2 # GENERIC -- Generic kernel configuration file for DragonFly/i386
4 # Check the LINT configuration file in sys/config, for an
5 # exhaustive list of options.
16 makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols
18 options MATH_EMULATE #Support for x87 emulation
19 options INET #InterNETworking
20 options INET6 #IPv6 communications protocols
21 options HAMMER #Hammer Filesystem
22 options NULLFS #NULL filesystem
23 options FFS #Berkeley Fast Filesystem
24 options FFS_ROOT #FFS usable as root device [keep this!]
25 options SOFTUPDATES #Enable FFS soft updates support
26 options UFS_DIRHASH #Improve performance on big directories
27 options MFS #Memory Filesystem
28 options TMPFS #Temporary Filesystem
29 options MD_ROOT #MD is a potential root device
30 options NFS #Network Filesystem
31 options NFS_ROOT #NFS usable as root device, NFS required
32 options MSDOSFS #MSDOS Filesystem
33 options CD9660 #ISO 9660 Filesystem
34 options PROCFS #Process filesystem
35 #options COMPAT_43 #Compatible with BSD 4.3
36 options COMPAT_DF12 #Compatible with DragonFly up to 1.2
37 options SCSI_DELAY=5000 #Delay (in ms) before probing SCSI
38 options DEVICE_POLLING # Support mixed interrupt-polling
39 # handling of network device drivers
40 options UCONSOLE #Allow users to grab the console
41 options USERCONFIG #boot -c editor
42 options VISUAL_USERCONFIG #visual boot -c editor
43 options KTRACE #ktrace(1) support
44 options SYSVSHM #SYSV-style shared memory
45 options SYSVMSG #SYSV-style message queues
46 options SYSVSEM #SYSV-style semaphores
47 options P1003_1B #Posix P1003_1B real-time extensions
48 options _KPOSIX_PRIORITY_SCHEDULING
49 options ICMP_BANDLIM #Rate limit bad replies
50 options KBD_INSTALL_CDEV # install a CDEV entry in /dev
51 options AHC_REG_PRETTY_PRINT # Print register bitfields in debug
52 # output. Adds ~128k to driver.
53 options AHD_REG_PRETTY_PRINT # Print register bitfields in debug
54 # output. Adds ~215k to driver.
55 options DSCHED_FQ # Fair-queuing disk scheduler
58 options ALTQ #alternate queueing
59 options ALTQ_CBQ #class based queueing
60 options ALTQ_RED #random early detection
61 options ALTQ_RIO #triple red for diffserv (needs RED)
62 options ALTQ_HFSC #hierarchical fair service curve
63 options ALTQ_PRIQ #priority queue
64 options ALTQ_FAIRQ #fair queueing
65 #options ALTQ_NOPCC #don't use processor cycle counter
66 #options ALTQ_DEBUG #for debugging
68 # Kernels configured with 'options SMP' should generally boot on both
71 options SMP # Symmetric MultiProcessor Kernel
73 # Debugging for Development
82 device fdc0 at isa? port IO_FD1 irq 6 drq 2
83 device fd0 at fdc0 drive 0
84 device fd1 at fdc0 drive 1
86 # If you have a Toshiba Libretto with its Y-E Data PCMCIA floppy,
87 # don't use the above line for fdc0 but the following one:
90 # AHCI driver, this will override NATA for AHCI devices,
91 # both drivers may be included.
99 # NEW-ATA (NATA) and ATAPI devices
102 device natadisk # ATA disk drives
103 device natapicd # ATAPI CDROM drives
104 device natapifd # ATAPI floppy drives
105 device natapist # ATAPI tape drives
106 device natapicam # Emulate ATAPI devices as SCSI
107 device nataraid # support for ATA software RAID
109 device natausb # ATA-over-USB support
110 options ATA_STATIC_ID # Static device numbering
113 device ahc # AHA2940 and onboard AIC7xxx devices
114 device ahd # AHA39320/29320 and onboard AIC79xx devices
115 device amd # AMD 53C974 (Tekram DC-390(T))
116 device isp # Qlogic family
117 #device ispfw # Firmware for QLogic HBAs- normally a module
118 device mpt # LSI-Logic MPT/Fusion
119 device mps # LSI-Logic MPT-Fusion 2
120 device ncr # NCR/Symbios Logic
121 device sym # NCR/Symbios Logic (newer chipsets)
122 options SYM_SETUP_LP_PROBE_MAP=0x40
123 # Allow ncr to attach legacy NCR devices when
124 # both sym and ncr are configured
131 device ncv # NCR 53C500
132 device nsp # Workbit Ninja SCSI-3
133 device stg # TMC 18C30/18C50
136 device scbus # SCSI bus (required)
137 device da # Direct Access (disks)
138 device sa # Sequential Access (tape etc)
140 device pass # Passthrough device (direct SCSI access)
141 device sg # Passthrough device (linux scsi generic)
143 # RAID controllers interfaced to the SCSI subsystem
144 device arcmsr # Areca SATA II RAID
145 device asr # DPT SmartRAID V, VI and Adaptec SCSI RAID
146 device ciss # Compaq SmartRAID 5* series
147 device dpt # DPT Smartcache - See LINT for options!
148 device "hpt27xx" # Highpoint RocketRAID 27xx series
149 device hptiop # Highpoint RocketRAID 3xxx series
150 device hptmv # Highpoint RocketRAID 182x
151 device hptrr # Highpoint RocketRAID 17xx, 22xx, 23xx, 25xx
152 device iir # Intel Integrated RAID
153 device mly # Mylex AcceleRAID/eXtremeRAID
154 device twa # 3ware 9000 series PATA/SATA RAID
155 device tws # 3ware 9750 series SATA/SAS RAID
158 device aac # Adaptec FSA RAID, Dell PERC2/PERC3
159 device aacp # SCSI passthrough for aac (requires CAM)
160 device amr # AMI MegaRAID
161 device amrp # SCSI Passthrough interface (optional, CAM req.)
162 device ida # Compaq Smart RAID
163 device ips # IBM ServeRAID
164 device mlx # Mylex DAC960 family
165 device mfi # LSI MegaRAID SAS
166 device mfip # LSI MegaRAID SAS passthrough, requires CAM
167 device pst # Promise Supertrack
168 device twe # 3ware Escalade 7000/8000's
170 # atkbdc0 controls both the keyboard and the PS/2 mouse
171 device atkbdc0 at isa? port IO_KBD
172 device atkbd0 at atkbdc? irq 1 flags 0x1
173 device psm0 at atkbdc? irq 12
177 # kbdmux is the keyboard multiplexer
180 # splash screen/screen saver
183 # syscons is the default console driver, resembling an SCO console
184 device sc0 at isa? flags 0x100
185 options SC_PIXEL_MODE # add support for the raster text mode
187 device agp # support several AGP chipsets
189 # Floating point support - do not disable.
190 device npx0 at nexus? port IO_NPX irq 13
192 # Power management support (see LINT for more options)
193 device apm0 at nexus? disable flags 0x20 # Advanced Power Management
195 # HW monitoring devices
196 #device aps0 at isa? port 0x1600
197 device lm0 at isa? port 0x290
198 device it0 at isa? port 0x290
199 device it1 at isa? port 0xc00
200 device it2 at isa? port 0xd00
201 device it3 at isa? port 0x228
202 device wbsio0 at isa? port 0x2e
203 device wbsio1 at isa? port 0x4e
204 device lm#3 at wbsio?
206 # PCCARD (PCMCIA) support
212 device sio0 at isa? port IO_COM1 flags 0x10 irq 4
213 device sio1 at isa? port IO_COM2 irq 3
214 device sio2 at isa? disable port IO_COM3 irq 5
215 device sio3 at isa? disable port IO_COM4 irq 9
218 device ppc0 at isa? irq 7
219 device ppbus # Parallel port bus (required)
221 device plip # TCP/IP over parallel
222 device ppi # Parallel port interface device
223 #device vpo # Requires scbus and da
226 device de # DEC/Intel DC21x4x (``Tulip'')
227 device txp # 3Com 3cR990 (``Typhoon'')
228 device vx # 3Com 3c590, 3c595 (``Vortex'')
230 device em # Intel PRO/1000 adapter Gigabit Ethernet Card (``Wiseman'')
232 device igb # Intel Pro/1000 (82575, 82576, 82580, i350)
234 device ig_hal # Intel PRO/1000 hardware abstraction layer
235 device ixgbe # Intel PRO/10GbE PCIE Ethernet Family
237 # PCI Ethernet NICs that use the common MII bus controller code.
238 # NOTE: Be sure to keep the 'device miibus' line in order to use these NICs!
239 device miibus # MII bus support
240 device ae # Attansic/Atheros L2 Fast Ethernet
241 device age # Attansic/Atheros L1 Gigabit Ethernet
242 device alc # Atheros AR8131/AR8132
243 device ale # Atheros AR8121/AR8113/AR8114
244 device bce # Broadcom NetXtreme II Gigabit Ethernet
245 device bfe # Broadcom BCM440x 10/100 Ethernet
246 device bnx # Broadcom NetXtreme 5718/57785 Gigabit Ethernet
247 device dc # DEC/Intel 21143 and various workalikes
248 device et # Agere ET1310 10/100/1000 Ethernet
249 device fxp # Intel EtherExpress PRO/100B (82557, 82558)
250 device jme # JMicron Gigabit/Fast Ethernet
251 device pcn # AMD Am79C97x PCI 10/100 NICs
252 device rl # RealTek 8129/8139
253 device re # RealTek 8139C+/8169
254 device sf # Adaptec AIC-6915 (``Starfire'')
255 device sis # Silicon Integrated Systems SiS 900/SiS 7016
256 device sk # SysKonnect GEnesis, LinkSys EG1023, D-Link
257 device ste # Sundance ST201 (D-Link DFE-550TX)
258 device tl # Texas Instruments ThunderLAN
259 device tx # SMC EtherPower II (83c170 ``EPIC'')
260 device vge # VIA 612x GigE
261 device vr # VIA Rhine, Rhine II
262 device wb # Winbond W89C840F
263 device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'')
264 device bge # Broadcom BCM570x (``Tigon III'')
265 device stge # Sundance/Tamarack TC9021 Gigabit Ethernet
266 device msk # Marvell/SysKonnect Yukon II Gigabit Ethernet
267 device nfe # NVIDIA nForce MCP 10/100/Gigabit Ethernet
270 # 'device ed' requires 'device miibus'
271 device ed0 at isa? disable port 0x280 irq 10 iomem 0xd8000
274 device fe0 at isa? disable port 0x300
279 options IEEE80211_DEBUG #enable debugging msgs
280 options IEEE80211_SUPPORT_MESH #enable 802.11s D3.0 support
281 options IEEE80211_SUPPORT_TDMA #enable TDMA support
282 device wlan # 802.11 support
283 device wlan_ccmp # 802.11 CCMP support
284 device wlan_tkip # 802.11 TKIP support
285 device wlan_wep # 802.11 WEP support
286 #device wlan_amrr # AMRR
288 # All wireless NICs require wlan and wlan_amrr
289 # Aironet 4500/4800 802.11 wireless NICs. Note: the declaration below will
290 # work for PCMCIA and PCI cards, as well as ISA cards set to ISA PnP
291 # mode (the factory default). If you set the switches on your ISA
292 # card for a manually chosen I/O address and IRQ, you must specify
293 # those parameters here.
295 device ral # Ralink Technology 802.11 wireless NIC
296 #device rtw # RealTek 802.11 wireless NIC
297 # WaveLAN/IEEE 802.11 wireless NICs. Note: the WaveLAN/IEEE really
298 # exists only as a PCMCIA device, so there is no ISA attachment needed
299 # and resources will always be dynamically assigned by the pccard code.
302 # The probe order of these is presently determined by i386/isa/isa_compat.c.
303 device lnc0 at isa? disable port 0x280 irq 10 drq 0
304 device cs0 at isa? disable port 0x300
305 device sn0 at isa? disable port 0x300 irq 10
307 # Pseudo devices - the number indicates how many units to allocate.
308 pseudo-device loop # Network loopback
309 pseudo-device ether # Ethernet support
310 pseudo-device sl 1 # Kernel SLIP
311 pseudo-device ppp 1 # Kernel PPP
312 pseudo-device tun # Packet tunnel.
313 pseudo-device pty # Pseudo-ttys (telnet etc)
314 pseudo-device md # Memory "disks"
315 pseudo-device gif # IPv6 and IPv4 tunneling
316 pseudo-device faith 1 # IPv6-to-IPv4 relaying (translation)
318 # The `bpf' pseudo-device enables the Berkeley Packet Filter.
319 # Be aware of the administrative consequences of enabling this!
320 pseudo-device bpf #Berkeley packet filter
322 pseudo-device crypto # core crypto support, used by wlan
323 pseudo-device cryptodev
326 device uhci # UHCI PCI->USB interface
327 device ohci # OHCI PCI->USB interface
328 device usb # USB Bus (required)
329 device ugen # Generic
330 device uhid # "Human Interface Devices"
331 device ukbd # Keyboard
332 device ulpt # Printer
333 device umass # Disks/Mass storage - Requires scbus and da
335 device uscanner # Scanners
336 device urio # Diamond Rio MP3 Player
337 # USB Ethernet, requires mii
338 device aue # ADMtek USB ethernet
339 device axe # ASIX Electronics USB Ethernet
340 device cue # CATC USB ethernet
341 device kue # Kawasaki LSI USB ethernet
342 device rue # RealTek 8150 based USB ethernet
343 # USB wireless NICs, requires wlan, wlan_amrr
344 #device rum # Ralink Technology RT2501USB/RT2601USB
345 #device ural # Ralink Technology RT2500USB
348 device firewire # FireWire bus code
349 device sbp # SCSI over FireWire (Requires scbus and da)
350 device fwe # Ethernet over FireWire (non-standard!)
projects / dragonfly.git / blob