Merge from vendor branch LIBARCHIVE:

[dragonfly.git] / sys / dev / netif / bfe / if_bfereg.h

/* Copyright (c) 2003 Stuart Walsh */
/* $FreeBSD: src/sys/dev/bfe/if_bfereg.h,v 1.1.4.3 2004/02/13 21:36:34 julian Exp $ */
/* $DragonFly: src/sys/dev/netif/bfe/if_bfereg.h,v 1.4 2005/05/23 18:05:58 joerg Exp $ */

#ifndef _BFE_H
#define _BFE_H

/* PCI registers */
#define BFE_PCI_MEMLO           0x10
#define BFE_PCI_MEMHIGH         0x14
#define BFE_PCI_INTLINE         0x3C

/* Register layout. */
#define BFE_DEVCTRL             0x00000000  /* Device Control */
#define BFE_PFE                 0x00000080  /* Pattern Filtering Enable */
#define BFE_IPP                 0x00000400  /* Internal EPHY Present */
#define BFE_EPR                 0x00008000  /* EPHY Reset */
#define BFE_PME                 0x00001000  /* PHY Mode Enable */
#define BFE_PMCE                0x00002000  /* PHY Mode Clocks Enable */
#define BFE_PADDR               0x0007c000  /* PHY Address */
#define BFE_PADDR_SHIFT         18

#define BFE_BIST_STAT           0x0000000C  /* Built-In Self-Test Status */
#define BFE_WKUP_LEN            0x00000010  /* Wakeup Length */

#define BFE_ISTAT               0x00000020  /* Interrupt Status */
#define BFE_ISTAT_PME           0x00000040 /* Power Management Event */
#define BFE_ISTAT_TO            0x00000080 /* General Purpose Timeout */
#define BFE_ISTAT_DSCE          0x00000400 /* Descriptor Error */
#define BFE_ISTAT_DATAE         0x00000800 /* Data Error */
#define BFE_ISTAT_DPE           0x00001000 /* Descr. Protocol Error */
#define BFE_ISTAT_RDU           0x00002000 /* Receive Descr. Underflow */
#define BFE_ISTAT_RFO           0x00004000 /* Receive FIFO Overflow */
#define BFE_ISTAT_TFU           0x00008000 /* Transmit FIFO Underflow */
#define BFE_ISTAT_RX            0x00010000 /* RX Interrupt */
#define BFE_ISTAT_TX            0x01000000 /* TX Interrupt */
#define BFE_ISTAT_EMAC          0x04000000 /* EMAC Interrupt */
#define BFE_ISTAT_MII_WRITE     0x08000000 /* MII Write Interrupt */
#define BFE_ISTAT_MII_READ      0x10000000 /* MII Read Interrupt */
#define BFE_ISTAT_ERRORS        (BFE_ISTAT_DSCE | BFE_ISTAT_DATAE | \
                BFE_ISTAT_DPE | BFE_ISTAT_RDU | BFE_ISTAT_RFO | BFE_ISTAT_TFU)

#define BFE_IMASK               0x00000024 /* Interrupt Mask */
#define BFE_IMASK_DEF           (BFE_ISTAT_ERRORS | BFE_ISTAT_TO |      \
                                 BFE_ISTAT_RX | BFE_ISTAT_TX)

#define BFE_MAC_CTRL            0x000000A8 /* MAC Control */
#define BFE_CTRL_CRC32_ENAB     0x00000001 /* CRC32 Generation Enable */
#define BFE_CTRL_PDOWN          0x00000004 /* Onchip EPHY Powerdown */
#define BFE_CTRL_EDET           0x00000008 /* Onchip EPHY Energy Detected */
#define BFE_CTRL_LED            0x000000e0 /* Onchip EPHY LED Control */
#define BFE_CTRL_LED_SHIFT      5

#define BFE_RCV_LAZY            0x00000100 /* Lazy Interrupt Control */
#define BFE_LAZY_TO_MASK        0x00ffffff /* Timeout */
#define BFE_LAZY_FC_MASK        0xff000000 /* Frame Count */
#define BFE_LAZY_FC_SHIFT       24

#define BFE_DMATX_CTRL          0x00000200 /* DMA TX Control */
#define BFE_TX_CTRL_ENABLE      0x00000001 /* Enable */
#define BFE_TX_CTRL_SUSPEND     0x00000002 /* Suepend Request */
#define BFE_TX_CTRL_LPBACK      0x00000004 /* Loopback Enable */
#define BFE_TX_CTRL_FAIRPRI     0x00000008 /* Fair Priority */
#define BFE_TX_CTRL_FLUSH       0x00000010 /* Flush Request */

#define BFE_DMATX_ADDR          0x00000204 /* DMA TX Descriptor Ring Address */
#define BFE_DMATX_PTR           0x00000208 /* DMA TX Last Posted Descriptor */
#define BFE_DMATX_STAT          0x0000020C /* DMA TX Current Active Desc. + Status */
#define BFE_STAT_CDMASK         0x00000fff /* Current Descriptor Mask */
#define BFE_STAT_SMASK          0x0000f000 /* State Mask */
#define BFE_STAT_DISABLE        0x00000000 /* State Disabled */
#define BFE_STAT_SACTIVE        0x00001000 /* State Active */
#define BFE_STAT_SIDLE          0x00002000 /* State Idle Wait */
#define BFE_STAT_STOPPED        0x00003000 /* State Stopped */
#define BFE_STAT_SSUSP          0x00004000 /* State Suspend Pending */
#define BFE_STAT_EMASK          0x000f0000 /* Error Mask */
#define BFE_STAT_ENONE          0x00000000 /* Error None */
#define BFE_STAT_EDPE           0x00010000 /* Error Desc. Protocol Error */
#define BFE_STAT_EDFU           0x00020000 /* Error Data FIFO Underrun */
#define BFE_STAT_EBEBR          0x00030000 /* Error Bus Error on Buffer Read */
#define BFE_STAT_EBEDA          0x00040000 /* Error Bus Error on Desc. Access */
#define BFE_STAT_FLUSHED        0x00100000 /* Flushed */

#define BFE_DMARX_CTRL          0x00000210 /* DMA RX Control */
#define BFE_RX_CTRL_ENABLE      0x00000001 /* Enable */
#define BFE_RX_CTRL_ROMASK      0x000000fe /* Receive Offset Mask */
#define BFE_RX_CTRL_ROSHIFT     1          /* Receive Offset Shift */

#define BFE_DMARX_ADDR          0x00000214 /* DMA RX Descriptor Ring Address */
#define BFE_DMARX_PTR           0x00000218 /* DMA RX Last Posted Descriptor */
#define BFE_DMARX_STAT          0x0000021C /* DMA RX Current Active Desc. + Status */

#define BFE_RXCONF              0x00000400 /* EMAC RX Config */
#define BFE_RXCONF_DBCAST       0x00000001 /* Disable Broadcast */
#define BFE_RXCONF_ALLMULTI     0x00000002 /* Accept All Multicast */
#define BFE_RXCONF_NORXTX       0x00000004 /* Receive Disable While Transmitting */
#define BFE_RXCONF_PROMISC      0x00000008 /* Promiscuous Enable */
#define BFE_RXCONF_LPBACK       0x00000010 /* Loopback Enable */
#define BFE_RXCONF_FLOW         0x00000020 /* Flow Control Enable */
#define BFE_RXCONF_ACCEPT       0x00000040 /* Accept Unicast Flow Control Frame */
#define BFE_RXCONF_RFILT        0x00000080 /* Reject Filter */

#define BFE_RXMAXLEN            0x00000404 /* EMAC RX Max Packet Length */
#define BFE_TXMAXLEN            0x00000408 /* EMAC TX Max Packet Length */

#define BFE_MDIO_CTRL           0x00000410 /* EMAC MDIO Control */
#define BFE_MDIO_MAXF_MASK      0x0000007f /* MDC Frequency */
#define BFE_MDIO_PREAMBLE       0x00000080 /* MII Preamble Enable */

#define BFE_MDIO_DATA           0x00000414 /* EMAC MDIO Data */
#define BFE_MDIO_DATA_DATA      0x0000ffff /* R/W Data */
#define BFE_MDIO_TA_MASK        0x00030000 /* Turnaround Value */
#define BFE_MDIO_TA_SHIFT       16
#define BFE_MDIO_TA_VALID       2

#define BFE_MDIO_RA_MASK        0x007c0000 /* Register Address */
#define BFE_MDIO_PMD_MASK       0x0f800000 /* Physical Media Device */
#define BFE_MDIO_OP_MASK        0x30000000 /* Opcode */
#define BFE_MDIO_SB_MASK        0xc0000000 /* Start Bits */
#define BFE_MDIO_SB_START       0x40000000 /* Start Of Frame */
#define BFE_MDIO_RA_SHIFT       18
#define BFE_MDIO_PMD_SHIFT      23
#define BFE_MDIO_OP_SHIFT       28
#define BFE_MDIO_OP_WRITE       1
#define BFE_MDIO_OP_READ        2
#define BFE_MDIO_SB_SHIFT       30

#define BFE_EMAC_IMASK          0x00000418 /* EMAC Interrupt Mask */
#define BFE_EMAC_ISTAT          0x0000041C /* EMAC Interrupt Status */
#define BFE_EMAC_INT_MII        0x00000001 /* MII MDIO Interrupt */
#define BFE_EMAC_INT_MIB        0x00000002 /* MIB Interrupt */
#define BFE_EMAC_INT_FLOW       0x00000003 /* Flow Control Interrupt */

#define BFE_CAM_DATA_LO         0x00000420 /* EMAC CAM Data Low */
#define BFE_CAM_DATA_HI         0x00000424 /* EMAC CAM Data High */
#define BFE_CAM_HI_VALID        0x00010000 /* Valid Bit */

#define BFE_CAM_CTRL            0x00000428 /* EMAC CAM Control */
#define BFE_CAM_ENABLE          0x00000001 /* CAM Enable */
#define BFE_CAM_MSEL            0x00000002 /* Mask Select */
#define BFE_CAM_READ            0x00000004 /* Read */
#define BFE_CAM_WRITE           0x00000008 /* Read */
#define BFE_CAM_INDEX_MASK      0x003f0000 /* Index Mask */
#define BFE_CAM_BUSY            0x80000000 /* CAM Busy */
#define BFE_CAM_INDEX_SHIFT     16

#define BFE_ENET_CTRL           0x0000042C /* EMAC ENET Control */
#define BFE_ENET_ENABLE         0x00000001 /* EMAC Enable */
#define BFE_ENET_DISABLE        0x00000002 /* EMAC Disable */
#define BFE_ENET_SRST           0x00000004 /* EMAC Soft Reset */
#define BFE_ENET_EPSEL          0x00000008 /* External PHY Select */

#define BFE_TX_CTRL             0x00000430 /* EMAC TX Control */
#define BFE_TX_DUPLEX           0x00000001 /* Full Duplex */
#define BFE_TX_FMODE            0x00000002 /* Flow Mode */
#define BFE_TX_SBENAB           0x00000004 /* Single Backoff Enable */
#define BFE_TX_SMALL_SLOT       0x00000008 /* Small Slottime */

#define BFE_TX_WMARK            0x00000434 /* EMAC TX Watermark */

#define BFE_MIB_CTRL            0x00000438 /* EMAC MIB Control */
#define BFE_MIB_CLR_ON_READ     0x00000001 /* Autoclear on Read */

/* Status registers */
#define BFE_TX_GOOD_O           0x00000500 /* MIB TX Good Octets */
#define BFE_TX_GOOD_P           0x00000504 /* MIB TX Good Packets */
#define BFE_TX_O                0x00000508 /* MIB TX Octets */
#define BFE_TX_P                0x0000050C /* MIB TX Packets */
#define BFE_TX_BCAST            0x00000510 /* MIB TX Broadcast Packets */
#define BFE_TX_MCAST            0x00000514 /* MIB TX Multicast Packets */
#define BFE_TX_64               0x00000518 /* MIB TX <= 64 byte Packets */
#define BFE_TX_65_127           0x0000051C /* MIB TX 65 to 127 byte Packets */
#define BFE_TX_128_255          0x00000520 /* MIB TX 128 to 255 byte Packets */
#define BFE_TX_256_511          0x00000524 /* MIB TX 256 to 511 byte Packets */
#define BFE_TX_512_1023         0x00000528 /* MIB TX 512 to 1023 byte Packets */
#define BFE_TX_1024_MAX         0x0000052C /* MIB TX 1024 to max byte Packets */
#define BFE_TX_JABBER           0x00000530 /* MIB TX Jabber Packets */
#define BFE_TX_OSIZE            0x00000534 /* MIB TX Oversize Packets */
#define BFE_TX_FRAG             0x00000538 /* MIB TX Fragment Packets */
#define BFE_TX_URUNS            0x0000053C /* MIB TX Underruns */
#define BFE_TX_TCOLS            0x00000540 /* MIB TX Total Collisions */
#define BFE_TX_SCOLS            0x00000544 /* MIB TX Single Collisions */
#define BFE_TX_MCOLS            0x00000548 /* MIB TX Multiple Collisions */
#define BFE_TX_ECOLS            0x0000054C /* MIB TX Excessive Collisions */
#define BFE_TX_LCOLS            0x00000550 /* MIB TX Late Collisions */
#define BFE_TX_DEFERED          0x00000554 /* MIB TX Defered Packets */
#define BFE_TX_CLOST            0x00000558 /* MIB TX Carrier Lost */
#define BFE_TX_PAUSE            0x0000055C /* MIB TX Pause Packets */
#define BFE_RX_GOOD_O           0x00000580 /* MIB RX Good Octets */
#define BFE_RX_GOOD_P           0x00000584 /* MIB RX Good Packets */
#define BFE_RX_O                0x00000588 /* MIB RX Octets */
#define BFE_RX_P                0x0000058C /* MIB RX Packets */
#define BFE_RX_BCAST            0x00000590 /* MIB RX Broadcast Packets */
#define BFE_RX_MCAST            0x00000594 /* MIB RX Multicast Packets */
#define BFE_RX_64               0x00000598 /* MIB RX <= 64 byte Packets */
#define BFE_RX_65_127           0x0000059C /* MIB RX 65 to 127 byte Packets */
#define BFE_RX_128_255          0x000005A0 /* MIB RX 128 to 255 byte Packets */
#define BFE_RX_256_511          0x000005A4 /* MIB RX 256 to 511 byte Packets */
#define BFE_RX_512_1023         0x000005A8 /* MIB RX 512 to 1023 byte Packets */
#define BFE_RX_1024_MAX         0x000005AC /* MIB RX 1024 to max byte Packets */
#define BFE_RX_JABBER           0x000005B0 /* MIB RX Jabber Packets */
#define BFE_RX_OSIZE            0x000005B4 /* MIB RX Oversize Packets */
#define BFE_RX_FRAG             0x000005B8 /* MIB RX Fragment Packets */
#define BFE_RX_MISS             0x000005BC /* MIB RX Missed Packets */
#define BFE_RX_CRCA             0x000005C0 /* MIB RX CRC Align Errors */
#define BFE_RX_USIZE            0x000005C4 /* MIB RX Undersize Packets */
#define BFE_RX_CRC              0x000005C8 /* MIB RX CRC Errors */
#define BFE_RX_ALIGN            0x000005CC /* MIB RX Align Errors */
#define BFE_RX_SYM              0x000005D0 /* MIB RX Symbol Errors */
#define BFE_RX_PAUSE            0x000005D4 /* MIB RX Pause Packets */
#define BFE_RX_NPAUSE           0x000005D8 /* MIB RX Non-Pause Packets */

#define BFE_SBIMSTATE           0x00000F90 /* BFE_SB Initiator Agent State */
#define BFE_PC                  0x0000000f /* Pipe Count */
#define BFE_AP_MASK             0x00000030 /* Arbitration Priority */
#define BFE_AP_BOTH             0x00000000 /* Use both timeslices and token */
#define BFE_AP_TS               0x00000010 /* Use timeslices only */
#define BFE_AP_TK               0x00000020 /* Use token only */
#define BFE_AP_RSV              0x00000030 /* Reserved */
#define BFE_IBE                 0x00020000 /* In Band Error */
#define BFE_TO                  0x00040000 /* Timeout */


/*
 * Seems the bcm440x has a fairly generic core, we only need be concerned with
 * a couple of these
 */
#define BFE_SBINTVEC            0x00000F94 /* BFE_SB Interrupt Mask */
#define BFE_INTVEC_PCI          0x00000001 /* Enable interrupts for PCI */
#define BFE_INTVEC_ENET0        0x00000002 /* Enable interrupts for enet 0 */
#define BFE_INTVEC_ILINE20      0x00000004 /* Enable interrupts for iline20 */
#define BFE_INTVEC_CODEC        0x00000008 /* Enable interrupts for v90 codec */
#define BFE_INTVEC_USB          0x00000010 /* Enable interrupts for usb */
#define BFE_INTVEC_EXTIF        0x00000020 /* Enable interrupts for external i/f */
#define BFE_INTVEC_ENET1        0x00000040 /* Enable interrupts for enet 1 */

#define BFE_SBTMSLOW            0x00000F98 /* BFE_SB Target State Low */
#define BFE_RESET               0x00000001 /* Reset */
#define BFE_REJECT              0x00000002 /* Reject */
#define BFE_CLOCK               0x00010000 /* Clock Enable */
#define BFE_FGC                 0x00020000 /* Force Gated Clocks On */
#define BFE_PE                  0x40000000 /* Power Management Enable */
#define BFE_BE                  0x80000000 /* BIST Enable */

#define BFE_SBTMSHIGH           0x00000F9C /* BFE_SB Target State High */
#define BFE_SERR                0x00000001 /* S-error */
#define BFE_INT                 0x00000002 /* Interrupt */
#define BFE_BUSY                0x00000004 /* Busy */
#define BFE_GCR                 0x20000000 /* Gated Clock Request */
#define BFE_BISTF               0x40000000 /* BIST Failed */
#define BFE_BISTD               0x80000000 /* BIST Done */

#define BFE_SBBWA0              0x00000FA0 /* BFE_SB Bandwidth Allocation Table 0 */
#define BFE_TAB0_MASK           0x0000ffff /* Lookup Table 0 */
#define BFE_TAB1_MASK           0xffff0000 /* Lookup Table 0 */
#define BFE_TAB0_SHIFT          0
#define BFE_TAB1_SHIFT          16

#define BFE_SBIMCFGLOW          0x00000FA8 /* BFE_SB Initiator Configuration Low */
#define BFE_STO_MASK            0x00000003 /* Service Timeout */
#define BFE_RTO_MASK            0x00000030 /* Request Timeout */
#define BFE_CID_MASK            0x00ff0000 /* Connection ID */
#define BFE_RTO_SHIFT           4
#define BFE_CID_SHIFT           16

#define BFE_SBIMCFGHIGH         0x00000FAC /* BFE_SB Initiator Configuration High */
#define BFE_IEM_MASK            0x0000000c /* Inband Error Mode */
#define BFE_TEM_MASK            0x00000030 /* Timeout Error Mode */
#define BFE_BEM_MASK            0x000000c0 /* Bus Error Mode */
#define BFE_TEM_SHIFT           4
#define BFE_BEM_SHIFT           6

#define BFE_SBTMCFGLOW          0x00000FB8 /* BFE_SB Target Configuration Low */
#define BFE_LOW_CD_MASK         0x000000ff /* Clock Divide Mask */
#define BFE_LOW_CO_MASK         0x0000f800 /* Clock Offset Mask */
#define BFE_LOW_IF_MASK         0x00fc0000 /* Interrupt Flags Mask */
#define BFE_LOW_IM_MASK         0x03000000 /* Interrupt Mode Mask */
#define BFE_LOW_CO_SHIFT        11
#define BFE_LOW_IF_SHIFT        18
#define BFE_LOW_IM_SHIFT        24

#define BFE_SBTMCFGHIGH         0x00000FBC /* BFE_SB Target Configuration High */
#define BFE_HIGH_BM_MASK        0x00000003 /* Busy Mode */
#define BFE_HIGH_RM_MASK        0x0000000C /* Retry Mode */
#define BFE_HIGH_SM_MASK        0x00000030 /* Stop Mode */
#define BFE_HIGH_EM_MASK        0x00000300 /* Error Mode */
#define BFE_HIGH_IM_MASK        0x00000c00 /* Interrupt Mode */
#define BFE_HIGH_RM_SHIFT       2
#define BFE_HIGH_SM_SHIFT       4
#define BFE_HIGH_EM_SHIFT       8
#define BFE_HIGH_IM_SHIFT       10

#define BFE_SBBCFG              0x00000FC0 /* BFE_SB Broadcast Configuration */
#define BFE_LAT_MASK            0x00000003 /* BFE_SB Latency */
#define BFE_MAX0_MASK           0x000f0000 /* MAX Counter 0 */
#define BFE_MAX1_MASK           0x00f00000 /* MAX Counter 1 */
#define BFE_MAX0_SHIFT          16
#define BFE_MAX1_SHIFT          20

#define BFE_SBBSTATE            0x00000FC8 /* BFE_SB Broadcast State */
#define BFE_SBBSTATE_SRD        0x00000001 /* ST Reg Disable */
#define BFE_SBBSTATE_HRD        0x00000002 /* Hold Reg Disable */

#define BFE_SBACTCNFG           0x00000FD8 /* BFE_SB Activate Configuration */
#define BFE_SBFLAGST            0x00000FE8 /* BFE_SB Current BFE_SBFLAGS */

#define BFE_SBIDLOW             0x00000FF8 /* BFE_SB Identification Low */
#define BFE_CS_MASK             0x00000003 /* Config Space Mask */
#define BFE_AR_MASK             0x00000038 /* Num Address Ranges Supported */
#define BFE_SYNCH               0x00000040 /* Sync */
#define BFE_INIT                0x00000080 /* Initiator */
#define BFE_MINLAT_MASK         0x00000f00 /* Minimum Backplane Latency */
#define BFE_MAXLAT_MASK         0x0000f000 /* Maximum Backplane Latency */
#define BFE_FIRST               0x00010000 /* This Initiator is First */
#define BFE_CW_MASK             0x000c0000 /* Cycle Counter Width */
#define BFE_TP_MASK             0x00f00000 /* Target Ports */
#define BFE_IP_MASK             0x0f000000 /* Initiator Ports */
#define BFE_AR_SHIFT            3
#define BFE_MINLAT_SHIFT        8
#define BFE_MAXLAT_SHIFT        12
#define BFE_CW_SHIFT            18
#define BFE_TP_SHIFT            20
#define BFE_IP_SHIFT            24

#define BFE_SBIDHIGH            0x00000FFC /* BFE_SB Identification High */
#define BFE_RC_MASK             0x0000000f /* Revision Code */
#define BFE_CC_MASK             0x0000fff0 /* Core Code */
#define BFE_VC_MASK             0xffff0000 /* Vendor Code */
#define BFE_CC_SHIFT            4
#define BFE_VC_SHIFT            16

#define BFE_CORE_ILINE20        0x801
#define BFE_CORE_SDRAM          0x803
#define BFE_CORE_PCI            0x804
#define BFE_CORE_MIPS           0x805
#define BFE_CORE_ENET           0x806
#define BFE_CORE_CODEC          0x807
#define BFE_CORE_USB            0x808
#define BFE_CORE_ILINE100       0x80a
#define BFE_CORE_EXTIF          0x811

/* SSB PCI config space registers.  */
#define BFE_BAR0_WIN            0x80
#define BFE_BAR1_WIN            0x84
#define BFE_SPROM_CONTROL       0x88
#define BFE_BAR1_CONTROL        0x8c

/* SSB core and hsot control registers.  */
#define BFE_SSB_CONTROL         0x00000000
#define BFE_SSB_ARBCONTROL      0x00000010
#define BFE_SSB_ISTAT           0x00000020
#define BFE_SSB_IMASK           0x00000024
#define BFE_SSB_MBOX            0x00000028
#define BFE_SSB_BCAST_ADDR      0x00000050
#define BFE_SSB_BCAST_DATA      0x00000054
#define BFE_SSB_PCI_TRANS_0     0x00000100
#define BFE_SSB_PCI_TRANS_1     0x00000104
#define BFE_SSB_PCI_TRANS_2     0x00000108
#define BFE_SSB_SPROM           0x00000800

#define BFE_SSB_PCI_MEM         0x00000000
#define BFE_SSB_PCI_IO          0x00000001
#define BFE_SSB_PCI_CFG0        0x00000002
#define BFE_SSB_PCI_CFG1        0x00000003
#define BFE_SSB_PCI_PREF        0x00000004
#define BFE_SSB_PCI_BURST       0x00000008
#define BFE_SSB_PCI_MASK0       0xfc000000
#define BFE_SSB_PCI_MASK1       0xfc000000
#define BFE_SSB_PCI_MASK2       0xc0000000

#define BFE_DESC_LEN            0x00001fff
#define BFE_DESC_CMASK          0x0ff00000 /* Core specific bits */
#define BFE_DESC_EOT            0x10000000 /* End of Table */
#define BFE_DESC_IOC            0x20000000 /* Interrupt On Completion */
#define BFE_DESC_EOF            0x40000000 /* End of Frame */
#define BFE_DESC_SOF            0x80000000 /* Start of Frame */

#define BFE_RX_CP_THRESHOLD     256
#define BFE_RX_HEADER_LEN       28

#define BFE_RX_FLAG_OFIFO       0x00000001 /* FIFO Overflow */
#define BFE_RX_FLAG_CRCERR      0x00000002 /* CRC Error */
#define BFE_RX_FLAG_SERR        0x00000004 /* Receive Symbol Error */
#define BFE_RX_FLAG_ODD         0x00000008 /* Frame has odd number of nibbles */
#define BFE_RX_FLAG_LARGE       0x00000010 /* Frame is > RX MAX Length */
#define BFE_RX_FLAG_MCAST       0x00000020 /* Dest is Multicast Address */
#define BFE_RX_FLAG_BCAST       0x00000040 /* Dest is Broadcast Address */
#define BFE_RX_FLAG_MISS        0x00000080 /* Received due to promisc mode */
#define BFE_RX_FLAG_LAST        0x00000800 /* Last buffer in frame */
#define BFE_RX_FLAG_ERRORS      (BFE_RX_FLAG_ODD | BFE_RX_FLAG_SERR |   \
                                 BFE_RX_FLAG_CRCERR | BFE_RX_FLAG_OFIFO)

#define BFE_MCAST_TBL_SIZE      32
#define BFE_PCI_DMA             0x40000000
#define BFE_REG_PCI             0x18002000

#define PCI_SETBIT(dev, reg, x, s)  \
        pci_write_config(dev, reg, (pci_read_config(dev, reg, s) | (x)), s)
#define PCI_CLRBIT(dev, reg, x, s)  \
        pci_write_config(dev, reg, (pci_read_config(dev, reg, s) & ~(x)), s)

#define BFE_RX_RING_SIZE        512
#define BFE_TX_RING_SIZE        512
#define BFE_LINK_DOWN           5
#define BFE_TX_LIST_CNT         511
#define BFE_RX_LIST_CNT         511
#define BFE_TX_LIST_SIZE        BFE_TX_LIST_CNT * sizeof(struct bfe_desc)
#define BFE_RX_LIST_SIZE        BFE_RX_LIST_CNT * sizeof(struct bfe_desc)
#define BFE_RX_OFFSET           30
#define BFE_TX_QLEN             256

#define CSR_READ_4(sc, reg)                                             \
        bus_space_read_4(sc->bfe_btag, sc->bfe_bhandle, reg)

#define CSR_WRITE_4(sc, reg, val)                                       \
        bus_space_write_4(sc->bfe_btag, sc->bfe_bhandle, reg, val)

#define BFE_OR(sc, name, val)                                           \
        CSR_WRITE_4(sc, name, CSR_READ_4(sc, name) | val)

#define BFE_AND(sc, name, val)                                          \
        CSR_WRITE_4(sc, name, CSR_READ_4(sc, name) & val)

#define ETHER_ALIGN             2

#define BFE_INC(x, y)           (x) = ((x) == ((y)-1)) ? 0 : (x)+1

struct bfe_data {
        struct mbuf     *bfe_mbuf;
        bus_dmamap_t    bfe_map;
};

struct bfe_desc {
        uint32_t        bfe_ctrl;
        uint32_t        bfe_addr;
};

struct bfe_rxheader {
        uint16_t        len;
        uint16_t        flags;
        uint16_t        pad[12];
};

struct bfe_hw_stats {
        uint32_t tx_good_octets, tx_good_pkts, tx_octets;
        uint32_t tx_pkts, tx_broadcast_pkts, tx_multicast_pkts;
        uint32_t tx_len_64, tx_len_65_to_127, tx_len_128_to_255;
        uint32_t tx_len_256_to_511, tx_len_512_to_1023, tx_len_1024_to_max;
        uint32_t tx_jabber_pkts, tx_oversize_pkts, tx_fragment_pkts;
        uint32_t tx_underruns, tx_total_cols, tx_single_cols;
        uint32_t tx_multiple_cols, tx_excessive_cols, tx_late_cols;
        uint32_t tx_defered, tx_carrier_lost, tx_pause_pkts;
        uint32_t __pad1[8];

        uint32_t rx_good_octets, rx_good_pkts, rx_octets;
        uint32_t rx_pkts, rx_broadcast_pkts, rx_multicast_pkts;
        uint32_t rx_len_64, rx_len_65_to_127, rx_len_128_to_255;
        uint32_t rx_len_256_to_511, rx_len_512_to_1023, rx_len_1024_to_max;
        uint32_t rx_jabber_pkts, rx_oversize_pkts, rx_fragment_pkts;
        uint32_t rx_missed_pkts, rx_crc_align_errs, rx_undersize;
        uint32_t rx_crc_errs, rx_align_errs, rx_symbol_errs;
        uint32_t rx_pause_pkts, rx_nonpause_pkts;
};

struct bfe_softc 
{
        struct arpcom           arpcom;         /* interface info */
        device_t                bfe_dev;
        device_t                bfe_miibus;
        bus_space_handle_t      bfe_bhandle;
        bus_space_tag_t         bfe_btag;
        bus_dma_tag_t           bfe_tag;
        bus_dma_tag_t           bfe_parent_tag;
        bus_dma_tag_t           bfe_tx_tag, bfe_rx_tag;
        bus_dmamap_t            bfe_tx_map, bfe_rx_map;
        void                    *bfe_intrhand;
        struct resource         *bfe_irq;
        struct resource         *bfe_res;
        struct callout          bfe_stat_timer;
        struct bfe_hw_stats     bfe_hwstats;
        struct bfe_desc         *bfe_tx_list, *bfe_rx_list;
        struct bfe_data         bfe_tx_ring[BFE_TX_LIST_CNT]; /* XXX */
        struct bfe_data         bfe_rx_ring[BFE_RX_LIST_CNT]; /* XXX */
        uint32_t                bfe_flags;
        uint32_t                bfe_imask;
        uint32_t                bfe_dma_offset;
        uint32_t                bfe_tx_cnt, bfe_tx_cons, bfe_tx_prod;
        uint32_t                bfe_rx_cnt, bfe_rx_prod, bfe_rx_cons;
        uint32_t                bfe_tx_dma, bfe_rx_dma;
        uint32_t                bfe_link;
        uint8_t                 bfe_phyaddr;    /* Address of the card's PHY */
        uint8_t                 bfe_mdc_port;
        uint8_t                 bfe_core_unit;
        uint8_t                 bfe_up;
        int                     bfe_if_flags;
};

struct bfe_type 
{
        uint16_t                bfe_vid;
        uint16_t                bfe_did;
        const char              *bfe_name;
};

#endif /* _BFE_H */