Merge branch 'vendor/DIALOG'
[dragonfly.git] / share / man / man4 / acpi_thermal.4
1 .\" Copyright (c) 2003 Takanori Watanabe.
2 .\" All rights reserved.
3 .\"
4 .\" Redistribution and use in source and binary forms, with or without
5 .\" modification, are permitted provided that the following conditions
6 .\" are met:
7 .\" 1. Redistributions of source code must retain the above copyright
8 .\"    notice, this list of conditions and the following disclaimer.
9 .\" 2. Redistributions in binary form must reproduce the above copyright
10 .\"    notice, this list of conditions and the following disclaimer in the
11 .\"    documentation and/or other materials provided with the distribution.
12 .\"
13 .\" THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
14 .\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
15 .\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
16 .\" ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
17 .\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
18 .\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
19 .\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
20 .\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
21 .\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
22 .\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
23 .\" SUCH DAMAGE.
24 .\"
25 .\" $FreeBSD: head/share/man/man4/acpi_thermal.4 167670 2007-03-18 00:57:07Z njl $
26 .\"
27 .Dd May 16, 2015
28 .Dt ACPI_THERMAL 4
29 .Os
30 .Sh NAME
31 .Nm acpi_thermal
32 .Nd ACPI thermal management subsystem
33 .Sh SYNOPSIS
34 .Cd "device acpi"
35 .Sh DESCRIPTION
36 The
37 .Nm
38 driver provides the thermal management features of the ACPI module.
39 This driver has a
40 .Xr sysctl 8
41 interface and a
42 .Xr devd 8
43 notification interface.
44 The sysctls export properties of each ACPI thermal zone object.
45 .Pp
46 There can be multiple thermal zones in a system.
47 For example, each CPU and the enclosure could all be separate thermal
48 zones, each with its own setpoints and cooling devices.
49 Thermal zones are numbered sequentially in the order they appear in
50 the AML.
51 .Pp
52 The
53 .Nm
54 driver also activates the active cooling system according to
55 each thermal zone's setpoints.
56 .Sh SYSCTL VARIABLES
57 .Bl -tag -width indent
58 .It Va hw.acpi.thermal.min_runtime
59 Number of seconds to continue active cooling once started.
60 A new active cooling level will not be selected until this interval expires.
61 .It Va hw.acpi.thermal.polling_rate
62 Number of seconds between polling the current temperature.
63 If set to 0, temperature polling is deactivated.
64 Use with care, strange hardware-specific issues can occur when a wrong
65 value is set.
66 Some systems will always report the same temperature when the polling
67 period is too low.
68 Also ACPI based fan control can stop working when the wrong value is
69 set here.
70 .It Va hw.acpi.thermal.user_override
71 If set to 1, allow user override of various setpoints (below).
72 The original values for these settings are obtained from the BIOS and
73 system overheating and possible damage could occur if changed.
74 Default is 0 (no override).
75 .It Va hw.acpi.thermal.tz%d.active
76 Current active cooling system state.
77 If this is non-negative, the appropriate _AC%d object is running.
78 Set this value to the desired active cooling level to force
79 the corresponding fan object to the appropriate level.
80 .It Va hw.acpi.thermal.tz%d.passive_cooling
81 If set to 1, passive cooling is enabled.
82 .\"It does cooling without fans using
83 .\".Xr cpufreq 4
84 .\"as the mechanism for controlling CPU speed.
85 Default is enabled for tz0 where it is available.
86 .It Va hw.acpi.thermal.tz%d.thermal_flags
87 Current thermal zone status.
88 These are bit-masked values.
89 .It Va hw.acpi.thermal.tz%d.temperature
90 Current temperature for this zone.
91 .It Va hw.acpi.thermal.tz%d._PSV
92 Temperature to start passive cooling by throttling down CPU, etc.
93 This value can be overridden by the user.
94 .It Va hw.acpi.thermal.tz%d._HOT
95 Temperature to start critical suspend to disk (S4).
96 This value can be overridden by the user.
97 .It Va hw.acpi.thermal.tz%d._CRT
98 Temperature to start critical shutdown (S5).
99 This value can be overridden by the user.
100 .It Va hw.acpi.thermal.tz%d._ACx
101 Temperatures at which to switch to the corresponding active cooling
102 level.
103 The lower the _ACx value, the higher the cooling power.
104 .El
105 .Pp
106 All temperatures are printed in Celsius.
107 Values can be set in Celsius (by providing a trailing
108 .Qq C )
109 or Kelvin (by leaving off any trailing letter).
110 When setting a value by
111 .Xr sysctl 8 ,
112 do not specify a trailing decimal (i.e., 90C instead of 90.0C).
113 .Sh NOTIFIES
114 Notifies are passed to userland via
115 .Xr devd 8 .
116 See
117 .Pa /etc/devd.conf
118 and
119 .Xr devd.conf 5
120 for examples.
121 The
122 .Nm
123 driver sends events with the following attributes:
124 .Pp
125 .Bl -tag -width "subsystem" -compact
126 .It system
127 .Li ACPI
128 .It subsystem
129 .Li Thermal
130 .It type
131 The fully qualified thermal zone object path as in the ASL.
132 .It notify
133 An integer designating the event:
134 .Pp
135 .Bl -tag -width indent -compact
136 .It Li 0x80
137 Current temperature has changed.
138 .It Li 0x81
139 One or more trip points (_ACx, _PSV) have changed.
140 .It Li 0x82
141 One or more device lists (_ALx, _PSL, _TZD) have changed.
142 .It Li 0xcc
143 Non-standard notify that the system will shutdown if the temperature
144 stays above _CRT or _HOT for one more poll cycle.
145 .El
146 .El
147 .Sh SEE ALSO
148 .Xr acpi 4 ,
149 .\".Xr cpufreq 4 ,
150 .Xr acpidump 8
151 .Sh AUTHORS
152 .An -nosplit
153 .An Michael Smith
154 .Pp
155 This manual page was written by
156 .An Takanori Watanabe .