ccd45afc4419146e53648ce35d81cd59cb573d5e
[dragonfly.git] / sys / dev / disk / mpt / mpilib / mpi_cnfg.h
1 /* $FreeBSD: src/sys/dev/mpt/mpilib/mpi_cnfg.h,v 1.9 2007/06/03 22:58:26 scottl Exp $ */
2 /*-
3  * Copyright (c) 2000-2005, LSI Logic Corporation and its contributors.
4  * All rights reserved.
5  *
6  * Redistribution and use in source and binary forms, with or without
7  * modification, are permitted provided that the following conditions are
8  * met:
9  * 1. Redistributions of source code must retain the above copyright
10  *    notice, this list of conditions and the following disclaimer.
11  * 2. Redistributions in binary form must reproduce at minimum a disclaimer
12  *    substantially similar to the "NO WARRANTY" disclaimer below
13  *    ("Disclaimer") and any redistribution must be conditioned upon including
14  *    a substantially similar Disclaimer requirement for further binary
15  *    redistribution.
16  * 3. Neither the name of the LSI Logic Corporation nor the names of its
17  *    contributors may be used to endorse or promote products derived from
18  *    this software without specific prior written permission.
19  *
20  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
21  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
22  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
23  * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
24  * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
25  * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
26  * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
27  * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
28  * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
29  * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF THE COPYRIGHT
30  * OWNER OR CONTRIBUTOR IS ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
31  *
32  *           Name:  mpi_cnfg.h
33  *          Title:  MPI Config message, structures, and Pages
34  *  Creation Date:  July 27, 2000
35  *
36  *    mpi_cnfg.h Version:  01.05.15
37  *
38  *  Version History
39  *  ---------------
40  *
41  *  Date      Version   Description
42  *  --------  --------  ------------------------------------------------------
43  *  05-08-00  00.10.01  Original release for 0.10 spec dated 4/26/2000.
44  *  06-06-00  01.00.01  Update version number for 1.0 release.
45  *  06-08-00  01.00.02  Added _PAGEVERSION definitions for all pages.
46  *                      Added FcPhLowestVersion, FcPhHighestVersion, Reserved2
47  *                      fields to FC_DEVICE_0 page, updated the page version.
48  *                      Changed _FREE_RUNNING_CLOCK to _PACING_TRANSFERS in
49  *                      SCSI_PORT_0, SCSI_DEVICE_0 and SCSI_DEVICE_1 pages
50  *                      and updated the page versions.
51  *                      Added _RESPONSE_ID_MASK definition to SCSI_PORT_1
52  *                      page and updated the page version.
53  *                      Added Information field and _INFO_PARAMS_NEGOTIATED
54  *                      definitionto SCSI_DEVICE_0 page.
55  *  06-22-00  01.00.03  Removed batch controls from LAN_0 page and updated the
56  *                      page version.
57  *                      Added BucketsRemaining to LAN_1 page, redefined the
58  *                      state values, and updated the page version.
59  *                      Revised bus width definitions in SCSI_PORT_0,
60  *                      SCSI_DEVICE_0 and SCSI_DEVICE_1 pages.
61  *  06-30-00  01.00.04  Added MaxReplySize to LAN_1 page and updated the page
62  *                      version.
63  *                      Moved FC_DEVICE_0 PageAddress description to spec.
64  *  07-27-00  01.00.05  Corrected the SubsystemVendorID and SubsystemID field
65  *                      widths in IOC_0 page and updated the page version.
66  *  11-02-00  01.01.01  Original release for post 1.0 work
67  *                      Added Manufacturing pages, IO Unit Page 2, SCSI SPI
68  *                      Port Page 2, FC Port Page 4, FC Port Page 5
69  *  11-15-00  01.01.02  Interim changes to match proposals
70  *  12-04-00  01.01.03  Config page changes to match MPI rev 1.00.01.
71  *  12-05-00  01.01.04  Modified config page actions.
72  *  01-09-01  01.01.05  Added defines for page address formats.
73  *                      Data size for Manufacturing pages 2 and 3 no longer
74  *                      defined here.
75  *                      Io Unit Page 2 size is fixed at 4 adapters and some
76  *                      flags were changed.
77  *                      SCSI Port Page 2 Device Settings modified.
78  *                      New fields added to FC Port Page 0 and some flags
79  *                      cleaned up.
80  *                      Removed impedance flash from FC Port Page 1.
81  *                      Added FC Port pages 6 and 7.
82  *  01-25-01  01.01.06  Added MaxInitiators field to FcPortPage0.
83  *  01-29-01  01.01.07  Changed some defines to make them 32 character unique.
84  *                      Added some LinkType defines for FcPortPage0.
85  *  02-20-01  01.01.08  Started using MPI_POINTER.
86  *  02-27-01  01.01.09  Replaced MPI_CONFIG_PAGETYPE_SCSI_LUN with
87  *                      MPI_CONFIG_PAGETYPE_RAID_VOLUME.
88  *                      Added definitions and structures for IOC Page 2 and
89  *                      RAID Volume Page 2.
90  *  03-27-01  01.01.10  Added CONFIG_PAGE_FC_PORT_8 and CONFIG_PAGE_FC_PORT_9.
91  *                      CONFIG_PAGE_FC_PORT_3 now supports persistent by DID.
92  *                      Added VendorId and ProductRevLevel fields to
93  *                      RAIDVOL2_IM_PHYS_ID struct.
94  *                      Modified values for MPI_FCPORTPAGE0_FLAGS_ATTACH_
95  *                      defines to make them compatible to MPI version 1.0.
96  *                      Added structure offset comments.
97  *  04-09-01  01.01.11  Added some new defines for the PageAddress field and
98  *                      removed some obsolete ones.
99  *                      Added IO Unit Page 3.
100  *                      Modified defines for Scsi Port Page 2.
101  *                      Modified RAID Volume Pages.
102  *  08-08-01  01.02.01  Original release for v1.2 work.
103  *                      Added SepID and SepBus to RVP2 IMPhysicalDisk struct.
104  *                      Added defines for the SEP bits in RVP2 VolumeSettings.
105  *                      Modified the DeviceSettings field in RVP2 to use the
106  *                      proper structure.
107  *                      Added defines for SES, SAF-TE, and cross channel for
108  *                      IOCPage2 CapabilitiesFlags.
109  *                      Removed define for MPI_IOUNITPAGE2_FLAGS_RAID_DISABLE.
110  *                      Removed define for
111  *                      MPI_SCSIPORTPAGE2_PORT_FLAGS_PARITY_ENABLE.
112  *                      Added define for MPI_CONFIG_PAGEATTR_RO_PERSISTENT.
113  *  08-29-01 01.02.02   Fixed value for MPI_MANUFACTPAGE_DEVID_53C1035.
114  *                      Added defines for MPI_FCPORTPAGE1_FLAGS_HARD_ALPA_ONLY
115  *                      and MPI_FCPORTPAGE1_FLAGS_IMMEDIATE_ERROR_REPLY.
116  *                      Removed MPI_SCSIPORTPAGE0_CAP_PACING_TRANSFERS,
117  *                      MPI_SCSIDEVPAGE0_NP_PACING_TRANSFERS, and
118  *                      MPI_SCSIDEVPAGE1_RP_PACING_TRANSFERS, and
119  *                      MPI_SCSIDEVPAGE1_CONF_PPR_ALLOWED.
120  *                      Added defines for MPI_SCSIDEVPAGE1_CONF_WDTR_DISALLOWED
121  *                      and MPI_SCSIDEVPAGE1_CONF_SDTR_DISALLOWED.
122  *                      Added OnBusTimerValue to CONFIG_PAGE_SCSI_PORT_1.
123  *                      Added rejected bits to SCSI Device Page 0 Information.
124  *                      Increased size of ALPA array in FC Port Page 2 by one
125  *                      and removed a one byte reserved field.
126  *  09-28-01 01.02.03   Swapped NegWireSpeedLow and NegWireSpeedLow in
127  *                      CONFIG_PAGE_LAN_1 to match preferred 64-bit ordering.
128  *                      Added structures for Manufacturing Page 4, IO Unit
129  *                      Page 3, IOC Page 3, IOC Page 4, RAID Volume Page 0, and
130  *                      RAID PhysDisk Page 0.
131  *  10-04-01 01.02.04   Added define for MPI_CONFIG_PAGETYPE_RAID_PHYSDISK.
132  *                      Modified some of the new defines to make them 32
133  *                      character unique.
134  *                      Modified how variable length pages (arrays) are defined.
135  *                      Added generic defines for hot spare pools and RAID
136  *                      volume types.
137  *  11-01-01 01.02.05   Added define for MPI_IOUNITPAGE1_DISABLE_IR.
138  *  03-14-02 01.02.06   Added PCISlotNum field to CONFIG_PAGE_IOC_1 along with
139  *                      related define, and bumped the page version define.
140  *  05-31-02 01.02.07   Added a Flags field to CONFIG_PAGE_IOC_2_RAID_VOL in a
141  *                      reserved byte and added a define.
142  *                      Added define for
143  *                      MPI_RAIDVOL0_STATUS_FLAG_VOLUME_INACTIVE.
144  *                      Added new config page: CONFIG_PAGE_IOC_5.
145  *                      Added MaxAliases, MaxHardAliases, and NumCurrentAliases
146  *                      fields to CONFIG_PAGE_FC_PORT_0.
147  *                      Added AltConnector and NumRequestedAliases fields to
148  *                      CONFIG_PAGE_FC_PORT_1.
149  *                      Added new config page: CONFIG_PAGE_FC_PORT_10.
150  *  07-12-02 01.02.08   Added more MPI_MANUFACTPAGE_DEVID_ defines.
151  *                      Added additional MPI_SCSIDEVPAGE0_NP_ defines.
152  *                      Added more MPI_SCSIDEVPAGE1_RP_ defines.
153  *                      Added define for
154  *                      MPI_SCSIDEVPAGE1_CONF_EXTENDED_PARAMS_ENABLE.
155  *                      Added new config page: CONFIG_PAGE_SCSI_DEVICE_3.
156  *                      Modified MPI_FCPORTPAGE5_FLAGS_ defines.
157  *  09-16-02 01.02.09   Added MPI_SCSIDEVPAGE1_CONF_FORCE_PPR_MSG define.
158  *  11-15-02 01.02.10   Added ConnectedID defines for CONFIG_PAGE_SCSI_PORT_0.
159  *                      Added more Flags defines for CONFIG_PAGE_FC_PORT_1.
160  *                      Added more Flags defines for CONFIG_PAGE_FC_DEVICE_0.
161  *  04-01-03 01.02.11   Added RR_TOV field and additional Flags defines for
162  *                      CONFIG_PAGE_FC_PORT_1.
163  *                      Added define MPI_FCPORTPAGE5_FLAGS_DISABLE to disable
164  *                      an alias.
165  *                      Added more device id defines.
166  *  06-26-03 01.02.12   Added MPI_IOUNITPAGE1_IR_USE_STATIC_VOLUME_ID define.
167  *                      Added TargetConfig and IDConfig fields to
168  *                      CONFIG_PAGE_SCSI_PORT_1.
169  *                      Added more PortFlags defines for CONFIG_PAGE_SCSI_PORT_2
170  *                      to control DV.
171  *                      Added more Flags defines for CONFIG_PAGE_FC_PORT_1.
172  *                      In CONFIG_PAGE_FC_DEVICE_0, replaced Reserved1 field
173  *                      with ADISCHardALPA.
174  *                      Added MPI_FC_DEVICE_PAGE0_PROT_FCP_RETRY define.
175  *  01-16-04 01.02.13   Added InitiatorDeviceTimeout and InitiatorIoPendTimeout
176  *                      fields and related defines to CONFIG_PAGE_FC_PORT_1.
177  *                      Added define for
178  *                      MPI_FCPORTPAGE1_FLAGS_SOFT_ALPA_FALLBACK.
179  *                      Added new fields to the substructures of
180  *                      CONFIG_PAGE_FC_PORT_10.
181  *  04-29-04 01.02.14   Added define for IDP bit for CONFIG_PAGE_SCSI_PORT_0,
182  *                      CONFIG_PAGE_SCSI_DEVICE_0, and
183  *                      CONFIG_PAGE_SCSI_DEVICE_1. Also bumped Page Version for
184  *                      these pages.
185  *  05-11-04 01.03.01   Added structure for CONFIG_PAGE_INBAND_0.
186  *  08-19-04 01.05.01   Modified MSG_CONFIG request to support extended config
187  *                      pages.
188  *                      Added a new structure for extended config page header.
189  *                      Added new extended config pages types and structures for
190  *                      SAS IO Unit, SAS Expander, SAS Device, and SAS PHY.
191  *                      Replaced a reserved byte in CONFIG_PAGE_MANUFACTURING_4
192  *                      to add a Flags field.
193  *                      Two new Manufacturing config pages (5 and 6).
194  *                      Two new bits defined for IO Unit Page 1 Flags field.
195  *                      Modified CONFIG_PAGE_IO_UNIT_2 to add three new fields
196  *                      to specify the BIOS boot device.
197  *                      Four new Flags bits defined for IO Unit Page 2.
198  *                      Added IO Unit Page 4.
199  *                      Added EEDP Flags settings to IOC Page 1.
200  *                      Added new BIOS Page 1 config page.
201  *  10-05-04 01.05.02   Added define for
202  *                      MPI_IOCPAGE1_INITIATOR_CONTEXT_REPLY_DISABLE.
203  *                      Added new Flags field to CONFIG_PAGE_MANUFACTURING_5 and
204  *                      associated defines.
205  *                      Added more defines for SAS IO Unit Page 0
206  *                      DiscoveryStatus field.
207  *                      Added define for MPI_SAS_IOUNIT0_DS_SUBTRACTIVE_LINK
208  *                      and MPI_SAS_IOUNIT0_DS_TABLE_LINK.
209  *                      Added defines for Physical Mapping Modes to SAS IO Unit
210  *                      Page 2.
211  *                      Added define for
212  *                      MPI_SAS_DEVICE0_FLAGS_PORT_SELECTOR_ATTACH.
213  *  10-27-04 01.05.03   Added defines for new SAS PHY page addressing mode.
214  *                      Added defines for MaxTargetSpinUp to BIOS Page 1.
215  *                      Added 5 new ControlFlags defines for SAS IO Unit
216  *                      Page 1.
217  *                      Added MaxNumPhysicalMappedIDs field to SAS IO Unit
218  *                      Page 2.
219  *                      Added AccessStatus field to SAS Device Page 0 and added
220  *                      new Flags bits for supported SATA features.
221  *  12-07-04  01.05.04  Added config page structures for BIOS Page 2, RAID
222  *                      Volume Page 1, and RAID Physical Disk Page 1.
223  *                      Replaced IO Unit Page 1 BootTargetID,BootBus, and
224  *                      BootAdapterNum with reserved field.
225  *                      Added DataScrubRate and ResyncRate to RAID Volume
226  *                      Page 0.
227  *                      Added MPI_SAS_IOUNIT2_FLAGS_RESERVE_ID_0_FOR_BOOT
228  *                      define.
229  *  12-09-04  01.05.05  Added Target Mode Large CDB Enable to FC Port Page 1
230  *                      Flags field.
231  *                      Added Auto Port Config flag define for SAS IOUNIT
232  *                      Page 1 ControlFlags.
233  *                      Added Disabled bad Phy define to Expander Page 1
234  *                      Discovery Info field.
235  *                      Added SAS/SATA device support to SAS IOUnit Page 1
236  *                      ControlFlags.
237  *                      Added Unsupported device to SAS Dev Page 0 Flags field
238  *                      Added disable use SATA Hash Address for SAS IOUNIT
239  *                      page 1 in ControlFields.
240  *  01-15-05  01.05.06  Added defaults for data scrub rate and resync rate to
241  *                      Manufacturing Page 4.
242  *                      Added new defines for BIOS Page 1 IOCSettings field.
243  *                      Added ExtDiskIdentifier field to RAID Physical Disk
244  *                      Page 0.
245  *                      Added new defines for SAS IO Unit Page 1 ControlFlags
246  *                      and to SAS Device Page 0 Flags to control SATA devices.
247  *                      Added defines and structures for the new Log Page 0, a
248  *                      new type of configuration page.
249  *  02-09-05  01.05.07  Added InactiveStatus field to RAID Volume Page 0.
250  *                      Added WWID field to RAID Volume Page 1.
251  *                      Added PhysicalPort field to SAS Expander pages 0 and 1.
252  *  03-11-05  01.05.08  Removed the EEDP flags from IOC Page 1.
253  *                      Added Enclosure/Slot boot device format to BIOS Page 2.
254  *                      New status value for RAID Volume Page 0 VolumeStatus
255  *                      (VolumeState subfield).
256  *                      New value for RAID Physical Page 0 InactiveStatus.
257  *                      Added Inactive Volume Member flag RAID Physical Disk
258  *                      Page 0 PhysDiskStatus field.
259  *                      New physical mapping mode in SAS IO Unit Page 2.
260  *                      Added CONFIG_PAGE_SAS_ENCLOSURE_0.
261  *                      Added Slot and Enclosure fields to SAS Device Page 0.
262  *  06-24-05  01.05.09  Added EEDP defines to IOC Page 1.
263  *                      Added more RAID type defines to IOC Page 2.
264  *                      Added Port Enable Delay settings to BIOS Page 1.
265  *                      Added Bad Block Table Full define to RAID Volume Page 0.
266  *                      Added Previous State defines to RAID Physical Disk
267  *                      Page 0.
268  *                      Added Max Sata Targets define for DiscoveryStatus field
269  *                      of SAS IO Unit Page 0.
270  *                      Added Device Self Test to Control Flags of SAS IO Unit
271  *                      Page 1.
272  *                      Added Direct Attach Starting Slot Number define for SAS
273  *                      IO Unit Page 2.
274  *                      Added new fields in SAS Device Page 2 for enclosure
275  *                      mapping.
276  *                      Added OwnerDevHandle and Flags field to SAS PHY Page 0.
277  *                      Added IOC GPIO Flags define to SAS Enclosure Page 0.
278  *                      Fixed the value for MPI_SAS_IOUNIT1_CONTROL_DEV_SATA_SUPPORT.
279  *  08-03-05  01.05.10  Removed ISDataScrubRate and ISResyncRate from
280  *                      Manufacturing Page 4.
281  *                      Added MPI_IOUNITPAGE1_SATA_WRITE_CACHE_DISABLE bit.
282  *                      Added NumDevsPerEnclosure field to SAS IO Unit page 2.
283  *                      Added MPI_SAS_IOUNIT2_FLAGS_HOST_ASSIGNED_PHYS_MAP
284  *                      define.
285  *                      Added EnclosureHandle field to SAS Expander page 0.
286  *                      Removed redundant NumTableEntriesProg field from SAS
287  *                      Expander Page 1.
288  *  08-30-05  01.05.11  Added DeviceID for FC949E and changed the DeviceID for
289  *                      SAS1078.
290  *                      Added more defines for Manufacturing Page 4 Flags field.
291  *                      Added more defines for IOCSettings and added
292  *                      ExpanderSpinup field to Bios Page 1.
293  *                      Added postpone SATA Init bit to SAS IO Unit Page 1
294  *                      ControlFlags.
295  *                      Changed LogEntry format for Log Page 0.
296  *  03-27-06  01.05.12  Added two new Flags defines for Manufacturing Page 4.
297  *                      Added Manufacturing Page 7.
298  *                      Added MPI_IOCPAGE2_CAP_FLAGS_RAID_64_BIT_ADDRESSING.
299  *                      Added IOC Page 6.
300  *                      Added PrevBootDeviceForm field to CONFIG_PAGE_BIOS_2.
301  *                      Added MaxLBAHigh field to RAID Volume Page 0.
302  *                      Added Nvdata version fields to SAS IO Unit Page 0.
303  *                      Added AdditionalControlFlags, MaxTargetPortConnectTime,
304  *                      ReportDeviceMissingDelay, and IODeviceMissingDelay
305  *                      fields to SAS IO Unit Page 1.
306  *  10-11-06  01.05.13  Added NumForceWWID field and ForceWWID array to
307  *                      Manufacturing Page 5.
308  *                      Added Manufacturing pages 8 through 10.
309  *                      Added defines for supported metadata size bits in
310  *                      CapabilitiesFlags field of IOC Page 6.
311  *                      Added defines for metadata size bits in VolumeSettings
312  *                      field of RAID Volume Page 0.
313  *                      Added SATA Link Reset settings, Enable SATA Asynchronous
314  *                      Notification bit, and HideNonZeroAttachedPhyIdentifiers
315  *                      bit to AdditionalControlFlags field of SAS IO Unit
316  *                      Page 1.
317  *                      Added defines for Enclosure Devices Unmapped and
318  *                      Device Limit Exceeded bits in Status field of SAS IO
319  *                      Unit Page 2.
320  *                      Added more AccessStatus values for SAS Device Page 0.
321  *                      Added bit for SATA Asynchronous Notification Support in
322  *                      Flags field of SAS Device Page 0.
323  *  02-28-07  01.05.14  Added ExtFlags field to Manufacturing Page 4.
324  *                      Added Disable SMART Polling for CapabilitiesFlags of
325  *                      IOC Page 6.
326  *                      Added Disable SMART Polling to DeviceSettings of BIOS
327  *                      Page 1.
328  *                      Added Multi-Port Domain bit for DiscoveryStatus field
329  *                      of SAS IO Unit Page.
330  *                      Added Multi-Port Domain Illegal flag for SAS IO Unit
331  *                      Page 1 AdditionalControlFlags field.
332  *  05-24-07  01.05.15  Added Hide Physical Disks with Non-Integrated RAID
333  *                      Metadata bit to Manufacturing Page 4 ExtFlags field.
334  *                      Added Internal Connector to End Device Present bit to
335  *                      Expander Page 0 Flags field.
336  *                      Fixed define for
337  *                      MPI_SAS_EXPANDER1_DISCINFO_BAD_PHY_DISABLED.
338  *  --------------------------------------------------------------------------
339  */
340
341 #ifndef MPI_CNFG_H
342 #define MPI_CNFG_H
343
344
345 /*****************************************************************************
346 *
347 *       C o n f i g    M e s s a g e    a n d    S t r u c t u r e s
348 *
349 *****************************************************************************/
350
351 typedef struct _CONFIG_PAGE_HEADER
352 {
353     U8                      PageVersion;                /* 00h */
354     U8                      PageLength;                 /* 01h */
355     U8                      PageNumber;                 /* 02h */
356     U8                      PageType;                   /* 03h */
357 } CONFIG_PAGE_HEADER, MPI_POINTER PTR_CONFIG_PAGE_HEADER,
358   ConfigPageHeader_t, MPI_POINTER pConfigPageHeader_t;
359
360 typedef union _CONFIG_PAGE_HEADER_UNION
361 {
362    ConfigPageHeader_t  Struct;
363    U8                  Bytes[4];
364    U16                 Word16[2];
365    U32                 Word32;
366 } ConfigPageHeaderUnion, MPI_POINTER pConfigPageHeaderUnion,
367   CONFIG_PAGE_HEADER_UNION, MPI_POINTER PTR_CONFIG_PAGE_HEADER_UNION;
368
369 typedef struct _CONFIG_EXTENDED_PAGE_HEADER
370 {
371     U8                  PageVersion;                /* 00h */
372     U8                  Reserved1;                  /* 01h */
373     U8                  PageNumber;                 /* 02h */
374     U8                  PageType;                   /* 03h */
375     U16                 ExtPageLength;              /* 04h */
376     U8                  ExtPageType;                /* 06h */
377     U8                  Reserved2;                  /* 07h */
378 } CONFIG_EXTENDED_PAGE_HEADER, MPI_POINTER PTR_CONFIG_EXTENDED_PAGE_HEADER,
379   ConfigExtendedPageHeader_t, MPI_POINTER pConfigExtendedPageHeader_t;
380
381
382
383 /****************************************************************************
384 *   PageType field values
385 ****************************************************************************/
386 #define MPI_CONFIG_PAGEATTR_READ_ONLY               (0x00)
387 #define MPI_CONFIG_PAGEATTR_CHANGEABLE              (0x10)
388 #define MPI_CONFIG_PAGEATTR_PERSISTENT              (0x20)
389 #define MPI_CONFIG_PAGEATTR_RO_PERSISTENT           (0x30)
390 #define MPI_CONFIG_PAGEATTR_MASK                    (0xF0)
391
392 #define MPI_CONFIG_PAGETYPE_IO_UNIT                 (0x00)
393 #define MPI_CONFIG_PAGETYPE_IOC                     (0x01)
394 #define MPI_CONFIG_PAGETYPE_BIOS                    (0x02)
395 #define MPI_CONFIG_PAGETYPE_SCSI_PORT               (0x03)
396 #define MPI_CONFIG_PAGETYPE_SCSI_DEVICE             (0x04)
397 #define MPI_CONFIG_PAGETYPE_FC_PORT                 (0x05)
398 #define MPI_CONFIG_PAGETYPE_FC_DEVICE               (0x06)
399 #define MPI_CONFIG_PAGETYPE_LAN                     (0x07)
400 #define MPI_CONFIG_PAGETYPE_RAID_VOLUME             (0x08)
401 #define MPI_CONFIG_PAGETYPE_MANUFACTURING           (0x09)
402 #define MPI_CONFIG_PAGETYPE_RAID_PHYSDISK           (0x0A)
403 #define MPI_CONFIG_PAGETYPE_INBAND                  (0x0B)
404 #define MPI_CONFIG_PAGETYPE_EXTENDED                (0x0F)
405 #define MPI_CONFIG_PAGETYPE_MASK                    (0x0F)
406
407 #define MPI_CONFIG_TYPENUM_MASK                     (0x0FFF)
408
409
410 /****************************************************************************
411 *   ExtPageType field values
412 ****************************************************************************/
413 #define MPI_CONFIG_EXTPAGETYPE_SAS_IO_UNIT          (0x10)
414 #define MPI_CONFIG_EXTPAGETYPE_SAS_EXPANDER         (0x11)
415 #define MPI_CONFIG_EXTPAGETYPE_SAS_DEVICE           (0x12)
416 #define MPI_CONFIG_EXTPAGETYPE_SAS_PHY              (0x13)
417 #define MPI_CONFIG_EXTPAGETYPE_LOG                  (0x14)
418 #define MPI_CONFIG_EXTPAGETYPE_ENCLOSURE            (0x15)
419
420
421 /****************************************************************************
422 *   PageAddress field values
423 ****************************************************************************/
424 #define MPI_SCSI_PORT_PGAD_PORT_MASK                (0x000000FF)
425
426 #define MPI_SCSI_DEVICE_FORM_MASK                   (0xF0000000)
427 #define MPI_SCSI_DEVICE_FORM_BUS_TID                (0x00000000)
428 #define MPI_SCSI_DEVICE_TARGET_ID_MASK              (0x000000FF)
429 #define MPI_SCSI_DEVICE_TARGET_ID_SHIFT             (0)
430 #define MPI_SCSI_DEVICE_BUS_MASK                    (0x0000FF00)
431 #define MPI_SCSI_DEVICE_BUS_SHIFT                   (8)
432 #define MPI_SCSI_DEVICE_FORM_TARGET_MODE            (0x10000000)
433 #define MPI_SCSI_DEVICE_TM_RESPOND_ID_MASK          (0x000000FF)
434 #define MPI_SCSI_DEVICE_TM_RESPOND_ID_SHIFT         (0)
435 #define MPI_SCSI_DEVICE_TM_BUS_MASK                 (0x0000FF00)
436 #define MPI_SCSI_DEVICE_TM_BUS_SHIFT                (8)
437 #define MPI_SCSI_DEVICE_TM_INIT_ID_MASK             (0x00FF0000)
438 #define MPI_SCSI_DEVICE_TM_INIT_ID_SHIFT            (16)
439
440 #define MPI_FC_PORT_PGAD_PORT_MASK                  (0xF0000000)
441 #define MPI_FC_PORT_PGAD_PORT_SHIFT                 (28)
442 #define MPI_FC_PORT_PGAD_FORM_MASK                  (0x0F000000)
443 #define MPI_FC_PORT_PGAD_FORM_INDEX                 (0x01000000)
444 #define MPI_FC_PORT_PGAD_INDEX_MASK                 (0x0000FFFF)
445 #define MPI_FC_PORT_PGAD_INDEX_SHIFT                (0)
446
447 #define MPI_FC_DEVICE_PGAD_PORT_MASK                (0xF0000000)
448 #define MPI_FC_DEVICE_PGAD_PORT_SHIFT               (28)
449 #define MPI_FC_DEVICE_PGAD_FORM_MASK                (0x0F000000)
450 #define MPI_FC_DEVICE_PGAD_FORM_NEXT_DID            (0x00000000)
451 #define MPI_FC_DEVICE_PGAD_ND_PORT_MASK             (0xF0000000)
452 #define MPI_FC_DEVICE_PGAD_ND_PORT_SHIFT            (28)
453 #define MPI_FC_DEVICE_PGAD_ND_DID_MASK              (0x00FFFFFF)
454 #define MPI_FC_DEVICE_PGAD_ND_DID_SHIFT             (0)
455 #define MPI_FC_DEVICE_PGAD_FORM_BUS_TID             (0x01000000)
456 #define MPI_FC_DEVICE_PGAD_BT_BUS_MASK              (0x0000FF00)
457 #define MPI_FC_DEVICE_PGAD_BT_BUS_SHIFT             (8)
458 #define MPI_FC_DEVICE_PGAD_BT_TID_MASK              (0x000000FF)
459 #define MPI_FC_DEVICE_PGAD_BT_TID_SHIFT             (0)
460
461 #define MPI_PHYSDISK_PGAD_PHYSDISKNUM_MASK          (0x000000FF)
462 #define MPI_PHYSDISK_PGAD_PHYSDISKNUM_SHIFT         (0)
463
464 #define MPI_SAS_EXPAND_PGAD_FORM_MASK             (0xF0000000)
465 #define MPI_SAS_EXPAND_PGAD_FORM_SHIFT            (28)
466 #define MPI_SAS_EXPAND_PGAD_FORM_GET_NEXT_HANDLE  (0x00000000)
467 #define MPI_SAS_EXPAND_PGAD_FORM_HANDLE_PHY_NUM   (0x00000001)
468 #define MPI_SAS_EXPAND_PGAD_FORM_HANDLE           (0x00000002)
469 #define MPI_SAS_EXPAND_PGAD_GNH_MASK_HANDLE       (0x0000FFFF)
470 #define MPI_SAS_EXPAND_PGAD_GNH_SHIFT_HANDLE      (0)
471 #define MPI_SAS_EXPAND_PGAD_HPN_MASK_PHY          (0x00FF0000)
472 #define MPI_SAS_EXPAND_PGAD_HPN_SHIFT_PHY         (16)
473 #define MPI_SAS_EXPAND_PGAD_HPN_MASK_HANDLE       (0x0000FFFF)
474 #define MPI_SAS_EXPAND_PGAD_HPN_SHIFT_HANDLE      (0)
475 #define MPI_SAS_EXPAND_PGAD_H_MASK_HANDLE         (0x0000FFFF)
476 #define MPI_SAS_EXPAND_PGAD_H_SHIFT_HANDLE        (0)
477
478 #define MPI_SAS_DEVICE_PGAD_FORM_MASK               (0xF0000000)
479 #define MPI_SAS_DEVICE_PGAD_FORM_SHIFT              (28)
480 #define MPI_SAS_DEVICE_PGAD_FORM_GET_NEXT_HANDLE    (0x00000000)
481 #define MPI_SAS_DEVICE_PGAD_FORM_BUS_TARGET_ID      (0x00000001)
482 #define MPI_SAS_DEVICE_PGAD_FORM_HANDLE             (0x00000002)
483 #define MPI_SAS_DEVICE_PGAD_GNH_HANDLE_MASK         (0x0000FFFF)
484 #define MPI_SAS_DEVICE_PGAD_GNH_HANDLE_SHIFT        (0)
485 #define MPI_SAS_DEVICE_PGAD_BT_BUS_MASK             (0x0000FF00)
486 #define MPI_SAS_DEVICE_PGAD_BT_BUS_SHIFT            (8)
487 #define MPI_SAS_DEVICE_PGAD_BT_TID_MASK             (0x000000FF)
488 #define MPI_SAS_DEVICE_PGAD_BT_TID_SHIFT            (0)
489 #define MPI_SAS_DEVICE_PGAD_H_HANDLE_MASK           (0x0000FFFF)
490 #define MPI_SAS_DEVICE_PGAD_H_HANDLE_SHIFT          (0)
491
492 #define MPI_SAS_PHY_PGAD_FORM_MASK                  (0xF0000000)
493 #define MPI_SAS_PHY_PGAD_FORM_SHIFT                 (28)
494 #define MPI_SAS_PHY_PGAD_FORM_PHY_NUMBER            (0x0)
495 #define MPI_SAS_PHY_PGAD_FORM_PHY_TBL_INDEX         (0x1)
496 #define MPI_SAS_PHY_PGAD_PHY_NUMBER_MASK            (0x000000FF)
497 #define MPI_SAS_PHY_PGAD_PHY_NUMBER_SHIFT           (0)
498 #define MPI_SAS_PHY_PGAD_PHY_TBL_INDEX_MASK         (0x0000FFFF)
499 #define MPI_SAS_PHY_PGAD_PHY_TBL_INDEX_SHIFT        (0)
500
501 #define MPI_SAS_ENCLOS_PGAD_FORM_MASK               (0xF0000000)
502 #define MPI_SAS_ENCLOS_PGAD_FORM_SHIFT              (28)
503 #define MPI_SAS_ENCLOS_PGAD_FORM_GET_NEXT_HANDLE    (0x00000000)
504 #define MPI_SAS_ENCLOS_PGAD_FORM_HANDLE             (0x00000001)
505 #define MPI_SAS_ENCLOS_PGAD_GNH_HANDLE_MASK         (0x0000FFFF)
506 #define MPI_SAS_ENCLOS_PGAD_GNH_HANDLE_SHIFT        (0)
507 #define MPI_SAS_ENCLOS_PGAD_H_HANDLE_MASK           (0x0000FFFF)
508 #define MPI_SAS_ENCLOS_PGAD_H_HANDLE_SHIFT          (0)
509
510
511
512 /****************************************************************************
513 *   Config Request Message
514 ****************************************************************************/
515 typedef struct _MSG_CONFIG
516 {
517     U8                      Action;                     /* 00h */
518     U8                      Reserved;                   /* 01h */
519     U8                      ChainOffset;                /* 02h */
520     U8                      Function;                   /* 03h */
521     U16                     ExtPageLength;              /* 04h */
522     U8                      ExtPageType;                /* 06h */
523     U8                      MsgFlags;                   /* 07h */
524     U32                     MsgContext;                 /* 08h */
525     U8                      Reserved2[8];               /* 0Ch */
526     CONFIG_PAGE_HEADER      Header;                     /* 14h */
527     U32                     PageAddress;                /* 18h */
528     SGE_IO_UNION            PageBufferSGE;              /* 1Ch */
529 } MSG_CONFIG, MPI_POINTER PTR_MSG_CONFIG,
530   Config_t, MPI_POINTER pConfig_t;
531
532
533 /****************************************************************************
534 *   Action field values
535 ****************************************************************************/
536 #define MPI_CONFIG_ACTION_PAGE_HEADER               (0x00)
537 #define MPI_CONFIG_ACTION_PAGE_READ_CURRENT         (0x01)
538 #define MPI_CONFIG_ACTION_PAGE_WRITE_CURRENT        (0x02)
539 #define MPI_CONFIG_ACTION_PAGE_DEFAULT              (0x03)
540 #define MPI_CONFIG_ACTION_PAGE_WRITE_NVRAM          (0x04)
541 #define MPI_CONFIG_ACTION_PAGE_READ_DEFAULT         (0x05)
542 #define MPI_CONFIG_ACTION_PAGE_READ_NVRAM           (0x06)
543
544
545 /* Config Reply Message */
546 typedef struct _MSG_CONFIG_REPLY
547 {
548     U8                      Action;                     /* 00h */
549     U8                      Reserved;                   /* 01h */
550     U8                      MsgLength;                  /* 02h */
551     U8                      Function;                   /* 03h */
552     U16                     ExtPageLength;              /* 04h */
553     U8                      ExtPageType;                /* 06h */
554     U8                      MsgFlags;                   /* 07h */
555     U32                     MsgContext;                 /* 08h */
556     U8                      Reserved2[2];               /* 0Ch */
557     U16                     IOCStatus;                  /* 0Eh */
558     U32                     IOCLogInfo;                 /* 10h */
559     CONFIG_PAGE_HEADER      Header;                     /* 14h */
560 } MSG_CONFIG_REPLY, MPI_POINTER PTR_MSG_CONFIG_REPLY,
561   ConfigReply_t, MPI_POINTER pConfigReply_t;
562
563
564
565 /*****************************************************************************
566 *
567 *               C o n f i g u r a t i o n    P a g e s
568 *
569 *****************************************************************************/
570
571 /****************************************************************************
572 *   Manufacturing Config pages
573 ****************************************************************************/
574 #define MPI_MANUFACTPAGE_VENDORID_LSILOGIC          (0x1000)
575 /* Fibre Channel */
576 #define MPI_MANUFACTPAGE_DEVICEID_FC909             (0x0621)
577 #define MPI_MANUFACTPAGE_DEVICEID_FC919             (0x0624)
578 #define MPI_MANUFACTPAGE_DEVICEID_FC929             (0x0622)
579 #define MPI_MANUFACTPAGE_DEVICEID_FC919X            (0x0628)
580 #define MPI_MANUFACTPAGE_DEVICEID_FC929X            (0x0626)
581 #define MPI_MANUFACTPAGE_DEVICEID_FC939X            (0x0642)
582 #define MPI_MANUFACTPAGE_DEVICEID_FC949X            (0x0640)
583 #define MPI_MANUFACTPAGE_DEVICEID_FC949E            (0x0646)
584 /* SCSI */
585 #define MPI_MANUFACTPAGE_DEVID_53C1030              (0x0030)
586 #define MPI_MANUFACTPAGE_DEVID_53C1030ZC            (0x0031)
587 #define MPI_MANUFACTPAGE_DEVID_1030_53C1035         (0x0032)
588 #define MPI_MANUFACTPAGE_DEVID_1030ZC_53C1035       (0x0033)
589 #define MPI_MANUFACTPAGE_DEVID_53C1035              (0x0040)
590 #define MPI_MANUFACTPAGE_DEVID_53C1035ZC            (0x0041)
591 /* SAS */
592 #define MPI_MANUFACTPAGE_DEVID_SAS1064              (0x0050)
593 #define MPI_MANUFACTPAGE_DEVID_SAS1064A             (0x005C)
594 #define MPI_MANUFACTPAGE_DEVID_SAS1064E             (0x0056)
595 #define MPI_MANUFACTPAGE_DEVID_SAS1066              (0x005E)
596 #define MPI_MANUFACTPAGE_DEVID_SAS1066E             (0x005A)
597 #define MPI_MANUFACTPAGE_DEVID_SAS1068              (0x0054)
598 #define MPI_MANUFACTPAGE_DEVID_SAS1068E             (0x0058)
599 #define MPI_MANUFACTPAGE_DEVID_SAS1078              (0x0062)
600
601
602 typedef struct _CONFIG_PAGE_MANUFACTURING_0
603 {
604     CONFIG_PAGE_HEADER      Header;                     /* 00h */
605     U8                      ChipName[16];               /* 04h */
606     U8                      ChipRevision[8];            /* 14h */
607     U8                      BoardName[16];              /* 1Ch */
608     U8                      BoardAssembly[16];          /* 2Ch */
609     U8                      BoardTracerNumber[16];      /* 3Ch */
610
611 } CONFIG_PAGE_MANUFACTURING_0, MPI_POINTER PTR_CONFIG_PAGE_MANUFACTURING_0,
612   ManufacturingPage0_t, MPI_POINTER pManufacturingPage0_t;
613
614 #define MPI_MANUFACTURING0_PAGEVERSION                 (0x00)
615
616
617 typedef struct _CONFIG_PAGE_MANUFACTURING_1
618 {
619     CONFIG_PAGE_HEADER      Header;                     /* 00h */
620     U8                      VPD[256];                   /* 04h */
621 } CONFIG_PAGE_MANUFACTURING_1, MPI_POINTER PTR_CONFIG_PAGE_MANUFACTURING_1,
622   ManufacturingPage1_t, MPI_POINTER pManufacturingPage1_t;
623
624 #define MPI_MANUFACTURING1_PAGEVERSION                 (0x00)
625
626
627 typedef struct _MPI_CHIP_REVISION_ID
628 {
629     U16 DeviceID;                                       /* 00h */
630     U8  PCIRevisionID;                                  /* 02h */
631     U8  Reserved;                                       /* 03h */
632 } MPI_CHIP_REVISION_ID, MPI_POINTER PTR_MPI_CHIP_REVISION_ID,
633   MpiChipRevisionId_t, MPI_POINTER pMpiChipRevisionId_t;
634
635
636 /*
637  * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
638  * one and check Header.PageLength at runtime.
639  */
640 #ifndef MPI_MAN_PAGE_2_HW_SETTINGS_WORDS
641 #define MPI_MAN_PAGE_2_HW_SETTINGS_WORDS    (1)
642 #endif
643
644 typedef struct _CONFIG_PAGE_MANUFACTURING_2
645 {
646     CONFIG_PAGE_HEADER      Header;                                 /* 00h */
647     MPI_CHIP_REVISION_ID    ChipId;                                 /* 04h */
648     U32                     HwSettings[MPI_MAN_PAGE_2_HW_SETTINGS_WORDS];/* 08h */
649 } CONFIG_PAGE_MANUFACTURING_2, MPI_POINTER PTR_CONFIG_PAGE_MANUFACTURING_2,
650   ManufacturingPage2_t, MPI_POINTER pManufacturingPage2_t;
651
652 #define MPI_MANUFACTURING2_PAGEVERSION                  (0x00)
653
654
655 /*
656  * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
657  * one and check Header.PageLength at runtime.
658  */
659 #ifndef MPI_MAN_PAGE_3_INFO_WORDS
660 #define MPI_MAN_PAGE_3_INFO_WORDS           (1)
661 #endif
662
663 typedef struct _CONFIG_PAGE_MANUFACTURING_3
664 {
665     CONFIG_PAGE_HEADER                  Header;                     /* 00h */
666     MPI_CHIP_REVISION_ID                ChipId;                     /* 04h */
667     U32                                 Info[MPI_MAN_PAGE_3_INFO_WORDS];/* 08h */
668 } CONFIG_PAGE_MANUFACTURING_3, MPI_POINTER PTR_CONFIG_PAGE_MANUFACTURING_3,
669   ManufacturingPage3_t, MPI_POINTER pManufacturingPage3_t;
670
671 #define MPI_MANUFACTURING3_PAGEVERSION                  (0x00)
672
673
674 typedef struct _CONFIG_PAGE_MANUFACTURING_4
675 {
676     CONFIG_PAGE_HEADER              Header;             /* 00h */
677     U32                             Reserved1;          /* 04h */
678     U8                              InfoOffset0;        /* 08h */
679     U8                              InfoSize0;          /* 09h */
680     U8                              InfoOffset1;        /* 0Ah */
681     U8                              InfoSize1;          /* 0Bh */
682     U8                              InquirySize;        /* 0Ch */
683     U8                              Flags;              /* 0Dh */
684     U16                             ExtFlags;           /* 0Eh */
685     U8                              InquiryData[56];    /* 10h */
686     U32                             ISVolumeSettings;   /* 48h */
687     U32                             IMEVolumeSettings;  /* 4Ch */
688     U32                             IMVolumeSettings;   /* 50h */
689     U32                             Reserved3;          /* 54h */
690     U32                             Reserved4;          /* 58h */
691     U32                             Reserved5;          /* 5Ch */
692     U8                              IMEDataScrubRate;   /* 60h */
693     U8                              IMEResyncRate;      /* 61h */
694     U16                             Reserved6;          /* 62h */
695     U8                              IMDataScrubRate;    /* 64h */
696     U8                              IMResyncRate;       /* 65h */
697     U16                             Reserved7;          /* 66h */
698     U32                             Reserved8;          /* 68h */
699     U32                             Reserved9;          /* 6Ch */
700 } CONFIG_PAGE_MANUFACTURING_4, MPI_POINTER PTR_CONFIG_PAGE_MANUFACTURING_4,
701   ManufacturingPage4_t, MPI_POINTER pManufacturingPage4_t;
702
703 #define MPI_MANUFACTURING4_PAGEVERSION                  (0x05)
704
705 /* defines for the Flags field */
706 #define MPI_MANPAGE4_FORCE_BAD_BLOCK_TABLE              (0x80)
707 #define MPI_MANPAGE4_FORCE_OFFLINE_FAILOVER             (0x40)
708 #define MPI_MANPAGE4_IME_DISABLE                        (0x20)
709 #define MPI_MANPAGE4_IM_DISABLE                         (0x10)
710 #define MPI_MANPAGE4_IS_DISABLE                         (0x08)
711 #define MPI_MANPAGE4_IR_MODEPAGE8_DISABLE               (0x04)
712 #define MPI_MANPAGE4_IM_RESYNC_CACHE_ENABLE             (0x02)
713 #define MPI_MANPAGE4_IR_NO_MIX_SAS_SATA                 (0x01)
714
715 /* defines for the ExtFlags field */
716 #define MPI_MANPAGE4_EXTFLAGS_HIDE_NON_IR_METADATA      (0x0008)
717 #define MPI_MANPAGE4_EXTFLAGS_SAS_CACHE_DISABLE         (0x0004)
718 #define MPI_MANPAGE4_EXTFLAGS_SATA_CACHE_DISABLE        (0x0002)
719 #define MPI_MANPAGE4_EXTFLAGS_LEGACY_MODE               (0x0001)
720
721
722 #ifndef MPI_MANPAGE5_NUM_FORCEWWID
723 #define MPI_MANPAGE5_NUM_FORCEWWID      (1)
724 #endif
725
726 typedef struct _CONFIG_PAGE_MANUFACTURING_5
727 {
728     CONFIG_PAGE_HEADER              Header;             /* 00h */
729     U64                             BaseWWID;           /* 04h */
730     U8                              Flags;              /* 0Ch */
731     U8                              NumForceWWID;       /* 0Dh */
732     U16                             Reserved2;          /* 0Eh */
733     U32                             Reserved3;          /* 10h */
734     U32                             Reserved4;          /* 14h */
735     U64                             ForceWWID[MPI_MANPAGE5_NUM_FORCEWWID]; /* 18h */
736 } CONFIG_PAGE_MANUFACTURING_5, MPI_POINTER PTR_CONFIG_PAGE_MANUFACTURING_5,
737   ManufacturingPage5_t, MPI_POINTER pManufacturingPage5_t;
738
739 #define MPI_MANUFACTURING5_PAGEVERSION                  (0x02)
740
741 /* defines for the Flags field */
742 #define MPI_MANPAGE5_TWO_WWID_PER_PHY                   (0x01)
743
744
745 typedef struct _CONFIG_PAGE_MANUFACTURING_6
746 {
747     CONFIG_PAGE_HEADER              Header;             /* 00h */
748     U32                             ProductSpecificInfo;/* 04h */
749 } CONFIG_PAGE_MANUFACTURING_6, MPI_POINTER PTR_CONFIG_PAGE_MANUFACTURING_6,
750   ManufacturingPage6_t, MPI_POINTER pManufacturingPage6_t;
751
752 #define MPI_MANUFACTURING6_PAGEVERSION                  (0x00)
753
754
755 typedef struct _MPI_MANPAGE7_CONNECTOR_INFO
756 {
757     U32                         Pinout;                 /* 00h */
758     U8                          Connector[16];          /* 04h */
759     U8                          Location;               /* 14h */
760     U8                          Reserved1;              /* 15h */
761     U16                         Slot;                   /* 16h */
762     U32                         Reserved2;              /* 18h */
763 } MPI_MANPAGE7_CONNECTOR_INFO, MPI_POINTER PTR_MPI_MANPAGE7_CONNECTOR_INFO,
764   MpiManPage7ConnectorInfo_t, MPI_POINTER pMpiManPage7ConnectorInfo_t;
765
766 /* defines for the Pinout field */
767 #define MPI_MANPAGE7_PINOUT_SFF_8484_L4                 (0x00080000)
768 #define MPI_MANPAGE7_PINOUT_SFF_8484_L3                 (0x00040000)
769 #define MPI_MANPAGE7_PINOUT_SFF_8484_L2                 (0x00020000)
770 #define MPI_MANPAGE7_PINOUT_SFF_8484_L1                 (0x00010000)
771 #define MPI_MANPAGE7_PINOUT_SFF_8470_L4                 (0x00000800)
772 #define MPI_MANPAGE7_PINOUT_SFF_8470_L3                 (0x00000400)
773 #define MPI_MANPAGE7_PINOUT_SFF_8470_L2                 (0x00000200)
774 #define MPI_MANPAGE7_PINOUT_SFF_8470_L1                 (0x00000100)
775 #define MPI_MANPAGE7_PINOUT_SFF_8482                    (0x00000002)
776 #define MPI_MANPAGE7_PINOUT_CONNECTION_UNKNOWN          (0x00000001)
777
778 /* defines for the Location field */
779 #define MPI_MANPAGE7_LOCATION_UNKNOWN                   (0x01)
780 #define MPI_MANPAGE7_LOCATION_INTERNAL                  (0x02)
781 #define MPI_MANPAGE7_LOCATION_EXTERNAL                  (0x04)
782 #define MPI_MANPAGE7_LOCATION_SWITCHABLE                (0x08)
783 #define MPI_MANPAGE7_LOCATION_AUTO                      (0x10)
784 #define MPI_MANPAGE7_LOCATION_NOT_PRESENT               (0x20)
785 #define MPI_MANPAGE7_LOCATION_NOT_CONNECTED             (0x80)
786
787 /*
788  * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
789  * one and check NumPhys at runtime.
790  */
791 #ifndef MPI_MANPAGE7_CONNECTOR_INFO_MAX
792 #define MPI_MANPAGE7_CONNECTOR_INFO_MAX   (1)
793 #endif
794
795 typedef struct _CONFIG_PAGE_MANUFACTURING_7
796 {
797     CONFIG_PAGE_HEADER          Header;                 /* 00h */
798     U32                         Reserved1;              /* 04h */
799     U32                         Reserved2;              /* 08h */
800     U32                         Flags;                  /* 0Ch */
801     U8                          EnclosureName[16];      /* 10h */
802     U8                          NumPhys;                /* 20h */
803     U8                          Reserved3;              /* 21h */
804     U16                         Reserved4;              /* 22h */
805     MPI_MANPAGE7_CONNECTOR_INFO ConnectorInfo[MPI_MANPAGE7_CONNECTOR_INFO_MAX]; /* 24h */
806 } CONFIG_PAGE_MANUFACTURING_7, MPI_POINTER PTR_CONFIG_PAGE_MANUFACTURING_7,
807   ManufacturingPage7_t, MPI_POINTER pManufacturingPage7_t;
808
809 #define MPI_MANUFACTURING7_PAGEVERSION                  (0x00)
810
811 /* defines for the Flags field */
812 #define MPI_MANPAGE7_FLAG_USE_SLOT_INFO                 (0x00000001)
813
814
815 typedef struct _CONFIG_PAGE_MANUFACTURING_8
816 {
817     CONFIG_PAGE_HEADER              Header;             /* 00h */
818     U32                             ProductSpecificInfo;/* 04h */
819 } CONFIG_PAGE_MANUFACTURING_8, MPI_POINTER PTR_CONFIG_PAGE_MANUFACTURING_8,
820   ManufacturingPage8_t, MPI_POINTER pManufacturingPage8_t;
821
822 #define MPI_MANUFACTURING8_PAGEVERSION                  (0x00)
823
824
825 typedef struct _CONFIG_PAGE_MANUFACTURING_9
826 {
827     CONFIG_PAGE_HEADER              Header;             /* 00h */
828     U32                             ProductSpecificInfo;/* 04h */
829 } CONFIG_PAGE_MANUFACTURING_9, MPI_POINTER PTR_CONFIG_PAGE_MANUFACTURING_9,
830   ManufacturingPage9_t, MPI_POINTER pManufacturingPage9_t;
831
832 #define MPI_MANUFACTURING9_PAGEVERSION                  (0x00)
833
834
835 typedef struct _CONFIG_PAGE_MANUFACTURING_10
836 {
837     CONFIG_PAGE_HEADER              Header;             /* 00h */
838     U32                             ProductSpecificInfo;/* 04h */
839 } CONFIG_PAGE_MANUFACTURING_10, MPI_POINTER PTR_CONFIG_PAGE_MANUFACTURING_10,
840   ManufacturingPage10_t, MPI_POINTER pManufacturingPage10_t;
841
842 #define MPI_MANUFACTURING10_PAGEVERSION                 (0x00)
843
844
845 /****************************************************************************
846 *   IO Unit Config Pages
847 ****************************************************************************/
848
849 typedef struct _CONFIG_PAGE_IO_UNIT_0
850 {
851     CONFIG_PAGE_HEADER      Header;                     /* 00h */
852     U64                     UniqueValue;                /* 04h */
853 } CONFIG_PAGE_IO_UNIT_0, MPI_POINTER PTR_CONFIG_PAGE_IO_UNIT_0,
854   IOUnitPage0_t, MPI_POINTER pIOUnitPage0_t;
855
856 #define MPI_IOUNITPAGE0_PAGEVERSION                     (0x00)
857
858
859 typedef struct _CONFIG_PAGE_IO_UNIT_1
860 {
861     CONFIG_PAGE_HEADER      Header;                     /* 00h */
862     U32                     Flags;                      /* 04h */
863 } CONFIG_PAGE_IO_UNIT_1, MPI_POINTER PTR_CONFIG_PAGE_IO_UNIT_1,
864   IOUnitPage1_t, MPI_POINTER pIOUnitPage1_t;
865
866 #define MPI_IOUNITPAGE1_PAGEVERSION                     (0x02)
867
868 /* IO Unit Page 1 Flags defines */
869 #define MPI_IOUNITPAGE1_MULTI_FUNCTION                  (0x00000000)
870 #define MPI_IOUNITPAGE1_SINGLE_FUNCTION                 (0x00000001)
871 #define MPI_IOUNITPAGE1_MULTI_PATHING                   (0x00000002)
872 #define MPI_IOUNITPAGE1_SINGLE_PATHING                  (0x00000000)
873 #define MPI_IOUNITPAGE1_IR_USE_STATIC_VOLUME_ID         (0x00000004)
874 #define MPI_IOUNITPAGE1_DISABLE_QUEUE_FULL_HANDLING     (0x00000020)
875 #define MPI_IOUNITPAGE1_DISABLE_IR                      (0x00000040)
876 #define MPI_IOUNITPAGE1_FORCE_32                        (0x00000080)
877 #define MPI_IOUNITPAGE1_NATIVE_COMMAND_Q_DISABLE        (0x00000100)
878 #define MPI_IOUNITPAGE1_SATA_WRITE_CACHE_DISABLE        (0x00000200)
879
880 typedef struct _MPI_ADAPTER_INFO
881 {
882     U8      PciBusNumber;                               /* 00h */
883     U8      PciDeviceAndFunctionNumber;                 /* 01h */
884     U16     AdapterFlags;                               /* 02h */
885 } MPI_ADAPTER_INFO, MPI_POINTER PTR_MPI_ADAPTER_INFO,
886   MpiAdapterInfo_t, MPI_POINTER pMpiAdapterInfo_t;
887
888 #define MPI_ADAPTER_INFO_FLAGS_EMBEDDED                 (0x0001)
889 #define MPI_ADAPTER_INFO_FLAGS_INIT_STATUS              (0x0002)
890
891 typedef struct _CONFIG_PAGE_IO_UNIT_2
892 {
893     CONFIG_PAGE_HEADER      Header;                     /* 00h */
894     U32                     Flags;                      /* 04h */
895     U32                     BiosVersion;                /* 08h */
896     MPI_ADAPTER_INFO        AdapterOrder[4];            /* 0Ch */
897     U32                     Reserved1;                  /* 1Ch */
898 } CONFIG_PAGE_IO_UNIT_2, MPI_POINTER PTR_CONFIG_PAGE_IO_UNIT_2,
899   IOUnitPage2_t, MPI_POINTER pIOUnitPage2_t;
900
901 #define MPI_IOUNITPAGE2_PAGEVERSION                     (0x02)
902
903 #define MPI_IOUNITPAGE2_FLAGS_PAUSE_ON_ERROR            (0x00000002)
904 #define MPI_IOUNITPAGE2_FLAGS_VERBOSE_ENABLE            (0x00000004)
905 #define MPI_IOUNITPAGE2_FLAGS_COLOR_VIDEO_DISABLE       (0x00000008)
906 #define MPI_IOUNITPAGE2_FLAGS_DONT_HOOK_INT_40          (0x00000010)
907
908 #define MPI_IOUNITPAGE2_FLAGS_DEV_LIST_DISPLAY_MASK     (0x000000E0)
909 #define MPI_IOUNITPAGE2_FLAGS_INSTALLED_DEV_DISPLAY     (0x00000000)
910 #define MPI_IOUNITPAGE2_FLAGS_ADAPTER_DISPLAY           (0x00000020)
911 #define MPI_IOUNITPAGE2_FLAGS_ADAPTER_DEV_DISPLAY       (0x00000040)
912
913
914 /*
915  * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
916  * one and check Header.PageLength at runtime.
917  */
918 #ifndef MPI_IO_UNIT_PAGE_3_GPIO_VAL_MAX
919 #define MPI_IO_UNIT_PAGE_3_GPIO_VAL_MAX     (1)
920 #endif
921
922 typedef struct _CONFIG_PAGE_IO_UNIT_3
923 {
924     CONFIG_PAGE_HEADER      Header;                                   /* 00h */
925     U8                      GPIOCount;                                /* 04h */
926     U8                      Reserved1;                                /* 05h */
927     U16                     Reserved2;                                /* 06h */
928     U16                     GPIOVal[MPI_IO_UNIT_PAGE_3_GPIO_VAL_MAX]; /* 08h */
929 } CONFIG_PAGE_IO_UNIT_3, MPI_POINTER PTR_CONFIG_PAGE_IO_UNIT_3,
930   IOUnitPage3_t, MPI_POINTER pIOUnitPage3_t;
931
932 #define MPI_IOUNITPAGE3_PAGEVERSION                     (0x01)
933
934 #define MPI_IOUNITPAGE3_GPIO_FUNCTION_MASK              (0xFC)
935 #define MPI_IOUNITPAGE3_GPIO_FUNCTION_SHIFT             (2)
936 #define MPI_IOUNITPAGE3_GPIO_SETTING_OFF                (0x00)
937 #define MPI_IOUNITPAGE3_GPIO_SETTING_ON                 (0x01)
938
939
940 typedef struct _CONFIG_PAGE_IO_UNIT_4
941 {
942     CONFIG_PAGE_HEADER      Header;                                   /* 00h */
943     U32                     Reserved1;                                /* 04h */
944     SGE_SIMPLE_UNION        FWImageSGE;                               /* 08h */
945 } CONFIG_PAGE_IO_UNIT_4, MPI_POINTER PTR_CONFIG_PAGE_IO_UNIT_4,
946   IOUnitPage4_t, MPI_POINTER pIOUnitPage4_t;
947
948 #define MPI_IOUNITPAGE4_PAGEVERSION                     (0x00)
949
950
951 /****************************************************************************
952 *   IOC Config Pages
953 ****************************************************************************/
954
955 typedef struct _CONFIG_PAGE_IOC_0
956 {
957     CONFIG_PAGE_HEADER      Header;                     /* 00h */
958     U32                     TotalNVStore;               /* 04h */
959     U32                     FreeNVStore;                /* 08h */
960     U16                     VendorID;                   /* 0Ch */
961     U16                     DeviceID;                   /* 0Eh */
962     U8                      RevisionID;                 /* 10h */
963     U8                      Reserved[3];                /* 11h */
964     U32                     ClassCode;                  /* 14h */
965     U16                     SubsystemVendorID;          /* 18h */
966     U16                     SubsystemID;                /* 1Ah */
967 } CONFIG_PAGE_IOC_0, MPI_POINTER PTR_CONFIG_PAGE_IOC_0,
968   IOCPage0_t, MPI_POINTER pIOCPage0_t;
969
970 #define MPI_IOCPAGE0_PAGEVERSION                        (0x01)
971
972
973 typedef struct _CONFIG_PAGE_IOC_1
974 {
975     CONFIG_PAGE_HEADER      Header;                     /* 00h */
976     U32                     Flags;                      /* 04h */
977     U32                     CoalescingTimeout;          /* 08h */
978     U8                      CoalescingDepth;            /* 0Ch */
979     U8                      PCISlotNum;                 /* 0Dh */
980     U8                      Reserved[2];                /* 0Eh */
981 } CONFIG_PAGE_IOC_1, MPI_POINTER PTR_CONFIG_PAGE_IOC_1,
982   IOCPage1_t, MPI_POINTER pIOCPage1_t;
983
984 #define MPI_IOCPAGE1_PAGEVERSION                        (0x03)
985
986 /* defines for the Flags field */
987 #define MPI_IOCPAGE1_EEDP_MODE_MASK                     (0x07000000)
988 #define MPI_IOCPAGE1_EEDP_MODE_OFF                      (0x00000000)
989 #define MPI_IOCPAGE1_EEDP_MODE_T10                      (0x01000000)
990 #define MPI_IOCPAGE1_EEDP_MODE_LSI_1                    (0x02000000)
991 #define MPI_IOCPAGE1_INITIATOR_CONTEXT_REPLY_DISABLE    (0x00000010)
992 #define MPI_IOCPAGE1_REPLY_COALESCING                   (0x00000001)
993
994 #define MPI_IOCPAGE1_PCISLOTNUM_UNKNOWN                 (0xFF)
995
996
997 typedef struct _CONFIG_PAGE_IOC_2_RAID_VOL
998 {
999     U8                          VolumeID;               /* 00h */
1000     U8                          VolumeBus;              /* 01h */
1001     U8                          VolumeIOC;              /* 02h */
1002     U8                          VolumePageNumber;       /* 03h */
1003     U8                          VolumeType;             /* 04h */
1004     U8                          Flags;                  /* 05h */
1005     U16                         Reserved3;              /* 06h */
1006 } CONFIG_PAGE_IOC_2_RAID_VOL, MPI_POINTER PTR_CONFIG_PAGE_IOC_2_RAID_VOL,
1007   ConfigPageIoc2RaidVol_t, MPI_POINTER pConfigPageIoc2RaidVol_t;
1008
1009 /* IOC Page 2 Volume RAID Type values, also used in RAID Volume pages */
1010
1011 #define MPI_RAID_VOL_TYPE_IS                        (0x00)
1012 #define MPI_RAID_VOL_TYPE_IME                       (0x01)
1013 #define MPI_RAID_VOL_TYPE_IM                        (0x02)
1014 #define MPI_RAID_VOL_TYPE_RAID_5                    (0x03)
1015 #define MPI_RAID_VOL_TYPE_RAID_6                    (0x04)
1016 #define MPI_RAID_VOL_TYPE_RAID_10                   (0x05)
1017 #define MPI_RAID_VOL_TYPE_RAID_50                   (0x06)
1018 #define MPI_RAID_VOL_TYPE_UNKNOWN                   (0xFF)
1019
1020 /* IOC Page 2 Volume Flags values */
1021
1022 #define MPI_IOCPAGE2_FLAG_VOLUME_INACTIVE           (0x08)
1023
1024 /*
1025  * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
1026  * one and check Header.PageLength at runtime.
1027  */
1028 #ifndef MPI_IOC_PAGE_2_RAID_VOLUME_MAX
1029 #define MPI_IOC_PAGE_2_RAID_VOLUME_MAX      (1)
1030 #endif
1031
1032 typedef struct _CONFIG_PAGE_IOC_2
1033 {
1034     CONFIG_PAGE_HEADER          Header;                              /* 00h */
1035     U32                         CapabilitiesFlags;                   /* 04h */
1036     U8                          NumActiveVolumes;                    /* 08h */
1037     U8                          MaxVolumes;                          /* 09h */
1038     U8                          NumActivePhysDisks;                  /* 0Ah */
1039     U8                          MaxPhysDisks;                        /* 0Bh */
1040     CONFIG_PAGE_IOC_2_RAID_VOL  RaidVolume[MPI_IOC_PAGE_2_RAID_VOLUME_MAX];/* 0Ch */
1041 } CONFIG_PAGE_IOC_2, MPI_POINTER PTR_CONFIG_PAGE_IOC_2,
1042   IOCPage2_t, MPI_POINTER pIOCPage2_t;
1043
1044 #define MPI_IOCPAGE2_PAGEVERSION                        (0x04)
1045
1046 /* IOC Page 2 Capabilities flags */
1047
1048 #define MPI_IOCPAGE2_CAP_FLAGS_IS_SUPPORT               (0x00000001)
1049 #define MPI_IOCPAGE2_CAP_FLAGS_IME_SUPPORT              (0x00000002)
1050 #define MPI_IOCPAGE2_CAP_FLAGS_IM_SUPPORT               (0x00000004)
1051 #define MPI_IOCPAGE2_CAP_FLAGS_RAID_5_SUPPORT           (0x00000008)
1052 #define MPI_IOCPAGE2_CAP_FLAGS_RAID_6_SUPPORT           (0x00000010)
1053 #define MPI_IOCPAGE2_CAP_FLAGS_RAID_10_SUPPORT          (0x00000020)
1054 #define MPI_IOCPAGE2_CAP_FLAGS_RAID_50_SUPPORT          (0x00000040)
1055 #define MPI_IOCPAGE2_CAP_FLAGS_RAID_64_BIT_ADDRESSING   (0x10000000)
1056 #define MPI_IOCPAGE2_CAP_FLAGS_SES_SUPPORT              (0x20000000)
1057 #define MPI_IOCPAGE2_CAP_FLAGS_SAFTE_SUPPORT            (0x40000000)
1058 #define MPI_IOCPAGE2_CAP_FLAGS_CROSS_CHANNEL_SUPPORT    (0x80000000)
1059
1060
1061 typedef struct _IOC_3_PHYS_DISK
1062 {
1063     U8                          PhysDiskID;             /* 00h */
1064     U8                          PhysDiskBus;            /* 01h */
1065     U8                          PhysDiskIOC;            /* 02h */
1066     U8                          PhysDiskNum;            /* 03h */
1067 } IOC_3_PHYS_DISK, MPI_POINTER PTR_IOC_3_PHYS_DISK,
1068   Ioc3PhysDisk_t, MPI_POINTER pIoc3PhysDisk_t;
1069
1070 /*
1071  * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
1072  * one and check Header.PageLength at runtime.
1073  */
1074 #ifndef MPI_IOC_PAGE_3_PHYSDISK_MAX
1075 #define MPI_IOC_PAGE_3_PHYSDISK_MAX         (1)
1076 #endif
1077
1078 typedef struct _CONFIG_PAGE_IOC_3
1079 {
1080     CONFIG_PAGE_HEADER          Header;                                /* 00h */
1081     U8                          NumPhysDisks;                          /* 04h */
1082     U8                          Reserved1;                             /* 05h */
1083     U16                         Reserved2;                             /* 06h */
1084     IOC_3_PHYS_DISK             PhysDisk[MPI_IOC_PAGE_3_PHYSDISK_MAX]; /* 08h */
1085 } CONFIG_PAGE_IOC_3, MPI_POINTER PTR_CONFIG_PAGE_IOC_3,
1086   IOCPage3_t, MPI_POINTER pIOCPage3_t;
1087
1088 #define MPI_IOCPAGE3_PAGEVERSION                        (0x00)
1089
1090
1091 typedef struct _IOC_4_SEP
1092 {
1093     U8                          SEPTargetID;            /* 00h */
1094     U8                          SEPBus;                 /* 01h */
1095     U16                         Reserved;               /* 02h */
1096 } IOC_4_SEP, MPI_POINTER PTR_IOC_4_SEP,
1097   Ioc4Sep_t, MPI_POINTER pIoc4Sep_t;
1098
1099 /*
1100  * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
1101  * one and check Header.PageLength at runtime.
1102  */
1103 #ifndef MPI_IOC_PAGE_4_SEP_MAX
1104 #define MPI_IOC_PAGE_4_SEP_MAX              (1)
1105 #endif
1106
1107 typedef struct _CONFIG_PAGE_IOC_4
1108 {
1109     CONFIG_PAGE_HEADER          Header;                         /* 00h */
1110     U8                          ActiveSEP;                      /* 04h */
1111     U8                          MaxSEP;                         /* 05h */
1112     U16                         Reserved1;                      /* 06h */
1113     IOC_4_SEP                   SEP[MPI_IOC_PAGE_4_SEP_MAX];    /* 08h */
1114 } CONFIG_PAGE_IOC_4, MPI_POINTER PTR_CONFIG_PAGE_IOC_4,
1115   IOCPage4_t, MPI_POINTER pIOCPage4_t;
1116
1117 #define MPI_IOCPAGE4_PAGEVERSION                        (0x00)
1118
1119
1120 typedef struct _IOC_5_HOT_SPARE
1121 {
1122     U8                          PhysDiskNum;            /* 00h */
1123     U8                          Reserved;               /* 01h */
1124     U8                          HotSparePool;           /* 02h */
1125     U8                          Flags;                   /* 03h */
1126 } IOC_5_HOT_SPARE, MPI_POINTER PTR_IOC_5_HOT_SPARE,
1127   Ioc5HotSpare_t, MPI_POINTER pIoc5HotSpare_t;
1128
1129 /* IOC Page 5 HotSpare Flags */
1130 #define MPI_IOC_PAGE_5_HOT_SPARE_ACTIVE                 (0x01)
1131
1132 /*
1133  * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
1134  * one and check Header.PageLength at runtime.
1135  */
1136 #ifndef MPI_IOC_PAGE_5_HOT_SPARE_MAX
1137 #define MPI_IOC_PAGE_5_HOT_SPARE_MAX        (1)
1138 #endif
1139
1140 typedef struct _CONFIG_PAGE_IOC_5
1141 {
1142     CONFIG_PAGE_HEADER          Header;                         /* 00h */
1143     U32                         Reserved1;                      /* 04h */
1144     U8                          NumHotSpares;                   /* 08h */
1145     U8                          Reserved2;                      /* 09h */
1146     U16                         Reserved3;                      /* 0Ah */
1147     IOC_5_HOT_SPARE             HotSpare[MPI_IOC_PAGE_5_HOT_SPARE_MAX]; /* 0Ch */
1148 } CONFIG_PAGE_IOC_5, MPI_POINTER PTR_CONFIG_PAGE_IOC_5,
1149   IOCPage5_t, MPI_POINTER pIOCPage5_t;
1150
1151 #define MPI_IOCPAGE5_PAGEVERSION                        (0x00)
1152
1153 typedef struct _CONFIG_PAGE_IOC_6
1154 {
1155     CONFIG_PAGE_HEADER          Header;                         /* 00h */
1156     U32                         CapabilitiesFlags;              /* 04h */
1157     U8                          MaxDrivesIS;                    /* 08h */
1158     U8                          MaxDrivesIM;                    /* 09h */
1159     U8                          MaxDrivesIME;                   /* 0Ah */
1160     U8                          Reserved1;                      /* 0Bh */
1161     U8                          MinDrivesIS;                    /* 0Ch */
1162     U8                          MinDrivesIM;                    /* 0Dh */
1163     U8                          MinDrivesIME;                   /* 0Eh */
1164     U8                          Reserved2;                      /* 0Fh */
1165     U8                          MaxGlobalHotSpares;             /* 10h */
1166     U8                          Reserved3;                      /* 11h */
1167     U16                         Reserved4;                      /* 12h */
1168     U32                         Reserved5;                      /* 14h */
1169     U32                         SupportedStripeSizeMapIS;       /* 18h */
1170     U32                         SupportedStripeSizeMapIME;      /* 1Ch */
1171     U32                         Reserved6;                      /* 20h */
1172     U8                          MetadataSize;                   /* 24h */
1173     U8                          Reserved7;                      /* 25h */
1174     U16                         Reserved8;                      /* 26h */
1175     U16                         MaxBadBlockTableEntries;        /* 28h */
1176     U16                         Reserved9;                      /* 2Ah */
1177     U16                         IRNvsramUsage;                  /* 2Ch */
1178     U16                         Reserved10;                     /* 2Eh */
1179     U32                         IRNvsramVersion;                /* 30h */
1180     U32                         Reserved11;                     /* 34h */
1181     U32                         Reserved12;                     /* 38h */
1182 } CONFIG_PAGE_IOC_6, MPI_POINTER PTR_CONFIG_PAGE_IOC_6,
1183   IOCPage6_t, MPI_POINTER pIOCPage6_t;
1184
1185 #define MPI_IOCPAGE6_PAGEVERSION                        (0x01)
1186
1187 /* IOC Page 6 Capabilities Flags */
1188
1189 #define MPI_IOCPAGE6_CAP_FLAGS_DISABLE_SMART_POLLING    (0x00000008)
1190
1191 #define MPI_IOCPAGE6_CAP_FLAGS_MASK_METADATA_SIZE       (0x00000006)
1192 #define MPI_IOCPAGE6_CAP_FLAGS_64MB_METADATA_SIZE       (0x00000000)
1193 #define MPI_IOCPAGE6_CAP_FLAGS_512MB_METADATA_SIZE      (0x00000002)
1194
1195 #define MPI_IOCPAGE6_CAP_FLAGS_GLOBAL_HOT_SPARE         (0x00000001)
1196
1197
1198 /****************************************************************************
1199 *   BIOS Config Pages
1200 ****************************************************************************/
1201
1202 typedef struct _CONFIG_PAGE_BIOS_1
1203 {
1204     CONFIG_PAGE_HEADER      Header;                     /* 00h */
1205     U32                     BiosOptions;                /* 04h */
1206     U32                     IOCSettings;                /* 08h */
1207     U32                     Reserved1;                  /* 0Ch */
1208     U32                     DeviceSettings;             /* 10h */
1209     U16                     NumberOfDevices;            /* 14h */
1210     U8                      ExpanderSpinup;             /* 16h */
1211     U8                      Reserved2;                  /* 17h */
1212     U16                     IOTimeoutBlockDevicesNonRM; /* 18h */
1213     U16                     IOTimeoutSequential;        /* 1Ah */
1214     U16                     IOTimeoutOther;             /* 1Ch */
1215     U16                     IOTimeoutBlockDevicesRM;    /* 1Eh */
1216 } CONFIG_PAGE_BIOS_1, MPI_POINTER PTR_CONFIG_PAGE_BIOS_1,
1217   BIOSPage1_t, MPI_POINTER pBIOSPage1_t;
1218
1219 #define MPI_BIOSPAGE1_PAGEVERSION                       (0x03)
1220
1221 /* values for the BiosOptions field */
1222 #define MPI_BIOSPAGE1_OPTIONS_SPI_ENABLE                (0x00000400)
1223 #define MPI_BIOSPAGE1_OPTIONS_FC_ENABLE                 (0x00000200)
1224 #define MPI_BIOSPAGE1_OPTIONS_SAS_ENABLE                (0x00000100)
1225 #define MPI_BIOSPAGE1_OPTIONS_DISABLE_BIOS              (0x00000001)
1226
1227 /* values for the IOCSettings field */
1228 #define MPI_BIOSPAGE1_IOCSET_MASK_INITIAL_SPINUP_DELAY  (0x0F000000)
1229 #define MPI_BIOSPAGE1_IOCSET_SHIFT_INITIAL_SPINUP_DELAY (24)
1230
1231 #define MPI_BIOSPAGE1_IOCSET_MASK_PORT_ENABLE_DELAY     (0x00F00000)
1232 #define MPI_BIOSPAGE1_IOCSET_SHIFT_PORT_ENABLE_DELAY    (20)
1233
1234 #define MPI_BIOSPAGE1_IOCSET_AUTO_PORT_ENABLE           (0x00080000)
1235 #define MPI_BIOSPAGE1_IOCSET_DIRECT_ATTACH_SPINUP_MODE  (0x00040000)
1236
1237 #define MPI_BIOSPAGE1_IOCSET_MASK_BOOT_PREFERENCE       (0x00030000)
1238 #define MPI_BIOSPAGE1_IOCSET_ENCLOSURE_SLOT_BOOT        (0x00000000)
1239 #define MPI_BIOSPAGE1_IOCSET_SAS_ADDRESS_BOOT           (0x00010000)
1240
1241 #define MPI_BIOSPAGE1_IOCSET_MASK_MAX_TARGET_SPIN_UP    (0x0000F000)
1242 #define MPI_BIOSPAGE1_IOCSET_SHIFT_MAX_TARGET_SPIN_UP   (12)
1243
1244 #define MPI_BIOSPAGE1_IOCSET_MASK_SPINUP_DELAY          (0x00000F00)
1245 #define MPI_BIOSPAGE1_IOCSET_SHIFT_SPINUP_DELAY         (8)
1246
1247 #define MPI_BIOSPAGE1_IOCSET_MASK_RM_SETTING            (0x000000C0)
1248 #define MPI_BIOSPAGE1_IOCSET_NONE_RM_SETTING            (0x00000000)
1249 #define MPI_BIOSPAGE1_IOCSET_BOOT_RM_SETTING            (0x00000040)
1250 #define MPI_BIOSPAGE1_IOCSET_MEDIA_RM_SETTING           (0x00000080)
1251
1252 #define MPI_BIOSPAGE1_IOCSET_MASK_ADAPTER_SUPPORT       (0x00000030)
1253 #define MPI_BIOSPAGE1_IOCSET_NO_SUPPORT                 (0x00000000)
1254 #define MPI_BIOSPAGE1_IOCSET_BIOS_SUPPORT               (0x00000010)
1255 #define MPI_BIOSPAGE1_IOCSET_OS_SUPPORT                 (0x00000020)
1256 #define MPI_BIOSPAGE1_IOCSET_ALL_SUPPORT                (0x00000030)
1257
1258 #define MPI_BIOSPAGE1_IOCSET_ALTERNATE_CHS              (0x00000008)
1259
1260 /* values for the DeviceSettings field */
1261 #define MPI_BIOSPAGE1_DEVSET_DISABLE_SMART_POLLING      (0x00000010)
1262 #define MPI_BIOSPAGE1_DEVSET_DISABLE_SEQ_LUN            (0x00000008)
1263 #define MPI_BIOSPAGE1_DEVSET_DISABLE_RM_LUN             (0x00000004)
1264 #define MPI_BIOSPAGE1_DEVSET_DISABLE_NON_RM_LUN         (0x00000002)
1265 #define MPI_BIOSPAGE1_DEVSET_DISABLE_OTHER_LUN          (0x00000001)
1266
1267 /* defines for the ExpanderSpinup field */
1268 #define MPI_BIOSPAGE1_EXPSPINUP_MASK_MAX_TARGET         (0xF0)
1269 #define MPI_BIOSPAGE1_EXPSPINUP_SHIFT_MAX_TARGET        (4)
1270 #define MPI_BIOSPAGE1_EXPSPINUP_MASK_DELAY              (0x0F)
1271
1272 typedef struct _MPI_BOOT_DEVICE_ADAPTER_ORDER
1273 {
1274     U32         Reserved1;                              /* 00h */
1275     U32         Reserved2;                              /* 04h */
1276     U32         Reserved3;                              /* 08h */
1277     U32         Reserved4;                              /* 0Ch */
1278     U32         Reserved5;                              /* 10h */
1279     U32         Reserved6;                              /* 14h */
1280     U32         Reserved7;                              /* 18h */
1281     U32         Reserved8;                              /* 1Ch */
1282     U32         Reserved9;                              /* 20h */
1283     U32         Reserved10;                             /* 24h */
1284     U32         Reserved11;                             /* 28h */
1285     U32         Reserved12;                             /* 2Ch */
1286     U32         Reserved13;                             /* 30h */
1287     U32         Reserved14;                             /* 34h */
1288     U32         Reserved15;                             /* 38h */
1289     U32         Reserved16;                             /* 3Ch */
1290     U32         Reserved17;                             /* 40h */
1291 } MPI_BOOT_DEVICE_ADAPTER_ORDER, MPI_POINTER PTR_MPI_BOOT_DEVICE_ADAPTER_ORDER;
1292
1293 typedef struct _MPI_BOOT_DEVICE_ADAPTER_NUMBER
1294 {
1295     U8          TargetID;                               /* 00h */
1296     U8          Bus;                                    /* 01h */
1297     U8          AdapterNumber;                          /* 02h */
1298     U8          Reserved1;                              /* 03h */
1299     U32         Reserved2;                              /* 04h */
1300     U32         Reserved3;                              /* 08h */
1301     U32         Reserved4;                              /* 0Ch */
1302     U8          LUN[8];                                 /* 10h */
1303     U32         Reserved5;                              /* 18h */
1304     U32         Reserved6;                              /* 1Ch */
1305     U32         Reserved7;                              /* 20h */
1306     U32         Reserved8;                              /* 24h */
1307     U32         Reserved9;                              /* 28h */
1308     U32         Reserved10;                             /* 2Ch */
1309     U32         Reserved11;                             /* 30h */
1310     U32         Reserved12;                             /* 34h */
1311     U32         Reserved13;                             /* 38h */
1312     U32         Reserved14;                             /* 3Ch */
1313     U32         Reserved15;                             /* 40h */
1314 } MPI_BOOT_DEVICE_ADAPTER_NUMBER, MPI_POINTER PTR_MPI_BOOT_DEVICE_ADAPTER_NUMBER;
1315
1316 typedef struct _MPI_BOOT_DEVICE_PCI_ADDRESS
1317 {
1318     U8          TargetID;                               /* 00h */
1319     U8          Bus;                                    /* 01h */
1320     U16         PCIAddress;                             /* 02h */
1321     U32         Reserved1;                              /* 04h */
1322     U32         Reserved2;                              /* 08h */
1323     U32         Reserved3;                              /* 0Ch */
1324     U8          LUN[8];                                 /* 10h */
1325     U32         Reserved4;                              /* 18h */
1326     U32         Reserved5;                              /* 1Ch */
1327     U32         Reserved6;                              /* 20h */
1328     U32         Reserved7;                              /* 24h */
1329     U32         Reserved8;                              /* 28h */
1330     U32         Reserved9;                              /* 2Ch */
1331     U32         Reserved10;                             /* 30h */
1332     U32         Reserved11;                             /* 34h */
1333     U32         Reserved12;                             /* 38h */
1334     U32         Reserved13;                             /* 3Ch */
1335     U32         Reserved14;                             /* 40h */
1336 } MPI_BOOT_DEVICE_PCI_ADDRESS, MPI_POINTER PTR_MPI_BOOT_DEVICE_PCI_ADDRESS;
1337
1338 typedef struct _MPI_BOOT_DEVICE_SLOT_NUMBER
1339 {
1340     U8          TargetID;                               /* 00h */
1341     U8          Bus;                                    /* 01h */
1342     U8          PCISlotNumber;                          /* 02h */
1343     U8          Reserved1;                              /* 03h */
1344     U32         Reserved2;                              /* 04h */
1345     U32         Reserved3;                              /* 08h */
1346     U32         Reserved4;                              /* 0Ch */
1347     U8          LUN[8];                                 /* 10h */
1348     U32         Reserved5;                              /* 18h */
1349     U32         Reserved6;                              /* 1Ch */
1350     U32         Reserved7;                              /* 20h */
1351     U32         Reserved8;                              /* 24h */
1352     U32         Reserved9;                              /* 28h */
1353     U32         Reserved10;                             /* 2Ch */
1354     U32         Reserved11;                             /* 30h */
1355     U32         Reserved12;                             /* 34h */
1356     U32         Reserved13;                             /* 38h */
1357     U32         Reserved14;                             /* 3Ch */
1358     U32         Reserved15;                             /* 40h */
1359 } MPI_BOOT_DEVICE_PCI_SLOT_NUMBER, MPI_POINTER PTR_MPI_BOOT_DEVICE_PCI_SLOT_NUMBER;
1360
1361 typedef struct _MPI_BOOT_DEVICE_FC_WWN
1362 {
1363     U64         WWPN;                                   /* 00h */
1364     U32         Reserved1;                              /* 08h */
1365     U32         Reserved2;                              /* 0Ch */
1366     U8          LUN[8];                                 /* 10h */
1367     U32         Reserved3;                              /* 18h */
1368     U32         Reserved4;                              /* 1Ch */
1369     U32         Reserved5;                              /* 20h */
1370     U32         Reserved6;                              /* 24h */
1371     U32         Reserved7;                              /* 28h */
1372     U32         Reserved8;                              /* 2Ch */
1373     U32         Reserved9;                              /* 30h */
1374     U32         Reserved10;                             /* 34h */
1375     U32         Reserved11;                             /* 38h */
1376     U32         Reserved12;                             /* 3Ch */
1377     U32         Reserved13;                             /* 40h */
1378 } MPI_BOOT_DEVICE_FC_WWN, MPI_POINTER PTR_MPI_BOOT_DEVICE_FC_WWN;
1379
1380 typedef struct _MPI_BOOT_DEVICE_SAS_WWN
1381 {
1382     U64         SASAddress;                             /* 00h */
1383     U32         Reserved1;                              /* 08h */
1384     U32         Reserved2;                              /* 0Ch */
1385     U8          LUN[8];                                 /* 10h */
1386     U32         Reserved3;                              /* 18h */
1387     U32         Reserved4;                              /* 1Ch */
1388     U32         Reserved5;                              /* 20h */
1389     U32         Reserved6;                              /* 24h */
1390     U32         Reserved7;                              /* 28h */
1391     U32         Reserved8;                              /* 2Ch */
1392     U32         Reserved9;                              /* 30h */
1393     U32         Reserved10;                             /* 34h */
1394     U32         Reserved11;                             /* 38h */
1395     U32         Reserved12;                             /* 3Ch */
1396     U32         Reserved13;                             /* 40h */
1397 } MPI_BOOT_DEVICE_SAS_WWN, MPI_POINTER PTR_MPI_BOOT_DEVICE_SAS_WWN;
1398
1399 typedef struct _MPI_BOOT_DEVICE_ENCLOSURE_SLOT
1400 {
1401     U64         EnclosureLogicalID;                     /* 00h */
1402     U32         Reserved1;                              /* 08h */
1403     U32         Reserved2;                              /* 0Ch */
1404     U8          LUN[8];                                 /* 10h */
1405     U16         SlotNumber;                             /* 18h */
1406     U16         Reserved3;                              /* 1Ah */
1407     U32         Reserved4;                              /* 1Ch */
1408     U32         Reserved5;                              /* 20h */
1409     U32         Reserved6;                              /* 24h */
1410     U32         Reserved7;                              /* 28h */
1411     U32         Reserved8;                              /* 2Ch */
1412     U32         Reserved9;                              /* 30h */
1413     U32         Reserved10;                             /* 34h */
1414     U32         Reserved11;                             /* 38h */
1415     U32         Reserved12;                             /* 3Ch */
1416     U32         Reserved13;                             /* 40h */
1417 } MPI_BOOT_DEVICE_ENCLOSURE_SLOT,
1418   MPI_POINTER PTR_MPI_BOOT_DEVICE_ENCLOSURE_SLOT;
1419
1420 typedef union _MPI_BIOSPAGE2_BOOT_DEVICE
1421 {
1422     MPI_BOOT_DEVICE_ADAPTER_ORDER   AdapterOrder;
1423     MPI_BOOT_DEVICE_ADAPTER_NUMBER  AdapterNumber;
1424     MPI_BOOT_DEVICE_PCI_ADDRESS     PCIAddress;
1425     MPI_BOOT_DEVICE_PCI_SLOT_NUMBER PCISlotNumber;
1426     MPI_BOOT_DEVICE_FC_WWN          FcWwn;
1427     MPI_BOOT_DEVICE_SAS_WWN         SasWwn;
1428     MPI_BOOT_DEVICE_ENCLOSURE_SLOT  EnclosureSlot;
1429 } MPI_BIOSPAGE2_BOOT_DEVICE, MPI_POINTER PTR_MPI_BIOSPAGE2_BOOT_DEVICE;
1430
1431 typedef struct _CONFIG_PAGE_BIOS_2
1432 {
1433     CONFIG_PAGE_HEADER          Header;                 /* 00h */
1434     U32                         Reserved1;              /* 04h */
1435     U32                         Reserved2;              /* 08h */
1436     U32                         Reserved3;              /* 0Ch */
1437     U32                         Reserved4;              /* 10h */
1438     U32                         Reserved5;              /* 14h */
1439     U32                         Reserved6;              /* 18h */
1440     U8                          BootDeviceForm;         /* 1Ch */
1441     U8                          PrevBootDeviceForm;     /* 1Ch */
1442     U16                         Reserved8;              /* 1Eh */
1443     MPI_BIOSPAGE2_BOOT_DEVICE   BootDevice;             /* 20h */
1444 } CONFIG_PAGE_BIOS_2, MPI_POINTER PTR_CONFIG_PAGE_BIOS_2,
1445   BIOSPage2_t, MPI_POINTER pBIOSPage2_t;
1446
1447 #define MPI_BIOSPAGE2_PAGEVERSION                       (0x02)
1448
1449 #define MPI_BIOSPAGE2_FORM_MASK                         (0x0F)
1450 #define MPI_BIOSPAGE2_FORM_ADAPTER_ORDER                (0x00)
1451 #define MPI_BIOSPAGE2_FORM_ADAPTER_NUMBER               (0x01)
1452 #define MPI_BIOSPAGE2_FORM_PCI_ADDRESS                  (0x02)
1453 #define MPI_BIOSPAGE2_FORM_PCI_SLOT_NUMBER              (0x03)
1454 #define MPI_BIOSPAGE2_FORM_FC_WWN                       (0x04)
1455 #define MPI_BIOSPAGE2_FORM_SAS_WWN                      (0x05)
1456 #define MPI_BIOSPAGE2_FORM_ENCLOSURE_SLOT               (0x06)
1457
1458
1459 /****************************************************************************
1460 *   SCSI Port Config Pages
1461 ****************************************************************************/
1462
1463 typedef struct _CONFIG_PAGE_SCSI_PORT_0
1464 {
1465     CONFIG_PAGE_HEADER      Header;                     /* 00h */
1466     U32                     Capabilities;               /* 04h */
1467     U32                     PhysicalInterface;          /* 08h */
1468 } CONFIG_PAGE_SCSI_PORT_0, MPI_POINTER PTR_CONFIG_PAGE_SCSI_PORT_0,
1469   SCSIPortPage0_t, MPI_POINTER pSCSIPortPage0_t;
1470
1471 #define MPI_SCSIPORTPAGE0_PAGEVERSION                   (0x02)
1472
1473 #define MPI_SCSIPORTPAGE0_CAP_IU                        (0x00000001)
1474 #define MPI_SCSIPORTPAGE0_CAP_DT                        (0x00000002)
1475 #define MPI_SCSIPORTPAGE0_CAP_QAS                       (0x00000004)
1476 #define MPI_SCSIPORTPAGE0_CAP_MIN_SYNC_PERIOD_MASK      (0x0000FF00)
1477 #define MPI_SCSIPORTPAGE0_SYNC_ASYNC                    (0x00)
1478 #define MPI_SCSIPORTPAGE0_SYNC_5                        (0x32)
1479 #define MPI_SCSIPORTPAGE0_SYNC_10                       (0x19)
1480 #define MPI_SCSIPORTPAGE0_SYNC_20                       (0x0C)
1481 #define MPI_SCSIPORTPAGE0_SYNC_33_33                    (0x0B)
1482 #define MPI_SCSIPORTPAGE0_SYNC_40                       (0x0A)
1483 #define MPI_SCSIPORTPAGE0_SYNC_80                       (0x09)
1484 #define MPI_SCSIPORTPAGE0_SYNC_160                      (0x08)
1485 #define MPI_SCSIPORTPAGE0_SYNC_UNKNOWN                  (0xFF)
1486
1487 #define MPI_SCSIPORTPAGE0_CAP_SHIFT_MIN_SYNC_PERIOD     (8)
1488 #define MPI_SCSIPORTPAGE0_CAP_GET_MIN_SYNC_PERIOD(Cap)      \
1489     (  ((Cap) & MPI_SCSIPORTPAGE0_CAP_MIN_SYNC_PERIOD_MASK) \
1490     >> MPI_SCSIPORTPAGE0_CAP_SHIFT_MIN_SYNC_PERIOD          \
1491     )
1492 #define MPI_SCSIPORTPAGE0_CAP_MAX_SYNC_OFFSET_MASK      (0x00FF0000)
1493 #define MPI_SCSIPORTPAGE0_CAP_SHIFT_MAX_SYNC_OFFSET     (16)
1494 #define MPI_SCSIPORTPAGE0_CAP_GET_MAX_SYNC_OFFSET(Cap)      \
1495     (  ((Cap) & MPI_SCSIPORTPAGE0_CAP_MAX_SYNC_OFFSET_MASK) \
1496     >> MPI_SCSIPORTPAGE0_CAP_SHIFT_MAX_SYNC_OFFSET          \
1497     )
1498 #define MPI_SCSIPORTPAGE0_CAP_IDP                       (0x08000000)
1499 #define MPI_SCSIPORTPAGE0_CAP_WIDE                      (0x20000000)
1500 #define MPI_SCSIPORTPAGE0_CAP_AIP                       (0x80000000)
1501
1502 #define MPI_SCSIPORTPAGE0_PHY_SIGNAL_TYPE_MASK          (0x00000003)
1503 #define MPI_SCSIPORTPAGE0_PHY_SIGNAL_HVD                (0x01)
1504 #define MPI_SCSIPORTPAGE0_PHY_SIGNAL_SE                 (0x02)
1505 #define MPI_SCSIPORTPAGE0_PHY_SIGNAL_LVD                (0x03)
1506 #define MPI_SCSIPORTPAGE0_PHY_MASK_CONNECTED_ID         (0xFF000000)
1507 #define MPI_SCSIPORTPAGE0_PHY_SHIFT_CONNECTED_ID        (24)
1508 #define MPI_SCSIPORTPAGE0_PHY_BUS_FREE_CONNECTED_ID     (0xFE)
1509 #define MPI_SCSIPORTPAGE0_PHY_UNKNOWN_CONNECTED_ID      (0xFF)
1510
1511
1512 typedef struct _CONFIG_PAGE_SCSI_PORT_1
1513 {
1514     CONFIG_PAGE_HEADER      Header;                     /* 00h */
1515     U32                     Configuration;              /* 04h */
1516     U32                     OnBusTimerValue;            /* 08h */
1517     U8                      TargetConfig;               /* 0Ch */
1518     U8                      Reserved1;                  /* 0Dh */
1519     U16                     IDConfig;                   /* 0Eh */
1520 } CONFIG_PAGE_SCSI_PORT_1, MPI_POINTER PTR_CONFIG_PAGE_SCSI_PORT_1,
1521   SCSIPortPage1_t, MPI_POINTER pSCSIPortPage1_t;
1522
1523 #define MPI_SCSIPORTPAGE1_PAGEVERSION                   (0x03)
1524
1525 /* Configuration values */
1526 #define MPI_SCSIPORTPAGE1_CFG_PORT_SCSI_ID_MASK         (0x000000FF)
1527 #define MPI_SCSIPORTPAGE1_CFG_PORT_RESPONSE_ID_MASK     (0xFFFF0000)
1528 #define MPI_SCSIPORTPAGE1_CFG_SHIFT_PORT_RESPONSE_ID    (16)
1529
1530 /* TargetConfig values */
1531 #define MPI_SCSIPORTPAGE1_TARGCONFIG_TARG_ONLY        (0x01)
1532 #define MPI_SCSIPORTPAGE1_TARGCONFIG_INIT_TARG        (0x02)
1533
1534
1535 typedef struct _MPI_DEVICE_INFO
1536 {
1537     U8      Timeout;                                    /* 00h */
1538     U8      SyncFactor;                                 /* 01h */
1539     U16     DeviceFlags;                                /* 02h */
1540 } MPI_DEVICE_INFO, MPI_POINTER PTR_MPI_DEVICE_INFO,
1541   MpiDeviceInfo_t, MPI_POINTER pMpiDeviceInfo_t;
1542
1543 typedef struct _CONFIG_PAGE_SCSI_PORT_2
1544 {
1545     CONFIG_PAGE_HEADER  Header;                         /* 00h */
1546     U32                 PortFlags;                      /* 04h */
1547     U32                 PortSettings;                   /* 08h */
1548     MPI_DEVICE_INFO     DeviceSettings[16];             /* 0Ch */
1549 } CONFIG_PAGE_SCSI_PORT_2, MPI_POINTER PTR_CONFIG_PAGE_SCSI_PORT_2,
1550   SCSIPortPage2_t, MPI_POINTER pSCSIPortPage2_t;
1551
1552 #define MPI_SCSIPORTPAGE2_PAGEVERSION                       (0x02)
1553
1554 /* PortFlags values */
1555 #define MPI_SCSIPORTPAGE2_PORT_FLAGS_SCAN_HIGH_TO_LOW       (0x00000001)
1556 #define MPI_SCSIPORTPAGE2_PORT_FLAGS_AVOID_SCSI_RESET       (0x00000004)
1557 #define MPI_SCSIPORTPAGE2_PORT_FLAGS_ALTERNATE_CHS          (0x00000008)
1558 #define MPI_SCSIPORTPAGE2_PORT_FLAGS_TERMINATION_DISABLE    (0x00000010)
1559
1560 #define MPI_SCSIPORTPAGE2_PORT_FLAGS_DV_MASK                (0x00000060)
1561 #define MPI_SCSIPORTPAGE2_PORT_FLAGS_FULL_DV                (0x00000000)
1562 #define MPI_SCSIPORTPAGE2_PORT_FLAGS_BASIC_DV_ONLY          (0x00000020)
1563 #define MPI_SCSIPORTPAGE2_PORT_FLAGS_OFF_DV                 (0x00000060)
1564
1565
1566 /* PortSettings values */
1567 #define MPI_SCSIPORTPAGE2_PORT_HOST_ID_MASK                 (0x0000000F)
1568 #define MPI_SCSIPORTPAGE2_PORT_MASK_INIT_HBA                (0x00000030)
1569 #define MPI_SCSIPORTPAGE2_PORT_DISABLE_INIT_HBA             (0x00000000)
1570 #define MPI_SCSIPORTPAGE2_PORT_BIOS_INIT_HBA                (0x00000010)
1571 #define MPI_SCSIPORTPAGE2_PORT_OS_INIT_HBA                  (0x00000020)
1572 #define MPI_SCSIPORTPAGE2_PORT_BIOS_OS_INIT_HBA             (0x00000030)
1573 #define MPI_SCSIPORTPAGE2_PORT_REMOVABLE_MEDIA              (0x000000C0)
1574 #define MPI_SCSIPORTPAGE2_PORT_RM_NONE                      (0x00000000)
1575 #define MPI_SCSIPORTPAGE2_PORT_RM_BOOT_ONLY                 (0x00000040)
1576 #define MPI_SCSIPORTPAGE2_PORT_RM_WITH_MEDIA                (0x00000080)
1577 #define MPI_SCSIPORTPAGE2_PORT_SPINUP_DELAY_MASK            (0x00000F00)
1578 #define MPI_SCSIPORTPAGE2_PORT_SHIFT_SPINUP_DELAY           (8)
1579 #define MPI_SCSIPORTPAGE2_PORT_MASK_NEGO_MASTER_SETTINGS    (0x00003000)
1580 #define MPI_SCSIPORTPAGE2_PORT_NEGO_MASTER_SETTINGS         (0x00000000)
1581 #define MPI_SCSIPORTPAGE2_PORT_NONE_MASTER_SETTINGS         (0x00001000)
1582 #define MPI_SCSIPORTPAGE2_PORT_ALL_MASTER_SETTINGS          (0x00003000)
1583
1584 #define MPI_SCSIPORTPAGE2_DEVICE_DISCONNECT_ENABLE          (0x0001)
1585 #define MPI_SCSIPORTPAGE2_DEVICE_ID_SCAN_ENABLE             (0x0002)
1586 #define MPI_SCSIPORTPAGE2_DEVICE_LUN_SCAN_ENABLE            (0x0004)
1587 #define MPI_SCSIPORTPAGE2_DEVICE_TAG_QUEUE_ENABLE           (0x0008)
1588 #define MPI_SCSIPORTPAGE2_DEVICE_WIDE_DISABLE               (0x0010)
1589 #define MPI_SCSIPORTPAGE2_DEVICE_BOOT_CHOICE                (0x0020)
1590
1591
1592 /****************************************************************************
1593 *   SCSI Target Device Config Pages
1594 ****************************************************************************/
1595
1596 typedef struct _CONFIG_PAGE_SCSI_DEVICE_0
1597 {
1598     CONFIG_PAGE_HEADER      Header;                     /* 00h */
1599     U32                     NegotiatedParameters;       /* 04h */
1600     U32                     Information;                /* 08h */
1601 } CONFIG_PAGE_SCSI_DEVICE_0, MPI_POINTER PTR_CONFIG_PAGE_SCSI_DEVICE_0,
1602   SCSIDevicePage0_t, MPI_POINTER pSCSIDevicePage0_t;
1603
1604 #define MPI_SCSIDEVPAGE0_PAGEVERSION                    (0x04)
1605
1606 #define MPI_SCSIDEVPAGE0_NP_IU                          (0x00000001)
1607 #define MPI_SCSIDEVPAGE0_NP_DT                          (0x00000002)
1608 #define MPI_SCSIDEVPAGE0_NP_QAS                         (0x00000004)
1609 #define MPI_SCSIDEVPAGE0_NP_HOLD_MCS                    (0x00000008)
1610 #define MPI_SCSIDEVPAGE0_NP_WR_FLOW                     (0x00000010)
1611 #define MPI_SCSIDEVPAGE0_NP_RD_STRM                     (0x00000020)
1612 #define MPI_SCSIDEVPAGE0_NP_RTI                         (0x00000040)
1613 #define MPI_SCSIDEVPAGE0_NP_PCOMP_EN                    (0x00000080)
1614 #define MPI_SCSIDEVPAGE0_NP_NEG_SYNC_PERIOD_MASK        (0x0000FF00)
1615 #define MPI_SCSIDEVPAGE0_NP_SHIFT_SYNC_PERIOD           (8)
1616 #define MPI_SCSIDEVPAGE0_NP_NEG_SYNC_OFFSET_MASK        (0x00FF0000)
1617 #define MPI_SCSIDEVPAGE0_NP_SHIFT_SYNC_OFFSET           (16)
1618 #define MPI_SCSIDEVPAGE0_NP_IDP                         (0x08000000)
1619 #define MPI_SCSIDEVPAGE0_NP_WIDE                        (0x20000000)
1620 #define MPI_SCSIDEVPAGE0_NP_AIP                         (0x80000000)
1621
1622 #define MPI_SCSIDEVPAGE0_INFO_PARAMS_NEGOTIATED         (0x00000001)
1623 #define MPI_SCSIDEVPAGE0_INFO_SDTR_REJECTED             (0x00000002)
1624 #define MPI_SCSIDEVPAGE0_INFO_WDTR_REJECTED             (0x00000004)
1625 #define MPI_SCSIDEVPAGE0_INFO_PPR_REJECTED              (0x00000008)
1626
1627
1628 typedef struct _CONFIG_PAGE_SCSI_DEVICE_1
1629 {
1630     CONFIG_PAGE_HEADER      Header;                     /* 00h */
1631     U32                     RequestedParameters;        /* 04h */
1632     U32                     Reserved;                   /* 08h */
1633     U32                     Configuration;              /* 0Ch */
1634 } CONFIG_PAGE_SCSI_DEVICE_1, MPI_POINTER PTR_CONFIG_PAGE_SCSI_DEVICE_1,
1635   SCSIDevicePage1_t, MPI_POINTER pSCSIDevicePage1_t;
1636
1637 #define MPI_SCSIDEVPAGE1_PAGEVERSION                    (0x05)
1638
1639 #define MPI_SCSIDEVPAGE1_RP_IU                          (0x00000001)
1640 #define MPI_SCSIDEVPAGE1_RP_DT                          (0x00000002)
1641 #define MPI_SCSIDEVPAGE1_RP_QAS                         (0x00000004)
1642 #define MPI_SCSIDEVPAGE1_RP_HOLD_MCS                    (0x00000008)
1643 #define MPI_SCSIDEVPAGE1_RP_WR_FLOW                     (0x00000010)
1644 #define MPI_SCSIDEVPAGE1_RP_RD_STRM                     (0x00000020)
1645 #define MPI_SCSIDEVPAGE1_RP_RTI                         (0x00000040)
1646 #define MPI_SCSIDEVPAGE1_RP_PCOMP_EN                    (0x00000080)
1647 #define MPI_SCSIDEVPAGE1_RP_MIN_SYNC_PERIOD_MASK        (0x0000FF00)
1648 #define MPI_SCSIDEVPAGE1_RP_SHIFT_MIN_SYNC_PERIOD       (8)
1649 #define MPI_SCSIDEVPAGE1_RP_MAX_SYNC_OFFSET_MASK        (0x00FF0000)
1650 #define MPI_SCSIDEVPAGE1_RP_SHIFT_MAX_SYNC_OFFSET       (16)
1651 #define MPI_SCSIDEVPAGE1_RP_IDP                         (0x08000000)
1652 #define MPI_SCSIDEVPAGE1_RP_WIDE                        (0x20000000)
1653 #define MPI_SCSIDEVPAGE1_RP_AIP                         (0x80000000)
1654
1655 #define MPI_SCSIDEVPAGE1_CONF_WDTR_DISALLOWED           (0x00000002)
1656 #define MPI_SCSIDEVPAGE1_CONF_SDTR_DISALLOWED           (0x00000004)
1657 #define MPI_SCSIDEVPAGE1_CONF_EXTENDED_PARAMS_ENABLE    (0x00000008)
1658 #define MPI_SCSIDEVPAGE1_CONF_FORCE_PPR_MSG             (0x00000010)
1659
1660
1661 typedef struct _CONFIG_PAGE_SCSI_DEVICE_2
1662 {
1663     CONFIG_PAGE_HEADER      Header;                     /* 00h */
1664     U32                     DomainValidation;           /* 04h */
1665     U32                     ParityPipeSelect;           /* 08h */
1666     U32                     DataPipeSelect;             /* 0Ch */
1667 } CONFIG_PAGE_SCSI_DEVICE_2, MPI_POINTER PTR_CONFIG_PAGE_SCSI_DEVICE_2,
1668   SCSIDevicePage2_t, MPI_POINTER pSCSIDevicePage2_t;
1669
1670 #define MPI_SCSIDEVPAGE2_PAGEVERSION                    (0x01)
1671
1672 #define MPI_SCSIDEVPAGE2_DV_ISI_ENABLE                  (0x00000010)
1673 #define MPI_SCSIDEVPAGE2_DV_SECONDARY_DRIVER_ENABLE     (0x00000020)
1674 #define MPI_SCSIDEVPAGE2_DV_SLEW_RATE_CTRL              (0x00000380)
1675 #define MPI_SCSIDEVPAGE2_DV_PRIM_DRIVE_STR_CTRL         (0x00001C00)
1676 #define MPI_SCSIDEVPAGE2_DV_SECOND_DRIVE_STR_CTRL       (0x0000E000)
1677 #define MPI_SCSIDEVPAGE2_DV_XCLKH_ST                    (0x10000000)
1678 #define MPI_SCSIDEVPAGE2_DV_XCLKS_ST                    (0x20000000)
1679 #define MPI_SCSIDEVPAGE2_DV_XCLKH_DT                    (0x40000000)
1680 #define MPI_SCSIDEVPAGE2_DV_XCLKS_DT                    (0x80000000)
1681
1682 #define MPI_SCSIDEVPAGE2_PPS_PPS_MASK                   (0x00000003)
1683
1684 #define MPI_SCSIDEVPAGE2_DPS_BIT_0_PL_SELECT_MASK       (0x00000003)
1685 #define MPI_SCSIDEVPAGE2_DPS_BIT_1_PL_SELECT_MASK       (0x0000000C)
1686 #define MPI_SCSIDEVPAGE2_DPS_BIT_2_PL_SELECT_MASK       (0x00000030)
1687 #define MPI_SCSIDEVPAGE2_DPS_BIT_3_PL_SELECT_MASK       (0x000000C0)
1688 #define MPI_SCSIDEVPAGE2_DPS_BIT_4_PL_SELECT_MASK       (0x00000300)
1689 #define MPI_SCSIDEVPAGE2_DPS_BIT_5_PL_SELECT_MASK       (0x00000C00)
1690 #define MPI_SCSIDEVPAGE2_DPS_BIT_6_PL_SELECT_MASK       (0x00003000)
1691 #define MPI_SCSIDEVPAGE2_DPS_BIT_7_PL_SELECT_MASK       (0x0000C000)
1692 #define MPI_SCSIDEVPAGE2_DPS_BIT_8_PL_SELECT_MASK       (0x00030000)
1693 #define MPI_SCSIDEVPAGE2_DPS_BIT_9_PL_SELECT_MASK       (0x000C0000)
1694 #define MPI_SCSIDEVPAGE2_DPS_BIT_10_PL_SELECT_MASK      (0x00300000)
1695 #define MPI_SCSIDEVPAGE2_DPS_BIT_11_PL_SELECT_MASK      (0x00C00000)
1696 #define MPI_SCSIDEVPAGE2_DPS_BIT_12_PL_SELECT_MASK      (0x03000000)
1697 #define MPI_SCSIDEVPAGE2_DPS_BIT_13_PL_SELECT_MASK      (0x0C000000)
1698 #define MPI_SCSIDEVPAGE2_DPS_BIT_14_PL_SELECT_MASK      (0x30000000)
1699 #define MPI_SCSIDEVPAGE2_DPS_BIT_15_PL_SELECT_MASK      (0xC0000000)
1700
1701
1702 typedef struct _CONFIG_PAGE_SCSI_DEVICE_3
1703 {
1704     CONFIG_PAGE_HEADER      Header;                     /* 00h */
1705     U16                     MsgRejectCount;             /* 04h */
1706     U16                     PhaseErrorCount;            /* 06h */
1707     U16                     ParityErrorCount;           /* 08h */
1708     U16                     Reserved;                   /* 0Ah */
1709 } CONFIG_PAGE_SCSI_DEVICE_3, MPI_POINTER PTR_CONFIG_PAGE_SCSI_DEVICE_3,
1710   SCSIDevicePage3_t, MPI_POINTER pSCSIDevicePage3_t;
1711
1712 #define MPI_SCSIDEVPAGE3_PAGEVERSION                    (0x00)
1713
1714 #define MPI_SCSIDEVPAGE3_MAX_COUNTER                    (0xFFFE)
1715 #define MPI_SCSIDEVPAGE3_UNSUPPORTED_COUNTER            (0xFFFF)
1716
1717
1718 /****************************************************************************
1719 *   FC Port Config Pages
1720 ****************************************************************************/
1721
1722 typedef struct _CONFIG_PAGE_FC_PORT_0
1723 {
1724     CONFIG_PAGE_HEADER      Header;                     /* 00h */
1725     U32                     Flags;                      /* 04h */
1726     U8                      MPIPortNumber;              /* 08h */
1727     U8                      LinkType;                   /* 09h */
1728     U8                      PortState;                  /* 0Ah */
1729     U8                      Reserved;                   /* 0Bh */
1730     U32                     PortIdentifier;             /* 0Ch */
1731     U64                     WWNN;                       /* 10h */
1732     U64                     WWPN;                       /* 18h */
1733     U32                     SupportedServiceClass;      /* 20h */
1734     U32                     SupportedSpeeds;            /* 24h */
1735     U32                     CurrentSpeed;               /* 28h */
1736     U32                     MaxFrameSize;               /* 2Ch */
1737     U64                     FabricWWNN;                 /* 30h */
1738     U64                     FabricWWPN;                 /* 38h */
1739     U32                     DiscoveredPortsCount;       /* 40h */
1740     U32                     MaxInitiators;              /* 44h */
1741     U8                      MaxAliasesSupported;        /* 48h */
1742     U8                      MaxHardAliasesSupported;    /* 49h */
1743     U8                      NumCurrentAliases;          /* 4Ah */
1744     U8                      Reserved1;                  /* 4Bh */
1745 } CONFIG_PAGE_FC_PORT_0, MPI_POINTER PTR_CONFIG_PAGE_FC_PORT_0,
1746   FCPortPage0_t, MPI_POINTER pFCPortPage0_t;
1747
1748 #define MPI_FCPORTPAGE0_PAGEVERSION                     (0x02)
1749
1750 #define MPI_FCPORTPAGE0_FLAGS_PROT_MASK                 (0x0000000F)
1751 #define MPI_FCPORTPAGE0_FLAGS_PROT_FCP_INIT             (MPI_PORTFACTS_PROTOCOL_INITIATOR)
1752 #define MPI_FCPORTPAGE0_FLAGS_PROT_FCP_TARG             (MPI_PORTFACTS_PROTOCOL_TARGET)
1753 #define MPI_FCPORTPAGE0_FLAGS_PROT_LAN                  (MPI_PORTFACTS_PROTOCOL_LAN)
1754 #define MPI_FCPORTPAGE0_FLAGS_PROT_LOGBUSADDR           (MPI_PORTFACTS_PROTOCOL_LOGBUSADDR)
1755
1756 #define MPI_FCPORTPAGE0_FLAGS_ALIAS_ALPA_SUPPORTED      (0x00000010)
1757 #define MPI_FCPORTPAGE0_FLAGS_ALIAS_WWN_SUPPORTED       (0x00000020)
1758 #define MPI_FCPORTPAGE0_FLAGS_FABRIC_WWN_VALID          (0x00000040)
1759
1760 #define MPI_FCPORTPAGE0_FLAGS_ATTACH_TYPE_MASK          (0x00000F00)
1761 #define MPI_FCPORTPAGE0_FLAGS_ATTACH_NO_INIT            (0x00000000)
1762 #define MPI_FCPORTPAGE0_FLAGS_ATTACH_POINT_TO_POINT     (0x00000100)
1763 #define MPI_FCPORTPAGE0_FLAGS_ATTACH_PRIVATE_LOOP       (0x00000200)
1764 #define MPI_FCPORTPAGE0_FLAGS_ATTACH_FABRIC_DIRECT      (0x00000400)
1765 #define MPI_FCPORTPAGE0_FLAGS_ATTACH_PUBLIC_LOOP        (0x00000800)
1766
1767 #define MPI_FCPORTPAGE0_LTYPE_RESERVED                  (0x00)
1768 #define MPI_FCPORTPAGE0_LTYPE_OTHER                     (0x01)
1769 #define MPI_FCPORTPAGE0_LTYPE_UNKNOWN                   (0x02)
1770 #define MPI_FCPORTPAGE0_LTYPE_COPPER                    (0x03)
1771 #define MPI_FCPORTPAGE0_LTYPE_SINGLE_1300               (0x04)
1772 #define MPI_FCPORTPAGE0_LTYPE_SINGLE_1500               (0x05)
1773 #define MPI_FCPORTPAGE0_LTYPE_50_LASER_MULTI            (0x06)
1774 #define MPI_FCPORTPAGE0_LTYPE_50_LED_MULTI              (0x07)
1775 #define MPI_FCPORTPAGE0_LTYPE_62_LASER_MULTI            (0x08)
1776 #define MPI_FCPORTPAGE0_LTYPE_62_LED_MULTI              (0x09)
1777 #define MPI_FCPORTPAGE0_LTYPE_MULTI_LONG_WAVE           (0x0A)
1778 #define MPI_FCPORTPAGE0_LTYPE_MULTI_SHORT_WAVE          (0x0B)
1779 #define MPI_FCPORTPAGE0_LTYPE_LASER_SHORT_WAVE          (0x0C)
1780 #define MPI_FCPORTPAGE0_LTYPE_LED_SHORT_WAVE            (0x0D)
1781 #define MPI_FCPORTPAGE0_LTYPE_1300_LONG_WAVE            (0x0E)
1782 #define MPI_FCPORTPAGE0_LTYPE_1500_LONG_WAVE            (0x0F)
1783
1784 #define MPI_FCPORTPAGE0_PORTSTATE_UNKNOWN               (0x01)      /*(SNIA)HBA_PORTSTATE_UNKNOWN       1 Unknown */
1785 #define MPI_FCPORTPAGE0_PORTSTATE_ONLINE                (0x02)      /*(SNIA)HBA_PORTSTATE_ONLINE        2 Operational */
1786 #define MPI_FCPORTPAGE0_PORTSTATE_OFFLINE               (0x03)      /*(SNIA)HBA_PORTSTATE_OFFLINE       3 User Offline */
1787 #define MPI_FCPORTPAGE0_PORTSTATE_BYPASSED              (0x04)      /*(SNIA)HBA_PORTSTATE_BYPASSED      4 Bypassed */
1788 #define MPI_FCPORTPAGE0_PORTSTATE_DIAGNOST              (0x05)      /*(SNIA)HBA_PORTSTATE_DIAGNOSTICS   5 In diagnostics mode */
1789 #define MPI_FCPORTPAGE0_PORTSTATE_LINKDOWN              (0x06)      /*(SNIA)HBA_PORTSTATE_LINKDOWN      6 Link Down */
1790 #define MPI_FCPORTPAGE0_PORTSTATE_ERROR                 (0x07)      /*(SNIA)HBA_PORTSTATE_ERROR         7 Port Error */
1791 #define MPI_FCPORTPAGE0_PORTSTATE_LOOPBACK              (0x08)      /*(SNIA)HBA_PORTSTATE_LOOPBACK      8 Loopback */
1792
1793 #define MPI_FCPORTPAGE0_SUPPORT_CLASS_1                 (0x00000001)
1794 #define MPI_FCPORTPAGE0_SUPPORT_CLASS_2                 (0x00000002)
1795 #define MPI_FCPORTPAGE0_SUPPORT_CLASS_3                 (0x00000004)
1796
1797 #define MPI_FCPORTPAGE0_SUPPORT_SPEED_UKNOWN            (0x00000000) /* (SNIA)HBA_PORTSPEED_UNKNOWN 0   Unknown - transceiver incapable of reporting */
1798 #define MPI_FCPORTPAGE0_SUPPORT_1GBIT_SPEED             (0x00000001) /* (SNIA)HBA_PORTSPEED_1GBIT   1   1 GBit/sec */
1799 #define MPI_FCPORTPAGE0_SUPPORT_2GBIT_SPEED             (0x00000002) /* (SNIA)HBA_PORTSPEED_2GBIT   2   2 GBit/sec */
1800 #define MPI_FCPORTPAGE0_SUPPORT_10GBIT_SPEED            (0x00000004) /* (SNIA)HBA_PORTSPEED_10GBIT  4  10 GBit/sec */
1801 #define MPI_FCPORTPAGE0_SUPPORT_4GBIT_SPEED             (0x00000008) /* (SNIA)HBA_PORTSPEED_4GBIT   8   4 GBit/sec */
1802
1803 #define MPI_FCPORTPAGE0_CURRENT_SPEED_UKNOWN            MPI_FCPORTPAGE0_SUPPORT_SPEED_UKNOWN
1804 #define MPI_FCPORTPAGE0_CURRENT_SPEED_1GBIT             MPI_FCPORTPAGE0_SUPPORT_1GBIT_SPEED
1805 #define MPI_FCPORTPAGE0_CURRENT_SPEED_2GBIT             MPI_FCPORTPAGE0_SUPPORT_2GBIT_SPEED
1806 #define MPI_FCPORTPAGE0_CURRENT_SPEED_10GBIT            MPI_FCPORTPAGE0_SUPPORT_10GBIT_SPEED
1807 #define MPI_FCPORTPAGE0_CURRENT_SPEED_4GBIT             MPI_FCPORTPAGE0_SUPPORT_4GBIT_SPEED
1808 #define MPI_FCPORTPAGE0_CURRENT_SPEED_NOT_NEGOTIATED    (0x00008000)        /* (SNIA)HBA_PORTSPEED_NOT_NEGOTIATED (1<<15) Speed not established */
1809
1810
1811 typedef struct _CONFIG_PAGE_FC_PORT_1
1812 {
1813     CONFIG_PAGE_HEADER      Header;                     /* 00h */
1814     U32                     Flags;                      /* 04h */
1815     U64                     NoSEEPROMWWNN;              /* 08h */
1816     U64                     NoSEEPROMWWPN;              /* 10h */
1817     U8                      HardALPA;                   /* 18h */
1818     U8                      LinkConfig;                 /* 19h */
1819     U8                      TopologyConfig;             /* 1Ah */
1820     U8                      AltConnector;               /* 1Bh */
1821     U8                      NumRequestedAliases;        /* 1Ch */
1822     U8                      RR_TOV;                     /* 1Dh */
1823     U8                      InitiatorDeviceTimeout;     /* 1Eh */
1824     U8                      InitiatorIoPendTimeout;     /* 1Fh */
1825 } CONFIG_PAGE_FC_PORT_1, MPI_POINTER PTR_CONFIG_PAGE_FC_PORT_1,
1826   FCPortPage1_t, MPI_POINTER pFCPortPage1_t;
1827
1828 #define MPI_FCPORTPAGE1_PAGEVERSION                     (0x06)
1829
1830 #define MPI_FCPORTPAGE1_FLAGS_EXT_FCP_STATUS_EN         (0x08000000)
1831 #define MPI_FCPORTPAGE1_FLAGS_IMMEDIATE_ERROR_REPLY     (0x04000000)
1832 #define MPI_FCPORTPAGE1_FLAGS_FORCE_USE_NOSEEPROM_WWNS  (0x02000000)
1833 #define MPI_FCPORTPAGE1_FLAGS_VERBOSE_RESCAN_EVENTS     (0x01000000)
1834 #define MPI_FCPORTPAGE1_FLAGS_TARGET_MODE_OXID          (0x00800000)
1835 #define MPI_FCPORTPAGE1_FLAGS_PORT_OFFLINE              (0x00400000)
1836 #define MPI_FCPORTPAGE1_FLAGS_SOFT_ALPA_FALLBACK        (0x00200000)
1837 #define MPI_FCPORTPAGE1_FLAGS_TARGET_LARGE_CDB_ENABLE   (0x00000080)
1838 #define MPI_FCPORTPAGE1_FLAGS_MASK_RR_TOV_UNITS         (0x00000070)
1839 #define MPI_FCPORTPAGE1_FLAGS_SUPPRESS_PROT_REG         (0x00000008)
1840 #define MPI_FCPORTPAGE1_FLAGS_PLOGI_ON_LOGO             (0x00000004)
1841 #define MPI_FCPORTPAGE1_FLAGS_MAINTAIN_LOGINS           (0x00000002)
1842 #define MPI_FCPORTPAGE1_FLAGS_SORT_BY_DID               (0x00000001)
1843 #define MPI_FCPORTPAGE1_FLAGS_SORT_BY_WWN               (0x00000000)
1844
1845 #define MPI_FCPORTPAGE1_FLAGS_PROT_MASK                 (0xF0000000)
1846 #define MPI_FCPORTPAGE1_FLAGS_PROT_SHIFT                (28)
1847 #define MPI_FCPORTPAGE1_FLAGS_PROT_FCP_INIT             ((U32)MPI_PORTFACTS_PROTOCOL_INITIATOR << MPI_FCPORTPAGE1_FLAGS_PROT_SHIFT)
1848 #define MPI_FCPORTPAGE1_FLAGS_PROT_FCP_TARG             ((U32)MPI_PORTFACTS_PROTOCOL_TARGET << MPI_FCPORTPAGE1_FLAGS_PROT_SHIFT)
1849 #define MPI_FCPORTPAGE1_FLAGS_PROT_LAN                  ((U32)MPI_PORTFACTS_PROTOCOL_LAN << MPI_FCPORTPAGE1_FLAGS_PROT_SHIFT)
1850 #define MPI_FCPORTPAGE1_FLAGS_PROT_LOGBUSADDR           ((U32)MPI_PORTFACTS_PROTOCOL_LOGBUSADDR << MPI_FCPORTPAGE1_FLAGS_PROT_SHIFT)
1851
1852 #define MPI_FCPORTPAGE1_FLAGS_NONE_RR_TOV_UNITS         (0x00000000)
1853 #define MPI_FCPORTPAGE1_FLAGS_THOUSANDTH_RR_TOV_UNITS   (0x00000010)
1854 #define MPI_FCPORTPAGE1_FLAGS_TENTH_RR_TOV_UNITS        (0x00000030)
1855 #define MPI_FCPORTPAGE1_FLAGS_TEN_RR_TOV_UNITS          (0x00000050)
1856
1857 #define MPI_FCPORTPAGE1_HARD_ALPA_NOT_USED              (0xFF)
1858
1859 #define MPI_FCPORTPAGE1_LCONFIG_SPEED_MASK              (0x0F)
1860 #define MPI_FCPORTPAGE1_LCONFIG_SPEED_1GIG              (0x00)
1861 #define MPI_FCPORTPAGE1_LCONFIG_SPEED_2GIG              (0x01)
1862 #define MPI_FCPORTPAGE1_LCONFIG_SPEED_4GIG              (0x02)
1863 #define MPI_FCPORTPAGE1_LCONFIG_SPEED_10GIG             (0x03)
1864 #define MPI_FCPORTPAGE1_LCONFIG_SPEED_AUTO              (0x0F)
1865
1866 #define MPI_FCPORTPAGE1_TOPOLOGY_MASK                   (0x0F)
1867 #define MPI_FCPORTPAGE1_TOPOLOGY_NLPORT                 (0x01)
1868 #define MPI_FCPORTPAGE1_TOPOLOGY_NPORT                  (0x02)
1869 #define MPI_FCPORTPAGE1_TOPOLOGY_AUTO                   (0x0F)
1870
1871 #define MPI_FCPORTPAGE1_ALT_CONN_UNKNOWN                (0x00)
1872
1873 #define MPI_FCPORTPAGE1_INITIATOR_DEV_TIMEOUT_MASK      (0x7F)
1874 #define MPI_FCPORTPAGE1_INITIATOR_DEV_UNIT_16           (0x80)
1875
1876
1877 typedef struct _CONFIG_PAGE_FC_PORT_2
1878 {
1879     CONFIG_PAGE_HEADER      Header;                     /* 00h */
1880     U8                      NumberActive;               /* 04h */
1881     U8                      ALPA[127];                  /* 05h */
1882 } CONFIG_PAGE_FC_PORT_2, MPI_POINTER PTR_CONFIG_PAGE_FC_PORT_2,
1883   FCPortPage2_t, MPI_POINTER pFCPortPage2_t;
1884
1885 #define MPI_FCPORTPAGE2_PAGEVERSION                     (0x01)
1886
1887
1888 typedef struct _WWN_FORMAT
1889 {
1890     U64                     WWNN;                       /* 00h */
1891     U64                     WWPN;                       /* 08h */
1892 } WWN_FORMAT, MPI_POINTER PTR_WWN_FORMAT,
1893   WWNFormat, MPI_POINTER pWWNFormat;
1894
1895 typedef union _FC_PORT_PERSISTENT_PHYSICAL_ID
1896 {
1897     WWN_FORMAT              WWN;
1898     U32                     Did;
1899 } FC_PORT_PERSISTENT_PHYSICAL_ID, MPI_POINTER PTR_FC_PORT_PERSISTENT_PHYSICAL_ID,
1900   PersistentPhysicalId_t, MPI_POINTER pPersistentPhysicalId_t;
1901
1902 typedef struct _FC_PORT_PERSISTENT
1903 {
1904     FC_PORT_PERSISTENT_PHYSICAL_ID  PhysicalIdentifier; /* 00h */
1905     U8                              TargetID;           /* 10h */
1906     U8                              Bus;                /* 11h */
1907     U16                             Flags;              /* 12h */
1908 } FC_PORT_PERSISTENT, MPI_POINTER PTR_FC_PORT_PERSISTENT,
1909   PersistentData_t, MPI_POINTER pPersistentData_t;
1910
1911 #define MPI_PERSISTENT_FLAGS_SHIFT                      (16)
1912 #define MPI_PERSISTENT_FLAGS_ENTRY_VALID                (0x0001)
1913 #define MPI_PERSISTENT_FLAGS_SCAN_ID                    (0x0002)
1914 #define MPI_PERSISTENT_FLAGS_SCAN_LUNS                  (0x0004)
1915 #define MPI_PERSISTENT_FLAGS_BOOT_DEVICE                (0x0008)
1916 #define MPI_PERSISTENT_FLAGS_BY_DID                     (0x0080)
1917
1918 /*
1919  * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
1920  * one and check Header.PageLength at runtime.
1921  */
1922 #ifndef MPI_FC_PORT_PAGE_3_ENTRY_MAX
1923 #define MPI_FC_PORT_PAGE_3_ENTRY_MAX        (1)
1924 #endif
1925
1926 typedef struct _CONFIG_PAGE_FC_PORT_3
1927 {
1928     CONFIG_PAGE_HEADER      Header;                                 /* 00h */
1929     FC_PORT_PERSISTENT      Entry[MPI_FC_PORT_PAGE_3_ENTRY_MAX];    /* 04h */
1930 } CONFIG_PAGE_FC_PORT_3, MPI_POINTER PTR_CONFIG_PAGE_FC_PORT_3,
1931   FCPortPage3_t, MPI_POINTER pFCPortPage3_t;
1932
1933 #define MPI_FCPORTPAGE3_PAGEVERSION                     (0x01)
1934
1935
1936 typedef struct _CONFIG_PAGE_FC_PORT_4
1937 {
1938     CONFIG_PAGE_HEADER      Header;                     /* 00h */
1939     U32                     PortFlags;                  /* 04h */
1940     U32                     PortSettings;               /* 08h */
1941 } CONFIG_PAGE_FC_PORT_4, MPI_POINTER PTR_CONFIG_PAGE_FC_PORT_4,
1942   FCPortPage4_t, MPI_POINTER pFCPortPage4_t;
1943
1944 #define MPI_FCPORTPAGE4_PAGEVERSION                     (0x00)
1945
1946 #define MPI_FCPORTPAGE4_PORT_FLAGS_ALTERNATE_CHS        (0x00000008)
1947
1948 #define MPI_FCPORTPAGE4_PORT_MASK_INIT_HBA              (0x00000030)
1949 #define MPI_FCPORTPAGE4_PORT_DISABLE_INIT_HBA           (0x00000000)
1950 #define MPI_FCPORTPAGE4_PORT_BIOS_INIT_HBA              (0x00000010)
1951 #define MPI_FCPORTPAGE4_PORT_OS_INIT_HBA                (0x00000020)
1952 #define MPI_FCPORTPAGE4_PORT_BIOS_OS_INIT_HBA           (0x00000030)
1953 #define MPI_FCPORTPAGE4_PORT_REMOVABLE_MEDIA            (0x000000C0)
1954 #define MPI_FCPORTPAGE4_PORT_SPINUP_DELAY_MASK          (0x00000F00)
1955
1956
1957 typedef struct _CONFIG_PAGE_FC_PORT_5_ALIAS_INFO
1958 {
1959     U8      Flags;                                      /* 00h */
1960     U8      AliasAlpa;                                  /* 01h */
1961     U16     Reserved;                                   /* 02h */
1962     U64     AliasWWNN;                                  /* 04h */
1963     U64     AliasWWPN;                                  /* 0Ch */
1964 } CONFIG_PAGE_FC_PORT_5_ALIAS_INFO,
1965   MPI_POINTER PTR_CONFIG_PAGE_FC_PORT_5_ALIAS_INFO,
1966   FcPortPage5AliasInfo_t, MPI_POINTER pFcPortPage5AliasInfo_t;
1967
1968 typedef struct _CONFIG_PAGE_FC_PORT_5
1969 {
1970     CONFIG_PAGE_HEADER                  Header;         /* 00h */
1971     CONFIG_PAGE_FC_PORT_5_ALIAS_INFO    AliasInfo;      /* 04h */
1972 } CONFIG_PAGE_FC_PORT_5, MPI_POINTER PTR_CONFIG_PAGE_FC_PORT_5,
1973   FCPortPage5_t, MPI_POINTER pFCPortPage5_t;
1974
1975 #define MPI_FCPORTPAGE5_PAGEVERSION                     (0x02)
1976
1977 #define MPI_FCPORTPAGE5_FLAGS_ALPA_ACQUIRED             (0x01)
1978 #define MPI_FCPORTPAGE5_FLAGS_HARD_ALPA                 (0x02)
1979 #define MPI_FCPORTPAGE5_FLAGS_HARD_WWNN                 (0x04)
1980 #define MPI_FCPORTPAGE5_FLAGS_HARD_WWPN                 (0x08)
1981 #define MPI_FCPORTPAGE5_FLAGS_DISABLE                   (0x10)
1982
1983 typedef struct _CONFIG_PAGE_FC_PORT_6
1984 {
1985     CONFIG_PAGE_HEADER      Header;                     /* 00h */
1986     U32                     Reserved;                   /* 04h */
1987     U64                     TimeSinceReset;             /* 08h */
1988     U64                     TxFrames;                   /* 10h */
1989     U64                     RxFrames;                   /* 18h */
1990     U64                     TxWords;                    /* 20h */
1991     U64                     RxWords;                    /* 28h */
1992     U64                     LipCount;                   /* 30h */
1993     U64                     NosCount;                   /* 38h */
1994     U64                     ErrorFrames;                /* 40h */
1995     U64                     DumpedFrames;               /* 48h */
1996     U64                     LinkFailureCount;           /* 50h */
1997     U64                     LossOfSyncCount;            /* 58h */
1998     U64                     LossOfSignalCount;          /* 60h */
1999     U64                     PrimativeSeqErrCount;       /* 68h */
2000     U64                     InvalidTxWordCount;         /* 70h */
2001     U64                     InvalidCrcCount;            /* 78h */
2002     U64                     FcpInitiatorIoCount;        /* 80h */
2003 } CONFIG_PAGE_FC_PORT_6, MPI_POINTER PTR_CONFIG_PAGE_FC_PORT_6,
2004   FCPortPage6_t, MPI_POINTER pFCPortPage6_t;
2005
2006 #define MPI_FCPORTPAGE6_PAGEVERSION                     (0x00)
2007
2008
2009 typedef struct _CONFIG_PAGE_FC_PORT_7
2010 {
2011     CONFIG_PAGE_HEADER      Header;                     /* 00h */
2012     U32                     Reserved;                   /* 04h */
2013     U8                      PortSymbolicName[256];      /* 08h */
2014 } CONFIG_PAGE_FC_PORT_7, MPI_POINTER PTR_CONFIG_PAGE_FC_PORT_7,
2015   FCPortPage7_t, MPI_POINTER pFCPortPage7_t;
2016
2017 #define MPI_FCPORTPAGE7_PAGEVERSION                     (0x00)
2018
2019
2020 typedef struct _CONFIG_PAGE_FC_PORT_8
2021 {
2022     CONFIG_PAGE_HEADER      Header;                     /* 00h */
2023     U32                     BitVector[8];               /* 04h */
2024 } CONFIG_PAGE_FC_PORT_8, MPI_POINTER PTR_CONFIG_PAGE_FC_PORT_8,
2025   FCPortPage8_t, MPI_POINTER pFCPortPage8_t;
2026
2027 #define MPI_FCPORTPAGE8_PAGEVERSION                     (0x00)
2028
2029
2030 typedef struct _CONFIG_PAGE_FC_PORT_9
2031 {
2032     CONFIG_PAGE_HEADER      Header;                     /* 00h */
2033     U32                     Reserved;                   /* 04h */
2034     U64                     GlobalWWPN;                 /* 08h */
2035     U64                     GlobalWWNN;                 /* 10h */
2036     U32                     UnitType;                   /* 18h */
2037     U32                     PhysicalPortNumber;         /* 1Ch */
2038     U32                     NumAttachedNodes;           /* 20h */
2039     U16                     IPVersion;                  /* 24h */
2040     U16                     UDPPortNumber;              /* 26h */
2041     U8                      IPAddress[16];              /* 28h */
2042     U16                     Reserved1;                  /* 38h */
2043     U16                     TopologyDiscoveryFlags;     /* 3Ah */
2044 } CONFIG_PAGE_FC_PORT_9, MPI_POINTER PTR_CONFIG_PAGE_FC_PORT_9,
2045   FCPortPage9_t, MPI_POINTER pFCPortPage9_t;
2046
2047 #define MPI_FCPORTPAGE9_PAGEVERSION                     (0x00)
2048
2049
2050 typedef struct _CONFIG_PAGE_FC_PORT_10_BASE_SFP_DATA
2051 {
2052     U8                      Id;                         /* 10h */
2053     U8                      ExtId;                      /* 11h */
2054     U8                      Connector;                  /* 12h */
2055     U8                      Transceiver[8];             /* 13h */
2056     U8                      Encoding;                   /* 1Bh */
2057     U8                      BitRate_100mbs;             /* 1Ch */
2058     U8                      Reserved1;                  /* 1Dh */
2059     U8                      Length9u_km;                /* 1Eh */
2060     U8                      Length9u_100m;              /* 1Fh */
2061     U8                      Length50u_10m;              /* 20h */
2062     U8                      Length62p5u_10m;            /* 21h */
2063     U8                      LengthCopper_m;             /* 22h */
2064     U8                      Reseverved2;                /* 22h */
2065     U8                      VendorName[16];             /* 24h */
2066     U8                      Reserved3;                  /* 34h */
2067     U8                      VendorOUI[3];               /* 35h */
2068     U8                      VendorPN[16];               /* 38h */
2069     U8                      VendorRev[4];               /* 48h */
2070     U16                     Wavelength;                 /* 4Ch */
2071     U8                      Reserved4;                  /* 4Eh */
2072     U8                      CC_BASE;                    /* 4Fh */
2073 } CONFIG_PAGE_FC_PORT_10_BASE_SFP_DATA,
2074   MPI_POINTER PTR_CONFIG_PAGE_FC_PORT_10_BASE_SFP_DATA,
2075   FCPortPage10BaseSfpData_t, MPI_POINTER pFCPortPage10BaseSfpData_t;
2076
2077 #define MPI_FCPORT10_BASE_ID_UNKNOWN        (0x00)
2078 #define MPI_FCPORT10_BASE_ID_GBIC           (0x01)
2079 #define MPI_FCPORT10_BASE_ID_FIXED          (0x02)
2080 #define MPI_FCPORT10_BASE_ID_SFP            (0x03)
2081 #define MPI_FCPORT10_BASE_ID_SFP_MIN        (0x04)
2082 #define MPI_FCPORT10_BASE_ID_SFP_MAX        (0x7F)
2083 #define MPI_FCPORT10_BASE_ID_VEND_SPEC_MASK (0x80)
2084
2085 #define MPI_FCPORT10_BASE_EXTID_UNKNOWN     (0x00)
2086 #define MPI_FCPORT10_BASE_EXTID_MODDEF1     (0x01)
2087 #define MPI_FCPORT10_BASE_EXTID_MODDEF2     (0x02)
2088 #define MPI_FCPORT10_BASE_EXTID_MODDEF3     (0x03)
2089 #define MPI_FCPORT10_BASE_EXTID_SEEPROM     (0x04)
2090 #define MPI_FCPORT10_BASE_EXTID_MODDEF5     (0x05)
2091 #define MPI_FCPORT10_BASE_EXTID_MODDEF6     (0x06)
2092 #define MPI_FCPORT10_BASE_EXTID_MODDEF7     (0x07)
2093 #define MPI_FCPORT10_BASE_EXTID_VNDSPC_MASK (0x80)
2094
2095 #define MPI_FCPORT10_BASE_CONN_UNKNOWN      (0x00)
2096 #define MPI_FCPORT10_BASE_CONN_SC           (0x01)
2097 #define MPI_FCPORT10_BASE_CONN_COPPER1      (0x02)
2098 #define MPI_FCPORT10_BASE_CONN_COPPER2      (0x03)
2099 #define MPI_FCPORT10_BASE_CONN_BNC_TNC      (0x04)
2100 #define MPI_FCPORT10_BASE_CONN_COAXIAL      (0x05)
2101 #define MPI_FCPORT10_BASE_CONN_FIBERJACK    (0x06)
2102 #define MPI_FCPORT10_BASE_CONN_LC           (0x07)
2103 #define MPI_FCPORT10_BASE_CONN_MT_RJ        (0x08)
2104 #define MPI_FCPORT10_BASE_CONN_MU           (0x09)
2105 #define MPI_FCPORT10_BASE_CONN_SG           (0x0A)
2106 #define MPI_FCPORT10_BASE_CONN_OPT_PIGT     (0x0B)
2107 #define MPI_FCPORT10_BASE_CONN_RSV1_MIN     (0x0C)
2108 #define MPI_FCPORT10_BASE_CONN_RSV1_MAX     (0x1F)
2109 #define MPI_FCPORT10_BASE_CONN_HSSDC_II     (0x20)
2110 #define MPI_FCPORT10_BASE_CONN_CPR_PIGT     (0x21)
2111 #define MPI_FCPORT10_BASE_CONN_RSV2_MIN     (0x22)
2112 #define MPI_FCPORT10_BASE_CONN_RSV2_MAX     (0x7F)
2113 #define MPI_FCPORT10_BASE_CONN_VNDSPC_MASK  (0x80)
2114
2115 #define MPI_FCPORT10_BASE_ENCODE_UNSPEC     (0x00)
2116 #define MPI_FCPORT10_BASE_ENCODE_8B10B      (0x01)
2117 #define MPI_FCPORT10_BASE_ENCODE_4B5B       (0x02)
2118 #define MPI_FCPORT10_BASE_ENCODE_NRZ        (0x03)
2119 #define MPI_FCPORT10_BASE_ENCODE_MANCHESTER (0x04)
2120
2121
2122 typedef struct _CONFIG_PAGE_FC_PORT_10_EXTENDED_SFP_DATA
2123 {
2124     U8                      Options[2];                 /* 50h */
2125     U8                      BitRateMax;                 /* 52h */
2126     U8                      BitRateMin;                 /* 53h */
2127     U8                      VendorSN[16];               /* 54h */
2128     U8                      DateCode[8];                /* 64h */
2129     U8                      DiagMonitoringType;         /* 6Ch */
2130     U8                      EnhancedOptions;            /* 6Dh */
2131     U8                      SFF8472Compliance;          /* 6Eh */
2132     U8                      CC_EXT;                     /* 6Fh */
2133 } CONFIG_PAGE_FC_PORT_10_EXTENDED_SFP_DATA,
2134   MPI_POINTER PTR_CONFIG_PAGE_FC_PORT_10_EXTENDED_SFP_DATA,
2135   FCPortPage10ExtendedSfpData_t, MPI_POINTER pFCPortPage10ExtendedSfpData_t;
2136
2137 #define MPI_FCPORT10_EXT_OPTION1_RATESEL    (0x20)
2138 #define MPI_FCPORT10_EXT_OPTION1_TX_DISABLE (0x10)
2139 #define MPI_FCPORT10_EXT_OPTION1_TX_FAULT   (0x08)
2140 #define MPI_FCPORT10_EXT_OPTION1_LOS_INVERT (0x04)
2141 #define MPI_FCPORT10_EXT_OPTION1_LOS        (0x02)
2142
2143
2144 typedef struct _CONFIG_PAGE_FC_PORT_10
2145 {
2146     CONFIG_PAGE_HEADER                          Header;             /* 00h */
2147     U8                                          Flags;              /* 04h */
2148     U8                                          Reserved1;          /* 05h */
2149     U16                                         Reserved2;          /* 06h */
2150     U32                                         HwConfig1;          /* 08h */
2151     U32                                         HwConfig2;          /* 0Ch */
2152     CONFIG_PAGE_FC_PORT_10_BASE_SFP_DATA        Base;               /* 10h */
2153     CONFIG_PAGE_FC_PORT_10_EXTENDED_SFP_DATA    Extended;           /* 50h */
2154     U8                                          VendorSpecific[32]; /* 70h */
2155 } CONFIG_PAGE_FC_PORT_10, MPI_POINTER PTR_CONFIG_PAGE_FC_PORT_10,
2156   FCPortPage10_t, MPI_POINTER pFCPortPage10_t;
2157
2158 #define MPI_FCPORTPAGE10_PAGEVERSION                    (0x01)
2159
2160 /* standard MODDEF pin definitions (from GBIC spec.) */
2161 #define MPI_FCPORTPAGE10_FLAGS_MODDEF_MASK              (0x00000007)
2162 #define MPI_FCPORTPAGE10_FLAGS_MODDEF2                  (0x00000001)
2163 #define MPI_FCPORTPAGE10_FLAGS_MODDEF1                  (0x00000002)
2164 #define MPI_FCPORTPAGE10_FLAGS_MODDEF0                  (0x00000004)
2165 #define MPI_FCPORTPAGE10_FLAGS_MODDEF_NOGBIC            (0x00000007)
2166 #define MPI_FCPORTPAGE10_FLAGS_MODDEF_CPR_IEEE_CX       (0x00000006)
2167 #define MPI_FCPORTPAGE10_FLAGS_MODDEF_COPPER            (0x00000005)
2168 #define MPI_FCPORTPAGE10_FLAGS_MODDEF_OPTICAL_LW        (0x00000004)
2169 #define MPI_FCPORTPAGE10_FLAGS_MODDEF_SEEPROM           (0x00000003)
2170 #define MPI_FCPORTPAGE10_FLAGS_MODDEF_SW_OPTICAL        (0x00000002)
2171 #define MPI_FCPORTPAGE10_FLAGS_MODDEF_LX_IEEE_OPT_LW    (0x00000001)
2172 #define MPI_FCPORTPAGE10_FLAGS_MODDEF_SX_IEEE_OPT_SW    (0x00000000)
2173
2174 #define MPI_FCPORTPAGE10_FLAGS_CC_BASE_OK               (0x00000010)
2175 #define MPI_FCPORTPAGE10_FLAGS_CC_EXT_OK                (0x00000020)
2176
2177
2178 /****************************************************************************
2179 *   FC Device Config Pages
2180 ****************************************************************************/
2181
2182 typedef struct _CONFIG_PAGE_FC_DEVICE_0
2183 {
2184     CONFIG_PAGE_HEADER      Header;                     /* 00h */
2185     U64                     WWNN;                       /* 04h */
2186     U64                     WWPN;                       /* 0Ch */
2187     U32                     PortIdentifier;             /* 14h */
2188     U8                      Protocol;                   /* 18h */
2189     U8                      Flags;                      /* 19h */
2190     U16                     BBCredit;                   /* 1Ah */
2191     U16                     MaxRxFrameSize;             /* 1Ch */
2192     U8                      ADISCHardALPA;              /* 1Eh */
2193     U8                      PortNumber;                 /* 1Fh */
2194     U8                      FcPhLowestVersion;          /* 20h */
2195     U8                      FcPhHighestVersion;         /* 21h */
2196     U8                      CurrentTargetID;            /* 22h */
2197     U8                      CurrentBus;                 /* 23h */
2198 } CONFIG_PAGE_FC_DEVICE_0, MPI_POINTER PTR_CONFIG_PAGE_FC_DEVICE_0,
2199   FCDevicePage0_t, MPI_POINTER pFCDevicePage0_t;
2200
2201 #define MPI_FC_DEVICE_PAGE0_PAGEVERSION                 (0x03)
2202
2203 #define MPI_FC_DEVICE_PAGE0_FLAGS_TARGETID_BUS_VALID    (0x01)
2204 #define MPI_FC_DEVICE_PAGE0_FLAGS_PLOGI_INVALID         (0x02)
2205 #define MPI_FC_DEVICE_PAGE0_FLAGS_PRLI_INVALID          (0x04)
2206
2207 #define MPI_FC_DEVICE_PAGE0_PROT_IP                     (0x01)
2208 #define MPI_FC_DEVICE_PAGE0_PROT_FCP_TARGET             (0x02)
2209 #define MPI_FC_DEVICE_PAGE0_PROT_FCP_INITIATOR          (0x04)
2210 #define MPI_FC_DEVICE_PAGE0_PROT_FCP_RETRY              (0x08)
2211
2212 #define MPI_FC_DEVICE_PAGE0_PGAD_PORT_MASK      (MPI_FC_DEVICE_PGAD_PORT_MASK)
2213 #define MPI_FC_DEVICE_PAGE0_PGAD_FORM_MASK      (MPI_FC_DEVICE_PGAD_FORM_MASK)
2214 #define MPI_FC_DEVICE_PAGE0_PGAD_FORM_NEXT_DID  (MPI_FC_DEVICE_PGAD_FORM_NEXT_DID)
2215 #define MPI_FC_DEVICE_PAGE0_PGAD_FORM_BUS_TID   (MPI_FC_DEVICE_PGAD_FORM_BUS_TID)
2216 #define MPI_FC_DEVICE_PAGE0_PGAD_DID_MASK       (MPI_FC_DEVICE_PGAD_ND_DID_MASK)
2217 #define MPI_FC_DEVICE_PAGE0_PGAD_BUS_MASK       (MPI_FC_DEVICE_PGAD_BT_BUS_MASK)
2218 #define MPI_FC_DEVICE_PAGE0_PGAD_BUS_SHIFT      (MPI_FC_DEVICE_PGAD_BT_BUS_SHIFT)
2219 #define MPI_FC_DEVICE_PAGE0_PGAD_TID_MASK       (MPI_FC_DEVICE_PGAD_BT_TID_MASK)
2220
2221 #define MPI_FC_DEVICE_PAGE0_HARD_ALPA_UNKNOWN   (0xFF)
2222
2223 /****************************************************************************
2224 *   RAID Volume Config Pages
2225 ****************************************************************************/
2226
2227 typedef struct _RAID_VOL0_PHYS_DISK
2228 {
2229     U16                         Reserved;               /* 00h */
2230     U8                          PhysDiskMap;            /* 02h */
2231     U8                          PhysDiskNum;            /* 03h */
2232 } RAID_VOL0_PHYS_DISK, MPI_POINTER PTR_RAID_VOL0_PHYS_DISK,
2233   RaidVol0PhysDisk_t, MPI_POINTER pRaidVol0PhysDisk_t;
2234
2235 #define MPI_RAIDVOL0_PHYSDISK_PRIMARY                   (0x01)
2236 #define MPI_RAIDVOL0_PHYSDISK_SECONDARY                 (0x02)
2237
2238 typedef struct _RAID_VOL0_STATUS
2239 {
2240     U8                          Flags;                  /* 00h */
2241     U8                          State;                  /* 01h */
2242     U16                         Reserved;               /* 02h */
2243 } RAID_VOL0_STATUS, MPI_POINTER PTR_RAID_VOL0_STATUS,
2244   RaidVol0Status_t, MPI_POINTER pRaidVol0Status_t;
2245
2246 /* RAID Volume Page 0 VolumeStatus defines */
2247 #define MPI_RAIDVOL0_STATUS_FLAG_ENABLED                (0x01)
2248 #define MPI_RAIDVOL0_STATUS_FLAG_QUIESCED               (0x02)
2249 #define MPI_RAIDVOL0_STATUS_FLAG_RESYNC_IN_PROGRESS     (0x04)
2250 #define MPI_RAIDVOL0_STATUS_FLAG_VOLUME_INACTIVE        (0x08)
2251 #define MPI_RAIDVOL0_STATUS_FLAG_BAD_BLOCK_TABLE_FULL   (0x10)
2252
2253 #define MPI_RAIDVOL0_STATUS_STATE_OPTIMAL               (0x00)
2254 #define MPI_RAIDVOL0_STATUS_STATE_DEGRADED              (0x01)
2255 #define MPI_RAIDVOL0_STATUS_STATE_FAILED                (0x02)
2256 #define MPI_RAIDVOL0_STATUS_STATE_MISSING               (0x03)
2257
2258 typedef struct _RAID_VOL0_SETTINGS
2259 {
2260     U16                         Settings;       /* 00h */
2261     U8                          HotSparePool;   /* 01h */ /* MPI_RAID_HOT_SPARE_POOL_ */
2262     U8                          Reserved;       /* 02h */
2263 } RAID_VOL0_SETTINGS, MPI_POINTER PTR_RAID_VOL0_SETTINGS,
2264   RaidVol0Settings, MPI_POINTER pRaidVol0Settings;
2265
2266 /* RAID Volume Page 0 VolumeSettings defines */
2267 #define MPI_RAIDVOL0_SETTING_WRITE_CACHING_ENABLE       (0x0001)
2268 #define MPI_RAIDVOL0_SETTING_OFFLINE_ON_SMART           (0x0002)
2269 #define MPI_RAIDVOL0_SETTING_AUTO_CONFIGURE             (0x0004)
2270 #define MPI_RAIDVOL0_SETTING_PRIORITY_RESYNC            (0x0008)
2271 #define MPI_RAIDVOL0_SETTING_FAST_DATA_SCRUBBING_0102   (0x0020) /* obsolete */
2272
2273 #define MPI_RAIDVOL0_SETTING_MASK_METADATA_SIZE         (0x00C0)
2274 #define MPI_RAIDVOL0_SETTING_64MB_METADATA_SIZE         (0x0000)
2275 #define MPI_RAIDVOL0_SETTING_512MB_METADATA_SIZE        (0x0040)
2276
2277 #define MPI_RAIDVOL0_SETTING_USE_PRODUCT_ID_SUFFIX      (0x0010)
2278 #define MPI_RAIDVOL0_SETTING_USE_DEFAULTS               (0x8000)
2279
2280 /* RAID Volume Page 0 HotSparePool defines, also used in RAID Physical Disk */
2281 #define MPI_RAID_HOT_SPARE_POOL_0                       (0x01)
2282 #define MPI_RAID_HOT_SPARE_POOL_1                       (0x02)
2283 #define MPI_RAID_HOT_SPARE_POOL_2                       (0x04)
2284 #define MPI_RAID_HOT_SPARE_POOL_3                       (0x08)
2285 #define MPI_RAID_HOT_SPARE_POOL_4                       (0x10)
2286 #define MPI_RAID_HOT_SPARE_POOL_5                       (0x20)
2287 #define MPI_RAID_HOT_SPARE_POOL_6                       (0x40)
2288 #define MPI_RAID_HOT_SPARE_POOL_7                       (0x80)
2289
2290 /*
2291  * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
2292  * one and check Header.PageLength at runtime.
2293  */
2294 #ifndef MPI_RAID_VOL_PAGE_0_PHYSDISK_MAX
2295 #define MPI_RAID_VOL_PAGE_0_PHYSDISK_MAX        (1)
2296 #endif
2297
2298 typedef struct _CONFIG_PAGE_RAID_VOL_0
2299 {
2300     CONFIG_PAGE_HEADER      Header;         /* 00h */
2301     U8                      VolumeID;       /* 04h */
2302     U8                      VolumeBus;      /* 05h */
2303     U8                      VolumeIOC;      /* 06h */
2304     U8                      VolumeType;     /* 07h */ /* MPI_RAID_VOL_TYPE_ */
2305     RAID_VOL0_STATUS        VolumeStatus;   /* 08h */
2306     RAID_VOL0_SETTINGS      VolumeSettings; /* 0Ch */
2307     U32                     MaxLBA;         /* 10h */
2308     U32                     MaxLBAHigh;     /* 14h */
2309     U32                     StripeSize;     /* 18h */
2310     U32                     Reserved2;      /* 1Ch */
2311     U32                     Reserved3;      /* 20h */
2312     U8                      NumPhysDisks;   /* 24h */
2313     U8                      DataScrubRate;  /* 25h */
2314     U8                      ResyncRate;     /* 26h */
2315     U8                      InactiveStatus; /* 27h */
2316     RAID_VOL0_PHYS_DISK     PhysDisk[MPI_RAID_VOL_PAGE_0_PHYSDISK_MAX];/* 28h */
2317 } CONFIG_PAGE_RAID_VOL_0, MPI_POINTER PTR_CONFIG_PAGE_RAID_VOL_0,
2318   RaidVolumePage0_t, MPI_POINTER pRaidVolumePage0_t;
2319
2320 #define MPI_RAIDVOLPAGE0_PAGEVERSION                    (0x07)
2321
2322 /* values for RAID Volume Page 0 InactiveStatus field */
2323 #define MPI_RAIDVOLPAGE0_UNKNOWN_INACTIVE               (0x00)
2324 #define MPI_RAIDVOLPAGE0_STALE_METADATA_INACTIVE        (0x01)
2325 #define MPI_RAIDVOLPAGE0_FOREIGN_VOLUME_INACTIVE        (0x02)
2326 #define MPI_RAIDVOLPAGE0_INSUFFICIENT_RESOURCE_INACTIVE (0x03)
2327 #define MPI_RAIDVOLPAGE0_CLONE_VOLUME_INACTIVE          (0x04)
2328 #define MPI_RAIDVOLPAGE0_INSUFFICIENT_METADATA_INACTIVE (0x05)
2329 #define MPI_RAIDVOLPAGE0_PREVIOUSLY_DELETED             (0x06)
2330
2331
2332 typedef struct _CONFIG_PAGE_RAID_VOL_1
2333 {
2334     CONFIG_PAGE_HEADER      Header;         /* 00h */
2335     U8                      VolumeID;       /* 04h */
2336     U8                      VolumeBus;      /* 05h */
2337     U8                      VolumeIOC;      /* 06h */
2338     U8                      Reserved0;      /* 07h */
2339     U8                      GUID[24];       /* 08h */
2340     U8                      Name[32];       /* 20h */
2341     U64                     WWID;           /* 40h */
2342     U32                     Reserved1;      /* 48h */
2343     U32                     Reserved2;      /* 4Ch */
2344 } CONFIG_PAGE_RAID_VOL_1, MPI_POINTER PTR_CONFIG_PAGE_RAID_VOL_1,
2345   RaidVolumePage1_t, MPI_POINTER pRaidVolumePage1_t;
2346
2347 #define MPI_RAIDVOLPAGE1_PAGEVERSION                    (0x01)
2348
2349
2350 /****************************************************************************
2351 *   RAID Physical Disk Config Pages
2352 ****************************************************************************/
2353
2354 typedef struct _RAID_PHYS_DISK0_ERROR_DATA
2355 {
2356     U8                      ErrorCdbByte;               /* 00h */
2357     U8                      ErrorSenseKey;              /* 01h */
2358     U16                     Reserved;                   /* 02h */
2359     U16                     ErrorCount;                 /* 04h */
2360     U8                      ErrorASC;                   /* 06h */
2361     U8                      ErrorASCQ;                  /* 07h */
2362     U16                     SmartCount;                 /* 08h */
2363     U8                      SmartASC;                   /* 0Ah */
2364     U8                      SmartASCQ;                  /* 0Bh */
2365 } RAID_PHYS_DISK0_ERROR_DATA, MPI_POINTER PTR_RAID_PHYS_DISK0_ERROR_DATA,
2366   RaidPhysDisk0ErrorData_t, MPI_POINTER pRaidPhysDisk0ErrorData_t;
2367
2368 typedef struct _RAID_PHYS_DISK_INQUIRY_DATA
2369 {
2370     U8                          VendorID[8];            /* 00h */
2371     U8                          ProductID[16];          /* 08h */
2372     U8                          ProductRevLevel[4];     /* 18h */
2373     U8                          Info[32];               /* 1Ch */
2374 } RAID_PHYS_DISK0_INQUIRY_DATA, MPI_POINTER PTR_RAID_PHYS_DISK0_INQUIRY_DATA,
2375   RaidPhysDisk0InquiryData, MPI_POINTER pRaidPhysDisk0InquiryData;
2376
2377 typedef struct _RAID_PHYS_DISK0_SETTINGS
2378 {
2379     U8              SepID;              /* 00h */
2380     U8              SepBus;             /* 01h */
2381     U8              HotSparePool;       /* 02h */ /* MPI_RAID_HOT_SPARE_POOL_ */
2382     U8              PhysDiskSettings;   /* 03h */
2383 } RAID_PHYS_DISK0_SETTINGS, MPI_POINTER PTR_RAID_PHYS_DISK0_SETTINGS,
2384   RaidPhysDiskSettings_t, MPI_POINTER pRaidPhysDiskSettings_t;
2385
2386 typedef struct _RAID_PHYS_DISK0_STATUS
2387 {
2388     U8                              Flags;              /* 00h */
2389     U8                              State;              /* 01h */
2390     U16                             Reserved;           /* 02h */
2391 } RAID_PHYS_DISK0_STATUS, MPI_POINTER PTR_RAID_PHYS_DISK0_STATUS,
2392   RaidPhysDiskStatus_t, MPI_POINTER pRaidPhysDiskStatus_t;
2393
2394 /* RAID Physical Disk PhysDiskStatus flags */
2395
2396 #define MPI_PHYSDISK0_STATUS_FLAG_OUT_OF_SYNC           (0x01)
2397 #define MPI_PHYSDISK0_STATUS_FLAG_QUIESCED              (0x02)
2398 #define MPI_PHYSDISK0_STATUS_FLAG_INACTIVE_VOLUME       (0x04)
2399 #define MPI_PHYSDISK0_STATUS_FLAG_OPTIMAL_PREVIOUS      (0x00)
2400 #define MPI_PHYSDISK0_STATUS_FLAG_NOT_OPTIMAL_PREVIOUS  (0x08)
2401
2402 #define MPI_PHYSDISK0_STATUS_ONLINE                     (0x00)
2403 #define MPI_PHYSDISK0_STATUS_MISSING                    (0x01)
2404 #define MPI_PHYSDISK0_STATUS_NOT_COMPATIBLE             (0x02)
2405 #define MPI_PHYSDISK0_STATUS_FAILED                     (0x03)
2406 #define MPI_PHYSDISK0_STATUS_INITIALIZING               (0x04)
2407 #define MPI_PHYSDISK0_STATUS_OFFLINE_REQUESTED          (0x05)
2408 #define MPI_PHYSDISK0_STATUS_FAILED_REQUESTED           (0x06)
2409 #define MPI_PHYSDISK0_STATUS_OTHER_OFFLINE              (0xFF)
2410
2411 typedef struct _CONFIG_PAGE_RAID_PHYS_DISK_0
2412 {
2413     CONFIG_PAGE_HEADER              Header;             /* 00h */
2414     U8                              PhysDiskID;         /* 04h */
2415     U8                              PhysDiskBus;        /* 05h */
2416     U8                              PhysDiskIOC;        /* 06h */
2417     U8                              PhysDiskNum;        /* 07h */
2418     RAID_PHYS_DISK0_SETTINGS        PhysDiskSettings;   /* 08h */
2419     U32                             Reserved1;          /* 0Ch */
2420     U8                              ExtDiskIdentifier[8]; /* 10h */
2421     U8                              DiskIdentifier[16]; /* 18h */
2422     RAID_PHYS_DISK0_INQUIRY_DATA    InquiryData;        /* 28h */
2423     RAID_PHYS_DISK0_STATUS          PhysDiskStatus;     /* 64h */
2424     U32                             MaxLBA;             /* 68h */
2425     RAID_PHYS_DISK0_ERROR_DATA      ErrorData;          /* 6Ch */
2426 } CONFIG_PAGE_RAID_PHYS_DISK_0, MPI_POINTER PTR_CONFIG_PAGE_RAID_PHYS_DISK_0,
2427   RaidPhysDiskPage0_t, MPI_POINTER pRaidPhysDiskPage0_t;
2428
2429 #define MPI_RAIDPHYSDISKPAGE0_PAGEVERSION           (0x02)
2430
2431
2432 typedef struct _RAID_PHYS_DISK1_PATH
2433 {
2434     U8                              PhysDiskID;         /* 00h */
2435     U8                              PhysDiskBus;        /* 01h */
2436     U16                             Reserved1;          /* 02h */
2437     U64                             WWID;               /* 04h */
2438     U64                             OwnerWWID;          /* 0Ch */
2439     U8                              OwnerIdentifier;    /* 14h */
2440     U8                              Reserved2;          /* 15h */
2441     U16                             Flags;              /* 16h */
2442 } RAID_PHYS_DISK1_PATH, MPI_POINTER PTR_RAID_PHYS_DISK1_PATH,
2443   RaidPhysDisk1Path_t, MPI_POINTER pRaidPhysDisk1Path_t;
2444
2445 /* RAID Physical Disk Page 1 Flags field defines */
2446 #define MPI_RAID_PHYSDISK1_FLAG_BROKEN          (0x0002)
2447 #define MPI_RAID_PHYSDISK1_FLAG_INVALID         (0x0001)
2448
2449 typedef struct _CONFIG_PAGE_RAID_PHYS_DISK_1
2450 {
2451     CONFIG_PAGE_HEADER              Header;             /* 00h */
2452     U8                              NumPhysDiskPaths;   /* 04h */
2453     U8                              PhysDiskNum;        /* 05h */
2454     U16                             Reserved2;          /* 06h */
2455     U32                             Reserved1;          /* 08h */
2456     RAID_PHYS_DISK1_PATH            Path[1];            /* 0Ch */
2457 } CONFIG_PAGE_RAID_PHYS_DISK_1, MPI_POINTER PTR_CONFIG_PAGE_RAID_PHYS_DISK_1,
2458   RaidPhysDiskPage1_t, MPI_POINTER pRaidPhysDiskPage1_t;
2459
2460 #define MPI_RAIDPHYSDISKPAGE1_PAGEVERSION       (0x00)
2461
2462
2463 /****************************************************************************
2464 *   LAN Config Pages
2465 ****************************************************************************/
2466
2467 typedef struct _CONFIG_PAGE_LAN_0
2468 {
2469     ConfigPageHeader_t      Header;                     /* 00h */
2470     U16                     TxRxModes;                  /* 04h */
2471     U16                     Reserved;                   /* 06h */
2472     U32                     PacketPrePad;               /* 08h */
2473 } CONFIG_PAGE_LAN_0, MPI_POINTER PTR_CONFIG_PAGE_LAN_0,
2474   LANPage0_t, MPI_POINTER pLANPage0_t;
2475
2476 #define MPI_LAN_PAGE0_PAGEVERSION                       (0x01)
2477
2478 #define MPI_LAN_PAGE0_RETURN_LOOPBACK                   (0x0000)
2479 #define MPI_LAN_PAGE0_SUPPRESS_LOOPBACK                 (0x0001)
2480 #define MPI_LAN_PAGE0_LOOPBACK_MASK                     (0x0001)
2481
2482 typedef struct _CONFIG_PAGE_LAN_1
2483 {
2484     ConfigPageHeader_t      Header;                     /* 00h */
2485     U16                     Reserved;                   /* 04h */
2486     U8                      CurrentDeviceState;         /* 06h */
2487     U8                      Reserved1;                  /* 07h */
2488     U32                     MinPacketSize;              /* 08h */
2489     U32                     MaxPacketSize;              /* 0Ch */
2490     U32                     HardwareAddressLow;         /* 10h */
2491     U32                     HardwareAddressHigh;        /* 14h */
2492     U32                     MaxWireSpeedLow;            /* 18h */
2493     U32                     MaxWireSpeedHigh;           /* 1Ch */
2494     U32                     BucketsRemaining;           /* 20h */
2495     U32                     MaxReplySize;               /* 24h */
2496     U32                     NegWireSpeedLow;            /* 28h */
2497     U32                     NegWireSpeedHigh;           /* 2Ch */
2498 } CONFIG_PAGE_LAN_1, MPI_POINTER PTR_CONFIG_PAGE_LAN_1,
2499   LANPage1_t, MPI_POINTER pLANPage1_t;
2500
2501 #define MPI_LAN_PAGE1_PAGEVERSION                       (0x03)
2502
2503 #define MPI_LAN_PAGE1_DEV_STATE_RESET                   (0x00)
2504 #define MPI_LAN_PAGE1_DEV_STATE_OPERATIONAL             (0x01)
2505
2506
2507 /****************************************************************************
2508 *   Inband Config Pages
2509 ****************************************************************************/
2510
2511 typedef struct _CONFIG_PAGE_INBAND_0
2512 {
2513     CONFIG_PAGE_HEADER      Header;                     /* 00h */
2514     MPI_VERSION_FORMAT      InbandVersion;              /* 04h */
2515     U16                     MaximumBuffers;             /* 08h */
2516     U16                     Reserved1;                  /* 0Ah */
2517 } CONFIG_PAGE_INBAND_0, MPI_POINTER PTR_CONFIG_PAGE_INBAND_0,
2518   InbandPage0_t, MPI_POINTER pInbandPage0_t;
2519
2520 #define MPI_INBAND_PAGEVERSION          (0x00)
2521
2522
2523
2524 /****************************************************************************
2525 *   SAS IO Unit Config Pages
2526 ****************************************************************************/
2527
2528 typedef struct _MPI_SAS_IO_UNIT0_PHY_DATA
2529 {
2530     U8          Port;                   /* 00h */
2531     U8          PortFlags;              /* 01h */
2532     U8          PhyFlags;               /* 02h */
2533     U8          NegotiatedLinkRate;     /* 03h */
2534     U32         ControllerPhyDeviceInfo;/* 04h */
2535     U16         AttachedDeviceHandle;   /* 08h */
2536     U16         ControllerDevHandle;    /* 0Ah */
2537     U32         DiscoveryStatus;        /* 0Ch */
2538 } MPI_SAS_IO_UNIT0_PHY_DATA, MPI_POINTER PTR_MPI_SAS_IO_UNIT0_PHY_DATA,
2539   SasIOUnit0PhyData, MPI_POINTER pSasIOUnit0PhyData;
2540
2541 /*
2542  * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
2543  * one and check Header.PageLength at runtime.
2544  */
2545 #ifndef MPI_SAS_IOUNIT0_PHY_MAX
2546 #define MPI_SAS_IOUNIT0_PHY_MAX         (1)
2547 #endif
2548
2549 typedef struct _CONFIG_PAGE_SAS_IO_UNIT_0
2550 {
2551     CONFIG_EXTENDED_PAGE_HEADER     Header;                             /* 00h */
2552     U16                             NvdataVersionDefault;               /* 08h */
2553     U16                             NvdataVersionPersistent;            /* 0Ah */
2554     U8                              NumPhys;                            /* 0Ch */
2555     U8                              Reserved2;                          /* 0Dh */
2556     U16                             Reserved3;                          /* 0Eh */
2557     MPI_SAS_IO_UNIT0_PHY_DATA       PhyData[MPI_SAS_IOUNIT0_PHY_MAX];   /* 10h */
2558 } CONFIG_PAGE_SAS_IO_UNIT_0, MPI_POINTER PTR_CONFIG_PAGE_SAS_IO_UNIT_0,
2559   SasIOUnitPage0_t, MPI_POINTER pSasIOUnitPage0_t;
2560
2561 #define MPI_SASIOUNITPAGE0_PAGEVERSION      (0x04)
2562
2563 /* values for SAS IO Unit Page 0 PortFlags */
2564 #define MPI_SAS_IOUNIT0_PORT_FLAGS_DISCOVERY_IN_PROGRESS    (0x08)
2565 #define MPI_SAS_IOUNIT0_PORT_FLAGS_0_TARGET_IOC_NUM         (0x00)
2566 #define MPI_SAS_IOUNIT0_PORT_FLAGS_1_TARGET_IOC_NUM         (0x04)
2567 #define MPI_SAS_IOUNIT0_PORT_FLAGS_AUTO_PORT_CONFIG         (0x01)
2568
2569 /* values for SAS IO Unit Page 0 PhyFlags */
2570 #define MPI_SAS_IOUNIT0_PHY_FLAGS_PHY_DISABLED              (0x04)
2571 #define MPI_SAS_IOUNIT0_PHY_FLAGS_TX_INVERT                 (0x02)
2572 #define MPI_SAS_IOUNIT0_PHY_FLAGS_RX_INVERT                 (0x01)
2573
2574 /* values for SAS IO Unit Page 0 NegotiatedLinkRate */
2575 #define MPI_SAS_IOUNIT0_RATE_UNKNOWN                        (0x00)
2576 #define MPI_SAS_IOUNIT0_RATE_PHY_DISABLED                   (0x01)
2577 #define MPI_SAS_IOUNIT0_RATE_FAILED_SPEED_NEGOTIATION       (0x02)
2578 #define MPI_SAS_IOUNIT0_RATE_SATA_OOB_COMPLETE              (0x03)
2579 #define MPI_SAS_IOUNIT0_RATE_1_5                            (0x08)
2580 #define MPI_SAS_IOUNIT0_RATE_3_0                            (0x09)
2581
2582 /* see mpi_sas.h for values for SAS IO Unit Page 0 ControllerPhyDeviceInfo values */
2583
2584 /* values for SAS IO Unit Page 0 DiscoveryStatus */
2585 #define MPI_SAS_IOUNIT0_DS_LOOP_DETECTED                    (0x00000001)
2586 #define MPI_SAS_IOUNIT0_DS_UNADDRESSABLE_DEVICE             (0x00000002)
2587 #define MPI_SAS_IOUNIT0_DS_MULTIPLE_PORTS                   (0x00000004)
2588 #define MPI_SAS_IOUNIT0_DS_EXPANDER_ERR                     (0x00000008)
2589 #define MPI_SAS_IOUNIT0_DS_SMP_TIMEOUT                      (0x00000010)
2590 #define MPI_SAS_IOUNIT0_DS_OUT_ROUTE_ENTRIES                (0x00000020)
2591 #define MPI_SAS_IOUNIT0_DS_INDEX_NOT_EXIST                  (0x00000040)
2592 #define MPI_SAS_IOUNIT0_DS_SMP_FUNCTION_FAILED              (0x00000080)
2593 #define MPI_SAS_IOUNIT0_DS_SMP_CRC_ERROR                    (0x00000100)
2594 #define MPI_SAS_IOUNIT0_DS_SUBTRACTIVE_LINK                 (0x00000200)
2595 #define MPI_SAS_IOUNIT0_DS_TABLE_LINK                       (0x00000400)
2596 #define MPI_SAS_IOUNIT0_DS_UNSUPPORTED_DEVICE               (0x00000800)
2597 #define MPI_SAS_IOUNIT0_DS_MAX_SATA_TARGETS                 (0x00001000)
2598 #define MPI_SAS_IOUNIT0_DS_MULTI_PORT_DOMAIN                (0x00002000)
2599
2600
2601 typedef struct _MPI_SAS_IO_UNIT1_PHY_DATA
2602 {
2603     U8          Port;                       /* 00h */
2604     U8          PortFlags;                  /* 01h */
2605     U8          PhyFlags;                   /* 02h */
2606     U8          MaxMinLinkRate;             /* 03h */
2607     U32         ControllerPhyDeviceInfo;    /* 04h */
2608     U16         MaxTargetPortConnectTime;   /* 08h */
2609     U16         Reserved1;                  /* 0Ah */
2610 } MPI_SAS_IO_UNIT1_PHY_DATA, MPI_POINTER PTR_MPI_SAS_IO_UNIT1_PHY_DATA,
2611   SasIOUnit1PhyData, MPI_POINTER pSasIOUnit1PhyData;
2612
2613 /*
2614  * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
2615  * one and check Header.PageLength at runtime.
2616  */
2617 #ifndef MPI_SAS_IOUNIT1_PHY_MAX
2618 #define MPI_SAS_IOUNIT1_PHY_MAX         (1)
2619 #endif
2620
2621 typedef struct _CONFIG_PAGE_SAS_IO_UNIT_1
2622 {
2623     CONFIG_EXTENDED_PAGE_HEADER Header;                             /* 00h */
2624     U16                         ControlFlags;                       /* 08h */
2625     U16                         MaxNumSATATargets;                  /* 0Ah */
2626     U16                         AdditionalControlFlags;             /* 0Ch */
2627     U16                         Reserved1;                          /* 0Eh */
2628     U8                          NumPhys;                            /* 10h */
2629     U8                          SATAMaxQDepth;                      /* 11h */
2630     U8                          ReportDeviceMissingDelay;           /* 12h */
2631     U8                          IODeviceMissingDelay;               /* 13h */
2632     MPI_SAS_IO_UNIT1_PHY_DATA   PhyData[MPI_SAS_IOUNIT1_PHY_MAX];   /* 14h */
2633 } CONFIG_PAGE_SAS_IO_UNIT_1, MPI_POINTER PTR_CONFIG_PAGE_SAS_IO_UNIT_1,
2634   SasIOUnitPage1_t, MPI_POINTER pSasIOUnitPage1_t;
2635
2636 #define MPI_SASIOUNITPAGE1_PAGEVERSION      (0x07)
2637
2638 /* values for SAS IO Unit Page 1 ControlFlags */
2639 #define MPI_SAS_IOUNIT1_CONTROL_DEVICE_SELF_TEST            (0x8000)
2640 #define MPI_SAS_IOUNIT1_CONTROL_SATA_3_0_MAX                (0x4000)
2641 #define MPI_SAS_IOUNIT1_CONTROL_SATA_1_5_MAX                (0x2000)
2642 #define MPI_SAS_IOUNIT1_CONTROL_SATA_SW_PRESERVE            (0x1000)
2643 #define MPI_SAS_IOUNIT1_CONTROL_DISABLE_SAS_HASH            (0x0800)
2644
2645 #define MPI_SAS_IOUNIT1_CONTROL_MASK_DEV_SUPPORT            (0x0600)
2646 #define MPI_SAS_IOUNIT1_CONTROL_SHIFT_DEV_SUPPORT           (9)
2647 #define MPI_SAS_IOUNIT1_CONTROL_DEV_SUPPORT_BOTH            (0x00)
2648 #define MPI_SAS_IOUNIT1_CONTROL_DEV_SAS_SUPPORT             (0x01)
2649 #define MPI_SAS_IOUNIT1_CONTROL_DEV_SATA_SUPPORT            (0x02)
2650
2651 #define MPI_SAS_IOUNIT1_CONTROL_POSTPONE_SATA_INIT          (0x0100)
2652 #define MPI_SAS_IOUNIT1_CONTROL_SATA_48BIT_LBA_REQUIRED     (0x0080)
2653 #define MPI_SAS_IOUNIT1_CONTROL_SATA_SMART_REQUIRED         (0x0040)
2654 #define MPI_SAS_IOUNIT1_CONTROL_SATA_NCQ_REQUIRED           (0x0020)
2655 #define MPI_SAS_IOUNIT1_CONTROL_SATA_FUA_REQUIRED           (0x0010)
2656 #define MPI_SAS_IOUNIT1_CONTROL_PHY_ENABLE_ORDER_HIGH       (0x0008)
2657 #define MPI_SAS_IOUNIT1_CONTROL_SUBTRACTIVE_ILLEGAL         (0x0004)
2658 #define MPI_SAS_IOUNIT1_CONTROL_FIRST_LVL_DISC_ONLY         (0x0002)
2659 #define MPI_SAS_IOUNIT1_CONTROL_CLEAR_AFFILIATION           (0x0001)
2660
2661 /* values for SAS IO Unit Page 1 AdditionalControlFlags */
2662 #define MPI_SAS_IOUNIT1_ACONTROL_MULTI_PORT_DOMAIN_ILLEGAL          (0x0080)
2663 #define MPI_SAS_IOUNIT1_ACONTROL_SATA_ASYNCHROUNOUS_NOTIFICATION    (0x0040)
2664 #define MPI_SAS_IOUNIT1_ACONTROL_HIDE_NONZERO_ATTACHED_PHY_IDENT    (0x0020)
2665 #define MPI_SAS_IOUNIT1_ACONTROL_PORT_ENABLE_ONLY_SATA_LINK_RESET   (0x0010)
2666 #define MPI_SAS_IOUNIT1_ACONTROL_OTHER_AFFILIATION_SATA_LINK_RESET  (0x0008)
2667 #define MPI_SAS_IOUNIT1_ACONTROL_SELF_AFFILIATION_SATA_LINK_RESET   (0x0004)
2668 #define MPI_SAS_IOUNIT1_ACONTROL_NO_AFFILIATION_SATA_LINK_RESET     (0x0002)
2669 #define MPI_SAS_IOUNIT1_ACONTROL_ALLOW_TABLE_TO_TABLE               (0x0001)
2670
2671 /* defines for SAS IO Unit Page 1 ReportDeviceMissingDelay */
2672 #define MPI_SAS_IOUNIT1_REPORT_MISSING_TIMEOUT_MASK         (0x7F)
2673 #define MPI_SAS_IOUNIT1_REPORT_MISSING_UNIT_16              (0x80)
2674
2675 /* values for SAS IO Unit Page 1 PortFlags */
2676 #define MPI_SAS_IOUNIT1_PORT_FLAGS_0_TARGET_IOC_NUM         (0x00)
2677 #define MPI_SAS_IOUNIT1_PORT_FLAGS_1_TARGET_IOC_NUM         (0x04)
2678 #define MPI_SAS_IOUNIT1_PORT_FLAGS_AUTO_PORT_CONFIG         (0x01)
2679
2680 /* values for SAS IO Unit Page 0 PhyFlags */
2681 #define MPI_SAS_IOUNIT1_PHY_FLAGS_PHY_DISABLE               (0x04)
2682 #define MPI_SAS_IOUNIT1_PHY_FLAGS_TX_INVERT                 (0x02)
2683 #define MPI_SAS_IOUNIT1_PHY_FLAGS_RX_INVERT                 (0x01)
2684
2685 /* values for SAS IO Unit Page 0 MaxMinLinkRate */
2686 #define MPI_SAS_IOUNIT1_MAX_RATE_MASK                       (0xF0)
2687 #define MPI_SAS_IOUNIT1_MAX_RATE_1_5                        (0x80)
2688 #define MPI_SAS_IOUNIT1_MAX_RATE_3_0                        (0x90)
2689 #define MPI_SAS_IOUNIT1_MIN_RATE_MASK                       (0x0F)
2690 #define MPI_SAS_IOUNIT1_MIN_RATE_1_5                        (0x08)
2691 #define MPI_SAS_IOUNIT1_MIN_RATE_3_0                        (0x09)
2692
2693 /* see mpi_sas.h for values for SAS IO Unit Page 1 ControllerPhyDeviceInfo values */
2694
2695
2696 typedef struct _CONFIG_PAGE_SAS_IO_UNIT_2
2697 {
2698     CONFIG_EXTENDED_PAGE_HEADER         Header;                 /* 00h */
2699     U8                                  NumDevsPerEnclosure;    /* 08h */
2700     U8                                  Reserved1;              /* 09h */
2701     U16                                 Reserved2;              /* 0Ah */
2702     U16                                 MaxPersistentIDs;       /* 0Ch */
2703     U16                                 NumPersistentIDsUsed;   /* 0Eh */
2704     U8                                  Status;                 /* 10h */
2705     U8                                  Flags;                  /* 11h */
2706     U16                                 MaxNumPhysicalMappedIDs;/* 12h */
2707 } CONFIG_PAGE_SAS_IO_UNIT_2, MPI_POINTER PTR_CONFIG_PAGE_SAS_IO_UNIT_2,
2708   SasIOUnitPage2_t, MPI_POINTER pSasIOUnitPage2_t;
2709
2710 #define MPI_SASIOUNITPAGE2_PAGEVERSION      (0x06)
2711
2712 /* values for SAS IO Unit Page 2 Status field */
2713 #define MPI_SAS_IOUNIT2_STATUS_DEVICE_LIMIT_EXCEEDED        (0x08)
2714 #define MPI_SAS_IOUNIT2_STATUS_ENCLOSURE_DEVICES_UNMAPPED   (0x04)
2715 #define MPI_SAS_IOUNIT2_STATUS_DISABLED_PERSISTENT_MAPPINGS (0x02)
2716 #define MPI_SAS_IOUNIT2_STATUS_FULL_PERSISTENT_MAPPINGS     (0x01)
2717
2718 /* values for SAS IO Unit Page 2 Flags field */
2719 #define MPI_SAS_IOUNIT2_FLAGS_DISABLE_PERSISTENT_MAPPINGS   (0x01)
2720 /* Physical Mapping Modes */
2721 #define MPI_SAS_IOUNIT2_FLAGS_MASK_PHYS_MAP_MODE            (0x0E)
2722 #define MPI_SAS_IOUNIT2_FLAGS_SHIFT_PHYS_MAP_MODE           (1)
2723 #define MPI_SAS_IOUNIT2_FLAGS_NO_PHYS_MAP                   (0x00)
2724 #define MPI_SAS_IOUNIT2_FLAGS_DIRECT_ATTACH_PHYS_MAP        (0x01)
2725 #define MPI_SAS_IOUNIT2_FLAGS_ENCLOSURE_SLOT_PHYS_MAP       (0x02)
2726 #define MPI_SAS_IOUNIT2_FLAGS_HOST_ASSIGNED_PHYS_MAP        (0x07)
2727
2728 #define MPI_SAS_IOUNIT2_FLAGS_RESERVE_ID_0_FOR_BOOT         (0x10)
2729 #define MPI_SAS_IOUNIT2_FLAGS_DA_STARTING_SLOT              (0x20)
2730
2731
2732 typedef struct _CONFIG_PAGE_SAS_IO_UNIT_3
2733 {
2734     CONFIG_EXTENDED_PAGE_HEADER Header;                         /* 00h */
2735     U32                         Reserved1;                      /* 08h */
2736     U32                         MaxInvalidDwordCount;           /* 0Ch */
2737     U32                         InvalidDwordCountTime;          /* 10h */
2738     U32                         MaxRunningDisparityErrorCount;  /* 14h */
2739     U32                         RunningDisparityErrorTime;      /* 18h */
2740     U32                         MaxLossDwordSynchCount;         /* 1Ch */
2741     U32                         LossDwordSynchCountTime;        /* 20h */
2742     U32                         MaxPhyResetProblemCount;        /* 24h */
2743     U32                         PhyResetProblemTime;            /* 28h */
2744 } CONFIG_PAGE_SAS_IO_UNIT_3, MPI_POINTER PTR_CONFIG_PAGE_SAS_IO_UNIT_3,
2745   SasIOUnitPage3_t, MPI_POINTER pSasIOUnitPage3_t;
2746
2747 #define MPI_SASIOUNITPAGE3_PAGEVERSION      (0x00)
2748
2749
2750 /****************************************************************************
2751 *   SAS Expander Config Pages
2752 ****************************************************************************/
2753
2754 typedef struct _CONFIG_PAGE_SAS_EXPANDER_0
2755 {
2756     CONFIG_EXTENDED_PAGE_HEADER         Header;                 /* 00h */
2757     U8                                  PhysicalPort;           /* 08h */
2758     U8                                  Reserved1;              /* 09h */
2759     U16                                 EnclosureHandle;        /* 0Ah */
2760     U64                                 SASAddress;             /* 0Ch */
2761     U32                                 DiscoveryStatus;        /* 14h */
2762     U16                                 DevHandle;              /* 18h */
2763     U16                                 ParentDevHandle;        /* 1Ah */
2764     U16                                 ExpanderChangeCount;    /* 1Ch */
2765     U16                                 ExpanderRouteIndexes;   /* 1Eh */
2766     U8                                  NumPhys;                /* 20h */
2767     U8                                  SASLevel;               /* 21h */
2768     U8                                  Flags;                  /* 22h */
2769     U8                                  Reserved3;              /* 23h */
2770 } CONFIG_PAGE_SAS_EXPANDER_0, MPI_POINTER PTR_CONFIG_PAGE_SAS_EXPANDER_0,
2771   SasExpanderPage0_t, MPI_POINTER pSasExpanderPage0_t;
2772
2773 #define MPI_SASEXPANDER0_PAGEVERSION        (0x03)
2774
2775 /* values for SAS Expander Page 0 DiscoveryStatus field */
2776 #define MPI_SAS_EXPANDER0_DS_LOOP_DETECTED              (0x00000001)
2777 #define MPI_SAS_EXPANDER0_DS_UNADDRESSABLE_DEVICE       (0x00000002)
2778 #define MPI_SAS_EXPANDER0_DS_MULTIPLE_PORTS             (0x00000004)
2779 #define MPI_SAS_EXPANDER0_DS_EXPANDER_ERR               (0x00000008)
2780 #define MPI_SAS_EXPANDER0_DS_SMP_TIMEOUT                (0x00000010)
2781 #define MPI_SAS_EXPANDER0_DS_OUT_ROUTE_ENTRIES          (0x00000020)
2782 #define MPI_SAS_EXPANDER0_DS_INDEX_NOT_EXIST            (0x00000040)
2783 #define MPI_SAS_EXPANDER0_DS_SMP_FUNCTION_FAILED        (0x00000080)
2784 #define MPI_SAS_EXPANDER0_DS_SMP_CRC_ERROR              (0x00000100)
2785 #define MPI_SAS_EXPANDER0_DS_SUBTRACTIVE_LINK           (0x00000200)
2786 #define MPI_SAS_EXPANDER0_DS_TABLE_LINK                 (0x00000400)
2787 #define MPI_SAS_EXPANDER0_DS_UNSUPPORTED_DEVICE         (0x00000800)
2788
2789 /* values for SAS Expander Page 0 Flags field */
2790 #define MPI_SAS_EXPANDER0_FLAGS_CONNECTOR_END_DEVICE    (0x04)
2791 #define MPI_SAS_EXPANDER0_FLAGS_ROUTE_TABLE_CONFIG      (0x02)
2792 #define MPI_SAS_EXPANDER0_FLAGS_CONFIG_IN_PROGRESS      (0x01)
2793
2794
2795 typedef struct _CONFIG_PAGE_SAS_EXPANDER_1
2796 {
2797     CONFIG_EXTENDED_PAGE_HEADER Header;                 /* 00h */
2798     U8                          PhysicalPort;           /* 08h */
2799     U8                          Reserved1;              /* 09h */
2800     U16                         Reserved2;              /* 0Ah */
2801     U8                          NumPhys;                /* 0Ch */
2802     U8                          Phy;                    /* 0Dh */
2803     U16                         NumTableEntriesProgrammed; /* 0Eh */
2804     U8                          ProgrammedLinkRate;     /* 10h */
2805     U8                          HwLinkRate;             /* 11h */
2806     U16                         AttachedDevHandle;      /* 12h */
2807     U32                         PhyInfo;                /* 14h */
2808     U32                         AttachedDeviceInfo;     /* 18h */
2809     U16                         OwnerDevHandle;         /* 1Ch */
2810     U8                          ChangeCount;            /* 1Eh */
2811     U8                          NegotiatedLinkRate;     /* 1Fh */
2812     U8                          PhyIdentifier;          /* 20h */
2813     U8                          AttachedPhyIdentifier;  /* 21h */
2814     U8                          Reserved3;              /* 22h */
2815     U8                          DiscoveryInfo;          /* 23h */
2816     U32                         Reserved4;              /* 24h */
2817 } CONFIG_PAGE_SAS_EXPANDER_1, MPI_POINTER PTR_CONFIG_PAGE_SAS_EXPANDER_1,
2818   SasExpanderPage1_t, MPI_POINTER pSasExpanderPage1_t;
2819
2820 #define MPI_SASEXPANDER1_PAGEVERSION        (0x01)
2821
2822 /* use MPI_SAS_PHY0_PRATE_ defines for ProgrammedLinkRate */
2823
2824 /* use MPI_SAS_PHY0_HWRATE_ defines for HwLinkRate */
2825
2826 /* use MPI_SAS_PHY0_PHYINFO_ defines for PhyInfo */
2827
2828 /* see mpi_sas.h for values for SAS Expander Page 1 AttachedDeviceInfo values */
2829
2830 /* values for SAS Expander Page 1 DiscoveryInfo field */
2831 #define MPI_SAS_EXPANDER1_DISCINFO_BAD_PHY_DISABLED     (0x04)
2832 #define MPI_SAS_EXPANDER1_DISCINFO_LINK_STATUS_CHANGE   (0x02)
2833 #define MPI_SAS_EXPANDER1_DISCINFO_NO_ROUTING_ENTRIES   (0x01)
2834
2835 /* values for SAS Expander Page 1 NegotiatedLinkRate field */
2836 #define MPI_SAS_EXPANDER1_NEG_RATE_UNKNOWN              (0x00)
2837 #define MPI_SAS_EXPANDER1_NEG_RATE_PHY_DISABLED         (0x01)
2838 #define MPI_SAS_EXPANDER1_NEG_RATE_FAILED_NEGOTIATION   (0x02)
2839 #define MPI_SAS_EXPANDER1_NEG_RATE_SATA_OOB_COMPLETE    (0x03)
2840 #define MPI_SAS_EXPANDER1_NEG_RATE_1_5                  (0x08)
2841 #define MPI_SAS_EXPANDER1_NEG_RATE_3_0                  (0x09)
2842
2843
2844 /****************************************************************************
2845 *   SAS Device Config Pages
2846 ****************************************************************************/
2847
2848 typedef struct _CONFIG_PAGE_SAS_DEVICE_0
2849 {
2850     CONFIG_EXTENDED_PAGE_HEADER         Header;                 /* 00h */
2851     U16                                 Slot;                   /* 08h */
2852     U16                                 EnclosureHandle;        /* 0Ah */
2853     U64                                 SASAddress;             /* 0Ch */
2854     U16                                 ParentDevHandle;        /* 14h */
2855     U8                                  PhyNum;                 /* 16h */
2856     U8                                  AccessStatus;           /* 17h */
2857     U16                                 DevHandle;              /* 18h */
2858     U8                                  TargetID;               /* 1Ah */
2859     U8                                  Bus;                    /* 1Bh */
2860     U32                                 DeviceInfo;             /* 1Ch */
2861     U16                                 Flags;                  /* 20h */
2862     U8                                  PhysicalPort;           /* 22h */
2863     U8                                  Reserved2;              /* 23h */
2864 } CONFIG_PAGE_SAS_DEVICE_0, MPI_POINTER PTR_CONFIG_PAGE_SAS_DEVICE_0,
2865   SasDevicePage0_t, MPI_POINTER pSasDevicePage0_t;
2866
2867 #define MPI_SASDEVICE0_PAGEVERSION          (0x05)
2868
2869 /* values for SAS Device Page 0 AccessStatus field */
2870 #define MPI_SAS_DEVICE0_ASTATUS_NO_ERRORS                   (0x00)
2871 #define MPI_SAS_DEVICE0_ASTATUS_SATA_INIT_FAILED            (0x01)
2872 #define MPI_SAS_DEVICE0_ASTATUS_SATA_CAPABILITY_FAILED      (0x02)
2873 #define MPI_SAS_DEVICE0_ASTATUS_SATA_AFFILIATION_CONFLICT   (0x03)
2874 /* specific values for SATA Init failures */
2875 #define MPI_SAS_DEVICE0_ASTATUS_SIF_UNKNOWN                 (0x10)
2876 #define MPI_SAS_DEVICE0_ASTATUS_SIF_AFFILIATION_CONFLICT    (0x11)
2877 #define MPI_SAS_DEVICE0_ASTATUS_SIF_DIAG                    (0x12)
2878 #define MPI_SAS_DEVICE0_ASTATUS_SIF_IDENTIFICATION          (0x13)
2879 #define MPI_SAS_DEVICE0_ASTATUS_SIF_CHECK_POWER             (0x14)
2880 #define MPI_SAS_DEVICE0_ASTATUS_SIF_PIO_SN                  (0x15)
2881 #define MPI_SAS_DEVICE0_ASTATUS_SIF_MDMA_SN                 (0x16)
2882 #define MPI_SAS_DEVICE0_ASTATUS_SIF_UDMA_SN                 (0x17)
2883 #define MPI_SAS_DEVICE0_ASTATUS_SIF_ZONING_VIOLATION        (0x18)
2884 #define MPI_SAS_DEVICE0_ASTATUS_SIF_NOT_ADDRESSABLE         (0x19)
2885 #define MPI_SAS_DEVICE0_ASTATUS_SIF_MAX                     (0x1F)
2886
2887 /* values for SAS Device Page 0 Flags field */
2888 #define MPI_SAS_DEVICE0_FLAGS_SATA_ASYNCHRONOUS_NOTIFY      (0x0400)
2889 #define MPI_SAS_DEVICE0_FLAGS_SATA_SW_PRESERVE              (0x0200)
2890 #define MPI_SAS_DEVICE0_FLAGS_UNSUPPORTED_DEVICE            (0x0100)
2891 #define MPI_SAS_DEVICE0_FLAGS_SATA_48BIT_LBA_SUPPORTED      (0x0080)
2892 #define MPI_SAS_DEVICE0_FLAGS_SATA_SMART_SUPPORTED          (0x0040)
2893 #define MPI_SAS_DEVICE0_FLAGS_SATA_NCQ_SUPPORTED            (0x0020)
2894 #define MPI_SAS_DEVICE0_FLAGS_SATA_FUA_SUPPORTED            (0x0010)
2895 #define MPI_SAS_DEVICE0_FLAGS_PORT_SELECTOR_ATTACH          (0x0008)
2896 #define MPI_SAS_DEVICE0_FLAGS_MAPPING_PERSISTENT            (0x0004)
2897 #define MPI_SAS_DEVICE0_FLAGS_DEVICE_MAPPED                 (0x0002)
2898 #define MPI_SAS_DEVICE0_FLAGS_DEVICE_PRESENT                (0x0001)
2899
2900 /* see mpi_sas.h for values for SAS Device Page 0 DeviceInfo values */
2901
2902
2903 typedef struct _CONFIG_PAGE_SAS_DEVICE_1
2904 {
2905     CONFIG_EXTENDED_PAGE_HEADER         Header;                 /* 00h */
2906     U32                                 Reserved1;              /* 08h */
2907     U64                                 SASAddress;             /* 0Ch */
2908     U32                                 Reserved2;              /* 14h */
2909     U16                                 DevHandle;              /* 18h */
2910     U8                                  TargetID;               /* 1Ah */
2911     U8                                  Bus;                    /* 1Bh */
2912     U8                                  InitialRegDeviceFIS[20];/* 1Ch */
2913 } CONFIG_PAGE_SAS_DEVICE_1, MPI_POINTER PTR_CONFIG_PAGE_SAS_DEVICE_1,
2914   SasDevicePage1_t, MPI_POINTER pSasDevicePage1_t;
2915
2916 #define MPI_SASDEVICE1_PAGEVERSION          (0x00)
2917
2918
2919 typedef struct _CONFIG_PAGE_SAS_DEVICE_2
2920 {
2921     CONFIG_EXTENDED_PAGE_HEADER         Header;                 /* 00h */
2922     U64                                 PhysicalIdentifier;     /* 08h */
2923     U32                                 EnclosureMapping;       /* 10h */
2924 } CONFIG_PAGE_SAS_DEVICE_2, MPI_POINTER PTR_CONFIG_PAGE_SAS_DEVICE_2,
2925   SasDevicePage2_t, MPI_POINTER pSasDevicePage2_t;
2926
2927 #define MPI_SASDEVICE2_PAGEVERSION          (0x01)
2928
2929 /* defines for SAS Device Page 2 EnclosureMapping field */
2930 #define MPI_SASDEVICE2_ENC_MAP_MASK_MISSING_COUNT       (0x0000000F)
2931 #define MPI_SASDEVICE2_ENC_MAP_SHIFT_MISSING_COUNT      (0)
2932 #define MPI_SASDEVICE2_ENC_MAP_MASK_NUM_SLOTS           (0x000007F0)
2933 #define MPI_SASDEVICE2_ENC_MAP_SHIFT_NUM_SLOTS          (4)
2934 #define MPI_SASDEVICE2_ENC_MAP_MASK_START_INDEX         (0x001FF800)
2935 #define MPI_SASDEVICE2_ENC_MAP_SHIFT_START_INDEX        (11)
2936
2937
2938 /****************************************************************************
2939 *   SAS PHY Config Pages
2940 ****************************************************************************/
2941
2942 typedef struct _CONFIG_PAGE_SAS_PHY_0
2943 {
2944     CONFIG_EXTENDED_PAGE_HEADER         Header;                 /* 00h */
2945     U16                                 OwnerDevHandle;         /* 08h */
2946     U16                                 Reserved1;              /* 0Ah */
2947     U64                                 SASAddress;             /* 0Ch */
2948     U16                                 AttachedDevHandle;      /* 14h */
2949     U8                                  AttachedPhyIdentifier;  /* 16h */
2950     U8                                  Reserved2;              /* 17h */
2951     U32                                 AttachedDeviceInfo;     /* 18h */
2952     U8                                  ProgrammedLinkRate;     /* 1Ch */
2953     U8                                  HwLinkRate;             /* 1Dh */
2954     U8                                  ChangeCount;            /* 1Eh */
2955     U8                                  Flags;                  /* 1Fh */
2956     U32                                 PhyInfo;                /* 20h */
2957 } CONFIG_PAGE_SAS_PHY_0, MPI_POINTER PTR_CONFIG_PAGE_SAS_PHY_0,
2958   SasPhyPage0_t, MPI_POINTER pSasPhyPage0_t;
2959
2960 #define MPI_SASPHY0_PAGEVERSION             (0x01)
2961
2962 /* values for SAS PHY Page 0 ProgrammedLinkRate field */
2963 #define MPI_SAS_PHY0_PRATE_MAX_RATE_MASK                        (0xF0)
2964 #define MPI_SAS_PHY0_PRATE_MAX_RATE_NOT_PROGRAMMABLE            (0x00)
2965 #define MPI_SAS_PHY0_PRATE_MAX_RATE_1_5                         (0x80)
2966 #define MPI_SAS_PHY0_PRATE_MAX_RATE_3_0                         (0x90)
2967 #define MPI_SAS_PHY0_PRATE_MIN_RATE_MASK                        (0x0F)
2968 #define MPI_SAS_PHY0_PRATE_MIN_RATE_NOT_PROGRAMMABLE            (0x00)
2969 #define MPI_SAS_PHY0_PRATE_MIN_RATE_1_5                         (0x08)
2970 #define MPI_SAS_PHY0_PRATE_MIN_RATE_3_0                         (0x09)
2971
2972 /* values for SAS PHY Page 0 HwLinkRate field */
2973 #define MPI_SAS_PHY0_HWRATE_MAX_RATE_MASK                       (0xF0)
2974 #define MPI_SAS_PHY0_HWRATE_MAX_RATE_1_5                        (0x80)
2975 #define MPI_SAS_PHY0_HWRATE_MAX_RATE_3_0                        (0x90)
2976 #define MPI_SAS_PHY0_HWRATE_MIN_RATE_MASK                       (0x0F)
2977 #define MPI_SAS_PHY0_HWRATE_MIN_RATE_1_5                        (0x08)
2978 #define MPI_SAS_PHY0_HWRATE_MIN_RATE_3_0                        (0x09)
2979
2980 /* values for SAS PHY Page 0 Flags field */
2981 #define MPI_SAS_PHY0_FLAGS_SGPIO_DIRECT_ATTACH_ENC              (0x01)
2982
2983 /* values for SAS PHY Page 0 PhyInfo field */
2984 #define MPI_SAS_PHY0_PHYINFO_SATA_PORT_ACTIVE                   (0x00004000)
2985 #define MPI_SAS_PHY0_PHYINFO_SATA_PORT_SELECTOR                 (0x00002000)
2986 #define MPI_SAS_PHY0_PHYINFO_VIRTUAL_PHY                        (0x00001000)
2987
2988 #define MPI_SAS_PHY0_PHYINFO_MASK_PARTIAL_PATHWAY_TIME          (0x00000F00)
2989 #define MPI_SAS_PHY0_PHYINFO_SHIFT_PARTIAL_PATHWAY_TIME         (8)
2990
2991 #define MPI_SAS_PHY0_PHYINFO_MASK_ROUTING_ATTRIBUTE             (0x000000F0)
2992 #define MPI_SAS_PHY0_PHYINFO_DIRECT_ROUTING                     (0x00000000)
2993 #define MPI_SAS_PHY0_PHYINFO_SUBTRACTIVE_ROUTING                (0x00000010)
2994 #define MPI_SAS_PHY0_PHYINFO_TABLE_ROUTING                      (0x00000020)
2995
2996 #define MPI_SAS_PHY0_PHYINFO_MASK_LINK_RATE                     (0x0000000F)
2997 #define MPI_SAS_PHY0_PHYINFO_UNKNOWN_LINK_RATE                  (0x00000000)
2998 #define MPI_SAS_PHY0_PHYINFO_PHY_DISABLED                       (0x00000001)
2999 #define MPI_SAS_PHY0_PHYINFO_NEGOTIATION_FAILED                 (0x00000002)
3000 #define MPI_SAS_PHY0_PHYINFO_SATA_OOB_COMPLETE                  (0x00000003)
3001 #define MPI_SAS_PHY0_PHYINFO_RATE_1_5                           (0x00000008)
3002 #define MPI_SAS_PHY0_PHYINFO_RATE_3_0                           (0x00000009)
3003
3004
3005 typedef struct _CONFIG_PAGE_SAS_PHY_1
3006 {
3007     CONFIG_EXTENDED_PAGE_HEADER Header;                     /* 00h */
3008     U32                         Reserved1;                  /* 08h */
3009     U32                         InvalidDwordCount;          /* 0Ch */
3010     U32                         RunningDisparityErrorCount; /* 10h */
3011     U32                         LossDwordSynchCount;        /* 14h */
3012     U32                         PhyResetProblemCount;       /* 18h */
3013 } CONFIG_PAGE_SAS_PHY_1, MPI_POINTER PTR_CONFIG_PAGE_SAS_PHY_1,
3014   SasPhyPage1_t, MPI_POINTER pSasPhyPage1_t;
3015
3016 #define MPI_SASPHY1_PAGEVERSION             (0x00)
3017
3018
3019 /****************************************************************************
3020 *   SAS Enclosure Config Pages
3021 ****************************************************************************/
3022
3023 typedef struct _CONFIG_PAGE_SAS_ENCLOSURE_0
3024 {
3025     CONFIG_EXTENDED_PAGE_HEADER         Header;                 /* 00h */
3026     U32                                 Reserved1;              /* 08h */
3027     U64                                 EnclosureLogicalID;     /* 0Ch */
3028     U16                                 Flags;                  /* 14h */
3029     U16                                 EnclosureHandle;        /* 16h */
3030     U16                                 NumSlots;               /* 18h */
3031     U16                                 StartSlot;              /* 1Ah */
3032     U8                                  StartTargetID;          /* 1Ch */
3033     U8                                  StartBus;               /* 1Dh */
3034     U8                                  SEPTargetID;            /* 1Eh */
3035     U8                                  SEPBus;                 /* 1Fh */
3036     U32                                 Reserved2;              /* 20h */
3037     U32                                 Reserved3;              /* 24h */
3038 } CONFIG_PAGE_SAS_ENCLOSURE_0, MPI_POINTER PTR_CONFIG_PAGE_SAS_ENCLOSURE_0,
3039   SasEnclosurePage0_t, MPI_POINTER pSasEnclosurePage0_t;
3040
3041 #define MPI_SASENCLOSURE0_PAGEVERSION       (0x01)
3042
3043 /* values for SAS Enclosure Page 0 Flags field */
3044 #define MPI_SAS_ENCLS0_FLAGS_SEP_BUS_ID_VALID       (0x0020)
3045 #define MPI_SAS_ENCLS0_FLAGS_START_BUS_ID_VALID     (0x0010)
3046
3047 #define MPI_SAS_ENCLS0_FLAGS_MNG_MASK               (0x000F)
3048 #define MPI_SAS_ENCLS0_FLAGS_MNG_UNKNOWN            (0x0000)
3049 #define MPI_SAS_ENCLS0_FLAGS_MNG_IOC_SES            (0x0001)
3050 #define MPI_SAS_ENCLS0_FLAGS_MNG_IOC_SGPIO          (0x0002)
3051 #define MPI_SAS_ENCLS0_FLAGS_MNG_EXP_SGPIO          (0x0003)
3052 #define MPI_SAS_ENCLS0_FLAGS_MNG_SES_ENCLOSURE      (0x0004)
3053 #define MPI_SAS_ENCLS0_FLAGS_MNG_IOC_GPIO           (0x0005)
3054
3055
3056 /****************************************************************************
3057 *   Log Config Pages
3058 ****************************************************************************/
3059 /*
3060  * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
3061  * one and check NumLogEntries at runtime.
3062  */
3063 #ifndef MPI_LOG_0_NUM_LOG_ENTRIES
3064 #define MPI_LOG_0_NUM_LOG_ENTRIES        (1)
3065 #endif
3066
3067 #define MPI_LOG_0_LOG_DATA_LENGTH        (0x1C)
3068
3069 typedef struct _MPI_LOG_0_ENTRY
3070 {
3071     U32         TimeStamp;                          /* 00h */
3072     U32         Reserved1;                          /* 04h */
3073     U16         LogSequence;                        /* 08h */
3074     U16         LogEntryQualifier;                  /* 0Ah */
3075     U8          LogData[MPI_LOG_0_LOG_DATA_LENGTH]; /* 0Ch */
3076 } MPI_LOG_0_ENTRY, MPI_POINTER PTR_MPI_LOG_0_ENTRY,
3077   MpiLog0Entry_t, MPI_POINTER pMpiLog0Entry_t;
3078
3079 /* values for Log Page 0 LogEntry LogEntryQualifier field */
3080 #define MPI_LOG_0_ENTRY_QUAL_ENTRY_UNUSED           (0x0000)
3081 #define MPI_LOG_0_ENTRY_QUAL_POWER_ON_RESET         (0x0001)
3082
3083 typedef struct _CONFIG_PAGE_LOG_0
3084 {
3085     CONFIG_EXTENDED_PAGE_HEADER Header;                     /* 00h */
3086     U32                         Reserved1;                  /* 08h */
3087     U32                         Reserved2;                  /* 0Ch */
3088     U16                         NumLogEntries;              /* 10h */
3089     U16                         Reserved3;                  /* 12h */
3090     MPI_LOG_0_ENTRY             LogEntry[MPI_LOG_0_NUM_LOG_ENTRIES]; /* 14h */
3091 } CONFIG_PAGE_LOG_0, MPI_POINTER PTR_CONFIG_PAGE_LOG_0,
3092   LogPage0_t, MPI_POINTER pLogPage0_t;
3093
3094 #define MPI_LOG_0_PAGEVERSION               (0x01)
3095
3096
3097 #endif
3098