2 * Copyright (c) 1990 The Regents of the University of California.
5 * This code is derived from software contributed to Berkeley by
6 * William Jolitz and Don Ahn.
8 * Redistribution and use in source and binary forms, with or without
9 * modification, are permitted provided that the following conditions
11 * 1. Redistributions of source code must retain the above copyright
12 * notice, this list of conditions and the following disclaimer.
13 * 2. Redistributions in binary form must reproduce the above copyright
14 * notice, this list of conditions and the following disclaimer in the
15 * documentation and/or other materials provided with the distribution.
16 * 3. All advertising materials mentioning features or use of this software
17 * must display the following acknowledgement:
18 * This product includes software developed by the University of
19 * California, Berkeley and its contributors.
20 * 4. Neither the name of the University nor the names of its contributors
21 * may be used to endorse or promote products derived from this software
22 * without specific prior written permission.
24 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
25 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
26 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
27 * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
28 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
29 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
30 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
31 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
32 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
33 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
36 * from: @(#)clock.c 7.2 (Berkeley) 5/12/91
37 * $FreeBSD: src/sys/i386/isa/clock.c,v 1.149.2.6 2002/11/02 04:41:50 iwasaki Exp $
38 * $DragonFly: src/sys/platform/pc32/isa/clock.c,v 1.11 2004/01/30 05:42:16 dillon Exp $
42 * Routines to handle clock hardware.
46 * inittodr, settodr and support routines written
47 * by Christoph Robitschko <chmr@edvz.tu-graz.ac.at>
49 * reintroduced and updated by Chris Stenton <chris@gnome.co.uk> 8/10/94
54 #include "opt_clock.h"
56 #include <sys/param.h>
57 #include <sys/systm.h>
59 #include <sys/kernel.h>
63 #include <sys/sysctl.h>
65 #include <sys/systimer.h>
66 #include <sys/globaldata.h>
67 #include <sys/thread2.h>
68 #include <sys/systimer.h>
70 #include <machine/clock.h>
71 #ifdef CLK_CALIBRATION_LOOP
73 #include <machine/cputypes.h>
74 #include <machine/frame.h>
75 #include <machine/ipl.h>
76 #include <machine/limits.h>
77 #include <machine/md_var.h>
78 #include <machine/psl.h>
80 #include <machine/segments.h>
82 #if defined(SMP) || defined(APIC_IO)
83 #include <machine/smp.h>
84 #endif /* SMP || APIC_IO */
85 #include <machine/specialreg.h>
87 #include <i386/isa/icu.h>
88 #include <bus/isa/i386/isa.h>
89 #include <bus/isa/rtc.h>
90 #include <i386/isa/timerreg.h>
92 #include <i386/isa/intr_machdep.h>
95 #include <bus/mca/i386/mca_machdep.h>
99 #include <i386/isa/intr_machdep.h>
100 /* The interrupt triggered by the 8254 (timer) chip */
102 static u_long read_intr_count (int vec);
103 static void setup_8254_mixed_mode (void);
105 static void i8254_restore(void);
108 * 32-bit time_t's can't reach leap years before 1904 or after 2036, so we
109 * can use a simple formula for leap years.
111 #define LEAPYEAR(y) ((u_int)(y) % 4 == 0)
112 #define DAYSPERYEAR (31+28+31+30+31+30+31+31+30+31+30+31)
115 #define TIMER_FREQ 1193182
118 #define TIMER_SELX TIMER_SEL2
119 #define TIMER_CNTRX TIMER_CNTR2
121 int adjkerntz; /* local offset from GMT in seconds */
122 int disable_rtc_set; /* disable resettodr() if != 0 */
123 volatile u_int idelayed;
124 int statclock_disable = 1; /* we don't use the statclock right now */
125 u_int stat_imask = SWI_CLOCK_MASK;
126 u_int cputimer_freq = TIMER_FREQ;
128 int64_t cputimer_freq64_usec = ((int64_t)TIMER_FREQ << 32) / 1000000;
129 int64_t cputimer_freq64_nsec = ((int64_t)TIMER_FREQ << 32) / 1000000000LL;
131 int64_t cputimer_freq64_usec = (1000000LL << 32) / TIMER_FREQ;
132 int64_t cputimer_freq64_nsec = (1000000000LL << 32) / TIMER_FREQ;
135 int wall_cmos_clock; /* wall CMOS clock assumed if != 0 */
137 enum tstate { RELEASED, ACQUIRED };
138 enum tstate timer0_state;
139 enum tstate timer1_state;
140 enum tstate timer2_state;
142 static int beeping = 0;
143 static u_int clk_imask = HWI_MASK | SWI_MASK;
144 static const u_char daysinmonth[] = {31,28,31,30,31,30,31,31,30,31,30,31};
145 static u_char rtc_statusa = RTCSA_DIVIDER | RTCSA_NOPROF;
146 static u_char rtc_statusb = RTCSB_24HR | RTCSB_PINTR;
147 static u_int tsc_present;
150 * timer0 clock interrupt. Timer0 is in one-shot mode and has stopped
151 * counting as of this interrupt. We use timer1 in free-running mode (not
152 * generating any interrupts) as our main counter. Each cpu has timeouts
156 clkintr(struct intrframe frame)
158 static sysclock_t timer1_count;
159 struct globaldata *gd = mycpu;
160 struct globaldata *gscan;
164 * SWSTROBE mode is a one-shot, the timer is no longer running
169 * XXX this could be done more efficiently by using a bitmask?
171 timer1_count = cputimer_count();
172 for (n = 0; n < ncpus; ++n) {
173 gscan = globaldata_find(n);
174 if (gscan->gd_nextclock == 0)
177 lwkt_send_ipiq(gscan->gd_cpuid, (ipifunc_t)systimer_intr, &timer1_count);
179 systimer_intr(&timer1_count, &frame);
183 /* Reset clock interrupt by asserting bit 7 of port 0x61 */
185 outb(0x61, inb(0x61) | 0x80);
194 acquire_timer2(int mode)
196 /* Timer2 is being used for time count operation */
199 if (timer2_state != RELEASED)
201 timer2_state = ACQUIRED;
204 * This access to the timer registers is as atomic as possible
205 * because it is a single instruction. We could do better if we
208 outb(TIMER_MODE, TIMER_SEL2 | (mode & 0x3f));
216 if (timer2_state != ACQUIRED)
218 outb(TIMER_MODE, TIMER_SEL2 | TIMER_SQWAVE | TIMER_16BIT);
219 timer2_state = RELEASED;
224 * This routine receives statistical clock interrupts from the RTC.
225 * As explained above, these occur at 128 interrupts per second.
226 * When profiling, we receive interrupts at a rate of 1024 Hz.
228 * This does not actually add as much overhead as it sounds, because
229 * when the statistical clock is active, the hardclock driver no longer
230 * needs to keep (inaccurate) statistics on its own. This decouples
231 * statistics gathering from scheduling interrupts.
233 * The RTC chip requires that we read status register C (RTC_INTR)
234 * to acknowledge an interrupt, before it will generate the next one.
235 * Under high interrupt load, rtcintr() can be indefinitely delayed and
236 * the clock can tick immediately after the read from RTC_INTR. In this
237 * case, the mc146818A interrupt signal will not drop for long enough
238 * to register with the 8259 PIC. If an interrupt is missed, the stat
239 * clock will halt, considerably degrading system performance. This is
240 * why we use 'while' rather than a more straightforward 'if' below.
241 * Stat clock ticks can still be lost, causing minor loss of accuracy
242 * in the statistics, but the stat clock will no longer stop.
245 rtcintr(struct intrframe frame)
247 while (rtcin(RTC_INTR) & RTCIR_PERIOD)
249 /* statclock(&frame); no longer used */
256 DB_SHOW_COMMAND(rtc, rtc)
258 printf("%02x/%02x/%02x %02x:%02x:%02x, A = %02x, B = %02x, C = %02x\n",
259 rtcin(RTC_YEAR), rtcin(RTC_MONTH), rtcin(RTC_DAY),
260 rtcin(RTC_HRS), rtcin(RTC_MIN), rtcin(RTC_SEC),
261 rtcin(RTC_STATUSA), rtcin(RTC_STATUSB), rtcin(RTC_INTR));
266 * Convert a frequency to a cpu timer count.
269 cputimer_fromhz(int freq)
271 return(cputimer_freq / freq + 1);
275 cputimer_fromus(int us)
277 return((int64_t)cputimer_freq * us / 1000000);
281 * Return the current cpu timer count as a 32 bit integer.
286 static sysclock_t cputimer_base;
287 static __uint16_t cputimer_last;
292 outb(TIMER_MODE, TIMER_SELX | TIMER_LATCH);
293 count = (__uint8_t)inb(TIMER_CNTRX); /* get countdown */
294 count |= ((__uint8_t)inb(TIMER_CNTRX) << 8);
295 count = -count; /* -> countup */
296 if (count < cputimer_last) /* rollover */
297 cputimer_base += 0x00010000;
298 ret = cputimer_base | count;
299 cputimer_last = count;
305 * Reload for the next timeout. It is possible for the reload value
306 * to be 0 or negative, indicating that an immediate timer interrupt
307 * is desired. For now make the minimum 2 ticks.
310 cputimer_intr_reload(sysclock_t reload)
318 if (timer0_running) {
319 outb(TIMER_MODE, TIMER_SEL0 | TIMER_LATCH); /* count-down timer */
320 count = (__uint8_t)inb(TIMER_CNTR0); /* lsb */
321 count |= ((__uint8_t)inb(TIMER_CNTR0) << 8); /* msb */
322 if (reload < count) {
323 outb(TIMER_MODE, TIMER_SEL0 | TIMER_SWSTROBE | TIMER_16BIT);
324 outb(TIMER_CNTR0, (__uint8_t)reload); /* lsb */
325 outb(TIMER_CNTR0, (__uint8_t)(reload >> 8)); /* msb */
330 reload = 0; /* full count */
331 outb(TIMER_MODE, TIMER_SEL0 | TIMER_SWSTROBE | TIMER_16BIT);
332 outb(TIMER_CNTR0, (__uint8_t)reload); /* lsb */
333 outb(TIMER_CNTR0, (__uint8_t)(reload >> 8)); /* msb */
339 * Wait "n" microseconds.
340 * Relies on timer 1 counting down from (cputimer_freq / hz)
341 * Note: timer had better have been programmed before this is first used!
346 int delta, prev_tick, tick, ticks_left;
351 static int state = 0;
355 for (n1 = 1; n1 <= 10000000; n1 *= 10)
360 printf("DELAY(%d)...", n);
363 * Guard against the timer being uninitialized if we are called
364 * early for console i/o.
366 if (timer0_state == RELEASED)
370 * Read the counter first, so that the rest of the setup overhead is
371 * counted. Guess the initial overhead is 20 usec (on most systems it
372 * takes about 1.5 usec for each of the i/o's in getit(). The loop
373 * takes about 6 usec on a 486/33 and 13 usec on a 386/20. The
374 * multiplications and divisions to scale the count take a while).
376 prev_tick = cputimer_count();
377 n -= 0; /* XXX actually guess no initial overhead */
379 * Calculate (n * (cputimer_freq / 1e6)) without using floating point
380 * and without any avoidable overflows.
384 } else if (n < 256) {
386 * Use fixed point to avoid a slow division by 1000000.
387 * 39099 = 1193182 * 2^15 / 10^6 rounded to nearest.
388 * 2^15 is the first power of 2 that gives exact results
389 * for n between 0 and 256.
391 ticks_left = ((u_int)n * 39099 + (1 << 15) - 1) >> 15;
394 * Don't bother using fixed point, although gcc-2.7.2
395 * generates particularly poor code for the long long
396 * division, since even the slow way will complete long
397 * before the delay is up (unless we're interrupted).
399 ticks_left = ((u_int)n * (long long)cputimer_freq + 999999)
403 while (ticks_left > 0) {
404 tick = cputimer_count();
408 delta = tick - prev_tick;
416 printf(" %d calls to getit() at %d usec each\n",
417 getit_calls, (n + 5) / getit_calls);
422 sysbeepstop(void *chan)
424 outb(IO_PPI, inb(IO_PPI)&0xFC); /* disable counter2 output to speaker */
430 sysbeep(int pitch, int period)
432 if (acquire_timer2(TIMER_SQWAVE|TIMER_16BIT))
435 * Nobody else is using timer2, we do not need the clock lock
437 outb(TIMER_CNTR2, pitch);
438 outb(TIMER_CNTR2, (pitch>>8));
440 /* enable counter2 output to speaker */
441 outb(IO_PPI, inb(IO_PPI) | 3);
443 timeout(sysbeepstop, (void *)NULL, period);
449 * RTC support routines
462 val = inb(IO_RTC + 1);
469 writertc(u_char reg, u_char val)
477 outb(IO_RTC + 1, val);
478 inb(0x84); /* XXX work around wrong order in rtcin() */
485 return(bcd2bin(rtcin(port)));
489 calibrate_clocks(void)
492 u_int count, prev_count, tot_count;
493 int sec, start_sec, timeout;
496 printf("Calibrating clock(s) ... ");
497 if (!(rtcin(RTC_STATUSD) & RTCSD_PWR))
501 /* Read the mc146818A seconds counter. */
503 if (!(rtcin(RTC_STATUSA) & RTCSA_TUP)) {
504 sec = rtcin(RTC_SEC);
511 /* Wait for the mC146818A seconds counter to change. */
514 if (!(rtcin(RTC_STATUSA) & RTCSA_TUP)) {
515 sec = rtcin(RTC_SEC);
516 if (sec != start_sec)
523 /* Start keeping track of the i8254 counter. */
524 prev_count = cputimer_count();
530 old_tsc = 0; /* shut up gcc */
533 * Wait for the mc146818A seconds counter to change. Read the i8254
534 * counter for each iteration since this is convenient and only
535 * costs a few usec of inaccuracy. The timing of the final reads
536 * of the counters almost matches the timing of the initial reads,
537 * so the main cause of inaccuracy is the varying latency from
538 * inside getit() or rtcin(RTC_STATUSA) to the beginning of the
539 * rtcin(RTC_SEC) that returns a changed seconds count. The
540 * maximum inaccuracy from this cause is < 10 usec on 486's.
544 if (!(rtcin(RTC_STATUSA) & RTCSA_TUP))
545 sec = rtcin(RTC_SEC);
546 count = cputimer_count();
547 tot_count += (int)(count - prev_count);
549 if (sec != start_sec)
556 * Read the cpu cycle counter. The timing considerations are
557 * similar to those for the i8254 clock.
560 tsc_freq = rdtsc() - old_tsc;
564 printf("TSC clock: %u Hz, ", tsc_freq);
565 printf("i8254 clock: %u Hz\n", tot_count);
571 printf("failed, using default i8254 clock of %u Hz\n",
573 return (cputimer_freq);
579 timer0_state = ACQUIRED;
580 timer1_state = ACQUIRED;
582 outb(TIMER_MODE, TIMER_SEL0 | TIMER_SWSTROBE | TIMER_16BIT);
583 outb(TIMER_CNTR0, 2); /* lsb */
584 outb(TIMER_CNTR0, 0); /* msb */
585 outb(TIMER_MODE, TIMER_SELX | TIMER_RATEGEN | TIMER_16BIT);
586 outb(TIMER_CNTRX, 0); /* lsb */
587 outb(TIMER_CNTRX, 0); /* msb */
588 outb(IO_PPI, inb(IO_PPI) | 1); /* bit 0: enable gate, bit 1: spkr */
595 /* Restore all of the RTC's "status" (actually, control) registers. */
596 writertc(RTC_STATUSB, RTCSB_24HR);
597 writertc(RTC_STATUSA, rtc_statusa);
598 writertc(RTC_STATUSB, rtc_statusb);
602 * Restore all the timers non-atomically (XXX: should be atomically).
604 * This function is called from apm_default_resume() to restore all the timers.
605 * This should not be necessary, but there are broken laptops that do not
606 * restore all the timers on resume.
611 i8254_restore(); /* restore timer_freq and hz */
612 rtc_restore(); /* reenable RTC interrupts */
616 * Initialize 8254 timer 0 early so that it can be used in DELAY().
624 * Can we use the TSC?
626 if (cpu_feature & CPUID_TSC)
632 * Initial RTC state, don't do anything unexpected
634 writertc(RTC_STATUSA, rtc_statusa);
635 writertc(RTC_STATUSB, RTCSB_24HR);
638 * Set the 8254 timer0 in TIMER_SWSTROBE mode and cause it to
639 * generate an interrupt, which we will ignore for now.
641 * Set the 8254 timer1 in TIMER_RATEGEN mode and load 0x0000
642 * (so it counts a full 2^16 and repeats). We will use this timer
646 freq = calibrate_clocks();
647 #ifdef CLK_CALIBRATION_LOOP
650 "Press a key on the console to abort clock calibration\n");
651 while (cncheckc() == -1)
657 * Use the calibrated i8254 frequency if it seems reasonable.
658 * Otherwise use the default, and don't use the calibrated i586
661 delta = freq > cputimer_freq ?
662 freq - cputimer_freq : cputimer_freq - freq;
663 if (delta < cputimer_freq / 100) {
664 #ifndef CLK_USE_I8254_CALIBRATION
667 "CLK_USE_I8254_CALIBRATION not specified - using default frequency\n");
668 freq = cputimer_freq;
670 cputimer_freq = freq;
671 cputimer_freq64_usec = (1000000LL << 32) / freq;
672 cputimer_freq64_nsec = (1000000000LL << 32) / freq;
676 "%d Hz differs from default of %d Hz by more than 1%%\n",
677 freq, cputimer_freq);
681 #ifndef CLK_USE_TSC_CALIBRATION
685 "CLK_USE_TSC_CALIBRATION not specified - using old calibration method\n");
689 if (tsc_present && tsc_freq == 0) {
691 * Calibration of the i586 clock relative to the mc146818A
692 * clock failed. Do a less accurate calibration relative
693 * to the i8254 clock.
695 u_int64_t old_tsc = rdtsc();
698 tsc_freq = rdtsc() - old_tsc;
699 #ifdef CLK_USE_TSC_CALIBRATION
701 printf("TSC clock: %u Hz (Method B)\n", tsc_freq);
707 * We can not use the TSC in SMP mode, until we figure out a
708 * cheap (impossible), reliable and precise (yeah right!) way
709 * to synchronize the TSCs of all the CPUs.
710 * Curse Intel for leaving the counter out of the I/O APIC.
715 * We can not use the TSC if we support APM. Precise timekeeping
716 * on an APM'ed machine is at best a fools pursuit, since
717 * any and all of the time spent in various SMM code can't
718 * be reliably accounted for. Reading the RTC is your only
719 * source of reliable time info. The i8254 looses too of course
720 * but we need to have some kind of time...
721 * We don't know at this point whether APM is going to be used
722 * or not, nor when it might be activated. Play it safe.
725 #endif /* NAPM > 0 */
727 #endif /* !defined(SMP) */
731 * Initialize the time of day register, based on the time base which is, e.g.
735 inittodr(time_t base)
737 unsigned long sec, days;
749 /* Look if we have a RTC present and the time is valid */
750 if (!(rtcin(RTC_STATUSD) & RTCSD_PWR))
753 /* wait for time update to complete */
754 /* If RTCSA_TUP is zero, we have at least 244us before next update */
756 while (rtcin(RTC_STATUSA) & RTCSA_TUP) {
762 #ifdef USE_RTC_CENTURY
763 year = readrtc(RTC_YEAR) + readrtc(RTC_CENTURY) * 100;
765 year = readrtc(RTC_YEAR) + 1900;
773 month = readrtc(RTC_MONTH);
774 for (m = 1; m < month; m++)
775 days += daysinmonth[m-1];
776 if ((month > 2) && LEAPYEAR(year))
778 days += readrtc(RTC_DAY) - 1;
780 for (y = 1970; y < year; y++)
781 days += DAYSPERYEAR + LEAPYEAR(y);
782 sec = ((( days * 24 +
783 readrtc(RTC_HRS)) * 60 +
784 readrtc(RTC_MIN)) * 60 +
786 /* sec now contains the number of seconds, since Jan 1 1970,
787 in the local time zone */
789 sec += tz.tz_minuteswest * 60 + (wall_cmos_clock ? adjkerntz : 0);
791 y = time_second - sec;
792 if (y <= -2 || y >= 2) {
793 /* badly off, adjust it */
802 printf("Invalid time in real time clock.\n");
803 printf("Check and reset the date immediately!\n");
807 * Write system time back to RTC
821 /* Disable RTC updates and interrupts. */
822 writertc(RTC_STATUSB, RTCSB_HALT | RTCSB_24HR);
824 /* Calculate local time to put in RTC */
826 tm -= tz.tz_minuteswest * 60 + (wall_cmos_clock ? adjkerntz : 0);
828 writertc(RTC_SEC, bin2bcd(tm%60)); tm /= 60; /* Write back Seconds */
829 writertc(RTC_MIN, bin2bcd(tm%60)); tm /= 60; /* Write back Minutes */
830 writertc(RTC_HRS, bin2bcd(tm%24)); tm /= 24; /* Write back Hours */
832 /* We have now the days since 01-01-1970 in tm */
833 writertc(RTC_WDAY, (tm+4)%7); /* Write back Weekday */
834 for (y = 1970, m = DAYSPERYEAR + LEAPYEAR(y);
836 y++, m = DAYSPERYEAR + LEAPYEAR(y))
839 /* Now we have the years in y and the day-of-the-year in tm */
840 writertc(RTC_YEAR, bin2bcd(y%100)); /* Write back Year */
841 #ifdef USE_RTC_CENTURY
842 writertc(RTC_CENTURY, bin2bcd(y/100)); /* ... and Century */
848 if (m == 1 && LEAPYEAR(y))
855 writertc(RTC_MONTH, bin2bcd(m + 1)); /* Write back Month */
856 writertc(RTC_DAY, bin2bcd(tm + 1)); /* Write back Month Day */
858 /* Reenable RTC updates and interrupts. */
859 writertc(RTC_STATUSB, rtc_statusb);
865 * Start both clocks running. DragonFly note: the stat clock is no longer
866 * used. Instead, 8254 based systimers are used for all major clock
867 * interrupts. statclock_disable is set by default.
875 struct intrec *clkdesc;
878 if (statclock_disable) {
880 * The stat interrupt mask is different without the
881 * statistics clock. Also, don't set the interrupt
882 * flag which would normally cause the RTC to generate
885 stat_imask = HWI_MASK | SWI_MASK;
886 rtc_statusb = RTCSB_24HR;
888 /* Setting stathz to nonzero early helps avoid races. */
889 stathz = RTC_NOPROFRATE;
890 profhz = RTC_PROFRATE;
893 /* Finish initializing 8253 timer 0. */
896 apic_8254_intr = isa_apic_irq(0);
898 if (apic_8254_intr >= 0 ) {
899 if (apic_int_type(0, 0) == 3)
902 /* look for ExtInt on pin 0 */
903 if (apic_int_type(0, 0) == 3) {
904 apic_8254_intr = apic_irq(0, 0);
905 setup_8254_mixed_mode();
907 panic("APIC_IO: Cannot route 8254 interrupt to CPU");
910 clkdesc = inthand_add("clk", apic_8254_intr, (inthand2_t *)clkintr,
911 NULL, &clk_imask, INTR_EXCL | INTR_FAST);
912 INTREN(1 << apic_8254_intr);
916 inthand_add("clk", 0, (inthand2_t *)clkintr, NULL, &clk_imask,
917 INTR_EXCL | INTR_FAST);
922 /* Initialize RTC. */
923 writertc(RTC_STATUSA, rtc_statusa);
924 writertc(RTC_STATUSB, RTCSB_24HR);
926 if (statclock_disable == 0) {
927 diag = rtcin(RTC_DIAG);
929 printf("RTC BIOS diagnostic error %b\n", diag, RTCDG_BITS);
932 if (isa_apic_irq(8) != 8)
933 panic("APIC RTC != 8");
936 inthand_add("rtc", 8, (inthand2_t *)rtcintr, NULL, &stat_imask,
937 INTR_EXCL | INTR_FAST);
945 writertc(RTC_STATUSB, rtc_statusb);
949 if (apic_8254_trial) {
951 int lastcnt = read_intr_count(apic_8254_intr);
954 * XXX this assumes the 8254 is the cpu timer. Force an
955 * 8254 Timer0 interrupt and wait 1/100s for it to happen,
956 * then see if we got it.
958 printf("APIC_IO: Testing 8254 interrupt delivery\n");
959 cputimer_intr_reload(2); /* XXX assumes 8254 */
960 base = cputimer_count();
961 while (cputimer_count() - base < cputimer_freq / 100)
963 if (read_intr_count(apic_8254_intr) - lastcnt == 0) {
965 * The MP table is broken.
966 * The 8254 was not connected to the specified pin
968 * Workaround: Limited variant of mixed mode.
970 INTRDIS(1 << apic_8254_intr);
971 inthand_remove(clkdesc);
972 printf("APIC_IO: Broken MP table detected: "
973 "8254 is not connected to "
974 "IOAPIC #%d intpin %d\n",
975 int_to_apicintpin[apic_8254_intr].ioapic,
976 int_to_apicintpin[apic_8254_intr].int_pin);
978 * Revoke current ISA IRQ 0 assignment and
979 * configure a fallback interrupt routing from
980 * the 8254 Timer via the 8259 PIC to the
981 * an ExtInt interrupt line on IOAPIC #0 intpin 0.
982 * We reuse the low level interrupt handler number.
984 if (apic_irq(0, 0) < 0) {
985 revoke_apic_irq(apic_8254_intr);
986 assign_apic_irq(0, 0, apic_8254_intr);
988 apic_8254_intr = apic_irq(0, 0);
989 setup_8254_mixed_mode();
990 inthand_add("clk", apic_8254_intr,
991 (inthand2_t *)clkintr,
992 NULL, &clk_imask, INTR_EXCL | INTR_FAST);
993 INTREN(1 << apic_8254_intr);
997 if (apic_int_type(0, 0) != 3 ||
998 int_to_apicintpin[apic_8254_intr].ioapic != 0 ||
999 int_to_apicintpin[apic_8254_intr].int_pin != 0) {
1000 printf("APIC_IO: routing 8254 via IOAPIC #%d intpin %d\n",
1001 int_to_apicintpin[apic_8254_intr].ioapic,
1002 int_to_apicintpin[apic_8254_intr].int_pin);
1005 "routing 8254 via 8259 and IOAPIC #0 intpin 0\n");
1013 read_intr_count(int vec)
1016 up = intr_countp[vec];
1023 setup_8254_mixed_mode()
1026 * Allow 8254 timer to INTerrupt 8259:
1027 * re-initialize master 8259:
1028 * reset; prog 4 bytes, single ICU, edge triggered
1030 outb(IO_ICU1, 0x13);
1031 outb(IO_ICU1 + 1, NRSVIDT); /* start vector (unused) */
1032 outb(IO_ICU1 + 1, 0x00); /* ignore slave */
1033 outb(IO_ICU1 + 1, 0x03); /* auto EOI, 8086 */
1034 outb(IO_ICU1 + 1, 0xfe); /* unmask INT0 */
1036 /* program IO APIC for type 3 INT on INT0 */
1037 if (ext_int_setup(0, 0) < 0)
1038 panic("8254 redirect via APIC pin0 impossible!");
1043 setstatclockrate(int newhz)
1045 if (newhz == RTC_PROFRATE)
1046 rtc_statusa = RTCSA_DIVIDER | RTCSA_PROF;
1048 rtc_statusa = RTCSA_DIVIDER | RTCSA_NOPROF;
1049 writertc(RTC_STATUSA, rtc_statusa);
1054 tsc_get_timecount(struct timecounter *tc)
1060 #ifdef KERN_TIMESTAMP
1061 #define KERN_TIMESTAMP_SIZE 16384
1062 static u_long tsc[KERN_TIMESTAMP_SIZE] ;
1063 SYSCTL_OPAQUE(_debug, OID_AUTO, timestamp, CTLFLAG_RD, tsc,
1064 sizeof(tsc), "LU", "Kernel timestamps");
1070 tsc[i] = (u_int32_t)rdtsc();
1073 if (i >= KERN_TIMESTAMP_SIZE)
1075 tsc[i] = 0; /* mark last entry */
1077 #endif /* KERN_TIMESTAMP */