4 # This is rc.conf - a file full of useful variables that you can set
5 # to change the default startup behavior of your system. You should
6 # not edit this file! Put any overrides into one of the ${rc_conf_files}
7 # instead and you will be able to update these defaults later without
8 # spamming your local configuration information.
10 # The ${rc_conf_files} files should only contain values which override
11 # values set in this file. This eases the upgrade path when defaults
12 # are changed and new features are added.
14 # All arguments must be in double or single quotes.
16 # $FreeBSD: src/etc/defaults/rc.conf,v 1.180 2003/06/26 09:50:50 smkelly Exp $
17 # $DragonFly: src/etc/defaults/rc.conf,v 1.23 2005/04/15 18:40:52 joerg Exp $
19 ##############################################################
20 ### Important initial Boot-time options ####################
21 ##############################################################
23 rc_debug="NO" # Set to YES to enable debugging output from rc.d
24 rc_info="YES" # Enables display of informational messages at boot.
25 rcshutdown_timeout="30" # Seconds to wait before terminating rc.shutdown
26 swapfile="NO" # Set to name of swapfile if aux swapfile desired.
27 apm_enable="NO" # Set to YES to enable APM BIOS functions (or NO).
28 apmd_enable="NO" # Run apmd to handle APM event from userland.
29 apmd_flags="" # Flags to apmd (if enabled).
30 battd_enable="NO" # Set to YES to have battd alert on 10% battery power remaining.
31 battd_flags="" # Flags to battd (if enabled).
32 devd_enable="NO" # Run devd, to trigger programs on device tree changes.
33 kldxref_enable="NO" # Build linker.hints files with kldxref(8).
34 kldxref_clobber="NO" # Overwrite old linker.hints at boot.
35 kldxref_module_path="" # Override kern.module_path. A ';'-delimited list.
36 pccard_ifconfig="NO" # Specialized pccard ethernet configuration (or NO).
37 pccard_ether_delay="5" # Delay before trying to start dhclient in pccard_ether
38 removable_interfaces="" # Removable network interfaces for /etc/pccard_ether.
39 local_startup="/usr/local/etc/rc.d /usr/X11R6/etc/rc.d" # startup script dirs.
40 script_name_sep=" " # Change if your startup scripts' names contain spaces
41 rc_conf_files="/etc/rc.conf /etc/rc.conf.local"
42 fsck_y_enable="NO" # Set to YES to do fsck -y if the initial preen fails.
43 netfs_types="nfs:NFS smbfs:SMB portalfs:PORTAL nwfs:NWFS" # Net filesystems.
44 extra_netfs_types="NO" # List of network extra filesystem types for delayed
45 # mount at startup (or NO).
47 ##############################################################
48 ### Network configuration sub-section ######################
49 ##############################################################
51 ### Basic network and firewall/security options: ###
53 # see 'man firewall' for an explanation of the default firewall rules
55 hostname="" # Set this!
56 nisdomainname="NO" # Set to NIS domain if using NIS (or NO).
57 dhclient_program="/sbin/dhclient" # Path to dhcp client program.
58 dhclient_flags="" # Additional flags to pass to dhcp client.
59 dhcpd_enable="NO" # Set to YES to enable the DHCP server
60 dhcrelay_enable="NO" # Set to YES to enable the DHCP relay server
61 firewall_enable="NO" # Set to YES to enable firewall functionality
62 firewall_script="/etc/rc.firewall" # Which script to run to set up the firewall
63 firewall_type="UNKNOWN" # Firewall type (see /etc/rc.firewall)
64 firewall_trusted_nets="192.168.0.0/16" # list of trusted nets
65 firewall_trusted_interfaces="" # list of trusted interfaces e.g. "rl0 xl0"
66 firewall_allowed_icmp_types="0 3 8 11 12 13 14"
67 firewall_open_tcp_ports="22 25 53 80 113 443"
68 firewall_open_udp_ports="53"
69 firewall_quiet="NO" # Set to YES to suppress rule display
70 firewall_logging="NO" # Set to YES to enable events logging
71 firewall_flags="" # Flags passed to ipfw when type is a file
72 ip_portrange_first="NO" # Set first dynamically allocated port
73 ip_portrange_last="NO" # Set last dynamically allocated port
74 ipsec_enable="NO" # Set to YES to run setkey on ipsec_file
75 ipsec_file="/etc/ipsec.conf" # Name of config file for setkey
76 natd_program="/sbin/natd" # path to natd, if you want a different one.
77 natd_enable="NO" # Enable natd (if firewall_enable == YES).
78 natd_interface="" # Public interface or IPaddress to use.
79 natd_flags="" # Additional flags for natd.
80 ipfilter_enable="NO" # Set to YES to enable ipfilter functionality
81 ipfilter_program="/sbin/ipf" # where the ipfilter program lives
82 ipfilter_rules="/etc/ipf.rules" # rules definition file for ipfilter, see
83 # /usr/src/contrib/ipfilter/rules for examples
84 ipfilter_flags="" # additional flags for ipfilter
85 ipnat_enable="NO" # Set to YES to enable ipnat functionality
86 ipnat_program="/sbin/ipnat" # where the ipnat program lives
87 ipnat_rules="/etc/ipnat.rules" # rules definition file for ipnat
88 ipnat_flags="" # additional flags for ipnat
89 ipmon_enable="NO" # Set to YES for ipmon; needs ipfilter or ipnat
90 ipmon_program="/sbin/ipmon" # where the ipfilter monitor program lives
91 ipmon_flags="-Ds" # typically "-Ds" or "-D /var/log/ipflog"
92 ipfs_enable="NO" # Set to YES to enable saving and restoring
93 # of state tables at shutdown and boot
94 ipfs_program="/sbin/ipfs" # where the ipfs program lives
95 ipfs_flags="" # additional flags for ipfs
96 pf_enable="NO" # Set to YES to enable packet filter (pf)
97 pf_rules="/etc/pf.conf" # rules definition file for pf
98 pf_program="/usr/sbin/pfctl" # where the pfctl program lives
99 pf_flags="" # additional flags for pfctl
100 pflog_enable="NO" # Set to YES to enable packet filter logging
101 pflog_logfile="/var/log/pflog" # where pflogd shoule store the logfile
102 pflog_program="/usr/sbin/pflogd" # where the pflogd program lives
103 pflog_flags="" # additional flags for pflogd
104 tcp_extensions="YES" # Set to NO to turn off RFC1323 extensions.
105 log_in_vain="0" # >=1 to log connects to ports w/o listeners.
106 tcp_keepalive="YES" # Enable stale TCP connection timeout (or NO).
107 # For the following option you need to have TCP_DROP_SYNFIN set in your
108 # kernel. Please refer to LINT and NOTES for details.
109 tcp_drop_synfin="NO" # Set to YES to drop TCP packets with SYN+FIN
110 # NOTE: this violates the TCP specification
111 icmp_drop_redirect="NO" # Set to YES to ignore ICMP REDIRECT packets
112 icmp_log_redirect="NO" # Set to YES to log ICMP REDIRECT packets
113 network_interfaces="auto" # List of network interfaces (or "auto").
114 cloned_interfaces="" # List of cloned network interfaces to create.
115 #cloned_interfaces="gif0 gif1 gif2 gif3" # Pre-cloning GENERIC config.
116 ifconfig_lo0="inet 127.0.0.1" # default loopback device configuration.
117 #ifconfig_lo0_alias0="inet 127.0.0.254 netmask 0xffffffff" # Sample alias entry.
118 #ifconfig_ed0_ipx="ipx 0x00010010" # Sample IPX address family entry.
120 # If you have any sppp(4) interfaces above, you might also want to set
121 # the following parameters. Refer to spppcontrol(8) for their meaning.
122 sppp_interfaces="" # List of sppp interfaces.
123 #sppp_interfaces="isp0" # example: sppp over ISDN
124 #spppconfig_isp0="authproto=chap myauthname=foo myauthsecret='top secret' hisauthname=some-gw hisauthsecret='another secret'"
125 gif_interfaces="NO" # List of GIF tunnels (or "NO").
126 #gif_interfaces="gif0 gif1" # Examples typically for a router.
127 # Choose correct tunnel addrs.
128 #gifconfig_gif0="10.1.1.1 10.1.2.1" # Examples typically for a router.
129 #gifconfig_gif1="10.1.1.2 10.1.2.2" # Examples typically for a router.
131 # User ppp configuration.
132 ppp_enable="NO" # Start user-ppp (or NO).
133 ppp_mode="auto" # Choice of "auto", "ddial", "direct" or "dedicated".
134 # For details see man page for ppp(8). Default is auto.
135 ppp_nat="YES" # Use PPP's internal network address translation or NO.
136 ppp_profile="papchap" # Which profile to use from /etc/ppp/ppp.conf.
137 ppp_user="root" # Which user to run ppp as
139 ### Network daemon (miscellaneous) ###
140 syslogd_enable="YES" # Run syslog daemon (or NO).
141 syslogd_program="/usr/sbin/syslogd" # path to syslogd, if you want a different one.
142 #syslogd_flags="-s" # Flags to syslogd (if enabled).
143 syslogd_flags="-ss" # Syslogd flags to not bind an inet socket
144 inetd_enable="NO" # Run the network daemon dispatcher (YES/NO).
145 inetd_program="/usr/sbin/inetd" # path to inetd, if you want a different one.
146 inetd_flags="-wW" # Optional flags to inetd
148 # named. It may be possible to run named in a sandbox, man security for
149 # details. Note: when named_chrootdir is specified, RCNG automatically
152 named_enable="NO" # Run named, the DNS server (or NO).
153 named_program="/usr/sbin/named" # path to named, if you want a different one.
154 named_pidfile="/var/run/named.pid" # Pid file
155 named_chrootdir="/etc/namedb" # Chroot directory (or "" not to auto-chroot it)
158 # kerberos. Do not run the admin daemons on slave servers
160 kerberos5_server_enable="NO" # Run a kerberos 5 master server (or NO).
161 kerberos5_server="/usr/libexec/kdc" # path to kerberos 5 KDC
162 kadmind5_server_enable="NO" # Run kadmind (or NO)
163 kadmind5_server="/usr/libexec/kadmind" # path to kerberos 5 admin daemon
164 kpasswdd_server_enable="NO" # Run kpasswdd (or NO)
165 kpasswdd_server="/usr/libexec/kpasswdd" # path to kerberos 5 passwd daemon
167 rwhod_enable="NO" # Run the rwho daemon (or NO).
168 rwhod_flags="" # Flags for rwhod
169 rarpd_enable="NO" # Run rarpd (or NO).
170 rarpd_flags="" # Flags to rarpd.
171 bootparamd_enable="NO" # Run bootparamd (or NO).
172 bootparamd_flags="" # Flags to bootparamd
173 pppoed_enable="NO" # Run the PPP over Ethernet daemon.
174 pppoed_provider="*" # Provider and ppp(8) config file entry.
175 pppoed_flags="-P /var/run/pppoed.pid" # Flags to pppoed (if enabled).
176 pppoed_interface="fxp0" # The interface that pppoed runs on.
177 sshd_enable="NO" # Enable sshd
178 sshd_program="/usr/sbin/sshd" # path to sshd, if you want a different one.
179 sshd_flags="" # Additional flags for sshd.
181 ### Network File System (NFS): ###
182 ### Server-side options also need rpcbind_enable="YES" ###
184 ### NOTE: attribute cache timeouts only effect NFS lookup rpc's. If
185 ### the mtime matches the data cache is left intact.
187 amd_enable="NO" # Run amd service with $amd_flags (or NO).
188 amd_flags="-a /.amd_mnt -l syslog /host /etc/amd.map /net /etc/amd.map"
189 amd_map_program="NO" # Can be set to "ypcat -k amd.master"
190 nfs_client_enable="NO" # This host is an NFS client (or NO).
191 nfs_client_flags="-n 4" # Flags to nfsiod (if enabled).
192 nfs_access_cache="5" # Client attribute cache timeout in seconds
193 #nfs_neg_cache="3" # Client attribute negative hit cache timeout
194 nfs_server_enable="NO" # This host is an NFS server (or NO).
195 nfs_server_flags="-u -t -n 4" # Flags to nfsd (if enabled).
196 mountd_enable="NO" # Run mountd (or NO).
197 mountd_flags="-r" # Flags to mountd (if NFS server enabled).
198 weak_mountd_authentication="NO" # Allow non-root mount requests to be served.
199 nfs_reserved_port_only="NO" # Provide NFS only on secure port (or NO).
200 nfs_bufpackets="" # bufspace (in packets) for client
201 rpc_lockd_enable="NO" # Run NFS rpc.lockd needed for client/server.
202 rpc_statd_enable="NO" # Run NFS rpc.statd needed for client/server.
203 rpc_umntall_enable="YES" # Run NFS rpc.umntall on boot and shutdown
204 rpcbind_enable="NO" # Run the portmapper service (YES/NO).
205 # this is rpcbind in 5.x
206 rpcbind_program="/usr/sbin/portmap" # path to rpcbind, if you want a different one.
207 rpcbind_flags="" # Flags to rpcbind (if enabled).
208 rpc_ypupdated_enable="NO" # Run if NIS master and SecureRPC (or NO).
209 keyserv_enable="NO" # Run the SecureRPC keyserver (or NO).
210 keyserv_flags="" # Flags to keyserv (if enabled).
212 ### Network Time Services options: ###
213 timed_enable="NO" # Run the time daemon (or NO).
214 timed_flags="" # Flags to timed (if enabled).
215 ntpd_enable="NO" # Run ntpd Network Time Protocol (or NO).
216 ntpd_program="/usr/sbin/ntpd" # path to ntpd, if you want a different one.
217 ntpd_flags="-s" # Flags to ntpd (if enabled).
219 # Network Information Services (NIS) options: All need rpcbind_enable="YES" ###
220 nis_client_enable="NO" # We're an NIS client (or NO).
221 nis_client_flags="" # Flags to ypbind (if enabled).
222 nis_ypset_enable="NO" # Run ypset at boot time (or NO).
223 nis_ypset_flags="" # Flags to ypset (if enabled).
224 nis_server_enable="NO" # We're an NIS server (or NO).
225 nis_server_flags="" # Flags to ypserv (if enabled).
226 nis_ypxfrd_enable="NO" # Run rpc.ypxfrd at boot time (or NO).
227 nis_ypxfrd_flags="" # Flags to rpc.ypxfrd (if enabled).
228 nis_yppasswdd_enable="NO" # Run rpc.yppasswdd at boot time (or NO).
229 nis_yppasswdd_flags="" # Flags to rpc.yppasswdd (if enabled).
231 ### Network routing options: ###
232 defaultrouter="NO" # Set to default gateway (or NO).
233 static_routes="" # Set to static route list (or leave empty).
234 gateway_enable="NO" # Set to YES if this host will be a gateway.
235 router_enable="NO" # Set to YES to enable a routing daemon.
236 router="/sbin/routed" # Name of routing daemon to use if enabled.
237 router_flags="-q" # Flags for routing daemon.
238 mrouted_enable="NO" # Do multicast routing (see /etc/mrouted.conf).
239 mrouted_flags="" # Flags for multicast routing daemon.
240 ipxgateway_enable="NO" # Set to YES to enable IPX routing.
241 ipxrouted_enable="NO" # Set to YES to run the IPX routing daemon.
242 ipxrouted_flags="" # Flags for IPX routing daemon.
243 arpproxy_all="NO" # replaces obsolete kernel option ARP_PROXYALL.
244 forward_sourceroute="NO" # do source routing (only if gateway_enable is set to "YES")
245 accept_sourceroute="NO" # accept source routed packets to us
247 ### ATM interface options: ###
248 atm_enable="NO" # Configure ATM interfaces (or NO).
249 #atm_netif_hea0="atm 1" # Network interfaces for physical interface.
250 #atm_sigmgr_hea0="uni31" # Signalling manager for physical interface.
251 #atm_prefix_hea0="ILMI" # NSAP prefix (UNI interfaces only) (or ILMI).
252 #atm_macaddr_hea0="NO" # Override physical MAC address (or NO).
253 #atm_arpserver_atm0="0x47.0005.80.999999.9999.9999.9999.999999999999.00" # ATMARP server address (or local).
254 #atm_scsparp_atm0="NO" # Run SCSP/ATMARP on network interface (or NO).
255 atm_pvcs="" # Set to PVC list (or leave empty).
256 atm_arps="" # Set to permanent ARP list (or leave empty).
258 ### ISDN interface options: (see also: /usr/share/examples/isdn) ###
259 isdn_enable="NO" # Enable the ISDN subsystem (or NO).
260 isdn_fsdev="NO" # Output device for fullscreen mode (or NO for daemon mode).
261 isdn_flags="-dn -d0x1f9" # Flags for isdnd
262 isdn_ttype="cons25" # terminal type for fullscreen mode
263 isdn_screenflags="NO" # screenflags for ${isdn_fsdev}
264 isdn_trace="NO" # Enable the ISDN trace subsystem (or NO).
265 isdn_traceflags="-f /var/tmp/isdntrace0" # Flags for isdntrace
267 ### Miscellaneous network options: ###
268 icmp_bmcastecho="NO" # respond to broadcast ping packets
270 ### IPv6 options: ###
271 ipv6_enable="NO" # Set to YES to set up for IPv6.
272 ipv6_network_interfaces="auto" # List of network interfaces (or "auto").
273 ipv6_defaultrouter="NO" # Set to IPv6 default gateway (or NO).
274 #ipv6_defaultrouter="2002:c058:6301::" # Use this for 6to4 (RFC 3068)
275 ipv6_static_routes="" # Set to static route list (or leave empty).
276 #ipv6_static_routes="xxx" # An example to set fec0:0000:0000:0006::/64
277 # route toward loopback interface.
278 #ipv6_route_xxx="fec0:0000:0000:0006:: -prefixlen 64 ::1"
279 ipv6_gateway_enable="NO" # Set to YES if this host will be a gateway.
280 ipv6_router_enable="NO" # Set to YES to enable an IPv6 routing daemon.
281 ipv6_router="/usr/sbin/route6d" # Name of IPv6 routing daemon.
282 ipv6_router_flags="" # Flags to IPv6 routing daemon.
283 #ipv6_router_flags="-l" # Example for route6d with only IPv6 site local
285 #ipv6_router_flags="-q" # If you want to run a routing daemon on an end
286 # node, you should stop advertisement.
287 #ipv6_network_interfaces="ed0 ep0" # Examples for router
288 # or static configuration for end node.
289 # Choose correct prefix value.
290 #ipv6_prefix_ed0="fec0:0000:0000:0001 fec0:0000:0000:0002" # Examples for rtr.
291 #ipv6_prefix_ep0="fec0:0000:0000:0003 fec0:0000:0000:0004" # Examples for rtr.
292 #ipv6_ifconfig_ed0="fec0:0:0:5::1 prefixlen 64" # Sample manual assign entry
293 #ipv6_ifconfig_ed0_alias0="fec0:0:0:5::2 prefixlen 64" # Sample alias entry.
294 ipv6_default_interface="NO" # Default output interface for scoped addrs.
295 # Now this works only for IPv6 link local
297 rtadvd_enable="NO" # Set to YES to enable an IPv6 router
298 # advertisement daemon. If set to YES,
299 # this router becomes a possible candidate
300 # IPv6 default router for local subnets.
301 rtadvd_interfaces="" # Interfaces rtadvd sends RA packets.
302 mroute6d_enable="NO" # Do IPv6 multicast routing.
303 mroute6d_program="/usr/local/sbin/pim6dd" # Name of IPv6 multicast
304 # routing daemon. You need to
305 # install it from package or
307 mroute6d_flags="" # Flags to IPv6 multicast routing daemon.
308 stf_interface_ipv4addr="" # Local IPv4 addr for 6to4 IPv6 over IPv4
309 # tunneling interface. Specify this entry
310 # to enable 6to4 interface.
311 stf_interface_ipv4plen="0" # Prefix length for 6to4 IPv4 addr,
312 # to limit peer addr range. Effective value
314 stf_interface_ipv6_ifid="0:0:0:1" # IPv6 interface id for stf0.
315 # If you like, you can set "AUTO" for this.
316 stf_interface_ipv6_slaid="0000" # IPv6 Site Level Aggregator for stf0
317 ipv6_faith_prefix="NO" # Set faith prefix to enable a FAITH
318 # IPv6-to-IPv4 TCP translator. You also need
320 ipv6_ipv4mapping="NO" # Set to "YES" to enable IPv4 mapped IPv6 addr
321 # communication. (like ::ffff:a.b.c.d)
322 ipv6_firewall_enable="NO" # Set to YES to enable IPv6 firewall
324 ipv6_firewall_script="/etc/rc.firewall6" # Which script to run to set up the IPv6 firewall
325 ipv6_firewall_type="UNKNOWN" # IPv6 Firewall type (see /etc/rc.firewall6)
326 ipv6_firewall_quiet="NO" # Set to YES to suppress rule display
327 ipv6_firewall_logging="NO" # Set to YES to enable events logging
328 ipv6_firewall_flags="" # Flags passed to ip6fw when type is a file
329 ipv6_ipfilter_rules="/etc/ipf6.rules" # rules definition file for ipfilter,
330 # see /usr/src/contrib/ipfilter/rules
333 ##############################################################
334 ### System console options #################################
335 ##############################################################
337 keymap="NO" # keymap in /usr/share/syscons/keymaps/* (or NO).
338 keyrate="NO" # keyboard rate to: slow, normal, fast (or NO).
339 keybell="NO" # See kbdcontrol(1) for options. Use "off" to disable.
340 keychange="NO" # function keys default values (or NO).
341 cursor="NO" # cursor type {normal|blink|destructive} (or NO).
342 scrnmap="NO" # screen map in /usr/share/syscons/scrnmaps/* (or NO).
343 font8x16="NO" # font 8x16 from /usr/share/syscons/fonts/* (or NO).
344 font8x14="NO" # font 8x14 from /usr/share/syscons/fonts/* (or NO).
345 font8x8="NO" # font 8x8 from /usr/share/syscons/fonts/* (or NO).
346 blanktime="300" # blank time (in seconds) or "NO" to turn it off.
347 saver="NO" # screen saver: Uses /modules/${saver}_saver.ko
348 moused_enable="NO" # Run the mouse daemon.
349 moused_type="auto" # See man page for rc.conf(5) for available settings.
350 moused_port="/dev/psm0" # Set to your mouse port.
351 moused_flags="" # Any additional flags to moused.
352 mousechar_start="NO" # if 0xd0-0xd3 default range is occupied in your
353 # language code table, specify alternative range
354 # start like mousechar_start=3, see vidcontrol(1)
355 allscreens_flags="" # Set this vidcontrol mode for all virtual screens
356 allscreens_kbdflags="" # Set this kbdcontrol mode for all virtual screens
359 ##############################################################
360 ### pcvt console driver options ############################
361 ##############################################################
363 pcvt_verbose="NO" # set to YES to enable verbose configuration messages
364 pcvt_keymap="NO" # keyboard map in /usr/share/misc/keycap.pcvt (or NO).
365 pcvt_keydel="NO" # key repeat delay, 0-3 (250,500,750,1000 msec) (or NO).
366 pcvt_keyrate="NO" # keyboard repetition rate 31-0 (2-30 char/sec) (or NO).
367 pcvt_keyrepeat="NO" # keyboard repeat ON or OFF (or NO).
368 pcvt_force24="NO" # force a 24 line display (when 25 possible) (or NO).
369 pcvt_hpext="NO" # use HP extensions (function keys labels) (or NO).
370 pcvt_lines="NO" # lines (25, 28, 40, 50 or NO).
371 pcvt_blanktime="NO" # blank time (in seconds) (or NO).
372 pcvt_cursorh="NO" # cursor top scanline (topmost line is 0) (or NO).
373 pcvt_cursorl="NO" # cursor low scanline (bottom line is 16) (or NO).
374 pcvt_monohigh="NO" # set intensity to high on monochrome monitors (or NO).
377 ##############################################################
378 ### Mail Transfer Agent (MTA) options ######################
379 ##############################################################
381 mta_start_script="/etc/rc.sendmail"
382 # Script to start your chosen MTA, called by /etc/rc.
383 # Settings for /etc/rc.sendmail:
384 sendmail_enable="NO" # Run the sendmail inbound daemon (YES/NO).
385 sendmail_flags="-L sm-mta -bd -q30m" # Flags to sendmail (as a server)
386 sendmail_submit_enable="YES" # Start a localhost-only MTA for mail submission
387 sendmail_submit_flags="-L sm-mta -bd -q30m -ODaemonPortOptions=Addr=localhost"
388 # Flags for localhost-only MTA
389 sendmail_outbound_enable="YES" # Dequeue stuck mail (YES/NO).
390 sendmail_outbound_flags="-L sm-queue -q30m" # Flags to sendmail (outbound only)
391 sendmail_msp_queue_enable="YES" # Dequeue stuck clientmqueue mail (YES/NO).
392 sendmail_msp_queue_flags="-L sm-msp-queue -Ac -q30m"
393 # Flags for sendmail_msp_queue daemon.
396 ##############################################################
397 ### Miscellaneous administrative options ###################
398 ##############################################################
400 mixer_enable="NO" # Manage mixer settings across reboots
401 cron_enable="YES" # Run the periodic job daemon.
402 cron_program="/usr/sbin/cron" # Which cron executable to run (if enabled).
403 cron_flags="" # Which options to pass to the cron daemon.
404 lpd_enable="NO" # Run the line printer daemon.
405 lpd_program="/usr/sbin/lpd" # path to lpd, if you want a different one.
406 lpd_flags="" # Flags to lpd (if enabled).
407 usbd_enable="NO" # Run the usbd daemon.
408 usbd_flags="" # Flags to usbd (if enabled).
409 dumpdev="NO" # Device name to crashdump to (or NO).
410 dumpdir="/var/crash" # Directory where crash dumps are to be stored
411 savecore_flags="" # Used if dumpdev is enabled above, and present.
412 enable_quotas="NO" # turn on quotas on startup (or NO).
413 check_quotas="YES" # Check quotas on startup (or NO).
414 accounting_enable="NO" # Turn on process accounting (or NO).
415 ibcs2_enable="NO" # Ibcs2 (SCO) emulation loaded at startup (or NO).
416 ibcs2_loaders="coff" # List of additional Ibcs2 loaders (or NO).
417 sysvipc_enable="NO" # Load System V IPC primitives at startup (or NO).
418 linux_enable="NO" # Linux binary compatibility loaded at startup (or NO).
419 svr4_enable="NO" # SysVR4 emulation loaded at startup (or NO).
420 osf1_enable="NO" # Alpha OSF/1 emulation loaded at startup (or NO).
421 clear_tmp_enable="NO" # Clear /tmp at startup.
422 ldconfig_insecure="NO" # Set to YES to disable ldconfig security checks
423 ldconfig_paths="/usr/lib/compat /usr/X11R6/lib /usr/local/lib"
424 # shared library search paths
425 ldconfig_paths_aout="/usr/lib/compat/aout /usr/X11R6/lib/aout /usr/local/lib/aout"
426 # a.out shared library search paths
427 kern_securelevel_enable="NO" # kernel security level (see init(8)),
428 kern_securelevel="-1" # range: -1..3 ; `-1' is the most insecure
429 lomac_enable="NO" # start lomac(4) security module at boot
430 update_motd="YES" # update version info in /etc/motd (or NO)
431 start_vinum="NO" # set to YES to start vinum
432 unaligned_print="YES" # print unaligned access warnings on the alpha (or NO).
433 rand_irqs="NO" # Stir the entropy pool (like "5 11" or NO).
434 dmesg_enable="YES" # Save dmesg(8) to /var/run/dmesg.boot
435 jail_enable="NO" # Set to NO to disable starting of any jails
436 jail_list="" # Space separated list of names of jails
437 jail_set_hostname_allow="YES" # Allow root user in a jail to change its hostname
438 jail_socket_unixiproute_only="YES" # Route only TCP/IP within a jail
439 jail_sysvipc_allow="NO" # Allow SystemV IPC use from within a jail
440 resident_enable="NO" # Proccess /etc/resident.conf
441 varsym_enable="NO" # Proccess /etc/varsym.conf
442 watchdogd_enable="NO" # Start the software watchdog daemon
444 ##############################################################
445 ### Define source_rc_confs, the mechanism used by /etc/rc.* ##
446 ### scripts to source rc_conf_files overrides safely. ##
447 ##############################################################
449 if [ -z "${source_rc_confs_defined}" ]; then
450 source_rc_confs_defined=yes
452 local i sourced_files
453 for i in ${rc_conf_files}; do
454 case ${sourced_files} in
458 sourced_files="${sourced_files}:$i:"
projects / dragonfly.git / blob