Merge from vendor branch LIBARCHIVE:
[dragonfly.git] / sys / dev / netif / an / if_anreg.h
1 /*
2  * Copyright (c) 1997, 1998, 1999
3  *      Bill Paul <wpaul@ctr.columbia.edu>.  All rights reserved.
4  *
5  * Redistribution and use in source and binary forms, with or without
6  * modification, are permitted provided that the following conditions
7  * are met:
8  * 1. Redistributions of source code must retain the above copyright
9  *    notice, this list of conditions and the following disclaimer.
10  * 2. Redistributions in binary form must reproduce the above copyright
11  *    notice, this list of conditions and the following disclaimer in the
12  *    documentation and/or other materials provided with the distribution.
13  * 3. All advertising materials mentioning features or use of this software
14  *    must display the following acknowledgement:
15  *      This product includes software developed by Bill Paul.
16  * 4. Neither the name of the author nor the names of any co-contributors
17  *    may be used to endorse or promote products derived from this software
18  *    without specific prior written permission.
19  *
20  * THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND
21  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
22  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
23  * ARE DISCLAIMED.  IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD
24  * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
25  * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
26  * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
27  * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
28  * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
29  * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
30  * THE POSSIBILITY OF SUCH DAMAGE.
31  *
32  * $FreeBSD: src/sys/dev/an/if_anreg.h,v 1.1.2.8 2003/02/11 03:32:48 ambrisko Exp $
33  * $DragonFly: src/sys/dev/netif/an/if_anreg.h,v 1.8 2005/07/28 16:52:44 joerg Exp $
34  */
35
36 #define AN_TIMEOUT      65536
37
38 /* Default network name: <empty string> */
39 #define AN_DEFAULT_NETNAME      ""
40
41 /* The nodename must be less than 16 bytes */
42 #define AN_DEFAULT_NODENAME     "FreeBSD"
43
44 #define AN_DEFAULT_IBSS         "FreeBSD IBSS"
45
46 /*
47  * register space access macros
48  */
49 #define CSR_WRITE_2(sc, reg, val)       \
50         bus_space_write_2(sc->an_btag, sc->an_bhandle, reg, val)
51
52 #define CSR_READ_2(sc, reg)             \
53         bus_space_read_2(sc->an_btag, sc->an_bhandle, reg)
54
55 #define CSR_WRITE_1(sc, reg, val)       \
56         bus_space_write_1(sc->an_btag, sc->an_bhandle, reg, val)
57
58 #define CSR_READ_1(sc, reg)             \
59         bus_space_read_1(sc->an_btag, sc->an_bhandle, reg)
60
61 /*
62  * memory space access macros
63  */
64 #define CSR_MEM_WRITE_2(sc, reg, val)   \
65         bus_space_write_2(sc->an_mem_btag, sc->an_mem_bhandle, reg, val)
66
67 #define CSR_MEM_READ_2(sc, reg)         \
68         bus_space_read_2(sc->an_mem_btag, sc->an_mem_bhandle, reg)
69
70 #define CSR_MEM_WRITE_1(sc, reg, val)   \
71         bus_space_write_1(sc->an_mem_btag, sc->an_mem_bhandle, reg, val)
72
73 #define CSR_MEM_READ_1(sc, reg)         \
74         bus_space_read_1(sc->an_mem_btag, sc->an_mem_bhandle, reg)
75
76 /*
77  * aux. memory space access macros
78  */
79 #define CSR_MEM_AUX_WRITE_4(sc, reg, val)       \
80         bus_space_write_4(sc->an_mem_aux_btag, sc->an_mem_aux_bhandle, reg, val)
81
82 #define CSR_MEM_AUX_READ_4(sc, reg)             \
83         bus_space_read_4(sc->an_mem_aux_btag, sc->an_mem_aux_bhandle, reg)
84
85 #define CSR_MEM_AUX_WRITE_1(sc, reg, val)       \
86         bus_space_write_1(sc->an_mem_aux_btag, sc->an_mem_aux_bhandle, reg, val)
87
88 #define CSR_MEM_AUX_READ_1(sc, reg)             \
89         bus_space_read_1(sc->an_mem_aux_btag, sc->an_mem_aux_bhandle, reg)
90
91 /*
92  * Size of Aironet I/O space.
93  */
94 #define AN_IOSIZ                0x40
95
96 /*
97  * Size of aux. memory space ... probably not needed DJA 
98  */
99 #define AN_AUXMEMSIZE           (256 * 1024)
100
101 /*
102  * Hermes register definitions and what little I know about them.
103  */
104
105 /* Hermes command/status registers. */
106 #define AN_COMMAND(x)           (x ? 0x00 : 0x00)
107 #define AN_PARAM0(x)            (x ? 0x04 : 0x02)
108 #define AN_PARAM1(x)            (x ? 0x08 : 0x04)
109 #define AN_PARAM2(x)            (x ? 0x0c : 0x06)
110 #define AN_STATUS(x)            (x ? 0x10 : 0x08)
111 #define AN_RESP0(x)             (x ? 0x14 : 0x0A)
112 #define AN_RESP1(x)             (x ? 0x18 : 0x0C)
113 #define AN_RESP2(x)             (x ? 0x1c : 0x0E)
114 #define AN_LINKSTAT(x)          (x ? 0x20 : 0x10)
115
116 /* Command register */
117 #define AN_CMD_BUSY             0x8000 /* busy bit */
118 #define AN_CMD_NO_ACK           0x0080 /* don't acknowledge command */
119 #define AN_CMD_CODE_MASK        0x003F
120 #define AN_CMD_QUAL_MASK        0x7F00
121
122 /* Command codes */
123 #define AN_CMD_NOOP             0x0000 /* no-op */
124 #define AN_CMD_ENABLE           0x0001 /* enable */
125 #define AN_CMD_DISABLE          0x0002 /* disable */
126 #define AN_CMD_FORCE_SYNCLOSS   0x0003 /* force loss of sync */
127 #define AN_CMD_FW_RESTART       0x0004 /* firmware resrart */
128 #define AN_CMD_HOST_SLEEP       0x0005
129 #define AN_CMD_MAGIC_PKT        0x0006
130 #define AN_CMD_READCFG          0x0008
131 #define AN_CMD_SET_MODE         0x0009
132 #define AN_CMD_ALLOC_MEM        0x000A /* allocate NIC memory */
133 #define AN_CMD_TX               0x000B /* transmit */
134 #define AN_CMD_DEALLOC_MEM      0x000C
135 #define AN_CMD_NOOP2            0x0010
136 #define AN_CMD_ALLOC_DESC       0x0020
137 #define AN_CMD_ACCESS           0x0021
138 #define AN_CMD_ALLOC_BUF        0x0028
139 #define AN_CMD_PSP_NODES        0x0030
140 #define AN_CMD_SET_PHYREG       0x003E
141 #define AN_CMD_TX_TEST          0x003F
142 #define AN_CMD_SLEEP            0x0085
143 #define AN_CMD_SAVECFG          0x0108
144
145 /*
146  * MPI 350 DMA descriptor information
147  */
148 #define AN_DESCRIPTOR_TX        0x01
149 #define AN_DESCRIPTOR_RX        0x02
150 #define AN_DESCRIPTOR_TXCMP     0x04
151 #define AN_DESCRIPTOR_HOSTWRITE 0x08
152 #define AN_DESCRIPTOR_HOSTREAD  0x10
153 #define AN_DESCRIPTOR_HOSTRW    0x20
154
155 #define AN_MAX_RX_DESC 1
156 #define AN_MAX_TX_DESC 1
157 #define AN_HOSTBUFSIZ 1840
158
159 struct an_card_rid_desc
160 {
161         unsigned        an_rid:16;
162         unsigned        an_len:15;
163         unsigned        an_valid:1;
164         u_int64_t       an_phys;
165 };
166
167 struct an_card_rx_desc
168 {
169         unsigned        an_ctrl:15;
170         unsigned        an_done:1;
171         unsigned        an_len:15;
172         unsigned        an_valid:1;
173         u_int64_t       an_phys;
174 };
175
176 struct an_card_tx_desc
177 {
178         unsigned        an_offset:15;
179         unsigned        an_eoc:1;
180         unsigned        an_len:15;
181         unsigned        an_valid:1;
182         u_int64_t       an_phys;
183 };
184
185 #define AN_RID_BUFFER_SIZE      AN_MAX_DATALEN
186 #define AN_RX_BUFFER_SIZE       AN_HOSTBUFSIZ
187 #define AN_TX_BUFFER_SIZE       AN_HOSTBUFSIZ
188 /*#define AN_HOST_DESC_OFFSET   0xC sort of works */
189 #define AN_HOST_DESC_OFFSET     0x800
190 #define AN_RX_DESC_OFFSET  (AN_HOST_DESC_OFFSET + \
191     sizeof(struct an_card_rid_desc))
192 #define AN_TX_DESC_OFFSET (AN_RX_DESC_OFFSET + \
193     (AN_MAX_RX_DESC * sizeof(struct an_card_rx_desc)))
194
195 struct an_command {
196         u_int16_t       an_cmd;
197         u_int16_t       an_parm0;
198         u_int16_t       an_parm1;
199         u_int16_t       an_parm2;
200 };
201
202 struct an_reply {
203         u_int16_t       an_status;
204         u_int16_t       an_resp0;
205         u_int16_t       an_resp1;
206         u_int16_t       an_resp2;
207 };
208
209 /*
210  * Reclaim qualifier bit, applicable to the
211  * TX command.
212  */
213 #define AN_RECLAIM              0x0100 /* reclaim NIC memory */
214
215 /*
216  * ACCESS command qualifier bits.
217  */
218 #define AN_ACCESS_READ          0x0000
219 #define AN_ACCESS_WRITE         0x0100
220
221 /*
222  * PROGRAM command qualifier bits.
223  */
224 #define AN_PROGRAM_DISABLE      0x0000
225 #define AN_PROGRAM_ENABLE_RAM   0x0100
226 #define AN_PROGRAM_ENABLE_NVRAM 0x0200
227 #define AN_PROGRAM_NVRAM        0x0300
228
229 /* Status register values */
230 #define AN_STAT_CMD_CODE        0x003F
231 #define AN_STAT_CMD_RESULT      0x7F00
232
233 /* Linkstat register */
234 #define AN_LINKSTAT_ASSOCIATED          0x0400
235 #define AN_LINKSTAT_AUTHFAIL            0x0300
236 #define AN_LINKSTAT_ASSOC_FAIL          0x8400
237 #define AN_LINKSTAT_DISASSOC            0x8200
238 #define AN_LINKSTAT_DEAUTH              0x8100
239 #define AN_LINKSTAT_SYNCLOST_TSF        0x8004
240 #define AN_LINKSTAT_SYNCLOST_HOSTREQ    0x8003
241 #define AN_LINKSTAT_SYNCLOST_AVGRETRY   0x8002
242 #define AN_LINKSTAT_SYNCLOST_MAXRETRY   0x8001
243 #define AN_LINKSTAT_SYNCLOST_MISSBEACON 0x8000
244
245 /* memory handle management registers */
246 #define AN_RX_FID               0x20
247 #define AN_ALLOC_FID            0x22
248 #define AN_TX_CMP_FID(x)        (x ? 0x1a : 0x24)
249
250 /*
251  * Buffer Access Path (BAP) registers.
252  * These are I/O channels. I believe you can use each one for
253  * any desired purpose independently of the other. In general
254  * though, we use BAP1 for reading and writing LTV records and
255  * reading received data frames, and BAP0 for writing transmit
256  * frames. This is a convention though, not a rule.
257  */
258 #define AN_SEL0                 0x18
259 #define AN_SEL1                 0x1A
260 #define AN_OFF0                 0x1C
261 #define AN_OFF1                 0x1E
262 #define AN_DATA0                0x36
263 #define AN_DATA1                0x38
264 #define AN_BAP0                 AN_DATA0
265 #define AN_BAP1                 AN_DATA1
266
267 #define AN_OFF_BUSY             0x8000
268 #define AN_OFF_ERR              0x4000
269 #define AN_OFF_DONE             0x2000
270 #define AN_OFF_DATAOFF          0x0FFF
271
272 /* Event registers */
273 #define AN_EVENT_STAT(x)        (x ? 0x60 : 0x30)       /* Event status */
274 #define AN_INT_EN(x)            (x ? 0x64 : 0x32)       /* Interrupt enable/
275                                                            disable */
276 #define AN_EVENT_ACK(x)         (x ? 0x68 : 0x34)       /* Ack event */
277
278 /* Events */
279 #define AN_EV_CLR_STUCK_BUSY    0x4000  /* clear stuck busy bit */
280 #define AN_EV_WAKEREQUEST       0x2000  /* awaken from PSP mode */
281 #define AN_EV_MIC               0x1000  /* Message Integrity Check*/
282 #define AN_EV_AWAKE             0x0100  /* station woke up from PSP mode*/
283 #define AN_EV_LINKSTAT          0x0080  /* link status available */
284 #define AN_EV_CMD               0x0010  /* command completed */
285 #define AN_EV_ALLOC             0x0008  /* async alloc/reclaim completed */
286 #define AN_EV_TX_CPY            0x0400
287 #define AN_EV_TX_EXC            0x0004  /* async xmit completed with failure */
288 #define AN_EV_TX                0x0002  /* async xmit completed succesfully */
289 #define AN_EV_RX                0x0001  /* async rx completed */
290
291 #define AN_INTRS(x)     \
292         ( x ? (AN_EV_RX|AN_EV_TX|AN_EV_TX_EXC|AN_EV_TX_CPY|AN_EV_ALLOC \
293                |AN_EV_LINKSTAT|AN_EV_MIC) \
294           : \
295               (AN_EV_RX|AN_EV_TX|AN_EV_TX_EXC|AN_EV_ALLOC \
296                |AN_EV_LINKSTAT|AN_EV_MIC) \
297               )
298
299 /* Host software registers */
300 #define AN_SW0(x)               (x ? 0x50 : 0x28)
301 #define AN_SW1(x)               (x ? 0x54 : 0x2A)
302 #define AN_SW2(x)               (x ? 0x58 : 0x2C)
303 #define AN_SW3(x)               (x ? 0x5c : 0x2E)
304
305 #define AN_CNTL                 0x14
306
307 #define AN_CNTL_AUX_ENA         0xC000
308 #define AN_CNTL_AUX_ENA_STAT    0xC000
309 #define AN_CNTL_AUX_DIS_STAT    0x0000
310 #define AN_CNTL_AUX_ENA_CNTL    0x8000
311 #define AN_CNTL_AUX_DIS_CNTL    0x4000
312
313 #define AN_AUX_PAGE             0x3A
314 #define AN_AUX_OFFSET           0x3C
315 #define AN_AUX_DATA             0x3E
316
317 /*
318  * Length, Type, Value (LTV) record definitions and RID values.
319  */
320 struct an_ltv_gen {
321         u_int16_t               an_len;
322         u_int16_t               an_type;
323         u_int16_t               an_val;
324 };
325
326 #define AN_DEF_SSID_LEN         7
327 #define AN_DEF_SSID             "tsunami"
328
329 #define AN_RXGAP_MAX    8
330
331 /*
332  * Transmit frame structure.
333  */
334 struct an_txframe {
335         u_int32_t               an_tx_sw;               /* 0x00 */
336         u_int16_t               an_tx_status;           /* 0x04 */
337         u_int16_t               an_tx_payload_len;      /* 0x06 */
338         u_int16_t               an_tx_ctl;              /* 0x08 */
339         u_int16_t               an_tx_assoc_id;         /* 0x0A */
340         u_int16_t               an_tx_retry;            /* 0x0C */
341         u_int8_t                an_tx_assoc_cnt;        /* 0x0E */
342         u_int8_t                an_tx_rate;             /* 0x0F */
343         u_int8_t                an_tx_max_long_retries; /* 0x10 */
344         u_int8_t                an_tx_max_short_retries; /*0x11 */
345         u_int8_t                an_rsvd0[2];            /* 0x12 */
346         u_int16_t               an_frame_ctl;           /* 0x14 */
347         u_int16_t               an_duration;            /* 0x16 */
348         u_int8_t                an_addr1[6];            /* 0x18 */
349         u_int8_t                an_addr2[6];            /* 0x1E */
350         u_int8_t                an_addr3[6];            /* 0x24 */
351         u_int16_t               an_seq_ctl;             /* 0x2A */
352         u_int8_t                an_addr4[6];            /* 0x2C */
353         u_int8_t                an_gaplen;              /* 0x32 */
354 } __attribute__ ((packed));
355
356 struct an_rxframe_802_3 {
357         u_int16_t               an_rx_802_3_status;     /* 0x34 */
358         u_int16_t               an_rx_802_3_payload_len;/* 0x36 */
359         u_int8_t                an_rx_dst_addr[6];      /* 0x38 */
360         u_int8_t                an_rx_src_addr[6];      /* 0x3E */
361 };
362 #define AN_RXGAP_MAX    8
363
364
365 struct an_txframe_802_3 {
366 /*
367  * Transmit 802.3 header structure.
368  */
369         u_int16_t               an_tx_802_3_status;     /* 0x34 */
370         u_int16_t               an_tx_802_3_payload_len;/* 0x36 */
371         u_int8_t                an_tx_dst_addr[6];      /* 0x38 */
372         u_int8_t                an_tx_src_addr[6];      /* 0x3E */
373 };
374
375 #define AN_TXSTAT_EXCESS_RETRY  0x0002
376 #define AN_TXSTAT_LIFE_EXCEEDED 0x0004
377 #define AN_TXSTAT_AID_FAIL      0x0008
378 #define AN_TXSTAT_MAC_DISABLED  0x0010
379 #define AN_TXSTAT_ASSOC_LOST    0x0020
380
381 #define AN_TXCTL_RSVD           0x0001
382 #define AN_TXCTL_TXOK_INTR      0x0002
383 #define AN_TXCTL_TXERR_INTR     0x0004
384 #define AN_TXCTL_HEADER_TYPE    0x0008
385 #define AN_TXCTL_PAYLOAD_TYPE   0x0010
386 #define AN_TXCTL_NORELEASE      0x0020
387 #define AN_TXCTL_NORETRIES      0x0040
388 #define AN_TXCTL_CLEAR_AID      0x0080
389 #define AN_TXCTL_STRICT_ORDER   0x0100
390 #define AN_TXCTL_USE_RTS        0x0200
391
392 #define AN_HEADERTYPE_8023      0x0000
393 #define AN_HEADERTYPE_80211     0x0008
394
395 #define AN_PAYLOADTYPE_ETHER    0x0000
396 #define AN_PAYLOADTYPE_LLC      0x0010
397
398 #define AN_TXCTL_80211  \
399         (AN_TXCTL_TXOK_INTR|AN_TXCTL_TXERR_INTR|AN_HEADERTYPE_80211|    \
400         AN_PAYLOADTYPE_LLC|AN_TXCTL_NORELEASE)
401
402 #define AN_TXCTL_8023   \
403         (AN_TXCTL_TXOK_INTR|AN_TXCTL_TXERR_INTR|AN_HEADERTYPE_8023|     \
404         AN_PAYLOADTYPE_ETHER|AN_TXCTL_NORELEASE)
405
406 #define AN_TXGAP_80211          0
407 #define AN_TXGAP_8023           0
408
409 struct an_802_3_hdr {
410         u_int16_t               an_8023_status;
411         u_int16_t               an_8023_payload_len;
412         u_int8_t                an_8023_dst_addr[6];
413         u_int8_t                an_8023_src_addr[6];
414         u_int16_t               an_8023_dat[3]; /* SNAP header */
415         u_int16_t               an_8023_type;
416 };
417
418 struct an_snap_hdr {
419         u_int16_t               an_snap_dat[3]; /* SNAP header */
420         u_int16_t               an_snap_type;
421 };
422
423 struct an_dma_alloc {
424         u_int32_t               an_dma_paddr;
425         caddr_t                 an_dma_vaddr;
426         bus_dmamap_t            an_dma_map;
427         bus_dma_segment_t       an_dma_seg;
428         bus_size_t              an_dma_size;
429         int                     an_dma_nseg;
430 };
431
432 #define AN_TX_RING_CNT          4
433 #define AN_INC(x, y)            (x) = (x + 1) % y
434
435 struct an_tx_ring_data {
436         u_int16_t               an_tx_fids[AN_TX_RING_CNT];
437         u_int16_t               an_tx_ring[AN_TX_RING_CNT];
438         int                     an_tx_prod;
439         int                     an_tx_cons;
440         int                     an_tx_empty;
441 };
442
443 struct an_softc {
444         struct arpcom           arpcom;
445
446         int     port_rid;       /* resource id for port range */
447         struct resource* port_res; /* resource for port range */
448         int     mem_rid;        /* resource id for memory range */
449         int     mem_used;       /* nonzero if memory used */
450         struct resource* mem_res; /* resource for memory range */
451         int     mem_aux_rid;    /* resource id for memory range */
452         int     mem_aux_used;   /* nonzero if memory used */
453         struct resource* mem_aux_res; /* resource for memory range */
454         int     irq_rid;        /* resource id for irq */
455         void*   irq_handle;     /* handle for irq handler */
456         struct resource* irq_res; /* resource for irq */
457
458         bus_space_handle_t      an_bhandle_p;
459         bus_space_handle_t      an_bhandle;
460         bus_space_tag_t         an_btag;
461         bus_space_handle_t      an_mem_bhandle;
462         bus_space_tag_t         an_mem_btag;
463         bus_space_handle_t      an_mem_aux_bhandle;
464         bus_space_tag_t         an_mem_aux_btag;
465         bus_dma_tag_t           an_dtag;
466         struct an_ltv_genconfig an_config;
467         struct an_ltv_caps      an_caps;
468         struct an_ltv_ssidlist_new      an_ssidlist;
469         struct an_ltv_aplist    an_aplist;
470         struct an_ltv_key       an_temp_keys[4];
471         int                     an_tx_rate;
472         int                     an_rxmode;
473         int                     an_if_flags;
474         u_int8_t                an_txbuf[1536];
475         struct an_tx_ring_data  an_rdata;
476         struct an_ltv_stats     an_stats;
477         struct an_ltv_status    an_status;
478         u_int8_t                an_associated;
479 #ifdef ANCACHE
480         int                     an_sigitems;
481         struct an_sigcache      an_sigcache[MAXANCACHE];
482         int                     an_nextitem;
483         int                     an_have_rssimap;
484         struct an_ltv_rssi_map  an_rssimap;
485 #endif
486         struct callout          an_stat_timer;
487         struct ifmedia          an_ifmedia;
488         int                     an_monitor;
489         int                     an_was_monitor;
490         u_char                  buf_802_11[MCLBYTES];
491         struct an_req           areq;
492         unsigned short*         an_flash_buffer;
493         int                     mpi350;
494         struct an_dma_alloc     an_rid_buffer;
495         struct an_dma_alloc     an_rx_buffer[AN_MAX_RX_DESC];
496         struct an_dma_alloc     an_tx_buffer[AN_MAX_TX_DESC];
497 };
498
499 void    an_release_resources    (device_t);
500 int     an_alloc_port           (device_t, int, int);
501 int     an_alloc_memory         (device_t, int, int);
502 int     an_alloc_aux_memory     (device_t, int, int);
503 int     an_alloc_irq            (device_t, int, int);
504 int     an_probe                (device_t);
505 void    an_shutdown             (device_t);
506 void    an_resume               (device_t);
507 int     an_attach               (struct an_softc *, device_t, int);
508 int     an_detach               (device_t);
509 void    an_stop                 (struct an_softc *);
510
511 driver_intr_t   an_intr;
512
513 #define AN_802_3_OFFSET         0x2E
514 #define AN_802_11_OFFSET        0x44
515 #define AN_802_11_OFFSET_RAW    0x3C
516
517 #define AN_STAT_BADCRC          0x0001
518 #define AN_STAT_UNDECRYPTABLE   0x0002
519 #define AN_STAT_ERRSTAT         0x0003
520 #define AN_STAT_MAC_PORT        0x0700
521 #define AN_STAT_1042            0x2000  /* RFC1042 encoded */
522 #define AN_STAT_TUNNEL          0x4000  /* Bridge-tunnel encoded */
523 #define AN_STAT_WMP_MSG         0x6000  /* WaveLAN-II management protocol */
524 #define AN_RXSTAT_MSG_TYPE      0xE000
525
526 #define AN_ENC_TX_802_3         0x00
527 #define AN_ENC_TX_802_11        0x11
528 #define AN_ENC_TX_E_II          0x0E
529
530 #define AN_ENC_TX_1042          0x00
531 #define AN_ENC_TX_TUNNEL        0xF8
532
533 #define AN_TXCNTL_MACPORT       0x00FF
534 #define AN_TXCNTL_STRUCTTYPE    0xFF00
535
536 /*
537  * SNAP (sub-network access protocol) constants for transmission
538  * of IP datagrams over IEEE 802 networks, taken from RFC1042.
539  * We need these for the LLC/SNAP header fields in the TX/RX frame
540  * structure.
541  */
542 #define AN_SNAP_K1              0xaa    /* assigned global SAP for SNAP */
543 #define AN_SNAP_K2              0x00
544 #define AN_SNAP_CONTROL         0x03    /* unnumbered information format */
545 #define AN_SNAP_WORD0           (AN_SNAP_K1 | (AN_SNAP_K1 << 8))
546 #define AN_SNAP_WORD1           (AN_SNAP_K2 | (AN_SNAP_CONTROL << 8))
547 #define AN_SNAPHDR_LEN          0x6