iwm: Fix S:N reporting in ifconfig(8)
[dragonfly.git] / sys / dev / disk / mpt / mpilib / mpi_sas.h
1 /* $FreeBSD: head/sys/dev/mpt/mpilib/mpi_sas.h 233425 2012-03-24 16:23:21Z marius $ */
2 /*-
3  * Copyright (c) 2000-2010, LSI Logic Corporation and its contributors.
4  * All rights reserved.
5  *
6  * Redistribution and use in source and binary forms, with or without
7  * modification, are permitted provided that the following conditions are
8  * met:
9  * 1. Redistributions of source code must retain the above copyright
10  *    notice, this list of conditions and the following disclaimer.
11  * 2. Redistributions in binary form must reproduce at minimum a disclaimer
12  *    substantially similar to the "NO WARRANTY" disclaimer below
13  *    ("Disclaimer") and any redistribution must be conditioned upon including
14  *    a substantially similar Disclaimer requirement for further binary
15  *    redistribution.
16  * 3. Neither the name of the LSI Logic Corporation nor the names of its
17  *    contributors may be used to endorse or promote products derived from
18  *    this software without specific prior written permission.
19  *
20  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
21  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
22  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
23  * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
24  * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
25  * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
26  * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
27  * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
28  * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
29  * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF THE COPYRIGHT
30  * OWNER OR CONTRIBUTOR IS ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
31  *
32  *           Name:  mpi_sas.h
33  *          Title:  MPI Serial Attached SCSI structures and definitions
34  *  Creation Date:  August 19, 2004
35  *
36  *    mpi_sas.h Version:  01.05.05
37  *
38  *  Version History
39  *  ---------------
40  *
41  *  Date      Version   Description
42  *  --------  --------  ------------------------------------------------------
43  *  08-19-04  01.05.01  Original release.
44  *  08-30-05  01.05.02  Added DeviceInfo bit for SEP.
45  *                      Added PrimFlags and Primitive field to SAS IO Unit
46  *                      Control request, and added a new operation code.
47  *  03-27-06  01.05.03  Added Force Full Discovery, Transmit Port Select Signal,
48  *                      and Remove Device operations to SAS IO Unit Control.
49  *                      Added DevHandle field to SAS IO Unit Control request and
50  *                      reply.
51  *  10-11-06  01.05.04  Fixed the name of a define for Operation field of SAS IO
52  *                      Unit Control request.
53  *  01-15-08  01.05.05  Added support for MPI_SAS_OP_SET_IOC_PARAMETER,
54  *                      including adding IOCParameter and IOCParameter value
55  *                      fields to SAS IO Unit Control Request.
56  *                      Added MPI_SAS_DEVICE_INFO_PRODUCT_SPECIFIC define.
57  *  --------------------------------------------------------------------------
58  */
59
60 #ifndef MPI_SAS_H
61 #define MPI_SAS_H
62
63
64 /*
65  * Values for SASStatus.
66  */
67 #define MPI_SASSTATUS_SUCCESS                           (0x00)
68 #define MPI_SASSTATUS_UNKNOWN_ERROR                     (0x01)
69 #define MPI_SASSTATUS_INVALID_FRAME                     (0x02)
70 #define MPI_SASSTATUS_UTC_BAD_DEST                      (0x03)
71 #define MPI_SASSTATUS_UTC_BREAK_RECEIVED                (0x04)
72 #define MPI_SASSTATUS_UTC_CONNECT_RATE_NOT_SUPPORTED    (0x05)
73 #define MPI_SASSTATUS_UTC_PORT_LAYER_REQUEST            (0x06)
74 #define MPI_SASSTATUS_UTC_PROTOCOL_NOT_SUPPORTED        (0x07)
75 #define MPI_SASSTATUS_UTC_STP_RESOURCES_BUSY            (0x08)
76 #define MPI_SASSTATUS_UTC_WRONG_DESTINATION             (0x09)
77 #define MPI_SASSTATUS_SHORT_INFORMATION_UNIT            (0x0A)
78 #define MPI_SASSTATUS_LONG_INFORMATION_UNIT             (0x0B)
79 #define MPI_SASSTATUS_XFER_RDY_INCORRECT_WRITE_DATA     (0x0C)
80 #define MPI_SASSTATUS_XFER_RDY_REQUEST_OFFSET_ERROR     (0x0D)
81 #define MPI_SASSTATUS_XFER_RDY_NOT_EXPECTED             (0x0E)
82 #define MPI_SASSTATUS_DATA_INCORRECT_DATA_LENGTH        (0x0F)
83 #define MPI_SASSTATUS_DATA_TOO_MUCH_READ_DATA           (0x10)
84 #define MPI_SASSTATUS_DATA_OFFSET_ERROR                 (0x11)
85 #define MPI_SASSTATUS_SDSF_NAK_RECEIVED                 (0x12)
86 #define MPI_SASSTATUS_SDSF_CONNECTION_FAILED            (0x13)
87 #define MPI_SASSTATUS_INITIATOR_RESPONSE_TIMEOUT        (0x14)
88
89
90 /*
91  * Values for the SAS DeviceInfo field used in SAS Device Status Change Event
92  * data and SAS IO Unit Configuration pages.
93  */
94 #define MPI_SAS_DEVICE_INFO_PRODUCT_SPECIFIC    (0xF0000000)
95
96 #define MPI_SAS_DEVICE_INFO_SEP                 (0x00004000)
97 #define MPI_SAS_DEVICE_INFO_ATAPI_DEVICE        (0x00002000)
98 #define MPI_SAS_DEVICE_INFO_LSI_DEVICE          (0x00001000)
99 #define MPI_SAS_DEVICE_INFO_DIRECT_ATTACH       (0x00000800)
100 #define MPI_SAS_DEVICE_INFO_SSP_TARGET          (0x00000400)
101 #define MPI_SAS_DEVICE_INFO_STP_TARGET          (0x00000200)
102 #define MPI_SAS_DEVICE_INFO_SMP_TARGET          (0x00000100)
103 #define MPI_SAS_DEVICE_INFO_SATA_DEVICE         (0x00000080)
104 #define MPI_SAS_DEVICE_INFO_SSP_INITIATOR       (0x00000040)
105 #define MPI_SAS_DEVICE_INFO_STP_INITIATOR       (0x00000020)
106 #define MPI_SAS_DEVICE_INFO_SMP_INITIATOR       (0x00000010)
107 #define MPI_SAS_DEVICE_INFO_SATA_HOST           (0x00000008)
108
109 #define MPI_SAS_DEVICE_INFO_MASK_DEVICE_TYPE    (0x00000007)
110 #define MPI_SAS_DEVICE_INFO_NO_DEVICE           (0x00000000)
111 #define MPI_SAS_DEVICE_INFO_END_DEVICE          (0x00000001)
112 #define MPI_SAS_DEVICE_INFO_EDGE_EXPANDER       (0x00000002)
113 #define MPI_SAS_DEVICE_INFO_FANOUT_EXPANDER     (0x00000003)
114
115
116
117 /*****************************************************************************
118 *
119 *        S e r i a l    A t t a c h e d    S C S I     M e s s a g e s
120 *
121 *****************************************************************************/
122
123 /****************************************************************************/
124 /* Serial Management Protocol Passthrough Request                           */
125 /****************************************************************************/
126
127 typedef struct _MSG_SMP_PASSTHROUGH_REQUEST
128 {
129     U8                      PassthroughFlags;   /* 00h */
130     U8                      PhysicalPort;       /* 01h */
131     U8                      ChainOffset;        /* 02h */
132     U8                      Function;           /* 03h */
133     U16                     RequestDataLength;  /* 04h */
134     U8                      ConnectionRate;     /* 06h */
135     U8                      MsgFlags;           /* 07h */
136     U32                     MsgContext;         /* 08h */
137     U32                     Reserved1;          /* 0Ch */
138     U64                     SASAddress;         /* 10h */
139     U32                     Reserved2;          /* 18h */
140     U32                     Reserved3;          /* 1Ch */
141     SGE_SIMPLE_UNION        SGL;                /* 20h */
142 } MSG_SMP_PASSTHROUGH_REQUEST, MPI_POINTER PTR_MSG_SMP_PASSTHROUGH_REQUEST,
143   SmpPassthroughRequest_t, MPI_POINTER pSmpPassthroughRequest_t;
144
145 /* values for PassthroughFlags field */
146 #define MPI_SMP_PT_REQ_PT_FLAGS_IMMEDIATE       (0x80)
147
148 /* values for ConnectionRate field */
149 #define MPI_SMP_PT_REQ_CONNECT_RATE_NEGOTIATED  (0x00)
150 #define MPI_SMP_PT_REQ_CONNECT_RATE_1_5         (0x08)
151 #define MPI_SMP_PT_REQ_CONNECT_RATE_3_0         (0x09)
152
153
154 /* Serial Management Protocol Passthrough Reply */
155 typedef struct _MSG_SMP_PASSTHROUGH_REPLY
156 {
157     U8                      PassthroughFlags;   /* 00h */
158     U8                      PhysicalPort;       /* 01h */
159     U8                      MsgLength;          /* 02h */
160     U8                      Function;           /* 03h */
161     U16                     ResponseDataLength; /* 04h */
162     U8                      Reserved1;          /* 06h */
163     U8                      MsgFlags;           /* 07h */
164     U32                     MsgContext;         /* 08h */
165     U8                      Reserved2;          /* 0Ch */
166     U8                      SASStatus;          /* 0Dh */
167     U16                     IOCStatus;          /* 0Eh */
168     U32                     IOCLogInfo;         /* 10h */
169     U32                     Reserved3;          /* 14h */
170     U8                      ResponseData[4];    /* 18h */
171 } MSG_SMP_PASSTHROUGH_REPLY, MPI_POINTER PTR_MSG_SMP_PASSTHROUGH_REPLY,
172   SmpPassthroughReply_t, MPI_POINTER pSmpPassthroughReply_t;
173
174 #define MPI_SMP_PT_REPLY_PT_FLAGS_IMMEDIATE     (0x80)
175
176
177 /****************************************************************************/
178 /* SATA Passthrough Request                                                 */
179 /****************************************************************************/
180
181 typedef struct _MSG_SATA_PASSTHROUGH_REQUEST
182 {
183     U8                      TargetID;           /* 00h */
184     U8                      Bus;                /* 01h */
185     U8                      ChainOffset;        /* 02h */
186     U8                      Function;           /* 03h */
187     U16                     PassthroughFlags;   /* 04h */
188     U8                      ConnectionRate;     /* 06h */
189     U8                      MsgFlags;           /* 07h */
190     U32                     MsgContext;         /* 08h */
191     U32                     Reserved1;          /* 0Ch */
192     U32                     Reserved2;          /* 10h */
193     U32                     Reserved3;          /* 14h */
194     U32                     DataLength;         /* 18h */
195     U8                      CommandFIS[20];     /* 1Ch */
196     SGE_SIMPLE_UNION        SGL;                /* 30h */
197 } MSG_SATA_PASSTHROUGH_REQUEST, MPI_POINTER PTR_MSG_SATA_PASSTHROUGH_REQUEST,
198   SataPassthroughRequest_t, MPI_POINTER pSataPassthroughRequest_t;
199
200 /* values for PassthroughFlags field */
201 #define MPI_SATA_PT_REQ_PT_FLAGS_RESET_DEVICE   (0x0200)
202 #define MPI_SATA_PT_REQ_PT_FLAGS_EXECUTE_DIAG   (0x0100)
203 #define MPI_SATA_PT_REQ_PT_FLAGS_DMA_QUEUED     (0x0080)
204 #define MPI_SATA_PT_REQ_PT_FLAGS_PACKET_COMMAND (0x0040)
205 #define MPI_SATA_PT_REQ_PT_FLAGS_DMA            (0x0020)
206 #define MPI_SATA_PT_REQ_PT_FLAGS_PIO            (0x0010)
207 #define MPI_SATA_PT_REQ_PT_FLAGS_UNSPECIFIED_VU (0x0004)
208 #define MPI_SATA_PT_REQ_PT_FLAGS_WRITE          (0x0002)
209 #define MPI_SATA_PT_REQ_PT_FLAGS_READ           (0x0001)
210
211 /* values for ConnectionRate field */
212 #define MPI_SATA_PT_REQ_CONNECT_RATE_NEGOTIATED (0x00)
213 #define MPI_SATA_PT_REQ_CONNECT_RATE_1_5        (0x08)
214 #define MPI_SATA_PT_REQ_CONNECT_RATE_3_0        (0x09)
215
216
217 /* SATA Passthrough Reply */
218 typedef struct _MSG_SATA_PASSTHROUGH_REPLY
219 {
220     U8                      TargetID;           /* 00h */
221     U8                      Bus;                /* 01h */
222     U8                      MsgLength;          /* 02h */
223     U8                      Function;           /* 03h */
224     U16                     PassthroughFlags;   /* 04h */
225     U8                      Reserved1;          /* 06h */
226     U8                      MsgFlags;           /* 07h */
227     U32                     MsgContext;         /* 08h */
228     U8                      Reserved2;          /* 0Ch */
229     U8                      SASStatus;          /* 0Dh */
230     U16                     IOCStatus;          /* 0Eh */
231     U32                     IOCLogInfo;         /* 10h */
232     U8                      StatusFIS[20];      /* 14h */
233     U32                     StatusControlRegisters; /* 28h */
234     U32                     TransferCount;      /* 2Ch */
235 } MSG_SATA_PASSTHROUGH_REPLY, MPI_POINTER PTR_MSG_SATA_PASSTHROUGH_REPLY,
236   SataPassthroughReply_t, MPI_POINTER pSataPassthroughReply_t;
237
238
239
240
241 /****************************************************************************/
242 /* SAS IO Unit Control Request                                              */
243 /****************************************************************************/
244
245 typedef struct _MSG_SAS_IOUNIT_CONTROL_REQUEST
246 {
247     U8                      Operation;          /* 00h */
248     U8                      Reserved1;          /* 01h */
249     U8                      ChainOffset;        /* 02h */
250     U8                      Function;           /* 03h */
251     U16                     DevHandle;          /* 04h */
252     U8                      IOCParameter;       /* 06h */
253     U8                      MsgFlags;           /* 07h */
254     U32                     MsgContext;         /* 08h */
255     U8                      TargetID;           /* 0Ch */
256     U8                      Bus;                /* 0Dh */
257     U8                      PhyNum;             /* 0Eh */
258     U8                      PrimFlags;          /* 0Fh */
259     U32                     Primitive;          /* 10h */
260     U64                     SASAddress;         /* 14h */
261     U32                     IOCParameterValue;  /* 1Ch */
262 } MSG_SAS_IOUNIT_CONTROL_REQUEST, MPI_POINTER PTR_MSG_SAS_IOUNIT_CONTROL_REQUEST,
263   SasIoUnitControlRequest_t, MPI_POINTER pSasIoUnitControlRequest_t;
264
265 /* values for the Operation field */
266 #define MPI_SAS_OP_CLEAR_NOT_PRESENT            (0x01)
267 #define MPI_SAS_OP_CLEAR_ALL_PERSISTENT         (0x02)
268 #define MPI_SAS_OP_PHY_LINK_RESET               (0x06)
269 #define MPI_SAS_OP_PHY_HARD_RESET               (0x07)
270 #define MPI_SAS_OP_PHY_CLEAR_ERROR_LOG          (0x08)
271 #define MPI_SAS_OP_MAP_CURRENT                  (0x09)
272 #define MPI_SAS_OP_SEND_PRIMITIVE               (0x0A)
273 #define MPI_SAS_OP_FORCE_FULL_DISCOVERY         (0x0B)
274 #define MPI_SAS_OP_TRANSMIT_PORT_SELECT_SIGNAL  (0x0C)
275 #define MPI_SAS_OP_TRANSMIT_REMOVE_DEVICE       (0x0D)  /* obsolete name */
276 #define MPI_SAS_OP_REMOVE_DEVICE                (0x0D)
277 #define MPI_SAS_OP_SET_IOC_PARAMETER            (0x0E)
278 #define MPI_SAS_OP_PRODUCT_SPECIFIC_MIN         (0x80)
279
280 /* values for the PrimFlags field */
281 #define MPI_SAS_PRIMFLAGS_SINGLE                (0x08)
282 #define MPI_SAS_PRIMFLAGS_TRIPLE                (0x02)
283 #define MPI_SAS_PRIMFLAGS_REDUNDANT             (0x01)
284
285
286 /* SAS IO Unit Control Reply */
287 typedef struct _MSG_SAS_IOUNIT_CONTROL_REPLY
288 {
289     U8                      Operation;          /* 00h */
290     U8                      Reserved1;          /* 01h */
291     U8                      MsgLength;          /* 02h */
292     U8                      Function;           /* 03h */
293     U16                     DevHandle;          /* 04h */
294     U8                      IOCParameter;       /* 06h */
295     U8                      MsgFlags;           /* 07h */
296     U32                     MsgContext;         /* 08h */
297     U16                     Reserved4;          /* 0Ch */
298     U16                     IOCStatus;          /* 0Eh */
299     U32                     IOCLogInfo;         /* 10h */
300 } MSG_SAS_IOUNIT_CONTROL_REPLY, MPI_POINTER PTR_MSG_SAS_IOUNIT_CONTROL_REPLY,
301   SasIoUnitControlReply_t, MPI_POINTER pSasIoUnitControlReply_t;
302
303 #endif