2 * Copyright (c) 1997, 1998, 1999, 2000
3 * Bill Paul <wpaul@ee.columbia.edu>. All rights reserved.
5 * Redistribution and use in source and binary forms, with or without
6 * modification, are permitted provided that the following conditions
8 * 1. Redistributions of source code must retain the above copyright
9 * notice, this list of conditions and the following disclaimer.
10 * 2. Redistributions in binary form must reproduce the above copyright
11 * notice, this list of conditions and the following disclaimer in the
12 * documentation and/or other materials provided with the distribution.
13 * 3. All advertising materials mentioning features or use of this software
14 * must display the following acknowledgement:
15 * This product includes software developed by Bill Paul.
16 * 4. Neither the name of the author nor the names of any co-contributors
17 * may be used to endorse or promote products derived from this software
18 * without specific prior written permission.
20 * THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND
21 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
22 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
23 * ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD
24 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
25 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
26 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
27 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
28 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
29 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
30 * THE POSSIBILITY OF SUCH DAMAGE.
32 * $FreeBSD: src/sys/dev/usb/if_cue.c,v 1.45 2003/12/08 07:54:14 obrien Exp $
33 * $DragonFly: src/sys/dev/netif/cue/if_cue.c,v 1.21 2005/05/25 11:59:14 joerg Exp $
37 * CATC USB-EL1210A USB to ethernet driver. Used in the CATC Netmate
38 * adapters and others.
40 * Written by Bill Paul <wpaul@ee.columbia.edu>
41 * Electrical Engineering Department
42 * Columbia University, New York City
46 * The CATC USB-EL1210A provides USB ethernet support at 10Mbps. The
47 * RX filter uses a 512-bit multicast hash table, single perfect entry
48 * for the station address, and promiscuous mode. Unlike the ADMtek
49 * and KLSI chips, the CATC ASIC supports read and write combining
50 * mode where multiple packets can be transfered using a single bulk
51 * transaction, which helps performance a great deal.
54 #include <sys/param.h>
55 #include <sys/systm.h>
56 #include <sys/sockio.h>
58 #include <sys/malloc.h>
59 #include <sys/kernel.h>
60 #include <sys/socket.h>
63 #include <net/ifq_var.h>
64 #include <net/if_arp.h>
65 #include <net/ethernet.h>
66 #include <net/if_dl.h>
71 #include <machine/bus.h>
73 #include <bus/usb/usb.h>
74 #include <bus/usb/usbdi.h>
75 #include <bus/usb/usbdi_util.h>
76 #include <bus/usb/usbdivar.h>
77 #include <bus/usb/usbdevs.h>
78 #include <bus/usb/usb_ethersubr.h>
80 #include "if_cuereg.h"
83 * Various supported device vendors/products.
85 Static struct cue_type cue_devs[] = {
86 { USB_VENDOR_CATC, USB_PRODUCT_CATC_NETMATE },
87 { USB_VENDOR_CATC, USB_PRODUCT_CATC_NETMATE2 },
88 { USB_VENDOR_SMARTBRIDGES, USB_PRODUCT_SMARTBRIDGES_SMARTLINK },
92 Static int cue_match(device_ptr_t);
93 Static int cue_attach(device_ptr_t);
94 Static int cue_detach(device_ptr_t);
96 Static int cue_tx_list_init(struct cue_softc *);
97 Static int cue_rx_list_init(struct cue_softc *);
98 Static int cue_newbuf(struct cue_softc *, struct cue_chain *, struct mbuf *);
99 Static int cue_encap(struct cue_softc *, struct mbuf *, int);
100 Static void cue_rxeof(usbd_xfer_handle, usbd_private_handle, usbd_status);
101 Static void cue_txeof(usbd_xfer_handle, usbd_private_handle, usbd_status);
102 Static void cue_tick(void *);
103 Static void cue_rxstart(struct ifnet *);
104 Static void cue_start(struct ifnet *);
105 Static int cue_ioctl(struct ifnet *, u_long, caddr_t, struct ucred *);
106 Static void cue_init(void *);
107 Static void cue_stop(struct cue_softc *);
108 Static void cue_watchdog(struct ifnet *);
109 Static void cue_shutdown(device_ptr_t);
111 Static void cue_setmulti(struct cue_softc *);
112 Static void cue_reset(struct cue_softc *);
114 Static int cue_csr_read_1(struct cue_softc *, int);
115 Static int cue_csr_write_1(struct cue_softc *, int, int);
116 Static int cue_csr_read_2(struct cue_softc *, int);
118 Static int cue_csr_write_2(struct cue_softc *, int, int);
120 Static int cue_mem(struct cue_softc *, int, int, void *, int);
121 Static int cue_getmac(struct cue_softc *, void *);
123 Static device_method_t cue_methods[] = {
124 /* Device interface */
125 DEVMETHOD(device_probe, cue_match),
126 DEVMETHOD(device_attach, cue_attach),
127 DEVMETHOD(device_detach, cue_detach),
128 DEVMETHOD(device_shutdown, cue_shutdown),
133 Static driver_t cue_driver = {
136 sizeof(struct cue_softc)
139 Static devclass_t cue_devclass;
141 DECLARE_DUMMY_MODULE(if_cue);
142 DRIVER_MODULE(cue, uhub, cue_driver, cue_devclass, usbd_driver_load, 0);
143 MODULE_DEPEND(cue, usb, 1, 1, 1);
145 #define CUE_SETBIT(sc, reg, x) \
146 cue_csr_write_1(sc, reg, cue_csr_read_1(sc, reg) | (x))
148 #define CUE_CLRBIT(sc, reg, x) \
149 cue_csr_write_1(sc, reg, cue_csr_read_1(sc, reg) & ~(x))
152 cue_csr_read_1(struct cue_softc *sc, int reg)
154 usb_device_request_t req;
163 req.bmRequestType = UT_READ_VENDOR_DEVICE;
164 req.bRequest = CUE_CMD_READREG;
165 USETW(req.wValue, 0);
166 USETW(req.wIndex, reg);
167 USETW(req.wLength, 1);
169 err = usbd_do_request(sc->cue_udev, &req, &val);
180 cue_csr_read_2(struct cue_softc *sc, int reg)
182 usb_device_request_t req;
191 req.bmRequestType = UT_READ_VENDOR_DEVICE;
192 req.bRequest = CUE_CMD_READREG;
193 USETW(req.wValue, 0);
194 USETW(req.wIndex, reg);
195 USETW(req.wLength, 2);
197 err = usbd_do_request(sc->cue_udev, &req, &val);
208 cue_csr_write_1(struct cue_softc *sc, int reg, int val)
210 usb_device_request_t req;
218 req.bmRequestType = UT_WRITE_VENDOR_DEVICE;
219 req.bRequest = CUE_CMD_WRITEREG;
220 USETW(req.wValue, val);
221 USETW(req.wIndex, reg);
222 USETW(req.wLength, 0);
224 err = usbd_do_request(sc->cue_udev, &req, NULL);
236 cue_csr_write_2(struct cue_softc *sc, int reg, int val)
238 usb_device_request_t req;
246 req.bmRequestType = UT_WRITE_VENDOR_DEVICE;
247 req.bRequest = CUE_CMD_WRITEREG;
248 USETW(req.wValue, val);
249 USETW(req.wIndex, reg);
250 USETW(req.wLength, 0);
252 err = usbd_do_request(sc->cue_udev, &req, NULL);
264 cue_mem(struct cue_softc *sc, int cmd, int addr, void *buf, int len)
266 usb_device_request_t req;
274 if (cmd == CUE_CMD_READSRAM)
275 req.bmRequestType = UT_READ_VENDOR_DEVICE;
277 req.bmRequestType = UT_WRITE_VENDOR_DEVICE;
279 USETW(req.wValue, 0);
280 USETW(req.wIndex, addr);
281 USETW(req.wLength, len);
283 err = usbd_do_request(sc->cue_udev, &req, buf);
294 cue_getmac(struct cue_softc *sc, void *buf)
296 usb_device_request_t req;
304 req.bmRequestType = UT_READ_VENDOR_DEVICE;
305 req.bRequest = CUE_CMD_GET_MACADDR;
306 USETW(req.wValue, 0);
307 USETW(req.wIndex, 0);
308 USETW(req.wLength, ETHER_ADDR_LEN);
310 err = usbd_do_request(sc->cue_udev, &req, buf);
315 if_printf(&sc->arpcom.ac_if, "read MAC address failed\n");
325 cue_setmulti(struct cue_softc *sc)
328 struct ifmultiaddr *ifma;
331 ifp = &sc->arpcom.ac_if;
333 if (ifp->if_flags & IFF_ALLMULTI || ifp->if_flags & IFF_PROMISC) {
334 for (i = 0; i < CUE_MCAST_TABLE_LEN; i++)
335 sc->cue_mctab[i] = 0xFF;
336 cue_mem(sc, CUE_CMD_WRITESRAM, CUE_MCAST_TABLE_ADDR,
337 &sc->cue_mctab, CUE_MCAST_TABLE_LEN);
341 /* first, zot all the existing hash bits */
342 for (i = 0; i < CUE_MCAST_TABLE_LEN; i++)
343 sc->cue_mctab[i] = 0;
345 /* now program new ones */
346 LIST_FOREACH(ifma, &ifp->if_multiaddrs, ifma_link)
348 if (ifma->ifma_addr->sa_family != AF_LINK)
351 LLADDR((struct sockaddr_dl *)ifma->ifma_addr),
352 ETHER_ADDR_LEN) & ((1 << CUE_BITS) - 1);
353 sc->cue_mctab[h >> 3] |= 1 << (h & 0x7);
357 * Also include the broadcast address in the filter
358 * so we can receive broadcast frames.
360 if (ifp->if_flags & IFF_BROADCAST) {
361 h = ether_crc32_le(ifp->if_broadcastaddr, ETHER_ADDR_LEN) &
362 ((1 << CUE_BITS) - 1);
363 sc->cue_mctab[h >> 3] |= 1 << (h & 0x7);
366 cue_mem(sc, CUE_CMD_WRITESRAM, CUE_MCAST_TABLE_ADDR,
367 &sc->cue_mctab, CUE_MCAST_TABLE_LEN);
373 cue_reset(struct cue_softc *sc)
375 usb_device_request_t req;
381 req.bmRequestType = UT_WRITE_VENDOR_DEVICE;
382 req.bRequest = CUE_CMD_RESET;
383 USETW(req.wValue, 0);
384 USETW(req.wIndex, 0);
385 USETW(req.wLength, 0);
386 err = usbd_do_request(sc->cue_udev, &req, NULL);
388 if_printf(&sc->arpcom.ac_if, "reset failed\n");
390 /* Wait a little while for the chip to get its brains in order. */
396 * Probe for a Pegasus chip.
400 USB_MATCH_START(cue, uaa);
408 if (uaa->vendor == t->cue_vid &&
409 uaa->product == t->cue_did) {
410 return(UMATCH_VENDOR_PRODUCT);
419 * Attach the interface. Allocate softc structures, do ifmedia
420 * setup and ethernet/BPF attach.
424 USB_ATTACH_START(cue, sc, uaa);
426 u_char eaddr[ETHER_ADDR_LEN];
428 usb_interface_descriptor_t *id;
429 usb_endpoint_descriptor_t *ed;
432 bzero(sc, sizeof(struct cue_softc));
433 sc->cue_iface = uaa->iface;
434 sc->cue_udev = uaa->device;
435 callout_init(&sc->cue_stat_timer);
437 if (usbd_set_config_no(sc->cue_udev, CUE_CONFIG_NO, 0)) {
438 device_printf(self, "setting config no %d failed\n",
440 USB_ATTACH_ERROR_RETURN;
443 id = usbd_get_interface_descriptor(uaa->iface);
445 usbd_devinfo(uaa->device, 0, devinfo);
446 device_set_desc_copy(self, devinfo);
447 device_printf(self, "%s\n", devinfo);
449 /* Find endpoints. */
450 for (i = 0; i < id->bNumEndpoints; i++) {
451 ed = usbd_interface2endpoint_descriptor(uaa->iface, i);
453 device_printf(self, "couldn't get ep %d\n", i);
454 USB_ATTACH_ERROR_RETURN;
456 if (UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_IN &&
457 UE_GET_XFERTYPE(ed->bmAttributes) == UE_BULK) {
458 sc->cue_ed[CUE_ENDPT_RX] = ed->bEndpointAddress;
459 } else if (UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_OUT &&
460 UE_GET_XFERTYPE(ed->bmAttributes) == UE_BULK) {
461 sc->cue_ed[CUE_ENDPT_TX] = ed->bEndpointAddress;
462 } else if (UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_IN &&
463 UE_GET_XFERTYPE(ed->bmAttributes) == UE_INTERRUPT) {
464 sc->cue_ed[CUE_ENDPT_INTR] = ed->bEndpointAddress;
470 ifp = &sc->arpcom.ac_if;
471 if_initname(ifp, device_get_name(self), device_get_unit(self));
474 /* Reset the adapter. */
478 * Get station address.
480 cue_getmac(sc, &eaddr);
483 ifp->if_mtu = ETHERMTU;
484 ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST;
485 ifp->if_ioctl = cue_ioctl;
486 ifp->if_start = cue_start;
487 ifp->if_watchdog = cue_watchdog;
488 ifp->if_init = cue_init;
489 ifp->if_baudrate = 10000000;
490 ifq_set_maxlen(&ifp->if_snd, IFQ_MAXLEN);
491 ifq_set_ready(&ifp->if_snd);
494 * Call MI attach routine.
496 ether_ifattach(ifp, eaddr);
497 usb_register_netisr();
501 USB_ATTACH_SUCCESS_RETURN;
505 cue_detach(device_ptr_t dev)
507 struct cue_softc *sc;
510 sc = device_get_softc(dev);
512 ifp = &sc->arpcom.ac_if;
515 callout_stop(&sc->cue_stat_timer);
518 if (sc->cue_ep[CUE_ENDPT_TX] != NULL)
519 usbd_abort_pipe(sc->cue_ep[CUE_ENDPT_TX]);
520 if (sc->cue_ep[CUE_ENDPT_RX] != NULL)
521 usbd_abort_pipe(sc->cue_ep[CUE_ENDPT_RX]);
522 if (sc->cue_ep[CUE_ENDPT_INTR] != NULL)
523 usbd_abort_pipe(sc->cue_ep[CUE_ENDPT_INTR]);
531 * Initialize an RX descriptor and attach an MBUF cluster.
534 cue_newbuf(struct cue_softc *sc, struct cue_chain *c, struct mbuf *m)
536 struct mbuf *m_new = NULL;
539 MGETHDR(m_new, MB_DONTWAIT, MT_DATA);
541 if_printf(&sc->arpcom.ac_if, "no memory for rx list "
542 "-- packet dropped!\n");
546 MCLGET(m_new, MB_DONTWAIT);
547 if (!(m_new->m_flags & M_EXT)) {
548 if_printf(&sc->arpcom.ac_if, "no memory for rx list "
549 "-- packet dropped!\n");
553 m_new->m_len = m_new->m_pkthdr.len = MCLBYTES;
556 m_new->m_len = m_new->m_pkthdr.len = MCLBYTES;
557 m_new->m_data = m_new->m_ext.ext_buf;
560 m_adj(m_new, ETHER_ALIGN);
567 cue_rx_list_init(struct cue_softc *sc)
569 struct cue_cdata *cd;
574 for (i = 0; i < CUE_RX_LIST_CNT; i++) {
575 c = &cd->cue_rx_chain[i];
578 if (cue_newbuf(sc, c, NULL) == ENOBUFS)
580 if (c->cue_xfer == NULL) {
581 c->cue_xfer = usbd_alloc_xfer(sc->cue_udev);
582 if (c->cue_xfer == NULL)
591 cue_tx_list_init(struct cue_softc *sc)
593 struct cue_cdata *cd;
598 for (i = 0; i < CUE_TX_LIST_CNT; i++) {
599 c = &cd->cue_tx_chain[i];
603 if (c->cue_xfer == NULL) {
604 c->cue_xfer = usbd_alloc_xfer(sc->cue_udev);
605 if (c->cue_xfer == NULL)
608 c->cue_buf = malloc(CUE_BUFSZ, M_USBDEV, M_WAITOK);
615 cue_rxstart(struct ifnet *ifp)
617 struct cue_softc *sc;
622 c = &sc->cue_cdata.cue_rx_chain[sc->cue_cdata.cue_rx_prod];
624 if (cue_newbuf(sc, c, NULL) == ENOBUFS) {
630 /* Setup new transfer. */
631 usbd_setup_xfer(c->cue_xfer, sc->cue_ep[CUE_ENDPT_RX],
632 c, mtod(c->cue_mbuf, char *), CUE_BUFSZ, USBD_SHORT_XFER_OK,
633 USBD_NO_TIMEOUT, cue_rxeof);
634 usbd_transfer(c->cue_xfer);
641 * A frame has been uploaded: pass the resulting mbuf chain up to
642 * the higher level protocols.
645 cue_rxeof(usbd_xfer_handle xfer, usbd_private_handle priv, usbd_status status)
647 struct cue_softc *sc;
657 ifp = &sc->arpcom.ac_if;
659 if (!(ifp->if_flags & IFF_RUNNING)) {
664 if (status != USBD_NORMAL_COMPLETION) {
665 if (status == USBD_NOT_STARTED || status == USBD_CANCELLED) {
669 if (usbd_ratecheck(&sc->cue_rx_notice)) {
670 if_printf(ifp, "usb error on rx: %s\n",
671 usbd_errstr(status));
673 if (status == USBD_STALLED)
674 usbd_clear_endpoint_stall(sc->cue_ep[CUE_ENDPT_RX]);
678 usbd_get_xfer_status(xfer, NULL, NULL, &total_len, NULL);
681 len = *mtod(m, u_int16_t *);
683 /* No errors; receive the packet. */
686 if (len < sizeof(struct ether_header)) {
692 m_adj(m, sizeof(u_int16_t));
693 m->m_pkthdr.rcvif = ifp;
694 m->m_pkthdr.len = m->m_len = total_len;
696 /* Put the packet on the special USB input queue. */
704 /* Setup new transfer. */
705 usbd_setup_xfer(c->cue_xfer, sc->cue_ep[CUE_ENDPT_RX],
706 c, mtod(c->cue_mbuf, char *), CUE_BUFSZ, USBD_SHORT_XFER_OK,
707 USBD_NO_TIMEOUT, cue_rxeof);
708 usbd_transfer(c->cue_xfer);
715 * A frame was downloaded to the chip. It's safe for us to clean up
720 cue_txeof(usbd_xfer_handle xfer, usbd_private_handle priv, usbd_status status)
722 struct cue_softc *sc;
730 ifp = &sc->arpcom.ac_if;
732 if (status != USBD_NORMAL_COMPLETION) {
733 if (status == USBD_NOT_STARTED || status == USBD_CANCELLED) {
737 if_printf(ifp, "usb error on tx: %s\n", usbd_errstr(status));
738 if (status == USBD_STALLED)
739 usbd_clear_endpoint_stall(sc->cue_ep[CUE_ENDPT_TX]);
745 ifp->if_flags &= ~IFF_OACTIVE;
746 usbd_get_xfer_status(c->cue_xfer, NULL, NULL, NULL, &err);
748 if (c->cue_mbuf != NULL) {
749 m_freem(c->cue_mbuf);
758 if (!ifq_is_empty(&ifp->if_snd))
759 (*ifp->if_start)(ifp);
769 struct cue_softc *sc;
779 ifp = &sc->arpcom.ac_if;
781 ifp->if_collisions += cue_csr_read_2(sc, CUE_TX_SINGLECOLL);
782 ifp->if_collisions += cue_csr_read_2(sc, CUE_TX_MULTICOLL);
783 ifp->if_collisions += cue_csr_read_2(sc, CUE_TX_EXCESSCOLL);
785 if (cue_csr_read_2(sc, CUE_RX_FRAMEERR))
788 callout_reset(&sc->cue_stat_timer, hz, cue_tick, sc);
796 cue_encap(struct cue_softc *sc, struct mbuf *m, int idx)
802 c = &sc->cue_cdata.cue_tx_chain[idx];
805 * Copy the mbuf data into a contiguous buffer, leaving two
806 * bytes at the beginning to hold the frame length.
808 m_copydata(m, 0, m->m_pkthdr.len, c->cue_buf + 2);
811 total_len = m->m_pkthdr.len + 2;
813 /* The first two bytes are the frame length */
814 c->cue_buf[0] = (u_int8_t)m->m_pkthdr.len;
815 c->cue_buf[1] = (u_int8_t)(m->m_pkthdr.len >> 8);
817 usbd_setup_xfer(c->cue_xfer, sc->cue_ep[CUE_ENDPT_TX],
818 c, c->cue_buf, total_len, 0, 10000, cue_txeof);
821 err = usbd_transfer(c->cue_xfer);
822 if (err != USBD_IN_PROGRESS) {
827 sc->cue_cdata.cue_tx_cnt++;
833 cue_start(struct ifnet *ifp)
835 struct cue_softc *sc;
836 struct mbuf *m_head = NULL;
841 if (ifp->if_flags & IFF_OACTIVE) {
846 m_head = ifq_poll(&ifp->if_snd);
847 if (m_head == NULL) {
852 if (cue_encap(sc, m_head, 0)) {
853 ifp->if_flags |= IFF_OACTIVE;
857 m_head = ifq_dequeue(&ifp->if_snd);
860 * If there's a BPF listener, bounce a copy of this frame
863 BPF_MTAP(ifp, m_head);
865 ifp->if_flags |= IFF_OACTIVE;
868 * Set a timeout in case the chip goes out to lunch.
879 struct cue_softc *sc = xsc;
880 struct ifnet *ifp = &sc->arpcom.ac_if;
885 if (ifp->if_flags & IFF_RUNNING)
891 * Cancel pending I/O and free all RX/TX buffers.
897 /* Set MAC address */
898 for (i = 0; i < ETHER_ADDR_LEN; i++)
899 cue_csr_write_1(sc, CUE_PAR0 - i, sc->arpcom.ac_enaddr[i]);
901 /* Enable RX logic. */
902 cue_csr_write_1(sc, CUE_ETHCTL, CUE_ETHCTL_RX_ON|CUE_ETHCTL_MCAST_ON);
904 /* If we want promiscuous mode, set the allframes bit. */
905 if (ifp->if_flags & IFF_PROMISC) {
906 CUE_SETBIT(sc, CUE_ETHCTL, CUE_ETHCTL_PROMISC);
908 CUE_CLRBIT(sc, CUE_ETHCTL, CUE_ETHCTL_PROMISC);
912 if (cue_tx_list_init(sc) == ENOBUFS) {
913 if_printf(ifp, "tx list init failed\n");
919 if (cue_rx_list_init(sc) == ENOBUFS) {
920 if_printf(ifp, "rx list init failed\n");
925 /* Load the multicast filter. */
929 * Set the number of RX and TX buffers that we want
930 * to reserve inside the ASIC.
932 cue_csr_write_1(sc, CUE_RX_BUFPKTS, CUE_RX_FRAMES);
933 cue_csr_write_1(sc, CUE_TX_BUFPKTS, CUE_TX_FRAMES);
935 /* Set advanced operation modes. */
936 cue_csr_write_1(sc, CUE_ADVANCED_OPMODES,
937 CUE_AOP_EMBED_RXLEN|0x01); /* 1 wait state */
939 /* Program the LED operation. */
940 cue_csr_write_1(sc, CUE_LEDCTL, CUE_LEDCTL_FOLLOW_LINK);
942 /* Open RX and TX pipes. */
943 err = usbd_open_pipe(sc->cue_iface, sc->cue_ed[CUE_ENDPT_RX],
944 USBD_EXCLUSIVE_USE, &sc->cue_ep[CUE_ENDPT_RX]);
946 if_printf(ifp, "open rx pipe failed: %s\n", usbd_errstr(err));
950 err = usbd_open_pipe(sc->cue_iface, sc->cue_ed[CUE_ENDPT_TX],
951 USBD_EXCLUSIVE_USE, &sc->cue_ep[CUE_ENDPT_TX]);
953 if_printf(ifp, "open tx pipe failed: %s\n", usbd_errstr(err));
958 /* Start up the receive pipe. */
959 for (i = 0; i < CUE_RX_LIST_CNT; i++) {
960 c = &sc->cue_cdata.cue_rx_chain[i];
961 usbd_setup_xfer(c->cue_xfer, sc->cue_ep[CUE_ENDPT_RX],
962 c, mtod(c->cue_mbuf, char *), CUE_BUFSZ,
963 USBD_SHORT_XFER_OK, USBD_NO_TIMEOUT, cue_rxeof);
964 usbd_transfer(c->cue_xfer);
967 ifp->if_flags |= IFF_RUNNING;
968 ifp->if_flags &= ~IFF_OACTIVE;
972 callout_reset(&sc->cue_stat_timer, hz, cue_tick, sc);
976 cue_ioctl(struct ifnet *ifp, u_long command, caddr_t data, struct ucred *cr)
978 struct cue_softc *sc = ifp->if_softc;
985 if (ifp->if_flags & IFF_UP) {
986 if (ifp->if_flags & IFF_RUNNING &&
987 ifp->if_flags & IFF_PROMISC &&
988 !(sc->cue_if_flags & IFF_PROMISC)) {
989 CUE_SETBIT(sc, CUE_ETHCTL, CUE_ETHCTL_PROMISC);
991 } else if (ifp->if_flags & IFF_RUNNING &&
992 !(ifp->if_flags & IFF_PROMISC) &&
993 sc->cue_if_flags & IFF_PROMISC) {
994 CUE_CLRBIT(sc, CUE_ETHCTL, CUE_ETHCTL_PROMISC);
996 } else if (!(ifp->if_flags & IFF_RUNNING))
999 if (ifp->if_flags & IFF_RUNNING)
1002 sc->cue_if_flags = ifp->if_flags;
1011 error = ether_ioctl(ifp, command, data);
1021 cue_watchdog(struct ifnet *ifp)
1023 struct cue_softc *sc;
1024 struct cue_chain *c;
1031 if_printf(ifp, "watchdog timeout\n");
1033 c = &sc->cue_cdata.cue_tx_chain[0];
1034 usbd_get_xfer_status(c->cue_xfer, NULL, NULL, NULL, &stat);
1035 cue_txeof(c->cue_xfer, c, stat);
1037 if (!ifq_is_empty(&ifp->if_snd))
1045 * Stop the adapter and free any mbufs allocated to the
1049 cue_stop(struct cue_softc *sc)
1057 ifp = &sc->arpcom.ac_if;
1060 cue_csr_write_1(sc, CUE_ETHCTL, 0);
1062 callout_stop(&sc->cue_stat_timer);
1064 /* Stop transfers. */
1065 if (sc->cue_ep[CUE_ENDPT_RX] != NULL) {
1066 err = usbd_abort_pipe(sc->cue_ep[CUE_ENDPT_RX]);
1068 if_printf(ifp, "abort rx pipe failed: %s\n",
1071 err = usbd_close_pipe(sc->cue_ep[CUE_ENDPT_RX]);
1073 if_printf(ifp, "close rx pipe failed: %s\n",
1076 sc->cue_ep[CUE_ENDPT_RX] = NULL;
1079 if (sc->cue_ep[CUE_ENDPT_TX] != NULL) {
1080 err = usbd_abort_pipe(sc->cue_ep[CUE_ENDPT_TX]);
1082 if_printf(ifp, "abort tx pipe failed: %s\n",
1085 err = usbd_close_pipe(sc->cue_ep[CUE_ENDPT_TX]);
1087 if_printf(ifp, "close tx pipe failed: %s\n",
1090 sc->cue_ep[CUE_ENDPT_TX] = NULL;
1093 if (sc->cue_ep[CUE_ENDPT_INTR] != NULL) {
1094 err = usbd_abort_pipe(sc->cue_ep[CUE_ENDPT_INTR]);
1096 if_printf(ifp, "abort intr pipe failed: %s\n",
1099 err = usbd_close_pipe(sc->cue_ep[CUE_ENDPT_INTR]);
1101 if_printf(ifp, "close intr pipe failed: %s\n",
1104 sc->cue_ep[CUE_ENDPT_INTR] = NULL;
1107 /* Free RX resources. */
1108 for (i = 0; i < CUE_RX_LIST_CNT; i++) {
1109 if (sc->cue_cdata.cue_rx_chain[i].cue_buf != NULL) {
1110 free(sc->cue_cdata.cue_rx_chain[i].cue_buf, M_USBDEV);
1111 sc->cue_cdata.cue_rx_chain[i].cue_buf = NULL;
1113 if (sc->cue_cdata.cue_rx_chain[i].cue_mbuf != NULL) {
1114 m_freem(sc->cue_cdata.cue_rx_chain[i].cue_mbuf);
1115 sc->cue_cdata.cue_rx_chain[i].cue_mbuf = NULL;
1117 if (sc->cue_cdata.cue_rx_chain[i].cue_xfer != NULL) {
1118 usbd_free_xfer(sc->cue_cdata.cue_rx_chain[i].cue_xfer);
1119 sc->cue_cdata.cue_rx_chain[i].cue_xfer = NULL;
1123 /* Free TX resources. */
1124 for (i = 0; i < CUE_TX_LIST_CNT; i++) {
1125 if (sc->cue_cdata.cue_tx_chain[i].cue_buf != NULL) {
1126 free(sc->cue_cdata.cue_tx_chain[i].cue_buf, M_USBDEV);
1127 sc->cue_cdata.cue_tx_chain[i].cue_buf = NULL;
1129 if (sc->cue_cdata.cue_tx_chain[i].cue_mbuf != NULL) {
1130 m_freem(sc->cue_cdata.cue_tx_chain[i].cue_mbuf);
1131 sc->cue_cdata.cue_tx_chain[i].cue_mbuf = NULL;
1133 if (sc->cue_cdata.cue_tx_chain[i].cue_xfer != NULL) {
1134 usbd_free_xfer(sc->cue_cdata.cue_tx_chain[i].cue_xfer);
1135 sc->cue_cdata.cue_tx_chain[i].cue_xfer = NULL;
1139 ifp->if_flags &= ~(IFF_RUNNING | IFF_OACTIVE);
1146 * Stop all chip I/O so that the kernel's probe routines don't
1147 * get confused by errant DMAs when rebooting.
1150 cue_shutdown(device_ptr_t dev)
1152 struct cue_softc *sc;
1154 sc = device_get_softc(dev);