e76867857dc07b626f15bae382eca81546536ca4
[dragonfly.git] / sys / dev / netif / emx / if_emx.c
1 /*
2  * Copyright (c) 2004 Joerg Sonnenberger <joerg@bec.de>.  All rights reserved.
3  *
4  * Copyright (c) 2001-2008, Intel Corporation
5  * All rights reserved.
6  *
7  * Redistribution and use in source and binary forms, with or without
8  * modification, are permitted provided that the following conditions are met:
9  *
10  *  1. Redistributions of source code must retain the above copyright notice,
11  *     this list of conditions and the following disclaimer.
12  *
13  *  2. Redistributions in binary form must reproduce the above copyright
14  *     notice, this list of conditions and the following disclaimer in the
15  *     documentation and/or other materials provided with the distribution.
16  *
17  *  3. Neither the name of the Intel Corporation nor the names of its
18  *     contributors may be used to endorse or promote products derived from
19  *     this software without specific prior written permission.
20  *
21  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
22  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
23  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
24  * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
25  * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
26  * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
27  * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
28  * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
29  * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
30  * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
31  * POSSIBILITY OF SUCH DAMAGE.
32  *
33  *
34  * Copyright (c) 2005 The DragonFly Project.  All rights reserved.
35  *
36  * This code is derived from software contributed to The DragonFly Project
37  * by Matthew Dillon <dillon@backplane.com>
38  *
39  * Redistribution and use in source and binary forms, with or without
40  * modification, are permitted provided that the following conditions
41  * are met:
42  *
43  * 1. Redistributions of source code must retain the above copyright
44  *    notice, this list of conditions and the following disclaimer.
45  * 2. Redistributions in binary form must reproduce the above copyright
46  *    notice, this list of conditions and the following disclaimer in
47  *    the documentation and/or other materials provided with the
48  *    distribution.
49  * 3. Neither the name of The DragonFly Project nor the names of its
50  *    contributors may be used to endorse or promote products derived
51  *    from this software without specific, prior written permission.
52  *
53  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
54  * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
55  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
56  * FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE
57  * COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
58  * INCIDENTAL, SPECIAL, EXEMPLARY OR CONSEQUENTIAL DAMAGES (INCLUDING,
59  * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
60  * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
61  * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
62  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
63  * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
64  * SUCH DAMAGE.
65  */
66
67 #include "opt_ifpoll.h"
68 #include "opt_emx.h"
69
70 #include <sys/param.h>
71 #include <sys/bus.h>
72 #include <sys/endian.h>
73 #include <sys/interrupt.h>
74 #include <sys/kernel.h>
75 #include <sys/ktr.h>
76 #include <sys/malloc.h>
77 #include <sys/mbuf.h>
78 #include <sys/proc.h>
79 #include <sys/rman.h>
80 #include <sys/serialize.h>
81 #include <sys/serialize2.h>
82 #include <sys/socket.h>
83 #include <sys/sockio.h>
84 #include <sys/sysctl.h>
85 #include <sys/systm.h>
86
87 #include <net/bpf.h>
88 #include <net/ethernet.h>
89 #include <net/if.h>
90 #include <net/if_arp.h>
91 #include <net/if_dl.h>
92 #include <net/if_media.h>
93 #include <net/ifq_var.h>
94 #include <net/toeplitz.h>
95 #include <net/toeplitz2.h>
96 #include <net/vlan/if_vlan_var.h>
97 #include <net/vlan/if_vlan_ether.h>
98 #include <net/if_poll.h>
99
100 #include <netinet/in_systm.h>
101 #include <netinet/in.h>
102 #include <netinet/ip.h>
103 #include <netinet/tcp.h>
104 #include <netinet/udp.h>
105
106 #include <bus/pci/pcivar.h>
107 #include <bus/pci/pcireg.h>
108
109 #include <dev/netif/ig_hal/e1000_api.h>
110 #include <dev/netif/ig_hal/e1000_82571.h>
111 #include <dev/netif/emx/if_emx.h>
112
113 #ifdef EMX_RSS_DEBUG
114 #define EMX_RSS_DPRINTF(sc, lvl, fmt, ...) \
115 do { \
116         if (sc->rss_debug >= lvl) \
117                 if_printf(&sc->arpcom.ac_if, fmt, __VA_ARGS__); \
118 } while (0)
119 #else   /* !EMX_RSS_DEBUG */
120 #define EMX_RSS_DPRINTF(sc, lvl, fmt, ...)      ((void)0)
121 #endif  /* EMX_RSS_DEBUG */
122
123 #define EMX_TX_SERIALIZE        1
124 #define EMX_RX_SERIALIZE        3
125
126 #define EMX_NAME        "Intel(R) PRO/1000 "
127
128 #define EMX_DEVICE(id)  \
129         { EMX_VENDOR_ID, E1000_DEV_ID_##id, EMX_NAME #id }
130 #define EMX_DEVICE_NULL { 0, 0, NULL }
131
132 static const struct emx_device {
133         uint16_t        vid;
134         uint16_t        did;
135         const char      *desc;
136 } emx_devices[] = {
137         EMX_DEVICE(82571EB_COPPER),
138         EMX_DEVICE(82571EB_FIBER),
139         EMX_DEVICE(82571EB_SERDES),
140         EMX_DEVICE(82571EB_SERDES_DUAL),
141         EMX_DEVICE(82571EB_SERDES_QUAD),
142         EMX_DEVICE(82571EB_QUAD_COPPER),
143         EMX_DEVICE(82571EB_QUAD_COPPER_BP),
144         EMX_DEVICE(82571EB_QUAD_COPPER_LP),
145         EMX_DEVICE(82571EB_QUAD_FIBER),
146         EMX_DEVICE(82571PT_QUAD_COPPER),
147
148         EMX_DEVICE(82572EI_COPPER),
149         EMX_DEVICE(82572EI_FIBER),
150         EMX_DEVICE(82572EI_SERDES),
151         EMX_DEVICE(82572EI),
152
153         EMX_DEVICE(82573E),
154         EMX_DEVICE(82573E_IAMT),
155         EMX_DEVICE(82573L),
156
157         EMX_DEVICE(80003ES2LAN_COPPER_SPT),
158         EMX_DEVICE(80003ES2LAN_SERDES_SPT),
159         EMX_DEVICE(80003ES2LAN_COPPER_DPT),
160         EMX_DEVICE(80003ES2LAN_SERDES_DPT),
161
162         EMX_DEVICE(82574L),
163         EMX_DEVICE(82574LA),
164
165         /* required last entry */
166         EMX_DEVICE_NULL
167 };
168
169 static int      emx_probe(device_t);
170 static int      emx_attach(device_t);
171 static int      emx_detach(device_t);
172 static int      emx_shutdown(device_t);
173 static int      emx_suspend(device_t);
174 static int      emx_resume(device_t);
175
176 static void     emx_init(void *);
177 static void     emx_stop(struct emx_softc *);
178 static int      emx_ioctl(struct ifnet *, u_long, caddr_t, struct ucred *);
179 static void     emx_start(struct ifnet *, struct ifaltq_subque *);
180 #ifdef IFPOLL_ENABLE
181 static void     emx_npoll(struct ifnet *, struct ifpoll_info *);
182 static void     emx_npoll_status(struct ifnet *);
183 static void     emx_npoll_tx(struct ifnet *, void *, int);
184 static void     emx_npoll_rx(struct ifnet *, void *, int);
185 #endif
186 static void     emx_watchdog(struct ifaltq_subque *);
187 static void     emx_media_status(struct ifnet *, struct ifmediareq *);
188 static int      emx_media_change(struct ifnet *);
189 static void     emx_timer(void *);
190 static void     emx_serialize(struct ifnet *, enum ifnet_serialize);
191 static void     emx_deserialize(struct ifnet *, enum ifnet_serialize);
192 static int      emx_tryserialize(struct ifnet *, enum ifnet_serialize);
193 #ifdef INVARIANTS
194 static void     emx_serialize_assert(struct ifnet *, enum ifnet_serialize,
195                     boolean_t);
196 #endif
197
198 static void     emx_intr(void *);
199 static void     emx_intr_mask(void *);
200 static void     emx_intr_body(struct emx_softc *, boolean_t);
201 static void     emx_rxeof(struct emx_rxdata *, int);
202 static void     emx_txeof(struct emx_txdata *);
203 static void     emx_tx_collect(struct emx_txdata *);
204 static void     emx_tx_purge(struct emx_softc *);
205 static void     emx_enable_intr(struct emx_softc *);
206 static void     emx_disable_intr(struct emx_softc *);
207
208 static int      emx_dma_alloc(struct emx_softc *);
209 static void     emx_dma_free(struct emx_softc *);
210 static void     emx_init_tx_ring(struct emx_txdata *);
211 static int      emx_init_rx_ring(struct emx_rxdata *);
212 static void     emx_free_tx_ring(struct emx_txdata *);
213 static void     emx_free_rx_ring(struct emx_rxdata *);
214 static int      emx_create_tx_ring(struct emx_txdata *);
215 static int      emx_create_rx_ring(struct emx_rxdata *);
216 static void     emx_destroy_tx_ring(struct emx_txdata *, int);
217 static void     emx_destroy_rx_ring(struct emx_rxdata *, int);
218 static int      emx_newbuf(struct emx_rxdata *, int, int);
219 static int      emx_encap(struct emx_txdata *, struct mbuf **, int *, int *);
220 static int      emx_txcsum(struct emx_txdata *, struct mbuf *,
221                     uint32_t *, uint32_t *);
222 static int      emx_tso_pullup(struct emx_txdata *, struct mbuf **);
223 static int      emx_tso_setup(struct emx_txdata *, struct mbuf *,
224                     uint32_t *, uint32_t *);
225 static int      emx_get_txring_inuse(const struct emx_softc *, boolean_t);
226
227 static int      emx_is_valid_eaddr(const uint8_t *);
228 static int      emx_reset(struct emx_softc *);
229 static void     emx_setup_ifp(struct emx_softc *);
230 static void     emx_init_tx_unit(struct emx_softc *);
231 static void     emx_init_rx_unit(struct emx_softc *);
232 static void     emx_update_stats(struct emx_softc *);
233 static void     emx_set_promisc(struct emx_softc *);
234 static void     emx_disable_promisc(struct emx_softc *);
235 static void     emx_set_multi(struct emx_softc *);
236 static void     emx_update_link_status(struct emx_softc *);
237 static void     emx_smartspeed(struct emx_softc *);
238 static void     emx_set_itr(struct emx_softc *, uint32_t);
239 static void     emx_disable_aspm(struct emx_softc *);
240
241 static void     emx_print_debug_info(struct emx_softc *);
242 static void     emx_print_nvm_info(struct emx_softc *);
243 static void     emx_print_hw_stats(struct emx_softc *);
244
245 static int      emx_sysctl_stats(SYSCTL_HANDLER_ARGS);
246 static int      emx_sysctl_debug_info(SYSCTL_HANDLER_ARGS);
247 static int      emx_sysctl_int_throttle(SYSCTL_HANDLER_ARGS);
248 static int      emx_sysctl_tx_intr_nsegs(SYSCTL_HANDLER_ARGS);
249 static int      emx_sysctl_tx_wreg_nsegs(SYSCTL_HANDLER_ARGS);
250 #ifdef IFPOLL_ENABLE
251 static int      emx_sysctl_npoll_rxoff(SYSCTL_HANDLER_ARGS);
252 static int      emx_sysctl_npoll_txoff(SYSCTL_HANDLER_ARGS);
253 #endif
254 static void     emx_add_sysctl(struct emx_softc *);
255
256 static void     emx_serialize_skipmain(struct emx_softc *);
257 static void     emx_deserialize_skipmain(struct emx_softc *);
258
259 /* Management and WOL Support */
260 static void     emx_get_mgmt(struct emx_softc *);
261 static void     emx_rel_mgmt(struct emx_softc *);
262 static void     emx_get_hw_control(struct emx_softc *);
263 static void     emx_rel_hw_control(struct emx_softc *);
264 static void     emx_enable_wol(device_t);
265
266 static device_method_t emx_methods[] = {
267         /* Device interface */
268         DEVMETHOD(device_probe,         emx_probe),
269         DEVMETHOD(device_attach,        emx_attach),
270         DEVMETHOD(device_detach,        emx_detach),
271         DEVMETHOD(device_shutdown,      emx_shutdown),
272         DEVMETHOD(device_suspend,       emx_suspend),
273         DEVMETHOD(device_resume,        emx_resume),
274         { 0, 0 }
275 };
276
277 static driver_t emx_driver = {
278         "emx",
279         emx_methods,
280         sizeof(struct emx_softc),
281 };
282
283 static devclass_t emx_devclass;
284
285 DECLARE_DUMMY_MODULE(if_emx);
286 MODULE_DEPEND(emx, ig_hal, 1, 1, 1);
287 DRIVER_MODULE(if_emx, pci, emx_driver, emx_devclass, NULL, NULL);
288
289 /*
290  * Tunables
291  */
292 static int      emx_int_throttle_ceil = EMX_DEFAULT_ITR;
293 static int      emx_rxd = EMX_DEFAULT_RXD;
294 static int      emx_txd = EMX_DEFAULT_TXD;
295 static int      emx_smart_pwr_down = 0;
296 static int      emx_rxr = 0;
297 static int      emx_txr = 1;
298
299 /* Controls whether promiscuous also shows bad packets */
300 static int      emx_debug_sbp = 0;
301
302 static int      emx_82573_workaround = 1;
303 static int      emx_msi_enable = 1;
304
305 TUNABLE_INT("hw.emx.int_throttle_ceil", &emx_int_throttle_ceil);
306 TUNABLE_INT("hw.emx.rxd", &emx_rxd);
307 TUNABLE_INT("hw.emx.rxr", &emx_rxr);
308 TUNABLE_INT("hw.emx.txd", &emx_txd);
309 TUNABLE_INT("hw.emx.txr", &emx_txr);
310 TUNABLE_INT("hw.emx.smart_pwr_down", &emx_smart_pwr_down);
311 TUNABLE_INT("hw.emx.sbp", &emx_debug_sbp);
312 TUNABLE_INT("hw.emx.82573_workaround", &emx_82573_workaround);
313 TUNABLE_INT("hw.emx.msi.enable", &emx_msi_enable);
314
315 /* Global used in WOL setup with multiport cards */
316 static int      emx_global_quad_port_a = 0;
317
318 /* Set this to one to display debug statistics */
319 static int      emx_display_debug_stats = 0;
320
321 #if !defined(KTR_IF_EMX)
322 #define KTR_IF_EMX      KTR_ALL
323 #endif
324 KTR_INFO_MASTER(if_emx);
325 KTR_INFO(KTR_IF_EMX, if_emx, intr_beg, 0, "intr begin");
326 KTR_INFO(KTR_IF_EMX, if_emx, intr_end, 1, "intr end");
327 KTR_INFO(KTR_IF_EMX, if_emx, pkt_receive, 4, "rx packet");
328 KTR_INFO(KTR_IF_EMX, if_emx, pkt_txqueue, 5, "tx packet");
329 KTR_INFO(KTR_IF_EMX, if_emx, pkt_txclean, 6, "tx clean");
330 #define logif(name)     KTR_LOG(if_emx_ ## name)
331
332 static __inline void
333 emx_setup_rxdesc(emx_rxdesc_t *rxd, const struct emx_rxbuf *rxbuf)
334 {
335         rxd->rxd_bufaddr = htole64(rxbuf->paddr);
336         /* DD bit must be cleared */
337         rxd->rxd_staterr = 0;
338 }
339
340 static __inline void
341 emx_rxcsum(uint32_t staterr, struct mbuf *mp)
342 {
343         /* Ignore Checksum bit is set */
344         if (staterr & E1000_RXD_STAT_IXSM)
345                 return;
346
347         if ((staterr & (E1000_RXD_STAT_IPCS | E1000_RXDEXT_STATERR_IPE)) ==
348             E1000_RXD_STAT_IPCS)
349                 mp->m_pkthdr.csum_flags |= CSUM_IP_CHECKED | CSUM_IP_VALID;
350
351         if ((staterr & (E1000_RXD_STAT_TCPCS | E1000_RXDEXT_STATERR_TCPE)) ==
352             E1000_RXD_STAT_TCPCS) {
353                 mp->m_pkthdr.csum_flags |= CSUM_DATA_VALID |
354                                            CSUM_PSEUDO_HDR |
355                                            CSUM_FRAG_NOT_CHECKED;
356                 mp->m_pkthdr.csum_data = htons(0xffff);
357         }
358 }
359
360 static __inline struct pktinfo *
361 emx_rssinfo(struct mbuf *m, struct pktinfo *pi,
362             uint32_t mrq, uint32_t hash, uint32_t staterr)
363 {
364         switch (mrq & EMX_RXDMRQ_RSSTYPE_MASK) {
365         case EMX_RXDMRQ_IPV4_TCP:
366                 pi->pi_netisr = NETISR_IP;
367                 pi->pi_flags = 0;
368                 pi->pi_l3proto = IPPROTO_TCP;
369                 break;
370
371         case EMX_RXDMRQ_IPV6_TCP:
372                 pi->pi_netisr = NETISR_IPV6;
373                 pi->pi_flags = 0;
374                 pi->pi_l3proto = IPPROTO_TCP;
375                 break;
376
377         case EMX_RXDMRQ_IPV4:
378                 if (staterr & E1000_RXD_STAT_IXSM)
379                         return NULL;
380
381                 if ((staterr &
382                      (E1000_RXD_STAT_TCPCS | E1000_RXDEXT_STATERR_TCPE)) ==
383                     E1000_RXD_STAT_TCPCS) {
384                         pi->pi_netisr = NETISR_IP;
385                         pi->pi_flags = 0;
386                         pi->pi_l3proto = IPPROTO_UDP;
387                         break;
388                 }
389                 /* FALL THROUGH */
390         default:
391                 return NULL;
392         }
393
394         m->m_flags |= M_HASH;
395         m->m_pkthdr.hash = toeplitz_hash(hash);
396         return pi;
397 }
398
399 static int
400 emx_probe(device_t dev)
401 {
402         const struct emx_device *d;
403         uint16_t vid, did;
404
405         vid = pci_get_vendor(dev);
406         did = pci_get_device(dev);
407
408         for (d = emx_devices; d->desc != NULL; ++d) {
409                 if (vid == d->vid && did == d->did) {
410                         device_set_desc(dev, d->desc);
411                         device_set_async_attach(dev, TRUE);
412                         return 0;
413                 }
414         }
415         return ENXIO;
416 }
417
418 static int
419 emx_attach(device_t dev)
420 {
421         struct emx_softc *sc = device_get_softc(dev);
422         struct ifnet *ifp = &sc->arpcom.ac_if;
423         int error = 0, i, throttle, msi_enable, tx_ring_max;
424         u_int intr_flags;
425         uint16_t eeprom_data, device_id, apme_mask;
426         driver_intr_t *intr_func;
427 #ifdef IFPOLL_ENABLE
428         int offset, offset_def;
429 #endif
430
431         /*
432          * Setup RX rings
433          */
434         for (i = 0; i < EMX_NRX_RING; ++i) {
435                 sc->rx_data[i].sc = sc;
436                 sc->rx_data[i].idx = i;
437         }
438
439         /*
440          * Setup TX ring
441          */
442         for (i = 0; i < EMX_NTX_RING; ++i) {
443                 sc->tx_data[i].sc = sc;
444                 sc->tx_data[i].idx = i;
445         }
446
447         /*
448          * Initialize serializers
449          */
450         lwkt_serialize_init(&sc->main_serialize);
451         for (i = 0; i < EMX_NTX_RING; ++i)
452                 lwkt_serialize_init(&sc->tx_data[i].tx_serialize);
453         for (i = 0; i < EMX_NRX_RING; ++i)
454                 lwkt_serialize_init(&sc->rx_data[i].rx_serialize);
455
456         /*
457          * Initialize serializer array
458          */
459         i = 0;
460         sc->serializes[i++] = &sc->main_serialize;
461
462         KKASSERT(i == EMX_TX_SERIALIZE);
463         sc->serializes[i++] = &sc->tx_data[0].tx_serialize;
464         sc->serializes[i++] = &sc->tx_data[1].tx_serialize;
465
466         KKASSERT(i == EMX_RX_SERIALIZE);
467         sc->serializes[i++] = &sc->rx_data[0].rx_serialize;
468         sc->serializes[i++] = &sc->rx_data[1].rx_serialize;
469         KKASSERT(i == EMX_NSERIALIZE);
470
471         callout_init_mp(&sc->timer);
472
473         sc->dev = sc->osdep.dev = dev;
474
475         /*
476          * Determine hardware and mac type
477          */
478         sc->hw.vendor_id = pci_get_vendor(dev);
479         sc->hw.device_id = pci_get_device(dev);
480         sc->hw.revision_id = pci_get_revid(dev);
481         sc->hw.subsystem_vendor_id = pci_get_subvendor(dev);
482         sc->hw.subsystem_device_id = pci_get_subdevice(dev);
483
484         if (e1000_set_mac_type(&sc->hw))
485                 return ENXIO;
486
487         /* Enable bus mastering */
488         pci_enable_busmaster(dev);
489
490         /*
491          * Allocate IO memory
492          */
493         sc->memory_rid = EMX_BAR_MEM;
494         sc->memory = bus_alloc_resource_any(dev, SYS_RES_MEMORY,
495                                             &sc->memory_rid, RF_ACTIVE);
496         if (sc->memory == NULL) {
497                 device_printf(dev, "Unable to allocate bus resource: memory\n");
498                 error = ENXIO;
499                 goto fail;
500         }
501         sc->osdep.mem_bus_space_tag = rman_get_bustag(sc->memory);
502         sc->osdep.mem_bus_space_handle = rman_get_bushandle(sc->memory);
503
504         /* XXX This is quite goofy, it is not actually used */
505         sc->hw.hw_addr = (uint8_t *)&sc->osdep.mem_bus_space_handle;
506
507         /*
508          * Don't enable MSI-X on 82574, see:
509          * 82574 specification update errata #15
510          *
511          * Don't enable MSI on 82571/82572, see:
512          * 82571/82572 specification update errata #63
513          */
514         msi_enable = emx_msi_enable;
515         if (msi_enable &&
516             (sc->hw.mac.type == e1000_82571 ||
517              sc->hw.mac.type == e1000_82572))
518                 msi_enable = 0;
519
520         /*
521          * Allocate interrupt
522          */
523         sc->intr_type = pci_alloc_1intr(dev, msi_enable,
524             &sc->intr_rid, &intr_flags);
525
526         if (sc->intr_type == PCI_INTR_TYPE_LEGACY) {
527                 int unshared;
528
529                 unshared = device_getenv_int(dev, "irq.unshared", 0);
530                 if (!unshared) {
531                         sc->flags |= EMX_FLAG_SHARED_INTR;
532                         if (bootverbose)
533                                 device_printf(dev, "IRQ shared\n");
534                 } else {
535                         intr_flags &= ~RF_SHAREABLE;
536                         if (bootverbose)
537                                 device_printf(dev, "IRQ unshared\n");
538                 }
539         }
540
541         sc->intr_res = bus_alloc_resource_any(dev, SYS_RES_IRQ, &sc->intr_rid,
542             intr_flags);
543         if (sc->intr_res == NULL) {
544                 device_printf(dev, "Unable to allocate bus resource: "
545                     "interrupt\n");
546                 error = ENXIO;
547                 goto fail;
548         }
549
550         /* Save PCI command register for Shared Code */
551         sc->hw.bus.pci_cmd_word = pci_read_config(dev, PCIR_COMMAND, 2);
552         sc->hw.back = &sc->osdep;
553
554         /* Do Shared Code initialization */
555         if (e1000_setup_init_funcs(&sc->hw, TRUE)) {
556                 device_printf(dev, "Setup of Shared code failed\n");
557                 error = ENXIO;
558                 goto fail;
559         }
560         e1000_get_bus_info(&sc->hw);
561
562         sc->hw.mac.autoneg = EMX_DO_AUTO_NEG;
563         sc->hw.phy.autoneg_wait_to_complete = FALSE;
564         sc->hw.phy.autoneg_advertised = EMX_AUTONEG_ADV_DEFAULT;
565
566         /*
567          * Interrupt throttle rate
568          */
569         throttle = device_getenv_int(dev, "int_throttle_ceil",
570             emx_int_throttle_ceil);
571         if (throttle == 0) {
572                 sc->int_throttle_ceil = 0;
573         } else {
574                 if (throttle < 0)
575                         throttle = EMX_DEFAULT_ITR;
576
577                 /* Recalculate the tunable value to get the exact frequency. */
578                 throttle = 1000000000 / 256 / throttle;
579
580                 /* Upper 16bits of ITR is reserved and should be zero */
581                 if (throttle & 0xffff0000)
582                         throttle = 1000000000 / 256 / EMX_DEFAULT_ITR;
583
584                 sc->int_throttle_ceil = 1000000000 / 256 / throttle;
585         }
586
587         e1000_init_script_state_82541(&sc->hw, TRUE);
588         e1000_set_tbi_compatibility_82543(&sc->hw, TRUE);
589
590         /* Copper options */
591         if (sc->hw.phy.media_type == e1000_media_type_copper) {
592                 sc->hw.phy.mdix = EMX_AUTO_ALL_MODES;
593                 sc->hw.phy.disable_polarity_correction = FALSE;
594                 sc->hw.phy.ms_type = EMX_MASTER_SLAVE;
595         }
596
597         /* Set the frame limits assuming standard ethernet sized frames. */
598         sc->max_frame_size = ETHERMTU + ETHER_HDR_LEN + ETHER_CRC_LEN;
599         sc->min_frame_size = ETHER_MIN_LEN;
600
601         /* This controls when hardware reports transmit completion status. */
602         sc->hw.mac.report_tx_early = 1;
603
604         /* Calculate # of RX rings */
605         sc->rx_ring_cnt = device_getenv_int(dev, "rxr", emx_rxr);
606         sc->rx_ring_cnt = if_ring_count2(sc->rx_ring_cnt, EMX_NRX_RING);
607
608         /*
609          * Calculate # of TX rings
610          *
611          * NOTE:
612          * Don't enable multiple TX queues on 82574; it always gives
613          * watchdog timeout when multiple TCP streams are received.
614          */
615         tx_ring_max = 1;
616         if (sc->hw.mac.type == e1000_82571 ||
617             sc->hw.mac.type == e1000_82572 ||
618             sc->hw.mac.type == e1000_80003es2lan)
619                 tx_ring_max = EMX_NTX_RING;
620         sc->tx_ring_cnt = device_getenv_int(dev, "txr", emx_txr);
621         sc->tx_ring_cnt = if_ring_count2(sc->tx_ring_cnt, tx_ring_max);
622
623         /* Allocate RX/TX rings' busdma(9) stuffs */
624         error = emx_dma_alloc(sc);
625         if (error)
626                 goto fail;
627
628         /* Allocate multicast array memory. */
629         sc->mta = kmalloc(ETH_ADDR_LEN * EMX_MCAST_ADDR_MAX,
630             M_DEVBUF, M_WAITOK);
631
632         /* Indicate SOL/IDER usage */
633         if (e1000_check_reset_block(&sc->hw)) {
634                 device_printf(dev,
635                     "PHY reset is blocked due to SOL/IDER session.\n");
636         }
637
638         /*
639          * Start from a known state, this is important in reading the
640          * nvm and mac from that.
641          */
642         e1000_reset_hw(&sc->hw);
643
644         /* Make sure we have a good EEPROM before we read from it */
645         if (e1000_validate_nvm_checksum(&sc->hw) < 0) {
646                 /*
647                  * Some PCI-E parts fail the first check due to
648                  * the link being in sleep state, call it again,
649                  * if it fails a second time its a real issue.
650                  */
651                 if (e1000_validate_nvm_checksum(&sc->hw) < 0) {
652                         device_printf(dev,
653                             "The EEPROM Checksum Is Not Valid\n");
654                         error = EIO;
655                         goto fail;
656                 }
657         }
658
659         /* Copy the permanent MAC address out of the EEPROM */
660         if (e1000_read_mac_addr(&sc->hw) < 0) {
661                 device_printf(dev, "EEPROM read error while reading MAC"
662                     " address\n");
663                 error = EIO;
664                 goto fail;
665         }
666         if (!emx_is_valid_eaddr(sc->hw.mac.addr)) {
667                 device_printf(dev, "Invalid MAC address\n");
668                 error = EIO;
669                 goto fail;
670         }
671
672         /* Determine if we have to control management hardware */
673         if (e1000_enable_mng_pass_thru(&sc->hw))
674                 sc->flags |= EMX_FLAG_HAS_MGMT;
675
676         /*
677          * Setup Wake-on-Lan
678          */
679         apme_mask = EMX_EEPROM_APME;
680         eeprom_data = 0;
681         switch (sc->hw.mac.type) {
682         case e1000_82573:
683                 sc->flags |= EMX_FLAG_HAS_AMT;
684                 /* FALL THROUGH */
685
686         case e1000_82571:
687         case e1000_82572:
688         case e1000_80003es2lan:
689                 if (sc->hw.bus.func == 1) {
690                         e1000_read_nvm(&sc->hw,
691                             NVM_INIT_CONTROL3_PORT_B, 1, &eeprom_data);
692                 } else {
693                         e1000_read_nvm(&sc->hw,
694                             NVM_INIT_CONTROL3_PORT_A, 1, &eeprom_data);
695                 }
696                 break;
697
698         default:
699                 e1000_read_nvm(&sc->hw,
700                     NVM_INIT_CONTROL3_PORT_A, 1, &eeprom_data);
701                 break;
702         }
703         if (eeprom_data & apme_mask)
704                 sc->wol = E1000_WUFC_MAG | E1000_WUFC_MC;
705
706         /*
707          * We have the eeprom settings, now apply the special cases
708          * where the eeprom may be wrong or the board won't support
709          * wake on lan on a particular port
710          */
711         device_id = pci_get_device(dev);
712         switch (device_id) {
713         case E1000_DEV_ID_82571EB_FIBER:
714                 /*
715                  * Wake events only supported on port A for dual fiber
716                  * regardless of eeprom setting
717                  */
718                 if (E1000_READ_REG(&sc->hw, E1000_STATUS) &
719                     E1000_STATUS_FUNC_1)
720                         sc->wol = 0;
721                 break;
722
723         case E1000_DEV_ID_82571EB_QUAD_COPPER:
724         case E1000_DEV_ID_82571EB_QUAD_FIBER:
725         case E1000_DEV_ID_82571EB_QUAD_COPPER_LP:
726                 /* if quad port sc, disable WoL on all but port A */
727                 if (emx_global_quad_port_a != 0)
728                         sc->wol = 0;
729                 /* Reset for multiple quad port adapters */
730                 if (++emx_global_quad_port_a == 4)
731                         emx_global_quad_port_a = 0;
732                 break;
733         }
734
735         /* XXX disable wol */
736         sc->wol = 0;
737
738 #ifdef IFPOLL_ENABLE
739         /*
740          * NPOLLING RX CPU offset
741          */
742         if (sc->rx_ring_cnt == ncpus2) {
743                 offset = 0;
744         } else {
745                 offset_def = (sc->rx_ring_cnt * device_get_unit(dev)) % ncpus2;
746                 offset = device_getenv_int(dev, "npoll.rxoff", offset_def);
747                 if (offset >= ncpus2 ||
748                     offset % sc->rx_ring_cnt != 0) {
749                         device_printf(dev, "invalid npoll.rxoff %d, use %d\n",
750                             offset, offset_def);
751                         offset = offset_def;
752                 }
753         }
754         sc->rx_npoll_off = offset;
755
756         /*
757          * NPOLLING TX CPU offset
758          */
759         if (sc->tx_ring_cnt == ncpus2) {
760                 offset = 0;
761         } else {
762                 offset_def = (sc->tx_ring_cnt * device_get_unit(dev)) % ncpus2;
763                 offset = device_getenv_int(dev, "npoll.txoff", offset_def);
764                 if (offset >= ncpus2 ||
765                     offset % sc->tx_ring_cnt != 0) {
766                         device_printf(dev, "invalid npoll.txoff %d, use %d\n",
767                             offset, offset_def);
768                         offset = offset_def;
769                 }
770         }
771         sc->tx_npoll_off = offset;
772 #endif
773
774         /* Setup OS specific network interface */
775         emx_setup_ifp(sc);
776
777         /* Add sysctl tree, must after em_setup_ifp() */
778         emx_add_sysctl(sc);
779
780         /* Reset the hardware */
781         error = emx_reset(sc);
782         if (error) {
783                 device_printf(dev, "Unable to reset the hardware\n");
784                 goto fail;
785         }
786
787         /* Initialize statistics */
788         emx_update_stats(sc);
789
790         sc->hw.mac.get_link_status = 1;
791         emx_update_link_status(sc);
792
793         /* Non-AMT based hardware can now take control from firmware */
794         if ((sc->flags & (EMX_FLAG_HAS_MGMT | EMX_FLAG_HAS_AMT)) ==
795             EMX_FLAG_HAS_MGMT)
796                 emx_get_hw_control(sc);
797
798         /*
799          * Missing Interrupt Following ICR read:
800          *
801          * 82571/82572 specification update errata #76
802          * 82573 specification update errata #31
803          * 82574 specification update errata #12
804          */
805         intr_func = emx_intr;
806         if ((sc->flags & EMX_FLAG_SHARED_INTR) &&
807             (sc->hw.mac.type == e1000_82571 ||
808              sc->hw.mac.type == e1000_82572 ||
809              sc->hw.mac.type == e1000_82573 ||
810              sc->hw.mac.type == e1000_82574))
811                 intr_func = emx_intr_mask;
812
813         error = bus_setup_intr(dev, sc->intr_res, INTR_MPSAFE, intr_func, sc,
814                                &sc->intr_tag, &sc->main_serialize);
815         if (error) {
816                 device_printf(dev, "Failed to register interrupt handler");
817                 ether_ifdetach(&sc->arpcom.ac_if);
818                 goto fail;
819         }
820
821         sc->tx_ring_inuse = emx_get_txring_inuse(sc, FALSE);
822         for (i = 0; i < sc->tx_ring_cnt; ++i) {
823                 struct ifaltq_subque *ifsq = ifq_get_subq(&ifp->if_snd, i);
824                 struct emx_txdata *tdata = &sc->tx_data[i];
825
826                 ifsq_set_cpuid(ifsq, rman_get_cpuid(sc->intr_res));
827                 ifsq_set_priv(ifsq, tdata);
828                 tdata->ifsq = ifsq;
829
830                 ifsq_watchdog_init(&tdata->tx_watchdog, ifsq, emx_watchdog);
831         }
832         return (0);
833 fail:
834         emx_detach(dev);
835         return (error);
836 }
837
838 static int
839 emx_detach(device_t dev)
840 {
841         struct emx_softc *sc = device_get_softc(dev);
842
843         if (device_is_attached(dev)) {
844                 struct ifnet *ifp = &sc->arpcom.ac_if;
845
846                 ifnet_serialize_all(ifp);
847
848                 emx_stop(sc);
849
850                 e1000_phy_hw_reset(&sc->hw);
851
852                 emx_rel_mgmt(sc);
853                 emx_rel_hw_control(sc);
854
855                 if (sc->wol) {
856                         E1000_WRITE_REG(&sc->hw, E1000_WUC, E1000_WUC_PME_EN);
857                         E1000_WRITE_REG(&sc->hw, E1000_WUFC, sc->wol);
858                         emx_enable_wol(dev);
859                 }
860
861                 bus_teardown_intr(dev, sc->intr_res, sc->intr_tag);
862
863                 ifnet_deserialize_all(ifp);
864
865                 ether_ifdetach(ifp);
866         } else if (sc->memory != NULL) {
867                 emx_rel_hw_control(sc);
868         }
869         bus_generic_detach(dev);
870
871         if (sc->intr_res != NULL) {
872                 bus_release_resource(dev, SYS_RES_IRQ, sc->intr_rid,
873                                      sc->intr_res);
874         }
875
876         if (sc->intr_type == PCI_INTR_TYPE_MSI)
877                 pci_release_msi(dev);
878
879         if (sc->memory != NULL) {
880                 bus_release_resource(dev, SYS_RES_MEMORY, sc->memory_rid,
881                                      sc->memory);
882         }
883
884         emx_dma_free(sc);
885
886         /* Free sysctl tree */
887         if (sc->sysctl_tree != NULL)
888                 sysctl_ctx_free(&sc->sysctl_ctx);
889
890         if (sc->mta != NULL)
891                 kfree(sc->mta, M_DEVBUF);
892
893         return (0);
894 }
895
896 static int
897 emx_shutdown(device_t dev)
898 {
899         return emx_suspend(dev);
900 }
901
902 static int
903 emx_suspend(device_t dev)
904 {
905         struct emx_softc *sc = device_get_softc(dev);
906         struct ifnet *ifp = &sc->arpcom.ac_if;
907
908         ifnet_serialize_all(ifp);
909
910         emx_stop(sc);
911
912         emx_rel_mgmt(sc);
913         emx_rel_hw_control(sc);
914
915         if (sc->wol) {
916                 E1000_WRITE_REG(&sc->hw, E1000_WUC, E1000_WUC_PME_EN);
917                 E1000_WRITE_REG(&sc->hw, E1000_WUFC, sc->wol);
918                 emx_enable_wol(dev);
919         }
920
921         ifnet_deserialize_all(ifp);
922
923         return bus_generic_suspend(dev);
924 }
925
926 static int
927 emx_resume(device_t dev)
928 {
929         struct emx_softc *sc = device_get_softc(dev);
930         struct ifnet *ifp = &sc->arpcom.ac_if;
931         int i;
932
933         ifnet_serialize_all(ifp);
934
935         emx_init(sc);
936         emx_get_mgmt(sc);
937         for (i = 0; i < sc->tx_ring_inuse; ++i)
938                 ifsq_devstart_sched(sc->tx_data[i].ifsq);
939
940         ifnet_deserialize_all(ifp);
941
942         return bus_generic_resume(dev);
943 }
944
945 static void
946 emx_start(struct ifnet *ifp, struct ifaltq_subque *ifsq)
947 {
948         struct emx_softc *sc = ifp->if_softc;
949         struct emx_txdata *tdata = ifsq_get_priv(ifsq);
950         struct mbuf *m_head;
951         int idx = -1, nsegs = 0;
952
953         KKASSERT(tdata->ifsq == ifsq);
954         ASSERT_SERIALIZED(&tdata->tx_serialize);
955
956         if ((ifp->if_flags & IFF_RUNNING) == 0 || ifsq_is_oactive(ifsq))
957                 return;
958
959         if (!sc->link_active || (tdata->tx_flags & EMX_TXFLAG_ENABLED) == 0) {
960                 ifsq_purge(ifsq);
961                 return;
962         }
963
964         while (!ifsq_is_empty(ifsq)) {
965                 /* Now do we at least have a minimal? */
966                 if (EMX_IS_OACTIVE(tdata)) {
967                         emx_tx_collect(tdata);
968                         if (EMX_IS_OACTIVE(tdata)) {
969                                 ifsq_set_oactive(ifsq);
970                                 break;
971                         }
972                 }
973
974                 logif(pkt_txqueue);
975                 m_head = ifsq_dequeue(ifsq, NULL);
976                 if (m_head == NULL)
977                         break;
978
979                 if (emx_encap(tdata, &m_head, &nsegs, &idx)) {
980                         ifp->if_oerrors++;
981                         emx_tx_collect(tdata);
982                         continue;
983                 }
984
985                 if (nsegs >= tdata->tx_wreg_nsegs) {
986                         E1000_WRITE_REG(&sc->hw, E1000_TDT(tdata->idx), idx);
987                         nsegs = 0;
988                         idx = -1;
989                 }
990
991                 /* Send a copy of the frame to the BPF listener */
992                 ETHER_BPF_MTAP(ifp, m_head);
993
994                 /* Set timeout in case hardware has problems transmitting. */
995                 tdata->tx_watchdog.wd_timer = EMX_TX_TIMEOUT;
996         }
997         if (idx >= 0)
998                 E1000_WRITE_REG(&sc->hw, E1000_TDT(tdata->idx), idx);
999 }
1000
1001 static int
1002 emx_ioctl(struct ifnet *ifp, u_long command, caddr_t data, struct ucred *cr)
1003 {
1004         struct emx_softc *sc = ifp->if_softc;
1005         struct ifreq *ifr = (struct ifreq *)data;
1006         uint16_t eeprom_data = 0;
1007         int max_frame_size, mask, reinit;
1008         int error = 0;
1009
1010         ASSERT_IFNET_SERIALIZED_ALL(ifp);
1011
1012         switch (command) {
1013         case SIOCSIFMTU:
1014                 switch (sc->hw.mac.type) {
1015                 case e1000_82573:
1016                         /*
1017                          * 82573 only supports jumbo frames
1018                          * if ASPM is disabled.
1019                          */
1020                         e1000_read_nvm(&sc->hw, NVM_INIT_3GIO_3, 1,
1021                                        &eeprom_data);
1022                         if (eeprom_data & NVM_WORD1A_ASPM_MASK) {
1023                                 max_frame_size = ETHER_MAX_LEN;
1024                                 break;
1025                         }
1026                         /* FALL THROUGH */
1027
1028                 /* Limit Jumbo Frame size */
1029                 case e1000_82571:
1030                 case e1000_82572:
1031                 case e1000_82574:
1032                 case e1000_80003es2lan:
1033                         max_frame_size = 9234;
1034                         break;
1035
1036                 default:
1037                         max_frame_size = MAX_JUMBO_FRAME_SIZE;
1038                         break;
1039                 }
1040                 if (ifr->ifr_mtu > max_frame_size - ETHER_HDR_LEN -
1041                     ETHER_CRC_LEN) {
1042                         error = EINVAL;
1043                         break;
1044                 }
1045
1046                 ifp->if_mtu = ifr->ifr_mtu;
1047                 sc->max_frame_size = ifp->if_mtu + ETHER_HDR_LEN +
1048                                      ETHER_CRC_LEN;
1049
1050                 if (ifp->if_flags & IFF_RUNNING)
1051                         emx_init(sc);
1052                 break;
1053
1054         case SIOCSIFFLAGS:
1055                 if (ifp->if_flags & IFF_UP) {
1056                         if ((ifp->if_flags & IFF_RUNNING)) {
1057                                 if ((ifp->if_flags ^ sc->if_flags) &
1058                                     (IFF_PROMISC | IFF_ALLMULTI)) {
1059                                         emx_disable_promisc(sc);
1060                                         emx_set_promisc(sc);
1061                                 }
1062                         } else {
1063                                 emx_init(sc);
1064                         }
1065                 } else if (ifp->if_flags & IFF_RUNNING) {
1066                         emx_stop(sc);
1067                 }
1068                 sc->if_flags = ifp->if_flags;
1069                 break;
1070
1071         case SIOCADDMULTI:
1072         case SIOCDELMULTI:
1073                 if (ifp->if_flags & IFF_RUNNING) {
1074                         emx_disable_intr(sc);
1075                         emx_set_multi(sc);
1076 #ifdef IFPOLL_ENABLE
1077                         if (!(ifp->if_flags & IFF_NPOLLING))
1078 #endif
1079                                 emx_enable_intr(sc);
1080                 }
1081                 break;
1082
1083         case SIOCSIFMEDIA:
1084                 /* Check SOL/IDER usage */
1085                 if (e1000_check_reset_block(&sc->hw)) {
1086                         device_printf(sc->dev, "Media change is"
1087                             " blocked due to SOL/IDER session.\n");
1088                         break;
1089                 }
1090                 /* FALL THROUGH */
1091
1092         case SIOCGIFMEDIA:
1093                 error = ifmedia_ioctl(ifp, ifr, &sc->media, command);
1094                 break;
1095
1096         case SIOCSIFCAP:
1097                 reinit = 0;
1098                 mask = ifr->ifr_reqcap ^ ifp->if_capenable;
1099                 if (mask & IFCAP_RXCSUM) {
1100                         ifp->if_capenable ^= IFCAP_RXCSUM;
1101                         reinit = 1;
1102                 }
1103                 if (mask & IFCAP_VLAN_HWTAGGING) {
1104                         ifp->if_capenable ^= IFCAP_VLAN_HWTAGGING;
1105                         reinit = 1;
1106                 }
1107                 if (mask & IFCAP_TXCSUM) {
1108                         ifp->if_capenable ^= IFCAP_TXCSUM;
1109                         if (ifp->if_capenable & IFCAP_TXCSUM)
1110                                 ifp->if_hwassist |= EMX_CSUM_FEATURES;
1111                         else
1112                                 ifp->if_hwassist &= ~EMX_CSUM_FEATURES;
1113                 }
1114                 if (mask & IFCAP_TSO) {
1115                         ifp->if_capenable ^= IFCAP_TSO;
1116                         if (ifp->if_capenable & IFCAP_TSO)
1117                                 ifp->if_hwassist |= CSUM_TSO;
1118                         else
1119                                 ifp->if_hwassist &= ~CSUM_TSO;
1120                 }
1121                 if (mask & IFCAP_RSS)
1122                         ifp->if_capenable ^= IFCAP_RSS;
1123                 if (reinit && (ifp->if_flags & IFF_RUNNING))
1124                         emx_init(sc);
1125                 break;
1126
1127         default:
1128                 error = ether_ioctl(ifp, command, data);
1129                 break;
1130         }
1131         return (error);
1132 }
1133
1134 static void
1135 emx_watchdog(struct ifaltq_subque *ifsq)
1136 {
1137         struct emx_txdata *tdata = ifsq_get_priv(ifsq);
1138         struct ifnet *ifp = ifsq_get_ifp(ifsq);
1139         struct emx_softc *sc = ifp->if_softc;
1140         int i;
1141
1142         ASSERT_IFNET_SERIALIZED_ALL(ifp);
1143
1144         /*
1145          * The timer is set to 5 every time start queues a packet.
1146          * Then txeof keeps resetting it as long as it cleans at
1147          * least one descriptor.
1148          * Finally, anytime all descriptors are clean the timer is
1149          * set to 0.
1150          */
1151
1152         if (E1000_READ_REG(&sc->hw, E1000_TDT(tdata->idx)) ==
1153             E1000_READ_REG(&sc->hw, E1000_TDH(tdata->idx))) {
1154                 /*
1155                  * If we reach here, all TX jobs are completed and
1156                  * the TX engine should have been idled for some time.
1157                  * We don't need to call ifsq_devstart_sched() here.
1158                  */
1159                 ifsq_clr_oactive(ifsq);
1160                 tdata->tx_watchdog.wd_timer = 0;
1161                 return;
1162         }
1163
1164         /*
1165          * If we are in this routine because of pause frames, then
1166          * don't reset the hardware.
1167          */
1168         if (E1000_READ_REG(&sc->hw, E1000_STATUS) & E1000_STATUS_TXOFF) {
1169                 tdata->tx_watchdog.wd_timer = EMX_TX_TIMEOUT;
1170                 return;
1171         }
1172
1173         if_printf(ifp, "TX %d watchdog timeout -- resetting\n", tdata->idx);
1174
1175         ifp->if_oerrors++;
1176
1177         emx_init(sc);
1178         for (i = 0; i < sc->tx_ring_inuse; ++i)
1179                 ifsq_devstart_sched(sc->tx_data[i].ifsq);
1180 }
1181
1182 static void
1183 emx_init(void *xsc)
1184 {
1185         struct emx_softc *sc = xsc;
1186         struct ifnet *ifp = &sc->arpcom.ac_if;
1187         device_t dev = sc->dev;
1188         boolean_t polling;
1189         int i;
1190
1191         ASSERT_IFNET_SERIALIZED_ALL(ifp);
1192
1193         emx_stop(sc);
1194
1195         /* Get the latest mac address, User can use a LAA */
1196         bcopy(IF_LLADDR(ifp), sc->hw.mac.addr, ETHER_ADDR_LEN);
1197
1198         /* Put the address into the Receive Address Array */
1199         e1000_rar_set(&sc->hw, sc->hw.mac.addr, 0);
1200
1201         /*
1202          * With the 82571 sc, RAR[0] may be overwritten
1203          * when the other port is reset, we make a duplicate
1204          * in RAR[14] for that eventuality, this assures
1205          * the interface continues to function.
1206          */
1207         if (sc->hw.mac.type == e1000_82571) {
1208                 e1000_set_laa_state_82571(&sc->hw, TRUE);
1209                 e1000_rar_set(&sc->hw, sc->hw.mac.addr,
1210                     E1000_RAR_ENTRIES - 1);
1211         }
1212
1213         /* Initialize the hardware */
1214         if (emx_reset(sc)) {
1215                 device_printf(dev, "Unable to reset the hardware\n");
1216                 /* XXX emx_stop()? */
1217                 return;
1218         }
1219         emx_update_link_status(sc);
1220
1221         /* Setup VLAN support, basic and offload if available */
1222         E1000_WRITE_REG(&sc->hw, E1000_VET, ETHERTYPE_VLAN);
1223
1224         if (ifp->if_capenable & IFCAP_VLAN_HWTAGGING) {
1225                 uint32_t ctrl;
1226
1227                 ctrl = E1000_READ_REG(&sc->hw, E1000_CTRL);
1228                 ctrl |= E1000_CTRL_VME;
1229                 E1000_WRITE_REG(&sc->hw, E1000_CTRL, ctrl);
1230         }
1231
1232         /* Configure for OS presence */
1233         emx_get_mgmt(sc);
1234
1235         polling = FALSE;
1236 #ifdef IFPOLL_ENABLE
1237         if (ifp->if_flags & IFF_NPOLLING)
1238                 polling = TRUE;
1239 #endif
1240         sc->tx_ring_inuse = emx_get_txring_inuse(sc, polling);
1241         ifq_set_subq_mask(&ifp->if_snd, sc->tx_ring_inuse - 1);
1242
1243         /* Prepare transmit descriptors and buffers */
1244         for (i = 0; i < sc->tx_ring_inuse; ++i)
1245                 emx_init_tx_ring(&sc->tx_data[i]);
1246         emx_init_tx_unit(sc);
1247
1248         /* Setup Multicast table */
1249         emx_set_multi(sc);
1250
1251         /* Prepare receive descriptors and buffers */
1252         for (i = 0; i < sc->rx_ring_cnt; ++i) {
1253                 if (emx_init_rx_ring(&sc->rx_data[i])) {
1254                         device_printf(dev,
1255                             "Could not setup receive structures\n");
1256                         emx_stop(sc);
1257                         return;
1258                 }
1259         }
1260         emx_init_rx_unit(sc);
1261
1262         /* Don't lose promiscuous settings */
1263         emx_set_promisc(sc);
1264
1265         ifp->if_flags |= IFF_RUNNING;
1266         for (i = 0; i < sc->tx_ring_inuse; ++i) {
1267                 ifsq_clr_oactive(sc->tx_data[i].ifsq);
1268                 ifsq_watchdog_start(&sc->tx_data[i].tx_watchdog);
1269         }
1270
1271         callout_reset(&sc->timer, hz, emx_timer, sc);
1272         e1000_clear_hw_cntrs_base_generic(&sc->hw);
1273
1274         /* MSI/X configuration for 82574 */
1275         if (sc->hw.mac.type == e1000_82574) {
1276                 int tmp;
1277
1278                 tmp = E1000_READ_REG(&sc->hw, E1000_CTRL_EXT);
1279                 tmp |= E1000_CTRL_EXT_PBA_CLR;
1280                 E1000_WRITE_REG(&sc->hw, E1000_CTRL_EXT, tmp);
1281                 /*
1282                  * XXX MSIX
1283                  * Set the IVAR - interrupt vector routing.
1284                  * Each nibble represents a vector, high bit
1285                  * is enable, other 3 bits are the MSIX table
1286                  * entry, we map RXQ0 to 0, TXQ0 to 1, and
1287                  * Link (other) to 2, hence the magic number.
1288                  */
1289                 E1000_WRITE_REG(&sc->hw, E1000_IVAR, 0x800A0908);
1290         }
1291
1292         /*
1293          * Only enable interrupts if we are not polling, make sure
1294          * they are off otherwise.
1295          */
1296         if (polling)
1297                 emx_disable_intr(sc);
1298         else
1299                 emx_enable_intr(sc);
1300
1301         /* AMT based hardware can now take control from firmware */
1302         if ((sc->flags & (EMX_FLAG_HAS_MGMT | EMX_FLAG_HAS_AMT)) ==
1303             (EMX_FLAG_HAS_MGMT | EMX_FLAG_HAS_AMT))
1304                 emx_get_hw_control(sc);
1305 }
1306
1307 static void
1308 emx_intr(void *xsc)
1309 {
1310         emx_intr_body(xsc, TRUE);
1311 }
1312
1313 static void
1314 emx_intr_body(struct emx_softc *sc, boolean_t chk_asserted)
1315 {
1316         struct ifnet *ifp = &sc->arpcom.ac_if;
1317         uint32_t reg_icr;
1318
1319         logif(intr_beg);
1320         ASSERT_SERIALIZED(&sc->main_serialize);
1321
1322         reg_icr = E1000_READ_REG(&sc->hw, E1000_ICR);
1323
1324         if (chk_asserted && (reg_icr & E1000_ICR_INT_ASSERTED) == 0) {
1325                 logif(intr_end);
1326                 return;
1327         }
1328
1329         /*
1330          * XXX: some laptops trigger several spurious interrupts
1331          * on emx(4) when in the resume cycle. The ICR register
1332          * reports all-ones value in this case. Processing such
1333          * interrupts would lead to a freeze. I don't know why.
1334          */
1335         if (reg_icr == 0xffffffff) {
1336                 logif(intr_end);
1337                 return;
1338         }
1339
1340         if (ifp->if_flags & IFF_RUNNING) {
1341                 if (reg_icr &
1342                     (E1000_ICR_RXT0 | E1000_ICR_RXDMT0 | E1000_ICR_RXO)) {
1343                         int i;
1344
1345                         for (i = 0; i < sc->rx_ring_cnt; ++i) {
1346                                 lwkt_serialize_enter(
1347                                 &sc->rx_data[i].rx_serialize);
1348                                 emx_rxeof(&sc->rx_data[i], -1);
1349                                 lwkt_serialize_exit(
1350                                 &sc->rx_data[i].rx_serialize);
1351                         }
1352                 }
1353                 if (reg_icr & E1000_ICR_TXDW) {
1354                         struct emx_txdata *tdata = &sc->tx_data[0];
1355
1356                         lwkt_serialize_enter(&tdata->tx_serialize);
1357                         emx_txeof(tdata);
1358                         if (!ifsq_is_empty(tdata->ifsq))
1359                                 ifsq_devstart(tdata->ifsq);
1360                         lwkt_serialize_exit(&tdata->tx_serialize);
1361                 }
1362         }
1363
1364         /* Link status change */
1365         if (reg_icr & (E1000_ICR_RXSEQ | E1000_ICR_LSC)) {
1366                 emx_serialize_skipmain(sc);
1367
1368                 callout_stop(&sc->timer);
1369                 sc->hw.mac.get_link_status = 1;
1370                 emx_update_link_status(sc);
1371
1372                 /* Deal with TX cruft when link lost */
1373                 emx_tx_purge(sc);
1374
1375                 callout_reset(&sc->timer, hz, emx_timer, sc);
1376
1377                 emx_deserialize_skipmain(sc);
1378         }
1379
1380         if (reg_icr & E1000_ICR_RXO)
1381                 sc->rx_overruns++;
1382
1383         logif(intr_end);
1384 }
1385
1386 static void
1387 emx_intr_mask(void *xsc)
1388 {
1389         struct emx_softc *sc = xsc;
1390
1391         E1000_WRITE_REG(&sc->hw, E1000_IMC, 0xffffffff);
1392         /*
1393          * NOTE:
1394          * ICR.INT_ASSERTED bit will never be set if IMS is 0,
1395          * so don't check it.
1396          */
1397         emx_intr_body(sc, FALSE);
1398         E1000_WRITE_REG(&sc->hw, E1000_IMS, IMS_ENABLE_MASK);
1399 }
1400
1401 static void
1402 emx_media_status(struct ifnet *ifp, struct ifmediareq *ifmr)
1403 {
1404         struct emx_softc *sc = ifp->if_softc;
1405
1406         ASSERT_IFNET_SERIALIZED_ALL(ifp);
1407
1408         emx_update_link_status(sc);
1409
1410         ifmr->ifm_status = IFM_AVALID;
1411         ifmr->ifm_active = IFM_ETHER;
1412
1413         if (!sc->link_active)
1414                 return;
1415
1416         ifmr->ifm_status |= IFM_ACTIVE;
1417
1418         if (sc->hw.phy.media_type == e1000_media_type_fiber ||
1419             sc->hw.phy.media_type == e1000_media_type_internal_serdes) {
1420                 ifmr->ifm_active |= IFM_1000_SX | IFM_FDX;
1421         } else {
1422                 switch (sc->link_speed) {
1423                 case 10:
1424                         ifmr->ifm_active |= IFM_10_T;
1425                         break;
1426                 case 100:
1427                         ifmr->ifm_active |= IFM_100_TX;
1428                         break;
1429
1430                 case 1000:
1431                         ifmr->ifm_active |= IFM_1000_T;
1432                         break;
1433                 }
1434                 if (sc->link_duplex == FULL_DUPLEX)
1435                         ifmr->ifm_active |= IFM_FDX;
1436                 else
1437                         ifmr->ifm_active |= IFM_HDX;
1438         }
1439 }
1440
1441 static int
1442 emx_media_change(struct ifnet *ifp)
1443 {
1444         struct emx_softc *sc = ifp->if_softc;
1445         struct ifmedia *ifm = &sc->media;
1446
1447         ASSERT_IFNET_SERIALIZED_ALL(ifp);
1448
1449         if (IFM_TYPE(ifm->ifm_media) != IFM_ETHER)
1450                 return (EINVAL);
1451
1452         switch (IFM_SUBTYPE(ifm->ifm_media)) {
1453         case IFM_AUTO:
1454                 sc->hw.mac.autoneg = EMX_DO_AUTO_NEG;
1455                 sc->hw.phy.autoneg_advertised = EMX_AUTONEG_ADV_DEFAULT;
1456                 break;
1457
1458         case IFM_1000_LX:
1459         case IFM_1000_SX:
1460         case IFM_1000_T:
1461                 sc->hw.mac.autoneg = EMX_DO_AUTO_NEG;
1462                 sc->hw.phy.autoneg_advertised = ADVERTISE_1000_FULL;
1463                 break;
1464
1465         case IFM_100_TX:
1466                 sc->hw.mac.autoneg = FALSE;
1467                 sc->hw.phy.autoneg_advertised = 0;
1468                 if ((ifm->ifm_media & IFM_GMASK) == IFM_FDX)
1469                         sc->hw.mac.forced_speed_duplex = ADVERTISE_100_FULL;
1470                 else
1471                         sc->hw.mac.forced_speed_duplex = ADVERTISE_100_HALF;
1472                 break;
1473
1474         case IFM_10_T:
1475                 sc->hw.mac.autoneg = FALSE;
1476                 sc->hw.phy.autoneg_advertised = 0;
1477                 if ((ifm->ifm_media & IFM_GMASK) == IFM_FDX)
1478                         sc->hw.mac.forced_speed_duplex = ADVERTISE_10_FULL;
1479                 else
1480                         sc->hw.mac.forced_speed_duplex = ADVERTISE_10_HALF;
1481                 break;
1482
1483         default:
1484                 if_printf(ifp, "Unsupported media type\n");
1485                 break;
1486         }
1487
1488         emx_init(sc);
1489
1490         return (0);
1491 }
1492
1493 static int
1494 emx_encap(struct emx_txdata *tdata, struct mbuf **m_headp,
1495     int *segs_used, int *idx)
1496 {
1497         bus_dma_segment_t segs[EMX_MAX_SCATTER];
1498         bus_dmamap_t map;
1499         struct emx_txbuf *tx_buffer, *tx_buffer_mapped;
1500         struct e1000_tx_desc *ctxd = NULL;
1501         struct mbuf *m_head = *m_headp;
1502         uint32_t txd_upper, txd_lower, cmd = 0;
1503         int maxsegs, nsegs, i, j, first, last = 0, error;
1504
1505         if (m_head->m_pkthdr.csum_flags & CSUM_TSO) {
1506                 error = emx_tso_pullup(tdata, m_headp);
1507                 if (error)
1508                         return error;
1509                 m_head = *m_headp;
1510         }
1511
1512         txd_upper = txd_lower = 0;
1513
1514         /*
1515          * Capture the first descriptor index, this descriptor
1516          * will have the index of the EOP which is the only one
1517          * that now gets a DONE bit writeback.
1518          */
1519         first = tdata->next_avail_tx_desc;
1520         tx_buffer = &tdata->tx_buf[first];
1521         tx_buffer_mapped = tx_buffer;
1522         map = tx_buffer->map;
1523
1524         maxsegs = tdata->num_tx_desc_avail - EMX_TX_RESERVED;
1525         KASSERT(maxsegs >= tdata->spare_tx_desc, ("not enough spare TX desc"));
1526         if (maxsegs > EMX_MAX_SCATTER)
1527                 maxsegs = EMX_MAX_SCATTER;
1528
1529         error = bus_dmamap_load_mbuf_defrag(tdata->txtag, map, m_headp,
1530                         segs, maxsegs, &nsegs, BUS_DMA_NOWAIT);
1531         if (error) {
1532                 m_freem(*m_headp);
1533                 *m_headp = NULL;
1534                 return error;
1535         }
1536         bus_dmamap_sync(tdata->txtag, map, BUS_DMASYNC_PREWRITE);
1537
1538         m_head = *m_headp;
1539         tdata->tx_nsegs += nsegs;
1540         *segs_used += nsegs;
1541
1542         if (m_head->m_pkthdr.csum_flags & CSUM_TSO) {
1543                 /* TSO will consume one TX desc */
1544                 i = emx_tso_setup(tdata, m_head, &txd_upper, &txd_lower);
1545                 tdata->tx_nsegs += i;
1546                 *segs_used += i;
1547         } else if (m_head->m_pkthdr.csum_flags & EMX_CSUM_FEATURES) {
1548                 /* TX csum offloading will consume one TX desc */
1549                 i = emx_txcsum(tdata, m_head, &txd_upper, &txd_lower);
1550                 tdata->tx_nsegs += i;
1551                 *segs_used += i;
1552         }
1553         i = tdata->next_avail_tx_desc;
1554
1555         /* Set up our transmit descriptors */
1556         for (j = 0; j < nsegs; j++) {
1557                 tx_buffer = &tdata->tx_buf[i];
1558                 ctxd = &tdata->tx_desc_base[i];
1559
1560                 ctxd->buffer_addr = htole64(segs[j].ds_addr);
1561                 ctxd->lower.data = htole32(E1000_TXD_CMD_IFCS |
1562                                            txd_lower | segs[j].ds_len);
1563                 ctxd->upper.data = htole32(txd_upper);
1564
1565                 last = i;
1566                 if (++i == tdata->num_tx_desc)
1567                         i = 0;
1568         }
1569
1570         tdata->next_avail_tx_desc = i;
1571
1572         KKASSERT(tdata->num_tx_desc_avail > nsegs);
1573         tdata->num_tx_desc_avail -= nsegs;
1574
1575         /* Handle VLAN tag */
1576         if (m_head->m_flags & M_VLANTAG) {
1577                 /* Set the vlan id. */
1578                 ctxd->upper.fields.special =
1579                     htole16(m_head->m_pkthdr.ether_vlantag);
1580
1581                 /* Tell hardware to add tag */
1582                 ctxd->lower.data |= htole32(E1000_TXD_CMD_VLE);
1583         }
1584
1585         tx_buffer->m_head = m_head;
1586         tx_buffer_mapped->map = tx_buffer->map;
1587         tx_buffer->map = map;
1588
1589         if (tdata->tx_nsegs >= tdata->tx_intr_nsegs) {
1590                 tdata->tx_nsegs = 0;
1591
1592                 /*
1593                  * Report Status (RS) is turned on
1594                  * every tx_intr_nsegs descriptors.
1595                  */
1596                 cmd = E1000_TXD_CMD_RS;
1597
1598                 /*
1599                  * Keep track of the descriptor, which will
1600                  * be written back by hardware.
1601                  */
1602                 tdata->tx_dd[tdata->tx_dd_tail] = last;
1603                 EMX_INC_TXDD_IDX(tdata->tx_dd_tail);
1604                 KKASSERT(tdata->tx_dd_tail != tdata->tx_dd_head);
1605         }
1606
1607         /*
1608          * Last Descriptor of Packet needs End Of Packet (EOP)
1609          */
1610         ctxd->lower.data |= htole32(E1000_TXD_CMD_EOP | cmd);
1611
1612         /*
1613          * Defer TDT updating, until enough descriptors are setup
1614          */
1615         *idx = i;
1616
1617 #ifdef EMX_TSS_DEBUG
1618         tdata->tx_pkts++;
1619 #endif
1620
1621         return (0);
1622 }
1623
1624 static void
1625 emx_set_promisc(struct emx_softc *sc)
1626 {
1627         struct ifnet *ifp = &sc->arpcom.ac_if;
1628         uint32_t reg_rctl;
1629
1630         reg_rctl = E1000_READ_REG(&sc->hw, E1000_RCTL);
1631
1632         if (ifp->if_flags & IFF_PROMISC) {
1633                 reg_rctl |= (E1000_RCTL_UPE | E1000_RCTL_MPE);
1634                 /* Turn this on if you want to see bad packets */
1635                 if (emx_debug_sbp)
1636                         reg_rctl |= E1000_RCTL_SBP;
1637                 E1000_WRITE_REG(&sc->hw, E1000_RCTL, reg_rctl);
1638         } else if (ifp->if_flags & IFF_ALLMULTI) {
1639                 reg_rctl |= E1000_RCTL_MPE;
1640                 reg_rctl &= ~E1000_RCTL_UPE;
1641                 E1000_WRITE_REG(&sc->hw, E1000_RCTL, reg_rctl);
1642         }
1643 }
1644
1645 static void
1646 emx_disable_promisc(struct emx_softc *sc)
1647 {
1648         uint32_t reg_rctl;
1649
1650         reg_rctl = E1000_READ_REG(&sc->hw, E1000_RCTL);
1651
1652         reg_rctl &= ~E1000_RCTL_UPE;
1653         reg_rctl &= ~E1000_RCTL_MPE;
1654         reg_rctl &= ~E1000_RCTL_SBP;
1655         E1000_WRITE_REG(&sc->hw, E1000_RCTL, reg_rctl);
1656 }
1657
1658 static void
1659 emx_set_multi(struct emx_softc *sc)
1660 {
1661         struct ifnet *ifp = &sc->arpcom.ac_if;
1662         struct ifmultiaddr *ifma;
1663         uint32_t reg_rctl = 0;
1664         uint8_t *mta;
1665         int mcnt = 0;
1666
1667         mta = sc->mta;
1668         bzero(mta, ETH_ADDR_LEN * EMX_MCAST_ADDR_MAX);
1669
1670         TAILQ_FOREACH(ifma, &ifp->if_multiaddrs, ifma_link) {
1671                 if (ifma->ifma_addr->sa_family != AF_LINK)
1672                         continue;
1673
1674                 if (mcnt == EMX_MCAST_ADDR_MAX)
1675                         break;
1676
1677                 bcopy(LLADDR((struct sockaddr_dl *)ifma->ifma_addr),
1678                       &mta[mcnt * ETHER_ADDR_LEN], ETHER_ADDR_LEN);
1679                 mcnt++;
1680         }
1681
1682         if (mcnt >= EMX_MCAST_ADDR_MAX) {
1683                 reg_rctl = E1000_READ_REG(&sc->hw, E1000_RCTL);
1684                 reg_rctl |= E1000_RCTL_MPE;
1685                 E1000_WRITE_REG(&sc->hw, E1000_RCTL, reg_rctl);
1686         } else {
1687                 e1000_update_mc_addr_list(&sc->hw, mta, mcnt);
1688         }
1689 }
1690
1691 /*
1692  * This routine checks for link status and updates statistics.
1693  */
1694 static void
1695 emx_timer(void *xsc)
1696 {
1697         struct emx_softc *sc = xsc;
1698         struct ifnet *ifp = &sc->arpcom.ac_if;
1699
1700         lwkt_serialize_enter(&sc->main_serialize);
1701
1702         emx_update_link_status(sc);
1703         emx_update_stats(sc);
1704
1705         /* Reset LAA into RAR[0] on 82571 */
1706         if (e1000_get_laa_state_82571(&sc->hw) == TRUE)
1707                 e1000_rar_set(&sc->hw, sc->hw.mac.addr, 0);
1708
1709         if (emx_display_debug_stats && (ifp->if_flags & IFF_RUNNING))
1710                 emx_print_hw_stats(sc);
1711
1712         emx_smartspeed(sc);
1713
1714         callout_reset(&sc->timer, hz, emx_timer, sc);
1715
1716         lwkt_serialize_exit(&sc->main_serialize);
1717 }
1718
1719 static void
1720 emx_update_link_status(struct emx_softc *sc)
1721 {
1722         struct e1000_hw *hw = &sc->hw;
1723         struct ifnet *ifp = &sc->arpcom.ac_if;
1724         device_t dev = sc->dev;
1725         uint32_t link_check = 0;
1726
1727         /* Get the cached link value or read phy for real */
1728         switch (hw->phy.media_type) {
1729         case e1000_media_type_copper:
1730                 if (hw->mac.get_link_status) {
1731                         /* Do the work to read phy */
1732                         e1000_check_for_link(hw);
1733                         link_check = !hw->mac.get_link_status;
1734                         if (link_check) /* ESB2 fix */
1735                                 e1000_cfg_on_link_up(hw);
1736                 } else {
1737                         link_check = TRUE;
1738                 }
1739                 break;
1740
1741         case e1000_media_type_fiber:
1742                 e1000_check_for_link(hw);
1743                 link_check = E1000_READ_REG(hw, E1000_STATUS) & E1000_STATUS_LU;
1744                 break;
1745
1746         case e1000_media_type_internal_serdes:
1747                 e1000_check_for_link(hw);
1748                 link_check = sc->hw.mac.serdes_has_link;
1749                 break;
1750
1751         case e1000_media_type_unknown:
1752         default:
1753                 break;
1754         }
1755
1756         /* Now check for a transition */
1757         if (link_check && sc->link_active == 0) {
1758                 e1000_get_speed_and_duplex(hw, &sc->link_speed,
1759                     &sc->link_duplex);
1760
1761                 /*
1762                  * Check if we should enable/disable SPEED_MODE bit on
1763                  * 82571EB/82572EI
1764                  */
1765                 if (sc->link_speed != SPEED_1000 &&
1766                     (hw->mac.type == e1000_82571 ||
1767                      hw->mac.type == e1000_82572)) {
1768                         int tarc0;
1769
1770                         tarc0 = E1000_READ_REG(hw, E1000_TARC(0));
1771                         tarc0 &= ~EMX_TARC_SPEED_MODE;
1772                         E1000_WRITE_REG(hw, E1000_TARC(0), tarc0);
1773                 }
1774                 if (bootverbose) {
1775                         device_printf(dev, "Link is up %d Mbps %s\n",
1776                             sc->link_speed,
1777                             ((sc->link_duplex == FULL_DUPLEX) ?
1778                             "Full Duplex" : "Half Duplex"));
1779                 }
1780                 sc->link_active = 1;
1781                 sc->smartspeed = 0;
1782                 ifp->if_baudrate = sc->link_speed * 1000000;
1783                 ifp->if_link_state = LINK_STATE_UP;
1784                 if_link_state_change(ifp);
1785         } else if (!link_check && sc->link_active == 1) {
1786                 ifp->if_baudrate = sc->link_speed = 0;
1787                 sc->link_duplex = 0;
1788                 if (bootverbose)
1789                         device_printf(dev, "Link is Down\n");
1790                 sc->link_active = 0;
1791                 ifp->if_link_state = LINK_STATE_DOWN;
1792                 if_link_state_change(ifp);
1793         }
1794 }
1795
1796 static void
1797 emx_stop(struct emx_softc *sc)
1798 {
1799         struct ifnet *ifp = &sc->arpcom.ac_if;
1800         int i;
1801
1802         ASSERT_IFNET_SERIALIZED_ALL(ifp);
1803
1804         emx_disable_intr(sc);
1805
1806         callout_stop(&sc->timer);
1807
1808         ifp->if_flags &= ~IFF_RUNNING;
1809         for (i = 0; i < sc->tx_ring_cnt; ++i) {
1810                 struct emx_txdata *tdata = &sc->tx_data[i];
1811
1812                 ifsq_clr_oactive(tdata->ifsq);
1813                 ifsq_watchdog_stop(&tdata->tx_watchdog);
1814                 tdata->tx_flags &= ~EMX_TXFLAG_ENABLED;
1815         }
1816
1817         /*
1818          * Disable multiple receive queues.
1819          *
1820          * NOTE:
1821          * We should disable multiple receive queues before
1822          * resetting the hardware.
1823          */
1824         E1000_WRITE_REG(&sc->hw, E1000_MRQC, 0);
1825
1826         e1000_reset_hw(&sc->hw);
1827         E1000_WRITE_REG(&sc->hw, E1000_WUC, 0);
1828
1829         for (i = 0; i < sc->tx_ring_cnt; ++i)
1830                 emx_free_tx_ring(&sc->tx_data[i]);
1831         for (i = 0; i < sc->rx_ring_cnt; ++i)
1832                 emx_free_rx_ring(&sc->rx_data[i]);
1833 }
1834
1835 static int
1836 emx_reset(struct emx_softc *sc)
1837 {
1838         device_t dev = sc->dev;
1839         uint16_t rx_buffer_size;
1840         uint32_t pba;
1841
1842         /* Set up smart power down as default off on newer adapters. */
1843         if (!emx_smart_pwr_down &&
1844             (sc->hw.mac.type == e1000_82571 ||
1845              sc->hw.mac.type == e1000_82572)) {
1846                 uint16_t phy_tmp = 0;
1847
1848                 /* Speed up time to link by disabling smart power down. */
1849                 e1000_read_phy_reg(&sc->hw,
1850                     IGP02E1000_PHY_POWER_MGMT, &phy_tmp);
1851                 phy_tmp &= ~IGP02E1000_PM_SPD;
1852                 e1000_write_phy_reg(&sc->hw,
1853                     IGP02E1000_PHY_POWER_MGMT, phy_tmp);
1854         }
1855
1856         /*
1857          * Packet Buffer Allocation (PBA)
1858          * Writing PBA sets the receive portion of the buffer
1859          * the remainder is used for the transmit buffer.
1860          */
1861         switch (sc->hw.mac.type) {
1862         /* Total Packet Buffer on these is 48K */
1863         case e1000_82571:
1864         case e1000_82572:
1865         case e1000_80003es2lan:
1866                 pba = E1000_PBA_32K; /* 32K for Rx, 16K for Tx */
1867                 break;
1868
1869         case e1000_82573: /* 82573: Total Packet Buffer is 32K */
1870                 pba = E1000_PBA_12K; /* 12K for Rx, 20K for Tx */
1871                 break;
1872
1873         case e1000_82574:
1874                 pba = E1000_PBA_20K; /* 20K for Rx, 20K for Tx */
1875                 break;
1876
1877         default:
1878                 /* Devices before 82547 had a Packet Buffer of 64K.   */
1879                 if (sc->max_frame_size > 8192)
1880                         pba = E1000_PBA_40K; /* 40K for Rx, 24K for Tx */
1881                 else
1882                         pba = E1000_PBA_48K; /* 48K for Rx, 16K for Tx */
1883         }
1884         E1000_WRITE_REG(&sc->hw, E1000_PBA, pba);
1885
1886         /*
1887          * These parameters control the automatic generation (Tx) and
1888          * response (Rx) to Ethernet PAUSE frames.
1889          * - High water mark should allow for at least two frames to be
1890          *   received after sending an XOFF.
1891          * - Low water mark works best when it is very near the high water mark.
1892          *   This allows the receiver to restart by sending XON when it has
1893          *   drained a bit. Here we use an arbitary value of 1500 which will
1894          *   restart after one full frame is pulled from the buffer. There
1895          *   could be several smaller frames in the buffer and if so they will
1896          *   not trigger the XON until their total number reduces the buffer
1897          *   by 1500.
1898          * - The pause time is fairly large at 1000 x 512ns = 512 usec.
1899          */
1900         rx_buffer_size = (E1000_READ_REG(&sc->hw, E1000_PBA) & 0xffff) << 10;
1901
1902         sc->hw.fc.high_water = rx_buffer_size -
1903                                roundup2(sc->max_frame_size, 1024);
1904         sc->hw.fc.low_water = sc->hw.fc.high_water - 1500;
1905
1906         if (sc->hw.mac.type == e1000_80003es2lan)
1907                 sc->hw.fc.pause_time = 0xFFFF;
1908         else
1909                 sc->hw.fc.pause_time = EMX_FC_PAUSE_TIME;
1910         sc->hw.fc.send_xon = TRUE;
1911         sc->hw.fc.requested_mode = e1000_fc_full;
1912
1913         /* Issue a global reset */
1914         e1000_reset_hw(&sc->hw);
1915         E1000_WRITE_REG(&sc->hw, E1000_WUC, 0);
1916         emx_disable_aspm(sc);
1917
1918         if (e1000_init_hw(&sc->hw) < 0) {
1919                 device_printf(dev, "Hardware Initialization Failed\n");
1920                 return (EIO);
1921         }
1922
1923         E1000_WRITE_REG(&sc->hw, E1000_VET, ETHERTYPE_VLAN);
1924         e1000_get_phy_info(&sc->hw);
1925         e1000_check_for_link(&sc->hw);
1926
1927         return (0);
1928 }
1929
1930 static void
1931 emx_setup_ifp(struct emx_softc *sc)
1932 {
1933         struct ifnet *ifp = &sc->arpcom.ac_if;
1934
1935         if_initname(ifp, device_get_name(sc->dev),
1936                     device_get_unit(sc->dev));
1937         ifp->if_softc = sc;
1938         ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST;
1939         ifp->if_init =  emx_init;
1940         ifp->if_ioctl = emx_ioctl;
1941         ifp->if_start = emx_start;
1942 #ifdef IFPOLL_ENABLE
1943         ifp->if_npoll = emx_npoll;
1944 #endif
1945         ifp->if_serialize = emx_serialize;
1946         ifp->if_deserialize = emx_deserialize;
1947         ifp->if_tryserialize = emx_tryserialize;
1948 #ifdef INVARIANTS
1949         ifp->if_serialize_assert = emx_serialize_assert;
1950 #endif
1951
1952         ifq_set_maxlen(&ifp->if_snd, sc->tx_data[0].num_tx_desc - 1);
1953         ifq_set_ready(&ifp->if_snd);
1954         ifq_set_subq_cnt(&ifp->if_snd, sc->tx_ring_cnt);
1955
1956         ifp->if_mapsubq = ifq_mapsubq_mask;
1957         ifq_set_subq_mask(&ifp->if_snd, 0);
1958
1959         ether_ifattach(ifp, sc->hw.mac.addr, NULL);
1960
1961         ifp->if_capabilities = IFCAP_HWCSUM |
1962                                IFCAP_VLAN_HWTAGGING |
1963                                IFCAP_VLAN_MTU |
1964                                IFCAP_TSO;
1965         if (sc->rx_ring_cnt > 1)
1966                 ifp->if_capabilities |= IFCAP_RSS;
1967         ifp->if_capenable = ifp->if_capabilities;
1968         ifp->if_hwassist = EMX_CSUM_FEATURES | CSUM_TSO;
1969
1970         /*
1971          * Tell the upper layer(s) we support long frames.
1972          */
1973         ifp->if_data.ifi_hdrlen = sizeof(struct ether_vlan_header);
1974
1975         /*
1976          * Specify the media types supported by this sc and register
1977          * callbacks to update media and link information
1978          */
1979         ifmedia_init(&sc->media, IFM_IMASK,
1980                      emx_media_change, emx_media_status);
1981         if (sc->hw.phy.media_type == e1000_media_type_fiber ||
1982             sc->hw.phy.media_type == e1000_media_type_internal_serdes) {
1983                 ifmedia_add(&sc->media, IFM_ETHER | IFM_1000_SX | IFM_FDX,
1984                             0, NULL);
1985                 ifmedia_add(&sc->media, IFM_ETHER | IFM_1000_SX, 0, NULL);
1986         } else {
1987                 ifmedia_add(&sc->media, IFM_ETHER | IFM_10_T, 0, NULL);
1988                 ifmedia_add(&sc->media, IFM_ETHER | IFM_10_T | IFM_FDX,
1989                             0, NULL);
1990                 ifmedia_add(&sc->media, IFM_ETHER | IFM_100_TX, 0, NULL);
1991                 ifmedia_add(&sc->media, IFM_ETHER | IFM_100_TX | IFM_FDX,
1992                             0, NULL);
1993                 if (sc->hw.phy.type != e1000_phy_ife) {
1994                         ifmedia_add(&sc->media,
1995                                 IFM_ETHER | IFM_1000_T | IFM_FDX, 0, NULL);
1996                         ifmedia_add(&sc->media,
1997                                 IFM_ETHER | IFM_1000_T, 0, NULL);
1998                 }
1999         }
2000         ifmedia_add(&sc->media, IFM_ETHER | IFM_AUTO, 0, NULL);
2001         ifmedia_set(&sc->media, IFM_ETHER | IFM_AUTO);
2002 }
2003
2004 /*
2005  * Workaround for SmartSpeed on 82541 and 82547 controllers
2006  */
2007 static void
2008 emx_smartspeed(struct emx_softc *sc)
2009 {
2010         uint16_t phy_tmp;
2011
2012         if (sc->link_active || sc->hw.phy.type != e1000_phy_igp ||
2013             sc->hw.mac.autoneg == 0 ||
2014             (sc->hw.phy.autoneg_advertised & ADVERTISE_1000_FULL) == 0)
2015                 return;
2016
2017         if (sc->smartspeed == 0) {
2018                 /*
2019                  * If Master/Slave config fault is asserted twice,
2020                  * we assume back-to-back
2021                  */
2022                 e1000_read_phy_reg(&sc->hw, PHY_1000T_STATUS, &phy_tmp);
2023                 if (!(phy_tmp & SR_1000T_MS_CONFIG_FAULT))
2024                         return;
2025                 e1000_read_phy_reg(&sc->hw, PHY_1000T_STATUS, &phy_tmp);
2026                 if (phy_tmp & SR_1000T_MS_CONFIG_FAULT) {
2027                         e1000_read_phy_reg(&sc->hw,
2028                             PHY_1000T_CTRL, &phy_tmp);
2029                         if (phy_tmp & CR_1000T_MS_ENABLE) {
2030                                 phy_tmp &= ~CR_1000T_MS_ENABLE;
2031                                 e1000_write_phy_reg(&sc->hw,
2032                                     PHY_1000T_CTRL, phy_tmp);
2033                                 sc->smartspeed++;
2034                                 if (sc->hw.mac.autoneg &&
2035                                     !e1000_phy_setup_autoneg(&sc->hw) &&
2036                                     !e1000_read_phy_reg(&sc->hw,
2037                                      PHY_CONTROL, &phy_tmp)) {
2038                                         phy_tmp |= MII_CR_AUTO_NEG_EN |
2039                                                    MII_CR_RESTART_AUTO_NEG;
2040                                         e1000_write_phy_reg(&sc->hw,
2041                                             PHY_CONTROL, phy_tmp);
2042                                 }
2043                         }
2044                 }
2045                 return;
2046         } else if (sc->smartspeed == EMX_SMARTSPEED_DOWNSHIFT) {
2047                 /* If still no link, perhaps using 2/3 pair cable */
2048                 e1000_read_phy_reg(&sc->hw, PHY_1000T_CTRL, &phy_tmp);
2049                 phy_tmp |= CR_1000T_MS_ENABLE;
2050                 e1000_write_phy_reg(&sc->hw, PHY_1000T_CTRL, phy_tmp);
2051                 if (sc->hw.mac.autoneg &&
2052                     !e1000_phy_setup_autoneg(&sc->hw) &&
2053                     !e1000_read_phy_reg(&sc->hw, PHY_CONTROL, &phy_tmp)) {
2054                         phy_tmp |= MII_CR_AUTO_NEG_EN | MII_CR_RESTART_AUTO_NEG;
2055                         e1000_write_phy_reg(&sc->hw, PHY_CONTROL, phy_tmp);
2056                 }
2057         }
2058
2059         /* Restart process after EMX_SMARTSPEED_MAX iterations */
2060         if (sc->smartspeed++ == EMX_SMARTSPEED_MAX)
2061                 sc->smartspeed = 0;
2062 }
2063
2064 static int
2065 emx_create_tx_ring(struct emx_txdata *tdata)
2066 {
2067         device_t dev = tdata->sc->dev;
2068         struct emx_txbuf *tx_buffer;
2069         int error, i, tsize, ntxd;
2070
2071         /*
2072          * Validate number of transmit descriptors.  It must not exceed
2073          * hardware maximum, and must be multiple of E1000_DBA_ALIGN.
2074          */
2075         ntxd = device_getenv_int(dev, "txd", emx_txd);
2076         if ((ntxd * sizeof(struct e1000_tx_desc)) % EMX_DBA_ALIGN != 0 ||
2077             ntxd > EMX_MAX_TXD || ntxd < EMX_MIN_TXD) {
2078                 device_printf(dev, "Using %d TX descriptors instead of %d!\n",
2079                     EMX_DEFAULT_TXD, ntxd);
2080                 tdata->num_tx_desc = EMX_DEFAULT_TXD;
2081         } else {
2082                 tdata->num_tx_desc = ntxd;
2083         }
2084
2085         /*
2086          * Allocate Transmit Descriptor ring
2087          */
2088         tsize = roundup2(tdata->num_tx_desc * sizeof(struct e1000_tx_desc),
2089                          EMX_DBA_ALIGN);
2090         tdata->tx_desc_base = bus_dmamem_coherent_any(tdata->sc->parent_dtag,
2091                                 EMX_DBA_ALIGN, tsize, BUS_DMA_WAITOK,
2092                                 &tdata->tx_desc_dtag, &tdata->tx_desc_dmap,
2093                                 &tdata->tx_desc_paddr);
2094         if (tdata->tx_desc_base == NULL) {
2095                 device_printf(dev, "Unable to allocate tx_desc memory\n");
2096                 return ENOMEM;
2097         }
2098
2099         tsize = __VM_CACHELINE_ALIGN(
2100             sizeof(struct emx_txbuf) * tdata->num_tx_desc);
2101         tdata->tx_buf = kmalloc_cachealign(tsize, M_DEVBUF, M_WAITOK | M_ZERO);
2102
2103         /*
2104          * Create DMA tags for tx buffers
2105          */
2106         error = bus_dma_tag_create(tdata->sc->parent_dtag, /* parent */
2107                         1, 0,                   /* alignment, bounds */
2108                         BUS_SPACE_MAXADDR,      /* lowaddr */
2109                         BUS_SPACE_MAXADDR,      /* highaddr */
2110                         NULL, NULL,             /* filter, filterarg */
2111                         EMX_TSO_SIZE,           /* maxsize */
2112                         EMX_MAX_SCATTER,        /* nsegments */
2113                         EMX_MAX_SEGSIZE,        /* maxsegsize */
2114                         BUS_DMA_WAITOK | BUS_DMA_ALLOCNOW |
2115                         BUS_DMA_ONEBPAGE,       /* flags */
2116                         &tdata->txtag);
2117         if (error) {
2118                 device_printf(dev, "Unable to allocate TX DMA tag\n");
2119                 kfree(tdata->tx_buf, M_DEVBUF);
2120                 tdata->tx_buf = NULL;
2121                 return error;
2122         }
2123
2124         /*
2125          * Create DMA maps for tx buffers
2126          */
2127         for (i = 0; i < tdata->num_tx_desc; i++) {
2128                 tx_buffer = &tdata->tx_buf[i];
2129
2130                 error = bus_dmamap_create(tdata->txtag,
2131                                           BUS_DMA_WAITOK | BUS_DMA_ONEBPAGE,
2132                                           &tx_buffer->map);
2133                 if (error) {
2134                         device_printf(dev, "Unable to create TX DMA map\n");
2135                         emx_destroy_tx_ring(tdata, i);
2136                         return error;
2137                 }
2138         }
2139
2140         /*
2141          * Setup TX parameters
2142          */
2143         tdata->spare_tx_desc = EMX_TX_SPARE;
2144         tdata->tx_wreg_nsegs = 8;
2145
2146         /*
2147          * Keep following relationship between spare_tx_desc, oact_tx_desc
2148          * and tx_intr_nsegs:
2149          * (spare_tx_desc + EMX_TX_RESERVED) <=
2150          * oact_tx_desc <= EMX_TX_OACTIVE_MAX <= tx_intr_nsegs
2151          */
2152         tdata->oact_tx_desc = tdata->num_tx_desc / 8;
2153         if (tdata->oact_tx_desc > EMX_TX_OACTIVE_MAX)
2154                 tdata->oact_tx_desc = EMX_TX_OACTIVE_MAX;
2155         if (tdata->oact_tx_desc < tdata->spare_tx_desc + EMX_TX_RESERVED)
2156                 tdata->oact_tx_desc = tdata->spare_tx_desc + EMX_TX_RESERVED;
2157
2158         tdata->tx_intr_nsegs = tdata->num_tx_desc / 16;
2159         if (tdata->tx_intr_nsegs < tdata->oact_tx_desc)
2160                 tdata->tx_intr_nsegs = tdata->oact_tx_desc;
2161
2162         /*
2163          * Pullup extra 4bytes into the first data segment, see:
2164          * 82571/82572 specification update errata #7
2165          *
2166          * NOTE:
2167          * 4bytes instead of 2bytes, which are mentioned in the errata,
2168          * are pulled; mainly to keep rest of the data properly aligned.
2169          */
2170         if (tdata->sc->hw.mac.type == e1000_82571 ||
2171             tdata->sc->hw.mac.type == e1000_82572)
2172                 tdata->tx_flags |= EMX_TXFLAG_TSO_PULLEX;
2173
2174         return (0);
2175 }
2176
2177 static void
2178 emx_init_tx_ring(struct emx_txdata *tdata)
2179 {
2180         /* Clear the old ring contents */
2181         bzero(tdata->tx_desc_base,
2182               sizeof(struct e1000_tx_desc) * tdata->num_tx_desc);
2183
2184         /* Reset state */
2185         tdata->next_avail_tx_desc = 0;
2186         tdata->next_tx_to_clean = 0;
2187         tdata->num_tx_desc_avail = tdata->num_tx_desc;
2188
2189         tdata->tx_flags |= EMX_TXFLAG_ENABLED;
2190         if (tdata->sc->tx_ring_inuse > 1) {
2191                 tdata->tx_flags |= EMX_TXFLAG_FORCECTX;
2192                 if (bootverbose) {
2193                         if_printf(&tdata->sc->arpcom.ac_if,
2194                             "TX %d force ctx setup\n", tdata->idx);
2195                 }
2196         }
2197 }
2198
2199 static void
2200 emx_init_tx_unit(struct emx_softc *sc)
2201 {
2202         uint32_t tctl, tarc, tipg = 0;
2203         int i;
2204
2205         for (i = 0; i < sc->tx_ring_inuse; ++i) {
2206                 struct emx_txdata *tdata = &sc->tx_data[i];
2207                 uint64_t bus_addr;
2208
2209                 /* Setup the Base and Length of the Tx Descriptor Ring */
2210                 bus_addr = tdata->tx_desc_paddr;
2211                 E1000_WRITE_REG(&sc->hw, E1000_TDLEN(i),
2212                     tdata->num_tx_desc * sizeof(struct e1000_tx_desc));
2213                 E1000_WRITE_REG(&sc->hw, E1000_TDBAH(i),
2214                     (uint32_t)(bus_addr >> 32));
2215                 E1000_WRITE_REG(&sc->hw, E1000_TDBAL(i),
2216                     (uint32_t)bus_addr);
2217                 /* Setup the HW Tx Head and Tail descriptor pointers */
2218                 E1000_WRITE_REG(&sc->hw, E1000_TDT(i), 0);
2219                 E1000_WRITE_REG(&sc->hw, E1000_TDH(i), 0);
2220         }
2221
2222         /* Set the default values for the Tx Inter Packet Gap timer */
2223         switch (sc->hw.mac.type) {
2224         case e1000_80003es2lan:
2225                 tipg = DEFAULT_82543_TIPG_IPGR1;
2226                 tipg |= DEFAULT_80003ES2LAN_TIPG_IPGR2 <<
2227                     E1000_TIPG_IPGR2_SHIFT;
2228                 break;
2229
2230         default:
2231                 if (sc->hw.phy.media_type == e1000_media_type_fiber ||
2232                     sc->hw.phy.media_type == e1000_media_type_internal_serdes)
2233                         tipg = DEFAULT_82543_TIPG_IPGT_FIBER;
2234                 else
2235                         tipg = DEFAULT_82543_TIPG_IPGT_COPPER;
2236                 tipg |= DEFAULT_82543_TIPG_IPGR1 << E1000_TIPG_IPGR1_SHIFT;
2237                 tipg |= DEFAULT_82543_TIPG_IPGR2 << E1000_TIPG_IPGR2_SHIFT;
2238                 break;
2239         }
2240
2241         E1000_WRITE_REG(&sc->hw, E1000_TIPG, tipg);
2242
2243         /* NOTE: 0 is not allowed for TIDV */
2244         E1000_WRITE_REG(&sc->hw, E1000_TIDV, 1);
2245         E1000_WRITE_REG(&sc->hw, E1000_TADV, 0);
2246
2247         if (sc->hw.mac.type == e1000_82571 ||
2248             sc->hw.mac.type == e1000_82572) {
2249                 tarc = E1000_READ_REG(&sc->hw, E1000_TARC(0));
2250                 tarc |= EMX_TARC_SPEED_MODE;
2251                 E1000_WRITE_REG(&sc->hw, E1000_TARC(0), tarc);
2252         } else if (sc->hw.mac.type == e1000_80003es2lan) {
2253                 tarc = E1000_READ_REG(&sc->hw, E1000_TARC(0));
2254                 tarc |= 1;
2255                 E1000_WRITE_REG(&sc->hw, E1000_TARC(0), tarc);
2256                 tarc = E1000_READ_REG(&sc->hw, E1000_TARC(1));
2257                 tarc |= 1;
2258                 E1000_WRITE_REG(&sc->hw, E1000_TARC(1), tarc);
2259         }
2260
2261         /* Program the Transmit Control Register */
2262         tctl = E1000_READ_REG(&sc->hw, E1000_TCTL);
2263         tctl &= ~E1000_TCTL_CT;
2264         tctl |= E1000_TCTL_PSP | E1000_TCTL_RTLC | E1000_TCTL_EN |
2265                 (E1000_COLLISION_THRESHOLD << E1000_CT_SHIFT);
2266         tctl |= E1000_TCTL_MULR;
2267
2268         /* This write will effectively turn on the transmit unit. */
2269         E1000_WRITE_REG(&sc->hw, E1000_TCTL, tctl);
2270
2271         if (sc->hw.mac.type == e1000_82571 ||
2272             sc->hw.mac.type == e1000_82572 ||
2273             sc->hw.mac.type == e1000_80003es2lan) {
2274                 /* Bit 28 of TARC1 must be cleared when MULR is enabled */
2275                 tarc = E1000_READ_REG(&sc->hw, E1000_TARC(1));
2276                 tarc &= ~(1 << 28);
2277                 E1000_WRITE_REG(&sc->hw, E1000_TARC(1), tarc);
2278         }
2279
2280         if (sc->tx_ring_inuse > 1) {
2281                 tarc = E1000_READ_REG(&sc->hw, E1000_TARC(0));
2282                 tarc &= ~EMX_TARC_COUNT_MASK;
2283                 tarc |= 1;
2284                 E1000_WRITE_REG(&sc->hw, E1000_TARC(0), tarc);
2285
2286                 tarc = E1000_READ_REG(&sc->hw, E1000_TARC(1));
2287                 tarc &= ~EMX_TARC_COUNT_MASK;
2288                 tarc |= 1;
2289                 E1000_WRITE_REG(&sc->hw, E1000_TARC(1), tarc);
2290         }
2291 }
2292
2293 static void
2294 emx_destroy_tx_ring(struct emx_txdata *tdata, int ndesc)
2295 {
2296         struct emx_txbuf *tx_buffer;
2297         int i;
2298
2299         /* Free Transmit Descriptor ring */
2300         if (tdata->tx_desc_base) {
2301                 bus_dmamap_unload(tdata->tx_desc_dtag, tdata->tx_desc_dmap);
2302                 bus_dmamem_free(tdata->tx_desc_dtag, tdata->tx_desc_base,
2303                                 tdata->tx_desc_dmap);
2304                 bus_dma_tag_destroy(tdata->tx_desc_dtag);
2305
2306                 tdata->tx_desc_base = NULL;
2307         }
2308
2309         if (tdata->tx_buf == NULL)
2310                 return;
2311
2312         for (i = 0; i < ndesc; i++) {
2313                 tx_buffer = &tdata->tx_buf[i];
2314
2315                 KKASSERT(tx_buffer->m_head == NULL);
2316                 bus_dmamap_destroy(tdata->txtag, tx_buffer->map);
2317         }
2318         bus_dma_tag_destroy(tdata->txtag);
2319
2320         kfree(tdata->tx_buf, M_DEVBUF);
2321         tdata->tx_buf = NULL;
2322 }
2323
2324 /*
2325  * The offload context needs to be set when we transfer the first
2326  * packet of a particular protocol (TCP/UDP).  This routine has been
2327  * enhanced to deal with inserted VLAN headers.
2328  *
2329  * If the new packet's ether header length, ip header length and
2330  * csum offloading type are same as the previous packet, we should
2331  * avoid allocating a new csum context descriptor; mainly to take
2332  * advantage of the pipeline effect of the TX data read request.
2333  *
2334  * This function returns number of TX descrptors allocated for
2335  * csum context.
2336  */
2337 static int
2338 emx_txcsum(struct emx_txdata *tdata, struct mbuf *mp,
2339            uint32_t *txd_upper, uint32_t *txd_lower)
2340 {
2341         struct e1000_context_desc *TXD;
2342         int curr_txd, ehdrlen, csum_flags;
2343         uint32_t cmd, hdr_len, ip_hlen;
2344
2345         csum_flags = mp->m_pkthdr.csum_flags & EMX_CSUM_FEATURES;
2346         ip_hlen = mp->m_pkthdr.csum_iphlen;
2347         ehdrlen = mp->m_pkthdr.csum_lhlen;
2348
2349         if ((tdata->tx_flags & EMX_TXFLAG_FORCECTX) == 0 &&
2350             tdata->csum_lhlen == ehdrlen && tdata->csum_iphlen == ip_hlen &&
2351             tdata->csum_flags == csum_flags) {
2352                 /*
2353                  * Same csum offload context as the previous packets;
2354                  * just return.
2355                  */
2356                 *txd_upper = tdata->csum_txd_upper;
2357                 *txd_lower = tdata->csum_txd_lower;
2358                 return 0;
2359         }
2360
2361         /*
2362          * Setup a new csum offload context.
2363          */
2364
2365         curr_txd = tdata->next_avail_tx_desc;
2366         TXD = (struct e1000_context_desc *)&tdata->tx_desc_base[curr_txd];
2367
2368         cmd = 0;
2369
2370         /* Setup of IP header checksum. */
2371         if (csum_flags & CSUM_IP) {
2372                 /*
2373                  * Start offset for header checksum calculation.
2374                  * End offset for header checksum calculation.
2375                  * Offset of place to put the checksum.
2376                  */
2377                 TXD->lower_setup.ip_fields.ipcss = ehdrlen;
2378                 TXD->lower_setup.ip_fields.ipcse =
2379                     htole16(ehdrlen + ip_hlen - 1);
2380                 TXD->lower_setup.ip_fields.ipcso =
2381                     ehdrlen + offsetof(struct ip, ip_sum);
2382                 cmd |= E1000_TXD_CMD_IP;
2383                 *txd_upper |= E1000_TXD_POPTS_IXSM << 8;
2384         }
2385         hdr_len = ehdrlen + ip_hlen;
2386
2387         if (csum_flags & CSUM_TCP) {
2388                 /*
2389                  * Start offset for payload checksum calculation.
2390                  * End offset for payload checksum calculation.
2391                  * Offset of place to put the checksum.
2392                  */
2393                 TXD->upper_setup.tcp_fields.tucss = hdr_len;
2394                 TXD->upper_setup.tcp_fields.tucse = htole16(0);
2395                 TXD->upper_setup.tcp_fields.tucso =
2396                     hdr_len + offsetof(struct tcphdr, th_sum);
2397                 cmd |= E1000_TXD_CMD_TCP;
2398                 *txd_upper |= E1000_TXD_POPTS_TXSM << 8;
2399         } else if (csum_flags & CSUM_UDP) {
2400                 /*
2401                  * Start offset for header checksum calculation.
2402                  * End offset for header checksum calculation.
2403                  * Offset of place to put the checksum.
2404                  */
2405                 TXD->upper_setup.tcp_fields.tucss = hdr_len;
2406                 TXD->upper_setup.tcp_fields.tucse = htole16(0);
2407                 TXD->upper_setup.tcp_fields.tucso =
2408                     hdr_len + offsetof(struct udphdr, uh_sum);
2409                 *txd_upper |= E1000_TXD_POPTS_TXSM << 8;
2410         }
2411
2412         *txd_lower = E1000_TXD_CMD_DEXT |       /* Extended descr type */
2413                      E1000_TXD_DTYP_D;          /* Data descr */
2414
2415         /* Save the information for this csum offloading context */
2416         tdata->csum_lhlen = ehdrlen;
2417         tdata->csum_iphlen = ip_hlen;
2418         tdata->csum_flags = csum_flags;
2419         tdata->csum_txd_upper = *txd_upper;
2420         tdata->csum_txd_lower = *txd_lower;
2421
2422         TXD->tcp_seg_setup.data = htole32(0);
2423         TXD->cmd_and_length =
2424             htole32(E1000_TXD_CMD_IFCS | E1000_TXD_CMD_DEXT | cmd);
2425
2426         if (++curr_txd == tdata->num_tx_desc)
2427                 curr_txd = 0;
2428
2429         KKASSERT(tdata->num_tx_desc_avail > 0);
2430         tdata->num_tx_desc_avail--;
2431
2432         tdata->next_avail_tx_desc = curr_txd;
2433         return 1;
2434 }
2435
2436 static void
2437 emx_txeof(struct emx_txdata *tdata)
2438 {
2439         struct ifnet *ifp = &tdata->sc->arpcom.ac_if;
2440         struct emx_txbuf *tx_buffer;
2441         int first, num_avail;
2442
2443         if (tdata->tx_dd_head == tdata->tx_dd_tail)
2444                 return;
2445
2446         if (tdata->num_tx_desc_avail == tdata->num_tx_desc)
2447                 return;
2448
2449         num_avail = tdata->num_tx_desc_avail;
2450         first = tdata->next_tx_to_clean;
2451
2452         while (tdata->tx_dd_head != tdata->tx_dd_tail) {
2453                 int dd_idx = tdata->tx_dd[tdata->tx_dd_head];
2454                 struct e1000_tx_desc *tx_desc;
2455
2456                 tx_desc = &tdata->tx_desc_base[dd_idx];
2457                 if (tx_desc->upper.fields.status & E1000_TXD_STAT_DD) {
2458                         EMX_INC_TXDD_IDX(tdata->tx_dd_head);
2459
2460                         if (++dd_idx == tdata->num_tx_desc)
2461                                 dd_idx = 0;
2462
2463                         while (first != dd_idx) {
2464                                 logif(pkt_txclean);
2465
2466                                 num_avail++;
2467
2468                                 tx_buffer = &tdata->tx_buf[first];
2469                                 if (tx_buffer->m_head) {
2470                                         ifp->if_opackets++;
2471                                         bus_dmamap_unload(tdata->txtag,
2472                                                           tx_buffer->map);
2473                                         m_freem(tx_buffer->m_head);
2474                                         tx_buffer->m_head = NULL;
2475                                 }
2476
2477                                 if (++first == tdata->num_tx_desc)
2478                                         first = 0;
2479                         }
2480                 } else {
2481                         break;
2482                 }
2483         }
2484         tdata->next_tx_to_clean = first;
2485         tdata->num_tx_desc_avail = num_avail;
2486
2487         if (tdata->tx_dd_head == tdata->tx_dd_tail) {
2488                 tdata->tx_dd_head = 0;
2489                 tdata->tx_dd_tail = 0;
2490         }
2491
2492         if (!EMX_IS_OACTIVE(tdata)) {
2493                 ifsq_clr_oactive(tdata->ifsq);
2494
2495                 /* All clean, turn off the timer */
2496                 if (tdata->num_tx_desc_avail == tdata->num_tx_desc)
2497                         tdata->tx_watchdog.wd_timer = 0;
2498         }
2499 }
2500
2501 static void
2502 emx_tx_collect(struct emx_txdata *tdata)
2503 {
2504         struct ifnet *ifp = &tdata->sc->arpcom.ac_if;
2505         struct emx_txbuf *tx_buffer;
2506         int tdh, first, num_avail, dd_idx = -1;
2507
2508         if (tdata->num_tx_desc_avail == tdata->num_tx_desc)
2509                 return;
2510
2511         tdh = E1000_READ_REG(&tdata->sc->hw, E1000_TDH(tdata->idx));
2512         if (tdh == tdata->next_tx_to_clean)
2513                 return;
2514
2515         if (tdata->tx_dd_head != tdata->tx_dd_tail)
2516                 dd_idx = tdata->tx_dd[tdata->tx_dd_head];
2517
2518         num_avail = tdata->num_tx_desc_avail;
2519         first = tdata->next_tx_to_clean;
2520
2521         while (first != tdh) {
2522                 logif(pkt_txclean);
2523
2524                 num_avail++;
2525
2526                 tx_buffer = &tdata->tx_buf[first];
2527                 if (tx_buffer->m_head) {
2528                         ifp->if_opackets++;
2529                         bus_dmamap_unload(tdata->txtag,
2530                                           tx_buffer->map);
2531                         m_freem(tx_buffer->m_head);
2532                         tx_buffer->m_head = NULL;
2533                 }
2534
2535                 if (first == dd_idx) {
2536                         EMX_INC_TXDD_IDX(tdata->tx_dd_head);
2537                         if (tdata->tx_dd_head == tdata->tx_dd_tail) {
2538                                 tdata->tx_dd_head = 0;
2539                                 tdata->tx_dd_tail = 0;
2540                                 dd_idx = -1;
2541                         } else {
2542                                 dd_idx = tdata->tx_dd[tdata->tx_dd_head];
2543                         }
2544                 }
2545
2546                 if (++first == tdata->num_tx_desc)
2547                         first = 0;
2548         }
2549         tdata->next_tx_to_clean = first;
2550         tdata->num_tx_desc_avail = num_avail;
2551
2552         if (!EMX_IS_OACTIVE(tdata)) {
2553                 ifsq_clr_oactive(tdata->ifsq);
2554
2555                 /* All clean, turn off the timer */
2556                 if (tdata->num_tx_desc_avail == tdata->num_tx_desc)
2557                         tdata->tx_watchdog.wd_timer = 0;
2558         }
2559 }
2560
2561 /*
2562  * When Link is lost sometimes there is work still in the TX ring
2563  * which will result in a watchdog, rather than allow that do an
2564  * attempted cleanup and then reinit here.  Note that this has been
2565  * seens mostly with fiber adapters.
2566  */
2567 static void
2568 emx_tx_purge(struct emx_softc *sc)
2569 {
2570         int i;
2571
2572         if (sc->link_active)
2573                 return;
2574
2575         for (i = 0; i < sc->tx_ring_inuse; ++i) {
2576                 struct emx_txdata *tdata = &sc->tx_data[i];
2577
2578                 if (tdata->tx_watchdog.wd_timer) {
2579                         emx_tx_collect(tdata);
2580                         if (tdata->tx_watchdog.wd_timer) {
2581                                 if_printf(&sc->arpcom.ac_if,
2582                                     "Link lost, TX pending, reinit\n");
2583                                 emx_init(sc);
2584                                 return;
2585                         }
2586                 }
2587         }
2588 }
2589
2590 static int
2591 emx_newbuf(struct emx_rxdata *rdata, int i, int init)
2592 {
2593         struct mbuf *m;
2594         bus_dma_segment_t seg;
2595         bus_dmamap_t map;
2596         struct emx_rxbuf *rx_buffer;
2597         int error, nseg;
2598
2599         m = m_getcl(init ? MB_WAIT : MB_DONTWAIT, MT_DATA, M_PKTHDR);
2600         if (m == NULL) {
2601                 if (init) {
2602                         if_printf(&rdata->sc->arpcom.ac_if,
2603                                   "Unable to allocate RX mbuf\n");
2604                 }
2605                 return (ENOBUFS);
2606         }
2607         m->m_len = m->m_pkthdr.len = MCLBYTES;
2608
2609         if (rdata->sc->max_frame_size <= MCLBYTES - ETHER_ALIGN)
2610                 m_adj(m, ETHER_ALIGN);
2611
2612         error = bus_dmamap_load_mbuf_segment(rdata->rxtag,
2613                         rdata->rx_sparemap, m,
2614                         &seg, 1, &nseg, BUS_DMA_NOWAIT);
2615         if (error) {
2616                 m_freem(m);
2617                 if (init) {
2618                         if_printf(&rdata->sc->arpcom.ac_if,
2619                                   "Unable to load RX mbuf\n");
2620                 }
2621                 return (error);
2622         }
2623
2624         rx_buffer = &rdata->rx_buf[i];
2625         if (rx_buffer->m_head != NULL)
2626                 bus_dmamap_unload(rdata->rxtag, rx_buffer->map);
2627
2628         map = rx_buffer->map;
2629         rx_buffer->map = rdata->rx_sparemap;
2630         rdata->rx_sparemap = map;
2631
2632         rx_buffer->m_head = m;
2633         rx_buffer->paddr = seg.ds_addr;
2634
2635         emx_setup_rxdesc(&rdata->rx_desc[i], rx_buffer);
2636         return (0);
2637 }
2638
2639 static int
2640 emx_create_rx_ring(struct emx_rxdata *rdata)
2641 {
2642         device_t dev = rdata->sc->dev;
2643         struct emx_rxbuf *rx_buffer;
2644         int i, error, rsize, nrxd;
2645
2646         /*
2647          * Validate number of receive descriptors.  It must not exceed
2648          * hardware maximum, and must be multiple of E1000_DBA_ALIGN.
2649          */
2650         nrxd = device_getenv_int(dev, "rxd", emx_rxd);
2651         if ((nrxd * sizeof(emx_rxdesc_t)) % EMX_DBA_ALIGN != 0 ||
2652             nrxd > EMX_MAX_RXD || nrxd < EMX_MIN_RXD) {
2653                 device_printf(dev, "Using %d RX descriptors instead of %d!\n",
2654                     EMX_DEFAULT_RXD, nrxd);
2655                 rdata->num_rx_desc = EMX_DEFAULT_RXD;
2656         } else {
2657                 rdata->num_rx_desc = nrxd;
2658         }
2659
2660         /*
2661          * Allocate Receive Descriptor ring
2662          */
2663         rsize = roundup2(rdata->num_rx_desc * sizeof(emx_rxdesc_t),
2664                          EMX_DBA_ALIGN);
2665         rdata->rx_desc = bus_dmamem_coherent_any(rdata->sc->parent_dtag,
2666                                 EMX_DBA_ALIGN, rsize, BUS_DMA_WAITOK,
2667                                 &rdata->rx_desc_dtag, &rdata->rx_desc_dmap,
2668                                 &rdata->rx_desc_paddr);
2669         if (rdata->rx_desc == NULL) {
2670                 device_printf(dev, "Unable to allocate rx_desc memory\n");
2671                 return ENOMEM;
2672         }
2673
2674         rsize = __VM_CACHELINE_ALIGN(
2675             sizeof(struct emx_rxbuf) * rdata->num_rx_desc);
2676         rdata->rx_buf = kmalloc_cachealign(rsize, M_DEVBUF, M_WAITOK | M_ZERO);
2677
2678         /*
2679          * Create DMA tag for rx buffers
2680          */
2681         error = bus_dma_tag_create(rdata->sc->parent_dtag, /* parent */
2682                         1, 0,                   /* alignment, bounds */
2683                         BUS_SPACE_MAXADDR,      /* lowaddr */
2684                         BUS_SPACE_MAXADDR,      /* highaddr */
2685                         NULL, NULL,             /* filter, filterarg */
2686                         MCLBYTES,               /* maxsize */
2687                         1,                      /* nsegments */
2688                         MCLBYTES,               /* maxsegsize */
2689                         BUS_DMA_WAITOK | BUS_DMA_ALLOCNOW, /* flags */
2690                         &rdata->rxtag);
2691         if (error) {
2692                 device_printf(dev, "Unable to allocate RX DMA tag\n");
2693                 kfree(rdata->rx_buf, M_DEVBUF);
2694                 rdata->rx_buf = NULL;
2695                 return error;
2696         }
2697
2698         /*
2699          * Create spare DMA map for rx buffers
2700          */
2701         error = bus_dmamap_create(rdata->rxtag, BUS_DMA_WAITOK,
2702                                   &rdata->rx_sparemap);
2703         if (error) {
2704                 device_printf(dev, "Unable to create spare RX DMA map\n");
2705                 bus_dma_tag_destroy(rdata->rxtag);
2706                 kfree(rdata->rx_buf, M_DEVBUF);
2707                 rdata->rx_buf = NULL;
2708                 return error;
2709         }
2710
2711         /*
2712          * Create DMA maps for rx buffers
2713          */
2714         for (i = 0; i < rdata->num_rx_desc; i++) {
2715                 rx_buffer = &rdata->rx_buf[i];
2716
2717                 error = bus_dmamap_create(rdata->rxtag, BUS_DMA_WAITOK,
2718                                           &rx_buffer->map);
2719                 if (error) {
2720                         device_printf(dev, "Unable to create RX DMA map\n");
2721                         emx_destroy_rx_ring(rdata, i);
2722                         return error;
2723                 }
2724         }
2725         return (0);
2726 }
2727
2728 static void
2729 emx_free_rx_ring(struct emx_rxdata *rdata)
2730 {
2731         int i;
2732
2733         for (i = 0; i < rdata->num_rx_desc; i++) {
2734                 struct emx_rxbuf *rx_buffer = &rdata->rx_buf[i];
2735
2736                 if (rx_buffer->m_head != NULL) {
2737                         bus_dmamap_unload(rdata->rxtag, rx_buffer->map);
2738                         m_freem(rx_buffer->m_head);
2739                         rx_buffer->m_head = NULL;
2740                 }
2741         }
2742
2743         if (rdata->fmp != NULL)
2744                 m_freem(rdata->fmp);
2745         rdata->fmp = NULL;
2746         rdata->lmp = NULL;
2747 }
2748
2749 static void
2750 emx_free_tx_ring(struct emx_txdata *tdata)
2751 {
2752         int i;
2753
2754         for (i = 0; i < tdata->num_tx_desc; i++) {
2755                 struct emx_txbuf *tx_buffer = &tdata->tx_buf[i];
2756
2757                 if (tx_buffer->m_head != NULL) {
2758                         bus_dmamap_unload(tdata->txtag, tx_buffer->map);
2759                         m_freem(tx_buffer->m_head);
2760                         tx_buffer->m_head = NULL;
2761                 }
2762         }
2763
2764         tdata->tx_flags &= ~EMX_TXFLAG_FORCECTX;
2765
2766         tdata->csum_flags = 0;
2767         tdata->csum_lhlen = 0;
2768         tdata->csum_iphlen = 0;
2769         tdata->csum_thlen = 0;
2770         tdata->csum_mss = 0;
2771         tdata->csum_pktlen = 0;
2772
2773         tdata->tx_dd_head = 0;
2774         tdata->tx_dd_tail = 0;
2775         tdata->tx_nsegs = 0;
2776 }
2777
2778 static int
2779 emx_init_rx_ring(struct emx_rxdata *rdata)
2780 {
2781         int i, error;
2782
2783         /* Reset descriptor ring */
2784         bzero(rdata->rx_desc, sizeof(emx_rxdesc_t) * rdata->num_rx_desc);
2785
2786         /* Allocate new ones. */
2787         for (i = 0; i < rdata->num_rx_desc; i++) {
2788                 error = emx_newbuf(rdata, i, 1);
2789                 if (error)
2790                         return (error);
2791         }
2792
2793         /* Setup our descriptor pointers */
2794         rdata->next_rx_desc_to_check = 0;
2795
2796         return (0);
2797 }
2798
2799 static void
2800 emx_init_rx_unit(struct emx_softc *sc)
2801 {
2802         struct ifnet *ifp = &sc->arpcom.ac_if;
2803         uint64_t bus_addr;
2804         uint32_t rctl, itr, rfctl;
2805         int i;
2806
2807         /*
2808          * Make sure receives are disabled while setting
2809          * up the descriptor ring
2810          */
2811         rctl = E1000_READ_REG(&sc->hw, E1000_RCTL);
2812         E1000_WRITE_REG(&sc->hw, E1000_RCTL, rctl & ~E1000_RCTL_EN);
2813
2814         /*
2815          * Set the interrupt throttling rate. Value is calculated
2816          * as ITR = 1 / (INT_THROTTLE_CEIL * 256ns)
2817          */
2818         if (sc->int_throttle_ceil)
2819                 itr = 1000000000 / 256 / sc->int_throttle_ceil;
2820         else
2821                 itr = 0;
2822         emx_set_itr(sc, itr);
2823
2824         /* Use extended RX descriptor */
2825         rfctl = E1000_RFCTL_EXTEN;
2826
2827         /* Disable accelerated ackknowledge */
2828         if (sc->hw.mac.type == e1000_82574)
2829                 rfctl |= E1000_RFCTL_ACK_DIS;
2830
2831         E1000_WRITE_REG(&sc->hw, E1000_RFCTL, rfctl);
2832
2833         /*
2834          * Receive Checksum Offload for TCP and UDP
2835          *
2836          * Checksum offloading is also enabled if multiple receive
2837          * queue is to be supported, since we need it to figure out
2838          * packet type.
2839          */
2840         if ((ifp->if_capenable & IFCAP_RXCSUM) ||
2841             sc->rx_ring_cnt > 1) {
2842                 uint32_t rxcsum;
2843
2844                 rxcsum = E1000_READ_REG(&sc->hw, E1000_RXCSUM);
2845
2846                 /*
2847                  * NOTE:
2848                  * PCSD must be enabled to enable multiple
2849                  * receive queues.
2850                  */
2851                 rxcsum |= E1000_RXCSUM_IPOFL | E1000_RXCSUM_TUOFL |
2852                           E1000_RXCSUM_PCSD;
2853                 E1000_WRITE_REG(&sc->hw, E1000_RXCSUM, rxcsum);
2854         }
2855
2856         /*
2857          * Configure multiple receive queue (RSS)
2858          */
2859         if (sc->rx_ring_cnt > 1) {
2860                 uint8_t key[EMX_NRSSRK * EMX_RSSRK_SIZE];
2861                 uint32_t reta;
2862
2863                 KASSERT(sc->rx_ring_cnt == EMX_NRX_RING,
2864                     ("invalid number of RX ring (%d)", sc->rx_ring_cnt));
2865
2866                 /*
2867                  * NOTE:
2868                  * When we reach here, RSS has already been disabled
2869                  * in emx_stop(), so we could safely configure RSS key
2870                  * and redirect table.
2871                  */
2872
2873                 /*
2874                  * Configure RSS key
2875                  */
2876                 toeplitz_get_key(key, sizeof(key));
2877                 for (i = 0; i < EMX_NRSSRK; ++i) {
2878                         uint32_t rssrk;
2879
2880                         rssrk = EMX_RSSRK_VAL(key, i);
2881                         EMX_RSS_DPRINTF(sc, 1, "rssrk%d 0x%08x\n", i, rssrk);
2882
2883                         E1000_WRITE_REG(&sc->hw, E1000_RSSRK(i), rssrk);
2884                 }
2885
2886                 /*
2887                  * Configure RSS redirect table in following fashion:
2888                  * (hash & ring_cnt_mask) == rdr_table[(hash & rdr_table_mask)]
2889                  */
2890                 reta = 0;
2891                 for (i = 0; i < EMX_RETA_SIZE; ++i) {
2892                         uint32_t q;
2893
2894                         q = (i % sc->rx_ring_cnt) << EMX_RETA_RINGIDX_SHIFT;
2895                         reta |= q << (8 * i);
2896                 }
2897                 EMX_RSS_DPRINTF(sc, 1, "reta 0x%08x\n", reta);
2898
2899                 for (i = 0; i < EMX_NRETA; ++i)
2900                         E1000_WRITE_REG(&sc->hw, E1000_RETA(i), reta);
2901
2902                 /*
2903                  * Enable multiple receive queues.
2904                  * Enable IPv4 RSS standard hash functions.
2905                  * Disable RSS interrupt.
2906                  */
2907                 E1000_WRITE_REG(&sc->hw, E1000_MRQC,
2908                                 E1000_MRQC_ENABLE_RSS_2Q |
2909                                 E1000_MRQC_RSS_FIELD_IPV4_TCP |
2910                                 E1000_MRQC_RSS_FIELD_IPV4);
2911         }
2912
2913         /*
2914          * XXX TEMPORARY WORKAROUND: on some systems with 82573
2915          * long latencies are observed, like Lenovo X60. This
2916          * change eliminates the problem, but since having positive
2917          * values in RDTR is a known source of problems on other
2918          * platforms another solution is being sought.
2919          */
2920         if (emx_82573_workaround && sc->hw.mac.type == e1000_82573) {
2921                 E1000_WRITE_REG(&sc->hw, E1000_RADV, EMX_RADV_82573);
2922                 E1000_WRITE_REG(&sc->hw, E1000_RDTR, EMX_RDTR_82573);
2923         }
2924
2925         for (i = 0; i < sc->rx_ring_cnt; ++i) {
2926                 struct emx_rxdata *rdata = &sc->rx_data[i];
2927
2928                 /*
2929                  * Setup the Base and Length of the Rx Descriptor Ring
2930                  */
2931                 bus_addr = rdata->rx_desc_paddr;
2932                 E1000_WRITE_REG(&sc->hw, E1000_RDLEN(i),
2933                     rdata->num_rx_desc * sizeof(emx_rxdesc_t));
2934                 E1000_WRITE_REG(&sc->hw, E1000_RDBAH(i),
2935                     (uint32_t)(bus_addr >> 32));
2936                 E1000_WRITE_REG(&sc->hw, E1000_RDBAL(i),
2937                     (uint32_t)bus_addr);
2938
2939                 /*
2940                  * Setup the HW Rx Head and Tail Descriptor Pointers
2941                  */
2942                 E1000_WRITE_REG(&sc->hw, E1000_RDH(i), 0);
2943                 E1000_WRITE_REG(&sc->hw, E1000_RDT(i),
2944                     sc->rx_data[i].num_rx_desc - 1);
2945         }
2946
2947         /* Setup the Receive Control Register */
2948         rctl &= ~(3 << E1000_RCTL_MO_SHIFT);
2949         rctl |= E1000_RCTL_EN | E1000_RCTL_BAM | E1000_RCTL_LBM_NO |
2950                 E1000_RCTL_RDMTS_HALF | E1000_RCTL_SECRC |
2951                 (sc->hw.mac.mc_filter_type << E1000_RCTL_MO_SHIFT);
2952
2953         /* Make sure VLAN Filters are off */
2954         rctl &= ~E1000_RCTL_VFE;
2955
2956         /* Don't store bad paket */
2957         rctl &= ~E1000_RCTL_SBP;
2958
2959         /* MCLBYTES */
2960         rctl |= E1000_RCTL_SZ_2048;
2961
2962         if (ifp->if_mtu > ETHERMTU)
2963                 rctl |= E1000_RCTL_LPE;
2964         else
2965                 rctl &= ~E1000_RCTL_LPE;
2966
2967         /* Enable Receives */
2968         E1000_WRITE_REG(&sc->hw, E1000_RCTL, rctl);
2969 }
2970
2971 static void
2972 emx_destroy_rx_ring(struct emx_rxdata *rdata, int ndesc)
2973 {
2974         struct emx_rxbuf *rx_buffer;
2975         int i;
2976
2977         /* Free Receive Descriptor ring */
2978         if (rdata->rx_desc) {
2979                 bus_dmamap_unload(rdata->rx_desc_dtag, rdata->rx_desc_dmap);
2980                 bus_dmamem_free(rdata->rx_desc_dtag, rdata->rx_desc,
2981                                 rdata->rx_desc_dmap);
2982                 bus_dma_tag_destroy(rdata->rx_desc_dtag);
2983
2984                 rdata->rx_desc = NULL;
2985         }
2986
2987         if (rdata->rx_buf == NULL)
2988                 return;
2989
2990         for (i = 0; i < ndesc; i++) {
2991                 rx_buffer = &rdata->rx_buf[i];
2992
2993                 KKASSERT(rx_buffer->m_head == NULL);
2994                 bus_dmamap_destroy(rdata->rxtag, rx_buffer->map);
2995         }
2996         bus_dmamap_destroy(rdata->rxtag, rdata->rx_sparemap);
2997         bus_dma_tag_destroy(rdata->rxtag);
2998
2999         kfree(rdata->rx_buf, M_DEVBUF);
3000         rdata->rx_buf = NULL;
3001 }
3002
3003 static void
3004 emx_rxeof(struct emx_rxdata *rdata, int count)
3005 {
3006         struct ifnet *ifp = &rdata->sc->arpcom.ac_if;
3007         uint32_t staterr;
3008         emx_rxdesc_t *current_desc;
3009         struct mbuf *mp;
3010         int i;
3011
3012         i = rdata->next_rx_desc_to_check;
3013         current_desc = &rdata->rx_desc[i];
3014         staterr = le32toh(current_desc->rxd_staterr);
3015
3016         if (!(staterr & E1000_RXD_STAT_DD))
3017                 return;
3018
3019         while ((staterr & E1000_RXD_STAT_DD) && count != 0) {
3020                 struct pktinfo *pi = NULL, pi0;
3021                 struct emx_rxbuf *rx_buf = &rdata->rx_buf[i];
3022                 struct mbuf *m = NULL;
3023                 int eop, len;
3024
3025                 logif(pkt_receive);
3026
3027                 mp = rx_buf->m_head;
3028
3029                 /*
3030                  * Can't defer bus_dmamap_sync(9) because TBI_ACCEPT
3031                  * needs to access the last received byte in the mbuf.
3032                  */
3033                 bus_dmamap_sync(rdata->rxtag, rx_buf->map,
3034                                 BUS_DMASYNC_POSTREAD);
3035
3036                 len = le16toh(current_desc->rxd_length);
3037                 if (staterr & E1000_RXD_STAT_EOP) {
3038                         count--;
3039                         eop = 1;
3040                 } else {
3041                         eop = 0;
3042                 }
3043
3044                 if (!(staterr & E1000_RXDEXT_ERR_FRAME_ERR_MASK)) {
3045                         uint16_t vlan = 0;
3046                         uint32_t mrq, rss_hash;
3047
3048                         /*
3049                          * Save several necessary information,
3050                          * before emx_newbuf() destroy it.
3051                          */
3052                         if ((staterr & E1000_RXD_STAT_VP) && eop)
3053                                 vlan = le16toh(current_desc->rxd_vlan);
3054
3055                         mrq = le32toh(current_desc->rxd_mrq);
3056                         rss_hash = le32toh(current_desc->rxd_rss);
3057
3058                         EMX_RSS_DPRINTF(rdata->sc, 10,
3059                             "ring%d, mrq 0x%08x, rss_hash 0x%08x\n",
3060                             rdata->idx, mrq, rss_hash);
3061
3062                         if (emx_newbuf(rdata, i, 0) != 0) {
3063                                 ifp->if_iqdrops++;
3064                                 goto discard;
3065                         }
3066
3067                         /* Assign correct length to the current fragment */
3068                         mp->m_len = len;
3069
3070                         if (rdata->fmp == NULL) {
3071                                 mp->m_pkthdr.len = len;
3072                                 rdata->fmp = mp; /* Store the first mbuf */
3073                                 rdata->lmp = mp;
3074                         } else {
3075                                 /*
3076                                  * Chain mbuf's together
3077                                  */
3078                                 rdata->lmp->m_next = mp;
3079                                 rdata->lmp = rdata->lmp->m_next;
3080                                 rdata->fmp->m_pkthdr.len += len;
3081                         }
3082
3083                         if (eop) {
3084                                 rdata->fmp->m_pkthdr.rcvif = ifp;
3085                                 ifp->if_ipackets++;
3086
3087                                 if (ifp->if_capenable & IFCAP_RXCSUM)
3088                                         emx_rxcsum(staterr, rdata->fmp);
3089
3090                                 if (staterr & E1000_RXD_STAT_VP) {
3091                                         rdata->fmp->m_pkthdr.ether_vlantag =
3092                                             vlan;
3093                                         rdata->fmp->m_flags |= M_VLANTAG;
3094                                 }
3095                                 m = rdata->fmp;
3096                                 rdata->fmp = NULL;
3097                                 rdata->lmp = NULL;
3098
3099                                 if (ifp->if_capenable & IFCAP_RSS) {
3100                                         pi = emx_rssinfo(m, &pi0, mrq,
3101                                                          rss_hash, staterr);
3102                                 }
3103 #ifdef EMX_RSS_DEBUG
3104                                 rdata->rx_pkts++;
3105 #endif
3106                         }
3107                 } else {
3108                         ifp->if_ierrors++;
3109 discard:
3110                         emx_setup_rxdesc(current_desc, rx_buf);
3111                         if (rdata->fmp != NULL) {
3112                                 m_freem(rdata->fmp);
3113                                 rdata->fmp = NULL;
3114                                 rdata->lmp = NULL;
3115                         }
3116                         m = NULL;
3117                 }
3118
3119                 if (m != NULL)
3120                         ether_input_pkt(ifp, m, pi);
3121
3122                 /* Advance our pointers to the next descriptor. */
3123                 if (++i == rdata->num_rx_desc)
3124                         i = 0;
3125
3126                 current_desc = &rdata->rx_desc[i];
3127                 staterr = le32toh(current_desc->rxd_staterr);
3128         }
3129         rdata->next_rx_desc_to_check = i;
3130
3131         /* Advance the E1000's Receive Queue "Tail Pointer". */
3132         if (--i < 0)
3133                 i = rdata->num_rx_desc - 1;
3134         E1000_WRITE_REG(&rdata->sc->hw, E1000_RDT(rdata->idx), i);
3135 }
3136
3137 static void
3138 emx_enable_intr(struct emx_softc *sc)
3139 {
3140         uint32_t ims_mask = IMS_ENABLE_MASK;
3141
3142         lwkt_serialize_handler_enable(&sc->main_serialize);
3143
3144 #if 0
3145         if (sc->hw.mac.type == e1000_82574) {
3146                 E1000_WRITE_REG(hw, EMX_EIAC, EM_MSIX_MASK);
3147                 ims_mask |= EM_MSIX_MASK;
3148         }
3149 #endif
3150         E1000_WRITE_REG(&sc->hw, E1000_IMS, ims_mask);
3151 }
3152
3153 static void
3154 emx_disable_intr(struct emx_softc *sc)
3155 {
3156         if (sc->hw.mac.type == e1000_82574)
3157                 E1000_WRITE_REG(&sc->hw, EMX_EIAC, 0);
3158         E1000_WRITE_REG(&sc->hw, E1000_IMC, 0xffffffff);
3159
3160         lwkt_serialize_handler_disable(&sc->main_serialize);
3161 }
3162
3163 /*
3164  * Bit of a misnomer, what this really means is
3165  * to enable OS management of the system... aka
3166  * to disable special hardware management features 
3167  */
3168 static void
3169 emx_get_mgmt(struct emx_softc *sc)
3170 {
3171         /* A shared code workaround */
3172         if (sc->flags & EMX_FLAG_HAS_MGMT) {
3173                 int manc2h = E1000_READ_REG(&sc->hw, E1000_MANC2H);
3174                 int manc = E1000_READ_REG(&sc->hw, E1000_MANC);
3175
3176                 /* disable hardware interception of ARP */
3177                 manc &= ~(E1000_MANC_ARP_EN);
3178
3179                 /* enable receiving management packets to the host */
3180                 manc |= E1000_MANC_EN_MNG2HOST;
3181 #define E1000_MNG2HOST_PORT_623 (1 << 5)
3182 #define E1000_MNG2HOST_PORT_664 (1 << 6)
3183                 manc2h |= E1000_MNG2HOST_PORT_623;
3184                 manc2h |= E1000_MNG2HOST_PORT_664;
3185                 E1000_WRITE_REG(&sc->hw, E1000_MANC2H, manc2h);
3186
3187                 E1000_WRITE_REG(&sc->hw, E1000_MANC, manc);
3188         }
3189 }
3190
3191 /*
3192  * Give control back to hardware management
3193  * controller if there is one.
3194  */
3195 static void
3196 emx_rel_mgmt(struct emx_softc *sc)
3197 {
3198         if (sc->flags & EMX_FLAG_HAS_MGMT) {
3199                 int manc = E1000_READ_REG(&sc->hw, E1000_MANC);
3200
3201                 /* re-enable hardware interception of ARP */
3202                 manc |= E1000_MANC_ARP_EN;
3203                 manc &= ~E1000_MANC_EN_MNG2HOST;
3204
3205                 E1000_WRITE_REG(&sc->hw, E1000_MANC, manc);
3206         }
3207 }
3208
3209 /*
3210  * emx_get_hw_control() sets {CTRL_EXT|FWSM}:DRV_LOAD bit.
3211  * For ASF and Pass Through versions of f/w this means that
3212  * the driver is loaded.  For AMT version (only with 82573)
3213  * of the f/w this means that the network i/f is open.
3214  */
3215 static void
3216 emx_get_hw_control(struct emx_softc *sc)
3217 {
3218         /* Let firmware know the driver has taken over */
3219         if (sc->hw.mac.type == e1000_82573) {
3220                 uint32_t swsm;
3221
3222                 swsm = E1000_READ_REG(&sc->hw, E1000_SWSM);
3223                 E1000_WRITE_REG(&sc->hw, E1000_SWSM,
3224                     swsm | E1000_SWSM_DRV_LOAD);
3225         } else {
3226                 uint32_t ctrl_ext;
3227
3228                 ctrl_ext = E1000_READ_REG(&sc->hw, E1000_CTRL_EXT);
3229                 E1000_WRITE_REG(&sc->hw, E1000_CTRL_EXT,
3230                     ctrl_ext | E1000_CTRL_EXT_DRV_LOAD);
3231         }
3232         sc->flags |= EMX_FLAG_HW_CTRL;
3233 }
3234
3235 /*
3236  * emx_rel_hw_control() resets {CTRL_EXT|FWSM}:DRV_LOAD bit.
3237  * For ASF and Pass Through versions of f/w this means that the
3238  * driver is no longer loaded.  For AMT version (only with 82573)
3239  * of the f/w this means that the network i/f is closed.
3240  */
3241 static void
3242 emx_rel_hw_control(struct emx_softc *sc)
3243 {
3244         if ((sc->flags & EMX_FLAG_HW_CTRL) == 0)
3245                 return;
3246         sc->flags &= ~EMX_FLAG_HW_CTRL;
3247
3248         /* Let firmware taken over control of h/w */
3249         if (sc->hw.mac.type == e1000_82573) {
3250                 uint32_t swsm;
3251
3252                 swsm = E1000_READ_REG(&sc->hw, E1000_SWSM);
3253                 E1000_WRITE_REG(&sc->hw, E1000_SWSM,
3254                     swsm & ~E1000_SWSM_DRV_LOAD);
3255         } else {
3256                 uint32_t ctrl_ext;
3257
3258                 ctrl_ext = E1000_READ_REG(&sc->hw, E1000_CTRL_EXT);
3259                 E1000_WRITE_REG(&sc->hw, E1000_CTRL_EXT,
3260                     ctrl_ext & ~E1000_CTRL_EXT_DRV_LOAD);
3261         }
3262 }
3263
3264 static int
3265 emx_is_valid_eaddr(const uint8_t *addr)
3266 {
3267         char zero_addr[ETHER_ADDR_LEN] = { 0, 0, 0, 0, 0, 0 };
3268
3269         if ((addr[0] & 1) || !bcmp(addr, zero_addr, ETHER_ADDR_LEN))
3270                 return (FALSE);
3271
3272         return (TRUE);
3273 }
3274
3275 /*
3276  * Enable PCI Wake On Lan capability
3277  */
3278 void
3279 emx_enable_wol(device_t dev)
3280 {
3281         uint16_t cap, status;
3282         uint8_t id;
3283
3284         /* First find the capabilities pointer*/
3285         cap = pci_read_config(dev, PCIR_CAP_PTR, 2);
3286
3287         /* Read the PM Capabilities */
3288         id = pci_read_config(dev, cap, 1);
3289         if (id != PCIY_PMG)     /* Something wrong */
3290                 return;
3291
3292         /*
3293          * OK, we have the power capabilities,
3294          * so now get the status register
3295          */
3296         cap += PCIR_POWER_STATUS;
3297         status = pci_read_config(dev, cap, 2);
3298         status |= PCIM_PSTAT_PME | PCIM_PSTAT_PMEENABLE;
3299         pci_write_config(dev, cap, status, 2);
3300 }
3301
3302 static void
3303 emx_update_stats(struct emx_softc *sc)
3304 {
3305         struct ifnet *ifp = &sc->arpcom.ac_if;
3306
3307         if (sc->hw.phy.media_type == e1000_media_type_copper ||
3308             (E1000_READ_REG(&sc->hw, E1000_STATUS) & E1000_STATUS_LU)) {
3309                 sc->stats.symerrs += E1000_READ_REG(&sc->hw, E1000_SYMERRS);
3310                 sc->stats.sec += E1000_READ_REG(&sc->hw, E1000_SEC);
3311         }
3312         sc->stats.crcerrs += E1000_READ_REG(&sc->hw, E1000_CRCERRS);
3313         sc->stats.mpc += E1000_READ_REG(&sc->hw, E1000_MPC);
3314         sc->stats.scc += E1000_READ_REG(&sc->hw, E1000_SCC);
3315         sc->stats.ecol += E1000_READ_REG(&sc->hw, E1000_ECOL);
3316
3317         sc->stats.mcc += E1000_READ_REG(&sc->hw, E1000_MCC);
3318         sc->stats.latecol += E1000_READ_REG(&sc->hw, E1000_LATECOL);
3319         sc->stats.colc += E1000_READ_REG(&sc->hw, E1000_COLC);
3320         sc->stats.dc += E1000_READ_REG(&sc->hw, E1000_DC);
3321         sc->stats.rlec += E1000_READ_REG(&sc->hw, E1000_RLEC);
3322         sc->stats.xonrxc += E1000_READ_REG(&sc->hw, E1000_XONRXC);
3323         sc->stats.xontxc += E1000_READ_REG(&sc->hw, E1000_XONTXC);
3324         sc->stats.xoffrxc += E1000_READ_REG(&sc->hw, E1000_XOFFRXC);
3325         sc->stats.xofftxc += E1000_READ_REG(&sc->hw, E1000_XOFFTXC);
3326         sc->stats.fcruc += E1000_READ_REG(&sc->hw, E1000_FCRUC);
3327         sc->stats.prc64 += E1000_READ_REG(&sc->hw, E1000_PRC64);
3328         sc->stats.prc127 += E1000_READ_REG(&sc->hw, E1000_PRC127);
3329         sc->stats.prc255 += E1000_READ_REG(&sc->hw, E1000_PRC255);
3330         sc->stats.prc511 += E1000_READ_REG(&sc->hw, E1000_PRC511);
3331         sc->stats.prc1023 += E1000_READ_REG(&sc->hw, E1000_PRC1023);
3332         sc->stats.prc1522 += E1000_READ_REG(&sc->hw, E1000_PRC1522);
3333         sc->stats.gprc += E1000_READ_REG(&sc->hw, E1000_GPRC);
3334         sc->stats.bprc += E1000_READ_REG(&sc->hw, E1000_BPRC);
3335         sc->stats.mprc += E1000_READ_REG(&sc->hw, E1000_MPRC);
3336         sc->stats.gptc += E1000_READ_REG(&sc->hw, E1000_GPTC);
3337
3338         /* For the 64-bit byte counters the low dword must be read first. */
3339         /* Both registers clear on the read of the high dword */
3340
3341         sc->stats.gorc += E1000_READ_REG(&sc->hw, E1000_GORCH);
3342         sc->stats.gotc += E1000_READ_REG(&sc->hw, E1000_GOTCH);
3343
3344         sc->stats.rnbc += E1000_READ_REG(&sc->hw, E1000_RNBC);
3345         sc->stats.ruc += E1000_READ_REG(&sc->hw, E1000_RUC);
3346         sc->stats.rfc += E1000_READ_REG(&sc->hw, E1000_RFC);
3347         sc->stats.roc += E1000_READ_REG(&sc->hw, E1000_ROC);
3348         sc->stats.rjc += E1000_READ_REG(&sc->hw, E1000_RJC);
3349
3350         sc->stats.tor += E1000_READ_REG(&sc->hw, E1000_TORH);
3351         sc->stats.tot += E1000_READ_REG(&sc->hw, E1000_TOTH);
3352
3353         sc->stats.tpr += E1000_READ_REG(&sc->hw, E1000_TPR);
3354         sc->stats.tpt += E1000_READ_REG(&sc->hw, E1000_TPT);
3355         sc->stats.ptc64 += E1000_READ_REG(&sc->hw, E1000_PTC64);
3356         sc->stats.ptc127 += E1000_READ_REG(&sc->hw, E1000_PTC127);
3357         sc->stats.ptc255 += E1000_READ_REG(&sc->hw, E1000_PTC255);
3358         sc->stats.ptc511 += E1000_READ_REG(&sc->hw, E1000_PTC511);
3359         sc->stats.ptc1023 += E1000_READ_REG(&sc->hw, E1000_PTC1023);
3360         sc->stats.ptc1522 += E1000_READ_REG(&sc->hw, E1000_PTC1522);
3361         sc->stats.mptc += E1000_READ_REG(&sc->hw, E1000_MPTC);
3362         sc->stats.bptc += E1000_READ_REG(&sc->hw, E1000_BPTC);
3363
3364         sc->stats.algnerrc += E1000_READ_REG(&sc->hw, E1000_ALGNERRC);
3365         sc->stats.rxerrc += E1000_READ_REG(&sc->hw, E1000_RXERRC);
3366         sc->stats.tncrs += E1000_READ_REG(&sc->hw, E1000_TNCRS);
3367         sc->stats.cexterr += E1000_READ_REG(&sc->hw, E1000_CEXTERR);
3368         sc->stats.tsctc += E1000_READ_REG(&sc->hw, E1000_TSCTC);
3369         sc->stats.tsctfc += E1000_READ_REG(&sc->hw, E1000_TSCTFC);
3370
3371         ifp->if_collisions = sc->stats.colc;
3372
3373         /* Rx Errors */
3374         ifp->if_ierrors = sc->stats.rxerrc +
3375                           sc->stats.crcerrs + sc->stats.algnerrc +
3376                           sc->stats.ruc + sc->stats.roc +
3377                           sc->stats.mpc + sc->stats.cexterr;
3378
3379         /* Tx Errors */
3380         ifp->if_oerrors = sc->stats.ecol + sc->stats.latecol;
3381 }
3382
3383 static void
3384 emx_print_debug_info(struct emx_softc *sc)
3385 {
3386         device_t dev = sc->dev;
3387         uint8_t *hw_addr = sc->hw.hw_addr;
3388         int i;
3389
3390         device_printf(dev, "Adapter hardware address = %p \n", hw_addr);
3391         device_printf(dev, "CTRL = 0x%x RCTL = 0x%x \n",
3392             E1000_READ_REG(&sc->hw, E1000_CTRL),
3393             E1000_READ_REG(&sc->hw, E1000_RCTL));
3394         device_printf(dev, "Packet buffer = Tx=%dk Rx=%dk \n",
3395             ((E1000_READ_REG(&sc->hw, E1000_PBA) & 0xffff0000) >> 16),\
3396             (E1000_READ_REG(&sc->hw, E1000_PBA) & 0xffff) );
3397         device_printf(dev, "Flow control watermarks high = %d low = %d\n",
3398             sc->hw.fc.high_water, sc->hw.fc.low_water);
3399         device_printf(dev, "tx_int_delay = %d, tx_abs_int_delay = %d\n",
3400             E1000_READ_REG(&sc->hw, E1000_TIDV),
3401             E1000_READ_REG(&sc->hw, E1000_TADV));
3402         device_printf(dev, "rx_int_delay = %d, rx_abs_int_delay = %d\n",
3403             E1000_READ_REG(&sc->hw, E1000_RDTR),
3404             E1000_READ_REG(&sc->hw, E1000_RADV));
3405
3406         for (i = 0; i < sc->tx_ring_cnt; ++i) {
3407                 device_printf(dev, "hw %d tdh = %d, hw tdt = %d\n", i,
3408                     E1000_READ_REG(&sc->hw, E1000_TDH(i)),
3409                     E1000_READ_REG(&sc->hw, E1000_TDT(i)));
3410         }
3411         for (i = 0; i < sc->rx_ring_cnt; ++i) {
3412                 device_printf(dev, "hw %d rdh = %d, hw rdt = %d\n", i,
3413                     E1000_READ_REG(&sc->hw, E1000_RDH(i)),
3414                     E1000_READ_REG(&sc->hw, E1000_RDT(i)));
3415         }
3416
3417         for (i = 0; i < sc->tx_ring_cnt; ++i) {
3418                 device_printf(dev, "TX %d Tx descriptors avail = %d\n", i,
3419                     sc->tx_data[i].num_tx_desc_avail);
3420                 device_printf(dev, "TX %d TSO segments = %lu\n", i,
3421                     sc->tx_data[i].tso_segments);
3422                 device_printf(dev, "TX %d TSO ctx reused = %lu\n", i,
3423                     sc->tx_data[i].tso_ctx_reused);
3424         }
3425 }
3426
3427 static void
3428 emx_print_hw_stats(struct emx_softc *sc)
3429 {
3430         device_t dev = sc->dev;
3431
3432         device_printf(dev, "Excessive collisions = %lld\n",
3433             (long long)sc->stats.ecol);
3434 #if (DEBUG_HW > 0)  /* Dont output these errors normally */
3435         device_printf(dev, "Symbol errors = %lld\n",
3436             (long long)sc->stats.symerrs);
3437 #endif
3438         device_printf(dev, "Sequence errors = %lld\n",
3439             (long long)sc->stats.sec);
3440         device_printf(dev, "Defer count = %lld\n",
3441             (long long)sc->stats.dc);
3442         device_printf(dev, "Missed Packets = %lld\n",
3443             (long long)sc->stats.mpc);
3444         device_printf(dev, "Receive No Buffers = %lld\n",
3445             (long long)sc->stats.rnbc);
3446         /* RLEC is inaccurate on some hardware, calculate our own. */
3447         device_printf(dev, "Receive Length Errors = %lld\n",
3448             ((long long)sc->stats.roc + (long long)sc->stats.ruc));
3449         device_printf(dev, "Receive errors = %lld\n",
3450             (long long)sc->stats.rxerrc);
3451         device_printf(dev, "Crc errors = %lld\n",
3452             (long long)sc->stats.crcerrs);
3453         device_printf(dev, "Alignment errors = %lld\n",
3454             (long long)sc->stats.algnerrc);
3455         device_printf(dev, "Collision/Carrier extension errors = %lld\n",
3456             (long long)sc->stats.cexterr);
3457         device_printf(dev, "RX overruns = %ld\n", sc->rx_overruns);
3458         device_printf(dev, "XON Rcvd = %lld\n",
3459             (long long)sc->stats.xonrxc);
3460         device_printf(dev, "XON Xmtd = %lld\n",
3461             (long long)sc->stats.xontxc);
3462         device_printf(dev, "XOFF Rcvd = %lld\n",
3463             (long long)sc->stats.xoffrxc);
3464         device_printf(dev, "XOFF Xmtd = %lld\n",
3465             (long long)sc->stats.xofftxc);
3466         device_printf(dev, "Good Packets Rcvd = %lld\n",
3467             (long long)sc->stats.gprc);
3468         device_printf(dev, "Good Packets Xmtd = %lld\n",
3469             (long long)sc->stats.gptc);
3470 }
3471
3472 static void
3473 emx_print_nvm_info(struct emx_softc *sc)
3474 {
3475         uint16_t eeprom_data;
3476         int i, j, row = 0;
3477
3478         /* Its a bit crude, but it gets the job done */
3479         kprintf("\nInterface EEPROM Dump:\n");
3480         kprintf("Offset\n0x0000  ");
3481         for (i = 0, j = 0; i < 32; i++, j++) {
3482                 if (j == 8) { /* Make the offset block */
3483                         j = 0; ++row;
3484                         kprintf("\n0x00%x0  ",row);
3485                 }
3486                 e1000_read_nvm(&sc->hw, i, 1, &eeprom_data);
3487                 kprintf("%04x ", eeprom_data);
3488         }
3489         kprintf("\n");
3490 }
3491
3492 static int
3493 emx_sysctl_debug_info(SYSCTL_HANDLER_ARGS)
3494 {
3495         struct emx_softc *sc;
3496         struct ifnet *ifp;
3497         int error, result;
3498
3499         result = -1;
3500         error = sysctl_handle_int(oidp, &result, 0, req);
3501         if (error || !req->newptr)
3502                 return (error);
3503
3504         sc = (struct emx_softc *)arg1;
3505         ifp = &sc->arpcom.ac_if;
3506
3507         ifnet_serialize_all(ifp);
3508
3509         if (result == 1)
3510                 emx_print_debug_info(sc);
3511
3512         /*
3513          * This value will cause a hex dump of the
3514          * first 32 16-bit words of the EEPROM to
3515          * the screen.
3516          */
3517         if (result == 2)
3518                 emx_print_nvm_info(sc);
3519
3520         ifnet_deserialize_all(ifp);
3521
3522         return (error);
3523 }
3524
3525 static int
3526 emx_sysctl_stats(SYSCTL_HANDLER_ARGS)
3527 {
3528         int error, result;
3529
3530         result = -1;
3531         error = sysctl_handle_int(oidp, &result, 0, req);
3532         if (error || !req->newptr)
3533                 return (error);
3534
3535         if (result == 1) {
3536                 struct emx_softc *sc = (struct emx_softc *)arg1;
3537                 struct ifnet *ifp = &sc->arpcom.ac_if;
3538
3539                 ifnet_serialize_all(ifp);
3540                 emx_print_hw_stats(sc);
3541                 ifnet_deserialize_all(ifp);
3542         }
3543         return (error);
3544 }
3545
3546 static void
3547 emx_add_sysctl(struct emx_softc *sc)
3548 {
3549 #if defined(EMX_RSS_DEBUG) || defined(EMX_TSS_DEBUG)
3550         char pkt_desc[32];
3551         int i;
3552 #endif
3553
3554         sysctl_ctx_init(&sc->sysctl_ctx);
3555         sc->sysctl_tree = SYSCTL_ADD_NODE(&sc->sysctl_ctx,
3556                                 SYSCTL_STATIC_CHILDREN(_hw), OID_AUTO,
3557                                 device_get_nameunit(sc->dev),
3558                                 CTLFLAG_RD, 0, "");
3559         if (sc->sysctl_tree == NULL) {
3560                 device_printf(sc->dev, "can't add sysctl node\n");
3561                 return;
3562         }
3563
3564         SYSCTL_ADD_PROC(&sc->sysctl_ctx, SYSCTL_CHILDREN(sc->sysctl_tree),
3565                         OID_AUTO, "debug", CTLTYPE_INT|CTLFLAG_RW, sc, 0,
3566                         emx_sysctl_debug_info, "I", "Debug Information");
3567
3568         SYSCTL_ADD_PROC(&sc->sysctl_ctx, SYSCTL_CHILDREN(sc->sysctl_tree),
3569                         OID_AUTO, "stats", CTLTYPE_INT|CTLFLAG_RW, sc, 0,
3570                         emx_sysctl_stats, "I", "Statistics");
3571
3572         SYSCTL_ADD_INT(&sc->sysctl_ctx, SYSCTL_CHILDREN(sc->sysctl_tree),
3573             OID_AUTO, "rxd", CTLFLAG_RD, &sc->rx_data[0].num_rx_desc, 0,
3574             "# of RX descs");
3575         SYSCTL_ADD_INT(&sc->sysctl_ctx, SYSCTL_CHILDREN(sc->sysctl_tree),
3576             OID_AUTO, "txd", CTLFLAG_RD, &sc->tx_data[0].num_tx_desc, 0,
3577             "# of TX descs");
3578
3579         SYSCTL_ADD_PROC(&sc->sysctl_ctx, SYSCTL_CHILDREN(sc->sysctl_tree),
3580             OID_AUTO, "int_throttle_ceil", CTLTYPE_INT|CTLFLAG_RW, sc, 0,
3581             emx_sysctl_int_throttle, "I", "interrupt throttling rate");
3582         SYSCTL_ADD_PROC(&sc->sysctl_ctx, SYSCTL_CHILDREN(sc->sysctl_tree),
3583             OID_AUTO, "tx_intr_nsegs", CTLTYPE_INT|CTLFLAG_RW, sc, 0,
3584             emx_sysctl_tx_intr_nsegs, "I", "# segments per TX interrupt");
3585         SYSCTL_ADD_PROC(&sc->sysctl_ctx, SYSCTL_CHILDREN(sc->sysctl_tree),
3586             OID_AUTO, "tx_wreg_nsegs", CTLTYPE_INT|CTLFLAG_RW, sc, 0,
3587             emx_sysctl_tx_wreg_nsegs, "I",
3588             "# segments sent before write to hardware register");
3589
3590         SYSCTL_ADD_INT(&sc->sysctl_ctx, SYSCTL_CHILDREN(sc->sysctl_tree),
3591             OID_AUTO, "rx_ring_cnt", CTLFLAG_RD, &sc->rx_ring_cnt, 0,
3592             "# of RX rings");
3593         SYSCTL_ADD_INT(&sc->sysctl_ctx, SYSCTL_CHILDREN(sc->sysctl_tree),
3594             OID_AUTO, "tx_ring_cnt", CTLFLAG_RD, &sc->tx_ring_cnt, 0,
3595             "# of TX rings");
3596         SYSCTL_ADD_INT(&sc->sysctl_ctx, SYSCTL_CHILDREN(sc->sysctl_tree),
3597             OID_AUTO, "tx_ring_inuse", CTLFLAG_RD, &sc->tx_ring_inuse, 0,
3598             "# of TX rings used");
3599
3600 #ifdef IFPOLL_ENABLE
3601         SYSCTL_ADD_PROC(&sc->sysctl_ctx, SYSCTL_CHILDREN(sc->sysctl_tree),
3602                         OID_AUTO, "npoll_rxoff", CTLTYPE_INT|CTLFLAG_RW,
3603                         sc, 0, emx_sysctl_npoll_rxoff, "I",
3604                         "NPOLLING RX cpu offset");
3605         SYSCTL_ADD_PROC(&sc->sysctl_ctx, SYSCTL_CHILDREN(sc->sysctl_tree),
3606                         OID_AUTO, "npoll_txoff", CTLTYPE_INT|CTLFLAG_RW,
3607                         sc, 0, emx_sysctl_npoll_txoff, "I",
3608                         "NPOLLING TX cpu offset");
3609 #endif
3610
3611 #ifdef EMX_RSS_DEBUG
3612         SYSCTL_ADD_INT(&sc->sysctl_ctx, SYSCTL_CHILDREN(sc->sysctl_tree),
3613                        OID_AUTO, "rss_debug", CTLFLAG_RW, &sc->rss_debug,
3614                        0, "RSS debug level");
3615         for (i = 0; i < sc->rx_ring_cnt; ++i) {
3616                 ksnprintf(pkt_desc, sizeof(pkt_desc), "rx%d_pkt", i);
3617                 SYSCTL_ADD_ULONG(&sc->sysctl_ctx,
3618                     SYSCTL_CHILDREN(sc->sysctl_tree), OID_AUTO,
3619                     pkt_desc, CTLFLAG_RW, &sc->rx_data[i].rx_pkts,
3620                     "RXed packets");
3621         }
3622 #endif
3623 #ifdef EMX_TSS_DEBUG
3624         for (i = 0; i < sc->tx_ring_cnt; ++i) {
3625                 ksnprintf(pkt_desc, sizeof(pkt_desc), "tx%d_pkt", i);
3626                 SYSCTL_ADD_ULONG(&sc->sysctl_ctx,
3627                     SYSCTL_CHILDREN(sc->sysctl_tree), OID_AUTO,
3628                     pkt_desc, CTLFLAG_RW, &sc->tx_data[i].tx_pkts,
3629                     "TXed packets");
3630         }
3631 #endif
3632 }
3633
3634 static int
3635 emx_sysctl_int_throttle(SYSCTL_HANDLER_ARGS)
3636 {
3637         struct emx_softc *sc = (void *)arg1;
3638         struct ifnet *ifp = &sc->arpcom.ac_if;
3639         int error, throttle;
3640
3641         throttle = sc->int_throttle_ceil;
3642         error = sysctl_handle_int(oidp, &throttle, 0, req);
3643         if (error || req->newptr == NULL)
3644                 return error;
3645         if (throttle < 0 || throttle > 1000000000 / 256)
3646                 return EINVAL;
3647
3648         if (throttle) {
3649                 /*
3650                  * Set the interrupt throttling rate in 256ns increments,
3651                  * recalculate sysctl value assignment to get exact frequency.
3652                  */
3653                 throttle = 1000000000 / 256 / throttle;
3654
3655                 /* Upper 16bits of ITR is reserved and should be zero */
3656                 if (throttle & 0xffff0000)
3657                         return EINVAL;
3658         }
3659
3660         ifnet_serialize_all(ifp);
3661
3662         if (throttle)
3663                 sc->int_throttle_ceil = 1000000000 / 256 / throttle;
3664         else
3665                 sc->int_throttle_ceil = 0;
3666
3667         if (ifp->if_flags & IFF_RUNNING)
3668                 emx_set_itr(sc, throttle);
3669
3670         ifnet_deserialize_all(ifp);
3671
3672         if (bootverbose) {
3673                 if_printf(ifp, "Interrupt moderation set to %d/sec\n",
3674                           sc->int_throttle_ceil);
3675         }
3676         return 0;
3677 }
3678
3679 static int
3680 emx_sysctl_tx_intr_nsegs(SYSCTL_HANDLER_ARGS)
3681 {
3682         struct emx_softc *sc = (void *)arg1;
3683         struct ifnet *ifp = &sc->arpcom.ac_if;
3684         struct emx_txdata *tdata = &sc->tx_data[0];
3685         int error, segs;
3686
3687         segs = tdata->tx_intr_nsegs;
3688         error = sysctl_handle_int(oidp, &segs, 0, req);
3689         if (error || req->newptr == NULL)
3690                 return error;
3691         if (segs <= 0)
3692                 return EINVAL;
3693
3694         ifnet_serialize_all(ifp);
3695
3696         /*
3697          * Don't allow tx_intr_nsegs to become:
3698          * o  Less the oact_tx_desc
3699          * o  Too large that no TX desc will cause TX interrupt to
3700          *    be generated (OACTIVE will never recover)
3701          * o  Too small that will cause tx_dd[] overflow
3702          */
3703         if (segs < tdata->oact_tx_desc ||
3704             segs >= tdata->num_tx_desc - tdata->oact_tx_desc ||
3705             segs < tdata->num_tx_desc / EMX_TXDD_SAFE) {
3706                 error = EINVAL;
3707         } else {
3708                 int i;
3709
3710                 error = 0;
3711                 for (i = 0; i < sc->tx_ring_cnt; ++i)
3712                         sc->tx_data[i].tx_intr_nsegs = segs;
3713         }
3714
3715         ifnet_deserialize_all(ifp);
3716
3717         return error;
3718 }
3719
3720 static int
3721 emx_sysctl_tx_wreg_nsegs(SYSCTL_HANDLER_ARGS)
3722 {
3723         struct emx_softc *sc = (void *)arg1;
3724         struct ifnet *ifp = &sc->arpcom.ac_if;
3725         int error, nsegs, i;
3726
3727         nsegs = sc->tx_data[0].tx_wreg_nsegs;
3728         error = sysctl_handle_int(oidp, &nsegs, 0, req);
3729         if (error || req->newptr == NULL)
3730                 return error;
3731
3732         ifnet_serialize_all(ifp);
3733         for (i = 0; i < sc->tx_ring_cnt; ++i)
3734                 sc->tx_data[i].tx_wreg_nsegs =nsegs;
3735         ifnet_deserialize_all(ifp);
3736
3737         return 0;
3738 }
3739
3740 #ifdef IFPOLL_ENABLE
3741
3742 static int
3743 emx_sysctl_npoll_rxoff(SYSCTL_HANDLER_ARGS)
3744 {
3745         struct emx_softc *sc = (void *)arg1;
3746         struct ifnet *ifp = &sc->arpcom.ac_if;
3747         int error, off;
3748
3749         off = sc->rx_npoll_off;
3750         error = sysctl_handle_int(oidp, &off, 0, req);
3751         if (error || req->newptr == NULL)
3752                 return error;
3753         if (off < 0)
3754                 return EINVAL;
3755
3756         ifnet_serialize_all(ifp);
3757         if (off >= ncpus2 || off % sc->rx_ring_cnt != 0) {
3758                 error = EINVAL;
3759         } else {
3760                 error = 0;
3761                 sc->rx_npoll_off = off;
3762         }
3763         ifnet_deserialize_all(ifp);
3764
3765         return error;
3766 }
3767
3768 static int
3769 emx_sysctl_npoll_txoff(SYSCTL_HANDLER_ARGS)
3770 {
3771         struct emx_softc *sc = (void *)arg1;
3772         struct ifnet *ifp = &sc->arpcom.ac_if;
3773         int error, off;
3774
3775         off = sc->tx_npoll_off;
3776         error = sysctl_handle_int(oidp, &off, 0, req);
3777         if (error || req->newptr == NULL)
3778                 return error;
3779         if (off < 0)
3780                 return EINVAL;
3781
3782         ifnet_serialize_all(ifp);
3783         if (off >= ncpus2 || off % sc->tx_ring_cnt != 0) {
3784                 error = EINVAL;
3785         } else {
3786                 error = 0;
3787                 sc->tx_npoll_off = off;
3788         }
3789         ifnet_deserialize_all(ifp);
3790
3791         return error;
3792 }
3793
3794 #endif  /* IFPOLL_ENABLE */
3795
3796 static int
3797 emx_dma_alloc(struct emx_softc *sc)
3798 {
3799         int error, i;
3800
3801         /*
3802          * Create top level busdma tag
3803          */
3804         error = bus_dma_tag_create(NULL, 1, 0,
3805                         BUS_SPACE_MAXADDR, BUS_SPACE_MAXADDR,
3806                         NULL, NULL,
3807                         BUS_SPACE_MAXSIZE_32BIT, 0, BUS_SPACE_MAXSIZE_32BIT,
3808                         0, &sc->parent_dtag);
3809         if (error) {
3810                 device_printf(sc->dev, "could not create top level DMA tag\n");
3811                 return error;
3812         }
3813
3814         /*
3815          * Allocate transmit descriptors ring and buffers
3816          */
3817         for (i = 0; i < sc->tx_ring_cnt; ++i) {
3818                 error = emx_create_tx_ring(&sc->tx_data[i]);
3819                 if (error) {
3820                         device_printf(sc->dev,
3821                             "Could not setup transmit structures\n");
3822                         return error;
3823                 }
3824         }
3825
3826         /*
3827          * Allocate receive descriptors ring and buffers
3828          */
3829         for (i = 0; i < sc->rx_ring_cnt; ++i) {
3830                 error = emx_create_rx_ring(&sc->rx_data[i]);
3831                 if (error) {
3832                         device_printf(sc->dev,
3833                             "Could not setup receive structures\n");
3834                         return error;
3835                 }
3836         }
3837         return 0;
3838 }
3839
3840 static void
3841 emx_dma_free(struct emx_softc *sc)
3842 {
3843         int i;
3844
3845         for (i = 0; i < sc->tx_ring_cnt; ++i) {
3846                 emx_destroy_tx_ring(&sc->tx_data[i],
3847                     sc->tx_data[i].num_tx_desc);
3848         }
3849
3850         for (i = 0; i < sc->rx_ring_cnt; ++i) {
3851                 emx_destroy_rx_ring(&sc->rx_data[i],
3852                     sc->rx_data[i].num_rx_desc);
3853         }
3854
3855         /* Free top level busdma tag */
3856         if (sc->parent_dtag != NULL)
3857                 bus_dma_tag_destroy(sc->parent_dtag);
3858 }
3859
3860 static void
3861 emx_serialize(struct ifnet *ifp, enum ifnet_serialize slz)
3862 {
3863         struct emx_softc *sc = ifp->if_softc;
3864
3865         ifnet_serialize_array_enter(sc->serializes, EMX_NSERIALIZE,
3866             EMX_TX_SERIALIZE, EMX_RX_SERIALIZE, slz);
3867 }
3868
3869 static void
3870 emx_deserialize(struct ifnet *ifp, enum ifnet_serialize slz)
3871 {
3872         struct emx_softc *sc = ifp->if_softc;
3873
3874         ifnet_serialize_array_exit(sc->serializes, EMX_NSERIALIZE,
3875             EMX_TX_SERIALIZE, EMX_RX_SERIALIZE, slz);
3876 }
3877
3878 static int
3879 emx_tryserialize(struct ifnet *ifp, enum ifnet_serialize slz)
3880 {
3881         struct emx_softc *sc = ifp->if_softc;
3882
3883         return ifnet_serialize_array_try(sc->serializes, EMX_NSERIALIZE,
3884             EMX_TX_SERIALIZE, EMX_RX_SERIALIZE, slz);
3885 }
3886
3887 static void
3888 emx_serialize_skipmain(struct emx_softc *sc)
3889 {
3890         lwkt_serialize_array_enter(sc->serializes, EMX_NSERIALIZE, 1);
3891 }
3892
3893 static void
3894 emx_deserialize_skipmain(struct emx_softc *sc)
3895 {
3896         lwkt_serialize_array_exit(sc->serializes, EMX_NSERIALIZE, 1);
3897 }
3898
3899 #ifdef INVARIANTS
3900
3901 static void
3902 emx_serialize_assert(struct ifnet *ifp, enum ifnet_serialize slz,
3903     boolean_t serialized)
3904 {
3905         struct emx_softc *sc = ifp->if_softc;
3906
3907         ifnet_serialize_array_assert(sc->serializes, EMX_NSERIALIZE,
3908             EMX_TX_SERIALIZE, EMX_RX_SERIALIZE, slz, serialized);
3909 }
3910
3911 #endif  /* INVARIANTS */
3912
3913 #ifdef IFPOLL_ENABLE
3914
3915 static void
3916 emx_npoll_status(struct ifnet *ifp)
3917 {
3918         struct emx_softc *sc = ifp->if_softc;
3919         uint32_t reg_icr;
3920
3921         ASSERT_SERIALIZED(&sc->main_serialize);
3922
3923         reg_icr = E1000_READ_REG(&sc->hw, E1000_ICR);
3924         if (reg_icr & (E1000_ICR_RXSEQ | E1000_ICR_LSC)) {
3925                 callout_stop(&sc->timer);
3926                 sc->hw.mac.get_link_status = 1;
3927                 emx_update_link_status(sc);
3928                 callout_reset(&sc->timer, hz, emx_timer, sc);
3929         }
3930 }
3931
3932 static void
3933 emx_npoll_tx(struct ifnet *ifp, void *arg, int cycle __unused)
3934 {
3935         struct emx_txdata *tdata = arg;
3936
3937         ASSERT_SERIALIZED(&tdata->tx_serialize);
3938
3939         emx_txeof(tdata);
3940         if (!ifsq_is_empty(tdata->ifsq))
3941                 ifsq_devstart(tdata->ifsq);
3942 }
3943
3944 static void
3945 emx_npoll_rx(struct ifnet *ifp __unused, void *arg, int cycle)
3946 {
3947         struct emx_rxdata *rdata = arg;
3948
3949         ASSERT_SERIALIZED(&rdata->rx_serialize);
3950
3951         emx_rxeof(rdata, cycle);
3952 }
3953
3954 static void
3955 emx_npoll(struct ifnet *ifp, struct ifpoll_info *info)
3956 {
3957         struct emx_softc *sc = ifp->if_softc;
3958         int i, txr_cnt;
3959
3960         ASSERT_IFNET_SERIALIZED_ALL(ifp);
3961
3962         if (info) {
3963                 int off;
3964
3965                 info->ifpi_status.status_func = emx_npoll_status;
3966                 info->ifpi_status.serializer = &sc->main_serialize;
3967
3968                 txr_cnt = emx_get_txring_inuse(sc, TRUE);
3969                 off = sc->tx_npoll_off;
3970                 for (i = 0; i < txr_cnt; ++i) {
3971                         struct emx_txdata *tdata = &sc->tx_data[i];
3972                         int idx = i + off;
3973
3974                         KKASSERT(idx < ncpus2);
3975                         info->ifpi_tx[idx].poll_func = emx_npoll_tx;
3976                         info->ifpi_tx[idx].arg = tdata;
3977                         info->ifpi_tx[idx].serializer = &tdata->tx_serialize;
3978                         ifsq_set_cpuid(tdata->ifsq, idx);
3979                 }
3980
3981                 off = sc->rx_npoll_off;
3982                 for (i = 0; i < sc->rx_ring_cnt; ++i) {
3983                         struct emx_rxdata *rdata = &sc->rx_data[i];
3984                         int idx = i + off;
3985
3986                         KKASSERT(idx < ncpus2);
3987                         info->ifpi_rx[idx].poll_func = emx_npoll_rx;
3988                         info->ifpi_rx[idx].arg = rdata;
3989                         info->ifpi_rx[idx].serializer = &rdata->rx_serialize;
3990                 }
3991
3992                 if (ifp->if_flags & IFF_RUNNING) {
3993                         if (txr_cnt == sc->tx_ring_inuse)
3994                                 emx_disable_intr(sc);
3995                         else
3996                                 emx_init(sc);
3997                 }
3998         } else {
3999                 for (i = 0; i < sc->tx_ring_cnt; ++i) {
4000                         struct emx_txdata *tdata = &sc->tx_data[i];
4001
4002                         ifsq_set_cpuid(tdata->ifsq,
4003                             rman_get_cpuid(sc->intr_res));
4004                 }
4005
4006                 if (ifp->if_flags & IFF_RUNNING) {
4007                         txr_cnt = emx_get_txring_inuse(sc, FALSE);
4008                         if (txr_cnt == sc->tx_ring_inuse)
4009                                 emx_enable_intr(sc);
4010                         else
4011                                 emx_init(sc);
4012                 }
4013         }
4014 }
4015
4016 #endif  /* IFPOLL_ENABLE */
4017
4018 static void
4019 emx_set_itr(struct emx_softc *sc, uint32_t itr)
4020 {
4021         E1000_WRITE_REG(&sc->hw, E1000_ITR, itr);
4022         if (sc->hw.mac.type == e1000_82574) {
4023                 int i;
4024
4025                 /*
4026                  * When using MSIX interrupts we need to
4027                  * throttle using the EITR register
4028                  */
4029                 for (i = 0; i < 4; ++i)
4030                         E1000_WRITE_REG(&sc->hw, E1000_EITR_82574(i), itr);
4031         }
4032 }
4033
4034 /*
4035  * Disable the L0s, 82574L Errata #20
4036  */
4037 static void
4038 emx_disable_aspm(struct emx_softc *sc)
4039 {
4040         uint16_t link_cap, link_ctrl, disable;
4041         uint8_t pcie_ptr, reg;
4042         device_t dev = sc->dev;
4043
4044         switch (sc->hw.mac.type) {
4045         case e1000_82571:
4046         case e1000_82572:
4047         case e1000_82573:
4048                 /*
4049                  * 82573 specification update
4050                  * errata #8 disable L0s
4051                  * errata #41 disable L1
4052                  *
4053                  * 82571/82572 specification update
4054                  # errata #13 disable L1
4055                  * errata #68 disable L0s
4056                  */
4057                 disable = PCIEM_LNKCTL_ASPM_L0S | PCIEM_LNKCTL_ASPM_L1;
4058                 break;
4059
4060         case e1000_82574:
4061                 /*
4062                  * 82574 specification update errata #20
4063                  *
4064                  * There is no need to disable L1
4065                  */
4066                 disable = PCIEM_LNKCTL_ASPM_L0S;
4067                 break;
4068
4069         default:
4070                 return;
4071         }
4072
4073         pcie_ptr = pci_get_pciecap_ptr(dev);
4074         if (pcie_ptr == 0)
4075                 return;
4076
4077         link_cap = pci_read_config(dev, pcie_ptr + PCIER_LINKCAP, 2);
4078         if ((link_cap & PCIEM_LNKCAP_ASPM_MASK) == 0)
4079                 return;
4080
4081         if (bootverbose)
4082                 if_printf(&sc->arpcom.ac_if, "disable ASPM %#02x\n", disable);
4083
4084         reg = pcie_ptr + PCIER_LINKCTRL;
4085         link_ctrl = pci_read_config(dev, reg, 2);
4086         link_ctrl &= ~disable;
4087         pci_write_config(dev, reg, link_ctrl, 2);
4088 }
4089
4090 static int
4091 emx_tso_pullup(struct emx_txdata *tdata, struct mbuf **mp)
4092 {
4093         int iphlen, hoff, thoff, ex = 0;
4094         struct mbuf *m;
4095         struct ip *ip;
4096
4097         m = *mp;
4098         KASSERT(M_WRITABLE(m), ("TSO mbuf not writable"));
4099
4100         iphlen = m->m_pkthdr.csum_iphlen;
4101         thoff = m->m_pkthdr.csum_thlen;
4102         hoff = m->m_pkthdr.csum_lhlen;
4103
4104         KASSERT(iphlen > 0, ("invalid ip hlen"));
4105         KASSERT(thoff > 0, ("invalid tcp hlen"));
4106         KASSERT(hoff > 0, ("invalid ether hlen"));
4107
4108         if (tdata->tx_flags & EMX_TXFLAG_TSO_PULLEX)
4109                 ex = 4;
4110
4111         if (m->m_len < hoff + iphlen + thoff + ex) {
4112                 m = m_pullup(m, hoff + iphlen + thoff + ex);
4113                 if (m == NULL) {
4114                         *mp = NULL;
4115                         return ENOBUFS;
4116                 }
4117                 *mp = m;
4118         }
4119         ip = mtodoff(m, struct ip *, hoff);
4120         ip->ip_len = 0;
4121
4122         return 0;
4123 }
4124
4125 static int
4126 emx_tso_setup(struct emx_txdata *tdata, struct mbuf *mp,
4127     uint32_t *txd_upper, uint32_t *txd_lower)
4128 {
4129         struct e1000_context_desc *TXD;
4130         int hoff, iphlen, thoff, hlen;
4131         int mss, pktlen, curr_txd;
4132
4133 #ifdef EMX_TSO_DEBUG
4134         tdata->tso_segments++;
4135 #endif
4136
4137         iphlen = mp->m_pkthdr.csum_iphlen;
4138         thoff = mp->m_pkthdr.csum_thlen;
4139         hoff = mp->m_pkthdr.csum_lhlen;
4140         mss = mp->m_pkthdr.tso_segsz;
4141         pktlen = mp->m_pkthdr.len;
4142
4143         if ((tdata->tx_flags & EMX_TXFLAG_FORCECTX) == 0 &&
4144             tdata->csum_flags == CSUM_TSO &&
4145             tdata->csum_iphlen == iphlen &&
4146             tdata->csum_lhlen == hoff &&
4147             tdata->csum_thlen == thoff &&
4148             tdata->csum_mss == mss &&
4149             tdata->csum_pktlen == pktlen) {
4150                 *txd_upper = tdata->csum_txd_upper;
4151                 *txd_lower = tdata->csum_txd_lower;
4152 #ifdef EMX_TSO_DEBUG
4153                 tdata->tso_ctx_reused++;
4154 #endif
4155                 return 0;
4156         }
4157         hlen = hoff + iphlen + thoff;
4158
4159         /*
4160          * Setup a new TSO context.
4161          */
4162
4163         curr_txd = tdata->next_avail_tx_desc;
4164         TXD = (struct e1000_context_desc *)&tdata->tx_desc_base[curr_txd];
4165
4166         *txd_lower = E1000_TXD_CMD_DEXT |       /* Extended descr type */
4167                      E1000_TXD_DTYP_D |         /* Data descr type */
4168                      E1000_TXD_CMD_TSE;         /* Do TSE on this packet */
4169
4170         /* IP and/or TCP header checksum calculation and insertion. */
4171         *txd_upper = (E1000_TXD_POPTS_IXSM | E1000_TXD_POPTS_TXSM) << 8;
4172
4173         /*
4174          * Start offset for header checksum calculation.
4175          * End offset for header checksum calculation.
4176          * Offset of place put the checksum.
4177          */
4178         TXD->lower_setup.ip_fields.ipcss = hoff;
4179         TXD->lower_setup.ip_fields.ipcse = htole16(hoff + iphlen - 1);
4180         TXD->lower_setup.ip_fields.ipcso = hoff + offsetof(struct ip, ip_sum);
4181
4182         /*
4183          * Start offset for payload checksum calculation.
4184          * End offset for payload checksum calculation.
4185          * Offset of place to put the checksum.
4186          */
4187         TXD->upper_setup.tcp_fields.tucss = hoff + iphlen;
4188         TXD->upper_setup.tcp_fields.tucse = 0;
4189         TXD->upper_setup.tcp_fields.tucso =
4190             hoff + iphlen + offsetof(struct tcphdr, th_sum);
4191
4192         /*
4193          * Payload size per packet w/o any headers.
4194          * Length of all headers up to payload.
4195          */
4196         TXD->tcp_seg_setup.fields.mss = htole16(mss);
4197         TXD->tcp_seg_setup.fields.hdr_len = hlen;
4198         TXD->cmd_and_length = htole32(E1000_TXD_CMD_IFCS |
4199                                 E1000_TXD_CMD_DEXT |    /* Extended descr */
4200                                 E1000_TXD_CMD_TSE |     /* TSE context */
4201                                 E1000_TXD_CMD_IP |      /* Do IP csum */
4202                                 E1000_TXD_CMD_TCP |     /* Do TCP checksum */
4203                                 (pktlen - hlen));       /* Total len */
4204
4205         /* Save the information for this TSO context */
4206         tdata->csum_flags = CSUM_TSO;
4207         tdata->csum_lhlen = hoff;
4208         tdata->csum_iphlen = iphlen;
4209         tdata->csum_thlen = thoff;
4210         tdata->csum_mss = mss;
4211         tdata->csum_pktlen = pktlen;
4212         tdata->csum_txd_upper = *txd_upper;
4213         tdata->csum_txd_lower = *txd_lower;
4214
4215         if (++curr_txd == tdata->num_tx_desc)
4216                 curr_txd = 0;
4217
4218         KKASSERT(tdata->num_tx_desc_avail > 0);
4219         tdata->num_tx_desc_avail--;
4220
4221         tdata->next_avail_tx_desc = curr_txd;
4222         return 1;
4223 }
4224
4225 static int
4226 emx_get_txring_inuse(const struct emx_softc *sc, boolean_t polling)
4227 {
4228         if (polling)
4229                 return sc->tx_ring_cnt;
4230         else
4231                 return 1;
4232 }