2 # GENERIC -- Generic kernel configuration file for DragonFly/i386
4 # For more information on this file, please read the FreeBSD handbook section
5 # on Kernel Configuration Files:
7 # http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html
9 # An exhaustive list of options and more detailed explanations of the
10 # device lines is also present in the ./LINT configuration file. If you are
11 # in doubt as to the purpose or necessity of a line, check first in LINT.
13 # $FreeBSD: src/sys/i386/conf/GENERIC,v 1.246.2.54 2003/04/28 03:41:46 simokawa Exp $
14 # $DragonFly: src/sys/config/GENERIC,v 1.11 2004/04/05 13:44:40 eirikn Exp $
24 makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols
26 options MATH_EMULATE #Support for x87 emulation
27 options INET #InterNETworking
28 options INET6 #IPv6 communications protocols
29 options FFS #Berkeley Fast Filesystem
30 options FFS_ROOT #FFS usable as root device [keep this!]
31 options SOFTUPDATES #Enable FFS soft updates support
32 options UFS_DIRHASH #Improve performance on big directories
33 options MFS #Memory Filesystem
34 options MD_ROOT #MD is a potential root device
35 options NFS #Network Filesystem
36 options NFS_ROOT #NFS usable as root device, NFS required
37 options MSDOSFS #MSDOS Filesystem
38 options CD9660 #ISO 9660 Filesystem
39 options CD9660_ROOT #CD-ROM usable as root, CD9660 required
40 options PROCFS #Process filesystem
41 options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!]
42 options SCSI_DELAY=15000 #Delay (in ms) before probing SCSI
43 options UCONSOLE #Allow users to grab the console
44 options USERCONFIG #boot -c editor
45 options VISUAL_USERCONFIG #visual boot -c editor
46 options KTRACE #ktrace(1) support
47 options SYSVSHM #SYSV-style shared memory
48 options SYSVMSG #SYSV-style message queues
49 options SYSVSEM #SYSV-style semaphores
50 options P1003_1B #Posix P1003_1B real-time extensions
51 options _KPOSIX_PRIORITY_SCHEDULING
52 options ICMP_BANDLIM #Rate limit bad replies
53 options KBD_INSTALL_CDEV # install a CDEV entry in /dev
54 options AHC_REG_PRETTY_PRINT # Print register bitfields in debug
55 # output. Adds ~128k to driver.
56 options AHD_REG_PRETTY_PRINT # Print register bitfields in debug
57 # output. Adds ~215k to driver.
59 # To make an SMP kernel, the next two are needed
60 #options SMP # Symmetric MultiProcessor Kernel
61 #options APIC_IO # Symmetric (APIC) I/O
63 # Debugging for Development
66 options INVARIANT_SUPPORT
75 device fdc0 at isa? port IO_FD1 irq 6 drq 2
76 device fd0 at fdc0 drive 0
77 device fd1 at fdc0 drive 1
79 # If you have a Toshiba Libretto with its Y-E Data PCMCIA floppy,
80 # don't use the above line for fdc0 but the following one:
83 # ATA and ATAPI devices
84 device ata0 at isa? port IO_WD1 irq 14
85 device ata1 at isa? port IO_WD2 irq 15
87 device atadisk # ATA disk drives
88 device atapicd # ATAPI CDROM drives
89 device atapifd # ATAPI floppy drives
90 device atapist # ATAPI tape drives
91 device atapicam # Emulate ATAPI devices as SCSI via CAM
92 options ATA_STATIC_ID #Static device numbering
95 device ahb # EISA AHA1742 family
96 device ahc # AHA2940 and onboard AIC7xxx devices
97 device ahd # AHA39320/29320 and onboard AIC79xx devices
98 device amd # AMD 53C974 (Tekram DC-390(T))
99 device isp # Qlogic family
100 device mpt # LSI-Logic MPT/Fusion
101 device ncr # NCR/Symbios Logic
102 device sym # NCR/Symbios Logic (newer chipsets)
103 options SYM_SETUP_LP_PROBE_MAP=0x40
104 # Allow ncr to attach legacy NCR devices when
105 # both sym and ncr are configured
113 device ncv # NCR 53C500
114 device nsp # Workbit Ninja SCSI-3
115 device stg # TMC 18C30/18C50
118 device scbus # SCSI bus (required)
119 device da # Direct Access (disks)
120 device sa # Sequential Access (tape etc)
122 device pass # Passthrough device (direct SCSI access)
124 # RAID controllers interfaced to the SCSI subsystem
125 device asr # DPT SmartRAID V, VI and Adaptec SCSI RAID
126 device dpt # DPT Smartcache - See LINT for options!
127 device iir # Intel Integrated RAID
128 device mly # Mylex AcceleRAID/eXtremeRAID
129 device ciss # Compaq SmartRAID 5* series
132 device aac # Adaptec FSA RAID, Dell PERC2/PERC3
133 #device aacp # SCSI passthrough for aac (requires CAM)
134 device ida # Compaq Smart RAID
135 device amr # AMI MegaRAID
136 device mlx # Mylex DAC960 family
137 device twe # 3ware Escalade
138 device pst # Promise Supertrack
140 # atkbdc0 controls both the keyboard and the PS/2 mouse
141 device atkbdc0 at isa? port IO_KBD
142 device atkbd0 at atkbdc? irq 1 flags 0x1
143 device psm0 at atkbdc? irq 12
147 # splash screen/screen saver
150 # syscons is the default console driver, resembling an SCO console
151 device sc0 at isa? flags 0x100
153 # Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver
155 #options XSERVER # support for X server on a vt console
156 #options FAT_CURSOR # start with block cursor
157 # If you have a ThinkPAD, uncomment this along with the rest of the PCVT lines
158 #options PCVT_SCANSET=2 # IBM keyboards are non-std
160 device agp # support several AGP chipsets
162 # Floating point support - do not disable.
163 device npx0 at nexus? port IO_NPX irq 13
165 # Power management support (see LINT for more options)
166 device apm0 at nexus? disable flags 0x20 # Advanced Power Management
168 # PCCARD (PCMCIA) support
174 device sio0 at isa? port IO_COM1 flags 0x10 irq 4
175 device sio1 at isa? port IO_COM2 irq 3
176 device sio2 at isa? disable port IO_COM3 irq 5
177 device sio3 at isa? disable port IO_COM4 irq 9
180 device ppc0 at isa? irq 7
181 device ppbus # Parallel port bus (required)
183 device plip # TCP/IP over parallel
184 device ppi # Parallel port interface device
185 #device vpo # Requires scbus and da
189 device de # DEC/Intel DC21x4x (``Tulip'')
190 device em # Intel PRO/1000 adapter Gigabit Ethernet Card (``Wiseman'')
191 device txp # 3Com 3cR990 (``Typhoon'')
192 device vx # 3Com 3c590, 3c595 (``Vortex'')
194 # PCI Ethernet NICs that use the common MII bus controller code.
195 # NOTE: Be sure to keep the 'device miibus' line in order to use these NICs!
196 device miibus # MII bus support
197 device bfe # Broadcom BCM440x 10/100 Ethernet
198 device dc # DEC/Intel 21143 and various workalikes
199 device fxp # Intel EtherExpress PRO/100B (82557, 82558)
200 device pcn # AMD Am79C97x PCI 10/100 NICs
201 device rl # RealTek 8129/8139
202 device sf # Adaptec AIC-6915 (``Starfire'')
203 device sis # Silicon Integrated Systems SiS 900/SiS 7016
204 device ste # Sundance ST201 (D-Link DFE-550TX)
205 device tl # Texas Instruments ThunderLAN
206 device tx # SMC EtherPower II (83c170 ``EPIC'')
207 device vr # VIA Rhine, Rhine II
208 device wb # Winbond W89C840F
209 device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'')
210 device bge # Broadcom BCM570x (``Tigon III'')
213 # 'device ed' requires 'device miibus'
214 device ed0 at isa? disable port 0x280 irq 10 iomem 0xd8000
217 device fe0 at isa? disable port 0x300
220 # PRISM I IEEE 802.11b wireless NIC.
222 # WaveLAN/IEEE 802.11 wireless NICs. Note: the WaveLAN/IEEE really
223 # exists only as a PCMCIA device, so there is no ISA attachment needed
224 # and resources will always be dynamically assigned by the pccard code.
226 # Aironet 4500/4800 802.11 wireless NICs. Note: the declaration below will
227 # work for PCMCIA and PCI cards, as well as ISA cards set to ISA PnP
228 # mode (the factory default). If you set the switches on your ISA
229 # card for a manually chosen I/O address and IRQ, you must specify
230 # those parameters here.
232 # The probe order of these is presently determined by i386/isa/isa_compat.c.
233 device ie0 at isa? disable port 0x300 irq 10 iomem 0xd0000
234 #device le0 at isa? disable port 0x300 irq 5 iomem 0xd0000
235 device lnc0 at isa? disable port 0x280 irq 10 drq 0
236 device cs0 at isa? disable port 0x300
237 device sn0 at isa? disable port 0x300 irq 10
239 # Pseudo devices - the number indicates how many units to allocate.
240 pseudo-device loop # Network loopback
241 pseudo-device ether # Ethernet support
242 pseudo-device sl 1 # Kernel SLIP
243 pseudo-device ppp 1 # Kernel PPP
244 pseudo-device tun # Packet tunnel.
245 pseudo-device pty # Pseudo-ttys (telnet etc)
246 pseudo-device md # Memory "disks"
247 pseudo-device gif # IPv6 and IPv4 tunneling
248 pseudo-device faith 1 # IPv6-to-IPv4 relaying (translation)
250 # The `bpf' pseudo-device enables the Berkeley Packet Filter.
251 # Be aware of the administrative consequences of enabling this!
252 pseudo-device bpf #Berkeley packet filter
253 #options PFIL_HOOKS #Packetfilter hooks
256 device uhci # UHCI PCI->USB interface
257 device ohci # OHCI PCI->USB interface
258 device usb # USB Bus (required)
259 device ugen # Generic
260 device uhid # "Human Interface Devices"
261 device ukbd # Keyboard
262 device ulpt # Printer
263 device umass # Disks/Mass storage - Requires scbus and da
265 device uscanner # Scanners
266 device urio # Diamond Rio MP3 Player
267 # USB Ethernet, requires mii
268 device aue # ADMtek USB ethernet
269 device cue # CATC USB ethernet
270 device kue # Kawasaki LSI USB ethernet
273 device firewire # FireWire bus code
274 device sbp # SCSI over FireWire (Requires scbus and da)
275 device fwe # Ethernet over FireWire (non-standard!)