &= ~WI_FLAGS_OUTRANGE;
2597 return (*sc->sc_newstate)(ic, nstate, arg);
2599 case IEEE80211_S_RUN:
2600 sc->sc_flags &= ~WI_FLAGS_OUTRANGE;
2601 buflen = IEEE80211_ADDR_LEN;
2602 wi_read_rid(sc, WI_RID_CURRENT_BSSID, ni->ni_bssid, &buflen);
2603 IEEE80211_ADDR_COPY(ni->ni_macaddr, ni->ni_bssid);
2604 buflen = sizeof(val);
2605 wi_read_rid(sc, WI_RID_CURRENT_CHAN, &val, &buflen);
2606 /* XXX validate channel */
2607 ni->ni_chan = &ic->ic_channels[le16toh(val)];
2608 sc->sc_tx_th.wt_chan_freq = sc->sc_rx_th.wr_chan_freq =
2609 htole16(ni->ni_chan->ic_freq);
2610 sc->sc_tx_th.wt_chan_flags = sc->sc_rx_th.wr_chan_flags =
2611 htole16(ni->ni_chan->ic_flags);
2613 if (IEEE80211_ADDR_EQ(old_bssid, ni->ni_bssid))
2614 sc->sc_false_syns++;
2616 sc->sc_false_syns = 0;
2618 if (ic->ic_opmode == IEEE80211_M_HOSTAP) {
2619 ni->ni_esslen = ic->ic_des_esslen;
2620 memcpy(ni->ni_essid, ic->ic_des_essid, ni->ni_esslen);
2621 ni->ni_rates = ic->ic_sup_rates[IEEE80211_MODE_11B];
2622 ni->ni_intval = ic->ic_lintval;
2623 ni->ni_capinfo = IEEE80211_CAPINFO_ESS;
2624 if (ic->ic_flags & IEEE80211_F_WEPON)
2625 ni->ni_capinfo |= IEEE80211_CAPINFO_PRIVACY;
2627 /* XXX check return value */
2628 buflen = sizeof(ssid);
2629 wi_read_rid(sc, WI_RID_CURRENT_SSID, &ssid, &buflen);
2630 ni->ni_esslen = le16toh(ssid.wi_len);
2631 if (ni->ni_esslen > IEEE80211_NWID_LEN)
2632 ni->ni_esslen = IEEE80211_NWID_LEN; /*XXX*/
2633 memcpy(ni->ni_essid, ssid.wi_ssid, ni->ni_esslen);
2637 case IEEE80211_S_SCAN:
2638 case IEEE80211_S_AUTH:
2639 case IEEE80211_S_ASSOC:
2643 ic->ic_state = nstate; /* NB: skip normal ieee80211 handling */
2648 wi_scan_ap(struct wi_softc *sc, u_int16_t chanmask, u_int16_t txrate)
2653 if (!sc->sc_enabled)
2655 switch (sc->sc_firmware_type) {
2657 (void)wi_cmd(sc, WI_CMD_INQUIRE, WI_INFO_SCAN_RESULTS, 0, 0);
2660 val[0] = chanmask; /* channel */
2661 val[1] = txrate; /* tx rate */
2662 error = wi_write_rid(sc, WI_RID_SCAN_REQ, val, sizeof(val));
2666 * XXX only supported on 3.x ?
2668 val[0] = BSCAN_BCAST | BSCAN_ONETIME;
2669 error = wi_write_rid(sc, WI_RID_BCAST_SCAN_REQ,
2670 val, sizeof(val[0]));
2674 sc->sc_scan_timer = WI_SCAN_WAIT;
2675 sc->sc_ic.ic_if.if_timer = 1;
2676 DPRINTF((&sc->sc_ic.ic_if, "wi_scan_ap: start scanning, "
2677 "chamask 0x%x txrate 0x%x\n", chanmask, txrate));
2683 wi_scan_result(struct wi_softc *sc, int fid, int cnt)
2685 #define N(a) (sizeof (a) / sizeof (a[0]))
2686 int i, naps, off, szbuf;
2687 struct wi_scan_header ws_hdr; /* Prism2 header */
2688 struct wi_scan_data_p2 ws_dat; /* Prism2 scantable*/
2689 struct wi_apinfo *ap;
2691 off = sizeof(u_int16_t) * 2;
2692 memset(&ws_hdr, 0, sizeof(ws_hdr));
2693 switch (sc->sc_firmware_type) {
2695 wi_read_bap(sc, fid, off, &ws_hdr, sizeof(ws_hdr));
2696 off += sizeof(ws_hdr);
2697 szbuf = sizeof(struct wi_scan_data_p2);
2700 szbuf = sizeof(struct wi_scan_data_p2) + 6;
2703 szbuf = sizeof(struct wi_scan_data);
2706 if_printf(&sc->sc_ic.ic_if,
2707 "wi_scan_result: unknown firmware type %u\n",
2708 sc->sc_firmware_type);
2712 naps = (cnt * 2 + 2 - off) / szbuf;
2713 if (naps > N(sc->sc_aps))
2714 naps = N(sc->sc_aps);
2718 memset(&ws_dat, 0, sizeof(ws_dat));
2719 for (i = 0; i < naps; i++, ap++) {
2720 wi_read_bap(sc, fid, off, &ws_dat,
2721 (sizeof(ws_dat) < szbuf ? sizeof(ws_dat) : szbuf));
2722 DPRINTF2((&sc->sc_ic.ic_if,
2723 "wi_scan_result: #%d: off %d bssid %6D\n",
2724 i, off, ws_dat.wi_bssid, ":"));
2726 ap->scanreason = le16toh(ws_hdr.wi_reason);
2727 memcpy(ap->bssid, ws_dat.wi_bssid, sizeof(ap->bssid));
2728 ap->channel = le16toh(ws_dat.wi_chid);
2729 ap->signal = le16toh(ws_dat.wi_signal);
2730 ap->noise = le16toh(ws_dat.wi_noise);
2731 ap->quality = ap->signal - ap->noise;
2732 ap->capinfo = le16toh(ws_dat.wi_capinfo);
2733 ap->interval = le16toh(ws_dat.wi_interval);
2734 ap->rate = le16toh(ws_dat.wi_rate);
2735 ap->namelen = le16toh(ws_dat.wi_namelen);
2736 if (ap->namelen > sizeof(ap->name))
2737 ap->namelen = sizeof(ap->name);
2738 memcpy(ap->name, ws_dat.wi_name, ap->namelen);
2742 sc->sc_scan_timer = 0;
2743 DPRINTF((&sc->sc_ic.ic_if, "wi_scan_result: scan complete: ap %d\n",
2749 wi_dump_pkt(struct wi_frame *wh, struct ieee80211_node *ni, int rssi)
2751 ieee80211_dump_pkt((u_int8_t *) &wh->wi_whdr, sizeof(wh->wi_whdr),
2752 ni ? ni->ni_rates.rs_rates[ni->ni_txrate] & IEEE80211_RATE_VAL : -1, rssi);
2753 printf(" status 0x%x rx_tstamp1 %u rx_tstamp0 0x%u rx_silence %u\n",
2754 le16toh(wh->wi_status), le16toh(wh->wi_rx_tstamp1),
2755 le16toh(wh->wi_rx_tstamp0), wh->wi_rx_silence);
2756 printf(" rx_signal %u rx_rate %u rx_flow %u\n",
2757 wh->wi_rx_signal, wh->wi_rx_rate, wh->wi_rx_flow);
2758 printf(" tx_rtry %u tx_rate %u tx_ctl 0x%x dat_len %u\n",
2759 wh->wi_tx_rtry, wh->wi_tx_rate,
2760 le16toh(wh->wi_tx_ctl), le16toh(wh->wi_dat_len));
2761 printf(" ehdr dst %6D src %6D type 0x%x\n",
2762 wh->wi_ehdr.ether_dhost, ":", wh->wi_ehdr.ether_shost, ":",
2763 wh->wi_ehdr.ether_type);
2767 wi_alloc(device_t dev, int rid)
2769 struct wi_softc *sc = device_get_softc(dev);
2771 if (sc->wi_bus_type != WI_BUS_PCI_NATIVE) {
2772 sc->iobase_rid = rid;
2773 sc->iobase = bus_alloc_resource(dev, SYS_RES_IOPORT,
2774 &sc->iobase_rid, 0, ~0, (1 << 6),
2775 rman_make_alignment_flags(1 << 6) | RF_ACTIVE);
2777 device_printf(dev, "No I/O space?!\n");
2781 sc->wi_io_addr = rman_get_start(sc->iobase);
2782 sc->wi_btag = rman_get_bustag(sc->iobase);
2783 sc->wi_bhandle = rman_get_bushandle(sc->iobase);
2786 sc->mem = bus_alloc_resource_any(dev, SYS_RES_MEMORY,
2787 &sc->mem_rid, RF_ACTIVE);
2790 device_printf(dev, "No Mem space on prism2.5?\n");
2794 sc->wi_btag = rman_get_bustag(sc->mem);
2795 sc->wi_bhandle = rman_get_bushandle(sc->mem);
2800 sc->irq = bus_alloc_resource_any(dev, SYS_RES_IRQ, &sc->irq_rid,
2802 ((sc->wi_bus_type == WI_BUS_PCCARD) ? 0 : RF_SHAREABLE));
2806 device_printf(dev, "No irq?!\n");
2814 wi_free(device_t dev)
2816 struct wi_softc *sc = device_get_softc(dev);
2818 if (sc->iobase != NULL) {
2819 bus_release_resource(dev, SYS_RES_IOPORT, sc->iobase_rid, sc->iobase);
2822 if (sc->irq != NULL) {
2823 bus_release_resource(dev, SYS_RES_IRQ, sc->irq_rid, sc->irq);
2826 if (sc->mem != NULL) {
2827 bus_release_resource(dev, SYS_RES_MEMORY, sc->mem_rid, sc->mem);
2833 wi_get_debug(struct wi_softc *sc, struct wi_req *wreq)
2839 switch (wreq->wi_type) {
2840 case WI_DEBUG_SLEEP:
2842 wreq->wi_val[0] = sc->wi_debug.wi_sleep;
2844 case WI_DEBUG_DELAYSUPP:
2846 wreq->wi_val[0] = sc->wi_debug.wi_delaysupp;
2848 case WI_DEBUG_TXSUPP:
2850 wreq->wi_val[0] = sc->wi_debug.wi_txsupp;
2852 case WI_DEBUG_MONITOR:
2854 wreq->wi_val[0] = sc->wi_debug.wi_monitor;
2856 case WI_DEBUG_LEDTEST:
2858 wreq->wi_val[0] = sc->wi_debug.wi_ledtest;
2859 wreq->wi_val[1] = sc->wi_debug.wi_ledtest_param0;
2860 wreq->wi_val[2] = sc->wi_debug.wi_ledtest_param1;
2862 case WI_DEBUG_CONTTX:
2864 wreq->wi_val[0] = sc->wi_debug.wi_conttx;
2865 wreq->wi_val[1] = sc->wi_debug.wi_conttx_param0;
2867 case WI_DEBUG_CONTRX:
2869 wreq->wi_val[0] = sc->wi_debug.wi_contrx;
2871 case WI_DEBUG_SIGSTATE:
2873 wreq->wi_val[0] = sc->wi_debug.wi_sigstate;
2874 wreq->wi_val[1] = sc->wi_debug.wi_sigstate_param0;
2876 case WI_DEBUG_CONFBITS:
2878 wreq->wi_val[0] = sc->wi_debug.wi_confbits;
2879 wreq->wi_val[1] = sc->wi_debug.wi_confbits_param0;
2890 wi_set_debug(struct wi_softc *sc, struct wi_req *wreq)
2893 u_int16_t cmd, param0 = 0, param1 = 0;
2895 switch (wreq->wi_type) {
2896 case WI_DEBUG_RESET:
2898 case WI_DEBUG_CALENABLE:
2900 case WI_DEBUG_SLEEP:
2901 sc->wi_debug.wi_sleep = 1;
2904 sc->wi_debug.wi_sleep = 0;
2907 param0 = wreq->wi_val[0];
2909 case WI_DEBUG_DELAYSUPP:
2910 sc->wi_debug.wi_delaysupp = 1;
2912 case WI_DEBUG_TXSUPP:
2913 sc->wi_debug.wi_txsupp = 1;
2915 case WI_DEBUG_MONITOR:
2916 sc->wi_debug.wi_monitor = 1;
2918 case WI_DEBUG_LEDTEST:
2919 param0 = wreq->wi_val[0];
2920 param1 = wreq->wi_val[1];
2921 sc->wi_debug.wi_ledtest = 1;
2922 sc->wi_debug.wi_ledtest_param0 = param0;
2923 sc->wi_debug.wi_ledtest_param1 = param1;
2925 case WI_DEBUG_CONTTX:
2926 param0 = wreq->wi_val[0];
2927 sc->wi_debug.wi_conttx = 1;
2928 sc->wi_debug.wi_conttx_param0 = param0;
2930 case WI_DEBUG_STOPTEST:
2931 sc->wi_debug.wi_delaysupp = 0;
2932 sc->wi_debug.wi_txsupp = 0;
2933 sc->wi_debug.wi_monitor = 0;
2934 sc->wi_debug.wi_ledtest = 0;
2935 sc->wi_debug.wi_ledtest_param0 = 0;
2936 sc->wi_debug.wi_ledtest_param1 = 0;
2937 sc->wi_debug.wi_conttx = 0;
2938 sc->wi_debug.wi_conttx_param0 = 0;
2939 sc->wi_debug.wi_contrx = 0;
2940 sc->wi_debug.wi_sigstate = 0;
2941 sc->wi_debug.wi_sigstate_param0 = 0;
2943 case WI_DEBUG_CONTRX:
2944 sc->wi_debug.wi_contrx = 1;
2946 case WI_DEBUG_SIGSTATE:
2947 param0 = wreq->wi_val[0];
2948 sc->wi_debug.wi_sigstate = 1;
2949 sc->wi_debug.wi_sigstate_param0 = param0;
2951 case WI_DEBUG_CONFBITS:
2952 param0 = wreq->wi_val[0];
2953 param1 = wreq->wi_val[1];
2954 sc->wi_debug.wi_confbits = param0;
2955 sc->wi_debug.wi_confbits_param0 = param1;
2965 cmd = WI_CMD_DEBUG | (wreq->wi_type << 8);
2966 error = wi_cmd(sc, cmd, param0, param1, 0);
2972 * Special routines to download firmware for Symbol CF card.
2973 * XXX: This should be modified generic into any PRISM-2 based card.
2976 #define WI_SBCF_PDIADDR 0x3100
2978 /* unaligned load little endian */
2979 #define GETLE32(p) ((p)[0] | ((p)[1]<<8) | ((p)[2]<<16) | ((p)[3]<<24))
2980 #define GETLE16(p) ((p)[0] | ((p)[1]<<8))
2983 wi_symbol_load_firm(struct wi_softc *sc, const void *primsym, int primlen,
2984 const void *secsym, int seclen)
2989 /* load primary code and run it */
2990 wi_symbol_set_hcr(sc, WI_HCR_EEHOLD);
2991 if (wi_symbol_write_firm(sc, primsym, primlen, NULL, 0))
2993 wi_symbol_set_hcr(sc, WI_HCR_RUN);
2994 for (i = 0; ; i++) {
2997 tsleep(sc, 0, "wiinit", 1);
2998 if (CSR_READ_2(sc, WI_CNTL) == WI_CNTL_AUX_ENA_STAT)
3000 /* write the magic key value to unlock aux port */
3001 CSR_WRITE_2(sc, WI_PARAM0, WI_AUX_KEY0);
3002 CSR_WRITE_2(sc, WI_PARAM1, WI_AUX_KEY1);
3003 CSR_WRITE_2(sc, WI_PARAM2, WI_AUX_KEY2);
3004 CSR_WRITE_2(sc, WI_CNTL, WI_CNTL_AUX_ENA_CNTL);
3007 /* issue read EEPROM command: XXX copied from wi_cmd() */
3008 CSR_WRITE_2(sc, WI_PARAM0, 0);
3009 CSR_WRITE_2(sc, WI_PARAM1, 0);
3010 CSR_WRITE_2(sc, WI_PARAM2, 0);
3011 CSR_WRITE_2(sc, WI_COMMAND, WI_CMD_READEE);
3012 for (i = 0; i < WI_TIMEOUT; i++) {
3013 if (CSR_READ_2(sc, WI_EVENT_STAT) & WI_EV_CMD)
3017 CSR_WRITE_2(sc, WI_EVENT_ACK, WI_EV_CMD);
3019 CSR_WRITE_2(sc, WI_AUX_PAGE, WI_SBCF_PDIADDR / WI_AUX_PGSZ);
3020 CSR_WRITE_2(sc, WI_AUX_OFFSET, WI_SBCF_PDIADDR % WI_AUX_PGSZ);
3021 CSR_READ_MULTI_STREAM_2(sc, WI_AUX_DATA,
3022 (uint16_t *)ebuf, sizeof(ebuf) / 2);
3023 if (GETLE16(ebuf) > sizeof(ebuf))
3025 if (wi_symbol_write_firm(sc, secsym, seclen, ebuf + 4, GETLE16(ebuf)))
3031 wi_symbol_write_firm(struct wi_softc *sc, const void *buf, int buflen,
3032 const void *ebuf, int ebuflen)
3034 const uint8_t *p, *ep, *q, *eq;
3036 uint32_t addr, id, eid;
3037 int i, len, elen, nblk, pdrlen;
3040 * Parse the header of the firmware image.
3044 while (p < ep && *p++ != ' '); /* FILE: */
3045 while (p < ep && *p++ != ' '); /* filename */
3046 while (p < ep && *p++ != ' '); /* type of the firmware */
3047 nblk = strtoul(p, &tp, 10);
3049 pdrlen = strtoul(p + 1, &tp, 10);
3051 while (p < ep && *p++ != 0x1a); /* skip rest of header */
3054 * Block records: address[4], length[2], data[length];
3056 for (i = 0; i < nblk; i++) {
3057 addr = GETLE32(p); p += 4;
3058 len = GETLE16(p); p += 2;
3059 CSR_WRITE_2(sc, WI_AUX_PAGE, addr / WI_AUX_PGSZ);
3060 CSR_WRITE_2(sc, WI_AUX_OFFSET, addr % WI_AUX_PGSZ);
3061 CSR_WRITE_MULTI_STREAM_2(sc, WI_AUX_DATA,
3062 (const uint16_t *)p, len / 2);
3067 * PDR: id[4], address[4], length[4];
3069 for (i = 0; i < pdrlen; ) {
3070 id = GETLE32(p); p += 4; i += 4;
3071 addr = GETLE32(p); p += 4; i += 4;
3072 len = GETLE32(p); p += 4; i += 4;
3073 /* replace PDR entry with the values from EEPROM, if any */
3074 for (q = ebuf, eq = q + ebuflen; q < eq; q += elen * 2) {
3075 elen = GETLE16(q); q += 2;
3076 eid = GETLE16(q); q += 2;
3077 elen--; /* elen includes eid */
3082 CSR_WRITE_2(sc, WI_AUX_PAGE, addr / WI_AUX_PGSZ);
3083 CSR_WRITE_2(sc, WI_AUX_OFFSET, addr % WI_AUX_PGSZ);
3084 CSR_WRITE_MULTI_STREAM_2(sc, WI_AUX_DATA,
3085 (const uint16_t *)q, len / 2);
3093 wi_symbol_set_hcr(struct wi_softc *sc, int mode)
3097 CSR_WRITE_2(sc, WI_COR, WI_COR_RESET);
3098 tsleep(sc, 0, "wiinit", 1);
3099 hcr = CSR_READ_2(sc, WI_HCR);
3100 hcr = (hcr & WI_HCR_4WIRE) | (mode & ~WI_HCR_4WIRE);
3101 CSR_WRITE_2(sc, WI_HCR, hcr);
3102 tsleep(sc, 0, "wiinit", 1);
3103 CSR_WRITE_2(sc, WI_COR, WI_COR_IOMODE);
3104 tsleep(sc, 0, "wiinit", 1);