4 # This is rc.conf - a file full of useful variables that you can set
5 # to change the default startup behavior of your system. You should
6 # not edit this file! Put any overrides into one of the ${rc_conf_files}
7 # instead and you will be able to update these defaults later without
8 # spamming your local configuration information.
10 # The ${rc_conf_files} files should only contain values which override
11 # values set in this file. This eases the upgrade path when defaults
12 # are changed and new features are added.
14 # All arguments must be in double or single quotes.
16 # $FreeBSD: src/etc/defaults/rc.conf,v 1.53.2.62 2003/02/12 03:56:46 gshapiro Exp $
18 ##############################################################
19 ### Important initial Boot-time options ####################
20 ##############################################################
22 swapfile="NO" # Set to name of swapfile if aux swapfile desired.
23 apm_enable="NO" # Set to YES to enable APM BIOS functions (or NO).
24 apmd_enable="NO" # Run apmd to handle APM event from userland.
25 apmd_flags="" # Flags to apmd (if enabled).
26 pccard_enable="NO" # Set to YES if you want to configure PCCARD devices.
27 pccard_mem="DEFAULT" # If pccard_enable=YES, this is card memory address.
28 pccard_beep="2" # pccard beep type.
29 pccard_ifconfig="NO" # Specialized pccard ethernet configuration (or NO).
30 pccardd_flags="-z" # Additional flags for pccardd.
31 pccard_conf="/etc/defaults/pccard.conf" # pccardd(8) config file
32 pccard_ether_delay="5" # Delay before trying to start dhclient in pccard_ether
33 local_startup="/usr/local/etc/rc.d /usr/X11R6/etc/rc.d" # startup script dirs.
34 script_name_sep=" " # Change if your startup scripts' names contain spaces
35 rc_conf_files="/etc/rc.conf /etc/rc.conf.local"
36 fsck_y_enable="NO" # Set to YES to do fsck -y if the initial preen fails.
38 ##############################################################
39 ### Network configuration sub-section ######################
40 ##############################################################
42 ### Basic network and firewall/security options: ###
43 hostname="" # Set this!
44 nisdomainname="NO" # Set to NIS domain if using NIS (or NO).
45 dhcp_program="/sbin/dhclient" # Path to dhcp client program.
46 dhcp_flags="" # Additional flags to pass to dhcp client.
47 firewall_enable="NO" # Set to YES to enable firewall functionality
48 firewall_script="/etc/rc.firewall" # Which script to run to set up the firewall
49 firewall_type="UNKNOWN" # Firewall type (see /etc/rc.firewall)
50 firewall_quiet="NO" # Set to YES to suppress rule display
51 firewall_logging="NO" # Set to YES to enable events logging
52 firewall_flags="" # Flags passed to ipfw when type is a file
53 ip_portrange_first="NO" # Set first dynamically allocated port
54 ip_portrange_last="NO" # Set last dynamically allocated port
55 ipsec_enable="NO" # Set to YES to run setkey on ipsec_file
56 ipsec_file="/etc/ipsec.conf" # Name of config file for setkey
57 natd_program="/sbin/natd" # path to natd, if you want a different one.
58 natd_enable="NO" # Enable natd (if firewall_enable == YES).
59 natd_interface="" # Public interface or IPaddress to use.
60 natd_flags="" # Additional flags for natd.
61 ipfilter_enable="NO" # Set to YES to enable ipfilter functionality
62 ipfilter_program="/sbin/ipf" # where the ipfilter program lives
63 ipfilter_rules="/etc/ipf.rules" # rules definition file for ipfilter, see
64 # /usr/src/contrib/ipfilter/rules for examples
65 ipfilter_flags="" # additional flags for ipfilter
66 ipnat_enable="NO" # Set to YES to enable ipnat functionality
67 ipnat_program="/sbin/ipnat" # where the ipnat program lives
68 ipnat_rules="/etc/ipnat.rules" # rules definition file for ipnat
69 ipnat_flags="" # additional flags for ipnat
70 ipmon_enable="NO" # Set to YES for ipmon; needs ipfilter or ipnat
71 ipmon_program="/sbin/ipmon" # where the ipfilter monitor program lives
72 ipmon_flags="-Ds" # typically "-Ds" or "-D /var/log/ipflog"
73 ipfs_enable="NO" # Set to YES to enable saving and restoring
74 # of state tables at shutdown and boot
75 ipfs_program="/sbin/ipfs" # where the ipfs program lives
76 ipfs_flags="" # additional flags for ipfs
77 tcp_extensions="YES" # Set to NO to turn off RFC1323 extensions.
78 log_in_vain="0" # >=1 to log connects to ports w/o listeners.
79 tcp_keepalive="YES" # Enable stale TCP connection timeout (or NO).
80 # For the following option you need to have TCP_DROP_SYNFIN set in your
81 # kernel. Please refer to LINT and NOTES for details.
82 tcp_drop_synfin="NO" # Set to YES to drop TCP packets with SYN+FIN
83 # NOTE: this violates the TCP specification
84 icmp_drop_redirect="NO" # Set to YES to ignore ICMP REDIRECT packets
85 icmp_log_redirect="NO" # Set to YES to log ICMP REDIRECT packets
86 network_interfaces="auto" # List of network interfaces (or "auto").
87 cloned_interfaces="" # List of cloned network interfaces to create.
88 #cloned_interfaces="gif0 gif1 gif2 gif3" # Pre-cloning GENERIC config.
89 ifconfig_lo0="inet 127.0.0.1" # default loopback device configuration.
90 #ifconfig_lo0_alias0="inet 127.0.0.254 netmask 0xffffffff" # Sample alias entry.
91 #ifconfig_ed0_ipx="ipx 0x00010010" # Sample IPX address family entry.
93 # If you have any sppp(4) interfaces above, you might also want to set
94 # the following parameters. Refer to spppcontrol(8) for their meaning.
95 sppp_interfaces="" # List of sppp interfaces.
96 #sppp_interfaces="isp0" # example: sppp over ISDN
97 #spppconfig_isp0="authproto=chap myauthname=foo myauthsecret='top secret' hisauthname=some-gw hisauthsecret='another secret'"
98 gif_interfaces="NO" # List of GIF tunnels (or "NO").
99 #gif_interfaces="gif0 gif1" # Examples typically for a router.
100 # Choose correct tunnel addrs.
101 #gifconfig_gif0="10.1.1.1 10.1.2.1" # Examples typically for a router.
102 #gifconfig_gif1="10.1.1.2 10.1.2.2" # Examples typically for a router.
104 # User ppp configuration.
105 ppp_enable="NO" # Start user-ppp (or NO).
106 ppp_mode="auto" # Choice of "auto", "ddial", "direct" or "dedicated".
107 # For details see man page for ppp(8). Default is auto.
108 ppp_nat="YES" # Use PPP's internal network address translation or NO.
109 ppp_profile="papchap" # Which profile to use from /etc/ppp/ppp.conf.
110 ppp_user="root" # Which user to run ppp as
112 ### Network daemon (miscellaneous) ###
113 syslogd_enable="YES" # Run syslog daemon (or NO).
114 syslogd_program="/usr/sbin/syslogd" # path to syslogd, if you want a different one.
115 syslogd_flags="-s" # Flags to syslogd (if enabled).
116 #syslogd_flags="-ss" # Syslogd flags to not bind an inet socket
117 inetd_enable="YES" # Run the network daemon dispatcher (YES/NO).
118 inetd_program="/usr/sbin/inetd" # path to inetd, if you want a different one.
119 inetd_flags="-wW" # Optional flags to inetd
121 # named. It may be possible to run named in a sandbox, man security for
124 named_enable="NO" # Run named, the DNS server (or NO).
125 named_program="/usr/sbin/named" # path to named, if you want a different one.
126 #named_flags="-u bind -g bind" # Flags for named
129 # kerberos. Do not run the admin daemons on slave servers
131 kerberos_server_enable="NO" # Run a kerberos master server (or NO).
132 kadmind_server_enable="NO" # Run kadmind (or NO)
133 kerberos5_server_enable="NO" # Run a kerberos 5 master server (or NO).
134 kerberos5_server="/usr/libexec/kdc" # path to kerberos 5 KDC
135 kadmind5_server_enable="NO" # Run kadmind (or NO)
136 kadmind5_server="/usr/libexec/k5admind" # path to kerberos 5 admin daemon
137 kerberos_stash="NO" # Is the kerberos master key stashed?
139 rwhod_enable="NO" # Run the rwho daemon (or NO).
140 rwhod_flags="" # Flags for rwhod
141 rarpd_enable="NO" # Run rarpd (or NO).
142 rarpd_flags="" # Flags to rarpd.
143 xtend_enable="NO" # Run the X-10 power controller daemon.
144 xtend_flags="" # Flags to xtend (if enabled).
145 pppoed_enable="NO" # Run the PPP over Ethernet daemon.
146 pppoed_provider="*" # Provider and ppp(8) config file entry.
147 pppoed_flags="-P /var/run/pppoed.pid" # Flags to pppoed (if enabled).
148 pppoed_interface="fxp0" # The interface that pppoed runs on.
149 sshd_enable="NO" # Enable sshd
150 sshd_program="/usr/sbin/sshd" # path to sshd, if you want a different one.
151 sshd_flags="" # Additional flags for sshd.
153 ### Network daemon (NFS): All need portmap_enable="YES" ###
154 amd_enable="NO" # Run amd service with $amd_flags (or NO).
155 amd_flags="-a /.amd_mnt -l syslog /host /etc/amd.map /net /etc/amd.map"
156 amd_map_program="NO" # Can be set to "ypcat -k amd.master"
157 nfs_client_enable="NO" # This host is an NFS client (or NO).
158 nfs_client_flags="-n 4" # Flags to nfsiod (if enabled).
159 nfs_access_cache="2" # Client cache timeout in seconds
160 nfs_server_enable="NO" # This host is an NFS server (or NO).
161 nfs_server_flags="-u -t -n 4" # Flags to nfsd (if enabled).
162 single_mountd_enable="NO" # Run mountd only (or NO).
163 mountd_flags="-r" # Flags to mountd (if NFS server enabled).
164 weak_mountd_authentication="NO" # Allow non-root mount requests to be served.
165 nfs_reserved_port_only="NO" # Provide NFS only on secure port (or NO).
166 nfs_bufpackets="" # bufspace (in packets) for client
167 rpc_lockd_enable="NO" # Run NFS rpc.lockd (*broken!*) if nfs_server.
168 rpc_statd_enable="YES" # Run NFS rpc.statd if nfs_server (or NO).
169 portmap_enable="NO" # Run the portmapper service (YES/NO).
170 portmap_program="/usr/sbin/portmap" # path to portmap, if you want a different one.
171 portmap_flags="" # Flags to portmap (if enabled).
172 rpc_ypupdated_enable="NO" # Run if NIS master and SecureRPC (or NO).
173 keyserv_enable="NO" # Run the SecureRPC keyserver (or NO).
174 keyserv_flags="" # Flags to keyserv (if enabled).
176 ### Network Time Services options: ###
177 timed_enable="NO" # Run the time daemon (or NO).
178 timed_flags="" # Flags to timed (if enabled).
179 ntpdate_enable="NO" # Run ntpdate to sync time on boot (or NO).
180 ntpdate_program="/usr/sbin/ntpdate" # path to ntpdate, if you want a different one.
181 ntpdate_flags="-b" # Flags to ntpdate (if enabled).
182 xntpd_enable="NO" # Run ntpd Network Time Protocol (or NO).
183 xntpd_program="/usr/sbin/ntpd" # path to ntpd, if you want a different one.
184 xntpd_flags="-p /var/run/ntpd.pid" # Flags to ntpd (if enabled).
186 # Network Information Services (NIS) options: All need portmap_enable="YES" ###
187 nis_client_enable="NO" # We're an NIS client (or NO).
188 nis_client_flags="" # Flags to ypbind (if enabled).
189 nis_ypset_enable="NO" # Run ypset at boot time (or NO).
190 nis_ypset_flags="" # Flags to ypset (if enabled).
191 nis_server_enable="NO" # We're an NIS server (or NO).
192 nis_server_flags="" # Flags to ypserv (if enabled).
193 nis_ypxfrd_enable="NO" # Run rpc.ypxfrd at boot time (or NO).
194 nis_ypxfrd_flags="" # Flags to rpc.ypxfrd (if enabled).
195 nis_yppasswdd_enable="NO" # Run rpc.yppasswdd at boot time (or NO).
196 nis_yppasswdd_flags="" # Flags to rpc.yppasswdd (if enabled).
198 ### Network routing options: ###
199 defaultrouter="NO" # Set to default gateway (or NO).
200 static_routes="" # Set to static route list (or leave empty).
201 gateway_enable="NO" # Set to YES if this host will be a gateway.
202 router_enable="NO" # Set to YES to enable a routing daemon.
203 router="/sbin/routed" # Name of routing daemon to use if enabled.
204 router_flags="-q" # Flags for routing daemon.
205 mrouted_enable="NO" # Do multicast routing (see /etc/mrouted.conf).
206 mrouted_flags="" # Flags for multicast routing daemon.
207 ipxgateway_enable="NO" # Set to YES to enable IPX routing.
208 ipxrouted_enable="NO" # Set to YES to run the IPX routing daemon.
209 ipxrouted_flags="" # Flags for IPX routing daemon.
210 arpproxy_all="NO" # replaces obsolete kernel option ARP_PROXYALL.
211 forward_sourceroute="NO" # do source routing (only if gateway_enable is set to "YES")
212 accept_sourceroute="NO" # accept source routed packets to us
214 ### ATM interface options: ###
215 atm_enable="NO" # Configure ATM interfaces (or NO).
216 #atm_netif_hea0="atm 1" # Network interfaces for physical interface.
217 #atm_sigmgr_hea0="uni31" # Signalling manager for physical interface.
218 #atm_prefix_hea0="ILMI" # NSAP prefix (UNI interfaces only) (or ILMI).
219 #atm_macaddr_hea0="NO" # Override physical MAC address (or NO).
220 #atm_arpserver_atm0="0x47.0005.80.999999.9999.9999.9999.999999999999.00" # ATMARP server address (or local).
221 #atm_scsparp_atm0="NO" # Run SCSP/ATMARP on network interface (or NO).
222 atm_pvcs="" # Set to PVC list (or leave empty).
223 atm_arps="" # Set to permanent ARP list (or leave empty).
225 ### ISDN interface options: (see also: /usr/share/examples/isdn) ###
226 isdn_enable="NO" # Enable the ISDN subsystem (or NO).
227 isdn_fsdev="NO" # Output device for fullscreen mode (or NO for daemon mode).
228 isdn_flags="-dn -d0x1f9" # Flags for isdnd
229 isdn_ttype="cons25" # terminal type for fullscreen mode
230 isdn_screenflags="NO" # screenflags for ${isdn_fsdev}
231 isdn_trace="NO" # Enable the ISDN trace subsystem (or NO).
232 isdn_traceflags="-f /var/tmp/isdntrace0" # Flags for isdntrace
234 ### Miscellaneous network options: ###
235 icmp_bmcastecho="NO" # respond to broadcast ping packets
237 ### IPv6 options: ###
238 ipv6_enable="NO" # Set to YES to set up for IPv6.
239 ipv6_network_interfaces="auto" # List of network interfaces (or "auto").
240 ipv6_defaultrouter="NO" # Set to IPv6 default gateway (or NO).
241 #ipv6_defaultrouter="2002:c058:6301::" # Use this for 6to4 (RFC 3068)
242 ipv6_static_routes="" # Set to static route list (or leave empty).
243 #ipv6_static_routes="xxx" # An example to set fec0:0000:0000:0006::/64
244 # route toward loopback interface.
245 #ipv6_route_xxx="fec0:0000:0000:0006:: -prefixlen 64 ::1"
246 ipv6_gateway_enable="NO" # Set to YES if this host will be a gateway.
247 ipv6_router_enable="NO" # Set to YES to enable an IPv6 routing daemon.
248 ipv6_router="/usr/sbin/route6d" # Name of IPv6 routing daemon.
249 ipv6_router_flags="" # Flags to IPv6 routing daemon.
250 #ipv6_router_flags="-l" # Example for route6d with only IPv6 site local
252 #ipv6_router_flags="-q" # If you want to run a routing daemon on an end
253 # node, you should stop advertisement.
254 #ipv6_network_interfaces="ed0 ep0" # Examples for router
255 # or static configuration for end node.
256 # Choose correct prefix value.
257 #ipv6_prefix_ed0="fec0:0000:0000:0001 fec0:0000:0000:0002" # Examples for rtr.
258 #ipv6_prefix_ep0="fec0:0000:0000:0003 fec0:0000:0000:0004" # Examples for rtr.
259 #ipv6_ifconfig_ed0="fec0:0:0:5::1 prefixlen 64" # Sample manual assign entry
260 #ipv6_ifconfig_ed0_alias0="fec0:0:0:5::2 prefixlen 64" # Sample alias entry.
261 ipv6_default_interface="NO" # Default output interface for scoped addrs.
262 # Now this works only for IPv6 link local
264 rtadvd_enable="NO" # Set to YES to enable an IPv6 router
265 # advertisement daemon. If set to YES,
266 # this router becomes a possible candidate
267 # IPv6 default router for local subnets.
268 rtadvd_interfaces="" # Interfaces rtadvd sends RA packets.
269 mroute6d_enable="NO" # Do IPv6 multicast routing.
270 mroute6d_program="/usr/local/sbin/pim6dd" # Name of IPv6 multicast
271 # routing daemon. You need to
272 # install it from package or
274 mroute6d_flags="" # Flags to IPv6 multicast routing daemon.
275 stf_interface_ipv4addr="" # Local IPv4 addr for 6to4 IPv6 over IPv4
276 # tunneling interface. Specify this entry
277 # to enable 6to4 interface.
278 stf_interface_ipv4plen="0" # Prefix length for 6to4 IPv4 addr,
279 # to limit peer addr range. Effective value
281 stf_interface_ipv6_ifid="0:0:0:1" # IPv6 interface id for stf0.
282 # If you like, you can set "AUTO" for this.
283 stf_interface_ipv6_slaid="0000" # IPv6 Site Level Aggregator for stf0
284 ipv6_faith_prefix="NO" # Set faith prefix to enable a FAITH
285 # IPv6-to-IPv4 TCP translator. You also need
287 ipv6_ipv4mapping="YES" # Set to "NO" to disable IPv4 mapped IPv6 addr
288 # communication. (like ::ffff:a.b.c.d)
289 ipv6_firewall_enable="NO" # Set to YES to enable IPv6 firewall
291 ipv6_firewall_script="/etc/rc.firewall6" # Which script to run to set up the IPv6 firewall
292 ipv6_firewall_type="UNKNOWN" # IPv6 Firewall type (see /etc/rc.firewall6)
293 ipv6_firewall_quiet="NO" # Set to YES to suppress rule display
294 ipv6_firewall_logging="NO" # Set to YES to enable events logging
295 ipv6_firewall_flags="" # Flags passed to ip6fw when type is a file
296 ipv6_ipfilter_rules="/etc/ipf6.rules" # rules definition file for ipfilter,
297 # see /usr/src/contrib/ipfilter/rules
300 ##############################################################
301 ### System console options #################################
302 ##############################################################
304 keymap="NO" # keymap in /usr/share/syscons/keymaps/* (or NO).
305 keyrate="NO" # keyboard rate to: slow, normal, fast (or NO).
306 keybell="NO" # bell to duration.pitch or normal or visual (or NO).
307 keychange="NO" # function keys default values (or NO).
308 cursor="NO" # cursor type {normal|blink|destructive} (or NO).
309 scrnmap="NO" # screen map in /usr/share/syscons/scrnmaps/* (or NO).
310 font8x16="NO" # font 8x16 from /usr/share/syscons/fonts/* (or NO).
311 font8x14="NO" # font 8x14 from /usr/share/syscons/fonts/* (or NO).
312 font8x8="NO" # font 8x8 from /usr/share/syscons/fonts/* (or NO).
313 blanktime="300" # blank time (in seconds) or "NO" to turn it off.
314 saver="NO" # screen saver: Uses /modules/${saver}_saver.ko
315 moused_enable="NO" # Run the mouse daemon.
316 moused_type="auto" # See man page for rc.conf(5) for available settings.
317 moused_port="/dev/psm0" # Set to your mouse port.
318 moused_flags="" # Any additional flags to moused.
319 mousechar_start="NO" # if 0xd0-0xd3 default range is occuped in your
320 # language code table, specify alternative range
321 # start like mousechar_start=3, see vidcontrol(1)
322 allscreens_flags="" # Set this vidcontrol mode for all virtual screens
323 allscreens_kbdflags="" # Set this kbdcontrol mode for all virtual screens
326 ##############################################################
327 ### Mail Transfer Agent (MTA) options ######################
328 ##############################################################
330 mta_start_script="/etc/rc.sendmail"
331 # Script to start your chosen MTA, called by /etc/rc.
332 # Settings for /etc/rc.sendmail:
333 sendmail_enable="YES" # Run the sendmail inbound daemon (YES/NO/NONE).
334 # If NONE, don't start any sendmail processes.
335 sendmail_flags="-L sm-mta -bd -q30m" # Flags to sendmail (as a server)
336 sendmail_submit_enable="YES" # Start a localhost-only MTA for mail submission
337 sendmail_submit_flags="-L sm-mta -bd -q30m -ODaemonPortOptions=Addr=localhost"
338 # Flags for localhost-only MTA
339 sendmail_outbound_enable="YES" # Dequeue stuck mail (YES/NO).
340 sendmail_outbound_flags="-L sm-queue -q30m" # Flags to sendmail (outbound only)
341 sendmail_msp_queue_enable="YES" # Dequeue stuck clientmqueue mail (YES/NO).
342 sendmail_msp_queue_flags="-L sm-msp-queue -Ac -q30m"
343 # Flags for sendmail_msp_queue daemon.
346 ##############################################################
347 ### Miscellaneous administrative options ###################
348 ##############################################################
350 cron_enable="YES" # Run the periodic job daemon.
351 cron_program="/usr/sbin/cron" # Which cron executable to run (if enabled).
352 cron_flags="" # Which options to pass to the cron daemon.
353 lpd_enable="NO" # Run the line printer daemon.
354 lpd_program="/usr/sbin/lpd" # path to lpd, if you want a different one.
355 lpd_flags="" # Flags to lpd (if enabled).
356 usbd_enable="NO" # Run the usbd daemon.
357 usbd_flags="" # Flags to usbd (if enabled).
358 dumpdev="NO" # Device name to crashdump to (or NO).
359 dumpdir="/var/crash" # Directory where crash dumps are to be stored
360 savecore_flags="" # Used if dumpdev is enabled above, and present.
361 enable_quotas="NO" # turn on quotas on startup (or NO).
362 check_quotas="YES" # Check quotas on startup (or NO).
363 accounting_enable="NO" # Turn on process accounting (or NO).
364 ibcs2_enable="NO" # Ibcs2 (SCO) emulation loaded at startup (or NO).
365 ibcs2_loaders="coff" # List of additional Ibcs2 loaders (or NO).
366 linux_enable="NO" # Linux binary compatibility loaded at startup (or NO).
367 svr4_enable="NO" # SysVR4 emulation loaded at startup (or NO).
368 osf1_enable="NO" # Alpha OSF/1 emulation loaded at startup (or NO).
369 rand_irqs="NO" # Stir the entropy pool (like "5 11" or NO).
370 clear_tmp_enable="NO" # Clear /tmp at startup.
371 ldconfig_insecure="NO" # Set to YES to disable ldconfig security checks
372 ldconfig_paths="/usr/lib/compat /usr/X11R6/lib /usr/local/lib"
373 # shared library search paths
374 ldconfig_paths_aout="/usr/lib/compat/aout /usr/X11R6/lib/aout /usr/local/lib/aout"
375 # a.out shared library search paths
376 kern_securelevel_enable="NO" # kernel security level (see init(8)),
377 kern_securelevel="-1" # range: -1..3 ; `-1' is the most insecure
378 update_motd="YES" # update version info in /etc/motd (or NO)
379 start_vinum="NO" # set to YES to start vinum
380 unaligned_print="YES" # print unaligned access warnings on the alpha (or NO).
382 ##############################################################
383 ### Define source_rc_confs, the mechanism used by /etc/rc.* ##
384 ### scripts to source rc_conf_files overrides safely. ##
385 ##############################################################
387 if [ -z "${source_rc_confs_defined}" ]; then
388 source_rc_confs_defined=yes
390 local i sourced_files
391 for i in ${rc_conf_files}; do
392 case ${sourced_files} in
396 sourced_files="${sourced_files}:$i:"