sys/dev/netif/bge/if_bge.c

   1 /*
   2  * Copyright (c) 2001 Wind River Systems
   3  * Copyright (c) 1997, 1998, 1999, 2001
   4  *      Bill Paul <wpaul@windriver.com>.  All rights reserved.
   5  *
   6  * Redistribution and use in source and binary forms, with or without
   7  * modification, are permitted provided that the following conditions
   8  * are met:
   9  * 1. Redistributions of source code must retain the above copyright
  10  *    notice, this list of conditions and the following disclaimer.
  11  * 2. Redistributions in binary form must reproduce the above copyright
  12  *    notice, this list of conditions and the following disclaimer in the
  13  *    documentation and/or other materials provided with the distribution.
  14  * 3. All advertising materials mentioning features or use of this software
  15  *    must display the following acknowledgement:
  16  *      This product includes software developed by Bill Paul.
  17  * 4. Neither the name of the author nor the names of any co-contributors
  18  *    may be used to endorse or promote products derived from this software
  19  *    without specific prior written permission.
  20  *
  21  * THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND
  22  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
  23  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
  24  * ARE DISCLAIMED.  IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD
  25  * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
  26  * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
  27  * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
  28  * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
  29  * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
  30  * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
  31  * THE POSSIBILITY OF SUCH DAMAGE.
  32  *
  33  * $FreeBSD: src/sys/dev/bge/if_bge.c,v 1.3.2.39 2005/07/03 03:41:18 silby Exp $
  34  */
  35
  36 /*
  37  * Broadcom BCM570x family gigabit ethernet driver for FreeBSD.
  38  *
  39  * Written by Bill Paul <wpaul@windriver.com>
  40  * Senior Engineer, Wind River Systems
  41  */
  42
  43 /*
  44  * The Broadcom BCM5700 is based on technology originally developed by
  45  * Alteon Networks as part of the Tigon I and Tigon II gigabit ethernet
  46  * MAC chips. The BCM5700, sometimes refered to as the Tigon III, has
  47  * two on-board MIPS R4000 CPUs and can have as much as 16MB of external
  48  * SSRAM. The BCM5700 supports TCP, UDP and IP checksum offload, jumbo
  49  * frames, highly configurable RX filtering, and 16 RX and TX queues
  50  * (which, along with RX filter rules, can be used for QOS applications).
  51  * Other features, such as TCP segmentation, may be available as part
  52  * of value-added firmware updates. Unlike the Tigon I and Tigon II,
  53  * firmware images can be stored in hardware and need not be compiled
  54  * into the driver.
  55  *
  56  * The BCM5700 supports the PCI v2.2 and PCI-X v1.0 standards, and will
  57  * function in a 32-bit/64-bit 33/66Mhz bus, or a 64-bit/133Mhz bus.
  58  *
  59  * The BCM5701 is a single-chip solution incorporating both the BCM5700
  60  * MAC and a BCM5401 10/100/1000 PHY. Unlike the BCM5700, the BCM5701
  61  * does not support external SSRAM.
  62  *
  63  * Broadcom also produces a variation of the BCM5700 under the "Altima"
  64  * brand name, which is functionally similar but lacks PCI-X support.
  65  *
  66  * Without external SSRAM, you can only have at most 4 TX rings,
  67  * and the use of the mini RX ring is disabled. This seems to imply
  68  * that these features are simply not available on the BCM5701. As a
  69  * result, this driver does not implement any support for the mini RX
  70  * ring.
  71  */
  72
  73 #include "opt_polling.h"
  74
  75 #include <sys/param.h>
  76 #include <sys/bus.h>
  77 #include <sys/endian.h>
  78 #include <sys/kernel.h>
  79 #include <sys/ktr.h>
  80 #include <sys/interrupt.h>
  81 #include <sys/mbuf.h>
  82 #include <sys/malloc.h>
  83 #include <sys/queue.h>
  84 #include <sys/rman.h>
  85 #include <sys/serialize.h>
  86 #include <sys/socket.h>
  87 #include <sys/sockio.h>
  88 #include <sys/sysctl.h>
  89
  90 #include <netinet/ip.h>
  91 #include <netinet/tcp.h>
  92
  93 #include <net/bpf.h>
  94 #include <net/ethernet.h>
  95 #include <net/if.h>
  96 #include <net/if_arp.h>
  97 #include <net/if_dl.h>
  98 #include <net/if_media.h>
  99 #include <net/if_types.h>
 100 #include <net/ifq_var.h>
 101 #include <net/vlan/if_vlan_var.h>
 102 #include <net/vlan/if_vlan_ether.h>
 103
 104 #include <dev/netif/mii_layer/mii.h>
 105 #include <dev/netif/mii_layer/miivar.h>
 106 #include <dev/netif/mii_layer/brgphyreg.h>
 107
 108 #include <bus/pci/pcidevs.h>
 109 #include <bus/pci/pcireg.h>
 110 #include <bus/pci/pcivar.h>
 111
 112 #include <dev/netif/bge/if_bgereg.h>
 113 #include <dev/netif/bge/if_bgevar.h>
 114
 115 /* "device miibus" required.  See GENERIC if you get errors here. */
 116 #include "miibus_if.h"
 117
 118 #define BGE_CSUM_FEATURES       (CSUM_IP | CSUM_TCP)
 119
 120 static const struct bge_type {
 121         uint16_t                bge_vid;
 122         uint16_t                bge_did;
 123         char                    *bge_name;
 124 } bge_devs[] = {
 125         { PCI_VENDOR_3COM, PCI_PRODUCT_3COM_3C996,
 126                 "3COM 3C996 Gigabit Ethernet" },
 127
 128         { PCI_VENDOR_ALTEON, PCI_PRODUCT_ALTEON_BCM5700,
 129                 "Alteon BCM5700 Gigabit Ethernet" },
 130         { PCI_VENDOR_ALTEON, PCI_PRODUCT_ALTEON_BCM5701,
 131                 "Alteon BCM5701 Gigabit Ethernet" },
 132
 133         { PCI_VENDOR_ALTIMA, PCI_PRODUCT_ALTIMA_AC1000,
 134                 "Altima AC1000 Gigabit Ethernet" },
 135         { PCI_VENDOR_ALTIMA, PCI_PRODUCT_ALTIMA_AC1001,
 136                 "Altima AC1002 Gigabit Ethernet" },
 137         { PCI_VENDOR_ALTIMA, PCI_PRODUCT_ALTIMA_AC9100,
 138                 "Altima AC9100 Gigabit Ethernet" },
 139
 140         { PCI_VENDOR_APPLE, PCI_PRODUCT_APPLE_BCM5701,
 141                 "Apple BCM5701 Gigabit Ethernet" },
 142
 143         { PCI_VENDOR_BROADCOM, PCI_PRODUCT_BROADCOM_BCM5700,
 144                 "Broadcom BCM5700 Gigabit Ethernet" },
 145         { PCI_VENDOR_BROADCOM, PCI_PRODUCT_BROADCOM_BCM5701,
 146                 "Broadcom BCM5701 Gigabit Ethernet" },
 147         { PCI_VENDOR_BROADCOM, PCI_PRODUCT_BROADCOM_BCM5702,
 148                 "Broadcom BCM5702 Gigabit Ethernet" },
 149         { PCI_VENDOR_BROADCOM, PCI_PRODUCT_BROADCOM_BCM5702X,
 150                 "Broadcom BCM5702X Gigabit Ethernet" },
 151         { PCI_VENDOR_BROADCOM, PCI_PRODUCT_BROADCOM_BCM5702_ALT,
 152                 "Broadcom BCM5702 Gigabit Ethernet" },
 153         { PCI_VENDOR_BROADCOM, PCI_PRODUCT_BROADCOM_BCM5703,
 154                 "Broadcom BCM5703 Gigabit Ethernet" },
 155         { PCI_VENDOR_BROADCOM, PCI_PRODUCT_BROADCOM_BCM5703X,
 156                 "Broadcom BCM5703X Gigabit Ethernet" },
 157         { PCI_VENDOR_BROADCOM, PCI_PRODUCT_BROADCOM_BCM5703A3,
 158                 "Broadcom BCM5703 Gigabit Ethernet" },
 159         { PCI_VENDOR_BROADCOM, PCI_PRODUCT_BROADCOM_BCM5704C,
 160                 "Broadcom BCM5704C Dual Gigabit Ethernet" },
 161         { PCI_VENDOR_BROADCOM, PCI_PRODUCT_BROADCOM_BCM5704S,
 162                 "Broadcom BCM5704S Dual Gigabit Ethernet" },
 163         { PCI_VENDOR_BROADCOM, PCI_PRODUCT_BROADCOM_BCM5704S_ALT,
 164                 "Broadcom BCM5704S Dual Gigabit Ethernet" },
 165         { PCI_VENDOR_BROADCOM, PCI_PRODUCT_BROADCOM_BCM5705,
 166                 "Broadcom BCM5705 Gigabit Ethernet" },
 167         { PCI_VENDOR_BROADCOM, PCI_PRODUCT_BROADCOM_BCM5705F,
 168                 "Broadcom BCM5705F Gigabit Ethernet" },
 169         { PCI_VENDOR_BROADCOM, PCI_PRODUCT_BROADCOM_BCM5705K,
 170                 "Broadcom BCM5705K Gigabit Ethernet" },
 171         { PCI_VENDOR_BROADCOM, PCI_PRODUCT_BROADCOM_BCM5705M,
 172                 "Broadcom BCM5705M Gigabit Ethernet" },
 173         { PCI_VENDOR_BROADCOM, PCI_PRODUCT_BROADCOM_BCM5705M_ALT,
 174                 "Broadcom BCM5705M Gigabit Ethernet" },
 175         { PCI_VENDOR_BROADCOM, PCI_PRODUCT_BROADCOM_BCM5714,
 176                 "Broadcom BCM5714C Gigabit Ethernet" },
 177         { PCI_VENDOR_BROADCOM, PCI_PRODUCT_BROADCOM_BCM5714S,
 178                 "Broadcom BCM5714S Gigabit Ethernet" },
 179         { PCI_VENDOR_BROADCOM, PCI_PRODUCT_BROADCOM_BCM5715,
 180                 "Broadcom BCM5715 Gigabit Ethernet" },
 181         { PCI_VENDOR_BROADCOM, PCI_PRODUCT_BROADCOM_BCM5715S,
 182                 "Broadcom BCM5715S Gigabit Ethernet" },
 183         { PCI_VENDOR_BROADCOM, PCI_PRODUCT_BROADCOM_BCM5720,
 184                 "Broadcom BCM5720 Gigabit Ethernet" },
 185         { PCI_VENDOR_BROADCOM, PCI_PRODUCT_BROADCOM_BCM5721,
 186                 "Broadcom BCM5721 Gigabit Ethernet" },
 187         { PCI_VENDOR_BROADCOM, PCI_PRODUCT_BROADCOM_BCM5722,
 188                 "Broadcom BCM5722 Gigabit Ethernet" },
 189         { PCI_VENDOR_BROADCOM, PCI_PRODUCT_BROADCOM_BCM5723,
 190                 "Broadcom BCM5723 Gigabit Ethernet" },
 191         { PCI_VENDOR_BROADCOM, PCI_PRODUCT_BROADCOM_BCM5750,
 192                 "Broadcom BCM5750 Gigabit Ethernet" },
 193         { PCI_VENDOR_BROADCOM, PCI_PRODUCT_BROADCOM_BCM5750M,
 194                 "Broadcom BCM5750M Gigabit Ethernet" },
 195         { PCI_VENDOR_BROADCOM, PCI_PRODUCT_BROADCOM_BCM5751,
 196                 "Broadcom BCM5751 Gigabit Ethernet" },
 197         { PCI_VENDOR_BROADCOM, PCI_PRODUCT_BROADCOM_BCM5751F,
 198                 "Broadcom BCM5751F Gigabit Ethernet" },
 199         { PCI_VENDOR_BROADCOM, PCI_PRODUCT_BROADCOM_BCM5751M,
 200                 "Broadcom BCM5751M Gigabit Ethernet" },
 201         { PCI_VENDOR_BROADCOM, PCI_PRODUCT_BROADCOM_BCM5752,
 202                 "Broadcom BCM5752 Gigabit Ethernet" },
 203         { PCI_VENDOR_BROADCOM, PCI_PRODUCT_BROADCOM_BCM5752M,
 204                 "Broadcom BCM5752M Gigabit Ethernet" },
 205         { PCI_VENDOR_BROADCOM, PCI_PRODUCT_BROADCOM_BCM5753,
 206                 "Broadcom BCM5753 Gigabit Ethernet" },
 207         { PCI_VENDOR_BROADCOM, PCI_PRODUCT_BROADCOM_BCM5753F,
 208                 "Broadcom BCM5753F Gigabit Ethernet" },
 209         { PCI_VENDOR_BROADCOM, PCI_PRODUCT_BROADCOM_BCM5753M,
 210                 "Broadcom BCM5753M Gigabit Ethernet" },
 211         { PCI_VENDOR_BROADCOM, PCI_PRODUCT_BROADCOM_BCM5754,
 212                 "Broadcom BCM5754 Gigabit Ethernet" },
 213         { PCI_VENDOR_BROADCOM, PCI_PRODUCT_BROADCOM_BCM5754M,
 214                 "Broadcom BCM5754M Gigabit Ethernet" },
 215         { PCI_VENDOR_BROADCOM, PCI_PRODUCT_BROADCOM_BCM5755,
 216                 "Broadcom BCM5755 Gigabit Ethernet" },
 217         { PCI_VENDOR_BROADCOM, PCI_PRODUCT_BROADCOM_BCM5755M,
 218                 "Broadcom BCM5755M Gigabit Ethernet" },
 219         { PCI_VENDOR_BROADCOM, PCI_PRODUCT_BROADCOM_BCM5756,
 220                 "Broadcom BCM5756 Gigabit Ethernet" },
 221         { PCI_VENDOR_BROADCOM, PCI_PRODUCT_BROADCOM_BCM5761,
 222                 "Broadcom BCM5761 Gigabit Ethernet" },
 223         { PCI_VENDOR_BROADCOM, PCI_PRODUCT_BROADCOM_BCM5761E,
 224                 "Broadcom BCM5761E Gigabit Ethernet" },
 225         { PCI_VENDOR_BROADCOM, PCI_PRODUCT_BROADCOM_BCM5761S,
 226                 "Broadcom BCM5761S Gigabit Ethernet" },
 227         { PCI_VENDOR_BROADCOM, PCI_PRODUCT_BROADCOM_BCM5761SE,
 228                 "Broadcom BCM5761SE Gigabit Ethernet" },
 229         { PCI_VENDOR_BROADCOM, PCI_PRODUCT_BROADCOM_BCM5764,
 230                 "Broadcom BCM5764 Gigabit Ethernet" },
 231         { PCI_VENDOR_BROADCOM, PCI_PRODUCT_BROADCOM_BCM5780,
 232                 "Broadcom BCM5780 Gigabit Ethernet" },
 233         { PCI_VENDOR_BROADCOM, PCI_PRODUCT_BROADCOM_BCM5780S,
 234                 "Broadcom BCM5780S Gigabit Ethernet" },
 235         { PCI_VENDOR_BROADCOM, PCI_PRODUCT_BROADCOM_BCM5781,
 236                 "Broadcom BCM5781 Gigabit Ethernet" },
 237         { PCI_VENDOR_BROADCOM, PCI_PRODUCT_BROADCOM_BCM5782,
 238                 "Broadcom BCM5782 Gigabit Ethernet" },
 239         { PCI_VENDOR_BROADCOM, PCI_PRODUCT_BROADCOM_BCM5784,
 240                 "Broadcom BCM5784 Gigabit Ethernet" },
 241         { PCI_VENDOR_BROADCOM, PCI_PRODUCT_BROADCOM_BCM5785F,
 242                 "Broadcom BCM5785F Gigabit Ethernet" },
 243         { PCI_VENDOR_BROADCOM, PCI_PRODUCT_BROADCOM_BCM5785G,
 244                 "Broadcom BCM5785G Gigabit Ethernet" },
 245         { PCI_VENDOR_BROADCOM, PCI_PRODUCT_BROADCOM_BCM5786,
 246                 "Broadcom BCM5786 Gigabit Ethernet" },
 247         { PCI_VENDOR_BROADCOM, PCI_PRODUCT_BROADCOM_BCM5787,
 248                 "Broadcom BCM5787 Gigabit Ethernet" },
 249         { PCI_VENDOR_BROADCOM, PCI_PRODUCT_BROADCOM_BCM5787F,
 250                 "Broadcom BCM5787F Gigabit Ethernet" },
 251         { PCI_VENDOR_BROADCOM, PCI_PRODUCT_BROADCOM_BCM5787M,
 252                 "Broadcom BCM5787M Gigabit Ethernet" },
 253         { PCI_VENDOR_BROADCOM, PCI_PRODUCT_BROADCOM_BCM5788,
 254                 "Broadcom BCM5788 Gigabit Ethernet" },
 255         { PCI_VENDOR_BROADCOM, PCI_PRODUCT_BROADCOM_BCM5789,
 256                 "Broadcom BCM5789 Gigabit Ethernet" },
 257         { PCI_VENDOR_BROADCOM, PCI_PRODUCT_BROADCOM_BCM5901,
 258                 "Broadcom BCM5901 Fast Ethernet" },
 259         { PCI_VENDOR_BROADCOM, PCI_PRODUCT_BROADCOM_BCM5901A2,
 260                 "Broadcom BCM5901A2 Fast Ethernet" },
 261         { PCI_VENDOR_BROADCOM, PCI_PRODUCT_BROADCOM_BCM5903M,
 262                 "Broadcom BCM5903M Fast Ethernet" },
 263         { PCI_VENDOR_BROADCOM, PCI_PRODUCT_BROADCOM_BCM5906,
 264                 "Broadcom BCM5906 Fast Ethernet"},
 265         { PCI_VENDOR_BROADCOM, PCI_PRODUCT_BROADCOM_BCM5906M,
 266                 "Broadcom BCM5906M Fast Ethernet"},
 267         { PCI_VENDOR_BROADCOM, PCI_PRODUCT_BROADCOM_BCM57760,
 268                 "Broadcom BCM57760 Gigabit Ethernet"},
 269         { PCI_VENDOR_BROADCOM, PCI_PRODUCT_BROADCOM_BCM57780,
 270                 "Broadcom BCM57780 Gigabit Ethernet"},
 271         { PCI_VENDOR_BROADCOM, PCI_PRODUCT_BROADCOM_BCM57788,
 272                 "Broadcom BCM57788 Gigabit Ethernet"},
 273         { PCI_VENDOR_BROADCOM, PCI_PRODUCT_BROADCOM_BCM57790,
 274                 "Broadcom BCM57790 Gigabit Ethernet"},
 275         { PCI_VENDOR_SCHNEIDERKOCH, PCI_PRODUCT_SCHNEIDERKOCH_SK_9DX1,
 276                 "SysKonnect Gigabit Ethernet" },
 277
 278         { 0, 0, NULL }
 279 };
 280
 281 #define BGE_IS_JUMBO_CAPABLE(sc)        ((sc)->bge_flags & BGE_FLAG_JUMBO)
 282 #define BGE_IS_5700_FAMILY(sc)          ((sc)->bge_flags & BGE_FLAG_5700_FAMILY)
 283 #define BGE_IS_5705_PLUS(sc)            ((sc)->bge_flags & BGE_FLAG_5705_PLUS)
 284 #define BGE_IS_5714_FAMILY(sc)          ((sc)->bge_flags & BGE_FLAG_5714_FAMILY)
 285 #define BGE_IS_575X_PLUS(sc)            ((sc)->bge_flags & BGE_FLAG_575X_PLUS)
 286 #define BGE_IS_5755_PLUS(sc)            ((sc)->bge_flags & BGE_FLAG_5755_PLUS)
 287 #define BGE_IS_5788(sc)                 ((sc)->bge_flags & BGE_FLAG_5788)
 288
 289 #define BGE_IS_CRIPPLED(sc)             \
 290         (BGE_IS_5788((sc)) || (sc)->bge_asicrev == BGE_ASICREV_BCM5700)
 291
 292 typedef int     (*bge_eaddr_fcn_t)(struct bge_softc *, uint8_t[]);
 293
 294 static int      bge_probe(device_t);
 295 static int      bge_attach(device_t);
 296 static int      bge_detach(device_t);
 297 static void     bge_txeof(struct bge_softc *, uint16_t);
 298 static void     bge_rxeof(struct bge_softc *, uint16_t);
 299
 300 static void     bge_tick(void *);
 301 static void     bge_stats_update(struct bge_softc *);
 302 static void     bge_stats_update_regs(struct bge_softc *);
 303 static struct mbuf *
 304                 bge_defrag_shortdma(struct mbuf *);
 305 static int      bge_encap(struct bge_softc *, struct mbuf **, uint32_t *);
 306 static int      bge_setup_tso(struct bge_softc *, struct mbuf **,
 307                     uint16_t *, uint16_t *);
 308
 309 #ifdef DEVICE_POLLING
 310 static void     bge_poll(struct ifnet *ifp, enum poll_cmd cmd, int count);
 311 #endif
 312 static void     bge_intr_crippled(void *);
 313 static void     bge_intr_legacy(void *);
 314 static void     bge_msi(void *);
 315 static void     bge_msi_oneshot(void *);
 316 static void     bge_intr(struct bge_softc *);
 317 static void     bge_enable_intr(struct bge_softc *);
 318 static void     bge_disable_intr(struct bge_softc *);
 319 static void     bge_start(struct ifnet *);
 320 static int      bge_ioctl(struct ifnet *, u_long, caddr_t, struct ucred *);
 321 static void     bge_init(void *);
 322 static void     bge_stop(struct bge_softc *);
 323 static void     bge_watchdog(struct ifnet *);
 324 static void     bge_shutdown(device_t);
 325 static int      bge_suspend(device_t);
 326 static int      bge_resume(device_t);
 327 static int      bge_ifmedia_upd(struct ifnet *);
 328 static void     bge_ifmedia_sts(struct ifnet *, struct ifmediareq *);
 329
 330 static uint8_t  bge_nvram_getbyte(struct bge_softc *, int, uint8_t *);
 331 static int      bge_read_nvram(struct bge_softc *, caddr_t, int, int);
 332
 333 static uint8_t  bge_eeprom_getbyte(struct bge_softc *, uint32_t, uint8_t *);
 334 static int      bge_read_eeprom(struct bge_softc *, caddr_t, uint32_t, size_t);
 335
 336 static void     bge_setmulti(struct bge_softc *);
 337 static void     bge_setpromisc(struct bge_softc *);
 338 static void     bge_enable_msi(struct bge_softc *sc);
 339
 340 static int      bge_alloc_jumbo_mem(struct bge_softc *);
 341 static void     bge_free_jumbo_mem(struct bge_softc *);
 342 static struct bge_jslot
 343                 *bge_jalloc(struct bge_softc *);
 344 static void     bge_jfree(void *);
 345 static void     bge_jref(void *);
 346 static int      bge_newbuf_std(struct bge_softc *, int, int);
 347 static int      bge_newbuf_jumbo(struct bge_softc *, int, int);
 348 static void     bge_setup_rxdesc_std(struct bge_softc *, int);
 349 static void     bge_setup_rxdesc_jumbo(struct bge_softc *, int);
 350 static int      bge_init_rx_ring_std(struct bge_softc *);
 351 static void     bge_free_rx_ring_std(struct bge_softc *);
 352 static int      bge_init_rx_ring_jumbo(struct bge_softc *);
 353 static void     bge_free_rx_ring_jumbo(struct bge_softc *);
 354 static void     bge_free_tx_ring(struct bge_softc *);
 355 static int      bge_init_tx_ring(struct bge_softc *);
 356
 357 static int      bge_chipinit(struct bge_softc *);
 358 static int      bge_blockinit(struct bge_softc *);
 359 static void     bge_stop_block(struct bge_softc *, bus_size_t, uint32_t);
 360
 361 static uint32_t bge_readmem_ind(struct bge_softc *, uint32_t);
 362 static void     bge_writemem_ind(struct bge_softc *, uint32_t, uint32_t);
 363 #ifdef notdef
 364 static uint32_t bge_readreg_ind(struct bge_softc *, uint32_t);
 365 #endif
 366 static void     bge_writereg_ind(struct bge_softc *, uint32_t, uint32_t);
 367 static void     bge_writemem_direct(struct bge_softc *, uint32_t, uint32_t);
 368 static void     bge_writembx(struct bge_softc *, int, int);
 369
 370 static int      bge_miibus_readreg(device_t, int, int);
 371 static int      bge_miibus_writereg(device_t, int, int, int);
 372 static void     bge_miibus_statchg(device_t);
 373 static void     bge_bcm5700_link_upd(struct bge_softc *, uint32_t);
 374 static void     bge_tbi_link_upd(struct bge_softc *, uint32_t);
 375 static void     bge_copper_link_upd(struct bge_softc *, uint32_t);
 376 static void     bge_autopoll_link_upd(struct bge_softc *, uint32_t);
 377 static void     bge_link_poll(struct bge_softc *);
 378
 379 static void     bge_reset(struct bge_softc *);
 380
 381 static int      bge_dma_alloc(struct bge_softc *);
 382 static void     bge_dma_free(struct bge_softc *);
 383 static int      bge_dma_block_alloc(struct bge_softc *, bus_size_t,
 384                                     bus_dma_tag_t *, bus_dmamap_t *,
 385                                     void **, bus_addr_t *);
 386 static void     bge_dma_block_free(bus_dma_tag_t, bus_dmamap_t, void *);
 387
 388 static int      bge_get_eaddr_mem(struct bge_softc *, uint8_t[]);
 389 static int      bge_get_eaddr_nvram(struct bge_softc *, uint8_t[]);
 390 static int      bge_get_eaddr_eeprom(struct bge_softc *, uint8_t[]);
 391 static int      bge_get_eaddr(struct bge_softc *, uint8_t[]);
 392
 393 static void     bge_coal_change(struct bge_softc *);
 394 static int      bge_sysctl_rx_coal_ticks(SYSCTL_HANDLER_ARGS);
 395 static int      bge_sysctl_tx_coal_ticks(SYSCTL_HANDLER_ARGS);
 396 static int      bge_sysctl_rx_coal_bds(SYSCTL_HANDLER_ARGS);
 397 static int      bge_sysctl_tx_coal_bds(SYSCTL_HANDLER_ARGS);
 398 static int      bge_sysctl_rx_coal_ticks_int(SYSCTL_HANDLER_ARGS);
 399 static int      bge_sysctl_tx_coal_ticks_int(SYSCTL_HANDLER_ARGS);
 400 static int      bge_sysctl_rx_coal_bds_int(SYSCTL_HANDLER_ARGS);
 401 static int      bge_sysctl_tx_coal_bds_int(SYSCTL_HANDLER_ARGS);
 402 static int      bge_sysctl_coal_chg(SYSCTL_HANDLER_ARGS, uint32_t *,
 403                     int, int, uint32_t);
 404
 405 /*
 406  * Set following tunable to 1 for some IBM blade servers with the DNLK
 407  * switch module. Auto negotiation is broken for those configurations.
 408  */
 409 static int      bge_fake_autoneg = 0;
 410 TUNABLE_INT("hw.bge.fake_autoneg", &bge_fake_autoneg);
 411
 412 static int      bge_msi_enable = 1;
 413 TUNABLE_INT("hw.bge.msi.enable", &bge_msi_enable);
 414
 415 #if !defined(KTR_IF_BGE)
 416 #define KTR_IF_BGE      KTR_ALL
 417 #endif
 418 KTR_INFO_MASTER(if_bge);
 419 KTR_INFO(KTR_IF_BGE, if_bge, intr, 0, "intr");
 420 KTR_INFO(KTR_IF_BGE, if_bge, rx_pkt, 1, "rx_pkt");
 421 KTR_INFO(KTR_IF_BGE, if_bge, tx_pkt, 2, "tx_pkt");
 422 #define logif(name)     KTR_LOG(if_bge_ ## name)
 423
 424 static device_method_t bge_methods[] = {
 425         /* Device interface */
 426         DEVMETHOD(device_probe,         bge_probe),
 427         DEVMETHOD(device_attach,        bge_attach),
 428         DEVMETHOD(device_detach,        bge_detach),
 429         DEVMETHOD(device_shutdown,      bge_shutdown),
 430         DEVMETHOD(device_suspend,       bge_suspend),
 431         DEVMETHOD(device_resume,        bge_resume),
 432
 433         /* bus interface */
 434         DEVMETHOD(bus_print_child,      bus_generic_print_child),
 435         DEVMETHOD(bus_driver_added,     bus_generic_driver_added),
 436
 437         /* MII interface */
 438         DEVMETHOD(miibus_readreg,       bge_miibus_readreg),
 439         DEVMETHOD(miibus_writereg,      bge_miibus_writereg),
 440         DEVMETHOD(miibus_statchg,       bge_miibus_statchg),
 441
 442         { 0, 0 }
 443 };
 444
 445 static DEFINE_CLASS_0(bge, bge_driver, bge_methods, sizeof(struct bge_softc));
 446 static devclass_t bge_devclass;
 447
 448 DECLARE_DUMMY_MODULE(if_bge);
 449 DRIVER_MODULE(if_bge, pci, bge_driver, bge_devclass, NULL, NULL);
 450 DRIVER_MODULE(miibus, bge, miibus_driver, miibus_devclass, NULL, NULL);
 451
 452 static uint32_t
 453 bge_readmem_ind(struct bge_softc *sc, uint32_t off)
 454 {
 455         device_t dev = sc->bge_dev;
 456         uint32_t val;
 457
 458         if (sc->bge_asicrev == BGE_ASICREV_BCM5906 &&
 459             off >= BGE_STATS_BLOCK && off < BGE_SEND_RING_1_TO_4)
 460                 return 0;
 461
 462         pci_write_config(dev, BGE_PCI_MEMWIN_BASEADDR, off, 4);
 463         val = pci_read_config(dev, BGE_PCI_MEMWIN_DATA, 4);
 464         pci_write_config(dev, BGE_PCI_MEMWIN_BASEADDR, 0, 4);
 465         return (val);
 466 }
 467
 468 static void
 469 bge_writemem_ind(struct bge_softc *sc, uint32_t off, uint32_t val)
 470 {
 471         device_t dev = sc->bge_dev;
 472
 473         if (sc->bge_asicrev == BGE_ASICREV_BCM5906 &&
 474             off >= BGE_STATS_BLOCK && off < BGE_SEND_RING_1_TO_4)
 475                 return;
 476
 477         pci_write_config(dev, BGE_PCI_MEMWIN_BASEADDR, off, 4);
 478         pci_write_config(dev, BGE_PCI_MEMWIN_DATA, val, 4);
 479         pci_write_config(dev, BGE_PCI_MEMWIN_BASEADDR, 0, 4);
 480 }
 481
 482 #ifdef notdef
 483 static uint32_t
 484 bge_readreg_ind(struct bge_softc *sc, uin32_t off)
 485 {
 486         device_t dev = sc->bge_dev;
 487
 488         pci_write_config(dev, BGE_PCI_REG_BASEADDR, off, 4);
 489         return(pci_read_config(dev, BGE_PCI_REG_DATA, 4));
 490 }
 491 #endif
 492
 493 static void
 494 bge_writereg_ind(struct bge_softc *sc, uint32_t off, uint32_t val)
 495 {
 496         device_t dev = sc->bge_dev;
 497
 498         pci_write_config(dev, BGE_PCI_REG_BASEADDR, off, 4);
 499         pci_write_config(dev, BGE_PCI_REG_DATA, val, 4);
 500 }
 501
 502 static void
 503 bge_writemem_direct(struct bge_softc *sc, uint32_t off, uint32_t val)
 504 {
 505         CSR_WRITE_4(sc, off, val);
 506 }
 507
 508 static void
 509 bge_writembx(struct bge_softc *sc, int off, int val)
 510 {
 511         if (sc->bge_asicrev == BGE_ASICREV_BCM5906)
 512                 off += BGE_LPMBX_IRQ0_HI - BGE_MBX_IRQ0_HI;
 513
 514         CSR_WRITE_4(sc, off, val);
 515         if (sc->bge_mbox_reorder)
 516                 CSR_READ_4(sc, off);
 517 }
 518
 519 static uint8_t
 520 bge_nvram_getbyte(struct bge_softc *sc, int addr, uint8_t *dest)
 521 {
 522         uint32_t access, byte = 0;
 523         int i;
 524
 525         /* Lock. */
 526         CSR_WRITE_4(sc, BGE_NVRAM_SWARB, BGE_NVRAMSWARB_SET1);
 527         for (i = 0; i < 8000; i++) {
 528                 if (CSR_READ_4(sc, BGE_NVRAM_SWARB) & BGE_NVRAMSWARB_GNT1)
 529                         break;
 530                 DELAY(20);
 531         }
 532         if (i == 8000)
 533                 return (1);
 534
 535         /* Enable access. */
 536         access = CSR_READ_4(sc, BGE_NVRAM_ACCESS);
 537         CSR_WRITE_4(sc, BGE_NVRAM_ACCESS, access | BGE_NVRAMACC_ENABLE);
 538
 539         CSR_WRITE_4(sc, BGE_NVRAM_ADDR, addr & 0xfffffffc);
 540         CSR_WRITE_4(sc, BGE_NVRAM_CMD, BGE_NVRAM_READCMD);
 541         for (i = 0; i < BGE_TIMEOUT * 10; i++) {
 542                 DELAY(10);
 543                 if (CSR_READ_4(sc, BGE_NVRAM_CMD) & BGE_NVRAMCMD_DONE) {
 544                         DELAY(10);
 545                         break;
 546                 }
 547         }
 548
 549         if (i == BGE_TIMEOUT * 10) {
 550                 if_printf(&sc->arpcom.ac_if, "nvram read timed out\n");
 551                 return (1);
 552         }
 553
 554         /* Get result. */
 555         byte = CSR_READ_4(sc, BGE_NVRAM_RDDATA);
 556
 557         *dest = (bswap32(byte) >> ((addr % 4) * 8)) & 0xFF;
 558
 559         /* Disable access. */
 560         CSR_WRITE_4(sc, BGE_NVRAM_ACCESS, access);
 561
 562         /* Unlock. */
 563         CSR_WRITE_4(sc, BGE_NVRAM_SWARB, BGE_NVRAMSWARB_CLR1);
 564         CSR_READ_4(sc, BGE_NVRAM_SWARB);
 565
 566         return (0);
 567 }
 568
 569 /*
 570  * Read a sequence of bytes from NVRAM.
 571  */
 572 static int
 573 bge_read_nvram(struct bge_softc *sc, caddr_t dest, int off, int cnt)
 574 {
 575         int err = 0, i;
 576         uint8_t byte = 0;
 577
 578         if (sc->bge_asicrev != BGE_ASICREV_BCM5906)
 579                 return (1);
 580
 581         for (i = 0; i < cnt; i++) {
 582                 err = bge_nvram_getbyte(sc, off + i, &byte);
 583                 if (err)
 584                         break;
 585                 *(dest + i) = byte;
 586         }
 587
 588         return (err ? 1 : 0);
 589 }
 590
 591 /*
 592  * Read a byte of data stored in the EEPROM at address 'addr.' The
 593  * BCM570x supports both the traditional bitbang interface and an
 594  * auto access interface for reading the EEPROM. We use the auto
 595  * access method.
 596  */
 597 static uint8_t
 598 bge_eeprom_getbyte(struct bge_softc *sc, uint32_t addr, uint8_t *dest)
 599 {
 600         int i;
 601         uint32_t byte = 0;
 602
 603         /*
 604          * Enable use of auto EEPROM access so we can avoid
 605          * having to use the bitbang method.
 606          */
 607         BGE_SETBIT(sc, BGE_MISC_LOCAL_CTL, BGE_MLC_AUTO_EEPROM);
 608
 609         /* Reset the EEPROM, load the clock period. */
 610         CSR_WRITE_4(sc, BGE_EE_ADDR,
 611             BGE_EEADDR_RESET|BGE_EEHALFCLK(BGE_HALFCLK_384SCL));
 612         DELAY(20);
 613
 614         /* Issue the read EEPROM command. */
 615         CSR_WRITE_4(sc, BGE_EE_ADDR, BGE_EE_READCMD | addr);
 616
 617         /* Wait for completion */
 618         for(i = 0; i < BGE_TIMEOUT * 10; i++) {
 619                 DELAY(10);
 620                 if (CSR_READ_4(sc, BGE_EE_ADDR) & BGE_EEADDR_DONE)
 621                         break;
 622         }
 623
 624         if (i == BGE_TIMEOUT) {
 625                 if_printf(&sc->arpcom.ac_if, "eeprom read timed out\n");
 626                 return(1);
 627         }
 628
 629         /* Get result. */
 630         byte = CSR_READ_4(sc, BGE_EE_DATA);
 631
 632         *dest = (byte >> ((addr % 4) * 8)) & 0xFF;
 633
 634         return(0);
 635 }
 636
 637 /*
 638  * Read a sequence of bytes from the EEPROM.
 639  */
 640 static int
 641 bge_read_eeprom(struct bge_softc *sc, caddr_t dest, uint32_t off, size_t len)
 642 {
 643         size_t i;
 644         int err;
 645         uint8_t byte;
 646
 647         for (byte = 0, err = 0, i = 0; i < len; i++) {
 648                 err = bge_eeprom_getbyte(sc, off + i, &byte);
 649                 if (err)
 650                         break;
 651                 *(dest + i) = byte;
 652         }
 653
 654         return(err ? 1 : 0);
 655 }
 656
 657 static int
 658 bge_miibus_readreg(device_t dev, int phy, int reg)
 659 {
 660         struct bge_softc *sc = device_get_softc(dev);
 661         uint32_t val;
 662         int i;
 663
 664         KASSERT(phy == sc->bge_phyno,
 665             ("invalid phyno %d, should be %d", phy, sc->bge_phyno));
 666
 667         /* Clear the autopoll bit if set, otherwise may trigger PCI errors. */
 668         if (sc->bge_mi_mode & BGE_MIMODE_AUTOPOLL) {
 669                 CSR_WRITE_4(sc, BGE_MI_MODE,
 670                     sc->bge_mi_mode & ~BGE_MIMODE_AUTOPOLL);
 671                 DELAY(80);
 672         }
 673
 674         CSR_WRITE_4(sc, BGE_MI_COMM, BGE_MICMD_READ | BGE_MICOMM_BUSY |
 675             BGE_MIPHY(phy) | BGE_MIREG(reg));
 676
 677         /* Poll for the PHY register access to complete. */
 678         for (i = 0; i < BGE_TIMEOUT; i++) {
 679                 DELAY(10);
 680                 val = CSR_READ_4(sc, BGE_MI_COMM);
 681                 if ((val & BGE_MICOMM_BUSY) == 0) {
 682                         DELAY(5);
 683                         val = CSR_READ_4(sc, BGE_MI_COMM);
 684                         break;
 685                 }
 686         }
 687         if (i == BGE_TIMEOUT) {
 688                 if_printf(&sc->arpcom.ac_if, "PHY read timed out "
 689                     "(phy %d, reg %d, val 0x%08x)\n", phy, reg, val);
 690                 val = 0;
 691         }
 692
 693         /* Restore the autopoll bit if necessary. */
 694         if (sc->bge_mi_mode & BGE_MIMODE_AUTOPOLL) {
 695                 CSR_WRITE_4(sc, BGE_MI_MODE, sc->bge_mi_mode);
 696                 DELAY(80);
 697         }
 698
 699         if (val & BGE_MICOMM_READFAIL)
 700                 return 0;
 701
 702         return (val & 0xFFFF);
 703 }
 704
 705 static int
 706 bge_miibus_writereg(device_t dev, int phy, int reg, int val)
 707 {
 708         struct bge_softc *sc = device_get_softc(dev);
 709         int i;
 710
 711         KASSERT(phy == sc->bge_phyno,
 712             ("invalid phyno %d, should be %d", phy, sc->bge_phyno));
 713
 714         if (sc->bge_asicrev == BGE_ASICREV_BCM5906 &&
 715             (reg == BRGPHY_MII_1000CTL || reg == BRGPHY_MII_AUXCTL))
 716                return 0;
 717
 718         /* Clear the autopoll bit if set, otherwise may trigger PCI errors. */
 719         if (sc->bge_mi_mode & BGE_MIMODE_AUTOPOLL) {
 720                 CSR_WRITE_4(sc, BGE_MI_MODE,
 721                     sc->bge_mi_mode & ~BGE_MIMODE_AUTOPOLL);
 722                 DELAY(80);
 723         }
 724
 725         CSR_WRITE_4(sc, BGE_MI_COMM, BGE_MICMD_WRITE | BGE_MICOMM_BUSY |
 726             BGE_MIPHY(phy) | BGE_MIREG(reg) | val);
 727
 728         for (i = 0; i < BGE_TIMEOUT; i++) {
 729                 DELAY(10);
 730                 if (!(CSR_READ_4(sc, BGE_MI_COMM) & BGE_MICOMM_BUSY)) {
 731                         DELAY(5);
 732                         CSR_READ_4(sc, BGE_MI_COMM); /* dummy read */
 733                         break;
 734                 }
 735         }
 736         if (i == BGE_TIMEOUT) {
 737                 if_printf(&sc->arpcom.ac_if, "PHY write timed out "
 738                     "(phy %d, reg %d, val %d)\n", phy, reg, val);
 739         }
 740
 741         /* Restore the autopoll bit if necessary. */
 742         if (sc->bge_mi_mode & BGE_MIMODE_AUTOPOLL) {
 743                 CSR_WRITE_4(sc, BGE_MI_MODE, sc->bge_mi_mode);
 744                 DELAY(80);
 745         }
 746
 747         return 0;
 748 }
 749
 750 static void
 751 bge_miibus_statchg(device_t dev)
 752 {
 753         struct bge_softc *sc;
 754         struct mii_data *mii;
 755
 756         sc = device_get_softc(dev);
 757         mii = device_get_softc(sc->bge_miibus);
 758
 759         if ((mii->mii_media_status & (IFM_ACTIVE | IFM_AVALID)) ==
 760             (IFM_ACTIVE | IFM_AVALID)) {
 761                 switch (IFM_SUBTYPE(mii->mii_media_active)) {
 762                 case IFM_10_T:
 763                 case IFM_100_TX:
 764                         sc->bge_link = 1;
 765                         break;
 766                 case IFM_1000_T:
 767                 case IFM_1000_SX:
 768                 case IFM_2500_SX:
 769                         if (sc->bge_asicrev != BGE_ASICREV_BCM5906)
 770                                 sc->bge_link = 1;
 771                         else
 772                                 sc->bge_link = 0;
 773                         break;
 774                 default:
 775                         sc->bge_link = 0;
 776                         break;
 777                 }
 778         } else {
 779                 sc->bge_link = 0;
 780         }
 781         if (sc->bge_link == 0)
 782                 return;
 783
 784         BGE_CLRBIT(sc, BGE_MAC_MODE, BGE_MACMODE_PORTMODE);
 785         if (IFM_SUBTYPE(mii->mii_media_active) == IFM_1000_T ||
 786             IFM_SUBTYPE(mii->mii_media_active) == IFM_1000_SX) {
 787                 BGE_SETBIT(sc, BGE_MAC_MODE, BGE_PORTMODE_GMII);
 788         } else {
 789                 BGE_SETBIT(sc, BGE_MAC_MODE, BGE_PORTMODE_MII);
 790         }
 791
 792         if ((mii->mii_media_active & IFM_GMASK) == IFM_FDX) {
 793                 BGE_CLRBIT(sc, BGE_MAC_MODE, BGE_MACMODE_HALF_DUPLEX);
 794         } else {
 795                 BGE_SETBIT(sc, BGE_MAC_MODE, BGE_MACMODE_HALF_DUPLEX);
 796         }
 797 }
 798
 799 /*
 800  * Memory management for jumbo frames.
 801  */
 802 static int
 803 bge_alloc_jumbo_mem(struct bge_softc *sc)
 804 {
 805         struct ifnet *ifp = &sc->arpcom.ac_if;
 806         struct bge_jslot *entry;
 807         uint8_t *ptr;
 808         bus_addr_t paddr;
 809         int i, error;
 810
 811         /*
 812          * Create tag for jumbo mbufs.
 813          * This is really a bit of a kludge. We allocate a special
 814          * jumbo buffer pool which (thanks to the way our DMA
 815          * memory allocation works) will consist of contiguous
 816          * pages. This means that even though a jumbo buffer might
 817          * be larger than a page size, we don't really need to
 818          * map it into more than one DMA segment. However, the
 819          * default mbuf tag will result in multi-segment mappings,
 820          * so we have to create a special jumbo mbuf tag that
 821          * lets us get away with mapping the jumbo buffers as
 822          * a single segment. I think eventually the driver should
 823          * be changed so that it uses ordinary mbufs and cluster
 824          * buffers, i.e. jumbo frames can span multiple DMA
 825          * descriptors. But that's a project for another day.
 826          */
 827
 828         /*
 829          * Create DMA stuffs for jumbo RX ring.
 830          */
 831         error = bge_dma_block_alloc(sc, BGE_JUMBO_RX_RING_SZ,
 832                                     &sc->bge_cdata.bge_rx_jumbo_ring_tag,
 833                                     &sc->bge_cdata.bge_rx_jumbo_ring_map,
 834                                     (void *)&sc->bge_ldata.bge_rx_jumbo_ring,
 835                                     &sc->bge_ldata.bge_rx_jumbo_ring_paddr);
 836         if (error) {
 837                 if_printf(ifp, "could not create jumbo RX ring\n");
 838                 return error;
 839         }
 840
 841         /*
 842          * Create DMA stuffs for jumbo buffer block.
 843          */
 844         error = bge_dma_block_alloc(sc, BGE_JMEM,
 845                                     &sc->bge_cdata.bge_jumbo_tag,
 846                                     &sc->bge_cdata.bge_jumbo_map,
 847                                     (void **)&sc->bge_ldata.bge_jumbo_buf,
 848                                     &paddr);
 849         if (error) {
 850                 if_printf(ifp, "could not create jumbo buffer\n");
 851                 return error;
 852         }
 853
 854         SLIST_INIT(&sc->bge_jfree_listhead);
 855
 856         /*
 857          * Now divide it up into 9K pieces and save the addresses
 858          * in an array. Note that we play an evil trick here by using
 859          * the first few bytes in the buffer to hold the the address
 860          * of the softc structure for this interface. This is because
 861          * bge_jfree() needs it, but it is called by the mbuf management
 862          * code which will not pass it to us explicitly.
 863          */
 864         for (i = 0, ptr = sc->bge_ldata.bge_jumbo_buf; i < BGE_JSLOTS; i++) {
 865                 entry = &sc->bge_cdata.bge_jslots[i];
 866                 entry->bge_sc = sc;
 867                 entry->bge_buf = ptr;
 868                 entry->bge_paddr = paddr;
 869                 entry->bge_inuse = 0;
 870                 entry->bge_slot = i;
 871                 SLIST_INSERT_HEAD(&sc->bge_jfree_listhead, entry, jslot_link);
 872
 873                 ptr += BGE_JLEN;
 874                 paddr += BGE_JLEN;
 875         }
 876         return 0;
 877 }
 878
 879 static void
 880 bge_free_jumbo_mem(struct bge_softc *sc)
 881 {
 882         /* Destroy jumbo RX ring. */
 883         bge_dma_block_free(sc->bge_cdata.bge_rx_jumbo_ring_tag,
 884                            sc->bge_cdata.bge_rx_jumbo_ring_map,
 885                            sc->bge_ldata.bge_rx_jumbo_ring);
 886
 887         /* Destroy jumbo buffer block. */
 888         bge_dma_block_free(sc->bge_cdata.bge_jumbo_tag,
 889                            sc->bge_cdata.bge_jumbo_map,
 890                            sc->bge_ldata.bge_jumbo_buf);
 891 }
 892
 893 /*
 894  * Allocate a jumbo buffer.
 895  */
 896 static struct bge_jslot *
 897 bge_jalloc(struct bge_softc *sc)
 898 {
 899         struct bge_jslot *entry;
 900
 901         lwkt_serialize_enter(&sc->bge_jslot_serializer);
 902         entry = SLIST_FIRST(&sc->bge_jfree_listhead);
 903         if (entry) {
 904                 SLIST_REMOVE_HEAD(&sc->bge_jfree_listhead, jslot_link);
 905                 entry->bge_inuse = 1;
 906         } else {
 907                 if_printf(&sc->arpcom.ac_if, "no free jumbo buffers\n");
 908         }
 909         lwkt_serialize_exit(&sc->bge_jslot_serializer);
 910         return(entry);
 911 }
 912
 913 /*
 914  * Adjust usage count on a jumbo buffer.
 915  */
 916 static void
 917 bge_jref(void *arg)
 918 {
 919         struct bge_jslot *entry = (struct bge_jslot *)arg;
 920         struct bge_softc *sc = entry->bge_sc;
 921
 922         if (sc == NULL)
 923                 panic("bge_jref: can't find softc pointer!");
 924
 925         if (&sc->bge_cdata.bge_jslots[entry->bge_slot] != entry) {
 926                 panic("bge_jref: asked to reference buffer "
 927                     "that we don't manage!");
 928         } else if (entry->bge_inuse == 0) {
 929                 panic("bge_jref: buffer already free!");
 930         } else {
 931                 atomic_add_int(&entry->bge_inuse, 1);
 932         }
 933 }
 934
 935 /*
 936  * Release a jumbo buffer.
 937  */
 938 static void
 939 bge_jfree(void *arg)
 940 {
 941         struct bge_jslot *entry = (struct bge_jslot *)arg;
 942         struct bge_softc *sc = entry->bge_sc;
 943
 944         if (sc == NULL)
 945                 panic("bge_jfree: can't find softc pointer!");
 946
 947         if (&sc->bge_cdata.bge_jslots[entry->bge_slot] != entry) {
 948                 panic("bge_jfree: asked to free buffer that we don't manage!");
 949         } else if (entry->bge_inuse == 0) {
 950                 panic("bge_jfree: buffer already free!");
 951         } else {
 952                 /*
 953                  * Possible MP race to 0, use the serializer.  The atomic insn
 954                  * is still needed for races against bge_jref().
 955                  */
 956                 lwkt_serialize_enter(&sc->bge_jslot_serializer);
 957                 atomic_subtract_int(&entry->bge_inuse, 1);
 958                 if (entry->bge_inuse == 0) {
 959                         SLIST_INSERT_HEAD(&sc->bge_jfree_listhead,
 960                                           entry, jslot_link);
 961                 }
 962                 lwkt_serialize_exit(&sc->bge_jslot_serializer);
 963         }
 964 }
 965
 966
 967 /*
 968  * Intialize a standard receive ring descriptor.
 969  */
 970 static int
 971 bge_newbuf_std(struct bge_softc *sc, int i, int init)
 972 {
 973         struct mbuf *m_new = NULL;
 974         bus_dma_segment_t seg;
 975         bus_dmamap_t map;
 976         int error, nsegs;
 977
 978         m_new = m_getcl(init ? MB_WAIT : MB_DONTWAIT, MT_DATA, M_PKTHDR);
 979         if (m_new == NULL)
 980                 return ENOBUFS;
 981         m_new->m_len = m_new->m_pkthdr.len = MCLBYTES;
 982
 983         if ((sc->bge_flags & BGE_FLAG_RX_ALIGNBUG) == 0)
 984                 m_adj(m_new, ETHER_ALIGN);
 985
 986         error = bus_dmamap_load_mbuf_segment(sc->bge_cdata.bge_rx_mtag,
 987                         sc->bge_cdata.bge_rx_tmpmap, m_new,
 988                         &seg, 1, &nsegs, BUS_DMA_NOWAIT);
 989         if (error) {
 990                 m_freem(m_new);
 991                 return error;
 992         }
 993
 994         if (!init) {
 995                 bus_dmamap_sync(sc->bge_cdata.bge_rx_mtag,
 996                                 sc->bge_cdata.bge_rx_std_dmamap[i],
 997                                 BUS_DMASYNC_POSTREAD);
 998                 bus_dmamap_unload(sc->bge_cdata.bge_rx_mtag,
 999                         sc->bge_cdata.bge_rx_std_dmamap[i]);
1000         }
1001
1002         map = sc->bge_cdata.bge_rx_tmpmap;
1003         sc->bge_cdata.bge_rx_tmpmap = sc->bge_cdata.bge_rx_std_dmamap[i];
1004         sc->bge_cdata.bge_rx_std_dmamap[i] = map;
1005
1006         sc->bge_cdata.bge_rx_std_chain[i].bge_mbuf = m_new;
1007         sc->bge_cdata.bge_rx_std_chain[i].bge_paddr = seg.ds_addr;
1008
1009         bge_setup_rxdesc_std(sc, i);
1010         return 0;
1011 }
1012
1013 static void
1014 bge_setup_rxdesc_std(struct bge_softc *sc, int i)
1015 {
1016         struct bge_rxchain *rc;
1017         struct bge_rx_bd *r;
1018
1019         rc = &sc->bge_cdata.bge_rx_std_chain[i];
1020         r = &sc->bge_ldata.bge_rx_std_ring[i];
1021
1022         r->bge_addr.bge_addr_lo = BGE_ADDR_LO(rc->bge_paddr);
1023         r->bge_addr.bge_addr_hi = BGE_ADDR_HI(rc->bge_paddr);
1024         r->bge_len = rc->bge_mbuf->m_len;
1025         r->bge_idx = i;
1026         r->bge_flags = BGE_RXBDFLAG_END;
1027 }
1028
1029 /*
1030  * Initialize a jumbo receive ring descriptor. This allocates
1031  * a jumbo buffer from the pool managed internally by the driver.
1032  */
1033 static int
1034 bge_newbuf_jumbo(struct bge_softc *sc, int i, int init)
1035 {
1036         struct mbuf *m_new = NULL;
1037         struct bge_jslot *buf;
1038         bus_addr_t paddr;
1039
1040         /* Allocate the mbuf. */
1041         MGETHDR(m_new, init ? MB_WAIT : MB_DONTWAIT, MT_DATA);
1042         if (m_new == NULL)
1043                 return ENOBUFS;
1044
1045         /* Allocate the jumbo buffer */
1046         buf = bge_jalloc(sc);
1047         if (buf == NULL) {
1048                 m_freem(m_new);
1049                 return ENOBUFS;
1050         }
1051
1052         /* Attach the buffer to the mbuf. */
1053         m_new->m_ext.ext_arg = buf;
1054         m_new->m_ext.ext_buf = buf->bge_buf;
1055         m_new->m_ext.ext_free = bge_jfree;
1056         m_new->m_ext.ext_ref = bge_jref;
1057         m_new->m_ext.ext_size = BGE_JUMBO_FRAMELEN;
1058
1059         m_new->m_flags |= M_EXT;
1060
1061         m_new->m_data = m_new->m_ext.ext_buf;
1062         m_new->m_len = m_new->m_pkthdr.len = m_new->m_ext.ext_size;
1063
1064         paddr = buf->bge_paddr;
1065         if ((sc->bge_flags & BGE_FLAG_RX_ALIGNBUG) == 0) {
1066                 m_adj(m_new, ETHER_ALIGN);
1067                 paddr += ETHER_ALIGN;
1068         }
1069
1070         /* Save necessary information */
1071         sc->bge_cdata.bge_rx_jumbo_chain[i].bge_mbuf = m_new;
1072         sc->bge_cdata.bge_rx_jumbo_chain[i].bge_paddr = paddr;
1073
1074         /* Set up the descriptor. */
1075         bge_setup_rxdesc_jumbo(sc, i);
1076         return 0;
1077 }
1078
1079 static void
1080 bge_setup_rxdesc_jumbo(struct bge_softc *sc, int i)
1081 {
1082         struct bge_rx_bd *r;
1083         struct bge_rxchain *rc;
1084
1085         r = &sc->bge_ldata.bge_rx_jumbo_ring[i];
1086         rc = &sc->bge_cdata.bge_rx_jumbo_chain[i];
1087
1088         r->bge_addr.bge_addr_lo = BGE_ADDR_LO(rc->bge_paddr);
1089         r->bge_addr.bge_addr_hi = BGE_ADDR_HI(rc->bge_paddr);
1090         r->bge_len = rc->bge_mbuf->m_len;
1091         r->bge_idx = i;
1092         r->bge_flags = BGE_RXBDFLAG_END|BGE_RXBDFLAG_JUMBO_RING;
1093 }
1094
1095 static int
1096 bge_init_rx_ring_std(struct bge_softc *sc)
1097 {
1098         int i, error;
1099
1100         for (i = 0; i < BGE_STD_RX_RING_CNT; i++) {
1101                 error = bge_newbuf_std(sc, i, 1);
1102                 if (error)
1103                         return error;
1104         };
1105
1106         sc->bge_std = BGE_STD_RX_RING_CNT - 1;
1107         bge_writembx(sc, BGE_MBX_RX_STD_PROD_LO, sc->bge_std);
1108
1109         return(0);
1110 }
1111
1112 static void
1113 bge_free_rx_ring_std(struct bge_softc *sc)
1114 {
1115         int i;
1116
1117         for (i = 0; i < BGE_STD_RX_RING_CNT; i++) {
1118                 struct bge_rxchain *rc = &sc->bge_cdata.bge_rx_std_chain[i];
1119
1120                 if (rc->bge_mbuf != NULL) {
1121                         bus_dmamap_unload(sc->bge_cdata.bge_rx_mtag,
1122                                           sc->bge_cdata.bge_rx_std_dmamap[i]);
1123                         m_freem(rc->bge_mbuf);
1124                         rc->bge_mbuf = NULL;
1125                 }
1126                 bzero(&sc->bge_ldata.bge_rx_std_ring[i],
1127                     sizeof(struct bge_rx_bd));
1128         }
1129 }
1130
1131 static int
1132 bge_init_rx_ring_jumbo(struct bge_softc *sc)
1133 {
1134         struct bge_rcb *rcb;
1135         int i, error;
1136
1137         for (i = 0; i < BGE_JUMBO_RX_RING_CNT; i++) {
1138                 error = bge_newbuf_jumbo(sc, i, 1);
1139                 if (error)
1140                         return error;
1141         };
1142
1143         sc->bge_jumbo = BGE_JUMBO_RX_RING_CNT - 1;
1144
1145         rcb = &sc->bge_ldata.bge_info.bge_jumbo_rx_rcb;
1146         rcb->bge_maxlen_flags = BGE_RCB_MAXLEN_FLAGS(0, 0);
1147         CSR_WRITE_4(sc, BGE_RX_JUMBO_RCB_MAXLEN_FLAGS, rcb->bge_maxlen_flags);
1148
1149         bge_writembx(sc, BGE_MBX_RX_JUMBO_PROD_LO, sc->bge_jumbo);
1150
1151         return(0);
1152 }
1153
1154 static void
1155 bge_free_rx_ring_jumbo(struct bge_softc *sc)
1156 {
1157         int i;
1158
1159         for (i = 0; i < BGE_JUMBO_RX_RING_CNT; i++) {
1160                 struct bge_rxchain *rc = &sc->bge_cdata.bge_rx_jumbo_chain[i];
1161
1162                 if (rc->bge_mbuf != NULL) {
1163                         m_freem(rc->bge_mbuf);
1164                         rc->bge_mbuf = NULL;
1165                 }
1166                 bzero(&sc->bge_ldata.bge_rx_jumbo_ring[i],
1167                     sizeof(struct bge_rx_bd));
1168         }
1169 }
1170
1171 static void
1172 bge_free_tx_ring(struct bge_softc *sc)
1173 {
1174         int i;
1175
1176         for (i = 0; i < BGE_TX_RING_CNT; i++) {
1177                 if (sc->bge_cdata.bge_tx_chain[i] != NULL) {
1178                         bus_dmamap_unload(sc->bge_cdata.bge_tx_mtag,
1179                                           sc->bge_cdata.bge_tx_dmamap[i]);
1180                         m_freem(sc->bge_cdata.bge_tx_chain[i]);
1181                         sc->bge_cdata.bge_tx_chain[i] = NULL;
1182                 }
1183                 bzero(&sc->bge_ldata.bge_tx_ring[i],
1184                     sizeof(struct bge_tx_bd));
1185         }
1186 }
1187
1188 static int
1189 bge_init_tx_ring(struct bge_softc *sc)
1190 {
1191         sc->bge_txcnt = 0;
1192         sc->bge_tx_saved_considx = 0;
1193         sc->bge_tx_prodidx = 0;
1194
1195         /* Initialize transmit producer index for host-memory send ring. */
1196         bge_writembx(sc, BGE_MBX_TX_HOST_PROD0_LO, sc->bge_tx_prodidx);
1197
1198         /* 5700 b2 errata */
1199         if (sc->bge_chiprev == BGE_CHIPREV_5700_BX)
1200                 bge_writembx(sc, BGE_MBX_TX_HOST_PROD0_LO, sc->bge_tx_prodidx);
1201
1202         bge_writembx(sc, BGE_MBX_TX_NIC_PROD0_LO, 0);
1203         /* 5700 b2 errata */
1204         if (sc->bge_chiprev == BGE_CHIPREV_5700_BX)
1205                 bge_writembx(sc, BGE_MBX_TX_NIC_PROD0_LO, 0);
1206
1207         return(0);
1208 }
1209
1210 static void
1211 bge_setmulti(struct bge_softc *sc)
1212 {
1213         struct ifnet *ifp;
1214         struct ifmultiaddr *ifma;
1215         uint32_t hashes[4] = { 0, 0, 0, 0 };
1216         int h, i;
1217
1218         ifp = &sc->arpcom.ac_if;
1219
1220         if (ifp->if_flags & IFF_ALLMULTI || ifp->if_flags & IFF_PROMISC) {
1221                 for (i = 0; i < 4; i++)
1222                         CSR_WRITE_4(sc, BGE_MAR0 + (i * 4), 0xFFFFFFFF);
1223                 return;
1224         }
1225
1226         /* First, zot all the existing filters. */
1227         for (i = 0; i < 4; i++)
1228                 CSR_WRITE_4(sc, BGE_MAR0 + (i * 4), 0);
1229
1230         /* Now program new ones. */
1231         TAILQ_FOREACH(ifma, &ifp->if_multiaddrs, ifma_link) {
1232                 if (ifma->ifma_addr->sa_family != AF_LINK)
1233                         continue;
1234                 h = ether_crc32_le(
1235                     LLADDR((struct sockaddr_dl *)ifma->ifma_addr),
1236                     ETHER_ADDR_LEN) & 0x7f;
1237                 hashes[(h & 0x60) >> 5] |= 1 << (h & 0x1F);
1238         }
1239
1240         for (i = 0; i < 4; i++)
1241                 CSR_WRITE_4(sc, BGE_MAR0 + (i * 4), hashes[i]);
1242 }
1243
1244 /*
1245  * Do endian, PCI and DMA initialization. Also check the on-board ROM
1246  * self-test results.
1247  */
1248 static int
1249 bge_chipinit(struct bge_softc *sc)
1250 {
1251         int i;
1252         uint32_t dma_rw_ctl;
1253         uint16_t val;
1254
1255         /* Set endian type before we access any non-PCI registers. */
1256         pci_write_config(sc->bge_dev, BGE_PCI_MISC_CTL,
1257             BGE_INIT | sc->bge_pci_miscctl, 4);
1258
1259         /* Clear the MAC control register */
1260         CSR_WRITE_4(sc, BGE_MAC_MODE, 0);
1261
1262         /*
1263          * Clear the MAC statistics block in the NIC's
1264          * internal memory.
1265          */
1266         for (i = BGE_STATS_BLOCK;
1267             i < BGE_STATS_BLOCK_END + 1; i += sizeof(uint32_t))
1268                 BGE_MEMWIN_WRITE(sc, i, 0);
1269
1270         for (i = BGE_STATUS_BLOCK;
1271             i < BGE_STATUS_BLOCK_END + 1; i += sizeof(uint32_t))
1272                 BGE_MEMWIN_WRITE(sc, i, 0);
1273
1274         if (sc->bge_chiprev == BGE_CHIPREV_5704_BX) {
1275                 /*
1276                  * Fix data corruption caused by non-qword write with WB.
1277                  * Fix master abort in PCI mode.
1278                  * Fix PCI latency timer.
1279                  */
1280                 val = pci_read_config(sc->bge_dev, BGE_PCI_MSI_DATA + 2, 2);
1281                 val |= (1 << 10) | (1 << 12) | (1 << 13);
1282                 pci_write_config(sc->bge_dev, BGE_PCI_MSI_DATA + 2, val, 2);
1283         }
1284
1285         /* Set up the PCI DMA control register. */
1286         dma_rw_ctl = BGE_PCI_READ_CMD | BGE_PCI_WRITE_CMD;
1287         if (sc->bge_flags & BGE_FLAG_PCIE) {
1288                 /* PCI-E bus */
1289                 /* DMA read watermark not used on PCI-E */
1290                 dma_rw_ctl |= (0x3 << BGE_PCIDMARWCTL_WR_WAT_SHIFT);
1291         } else if (sc->bge_flags & BGE_FLAG_PCIX) {
1292                 /* PCI-X bus */
1293                 if (sc->bge_asicrev == BGE_ASICREV_BCM5780) {
1294                         dma_rw_ctl |= (0x4 << BGE_PCIDMARWCTL_RD_WAT_SHIFT) |
1295                             (0x2 << BGE_PCIDMARWCTL_WR_WAT_SHIFT);
1296                         dma_rw_ctl |= BGE_PCIDMARWCTL_ONEDMA_ATONCE_GLOBAL;
1297                 } else if (sc->bge_asicrev == BGE_ASICREV_BCM5714) {
1298                         dma_rw_ctl |= (0x4 << BGE_PCIDMARWCTL_RD_WAT_SHIFT) |
1299                             (0x2 << BGE_PCIDMARWCTL_WR_WAT_SHIFT);
1300                         dma_rw_ctl |= BGE_PCIDMARWCTL_ONEDMA_ATONCE_LOCAL;
1301                 } else if (sc->bge_asicrev == BGE_ASICREV_BCM5703 ||
1302                     sc->bge_asicrev == BGE_ASICREV_BCM5704) {
1303                         uint32_t rd_wat = 0x7;
1304                         uint32_t clkctl;
1305
1306                         clkctl = CSR_READ_4(sc, BGE_PCI_CLKCTL) & 0x1f;
1307                         if ((sc->bge_flags & BGE_FLAG_MAXADDR_40BIT) &&
1308                             sc->bge_asicrev == BGE_ASICREV_BCM5704) {
1309                                 dma_rw_ctl |=
1310                                     BGE_PCIDMARWCTL_ONEDMA_ATONCE_LOCAL;
1311                         } else if (clkctl == 0x6 || clkctl == 0x7) {
1312                                 dma_rw_ctl |=
1313                                     BGE_PCIDMARWCTL_ONEDMA_ATONCE_GLOBAL;
1314                         }
1315                         if (sc->bge_asicrev == BGE_ASICREV_BCM5703)
1316                                 rd_wat = 0x4;
1317
1318                         dma_rw_ctl |= (rd_wat << BGE_PCIDMARWCTL_RD_WAT_SHIFT) |
1319                             (3 << BGE_PCIDMARWCTL_WR_WAT_SHIFT);
1320                         dma_rw_ctl |= BGE_PCIDMARWCTL_ASRT_ALL_BE;
1321                 } else {
1322                         dma_rw_ctl |= (0x3 << BGE_PCIDMARWCTL_RD_WAT_SHIFT) |
1323                             (0x3 << BGE_PCIDMARWCTL_WR_WAT_SHIFT);
1324                         dma_rw_ctl |= 0xf;
1325                 }
1326         } else {
1327                 /* Conventional PCI bus */
1328                 dma_rw_ctl |= (0x7 << BGE_PCIDMARWCTL_RD_WAT_SHIFT) |
1329                     (0x7 << BGE_PCIDMARWCTL_WR_WAT_SHIFT);
1330                 if (sc->bge_asicrev != BGE_ASICREV_BCM5705 &&
1331                     sc->bge_asicrev != BGE_ASICREV_BCM5750)
1332                         dma_rw_ctl |= 0xf;
1333         }
1334
1335         if (sc->bge_asicrev == BGE_ASICREV_BCM5703 ||
1336             sc->bge_asicrev == BGE_ASICREV_BCM5704) {
1337                 dma_rw_ctl &= ~BGE_PCIDMARWCTL_MINDMA;
1338         } else if (sc->bge_asicrev == BGE_ASICREV_BCM5700 ||
1339             sc->bge_asicrev == BGE_ASICREV_BCM5701) {
1340                 dma_rw_ctl |= BGE_PCIDMARWCTL_USE_MRM |
1341                     BGE_PCIDMARWCTL_ASRT_ALL_BE;
1342         }
1343         pci_write_config(sc->bge_dev, BGE_PCI_DMA_RW_CTL, dma_rw_ctl, 4);
1344
1345         /*
1346          * Set up general mode register.
1347          */
1348         CSR_WRITE_4(sc, BGE_MODE_CTL, BGE_DMA_SWAP_OPTIONS|
1349             BGE_MODECTL_MAC_ATTN_INTR|BGE_MODECTL_HOST_SEND_BDS|
1350             BGE_MODECTL_TX_NO_PHDR_CSUM);
1351
1352         /*
1353          * BCM5701 B5 have a bug causing data corruption when using
1354          * 64-bit DMA reads, which can be terminated early and then
1355          * completed later as 32-bit accesses, in combination with
1356          * certain bridges.
1357          */
1358         if (sc->bge_asicrev == BGE_ASICREV_BCM5701 &&
1359             sc->bge_chipid == BGE_CHIPID_BCM5701_B5)
1360                 BGE_SETBIT(sc, BGE_MODE_CTL, BGE_MODECTL_FORCE_PCI32);
1361
1362         /*
1363          * Disable memory write invalidate.  Apparently it is not supported
1364          * properly by these devices.  Also ensure that INTx isn't disabled,
1365          * as these chips need it even when using MSI.
1366          */
1367         PCI_CLRBIT(sc->bge_dev, BGE_PCI_CMD,
1368             (PCIM_CMD_MWRICEN | PCIM_CMD_INTxDIS), 4);
1369
1370         /* Set the timer prescaler (always 66Mhz) */
1371         CSR_WRITE_4(sc, BGE_MISC_CFG, 65 << 1/*BGE_32BITTIME_66MHZ*/);
1372
1373         if (sc->bge_asicrev == BGE_ASICREV_BCM5906) {
1374                 DELAY(40);      /* XXX */
1375
1376                 /* Put PHY into ready state */
1377                 BGE_CLRBIT(sc, BGE_MISC_CFG, BGE_MISCCFG_EPHY_IDDQ);
1378                 CSR_READ_4(sc, BGE_MISC_CFG); /* Flush */
1379                 DELAY(40);
1380         }
1381
1382         return(0);
1383 }
1384
1385 static int
1386 bge_blockinit(struct bge_softc *sc)
1387 {
1388         struct bge_rcb *rcb;
1389         bus_size_t vrcb;
1390         bge_hostaddr taddr;
1391         uint32_t val;
1392         int i, limit;
1393
1394         /*
1395          * Initialize the memory window pointer register so that
1396          * we can access the first 32K of internal NIC RAM. This will
1397          * allow us to set up the TX send ring RCBs and the RX return
1398          * ring RCBs, plus other things which live in NIC memory.
1399          */
1400         CSR_WRITE_4(sc, BGE_PCI_MEMWIN_BASEADDR, 0);
1401
1402         /* Note: the BCM5704 has a smaller mbuf space than other chips. */
1403
1404         if (!BGE_IS_5705_PLUS(sc)) {
1405                 /* Configure mbuf memory pool */
1406                 CSR_WRITE_4(sc, BGE_BMAN_MBUFPOOL_BASEADDR, BGE_BUFFPOOL_1);
1407                 if (sc->bge_asicrev == BGE_ASICREV_BCM5704)
1408                         CSR_WRITE_4(sc, BGE_BMAN_MBUFPOOL_LEN, 0x10000);
1409                 else
1410                         CSR_WRITE_4(sc, BGE_BMAN_MBUFPOOL_LEN, 0x18000);
1411
1412                 /* Configure DMA resource pool */
1413                 CSR_WRITE_4(sc, BGE_BMAN_DMA_DESCPOOL_BASEADDR,
1414                     BGE_DMA_DESCRIPTORS);
1415                 CSR_WRITE_4(sc, BGE_BMAN_DMA_DESCPOOL_LEN, 0x2000);
1416         }
1417
1418         /* Configure mbuf pool watermarks */
1419         if (!BGE_IS_5705_PLUS(sc)) {
1420                 CSR_WRITE_4(sc, BGE_BMAN_MBUFPOOL_READDMA_LOWAT, 0x50);
1421                 CSR_WRITE_4(sc, BGE_BMAN_MBUFPOOL_MACRX_LOWAT, 0x20);
1422                 CSR_WRITE_4(sc, BGE_BMAN_MBUFPOOL_HIWAT, 0x60);
1423         } else if (sc->bge_asicrev == BGE_ASICREV_BCM5906) {
1424                 CSR_WRITE_4(sc, BGE_BMAN_MBUFPOOL_READDMA_LOWAT, 0x0);
1425                 CSR_WRITE_4(sc, BGE_BMAN_MBUFPOOL_MACRX_LOWAT, 0x04);
1426                 CSR_WRITE_4(sc, BGE_BMAN_MBUFPOOL_HIWAT, 0x10);
1427         } else {
1428                 CSR_WRITE_4(sc, BGE_BMAN_MBUFPOOL_READDMA_LOWAT, 0x0);
1429                 CSR_WRITE_4(sc, BGE_BMAN_MBUFPOOL_MACRX_LOWAT, 0x10);
1430                 CSR_WRITE_4(sc, BGE_BMAN_MBUFPOOL_HIWAT, 0x60);
1431         }
1432
1433         /* Configure DMA resource watermarks */
1434         CSR_WRITE_4(sc, BGE_BMAN_DMA_DESCPOOL_LOWAT, 5);
1435         CSR_WRITE_4(sc, BGE_BMAN_DMA_DESCPOOL_HIWAT, 10);
1436
1437         /* Enable buffer manager */
1438         CSR_WRITE_4(sc, BGE_BMAN_MODE,
1439             BGE_BMANMODE_ENABLE|BGE_BMANMODE_LOMBUF_ATTN);
1440
1441         /* Poll for buffer manager start indication */
1442         for (i = 0; i < BGE_TIMEOUT; i++) {
1443                 if (CSR_READ_4(sc, BGE_BMAN_MODE) & BGE_BMANMODE_ENABLE)
1444                         break;
1445                 DELAY(10);
1446         }
1447
1448         if (i == BGE_TIMEOUT) {
1449                 if_printf(&sc->arpcom.ac_if,
1450                           "buffer manager failed to start\n");
1451                 return(ENXIO);
1452         }
1453
1454         /* Enable flow-through queues */
1455         CSR_WRITE_4(sc, BGE_FTQ_RESET, 0xFFFFFFFF);
1456         CSR_WRITE_4(sc, BGE_FTQ_RESET, 0);
1457
1458         /* Wait until queue initialization is complete */
1459         for (i = 0; i < BGE_TIMEOUT; i++) {
1460                 if (CSR_READ_4(sc, BGE_FTQ_RESET) == 0)
1461                         break;
1462                 DELAY(10);
1463         }
1464
1465         if (i == BGE_TIMEOUT) {
1466                 if_printf(&sc->arpcom.ac_if,
1467                           "flow-through queue init failed\n");
1468                 return(ENXIO);
1469         }
1470
1471         /*
1472          * Summary of rings supported by the controller:
1473          *
1474          * Standard Receive Producer Ring
1475          * - This ring is used to feed receive buffers for "standard"
1476          *   sized frames (typically 1536 bytes) to the controller.
1477          *
1478          * Jumbo Receive Producer Ring
1479          * - This ring is used to feed receive buffers for jumbo sized
1480          *   frames (i.e. anything bigger than the "standard" frames)
1481          *   to the controller.
1482          *
1483          * Mini Receive Producer Ring
1484          * - This ring is used to feed receive buffers for "mini"
1485          *   sized frames to the controller.
1486          * - This feature required external memory for the controller
1487          *   but was never used in a production system.  Should always
1488          *   be disabled.
1489          *
1490          * Receive Return Ring
1491          * - After the controller has placed an incoming frame into a
1492          *   receive buffer that buffer is moved into a receive return
1493          *   ring.  The driver is then responsible to passing the
1494          *   buffer up to the stack.  Many versions of the controller
1495          *   support multiple RR rings.
1496          *
1497          * Send Ring
1498          * - This ring is used for outgoing frames.  Many versions of
1499          *   the controller support multiple send rings.
1500          */
1501
1502         /* Initialize the standard receive producer ring control block. */
1503         rcb = &sc->bge_ldata.bge_info.bge_std_rx_rcb;
1504         rcb->bge_hostaddr.bge_addr_lo =
1505             BGE_ADDR_LO(sc->bge_ldata.bge_rx_std_ring_paddr);
1506         rcb->bge_hostaddr.bge_addr_hi =
1507             BGE_ADDR_HI(sc->bge_ldata.bge_rx_std_ring_paddr);
1508         if (BGE_IS_5705_PLUS(sc)) {
1509                 /*
1510                  * Bits 31-16: Programmable ring size (512, 256, 128, 64, 32)
1511                  * Bits 15-2 : Reserved (should be 0)
1512                  * Bit 1     : 1 = Ring Disabled, 0 = Ring Enabled
1513                  * Bit 0     : Reserved
1514                  */
1515                 rcb->bge_maxlen_flags = BGE_RCB_MAXLEN_FLAGS(512, 0);
1516         } else {
1517                 /*
1518                  * Ring size is always XXX entries
1519                  * Bits 31-16: Maximum RX frame size
1520                  * Bits 15-2 : Reserved (should be 0)
1521                  * Bit 1     : 1 = Ring Disabled, 0 = Ring Enabled
1522                  * Bit 0     : Reserved
1523                  */
1524                 rcb->bge_maxlen_flags =
1525                     BGE_RCB_MAXLEN_FLAGS(BGE_MAX_FRAMELEN, 0);
1526         }
1527         rcb->bge_nicaddr = BGE_STD_RX_RINGS;
1528         /* Write the standard receive producer ring control block. */
1529         CSR_WRITE_4(sc, BGE_RX_STD_RCB_HADDR_HI, rcb->bge_hostaddr.bge_addr_hi);
1530         CSR_WRITE_4(sc, BGE_RX_STD_RCB_HADDR_LO, rcb->bge_hostaddr.bge_addr_lo);
1531         CSR_WRITE_4(sc, BGE_RX_STD_RCB_MAXLEN_FLAGS, rcb->bge_maxlen_flags);
1532         CSR_WRITE_4(sc, BGE_RX_STD_RCB_NICADDR, rcb->bge_nicaddr);
1533         /* Reset the standard receive producer ring producer index. */
1534         bge_writembx(sc, BGE_MBX_RX_STD_PROD_LO, 0);
1535
1536         /*
1537          * Initialize the jumbo RX producer ring control
1538          * block.  We set the 'ring disabled' bit in the
1539          * flags field until we're actually ready to start
1540          * using this ring (i.e. once we set the MTU
1541          * high enough to require it).
1542          */
1543         if (BGE_IS_JUMBO_CAPABLE(sc)) {
1544                 rcb = &sc->bge_ldata.bge_info.bge_jumbo_rx_rcb;
1545                 /* Get the jumbo receive producer ring RCB parameters. */
1546                 rcb->bge_hostaddr.bge_addr_lo =
1547                     BGE_ADDR_LO(sc->bge_ldata.bge_rx_jumbo_ring_paddr);
1548                 rcb->bge_hostaddr.bge_addr_hi =
1549                     BGE_ADDR_HI(sc->bge_ldata.bge_rx_jumbo_ring_paddr);
1550                 rcb->bge_maxlen_flags =
1551                     BGE_RCB_MAXLEN_FLAGS(BGE_MAX_FRAMELEN,
1552                     BGE_RCB_FLAG_RING_DISABLED);
1553                 rcb->bge_nicaddr = BGE_JUMBO_RX_RINGS;
1554                 CSR_WRITE_4(sc, BGE_RX_JUMBO_RCB_HADDR_HI,
1555                     rcb->bge_hostaddr.bge_addr_hi);
1556                 CSR_WRITE_4(sc, BGE_RX_JUMBO_RCB_HADDR_LO,
1557                     rcb->bge_hostaddr.bge_addr_lo);
1558                 /* Program the jumbo receive producer ring RCB parameters. */
1559                 CSR_WRITE_4(sc, BGE_RX_JUMBO_RCB_MAXLEN_FLAGS,
1560                     rcb->bge_maxlen_flags);
1561                 CSR_WRITE_4(sc, BGE_RX_JUMBO_RCB_NICADDR, rcb->bge_nicaddr);
1562                 /* Reset the jumbo receive producer ring producer index. */
1563                 bge_writembx(sc, BGE_MBX_RX_JUMBO_PROD_LO, 0);
1564         }
1565
1566         /* Disable the mini receive producer ring RCB. */
1567         if (BGE_IS_5700_FAMILY(sc)) {
1568                 rcb = &sc->bge_ldata.bge_info.bge_mini_rx_rcb;
1569                 rcb->bge_maxlen_flags =
1570                     BGE_RCB_MAXLEN_FLAGS(0, BGE_RCB_FLAG_RING_DISABLED);
1571                 CSR_WRITE_4(sc, BGE_RX_MINI_RCB_MAXLEN_FLAGS,
1572                     rcb->bge_maxlen_flags);
1573                 /* Reset the mini receive producer ring producer index. */
1574                 bge_writembx(sc, BGE_MBX_RX_MINI_PROD_LO, 0);
1575         }
1576
1577         /* Choose de-pipeline mode for BCM5906 A0, A1 and A2. */
1578         if (sc->bge_asicrev == BGE_ASICREV_BCM5906 &&
1579             (sc->bge_chipid == BGE_CHIPID_BCM5906_A0 ||
1580              sc->bge_chipid == BGE_CHIPID_BCM5906_A1 ||
1581              sc->bge_chipid == BGE_CHIPID_BCM5906_A2)) {
1582                 CSR_WRITE_4(sc, BGE_ISO_PKT_TX,
1583                     (CSR_READ_4(sc, BGE_ISO_PKT_TX) & ~3) | 2);
1584         }
1585
1586         /*
1587          * The BD ring replenish thresholds control how often the
1588          * hardware fetches new BD's from the producer rings in host
1589          * memory.  Setting the value too low on a busy system can
1590          * starve the hardware and recue the throughpout.
1591          *
1592          * Set the BD ring replentish thresholds. The recommended
1593          * values are 1/8th the number of descriptors allocated to
1594          * each ring.
1595          */
1596         if (BGE_IS_5705_PLUS(sc))
1597                 val = 8;
1598         else
1599                 val = BGE_STD_RX_RING_CNT / 8;
1600         CSR_WRITE_4(sc, BGE_RBDI_STD_REPL_THRESH, val);
1601         if (BGE_IS_JUMBO_CAPABLE(sc)) {
1602                 CSR_WRITE_4(sc, BGE_RBDI_JUMBO_REPL_THRESH,
1603                     BGE_JUMBO_RX_RING_CNT/8);
1604         }
1605
1606         /*
1607          * Disable all send rings by setting the 'ring disabled' bit
1608          * in the flags field of all the TX send ring control blocks,
1609          * located in NIC memory.
1610          */
1611         if (!BGE_IS_5705_PLUS(sc)) {
1612                 /* 5700 to 5704 had 16 send rings. */
1613                 limit = BGE_TX_RINGS_EXTSSRAM_MAX;
1614         } else {
1615                 limit = 1;
1616         }
1617         vrcb = BGE_MEMWIN_START + BGE_SEND_RING_RCB;
1618         for (i = 0; i < limit; i++) {
1619                 RCB_WRITE_4(sc, vrcb, bge_maxlen_flags,
1620                     BGE_RCB_MAXLEN_FLAGS(0, BGE_RCB_FLAG_RING_DISABLED));
1621                 RCB_WRITE_4(sc, vrcb, bge_nicaddr, 0);
1622                 vrcb += sizeof(struct bge_rcb);
1623         }
1624
1625         /* Configure send ring RCB 0 (we use only the first ring) */
1626         vrcb = BGE_MEMWIN_START + BGE_SEND_RING_RCB;
1627         BGE_HOSTADDR(taddr, sc->bge_ldata.bge_tx_ring_paddr);
1628         RCB_WRITE_4(sc, vrcb, bge_hostaddr.bge_addr_hi, taddr.bge_addr_hi);
1629         RCB_WRITE_4(sc, vrcb, bge_hostaddr.bge_addr_lo, taddr.bge_addr_lo);
1630         RCB_WRITE_4(sc, vrcb, bge_nicaddr,
1631             BGE_NIC_TXRING_ADDR(0, BGE_TX_RING_CNT));
1632         RCB_WRITE_4(sc, vrcb, bge_maxlen_flags,
1633             BGE_RCB_MAXLEN_FLAGS(BGE_TX_RING_CNT, 0));
1634
1635         /*
1636          * Disable all receive return rings by setting the
1637          * 'ring diabled' bit in the flags field of all the receive
1638          * return ring control blocks, located in NIC memory.
1639          */
1640         if (!BGE_IS_5705_PLUS(sc))
1641                 limit = BGE_RX_RINGS_MAX;
1642         else if (sc->bge_asicrev == BGE_ASICREV_BCM5755)
1643                 limit = 4;
1644         else
1645                 limit = 1;
1646         /* Disable all receive return rings. */
1647         vrcb = BGE_MEMWIN_START + BGE_RX_RETURN_RING_RCB;
1648         for (i = 0; i < limit; i++) {
1649                 RCB_WRITE_4(sc, vrcb, bge_hostaddr.bge_addr_hi, 0);
1650                 RCB_WRITE_4(sc, vrcb, bge_hostaddr.bge_addr_lo, 0);
1651                 RCB_WRITE_4(sc, vrcb, bge_maxlen_flags,
1652                     BGE_RCB_FLAG_RING_DISABLED);
1653                 RCB_WRITE_4(sc, vrcb, bge_nicaddr, 0);
1654                 bge_writembx(sc, BGE_MBX_RX_CONS0_LO +
1655                     (i * (sizeof(uint64_t))), 0);
1656                 vrcb += sizeof(struct bge_rcb);
1657         }
1658
1659         /*
1660          * Set up receive return ring 0.  Note that the NIC address
1661          * for RX return rings is 0x0.  The return rings live entirely
1662          * within the host, so the nicaddr field in the RCB isn't used.
1663          */
1664         vrcb = BGE_MEMWIN_START + BGE_RX_RETURN_RING_RCB;
1665         BGE_HOSTADDR(taddr, sc->bge_ldata.bge_rx_return_ring_paddr);
1666         RCB_WRITE_4(sc, vrcb, bge_hostaddr.bge_addr_hi, taddr.bge_addr_hi);
1667         RCB_WRITE_4(sc, vrcb, bge_hostaddr.bge_addr_lo, taddr.bge_addr_lo);
1668         RCB_WRITE_4(sc, vrcb, bge_nicaddr, 0);
1669         RCB_WRITE_4(sc, vrcb, bge_maxlen_flags,
1670             BGE_RCB_MAXLEN_FLAGS(sc->bge_return_ring_cnt, 0));
1671
1672         /* Set random backoff seed for TX */
1673         CSR_WRITE_4(sc, BGE_TX_RANDOM_BACKOFF,
1674             sc->arpcom.ac_enaddr[0] + sc->arpcom.ac_enaddr[1] +
1675             sc->arpcom.ac_enaddr[2] + sc->arpcom.ac_enaddr[3] +
1676             sc->arpcom.ac_enaddr[4] + sc->arpcom.ac_enaddr[5] +
1677             BGE_TX_BACKOFF_SEED_MASK);
1678
1679         /* Set inter-packet gap */
1680         CSR_WRITE_4(sc, BGE_TX_LENGTHS, 0x2620);
1681
1682         /*
1683          * Specify which ring to use for packets that don't match
1684          * any RX rules.
1685          */
1686         CSR_WRITE_4(sc, BGE_RX_RULES_CFG, 0x08);
1687
1688         /*
1689          * Configure number of RX lists. One interrupt distribution
1690          * list, sixteen active lists, one bad frames class.
1691          */
1692         CSR_WRITE_4(sc, BGE_RXLP_CFG, 0x181);
1693
1694         /* Inialize RX list placement stats mask. */
1695         CSR_WRITE_4(sc, BGE_RXLP_STATS_ENABLE_MASK, 0x007FFFFF);
1696         CSR_WRITE_4(sc, BGE_RXLP_STATS_CTL, 0x1);
1697
1698         /* Disable host coalescing until we get it set up */
1699         CSR_WRITE_4(sc, BGE_HCC_MODE, 0x00000000);
1700
1701         /* Poll to make sure it's shut down. */
1702         for (i = 0; i < BGE_TIMEOUT; i++) {
1703                 if (!(CSR_READ_4(sc, BGE_HCC_MODE) & BGE_HCCMODE_ENABLE))
1704                         break;
1705                 DELAY(10);
1706         }
1707
1708         if (i == BGE_TIMEOUT) {
1709                 if_printf(&sc->arpcom.ac_if,
1710                           "host coalescing engine failed to idle\n");
1711                 return(ENXIO);
1712         }
1713
1714         /* Set up host coalescing defaults */
1715         CSR_WRITE_4(sc, BGE_HCC_RX_COAL_TICKS, sc->bge_rx_coal_ticks);
1716         CSR_WRITE_4(sc, BGE_HCC_TX_COAL_TICKS, sc->bge_tx_coal_ticks);
1717         CSR_WRITE_4(sc, BGE_HCC_RX_MAX_COAL_BDS, sc->bge_rx_coal_bds);
1718         CSR_WRITE_4(sc, BGE_HCC_TX_MAX_COAL_BDS, sc->bge_tx_coal_bds);
1719         if (!BGE_IS_5705_PLUS(sc)) {
1720                 CSR_WRITE_4(sc, BGE_HCC_RX_COAL_TICKS_INT,
1721                     sc->bge_rx_coal_ticks_int);
1722                 CSR_WRITE_4(sc, BGE_HCC_TX_COAL_TICKS_INT,
1723                     sc->bge_tx_coal_ticks_int);
1724         }
1725         /*
1726          * NOTE:
1727          * The datasheet (57XX-PG105-R) says BCM5705+ do not
1728          * have following two registers; obviously it is wrong.
1729          */
1730         CSR_WRITE_4(sc, BGE_HCC_RX_MAX_COAL_BDS_INT, sc->bge_rx_coal_bds_int);
1731         CSR_WRITE_4(sc, BGE_HCC_TX_MAX_COAL_BDS_INT, sc->bge_tx_coal_bds_int);
1732
1733         /* Set up address of statistics block */
1734         if (!BGE_IS_5705_PLUS(sc)) {
1735                 CSR_WRITE_4(sc, BGE_HCC_STATS_ADDR_HI,
1736                     BGE_ADDR_HI(sc->bge_ldata.bge_stats_paddr));
1737                 CSR_WRITE_4(sc, BGE_HCC_STATS_ADDR_LO,
1738                     BGE_ADDR_LO(sc->bge_ldata.bge_stats_paddr));
1739
1740                 CSR_WRITE_4(sc, BGE_HCC_STATS_BASEADDR, BGE_STATS_BLOCK);
1741                 CSR_WRITE_4(sc, BGE_HCC_STATUSBLK_BASEADDR, BGE_STATUS_BLOCK);
1742                 CSR_WRITE_4(sc, BGE_HCC_STATS_TICKS, sc->bge_stat_ticks);
1743         }
1744
1745         /* Set up address of status block */
1746         bzero(sc->bge_ldata.bge_status_block, BGE_STATUS_BLK_SZ);
1747         CSR_WRITE_4(sc, BGE_HCC_STATUSBLK_ADDR_HI,
1748             BGE_ADDR_HI(sc->bge_ldata.bge_status_block_paddr));
1749         CSR_WRITE_4(sc, BGE_HCC_STATUSBLK_ADDR_LO,
1750             BGE_ADDR_LO(sc->bge_ldata.bge_status_block_paddr));
1751
1752         /*
1753          * Set up status block partail update size.
1754          *
1755          * Because only single TX ring, RX produce ring and Rx return ring
1756          * are used, ask device to update only minimum part of status block
1757          * except for BCM5700 AX/BX, whose status block partial update size
1758          * can't be configured.
1759          */
1760         if (sc->bge_asicrev == BGE_ASICREV_BCM5700 &&
1761             sc->bge_chipid != BGE_CHIPID_BCM5700_C0) {
1762                 /* XXX Actually reserved on BCM5700 AX/BX */
1763                 val = BGE_STATBLKSZ_FULL;
1764         } else {
1765                 val = BGE_STATBLKSZ_32BYTE;
1766         }
1767 #if 0
1768         /*
1769          * Does not seem to have visible effect in both
1770          * bulk data (1472B UDP datagram) and tiny data
1771          * (18B UDP datagram) TX tests.
1772          */
1773         if (!BGE_IS_CRIPPLED(sc))
1774                 val |= BGE_HCCMODE_CLRTICK_TX;
1775 #endif
1776
1777         /* Turn on host coalescing state machine */
1778         CSR_WRITE_4(sc, BGE_HCC_MODE, val | BGE_HCCMODE_ENABLE);
1779
1780         /* Turn on RX BD completion state machine and enable attentions */
1781         CSR_WRITE_4(sc, BGE_RBDC_MODE,
1782             BGE_RBDCMODE_ENABLE|BGE_RBDCMODE_ATTN);
1783
1784         /* Turn on RX list placement state machine */
1785         CSR_WRITE_4(sc, BGE_RXLP_MODE, BGE_RXLPMODE_ENABLE);
1786
1787         /* Turn on RX list selector state machine. */
1788         if (!BGE_IS_5705_PLUS(sc))
1789                 CSR_WRITE_4(sc, BGE_RXLS_MODE, BGE_RXLSMODE_ENABLE);
1790
1791         val = BGE_MACMODE_TXDMA_ENB | BGE_MACMODE_RXDMA_ENB |
1792             BGE_MACMODE_RX_STATS_CLEAR | BGE_MACMODE_TX_STATS_CLEAR |
1793             BGE_MACMODE_RX_STATS_ENB | BGE_MACMODE_TX_STATS_ENB |
1794             BGE_MACMODE_FRMHDR_DMA_ENB;
1795
1796         if (sc->bge_flags & BGE_FLAG_TBI)
1797                 val |= BGE_PORTMODE_TBI;
1798         else if (sc->bge_flags & BGE_FLAG_MII_SERDES)
1799                 val |= BGE_PORTMODE_GMII;
1800         else
1801                 val |= BGE_PORTMODE_MII;
1802
1803         /* Turn on DMA, clear stats */
1804         CSR_WRITE_4(sc, BGE_MAC_MODE, val);
1805
1806         /* Set misc. local control, enable interrupts on attentions */
1807         CSR_WRITE_4(sc, BGE_MISC_LOCAL_CTL, BGE_MLC_INTR_ONATTN);
1808
1809 #ifdef notdef
1810         /* Assert GPIO pins for PHY reset */
1811         BGE_SETBIT(sc, BGE_MISC_LOCAL_CTL, BGE_MLC_MISCIO_OUT0|
1812             BGE_MLC_MISCIO_OUT1|BGE_MLC_MISCIO_OUT2);
1813         BGE_SETBIT(sc, BGE_MISC_LOCAL_CTL, BGE_MLC_MISCIO_OUTEN0|
1814             BGE_MLC_MISCIO_OUTEN1|BGE_MLC_MISCIO_OUTEN2);
1815 #endif
1816
1817         /* Turn on DMA completion state machine */
1818         if (!BGE_IS_5705_PLUS(sc))
1819                 CSR_WRITE_4(sc, BGE_DMAC_MODE, BGE_DMACMODE_ENABLE);
1820
1821         /* Turn on write DMA state machine */
1822         val = BGE_WDMAMODE_ENABLE|BGE_WDMAMODE_ALL_ATTNS;
1823         if (BGE_IS_5755_PLUS(sc)) {
1824                 /* Enable host coalescing bug fix. */
1825                 val |= BGE_WDMAMODE_STATUS_TAG_FIX;
1826         }
1827         if (sc->bge_asicrev == BGE_ASICREV_BCM5785) {
1828                 /* Request larger DMA burst size to get better performance. */
1829                 val |= BGE_WDMAMODE_BURST_ALL_DATA;
1830         }
1831         CSR_WRITE_4(sc, BGE_WDMA_MODE, val);
1832         DELAY(40);
1833
1834         if (sc->bge_asicrev == BGE_ASICREV_BCM5761 ||
1835             sc->bge_asicrev == BGE_ASICREV_BCM5784 ||
1836             sc->bge_asicrev == BGE_ASICREV_BCM5785 ||
1837             sc->bge_asicrev == BGE_ASICREV_BCM57780) {
1838                 /*
1839                  * Enable fix for read DMA FIFO overruns.
1840                  * The fix is to limit the number of RX BDs
1841                  * the hardware would fetch at a fime.
1842                  */
1843                 val = CSR_READ_4(sc, BGE_RDMA_RSRVCTRL);
1844                 CSR_WRITE_4(sc, BGE_RDMA_RSRVCTRL,
1845                     val| BGE_RDMA_RSRVCTRL_FIFO_OFLW_FIX);
1846         }
1847
1848         /* Turn on read DMA state machine */
1849         val = BGE_RDMAMODE_ENABLE | BGE_RDMAMODE_ALL_ATTNS;
1850         if (sc->bge_asicrev == BGE_ASICREV_BCM5784 ||
1851             sc->bge_asicrev == BGE_ASICREV_BCM5785 ||
1852             sc->bge_asicrev == BGE_ASICREV_BCM57780)
1853                 val |= BGE_RDMAMODE_BD_SBD_CRPT_ATTN |
1854                   BGE_RDMAMODE_MBUF_RBD_CRPT_ATTN |
1855                   BGE_RDMAMODE_MBUF_SBD_CRPT_ATTN;
1856         if (sc->bge_flags & BGE_FLAG_PCIE)
1857                 val |= BGE_RDMAMODE_FIFO_LONG_BURST;
1858         if (sc->bge_flags & BGE_FLAG_TSO)
1859                 val |= BGE_RDMAMODE_TSO4_ENABLE;
1860         CSR_WRITE_4(sc, BGE_RDMA_MODE, val);
1861         DELAY(40);
1862
1863         /* Turn on RX data completion state machine */
1864         CSR_WRITE_4(sc, BGE_RDC_MODE, BGE_RDCMODE_ENABLE);
1865
1866         /* Turn on RX BD initiator state machine */
1867         CSR_WRITE_4(sc, BGE_RBDI_MODE, BGE_RBDIMODE_ENABLE);
1868
1869         /* Turn on RX data and RX BD initiator state machine */
1870         CSR_WRITE_4(sc, BGE_RDBDI_MODE, BGE_RDBDIMODE_ENABLE);
1871
1872         /* Turn on Mbuf cluster free state machine */
1873         if (!BGE_IS_5705_PLUS(sc))
1874                 CSR_WRITE_4(sc, BGE_MBCF_MODE, BGE_MBCFMODE_ENABLE);
1875
1876         /* Turn on send BD completion state machine */
1877         CSR_WRITE_4(sc, BGE_SBDC_MODE, BGE_SBDCMODE_ENABLE);
1878
1879         /* Turn on send data completion state machine */
1880         val = BGE_SDCMODE_ENABLE;
1881         if (sc->bge_asicrev == BGE_ASICREV_BCM5761)
1882                 val |= BGE_SDCMODE_CDELAY;
1883         CSR_WRITE_4(sc, BGE_SDC_MODE, val);
1884
1885         /* Turn on send data initiator state machine */
1886         if (sc->bge_flags & BGE_FLAG_TSO)
1887                 CSR_WRITE_4(sc, BGE_SDI_MODE, BGE_SDIMODE_ENABLE |
1888                     BGE_SDIMODE_HW_LSO_PRE_DMA);
1889         else
1890                 CSR_WRITE_4(sc, BGE_SDI_MODE, BGE_SDIMODE_ENABLE);
1891
1892         /* Turn on send BD initiator state machine */
1893         CSR_WRITE_4(sc, BGE_SBDI_MODE, BGE_SBDIMODE_ENABLE);
1894
1895         /* Turn on send BD selector state machine */
1896         CSR_WRITE_4(sc, BGE_SRS_MODE, BGE_SRSMODE_ENABLE);
1897
1898         CSR_WRITE_4(sc, BGE_SDI_STATS_ENABLE_MASK, 0x007FFFFF);
1899         CSR_WRITE_4(sc, BGE_SDI_STATS_CTL,
1900             BGE_SDISTATSCTL_ENABLE|BGE_SDISTATSCTL_FASTER);
1901
1902         /* ack/clear link change events */
1903         CSR_WRITE_4(sc, BGE_MAC_STS, BGE_MACSTAT_SYNC_CHANGED|
1904             BGE_MACSTAT_CFG_CHANGED|BGE_MACSTAT_MI_COMPLETE|
1905             BGE_MACSTAT_LINK_CHANGED);
1906         CSR_WRITE_4(sc, BGE_MI_STS, 0);
1907
1908         /*
1909          * Enable attention when the link has changed state for
1910          * devices that use auto polling.
1911          */
1912         if (sc->bge_flags & BGE_FLAG_TBI) {
1913                 CSR_WRITE_4(sc, BGE_MI_STS, BGE_MISTS_LINK);
1914         } else {
1915                 if (sc->bge_mi_mode & BGE_MIMODE_AUTOPOLL) {
1916                         CSR_WRITE_4(sc, BGE_MI_MODE, sc->bge_mi_mode);
1917                         DELAY(80);
1918                 }
1919                 if (sc->bge_asicrev == BGE_ASICREV_BCM5700 &&
1920                     sc->bge_chipid != BGE_CHIPID_BCM5700_B2) {
1921                         CSR_WRITE_4(sc, BGE_MAC_EVT_ENB,
1922                             BGE_EVTENB_MI_INTERRUPT);
1923                 }
1924         }
1925
1926         /*
1927          * Clear any pending link state attention.
1928          * Otherwise some link state change events may be lost until attention
1929          * is cleared by bge_intr() -> bge_softc.bge_link_upd() sequence.
1930          * It's not necessary on newer BCM chips - perhaps enabling link
1931          * state change attentions implies clearing pending attention.
1932          */
1933         CSR_WRITE_4(sc, BGE_MAC_STS, BGE_MACSTAT_SYNC_CHANGED|
1934             BGE_MACSTAT_CFG_CHANGED|BGE_MACSTAT_MI_COMPLETE|
1935             BGE_MACSTAT_LINK_CHANGED);
1936
1937         /* Enable link state change attentions. */
1938         BGE_SETBIT(sc, BGE_MAC_EVT_ENB, BGE_EVTENB_LINK_CHANGED);
1939
1940         return(0);
1941 }
1942
1943 /*
1944  * Probe for a Broadcom chip. Check the PCI vendor and device IDs
1945  * against our list and return its name if we find a match. Note
1946  * that since the Broadcom controller contains VPD support, we
1947  * can get the device name string from the controller itself instead
1948  * of the compiled-in string. This is a little slow, but it guarantees
1949  * we'll always announce the right product name.
1950  */
1951 static int
1952 bge_probe(device_t dev)
1953 {
1954         const struct bge_type *t;
1955         uint16_t product, vendor;
1956
1957         product = pci_get_device(dev);
1958         vendor = pci_get_vendor(dev);
1959
1960         for (t = bge_devs; t->bge_name != NULL; t++) {
1961                 if (vendor == t->bge_vid && product == t->bge_did)
1962                         break;
1963         }
1964         if (t->bge_name == NULL)
1965                 return(ENXIO);
1966
1967         device_set_desc(dev, t->bge_name);
1968         return(0);
1969 }
1970
1971 static int
1972 bge_attach(device_t dev)
1973 {
1974         struct ifnet *ifp;
1975         struct bge_softc *sc;
1976         uint32_t hwcfg = 0, misccfg;
1977         int error = 0, rid, capmask;
1978         uint8_t ether_addr[ETHER_ADDR_LEN];
1979         uint16_t product, vendor;
1980         driver_intr_t *intr_func;
1981         uintptr_t mii_priv = 0;
1982         u_int intr_flags;
1983         int msi_enable;
1984
1985         sc = device_get_softc(dev);
1986         sc->bge_dev = dev;
1987         callout_init_mp(&sc->bge_stat_timer);
1988         lwkt_serialize_init(&sc->bge_jslot_serializer);
1989
1990         product = pci_get_device(dev);
1991         vendor = pci_get_vendor(dev);
1992
1993 #ifndef BURN_BRIDGES
1994         if (pci_get_powerstate(dev) != PCI_POWERSTATE_D0) {
1995                 uint32_t irq, mem;
1996
1997                 irq = pci_read_config(dev, PCIR_INTLINE, 4);
1998                 mem = pci_read_config(dev, BGE_PCI_BAR0, 4);
1999
2000                 device_printf(dev, "chip is in D%d power mode "
2001                     "-- setting to D0\n", pci_get_powerstate(dev));
2002
2003                 pci_set_powerstate(dev, PCI_POWERSTATE_D0);
2004
2005                 pci_write_config(dev, PCIR_INTLINE, irq, 4);
2006                 pci_write_config(dev, BGE_PCI_BAR0, mem, 4);
2007         }
2008 #endif  /* !BURN_BRIDGE */
2009
2010         /*
2011          * Map control/status registers.
2012          */
2013         pci_enable_busmaster(dev);
2014
2015         rid = BGE_PCI_BAR0;
2016         sc->bge_res = bus_alloc_resource_any(dev, SYS_RES_MEMORY, &rid,
2017             RF_ACTIVE);
2018
2019         if (sc->bge_res == NULL) {
2020                 device_printf(dev, "couldn't map memory\n");
2021                 return ENXIO;
2022         }
2023
2024         sc->bge_btag = rman_get_bustag(sc->bge_res);
2025         sc->bge_bhandle = rman_get_bushandle(sc->bge_res);
2026
2027         /* Save various chip information */
2028         sc->bge_chipid =
2029             pci_read_config(dev, BGE_PCI_MISC_CTL, 4) >>
2030             BGE_PCIMISCCTL_ASICREV_SHIFT;
2031         if (BGE_ASICREV(sc->bge_chipid) == BGE_ASICREV_USE_PRODID_REG) {
2032                 /* All chips, which use BGE_PCI_PRODID_ASICREV, have CPMU */
2033                 sc->bge_flags |= BGE_FLAG_CPMU;
2034                 sc->bge_chipid = pci_read_config(dev, BGE_PCI_PRODID_ASICREV, 4);
2035         }
2036         sc->bge_asicrev = BGE_ASICREV(sc->bge_chipid);
2037         sc->bge_chiprev = BGE_CHIPREV(sc->bge_chipid);
2038
2039         /* Save chipset family. */
2040         switch (sc->bge_asicrev) {
2041         case BGE_ASICREV_BCM5755:
2042         case BGE_ASICREV_BCM5761:
2043         case BGE_ASICREV_BCM5784:
2044         case BGE_ASICREV_BCM5785:
2045         case BGE_ASICREV_BCM5787:
2046         case BGE_ASICREV_BCM57780:
2047             sc->bge_flags |= BGE_FLAG_5755_PLUS | BGE_FLAG_575X_PLUS |
2048                 BGE_FLAG_5705_PLUS;
2049             break;
2050
2051         case BGE_ASICREV_BCM5700:
2052         case BGE_ASICREV_BCM5701:
2053         case BGE_ASICREV_BCM5703:
2054         case BGE_ASICREV_BCM5704:
2055                 sc->bge_flags |= BGE_FLAG_5700_FAMILY | BGE_FLAG_JUMBO;
2056                 break;
2057
2058         case BGE_ASICREV_BCM5714_A0:
2059         case BGE_ASICREV_BCM5780:
2060         case BGE_ASICREV_BCM5714:
2061                 sc->bge_flags |= BGE_FLAG_5714_FAMILY;
2062                 /* Fall through */
2063
2064         case BGE_ASICREV_BCM5750:
2065         case BGE_ASICREV_BCM5752:
2066         case BGE_ASICREV_BCM5906:
2067                 sc->bge_flags |= BGE_FLAG_575X_PLUS;
2068                 /* Fall through */
2069
2070         case BGE_ASICREV_BCM5705:
2071                 sc->bge_flags |= BGE_FLAG_5705_PLUS;
2072                 break;
2073         }
2074
2075         if (sc->bge_asicrev == BGE_ASICREV_BCM5906)
2076                 sc->bge_flags |= BGE_FLAG_NO_EEPROM;
2077
2078         misccfg = CSR_READ_4(sc, BGE_MISC_CFG) & BGE_MISCCFG_BOARD_ID_MASK;
2079         if (sc->bge_asicrev == BGE_ASICREV_BCM5705 &&
2080             (misccfg == BGE_MISCCFG_BOARD_ID_5788 ||
2081              misccfg == BGE_MISCCFG_BOARD_ID_5788M))
2082                 sc->bge_flags |= BGE_FLAG_5788;
2083
2084         /* BCM5755 or higher and BCM5906 have short DMA bug. */
2085         if (BGE_IS_5755_PLUS(sc) || sc->bge_asicrev == BGE_ASICREV_BCM5906)
2086                 sc->bge_flags |= BGE_FLAG_SHORTDMA;
2087
2088         /*
2089          * Check if this is a PCI-X or PCI Express device.
2090          */
2091         if (BGE_IS_5705_PLUS(sc)) {
2092                 if (pci_is_pcie(dev)) {
2093                         sc->bge_flags |= BGE_FLAG_PCIE;
2094                         sc->bge_pciecap = pci_get_pciecap_ptr(sc->bge_dev);
2095                         pcie_set_max_readrq(dev, PCIEM_DEVCTL_MAX_READRQ_4096);
2096                 }
2097         } else {
2098                 /*
2099                  * Check if the device is in PCI-X Mode.
2100                  * (This bit is not valid on PCI Express controllers.)
2101                  */
2102                 if ((pci_read_config(sc->bge_dev, BGE_PCI_PCISTATE, 4) &
2103                     BGE_PCISTATE_PCI_BUSMODE) == 0) {
2104                         sc->bge_flags |= BGE_FLAG_PCIX;
2105                         sc->bge_pcixcap = pci_get_pcixcap_ptr(sc->bge_dev);
2106                         sc->bge_mbox_reorder = device_getenv_int(sc->bge_dev,
2107                             "mbox_reorder", 0);
2108                 }
2109         }
2110         device_printf(dev, "CHIP ID 0x%08x; "
2111                       "ASIC REV 0x%02x; CHIP REV 0x%02x; %s\n",
2112                       sc->bge_chipid, sc->bge_asicrev, sc->bge_chiprev,
2113                       (sc->bge_flags & BGE_FLAG_PCIX) ? "PCI-X"
2114                       : ((sc->bge_flags & BGE_FLAG_PCIE) ?
2115                         "PCI-E" : "PCI"));
2116
2117         /*
2118          * The 40bit DMA bug applies to the 5714/5715 controllers and is
2119          * not actually a MAC controller bug but an issue with the embedded
2120          * PCIe to PCI-X bridge in the device. Use 40bit DMA workaround.
2121          */
2122         if ((sc->bge_flags & BGE_FLAG_PCIX) &&
2123             (BGE_IS_5714_FAMILY(sc) || device_getenv_int(dev, "dma40b", 0)))
2124                 sc->bge_flags |= BGE_FLAG_MAXADDR_40BIT;
2125
2126         /*
2127          * When using the BCM5701 in PCI-X mode, data corruption has
2128          * been observed in the first few bytes of some received packets.
2129          * Aligning the packet buffer in memory eliminates the corruption.
2130          * Unfortunately, this misaligns the packet payloads.  On platforms
2131          * which do not support unaligned accesses, we will realign the
2132          * payloads by copying the received packets.
2133          */
2134         if (sc->bge_asicrev == BGE_ASICREV_BCM5701 &&
2135             (sc->bge_flags & BGE_FLAG_PCIX))
2136                 sc->bge_flags |= BGE_FLAG_RX_ALIGNBUG;
2137
2138         if (!BGE_IS_CRIPPLED(sc)) {
2139                 if (device_getenv_int(dev, "status_tag", 1)) {
2140                         sc->bge_flags |= BGE_FLAG_STATUS_TAG;
2141                         sc->bge_pci_miscctl = BGE_PCIMISCCTL_TAGGED_STATUS;
2142                         if (bootverbose)
2143                                 device_printf(dev, "enable status tag\n");
2144                 }
2145         }
2146
2147         if (BGE_IS_5755_PLUS(sc)) {
2148                 /*
2149                  * BCM5754 and BCM5787 shares the same ASIC id so
2150                  * explicit device id check is required.
2151                  * Due to unknown reason TSO does not work on BCM5755M.
2152                  */
2153                 if (product != PCI_PRODUCT_BROADCOM_BCM5754 &&
2154                     product != PCI_PRODUCT_BROADCOM_BCM5754M &&
2155                     product != PCI_PRODUCT_BROADCOM_BCM5755M)
2156                         sc->bge_flags |= BGE_FLAG_TSO;
2157         }
2158
2159         /*
2160          * Set various PHY quirk flags.
2161          */
2162
2163         if ((sc->bge_asicrev == BGE_ASICREV_BCM5700 ||
2164              sc->bge_asicrev == BGE_ASICREV_BCM5701) &&
2165             pci_get_subvendor(dev) == PCI_VENDOR_DELL)
2166                 mii_priv |= BRGPHY_FLAG_NO_3LED;
2167
2168         capmask = MII_CAPMASK_DEFAULT;
2169         if ((sc->bge_asicrev == BGE_ASICREV_BCM5703 &&
2170              (misccfg == 0x4000 || misccfg == 0x8000)) ||
2171             (sc->bge_asicrev == BGE_ASICREV_BCM5705 &&
2172              vendor == PCI_VENDOR_BROADCOM &&
2173              (product == PCI_PRODUCT_BROADCOM_BCM5901 ||
2174               product == PCI_PRODUCT_BROADCOM_BCM5901A2 ||
2175               product == PCI_PRODUCT_BROADCOM_BCM5705F)) ||
2176             (vendor == PCI_VENDOR_BROADCOM &&
2177              (product == PCI_PRODUCT_BROADCOM_BCM5751F ||
2178               product == PCI_PRODUCT_BROADCOM_BCM5753F ||
2179               product == PCI_PRODUCT_BROADCOM_BCM5787F)) ||
2180             product == PCI_PRODUCT_BROADCOM_BCM57790 ||
2181             sc->bge_asicrev == BGE_ASICREV_BCM5906) {
2182                 /* 10/100 only */
2183                 capmask &= ~BMSR_EXTSTAT;
2184         }
2185
2186         mii_priv |= BRGPHY_FLAG_WIRESPEED;
2187         if (sc->bge_asicrev == BGE_ASICREV_BCM5700 ||
2188             (sc->bge_asicrev == BGE_ASICREV_BCM5705 &&
2189              (sc->bge_chipid != BGE_CHIPID_BCM5705_A0 &&
2190               sc->bge_chipid != BGE_CHIPID_BCM5705_A1)) ||
2191             sc->bge_asicrev == BGE_ASICREV_BCM5906)
2192                 mii_priv &= ~BRGPHY_FLAG_WIRESPEED;
2193
2194         if (sc->bge_chipid == BGE_CHIPID_BCM5701_A0 ||
2195             sc->bge_chipid == BGE_CHIPID_BCM5701_B0)
2196                 mii_priv |= BRGPHY_FLAG_CRC_BUG;
2197
2198         if (sc->bge_chiprev == BGE_CHIPREV_5703_AX ||
2199             sc->bge_chiprev == BGE_CHIPREV_5704_AX)
2200                 mii_priv |= BRGPHY_FLAG_ADC_BUG;
2201
2202         if (sc->bge_chipid == BGE_CHIPID_BCM5704_A0)
2203                 mii_priv |= BRGPHY_FLAG_5704_A0;
2204
2205         if (sc->bge_asicrev == BGE_ASICREV_BCM5906)
2206                 mii_priv |= BRGPHY_FLAG_5906;
2207
2208         if (BGE_IS_5705_PLUS(sc) &&
2209             sc->bge_asicrev != BGE_ASICREV_BCM5906 &&
2210             /* sc->bge_asicrev != BGE_ASICREV_BCM5717 && */
2211             sc->bge_asicrev != BGE_ASICREV_BCM5785 &&
2212             /* sc->bge_asicrev != BGE_ASICREV_BCM57765 && */
2213             sc->bge_asicrev != BGE_ASICREV_BCM57780) {
2214                 if (sc->bge_asicrev == BGE_ASICREV_BCM5755 ||
2215                     sc->bge_asicrev == BGE_ASICREV_BCM5761 ||
2216                     sc->bge_asicrev == BGE_ASICREV_BCM5784 ||
2217                     sc->bge_asicrev == BGE_ASICREV_BCM5787) {
2218                         if (product != PCI_PRODUCT_BROADCOM_BCM5722 &&
2219                             product != PCI_PRODUCT_BROADCOM_BCM5756)
2220                                 mii_priv |= BRGPHY_FLAG_JITTER_BUG;
2221                         if (product == PCI_PRODUCT_BROADCOM_BCM5755M)
2222                                 mii_priv |= BRGPHY_FLAG_ADJUST_TRIM;
2223                 } else {
2224                         mii_priv |= BRGPHY_FLAG_BER_BUG;
2225                 }
2226         }
2227
2228         /*
2229          * Allocate interrupt
2230          */
2231         msi_enable = bge_msi_enable;
2232         if ((sc->bge_flags & BGE_FLAG_STATUS_TAG) == 0) {
2233                 /* If "tagged status" is disabled, don't enable MSI */
2234                 msi_enable = 0;
2235         } else if (msi_enable) {
2236                 msi_enable = 0; /* Disable by default */
2237                 if (BGE_IS_575X_PLUS(sc)) {
2238                         msi_enable = 1;
2239                         /* XXX we filter all 5714 chips */
2240                         if (sc->bge_asicrev == BGE_ASICREV_BCM5714 ||
2241                             (sc->bge_asicrev == BGE_ASICREV_BCM5750 &&
2242                              (sc->bge_chiprev == BGE_CHIPREV_5750_AX ||
2243                               sc->bge_chiprev == BGE_CHIPREV_5750_BX)))
2244                                 msi_enable = 0;
2245                         else if (BGE_IS_5755_PLUS(sc) ||
2246                             sc->bge_asicrev == BGE_ASICREV_BCM5906)
2247                                 sc->bge_flags |= BGE_FLAG_ONESHOT_MSI;
2248                 }
2249         }
2250         if (msi_enable) {
2251                 if (pci_find_extcap(dev, PCIY_MSI, &sc->bge_msicap)) {
2252                         device_printf(dev, "no MSI capability\n");
2253                         msi_enable = 0;
2254                 }
2255         }
2256
2257         sc->bge_irq_type = pci_alloc_1intr(dev, msi_enable, &sc->bge_irq_rid,
2258             &intr_flags);
2259
2260         sc->bge_irq = bus_alloc_resource_any(dev, SYS_RES_IRQ, &sc->bge_irq_rid,
2261             intr_flags);
2262         if (sc->bge_irq == NULL) {
2263                 device_printf(dev, "couldn't map interrupt\n");
2264                 error = ENXIO;
2265                 goto fail;
2266         }
2267
2268         if (sc->bge_irq_type == PCI_INTR_TYPE_MSI)
2269                 bge_enable_msi(sc);
2270         else
2271                 sc->bge_flags &= ~BGE_FLAG_ONESHOT_MSI;
2272
2273         /* Initialize if_name earlier, so if_printf could be used */
2274         ifp = &sc->arpcom.ac_if;
2275         if_initname(ifp, device_get_name(dev), device_get_unit(dev));
2276
2277         /* Try to reset the chip. */
2278         bge_reset(sc);
2279
2280         if (bge_chipinit(sc)) {
2281                 device_printf(dev, "chip initialization failed\n");
2282                 error = ENXIO;
2283                 goto fail;
2284         }
2285
2286         /*
2287          * Get station address
2288          */
2289         error = bge_get_eaddr(sc, ether_addr);
2290         if (error) {
2291                 device_printf(dev, "failed to read station address\n");
2292                 goto fail;
2293         }
2294
2295         /* 5705/5750 limits RX return ring to 512 entries. */
2296         if (BGE_IS_5705_PLUS(sc))
2297                 sc->bge_return_ring_cnt = BGE_RETURN_RING_CNT_5705;
2298         else
2299                 sc->bge_return_ring_cnt = BGE_RETURN_RING_CNT;
2300
2301         error = bge_dma_alloc(sc);
2302         if (error)
2303                 goto fail;
2304
2305         /* Set default tuneable values. */
2306         sc->bge_stat_ticks = BGE_TICKS_PER_SEC;
2307         sc->bge_rx_coal_ticks = BGE_RX_COAL_TICKS_DEF;
2308         sc->bge_tx_coal_ticks = BGE_TX_COAL_TICKS_DEF;
2309         sc->bge_rx_coal_bds = BGE_RX_COAL_BDS_DEF;
2310         sc->bge_tx_coal_bds = BGE_TX_COAL_BDS_DEF;
2311         if (sc->bge_flags & BGE_FLAG_STATUS_TAG) {
2312                 sc->bge_rx_coal_ticks_int = BGE_RX_COAL_TICKS_DEF;
2313                 sc->bge_tx_coal_ticks_int = BGE_TX_COAL_TICKS_DEF;
2314                 sc->bge_rx_coal_bds_int = BGE_RX_COAL_BDS_DEF;
2315                 sc->bge_tx_coal_bds_int = BGE_TX_COAL_BDS_DEF;
2316         } else {
2317                 sc->bge_rx_coal_ticks_int = BGE_RX_COAL_TICKS_MIN;
2318                 sc->bge_tx_coal_ticks_int = BGE_TX_COAL_TICKS_MIN;
2319                 sc->bge_rx_coal_bds_int = BGE_RX_COAL_BDS_MIN;
2320                 sc->bge_tx_coal_bds_int = BGE_TX_COAL_BDS_MIN;
2321         }
2322
2323         /* Set up TX spare and reserved descriptor count */
2324         if (sc->bge_flags & BGE_FLAG_TSO) {
2325                 sc->bge_txspare = BGE_NSEG_SPARE_TSO;
2326                 sc->bge_txrsvd = BGE_NSEG_RSVD_TSO;
2327         } else {
2328                 sc->bge_txspare = BGE_NSEG_SPARE;
2329                 sc->bge_txrsvd = BGE_NSEG_RSVD;
2330         }
2331
2332         /* Set up ifnet structure */
2333         ifp->if_softc = sc;
2334         ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST;
2335         ifp->if_ioctl = bge_ioctl;
2336         ifp->if_start = bge_start;
2337 #ifdef DEVICE_POLLING
2338         ifp->if_poll = bge_poll;
2339 #endif
2340         ifp->if_watchdog = bge_watchdog;
2341         ifp->if_init = bge_init;
2342         ifp->if_mtu = ETHERMTU;
2343         ifp->if_capabilities = IFCAP_VLAN_HWTAGGING | IFCAP_VLAN_MTU;
2344         ifq_set_maxlen(&ifp->if_snd, BGE_TX_RING_CNT - 1);
2345         ifq_set_ready(&ifp->if_snd);
2346
2347         /*
2348          * 5700 B0 chips do not support checksumming correctly due
2349          * to hardware bugs.
2350          */
2351         if (sc->bge_chipid != BGE_CHIPID_BCM5700_B0) {
2352                 ifp->if_capabilities |= IFCAP_HWCSUM;
2353                 ifp->if_hwassist |= BGE_CSUM_FEATURES;
2354         }
2355         if (sc->bge_flags & BGE_FLAG_TSO) {
2356                 ifp->if_capabilities |= IFCAP_TSO;
2357                 ifp->if_hwassist |= CSUM_TSO;
2358         }
2359         ifp->if_capenable = ifp->if_capabilities;
2360
2361         /*
2362          * Figure out what sort of media we have by checking the
2363          * hardware config word in the first 32k of NIC internal memory,
2364          * or fall back to examining the EEPROM if necessary.
2365          * Note: on some BCM5700 cards, this value appears to be unset.
2366          * If that's the case, we have to rely on identifying the NIC
2367          * by its PCI subsystem ID, as we do below for the SysKonnect
2368          * SK-9D41.
2369          */
2370         if (bge_readmem_ind(sc, BGE_SOFTWARE_GENCOMM_SIG) == BGE_MAGIC_NUMBER) {
2371                 hwcfg = bge_readmem_ind(sc, BGE_SOFTWARE_GENCOMM_NICCFG);
2372         } else {
2373                 if (bge_read_eeprom(sc, (caddr_t)&hwcfg, BGE_EE_HWCFG_OFFSET,
2374                                     sizeof(hwcfg))) {
2375                         device_printf(dev, "failed to read EEPROM\n");
2376                         error = ENXIO;
2377                         goto fail;
2378                 }
2379                 hwcfg = ntohl(hwcfg);
2380         }
2381
2382         /* The SysKonnect SK-9D41 is a 1000baseSX card. */
2383         if (pci_get_subvendor(dev) == PCI_PRODUCT_SCHNEIDERKOCH_SK_9D41 ||
2384             (hwcfg & BGE_HWCFG_MEDIA) == BGE_MEDIA_FIBER) {
2385                 if (BGE_IS_5714_FAMILY(sc))
2386                         sc->bge_flags |= BGE_FLAG_MII_SERDES;
2387                 else
2388                         sc->bge_flags |= BGE_FLAG_TBI;
2389         }
2390
2391         /* Setup MI MODE */
2392         if (sc->bge_flags & BGE_FLAG_CPMU)
2393                 sc->bge_mi_mode = BGE_MIMODE_500KHZ_CONST;
2394         else
2395                 sc->bge_mi_mode = BGE_MIMODE_BASE;
2396         if (BGE_IS_5700_FAMILY(sc) || sc->bge_asicrev == BGE_ASICREV_BCM5705) {
2397                 /* Enable auto polling for BCM570[0-5]. */
2398                 sc->bge_mi_mode |= BGE_MIMODE_AUTOPOLL;
2399         }
2400
2401         /* Setup link status update stuffs */
2402         if (sc->bge_asicrev == BGE_ASICREV_BCM5700 &&
2403             sc->bge_chipid != BGE_CHIPID_BCM5700_B2) {
2404                 sc->bge_link_upd = bge_bcm5700_link_upd;
2405                 sc->bge_link_chg = BGE_MACSTAT_MI_INTERRUPT;
2406         } else if (sc->bge_flags & BGE_FLAG_TBI) {
2407                 sc->bge_link_upd = bge_tbi_link_upd;
2408                 sc->bge_link_chg = BGE_MACSTAT_LINK_CHANGED;
2409         } else if (sc->bge_mi_mode & BGE_MIMODE_AUTOPOLL) {
2410                 sc->bge_link_upd = bge_autopoll_link_upd;
2411                 sc->bge_link_chg = BGE_MACSTAT_LINK_CHANGED;
2412         } else {
2413                 sc->bge_link_upd = bge_copper_link_upd;
2414                 sc->bge_link_chg = BGE_MACSTAT_LINK_CHANGED;
2415         }
2416
2417         /*
2418          * Broadcom's own driver always assumes the internal
2419          * PHY is at GMII address 1.  On some chips, the PHY responds
2420          * to accesses at all addresses, which could cause us to
2421          * bogusly attach the PHY 32 times at probe type.  Always
2422          * restricting the lookup to address 1 is simpler than
2423          * trying to figure out which chips revisions should be
2424          * special-cased.
2425          */
2426         sc->bge_phyno = 1;
2427
2428         if (sc->bge_flags & BGE_FLAG_TBI) {
2429                 ifmedia_init(&sc->bge_ifmedia, IFM_IMASK,
2430                     bge_ifmedia_upd, bge_ifmedia_sts);
2431                 ifmedia_add(&sc->bge_ifmedia, IFM_ETHER|IFM_1000_SX, 0, NULL);
2432                 ifmedia_add(&sc->bge_ifmedia,
2433                     IFM_ETHER|IFM_1000_SX|IFM_FDX, 0, NULL);
2434                 ifmedia_add(&sc->bge_ifmedia, IFM_ETHER|IFM_AUTO, 0, NULL);
2435                 ifmedia_set(&sc->bge_ifmedia, IFM_ETHER|IFM_AUTO);
2436                 sc->bge_ifmedia.ifm_media = sc->bge_ifmedia.ifm_cur->ifm_media;
2437         } else {
2438                 struct mii_probe_args mii_args;
2439
2440                 mii_probe_args_init(&mii_args, bge_ifmedia_upd, bge_ifmedia_sts);
2441                 mii_args.mii_probemask = 1 << sc->bge_phyno;
2442                 mii_args.mii_capmask = capmask;
2443                 mii_args.mii_privtag = MII_PRIVTAG_BRGPHY;
2444                 mii_args.mii_priv = mii_priv;
2445
2446                 error = mii_probe(dev, &sc->bge_miibus, &mii_args);
2447                 if (error) {
2448                         device_printf(dev, "MII without any PHY!\n");
2449                         goto fail;
2450                 }
2451         }
2452
2453         /*
2454          * Create sysctl nodes.
2455          */
2456         sysctl_ctx_init(&sc->bge_sysctl_ctx);
2457         sc->bge_sysctl_tree = SYSCTL_ADD_NODE(&sc->bge_sysctl_ctx,
2458                                               SYSCTL_STATIC_CHILDREN(_hw),
2459                                               OID_AUTO,
2460                                               device_get_nameunit(dev),
2461                                               CTLFLAG_RD, 0, "");
2462         if (sc->bge_sysctl_tree == NULL) {
2463                 device_printf(dev, "can't add sysctl node\n");
2464                 error = ENXIO;
2465                 goto fail;
2466         }
2467
2468         SYSCTL_ADD_PROC(&sc->bge_sysctl_ctx,
2469                         SYSCTL_CHILDREN(sc->bge_sysctl_tree),
2470                         OID_AUTO, "rx_coal_ticks",
2471                         CTLTYPE_INT | CTLFLAG_RW,
2472                         sc, 0, bge_sysctl_rx_coal_ticks, "I",
2473                         "Receive coalescing ticks (usec).");
2474         SYSCTL_ADD_PROC(&sc->bge_sysctl_ctx,
2475                         SYSCTL_CHILDREN(sc->bge_sysctl_tree),
2476                         OID_AUTO, "tx_coal_ticks",
2477                         CTLTYPE_INT | CTLFLAG_RW,
2478                         sc, 0, bge_sysctl_tx_coal_ticks, "I",
2479                         "Transmit coalescing ticks (usec).");
2480         SYSCTL_ADD_PROC(&sc->bge_sysctl_ctx,
2481                         SYSCTL_CHILDREN(sc->bge_sysctl_tree),
2482                         OID_AUTO, "rx_coal_bds",
2483                         CTLTYPE_INT | CTLFLAG_RW,
2484                         sc, 0, bge_sysctl_rx_coal_bds, "I",
2485                         "Receive max coalesced BD count.");
2486         SYSCTL_ADD_PROC(&sc->bge_sysctl_ctx,
2487                         SYSCTL_CHILDREN(sc->bge_sysctl_tree),
2488                         OID_AUTO, "tx_coal_bds",
2489                         CTLTYPE_INT | CTLFLAG_RW,
2490                         sc, 0, bge_sysctl_tx_coal_bds, "I",
2491                         "Transmit max coalesced BD count.");
2492         if (sc->bge_flags & BGE_FLAG_PCIE) {
2493                 /*
2494                  * A common design characteristic for many Broadcom
2495                  * client controllers is that they only support a
2496                  * single outstanding DMA read operation on the PCIe
2497                  * bus. This means that it will take twice as long to
2498                  * fetch a TX frame that is split into header and
2499                  * payload buffers as it does to fetch a single,
2500                  * contiguous TX frame (2 reads vs. 1 read). For these
2501                  * controllers, coalescing buffers to reduce the number
2502                  * of memory reads is effective way to get maximum
2503                  * performance(about 940Mbps).  Without collapsing TX
2504                  * buffers the maximum TCP bulk transfer performance
2505                  * is about 850Mbps. However forcing coalescing mbufs
2506                  * consumes a lot of CPU cycles, so leave it off by
2507                  * default.
2508                  */
2509                 SYSCTL_ADD_INT(&sc->bge_sysctl_ctx,
2510                                SYSCTL_CHILDREN(sc->bge_sysctl_tree),
2511                                OID_AUTO, "force_defrag", CTLFLAG_RW,
2512                                &sc->bge_force_defrag, 0,
2513                                "Force defragment on TX path");
2514         }
2515         if (sc->bge_flags & BGE_FLAG_STATUS_TAG) {
2516                 if (!BGE_IS_5705_PLUS(sc)) {
2517                         SYSCTL_ADD_PROC(&sc->bge_sysctl_ctx,
2518                             SYSCTL_CHILDREN(sc->bge_sysctl_tree), OID_AUTO,
2519                             "rx_coal_ticks_int", CTLTYPE_INT | CTLFLAG_RW,
2520                             sc, 0, bge_sysctl_rx_coal_ticks_int, "I",
2521                             "Receive coalescing ticks "
2522                             "during interrupt (usec).");
2523                         SYSCTL_ADD_PROC(&sc->bge_sysctl_ctx,
2524                             SYSCTL_CHILDREN(sc->bge_sysctl_tree), OID_AUTO,
2525                             "tx_coal_ticks_int", CTLTYPE_INT | CTLFLAG_RW,
2526                             sc, 0, bge_sysctl_tx_coal_ticks_int, "I",
2527                             "Transmit coalescing ticks "
2528                             "during interrupt (usec).");
2529                 }
2530                 SYSCTL_ADD_PROC(&sc->bge_sysctl_ctx,
2531                     SYSCTL_CHILDREN(sc->bge_sysctl_tree), OID_AUTO,
2532                     "rx_coal_bds_int", CTLTYPE_INT | CTLFLAG_RW,
2533                     sc, 0, bge_sysctl_rx_coal_bds_int, "I",
2534                     "Receive max coalesced BD count during interrupt.");
2535                 SYSCTL_ADD_PROC(&sc->bge_sysctl_ctx,
2536                     SYSCTL_CHILDREN(sc->bge_sysctl_tree), OID_AUTO,
2537                     "tx_coal_bds_int", CTLTYPE_INT | CTLFLAG_RW,
2538                     sc, 0, bge_sysctl_tx_coal_bds_int, "I",
2539                     "Transmit max coalesced BD count during interrupt.");
2540         }
2541
2542         /*
2543          * Call MI attach routine.
2544          */
2545         ether_ifattach(ifp, ether_addr, NULL);
2546
2547         if (sc->bge_irq_type == PCI_INTR_TYPE_MSI) {
2548                 if (sc->bge_flags & BGE_FLAG_ONESHOT_MSI) {
2549                         intr_func = bge_msi_oneshot;
2550                         if (bootverbose)
2551                                 device_printf(dev, "oneshot MSI\n");
2552                 } else {
2553                         intr_func = bge_msi;
2554                 }
2555         } else if (sc->bge_flags & BGE_FLAG_STATUS_TAG) {
2556                 intr_func = bge_intr_legacy;
2557         } else {
2558                 intr_func = bge_intr_crippled;
2559         }
2560         error = bus_setup_intr(dev, sc->bge_irq, INTR_MPSAFE, intr_func, sc,
2561             &sc->bge_intrhand, ifp->if_serializer);
2562         if (error) {
2563                 ether_ifdetach(ifp);
2564                 device_printf(dev, "couldn't set up irq\n");
2565                 goto fail;
2566         }
2567
2568         ifp->if_cpuid = rman_get_cpuid(sc->bge_irq);
2569         KKASSERT(ifp->if_cpuid >= 0 && ifp->if_cpuid < ncpus);
2570
2571         return(0);
2572 fail:
2573         bge_detach(dev);
2574         return(error);
2575 }
2576
2577 static int
2578 bge_detach(device_t dev)
2579 {
2580         struct bge_softc *sc = device_get_softc(dev);
2581
2582         if (device_is_attached(dev)) {
2583                 struct ifnet *ifp = &sc->arpcom.ac_if;
2584
2585                 lwkt_serialize_enter(ifp->if_serializer);
2586                 bge_stop(sc);
2587                 bge_reset(sc);
2588                 bus_teardown_intr(dev, sc->bge_irq, sc->bge_intrhand);
2589                 lwkt_serialize_exit(ifp->if_serializer);
2590
2591                 ether_ifdetach(ifp);
2592         }
2593
2594         if (sc->bge_flags & BGE_FLAG_TBI)
2595                 ifmedia_removeall(&sc->bge_ifmedia);
2596         if (sc->bge_miibus)
2597                 device_delete_child(dev, sc->bge_miibus);
2598         bus_generic_detach(dev);
2599
2600         if (sc->bge_irq != NULL) {
2601                 bus_release_resource(dev, SYS_RES_IRQ, sc->bge_irq_rid,
2602                     sc->bge_irq);
2603         }
2604         if (sc->bge_irq_type == PCI_INTR_TYPE_MSI)
2605                 pci_release_msi(dev);
2606
2607         if (sc->bge_res != NULL) {
2608                 bus_release_resource(dev, SYS_RES_MEMORY,
2609                     BGE_PCI_BAR0, sc->bge_res);
2610         }
2611
2612         if (sc->bge_sysctl_tree != NULL)
2613                 sysctl_ctx_free(&sc->bge_sysctl_ctx);
2614
2615         bge_dma_free(sc);
2616
2617         return 0;
2618 }
2619
2620 static void
2621 bge_reset(struct bge_softc *sc)
2622 {
2623         device_t dev;
2624         uint32_t cachesize, command, pcistate, reset;
2625         void (*write_op)(struct bge_softc *, uint32_t, uint32_t);
2626         int i, val = 0;
2627
2628         dev = sc->bge_dev;
2629
2630         if (BGE_IS_575X_PLUS(sc) && !BGE_IS_5714_FAMILY(sc) &&
2631             sc->bge_asicrev != BGE_ASICREV_BCM5906) {
2632                 if (sc->bge_flags & BGE_FLAG_PCIE)
2633                         write_op = bge_writemem_direct;
2634                 else
2635                         write_op = bge_writemem_ind;
2636         } else {
2637                 write_op = bge_writereg_ind;
2638         }
2639
2640         /* Save some important PCI state. */
2641         cachesize = pci_read_config(dev, BGE_PCI_CACHESZ, 4);
2642         command = pci_read_config(dev, BGE_PCI_CMD, 4);
2643         pcistate = pci_read_config(dev, BGE_PCI_PCISTATE, 4);
2644
2645         pci_write_config(dev, BGE_PCI_MISC_CTL,
2646             BGE_PCIMISCCTL_INDIRECT_ACCESS|BGE_PCIMISCCTL_MASK_PCI_INTR|
2647             BGE_HIF_SWAP_OPTIONS|BGE_PCIMISCCTL_PCISTATE_RW|
2648             sc->bge_pci_miscctl, 4);
2649
2650         /* Disable fastboot on controllers that support it. */
2651         if (sc->bge_asicrev == BGE_ASICREV_BCM5752 ||
2652             BGE_IS_5755_PLUS(sc)) {
2653                 if (bootverbose)
2654                         if_printf(&sc->arpcom.ac_if, "Disabling fastboot\n");
2655                 CSR_WRITE_4(sc, BGE_FASTBOOT_PC, 0x0);
2656         }
2657
2658         /*
2659          * Write the magic number to SRAM at offset 0xB50.
2660          * When firmware finishes its initialization it will
2661          * write ~BGE_MAGIC_NUMBER to the same location.
2662          */
2663         bge_writemem_ind(sc, BGE_SOFTWARE_GENCOMM, BGE_MAGIC_NUMBER);
2664
2665         reset = BGE_MISCCFG_RESET_CORE_CLOCKS|(65<<1);
2666
2667         /* XXX: Broadcom Linux driver. */
2668         if (sc->bge_flags & BGE_FLAG_PCIE) {
2669                 /* Force PCI-E 1.0a mode */
2670                 if (sc->bge_asicrev != BGE_ASICREV_BCM5785 &&
2671                     CSR_READ_4(sc, BGE_PCIE_PHY_TSTCTL) ==
2672                     (BGE_PCIE_PHY_TSTCTL_PSCRAM |
2673                      BGE_PCIE_PHY_TSTCTL_PCIE10)) {
2674                         CSR_WRITE_4(sc, BGE_PCIE_PHY_TSTCTL,
2675                             BGE_PCIE_PHY_TSTCTL_PSCRAM);
2676                 }
2677                 if (sc->bge_chipid != BGE_CHIPID_BCM5750_A0) {
2678                         /* Prevent PCIE link training during global reset */
2679                         CSR_WRITE_4(sc, BGE_MISC_CFG, (1<<29));
2680                         reset |= (1<<29);
2681                 }
2682         }
2683
2684         /*
2685          * Set GPHY Power Down Override to leave GPHY
2686          * powered up in D0 uninitialized.
2687          */
2688         if (BGE_IS_5705_PLUS(sc) && (sc->bge_flags & BGE_FLAG_CPMU) == 0)
2689                 reset |= BGE_MISCCFG_GPHY_PD_OVERRIDE;
2690
2691         /* Issue global reset */
2692         write_op(sc, BGE_MISC_CFG, reset);
2693
2694         if (sc->bge_asicrev == BGE_ASICREV_BCM5906) {
2695                 uint32_t status, ctrl;
2696
2697                 status = CSR_READ_4(sc, BGE_VCPU_STATUS);
2698                 CSR_WRITE_4(sc, BGE_VCPU_STATUS,
2699                     status | BGE_VCPU_STATUS_DRV_RESET);
2700                 ctrl = CSR_READ_4(sc, BGE_VCPU_EXT_CTRL);
2701                 CSR_WRITE_4(sc, BGE_VCPU_EXT_CTRL,
2702                     ctrl & ~BGE_VCPU_EXT_CTRL_HALT_CPU);
2703         }
2704
2705         DELAY(1000);
2706
2707         /* XXX: Broadcom Linux driver. */
2708         if (sc->bge_flags & BGE_FLAG_PCIE) {
2709                 uint16_t devctl;
2710
2711                 if (sc->bge_chipid == BGE_CHIPID_BCM5750_A0) {
2712                         uint32_t v;
2713
2714                         DELAY(500000); /* wait for link training to complete */
2715                         v = pci_read_config(dev, 0xc4, 4);
2716                         pci_write_config(dev, 0xc4, v | (1<<15), 4);
2717                 }
2718
2719                 devctl = pci_read_config(dev,
2720                     sc->bge_pciecap + PCIER_DEVCTRL, 2);
2721
2722                 /* Disable no snoop and disable relaxed ordering. */
2723                 devctl &= ~(PCIEM_DEVCTL_RELAX_ORDER | PCIEM_DEVCTL_NOSNOOP);
2724
2725                 /* Old PCI-E chips only support 128 bytes Max PayLoad Size. */
2726                 if ((sc->bge_flags & BGE_FLAG_CPMU) == 0) {
2727                         devctl &= ~PCIEM_DEVCTL_MAX_PAYLOAD_MASK;
2728                         devctl |= PCIEM_DEVCTL_MAX_PAYLOAD_128;
2729                 }
2730
2731                 pci_write_config(dev, sc->bge_pciecap + PCIER_DEVCTRL,
2732                     devctl, 2);
2733
2734                 /* Clear error status. */
2735                 pci_write_config(dev, sc->bge_pciecap + PCIER_DEVSTS,
2736                     PCIEM_DEVSTS_CORR_ERR |
2737                     PCIEM_DEVSTS_NFATAL_ERR |
2738                     PCIEM_DEVSTS_FATAL_ERR |
2739                     PCIEM_DEVSTS_UNSUPP_REQ, 2);
2740         }
2741
2742         /* Reset some of the PCI state that got zapped by reset */
2743         pci_write_config(dev, BGE_PCI_MISC_CTL,
2744             BGE_PCIMISCCTL_INDIRECT_ACCESS|BGE_PCIMISCCTL_MASK_PCI_INTR|
2745             BGE_HIF_SWAP_OPTIONS|BGE_PCIMISCCTL_PCISTATE_RW|
2746             sc->bge_pci_miscctl, 4);
2747         pci_write_config(dev, BGE_PCI_CACHESZ, cachesize, 4);
2748         pci_write_config(dev, BGE_PCI_CMD, command, 4);
2749         write_op(sc, BGE_MISC_CFG, (65 << 1));
2750
2751         /*
2752          * Disable PCI-X relaxed ordering to ensure status block update
2753          * comes first then packet buffer DMA. Otherwise driver may
2754          * read stale status block.
2755          */
2756         if (sc->bge_flags & BGE_FLAG_PCIX) {
2757                 uint16_t devctl;
2758
2759                 devctl = pci_read_config(dev,
2760                     sc->bge_pcixcap + PCIXR_COMMAND, 2);
2761                 devctl &= ~PCIXM_COMMAND_ERO;
2762                 if (sc->bge_asicrev == BGE_ASICREV_BCM5703) {
2763                         devctl &= ~PCIXM_COMMAND_MAX_READ;
2764                         devctl |= PCIXM_COMMAND_MAX_READ_2048;
2765                 } else if (sc->bge_asicrev == BGE_ASICREV_BCM5704) {
2766                         devctl &= ~(PCIXM_COMMAND_MAX_SPLITS |
2767                             PCIXM_COMMAND_MAX_READ);
2768                         devctl |= PCIXM_COMMAND_MAX_READ_2048;
2769                 }
2770                 pci_write_config(dev, sc->bge_pcixcap + PCIXR_COMMAND,
2771                     devctl, 2);
2772         }
2773
2774         /*
2775          * Enable memory arbiter and re-enable MSI if necessary.
2776          */
2777         if (BGE_IS_5714_FAMILY(sc)) {
2778                 uint32_t val;
2779
2780                 if (sc->bge_irq_type == PCI_INTR_TYPE_MSI) {
2781                         /*
2782                          * Resetting BCM5714 family will clear MSI
2783                          * enable bit; restore it after resetting.
2784                          */
2785                         PCI_SETBIT(sc->bge_dev, sc->bge_msicap + PCIR_MSI_CTRL,
2786                             PCIM_MSICTRL_MSI_ENABLE, 2);
2787                         BGE_SETBIT(sc, BGE_MSI_MODE, BGE_MSIMODE_ENABLE);
2788                 }
2789                 val = CSR_READ_4(sc, BGE_MARB_MODE);
2790                 CSR_WRITE_4(sc, BGE_MARB_MODE, BGE_MARBMODE_ENABLE | val);
2791         } else {
2792                 CSR_WRITE_4(sc, BGE_MARB_MODE, BGE_MARBMODE_ENABLE);
2793         }
2794
2795         if (sc->bge_asicrev == BGE_ASICREV_BCM5906) {
2796                 for (i = 0; i < BGE_TIMEOUT; i++) {
2797                         val = CSR_READ_4(sc, BGE_VCPU_STATUS);
2798                         if (val & BGE_VCPU_STATUS_INIT_DONE)
2799                                 break;
2800                         DELAY(100);
2801                 }
2802                 if (i == BGE_TIMEOUT) {
2803                         if_printf(&sc->arpcom.ac_if, "reset timed out\n");
2804                         return;
2805                 }
2806         } else {
2807                 /*
2808                  * Poll until we see the 1's complement of the magic number.
2809                  * This indicates that the firmware initialization
2810                  * is complete.
2811                  */
2812                 for (i = 0; i < BGE_FIRMWARE_TIMEOUT; i++) {
2813                         val = bge_readmem_ind(sc, BGE_SOFTWARE_GENCOMM);
2814                         if (val == ~BGE_MAGIC_NUMBER)
2815                                 break;
2816                         DELAY(10);
2817                 }
2818                 if (i == BGE_FIRMWARE_TIMEOUT) {
2819                         if_printf(&sc->arpcom.ac_if, "firmware handshake "
2820                                   "timed out, found 0x%08x\n", val);
2821                 }
2822         }
2823
2824         /*
2825          * XXX Wait for the value of the PCISTATE register to
2826          * return to its original pre-reset state. This is a
2827          * fairly good indicator of reset completion. If we don't
2828          * wait for the reset to fully complete, trying to read
2829          * from the device's non-PCI registers may yield garbage
2830          * results.
2831          */
2832         for (i = 0; i < BGE_TIMEOUT; i++) {
2833                 if (pci_read_config(dev, BGE_PCI_PCISTATE, 4) == pcistate)
2834                         break;
2835                 DELAY(10);
2836         }
2837
2838         /* Fix up byte swapping */
2839         CSR_WRITE_4(sc, BGE_MODE_CTL, BGE_DMA_SWAP_OPTIONS |
2840             BGE_MODECTL_BYTESWAP_DATA);
2841
2842         CSR_WRITE_4(sc, BGE_MAC_MODE, 0);
2843
2844         /*
2845          * The 5704 in TBI mode apparently needs some special
2846          * adjustment to insure the SERDES drive level is set
2847          * to 1.2V.
2848          */
2849         if (sc->bge_asicrev == BGE_ASICREV_BCM5704 &&
2850             (sc->bge_flags & BGE_FLAG_TBI)) {
2851                 uint32_t serdescfg;
2852
2853                 serdescfg = CSR_READ_4(sc, BGE_SERDES_CFG);
2854                 serdescfg = (serdescfg & ~0xFFF) | 0x880;
2855                 CSR_WRITE_4(sc, BGE_SERDES_CFG, serdescfg);
2856         }
2857
2858         CSR_WRITE_4(sc, BGE_MI_MODE,
2859             sc->bge_mi_mode & ~BGE_MIMODE_AUTOPOLL);
2860         DELAY(80);
2861
2862         /* XXX: Broadcom Linux driver. */
2863         if ((sc->bge_flags & BGE_FLAG_PCIE) &&
2864             sc->bge_chipid != BGE_CHIPID_BCM5750_A0 &&
2865             sc->bge_asicrev != BGE_ASICREV_BCM5785) {
2866                 uint32_t v;
2867
2868                 /* Enable Data FIFO protection. */
2869                 v = CSR_READ_4(sc, BGE_PCIE_TLDLPL_PORT);
2870                 CSR_WRITE_4(sc, BGE_PCIE_TLDLPL_PORT, v | (1 << 25));
2871         }
2872
2873         DELAY(10000);
2874 }
2875
2876 /*
2877  * Frame reception handling. This is called if there's a frame
2878  * on the receive return list.
2879  *
2880  * Note: we have to be able to handle two possibilities here:
2881  * 1) the frame is from the jumbo recieve ring
2882  * 2) the frame is from the standard receive ring
2883  */
2884
2885 static void
2886 bge_rxeof(struct bge_softc *sc, uint16_t rx_prod)
2887 {
2888         struct ifnet *ifp;
2889         int stdcnt = 0, jumbocnt = 0;
2890
2891         ifp = &sc->arpcom.ac_if;
2892
2893         while (sc->bge_rx_saved_considx != rx_prod) {
2894                 struct bge_rx_bd        *cur_rx;
2895                 uint32_t                rxidx;
2896                 struct mbuf             *m = NULL;
2897                 uint16_t                vlan_tag = 0;
2898                 int                     have_tag = 0;
2899
2900                 cur_rx =
2901             &sc->bge_ldata.bge_rx_return_ring[sc->bge_rx_saved_considx];
2902
2903                 rxidx = cur_rx->bge_idx;
2904                 BGE_INC(sc->bge_rx_saved_considx, sc->bge_return_ring_cnt);
2905                 logif(rx_pkt);
2906
2907                 if (cur_rx->bge_flags & BGE_RXBDFLAG_VLAN_TAG) {
2908                         have_tag = 1;
2909                         vlan_tag = cur_rx->bge_vlan_tag;
2910                 }
2911
2912                 if (cur_rx->bge_flags & BGE_RXBDFLAG_JUMBO_RING) {
2913                         BGE_INC(sc->bge_jumbo, BGE_JUMBO_RX_RING_CNT);
2914                         jumbocnt++;
2915
2916                         if (rxidx != sc->bge_jumbo) {
2917                                 ifp->if_ierrors++;
2918                                 if_printf(ifp, "sw jumbo index(%d) "
2919                                     "and hw jumbo index(%d) mismatch, drop!\n",
2920                                     sc->bge_jumbo, rxidx);
2921                                 bge_setup_rxdesc_jumbo(sc, rxidx);
2922                                 continue;
2923                         }
2924
2925                         m = sc->bge_cdata.bge_rx_jumbo_chain[rxidx].bge_mbuf;
2926                         if (cur_rx->bge_flags & BGE_RXBDFLAG_ERROR) {
2927                                 ifp->if_ierrors++;
2928                                 bge_setup_rxdesc_jumbo(sc, sc->bge_jumbo);
2929                                 continue;
2930                         }
2931                         if (bge_newbuf_jumbo(sc, sc->bge_jumbo, 0)) {
2932                                 ifp->if_ierrors++;
2933                                 bge_setup_rxdesc_jumbo(sc, sc->bge_jumbo);
2934                                 continue;
2935                         }
2936                 } else {
2937                         BGE_INC(sc->bge_std, BGE_STD_RX_RING_CNT);
2938                         stdcnt++;
2939
2940                         if (rxidx != sc->bge_std) {
2941                                 ifp->if_ierrors++;
2942                                 if_printf(ifp, "sw std index(%d) "
2943                                     "and hw std index(%d) mismatch, drop!\n",
2944                                     sc->bge_std, rxidx);
2945                                 bge_setup_rxdesc_std(sc, rxidx);
2946                                 continue;
2947                         }
2948
2949                         m = sc->bge_cdata.bge_rx_std_chain[rxidx].bge_mbuf;
2950                         if (cur_rx->bge_flags & BGE_RXBDFLAG_ERROR) {
2951                                 ifp->if_ierrors++;
2952                                 bge_setup_rxdesc_std(sc, sc->bge_std);
2953                                 continue;
2954                         }
2955                         if (bge_newbuf_std(sc, sc->bge_std, 0)) {
2956                                 ifp->if_ierrors++;
2957                                 bge_setup_rxdesc_std(sc, sc->bge_std);
2958                                 continue;
2959                         }
2960                 }
2961
2962                 ifp->if_ipackets++;
2963 #if !defined(__i386__) && !defined(__x86_64__)
2964                 /*
2965                  * The x86 allows unaligned accesses, but for other
2966                  * platforms we must make sure the payload is aligned.
2967                  */
2968                 if (sc->bge_flags & BGE_FLAG_RX_ALIGNBUG) {
2969                         bcopy(m->m_data, m->m_data + ETHER_ALIGN,
2970                             cur_rx->bge_len);
2971                         m->m_data += ETHER_ALIGN;
2972                 }
2973 #endif
2974                 m->m_pkthdr.len = m->m_len = cur_rx->bge_len - ETHER_CRC_LEN;
2975                 m->m_pkthdr.rcvif = ifp;
2976
2977                 if (ifp->if_capenable & IFCAP_RXCSUM) {
2978                         if (cur_rx->bge_flags & BGE_RXBDFLAG_IP_CSUM) {
2979                                 m->m_pkthdr.csum_flags |= CSUM_IP_CHECKED;
2980                                 if ((cur_rx->bge_ip_csum ^ 0xffff) == 0)
2981                                         m->m_pkthdr.csum_flags |= CSUM_IP_VALID;
2982                         }
2983                         if ((cur_rx->bge_flags & BGE_RXBDFLAG_TCP_UDP_CSUM) &&
2984                             m->m_pkthdr.len >= BGE_MIN_FRAMELEN) {
2985                                 m->m_pkthdr.csum_data =
2986                                         cur_rx->bge_tcp_udp_csum;
2987                                 m->m_pkthdr.csum_flags |=
2988                                         CSUM_DATA_VALID | CSUM_PSEUDO_HDR;
2989                         }
2990                 }
2991
2992                 /*
2993                  * If we received a packet with a vlan tag, pass it
2994                  * to vlan_input() instead of ether_input().
2995                  */
2996                 if (have_tag) {
2997                         m->m_flags |= M_VLANTAG;
2998                         m->m_pkthdr.ether_vlantag = vlan_tag;
2999                         have_tag = vlan_tag = 0;
3000                 }
3001                 ifp->if_input(ifp, m);
3002         }
3003
3004         bge_writembx(sc, BGE_MBX_RX_CONS0_LO, sc->bge_rx_saved_considx);
3005         if (stdcnt)
3006                 bge_writembx(sc, BGE_MBX_RX_STD_PROD_LO, sc->bge_std);
3007         if (jumbocnt)
3008                 bge_writembx(sc, BGE_MBX_RX_JUMBO_PROD_LO, sc->bge_jumbo);
3009 }
3010
3011 static void
3012 bge_txeof(struct bge_softc *sc, uint16_t tx_cons)
3013 {
3014         struct ifnet *ifp;
3015
3016         ifp = &sc->arpcom.ac_if;
3017
3018         /*
3019          * Go through our tx ring and free mbufs for those
3020          * frames that have been sent.
3021          */
3022         while (sc->bge_tx_saved_considx != tx_cons) {
3023                 uint32_t idx = 0;
3024
3025                 idx = sc->bge_tx_saved_considx;
3026                 if (sc->bge_cdata.bge_tx_chain[idx] != NULL) {
3027                         ifp->if_opackets++;
3028                         bus_dmamap_unload(sc->bge_cdata.bge_tx_mtag,
3029                             sc->bge_cdata.bge_tx_dmamap[idx]);
3030                         m_freem(sc->bge_cdata.bge_tx_chain[idx]);
3031                         sc->bge_cdata.bge_tx_chain[idx] = NULL;
3032                 }
3033                 sc->bge_txcnt--;
3034                 BGE_INC(sc->bge_tx_saved_considx, BGE_TX_RING_CNT);
3035                 logif(tx_pkt);
3036         }
3037
3038         if ((BGE_TX_RING_CNT - sc->bge_txcnt) >=
3039             (sc->bge_txrsvd + sc->bge_txspare))
3040                 ifp->if_flags &= ~IFF_OACTIVE;
3041
3042         if (sc->bge_txcnt == 0)
3043                 ifp->if_timer = 0;
3044
3045         if (!ifq_is_empty(&ifp->if_snd))
3046                 if_devstart(ifp);
3047 }
3048
3049 #ifdef DEVICE_POLLING
3050
3051 static void
3052 bge_poll(struct ifnet *ifp, enum poll_cmd cmd, int count)
3053 {
3054         struct bge_softc *sc = ifp->if_softc;
3055         struct bge_status_block *sblk = sc->bge_ldata.bge_status_block;
3056         uint16_t rx_prod, tx_cons;
3057
3058         switch(cmd) {
3059         case POLL_REGISTER:
3060                 bge_disable_intr(sc);
3061                 break;
3062         case POLL_DEREGISTER:
3063                 bge_enable_intr(sc);
3064                 break;
3065         case POLL_AND_CHECK_STATUS:
3066                 /*
3067                  * Process link state changes.
3068                  */
3069                 bge_link_poll(sc);
3070                 /* Fall through */
3071         case POLL_ONLY:
3072                 if (sc->bge_flags & BGE_FLAG_STATUS_TAG) {
3073                         sc->bge_status_tag = sblk->bge_status_tag;
3074                         /*
3075                          * Use a load fence to ensure that status_tag
3076                          * is saved  before rx_prod and tx_cons.
3077                          */
3078                         cpu_lfence();
3079                 }
3080                 rx_prod = sblk->bge_idx[0].bge_rx_prod_idx;
3081                 tx_cons = sblk->bge_idx[0].bge_tx_cons_idx;
3082                 if (ifp->if_flags & IFF_RUNNING) {
3083                         rx_prod = sblk->bge_idx[0].bge_rx_prod_idx;
3084                         if (sc->bge_rx_saved_considx != rx_prod)
3085                                 bge_rxeof(sc, rx_prod);
3086
3087                         tx_cons = sblk->bge_idx[0].bge_tx_cons_idx;
3088                         if (sc->bge_tx_saved_considx != tx_cons)
3089                                 bge_txeof(sc, tx_cons);
3090                 }
3091                 break;
3092         }
3093 }
3094
3095 #endif
3096
3097 static void
3098 bge_intr_crippled(void *xsc)
3099 {
3100         struct bge_softc *sc = xsc;
3101         struct ifnet *ifp = &sc->arpcom.ac_if;
3102
3103         logif(intr);
3104
3105         /*
3106          * Ack the interrupt by writing something to BGE_MBX_IRQ0_LO.  Don't
3107          * disable interrupts by writing nonzero like we used to, since with
3108          * our current organization this just gives complications and
3109          * pessimizations for re-enabling interrupts.  We used to have races
3110          * instead of the necessary complications.  Disabling interrupts
3111          * would just reduce the chance of a status update while we are
3112          * running (by switching to the interrupt-mode coalescence
3113          * parameters), but this chance is already very low so it is more
3114          * efficient to get another interrupt than prevent it.
3115          *
3116          * We do the ack first to ensure another interrupt if there is a
3117          * status update after the ack.  We don't check for the status
3118          * changing later because it is more efficient to get another
3119          * interrupt than prevent it, not quite as above (not checking is
3120          * a smaller optimization than not toggling the interrupt enable,
3121          * since checking doesn't involve PCI accesses and toggling require
3122          * the status check).  So toggling would probably be a pessimization
3123          * even with MSI.  It would only be needed for using a task queue.
3124          */
3125         bge_writembx(sc, BGE_MBX_IRQ0_LO, 0);
3126
3127         /*
3128          * Process link state changes.
3129          */
3130         bge_link_poll(sc);
3131
3132         if (ifp->if_flags & IFF_RUNNING) {
3133                 struct bge_status_block *sblk = sc->bge_ldata.bge_status_block;
3134                 uint16_t rx_prod, tx_cons;
3135
3136                 rx_prod = sblk->bge_idx[0].bge_rx_prod_idx;
3137                 if (sc->bge_rx_saved_considx != rx_prod)
3138                         bge_rxeof(sc, rx_prod);
3139
3140                 tx_cons = sblk->bge_idx[0].bge_tx_cons_idx;
3141                 if (sc->bge_tx_saved_considx != tx_cons)
3142                         bge_txeof(sc, tx_cons);
3143         }
3144
3145         if (sc->bge_coal_chg)
3146                 bge_coal_change(sc);
3147 }
3148
3149 static void
3150 bge_intr_legacy(void *xsc)
3151 {
3152         struct bge_softc *sc = xsc;
3153         struct bge_status_block *sblk = sc->bge_ldata.bge_status_block;
3154
3155         if (sc->bge_status_tag == sblk->bge_status_tag) {
3156                 uint32_t val;
3157
3158                 val = pci_read_config(sc->bge_dev, BGE_PCI_PCISTATE, 4);
3159                 if (val & BGE_PCISTAT_INTR_NOTACT)
3160                         return;
3161         }
3162
3163         /*
3164          * NOTE:
3165          * Interrupt will have to be disabled if tagged status
3166          * is used, else interrupt will always be asserted on
3167          * certain chips (at least on BCM5750 AX/BX).
3168          */
3169         bge_writembx(sc, BGE_MBX_IRQ0_LO, 1);
3170
3171         bge_intr(sc);
3172 }
3173
3174 static void
3175 bge_msi(void *xsc)
3176 {
3177         struct bge_softc *sc = xsc;
3178
3179         /* Disable interrupt first */
3180         bge_writembx(sc, BGE_MBX_IRQ0_LO, 1);
3181         bge_intr(sc);
3182 }
3183
3184 static void
3185 bge_msi_oneshot(void *xsc)
3186 {
3187         bge_intr(xsc);
3188 }
3189
3190 static void
3191 bge_intr(struct bge_softc *sc)
3192 {
3193         struct ifnet *ifp = &sc->arpcom.ac_if;
3194         struct bge_status_block *sblk = sc->bge_ldata.bge_status_block;
3195         uint16_t rx_prod, tx_cons;
3196         uint32_t status;
3197
3198         sc->bge_status_tag = sblk->bge_status_tag;
3199         /*
3200          * Use a load fence to ensure that status_tag is saved
3201          * before rx_prod, tx_cons and status.
3202          */
3203         cpu_lfence();
3204
3205         rx_prod = sblk->bge_idx[0].bge_rx_prod_idx;
3206         tx_cons = sblk->bge_idx[0].bge_tx_cons_idx;
3207         status = sblk->bge_status;
3208
3209         if ((status & BGE_STATFLAG_LINKSTATE_CHANGED) || sc->bge_link_evt)
3210                 bge_link_poll(sc);
3211
3212         if (ifp->if_flags & IFF_RUNNING) {
3213                 if (sc->bge_rx_saved_considx != rx_prod)
3214                         bge_rxeof(sc, rx_prod);
3215
3216                 if (sc->bge_tx_saved_considx != tx_cons)
3217                         bge_txeof(sc, tx_cons);
3218         }
3219
3220         bge_writembx(sc, BGE_MBX_IRQ0_LO, sc->bge_status_tag << 24);
3221
3222         if (sc->bge_coal_chg)
3223                 bge_coal_change(sc);
3224 }
3225
3226 static void
3227 bge_tick(void *xsc)
3228 {
3229         struct bge_softc *sc = xsc;
3230         struct ifnet *ifp = &sc->arpcom.ac_if;
3231
3232         lwkt_serialize_enter(ifp->if_serializer);
3233
3234         if (BGE_IS_5705_PLUS(sc))
3235                 bge_stats_update_regs(sc);
3236         else
3237                 bge_stats_update(sc);
3238
3239         if (sc->bge_flags & BGE_FLAG_TBI) {
3240                 /*
3241                  * Since in TBI mode auto-polling can't be used we should poll
3242                  * link status manually. Here we register pending link event
3243                  * and trigger interrupt.
3244                  */
3245                 sc->bge_link_evt++;
3246                 if (BGE_IS_CRIPPLED(sc))
3247                         BGE_SETBIT(sc, BGE_MISC_LOCAL_CTL, BGE_MLC_INTR_SET);
3248                 else
3249                         BGE_SETBIT(sc, BGE_HCC_MODE, BGE_HCCMODE_COAL_NOW);
3250         } else if (!sc->bge_link) {
3251                 mii_tick(device_get_softc(sc->bge_miibus));
3252         }
3253
3254         callout_reset(&sc->bge_stat_timer, hz, bge_tick, sc);
3255
3256         lwkt_serialize_exit(ifp->if_serializer);
3257 }
3258
3259 static void
3260 bge_stats_update_regs(struct bge_softc *sc)
3261 {
3262         struct ifnet *ifp = &sc->arpcom.ac_if;
3263         struct bge_mac_stats_regs stats;
3264         uint32_t *s;
3265         int i;
3266
3267         s = (uint32_t *)&stats;
3268         for (i = 0; i < sizeof(struct bge_mac_stats_regs); i += 4) {
3269                 *s = CSR_READ_4(sc, BGE_RX_STATS + i);
3270                 s++;
3271         }
3272
3273         ifp->if_collisions +=
3274            (stats.dot3StatsSingleCollisionFrames +
3275            stats.dot3StatsMultipleCollisionFrames +
3276            stats.dot3StatsExcessiveCollisions +
3277            stats.dot3StatsLateCollisions) -
3278            ifp->if_collisions;
3279 }
3280
3281 static void
3282 bge_stats_update(struct bge_softc *sc)
3283 {
3284         struct ifnet *ifp = &sc->arpcom.ac_if;
3285         bus_size_t stats;
3286
3287         stats = BGE_MEMWIN_START + BGE_STATS_BLOCK;
3288
3289 #define READ_STAT(sc, stats, stat)      \
3290         CSR_READ_4(sc, stats + offsetof(struct bge_stats, stat))
3291
3292         ifp->if_collisions +=
3293            (READ_STAT(sc, stats,
3294                 txstats.dot3StatsSingleCollisionFrames.bge_addr_lo) +
3295             READ_STAT(sc, stats,
3296                 txstats.dot3StatsMultipleCollisionFrames.bge_addr_lo) +
3297             READ_STAT(sc, stats,
3298                 txstats.dot3StatsExcessiveCollisions.bge_addr_lo) +
3299             READ_STAT(sc, stats,
3300                 txstats.dot3StatsLateCollisions.bge_addr_lo)) -
3301            ifp->if_collisions;
3302
3303 #undef READ_STAT
3304
3305 #ifdef notdef
3306         ifp->if_collisions +=
3307            (sc->bge_rdata->bge_info.bge_stats.dot3StatsSingleCollisionFrames +
3308            sc->bge_rdata->bge_info.bge_stats.dot3StatsMultipleCollisionFrames +
3309            sc->bge_rdata->bge_info.bge_stats.dot3StatsExcessiveCollisions +
3310            sc->bge_rdata->bge_info.bge_stats.dot3StatsLateCollisions) -
3311            ifp->if_collisions;
3312 #endif
3313 }
3314
3315 /*
3316  * Encapsulate an mbuf chain in the tx ring  by coupling the mbuf data
3317  * pointers to descriptors.
3318  */
3319 static int
3320 bge_encap(struct bge_softc *sc, struct mbuf **m_head0, uint32_t *txidx)
3321 {
3322         struct bge_tx_bd *d = NULL, *last_d;
3323         uint16_t csum_flags = 0, mss = 0;
3324         bus_dma_segment_t segs[BGE_NSEG_NEW];
3325         bus_dmamap_t map;
3326         int error, maxsegs, nsegs, idx, i;
3327         struct mbuf *m_head = *m_head0, *m_new;
3328
3329         if (m_head->m_pkthdr.csum_flags & CSUM_TSO) {
3330                 error = bge_setup_tso(sc, m_head0, &mss, &csum_flags);
3331                 if (error)
3332                         return ENOBUFS;
3333                 m_head = *m_head0;
3334         } else if (m_head->m_pkthdr.csum_flags & BGE_CSUM_FEATURES) {
3335                 if (m_head->m_pkthdr.csum_flags & CSUM_IP)
3336                         csum_flags |= BGE_TXBDFLAG_IP_CSUM;
3337                 if (m_head->m_pkthdr.csum_flags & (CSUM_TCP | CSUM_UDP))
3338                         csum_flags |= BGE_TXBDFLAG_TCP_UDP_CSUM;
3339                 if (m_head->m_flags & M_LASTFRAG)
3340                         csum_flags |= BGE_TXBDFLAG_IP_FRAG_END;
3341                 else if (m_head->m_flags & M_FRAG)
3342                         csum_flags |= BGE_TXBDFLAG_IP_FRAG;
3343         }
3344
3345         idx = *txidx;
3346         map = sc->bge_cdata.bge_tx_dmamap[idx];
3347
3348         maxsegs = (BGE_TX_RING_CNT - sc->bge_txcnt) - sc->bge_txrsvd;
3349         KASSERT(maxsegs >= sc->bge_txspare,
3350                 ("not enough segments %d", maxsegs));
3351
3352         if (maxsegs > BGE_NSEG_NEW)
3353                 maxsegs = BGE_NSEG_NEW;
3354
3355         /*
3356          * Pad outbound frame to BGE_MIN_FRAMELEN for an unusual reason.
3357          * The bge hardware will pad out Tx runts to BGE_MIN_FRAMELEN,
3358          * but when such padded frames employ the bge IP/TCP checksum
3359          * offload, the hardware checksum assist gives incorrect results
3360          * (possibly from incorporating its own padding into the UDP/TCP
3361          * checksum; who knows).  If we pad such runts with zeros, the
3362          * onboard checksum comes out correct.
3363          */
3364         if ((csum_flags & BGE_TXBDFLAG_TCP_UDP_CSUM) &&
3365             m_head->m_pkthdr.len < BGE_MIN_FRAMELEN) {
3366                 error = m_devpad(m_head, BGE_MIN_FRAMELEN);
3367                 if (error)
3368                         goto back;
3369         }
3370
3371         if ((sc->bge_flags & BGE_FLAG_SHORTDMA) && m_head->m_next != NULL) {
3372                 m_new = bge_defrag_shortdma(m_head);
3373                 if (m_new == NULL) {
3374                         error = ENOBUFS;
3375                         goto back;
3376                 }
3377                 *m_head0 = m_head = m_new;
3378         }
3379         if ((m_head->m_pkthdr.csum_flags & CSUM_TSO) == 0 &&
3380             sc->bge_force_defrag && (sc->bge_flags & BGE_FLAG_PCIE) &&
3381             m_head->m_next != NULL) {
3382                 /*
3383                  * Forcefully defragment mbuf chain to overcome hardware
3384                  * limitation which only support a single outstanding
3385                  * DMA read operation.  If it fails, keep moving on using
3386                  * the original mbuf chain.
3387                  */
3388                 m_new = m_defrag(m_head, MB_DONTWAIT);
3389                 if (m_new != NULL)
3390                         *m_head0 = m_head = m_new;
3391         }
3392
3393         error = bus_dmamap_load_mbuf_defrag(sc->bge_cdata.bge_tx_mtag, map,
3394                         m_head0, segs, maxsegs, &nsegs, BUS_DMA_NOWAIT);
3395         if (error)
3396                 goto back;
3397
3398         m_head = *m_head0;
3399         bus_dmamap_sync(sc->bge_cdata.bge_tx_mtag, map, BUS_DMASYNC_PREWRITE);
3400
3401         for (i = 0; ; i++) {
3402                 d = &sc->bge_ldata.bge_tx_ring[idx];
3403
3404                 d->bge_addr.bge_addr_lo = BGE_ADDR_LO(segs[i].ds_addr);
3405                 d->bge_addr.bge_addr_hi = BGE_ADDR_HI(segs[i].ds_addr);
3406                 d->bge_len = segs[i].ds_len;
3407                 d->bge_flags = csum_flags;
3408                 d->bge_mss = mss;
3409
3410                 if (i == nsegs - 1)
3411                         break;
3412                 BGE_INC(idx, BGE_TX_RING_CNT);
3413         }
3414         last_d = d;
3415
3416         /* Set vlan tag to the first segment of the packet. */
3417         d = &sc->bge_ldata.bge_tx_ring[*txidx];
3418         if (m_head->m_flags & M_VLANTAG) {
3419                 d->bge_flags |= BGE_TXBDFLAG_VLAN_TAG;
3420                 d->bge_vlan_tag = m_head->m_pkthdr.ether_vlantag;
3421         } else {
3422                 d->bge_vlan_tag = 0;
3423         }
3424
3425         /* Mark the last segment as end of packet... */
3426         last_d->bge_flags |= BGE_TXBDFLAG_END;
3427
3428         /*
3429          * Insure that the map for this transmission is placed at
3430          * the array index of the last descriptor in this chain.
3431          */
3432         sc->bge_cdata.bge_tx_dmamap[*txidx] = sc->bge_cdata.bge_tx_dmamap[idx];
3433         sc->bge_cdata.bge_tx_dmamap[idx] = map;
3434         sc->bge_cdata.bge_tx_chain[idx] = m_head;
3435         sc->bge_txcnt += nsegs;
3436
3437         BGE_INC(idx, BGE_TX_RING_CNT);
3438         *txidx = idx;
3439 back:
3440         if (error) {
3441                 m_freem(*m_head0);
3442                 *m_head0 = NULL;
3443         }
3444         return error;
3445 }
3446
3447 /*
3448  * Main transmit routine. To avoid having to do mbuf copies, we put pointers
3449  * to the mbuf data regions directly in the transmit descriptors.
3450  */
3451 static void
3452 bge_start(struct ifnet *ifp)
3453 {
3454         struct bge_softc *sc = ifp->if_softc;
3455         struct mbuf *m_head = NULL;
3456         uint32_t prodidx;
3457         int need_trans;
3458
3459         if ((ifp->if_flags & (IFF_RUNNING | IFF_OACTIVE)) != IFF_RUNNING)
3460                 return;
3461
3462         prodidx = sc->bge_tx_prodidx;
3463
3464         need_trans = 0;
3465         while (sc->bge_cdata.bge_tx_chain[prodidx] == NULL) {
3466                 m_head = ifq_dequeue(&ifp->if_snd, NULL);
3467                 if (m_head == NULL)
3468                         break;
3469
3470                 /*
3471                  * XXX
3472                  * The code inside the if() block is never reached since we
3473                  * must mark CSUM_IP_FRAGS in our if_hwassist to start getting
3474                  * requests to checksum TCP/UDP in a fragmented packet.
3475                  *
3476                  * XXX
3477                  * safety overkill.  If this is a fragmented packet chain
3478                  * with delayed TCP/UDP checksums, then only encapsulate
3479                  * it if we have enough descriptors to handle the entire
3480                  * chain at once.
3481                  * (paranoia -- may not actually be needed)
3482                  */
3483                 if ((m_head->m_flags & M_FIRSTFRAG) &&
3484                     (m_head->m_pkthdr.csum_flags & CSUM_DELAY_DATA)) {
3485                         if ((BGE_TX_RING_CNT - sc->bge_txcnt) <
3486                             m_head->m_pkthdr.csum_data + sc->bge_txrsvd) {
3487                                 ifp->if_flags |= IFF_OACTIVE;
3488                                 ifq_prepend(&ifp->if_snd, m_head);
3489                                 break;
3490                         }
3491                 }
3492
3493                 /*
3494                  * Sanity check: avoid coming within bge_txrsvd
3495                  * descriptors of the end of the ring.  Also make
3496                  * sure there are bge_txspare descriptors for
3497                  * jumbo buffers' defragmentation.
3498                  */
3499                 if ((BGE_TX_RING_CNT - sc->bge_txcnt) <
3500                     (sc->bge_txrsvd + sc->bge_txspare)) {
3501                         ifp->if_flags |= IFF_OACTIVE;
3502                         ifq_prepend(&ifp->if_snd, m_head);
3503                         break;
3504                 }
3505
3506                 /*
3507                  * Pack the data into the transmit ring. If we
3508                  * don't have room, set the OACTIVE flag and wait
3509                  * for the NIC to drain the ring.
3510                  */
3511                 if (bge_encap(sc, &m_head, &prodidx)) {
3512                         ifp->if_flags |= IFF_OACTIVE;
3513                         ifp->if_oerrors++;
3514                         break;
3515                 }
3516                 need_trans = 1;
3517
3518                 ETHER_BPF_MTAP(ifp, m_head);
3519         }
3520
3521         if (!need_trans)
3522                 return;
3523
3524         /* Transmit */
3525         bge_writembx(sc, BGE_MBX_TX_HOST_PROD0_LO, prodidx);
3526         /* 5700 b2 errata */
3527         if (sc->bge_chiprev == BGE_CHIPREV_5700_BX)
3528                 bge_writembx(sc, BGE_MBX_TX_HOST_PROD0_LO, prodidx);
3529
3530         sc->bge_tx_prodidx = prodidx;
3531
3532         /*
3533          * Set a timeout in case the chip goes out to lunch.
3534          */
3535         ifp->if_timer = 5;
3536 }
3537
3538 static void
3539 bge_init(void *xsc)
3540 {
3541         struct bge_softc *sc = xsc;
3542         struct ifnet *ifp = &sc->arpcom.ac_if;
3543         uint16_t *m;
3544         uint32_t mode;
3545
3546         ASSERT_SERIALIZED(ifp->if_serializer);
3547
3548         /* Cancel pending I/O and flush buffers. */
3549         bge_stop(sc);
3550         bge_reset(sc);
3551         bge_chipinit(sc);
3552
3553         /*
3554          * Init the various state machines, ring
3555          * control blocks and firmware.
3556          */
3557         if (bge_blockinit(sc)) {
3558                 if_printf(ifp, "initialization failure\n");
3559                 bge_stop(sc);
3560                 return;
3561         }
3562
3563         /* Specify MTU. */
3564         CSR_WRITE_4(sc, BGE_RX_MTU, ifp->if_mtu +
3565             ETHER_HDR_LEN + ETHER_CRC_LEN + EVL_ENCAPLEN);
3566
3567         /* Load our MAC address. */
3568         m = (uint16_t *)&sc->arpcom.ac_enaddr[0];
3569         CSR_WRITE_4(sc, BGE_MAC_ADDR1_LO, htons(m[0]));
3570         CSR_WRITE_4(sc, BGE_MAC_ADDR1_HI, (htons(m[1]) << 16) | htons(m[2]));
3571
3572         /* Enable or disable promiscuous mode as needed. */
3573         bge_setpromisc(sc);
3574
3575         /* Program multicast filter. */
3576         bge_setmulti(sc);
3577
3578         /* Init RX ring. */
3579         if (bge_init_rx_ring_std(sc)) {
3580                 if_printf(ifp, "RX ring initialization failed\n");
3581                 bge_stop(sc);
3582                 return;
3583         }
3584
3585         /*
3586          * Workaround for a bug in 5705 ASIC rev A0. Poll the NIC's
3587          * memory to insure that the chip has in fact read the first
3588          * entry of the ring.
3589          */
3590         if (sc->bge_chipid == BGE_CHIPID_BCM5705_A0) {
3591                 uint32_t                v, i;
3592                 for (i = 0; i < 10; i++) {
3593                         DELAY(20);
3594                         v = bge_readmem_ind(sc, BGE_STD_RX_RINGS + 8);
3595                         if (v == (MCLBYTES - ETHER_ALIGN))
3596                                 break;
3597                 }
3598                 if (i == 10)
3599                         if_printf(ifp, "5705 A0 chip failed to load RX ring\n");
3600         }
3601
3602         /* Init jumbo RX ring. */
3603         if (ifp->if_mtu > (ETHERMTU + ETHER_HDR_LEN + ETHER_CRC_LEN)) {
3604                 if (bge_init_rx_ring_jumbo(sc)) {
3605                         if_printf(ifp, "Jumbo RX ring initialization failed\n");
3606                         bge_stop(sc);
3607                         return;
3608                 }
3609         }
3610
3611         /* Init our RX return ring index */
3612         sc->bge_rx_saved_considx = 0;
3613
3614         /* Init TX ring. */
3615         bge_init_tx_ring(sc);
3616
3617         /* Enable TX MAC state machine lockup fix. */
3618         mode = CSR_READ_4(sc, BGE_TX_MODE);
3619         if (BGE_IS_5755_PLUS(sc) || sc->bge_asicrev == BGE_ASICREV_BCM5906)
3620                 mode |= BGE_TXMODE_MBUF_LOCKUP_FIX;
3621         /* Turn on transmitter */
3622         CSR_WRITE_4(sc, BGE_TX_MODE, mode | BGE_TXMODE_ENABLE);
3623
3624         /* Turn on receiver */
3625         BGE_SETBIT(sc, BGE_RX_MODE, BGE_RXMODE_ENABLE);
3626
3627         /*
3628          * Set the number of good frames to receive after RX MBUF
3629          * Low Watermark has been reached.  After the RX MAC receives
3630          * this number of frames, it will drop subsequent incoming
3631          * frames until the MBUF High Watermark is reached.
3632          */
3633         CSR_WRITE_4(sc, BGE_MAX_RX_FRAME_LOWAT, 2);
3634
3635         if (sc->bge_irq_type == PCI_INTR_TYPE_MSI) {
3636                 if (bootverbose) {
3637                         if_printf(ifp, "MSI_MODE: %#x\n",
3638                             CSR_READ_4(sc, BGE_MSI_MODE));
3639                 }
3640
3641                 /*
3642                  * XXX
3643                  * Linux driver turns it on for all chips supporting MSI?!
3644                  */
3645                 if (sc->bge_flags & BGE_FLAG_ONESHOT_MSI) {
3646                         /*
3647                          * XXX
3648                          * According to 5722-PG101-R,
3649                          * BGE_PCIE_TRANSACT_ONESHOT_MSI applies only to
3650                          * BCM5906.
3651                          */
3652                         BGE_SETBIT(sc, BGE_PCIE_TRANSACT,
3653                             BGE_PCIE_TRANSACT_ONESHOT_MSI);
3654                 }
3655         }
3656
3657         /* Tell firmware we're alive. */
3658         BGE_SETBIT(sc, BGE_MODE_CTL, BGE_MODECTL_STACKUP);
3659
3660         /* Enable host interrupts if polling(4) is not enabled. */
3661         PCI_SETBIT(sc->bge_dev, BGE_PCI_MISC_CTL, BGE_PCIMISCCTL_CLEAR_INTA, 4);
3662 #ifdef DEVICE_POLLING
3663         if (ifp->if_flags & IFF_POLLING)
3664                 bge_disable_intr(sc);
3665         else
3666 #endif
3667         bge_enable_intr(sc);
3668
3669         bge_ifmedia_upd(ifp);
3670
3671         ifp->if_flags |= IFF_RUNNING;
3672         ifp->if_flags &= ~IFF_OACTIVE;
3673
3674         callout_reset(&sc->bge_stat_timer, hz, bge_tick, sc);
3675 }
3676
3677 /*
3678  * Set media options.
3679  */
3680 static int
3681 bge_ifmedia_upd(struct ifnet *ifp)
3682 {
3683         struct bge_softc *sc = ifp->if_softc;
3684
3685         /* If this is a 1000baseX NIC, enable the TBI port. */
3686         if (sc->bge_flags & BGE_FLAG_TBI) {
3687                 struct ifmedia *ifm = &sc->bge_ifmedia;
3688
3689                 if (IFM_TYPE(ifm->ifm_media) != IFM_ETHER)
3690                         return(EINVAL);
3691
3692                 switch(IFM_SUBTYPE(ifm->ifm_media)) {
3693                 case IFM_AUTO:
3694                         /*
3695                          * The BCM5704 ASIC appears to have a special
3696                          * mechanism for programming the autoneg
3697                          * advertisement registers in TBI mode.
3698                          */
3699                         if (!bge_fake_autoneg &&
3700                             sc->bge_asicrev == BGE_ASICREV_BCM5704) {
3701                                 uint32_t sgdig;
3702
3703                                 CSR_WRITE_4(sc, BGE_TX_TBI_AUTONEG, 0);
3704                                 sgdig = CSR_READ_4(sc, BGE_SGDIG_CFG);
3705                                 sgdig |= BGE_SGDIGCFG_AUTO |
3706                                          BGE_SGDIGCFG_PAUSE_CAP |
3707                                          BGE_SGDIGCFG_ASYM_PAUSE;
3708                                 CSR_WRITE_4(sc, BGE_SGDIG_CFG,
3709                                             sgdig | BGE_SGDIGCFG_SEND);
3710                                 DELAY(5);
3711                                 CSR_WRITE_4(sc, BGE_SGDIG_CFG, sgdig);
3712                         }
3713                         break;
3714                 case IFM_1000_SX:
3715                         if ((ifm->ifm_media & IFM_GMASK) == IFM_FDX) {
3716                                 BGE_CLRBIT(sc, BGE_MAC_MODE,
3717                                     BGE_MACMODE_HALF_DUPLEX);
3718                         } else {
3719                                 BGE_SETBIT(sc, BGE_MAC_MODE,
3720                                     BGE_MACMODE_HALF_DUPLEX);
3721                         }
3722                         break;
3723                 default:
3724                         return(EINVAL);
3725                 }
3726         } else {
3727                 struct mii_data *mii = device_get_softc(sc->bge_miibus);
3728
3729                 sc->bge_link_evt++;
3730                 sc->bge_link = 0;
3731                 if (mii->mii_instance) {
3732                         struct mii_softc *miisc;
3733
3734                         LIST_FOREACH(miisc, &mii->mii_phys, mii_list)
3735                                 mii_phy_reset(miisc);
3736                 }
3737                 mii_mediachg(mii);
3738
3739                 /*
3740                  * Force an interrupt so that we will call bge_link_upd
3741                  * if needed and clear any pending link state attention.
3742                  * Without this we are not getting any further interrupts
3743                  * for link state changes and thus will not UP the link and
3744                  * not be able to send in bge_start.  The only way to get
3745                  * things working was to receive a packet and get an RX
3746                  * intr.
3747                  *
3748                  * bge_tick should help for fiber cards and we might not
3749                  * need to do this here if BGE_FLAG_TBI is set but as
3750                  * we poll for fiber anyway it should not harm.
3751                  */
3752                 if (BGE_IS_CRIPPLED(sc))
3753                         BGE_SETBIT(sc, BGE_MISC_LOCAL_CTL, BGE_MLC_INTR_SET);
3754                 else
3755                         BGE_SETBIT(sc, BGE_HCC_MODE, BGE_HCCMODE_COAL_NOW);
3756         }
3757         return(0);
3758 }
3759
3760 /*
3761  * Report current media status.
3762  */
3763 static void
3764 bge_ifmedia_sts(struct ifnet *ifp, struct ifmediareq *ifmr)
3765 {
3766         struct bge_softc *sc = ifp->if_softc;
3767
3768         if (sc->bge_flags & BGE_FLAG_TBI) {
3769                 ifmr->ifm_status = IFM_AVALID;
3770                 ifmr->ifm_active = IFM_ETHER;
3771                 if (CSR_READ_4(sc, BGE_MAC_STS) &
3772                     BGE_MACSTAT_TBI_PCS_SYNCHED) {
3773                         ifmr->ifm_status |= IFM_ACTIVE;
3774                 } else {
3775                         ifmr->ifm_active |= IFM_NONE;
3776                         return;
3777                 }
3778
3779                 ifmr->ifm_active |= IFM_1000_SX;
3780                 if (CSR_READ_4(sc, BGE_MAC_MODE) & BGE_MACMODE_HALF_DUPLEX)
3781                         ifmr->ifm_active |= IFM_HDX;
3782                 else
3783                         ifmr->ifm_active |= IFM_FDX;
3784         } else {
3785                 struct mii_data *mii = device_get_softc(sc->bge_miibus);
3786
3787                 mii_pollstat(mii);
3788                 ifmr->ifm_active = mii->mii_media_active;
3789                 ifmr->ifm_status = mii->mii_media_status;
3790         }
3791 }
3792
3793 static int
3794 bge_ioctl(struct ifnet *ifp, u_long command, caddr_t data, struct ucred *cr)
3795 {
3796         struct bge_softc *sc = ifp->if_softc;
3797         struct ifreq *ifr = (struct ifreq *)data;
3798         int mask, error = 0;
3799
3800         ASSERT_SERIALIZED(ifp->if_serializer);
3801
3802         switch (command) {
3803         case SIOCSIFMTU:
3804                 if ((!BGE_IS_JUMBO_CAPABLE(sc) && ifr->ifr_mtu > ETHERMTU) ||
3805                     (BGE_IS_JUMBO_CAPABLE(sc) &&
3806                      ifr->ifr_mtu > BGE_JUMBO_MTU)) {
3807                         error = EINVAL;
3808                 } else if (ifp->if_mtu != ifr->ifr_mtu) {
3809                         ifp->if_mtu = ifr->ifr_mtu;
3810                         if (ifp->if_flags & IFF_RUNNING)
3811                                 bge_init(sc);
3812                 }
3813                 break;
3814         case SIOCSIFFLAGS:
3815                 if (ifp->if_flags & IFF_UP) {
3816                         if (ifp->if_flags & IFF_RUNNING) {
3817                                 mask = ifp->if_flags ^ sc->bge_if_flags;
3818
3819                                 /*
3820                                  * If only the state of the PROMISC flag
3821                                  * changed, then just use the 'set promisc
3822                                  * mode' command instead of reinitializing
3823                                  * the entire NIC. Doing a full re-init
3824                                  * means reloading the firmware and waiting
3825                                  * for it to start up, which may take a
3826                                  * second or two.  Similarly for ALLMULTI.
3827                                  */
3828                                 if (mask & IFF_PROMISC)
3829                                         bge_setpromisc(sc);
3830                                 if (mask & IFF_ALLMULTI)
3831                                         bge_setmulti(sc);
3832                         } else {
3833                                 bge_init(sc);
3834                         }
3835                 } else if (ifp->if_flags & IFF_RUNNING) {
3836                         bge_stop(sc);
3837                 }
3838                 sc->bge_if_flags = ifp->if_flags;
3839                 break;
3840         case SIOCADDMULTI:
3841         case SIOCDELMULTI:
3842                 if (ifp->if_flags & IFF_RUNNING)
3843                         bge_setmulti(sc);
3844                 break;
3845         case SIOCSIFMEDIA:
3846         case SIOCGIFMEDIA:
3847                 if (sc->bge_flags & BGE_FLAG_TBI) {
3848                         error = ifmedia_ioctl(ifp, ifr,
3849                             &sc->bge_ifmedia, command);
3850                 } else {
3851                         struct mii_data *mii;
3852
3853                         mii = device_get_softc(sc->bge_miibus);
3854                         error = ifmedia_ioctl(ifp, ifr,
3855                                               &mii->mii_media, command);
3856                 }
3857                 break;
3858         case SIOCSIFCAP:
3859                 mask = ifr->ifr_reqcap ^ ifp->if_capenable;
3860                 if (mask & IFCAP_HWCSUM) {
3861                         ifp->if_capenable ^= (mask & IFCAP_HWCSUM);
3862                         if (ifp->if_capenable & IFCAP_TXCSUM)
3863                                 ifp->if_hwassist |= BGE_CSUM_FEATURES;
3864                         else
3865                                 ifp->if_hwassist &= ~BGE_CSUM_FEATURES;
3866                 }
3867                 if (mask & IFCAP_TSO) {
3868                         ifp->if_capenable ^= IFCAP_TSO;
3869                         if (ifp->if_capenable & IFCAP_TSO)
3870                                 ifp->if_hwassist |= CSUM_TSO;
3871                         else
3872                                 ifp->if_hwassist &= ~CSUM_TSO;
3873                 }
3874                 break;
3875         default:
3876                 error = ether_ioctl(ifp, command, data);
3877                 break;
3878         }
3879         return error;
3880 }
3881
3882 static void
3883 bge_watchdog(struct ifnet *ifp)
3884 {
3885         struct bge_softc *sc = ifp->if_softc;
3886
3887         if_printf(ifp, "watchdog timeout -- resetting\n");
3888
3889         bge_init(sc);
3890
3891         ifp->if_oerrors++;
3892
3893         if (!ifq_is_empty(&ifp->if_snd))
3894                 if_devstart(ifp);
3895 }
3896
3897 /*
3898  * Stop the adapter and free any mbufs allocated to the
3899  * RX and TX lists.
3900  */
3901 static void
3902 bge_stop(struct bge_softc *sc)
3903 {
3904         struct ifnet *ifp = &sc->arpcom.ac_if;
3905
3906         ASSERT_SERIALIZED(ifp->if_serializer);
3907
3908         callout_stop(&sc->bge_stat_timer);
3909
3910         /*
3911          * Disable all of the receiver blocks
3912          */
3913         bge_stop_block(sc, BGE_RX_MODE, BGE_RXMODE_ENABLE);
3914         bge_stop_block(sc, BGE_RBDI_MODE, BGE_RBDIMODE_ENABLE);
3915         bge_stop_block(sc, BGE_RXLP_MODE, BGE_RXLPMODE_ENABLE);
3916         if (BGE_IS_5700_FAMILY(sc))
3917                 bge_stop_block(sc, BGE_RXLS_MODE, BGE_RXLSMODE_ENABLE);
3918         bge_stop_block(sc, BGE_RDBDI_MODE, BGE_RBDIMODE_ENABLE);
3919         bge_stop_block(sc, BGE_RDC_MODE, BGE_RDCMODE_ENABLE);
3920         bge_stop_block(sc, BGE_RBDC_MODE, BGE_RBDCMODE_ENABLE);
3921
3922         /*
3923          * Disable all of the transmit blocks
3924          */
3925         bge_stop_block(sc, BGE_SRS_MODE, BGE_SRSMODE_ENABLE);
3926         bge_stop_block(sc, BGE_SBDI_MODE, BGE_SBDIMODE_ENABLE);
3927         bge_stop_block(sc, BGE_SDI_MODE, BGE_SDIMODE_ENABLE);
3928         bge_stop_block(sc, BGE_RDMA_MODE, BGE_RDMAMODE_ENABLE);
3929         bge_stop_block(sc, BGE_SDC_MODE, BGE_SDCMODE_ENABLE);
3930         if (BGE_IS_5700_FAMILY(sc))
3931                 bge_stop_block(sc, BGE_DMAC_MODE, BGE_DMACMODE_ENABLE);
3932         bge_stop_block(sc, BGE_SBDC_MODE, BGE_SBDCMODE_ENABLE);
3933
3934         /*
3935          * Shut down all of the memory managers and related
3936          * state machines.
3937          */
3938         bge_stop_block(sc, BGE_HCC_MODE, BGE_HCCMODE_ENABLE);
3939         bge_stop_block(sc, BGE_WDMA_MODE, BGE_WDMAMODE_ENABLE);
3940         if (BGE_IS_5700_FAMILY(sc))
3941                 bge_stop_block(sc, BGE_MBCF_MODE, BGE_MBCFMODE_ENABLE);
3942         CSR_WRITE_4(sc, BGE_FTQ_RESET, 0xFFFFFFFF);
3943         CSR_WRITE_4(sc, BGE_FTQ_RESET, 0);
3944         if (!BGE_IS_5705_PLUS(sc)) {
3945                 BGE_CLRBIT(sc, BGE_BMAN_MODE, BGE_BMANMODE_ENABLE);
3946                 BGE_CLRBIT(sc, BGE_MARB_MODE, BGE_MARBMODE_ENABLE);
3947         }
3948
3949         /* Disable host interrupts. */
3950         bge_disable_intr(sc);
3951
3952         /*
3953          * Tell firmware we're shutting down.
3954          */
3955         BGE_CLRBIT(sc, BGE_MODE_CTL, BGE_MODECTL_STACKUP);
3956
3957         /* Free the RX lists. */
3958         bge_free_rx_ring_std(sc);
3959
3960         /* Free jumbo RX list. */
3961         if (BGE_IS_JUMBO_CAPABLE(sc))
3962                 bge_free_rx_ring_jumbo(sc);
3963
3964         /* Free TX buffers. */
3965         bge_free_tx_ring(sc);
3966
3967         sc->bge_status_tag = 0;
3968         sc->bge_link = 0;
3969         sc->bge_coal_chg = 0;
3970
3971         sc->bge_tx_saved_considx = BGE_TXCONS_UNSET;
3972
3973         ifp->if_flags &= ~(IFF_RUNNING | IFF_OACTIVE);
3974         ifp->if_timer = 0;
3975 }
3976
3977 /*
3978  * Stop all chip I/O so that the kernel's probe routines don't
3979  * get confused by errant DMAs when rebooting.
3980  */
3981 static void
3982 bge_shutdown(device_t dev)
3983 {
3984         struct bge_softc *sc = device_get_softc(dev);
3985         struct ifnet *ifp = &sc->arpcom.ac_if;
3986
3987         lwkt_serialize_enter(ifp->if_serializer);
3988         bge_stop(sc);
3989         bge_reset(sc);
3990         lwkt_serialize_exit(ifp->if_serializer);
3991 }
3992
3993 static int
3994 bge_suspend(device_t dev)
3995 {
3996         struct bge_softc *sc = device_get_softc(dev);
3997         struct ifnet *ifp = &sc->arpcom.ac_if;
3998
3999         lwkt_serialize_enter(ifp->if_serializer);
4000         bge_stop(sc);
4001         lwkt_serialize_exit(ifp->if_serializer);
4002
4003         return 0;
4004 }
4005
4006 static int
4007 bge_resume(device_t dev)
4008 {
4009         struct bge_softc *sc = device_get_softc(dev);
4010         struct ifnet *ifp = &sc->arpcom.ac_if;
4011
4012         lwkt_serialize_enter(ifp->if_serializer);
4013
4014         if (ifp->if_flags & IFF_UP) {
4015                 bge_init(sc);
4016
4017                 if (!ifq_is_empty(&ifp->if_snd))
4018                         if_devstart(ifp);
4019         }
4020
4021         lwkt_serialize_exit(ifp->if_serializer);
4022
4023         return 0;
4024 }
4025
4026 static void
4027 bge_setpromisc(struct bge_softc *sc)
4028 {
4029         struct ifnet *ifp = &sc->arpcom.ac_if;
4030
4031         if (ifp->if_flags & IFF_PROMISC)
4032                 BGE_SETBIT(sc, BGE_RX_MODE, BGE_RXMODE_RX_PROMISC);
4033         else
4034                 BGE_CLRBIT(sc, BGE_RX_MODE, BGE_RXMODE_RX_PROMISC);
4035 }
4036
4037 static void
4038 bge_dma_free(struct bge_softc *sc)
4039 {
4040         int i;
4041
4042         /* Destroy RX mbuf DMA stuffs. */
4043         if (sc->bge_cdata.bge_rx_mtag != NULL) {
4044                 for (i = 0; i < BGE_STD_RX_RING_CNT; i++) {
4045                         bus_dmamap_destroy(sc->bge_cdata.bge_rx_mtag,
4046                             sc->bge_cdata.bge_rx_std_dmamap[i]);
4047                 }
4048                 bus_dmamap_destroy(sc->bge_cdata.bge_rx_mtag,
4049                                    sc->bge_cdata.bge_rx_tmpmap);
4050                 bus_dma_tag_destroy(sc->bge_cdata.bge_rx_mtag);
4051         }
4052
4053         /* Destroy TX mbuf DMA stuffs. */
4054         if (sc->bge_cdata.bge_tx_mtag != NULL) {
4055                 for (i = 0; i < BGE_TX_RING_CNT; i++) {
4056                         bus_dmamap_destroy(sc->bge_cdata.bge_tx_mtag,
4057                             sc->bge_cdata.bge_tx_dmamap[i]);
4058                 }
4059                 bus_dma_tag_destroy(sc->bge_cdata.bge_tx_mtag);
4060         }
4061
4062         /* Destroy standard RX ring */
4063         bge_dma_block_free(sc->bge_cdata.bge_rx_std_ring_tag,
4064                            sc->bge_cdata.bge_rx_std_ring_map,
4065                            sc->bge_ldata.bge_rx_std_ring);
4066
4067         if (BGE_IS_JUMBO_CAPABLE(sc))
4068                 bge_free_jumbo_mem(sc);
4069
4070         /* Destroy RX return ring */
4071         bge_dma_block_free(sc->bge_cdata.bge_rx_return_ring_tag,
4072                            sc->bge_cdata.bge_rx_return_ring_map,
4073                            sc->bge_ldata.bge_rx_return_ring);
4074
4075         /* Destroy TX ring */
4076         bge_dma_block_free(sc->bge_cdata.bge_tx_ring_tag,
4077                            sc->bge_cdata.bge_tx_ring_map,
4078                            sc->bge_ldata.bge_tx_ring);
4079
4080         /* Destroy status block */
4081         bge_dma_block_free(sc->bge_cdata.bge_status_tag,
4082                            sc->bge_cdata.bge_status_map,
4083                            sc->bge_ldata.bge_status_block);
4084
4085         /* Destroy statistics block */
4086         bge_dma_block_free(sc->bge_cdata.bge_stats_tag,
4087                            sc->bge_cdata.bge_stats_map,
4088                            sc->bge_ldata.bge_stats);
4089
4090         /* Destroy the parent tag */
4091         if (sc->bge_cdata.bge_parent_tag != NULL)
4092                 bus_dma_tag_destroy(sc->bge_cdata.bge_parent_tag);
4093 }
4094
4095 static int
4096 bge_dma_alloc(struct bge_softc *sc)
4097 {
4098         struct ifnet *ifp = &sc->arpcom.ac_if;
4099         int i, error;
4100         bus_addr_t lowaddr;
4101         bus_size_t txmaxsz;
4102
4103         lowaddr = BUS_SPACE_MAXADDR;
4104         if (sc->bge_flags & BGE_FLAG_MAXADDR_40BIT)
4105                 lowaddr = BGE_DMA_MAXADDR_40BIT;
4106
4107         /*
4108          * Allocate the parent bus DMA tag appropriate for PCI.
4109          *
4110          * All of the NetExtreme/NetLink controllers have 4GB boundary
4111          * DMA bug.
4112          * Whenever an address crosses a multiple of the 4GB boundary
4113          * (including 4GB, 8Gb, 12Gb, etc.) and makes the transition
4114          * from 0xX_FFFF_FFFF to 0x(X+1)_0000_0000 an internal DMA
4115          * state machine will lockup and cause the device to hang.
4116          */
4117         error = bus_dma_tag_create(NULL, 1, BGE_DMA_BOUNDARY_4G,
4118                                    lowaddr, BUS_SPACE_MAXADDR,
4119                                    NULL, NULL,
4120                                    BUS_SPACE_MAXSIZE_32BIT, 0,
4121                                    BUS_SPACE_MAXSIZE_32BIT,
4122                                    0, &sc->bge_cdata.bge_parent_tag);
4123         if (error) {
4124                 if_printf(ifp, "could not allocate parent dma tag\n");
4125                 return error;
4126         }
4127
4128         /*
4129          * Create DMA tag and maps for RX mbufs.
4130          */
4131         error = bus_dma_tag_create(sc->bge_cdata.bge_parent_tag, 1, 0,
4132                                    BUS_SPACE_MAXADDR, BUS_SPACE_MAXADDR,
4133                                    NULL, NULL, MCLBYTES, 1, MCLBYTES,
4134                                    BUS_DMA_ALLOCNOW | BUS_DMA_WAITOK,
4135                                    &sc->bge_cdata.bge_rx_mtag);
4136         if (error) {
4137                 if_printf(ifp, "could not allocate RX mbuf dma tag\n");
4138                 return error;
4139         }
4140
4141         error = bus_dmamap_create(sc->bge_cdata.bge_rx_mtag,
4142                                   BUS_DMA_WAITOK, &sc->bge_cdata.bge_rx_tmpmap);
4143         if (error) {
4144                 bus_dma_tag_destroy(sc->bge_cdata.bge_rx_mtag);
4145                 sc->bge_cdata.bge_rx_mtag = NULL;
4146                 return error;
4147         }
4148
4149         for (i = 0; i < BGE_STD_RX_RING_CNT; i++) {
4150                 error = bus_dmamap_create(sc->bge_cdata.bge_rx_mtag,
4151                                           BUS_DMA_WAITOK,
4152                                           &sc->bge_cdata.bge_rx_std_dmamap[i]);
4153                 if (error) {
4154                         int j;
4155
4156                         for (j = 0; j < i; ++j) {
4157                                 bus_dmamap_destroy(sc->bge_cdata.bge_rx_mtag,
4158                                         sc->bge_cdata.bge_rx_std_dmamap[j]);
4159                         }
4160                         bus_dma_tag_destroy(sc->bge_cdata.bge_rx_mtag);
4161                         sc->bge_cdata.bge_rx_mtag = NULL;
4162
4163                         if_printf(ifp, "could not create DMA map for RX\n");
4164                         return error;
4165                 }
4166         }
4167
4168         /*
4169          * Create DMA tag and maps for TX mbufs.
4170          */
4171         if (sc->bge_flags & BGE_FLAG_TSO)
4172                 txmaxsz = IP_MAXPACKET + sizeof(struct ether_vlan_header);
4173         else
4174                 txmaxsz = BGE_JUMBO_FRAMELEN;
4175         error = bus_dma_tag_create(sc->bge_cdata.bge_parent_tag, 1, 0,
4176                                    BUS_SPACE_MAXADDR, BUS_SPACE_MAXADDR,
4177                                    NULL, NULL,
4178                                    txmaxsz, BGE_NSEG_NEW, PAGE_SIZE,
4179                                    BUS_DMA_ALLOCNOW | BUS_DMA_WAITOK |
4180                                    BUS_DMA_ONEBPAGE,
4181                                    &sc->bge_cdata.bge_tx_mtag);
4182         if (error) {
4183                 if_printf(ifp, "could not allocate TX mbuf dma tag\n");
4184                 return error;
4185         }
4186
4187         for (i = 0; i < BGE_TX_RING_CNT; i++) {
4188                 error = bus_dmamap_create(sc->bge_cdata.bge_tx_mtag,
4189                                           BUS_DMA_WAITOK | BUS_DMA_ONEBPAGE,
4190                                           &sc->bge_cdata.bge_tx_dmamap[i]);
4191                 if (error) {
4192                         int j;
4193
4194                         for (j = 0; j < i; ++j) {
4195                                 bus_dmamap_destroy(sc->bge_cdata.bge_tx_mtag,
4196                                         sc->bge_cdata.bge_tx_dmamap[j]);
4197                         }
4198                         bus_dma_tag_destroy(sc->bge_cdata.bge_tx_mtag);
4199                         sc->bge_cdata.bge_tx_mtag = NULL;
4200
4201                         if_printf(ifp, "could not create DMA map for TX\n");
4202                         return error;
4203                 }
4204         }
4205
4206         /*
4207          * Create DMA stuffs for standard RX ring.
4208          */
4209         error = bge_dma_block_alloc(sc, BGE_STD_RX_RING_SZ,
4210                                     &sc->bge_cdata.bge_rx_std_ring_tag,
4211                                     &sc->bge_cdata.bge_rx_std_ring_map,
4212                                     (void *)&sc->bge_ldata.bge_rx_std_ring,
4213                                     &sc->bge_ldata.bge_rx_std_ring_paddr);
4214         if (error) {
4215                 if_printf(ifp, "could not create std RX ring\n");
4216                 return error;
4217         }
4218
4219         /*
4220          * Create jumbo buffer pool.
4221          */
4222         if (BGE_IS_JUMBO_CAPABLE(sc)) {
4223                 error = bge_alloc_jumbo_mem(sc);
4224                 if (error) {
4225                         if_printf(ifp, "could not create jumbo buffer pool\n");
4226                         return error;
4227                 }
4228         }
4229
4230         /*
4231          * Create DMA stuffs for RX return ring.
4232          */
4233         error = bge_dma_block_alloc(sc,
4234             BGE_RX_RTN_RING_SZ(sc->bge_return_ring_cnt),
4235             &sc->bge_cdata.bge_rx_return_ring_tag,
4236             &sc->bge_cdata.bge_rx_return_ring_map,
4237             (void *)&sc->bge_ldata.bge_rx_return_ring,
4238             &sc->bge_ldata.bge_rx_return_ring_paddr);
4239         if (error) {
4240                 if_printf(ifp, "could not create RX ret ring\n");
4241                 return error;
4242         }
4243
4244         /*
4245          * Create DMA stuffs for TX ring.
4246          */
4247         error = bge_dma_block_alloc(sc, BGE_TX_RING_SZ,
4248                                     &sc->bge_cdata.bge_tx_ring_tag,
4249                                     &sc->bge_cdata.bge_tx_ring_map,
4250                                     (void *)&sc->bge_ldata.bge_tx_ring,
4251                                     &sc->bge_ldata.bge_tx_ring_paddr);
4252         if (error) {
4253                 if_printf(ifp, "could not create TX ring\n");
4254                 return error;
4255         }
4256
4257         /*
4258          * Create DMA stuffs for status block.
4259          */
4260         error = bge_dma_block_alloc(sc, BGE_STATUS_BLK_SZ,
4261                                     &sc->bge_cdata.bge_status_tag,
4262                                     &sc->bge_cdata.bge_status_map,
4263                                     (void *)&sc->bge_ldata.bge_status_block,
4264                                     &sc->bge_ldata.bge_status_block_paddr);
4265         if (error) {
4266                 if_printf(ifp, "could not create status block\n");
4267                 return error;
4268         }
4269
4270         /*
4271          * Create DMA stuffs for statistics block.
4272          */
4273         error = bge_dma_block_alloc(sc, BGE_STATS_SZ,
4274                                     &sc->bge_cdata.bge_stats_tag,
4275                                     &sc->bge_cdata.bge_stats_map,
4276                                     (void *)&sc->bge_ldata.bge_stats,
4277                                     &sc->bge_ldata.bge_stats_paddr);
4278         if (error) {
4279                 if_printf(ifp, "could not create stats block\n");
4280                 return error;
4281         }
4282         return 0;
4283 }
4284
4285 static int
4286 bge_dma_block_alloc(struct bge_softc *sc, bus_size_t size, bus_dma_tag_t *tag,
4287                     bus_dmamap_t *map, void **addr, bus_addr_t *paddr)
4288 {
4289         bus_dmamem_t dmem;
4290         int error;
4291
4292         error = bus_dmamem_coherent(sc->bge_cdata.bge_parent_tag, PAGE_SIZE, 0,
4293                                     BUS_SPACE_MAXADDR, BUS_SPACE_MAXADDR,
4294                                     size, BUS_DMA_WAITOK | BUS_DMA_ZERO, &dmem);
4295         if (error)
4296                 return error;
4297
4298         *tag = dmem.dmem_tag;
4299         *map = dmem.dmem_map;
4300         *addr = dmem.dmem_addr;
4301         *paddr = dmem.dmem_busaddr;
4302
4303         return 0;
4304 }
4305
4306 static void
4307 bge_dma_block_free(bus_dma_tag_t tag, bus_dmamap_t map, void *addr)
4308 {
4309         if (tag != NULL) {
4310                 bus_dmamap_unload(tag, map);
4311                 bus_dmamem_free(tag, addr, map);
4312                 bus_dma_tag_destroy(tag);
4313         }
4314 }
4315
4316 /*
4317  * Grrr. The link status word in the status block does
4318  * not work correctly on the BCM5700 rev AX and BX chips,
4319  * according to all available information. Hence, we have
4320  * to enable MII interrupts in order to properly obtain
4321  * async link changes. Unfortunately, this also means that
4322  * we have to read the MAC status register to detect link
4323  * changes, thereby adding an additional register access to
4324  * the interrupt handler.
4325  *
4326  * XXX: perhaps link state detection procedure used for
4327  * BGE_CHIPID_BCM5700_B2 can be used for others BCM5700 revisions.
4328  */
4329 static void
4330 bge_bcm5700_link_upd(struct bge_softc *sc, uint32_t status __unused)
4331 {
4332         struct ifnet *ifp = &sc->arpcom.ac_if;
4333         struct mii_data *mii = device_get_softc(sc->bge_miibus);
4334
4335         mii_pollstat(mii);
4336
4337         if (!sc->bge_link &&
4338             (mii->mii_media_status & IFM_ACTIVE) &&
4339             IFM_SUBTYPE(mii->mii_media_active) != IFM_NONE) {
4340                 sc->bge_link++;
4341                 if (bootverbose)
4342                         if_printf(ifp, "link UP\n");
4343         } else if (sc->bge_link &&
4344             (!(mii->mii_media_status & IFM_ACTIVE) ||
4345             IFM_SUBTYPE(mii->mii_media_active) == IFM_NONE)) {
4346                 sc->bge_link = 0;
4347                 if (bootverbose)
4348                         if_printf(ifp, "link DOWN\n");
4349         }
4350
4351         /* Clear the interrupt. */
4352         CSR_WRITE_4(sc, BGE_MAC_EVT_ENB, BGE_EVTENB_MI_INTERRUPT);
4353         bge_miibus_readreg(sc->bge_dev, 1, BRGPHY_MII_ISR);
4354         bge_miibus_writereg(sc->bge_dev, 1, BRGPHY_MII_IMR, BRGPHY_INTRS);
4355 }
4356
4357 static void
4358 bge_tbi_link_upd(struct bge_softc *sc, uint32_t status)
4359 {
4360         struct ifnet *ifp = &sc->arpcom.ac_if;
4361
4362 #define PCS_ENCODE_ERR  (BGE_MACSTAT_PORT_DECODE_ERROR|BGE_MACSTAT_MI_COMPLETE)
4363
4364         /*
4365          * Sometimes PCS encoding errors are detected in
4366          * TBI mode (on fiber NICs), and for some reason
4367          * the chip will signal them as link changes.
4368          * If we get a link change event, but the 'PCS
4369          * encoding error' bit in the MAC status register
4370          * is set, don't bother doing a link check.
4371          * This avoids spurious "gigabit link up" messages
4372          * that sometimes appear on fiber NICs during
4373          * periods of heavy traffic.
4374          */
4375         if (status & BGE_MACSTAT_TBI_PCS_SYNCHED) {
4376                 if (!sc->bge_link) {
4377                         sc->bge_link++;
4378                         if (sc->bge_asicrev == BGE_ASICREV_BCM5704) {
4379                                 BGE_CLRBIT(sc, BGE_MAC_MODE,
4380                                     BGE_MACMODE_TBI_SEND_CFGS);
4381                         }
4382                         CSR_WRITE_4(sc, BGE_MAC_STS, 0xFFFFFFFF);
4383
4384                         if (bootverbose)
4385                                 if_printf(ifp, "link UP\n");
4386
4387                         ifp->if_link_state = LINK_STATE_UP;
4388                         if_link_state_change(ifp);
4389                 }
4390         } else if ((status & PCS_ENCODE_ERR) != PCS_ENCODE_ERR) {
4391                 if (sc->bge_link) {
4392                         sc->bge_link = 0;
4393
4394                         if (bootverbose)
4395                                 if_printf(ifp, "link DOWN\n");
4396
4397                         ifp->if_link_state = LINK_STATE_DOWN;
4398                         if_link_state_change(ifp);
4399                 }
4400         }
4401
4402 #undef PCS_ENCODE_ERR
4403
4404         /* Clear the attention. */
4405         CSR_WRITE_4(sc, BGE_MAC_STS, BGE_MACSTAT_SYNC_CHANGED |
4406             BGE_MACSTAT_CFG_CHANGED | BGE_MACSTAT_MI_COMPLETE |
4407             BGE_MACSTAT_LINK_CHANGED);
4408 }
4409
4410 static void
4411 bge_copper_link_upd(struct bge_softc *sc, uint32_t status __unused)
4412 {
4413         struct ifnet *ifp = &sc->arpcom.ac_if;
4414         struct mii_data *mii = device_get_softc(sc->bge_miibus);
4415
4416         mii_pollstat(mii);
4417         bge_miibus_statchg(sc->bge_dev);
4418
4419         if (bootverbose) {
4420                 if (sc->bge_link)
4421                         if_printf(ifp, "link UP\n");
4422                 else
4423                         if_printf(ifp, "link DOWN\n");
4424         }
4425
4426         /* Clear the attention. */
4427         CSR_WRITE_4(sc, BGE_MAC_STS, BGE_MACSTAT_SYNC_CHANGED |
4428             BGE_MACSTAT_CFG_CHANGED | BGE_MACSTAT_MI_COMPLETE |
4429             BGE_MACSTAT_LINK_CHANGED);
4430 }
4431
4432 static void
4433 bge_autopoll_link_upd(struct bge_softc *sc, uint32_t status __unused)
4434 {
4435         struct ifnet *ifp = &sc->arpcom.ac_if;
4436         struct mii_data *mii = device_get_softc(sc->bge_miibus);
4437
4438         mii_pollstat(mii);
4439
4440         if (!sc->bge_link &&
4441             (mii->mii_media_status & IFM_ACTIVE) &&
4442             IFM_SUBTYPE(mii->mii_media_active) != IFM_NONE) {
4443                 sc->bge_link++;
4444                 if (bootverbose)
4445                         if_printf(ifp, "link UP\n");
4446         } else if (sc->bge_link &&
4447             (!(mii->mii_media_status & IFM_ACTIVE) ||
4448             IFM_SUBTYPE(mii->mii_media_active) == IFM_NONE)) {
4449                 sc->bge_link = 0;
4450                 if (bootverbose)
4451                         if_printf(ifp, "link DOWN\n");
4452         }
4453
4454         /* Clear the attention. */
4455         CSR_WRITE_4(sc, BGE_MAC_STS, BGE_MACSTAT_SYNC_CHANGED |
4456             BGE_MACSTAT_CFG_CHANGED | BGE_MACSTAT_MI_COMPLETE |
4457             BGE_MACSTAT_LINK_CHANGED);
4458 }
4459
4460 static int
4461 bge_sysctl_rx_coal_ticks(SYSCTL_HANDLER_ARGS)
4462 {
4463         struct bge_softc *sc = arg1;
4464
4465         return bge_sysctl_coal_chg(oidp, arg1, arg2, req,
4466             &sc->bge_rx_coal_ticks,
4467             BGE_RX_COAL_TICKS_MIN, BGE_RX_COAL_TICKS_MAX,
4468             BGE_RX_COAL_TICKS_CHG);
4469 }
4470
4471 static int
4472 bge_sysctl_tx_coal_ticks(SYSCTL_HANDLER_ARGS)
4473 {
4474         struct bge_softc *sc = arg1;
4475
4476         return bge_sysctl_coal_chg(oidp, arg1, arg2, req,
4477             &sc->bge_tx_coal_ticks,
4478             BGE_TX_COAL_TICKS_MIN, BGE_TX_COAL_TICKS_MAX,
4479             BGE_TX_COAL_TICKS_CHG);
4480 }
4481
4482 static int
4483 bge_sysctl_rx_coal_bds(SYSCTL_HANDLER_ARGS)
4484 {
4485         struct bge_softc *sc = arg1;
4486
4487         return bge_sysctl_coal_chg(oidp, arg1, arg2, req,
4488             &sc->bge_rx_coal_bds,
4489             BGE_RX_COAL_BDS_MIN, BGE_RX_COAL_BDS_MAX,
4490             BGE_RX_COAL_BDS_CHG);
4491 }
4492
4493 static int
4494 bge_sysctl_tx_coal_bds(SYSCTL_HANDLER_ARGS)
4495 {
4496         struct bge_softc *sc = arg1;
4497
4498         return bge_sysctl_coal_chg(oidp, arg1, arg2, req,
4499             &sc->bge_tx_coal_bds,
4500             BGE_TX_COAL_BDS_MIN, BGE_TX_COAL_BDS_MAX,
4501             BGE_TX_COAL_BDS_CHG);
4502 }
4503
4504 static int
4505 bge_sysctl_rx_coal_ticks_int(SYSCTL_HANDLER_ARGS)
4506 {
4507         struct bge_softc *sc = arg1;
4508
4509         return bge_sysctl_coal_chg(oidp, arg1, arg2, req,
4510             &sc->bge_rx_coal_ticks_int,
4511             BGE_RX_COAL_TICKS_MIN, BGE_RX_COAL_TICKS_MAX,
4512             BGE_RX_COAL_TICKS_INT_CHG);
4513 }
4514
4515 static int
4516 bge_sysctl_tx_coal_ticks_int(SYSCTL_HANDLER_ARGS)
4517 {
4518         struct bge_softc *sc = arg1;
4519
4520         return bge_sysctl_coal_chg(oidp, arg1, arg2, req,
4521             &sc->bge_tx_coal_ticks_int,
4522             BGE_TX_COAL_TICKS_MIN, BGE_TX_COAL_TICKS_MAX,
4523             BGE_TX_COAL_TICKS_INT_CHG);
4524 }
4525
4526 static int
4527 bge_sysctl_rx_coal_bds_int(SYSCTL_HANDLER_ARGS)
4528 {
4529         struct bge_softc *sc = arg1;
4530
4531         return bge_sysctl_coal_chg(oidp, arg1, arg2, req,
4532             &sc->bge_rx_coal_bds_int,
4533             BGE_RX_COAL_BDS_MIN, BGE_RX_COAL_BDS_MAX,
4534             BGE_RX_COAL_BDS_INT_CHG);
4535 }
4536
4537 static int
4538 bge_sysctl_tx_coal_bds_int(SYSCTL_HANDLER_ARGS)
4539 {
4540         struct bge_softc *sc = arg1;
4541
4542         return bge_sysctl_coal_chg(oidp, arg1, arg2, req,
4543             &sc->bge_tx_coal_bds_int,
4544             BGE_TX_COAL_BDS_MIN, BGE_TX_COAL_BDS_MAX,
4545             BGE_TX_COAL_BDS_INT_CHG);
4546 }
4547
4548 static int
4549 bge_sysctl_coal_chg(SYSCTL_HANDLER_ARGS, uint32_t *coal,
4550     int coal_min, int coal_max, uint32_t coal_chg_mask)
4551 {
4552         struct bge_softc *sc = arg1;
4553         struct ifnet *ifp = &sc->arpcom.ac_if;
4554         int error = 0, v;
4555
4556         lwkt_serialize_enter(ifp->if_serializer);
4557
4558         v = *coal;
4559         error = sysctl_handle_int(oidp, &v, 0, req);
4560         if (!error && req->newptr != NULL) {
4561                 if (v < coal_min || v > coal_max) {
4562                         error = EINVAL;
4563                 } else {
4564                         *coal = v;
4565                         sc->bge_coal_chg |= coal_chg_mask;
4566                 }
4567         }
4568
4569         lwkt_serialize_exit(ifp->if_serializer);
4570         return error;
4571 }
4572
4573 static void
4574 bge_coal_change(struct bge_softc *sc)
4575 {
4576         struct ifnet *ifp = &sc->arpcom.ac_if;
4577         uint32_t val;
4578
4579         ASSERT_SERIALIZED(ifp->if_serializer);
4580
4581         if (sc->bge_coal_chg & BGE_RX_COAL_TICKS_CHG) {
4582                 CSR_WRITE_4(sc, BGE_HCC_RX_COAL_TICKS,
4583                             sc->bge_rx_coal_ticks);
4584                 DELAY(10);
4585                 val = CSR_READ_4(sc, BGE_HCC_RX_COAL_TICKS);
4586
4587                 if (bootverbose) {
4588                         if_printf(ifp, "rx_coal_ticks -> %u\n",
4589                                   sc->bge_rx_coal_ticks);
4590                 }
4591         }
4592
4593         if (sc->bge_coal_chg & BGE_TX_COAL_TICKS_CHG) {
4594                 CSR_WRITE_4(sc, BGE_HCC_TX_COAL_TICKS,
4595                             sc->bge_tx_coal_ticks);
4596                 DELAY(10);
4597                 val = CSR_READ_4(sc, BGE_HCC_TX_COAL_TICKS);
4598
4599                 if (bootverbose) {
4600                         if_printf(ifp, "tx_coal_ticks -> %u\n",
4601                                   sc->bge_tx_coal_ticks);
4602                 }
4603         }
4604
4605         if (sc->bge_coal_chg & BGE_RX_COAL_BDS_CHG) {
4606                 CSR_WRITE_4(sc, BGE_HCC_RX_MAX_COAL_BDS,
4607                             sc->bge_rx_coal_bds);
4608                 DELAY(10);
4609                 val = CSR_READ_4(sc, BGE_HCC_RX_MAX_COAL_BDS);
4610
4611                 if (bootverbose) {
4612                         if_printf(ifp, "rx_coal_bds -> %u\n",
4613                                   sc->bge_rx_coal_bds);
4614                 }
4615         }
4616
4617         if (sc->bge_coal_chg & BGE_TX_COAL_BDS_CHG) {
4618                 CSR_WRITE_4(sc, BGE_HCC_TX_MAX_COAL_BDS,
4619                             sc->bge_tx_coal_bds);
4620                 DELAY(10);
4621                 val = CSR_READ_4(sc, BGE_HCC_TX_MAX_COAL_BDS);
4622
4623                 if (bootverbose) {
4624                         if_printf(ifp, "tx_max_coal_bds -> %u\n",
4625                                   sc->bge_tx_coal_bds);
4626                 }
4627         }
4628
4629         if (sc->bge_coal_chg & BGE_RX_COAL_TICKS_INT_CHG) {
4630                 CSR_WRITE_4(sc, BGE_HCC_RX_COAL_TICKS_INT,
4631                     sc->bge_rx_coal_ticks_int);
4632                 DELAY(10);
4633                 val = CSR_READ_4(sc, BGE_HCC_RX_COAL_TICKS_INT);
4634
4635                 if (bootverbose) {
4636                         if_printf(ifp, "rx_coal_ticks_int -> %u\n",
4637                             sc->bge_rx_coal_ticks_int);
4638                 }
4639         }
4640
4641         if (sc->bge_coal_chg & BGE_TX_COAL_TICKS_INT_CHG) {
4642                 CSR_WRITE_4(sc, BGE_HCC_TX_COAL_TICKS_INT,
4643                     sc->bge_tx_coal_ticks_int);
4644                 DELAY(10);
4645                 val = CSR_READ_4(sc, BGE_HCC_TX_COAL_TICKS_INT);
4646
4647                 if (bootverbose) {
4648                         if_printf(ifp, "tx_coal_ticks_int -> %u\n",
4649                             sc->bge_tx_coal_ticks_int);
4650                 }
4651         }
4652
4653         if (sc->bge_coal_chg & BGE_RX_COAL_BDS_INT_CHG) {
4654                 CSR_WRITE_4(sc, BGE_HCC_RX_MAX_COAL_BDS_INT,
4655                     sc->bge_rx_coal_bds_int);
4656                 DELAY(10);
4657                 val = CSR_READ_4(sc, BGE_HCC_RX_MAX_COAL_BDS_INT);
4658
4659                 if (bootverbose) {
4660                         if_printf(ifp, "rx_coal_bds_int -> %u\n",
4661                             sc->bge_rx_coal_bds_int);
4662                 }
4663         }
4664
4665         if (sc->bge_coal_chg & BGE_TX_COAL_BDS_INT_CHG) {
4666                 CSR_WRITE_4(sc, BGE_HCC_TX_MAX_COAL_BDS_INT,
4667                     sc->bge_tx_coal_bds_int);
4668                 DELAY(10);
4669                 val = CSR_READ_4(sc, BGE_HCC_TX_MAX_COAL_BDS_INT);
4670
4671                 if (bootverbose) {
4672                         if_printf(ifp, "tx_coal_bds_int -> %u\n",
4673                             sc->bge_tx_coal_bds_int);
4674                 }
4675         }
4676
4677         sc->bge_coal_chg = 0;
4678 }
4679
4680 static void
4681 bge_enable_intr(struct bge_softc *sc)
4682 {
4683         struct ifnet *ifp = &sc->arpcom.ac_if;
4684
4685         lwkt_serialize_handler_enable(ifp->if_serializer);
4686
4687         /*
4688          * Enable interrupt.
4689          */
4690         bge_writembx(sc, BGE_MBX_IRQ0_LO, sc->bge_status_tag << 24);
4691         if (sc->bge_flags & BGE_FLAG_ONESHOT_MSI) {
4692                 /* XXX Linux driver */
4693                 bge_writembx(sc, BGE_MBX_IRQ0_LO, sc->bge_status_tag << 24);
4694         }
4695
4696         /*
4697          * Unmask the interrupt when we stop polling.
4698          */
4699         PCI_CLRBIT(sc->bge_dev, BGE_PCI_MISC_CTL,
4700             BGE_PCIMISCCTL_MASK_PCI_INTR, 4);
4701
4702         /*
4703          * Trigger another interrupt, since above writing
4704          * to interrupt mailbox0 may acknowledge pending
4705          * interrupt.
4706          */
4707         BGE_SETBIT(sc, BGE_MISC_LOCAL_CTL, BGE_MLC_INTR_SET);
4708 }
4709
4710 static void
4711 bge_disable_intr(struct bge_softc *sc)
4712 {
4713         struct ifnet *ifp = &sc->arpcom.ac_if;
4714
4715         /*
4716          * Mask the interrupt when we start polling.
4717          */
4718         PCI_SETBIT(sc->bge_dev, BGE_PCI_MISC_CTL,
4719             BGE_PCIMISCCTL_MASK_PCI_INTR, 4);
4720
4721         /*
4722          * Acknowledge possible asserted interrupt.
4723          */
4724         bge_writembx(sc, BGE_MBX_IRQ0_LO, 1);
4725
4726         lwkt_serialize_handler_disable(ifp->if_serializer);
4727 }
4728
4729 static int
4730 bge_get_eaddr_mem(struct bge_softc *sc, uint8_t ether_addr[])
4731 {
4732         uint32_t mac_addr;
4733         int ret = 1;
4734
4735         mac_addr = bge_readmem_ind(sc, 0x0c14);
4736         if ((mac_addr >> 16) == 0x484b) {
4737                 ether_addr[0] = (uint8_t)(mac_addr >> 8);
4738                 ether_addr[1] = (uint8_t)mac_addr;
4739                 mac_addr = bge_readmem_ind(sc, 0x0c18);
4740                 ether_addr[2] = (uint8_t)(mac_addr >> 24);
4741                 ether_addr[3] = (uint8_t)(mac_addr >> 16);
4742                 ether_addr[4] = (uint8_t)(mac_addr >> 8);
4743                 ether_addr[5] = (uint8_t)mac_addr;
4744                 ret = 0;
4745         }
4746         return ret;
4747 }
4748
4749 static int
4750 bge_get_eaddr_nvram(struct bge_softc *sc, uint8_t ether_addr[])
4751 {
4752         int mac_offset = BGE_EE_MAC_OFFSET;
4753
4754         if (sc->bge_asicrev == BGE_ASICREV_BCM5906)
4755                 mac_offset = BGE_EE_MAC_OFFSET_5906;
4756
4757         return bge_read_nvram(sc, ether_addr, mac_offset + 2, ETHER_ADDR_LEN);
4758 }
4759
4760 static int
4761 bge_get_eaddr_eeprom(struct bge_softc *sc, uint8_t ether_addr[])
4762 {
4763         if (sc->bge_flags & BGE_FLAG_NO_EEPROM)
4764                 return 1;
4765
4766         return bge_read_eeprom(sc, ether_addr, BGE_EE_MAC_OFFSET + 2,
4767                                ETHER_ADDR_LEN);
4768 }
4769
4770 static int
4771 bge_get_eaddr(struct bge_softc *sc, uint8_t eaddr[])
4772 {
4773         static const bge_eaddr_fcn_t bge_eaddr_funcs[] = {
4774                 /* NOTE: Order is critical */
4775                 bge_get_eaddr_mem,
4776                 bge_get_eaddr_nvram,
4777                 bge_get_eaddr_eeprom,
4778                 NULL
4779         };
4780         const bge_eaddr_fcn_t *func;
4781
4782         for (func = bge_eaddr_funcs; *func != NULL; ++func) {
4783                 if ((*func)(sc, eaddr) == 0)
4784                         break;
4785         }
4786         return (*func == NULL ? ENXIO : 0);
4787 }
4788
4789 /*
4790  * NOTE: 'm' is not freed upon failure
4791  */
4792 struct mbuf *
4793 bge_defrag_shortdma(struct mbuf *m)
4794 {
4795         struct mbuf *n;
4796         int found;
4797
4798         /*
4799          * If device receive two back-to-back send BDs with less than
4800          * or equal to 8 total bytes then the device may hang.  The two
4801          * back-to-back send BDs must in the same frame for this failure
4802          * to occur.  Scan mbuf chains and see whether two back-to-back
4803          * send BDs are there.  If this is the case, allocate new mbuf
4804          * and copy the frame to workaround the silicon bug.
4805          */
4806         for (n = m, found = 0; n != NULL; n = n->m_next) {
4807                 if (n->m_len < 8) {
4808                         found++;
4809                         if (found > 1)
4810                                 break;
4811                         continue;
4812                 }
4813                 found = 0;
4814         }
4815
4816         if (found > 1)
4817                 n = m_defrag(m, MB_DONTWAIT);
4818         else
4819                 n = m;
4820         return n;
4821 }
4822
4823 static void
4824 bge_stop_block(struct bge_softc *sc, bus_size_t reg, uint32_t bit)
4825 {
4826         int i;
4827
4828         BGE_CLRBIT(sc, reg, bit);
4829         for (i = 0; i < BGE_TIMEOUT; i++) {
4830                 if ((CSR_READ_4(sc, reg) & bit) == 0)
4831                         return;
4832                 DELAY(100);
4833         }
4834 }
4835
4836 static void
4837 bge_link_poll(struct bge_softc *sc)
4838 {
4839         uint32_t status;
4840
4841         status = CSR_READ_4(sc, BGE_MAC_STS);
4842         if ((status & sc->bge_link_chg) || sc->bge_link_evt) {
4843                 sc->bge_link_evt = 0;
4844                 sc->bge_link_upd(sc, status);
4845         }
4846 }
4847
4848 static void
4849 bge_enable_msi(struct bge_softc *sc)
4850 {
4851         uint32_t msi_mode;
4852
4853         msi_mode = CSR_READ_4(sc, BGE_MSI_MODE);
4854         msi_mode |= BGE_MSIMODE_ENABLE;
4855         if (sc->bge_flags & BGE_FLAG_ONESHOT_MSI) {
4856                 /*
4857                  * According to all of the datasheets that are publicly
4858                  * available, bit 5 of the MSI_MODE is defined to be
4859                  * "MSI FIFO Underrun Attn" for BCM5755+ and BCM5906, on
4860                  * which "oneshot MSI" is enabled.  However, it is always
4861                  * safe to clear it here.
4862                  */
4863                 msi_mode &= ~BGE_MSIMODE_ONESHOT_DISABLE;
4864         }
4865         CSR_WRITE_4(sc, BGE_MSI_MODE, msi_mode);
4866 }
4867
4868 static int
4869 bge_setup_tso(struct bge_softc *sc, struct mbuf **mp,
4870     uint16_t *mss0, uint16_t *flags0)
4871 {
4872         struct mbuf *m;
4873         struct ip *ip;
4874         struct tcphdr *th;
4875         int thoff, iphlen, hoff, hlen;
4876         uint16_t flags, mss;
4877
4878         m = *mp;
4879         KASSERT(M_WRITABLE(m), ("TSO mbuf not writable"));
4880
4881         hoff = m->m_pkthdr.csum_lhlen;
4882         iphlen = m->m_pkthdr.csum_iphlen;
4883         thoff = m->m_pkthdr.csum_thlen;
4884
4885         KASSERT(hoff > 0, ("invalid ether header len"));
4886         KASSERT(iphlen > 0, ("invalid ip header len"));
4887         KASSERT(thoff > 0, ("invalid tcp header len"));
4888
4889         if (__predict_false(m->m_len < hoff + iphlen + thoff)) {
4890                 m = m_pullup(m, hoff + iphlen + thoff);
4891                 if (m == NULL) {
4892                         *mp = NULL;
4893                         return ENOBUFS;
4894                 }
4895                 *mp = m;
4896         }
4897         ip = mtodoff(m, struct ip *, hoff);
4898         th = mtodoff(m, struct tcphdr *, hoff + iphlen);
4899
4900         mss = m->m_pkthdr.tso_segsz;
4901         flags = BGE_TXBDFLAG_CPU_PRE_DMA | BGE_TXBDFLAG_CPU_POST_DMA;
4902
4903         ip->ip_len = htons(mss + iphlen + thoff);
4904         th->th_sum = 0;
4905
4906         hlen = (iphlen + thoff) >> 2;
4907         mss |= (hlen << 11);
4908
4909         *mss0 = mss;
4910         *flags0 = flags;
4911
4912         return 0;
4913 }