Merge branch 'vendor/FILE'
[dragonfly.git] / sys / net / bpf.c
1 /*
2  * Copyright (c) 1990, 1991, 1993
3  *      The Regents of the University of California.  All rights reserved.
4  *
5  * This code is derived from the Stanford/CMU enet packet filter,
6  * (net/enet.c) distributed as part of 4.3BSD, and code contributed
7  * to Berkeley by Steven McCanne and Van Jacobson both of Lawrence
8  * Berkeley Laboratory.
9  *
10  * Redistribution and use in source and binary forms, with or without
11  * modification, are permitted provided that the following conditions
12  * are met:
13  * 1. Redistributions of source code must retain the above copyright
14  *    notice, this list of conditions and the following disclaimer.
15  * 2. Redistributions in binary form must reproduce the above copyright
16  *    notice, this list of conditions and the following disclaimer in the
17  *    documentation and/or other materials provided with the distribution.
18  * 3. All advertising materials mentioning features or use of this software
19  *    must display the following acknowledgement:
20  *      This product includes software developed by the University of
21  *      California, Berkeley and its contributors.
22  * 4. Neither the name of the University nor the names of its contributors
23  *    may be used to endorse or promote products derived from this software
24  *    without specific prior written permission.
25  *
26  * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
27  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
28  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
29  * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
30  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
31  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
32  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
33  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
34  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
35  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
36  * SUCH DAMAGE.
37  *
38  *      @(#)bpf.c       8.2 (Berkeley) 3/28/94
39  *
40  * $FreeBSD: src/sys/net/bpf.c,v 1.59.2.12 2002/04/14 21:41:48 luigi Exp $
41  * $DragonFly: src/sys/net/bpf.c,v 1.50 2008/09/23 11:28:49 sephe Exp $
42  */
43
44 #include "use_bpf.h"
45
46 #include <sys/param.h>
47 #include <sys/systm.h>
48 #include <sys/conf.h>
49 #include <sys/device.h>
50 #include <sys/malloc.h>
51 #include <sys/mbuf.h>
52 #include <sys/time.h>
53 #include <sys/proc.h>
54 #include <sys/signalvar.h>
55 #include <sys/filio.h>
56 #include <sys/sockio.h>
57 #include <sys/ttycom.h>
58 #include <sys/filedesc.h>
59
60 #include <sys/poll.h>
61
62 #include <sys/socket.h>
63 #include <sys/vnode.h>
64
65 #include <sys/thread2.h>
66 #include <sys/mplock2.h>
67
68 #include <net/if.h>
69 #include <net/bpf.h>
70 #include <net/bpfdesc.h>
71 #include <net/netmsg2.h>
72
73 #include <netinet/in.h>
74 #include <netinet/if_ether.h>
75 #include <sys/kernel.h>
76 #include <sys/sysctl.h>
77
78 #include <sys/devfs.h>
79
80 struct netmsg_bpf_output {
81         struct netmsg   nm_netmsg;
82         struct mbuf     *nm_mbuf;
83         struct ifnet    *nm_ifp;
84         struct sockaddr *nm_dst;
85 };
86
87 MALLOC_DEFINE(M_BPF, "BPF", "BPF data");
88 DEVFS_DECLARE_CLONE_BITMAP(bpf);
89
90 #if NBPF <= 1
91 #define BPF_PREALLOCATED_UNITS  4
92 #else
93 #define BPF_PREALLOCATED_UNITS  NBPF
94 #endif
95
96 #if NBPF > 0
97
98 /*
99  * The default read buffer size is patchable.
100  */
101 static int bpf_bufsize = BPF_DEFAULTBUFSIZE;
102 SYSCTL_INT(_debug, OID_AUTO, bpf_bufsize, CTLFLAG_RW,
103            &bpf_bufsize, 0, "");
104 int bpf_maxbufsize = BPF_MAXBUFSIZE;
105 SYSCTL_INT(_debug, OID_AUTO, bpf_maxbufsize, CTLFLAG_RW,
106            &bpf_maxbufsize, 0, "");
107
108 /*
109  *  bpf_iflist is the list of interfaces; each corresponds to an ifnet
110  */
111 static struct bpf_if    *bpf_iflist;
112
113 static int      bpf_allocbufs(struct bpf_d *);
114 static void     bpf_attachd(struct bpf_d *d, struct bpf_if *bp);
115 static void     bpf_detachd(struct bpf_d *d);
116 static void     bpf_resetd(struct bpf_d *);
117 static void     bpf_freed(struct bpf_d *);
118 static void     bpf_mcopy(const void *, void *, size_t);
119 static int      bpf_movein(struct uio *, int, struct mbuf **,
120                            struct sockaddr *, int *, struct bpf_insn *);
121 static int      bpf_setif(struct bpf_d *, struct ifreq *);
122 static void     bpf_timed_out(void *);
123 static void     bpf_wakeup(struct bpf_d *);
124 static void     catchpacket(struct bpf_d *, u_char *, u_int, u_int,
125                             void (*)(const void *, void *, size_t),
126                             const struct timeval *);
127 static int      bpf_setf(struct bpf_d *, struct bpf_program *, u_long cmd);
128 static int      bpf_getdltlist(struct bpf_d *, struct bpf_dltlist *);
129 static int      bpf_setdlt(struct bpf_d *, u_int);
130 static void     bpf_drvinit(void *unused);
131
132 static d_open_t         bpfopen;
133 static d_clone_t        bpfclone;
134 static d_close_t        bpfclose;
135 static d_read_t         bpfread;
136 static d_write_t        bpfwrite;
137 static d_ioctl_t        bpfioctl;
138 static d_poll_t         bpfpoll;
139
140 #define CDEV_MAJOR 23
141 static struct dev_ops bpf_ops = {
142         { "bpf", CDEV_MAJOR, 0 },
143         .d_open =       bpfopen,
144         .d_close =      bpfclose,
145         .d_read =       bpfread,
146         .d_write =      bpfwrite,
147         .d_ioctl =      bpfioctl,
148         .d_poll =       bpfpoll,
149 };
150
151
152 static int
153 bpf_movein(struct uio *uio, int linktype, struct mbuf **mp,
154            struct sockaddr *sockp, int *datlen, struct bpf_insn *wfilter)
155 {
156         struct mbuf *m;
157         int error;
158         int len;
159         int hlen;
160         int slen;
161
162         *datlen = 0;
163         *mp = NULL;
164
165         /*
166          * Build a sockaddr based on the data link layer type.
167          * We do this at this level because the ethernet header
168          * is copied directly into the data field of the sockaddr.
169          * In the case of SLIP, there is no header and the packet
170          * is forwarded as is.
171          * Also, we are careful to leave room at the front of the mbuf
172          * for the link level header.
173          */
174         switch (linktype) {
175         case DLT_SLIP:
176                 sockp->sa_family = AF_INET;
177                 hlen = 0;
178                 break;
179
180         case DLT_EN10MB:
181                 sockp->sa_family = AF_UNSPEC;
182                 /* XXX Would MAXLINKHDR be better? */
183                 hlen = sizeof(struct ether_header);
184                 break;
185
186         case DLT_RAW:
187         case DLT_NULL:
188                 sockp->sa_family = AF_UNSPEC;
189                 hlen = 0;
190                 break;
191
192         case DLT_ATM_RFC1483:
193                 /*
194                  * en atm driver requires 4-byte atm pseudo header.
195                  * though it isn't standard, vpi:vci needs to be
196                  * specified anyway.
197                  */
198                 sockp->sa_family = AF_UNSPEC;
199                 hlen = 12;      /* XXX 4(ATM_PH) + 3(LLC) + 5(SNAP) */
200                 break;
201
202         case DLT_PPP:
203                 sockp->sa_family = AF_UNSPEC;
204                 hlen = 4;       /* This should match PPP_HDRLEN */
205                 break;
206
207         default:
208                 return(EIO);
209         }
210
211         len = uio->uio_resid;
212         *datlen = len - hlen;
213         if ((unsigned)len > MCLBYTES)
214                 return(EIO);
215
216         m = m_getl(len, MB_WAIT, MT_DATA, M_PKTHDR, NULL);
217         if (m == NULL)
218                 return(ENOBUFS);
219         m->m_pkthdr.len = m->m_len = len;
220         m->m_pkthdr.rcvif = NULL;
221         *mp = m;
222
223         if (m->m_len < hlen) {
224                 error = EPERM;
225                 goto bad;
226         }
227
228         error = uiomove(mtod(m, u_char *), len, uio);
229         if (error)
230                 goto bad;
231
232         slen = bpf_filter(wfilter, mtod(m, u_char *), len, len);
233         if (slen == 0) {
234                 error = EPERM;
235                 goto bad;
236         }
237
238         /*
239          * Make room for link header, and copy it to sockaddr.
240          */
241         if (hlen != 0) {
242                 bcopy(m->m_data, sockp->sa_data, hlen);
243                 m->m_pkthdr.len -= hlen;
244                 m->m_len -= hlen;
245                 m->m_data += hlen; /* XXX */
246         }
247         return (0);
248 bad:
249         m_freem(m);
250         return(error);
251 }
252
253 /*
254  * Attach file to the bpf interface, i.e. make d listen on bp.
255  * Must be called at splimp.
256  */
257 static void
258 bpf_attachd(struct bpf_d *d, struct bpf_if *bp)
259 {
260         /*
261          * Point d at bp, and add d to the interface's list of listeners.
262          * Finally, point the driver's bpf cookie at the interface so
263          * it will divert packets to bpf.
264          */
265         d->bd_bif = bp;
266         SLIST_INSERT_HEAD(&bp->bif_dlist, d, bd_next);
267         *bp->bif_driverp = bp;
268 }
269
270 /*
271  * Detach a file from its interface.
272  */
273 static void
274 bpf_detachd(struct bpf_d *d)
275 {
276         int error;
277         struct bpf_if *bp;
278         struct ifnet *ifp;
279
280         bp = d->bd_bif;
281         ifp = bp->bif_ifp;
282
283         /* Remove d from the interface's descriptor list. */
284         SLIST_REMOVE(&bp->bif_dlist, d, bpf_d, bd_next);
285
286         if (SLIST_EMPTY(&bp->bif_dlist)) {
287                 /*
288                  * Let the driver know that there are no more listeners.
289                  */
290                 *bp->bif_driverp = NULL;
291         }
292         d->bd_bif = NULL;
293         /*
294          * Check if this descriptor had requested promiscuous mode.
295          * If so, turn it off.
296          */
297         if (d->bd_promisc) {
298                 d->bd_promisc = 0;
299                 error = ifpromisc(ifp, 0);
300                 if (error != 0 && error != ENXIO) {
301                         /*
302                          * ENXIO can happen if a pccard is unplugged,
303                          * Something is really wrong if we were able to put
304                          * the driver into promiscuous mode, but can't
305                          * take it out.
306                          */
307                         if_printf(ifp, "bpf_detach: ifpromisc failed(%d)\n",
308                                   error);
309                 }
310         }
311 }
312
313 /*
314  * Open ethernet device.  Returns ENXIO for illegal minor device number,
315  * EBUSY if file is open by another process.
316  */
317 /* ARGSUSED */
318 static int
319 bpfopen(struct dev_open_args *ap)
320 {
321         cdev_t dev = ap->a_head.a_dev;
322         struct bpf_d *d;
323
324         if (ap->a_cred->cr_prison)
325                 return(EPERM);
326
327         d = dev->si_drv1;
328         /*
329          * Each minor can be opened by only one process.  If the requested
330          * minor is in use, return EBUSY.
331          */
332         if (d != NULL)
333                 return(EBUSY);
334
335         MALLOC(d, struct bpf_d *, sizeof *d, M_BPF, M_WAITOK | M_ZERO);
336         dev->si_drv1 = d;
337         d->bd_bufsize = bpf_bufsize;
338         d->bd_sig = SIGIO;
339         d->bd_seesent = 1;
340         callout_init(&d->bd_callout);
341         return(0);
342 }
343
344 static int
345 bpfclone(struct dev_clone_args *ap)
346 {
347         int unit;
348
349         unit = devfs_clone_bitmap_get(&DEVFS_CLONE_BITMAP(bpf), 0);
350         ap->a_dev = make_only_dev(&bpf_ops, unit, 0, 0, 0600, "bpf%d", unit);
351
352         return 0;
353 }
354
355 /*
356  * Close the descriptor by detaching it from its interface,
357  * deallocating its buffers, and marking it free.
358  */
359 /* ARGSUSED */
360 static int
361 bpfclose(struct dev_close_args *ap)
362 {
363         cdev_t dev = ap->a_head.a_dev;
364         struct bpf_d *d = dev->si_drv1;
365
366         funsetown(d->bd_sigio);
367         crit_enter();
368         if (d->bd_state == BPF_WAITING)
369                 callout_stop(&d->bd_callout);
370         d->bd_state = BPF_IDLE;
371         if (d->bd_bif != NULL)
372                 bpf_detachd(d);
373         crit_exit();
374         bpf_freed(d);
375         dev->si_drv1 = NULL;
376         if (dev->si_uminor >= BPF_PREALLOCATED_UNITS) {
377                 devfs_clone_bitmap_put(&DEVFS_CLONE_BITMAP(bpf), dev->si_uminor);
378                 destroy_dev(dev);
379         }
380         kfree(d, M_BPF);
381         return(0);
382 }
383
384 /*
385  * Rotate the packet buffers in descriptor d.  Move the store buffer
386  * into the hold slot, and the free buffer into the store slot.
387  * Zero the length of the new store buffer.
388  */
389 #define ROTATE_BUFFERS(d) \
390         (d)->bd_hbuf = (d)->bd_sbuf; \
391         (d)->bd_hlen = (d)->bd_slen; \
392         (d)->bd_sbuf = (d)->bd_fbuf; \
393         (d)->bd_slen = 0; \
394         (d)->bd_fbuf = NULL;
395 /*
396  *  bpfread - read next chunk of packets from buffers
397  */
398 static int
399 bpfread(struct dev_read_args *ap)
400 {
401         cdev_t dev = ap->a_head.a_dev;
402         struct bpf_d *d = dev->si_drv1;
403         int timed_out;
404         int error;
405
406         /*
407          * Restrict application to use a buffer the same size as
408          * as kernel buffers.
409          */
410         if (ap->a_uio->uio_resid != d->bd_bufsize)
411                 return(EINVAL);
412
413         crit_enter();
414         if (d->bd_state == BPF_WAITING)
415                 callout_stop(&d->bd_callout);
416         timed_out = (d->bd_state == BPF_TIMED_OUT);
417         d->bd_state = BPF_IDLE;
418         /*
419          * If the hold buffer is empty, then do a timed sleep, which
420          * ends when the timeout expires or when enough packets
421          * have arrived to fill the store buffer.
422          */
423         while (d->bd_hbuf == NULL) {
424                 if ((d->bd_immediate || timed_out) && d->bd_slen != 0) {
425                         /*
426                          * A packet(s) either arrived since the previous
427                          * read or arrived while we were asleep.
428                          * Rotate the buffers and return what's here.
429                          */
430                         ROTATE_BUFFERS(d);
431                         break;
432                 }
433
434                 /*
435                  * No data is available, check to see if the bpf device
436                  * is still pointed at a real interface.  If not, return
437                  * ENXIO so that the userland process knows to rebind
438                  * it before using it again.
439                  */
440                 if (d->bd_bif == NULL) {
441                         crit_exit();
442                         return(ENXIO);
443                 }
444
445                 if (ap->a_ioflag & IO_NDELAY) {
446                         crit_exit();
447                         return(EWOULDBLOCK);
448                 }
449                 error = tsleep(d, PCATCH, "bpf", d->bd_rtout);
450                 if (error == EINTR || error == ERESTART) {
451                         crit_exit();
452                         return(error);
453                 }
454                 if (error == EWOULDBLOCK) {
455                         /*
456                          * On a timeout, return what's in the buffer,
457                          * which may be nothing.  If there is something
458                          * in the store buffer, we can rotate the buffers.
459                          */
460                         if (d->bd_hbuf)
461                                 /*
462                                  * We filled up the buffer in between
463                                  * getting the timeout and arriving
464                                  * here, so we don't need to rotate.
465                                  */
466                                 break;
467
468                         if (d->bd_slen == 0) {
469                                 crit_exit();
470                                 return(0);
471                         }
472                         ROTATE_BUFFERS(d);
473                         break;
474                 }
475         }
476         /*
477          * At this point, we know we have something in the hold slot.
478          */
479         crit_exit();
480
481         /*
482          * Move data from hold buffer into user space.
483          * We know the entire buffer is transferred since
484          * we checked above that the read buffer is bpf_bufsize bytes.
485          */
486         error = uiomove(d->bd_hbuf, d->bd_hlen, ap->a_uio);
487
488         crit_enter();
489         d->bd_fbuf = d->bd_hbuf;
490         d->bd_hbuf = NULL;
491         d->bd_hlen = 0;
492         crit_exit();
493
494         return(error);
495 }
496
497
498 /*
499  * If there are processes sleeping on this descriptor, wake them up.
500  */
501 static void
502 bpf_wakeup(struct bpf_d *d)
503 {
504         if (d->bd_state == BPF_WAITING) {
505                 callout_stop(&d->bd_callout);
506                 d->bd_state = BPF_IDLE;
507         }
508         wakeup(d);
509         if (d->bd_async && d->bd_sig && d->bd_sigio)
510                 pgsigio(d->bd_sigio, d->bd_sig, 0);
511
512         get_mplock();
513         selwakeup(&d->bd_sel);
514         rel_mplock();
515         /* XXX */
516         d->bd_sel.si_pid = 0;
517 }
518
519 static void
520 bpf_timed_out(void *arg)
521 {
522         struct bpf_d *d = (struct bpf_d *)arg;
523
524         crit_enter();
525         if (d->bd_state == BPF_WAITING) {
526                 d->bd_state = BPF_TIMED_OUT;
527                 if (d->bd_slen != 0)
528                         bpf_wakeup(d);
529         }
530         crit_exit();
531 }
532
533 static void
534 bpf_output_dispatch(struct netmsg *nmsg)
535 {
536         struct netmsg_bpf_output *bmsg = (struct netmsg_bpf_output *)nmsg;
537         struct ifnet *ifp = bmsg->nm_ifp;
538         int error;
539
540         /*
541          * The driver frees the mbuf.
542          */
543         error = ifp->if_output(ifp, bmsg->nm_mbuf, bmsg->nm_dst, NULL);
544         lwkt_replymsg(&nmsg->nm_lmsg, error);
545 }
546
547 static int
548 bpfwrite(struct dev_write_args *ap)
549 {
550         cdev_t dev = ap->a_head.a_dev;
551         struct bpf_d *d = dev->si_drv1;
552         struct ifnet *ifp;
553         struct mbuf *m;
554         int error;
555         struct sockaddr dst;
556         int datlen;
557         struct netmsg_bpf_output bmsg;
558
559         if (d->bd_bif == NULL)
560                 return(ENXIO);
561
562         ifp = d->bd_bif->bif_ifp;
563
564         if (ap->a_uio->uio_resid == 0)
565                 return(0);
566
567         error = bpf_movein(ap->a_uio, (int)d->bd_bif->bif_dlt, &m,
568                            &dst, &datlen, d->bd_wfilter);
569         if (error)
570                 return(error);
571
572         if (datlen > ifp->if_mtu) {
573                 m_freem(m);
574                 return(EMSGSIZE);
575         }
576
577         if (d->bd_hdrcmplt)
578                 dst.sa_family = pseudo_AF_HDRCMPLT;
579
580         netmsg_init(&bmsg.nm_netmsg, NULL, &curthread->td_msgport,
581                     MSGF_MPSAFE, bpf_output_dispatch);
582         bmsg.nm_mbuf = m;
583         bmsg.nm_ifp = ifp;
584         bmsg.nm_dst = &dst;
585
586         return lwkt_domsg(cpu_portfn(0), &bmsg.nm_netmsg.nm_lmsg, 0);
587 }
588
589 /*
590  * Reset a descriptor by flushing its packet buffer and clearing the
591  * receive and drop counts.  Should be called at splimp.
592  */
593 static void
594 bpf_resetd(struct bpf_d *d)
595 {
596         if (d->bd_hbuf) {
597                 /* Free the hold buffer. */
598                 d->bd_fbuf = d->bd_hbuf;
599                 d->bd_hbuf = NULL;
600         }
601         d->bd_slen = 0;
602         d->bd_hlen = 0;
603         d->bd_rcount = 0;
604         d->bd_dcount = 0;
605 }
606
607 /*
608  *  FIONREAD            Check for read packet available.
609  *  SIOCGIFADDR         Get interface address - convenient hook to driver.
610  *  BIOCGBLEN           Get buffer len [for read()].
611  *  BIOCSETF            Set ethernet read filter.
612  *  BIOCSETWF           Set ethernet write filter.
613  *  BIOCFLUSH           Flush read packet buffer.
614  *  BIOCPROMISC         Put interface into promiscuous mode.
615  *  BIOCGDLT            Get link layer type.
616  *  BIOCGETIF           Get interface name.
617  *  BIOCSETIF           Set interface.
618  *  BIOCSRTIMEOUT       Set read timeout.
619  *  BIOCGRTIMEOUT       Get read timeout.
620  *  BIOCGSTATS          Get packet stats.
621  *  BIOCIMMEDIATE       Set immediate mode.
622  *  BIOCVERSION         Get filter language version.
623  *  BIOCGHDRCMPLT       Get "header already complete" flag
624  *  BIOCSHDRCMPLT       Set "header already complete" flag
625  *  BIOCGSEESENT        Get "see packets sent" flag
626  *  BIOCSSEESENT        Set "see packets sent" flag
627  *  BIOCLOCK            Set "locked" flag
628  */
629 /* ARGSUSED */
630 static int
631 bpfioctl(struct dev_ioctl_args *ap)
632 {
633         cdev_t dev = ap->a_head.a_dev;
634         struct bpf_d *d = dev->si_drv1;
635         int error = 0;
636
637         crit_enter();
638         if (d->bd_state == BPF_WAITING)
639                 callout_stop(&d->bd_callout);
640         d->bd_state = BPF_IDLE;
641         crit_exit();
642
643         if (d->bd_locked == 1) {
644                 switch (ap->a_cmd) {
645                 case BIOCGBLEN:
646                 case BIOCFLUSH:
647                 case BIOCGDLT:
648                 case BIOCGDLTLIST: 
649                 case BIOCGETIF:
650                 case BIOCGRTIMEOUT:
651                 case BIOCGSTATS:
652                 case BIOCVERSION:
653                 case BIOCGRSIG:
654                 case BIOCGHDRCMPLT:
655                 case FIONREAD:
656                 case BIOCLOCK:
657                 case BIOCSRTIMEOUT:
658                 case BIOCIMMEDIATE:
659                 case TIOCGPGRP:
660                         break;
661                 default:
662                         return (EPERM);
663                 }
664         }
665         switch (ap->a_cmd) {
666         default:
667                 error = EINVAL;
668                 break;
669
670         /*
671          * Check for read packet available.
672          */
673         case FIONREAD:
674                 {
675                         int n;
676
677                         crit_enter();
678                         n = d->bd_slen;
679                         if (d->bd_hbuf)
680                                 n += d->bd_hlen;
681                         crit_exit();
682
683                         *(int *)ap->a_data = n;
684                         break;
685                 }
686
687         case SIOCGIFADDR:
688                 {
689                         struct ifnet *ifp;
690
691                         if (d->bd_bif == NULL) {
692                                 error = EINVAL;
693                         } else {
694                                 ifp = d->bd_bif->bif_ifp;
695                                 ifnet_serialize_all(ifp);
696                                 error = ifp->if_ioctl(ifp, ap->a_cmd,
697                                                       ap->a_data, ap->a_cred);
698                                 ifnet_deserialize_all(ifp);
699                         }
700                         break;
701                 }
702
703         /*
704          * Get buffer len [for read()].
705          */
706         case BIOCGBLEN:
707                 *(u_int *)ap->a_data = d->bd_bufsize;
708                 break;
709
710         /*
711          * Set buffer length.
712          */
713         case BIOCSBLEN:
714                 if (d->bd_bif != NULL) {
715                         error = EINVAL;
716                 } else {
717                         u_int size = *(u_int *)ap->a_data;
718
719                         if (size > bpf_maxbufsize)
720                                 *(u_int *)ap->a_data = size = bpf_maxbufsize;
721                         else if (size < BPF_MINBUFSIZE)
722                                 *(u_int *)ap->a_data = size = BPF_MINBUFSIZE;
723                         d->bd_bufsize = size;
724                 }
725                 break;
726
727         /*
728          * Set link layer read filter.
729          */
730         case BIOCSETF:
731         case BIOCSETWF:
732                 error = bpf_setf(d, (struct bpf_program *)ap->a_data, 
733                         ap->a_cmd);
734                 break;
735
736         /*
737          * Flush read packet buffer.
738          */
739         case BIOCFLUSH:
740                 crit_enter();
741                 bpf_resetd(d);
742                 crit_exit();
743                 break;
744
745         /*
746          * Put interface into promiscuous mode.
747          */
748         case BIOCPROMISC:
749                 if (d->bd_bif == NULL) {
750                         /*
751                          * No interface attached yet.
752                          */
753                         error = EINVAL;
754                         break;
755                 }
756                 crit_enter();
757                 if (d->bd_promisc == 0) {
758                         error = ifpromisc(d->bd_bif->bif_ifp, 1);
759                         if (error == 0)
760                                 d->bd_promisc = 1;
761                 }
762                 crit_exit();
763                 break;
764
765         /*
766          * Get device parameters.
767          */
768         case BIOCGDLT:
769                 if (d->bd_bif == NULL)
770                         error = EINVAL;
771                 else
772                         *(u_int *)ap->a_data = d->bd_bif->bif_dlt;
773                 break;
774
775         /*
776          * Get a list of supported data link types.
777          */
778         case BIOCGDLTLIST:
779                 if (d->bd_bif == NULL) {
780                         error = EINVAL;
781                 } else {
782                         error = bpf_getdltlist(d,
783                                 (struct bpf_dltlist *)ap->a_data);
784                 }
785                 break;
786
787         /*
788          * Set data link type.
789          */
790         case BIOCSDLT:
791                 if (d->bd_bif == NULL)
792                         error = EINVAL;
793                 else
794                         error = bpf_setdlt(d, *(u_int *)ap->a_data);
795                 break;
796
797         /*
798          * Get interface name.
799          */
800         case BIOCGETIF:
801                 if (d->bd_bif == NULL) {
802                         error = EINVAL;
803                 } else {
804                         struct ifnet *const ifp = d->bd_bif->bif_ifp;
805                         struct ifreq *const ifr = (struct ifreq *)ap->a_data;
806
807                         strlcpy(ifr->ifr_name, ifp->if_xname,
808                                 sizeof ifr->ifr_name);
809                 }
810                 break;
811
812         /*
813          * Set interface.
814          */
815         case BIOCSETIF:
816                 error = bpf_setif(d, (struct ifreq *)ap->a_data);
817                 break;
818
819         /*
820          * Set read timeout.
821          */
822         case BIOCSRTIMEOUT:
823                 {
824                         struct timeval *tv = (struct timeval *)ap->a_data;
825
826                         /*
827                          * Subtract 1 tick from tvtohz() since this isn't
828                          * a one-shot timer.
829                          */
830                         if ((error = itimerfix(tv)) == 0)
831                                 d->bd_rtout = tvtohz_low(tv);
832                         break;
833                 }
834
835         /*
836          * Get read timeout.
837          */
838         case BIOCGRTIMEOUT:
839                 {
840                         struct timeval *tv = (struct timeval *)ap->a_data;
841
842                         tv->tv_sec = d->bd_rtout / hz;
843                         tv->tv_usec = (d->bd_rtout % hz) * ustick;
844                         break;
845                 }
846
847         /*
848          * Get packet stats.
849          */
850         case BIOCGSTATS:
851                 {
852                         struct bpf_stat *bs = (struct bpf_stat *)ap->a_data;
853
854                         bs->bs_recv = d->bd_rcount;
855                         bs->bs_drop = d->bd_dcount;
856                         break;
857                 }
858
859         /*
860          * Set immediate mode.
861          */
862         case BIOCIMMEDIATE:
863                 d->bd_immediate = *(u_int *)ap->a_data;
864                 break;
865
866         case BIOCVERSION:
867                 {
868                         struct bpf_version *bv = (struct bpf_version *)ap->a_data;
869
870                         bv->bv_major = BPF_MAJOR_VERSION;
871                         bv->bv_minor = BPF_MINOR_VERSION;
872                         break;
873                 }
874
875         /*
876          * Get "header already complete" flag
877          */
878         case BIOCGHDRCMPLT:
879                 *(u_int *)ap->a_data = d->bd_hdrcmplt;
880                 break;
881
882         /*
883          * Set "header already complete" flag
884          */
885         case BIOCSHDRCMPLT:
886                 d->bd_hdrcmplt = *(u_int *)ap->a_data ? 1 : 0;
887                 break;
888
889         /*
890          * Get "see sent packets" flag
891          */
892         case BIOCGSEESENT:
893                 *(u_int *)ap->a_data = d->bd_seesent;
894                 break;
895
896         /*
897          * Set "see sent packets" flag
898          */
899         case BIOCSSEESENT:
900                 d->bd_seesent = *(u_int *)ap->a_data;
901                 break;
902
903         case FIOASYNC:          /* Send signal on receive packets */
904                 d->bd_async = *(int *)ap->a_data;
905                 break;
906
907         case FIOSETOWN:
908                 error = fsetown(*(int *)ap->a_data, &d->bd_sigio);
909                 break;
910
911         case FIOGETOWN:
912                 *(int *)ap->a_data = fgetown(d->bd_sigio);
913                 break;
914
915         /* This is deprecated, FIOSETOWN should be used instead. */
916         case TIOCSPGRP:
917                 error = fsetown(-(*(int *)ap->a_data), &d->bd_sigio);
918                 break;
919
920         /* This is deprecated, FIOGETOWN should be used instead. */
921         case TIOCGPGRP:
922                 *(int *)ap->a_data = -fgetown(d->bd_sigio);
923                 break;
924
925         case BIOCSRSIG:         /* Set receive signal */
926                 {
927                         u_int sig;
928
929                         sig = *(u_int *)ap->a_data;
930
931                         if (sig >= NSIG)
932                                 error = EINVAL;
933                         else
934                                 d->bd_sig = sig;
935                         break;
936                 }
937         case BIOCGRSIG:
938                 *(u_int *)ap->a_data = d->bd_sig;
939                 break;
940         case BIOCLOCK:
941                 d->bd_locked = 1;
942                 break;
943         }
944         return(error);
945 }
946
947 /*
948  * Set d's packet filter program to fp.  If this file already has a filter,
949  * free it and replace it.  Returns EINVAL for bogus requests.
950  */
951 static int
952 bpf_setf(struct bpf_d *d, struct bpf_program *fp, u_long cmd)
953 {
954         struct bpf_insn *fcode, *old;
955         u_int wfilter, flen, size;
956
957         if (cmd == BIOCSETWF) {
958                 old = d->bd_wfilter;
959                 wfilter = 1;
960         } else {
961                 wfilter = 0;
962                 old = d->bd_rfilter;
963         }
964         if (fp->bf_insns == NULL) {
965                 if (fp->bf_len != 0)
966                         return(EINVAL);
967                 crit_enter();
968                 if (wfilter)
969                         d->bd_wfilter = NULL;
970                 else
971                         d->bd_rfilter = NULL;
972                 bpf_resetd(d);
973                 crit_exit();
974                 if (old != NULL)
975                         kfree(old, M_BPF);
976                 return(0);
977         }
978         flen = fp->bf_len;
979         if (flen > BPF_MAXINSNS)
980                 return(EINVAL);
981
982         size = flen * sizeof *fp->bf_insns;
983         fcode = (struct bpf_insn *)kmalloc(size, M_BPF, M_WAITOK);
984         if (copyin(fp->bf_insns, fcode, size) == 0 &&
985             bpf_validate(fcode, (int)flen)) {
986                 crit_enter();
987                 if (wfilter)
988                         d->bd_wfilter = fcode;
989                 else
990                         d->bd_rfilter = fcode;
991                 bpf_resetd(d);
992                 crit_exit();
993                 if (old != NULL)
994                         kfree(old, M_BPF);
995
996                 return(0);
997         }
998         kfree(fcode, M_BPF);
999         return(EINVAL);
1000 }
1001
1002 /*
1003  * Detach a file from its current interface (if attached at all) and attach
1004  * to the interface indicated by the name stored in ifr.
1005  * Return an errno or 0.
1006  */
1007 static int
1008 bpf_setif(struct bpf_d *d, struct ifreq *ifr)
1009 {
1010         struct bpf_if *bp;
1011         int error;
1012         struct ifnet *theywant;
1013
1014         theywant = ifunit(ifr->ifr_name);
1015         if (theywant == NULL)
1016                 return(ENXIO);
1017
1018         /*
1019          * Look through attached interfaces for the named one.
1020          */
1021         for (bp = bpf_iflist; bp != NULL; bp = bp->bif_next) {
1022                 struct ifnet *ifp = bp->bif_ifp;
1023
1024                 if (ifp == NULL || ifp != theywant)
1025                         continue;
1026                 /* skip additional entry */
1027                 if (bp->bif_driverp != &ifp->if_bpf)
1028                         continue;
1029                 /*
1030                  * We found the requested interface.
1031                  * If it's not up, return an error.
1032                  * Allocate the packet buffers if we need to.
1033                  * If we're already attached to requested interface,
1034                  * just flush the buffer.
1035                  */
1036                 if (!(ifp->if_flags & IFF_UP))
1037                         return(ENETDOWN);
1038
1039                 if (d->bd_sbuf == NULL) {
1040                         error = bpf_allocbufs(d);
1041                         if (error != 0)
1042                                 return(error);
1043                 }
1044                 crit_enter();
1045                 if (bp != d->bd_bif) {
1046                         if (d->bd_bif != NULL) {
1047                                 /*
1048                                  * Detach if attached to something else.
1049                                  */
1050                                 bpf_detachd(d);
1051                         }
1052
1053                         bpf_attachd(d, bp);
1054                 }
1055                 bpf_resetd(d);
1056                 crit_exit();
1057                 return(0);
1058         }
1059
1060         /* Not found. */
1061         return(ENXIO);
1062 }
1063
1064 /*
1065  * Support for select() and poll() system calls
1066  *
1067  * Return true iff the specific operation will not block indefinitely.
1068  * Otherwise, return false but make a note that a selwakeup() must be done.
1069  */
1070 static int
1071 bpfpoll(struct dev_poll_args *ap)
1072 {
1073         cdev_t dev = ap->a_head.a_dev;
1074         struct bpf_d *d;
1075         int revents;
1076
1077         d = dev->si_drv1;
1078         if (d->bd_bif == NULL)
1079                 return(ENXIO);
1080
1081         revents = ap->a_events & (POLLOUT | POLLWRNORM);
1082         crit_enter();
1083         if (ap->a_events & (POLLIN | POLLRDNORM)) {
1084                 /*
1085                  * An imitation of the FIONREAD ioctl code.
1086                  * XXX not quite.  An exact imitation:
1087                  *      if (d->b_slen != 0 ||
1088                  *          (d->bd_hbuf != NULL && d->bd_hlen != 0)
1089                  */
1090                 if (d->bd_hlen != 0 ||
1091                     ((d->bd_immediate || d->bd_state == BPF_TIMED_OUT) &&
1092                     d->bd_slen != 0)) {
1093                         revents |= ap->a_events & (POLLIN | POLLRDNORM);
1094                 } else {
1095                         selrecord(curthread, &d->bd_sel);
1096                         /* Start the read timeout if necessary. */
1097                         if (d->bd_rtout > 0 && d->bd_state == BPF_IDLE) {
1098                                 callout_reset(&d->bd_callout, d->bd_rtout,
1099                                     bpf_timed_out, d);
1100                                 d->bd_state = BPF_WAITING;
1101                         }
1102                 }
1103         }
1104         crit_exit();
1105         ap->a_events = revents;
1106         return(0);
1107 }
1108
1109 /*
1110  * Process the packet pkt of length pktlen.  The packet is parsed
1111  * by each listener's filter, and if accepted, stashed into the
1112  * corresponding buffer.
1113  */
1114 void
1115 bpf_tap(struct bpf_if *bp, u_char *pkt, u_int pktlen)
1116 {
1117         struct bpf_d *d;
1118         struct timeval tv;
1119         int gottime = 0;
1120         u_int slen;
1121
1122         get_mplock();
1123
1124         /* Re-check */
1125         if (bp == NULL) {
1126                 rel_mplock();
1127                 return;
1128         }
1129
1130         /*
1131          * Note that the ipl does not have to be raised at this point.
1132          * The only problem that could arise here is that if two different
1133          * interfaces shared any data.  This is not the case.
1134          */
1135         SLIST_FOREACH(d, &bp->bif_dlist, bd_next) {
1136                 ++d->bd_rcount;
1137                 slen = bpf_filter(d->bd_rfilter, pkt, pktlen, pktlen);
1138                 if (slen != 0) {
1139                         if (!gottime) {
1140                                 microtime(&tv);
1141                                 gottime = 1;
1142                         }
1143                         catchpacket(d, pkt, pktlen, slen, ovbcopy, &tv);
1144                 }
1145         }
1146
1147         rel_mplock();
1148 }
1149
1150 /*
1151  * Copy data from an mbuf chain into a buffer.  This code is derived
1152  * from m_copydata in sys/uipc_mbuf.c.
1153  */
1154 static void
1155 bpf_mcopy(const void *src_arg, void *dst_arg, size_t len)
1156 {
1157         const struct mbuf *m;
1158         u_int count;
1159         u_char *dst;
1160
1161         m = src_arg;
1162         dst = dst_arg;
1163         while (len > 0) {
1164                 if (m == NULL)
1165                         panic("bpf_mcopy");
1166                 count = min(m->m_len, len);
1167                 bcopy(mtod(m, void *), dst, count);
1168                 m = m->m_next;
1169                 dst += count;
1170                 len -= count;
1171         }
1172 }
1173
1174 /*
1175  * Process the packet in the mbuf chain m.  The packet is parsed by each
1176  * listener's filter, and if accepted, stashed into the corresponding
1177  * buffer.
1178  */
1179 void
1180 bpf_mtap(struct bpf_if *bp, struct mbuf *m)
1181 {
1182         struct bpf_d *d;
1183         u_int pktlen, slen;
1184         struct timeval tv;
1185         int gottime = 0;
1186
1187         get_mplock();
1188
1189         /* Re-check */
1190         if (bp == NULL) {
1191                 rel_mplock();
1192                 return;
1193         }
1194
1195         /* Don't compute pktlen, if no descriptor is attached. */
1196         if (SLIST_EMPTY(&bp->bif_dlist)) {
1197                 rel_mplock();
1198                 return;
1199         }
1200
1201         pktlen = m_lengthm(m, NULL);
1202
1203         SLIST_FOREACH(d, &bp->bif_dlist, bd_next) {
1204                 if (!d->bd_seesent && (m->m_pkthdr.rcvif == NULL))
1205                         continue;
1206                 ++d->bd_rcount;
1207                 slen = bpf_filter(d->bd_rfilter, (u_char *)m, pktlen, 0);
1208                 if (slen != 0) {
1209                         if (!gottime) {
1210                                 microtime(&tv);
1211                                 gottime = 1;
1212                         }
1213                         catchpacket(d, (u_char *)m, pktlen, slen, bpf_mcopy,
1214                                     &tv);
1215                 }
1216         }
1217
1218         rel_mplock();
1219 }
1220
1221 void
1222 bpf_mtap_family(struct bpf_if *bp, struct mbuf *m, sa_family_t family)
1223 {
1224         u_int family4;
1225
1226         KKASSERT(family != AF_UNSPEC);
1227
1228         family4 = (u_int)family;
1229         bpf_ptap(bp, m, &family4, sizeof(family4));
1230 }
1231
1232 /*
1233  * Process the packet in the mbuf chain m with the header in m prepended.
1234  * The packet is parsed by each listener's filter, and if accepted,
1235  * stashed into the corresponding buffer.
1236  */
1237 void
1238 bpf_ptap(struct bpf_if *bp, struct mbuf *m, const void *data, u_int dlen)
1239 {
1240         struct mbuf mb;
1241
1242         /*
1243          * Craft on-stack mbuf suitable for passing to bpf_mtap.
1244          * Note that we cut corners here; we only setup what's
1245          * absolutely needed--this mbuf should never go anywhere else.
1246          */
1247         mb.m_next = m;
1248         mb.m_data = __DECONST(void *, data); /* LINTED */
1249         mb.m_len = dlen;
1250         mb.m_pkthdr.rcvif = m->m_pkthdr.rcvif;
1251
1252         bpf_mtap(bp, &mb);
1253 }
1254
1255 /*
1256  * Move the packet data from interface memory (pkt) into the
1257  * store buffer.  Return 1 if it's time to wakeup a listener (buffer full),
1258  * otherwise 0.  "copy" is the routine called to do the actual data
1259  * transfer.  bcopy is passed in to copy contiguous chunks, while
1260  * bpf_mcopy is passed in to copy mbuf chains.  In the latter case,
1261  * pkt is really an mbuf.
1262  */
1263 static void
1264 catchpacket(struct bpf_d *d, u_char *pkt, u_int pktlen, u_int snaplen,
1265             void (*cpfn)(const void *, void *, size_t),
1266             const struct timeval *tv)
1267 {
1268         struct bpf_hdr *hp;
1269         int totlen, curlen;
1270         int hdrlen = d->bd_bif->bif_hdrlen;
1271         /*
1272          * Figure out how many bytes to move.  If the packet is
1273          * greater or equal to the snapshot length, transfer that
1274          * much.  Otherwise, transfer the whole packet (unless
1275          * we hit the buffer size limit).
1276          */
1277         totlen = hdrlen + min(snaplen, pktlen);
1278         if (totlen > d->bd_bufsize)
1279                 totlen = d->bd_bufsize;
1280
1281         /*
1282          * Round up the end of the previous packet to the next longword.
1283          */
1284         curlen = BPF_WORDALIGN(d->bd_slen);
1285         if (curlen + totlen > d->bd_bufsize) {
1286                 /*
1287                  * This packet will overflow the storage buffer.
1288                  * Rotate the buffers if we can, then wakeup any
1289                  * pending reads.
1290                  */
1291                 if (d->bd_fbuf == NULL) {
1292                         /*
1293                          * We haven't completed the previous read yet,
1294                          * so drop the packet.
1295                          */
1296                         ++d->bd_dcount;
1297                         return;
1298                 }
1299                 ROTATE_BUFFERS(d);
1300                 bpf_wakeup(d);
1301                 curlen = 0;
1302         } else if (d->bd_immediate || d->bd_state == BPF_TIMED_OUT) {
1303                 /*
1304                  * Immediate mode is set, or the read timeout has
1305                  * already expired during a select call.  A packet
1306                  * arrived, so the reader should be woken up.
1307                  */
1308                 bpf_wakeup(d);
1309         }
1310
1311         /*
1312          * Append the bpf header.
1313          */
1314         hp = (struct bpf_hdr *)(d->bd_sbuf + curlen);
1315         hp->bh_tstamp = *tv;
1316         hp->bh_datalen = pktlen;
1317         hp->bh_hdrlen = hdrlen;
1318         /*
1319          * Copy the packet data into the store buffer and update its length.
1320          */
1321         (*cpfn)(pkt, (u_char *)hp + hdrlen, (hp->bh_caplen = totlen - hdrlen));
1322         d->bd_slen = curlen + totlen;
1323 }
1324
1325 /*
1326  * Initialize all nonzero fields of a descriptor.
1327  */
1328 static int
1329 bpf_allocbufs(struct bpf_d *d)
1330 {
1331         d->bd_fbuf = kmalloc(d->bd_bufsize, M_BPF, M_WAITOK);
1332         d->bd_sbuf = kmalloc(d->bd_bufsize, M_BPF, M_WAITOK);
1333         d->bd_slen = 0;
1334         d->bd_hlen = 0;
1335         return(0);
1336 }
1337
1338 /*
1339  * Free buffers and packet filter program currently in use by a descriptor.
1340  * Called on close.
1341  */
1342 static void
1343 bpf_freed(struct bpf_d *d)
1344 {
1345         /*
1346          * We don't need to lock out interrupts since this descriptor has
1347          * been detached from its interface and it yet hasn't been marked
1348          * free.
1349          */
1350         if (d->bd_sbuf != NULL) {
1351                 kfree(d->bd_sbuf, M_BPF);
1352                 if (d->bd_hbuf != NULL)
1353                         kfree(d->bd_hbuf, M_BPF);
1354                 if (d->bd_fbuf != NULL)
1355                         kfree(d->bd_fbuf, M_BPF);
1356         }
1357         if (d->bd_rfilter)
1358                 kfree(d->bd_rfilter, M_BPF);
1359         if (d->bd_wfilter)
1360                 kfree(d->bd_wfilter, M_BPF);
1361 }
1362
1363 /*
1364  * Attach an interface to bpf.  ifp is a pointer to the structure
1365  * defining the interface to be attached, dlt is the link layer type,
1366  * and hdrlen is the fixed size of the link header (variable length
1367  * headers are not yet supported).
1368  */
1369 void
1370 bpfattach(struct ifnet *ifp, u_int dlt, u_int hdrlen)
1371 {
1372         bpfattach_dlt(ifp, dlt, hdrlen, &ifp->if_bpf);
1373 }
1374
1375 void
1376 bpfattach_dlt(struct ifnet *ifp, u_int dlt, u_int hdrlen, struct bpf_if **driverp)
1377 {
1378         struct bpf_if *bp;
1379
1380         bp = kmalloc(sizeof *bp, M_BPF, M_WAITOK | M_ZERO);
1381
1382         SLIST_INIT(&bp->bif_dlist);
1383         bp->bif_ifp = ifp;
1384         bp->bif_dlt = dlt;
1385         bp->bif_driverp = driverp;
1386         *bp->bif_driverp = NULL;
1387
1388         bp->bif_next = bpf_iflist;
1389         bpf_iflist = bp;
1390
1391         /*
1392          * Compute the length of the bpf header.  This is not necessarily
1393          * equal to SIZEOF_BPF_HDR because we want to insert spacing such
1394          * that the network layer header begins on a longword boundary (for
1395          * performance reasons and to alleviate alignment restrictions).
1396          */
1397         bp->bif_hdrlen = BPF_WORDALIGN(hdrlen + SIZEOF_BPF_HDR) - hdrlen;
1398
1399         if (bootverbose)
1400                 if_printf(ifp, "bpf attached\n");
1401 }
1402
1403 /*
1404  * Detach bpf from an interface.  This involves detaching each descriptor
1405  * associated with the interface, and leaving bd_bif NULL.  Notify each
1406  * descriptor as it's detached so that any sleepers wake up and get
1407  * ENXIO.
1408  */
1409 void
1410 bpfdetach(struct ifnet *ifp)
1411 {
1412         struct bpf_if *bp, *bp_prev;
1413         struct bpf_d *d;
1414
1415         crit_enter();
1416
1417         /* Locate BPF interface information */
1418         bp_prev = NULL;
1419         for (bp = bpf_iflist; bp != NULL; bp = bp->bif_next) {
1420                 if (ifp == bp->bif_ifp)
1421                         break;
1422                 bp_prev = bp;
1423         }
1424
1425         /* Interface wasn't attached */
1426         if (bp->bif_ifp == NULL) {
1427                 crit_exit();
1428                 kprintf("bpfdetach: %s was not attached\n", ifp->if_xname);
1429                 return;
1430         }
1431
1432         while ((d = SLIST_FIRST(&bp->bif_dlist)) != NULL) {
1433                 bpf_detachd(d);
1434                 bpf_wakeup(d);
1435         }
1436
1437         if (bp_prev != NULL)
1438                 bp_prev->bif_next = bp->bif_next;
1439         else
1440                 bpf_iflist = bp->bif_next;
1441
1442         kfree(bp, M_BPF);
1443
1444         crit_exit();
1445 }
1446
1447 /*
1448  * Get a list of available data link type of the interface.
1449  */
1450 static int
1451 bpf_getdltlist(struct bpf_d *d, struct bpf_dltlist *bfl)
1452 {
1453         int n, error;
1454         struct ifnet *ifp;
1455         struct bpf_if *bp;
1456
1457         ifp = d->bd_bif->bif_ifp;
1458         n = 0;
1459         error = 0;
1460         for (bp = bpf_iflist; bp != NULL; bp = bp->bif_next) {
1461                 if (bp->bif_ifp != ifp)
1462                         continue;
1463                 if (bfl->bfl_list != NULL) {
1464                         if (n >= bfl->bfl_len) {
1465                                 return (ENOMEM);
1466                         }
1467                         error = copyout(&bp->bif_dlt,
1468                             bfl->bfl_list + n, sizeof(u_int));
1469                 }
1470                 n++;
1471         }
1472         bfl->bfl_len = n;
1473         return(error);
1474 }
1475
1476 /*
1477  * Set the data link type of a BPF instance.
1478  */
1479 static int
1480 bpf_setdlt(struct bpf_d *d, u_int dlt)
1481 {
1482         int error, opromisc;
1483         struct ifnet *ifp;
1484         struct bpf_if *bp;
1485
1486         if (d->bd_bif->bif_dlt == dlt)
1487                 return (0);
1488         ifp = d->bd_bif->bif_ifp;
1489         for (bp = bpf_iflist; bp != NULL; bp = bp->bif_next) {
1490                 if (bp->bif_ifp == ifp && bp->bif_dlt == dlt)
1491                         break;
1492         }
1493         if (bp != NULL) {
1494                 opromisc = d->bd_promisc;
1495                 crit_enter();
1496                 bpf_detachd(d);
1497                 bpf_attachd(d, bp);
1498                 bpf_resetd(d);
1499                 if (opromisc) {
1500                         error = ifpromisc(bp->bif_ifp, 1);
1501                         if (error) {
1502                                 if_printf(bp->bif_ifp,
1503                                         "bpf_setdlt: ifpromisc failed (%d)\n",
1504                                         error);
1505                         } else {
1506                                 d->bd_promisc = 1;
1507                         }
1508                 }
1509                 crit_exit();
1510         }
1511         return(bp == NULL ? EINVAL : 0);
1512 }
1513
1514 static void
1515 bpf_drvinit(void *unused)
1516 {
1517         int i;
1518
1519         make_autoclone_dev(&bpf_ops, &DEVFS_CLONE_BITMAP(bpf),
1520                 bpfclone, 0, 0, 0600, "bpf");
1521         for (i = 0; i < BPF_PREALLOCATED_UNITS; i++) {
1522                 make_dev(&bpf_ops, i, 0, 0, 0600, "bpf%d", i);
1523                 devfs_clone_bitmap_set(&DEVFS_CLONE_BITMAP(bpf), i);
1524         }
1525 }
1526
1527 static void
1528 bpf_drvuninit(void *unused)
1529 {
1530         devfs_clone_handler_del("bpf");
1531         dev_ops_remove_all(&bpf_ops);
1532         devfs_clone_bitmap_uninit(&DEVFS_CLONE_BITMAP(bpf));
1533 }
1534
1535 SYSINIT(bpfdev,SI_SUB_DRIVERS,SI_ORDER_MIDDLE+CDEV_MAJOR,bpf_drvinit,NULL)
1536 SYSUNINIT(bpfdev, SI_SUB_DRIVERS,SI_ORDER_MIDDLE+CDEV_MAJOR,bpf_drvuninit, NULL);
1537
1538 #else /* !BPF */
1539 /*
1540  * NOP stubs to allow bpf-using drivers to load and function.
1541  *
1542  * A 'better' implementation would allow the core bpf functionality
1543  * to be loaded at runtime.
1544  */
1545
1546 void
1547 bpf_tap(struct bpf_if *bp, u_char *pkt, u_int pktlen)
1548 {
1549 }
1550
1551 void
1552 bpf_mtap(struct bpf_if *bp, struct mbuf *m)
1553 {
1554 }
1555
1556 void
1557 bpf_ptap(struct bpf_if *bp, struct mbuf *m, const void *data, u_int dlen)
1558 {
1559 }
1560
1561 void
1562 bpfattach(struct ifnet *ifp, u_int dlt, u_int hdrlen)
1563 {
1564 }
1565
1566 void
1567 bpfattach_dlt(struct ifnet *ifp, u_int dlt, u_int hdrlen, struct bpf_if **driverp)
1568 {
1569 }
1570
1571 void
1572 bpfdetach(struct ifnet *ifp)
1573 {
1574 }
1575
1576 u_int
1577 bpf_filter(const struct bpf_insn *pc, u_char *p, u_int wirelen, u_int buflen)
1578 {
1579         return -1;      /* "no filter" behaviour */
1580 }
1581
1582 #endif /* !BPF */