usr.sbin/fstyp: Add device name to HAMMER2 label for autofs -media mount
[dragonfly.git] / Makefile.inc1
1 #
2 # $FreeBSD: src/Makefile.inc1,v 1.141.2.62 2003/04/06 19:54:00 dwmalone Exp $
3 #
4 # This file defines the user-driven targets.
5 #
6 # Standard targets are documented in the makefiles in /usr/share/mk and include:
7 #       obj depend all install clean cleandepend cleanobj
8 #
9 # Build-time options are documented in make.conf(5).
10 #
11
12 DFLYVERSION!=   awk '/^\#define[[:blank:]]__DragonFly_version/ {print $$3}' \
13                 < ${.CURDIR}/sys/sys/param.h
14
15 OSREL!=         echo ${DFLYVERSION} | \
16                 awk '{a=int($$1/100000); b=int(($$1-(a*100000))/100); \
17                 print a "." b}'
18
19 # Put initial settings here.
20 SUBDIR=
21
22 # /libexec/ld-elf.so.2 needs to be installed first
23 # Otherwise, install(1) beeing a dynamically linked binary will fail
24 # during the first upgrade from a static to a dynamic world
25 .if exists(${.CURDIR}/libexec)
26 SUBDIR+= libexec
27 .endif
28
29 # We need to do include and lib early.
30 #
31 .if exists(${.CURDIR}/include)
32 SUBDIR+= include
33 .endif
34 .if exists(${.CURDIR}/lib)
35 SUBDIR+= lib
36 .endif
37
38 .if exists(${.CURDIR}/bin)
39 SUBDIR+= bin
40 .endif
41 .if exists(${.CURDIR}/games) && !defined(NO_GAMES)
42 SUBDIR+= games
43 .endif
44 .if exists(${.CURDIR}/gnu)
45 SUBDIR+= gnu
46 .endif
47 .if exists(${.CURDIR}/sbin)
48 SUBDIR+= sbin
49 .endif
50 .if exists(${.CURDIR}/share) && !defined(NO_SHARE)
51 SUBDIR+= share
52 .endif
53 .if exists(${.CURDIR}/sys)
54 SUBDIR+= sys
55 .endif
56 .if exists(${.CURDIR}/usr.bin)
57 SUBDIR+= usr.bin
58 .endif
59 .if exists(${.CURDIR}/usr.sbin)
60 SUBDIR+= usr.sbin
61 .endif
62
63 .if exists(${.CURDIR}/etc)
64 SUBDIR+= etc
65 .endif
66
67 # These are last, since it is nice to at least get the base system
68 # rebuilt before you do them.
69 .if defined(LOCAL_DIRS)
70 .for _DIR in ${LOCAL_DIRS}
71 .if exists(${.CURDIR}/${_DIR}) & exists(${.CURDIR}/${_DIR}/Makefile)
72 SUBDIR+= ${_DIR}
73 .endif
74 .endfor
75 .endif
76
77 .if defined(SUBDIR_OVERRIDE)
78 SUBDIR=         ${SUBDIR_OVERRIDE}
79 .endif
80
81 .if defined(NOCLEANDIR)
82 CLEANDIR=       clean cleandepend
83 .else
84 CLEANDIR=       cleandir
85 .endif
86
87 .if defined(NO_CLEAN)
88 NOCLEAN=        # defined
89 .endif
90
91 # Object directory base in primary make.  Note that when we rerun make
92 # from inside this file we change MAKEOBJDIRPREFIX to the appropriate
93 # subdirectory because the rest of the build system needs it that way.
94 # The original object directory base is saved in OBJTREE.
95 #
96 MAKEOBJDIRPREFIX?=      /usr/obj
97 OBJTREE?=               ${MAKEOBJDIRPREFIX}
98
99 # Used for stage installs and pathing
100 #
101 DESTDIRBASE:=           ${OBJTREE}${.CURDIR}
102
103 # Remove DESTDIR from MAKEFLAGS.  It is present in the environment
104 # anyhow, and we need to be able to override it for stage installs
105 .MAKEFLAGS:=    ${.MAKEFLAGS:NDESTDIR=*}
106
107 # This section sets the tools used to build the world/kernel
108 WORLD_CCVER?=           gcc80
109 WORLD_LDVER?=           ld.gold
110 WORLD_BINUTILSVER?=     binutils227
111
112 # Set the backup parameters if they are not already defined
113 #
114 WORLD_BACKUP?=          /var/backups/world_backup
115 AUTO_BACKUP?=           ${OBJTREE}/world_backup/${DESTDIR}
116
117 TARGET_ARCH?=   ${MACHINE_ARCH}
118 .if ${TARGET_ARCH} == ${MACHINE_ARCH}
119 TARGET?=        ${MACHINE}
120 .else
121 TARGET?=        ${TARGET_ARCH}
122 .endif
123 .if make(buildworld)
124 BUILD_ARCH!=    sysctl -n hw.machine_arch
125
126 # temporary until everybody has converted to x86_64
127 .if ${BUILD_ARCH} == "amd64"
128 BUILD_ARCH=     x86_64
129 .endif
130
131 .if ${MACHINE_ARCH} != ${BUILD_ARCH}
132 .error To cross-build, set TARGET_ARCH.
133 .endif
134 .endif
135
136 # XXX this is ugly and we need to come up with a nicer solution
137 .if !defined(TARGET_PLATFORM)
138 .if ${TARGET_ARCH} == "x86_64"
139 TARGET_PLATFORM= pc64
140 .else
141 .error Unknown target architecture.
142 .endif
143 .endif
144
145 THREAD_LIB?=    thread_xu
146
147 # BTOOLS        (Natively built) All non-cross-development tools that the
148 #               main build needs.  This includes things like 'mkdir' and 'rm'.
149 #               We will not use the native system's exec path once we start
150 #               on WORLD.  (bootstrap-tools and build-tools or BTOOLS)
151 #
152 # CTOOLS        (Natively built) Cross development tools which are specific
153 #               to the target architecture.
154 #
155 # WORLD         (Cross built) Our ultimate buildworld, using only BTOOLS and
156 #               CTOOLS.
157 #
158 # MACHINE_PLATFORM      Platform Architecture we are building on
159 # MACHINE               Machine Architecture (usually the same as MACHINE_ARCH)
160 # MACHINE_ARCH          CPU Architecture we are building on
161 #
162 # TARGET_PLATFORM       Platform Architecture we are building for
163 # TARGET                Machine Architecture we are building for
164 # TARGET_ARCH           CPU Architecture we are building for
165 #
166 BTOOLSDEST=     ${DESTDIRBASE}/btools_${MACHINE_ARCH}
167 CTOOLSDEST=     ${DESTDIRBASE}/ctools_${MACHINE_ARCH}_${TARGET_ARCH}
168 WORLDDEST=      ${DESTDIRBASE}/world_${TARGET_ARCH}
169
170 # The bootstrap-tools path is used by the bootstrap-tools, build-tools, and
171 # cross-tools stages to augment the existing command path to access newer
172 # versions of certain utilities such as 'patch' that the cross-tools stage
173 # might expect.
174 #
175 BTOOLSPATH= ${BTOOLSDEST}/usr/sbin:${BTOOLSDEST}/usr/bin:${BTOOLSDEST}/sbin:${BTOOLSDEST}/bin
176
177 # The cross-tools path containing the cross-tools to cross build the
178 # ultimate world.
179 #
180 CTOOLSPATH= ${CTOOLSDEST}/usr/sbin:${CTOOLSDEST}/usr/bin:${CTOOLSDEST}/sbin:${CTOOLSDEST}/bin
181
182 # The strict temporary command path contains all binaries required
183 # by the buildworld system after the cross-tools stage.
184 #
185 # NOTE: Append '/usr/local/bin:/usr/pkg/bin' to support external compilers.
186 #       See compilers.conf(5) man page for more info.
187 #
188 STRICTTMPPATH= ${CTOOLSPATH}:${BTOOLSPATH}:/usr/local/bin:/usr/pkg/bin
189
190 TMPDIR?=        /tmp
191 TMPPID!=        echo $$$$
192
193 #
194 # Building a world goes through the following stages
195 #
196 # 1. bootstrap-tool stage [BMAKE]
197 #       This stage is responsible for creating programs that
198 #       are needed for backward compatibility reasons. They
199 #       are not built as cross-tools.
200 # 2. build-tool stage [TMAKE]
201 #       This stage is responsible for creating the object
202 #       tree and building any tools that are needed during
203 #       the build process.
204 # 3. cross-tool stage [XMAKE]
205 #       This stage is responsible for creating any tools that
206 #       are needed for cross-builds. A cross-compiler is one
207 #       of them.
208 # 4. world stage [WMAKE]
209 #       This stage actually builds the world.
210 # 5. install stage (optional) [IMAKE]
211 #       This stage installs a previously built world.
212 #
213 # In all cases we must carefully adjust the environment so the proper
214 # tools and header files are used.
215 #
216 # NOTE: The M4 environment variable is used by the [f]lex binary to
217 #       override the location of the 'm4' binary.  The override is
218 #       needed for certain buildworld version transitions, specifically
219 #       past a certain point in 3.3 because the older /usr/bin/m4 will
220 #       generate output that will blow up the newer [f]lex/yacc/bison
221 #       utilities.
222 #
223
224 # bootstrap-tool stage
225 #
226 BMAKEENV=       MAKEOBJDIRPREFIX=${BTOOLSDEST} \
227                 OBJTREE=${OBJTREE} \
228                 DESTDIR=${BTOOLSDEST} \
229                 LC_ALL=C \
230                 PATH=${BTOOLSPATH}:${PATH} \
231                 M4=${BTOOLSDEST}/usr/bin/m4 \
232                 INSTALL="sh ${.CURDIR}/tools/install.sh"
233
234 BMAKE=          ${BMAKEENV} make -f Makefile.inc1 -DBOOTSTRAPPING \
235                 -DNOMAN -DNOPIC -DNOPROFILE -DNOSHARED \
236                 -DNO_WERROR -DNO_NLS -DSYSBUILD
237
238 # build-tool stage
239 #
240 TMAKEENV=       MAKEOBJDIRPREFIX=${BTOOLSDEST} \
241                 OBJTREE=${OBJTREE} \
242                 DESTDIR= \
243                 LC_ALL=C \
244                 PATH=${BTOOLSPATH}:${PATH} \
245                 M4=${BTOOLSDEST}/usr/bin/m4 \
246                 INSTALL="sh ${.CURDIR}/tools/install.sh"
247
248 TMAKE=          ${TMAKEENV} make -f Makefile.inc1 -DBOOTSTRAPPING \
249                 -DNOSHARED -DSYSBUILD
250
251 # cross-tool stage
252 #
253 # note: TOOLS_PREFIX points to the obj root holding the cross
254 #       compiler binaries, while USRDATA_PREFIX points to the obj root
255 #       holding the target environment (and also determines where cross-built
256 #       libraries, crt*.o, and include files are installed).
257 #
258 XMAKEENV=       MAKEOBJDIRPREFIX=${CTOOLSDEST} \
259                 OBJTREE=${OBJTREE} \
260                 DESTDIR=${CTOOLSDEST} \
261                 LC_ALL=C \
262                 _SHLIBDIRPREFIX=${CTOOLSDEST} \
263                 INSTALL="sh ${.CURDIR}/tools/install.sh" \
264                 TOOLS_PREFIX=${CTOOLSDEST} \
265                 USRDATA_PREFIX=${WORLDDEST} \
266                 SELECT_LINKER=${WORLD_LDVER} \
267                 M4=${BTOOLSDEST}/usr/bin/m4 \
268                 PATH=${BTOOLSPATH}:${PATH}
269
270 XMAKE=          ${XMAKEENV} make -f Makefile.inc1 -DNO_GDB \
271                 -DBOOTSTRAPPING -DNOMAN -DNOSHARED -DSYSBUILD
272
273 # world stage, note the strict path and note that TOOLS_PREFIX is left
274 # unset and USRDATA_PREFIX (which defaults to TOOLS_PREFIX) is set to empty,
275 # which is primarily for the compiler so it targets / (e.g. /usr/<blah>)
276 # for both binary and library paths, even though it is being compiled to
277 # WORLDDEST.  None of the programs in the world stage are ever actually
278 # executed during the buildworld/installworld.
279 #
280 CROSSENV=       MAKEOBJDIRPREFIX=${WORLDDEST} \
281                 OBJTREE=${OBJTREE} \
282                 MACHINE_ARCH=${TARGET_ARCH} \
283                 MACHINE=${TARGET} \
284                 MACHINE_PLATFORM=${TARGET_PLATFORM} \
285                 LC_ALL=C \
286                 OBJFORMAT_PATH=${CTOOLSDEST} \
287                 HOST_CCVER=${HOST_CCVER} \
288                 CCVER=${WORLD_CCVER} \
289                 LDVER=${WORLD_LDVER} \
290                 BINUTILSVER=${WORLD_BINUTILSVER}
291
292 WMAKEENV=       ${CROSSENV} \
293                 WORLDBUILD=1 \
294                 DESTDIR=${WORLDDEST} \
295                 _SHLIBDIRPREFIX=${WORLDDEST} \
296                 INSTALL="sh ${.CURDIR}/tools/install.sh" \
297                 M4=${BTOOLSDEST}/usr/bin/m4 \
298                 PATH=${STRICTTMPPATH}
299
300 WMAKE=          ${WMAKEENV} make -f Makefile.inc1 -DSYSBUILD
301
302 # install stage
303 #
304 IMAKEENV=       ${CROSSENV} \
305                 PATH=${STRICTTMPPATH}
306 IMAKE=          ${IMAKEENV} make -f Makefile.inc1 -DSYSBUILD
307
308 # kernel stage
309 #
310 KMAKEENV=       ${WMAKEENV}
311
312 # buildworld
313 #
314 # Attempt to rebuild the entire system, with reasonable chance of
315 # success, regardless of how old your existing system is.
316 #
317 _worldtmp: _cleantmp _mtreetmp
318 .ORDER: _cleantmp _mtreetmp
319
320 _cleantmp:
321 .if !defined(NOCLEAN)
322         rm -rf ${BTOOLSDEST} ${CTOOLSDEST} ${WORLDDEST}
323 .else
324         # XXX - These two can depend on any header file.
325         rm -f ${OBJTREE}${.CURDIR}/usr.bin/kdump/ioctl.c
326         rm -f ${OBJTREE}${.CURDIR}/usr.bin/truss/ioctl.c
327 .endif
328
329 _mtreetmp:
330         @echo
331         @echo "--------------------------------------------------------------"
332         @echo ">>> Rebuilding the temporary build tree"
333         @echo "--------------------------------------------------------------"
334         mkdir -p ${DESTDIRBASE} ${BTOOLSDEST} ${CTOOLSDEST} ${WORLDDEST}
335 .for _dir in ${WORLDDEST} ${BTOOLSDEST} ${CTOOLSDEST}
336         mtree -deU -f ${.CURDIR}/etc/mtree/BSD.root.dist        \
337                 -p ${_dir}/  > /dev/null
338         mtree -deU -f ${.CURDIR}/etc/mtree/BSD.usr.dist         \
339                 -p ${_dir}/usr > /dev/null
340 .endfor
341         mtree -deU -f ${.CURDIR}/etc/mtree/BSD.include.dist     \
342                 -p ${WORLDDEST}/usr/include > /dev/null
343         ${LN} -sf ${.CURDIR}/sys ${WORLDDEST}
344
345 _bwinit:
346         @echo "--------------------------------------------------------------"
347         @echo ">>> starting buildworld target"
348         @echo "--------------------------------------------------------------"
349 _bootstrap-tools:
350         @echo
351         @echo "--------------------------------------------------------------"
352         @echo ">>> stage 1: bootstrap tools"
353         @echo "--------------------------------------------------------------"
354         cd ${.CURDIR}; ${BMAKE} bootstrap-tools
355 _cleanobj:
356         @echo
357         @echo "--------------------------------------------------------------"
358         @echo ">>> stage 2a: cleaning up the object tree"
359         @echo "--------------------------------------------------------------"
360         cd ${.CURDIR}; ${WMAKE} ${CLEANDIR:S/^/par-/}
361 _obj:
362         @echo
363         @echo "--------------------------------------------------------------"
364         @echo ">>> stage 2b: rebuilding the object tree"
365         @echo "--------------------------------------------------------------"
366         cd ${.CURDIR}; ${WMAKE} par-obj
367 _build-tools:
368         @echo
369         @echo "--------------------------------------------------------------"
370         @echo ">>> stage 2c: build tools"
371         @echo "--------------------------------------------------------------"
372         cd ${.CURDIR}; ${TMAKE} build-tools
373 _cross-tools:
374         @echo
375         @echo "--------------------------------------------------------------"
376         @echo ">>> stage 3: cross tools"
377         @echo "--------------------------------------------------------------"
378         cd ${.CURDIR}; ${XMAKE} cross-tools
379 _includes:
380         @echo
381         @echo "--------------------------------------------------------------"
382         @echo ">>> stage 4a: populating ${WORLDDEST}/usr/include"
383         @echo "--------------------------------------------------------------"
384         cd ${.CURDIR}; ${WMAKE} SHARED=symlinks par-includes
385 _libraries:
386         @echo
387         @echo "--------------------------------------------------------------"
388         @echo ">>> stage 4b: building libraries"
389         @echo "--------------------------------------------------------------"
390         cd ${.CURDIR}; ${WMAKE} -DNOHTML -DNOMAN -DNOFSCHG libraries
391 _depend:
392         @echo
393         @echo "--------------------------------------------------------------"
394         @echo ">>> stage 4c: make dependencies"
395         @echo "--------------------------------------------------------------"
396         cd ${.CURDIR}; ${WMAKE} par-depend
397 everything:
398         @echo
399         @echo "--------------------------------------------------------------"
400         @echo ">>> stage 4d: building everything"
401         @echo "--------------------------------------------------------------"
402         cd ${.CURDIR}; ${WMAKE} all
403 _initrd:
404         @echo
405         @echo "--------------------------------------------------------------"
406         @echo ">>> stage 5: building rescue and initrd"
407         @echo "--------------------------------------------------------------"
408         cd ${.CURDIR}/initrd; ${WMAKEENV} make all
409 _bwdone:
410         @echo "--------------------------------------------------------------"
411         @echo ">>> buildworld target complete"
412         @echo "--------------------------------------------------------------"
413 _qwinit:
414         @echo "--------------------------------------------------------------"
415         @echo ">>> starting quickworld target"
416         @echo "--------------------------------------------------------------"
417 _qwdone:
418         @echo "--------------------------------------------------------------"
419         @echo ">>> quickworld target complete"
420         @echo "--------------------------------------------------------------"
421 _iwinit:
422         @echo "--------------------------------------------------------------"
423         @echo ">>> starting installworld target"
424         @echo "--------------------------------------------------------------"
425
426 # note: buildworld no longer depends on _cleanobj because we rm -rf the
427 # entire object tree and built the bootstrap tools in a different location.
428 #
429 # buildworld    - build everything from scratch
430 # quickworld    - skip the bootstrap, build, and cross-build steps
431 # realquickworld - skip the bootstrap, build, crossbuild, and depend step.
432 #
433 # note: we include _obj in realquickworld to prevent accidental creation
434 # of files in /usr/src.
435
436 WMAKE_TGTS=
437 .if !defined(SUBDIR_OVERRIDE)
438 WMAKE_TGTS+=    _worldtmp _bootstrap-tools
439 .endif
440 WMAKE_TGTS+=    _obj _build-tools
441 .if !defined(SUBDIR_OVERRIDE)
442 WMAKE_TGTS+=    _cross-tools
443 .endif
444 WMAKE_TGTS+=    _includes _libraries _depend everything _initrd
445
446 .if defined(WMAKE_TGTS_OVERRIDE)
447 SUBDIR=
448 WMAKE_TGTS=     ${WMAKE_TGTS_OVERRIDE}
449 .endif
450
451 QMAKE_TGTS=     _mtreetmp _obj _includes _libraries _depend everything _initrd
452
453 buildworld: _bwinit ${WMAKE_TGTS} _bwdone
454
455 quickworld: _qwinit ${QMAKE_TGTS} _qwdone
456
457 realquickworld: _qwinit _mtreetmp _obj _includes _libraries everything _qwdone
458
459 crossworld: _worldtmp _bootstrap-tools _obj _build-tools _cross-tools
460
461 GENLOGDIR=      /usr/obj/${.CURDIR}
462 .ORDER: build-all install-all
463
464 # build-all
465 #
466 # build
467 build-all:
468         @echo "Building world, log file in ${GENLOGDIR}/bw.out"
469         @mkdir -p ${GENLOGDIR}
470         @(cd ${.CURDIR}; ${MAKE} -j `sysctl -n hw.ncpu` buildworld > ${GENLOGDIR}/bw.out 2>&1)
471         @sync
472         @echo "Building kernel, log file in ${GENLOGDIR}/bk.out"
473         @(cd ${.CURDIR}; ${MAKE} -j `sysctl -n hw.ncpu` buildkernel > ${GENLOGDIR}/bk.out 2>&1)
474         @echo "build-all completed ok"
475         @sync
476
477 install-all:
478         @echo "Installing kernel, log file in ${GENLOGDIR}/bk.out"
479         @mkdir -p ${GENLOGDIR}
480         @(cd ${.CURDIR}; ${MAKE} -j 1 installkernel >> ${GENLOGDIR}/bk.out 2>&1)
481         @sync
482         @echo "Installing world, log file in ${GENLOGDIR}/bw.out"
483         @(cd ${.CURDIR}; ${MAKE} -j 1 installworld >> ${GENLOGDIR}/bw.out 2>&1)
484         @sync
485         echo "Upgrading world"
486         @(cd ${.CURDIR}; ${MAKE} -j 1 upgrade >> ${GENLOGDIR}/bw.out 2>&1)
487         @sync
488         @echo "install-all completed ok.  reboot recommended and after that, "
489         @echo "if doing a major upgrade, pkg upgrade -f"
490
491 .ORDER: _bwinit ${WMAKE_TGTS} _bwdone
492 .ORDER: _obj _includes
493 .ORDER: _qwinit _mtreetmp _obj
494 .ORDER: installcheck backupworld-auto
495 .ORDER: everything _qwdone
496
497
498 # installcheck
499 #
500 # Checks to be sure system is ready for installworld
501 #
502 installcheck: _iwinit
503 .for _user in _pflogd
504         @pw usershow ${_user} >/dev/null || { \
505             echo "You need to run 'make preupgrade' first."; \
506             /usr/bin/false; \
507         }
508 .endfor
509 .for _group in _pflogd authpf
510         @pw groupshow ${_group} >/dev/null || { \
511             echo "You need to run 'make preupgrade' first."; \
512             /usr/bin/false; \
513         }
514 .endfor
515 .if !defined(OVERRIDE_CHECKS)
516 .if !defined(DESTDIR) || ${DESTDIR} == "" || ${DESTDIR} == "/"
517         @case `uname -r` in \
518             1.2*|1.3-*|1.3.*|1.4.*|1.5.0-*|1.5.1-*|1.5.2-*|1.5.3-*) \
519                 echo "You must upgrade your kernel to at least 1.5.4" \
520                      "and reboot before you can safely installworld," \
521                      "due to libc/system call ABI changes."; \
522                 /usr/bin/false; \
523         esac
524         @case `uname -r` in \
525             1.*|2.*|3.0*|3.1*|3.2*|3.3*|3.4*|3.5*|3.6*) \
526                 echo "The system is too old for a normal installworld," \
527                      "you need to use 'installworld-force'."; \
528                 /usr/bin/false; \
529         esac
530 .endif
531 .endif
532
533 # installworld
534 #
535 # Backs up the current world if ${AUTO_BACKUP} is writable.
536 # Installs everything compiled by a 'buildworld'.
537 #
538 installworld: installcheck
539         -@mkdir -p ${AUTO_BACKUP} > /dev/null 2>&1
540         @cd ${.CURDIR}; \
541             (touch ${AUTO_BACKUP}/.updating > /dev/null 2>&1 && \
542              ${IMAKE} backupworld-auto) || \
543             echo "Cannot write to ${AUTO_BACKUP} - world not backed up"
544
545         cd ${.CURDIR}; ${IMAKE} re${.TARGET:S/world$//}
546         ${INSTALL} -o root -g wheel -m 644 ${.CURDIR}/Makefile_upgrade.inc \
547             ${DESTDIR}/etc/upgrade/
548         cd ${.CURDIR}; ${IMAKE} -DWORLDINSTALL os-release
549         cd ${.CURDIR}; ${IMAKE} -DWORLDINSTALL initrd
550         sync
551         @echo "--------------------------------------------------------------"
552         @echo ">>> installworld target complete"
553         @echo "--------------------------------------------------------------"
554
555 os-release:
556         @echo "NAME=DragonFly" > ${DESTDIR}/etc/os-release
557         @echo "VERSION=${OSREL}-SYNTH" >> ${DESTDIR}/etc/os-release
558         @echo "VERSION_ID=${OSREL}" >> ${DESTDIR}/etc/os-release
559         @echo "ID=dragonfly" >> ${DESTDIR}/etc/os-release
560         @echo "ANSI_COLOR=\"0;32\"" >> ${DESTDIR}/etc/os-release
561         @echo "PRETTY_NAME=\"DragonFlyBSD ${OSREL}-SYNTH\"" >> ${DESTDIR}/etc/os-release
562         @echo "CPE_NAME=\"cpe:/o:dragonflybsd:dragonfly:${OSREL}\"" >> ${DESTDIR}/etc/os-release
563         @echo "SUPPORT_URL=\"http://chat.efnet.org:9090/?nick=dflynick&channels=%23dragonflybsd&Login=Login\"" >> ${DESTDIR}/etc/os-release
564         @echo "HOME_URL=\"https://www.dragonflybsd.org/\"" >> ${DESTDIR}/etc/os-release
565         @echo "BUG_REPORT_URL=\"https://bugs.dragonflybsd.org/\"" >> ${DESTDIR}/etc/os-release
566         @echo "MACHINE_ARCH=${MACHINE_ARCH}" >> ${DESTDIR}/etc/os-release
567         @echo "MACHINE=${MACHINE}" >> ${DESTDIR}/etc/os-release
568         @echo "DFLYVERSION=${DFLYVERSION}" >> ${DESTDIR}/etc/os-release
569
570 installworld-force:
571         @echo "Doing a forced installworld.  This will install to a temporary directory,"
572         @echo "then copy the main binaries and libraries with a static cpdup to ${DESTDIR}/"
573         @echo "and finally will issue a normal installworld."
574         @echo
575         @echo "Starting in 5 seconds.  ^C to abort."
576         @echo
577         sleep 1
578         rm -rf /usr/obj/temp > /dev/null 2>&1 || chflags -R noschg /usr/obj/temp
579         rm -rf /usr/obj/temp
580         mkdir -p /usr/obj/temp/cpdup/bin
581         (cd ${.CURDIR}/bin/cpdup; \
582                 make clean && \
583                 make obj && \
584                 make clean && \
585                 make CFLAGS=-static all install DESTDIR=/usr/obj/temp/cpdup NOMAN=TRUE)
586         @echo "XXXXXXXXX Installing to temporary XXXXXXXXX"
587         @sleep 1
588         (cd ${.CURDIR}; ${MAKE} installworld DESTDIR=/usr/obj/temp > /dev/null 2>&1)
589         @echo "XXXXXXXXX Blasting binaries and libraries XXXXXXXXX"
590         @sleep 1
591         /usr/obj/temp/cpdup/bin/cpdup -i0 /usr/obj/temp/bin /bin
592         /usr/obj/temp/cpdup/bin/cpdup -i0 /usr/obj/temp/sbin /sbin
593         /usr/obj/temp/cpdup/bin/cpdup -i0 /usr/obj/temp/lib /lib
594         /usr/obj/temp/cpdup/bin/cpdup -i0 /usr/obj/temp/usr/bin /usr/bin
595         /usr/obj/temp/cpdup/bin/cpdup -i0 /usr/obj/temp/usr/sbin /usr/sbin
596         /usr/obj/temp/cpdup/bin/cpdup -i0 /usr/obj/temp/usr/lib /usr/lib
597         /usr/obj/temp/cpdup/bin/cpdup -i0 /usr/obj/temp/libexec /libexec
598         /usr/obj/temp/cpdup/bin/cpdup -i0 /usr/obj/temp/usr/libexec /usr/libexec
599         @echo "XXXXXXXXX Doing final installworld XXXXXXXX"
600         sleep 5
601         (cd ${.CURDIR}; ${MAKE} installworld OVERRIDE_CHECKS=TRUE)
602         (cd ${.CURDIR}; ${MAKE} upgrade OVERRIDE_CHECKS=TRUE)
603         (cd ${.CURDIR}; ${MAKE} initrd)
604
605 # reinstall
606 #
607 # If you have a build server, you can NFS mount the source and obj directories
608 # and do a 'make reinstall' on the *client* to install new binaries from the
609 # most recent server build.
610 #
611 reinstall:
612         @echo "--------------------------------------------------------------"
613         @echo ">>> Making hierarchy"
614         @echo "--------------------------------------------------------------"
615         cd ${.CURDIR}; make -f Makefile.inc1 hierarchy
616         @echo
617         @echo "--------------------------------------------------------------"
618         @echo ">>> Installing everything"
619         @echo "--------------------------------------------------------------"
620         cd ${.CURDIR}; make -f Makefile.inc1 install
621
622 # initrd
623 #
624 # Install the rescue tools and the initrd image built by 'buildworld'.
625 #
626 initrd: .PHONY
627         (cd ${.CURDIR}/initrd; ${IMAKEENV} make install)
628
629
630 # buildkernel, nativekernel, quickkernel, realquickkernel, and installkernel
631 #
632 # Which kernels to build and/or install is specified by setting
633 # KERNCONF. If not defined an X86_64_GENERIC kernel is built/installed.
634 # Only the existing (depending TARGET) config files are used
635 # for building kernels and only the first of these is designated
636 # as the one being installed.
637 #
638 # You can specify INSTALLSTRIPPED=1 if you wish the installed
639 # kernel and modules to be stripped of its debug info (required
640 # symbols are left intact).  You can specify INSTALLSTRIPPEDMODULES
641 # if you only want to strip the modules of their debug info.  These
642 # only apply if you have DEBUG=-g in your kernel config or make line.
643 #
644 # Note that we have to use TARGET instead of TARGET_ARCH when
645 # we're in kernel-land. Since only TARGET_ARCH is (expected) to
646 # be set to cross-build, we have to make sure TARGET is set
647 # properly.
648
649 .if !defined(KERNCONF) && defined(KERNEL)
650 KERNCONF=       ${KERNEL}
651 KERNWARN=       yes
652 .else
653 # XXX makeshift fix to build the right kernel for the (target) architecture
654 # We should configure this in the platform files somehow
655 .if ${TARGET_ARCH} == "x86_64"
656 KERNCONF?=      X86_64_GENERIC
657 .endif
658 .endif
659 INSTKERNNAME?=  kernel
660
661 KRNLSRCDIR=     ${.CURDIR}/sys
662 KRNLCONFDIR=    ${KRNLSRCDIR}/config
663 KRNLOBJDIR=     ${OBJTREE}${KRNLSRCDIR}
664 KERNCONFDIR?=   ${KRNLCONFDIR}
665
666 BUILDKERNELS=
667 INSTALLKERNEL=
668 .for _kernel in ${KERNCONF}
669 .if exists(${KERNCONFDIR}/${_kernel})
670 BUILDKERNELS+=  ${_kernel}
671 .if empty(INSTALLKERNEL)
672 INSTALLKERNEL= ${_kernel}
673 .endif
674 .endif
675 .endfor
676
677 # kernel version numbers survive rm -rf
678 #
679 .for _kernel in ${BUILDKERNELS}
680 .if exists(${KRNLOBJDIR}/${_kernel}/version)
681 KERNEL_VERSION_${_kernel} != cat ${KRNLOBJDIR}/${_kernel}/version
682 .endif
683 .endfor
684
685 # buildkernel
686 #
687 # Builds all kernels defined by BUILDKERNELS.
688 #
689 bk_tools:
690         @if [ ! -f ${WORLDDEST}/.libraries_done ]; then \
691             echo "You must buildworld before buildkernel.  If you wish"; \
692             echo "to build a kernel using native tools, config it manually"; \
693             echo "or use the nativekernel target if you are in a rush"; \
694             /usr/bin/false; \
695         fi
696
697 maybe_bk_tools:
698 .for _kernel in ${BUILDKERNELS}
699         @if [ ! -f ${KRNLOBJDIR}/${_kernel}/.nativekernel_run ]; then \
700             if [ ! -f ${WORLDDEST}/.libraries_done ]; then \
701                 echo "The kernel was build using buildworld tools which no" ; \
702                 echo "longer appear to exist, (real)quickkernel failed!" ; \
703                 /usr/bin/false; \
704             fi; \
705         fi
706 .endfor
707
708 bk_build_list:
709 .if empty(BUILDKERNELS)
710         @echo ">>> ERROR: Missing kernel configuration file(s)."
711         @echo ">>> ${KERNCONF} not found in ${KERNCONFDIR}."
712         @false
713 .endif
714
715 bk_kernwarn:
716 .if defined(KERNWARN)
717         @echo "--------------------------------------------------------------"
718         @echo ">>> WARNING: KERNEL= setting should be changed to KERNCONF="
719         @echo "--------------------------------------------------------------"
720         @sleep 3
721 .endif
722         @echo
723
724 # The buildkernel target rebuilds the specified kernels from scratch
725 # using the crossbuild tools generated by the last buildworld.  It is
726 # the safest (but also the most time consuming) way to build a new kernel.
727 #
728 buildkernel:    bk_tools bk_build_list bk_kernwarn
729 .for _kernel in ${BUILDKERNELS}
730         @echo "--------------------------------------------------------------"
731         @echo ">>> Kernel build for ${_kernel} started on `LC_ALL=C date`"
732         @echo "--------------------------------------------------------------"
733         @echo "===> ${_kernel}"
734 .if !defined(NOCLEAN) && !defined(NO_KERNELCLEAN)
735         rm -rf ${KRNLOBJDIR}/${_kernel}
736 .else
737         @if [ -f ${KRNLOBJDIR}/${_kernel}/.nativekernel_run ]; then \
738                 echo "YOU ARE REBUILDING WITH BUILDKERNEL, REMOVING OLD NATIVEKERNEL BUILD"; \
739                 rm -rf ${KRNLOBJDIR}/${_kernel}; fi
740 .endif
741         mkdir -p ${KRNLOBJDIR}
742 .if !defined(NO_KERNELCONFIG)
743         cd ${KRNLCONFDIR}; \
744                 PATH=${STRICTTMPPATH} \
745                     config ${CONFIGARGS} -d ${KRNLOBJDIR}/${_kernel} \
746                         ${KERNCONFDIR}/${_kernel}
747 .endif
748 .if !defined(NOCLEAN) && !defined(NO_KERNELCLEAN) && defined(KERNEL_VERSION_${_kernel})
749         echo ${KERNEL_VERSION_${_kernel}} > ${KRNLOBJDIR}/${_kernel}/version
750 .endif
751         touch ${KRNLOBJDIR}/${_kernel}/.buildkernel_run
752 .if !defined(NO_KERNELDEPEND)
753         cd ${KRNLOBJDIR}/${_kernel}; \
754             ${KMAKEENV} make KERNEL=${INSTKERNNAME} depend
755 .endif
756         cd ${KRNLOBJDIR}/${_kernel}; \
757             ${KMAKEENV} make KERNEL=${INSTKERNNAME} all
758         @echo "--------------------------------------------------------------"
759         @echo ">>> Kernel build for ${_kernel} completed on `LC_ALL=C date`"
760         @echo "--------------------------------------------------------------"
761 .endfor
762
763 # The nativekernel target rebuilds the specified kernels from scratch
764 # using the system's standard compiler rather than using the crossbuild
765 # tools generated by the last buildworld.  This is fairly safe if your
766 # system is reasonable up-to-date.
767 #
768 nativekernel:   bk_build_list bk_kernwarn
769 .for _kernel in ${BUILDKERNELS}
770         @echo "--------------------------------------------------------------"
771         @echo ">>> Kernel build for ${_kernel} started on `LC_ALL=C date`"
772         @echo "--------------------------------------------------------------"
773         @echo "===> ${_kernel}"
774 .if !defined(NOCLEAN) && !defined(NO_KERNELCLEAN)
775         rm -rf ${KRNLOBJDIR}/${_kernel}
776 .else
777         @if [ -f ${KRNLOBJDIR}/${_kernel}/.buildkernel_run ]; then \
778                 echo "YOU ARE REBUILDING WITH NATIVEKERNEL, REMOVING OLD BUILDKERNEL BUILD"; \
779                 rm -rf ${KRNLOBJDIR}/${_kernel}; fi
780 .endif
781         mkdir -p ${KRNLOBJDIR}
782 .if !defined(NO_KERNELCONFIG)
783         cd ${KRNLCONFDIR}; \
784                     config ${CONFIGARGS} -d ${KRNLOBJDIR}/${_kernel} \
785                         ${KERNCONFDIR}/${_kernel}
786 .endif
787 .if !defined(NOCLEAN) && !defined(NO_KERNELCLEAN) && defined(KERNEL_VERSION_${_kernel})
788         echo ${KERNEL_VERSION_${_kernel}} > ${KRNLOBJDIR}/${_kernel}/version
789 .endif
790         touch ${KRNLOBJDIR}/${_kernel}/.nativekernel_run
791 .if !defined(NO_KERNELDEPEND)
792         cd ${KRNLOBJDIR}/${_kernel}; \
793             make KERNEL=${INSTKERNNAME} depend
794 .endif
795         cd ${KRNLOBJDIR}/${_kernel}; \
796             make KERNEL=${INSTKERNNAME} all
797         @echo "--------------------------------------------------------------"
798         @echo ">>> Kernel build for ${_kernel} completed on `LC_ALL=C date`"
799         @echo "--------------------------------------------------------------"
800 .endfor
801
802 # The (real)quickkernel target rebuilds the specified kernels as quickly
803 # as possible.  It will use the native tools or the buildworld cross tools
804 # based on whether the kernel was originally generated via buildkernel or
805 # nativekernel.  Config is rerun but the object hierarchy is not rebuilt.
806 # realquickkernel skips the depend step (analogous to realquickworld).
807 #
808 quickkernel realquickkernel:    maybe_bk_tools bk_build_list bk_kernwarn
809 .for _kernel in ${BUILDKERNELS}
810         @echo "--------------------------------------------------------------"
811         @echo ">>> Kernel build for ${_kernel} started on `LC_ALL=C date`"
812         @echo "--------------------------------------------------------------"
813         @echo "===> ${_kernel}"
814 .if exists(${KRNLOBJDIR}/${_kernel}/.buildkernel_run)
815 .if !defined(NO_KERNELCONFIG)
816         cd ${KRNLCONFDIR}; \
817                 PATH=${STRICTTMPPATH} \
818                     config ${CONFIGARGS} -d ${KRNLOBJDIR}/${_kernel} \
819                         ${KERNCONFDIR}/${_kernel}
820 .endif
821 .if !defined(NO_KERNELDEPEND) && !make(realquickkernel)
822         cd ${KRNLOBJDIR}/${_kernel}; \
823             ${KMAKEENV} make KERNEL=${INSTKERNNAME} depend
824 .endif
825         cd ${KRNLOBJDIR}/${_kernel}; \
826             ${KMAKEENV} make KERNEL=${INSTKERNNAME} all
827 .else
828 .if !defined(NO_KERNELCONFIG)
829         cd ${KRNLCONFDIR}; \
830             config ${CONFIGARGS} -d ${KRNLOBJDIR}/${_kernel} \
831                 ${KERNCONFDIR}/${_kernel}
832 .endif
833 .if !defined(NO_KERNELDEPEND) && !make(realquickkernel)
834         cd ${KRNLOBJDIR}/${_kernel}; \
835             make KERNEL=${INSTKERNNAME} depend
836 .endif
837         cd ${KRNLOBJDIR}/${_kernel}; \
838             make KERNEL=${INSTKERNNAME} all
839 .endif
840         @echo "--------------------------------------------------------------"
841         @echo ">>> Kernel build for ${_kernel} completed on `LC_ALL=C date`"
842         @echo "--------------------------------------------------------------"
843 .endfor
844
845
846 # installkernel
847 #
848 # Install the kernel defined by INSTALLKERNEL
849 #
850 installkernel reinstallkernel:
851         @echo "--------------------------------------------------------------"
852         @echo ">>> Kernel install for ${INSTALLKERNEL} started on `LC_ALL=C date`"
853         @echo "--------------------------------------------------------------"
854 .if exists(${KRNLOBJDIR}/${INSTALLKERNEL}/.buildkernel_run)
855         cd ${KRNLOBJDIR}/${INSTALLKERNEL}; \
856             ${IMAKEENV} make KERNEL=${INSTKERNNAME} ${.TARGET:S/kernel$//}
857 .else
858         cd ${KRNLOBJDIR}/${INSTALLKERNEL}; \
859             make KERNEL=${INSTKERNNAME} ${.TARGET:S/kernel$//}
860 .endif
861         @echo "--------------------------------------------------------------"
862         @echo ">>> Kernel install for ${INSTALLKERNEL} completed on `LC_ALL=C date`"
863         @echo "--------------------------------------------------------------"
864
865
866 # ------------------------------------------------------------------------
867 #
868 # From here onwards are utility targets used by the 'make world' and
869 # related targets.  If your 'world' breaks, you may like to try to fix
870 # the problem and manually run the following targets to attempt to
871 # complete the build.  Beware, this is *not* guaranteed to work, you
872 # need to have a pretty good grip on the current state of the system
873 # to attempt to manually finish it.  If in doubt, 'make world' again.
874 #
875
876 # bootstrap-tools: Build all tools required to build all tools.  Note that
877 # order is important in a number of cases and also note that the bootstrap
878 # and build tools stages have access to earlier binaries they themselves
879 # had generated.
880 #
881 # patch:        older patch's do not have -i.  This program must be built
882 #               first so other bootstrap tools that need to apply patches
883 #               can use it.
884 # [x]install:   dependancies on various new install features
885 # rpcgen:       old rpcgen used a hardwired cpp path, newer OBJFORMAT_PATH
886 #               envs are not compatible with older objformat binaries.
887 #
888
889 # BSTRAPDIRS1 - must be built in strict order, no parallelism
890 #
891 # order is very important. yacc before m4 before flex.  flex exec's m4,
892 # m4's parser file needs the latest byacc (insanity!).
893 #
894 BSTRAPDIRS1= \
895         usr.bin/patch \
896         bin/chmod bin/cp bin/cpdup bin/dd bin/mkdir bin/rm bin/echo \
897         bin/test bin/cat bin/ln bin/mv bin/expr bin/sh \
898         bin/hostname bin/kill \
899         usr.bin/yacc usr.bin/m4 usr.bin/localedef \
900         usr.bin/uudecode usr.bin/xinstall \
901         usr.bin/rpcgen usr.bin/bmake usr.bin/awk usr.bin/stat \
902         usr.bin/find usr.bin/flex
903
904 # BSTRAPDIRS2 - may built in parallel
905 #
906 BSTRAPDIRS2= \
907         usr.bin/sed usr.bin/uname usr.bin/touch \
908         usr.bin/mkdep usr.bin/mktemp usr.bin/lorder usr.bin/file2c \
909         usr.bin/tsort usr.bin/tr usr.bin/join usr.bin/wc usr.bin/basename \
910         usr.bin/gencat usr.bin/chflags \
911         usr.bin/uuencode usr.bin/cap_mkdb usr.bin/true usr.bin/false \
912         usr.bin/cmp usr.bin/xargs usr.bin/id usr.bin/env usr.bin/dirname \
913         usr.bin/tail usr.bin/unifdef \
914         usr.sbin/chown usr.sbin/mtree usr.sbin/config \
915         usr.sbin/zic usr.sbin/pwd_mkdb \
916         gnu/usr.bin/grep usr.bin/sort usr.bin/gzip \
917         usr.bin/mkcsmapper usr.bin/mkesdb usr.bin/crunch
918
919 bootstrap-tools: bootstrap-tools-before bootstrap-tools-targets1 bootstrap-tools-targets2
920         touch ${BTOOLSDEST}/.bootstrap_done
921
922 bootstrap-tools-before:
923         ${LN} -fs /bin/date ${BTOOLSDEST}/bin/date
924
925 bootstrap-tools-targets1: ${BSTRAPDIRS1:S/^/bstrap-/}
926
927 bootstrap-tools-targets2: ${BSTRAPDIRS2:S/^/bstrap-/}
928
929 .ORDER: bootstrap-tools-before bootstrap-tools-targets1 bootstrap-tools-targets2
930
931 .ORDER: ${BSTRAPDIRS1:S/^/bstrap-/}
932
933 .for _tool in ${BSTRAPDIRS1} ${BSTRAPDIRS2}
934 bstrap-${_tool}!
935         ${ECHODIR} "===> ${_tool} (bootstrap-tools)"; \
936                 cd ${.CURDIR}/${_tool}; \
937                 make DIRPRFX=${_tool}/ obj && \
938                 make DIRPRFX=${_tool}/ depend && \
939                 make DIRPRFX=${_tool}/ all && \
940                 make DIRPRFX=${_tool}/ DESTDIR=${BTOOLSDEST} install
941 .endfor
942
943 # build-tools: Build special purpose build tools.
944 #
945 # XXX we may be able to remove or consolidate this into bootstrap-tools
946 # now that we have the native helper (.nx/.no) infrastructure.
947 #
948 # XXX we should separate this into new Makefile.inc2.
949 # Just to prepare for reduction of ORDER: that slows down parallel crossworld.
950
951 # Make sure Makefile.inc1 logic is intact.
952 .if !defined(WORLD_ALTCOMPILER)
953 .warning undefined WORLD_ALTCOMPILER
954 .endif
955
956 # gcc80 is now the default compiler.  See sys.mk for WORLD_ALTCOMPILER default
957 # and this file for WORLD_CCVER.
958 #
959 _gcc47_cross= gnu/usr.bin/cc47
960 _gcc80_cross= gnu/usr.bin/cc80
961 _gcc_common_cross= lib/libz gnu/usr.bin/gmp gnu/usr.bin/mpfr gnu/usr.bin/mpc
962
963 .if !defined(NO_ALTCOMPILER)
964 . if defined(WORLD_ALTCOMPILER) && (${WORLD_ALTCOMPILER} == "all" || ${WORLD_ALTCOMPILER:Mgcc47})
965 _altcompiler_cross+= ${_gcc47_cross}
966 . endif
967 .endif
968
969 _basecompiler_cross= ${_gcc80_cross}
970
971 _custom_cross= libexec/customcc
972 _binutils= gnu/usr.bin/${WORLD_BINUTILSVER}
973
974 build-tools: build-tools-targets
975         touch ${BTOOLSDEST}/.build_done
976
977 build-tools-targets: ${BTOOLSDIRS:S/^/btools-/}
978
979 #
980 # cross-tools: Build cross-building tools
981 #
982
983 CTOOLSDIRS= usr.bin/objformat
984
985 CTOOLSDIRS+=    ${_binutils} \
986                 ${_gcc_common_cross} \
987                 ${_altcompiler_cross} \
988                 ${_basecompiler_cross} ${_custom_cross}
989
990 cross-tools: cross-tools-targets
991         touch ${CTOOLSDEST}/.cross_done
992
993 cross-tools-targets: ${CTOOLSDIRS:S/^/ctools-/}
994
995 .for _tool in ${CTOOLSDIRS}
996 ctools-${_tool}!
997         ${ECHODIR} "===> ${_tool} (cross-tools)"; \
998                 cd ${.CURDIR}/${_tool}; \
999                 make DIRPRFX=${_tool}/ obj && \
1000                 make DIRPRFX=${_tool}/ depend && \
1001                 make DIRPRFX=${_tool}/ all && \
1002                 make DIRPRFX=${_tool}/ DESTDIR=${CTOOLSDEST} install
1003 .endfor
1004
1005 #
1006 # hierarchy - ensure that all the needed directories are present
1007 #
1008 hierarchy:
1009         cd ${.CURDIR}/etc;              make distrib-dirs
1010
1011 #
1012 # libraries - build all libraries, and install them under ${DESTDIR}.
1013 #
1014 # The list of libraries with dependents (${_prebuild_libs}) and their
1015 # interdependencies (__L) are built automatically by the
1016 # ${.CURDIR}/tools/make_libdeps.sh script.
1017 #
1018 # .makeenv does not work when bootstrapping from 4.x, so we must be sure
1019 # to specify the correct CCVER or 'cc' will not exec the correct compiler.
1020 #
1021 libraries:
1022         cd ${.CURDIR}; \
1023             HOST_CCVER=${HOST_CCVER} CCVER=gcc80 \
1024                 make -f Makefile.inc1 _startup_libs80 -DSYSBUILD -DLIBGCC_ONLY;
1025 .if !defined(NO_ALTCOMPILER)
1026 . if defined(WORLD_ALTCOMPILER) && (${WORLD_ALTCOMPILER} == "all" || ${WORLD_ALTCOMPILER:Mgcc47})
1027         cd ${.CURDIR}; \
1028             HOST_CCVER=${HOST_CCVER} CCVER=gcc47 \
1029                 make -f Makefile.inc1 _startup_libs47 -DSYSBUILD -DLIBGCC_ONLY;
1030 . endif
1031 .endif
1032         cd ${.CURDIR}; \
1033             make -f Makefile.inc1 _startup_libs -DSYSBUILD && \
1034             make -f Makefile.inc1 _prebuild_libs -DSYSBUILD && \
1035             make -f Makefile.inc1 _generic_libs -DSYSBUILD && \
1036             touch ${WORLDDEST}/.libraries_done
1037
1038 # These dependencies are not automatically generated:
1039 #
1040 # gnu/lib/${CCVER}/libgcc and gnu/lib/${CCVER}/csu must be built before all
1041 # shared libraries for ELF.  The target for _startup_libsXX is
1042 # specifically built using gccXX.
1043 #
1044 _startup_libs47=        gnu/usr.bin/cc47/cc_prep \
1045                         gnu/usr.bin/cc47/cc_tools \
1046                         gnu/lib/gcc47/csu \
1047                         gnu/lib/gcc47/libgcc \
1048                         gnu/lib/gcc47/libgcc_eh \
1049                         gnu/lib/gcc47/libgcc_pic
1050
1051 _startup_libs80=        gnu/usr.bin/cc80/cc_prep \
1052                         gnu/usr.bin/cc80/cc_tools \
1053                         gnu/lib/gcc80/csu \
1054                         gnu/lib/gcc80/libgcc \
1055                         gnu/lib/gcc80/libgcc_eh \
1056                         gnu/lib/gcc80/libgcc_pic
1057
1058 .if !defined(NO_ALTCOMPILER)
1059 . if defined(WORLD_ALTCOMPILER) && (${WORLD_ALTCOMPILER} == "all" || ${WORLD_ALTCOMPILER:Mgcc47})
1060 _startup_libs_alt+=     _startup_libs47
1061 . endif
1062 .endif
1063
1064 _startup_libs_base=     _startup_libs80
1065
1066 _startup_libs=          lib/csu lib/libc lib/libc_rtld
1067 lib/libc__L: lib/csu__L
1068
1069 _prebuild_libs=         lib/libbz2 lib/liblzma lib/libz
1070 _prebuild_libs+=        lib/libutil
1071
1072 _prebuild_libs+=        lib/libelf
1073 _prebuild_libs+=        lib/libpcap
1074
1075 _generic_libs=  gnu/lib
1076
1077 _prebuild_libs+= lib/libcrypt lib/libncurses/libncurses
1078
1079 _generic_libs+= lib
1080
1081 _prebuild_libs+=        lib/librecrypto lib/libressl
1082 lib/libressl__L: lib/librecrypto__L
1083
1084 _prebuild_libs+= lib/libsbuf lib/libm \
1085                 lib/libpam/libpam lib/libypclnt lib/lib${THREAD_LIB} \
1086                 lib/libpthread lib/libprop
1087
1088 _generic_libs+= usr.bin/flex/lib
1089
1090 .for _alib in ${_startup_libs_alt} ${_startup_libs_base}
1091 __startup_alibs+= ${${_alib}}
1092 .endfor
1093
1094 .for _lib in ${__startup_alibs} \
1095                 ${_startup_libs} ${_prebuild_libs} ${_generic_libs}
1096 ${_lib}__L: .PHONY
1097 .if exists(${.CURDIR}/${_lib})
1098         @${ECHODIR} "===> ${_lib}"; \
1099                 cd ${.CURDIR}/${_lib}; \
1100                 echo "STEP DEP ${_lib}" && \
1101                 make DIRPRFX=${_lib}/ depend && \
1102                 echo "STEP ALL ${_lib}" && \
1103                 make DIRPRFX=${_lib}/ all && \
1104                 echo "STEP INSTALL ${_lib}" && \
1105                 make DIRPRFX=${_lib}/ install && \
1106                 echo "STEP DONE ${_lib}";
1107 .else
1108 .warning missing ${.CURDIR}/${_lib} directory.
1109 .endif
1110 .endfor
1111
1112 _startup_libs: ${_startup_libs:S/$/__L/}
1113 .for _alib in ${_startup_libs_alt} ${_startup_libs_base}
1114 ${_alib}: ${${_alib}:C/$/__L/}
1115 .endfor
1116 _prebuild_libs: ${_prebuild_libs:S/$/__L/}
1117 _generic_libs: ${_generic_libs:S/$/__L/}
1118
1119 # library targets must be ordered because there are inter-library
1120 # races (e.g. generation of tconfig.h)
1121 #
1122 .for _alib in ${_startup_libs_base} ${_startup_libs_alt}
1123 .ORDER: ${${_alib}:C/$/__L/}
1124 .endfor
1125
1126 # uncomment if there are missing dependencies
1127 .if 0
1128 .ORDER: ${_prebuild_libs:S/$/__L/}
1129 # we can disable this one, no lib/* depend on libstdc++
1130 .ORDER: ${_generic_libs:S/$/__L/}
1131 .endif
1132
1133 .for __target in clean cleandepend cleandir obj depend includes
1134 .for entry in ${SUBDIR}
1135 ${entry}.${__target}__D: .PHONY
1136         @if test -d ${.CURDIR}/${entry}.${MACHINE_ARCH}; then \
1137                 ${ECHODIR} "===> ${DIRPRFX}${entry}.${MACHINE_ARCH}"; \
1138                 edir=${entry}.${MACHINE_ARCH}; \
1139                 cd ${.CURDIR}/$${edir}; \
1140         else \
1141                 ${ECHODIR} "===> ${DIRPRFX}${entry}"; \
1142                 edir=${entry}; \
1143                 cd ${.CURDIR}/$${edir}; \
1144         fi; \
1145         make ${__target} DIRPRFX=${DIRPRFX}$${edir}/
1146 .endfor
1147 par-${__target}: ${SUBDIR:C/$/.${__target}__D/}
1148 .ORDER: ${SUBDIR:C/$/.${__target}__D/}
1149 .endfor
1150 .ORDER: par-clean par-cleandepend par-cleandir par-obj par-depend par-includes
1151
1152 # The wmake target is used by /usr/bin/wmake to run make in a
1153 # world build environment.
1154 #
1155 wmake:
1156         @echo '${WMAKEENV} make ${WMAKE_ARGS} -DSYSBUILD'
1157
1158 wmakeenv:
1159         @echo '${WMAKEENV} /bin/sh'
1160
1161 bmake:
1162         @echo '${BMAKEENV} make ${BMAKE_ARGS} -DSYSBUILD'
1163
1164 bmakeenv:
1165         @echo '${BMAKEENV} /bin/sh'
1166
1167 tmake:
1168         @echo '${TMAKEENV} make ${TMAKE_ARGS} -DSYSBUILD'
1169
1170 tmakeenv:
1171         @echo '${TMAKEENV} /bin/sh'
1172
1173 xmake:
1174         @echo '${XMAKEENV} make ${XMAKE_ARGS} -DSYSBUILD'
1175
1176 xmakeenv:
1177         @echo '${XMAKEENV} /bin/sh'
1178
1179 backupworld: backup-clean
1180         @mkdir -p ${WORLD_BACKUP}
1181 .if (exists(${DESTDIR}/sbin) && exists(${DESTDIR}/bin) && \
1182      exists(${DESTDIR}/usr/sbin) && exists(${DESTDIR}/usr/bin) && \
1183      exists(${DESTDIR}/usr/lib) && exists(${DESTDIR}/usr/libexec))
1184         tar -czf ${WORLD_BACKUP}/binaries.tar.gz -C ${DESTDIR}/ \
1185                 --options gzip:compression-level=1 \
1186                 sbin bin usr/sbin usr/bin usr/lib usr/libexec
1187 .endif
1188
1189 backupworld-auto:
1190 .if !defined(NO_BACKUP)
1191         rm -f ${AUTO_BACKUP}/binaries.tar.gz
1192         @mkdir -p ${AUTO_BACKUP}
1193 .if (exists(${DESTDIR}/sbin) && exists(${DESTDIR}/bin) && \
1194      exists(${DESTDIR}/usr/sbin) && exists(${DESTDIR}/usr/bin) && \
1195      exists(${DESTDIR}/usr/lib) && exists(${DESTDIR}/usr/libexec))
1196         /usr/bin/tar -czf ${AUTO_BACKUP}/binaries.tar.gz -C ${DESTDIR}/ \
1197                 --options gzip:compression-level=1 \
1198                 sbin bin usr/sbin usr/bin usr/lib usr/libexec
1199 .endif
1200 .endif
1201
1202 backup-auto-clean:
1203         rm -f ${AUTO_BACKUP}/binaries.tar.gz
1204
1205 backup-clean:
1206         rm -f ${WORLD_BACKUP}/binaries.tar.gz
1207
1208 restoreworld:
1209 .if !exists(${WORLD_BACKUP}/binaries.tar.gz)
1210         @echo "There does not seem to be a valid archive present."
1211 .else
1212         @echo "Restoring system binaries from manual backup archive..."
1213         @chflags -R noschg ${DESTDIR}/sbin ${DESTDIR}/bin \
1214                 ${DESTDIR}/usr/sbin ${DESTDIR}/usr/bin \
1215                 ${DESTDIR}/usr/lib ${DESTDIR}/usr/libexec
1216         tar -xzf ${WORLD_BACKUP}/binaries.tar.gz -C ${DESTDIR}/
1217 .endif
1218
1219 restoreworld-auto:
1220 .if !exists(${AUTO_BACKUP}/binaries.tar.gz)
1221         @echo "There does not seem to be a valid archive present."
1222 .else
1223         @echo "Restoring system binaries from auto-backup archive..."
1224         @chflags -R noschg ${DESTDIR}/sbin ${DESTDIR}/bin \
1225                 ${DESTDIR}/usr/sbin ${DESTDIR}/usr/bin \
1226                 ${DESTDIR}/usr/lib ${DESTDIR}/usr/libexec
1227         tar -xzf ${AUTO_BACKUP}/binaries.tar.gz -C ${DESTDIR}/
1228 .endif
1229
1230 # Take advantage of bmake error response
1231 #
1232 MAKE_PRINT_VAR_ON_ERROR= \
1233         .CURDIR \
1234         .OBJDIR \
1235         .TARGETS \
1236         .ERROR_TARGET \
1237         .MAKE.LEVEL \
1238         .MAKE.MODE \
1239         PATH \
1240         LD_LIBRARY_PATH \
1241         MACHINE_ARCH \
1242         MACHINE \
1243         MAKEFILE \
1244         MAKESYSPATH \
1245         MAKEOBJDIRPREFIX \
1246         WORLD_ALTCOMPILER \
1247         DESTDIR \
1248         SHELL .SHELL
1249 .if ${.MAKE.LEVEL} > 0
1250 MAKE_PRINT_VAR_ON_ERROR+= .MAKE.MAKEFILES .PATH
1251 .endif
1252
1253 .include <bsd.subdir.mk>