sys/dev/disk/mpt/mpilib/mpi_cnfg.h

   1 /* $FreeBSD: head/sys/dev/mpt/mpilib/mpi_cnfg.h 233425 2012-03-24 16:23:21Z marius $ */
   2 /*-
   3  * Copyright (c) 2000-2010, LSI Logic Corporation and its contributors.
   4  * All rights reserved.
   5  *
   6  * Redistribution and use in source and binary forms, with or without
   7  * modification, are permitted provided that the following conditions are
   8  * met:
   9  * 1. Redistributions of source code must retain the above copyright
  10  *    notice, this list of conditions and the following disclaimer.
  11  * 2. Redistributions in binary form must reproduce at minimum a disclaimer
  12  *    substantially similar to the "NO WARRANTY" disclaimer below
  13  *    ("Disclaimer") and any redistribution must be conditioned upon including
  14  *    a substantially similar Disclaimer requirement for further binary
  15  *    redistribution.
  16  * 3. Neither the name of the LSI Logic Corporation nor the names of its
  17  *    contributors may be used to endorse or promote products derived from
  18  *    this software without specific prior written permission.
  19  *
  20  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
  21  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
  22  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
  23  * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
  24  * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
  25  * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
  26  * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
  27  * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
  28  * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
  29  * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF THE COPYRIGHT
  30  * OWNER OR CONTRIBUTOR IS ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  31  *
  32  *           Name:  mpi_cnfg.h
  33  *          Title:  MPI Config message, structures, and Pages
  34  *  Creation Date:  July 27, 2000
  35  *
  36  *    mpi_cnfg.h Version:  01.05.19
  37  *
  38  *  Version History
  39  *  ---------------
  40  *
  41  *  Date      Version   Description
  42  *  --------  --------  ------------------------------------------------------
  43  *  05-08-00  00.10.01  Original release for 0.10 spec dated 4/26/2000.
  44  *  06-06-00  01.00.01  Update version number for 1.0 release.
  45  *  06-08-00  01.00.02  Added _PAGEVERSION definitions for all pages.
  46  *                      Added FcPhLowestVersion, FcPhHighestVersion, Reserved2
  47  *                      fields to FC_DEVICE_0 page, updated the page version.
  48  *                      Changed _FREE_RUNNING_CLOCK to _PACING_TRANSFERS in
  49  *                      SCSI_PORT_0, SCSI_DEVICE_0 and SCSI_DEVICE_1 pages
  50  *                      and updated the page versions.
  51  *                      Added _RESPONSE_ID_MASK definition to SCSI_PORT_1
  52  *                      page and updated the page version.
  53  *                      Added Information field and _INFO_PARAMS_NEGOTIATED
  54  *                      definitionto SCSI_DEVICE_0 page.
  55  *  06-22-00  01.00.03  Removed batch controls from LAN_0 page and updated the
  56  *                      page version.
  57  *                      Added BucketsRemaining to LAN_1 page, redefined the
  58  *                      state values, and updated the page version.
  59  *                      Revised bus width definitions in SCSI_PORT_0,
  60  *                      SCSI_DEVICE_0 and SCSI_DEVICE_1 pages.
  61  *  06-30-00  01.00.04  Added MaxReplySize to LAN_1 page and updated the page
  62  *                      version.
  63  *                      Moved FC_DEVICE_0 PageAddress description to spec.
  64  *  07-27-00  01.00.05  Corrected the SubsystemVendorID and SubsystemID field
  65  *                      widths in IOC_0 page and updated the page version.
  66  *  11-02-00  01.01.01  Original release for post 1.0 work
  67  *                      Added Manufacturing pages, IO Unit Page 2, SCSI SPI
  68  *                      Port Page 2, FC Port Page 4, FC Port Page 5
  69  *  11-15-00  01.01.02  Interim changes to match proposals
  70  *  12-04-00  01.01.03  Config page changes to match MPI rev 1.00.01.
  71  *  12-05-00  01.01.04  Modified config page actions.
  72  *  01-09-01  01.01.05  Added defines for page address formats.
  73  *                      Data size for Manufacturing pages 2 and 3 no longer
  74  *                      defined here.
  75  *                      Io Unit Page 2 size is fixed at 4 adapters and some
  76  *                      flags were changed.
  77  *                      SCSI Port Page 2 Device Settings modified.
  78  *                      New fields added to FC Port Page 0 and some flags
  79  *                      cleaned up.
  80  *                      Removed impedance flash from FC Port Page 1.
  81  *                      Added FC Port pages 6 and 7.
  82  *  01-25-01  01.01.06  Added MaxInitiators field to FcPortPage0.
  83  *  01-29-01  01.01.07  Changed some defines to make them 32 character unique.
  84  *                      Added some LinkType defines for FcPortPage0.
  85  *  02-20-01  01.01.08  Started using MPI_POINTER.
  86  *  02-27-01  01.01.09  Replaced MPI_CONFIG_PAGETYPE_SCSI_LUN with
  87  *                      MPI_CONFIG_PAGETYPE_RAID_VOLUME.
  88  *                      Added definitions and structures for IOC Page 2 and
  89  *                      RAID Volume Page 2.
  90  *  03-27-01  01.01.10  Added CONFIG_PAGE_FC_PORT_8 and CONFIG_PAGE_FC_PORT_9.
  91  *                      CONFIG_PAGE_FC_PORT_3 now supports persistent by DID.
  92  *                      Added VendorId and ProductRevLevel fields to
  93  *                      RAIDVOL2_IM_PHYS_ID struct.
  94  *                      Modified values for MPI_FCPORTPAGE0_FLAGS_ATTACH_
  95  *                      defines to make them compatible to MPI version 1.0.
  96  *                      Added structure offset comments.
  97  *  04-09-01  01.01.11  Added some new defines for the PageAddress field and
  98  *                      removed some obsolete ones.
  99  *                      Added IO Unit Page 3.
 100  *                      Modified defines for Scsi Port Page 2.
 101  *                      Modified RAID Volume Pages.
 102  *  08-08-01  01.02.01  Original release for v1.2 work.
 103  *                      Added SepID and SepBus to RVP2 IMPhysicalDisk struct.
 104  *                      Added defines for the SEP bits in RVP2 VolumeSettings.
 105  *                      Modified the DeviceSettings field in RVP2 to use the
 106  *                      proper structure.
 107  *                      Added defines for SES, SAF-TE, and cross channel for
 108  *                      IOCPage2 CapabilitiesFlags.
 109  *                      Removed define for MPI_IOUNITPAGE2_FLAGS_RAID_DISABLE.
 110  *                      Removed define for
 111  *                      MPI_SCSIPORTPAGE2_PORT_FLAGS_PARITY_ENABLE.
 112  *                      Added define for MPI_CONFIG_PAGEATTR_RO_PERSISTENT.
 113  *  08-29-01 01.02.02   Fixed value for MPI_MANUFACTPAGE_DEVID_53C1035.
 114  *                      Added defines for MPI_FCPORTPAGE1_FLAGS_HARD_ALPA_ONLY
 115  *                      and MPI_FCPORTPAGE1_FLAGS_IMMEDIATE_ERROR_REPLY.
 116  *                      Removed MPI_SCSIPORTPAGE0_CAP_PACING_TRANSFERS,
 117  *                      MPI_SCSIDEVPAGE0_NP_PACING_TRANSFERS, and
 118  *                      MPI_SCSIDEVPAGE1_RP_PACING_TRANSFERS, and
 119  *                      MPI_SCSIDEVPAGE1_CONF_PPR_ALLOWED.
 120  *                      Added defines for MPI_SCSIDEVPAGE1_CONF_WDTR_DISALLOWED
 121  *                      and MPI_SCSIDEVPAGE1_CONF_SDTR_DISALLOWED.
 122  *                      Added OnBusTimerValue to CONFIG_PAGE_SCSI_PORT_1.
 123  *                      Added rejected bits to SCSI Device Page 0 Information.
 124  *                      Increased size of ALPA array in FC Port Page 2 by one
 125  *                      and removed a one byte reserved field.
 126  *  09-28-01 01.02.03   Swapped NegWireSpeedLow and NegWireSpeedLow in
 127  *                      CONFIG_PAGE_LAN_1 to match preferred 64-bit ordering.
 128  *                      Added structures for Manufacturing Page 4, IO Unit
 129  *                      Page 3, IOC Page 3, IOC Page 4, RAID Volume Page 0, and
 130  *                      RAID PhysDisk Page 0.
 131  *  10-04-01 01.02.04   Added define for MPI_CONFIG_PAGETYPE_RAID_PHYSDISK.
 132  *                      Modified some of the new defines to make them 32
 133  *                      character unique.
 134  *                      Modified how variable length pages (arrays) are defined.
 135  *                      Added generic defines for hot spare pools and RAID
 136  *                      volume types.
 137  *  11-01-01 01.02.05   Added define for MPI_IOUNITPAGE1_DISABLE_IR.
 138  *  03-14-02 01.02.06   Added PCISlotNum field to CONFIG_PAGE_IOC_1 along with
 139  *                      related define, and bumped the page version define.
 140  *  05-31-02 01.02.07   Added a Flags field to CONFIG_PAGE_IOC_2_RAID_VOL in a
 141  *                      reserved byte and added a define.
 142  *                      Added define for
 143  *                      MPI_RAIDVOL0_STATUS_FLAG_VOLUME_INACTIVE.
 144  *                      Added new config page: CONFIG_PAGE_IOC_5.
 145  *                      Added MaxAliases, MaxHardAliases, and NumCurrentAliases
 146  *                      fields to CONFIG_PAGE_FC_PORT_0.
 147  *                      Added AltConnector and NumRequestedAliases fields to
 148  *                      CONFIG_PAGE_FC_PORT_1.
 149  *                      Added new config page: CONFIG_PAGE_FC_PORT_10.
 150  *  07-12-02 01.02.08   Added more MPI_MANUFACTPAGE_DEVID_ defines.
 151  *                      Added additional MPI_SCSIDEVPAGE0_NP_ defines.
 152  *                      Added more MPI_SCSIDEVPAGE1_RP_ defines.
 153  *                      Added define for
 154  *                      MPI_SCSIDEVPAGE1_CONF_EXTENDED_PARAMS_ENABLE.
 155  *                      Added new config page: CONFIG_PAGE_SCSI_DEVICE_3.
 156  *                      Modified MPI_FCPORTPAGE5_FLAGS_ defines.
 157  *  09-16-02 01.02.09   Added MPI_SCSIDEVPAGE1_CONF_FORCE_PPR_MSG define.
 158  *  11-15-02 01.02.10   Added ConnectedID defines for CONFIG_PAGE_SCSI_PORT_0.
 159  *                      Added more Flags defines for CONFIG_PAGE_FC_PORT_1.
 160  *                      Added more Flags defines for CONFIG_PAGE_FC_DEVICE_0.
 161  *  04-01-03 01.02.11   Added RR_TOV field and additional Flags defines for
 162  *                      CONFIG_PAGE_FC_PORT_1.
 163  *                      Added define MPI_FCPORTPAGE5_FLAGS_DISABLE to disable
 164  *                      an alias.
 165  *                      Added more device id defines.
 166  *  06-26-03 01.02.12   Added MPI_IOUNITPAGE1_IR_USE_STATIC_VOLUME_ID define.
 167  *                      Added TargetConfig and IDConfig fields to
 168  *                      CONFIG_PAGE_SCSI_PORT_1.
 169  *                      Added more PortFlags defines for CONFIG_PAGE_SCSI_PORT_2
 170  *                      to control DV.
 171  *                      Added more Flags defines for CONFIG_PAGE_FC_PORT_1.
 172  *                      In CONFIG_PAGE_FC_DEVICE_0, replaced Reserved1 field
 173  *                      with ADISCHardALPA.
 174  *                      Added MPI_FC_DEVICE_PAGE0_PROT_FCP_RETRY define.
 175  *  01-16-04 01.02.13   Added InitiatorDeviceTimeout and InitiatorIoPendTimeout
 176  *                      fields and related defines to CONFIG_PAGE_FC_PORT_1.
 177  *                      Added define for
 178  *                      MPI_FCPORTPAGE1_FLAGS_SOFT_ALPA_FALLBACK.
 179  *                      Added new fields to the substructures of
 180  *                      CONFIG_PAGE_FC_PORT_10.
 181  *  04-29-04 01.02.14   Added define for IDP bit for CONFIG_PAGE_SCSI_PORT_0,
 182  *                      CONFIG_PAGE_SCSI_DEVICE_0, and
 183  *                      CONFIG_PAGE_SCSI_DEVICE_1. Also bumped Page Version for
 184  *                      these pages.
 185  *  05-11-04 01.03.01   Added structure for CONFIG_PAGE_INBAND_0.
 186  *  08-19-04 01.05.01   Modified MSG_CONFIG request to support extended config
 187  *                      pages.
 188  *                      Added a new structure for extended config page header.
 189  *                      Added new extended config pages types and structures for
 190  *                      SAS IO Unit, SAS Expander, SAS Device, and SAS PHY.
 191  *                      Replaced a reserved byte in CONFIG_PAGE_MANUFACTURING_4
 192  *                      to add a Flags field.
 193  *                      Two new Manufacturing config pages (5 and 6).
 194  *                      Two new bits defined for IO Unit Page 1 Flags field.
 195  *                      Modified CONFIG_PAGE_IO_UNIT_2 to add three new fields
 196  *                      to specify the BIOS boot device.
 197  *                      Four new Flags bits defined for IO Unit Page 2.
 198  *                      Added IO Unit Page 4.
 199  *                      Added EEDP Flags settings to IOC Page 1.
 200  *                      Added new BIOS Page 1 config page.
 201  *  10-05-04 01.05.02   Added define for
 202  *                      MPI_IOCPAGE1_INITIATOR_CONTEXT_REPLY_DISABLE.
 203  *                      Added new Flags field to CONFIG_PAGE_MANUFACTURING_5 and
 204  *                      associated defines.
 205  *                      Added more defines for SAS IO Unit Page 0
 206  *                      DiscoveryStatus field.
 207  *                      Added define for MPI_SAS_IOUNIT0_DS_SUBTRACTIVE_LINK
 208  *                      and MPI_SAS_IOUNIT0_DS_TABLE_LINK.
 209  *                      Added defines for Physical Mapping Modes to SAS IO Unit
 210  *                      Page 2.
 211  *                      Added define for
 212  *                      MPI_SAS_DEVICE0_FLAGS_PORT_SELECTOR_ATTACH.
 213  *  10-27-04 01.05.03   Added defines for new SAS PHY page addressing mode.
 214  *                      Added defines for MaxTargetSpinUp to BIOS Page 1.
 215  *                      Added 5 new ControlFlags defines for SAS IO Unit
 216  *                      Page 1.
 217  *                      Added MaxNumPhysicalMappedIDs field to SAS IO Unit
 218  *                      Page 2.
 219  *                      Added AccessStatus field to SAS Device Page 0 and added
 220  *                      new Flags bits for supported SATA features.
 221  *  12-07-04  01.05.04  Added config page structures for BIOS Page 2, RAID
 222  *                      Volume Page 1, and RAID Physical Disk Page 1.
 223  *                      Replaced IO Unit Page 1 BootTargetID,BootBus, and
 224  *                      BootAdapterNum with reserved field.
 225  *                      Added DataScrubRate and ResyncRate to RAID Volume
 226  *                      Page 0.
 227  *                      Added MPI_SAS_IOUNIT2_FLAGS_RESERVE_ID_0_FOR_BOOT
 228  *                      define.
 229  *  12-09-04  01.05.05  Added Target Mode Large CDB Enable to FC Port Page 1
 230  *                      Flags field.
 231  *                      Added Auto Port Config flag define for SAS IOUNIT
 232  *                      Page 1 ControlFlags.
 233  *                      Added Disabled bad Phy define to Expander Page 1
 234  *                      Discovery Info field.
 235  *                      Added SAS/SATA device support to SAS IOUnit Page 1
 236  *                      ControlFlags.
 237  *                      Added Unsupported device to SAS Dev Page 0 Flags field
 238  *                      Added disable use SATA Hash Address for SAS IOUNIT
 239  *                      page 1 in ControlFields.
 240  *  01-15-05  01.05.06  Added defaults for data scrub rate and resync rate to
 241  *                      Manufacturing Page 4.
 242  *                      Added new defines for BIOS Page 1 IOCSettings field.
 243  *                      Added ExtDiskIdentifier field to RAID Physical Disk
 244  *                      Page 0.
 245  *                      Added new defines for SAS IO Unit Page 1 ControlFlags
 246  *                      and to SAS Device Page 0 Flags to control SATA devices.
 247  *                      Added defines and structures for the new Log Page 0, a
 248  *                      new type of configuration page.
 249  *  02-09-05  01.05.07  Added InactiveStatus field to RAID Volume Page 0.
 250  *                      Added WWID field to RAID Volume Page 1.
 251  *                      Added PhysicalPort field to SAS Expander pages 0 and 1.
 252  *  03-11-05  01.05.08  Removed the EEDP flags from IOC Page 1.
 253  *                      Added Enclosure/Slot boot device format to BIOS Page 2.
 254  *                      New status value for RAID Volume Page 0 VolumeStatus
 255  *                      (VolumeState subfield).
 256  *                      New value for RAID Physical Page 0 InactiveStatus.
 257  *                      Added Inactive Volume Member flag RAID Physical Disk
 258  *                      Page 0 PhysDiskStatus field.
 259  *                      New physical mapping mode in SAS IO Unit Page 2.
 260  *                      Added CONFIG_PAGE_SAS_ENCLOSURE_0.
 261  *                      Added Slot and Enclosure fields to SAS Device Page 0.
 262  *  06-24-05  01.05.09  Added EEDP defines to IOC Page 1.
 263  *                      Added more RAID type defines to IOC Page 2.
 264  *                      Added Port Enable Delay settings to BIOS Page 1.
 265  *                      Added Bad Block Table Full define to RAID Volume Page 0.
 266  *                      Added Previous State defines to RAID Physical Disk
 267  *                      Page 0.
 268  *                      Added Max Sata Targets define for DiscoveryStatus field
 269  *                      of SAS IO Unit Page 0.
 270  *                      Added Device Self Test to Control Flags of SAS IO Unit
 271  *                      Page 1.
 272  *                      Added Direct Attach Starting Slot Number define for SAS
 273  *                      IO Unit Page 2.
 274  *                      Added new fields in SAS Device Page 2 for enclosure
 275  *                      mapping.
 276  *                      Added OwnerDevHandle and Flags field to SAS PHY Page 0.
 277  *                      Added IOC GPIO Flags define to SAS Enclosure Page 0.
 278  *                      Fixed the value for MPI_SAS_IOUNIT1_CONTROL_DEV_SATA_SUPPORT.
 279  *  08-03-05  01.05.10  Removed ISDataScrubRate and ISResyncRate from
 280  *                      Manufacturing Page 4.
 281  *                      Added MPI_IOUNITPAGE1_SATA_WRITE_CACHE_DISABLE bit.
 282  *                      Added NumDevsPerEnclosure field to SAS IO Unit page 2.
 283  *                      Added MPI_SAS_IOUNIT2_FLAGS_HOST_ASSIGNED_PHYS_MAP
 284  *                      define.
 285  *                      Added EnclosureHandle field to SAS Expander page 0.
 286  *                      Removed redundant NumTableEntriesProg field from SAS
 287  *                      Expander Page 1.
 288  *  08-30-05  01.05.11  Added DeviceID for FC949E and changed the DeviceID for
 289  *                      SAS1078.
 290  *                      Added more defines for Manufacturing Page 4 Flags field.
 291  *                      Added more defines for IOCSettings and added
 292  *                      ExpanderSpinup field to Bios Page 1.
 293  *                      Added postpone SATA Init bit to SAS IO Unit Page 1
 294  *                      ControlFlags.
 295  *                      Changed LogEntry format for Log Page 0.
 296  *  03-27-06  01.05.12  Added two new Flags defines for Manufacturing Page 4.
 297  *                      Added Manufacturing Page 7.
 298  *                      Added MPI_IOCPAGE2_CAP_FLAGS_RAID_64_BIT_ADDRESSING.
 299  *                      Added IOC Page 6.
 300  *                      Added PrevBootDeviceForm field to CONFIG_PAGE_BIOS_2.
 301  *                      Added MaxLBAHigh field to RAID Volume Page 0.
 302  *                      Added Nvdata version fields to SAS IO Unit Page 0.
 303  *                      Added AdditionalControlFlags, MaxTargetPortConnectTime,
 304  *                      ReportDeviceMissingDelay, and IODeviceMissingDelay
 305  *                      fields to SAS IO Unit Page 1.
 306  *  10-11-06  01.05.13  Added NumForceWWID field and ForceWWID array to
 307  *                      Manufacturing Page 5.
 308  *                      Added Manufacturing pages 8 through 10.
 309  *                      Added defines for supported metadata size bits in
 310  *                      CapabilitiesFlags field of IOC Page 6.
 311  *                      Added defines for metadata size bits in VolumeSettings
 312  *                      field of RAID Volume Page 0.
 313  *                      Added SATA Link Reset settings, Enable SATA Asynchronous
 314  *                      Notification bit, and HideNonZeroAttachedPhyIdentifiers
 315  *                      bit to AdditionalControlFlags field of SAS IO Unit
 316  *                      Page 1.
 317  *                      Added defines for Enclosure Devices Unmapped and
 318  *                      Device Limit Exceeded bits in Status field of SAS IO
 319  *                      Unit Page 2.
 320  *                      Added more AccessStatus values for SAS Device Page 0.
 321  *                      Added bit for SATA Asynchronous Notification Support in
 322  *                      Flags field of SAS Device Page 0.
 323  *  02-28-07  01.05.14  Added ExtFlags field to Manufacturing Page 4.
 324  *                      Added Disable SMART Polling for CapabilitiesFlags of
 325  *                      IOC Page 6.
 326  *                      Added Disable SMART Polling to DeviceSettings of BIOS
 327  *                      Page 1.
 328  *                      Added Multi-Port Domain bit for DiscoveryStatus field
 329  *                      of SAS IO Unit Page.
 330  *                      Added Multi-Port Domain Illegal flag for SAS IO Unit
 331  *                      Page 1 AdditionalControlFlags field.
 332  *  05-24-07  01.05.15  Added Hide Physical Disks with Non-Integrated RAID
 333  *                      Metadata bit to Manufacturing Page 4 ExtFlags field.
 334  *                      Added Internal Connector to End Device Present bit to
 335  *                      Expander Page 0 Flags field.
 336  *                      Fixed define for
 337  *                      MPI_SAS_EXPANDER1_DISCINFO_BAD_PHY_DISABLED.
 338  *  08-07-07  01.05.16  Added MPI_IOCPAGE6_CAP_FLAGS_MULTIPORT_DRIVE_SUPPORT
 339  *                      define.
 340  *                      Added BIOS Page 4 structure.
 341  *                      Added MPI_RAID_PHYS_DISK1_PATH_MAX define for RAID
 342  *                      Physcial Disk Page 1.
 343  *  01-15-07  01.05.17  Added additional bit defines for ExtFlags field of
 344  *                      Manufacturing Page 4.
 345  *                      Added Solid State Drives Supported bit to IOC Page 6
 346  *                      Capabilities Flags.
 347  *                      Added new value for AccessStatus field of SAS Device
 348  *                      Page 0 (_SATA_NEEDS_INITIALIZATION).
 349  *  03-28-08  01.05.18  Defined new bits in Manufacturing Page 4 ExtFlags field
 350  *                      to control coercion size and the mixing of SAS and SATA
 351  *                      SSD drives.
 352  *  07-11-08  01.05.19  Added defines MPI_MANPAGE4_EXTFLAGS_RAID0_SINGLE_DRIVE
 353  *                      and MPI_MANPAGE4_EXTFLAGS_SSD_SCRUB_DISABLE for ExtFlags
 354  *                      field of Manufacturing Page 4.
 355  *                      Added defines for a new bit in BIOS Page 1 BiosOptions
 356  *                      field to control adapter scan order.
 357  *                      Added BootDeviceWaitTime field to SAS IO Unit Page 2.
 358  *                      Added MPI_SAS_PHY0_PHYINFO_PHY_VACANT for use in PhyInfo
 359  *                      field of SAS Expander Page 1.
 360  *  --------------------------------------------------------------------------
 361  */
 362
 363 #ifndef MPI_CNFG_H
 364 #define MPI_CNFG_H
 365
 366
 367 /*****************************************************************************
 368 *
 369 *       C o n f i g    M e s s a g e    a n d    S t r u c t u r e s
 370 *
 371 *****************************************************************************/
 372
 373 typedef struct _CONFIG_PAGE_HEADER
 374 {
 375     U8                      PageVersion;                /* 00h */
 376     U8                      PageLength;                 /* 01h */
 377     U8                      PageNumber;                 /* 02h */
 378     U8                      PageType;                   /* 03h */
 379 } CONFIG_PAGE_HEADER, MPI_POINTER PTR_CONFIG_PAGE_HEADER,
 380   ConfigPageHeader_t, MPI_POINTER pConfigPageHeader_t;
 381
 382 typedef union _CONFIG_PAGE_HEADER_UNION
 383 {
 384    ConfigPageHeader_t  Struct;
 385    U8                  Bytes[4];
 386    U16                 Word16[2];
 387    U32                 Word32;
 388 } ConfigPageHeaderUnion, MPI_POINTER pConfigPageHeaderUnion,
 389   CONFIG_PAGE_HEADER_UNION, MPI_POINTER PTR_CONFIG_PAGE_HEADER_UNION;
 390
 391 typedef struct _CONFIG_EXTENDED_PAGE_HEADER
 392 {
 393     U8                  PageVersion;                /* 00h */
 394     U8                  Reserved1;                  /* 01h */
 395     U8                  PageNumber;                 /* 02h */
 396     U8                  PageType;                   /* 03h */
 397     U16                 ExtPageLength;              /* 04h */
 398     U8                  ExtPageType;                /* 06h */
 399     U8                  Reserved2;                  /* 07h */
 400 } CONFIG_EXTENDED_PAGE_HEADER, MPI_POINTER PTR_CONFIG_EXTENDED_PAGE_HEADER,
 401   ConfigExtendedPageHeader_t, MPI_POINTER pConfigExtendedPageHeader_t;
 402
 403
 404
 405 /****************************************************************************
 406 *   PageType field values
 407 ****************************************************************************/
 408 #define MPI_CONFIG_PAGEATTR_READ_ONLY               (0x00)
 409 #define MPI_CONFIG_PAGEATTR_CHANGEABLE              (0x10)
 410 #define MPI_CONFIG_PAGEATTR_PERSISTENT              (0x20)
 411 #define MPI_CONFIG_PAGEATTR_RO_PERSISTENT           (0x30)
 412 #define MPI_CONFIG_PAGEATTR_MASK                    (0xF0)
 413
 414 #define MPI_CONFIG_PAGETYPE_IO_UNIT                 (0x00)
 415 #define MPI_CONFIG_PAGETYPE_IOC                     (0x01)
 416 #define MPI_CONFIG_PAGETYPE_BIOS                    (0x02)
 417 #define MPI_CONFIG_PAGETYPE_SCSI_PORT               (0x03)
 418 #define MPI_CONFIG_PAGETYPE_SCSI_DEVICE             (0x04)
 419 #define MPI_CONFIG_PAGETYPE_FC_PORT                 (0x05)
 420 #define MPI_CONFIG_PAGETYPE_FC_DEVICE               (0x06)
 421 #define MPI_CONFIG_PAGETYPE_LAN                     (0x07)
 422 #define MPI_CONFIG_PAGETYPE_RAID_VOLUME             (0x08)
 423 #define MPI_CONFIG_PAGETYPE_MANUFACTURING           (0x09)
 424 #define MPI_CONFIG_PAGETYPE_RAID_PHYSDISK           (0x0A)
 425 #define MPI_CONFIG_PAGETYPE_INBAND                  (0x0B)
 426 #define MPI_CONFIG_PAGETYPE_EXTENDED                (0x0F)
 427 #define MPI_CONFIG_PAGETYPE_MASK                    (0x0F)
 428
 429 #define MPI_CONFIG_TYPENUM_MASK                     (0x0FFF)
 430
 431
 432 /****************************************************************************
 433 *   ExtPageType field values
 434 ****************************************************************************/
 435 #define MPI_CONFIG_EXTPAGETYPE_SAS_IO_UNIT          (0x10)
 436 #define MPI_CONFIG_EXTPAGETYPE_SAS_EXPANDER         (0x11)
 437 #define MPI_CONFIG_EXTPAGETYPE_SAS_DEVICE           (0x12)
 438 #define MPI_CONFIG_EXTPAGETYPE_SAS_PHY              (0x13)
 439 #define MPI_CONFIG_EXTPAGETYPE_LOG                  (0x14)
 440 #define MPI_CONFIG_EXTPAGETYPE_ENCLOSURE            (0x15)
 441
 442
 443 /****************************************************************************
 444 *   PageAddress field values
 445 ****************************************************************************/
 446 #define MPI_SCSI_PORT_PGAD_PORT_MASK                (0x000000FF)
 447
 448 #define MPI_SCSI_DEVICE_FORM_MASK                   (0xF0000000)
 449 #define MPI_SCSI_DEVICE_FORM_BUS_TID                (0x00000000)
 450 #define MPI_SCSI_DEVICE_TARGET_ID_MASK              (0x000000FF)
 451 #define MPI_SCSI_DEVICE_TARGET_ID_SHIFT             (0)
 452 #define MPI_SCSI_DEVICE_BUS_MASK                    (0x0000FF00)
 453 #define MPI_SCSI_DEVICE_BUS_SHIFT                   (8)
 454 #define MPI_SCSI_DEVICE_FORM_TARGET_MODE            (0x10000000)
 455 #define MPI_SCSI_DEVICE_TM_RESPOND_ID_MASK          (0x000000FF)
 456 #define MPI_SCSI_DEVICE_TM_RESPOND_ID_SHIFT         (0)
 457 #define MPI_SCSI_DEVICE_TM_BUS_MASK                 (0x0000FF00)
 458 #define MPI_SCSI_DEVICE_TM_BUS_SHIFT                (8)
 459 #define MPI_SCSI_DEVICE_TM_INIT_ID_MASK             (0x00FF0000)
 460 #define MPI_SCSI_DEVICE_TM_INIT_ID_SHIFT            (16)
 461
 462 #define MPI_FC_PORT_PGAD_PORT_MASK                  (0xF0000000)
 463 #define MPI_FC_PORT_PGAD_PORT_SHIFT                 (28)
 464 #define MPI_FC_PORT_PGAD_FORM_MASK                  (0x0F000000)
 465 #define MPI_FC_PORT_PGAD_FORM_INDEX                 (0x01000000)
 466 #define MPI_FC_PORT_PGAD_INDEX_MASK                 (0x0000FFFF)
 467 #define MPI_FC_PORT_PGAD_INDEX_SHIFT                (0)
 468
 469 #define MPI_FC_DEVICE_PGAD_PORT_MASK                (0xF0000000)
 470 #define MPI_FC_DEVICE_PGAD_PORT_SHIFT               (28)
 471 #define MPI_FC_DEVICE_PGAD_FORM_MASK                (0x0F000000)
 472 #define MPI_FC_DEVICE_PGAD_FORM_NEXT_DID            (0x00000000)
 473 #define MPI_FC_DEVICE_PGAD_ND_PORT_MASK             (0xF0000000)
 474 #define MPI_FC_DEVICE_PGAD_ND_PORT_SHIFT            (28)
 475 #define MPI_FC_DEVICE_PGAD_ND_DID_MASK              (0x00FFFFFF)
 476 #define MPI_FC_DEVICE_PGAD_ND_DID_SHIFT             (0)
 477 #define MPI_FC_DEVICE_PGAD_FORM_BUS_TID             (0x01000000)
 478 #define MPI_FC_DEVICE_PGAD_BT_BUS_MASK              (0x0000FF00)
 479 #define MPI_FC_DEVICE_PGAD_BT_BUS_SHIFT             (8)
 480 #define MPI_FC_DEVICE_PGAD_BT_TID_MASK              (0x000000FF)
 481 #define MPI_FC_DEVICE_PGAD_BT_TID_SHIFT             (0)
 482
 483 #define MPI_PHYSDISK_PGAD_PHYSDISKNUM_MASK          (0x000000FF)
 484 #define MPI_PHYSDISK_PGAD_PHYSDISKNUM_SHIFT         (0)
 485
 486 #define MPI_SAS_EXPAND_PGAD_FORM_MASK             (0xF0000000)
 487 #define MPI_SAS_EXPAND_PGAD_FORM_SHIFT            (28)
 488 #define MPI_SAS_EXPAND_PGAD_FORM_GET_NEXT_HANDLE  (0x00000000)
 489 #define MPI_SAS_EXPAND_PGAD_FORM_HANDLE_PHY_NUM   (0x00000001)
 490 #define MPI_SAS_EXPAND_PGAD_FORM_HANDLE           (0x00000002)
 491 #define MPI_SAS_EXPAND_PGAD_GNH_MASK_HANDLE       (0x0000FFFF)
 492 #define MPI_SAS_EXPAND_PGAD_GNH_SHIFT_HANDLE      (0)
 493 #define MPI_SAS_EXPAND_PGAD_HPN_MASK_PHY          (0x00FF0000)
 494 #define MPI_SAS_EXPAND_PGAD_HPN_SHIFT_PHY         (16)
 495 #define MPI_SAS_EXPAND_PGAD_HPN_MASK_HANDLE       (0x0000FFFF)
 496 #define MPI_SAS_EXPAND_PGAD_HPN_SHIFT_HANDLE      (0)
 497 #define MPI_SAS_EXPAND_PGAD_H_MASK_HANDLE         (0x0000FFFF)
 498 #define MPI_SAS_EXPAND_PGAD_H_SHIFT_HANDLE        (0)
 499
 500 #define MPI_SAS_DEVICE_PGAD_FORM_MASK               (0xF0000000)
 501 #define MPI_SAS_DEVICE_PGAD_FORM_SHIFT              (28)
 502 #define MPI_SAS_DEVICE_PGAD_FORM_GET_NEXT_HANDLE    (0x00000000)
 503 #define MPI_SAS_DEVICE_PGAD_FORM_BUS_TARGET_ID      (0x00000001)
 504 #define MPI_SAS_DEVICE_PGAD_FORM_HANDLE             (0x00000002)
 505 #define MPI_SAS_DEVICE_PGAD_GNH_HANDLE_MASK         (0x0000FFFF)
 506 #define MPI_SAS_DEVICE_PGAD_GNH_HANDLE_SHIFT        (0)
 507 #define MPI_SAS_DEVICE_PGAD_BT_BUS_MASK             (0x0000FF00)
 508 #define MPI_SAS_DEVICE_PGAD_BT_BUS_SHIFT            (8)
 509 #define MPI_SAS_DEVICE_PGAD_BT_TID_MASK             (0x000000FF)
 510 #define MPI_SAS_DEVICE_PGAD_BT_TID_SHIFT            (0)
 511 #define MPI_SAS_DEVICE_PGAD_H_HANDLE_MASK           (0x0000FFFF)
 512 #define MPI_SAS_DEVICE_PGAD_H_HANDLE_SHIFT          (0)
 513
 514 #define MPI_SAS_PHY_PGAD_FORM_MASK                  (0xF0000000)
 515 #define MPI_SAS_PHY_PGAD_FORM_SHIFT                 (28)
 516 #define MPI_SAS_PHY_PGAD_FORM_PHY_NUMBER            (0x0)
 517 #define MPI_SAS_PHY_PGAD_FORM_PHY_TBL_INDEX         (0x1)
 518 #define MPI_SAS_PHY_PGAD_PHY_NUMBER_MASK            (0x000000FF)
 519 #define MPI_SAS_PHY_PGAD_PHY_NUMBER_SHIFT           (0)
 520 #define MPI_SAS_PHY_PGAD_PHY_TBL_INDEX_MASK         (0x0000FFFF)
 521 #define MPI_SAS_PHY_PGAD_PHY_TBL_INDEX_SHIFT        (0)
 522
 523 #define MPI_SAS_ENCLOS_PGAD_FORM_MASK               (0xF0000000)
 524 #define MPI_SAS_ENCLOS_PGAD_FORM_SHIFT              (28)
 525 #define MPI_SAS_ENCLOS_PGAD_FORM_GET_NEXT_HANDLE    (0x00000000)
 526 #define MPI_SAS_ENCLOS_PGAD_FORM_HANDLE             (0x00000001)
 527 #define MPI_SAS_ENCLOS_PGAD_GNH_HANDLE_MASK         (0x0000FFFF)
 528 #define MPI_SAS_ENCLOS_PGAD_GNH_HANDLE_SHIFT        (0)
 529 #define MPI_SAS_ENCLOS_PGAD_H_HANDLE_MASK           (0x0000FFFF)
 530 #define MPI_SAS_ENCLOS_PGAD_H_HANDLE_SHIFT          (0)
 531
 532
 533
 534 /****************************************************************************
 535 *   Config Request Message
 536 ****************************************************************************/
 537 typedef struct _MSG_CONFIG
 538 {
 539     U8                      Action;                     /* 00h */
 540     U8                      Reserved;                   /* 01h */
 541     U8                      ChainOffset;                /* 02h */
 542     U8                      Function;                   /* 03h */
 543     U16                     ExtPageLength;              /* 04h */
 544     U8                      ExtPageType;                /* 06h */
 545     U8                      MsgFlags;                   /* 07h */
 546     U32                     MsgContext;                 /* 08h */
 547     U8                      Reserved2[8];               /* 0Ch */
 548     CONFIG_PAGE_HEADER      Header;                     /* 14h */
 549     U32                     PageAddress;                /* 18h */
 550     SGE_IO_UNION            PageBufferSGE;              /* 1Ch */
 551 } MSG_CONFIG, MPI_POINTER PTR_MSG_CONFIG,
 552   Config_t, MPI_POINTER pConfig_t;
 553
 554
 555 /****************************************************************************
 556 *   Action field values
 557 ****************************************************************************/
 558 #define MPI_CONFIG_ACTION_PAGE_HEADER               (0x00)
 559 #define MPI_CONFIG_ACTION_PAGE_READ_CURRENT         (0x01)
 560 #define MPI_CONFIG_ACTION_PAGE_WRITE_CURRENT        (0x02)
 561 #define MPI_CONFIG_ACTION_PAGE_DEFAULT              (0x03)
 562 #define MPI_CONFIG_ACTION_PAGE_WRITE_NVRAM          (0x04)
 563 #define MPI_CONFIG_ACTION_PAGE_READ_DEFAULT         (0x05)
 564 #define MPI_CONFIG_ACTION_PAGE_READ_NVRAM           (0x06)
 565
 566
 567 /* Config Reply Message */
 568 typedef struct _MSG_CONFIG_REPLY
 569 {
 570     U8                      Action;                     /* 00h */
 571     U8                      Reserved;                   /* 01h */
 572     U8                      MsgLength;                  /* 02h */
 573     U8                      Function;                   /* 03h */
 574     U16                     ExtPageLength;              /* 04h */
 575     U8                      ExtPageType;                /* 06h */
 576     U8                      MsgFlags;                   /* 07h */
 577     U32                     MsgContext;                 /* 08h */
 578     U8                      Reserved2[2];               /* 0Ch */
 579     U16                     IOCStatus;                  /* 0Eh */
 580     U32                     IOCLogInfo;                 /* 10h */
 581     CONFIG_PAGE_HEADER      Header;                     /* 14h */
 582 } MSG_CONFIG_REPLY, MPI_POINTER PTR_MSG_CONFIG_REPLY,
 583   ConfigReply_t, MPI_POINTER pConfigReply_t;
 584
 585
 586
 587 /*****************************************************************************
 588 *
 589 *               C o n f i g u r a t i o n    P a g e s
 590 *
 591 *****************************************************************************/
 592
 593 /****************************************************************************
 594 *   Manufacturing Config pages
 595 ****************************************************************************/
 596 #define MPI_MANUFACTPAGE_VENDORID_LSILOGIC          (0x1000)
 597 /* Fibre Channel */
 598 #define MPI_MANUFACTPAGE_DEVICEID_FC909             (0x0621)
 599 #define MPI_MANUFACTPAGE_DEVICEID_FC919             (0x0624)
 600 #define MPI_MANUFACTPAGE_DEVICEID_FC929             (0x0622)
 601 #define MPI_MANUFACTPAGE_DEVICEID_FC919X            (0x0628)
 602 #define MPI_MANUFACTPAGE_DEVICEID_FC929X            (0x0626)
 603 #define MPI_MANUFACTPAGE_DEVICEID_FC939X            (0x0642)
 604 #define MPI_MANUFACTPAGE_DEVICEID_FC949X            (0x0640)
 605 #define MPI_MANUFACTPAGE_DEVICEID_FC949E            (0x0646)
 606 /* SCSI */
 607 #define MPI_MANUFACTPAGE_DEVID_53C1030              (0x0030)
 608 #define MPI_MANUFACTPAGE_DEVID_53C1030ZC            (0x0031)
 609 #define MPI_MANUFACTPAGE_DEVID_1030_53C1035         (0x0032)
 610 #define MPI_MANUFACTPAGE_DEVID_1030ZC_53C1035       (0x0033)
 611 #define MPI_MANUFACTPAGE_DEVID_53C1035              (0x0040)
 612 #define MPI_MANUFACTPAGE_DEVID_53C1035ZC            (0x0041)
 613 /* SAS */
 614 #define MPI_MANUFACTPAGE_DEVID_SAS1064              (0x0050)
 615 #define MPI_MANUFACTPAGE_DEVID_SAS1064A             (0x005C)
 616 #define MPI_MANUFACTPAGE_DEVID_SAS1064E             (0x0056)
 617 #define MPI_MANUFACTPAGE_DEVID_SAS1066              (0x005E)
 618 #define MPI_MANUFACTPAGE_DEVID_SAS1066E             (0x005A)
 619 #define MPI_MANUFACTPAGE_DEVID_SAS1068              (0x0054)
 620 #define MPI_MANUFACTPAGE_DEVID_SAS1068E             (0x0058)
 621 #define MPI_MANUFACTPAGE_DEVID_SAS1078              (0x0062)
 622
 623
 624 typedef struct _CONFIG_PAGE_MANUFACTURING_0
 625 {
 626     CONFIG_PAGE_HEADER      Header;                     /* 00h */
 627     U8                      ChipName[16];               /* 04h */
 628     U8                      ChipRevision[8];            /* 14h */
 629     U8                      BoardName[16];              /* 1Ch */
 630     U8                      BoardAssembly[16];          /* 2Ch */
 631     U8                      BoardTracerNumber[16];      /* 3Ch */
 632
 633 } CONFIG_PAGE_MANUFACTURING_0, MPI_POINTER PTR_CONFIG_PAGE_MANUFACTURING_0,
 634   ManufacturingPage0_t, MPI_POINTER pManufacturingPage0_t;
 635
 636 #define MPI_MANUFACTURING0_PAGEVERSION                 (0x00)
 637
 638
 639 typedef struct _CONFIG_PAGE_MANUFACTURING_1
 640 {
 641     CONFIG_PAGE_HEADER      Header;                     /* 00h */
 642     U8                      VPD[256];                   /* 04h */
 643 } CONFIG_PAGE_MANUFACTURING_1, MPI_POINTER PTR_CONFIG_PAGE_MANUFACTURING_1,
 644   ManufacturingPage1_t, MPI_POINTER pManufacturingPage1_t;
 645
 646 #define MPI_MANUFACTURING1_PAGEVERSION                 (0x00)
 647
 648
 649 typedef struct _MPI_CHIP_REVISION_ID
 650 {
 651     U16 DeviceID;                                       /* 00h */
 652     U8  PCIRevisionID;                                  /* 02h */
 653     U8  Reserved;                                       /* 03h */
 654 } MPI_CHIP_REVISION_ID, MPI_POINTER PTR_MPI_CHIP_REVISION_ID,
 655   MpiChipRevisionId_t, MPI_POINTER pMpiChipRevisionId_t;
 656
 657
 658 /*
 659  * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
 660  * one and check Header.PageLength at runtime.
 661  */
 662 #ifndef MPI_MAN_PAGE_2_HW_SETTINGS_WORDS
 663 #define MPI_MAN_PAGE_2_HW_SETTINGS_WORDS    (1)
 664 #endif
 665
 666 typedef struct _CONFIG_PAGE_MANUFACTURING_2
 667 {
 668     CONFIG_PAGE_HEADER      Header;                                 /* 00h */
 669     MPI_CHIP_REVISION_ID    ChipId;                                 /* 04h */
 670     U32                     HwSettings[MPI_MAN_PAGE_2_HW_SETTINGS_WORDS];/* 08h */
 671 } CONFIG_PAGE_MANUFACTURING_2, MPI_POINTER PTR_CONFIG_PAGE_MANUFACTURING_2,
 672   ManufacturingPage2_t, MPI_POINTER pManufacturingPage2_t;
 673
 674 #define MPI_MANUFACTURING2_PAGEVERSION                  (0x00)
 675
 676
 677 /*
 678  * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
 679  * one and check Header.PageLength at runtime.
 680  */
 681 #ifndef MPI_MAN_PAGE_3_INFO_WORDS
 682 #define MPI_MAN_PAGE_3_INFO_WORDS           (1)
 683 #endif
 684
 685 typedef struct _CONFIG_PAGE_MANUFACTURING_3
 686 {
 687     CONFIG_PAGE_HEADER                  Header;                     /* 00h */
 688     MPI_CHIP_REVISION_ID                ChipId;                     /* 04h */
 689     U32                                 Info[MPI_MAN_PAGE_3_INFO_WORDS];/* 08h */
 690 } CONFIG_PAGE_MANUFACTURING_3, MPI_POINTER PTR_CONFIG_PAGE_MANUFACTURING_3,
 691   ManufacturingPage3_t, MPI_POINTER pManufacturingPage3_t;
 692
 693 #define MPI_MANUFACTURING3_PAGEVERSION                  (0x00)
 694
 695
 696 typedef struct _CONFIG_PAGE_MANUFACTURING_4
 697 {
 698     CONFIG_PAGE_HEADER              Header;             /* 00h */
 699     U32                             Reserved1;          /* 04h */
 700     U8                              InfoOffset0;        /* 08h */
 701     U8                              InfoSize0;          /* 09h */
 702     U8                              InfoOffset1;        /* 0Ah */
 703     U8                              InfoSize1;          /* 0Bh */
 704     U8                              InquirySize;        /* 0Ch */
 705     U8                              Flags;              /* 0Dh */
 706     U16                             ExtFlags;           /* 0Eh */
 707     U8                              InquiryData[56];    /* 10h */
 708     U32                             ISVolumeSettings;   /* 48h */
 709     U32                             IMEVolumeSettings;  /* 4Ch */
 710     U32                             IMVolumeSettings;   /* 50h */
 711     U32                             Reserved3;          /* 54h */
 712     U32                             Reserved4;          /* 58h */
 713     U32                             Reserved5;          /* 5Ch */
 714     U8                              IMEDataScrubRate;   /* 60h */
 715     U8                              IMEResyncRate;      /* 61h */
 716     U16                             Reserved6;          /* 62h */
 717     U8                              IMDataScrubRate;    /* 64h */
 718     U8                              IMResyncRate;       /* 65h */
 719     U16                             Reserved7;          /* 66h */
 720     U32                             Reserved8;          /* 68h */
 721     U32                             Reserved9;          /* 6Ch */
 722 } CONFIG_PAGE_MANUFACTURING_4, MPI_POINTER PTR_CONFIG_PAGE_MANUFACTURING_4,
 723   ManufacturingPage4_t, MPI_POINTER pManufacturingPage4_t;
 724
 725 #define MPI_MANUFACTURING4_PAGEVERSION                  (0x05)
 726
 727 /* defines for the Flags field */
 728 #define MPI_MANPAGE4_FORCE_BAD_BLOCK_TABLE              (0x80)
 729 #define MPI_MANPAGE4_FORCE_OFFLINE_FAILOVER             (0x40)
 730 #define MPI_MANPAGE4_IME_DISABLE                        (0x20)
 731 #define MPI_MANPAGE4_IM_DISABLE                         (0x10)
 732 #define MPI_MANPAGE4_IS_DISABLE                         (0x08)
 733 #define MPI_MANPAGE4_IR_MODEPAGE8_DISABLE               (0x04)
 734 #define MPI_MANPAGE4_IM_RESYNC_CACHE_ENABLE             (0x02)
 735 #define MPI_MANPAGE4_IR_NO_MIX_SAS_SATA                 (0x01)
 736
 737 /* defines for the ExtFlags field */
 738 #define MPI_MANPAGE4_EXTFLAGS_RAID0_SINGLE_DRIVE        (0x0400)
 739 #define MPI_MANPAGE4_EXTFLAGS_SSD_SCRUB_DISABLE         (0x0200)
 740 #define MPI_MANPAGE4_EXTFLAGS_MASK_COERCION_SIZE        (0x0180)
 741 #define MPI_MANPAGE4_EXTFLAGS_SHIFT_COERCION_SIZE       (7)
 742 #define MPI_MANPAGE4_EXTFLAGS_1GB_COERCION_SIZE         (0)
 743 #define MPI_MANPAGE4_EXTFLAGS_128MB_COERCION_SIZE       (1)
 744
 745 #define MPI_MANPAGE4_EXTFLAGS_NO_MIX_SSD_SAS_SATA       (0x0040)
 746 #define MPI_MANPAGE4_EXTFLAGS_MIX_SSD_AND_NON_SSD       (0x0020)
 747 #define MPI_MANPAGE4_EXTFLAGS_DUAL_PORT_SUPPORT         (0x0010)
 748 #define MPI_MANPAGE4_EXTFLAGS_HIDE_NON_IR_METADATA      (0x0008)
 749 #define MPI_MANPAGE4_EXTFLAGS_SAS_CACHE_DISABLE         (0x0004)
 750 #define MPI_MANPAGE4_EXTFLAGS_SATA_CACHE_DISABLE        (0x0002)
 751 #define MPI_MANPAGE4_EXTFLAGS_LEGACY_MODE               (0x0001)
 752
 753
 754 #ifndef MPI_MANPAGE5_NUM_FORCEWWID
 755 #define MPI_MANPAGE5_NUM_FORCEWWID      (1)
 756 #endif
 757
 758 typedef struct _CONFIG_PAGE_MANUFACTURING_5
 759 {
 760     CONFIG_PAGE_HEADER              Header;             /* 00h */
 761     U64                             BaseWWID;           /* 04h */
 762     U8                              Flags;              /* 0Ch */
 763     U8                              NumForceWWID;       /* 0Dh */
 764     U16                             Reserved2;          /* 0Eh */
 765     U32                             Reserved3;          /* 10h */
 766     U32                             Reserved4;          /* 14h */
 767     U64                             ForceWWID[MPI_MANPAGE5_NUM_FORCEWWID]; /* 18h */
 768 } CONFIG_PAGE_MANUFACTURING_5, MPI_POINTER PTR_CONFIG_PAGE_MANUFACTURING_5,
 769   ManufacturingPage5_t, MPI_POINTER pManufacturingPage5_t;
 770
 771 #define MPI_MANUFACTURING5_PAGEVERSION                  (0x02)
 772
 773 /* defines for the Flags field */
 774 #define MPI_MANPAGE5_TWO_WWID_PER_PHY                   (0x01)
 775
 776
 777 typedef struct _CONFIG_PAGE_MANUFACTURING_6
 778 {
 779     CONFIG_PAGE_HEADER              Header;             /* 00h */
 780     U32                             ProductSpecificInfo;/* 04h */
 781 } CONFIG_PAGE_MANUFACTURING_6, MPI_POINTER PTR_CONFIG_PAGE_MANUFACTURING_6,
 782   ManufacturingPage6_t, MPI_POINTER pManufacturingPage6_t;
 783
 784 #define MPI_MANUFACTURING6_PAGEVERSION                  (0x00)
 785
 786
 787 typedef struct _MPI_MANPAGE7_CONNECTOR_INFO
 788 {
 789     U32                         Pinout;                 /* 00h */
 790     U8                          Connector[16];          /* 04h */
 791     U8                          Location;               /* 14h */
 792     U8                          Reserved1;              /* 15h */
 793     U16                         Slot;                   /* 16h */
 794     U32                         Reserved2;              /* 18h */
 795 } MPI_MANPAGE7_CONNECTOR_INFO, MPI_POINTER PTR_MPI_MANPAGE7_CONNECTOR_INFO,
 796   MpiManPage7ConnectorInfo_t, MPI_POINTER pMpiManPage7ConnectorInfo_t;
 797
 798 /* defines for the Pinout field */
 799 #define MPI_MANPAGE7_PINOUT_SFF_8484_L4                 (0x00080000)
 800 #define MPI_MANPAGE7_PINOUT_SFF_8484_L3                 (0x00040000)
 801 #define MPI_MANPAGE7_PINOUT_SFF_8484_L2                 (0x00020000)
 802 #define MPI_MANPAGE7_PINOUT_SFF_8484_L1                 (0x00010000)
 803 #define MPI_MANPAGE7_PINOUT_SFF_8470_L4                 (0x00000800)
 804 #define MPI_MANPAGE7_PINOUT_SFF_8470_L3                 (0x00000400)
 805 #define MPI_MANPAGE7_PINOUT_SFF_8470_L2                 (0x00000200)
 806 #define MPI_MANPAGE7_PINOUT_SFF_8470_L1                 (0x00000100)
 807 #define MPI_MANPAGE7_PINOUT_SFF_8482                    (0x00000002)
 808 #define MPI_MANPAGE7_PINOUT_CONNECTION_UNKNOWN          (0x00000001)
 809
 810 /* defines for the Location field */
 811 #define MPI_MANPAGE7_LOCATION_UNKNOWN                   (0x01)
 812 #define MPI_MANPAGE7_LOCATION_INTERNAL                  (0x02)
 813 #define MPI_MANPAGE7_LOCATION_EXTERNAL                  (0x04)
 814 #define MPI_MANPAGE7_LOCATION_SWITCHABLE                (0x08)
 815 #define MPI_MANPAGE7_LOCATION_AUTO                      (0x10)
 816 #define MPI_MANPAGE7_LOCATION_NOT_PRESENT               (0x20)
 817 #define MPI_MANPAGE7_LOCATION_NOT_CONNECTED             (0x80)
 818
 819 /*
 820  * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
 821  * one and check NumPhys at runtime.
 822  */
 823 #ifndef MPI_MANPAGE7_CONNECTOR_INFO_MAX
 824 #define MPI_MANPAGE7_CONNECTOR_INFO_MAX   (1)
 825 #endif
 826
 827 typedef struct _CONFIG_PAGE_MANUFACTURING_7
 828 {
 829     CONFIG_PAGE_HEADER          Header;                 /* 00h */
 830     U32                         Reserved1;              /* 04h */
 831     U32                         Reserved2;              /* 08h */
 832     U32                         Flags;                  /* 0Ch */
 833     U8                          EnclosureName[16];      /* 10h */
 834     U8                          NumPhys;                /* 20h */
 835     U8                          Reserved3;              /* 21h */
 836     U16                         Reserved4;              /* 22h */
 837     MPI_MANPAGE7_CONNECTOR_INFO ConnectorInfo[MPI_MANPAGE7_CONNECTOR_INFO_MAX]; /* 24h */
 838 } CONFIG_PAGE_MANUFACTURING_7, MPI_POINTER PTR_CONFIG_PAGE_MANUFACTURING_7,
 839   ManufacturingPage7_t, MPI_POINTER pManufacturingPage7_t;
 840
 841 #define MPI_MANUFACTURING7_PAGEVERSION                  (0x00)
 842
 843 /* defines for the Flags field */
 844 #define MPI_MANPAGE7_FLAG_USE_SLOT_INFO                 (0x00000001)
 845
 846
 847 typedef struct _CONFIG_PAGE_MANUFACTURING_8
 848 {
 849     CONFIG_PAGE_HEADER              Header;             /* 00h */
 850     U32                             ProductSpecificInfo;/* 04h */
 851 } CONFIG_PAGE_MANUFACTURING_8, MPI_POINTER PTR_CONFIG_PAGE_MANUFACTURING_8,
 852   ManufacturingPage8_t, MPI_POINTER pManufacturingPage8_t;
 853
 854 #define MPI_MANUFACTURING8_PAGEVERSION                  (0x00)
 855
 856
 857 typedef struct _CONFIG_PAGE_MANUFACTURING_9
 858 {
 859     CONFIG_PAGE_HEADER              Header;             /* 00h */
 860     U32                             ProductSpecificInfo;/* 04h */
 861 } CONFIG_PAGE_MANUFACTURING_9, MPI_POINTER PTR_CONFIG_PAGE_MANUFACTURING_9,
 862   ManufacturingPage9_t, MPI_POINTER pManufacturingPage9_t;
 863
 864 #define MPI_MANUFACTURING9_PAGEVERSION                  (0x00)
 865
 866
 867 typedef struct _CONFIG_PAGE_MANUFACTURING_10
 868 {
 869     CONFIG_PAGE_HEADER              Header;             /* 00h */
 870     U32                             ProductSpecificInfo;/* 04h */
 871 } CONFIG_PAGE_MANUFACTURING_10, MPI_POINTER PTR_CONFIG_PAGE_MANUFACTURING_10,
 872   ManufacturingPage10_t, MPI_POINTER pManufacturingPage10_t;
 873
 874 #define MPI_MANUFACTURING10_PAGEVERSION                 (0x00)
 875
 876
 877 /****************************************************************************
 878 *   IO Unit Config Pages
 879 ****************************************************************************/
 880
 881 typedef struct _CONFIG_PAGE_IO_UNIT_0
 882 {
 883     CONFIG_PAGE_HEADER      Header;                     /* 00h */
 884     U64                     UniqueValue;                /* 04h */
 885 } CONFIG_PAGE_IO_UNIT_0, MPI_POINTER PTR_CONFIG_PAGE_IO_UNIT_0,
 886   IOUnitPage0_t, MPI_POINTER pIOUnitPage0_t;
 887
 888 #define MPI_IOUNITPAGE0_PAGEVERSION                     (0x00)
 889
 890
 891 typedef struct _CONFIG_PAGE_IO_UNIT_1
 892 {
 893     CONFIG_PAGE_HEADER      Header;                     /* 00h */
 894     U32                     Flags;                      /* 04h */
 895 } CONFIG_PAGE_IO_UNIT_1, MPI_POINTER PTR_CONFIG_PAGE_IO_UNIT_1,
 896   IOUnitPage1_t, MPI_POINTER pIOUnitPage1_t;
 897
 898 #define MPI_IOUNITPAGE1_PAGEVERSION                     (0x02)
 899
 900 /* IO Unit Page 1 Flags defines */
 901 #define MPI_IOUNITPAGE1_MULTI_FUNCTION                  (0x00000000)
 902 #define MPI_IOUNITPAGE1_SINGLE_FUNCTION                 (0x00000001)
 903 #define MPI_IOUNITPAGE1_MULTI_PATHING                   (0x00000002)
 904 #define MPI_IOUNITPAGE1_SINGLE_PATHING                  (0x00000000)
 905 #define MPI_IOUNITPAGE1_IR_USE_STATIC_VOLUME_ID         (0x00000004)
 906 #define MPI_IOUNITPAGE1_DISABLE_QUEUE_FULL_HANDLING     (0x00000020)
 907 #define MPI_IOUNITPAGE1_DISABLE_IR                      (0x00000040)
 908 #define MPI_IOUNITPAGE1_FORCE_32                        (0x00000080)
 909 #define MPI_IOUNITPAGE1_NATIVE_COMMAND_Q_DISABLE        (0x00000100)
 910 #define MPI_IOUNITPAGE1_SATA_WRITE_CACHE_DISABLE        (0x00000200)
 911
 912 typedef struct _MPI_ADAPTER_INFO
 913 {
 914     U8      PciBusNumber;                               /* 00h */
 915     U8      PciDeviceAndFunctionNumber;                 /* 01h */
 916     U16     AdapterFlags;                               /* 02h */
 917 } MPI_ADAPTER_INFO, MPI_POINTER PTR_MPI_ADAPTER_INFO,
 918   MpiAdapterInfo_t, MPI_POINTER pMpiAdapterInfo_t;
 919
 920 #define MPI_ADAPTER_INFO_FLAGS_EMBEDDED                 (0x0001)
 921 #define MPI_ADAPTER_INFO_FLAGS_INIT_STATUS              (0x0002)
 922
 923 typedef struct _CONFIG_PAGE_IO_UNIT_2
 924 {
 925     CONFIG_PAGE_HEADER      Header;                     /* 00h */
 926     U32                     Flags;                      /* 04h */
 927     U32                     BiosVersion;                /* 08h */
 928     MPI_ADAPTER_INFO        AdapterOrder[4];            /* 0Ch */
 929     U32                     Reserved1;                  /* 1Ch */
 930 } CONFIG_PAGE_IO_UNIT_2, MPI_POINTER PTR_CONFIG_PAGE_IO_UNIT_2,
 931   IOUnitPage2_t, MPI_POINTER pIOUnitPage2_t;
 932
 933 #define MPI_IOUNITPAGE2_PAGEVERSION                     (0x02)
 934
 935 #define MPI_IOUNITPAGE2_FLAGS_PAUSE_ON_ERROR            (0x00000002)
 936 #define MPI_IOUNITPAGE2_FLAGS_VERBOSE_ENABLE            (0x00000004)
 937 #define MPI_IOUNITPAGE2_FLAGS_COLOR_VIDEO_DISABLE       (0x00000008)
 938 #define MPI_IOUNITPAGE2_FLAGS_DONT_HOOK_INT_40          (0x00000010)
 939
 940 #define MPI_IOUNITPAGE2_FLAGS_DEV_LIST_DISPLAY_MASK     (0x000000E0)
 941 #define MPI_IOUNITPAGE2_FLAGS_INSTALLED_DEV_DISPLAY     (0x00000000)
 942 #define MPI_IOUNITPAGE2_FLAGS_ADAPTER_DISPLAY           (0x00000020)
 943 #define MPI_IOUNITPAGE2_FLAGS_ADAPTER_DEV_DISPLAY       (0x00000040)
 944
 945
 946 /*
 947  * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
 948  * one and check Header.PageLength at runtime.
 949  */
 950 #ifndef MPI_IO_UNIT_PAGE_3_GPIO_VAL_MAX
 951 #define MPI_IO_UNIT_PAGE_3_GPIO_VAL_MAX     (1)
 952 #endif
 953
 954 typedef struct _CONFIG_PAGE_IO_UNIT_3
 955 {
 956     CONFIG_PAGE_HEADER      Header;                                   /* 00h */
 957     U8                      GPIOCount;                                /* 04h */
 958     U8                      Reserved1;                                /* 05h */
 959     U16                     Reserved2;                                /* 06h */
 960     U16                     GPIOVal[MPI_IO_UNIT_PAGE_3_GPIO_VAL_MAX]; /* 08h */
 961 } CONFIG_PAGE_IO_UNIT_3, MPI_POINTER PTR_CONFIG_PAGE_IO_UNIT_3,
 962   IOUnitPage3_t, MPI_POINTER pIOUnitPage3_t;
 963
 964 #define MPI_IOUNITPAGE3_PAGEVERSION                     (0x01)
 965
 966 #define MPI_IOUNITPAGE3_GPIO_FUNCTION_MASK              (0xFC)
 967 #define MPI_IOUNITPAGE3_GPIO_FUNCTION_SHIFT             (2)
 968 #define MPI_IOUNITPAGE3_GPIO_SETTING_OFF                (0x00)
 969 #define MPI_IOUNITPAGE3_GPIO_SETTING_ON                 (0x01)
 970
 971
 972 typedef struct _CONFIG_PAGE_IO_UNIT_4
 973 {
 974     CONFIG_PAGE_HEADER      Header;                                   /* 00h */
 975     U32                     Reserved1;                                /* 04h */
 976     SGE_SIMPLE_UNION        FWImageSGE;                               /* 08h */
 977 } CONFIG_PAGE_IO_UNIT_4, MPI_POINTER PTR_CONFIG_PAGE_IO_UNIT_4,
 978   IOUnitPage4_t, MPI_POINTER pIOUnitPage4_t;
 979
 980 #define MPI_IOUNITPAGE4_PAGEVERSION                     (0x00)
 981
 982
 983 /****************************************************************************
 984 *   IOC Config Pages
 985 ****************************************************************************/
 986
 987 typedef struct _CONFIG_PAGE_IOC_0
 988 {
 989     CONFIG_PAGE_HEADER      Header;                     /* 00h */
 990     U32                     TotalNVStore;               /* 04h */
 991     U32                     FreeNVStore;                /* 08h */
 992     U16                     VendorID;                   /* 0Ch */
 993     U16                     DeviceID;                   /* 0Eh */
 994     U8                      RevisionID;                 /* 10h */
 995     U8                      Reserved[3];                /* 11h */
 996     U32                     ClassCode;                  /* 14h */
 997     U16                     SubsystemVendorID;          /* 18h */
 998     U16                     SubsystemID;                /* 1Ah */
 999 } CONFIG_PAGE_IOC_0, MPI_POINTER PTR_CONFIG_PAGE_IOC_0,
1000   IOCPage0_t, MPI_POINTER pIOCPage0_t;
1001
1002 #define MPI_IOCPAGE0_PAGEVERSION                        (0x01)
1003
1004
1005 typedef struct _CONFIG_PAGE_IOC_1
1006 {
1007     CONFIG_PAGE_HEADER      Header;                     /* 00h */
1008     U32                     Flags;                      /* 04h */
1009     U32                     CoalescingTimeout;          /* 08h */
1010     U8                      CoalescingDepth;            /* 0Ch */
1011     U8                      PCISlotNum;                 /* 0Dh */
1012     U8                      Reserved[2];                /* 0Eh */
1013 } CONFIG_PAGE_IOC_1, MPI_POINTER PTR_CONFIG_PAGE_IOC_1,
1014   IOCPage1_t, MPI_POINTER pIOCPage1_t;
1015
1016 #define MPI_IOCPAGE1_PAGEVERSION                        (0x03)
1017
1018 /* defines for the Flags field */
1019 #define MPI_IOCPAGE1_EEDP_MODE_MASK                     (0x07000000)
1020 #define MPI_IOCPAGE1_EEDP_MODE_OFF                      (0x00000000)
1021 #define MPI_IOCPAGE1_EEDP_MODE_T10                      (0x01000000)
1022 #define MPI_IOCPAGE1_EEDP_MODE_LSI_1                    (0x02000000)
1023 #define MPI_IOCPAGE1_INITIATOR_CONTEXT_REPLY_DISABLE    (0x00000010)
1024 #define MPI_IOCPAGE1_REPLY_COALESCING                   (0x00000001)
1025
1026 #define MPI_IOCPAGE1_PCISLOTNUM_UNKNOWN                 (0xFF)
1027
1028
1029 typedef struct _CONFIG_PAGE_IOC_2_RAID_VOL
1030 {
1031     U8                          VolumeID;               /* 00h */
1032     U8                          VolumeBus;              /* 01h */
1033     U8                          VolumeIOC;              /* 02h */
1034     U8                          VolumePageNumber;       /* 03h */
1035     U8                          VolumeType;             /* 04h */
1036     U8                          Flags;                  /* 05h */
1037     U16                         Reserved3;              /* 06h */
1038 } CONFIG_PAGE_IOC_2_RAID_VOL, MPI_POINTER PTR_CONFIG_PAGE_IOC_2_RAID_VOL,
1039   ConfigPageIoc2RaidVol_t, MPI_POINTER pConfigPageIoc2RaidVol_t;
1040
1041 /* IOC Page 2 Volume RAID Type values, also used in RAID Volume pages */
1042
1043 #define MPI_RAID_VOL_TYPE_IS                        (0x00)
1044 #define MPI_RAID_VOL_TYPE_IME                       (0x01)
1045 #define MPI_RAID_VOL_TYPE_IM                        (0x02)
1046 #define MPI_RAID_VOL_TYPE_RAID_5                    (0x03)
1047 #define MPI_RAID_VOL_TYPE_RAID_6                    (0x04)
1048 #define MPI_RAID_VOL_TYPE_RAID_10                   (0x05)
1049 #define MPI_RAID_VOL_TYPE_RAID_50                   (0x06)
1050 #define MPI_RAID_VOL_TYPE_UNKNOWN                   (0xFF)
1051
1052 /* IOC Page 2 Volume Flags values */
1053
1054 #define MPI_IOCPAGE2_FLAG_VOLUME_INACTIVE           (0x08)
1055
1056 /*
1057  * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
1058  * one and check Header.PageLength at runtime.
1059  */
1060 #ifndef MPI_IOC_PAGE_2_RAID_VOLUME_MAX
1061 #define MPI_IOC_PAGE_2_RAID_VOLUME_MAX      (1)
1062 #endif
1063
1064 typedef struct _CONFIG_PAGE_IOC_2
1065 {
1066     CONFIG_PAGE_HEADER          Header;                              /* 00h */
1067     U32                         CapabilitiesFlags;                   /* 04h */
1068     U8                          NumActiveVolumes;                    /* 08h */
1069     U8                          MaxVolumes;                          /* 09h */
1070     U8                          NumActivePhysDisks;                  /* 0Ah */
1071     U8                          MaxPhysDisks;                        /* 0Bh */
1072     CONFIG_PAGE_IOC_2_RAID_VOL  RaidVolume[MPI_IOC_PAGE_2_RAID_VOLUME_MAX];/* 0Ch */
1073 } CONFIG_PAGE_IOC_2, MPI_POINTER PTR_CONFIG_PAGE_IOC_2,
1074   IOCPage2_t, MPI_POINTER pIOCPage2_t;
1075
1076 #define MPI_IOCPAGE2_PAGEVERSION                        (0x04)
1077
1078 /* IOC Page 2 Capabilities flags */
1079
1080 #define MPI_IOCPAGE2_CAP_FLAGS_IS_SUPPORT               (0x00000001)
1081 #define MPI_IOCPAGE2_CAP_FLAGS_IME_SUPPORT              (0x00000002)
1082 #define MPI_IOCPAGE2_CAP_FLAGS_IM_SUPPORT               (0x00000004)
1083 #define MPI_IOCPAGE2_CAP_FLAGS_RAID_5_SUPPORT           (0x00000008)
1084 #define MPI_IOCPAGE2_CAP_FLAGS_RAID_6_SUPPORT           (0x00000010)
1085 #define MPI_IOCPAGE2_CAP_FLAGS_RAID_10_SUPPORT          (0x00000020)
1086 #define MPI_IOCPAGE2_CAP_FLAGS_RAID_50_SUPPORT          (0x00000040)
1087 #define MPI_IOCPAGE2_CAP_FLAGS_RAID_64_BIT_ADDRESSING   (0x10000000)
1088 #define MPI_IOCPAGE2_CAP_FLAGS_SES_SUPPORT              (0x20000000)
1089 #define MPI_IOCPAGE2_CAP_FLAGS_SAFTE_SUPPORT            (0x40000000)
1090 #define MPI_IOCPAGE2_CAP_FLAGS_CROSS_CHANNEL_SUPPORT    (0x80000000)
1091
1092
1093 typedef struct _IOC_3_PHYS_DISK
1094 {
1095     U8                          PhysDiskID;             /* 00h */
1096     U8                          PhysDiskBus;            /* 01h */
1097     U8                          PhysDiskIOC;            /* 02h */
1098     U8                          PhysDiskNum;            /* 03h */
1099 } IOC_3_PHYS_DISK, MPI_POINTER PTR_IOC_3_PHYS_DISK,
1100   Ioc3PhysDisk_t, MPI_POINTER pIoc3PhysDisk_t;
1101
1102 /*
1103  * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
1104  * one and check Header.PageLength at runtime.
1105  */
1106 #ifndef MPI_IOC_PAGE_3_PHYSDISK_MAX
1107 #define MPI_IOC_PAGE_3_PHYSDISK_MAX         (1)
1108 #endif
1109
1110 typedef struct _CONFIG_PAGE_IOC_3
1111 {
1112     CONFIG_PAGE_HEADER          Header;                                /* 00h */
1113     U8                          NumPhysDisks;                          /* 04h */
1114     U8                          Reserved1;                             /* 05h */
1115     U16                         Reserved2;                             /* 06h */
1116     IOC_3_PHYS_DISK             PhysDisk[MPI_IOC_PAGE_3_PHYSDISK_MAX]; /* 08h */
1117 } CONFIG_PAGE_IOC_3, MPI_POINTER PTR_CONFIG_PAGE_IOC_3,
1118   IOCPage3_t, MPI_POINTER pIOCPage3_t;
1119
1120 #define MPI_IOCPAGE3_PAGEVERSION                        (0x00)
1121
1122
1123 typedef struct _IOC_4_SEP
1124 {
1125     U8                          SEPTargetID;            /* 00h */
1126     U8                          SEPBus;                 /* 01h */
1127     U16                         Reserved;               /* 02h */
1128 } IOC_4_SEP, MPI_POINTER PTR_IOC_4_SEP,
1129   Ioc4Sep_t, MPI_POINTER pIoc4Sep_t;
1130
1131 /*
1132  * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
1133  * one and check Header.PageLength at runtime.
1134  */
1135 #ifndef MPI_IOC_PAGE_4_SEP_MAX
1136 #define MPI_IOC_PAGE_4_SEP_MAX              (1)
1137 #endif
1138
1139 typedef struct _CONFIG_PAGE_IOC_4
1140 {
1141     CONFIG_PAGE_HEADER          Header;                         /* 00h */
1142     U8                          ActiveSEP;                      /* 04h */
1143     U8                          MaxSEP;                         /* 05h */
1144     U16                         Reserved1;                      /* 06h */
1145     IOC_4_SEP                   SEP[MPI_IOC_PAGE_4_SEP_MAX];    /* 08h */
1146 } CONFIG_PAGE_IOC_4, MPI_POINTER PTR_CONFIG_PAGE_IOC_4,
1147   IOCPage4_t, MPI_POINTER pIOCPage4_t;
1148
1149 #define MPI_IOCPAGE4_PAGEVERSION                        (0x00)
1150
1151
1152 typedef struct _IOC_5_HOT_SPARE
1153 {
1154     U8                          PhysDiskNum;            /* 00h */
1155     U8                          Reserved;               /* 01h */
1156     U8                          HotSparePool;           /* 02h */
1157     U8                          Flags;                   /* 03h */
1158 } IOC_5_HOT_SPARE, MPI_POINTER PTR_IOC_5_HOT_SPARE,
1159   Ioc5HotSpare_t, MPI_POINTER pIoc5HotSpare_t;
1160
1161 /* IOC Page 5 HotSpare Flags */
1162 #define MPI_IOC_PAGE_5_HOT_SPARE_ACTIVE                 (0x01)
1163
1164 /*
1165  * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
1166  * one and check Header.PageLength at runtime.
1167  */
1168 #ifndef MPI_IOC_PAGE_5_HOT_SPARE_MAX
1169 #define MPI_IOC_PAGE_5_HOT_SPARE_MAX        (1)
1170 #endif
1171
1172 typedef struct _CONFIG_PAGE_IOC_5
1173 {
1174     CONFIG_PAGE_HEADER          Header;                         /* 00h */
1175     U32                         Reserved1;                      /* 04h */
1176     U8                          NumHotSpares;                   /* 08h */
1177     U8                          Reserved2;                      /* 09h */
1178     U16                         Reserved3;                      /* 0Ah */
1179     IOC_5_HOT_SPARE             HotSpare[MPI_IOC_PAGE_5_HOT_SPARE_MAX]; /* 0Ch */
1180 } CONFIG_PAGE_IOC_5, MPI_POINTER PTR_CONFIG_PAGE_IOC_5,
1181   IOCPage5_t, MPI_POINTER pIOCPage5_t;
1182
1183 #define MPI_IOCPAGE5_PAGEVERSION                        (0x00)
1184
1185 typedef struct _CONFIG_PAGE_IOC_6
1186 {
1187     CONFIG_PAGE_HEADER          Header;                         /* 00h */
1188     U32                         CapabilitiesFlags;              /* 04h */
1189     U8                          MaxDrivesIS;                    /* 08h */
1190     U8                          MaxDrivesIM;                    /* 09h */
1191     U8                          MaxDrivesIME;                   /* 0Ah */
1192     U8                          Reserved1;                      /* 0Bh */
1193     U8                          MinDrivesIS;                    /* 0Ch */
1194     U8                          MinDrivesIM;                    /* 0Dh */
1195     U8                          MinDrivesIME;                   /* 0Eh */
1196     U8                          Reserved2;                      /* 0Fh */
1197     U8                          MaxGlobalHotSpares;             /* 10h */
1198     U8                          Reserved3;                      /* 11h */
1199     U16                         Reserved4;                      /* 12h */
1200     U32                         Reserved5;                      /* 14h */
1201     U32                         SupportedStripeSizeMapIS;       /* 18h */
1202     U32                         SupportedStripeSizeMapIME;      /* 1Ch */
1203     U32                         Reserved6;                      /* 20h */
1204     U8                          MetadataSize;                   /* 24h */
1205     U8                          Reserved7;                      /* 25h */
1206     U16                         Reserved8;                      /* 26h */
1207     U16                         MaxBadBlockTableEntries;        /* 28h */
1208     U16                         Reserved9;                      /* 2Ah */
1209     U16                         IRNvsramUsage;                  /* 2Ch */
1210     U16                         Reserved10;                     /* 2Eh */
1211     U32                         IRNvsramVersion;                /* 30h */
1212     U32                         Reserved11;                     /* 34h */
1213     U32                         Reserved12;                     /* 38h */
1214 } CONFIG_PAGE_IOC_6, MPI_POINTER PTR_CONFIG_PAGE_IOC_6,
1215   IOCPage6_t, MPI_POINTER pIOCPage6_t;
1216
1217 #define MPI_IOCPAGE6_PAGEVERSION                        (0x01)
1218
1219 /* IOC Page 6 Capabilities Flags */
1220
1221 #define MPI_IOCPAGE6_CAP_FLAGS_SSD_SUPPORT              (0x00000020)
1222 #define MPI_IOCPAGE6_CAP_FLAGS_MULTIPORT_DRIVE_SUPPORT  (0x00000010)
1223 #define MPI_IOCPAGE6_CAP_FLAGS_DISABLE_SMART_POLLING    (0x00000008)
1224
1225 #define MPI_IOCPAGE6_CAP_FLAGS_MASK_METADATA_SIZE       (0x00000006)
1226 #define MPI_IOCPAGE6_CAP_FLAGS_64MB_METADATA_SIZE       (0x00000000)
1227 #define MPI_IOCPAGE6_CAP_FLAGS_512MB_METADATA_SIZE      (0x00000002)
1228
1229 #define MPI_IOCPAGE6_CAP_FLAGS_GLOBAL_HOT_SPARE         (0x00000001)
1230
1231
1232 /****************************************************************************
1233 *   BIOS Config Pages
1234 ****************************************************************************/
1235
1236 typedef struct _CONFIG_PAGE_BIOS_1
1237 {
1238     CONFIG_PAGE_HEADER      Header;                     /* 00h */
1239     U32                     BiosOptions;                /* 04h */
1240     U32                     IOCSettings;                /* 08h */
1241     U32                     Reserved1;                  /* 0Ch */
1242     U32                     DeviceSettings;             /* 10h */
1243     U16                     NumberOfDevices;            /* 14h */
1244     U8                      ExpanderSpinup;             /* 16h */
1245     U8                      Reserved2;                  /* 17h */
1246     U16                     IOTimeoutBlockDevicesNonRM; /* 18h */
1247     U16                     IOTimeoutSequential;        /* 1Ah */
1248     U16                     IOTimeoutOther;             /* 1Ch */
1249     U16                     IOTimeoutBlockDevicesRM;    /* 1Eh */
1250 } CONFIG_PAGE_BIOS_1, MPI_POINTER PTR_CONFIG_PAGE_BIOS_1,
1251   BIOSPage1_t, MPI_POINTER pBIOSPage1_t;
1252
1253 #define MPI_BIOSPAGE1_PAGEVERSION                       (0x03)
1254
1255 /* values for the BiosOptions field */
1256 #define MPI_BIOSPAGE1_OPTIONS_SPI_ENABLE                (0x00000400)
1257 #define MPI_BIOSPAGE1_OPTIONS_FC_ENABLE                 (0x00000200)
1258 #define MPI_BIOSPAGE1_OPTIONS_SAS_ENABLE                (0x00000100)
1259
1260 #define MPI_BIOSPAGE1_OPTIONS_SCAN_HIGH_TO_LOW          (0x00000002)
1261 #define MPI_BIOSPAGE1_OPTIONS_SCAN_LOW_TO_HIGH          (0x00000000)
1262
1263 #define MPI_BIOSPAGE1_OPTIONS_DISABLE_BIOS              (0x00000001)
1264
1265 /* values for the IOCSettings field */
1266 #define MPI_BIOSPAGE1_IOCSET_MASK_INITIAL_SPINUP_DELAY  (0x0F000000)
1267 #define MPI_BIOSPAGE1_IOCSET_SHIFT_INITIAL_SPINUP_DELAY (24)
1268
1269 #define MPI_BIOSPAGE1_IOCSET_MASK_PORT_ENABLE_DELAY     (0x00F00000)
1270 #define MPI_BIOSPAGE1_IOCSET_SHIFT_PORT_ENABLE_DELAY    (20)
1271
1272 #define MPI_BIOSPAGE1_IOCSET_AUTO_PORT_ENABLE           (0x00080000)
1273 #define MPI_BIOSPAGE1_IOCSET_DIRECT_ATTACH_SPINUP_MODE  (0x00040000)
1274
1275 #define MPI_BIOSPAGE1_IOCSET_MASK_BOOT_PREFERENCE       (0x00030000)
1276 #define MPI_BIOSPAGE1_IOCSET_ENCLOSURE_SLOT_BOOT        (0x00000000)
1277 #define MPI_BIOSPAGE1_IOCSET_SAS_ADDRESS_BOOT           (0x00010000)
1278
1279 #define MPI_BIOSPAGE1_IOCSET_MASK_MAX_TARGET_SPIN_UP    (0x0000F000)
1280 #define MPI_BIOSPAGE1_IOCSET_SHIFT_MAX_TARGET_SPIN_UP   (12)
1281
1282 #define MPI_BIOSPAGE1_IOCSET_MASK_SPINUP_DELAY          (0x00000F00)
1283 #define MPI_BIOSPAGE1_IOCSET_SHIFT_SPINUP_DELAY         (8)
1284
1285 #define MPI_BIOSPAGE1_IOCSET_MASK_RM_SETTING            (0x000000C0)
1286 #define MPI_BIOSPAGE1_IOCSET_NONE_RM_SETTING            (0x00000000)
1287 #define MPI_BIOSPAGE1_IOCSET_BOOT_RM_SETTING            (0x00000040)
1288 #define MPI_BIOSPAGE1_IOCSET_MEDIA_RM_SETTING           (0x00000080)
1289
1290 #define MPI_BIOSPAGE1_IOCSET_MASK_ADAPTER_SUPPORT       (0x00000030)
1291 #define MPI_BIOSPAGE1_IOCSET_NO_SUPPORT                 (0x00000000)
1292 #define MPI_BIOSPAGE1_IOCSET_BIOS_SUPPORT               (0x00000010)
1293 #define MPI_BIOSPAGE1_IOCSET_OS_SUPPORT                 (0x00000020)
1294 #define MPI_BIOSPAGE1_IOCSET_ALL_SUPPORT                (0x00000030)
1295
1296 #define MPI_BIOSPAGE1_IOCSET_ALTERNATE_CHS              (0x00000008)
1297
1298 /* values for the DeviceSettings field */
1299 #define MPI_BIOSPAGE1_DEVSET_DISABLE_SMART_POLLING      (0x00000010)
1300 #define MPI_BIOSPAGE1_DEVSET_DISABLE_SEQ_LUN            (0x00000008)
1301 #define MPI_BIOSPAGE1_DEVSET_DISABLE_RM_LUN             (0x00000004)
1302 #define MPI_BIOSPAGE1_DEVSET_DISABLE_NON_RM_LUN         (0x00000002)
1303 #define MPI_BIOSPAGE1_DEVSET_DISABLE_OTHER_LUN          (0x00000001)
1304
1305 /* defines for the ExpanderSpinup field */
1306 #define MPI_BIOSPAGE1_EXPSPINUP_MASK_MAX_TARGET         (0xF0)
1307 #define MPI_BIOSPAGE1_EXPSPINUP_SHIFT_MAX_TARGET        (4)
1308 #define MPI_BIOSPAGE1_EXPSPINUP_MASK_DELAY              (0x0F)
1309
1310 typedef struct _MPI_BOOT_DEVICE_ADAPTER_ORDER
1311 {
1312     U32         Reserved1;                              /* 00h */
1313     U32         Reserved2;                              /* 04h */
1314     U32         Reserved3;                              /* 08h */
1315     U32         Reserved4;                              /* 0Ch */
1316     U32         Reserved5;                              /* 10h */
1317     U32         Reserved6;                              /* 14h */
1318     U32         Reserved7;                              /* 18h */
1319     U32         Reserved8;                              /* 1Ch */
1320     U32         Reserved9;                              /* 20h */
1321     U32         Reserved10;                             /* 24h */
1322     U32         Reserved11;                             /* 28h */
1323     U32         Reserved12;                             /* 2Ch */
1324     U32         Reserved13;                             /* 30h */
1325     U32         Reserved14;                             /* 34h */
1326     U32         Reserved15;                             /* 38h */
1327     U32         Reserved16;                             /* 3Ch */
1328     U32         Reserved17;                             /* 40h */
1329 } MPI_BOOT_DEVICE_ADAPTER_ORDER, MPI_POINTER PTR_MPI_BOOT_DEVICE_ADAPTER_ORDER;
1330
1331 typedef struct _MPI_BOOT_DEVICE_ADAPTER_NUMBER
1332 {
1333     U8          TargetID;                               /* 00h */
1334     U8          Bus;                                    /* 01h */
1335     U8          AdapterNumber;                          /* 02h */
1336     U8          Reserved1;                              /* 03h */
1337     U32         Reserved2;                              /* 04h */
1338     U32         Reserved3;                              /* 08h */
1339     U32         Reserved4;                              /* 0Ch */
1340     U8          LUN[8];                                 /* 10h */
1341     U32         Reserved5;                              /* 18h */
1342     U32         Reserved6;                              /* 1Ch */
1343     U32         Reserved7;                              /* 20h */
1344     U32         Reserved8;                              /* 24h */
1345     U32         Reserved9;                              /* 28h */
1346     U32         Reserved10;                             /* 2Ch */
1347     U32         Reserved11;                             /* 30h */
1348     U32         Reserved12;                             /* 34h */
1349     U32         Reserved13;                             /* 38h */
1350     U32         Reserved14;                             /* 3Ch */
1351     U32         Reserved15;                             /* 40h */
1352 } MPI_BOOT_DEVICE_ADAPTER_NUMBER, MPI_POINTER PTR_MPI_BOOT_DEVICE_ADAPTER_NUMBER;
1353
1354 typedef struct _MPI_BOOT_DEVICE_PCI_ADDRESS
1355 {
1356     U8          TargetID;                               /* 00h */
1357     U8          Bus;                                    /* 01h */
1358     U16         PCIAddress;                             /* 02h */
1359     U32         Reserved1;                              /* 04h */
1360     U32         Reserved2;                              /* 08h */
1361     U32         Reserved3;                              /* 0Ch */
1362     U8          LUN[8];                                 /* 10h */
1363     U32         Reserved4;                              /* 18h */
1364     U32         Reserved5;                              /* 1Ch */
1365     U32         Reserved6;                              /* 20h */
1366     U32         Reserved7;                              /* 24h */
1367     U32         Reserved8;                              /* 28h */
1368     U32         Reserved9;                              /* 2Ch */
1369     U32         Reserved10;                             /* 30h */
1370     U32         Reserved11;                             /* 34h */
1371     U32         Reserved12;                             /* 38h */
1372     U32         Reserved13;                             /* 3Ch */
1373     U32         Reserved14;                             /* 40h */
1374 } MPI_BOOT_DEVICE_PCI_ADDRESS, MPI_POINTER PTR_MPI_BOOT_DEVICE_PCI_ADDRESS;
1375
1376 typedef struct _MPI_BOOT_DEVICE_SLOT_NUMBER
1377 {
1378     U8          TargetID;                               /* 00h */
1379     U8          Bus;                                    /* 01h */
1380     U8          PCISlotNumber;                          /* 02h */
1381     U8          Reserved1;                              /* 03h */
1382     U32         Reserved2;                              /* 04h */
1383     U32         Reserved3;                              /* 08h */
1384     U32         Reserved4;                              /* 0Ch */
1385     U8          LUN[8];                                 /* 10h */
1386     U32         Reserved5;                              /* 18h */
1387     U32         Reserved6;                              /* 1Ch */
1388     U32         Reserved7;                              /* 20h */
1389     U32         Reserved8;                              /* 24h */
1390     U32         Reserved9;                              /* 28h */
1391     U32         Reserved10;                             /* 2Ch */
1392     U32         Reserved11;                             /* 30h */
1393     U32         Reserved12;                             /* 34h */
1394     U32         Reserved13;                             /* 38h */
1395     U32         Reserved14;                             /* 3Ch */
1396     U32         Reserved15;                             /* 40h */
1397 } MPI_BOOT_DEVICE_PCI_SLOT_NUMBER, MPI_POINTER PTR_MPI_BOOT_DEVICE_PCI_SLOT_NUMBER;
1398
1399 typedef struct _MPI_BOOT_DEVICE_FC_WWN
1400 {
1401     U64         WWPN;                                   /* 00h */
1402     U32         Reserved1;                              /* 08h */
1403     U32         Reserved2;                              /* 0Ch */
1404     U8          LUN[8];                                 /* 10h */
1405     U32         Reserved3;                              /* 18h */
1406     U32         Reserved4;                              /* 1Ch */
1407     U32         Reserved5;                              /* 20h */
1408     U32         Reserved6;                              /* 24h */
1409     U32         Reserved7;                              /* 28h */
1410     U32         Reserved8;                              /* 2Ch */
1411     U32         Reserved9;                              /* 30h */
1412     U32         Reserved10;                             /* 34h */
1413     U32         Reserved11;                             /* 38h */
1414     U32         Reserved12;                             /* 3Ch */
1415     U32         Reserved13;                             /* 40h */
1416 } MPI_BOOT_DEVICE_FC_WWN, MPI_POINTER PTR_MPI_BOOT_DEVICE_FC_WWN;
1417
1418 typedef struct _MPI_BOOT_DEVICE_SAS_WWN
1419 {
1420     U64         SASAddress;                             /* 00h */
1421     U32         Reserved1;                              /* 08h */
1422     U32         Reserved2;                              /* 0Ch */
1423     U8          LUN[8];                                 /* 10h */
1424     U32         Reserved3;                              /* 18h */
1425     U32         Reserved4;                              /* 1Ch */
1426     U32         Reserved5;                              /* 20h */
1427     U32         Reserved6;                              /* 24h */
1428     U32         Reserved7;                              /* 28h */
1429     U32         Reserved8;                              /* 2Ch */
1430     U32         Reserved9;                              /* 30h */
1431     U32         Reserved10;                             /* 34h */
1432     U32         Reserved11;                             /* 38h */
1433     U32         Reserved12;                             /* 3Ch */
1434     U32         Reserved13;                             /* 40h */
1435 } MPI_BOOT_DEVICE_SAS_WWN, MPI_POINTER PTR_MPI_BOOT_DEVICE_SAS_WWN;
1436
1437 typedef struct _MPI_BOOT_DEVICE_ENCLOSURE_SLOT
1438 {
1439     U64         EnclosureLogicalID;                     /* 00h */
1440     U32         Reserved1;                              /* 08h */
1441     U32         Reserved2;                              /* 0Ch */
1442     U8          LUN[8];                                 /* 10h */
1443     U16         SlotNumber;                             /* 18h */
1444     U16         Reserved3;                              /* 1Ah */
1445     U32         Reserved4;                              /* 1Ch */
1446     U32         Reserved5;                              /* 20h */
1447     U32         Reserved6;                              /* 24h */
1448     U32         Reserved7;                              /* 28h */
1449     U32         Reserved8;                              /* 2Ch */
1450     U32         Reserved9;                              /* 30h */
1451     U32         Reserved10;                             /* 34h */
1452     U32         Reserved11;                             /* 38h */
1453     U32         Reserved12;                             /* 3Ch */
1454     U32         Reserved13;                             /* 40h */
1455 } MPI_BOOT_DEVICE_ENCLOSURE_SLOT,
1456   MPI_POINTER PTR_MPI_BOOT_DEVICE_ENCLOSURE_SLOT;
1457
1458 typedef union _MPI_BIOSPAGE2_BOOT_DEVICE
1459 {
1460     MPI_BOOT_DEVICE_ADAPTER_ORDER   AdapterOrder;
1461     MPI_BOOT_DEVICE_ADAPTER_NUMBER  AdapterNumber;
1462     MPI_BOOT_DEVICE_PCI_ADDRESS     PCIAddress;
1463     MPI_BOOT_DEVICE_PCI_SLOT_NUMBER PCISlotNumber;
1464     MPI_BOOT_DEVICE_FC_WWN          FcWwn;
1465     MPI_BOOT_DEVICE_SAS_WWN         SasWwn;
1466     MPI_BOOT_DEVICE_ENCLOSURE_SLOT  EnclosureSlot;
1467 } MPI_BIOSPAGE2_BOOT_DEVICE, MPI_POINTER PTR_MPI_BIOSPAGE2_BOOT_DEVICE;
1468
1469 typedef struct _CONFIG_PAGE_BIOS_2
1470 {
1471     CONFIG_PAGE_HEADER          Header;                 /* 00h */
1472     U32                         Reserved1;              /* 04h */
1473     U32                         Reserved2;              /* 08h */
1474     U32                         Reserved3;              /* 0Ch */
1475     U32                         Reserved4;              /* 10h */
1476     U32                         Reserved5;              /* 14h */
1477     U32                         Reserved6;              /* 18h */
1478     U8                          BootDeviceForm;         /* 1Ch */
1479     U8                          PrevBootDeviceForm;     /* 1Ch */
1480     U16                         Reserved8;              /* 1Eh */
1481     MPI_BIOSPAGE2_BOOT_DEVICE   BootDevice;             /* 20h */
1482 } CONFIG_PAGE_BIOS_2, MPI_POINTER PTR_CONFIG_PAGE_BIOS_2,
1483   BIOSPage2_t, MPI_POINTER pBIOSPage2_t;
1484
1485 #define MPI_BIOSPAGE2_PAGEVERSION                       (0x02)
1486
1487 #define MPI_BIOSPAGE2_FORM_MASK                         (0x0F)
1488 #define MPI_BIOSPAGE2_FORM_ADAPTER_ORDER                (0x00)
1489 #define MPI_BIOSPAGE2_FORM_ADAPTER_NUMBER               (0x01)
1490 #define MPI_BIOSPAGE2_FORM_PCI_ADDRESS                  (0x02)
1491 #define MPI_BIOSPAGE2_FORM_PCI_SLOT_NUMBER              (0x03)
1492 #define MPI_BIOSPAGE2_FORM_FC_WWN                       (0x04)
1493 #define MPI_BIOSPAGE2_FORM_SAS_WWN                      (0x05)
1494 #define MPI_BIOSPAGE2_FORM_ENCLOSURE_SLOT               (0x06)
1495
1496 typedef struct _CONFIG_PAGE_BIOS_4
1497 {
1498     CONFIG_PAGE_HEADER      Header;                     /* 00h */
1499     U64                     ReassignmentBaseWWID;       /* 04h */
1500 } CONFIG_PAGE_BIOS_4, MPI_POINTER PTR_CONFIG_PAGE_BIOS_4,
1501   BIOSPage4_t, MPI_POINTER pBIOSPage4_t;
1502
1503 #define MPI_BIOSPAGE4_PAGEVERSION                       (0x00)
1504
1505
1506 /****************************************************************************
1507 *   SCSI Port Config Pages
1508 ****************************************************************************/
1509
1510 typedef struct _CONFIG_PAGE_SCSI_PORT_0
1511 {
1512     CONFIG_PAGE_HEADER      Header;                     /* 00h */
1513     U32                     Capabilities;               /* 04h */
1514     U32                     PhysicalInterface;          /* 08h */
1515 } CONFIG_PAGE_SCSI_PORT_0, MPI_POINTER PTR_CONFIG_PAGE_SCSI_PORT_0,
1516   SCSIPortPage0_t, MPI_POINTER pSCSIPortPage0_t;
1517
1518 #define MPI_SCSIPORTPAGE0_PAGEVERSION                   (0x02)
1519
1520 #define MPI_SCSIPORTPAGE0_CAP_IU                        (0x00000001)
1521 #define MPI_SCSIPORTPAGE0_CAP_DT                        (0x00000002)
1522 #define MPI_SCSIPORTPAGE0_CAP_QAS                       (0x00000004)
1523 #define MPI_SCSIPORTPAGE0_CAP_MIN_SYNC_PERIOD_MASK      (0x0000FF00)
1524 #define MPI_SCSIPORTPAGE0_SYNC_ASYNC                    (0x00)
1525 #define MPI_SCSIPORTPAGE0_SYNC_5                        (0x32)
1526 #define MPI_SCSIPORTPAGE0_SYNC_10                       (0x19)
1527 #define MPI_SCSIPORTPAGE0_SYNC_20                       (0x0C)
1528 #define MPI_SCSIPORTPAGE0_SYNC_33_33                    (0x0B)
1529 #define MPI_SCSIPORTPAGE0_SYNC_40                       (0x0A)
1530 #define MPI_SCSIPORTPAGE0_SYNC_80                       (0x09)
1531 #define MPI_SCSIPORTPAGE0_SYNC_160                      (0x08)
1532 #define MPI_SCSIPORTPAGE0_SYNC_UNKNOWN                  (0xFF)
1533
1534 #define MPI_SCSIPORTPAGE0_CAP_SHIFT_MIN_SYNC_PERIOD     (8)
1535 #define MPI_SCSIPORTPAGE0_CAP_GET_MIN_SYNC_PERIOD(Cap)      \
1536     (  ((Cap) & MPI_SCSIPORTPAGE0_CAP_MIN_SYNC_PERIOD_MASK) \
1537     >> MPI_SCSIPORTPAGE0_CAP_SHIFT_MIN_SYNC_PERIOD          \
1538     )
1539 #define MPI_SCSIPORTPAGE0_CAP_MAX_SYNC_OFFSET_MASK      (0x00FF0000)
1540 #define MPI_SCSIPORTPAGE0_CAP_SHIFT_MAX_SYNC_OFFSET     (16)
1541 #define MPI_SCSIPORTPAGE0_CAP_GET_MAX_SYNC_OFFSET(Cap)      \
1542     (  ((Cap) & MPI_SCSIPORTPAGE0_CAP_MAX_SYNC_OFFSET_MASK) \
1543     >> MPI_SCSIPORTPAGE0_CAP_SHIFT_MAX_SYNC_OFFSET          \
1544     )
1545 #define MPI_SCSIPORTPAGE0_CAP_IDP                       (0x08000000)
1546 #define MPI_SCSIPORTPAGE0_CAP_WIDE                      (0x20000000)
1547 #define MPI_SCSIPORTPAGE0_CAP_AIP                       (0x80000000)
1548
1549 #define MPI_SCSIPORTPAGE0_PHY_SIGNAL_TYPE_MASK          (0x00000003)
1550 #define MPI_SCSIPORTPAGE0_PHY_SIGNAL_HVD                (0x01)
1551 #define MPI_SCSIPORTPAGE0_PHY_SIGNAL_SE                 (0x02)
1552 #define MPI_SCSIPORTPAGE0_PHY_SIGNAL_LVD                (0x03)
1553 #define MPI_SCSIPORTPAGE0_PHY_MASK_CONNECTED_ID         (0xFF000000)
1554 #define MPI_SCSIPORTPAGE0_PHY_SHIFT_CONNECTED_ID        (24)
1555 #define MPI_SCSIPORTPAGE0_PHY_BUS_FREE_CONNECTED_ID     (0xFE)
1556 #define MPI_SCSIPORTPAGE0_PHY_UNKNOWN_CONNECTED_ID      (0xFF)
1557
1558
1559 typedef struct _CONFIG_PAGE_SCSI_PORT_1
1560 {
1561     CONFIG_PAGE_HEADER      Header;                     /* 00h */
1562     U32                     Configuration;              /* 04h */
1563     U32                     OnBusTimerValue;            /* 08h */
1564     U8                      TargetConfig;               /* 0Ch */
1565     U8                      Reserved1;                  /* 0Dh */
1566     U16                     IDConfig;                   /* 0Eh */
1567 } CONFIG_PAGE_SCSI_PORT_1, MPI_POINTER PTR_CONFIG_PAGE_SCSI_PORT_1,
1568   SCSIPortPage1_t, MPI_POINTER pSCSIPortPage1_t;
1569
1570 #define MPI_SCSIPORTPAGE1_PAGEVERSION                   (0x03)
1571
1572 /* Configuration values */
1573 #define MPI_SCSIPORTPAGE1_CFG_PORT_SCSI_ID_MASK         (0x000000FF)
1574 #define MPI_SCSIPORTPAGE1_CFG_PORT_RESPONSE_ID_MASK     (0xFFFF0000)
1575 #define MPI_SCSIPORTPAGE1_CFG_SHIFT_PORT_RESPONSE_ID    (16)
1576
1577 /* TargetConfig values */
1578 #define MPI_SCSIPORTPAGE1_TARGCONFIG_TARG_ONLY        (0x01)
1579 #define MPI_SCSIPORTPAGE1_TARGCONFIG_INIT_TARG        (0x02)
1580
1581
1582 typedef struct _MPI_DEVICE_INFO
1583 {
1584     U8      Timeout;                                    /* 00h */
1585     U8      SyncFactor;                                 /* 01h */
1586     U16     DeviceFlags;                                /* 02h */
1587 } MPI_DEVICE_INFO, MPI_POINTER PTR_MPI_DEVICE_INFO,
1588   MpiDeviceInfo_t, MPI_POINTER pMpiDeviceInfo_t;
1589
1590 typedef struct _CONFIG_PAGE_SCSI_PORT_2
1591 {
1592     CONFIG_PAGE_HEADER  Header;                         /* 00h */
1593     U32                 PortFlags;                      /* 04h */
1594     U32                 PortSettings;                   /* 08h */
1595     MPI_DEVICE_INFO     DeviceSettings[16];             /* 0Ch */
1596 } CONFIG_PAGE_SCSI_PORT_2, MPI_POINTER PTR_CONFIG_PAGE_SCSI_PORT_2,
1597   SCSIPortPage2_t, MPI_POINTER pSCSIPortPage2_t;
1598
1599 #define MPI_SCSIPORTPAGE2_PAGEVERSION                       (0x02)
1600
1601 /* PortFlags values */
1602 #define MPI_SCSIPORTPAGE2_PORT_FLAGS_SCAN_HIGH_TO_LOW       (0x00000001)
1603 #define MPI_SCSIPORTPAGE2_PORT_FLAGS_AVOID_SCSI_RESET       (0x00000004)
1604 #define MPI_SCSIPORTPAGE2_PORT_FLAGS_ALTERNATE_CHS          (0x00000008)
1605 #define MPI_SCSIPORTPAGE2_PORT_FLAGS_TERMINATION_DISABLE    (0x00000010)
1606
1607 #define MPI_SCSIPORTPAGE2_PORT_FLAGS_DV_MASK                (0x00000060)
1608 #define MPI_SCSIPORTPAGE2_PORT_FLAGS_FULL_DV                (0x00000000)
1609 #define MPI_SCSIPORTPAGE2_PORT_FLAGS_BASIC_DV_ONLY          (0x00000020)
1610 #define MPI_SCSIPORTPAGE2_PORT_FLAGS_OFF_DV                 (0x00000060)
1611
1612
1613 /* PortSettings values */
1614 #define MPI_SCSIPORTPAGE2_PORT_HOST_ID_MASK                 (0x0000000F)
1615 #define MPI_SCSIPORTPAGE2_PORT_MASK_INIT_HBA                (0x00000030)
1616 #define MPI_SCSIPORTPAGE2_PORT_DISABLE_INIT_HBA             (0x00000000)
1617 #define MPI_SCSIPORTPAGE2_PORT_BIOS_INIT_HBA                (0x00000010)
1618 #define MPI_SCSIPORTPAGE2_PORT_OS_INIT_HBA                  (0x00000020)
1619 #define MPI_SCSIPORTPAGE2_PORT_BIOS_OS_INIT_HBA             (0x00000030)
1620 #define MPI_SCSIPORTPAGE2_PORT_REMOVABLE_MEDIA              (0x000000C0)
1621 #define MPI_SCSIPORTPAGE2_PORT_RM_NONE                      (0x00000000)
1622 #define MPI_SCSIPORTPAGE2_PORT_RM_BOOT_ONLY                 (0x00000040)
1623 #define MPI_SCSIPORTPAGE2_PORT_RM_WITH_MEDIA                (0x00000080)
1624 #define MPI_SCSIPORTPAGE2_PORT_SPINUP_DELAY_MASK            (0x00000F00)
1625 #define MPI_SCSIPORTPAGE2_PORT_SHIFT_SPINUP_DELAY           (8)
1626 #define MPI_SCSIPORTPAGE2_PORT_MASK_NEGO_MASTER_SETTINGS    (0x00003000)
1627 #define MPI_SCSIPORTPAGE2_PORT_NEGO_MASTER_SETTINGS         (0x00000000)
1628 #define MPI_SCSIPORTPAGE2_PORT_NONE_MASTER_SETTINGS         (0x00001000)
1629 #define MPI_SCSIPORTPAGE2_PORT_ALL_MASTER_SETTINGS          (0x00003000)
1630
1631 #define MPI_SCSIPORTPAGE2_DEVICE_DISCONNECT_ENABLE          (0x0001)
1632 #define MPI_SCSIPORTPAGE2_DEVICE_ID_SCAN_ENABLE             (0x0002)
1633 #define MPI_SCSIPORTPAGE2_DEVICE_LUN_SCAN_ENABLE            (0x0004)
1634 #define MPI_SCSIPORTPAGE2_DEVICE_TAG_QUEUE_ENABLE           (0x0008)
1635 #define MPI_SCSIPORTPAGE2_DEVICE_WIDE_DISABLE               (0x0010)
1636 #define MPI_SCSIPORTPAGE2_DEVICE_BOOT_CHOICE                (0x0020)
1637
1638
1639 /****************************************************************************
1640 *   SCSI Target Device Config Pages
1641 ****************************************************************************/
1642
1643 typedef struct _CONFIG_PAGE_SCSI_DEVICE_0
1644 {
1645     CONFIG_PAGE_HEADER      Header;                     /* 00h */
1646     U32                     NegotiatedParameters;       /* 04h */
1647     U32                     Information;                /* 08h */
1648 } CONFIG_PAGE_SCSI_DEVICE_0, MPI_POINTER PTR_CONFIG_PAGE_SCSI_DEVICE_0,
1649   SCSIDevicePage0_t, MPI_POINTER pSCSIDevicePage0_t;
1650
1651 #define MPI_SCSIDEVPAGE0_PAGEVERSION                    (0x04)
1652
1653 #define MPI_SCSIDEVPAGE0_NP_IU                          (0x00000001)
1654 #define MPI_SCSIDEVPAGE0_NP_DT                          (0x00000002)
1655 #define MPI_SCSIDEVPAGE0_NP_QAS                         (0x00000004)
1656 #define MPI_SCSIDEVPAGE0_NP_HOLD_MCS                    (0x00000008)
1657 #define MPI_SCSIDEVPAGE0_NP_WR_FLOW                     (0x00000010)
1658 #define MPI_SCSIDEVPAGE0_NP_RD_STRM                     (0x00000020)
1659 #define MPI_SCSIDEVPAGE0_NP_RTI                         (0x00000040)
1660 #define MPI_SCSIDEVPAGE0_NP_PCOMP_EN                    (0x00000080)
1661 #define MPI_SCSIDEVPAGE0_NP_NEG_SYNC_PERIOD_MASK        (0x0000FF00)
1662 #define MPI_SCSIDEVPAGE0_NP_SHIFT_SYNC_PERIOD           (8)
1663 #define MPI_SCSIDEVPAGE0_NP_NEG_SYNC_OFFSET_MASK        (0x00FF0000)
1664 #define MPI_SCSIDEVPAGE0_NP_SHIFT_SYNC_OFFSET           (16)
1665 #define MPI_SCSIDEVPAGE0_NP_IDP                         (0x08000000)
1666 #define MPI_SCSIDEVPAGE0_NP_WIDE                        (0x20000000)
1667 #define MPI_SCSIDEVPAGE0_NP_AIP                         (0x80000000)
1668
1669 #define MPI_SCSIDEVPAGE0_INFO_PARAMS_NEGOTIATED         (0x00000001)
1670 #define MPI_SCSIDEVPAGE0_INFO_SDTR_REJECTED             (0x00000002)
1671 #define MPI_SCSIDEVPAGE0_INFO_WDTR_REJECTED             (0x00000004)
1672 #define MPI_SCSIDEVPAGE0_INFO_PPR_REJECTED              (0x00000008)
1673
1674
1675 typedef struct _CONFIG_PAGE_SCSI_DEVICE_1
1676 {
1677     CONFIG_PAGE_HEADER      Header;                     /* 00h */
1678     U32                     RequestedParameters;        /* 04h */
1679     U32                     Reserved;                   /* 08h */
1680     U32                     Configuration;              /* 0Ch */
1681 } CONFIG_PAGE_SCSI_DEVICE_1, MPI_POINTER PTR_CONFIG_PAGE_SCSI_DEVICE_1,
1682   SCSIDevicePage1_t, MPI_POINTER pSCSIDevicePage1_t;
1683
1684 #define MPI_SCSIDEVPAGE1_PAGEVERSION                    (0x05)
1685
1686 #define MPI_SCSIDEVPAGE1_RP_IU                          (0x00000001)
1687 #define MPI_SCSIDEVPAGE1_RP_DT                          (0x00000002)
1688 #define MPI_SCSIDEVPAGE1_RP_QAS                         (0x00000004)
1689 #define MPI_SCSIDEVPAGE1_RP_HOLD_MCS                    (0x00000008)
1690 #define MPI_SCSIDEVPAGE1_RP_WR_FLOW                     (0x00000010)
1691 #define MPI_SCSIDEVPAGE1_RP_RD_STRM                     (0x00000020)
1692 #define MPI_SCSIDEVPAGE1_RP_RTI                         (0x00000040)
1693 #define MPI_SCSIDEVPAGE1_RP_PCOMP_EN                    (0x00000080)
1694 #define MPI_SCSIDEVPAGE1_RP_MIN_SYNC_PERIOD_MASK        (0x0000FF00)
1695 #define MPI_SCSIDEVPAGE1_RP_SHIFT_MIN_SYNC_PERIOD       (8)
1696 #define MPI_SCSIDEVPAGE1_RP_MAX_SYNC_OFFSET_MASK        (0x00FF0000)
1697 #define MPI_SCSIDEVPAGE1_RP_SHIFT_MAX_SYNC_OFFSET       (16)
1698 #define MPI_SCSIDEVPAGE1_RP_IDP                         (0x08000000)
1699 #define MPI_SCSIDEVPAGE1_RP_WIDE                        (0x20000000)
1700 #define MPI_SCSIDEVPAGE1_RP_AIP                         (0x80000000)
1701
1702 #define MPI_SCSIDEVPAGE1_CONF_WDTR_DISALLOWED           (0x00000002)
1703 #define MPI_SCSIDEVPAGE1_CONF_SDTR_DISALLOWED           (0x00000004)
1704 #define MPI_SCSIDEVPAGE1_CONF_EXTENDED_PARAMS_ENABLE    (0x00000008)
1705 #define MPI_SCSIDEVPAGE1_CONF_FORCE_PPR_MSG             (0x00000010)
1706
1707
1708 typedef struct _CONFIG_PAGE_SCSI_DEVICE_2
1709 {
1710     CONFIG_PAGE_HEADER      Header;                     /* 00h */
1711     U32                     DomainValidation;           /* 04h */
1712     U32                     ParityPipeSelect;           /* 08h */
1713     U32                     DataPipeSelect;             /* 0Ch */
1714 } CONFIG_PAGE_SCSI_DEVICE_2, MPI_POINTER PTR_CONFIG_PAGE_SCSI_DEVICE_2,
1715   SCSIDevicePage2_t, MPI_POINTER pSCSIDevicePage2_t;
1716
1717 #define MPI_SCSIDEVPAGE2_PAGEVERSION                    (0x01)
1718
1719 #define MPI_SCSIDEVPAGE2_DV_ISI_ENABLE                  (0x00000010)
1720 #define MPI_SCSIDEVPAGE2_DV_SECONDARY_DRIVER_ENABLE     (0x00000020)
1721 #define MPI_SCSIDEVPAGE2_DV_SLEW_RATE_CTRL              (0x00000380)
1722 #define MPI_SCSIDEVPAGE2_DV_PRIM_DRIVE_STR_CTRL         (0x00001C00)
1723 #define MPI_SCSIDEVPAGE2_DV_SECOND_DRIVE_STR_CTRL       (0x0000E000)
1724 #define MPI_SCSIDEVPAGE2_DV_XCLKH_ST                    (0x10000000)
1725 #define MPI_SCSIDEVPAGE2_DV_XCLKS_ST                    (0x20000000)
1726 #define MPI_SCSIDEVPAGE2_DV_XCLKH_DT                    (0x40000000)
1727 #define MPI_SCSIDEVPAGE2_DV_XCLKS_DT                    (0x80000000)
1728
1729 #define MPI_SCSIDEVPAGE2_PPS_PPS_MASK                   (0x00000003)
1730
1731 #define MPI_SCSIDEVPAGE2_DPS_BIT_0_PL_SELECT_MASK       (0x00000003)
1732 #define MPI_SCSIDEVPAGE2_DPS_BIT_1_PL_SELECT_MASK       (0x0000000C)
1733 #define MPI_SCSIDEVPAGE2_DPS_BIT_2_PL_SELECT_MASK       (0x00000030)
1734 #define MPI_SCSIDEVPAGE2_DPS_BIT_3_PL_SELECT_MASK       (0x000000C0)
1735 #define MPI_SCSIDEVPAGE2_DPS_BIT_4_PL_SELECT_MASK       (0x00000300)
1736 #define MPI_SCSIDEVPAGE2_DPS_BIT_5_PL_SELECT_MASK       (0x00000C00)
1737 #define MPI_SCSIDEVPAGE2_DPS_BIT_6_PL_SELECT_MASK       (0x00003000)
1738 #define MPI_SCSIDEVPAGE2_DPS_BIT_7_PL_SELECT_MASK       (0x0000C000)
1739 #define MPI_SCSIDEVPAGE2_DPS_BIT_8_PL_SELECT_MASK       (0x00030000)
1740 #define MPI_SCSIDEVPAGE2_DPS_BIT_9_PL_SELECT_MASK       (0x000C0000)
1741 #define MPI_SCSIDEVPAGE2_DPS_BIT_10_PL_SELECT_MASK      (0x00300000)
1742 #define MPI_SCSIDEVPAGE2_DPS_BIT_11_PL_SELECT_MASK      (0x00C00000)
1743 #define MPI_SCSIDEVPAGE2_DPS_BIT_12_PL_SELECT_MASK      (0x03000000)
1744 #define MPI_SCSIDEVPAGE2_DPS_BIT_13_PL_SELECT_MASK      (0x0C000000)
1745 #define MPI_SCSIDEVPAGE2_DPS_BIT_14_PL_SELECT_MASK      (0x30000000)
1746 #define MPI_SCSIDEVPAGE2_DPS_BIT_15_PL_SELECT_MASK      (0xC0000000)
1747
1748
1749 typedef struct _CONFIG_PAGE_SCSI_DEVICE_3
1750 {
1751     CONFIG_PAGE_HEADER      Header;                     /* 00h */
1752     U16                     MsgRejectCount;             /* 04h */
1753     U16                     PhaseErrorCount;            /* 06h */
1754     U16                     ParityErrorCount;           /* 08h */
1755     U16                     Reserved;                   /* 0Ah */
1756 } CONFIG_PAGE_SCSI_DEVICE_3, MPI_POINTER PTR_CONFIG_PAGE_SCSI_DEVICE_3,
1757   SCSIDevicePage3_t, MPI_POINTER pSCSIDevicePage3_t;
1758
1759 #define MPI_SCSIDEVPAGE3_PAGEVERSION                    (0x00)
1760
1761 #define MPI_SCSIDEVPAGE3_MAX_COUNTER                    (0xFFFE)
1762 #define MPI_SCSIDEVPAGE3_UNSUPPORTED_COUNTER            (0xFFFF)
1763
1764
1765 /****************************************************************************
1766 *   FC Port Config Pages
1767 ****************************************************************************/
1768
1769 typedef struct _CONFIG_PAGE_FC_PORT_0
1770 {
1771     CONFIG_PAGE_HEADER      Header;                     /* 00h */
1772     U32                     Flags;                      /* 04h */
1773     U8                      MPIPortNumber;              /* 08h */
1774     U8                      LinkType;                   /* 09h */
1775     U8                      PortState;                  /* 0Ah */
1776     U8                      Reserved;                   /* 0Bh */
1777     U32                     PortIdentifier;             /* 0Ch */
1778     U64                     WWNN;                       /* 10h */
1779     U64                     WWPN;                       /* 18h */
1780     U32                     SupportedServiceClass;      /* 20h */
1781     U32                     SupportedSpeeds;            /* 24h */
1782     U32                     CurrentSpeed;               /* 28h */
1783     U32                     MaxFrameSize;               /* 2Ch */
1784     U64                     FabricWWNN;                 /* 30h */
1785     U64                     FabricWWPN;                 /* 38h */
1786     U32                     DiscoveredPortsCount;       /* 40h */
1787     U32                     MaxInitiators;              /* 44h */
1788     U8                      MaxAliasesSupported;        /* 48h */
1789     U8                      MaxHardAliasesSupported;    /* 49h */
1790     U8                      NumCurrentAliases;          /* 4Ah */
1791     U8                      Reserved1;                  /* 4Bh */
1792 } CONFIG_PAGE_FC_PORT_0, MPI_POINTER PTR_CONFIG_PAGE_FC_PORT_0,
1793   FCPortPage0_t, MPI_POINTER pFCPortPage0_t;
1794
1795 #define MPI_FCPORTPAGE0_PAGEVERSION                     (0x02)
1796
1797 #define MPI_FCPORTPAGE0_FLAGS_PROT_MASK                 (0x0000000F)
1798 #define MPI_FCPORTPAGE0_FLAGS_PROT_FCP_INIT             (MPI_PORTFACTS_PROTOCOL_INITIATOR)
1799 #define MPI_FCPORTPAGE0_FLAGS_PROT_FCP_TARG             (MPI_PORTFACTS_PROTOCOL_TARGET)
1800 #define MPI_FCPORTPAGE0_FLAGS_PROT_LAN                  (MPI_PORTFACTS_PROTOCOL_LAN)
1801 #define MPI_FCPORTPAGE0_FLAGS_PROT_LOGBUSADDR           (MPI_PORTFACTS_PROTOCOL_LOGBUSADDR)
1802
1803 #define MPI_FCPORTPAGE0_FLAGS_ALIAS_ALPA_SUPPORTED      (0x00000010)
1804 #define MPI_FCPORTPAGE0_FLAGS_ALIAS_WWN_SUPPORTED       (0x00000020)
1805 #define MPI_FCPORTPAGE0_FLAGS_FABRIC_WWN_VALID          (0x00000040)
1806
1807 #define MPI_FCPORTPAGE0_FLAGS_ATTACH_TYPE_MASK          (0x00000F00)
1808 #define MPI_FCPORTPAGE0_FLAGS_ATTACH_NO_INIT            (0x00000000)
1809 #define MPI_FCPORTPAGE0_FLAGS_ATTACH_POINT_TO_POINT     (0x00000100)
1810 #define MPI_FCPORTPAGE0_FLAGS_ATTACH_PRIVATE_LOOP       (0x00000200)
1811 #define MPI_FCPORTPAGE0_FLAGS_ATTACH_FABRIC_DIRECT      (0x00000400)
1812 #define MPI_FCPORTPAGE0_FLAGS_ATTACH_PUBLIC_LOOP        (0x00000800)
1813
1814 #define MPI_FCPORTPAGE0_LTYPE_RESERVED                  (0x00)
1815 #define MPI_FCPORTPAGE0_LTYPE_OTHER                     (0x01)
1816 #define MPI_FCPORTPAGE0_LTYPE_UNKNOWN                   (0x02)
1817 #define MPI_FCPORTPAGE0_LTYPE_COPPER                    (0x03)
1818 #define MPI_FCPORTPAGE0_LTYPE_SINGLE_1300               (0x04)
1819 #define MPI_FCPORTPAGE0_LTYPE_SINGLE_1500               (0x05)
1820 #define MPI_FCPORTPAGE0_LTYPE_50_LASER_MULTI            (0x06)
1821 #define MPI_FCPORTPAGE0_LTYPE_50_LED_MULTI              (0x07)
1822 #define MPI_FCPORTPAGE0_LTYPE_62_LASER_MULTI            (0x08)
1823 #define MPI_FCPORTPAGE0_LTYPE_62_LED_MULTI              (0x09)
1824 #define MPI_FCPORTPAGE0_LTYPE_MULTI_LONG_WAVE           (0x0A)
1825 #define MPI_FCPORTPAGE0_LTYPE_MULTI_SHORT_WAVE          (0x0B)
1826 #define MPI_FCPORTPAGE0_LTYPE_LASER_SHORT_WAVE          (0x0C)
1827 #define MPI_FCPORTPAGE0_LTYPE_LED_SHORT_WAVE            (0x0D)
1828 #define MPI_FCPORTPAGE0_LTYPE_1300_LONG_WAVE            (0x0E)
1829 #define MPI_FCPORTPAGE0_LTYPE_1500_LONG_WAVE            (0x0F)
1830
1831 #define MPI_FCPORTPAGE0_PORTSTATE_UNKNOWN               (0x01)      /*(SNIA)HBA_PORTSTATE_UNKNOWN       1 Unknown */
1832 #define MPI_FCPORTPAGE0_PORTSTATE_ONLINE                (0x02)      /*(SNIA)HBA_PORTSTATE_ONLINE        2 Operational */
1833 #define MPI_FCPORTPAGE0_PORTSTATE_OFFLINE               (0x03)      /*(SNIA)HBA_PORTSTATE_OFFLINE       3 User Offline */
1834 #define MPI_FCPORTPAGE0_PORTSTATE_BYPASSED              (0x04)      /*(SNIA)HBA_PORTSTATE_BYPASSED      4 Bypassed */
1835 #define MPI_FCPORTPAGE0_PORTSTATE_DIAGNOST              (0x05)      /*(SNIA)HBA_PORTSTATE_DIAGNOSTICS   5 In diagnostics mode */
1836 #define MPI_FCPORTPAGE0_PORTSTATE_LINKDOWN              (0x06)      /*(SNIA)HBA_PORTSTATE_LINKDOWN      6 Link Down */
1837 #define MPI_FCPORTPAGE0_PORTSTATE_ERROR                 (0x07)      /*(SNIA)HBA_PORTSTATE_ERROR         7 Port Error */
1838 #define MPI_FCPORTPAGE0_PORTSTATE_LOOPBACK              (0x08)      /*(SNIA)HBA_PORTSTATE_LOOPBACK      8 Loopback */
1839
1840 #define MPI_FCPORTPAGE0_SUPPORT_CLASS_1                 (0x00000001)
1841 #define MPI_FCPORTPAGE0_SUPPORT_CLASS_2                 (0x00000002)
1842 #define MPI_FCPORTPAGE0_SUPPORT_CLASS_3                 (0x00000004)
1843
1844 #define MPI_FCPORTPAGE0_SUPPORT_SPEED_UKNOWN            (0x00000000) /* (SNIA)HBA_PORTSPEED_UNKNOWN 0   Unknown - transceiver incapable of reporting */
1845 #define MPI_FCPORTPAGE0_SUPPORT_1GBIT_SPEED             (0x00000001) /* (SNIA)HBA_PORTSPEED_1GBIT   1   1 GBit/sec */
1846 #define MPI_FCPORTPAGE0_SUPPORT_2GBIT_SPEED             (0x00000002) /* (SNIA)HBA_PORTSPEED_2GBIT   2   2 GBit/sec */
1847 #define MPI_FCPORTPAGE0_SUPPORT_10GBIT_SPEED            (0x00000004) /* (SNIA)HBA_PORTSPEED_10GBIT  4  10 GBit/sec */
1848 #define MPI_FCPORTPAGE0_SUPPORT_4GBIT_SPEED             (0x00000008) /* (SNIA)HBA_PORTSPEED_4GBIT   8   4 GBit/sec */
1849
1850 #define MPI_FCPORTPAGE0_CURRENT_SPEED_UKNOWN            MPI_FCPORTPAGE0_SUPPORT_SPEED_UKNOWN
1851 #define MPI_FCPORTPAGE0_CURRENT_SPEED_1GBIT             MPI_FCPORTPAGE0_SUPPORT_1GBIT_SPEED
1852 #define MPI_FCPORTPAGE0_CURRENT_SPEED_2GBIT             MPI_FCPORTPAGE0_SUPPORT_2GBIT_SPEED
1853 #define MPI_FCPORTPAGE0_CURRENT_SPEED_10GBIT            MPI_FCPORTPAGE0_SUPPORT_10GBIT_SPEED
1854 #define MPI_FCPORTPAGE0_CURRENT_SPEED_4GBIT             MPI_FCPORTPAGE0_SUPPORT_4GBIT_SPEED
1855 #define MPI_FCPORTPAGE0_CURRENT_SPEED_NOT_NEGOTIATED    (0x00008000)        /* (SNIA)HBA_PORTSPEED_NOT_NEGOTIATED (1<<15) Speed not established */
1856
1857
1858 typedef struct _CONFIG_PAGE_FC_PORT_1
1859 {
1860     CONFIG_PAGE_HEADER      Header;                     /* 00h */
1861     U32                     Flags;                      /* 04h */
1862     U64                     NoSEEPROMWWNN;              /* 08h */
1863     U64                     NoSEEPROMWWPN;              /* 10h */
1864     U8                      HardALPA;                   /* 18h */
1865     U8                      LinkConfig;                 /* 19h */
1866     U8                      TopologyConfig;             /* 1Ah */
1867     U8                      AltConnector;               /* 1Bh */
1868     U8                      NumRequestedAliases;        /* 1Ch */
1869     U8                      RR_TOV;                     /* 1Dh */
1870     U8                      InitiatorDeviceTimeout;     /* 1Eh */
1871     U8                      InitiatorIoPendTimeout;     /* 1Fh */
1872 } CONFIG_PAGE_FC_PORT_1, MPI_POINTER PTR_CONFIG_PAGE_FC_PORT_1,
1873   FCPortPage1_t, MPI_POINTER pFCPortPage1_t;
1874
1875 #define MPI_FCPORTPAGE1_PAGEVERSION                     (0x06)
1876
1877 #define MPI_FCPORTPAGE1_FLAGS_EXT_FCP_STATUS_EN         (0x08000000)
1878 #define MPI_FCPORTPAGE1_FLAGS_IMMEDIATE_ERROR_REPLY     (0x04000000)
1879 #define MPI_FCPORTPAGE1_FLAGS_FORCE_USE_NOSEEPROM_WWNS  (0x02000000)
1880 #define MPI_FCPORTPAGE1_FLAGS_VERBOSE_RESCAN_EVENTS     (0x01000000)
1881 #define MPI_FCPORTPAGE1_FLAGS_TARGET_MODE_OXID          (0x00800000)
1882 #define MPI_FCPORTPAGE1_FLAGS_PORT_OFFLINE              (0x00400000)
1883 #define MPI_FCPORTPAGE1_FLAGS_SOFT_ALPA_FALLBACK        (0x00200000)
1884 #define MPI_FCPORTPAGE1_FLAGS_TARGET_LARGE_CDB_ENABLE   (0x00000080)
1885 #define MPI_FCPORTPAGE1_FLAGS_MASK_RR_TOV_UNITS         (0x00000070)
1886 #define MPI_FCPORTPAGE1_FLAGS_SUPPRESS_PROT_REG         (0x00000008)
1887 #define MPI_FCPORTPAGE1_FLAGS_PLOGI_ON_LOGO             (0x00000004)
1888 #define MPI_FCPORTPAGE1_FLAGS_MAINTAIN_LOGINS           (0x00000002)
1889 #define MPI_FCPORTPAGE1_FLAGS_SORT_BY_DID               (0x00000001)
1890 #define MPI_FCPORTPAGE1_FLAGS_SORT_BY_WWN               (0x00000000)
1891
1892 #define MPI_FCPORTPAGE1_FLAGS_PROT_MASK                 (0xF0000000)
1893 #define MPI_FCPORTPAGE1_FLAGS_PROT_SHIFT                (28)
1894 #define MPI_FCPORTPAGE1_FLAGS_PROT_FCP_INIT             ((U32)MPI_PORTFACTS_PROTOCOL_INITIATOR << MPI_FCPORTPAGE1_FLAGS_PROT_SHIFT)
1895 #define MPI_FCPORTPAGE1_FLAGS_PROT_FCP_TARG             ((U32)MPI_PORTFACTS_PROTOCOL_TARGET << MPI_FCPORTPAGE1_FLAGS_PROT_SHIFT)
1896 #define MPI_FCPORTPAGE1_FLAGS_PROT_LAN                  ((U32)MPI_PORTFACTS_PROTOCOL_LAN << MPI_FCPORTPAGE1_FLAGS_PROT_SHIFT)
1897 #define MPI_FCPORTPAGE1_FLAGS_PROT_LOGBUSADDR           ((U32)MPI_PORTFACTS_PROTOCOL_LOGBUSADDR << MPI_FCPORTPAGE1_FLAGS_PROT_SHIFT)
1898
1899 #define MPI_FCPORTPAGE1_FLAGS_NONE_RR_TOV_UNITS         (0x00000000)
1900 #define MPI_FCPORTPAGE1_FLAGS_THOUSANDTH_RR_TOV_UNITS   (0x00000010)
1901 #define MPI_FCPORTPAGE1_FLAGS_TENTH_RR_TOV_UNITS        (0x00000030)
1902 #define MPI_FCPORTPAGE1_FLAGS_TEN_RR_TOV_UNITS          (0x00000050)
1903
1904 #define MPI_FCPORTPAGE1_HARD_ALPA_NOT_USED              (0xFF)
1905
1906 #define MPI_FCPORTPAGE1_LCONFIG_SPEED_MASK              (0x0F)
1907 #define MPI_FCPORTPAGE1_LCONFIG_SPEED_1GIG              (0x00)
1908 #define MPI_FCPORTPAGE1_LCONFIG_SPEED_2GIG              (0x01)
1909 #define MPI_FCPORTPAGE1_LCONFIG_SPEED_4GIG              (0x02)
1910 #define MPI_FCPORTPAGE1_LCONFIG_SPEED_10GIG             (0x03)
1911 #define MPI_FCPORTPAGE1_LCONFIG_SPEED_AUTO              (0x0F)
1912
1913 #define MPI_FCPORTPAGE1_TOPOLOGY_MASK                   (0x0F)
1914 #define MPI_FCPORTPAGE1_TOPOLOGY_NLPORT                 (0x01)
1915 #define MPI_FCPORTPAGE1_TOPOLOGY_NPORT                  (0x02)
1916 #define MPI_FCPORTPAGE1_TOPOLOGY_AUTO                   (0x0F)
1917
1918 #define MPI_FCPORTPAGE1_ALT_CONN_UNKNOWN                (0x00)
1919
1920 #define MPI_FCPORTPAGE1_INITIATOR_DEV_TIMEOUT_MASK      (0x7F)
1921 #define MPI_FCPORTPAGE1_INITIATOR_DEV_UNIT_16           (0x80)
1922
1923
1924 typedef struct _CONFIG_PAGE_FC_PORT_2
1925 {
1926     CONFIG_PAGE_HEADER      Header;                     /* 00h */
1927     U8                      NumberActive;               /* 04h */
1928     U8                      ALPA[127];                  /* 05h */
1929 } CONFIG_PAGE_FC_PORT_2, MPI_POINTER PTR_CONFIG_PAGE_FC_PORT_2,
1930   FCPortPage2_t, MPI_POINTER pFCPortPage2_t;
1931
1932 #define MPI_FCPORTPAGE2_PAGEVERSION                     (0x01)
1933
1934
1935 typedef struct _WWN_FORMAT
1936 {
1937     U64                     WWNN;                       /* 00h */
1938     U64                     WWPN;                       /* 08h */
1939 } WWN_FORMAT, MPI_POINTER PTR_WWN_FORMAT,
1940   WWNFormat, MPI_POINTER pWWNFormat;
1941
1942 typedef union _FC_PORT_PERSISTENT_PHYSICAL_ID
1943 {
1944     WWN_FORMAT              WWN;
1945     U32                     Did;
1946 } FC_PORT_PERSISTENT_PHYSICAL_ID, MPI_POINTER PTR_FC_PORT_PERSISTENT_PHYSICAL_ID,
1947   PersistentPhysicalId_t, MPI_POINTER pPersistentPhysicalId_t;
1948
1949 typedef struct _FC_PORT_PERSISTENT
1950 {
1951     FC_PORT_PERSISTENT_PHYSICAL_ID  PhysicalIdentifier; /* 00h */
1952     U8                              TargetID;           /* 10h */
1953     U8                              Bus;                /* 11h */
1954     U16                             Flags;              /* 12h */
1955 } FC_PORT_PERSISTENT, MPI_POINTER PTR_FC_PORT_PERSISTENT,
1956   PersistentData_t, MPI_POINTER pPersistentData_t;
1957
1958 #define MPI_PERSISTENT_FLAGS_SHIFT                      (16)
1959 #define MPI_PERSISTENT_FLAGS_ENTRY_VALID                (0x0001)
1960 #define MPI_PERSISTENT_FLAGS_SCAN_ID                    (0x0002)
1961 #define MPI_PERSISTENT_FLAGS_SCAN_LUNS                  (0x0004)
1962 #define MPI_PERSISTENT_FLAGS_BOOT_DEVICE                (0x0008)
1963 #define MPI_PERSISTENT_FLAGS_BY_DID                     (0x0080)
1964
1965 /*
1966  * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
1967  * one and check Header.PageLength at runtime.
1968  */
1969 #ifndef MPI_FC_PORT_PAGE_3_ENTRY_MAX
1970 #define MPI_FC_PORT_PAGE_3_ENTRY_MAX        (1)
1971 #endif
1972
1973 typedef struct _CONFIG_PAGE_FC_PORT_3
1974 {
1975     CONFIG_PAGE_HEADER      Header;                                 /* 00h */
1976     FC_PORT_PERSISTENT      Entry[MPI_FC_PORT_PAGE_3_ENTRY_MAX];    /* 04h */
1977 } CONFIG_PAGE_FC_PORT_3, MPI_POINTER PTR_CONFIG_PAGE_FC_PORT_3,
1978   FCPortPage3_t, MPI_POINTER pFCPortPage3_t;
1979
1980 #define MPI_FCPORTPAGE3_PAGEVERSION                     (0x01)
1981
1982
1983 typedef struct _CONFIG_PAGE_FC_PORT_4
1984 {
1985     CONFIG_PAGE_HEADER      Header;                     /* 00h */
1986     U32                     PortFlags;                  /* 04h */
1987     U32                     PortSettings;               /* 08h */
1988 } CONFIG_PAGE_FC_PORT_4, MPI_POINTER PTR_CONFIG_PAGE_FC_PORT_4,
1989   FCPortPage4_t, MPI_POINTER pFCPortPage4_t;
1990
1991 #define MPI_FCPORTPAGE4_PAGEVERSION                     (0x00)
1992
1993 #define MPI_FCPORTPAGE4_PORT_FLAGS_ALTERNATE_CHS        (0x00000008)
1994
1995 #define MPI_FCPORTPAGE4_PORT_MASK_INIT_HBA              (0x00000030)
1996 #define MPI_FCPORTPAGE4_PORT_DISABLE_INIT_HBA           (0x00000000)
1997 #define MPI_FCPORTPAGE4_PORT_BIOS_INIT_HBA              (0x00000010)
1998 #define MPI_FCPORTPAGE4_PORT_OS_INIT_HBA                (0x00000020)
1999 #define MPI_FCPORTPAGE4_PORT_BIOS_OS_INIT_HBA           (0x00000030)
2000 #define MPI_FCPORTPAGE4_PORT_REMOVABLE_MEDIA            (0x000000C0)
2001 #define MPI_FCPORTPAGE4_PORT_SPINUP_DELAY_MASK          (0x00000F00)
2002
2003
2004 typedef struct _CONFIG_PAGE_FC_PORT_5_ALIAS_INFO
2005 {
2006     U8      Flags;                                      /* 00h */
2007     U8      AliasAlpa;                                  /* 01h */
2008     U16     Reserved;                                   /* 02h */
2009     U64     AliasWWNN;                                  /* 04h */
2010     U64     AliasWWPN;                                  /* 0Ch */
2011 } CONFIG_PAGE_FC_PORT_5_ALIAS_INFO,
2012   MPI_POINTER PTR_CONFIG_PAGE_FC_PORT_5_ALIAS_INFO,
2013   FcPortPage5AliasInfo_t, MPI_POINTER pFcPortPage5AliasInfo_t;
2014
2015 typedef struct _CONFIG_PAGE_FC_PORT_5
2016 {
2017     CONFIG_PAGE_HEADER                  Header;         /* 00h */
2018     CONFIG_PAGE_FC_PORT_5_ALIAS_INFO    AliasInfo;      /* 04h */
2019 } CONFIG_PAGE_FC_PORT_5, MPI_POINTER PTR_CONFIG_PAGE_FC_PORT_5,
2020   FCPortPage5_t, MPI_POINTER pFCPortPage5_t;
2021
2022 #define MPI_FCPORTPAGE5_PAGEVERSION                     (0x02)
2023
2024 #define MPI_FCPORTPAGE5_FLAGS_ALPA_ACQUIRED             (0x01)
2025 #define MPI_FCPORTPAGE5_FLAGS_HARD_ALPA                 (0x02)
2026 #define MPI_FCPORTPAGE5_FLAGS_HARD_WWNN                 (0x04)
2027 #define MPI_FCPORTPAGE5_FLAGS_HARD_WWPN                 (0x08)
2028 #define MPI_FCPORTPAGE5_FLAGS_DISABLE                   (0x10)
2029
2030 typedef struct _CONFIG_PAGE_FC_PORT_6
2031 {
2032     CONFIG_PAGE_HEADER      Header;                     /* 00h */
2033     U32                     Reserved;                   /* 04h */
2034     U64                     TimeSinceReset;             /* 08h */
2035     U64                     TxFrames;                   /* 10h */
2036     U64                     RxFrames;                   /* 18h */
2037     U64                     TxWords;                    /* 20h */
2038     U64                     RxWords;                    /* 28h */
2039     U64                     LipCount;                   /* 30h */
2040     U64                     NosCount;                   /* 38h */
2041     U64                     ErrorFrames;                /* 40h */
2042     U64                     DumpedFrames;               /* 48h */
2043     U64                     LinkFailureCount;           /* 50h */
2044     U64                     LossOfSyncCount;            /* 58h */
2045     U64                     LossOfSignalCount;          /* 60h */
2046     U64                     PrimativeSeqErrCount;       /* 68h */
2047     U64                     InvalidTxWordCount;         /* 70h */
2048     U64                     InvalidCrcCount;            /* 78h */
2049     U64                     FcpInitiatorIoCount;        /* 80h */
2050 } CONFIG_PAGE_FC_PORT_6, MPI_POINTER PTR_CONFIG_PAGE_FC_PORT_6,
2051   FCPortPage6_t, MPI_POINTER pFCPortPage6_t;
2052
2053 #define MPI_FCPORTPAGE6_PAGEVERSION                     (0x00)
2054
2055
2056 typedef struct _CONFIG_PAGE_FC_PORT_7
2057 {
2058     CONFIG_PAGE_HEADER      Header;                     /* 00h */
2059     U32                     Reserved;                   /* 04h */
2060     U8                      PortSymbolicName[256];      /* 08h */
2061 } CONFIG_PAGE_FC_PORT_7, MPI_POINTER PTR_CONFIG_PAGE_FC_PORT_7,
2062   FCPortPage7_t, MPI_POINTER pFCPortPage7_t;
2063
2064 #define MPI_FCPORTPAGE7_PAGEVERSION                     (0x00)
2065
2066
2067 typedef struct _CONFIG_PAGE_FC_PORT_8
2068 {
2069     CONFIG_PAGE_HEADER      Header;                     /* 00h */
2070     U32                     BitVector[8];               /* 04h */
2071 } CONFIG_PAGE_FC_PORT_8, MPI_POINTER PTR_CONFIG_PAGE_FC_PORT_8,
2072   FCPortPage8_t, MPI_POINTER pFCPortPage8_t;
2073
2074 #define MPI_FCPORTPAGE8_PAGEVERSION                     (0x00)
2075
2076
2077 typedef struct _CONFIG_PAGE_FC_PORT_9
2078 {
2079     CONFIG_PAGE_HEADER      Header;                     /* 00h */
2080     U32                     Reserved;                   /* 04h */
2081     U64                     GlobalWWPN;                 /* 08h */
2082     U64                     GlobalWWNN;                 /* 10h */
2083     U32                     UnitType;                   /* 18h */
2084     U32                     PhysicalPortNumber;         /* 1Ch */
2085     U32                     NumAttachedNodes;           /* 20h */
2086     U16                     IPVersion;                  /* 24h */
2087     U16                     UDPPortNumber;              /* 26h */
2088     U8                      IPAddress[16];              /* 28h */
2089     U16                     Reserved1;                  /* 38h */
2090     U16                     TopologyDiscoveryFlags;     /* 3Ah */
2091 } CONFIG_PAGE_FC_PORT_9, MPI_POINTER PTR_CONFIG_PAGE_FC_PORT_9,
2092   FCPortPage9_t, MPI_POINTER pFCPortPage9_t;
2093
2094 #define MPI_FCPORTPAGE9_PAGEVERSION                     (0x00)
2095
2096
2097 typedef struct _CONFIG_PAGE_FC_PORT_10_BASE_SFP_DATA
2098 {
2099     U8                      Id;                         /* 10h */
2100     U8                      ExtId;                      /* 11h */
2101     U8                      Connector;                  /* 12h */
2102     U8                      Transceiver[8];             /* 13h */
2103     U8                      Encoding;                   /* 1Bh */
2104     U8                      BitRate_100mbs;             /* 1Ch */
2105     U8                      Reserved1;                  /* 1Dh */
2106     U8                      Length9u_km;                /* 1Eh */
2107     U8                      Length9u_100m;              /* 1Fh */
2108     U8                      Length50u_10m;              /* 20h */
2109     U8                      Length62p5u_10m;            /* 21h */
2110     U8                      LengthCopper_m;             /* 22h */
2111     U8                      Reseverved2;                /* 22h */
2112     U8                      VendorName[16];             /* 24h */
2113     U8                      Reserved3;                  /* 34h */
2114     U8                      VendorOUI[3];               /* 35h */
2115     U8                      VendorPN[16];               /* 38h */
2116     U8                      VendorRev[4];               /* 48h */
2117     U16                     Wavelength;                 /* 4Ch */
2118     U8                      Reserved4;                  /* 4Eh */
2119     U8                      CC_BASE;                    /* 4Fh */
2120 } CONFIG_PAGE_FC_PORT_10_BASE_SFP_DATA,
2121   MPI_POINTER PTR_CONFIG_PAGE_FC_PORT_10_BASE_SFP_DATA,
2122   FCPortPage10BaseSfpData_t, MPI_POINTER pFCPortPage10BaseSfpData_t;
2123
2124 #define MPI_FCPORT10_BASE_ID_UNKNOWN        (0x00)
2125 #define MPI_FCPORT10_BASE_ID_GBIC           (0x01)
2126 #define MPI_FCPORT10_BASE_ID_FIXED          (0x02)
2127 #define MPI_FCPORT10_BASE_ID_SFP            (0x03)
2128 #define MPI_FCPORT10_BASE_ID_SFP_MIN        (0x04)
2129 #define MPI_FCPORT10_BASE_ID_SFP_MAX        (0x7F)
2130 #define MPI_FCPORT10_BASE_ID_VEND_SPEC_MASK (0x80)
2131
2132 #define MPI_FCPORT10_BASE_EXTID_UNKNOWN     (0x00)
2133 #define MPI_FCPORT10_BASE_EXTID_MODDEF1     (0x01)
2134 #define MPI_FCPORT10_BASE_EXTID_MODDEF2     (0x02)
2135 #define MPI_FCPORT10_BASE_EXTID_MODDEF3     (0x03)
2136 #define MPI_FCPORT10_BASE_EXTID_SEEPROM     (0x04)
2137 #define MPI_FCPORT10_BASE_EXTID_MODDEF5     (0x05)
2138 #define MPI_FCPORT10_BASE_EXTID_MODDEF6     (0x06)
2139 #define MPI_FCPORT10_BASE_EXTID_MODDEF7     (0x07)
2140 #define MPI_FCPORT10_BASE_EXTID_VNDSPC_MASK (0x80)
2141
2142 #define MPI_FCPORT10_BASE_CONN_UNKNOWN      (0x00)
2143 #define MPI_FCPORT10_BASE_CONN_SC           (0x01)
2144 #define MPI_FCPORT10_BASE_CONN_COPPER1      (0x02)
2145 #define MPI_FCPORT10_BASE_CONN_COPPER2      (0x03)
2146 #define MPI_FCPORT10_BASE_CONN_BNC_TNC      (0x04)
2147 #define MPI_FCPORT10_BASE_CONN_COAXIAL      (0x05)
2148 #define MPI_FCPORT10_BASE_CONN_FIBERJACK    (0x06)
2149 #define MPI_FCPORT10_BASE_CONN_LC           (0x07)
2150 #define MPI_FCPORT10_BASE_CONN_MT_RJ        (0x08)
2151 #define MPI_FCPORT10_BASE_CONN_MU           (0x09)
2152 #define MPI_FCPORT10_BASE_CONN_SG           (0x0A)
2153 #define MPI_FCPORT10_BASE_CONN_OPT_PIGT     (0x0B)
2154 #define MPI_FCPORT10_BASE_CONN_RSV1_MIN     (0x0C)
2155 #define MPI_FCPORT10_BASE_CONN_RSV1_MAX     (0x1F)
2156 #define MPI_FCPORT10_BASE_CONN_HSSDC_II     (0x20)
2157 #define MPI_FCPORT10_BASE_CONN_CPR_PIGT     (0x21)
2158 #define MPI_FCPORT10_BASE_CONN_RSV2_MIN     (0x22)
2159 #define MPI_FCPORT10_BASE_CONN_RSV2_MAX     (0x7F)
2160 #define MPI_FCPORT10_BASE_CONN_VNDSPC_MASK  (0x80)
2161
2162 #define MPI_FCPORT10_BASE_ENCODE_UNSPEC     (0x00)
2163 #define MPI_FCPORT10_BASE_ENCODE_8B10B      (0x01)
2164 #define MPI_FCPORT10_BASE_ENCODE_4B5B       (0x02)
2165 #define MPI_FCPORT10_BASE_ENCODE_NRZ        (0x03)
2166 #define MPI_FCPORT10_BASE_ENCODE_MANCHESTER (0x04)
2167
2168
2169 typedef struct _CONFIG_PAGE_FC_PORT_10_EXTENDED_SFP_DATA
2170 {
2171     U8                      Options[2];                 /* 50h */
2172     U8                      BitRateMax;                 /* 52h */
2173     U8                      BitRateMin;                 /* 53h */
2174     U8                      VendorSN[16];               /* 54h */
2175     U8                      DateCode[8];                /* 64h */
2176     U8                      DiagMonitoringType;         /* 6Ch */
2177     U8                      EnhancedOptions;            /* 6Dh */
2178     U8                      SFF8472Compliance;          /* 6Eh */
2179     U8                      CC_EXT;                     /* 6Fh */
2180 } CONFIG_PAGE_FC_PORT_10_EXTENDED_SFP_DATA,
2181   MPI_POINTER PTR_CONFIG_PAGE_FC_PORT_10_EXTENDED_SFP_DATA,
2182   FCPortPage10ExtendedSfpData_t, MPI_POINTER pFCPortPage10ExtendedSfpData_t;
2183
2184 #define MPI_FCPORT10_EXT_OPTION1_RATESEL    (0x20)
2185 #define MPI_FCPORT10_EXT_OPTION1_TX_DISABLE (0x10)
2186 #define MPI_FCPORT10_EXT_OPTION1_TX_FAULT   (0x08)
2187 #define MPI_FCPORT10_EXT_OPTION1_LOS_INVERT (0x04)
2188 #define MPI_FCPORT10_EXT_OPTION1_LOS        (0x02)
2189
2190
2191 typedef struct _CONFIG_PAGE_FC_PORT_10
2192 {
2193     CONFIG_PAGE_HEADER                          Header;             /* 00h */
2194     U8                                          Flags;              /* 04h */
2195     U8                                          Reserved1;          /* 05h */
2196     U16                                         Reserved2;          /* 06h */
2197     U32                                         HwConfig1;          /* 08h */
2198     U32                                         HwConfig2;          /* 0Ch */
2199     CONFIG_PAGE_FC_PORT_10_BASE_SFP_DATA        Base;               /* 10h */
2200     CONFIG_PAGE_FC_PORT_10_EXTENDED_SFP_DATA    Extended;           /* 50h */
2201     U8                                          VendorSpecific[32]; /* 70h */
2202 } CONFIG_PAGE_FC_PORT_10, MPI_POINTER PTR_CONFIG_PAGE_FC_PORT_10,
2203   FCPortPage10_t, MPI_POINTER pFCPortPage10_t;
2204
2205 #define MPI_FCPORTPAGE10_PAGEVERSION                    (0x01)
2206
2207 /* standard MODDEF pin definitions (from GBIC spec.) */
2208 #define MPI_FCPORTPAGE10_FLAGS_MODDEF_MASK              (0x00000007)
2209 #define MPI_FCPORTPAGE10_FLAGS_MODDEF2                  (0x00000001)
2210 #define MPI_FCPORTPAGE10_FLAGS_MODDEF1                  (0x00000002)
2211 #define MPI_FCPORTPAGE10_FLAGS_MODDEF0                  (0x00000004)
2212 #define MPI_FCPORTPAGE10_FLAGS_MODDEF_NOGBIC            (0x00000007)
2213 #define MPI_FCPORTPAGE10_FLAGS_MODDEF_CPR_IEEE_CX       (0x00000006)
2214 #define MPI_FCPORTPAGE10_FLAGS_MODDEF_COPPER            (0x00000005)
2215 #define MPI_FCPORTPAGE10_FLAGS_MODDEF_OPTICAL_LW        (0x00000004)
2216 #define MPI_FCPORTPAGE10_FLAGS_MODDEF_SEEPROM           (0x00000003)
2217 #define MPI_FCPORTPAGE10_FLAGS_MODDEF_SW_OPTICAL        (0x00000002)
2218 #define MPI_FCPORTPAGE10_FLAGS_MODDEF_LX_IEEE_OPT_LW    (0x00000001)
2219 #define MPI_FCPORTPAGE10_FLAGS_MODDEF_SX_IEEE_OPT_SW    (0x00000000)
2220
2221 #define MPI_FCPORTPAGE10_FLAGS_CC_BASE_OK               (0x00000010)
2222 #define MPI_FCPORTPAGE10_FLAGS_CC_EXT_OK                (0x00000020)
2223
2224
2225 /****************************************************************************
2226 *   FC Device Config Pages
2227 ****************************************************************************/
2228
2229 typedef struct _CONFIG_PAGE_FC_DEVICE_0
2230 {
2231     CONFIG_PAGE_HEADER      Header;                     /* 00h */
2232     U64                     WWNN;                       /* 04h */
2233     U64                     WWPN;                       /* 0Ch */
2234     U32                     PortIdentifier;             /* 14h */
2235     U8                      Protocol;                   /* 18h */
2236     U8                      Flags;                      /* 19h */
2237     U16                     BBCredit;                   /* 1Ah */
2238     U16                     MaxRxFrameSize;             /* 1Ch */
2239     U8                      ADISCHardALPA;              /* 1Eh */
2240     U8                      PortNumber;                 /* 1Fh */
2241     U8                      FcPhLowestVersion;          /* 20h */
2242     U8                      FcPhHighestVersion;         /* 21h */
2243     U8                      CurrentTargetID;            /* 22h */
2244     U8                      CurrentBus;                 /* 23h */
2245 } CONFIG_PAGE_FC_DEVICE_0, MPI_POINTER PTR_CONFIG_PAGE_FC_DEVICE_0,
2246   FCDevicePage0_t, MPI_POINTER pFCDevicePage0_t;
2247
2248 #define MPI_FC_DEVICE_PAGE0_PAGEVERSION                 (0x03)
2249
2250 #define MPI_FC_DEVICE_PAGE0_FLAGS_TARGETID_BUS_VALID    (0x01)
2251 #define MPI_FC_DEVICE_PAGE0_FLAGS_PLOGI_INVALID         (0x02)
2252 #define MPI_FC_DEVICE_PAGE0_FLAGS_PRLI_INVALID          (0x04)
2253
2254 #define MPI_FC_DEVICE_PAGE0_PROT_IP                     (0x01)
2255 #define MPI_FC_DEVICE_PAGE0_PROT_FCP_TARGET             (0x02)
2256 #define MPI_FC_DEVICE_PAGE0_PROT_FCP_INITIATOR          (0x04)
2257 #define MPI_FC_DEVICE_PAGE0_PROT_FCP_RETRY              (0x08)
2258
2259 #define MPI_FC_DEVICE_PAGE0_PGAD_PORT_MASK      (MPI_FC_DEVICE_PGAD_PORT_MASK)
2260 #define MPI_FC_DEVICE_PAGE0_PGAD_FORM_MASK      (MPI_FC_DEVICE_PGAD_FORM_MASK)
2261 #define MPI_FC_DEVICE_PAGE0_PGAD_FORM_NEXT_DID  (MPI_FC_DEVICE_PGAD_FORM_NEXT_DID)
2262 #define MPI_FC_DEVICE_PAGE0_PGAD_FORM_BUS_TID   (MPI_FC_DEVICE_PGAD_FORM_BUS_TID)
2263 #define MPI_FC_DEVICE_PAGE0_PGAD_DID_MASK       (MPI_FC_DEVICE_PGAD_ND_DID_MASK)
2264 #define MPI_FC_DEVICE_PAGE0_PGAD_BUS_MASK       (MPI_FC_DEVICE_PGAD_BT_BUS_MASK)
2265 #define MPI_FC_DEVICE_PAGE0_PGAD_BUS_SHIFT      (MPI_FC_DEVICE_PGAD_BT_BUS_SHIFT)
2266 #define MPI_FC_DEVICE_PAGE0_PGAD_TID_MASK       (MPI_FC_DEVICE_PGAD_BT_TID_MASK)
2267
2268 #define MPI_FC_DEVICE_PAGE0_HARD_ALPA_UNKNOWN   (0xFF)
2269
2270 /****************************************************************************
2271 *   RAID Volume Config Pages
2272 ****************************************************************************/
2273
2274 typedef struct _RAID_VOL0_PHYS_DISK
2275 {
2276     U16                         Reserved;               /* 00h */
2277     U8                          PhysDiskMap;            /* 02h */
2278     U8                          PhysDiskNum;            /* 03h */
2279 } RAID_VOL0_PHYS_DISK, MPI_POINTER PTR_RAID_VOL0_PHYS_DISK,
2280   RaidVol0PhysDisk_t, MPI_POINTER pRaidVol0PhysDisk_t;
2281
2282 #define MPI_RAIDVOL0_PHYSDISK_PRIMARY                   (0x01)
2283 #define MPI_RAIDVOL0_PHYSDISK_SECONDARY                 (0x02)
2284
2285 typedef struct _RAID_VOL0_STATUS
2286 {
2287     U8                          Flags;                  /* 00h */
2288     U8                          State;                  /* 01h */
2289     U16                         Reserved;               /* 02h */
2290 } RAID_VOL0_STATUS, MPI_POINTER PTR_RAID_VOL0_STATUS,
2291   RaidVol0Status_t, MPI_POINTER pRaidVol0Status_t;
2292
2293 /* RAID Volume Page 0 VolumeStatus defines */
2294 #define MPI_RAIDVOL0_STATUS_FLAG_ENABLED                (0x01)
2295 #define MPI_RAIDVOL0_STATUS_FLAG_QUIESCED               (0x02)
2296 #define MPI_RAIDVOL0_STATUS_FLAG_RESYNC_IN_PROGRESS     (0x04)
2297 #define MPI_RAIDVOL0_STATUS_FLAG_VOLUME_INACTIVE        (0x08)
2298 #define MPI_RAIDVOL0_STATUS_FLAG_BAD_BLOCK_TABLE_FULL   (0x10)
2299
2300 #define MPI_RAIDVOL0_STATUS_STATE_OPTIMAL               (0x00)
2301 #define MPI_RAIDVOL0_STATUS_STATE_DEGRADED              (0x01)
2302 #define MPI_RAIDVOL0_STATUS_STATE_FAILED                (0x02)
2303 #define MPI_RAIDVOL0_STATUS_STATE_MISSING               (0x03)
2304
2305 typedef struct _RAID_VOL0_SETTINGS
2306 {
2307     U16                         Settings;       /* 00h */
2308     U8                          HotSparePool;   /* 01h */ /* MPI_RAID_HOT_SPARE_POOL_ */
2309     U8                          Reserved;       /* 02h */
2310 } RAID_VOL0_SETTINGS, MPI_POINTER PTR_RAID_VOL0_SETTINGS,
2311   RaidVol0Settings, MPI_POINTER pRaidVol0Settings;
2312
2313 /* RAID Volume Page 0 VolumeSettings defines */
2314 #define MPI_RAIDVOL0_SETTING_WRITE_CACHING_ENABLE       (0x0001)
2315 #define MPI_RAIDVOL0_SETTING_OFFLINE_ON_SMART           (0x0002)
2316 #define MPI_RAIDVOL0_SETTING_AUTO_CONFIGURE             (0x0004)
2317 #define MPI_RAIDVOL0_SETTING_PRIORITY_RESYNC            (0x0008)
2318 #define MPI_RAIDVOL0_SETTING_FAST_DATA_SCRUBBING_0102   (0x0020) /* obsolete */
2319
2320 #define MPI_RAIDVOL0_SETTING_MASK_METADATA_SIZE         (0x00C0)
2321 #define MPI_RAIDVOL0_SETTING_64MB_METADATA_SIZE         (0x0000)
2322 #define MPI_RAIDVOL0_SETTING_512MB_METADATA_SIZE        (0x0040)
2323
2324 #define MPI_RAIDVOL0_SETTING_USE_PRODUCT_ID_SUFFIX      (0x0010)
2325 #define MPI_RAIDVOL0_SETTING_USE_DEFAULTS               (0x8000)
2326
2327 /* RAID Volume Page 0 HotSparePool defines, also used in RAID Physical Disk */
2328 #define MPI_RAID_HOT_SPARE_POOL_0                       (0x01)
2329 #define MPI_RAID_HOT_SPARE_POOL_1                       (0x02)
2330 #define MPI_RAID_HOT_SPARE_POOL_2                       (0x04)
2331 #define MPI_RAID_HOT_SPARE_POOL_3                       (0x08)
2332 #define MPI_RAID_HOT_SPARE_POOL_4                       (0x10)
2333 #define MPI_RAID_HOT_SPARE_POOL_5                       (0x20)
2334 #define MPI_RAID_HOT_SPARE_POOL_6                       (0x40)
2335 #define MPI_RAID_HOT_SPARE_POOL_7                       (0x80)
2336
2337 /*
2338  * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
2339  * one and check Header.PageLength at runtime.
2340  */
2341 #ifndef MPI_RAID_VOL_PAGE_0_PHYSDISK_MAX
2342 #define MPI_RAID_VOL_PAGE_0_PHYSDISK_MAX        (1)
2343 #endif
2344
2345 typedef struct _CONFIG_PAGE_RAID_VOL_0
2346 {
2347     CONFIG_PAGE_HEADER      Header;         /* 00h */
2348     U8                      VolumeID;       /* 04h */
2349     U8                      VolumeBus;      /* 05h */
2350     U8                      VolumeIOC;      /* 06h */
2351     U8                      VolumeType;     /* 07h */ /* MPI_RAID_VOL_TYPE_ */
2352     RAID_VOL0_STATUS        VolumeStatus;   /* 08h */
2353     RAID_VOL0_SETTINGS      VolumeSettings; /* 0Ch */
2354     U32                     MaxLBA;         /* 10h */
2355     U32                     MaxLBAHigh;     /* 14h */
2356     U32                     StripeSize;     /* 18h */
2357     U32                     Reserved2;      /* 1Ch */
2358     U32                     Reserved3;      /* 20h */
2359     U8                      NumPhysDisks;   /* 24h */
2360     U8                      DataScrubRate;  /* 25h */
2361     U8                      ResyncRate;     /* 26h */
2362     U8                      InactiveStatus; /* 27h */
2363     RAID_VOL0_PHYS_DISK     PhysDisk[MPI_RAID_VOL_PAGE_0_PHYSDISK_MAX];/* 28h */
2364 } CONFIG_PAGE_RAID_VOL_0, MPI_POINTER PTR_CONFIG_PAGE_RAID_VOL_0,
2365   RaidVolumePage0_t, MPI_POINTER pRaidVolumePage0_t;
2366
2367 #define MPI_RAIDVOLPAGE0_PAGEVERSION                    (0x07)
2368
2369 /* values for RAID Volume Page 0 InactiveStatus field */
2370 #define MPI_RAIDVOLPAGE0_UNKNOWN_INACTIVE               (0x00)
2371 #define MPI_RAIDVOLPAGE0_STALE_METADATA_INACTIVE        (0x01)
2372 #define MPI_RAIDVOLPAGE0_FOREIGN_VOLUME_INACTIVE        (0x02)
2373 #define MPI_RAIDVOLPAGE0_INSUFFICIENT_RESOURCE_INACTIVE (0x03)
2374 #define MPI_RAIDVOLPAGE0_CLONE_VOLUME_INACTIVE          (0x04)
2375 #define MPI_RAIDVOLPAGE0_INSUFFICIENT_METADATA_INACTIVE (0x05)
2376 #define MPI_RAIDVOLPAGE0_PREVIOUSLY_DELETED             (0x06)
2377
2378
2379 typedef struct _CONFIG_PAGE_RAID_VOL_1
2380 {
2381     CONFIG_PAGE_HEADER      Header;         /* 00h */
2382     U8                      VolumeID;       /* 04h */
2383     U8                      VolumeBus;      /* 05h */
2384     U8                      VolumeIOC;      /* 06h */
2385     U8                      Reserved0;      /* 07h */
2386     U8                      GUID[24];       /* 08h */
2387     U8                      Name[32];       /* 20h */
2388     U64                     WWID;           /* 40h */
2389     U32                     Reserved1;      /* 48h */
2390     U32                     Reserved2;      /* 4Ch */
2391 } CONFIG_PAGE_RAID_VOL_1, MPI_POINTER PTR_CONFIG_PAGE_RAID_VOL_1,
2392   RaidVolumePage1_t, MPI_POINTER pRaidVolumePage1_t;
2393
2394 #define MPI_RAIDVOLPAGE1_PAGEVERSION                    (0x01)
2395
2396
2397 /****************************************************************************
2398 *   RAID Physical Disk Config Pages
2399 ****************************************************************************/
2400
2401 typedef struct _RAID_PHYS_DISK0_ERROR_DATA
2402 {
2403     U8                      ErrorCdbByte;               /* 00h */
2404     U8                      ErrorSenseKey;              /* 01h */
2405     U16                     Reserved;                   /* 02h */
2406     U16                     ErrorCount;                 /* 04h */
2407     U8                      ErrorASC;                   /* 06h */
2408     U8                      ErrorASCQ;                  /* 07h */
2409     U16                     SmartCount;                 /* 08h */
2410     U8                      SmartASC;                   /* 0Ah */
2411     U8                      SmartASCQ;                  /* 0Bh */
2412 } RAID_PHYS_DISK0_ERROR_DATA, MPI_POINTER PTR_RAID_PHYS_DISK0_ERROR_DATA,
2413   RaidPhysDisk0ErrorData_t, MPI_POINTER pRaidPhysDisk0ErrorData_t;
2414
2415 typedef struct _RAID_PHYS_DISK_INQUIRY_DATA
2416 {
2417     U8                          VendorID[8];            /* 00h */
2418     U8                          ProductID[16];          /* 08h */
2419     U8                          ProductRevLevel[4];     /* 18h */
2420     U8                          Info[32];               /* 1Ch */
2421 } RAID_PHYS_DISK0_INQUIRY_DATA, MPI_POINTER PTR_RAID_PHYS_DISK0_INQUIRY_DATA,
2422   RaidPhysDisk0InquiryData, MPI_POINTER pRaidPhysDisk0InquiryData;
2423
2424 typedef struct _RAID_PHYS_DISK0_SETTINGS
2425 {
2426     U8              SepID;              /* 00h */
2427     U8              SepBus;             /* 01h */
2428     U8              HotSparePool;       /* 02h */ /* MPI_RAID_HOT_SPARE_POOL_ */
2429     U8              PhysDiskSettings;   /* 03h */
2430 } RAID_PHYS_DISK0_SETTINGS, MPI_POINTER PTR_RAID_PHYS_DISK0_SETTINGS,
2431   RaidPhysDiskSettings_t, MPI_POINTER pRaidPhysDiskSettings_t;
2432
2433 typedef struct _RAID_PHYS_DISK0_STATUS
2434 {
2435     U8                              Flags;              /* 00h */
2436     U8                              State;              /* 01h */
2437     U16                             Reserved;           /* 02h */
2438 } RAID_PHYS_DISK0_STATUS, MPI_POINTER PTR_RAID_PHYS_DISK0_STATUS,
2439   RaidPhysDiskStatus_t, MPI_POINTER pRaidPhysDiskStatus_t;
2440
2441 /* RAID Physical Disk PhysDiskStatus flags */
2442
2443 #define MPI_PHYSDISK0_STATUS_FLAG_OUT_OF_SYNC           (0x01)
2444 #define MPI_PHYSDISK0_STATUS_FLAG_QUIESCED              (0x02)
2445 #define MPI_PHYSDISK0_STATUS_FLAG_INACTIVE_VOLUME       (0x04)
2446 #define MPI_PHYSDISK0_STATUS_FLAG_OPTIMAL_PREVIOUS      (0x00)
2447 #define MPI_PHYSDISK0_STATUS_FLAG_NOT_OPTIMAL_PREVIOUS  (0x08)
2448
2449 #define MPI_PHYSDISK0_STATUS_ONLINE                     (0x00)
2450 #define MPI_PHYSDISK0_STATUS_MISSING                    (0x01)
2451 #define MPI_PHYSDISK0_STATUS_NOT_COMPATIBLE             (0x02)
2452 #define MPI_PHYSDISK0_STATUS_FAILED                     (0x03)
2453 #define MPI_PHYSDISK0_STATUS_INITIALIZING               (0x04)
2454 #define MPI_PHYSDISK0_STATUS_OFFLINE_REQUESTED          (0x05)
2455 #define MPI_PHYSDISK0_STATUS_FAILED_REQUESTED           (0x06)
2456 #define MPI_PHYSDISK0_STATUS_OTHER_OFFLINE              (0xFF)
2457
2458 typedef struct _CONFIG_PAGE_RAID_PHYS_DISK_0
2459 {
2460     CONFIG_PAGE_HEADER              Header;             /* 00h */
2461     U8                              PhysDiskID;         /* 04h */
2462     U8                              PhysDiskBus;        /* 05h */
2463     U8                              PhysDiskIOC;        /* 06h */
2464     U8                              PhysDiskNum;        /* 07h */
2465     RAID_PHYS_DISK0_SETTINGS        PhysDiskSettings;   /* 08h */
2466     U32                             Reserved1;          /* 0Ch */
2467     U8                              ExtDiskIdentifier[8]; /* 10h */
2468     U8                              DiskIdentifier[16]; /* 18h */
2469     RAID_PHYS_DISK0_INQUIRY_DATA    InquiryData;        /* 28h */
2470     RAID_PHYS_DISK0_STATUS          PhysDiskStatus;     /* 64h */
2471     U32                             MaxLBA;             /* 68h */
2472     RAID_PHYS_DISK0_ERROR_DATA      ErrorData;          /* 6Ch */
2473 } CONFIG_PAGE_RAID_PHYS_DISK_0, MPI_POINTER PTR_CONFIG_PAGE_RAID_PHYS_DISK_0,
2474   RaidPhysDiskPage0_t, MPI_POINTER pRaidPhysDiskPage0_t;
2475
2476 #define MPI_RAIDPHYSDISKPAGE0_PAGEVERSION           (0x02)
2477
2478
2479 typedef struct _RAID_PHYS_DISK1_PATH
2480 {
2481     U8                              PhysDiskID;         /* 00h */
2482     U8                              PhysDiskBus;        /* 01h */
2483     U16                             Reserved1;          /* 02h */
2484     U64                             WWID;               /* 04h */
2485     U64                             OwnerWWID;          /* 0Ch */
2486     U8                              OwnerIdentifier;    /* 14h */
2487     U8                              Reserved2;          /* 15h */
2488     U16                             Flags;              /* 16h */
2489 } RAID_PHYS_DISK1_PATH, MPI_POINTER PTR_RAID_PHYS_DISK1_PATH,
2490   RaidPhysDisk1Path_t, MPI_POINTER pRaidPhysDisk1Path_t;
2491
2492 /* RAID Physical Disk Page 1 Flags field defines */
2493 #define MPI_RAID_PHYSDISK1_FLAG_BROKEN          (0x0002)
2494 #define MPI_RAID_PHYSDISK1_FLAG_INVALID         (0x0001)
2495
2496
2497 /*
2498  * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
2499  * one and check Header.PageLength or NumPhysDiskPaths at runtime.
2500  */
2501 #ifndef MPI_RAID_PHYS_DISK1_PATH_MAX
2502 #define MPI_RAID_PHYS_DISK1_PATH_MAX    (1)
2503 #endif
2504
2505 typedef struct _CONFIG_PAGE_RAID_PHYS_DISK_1
2506 {
2507     CONFIG_PAGE_HEADER              Header;             /* 00h */
2508     U8                              NumPhysDiskPaths;   /* 04h */
2509     U8                              PhysDiskNum;        /* 05h */
2510     U16                             Reserved2;          /* 06h */
2511     U32                             Reserved1;          /* 08h */
2512     RAID_PHYS_DISK1_PATH            Path[MPI_RAID_PHYS_DISK1_PATH_MAX];/* 0Ch */
2513 } CONFIG_PAGE_RAID_PHYS_DISK_1, MPI_POINTER PTR_CONFIG_PAGE_RAID_PHYS_DISK_1,
2514   RaidPhysDiskPage1_t, MPI_POINTER pRaidPhysDiskPage1_t;
2515
2516 #define MPI_RAIDPHYSDISKPAGE1_PAGEVERSION       (0x00)
2517
2518
2519 /****************************************************************************
2520 *   LAN Config Pages
2521 ****************************************************************************/
2522
2523 typedef struct _CONFIG_PAGE_LAN_0
2524 {
2525     ConfigPageHeader_t      Header;                     /* 00h */
2526     U16                     TxRxModes;                  /* 04h */
2527     U16                     Reserved;                   /* 06h */
2528     U32                     PacketPrePad;               /* 08h */
2529 } CONFIG_PAGE_LAN_0, MPI_POINTER PTR_CONFIG_PAGE_LAN_0,
2530   LANPage0_t, MPI_POINTER pLANPage0_t;
2531
2532 #define MPI_LAN_PAGE0_PAGEVERSION                       (0x01)
2533
2534 #define MPI_LAN_PAGE0_RETURN_LOOPBACK                   (0x0000)
2535 #define MPI_LAN_PAGE0_SUPPRESS_LOOPBACK                 (0x0001)
2536 #define MPI_LAN_PAGE0_LOOPBACK_MASK                     (0x0001)
2537
2538 typedef struct _CONFIG_PAGE_LAN_1
2539 {
2540     ConfigPageHeader_t      Header;                     /* 00h */
2541     U16                     Reserved;                   /* 04h */
2542     U8                      CurrentDeviceState;         /* 06h */
2543     U8                      Reserved1;                  /* 07h */
2544     U32                     MinPacketSize;              /* 08h */
2545     U32                     MaxPacketSize;              /* 0Ch */
2546     U32                     HardwareAddressLow;         /* 10h */
2547     U32                     HardwareAddressHigh;        /* 14h */
2548     U32                     MaxWireSpeedLow;            /* 18h */
2549     U32                     MaxWireSpeedHigh;           /* 1Ch */
2550     U32                     BucketsRemaining;           /* 20h */
2551     U32                     MaxReplySize;               /* 24h */
2552     U32                     NegWireSpeedLow;            /* 28h */
2553     U32                     NegWireSpeedHigh;           /* 2Ch */
2554 } CONFIG_PAGE_LAN_1, MPI_POINTER PTR_CONFIG_PAGE_LAN_1,
2555   LANPage1_t, MPI_POINTER pLANPage1_t;
2556
2557 #define MPI_LAN_PAGE1_PAGEVERSION                       (0x03)
2558
2559 #define MPI_LAN_PAGE1_DEV_STATE_RESET                   (0x00)
2560 #define MPI_LAN_PAGE1_DEV_STATE_OPERATIONAL             (0x01)
2561
2562
2563 /****************************************************************************
2564 *   Inband Config Pages
2565 ****************************************************************************/
2566
2567 typedef struct _CONFIG_PAGE_INBAND_0
2568 {
2569     CONFIG_PAGE_HEADER      Header;                     /* 00h */
2570     MPI_VERSION_FORMAT      InbandVersion;              /* 04h */
2571     U16                     MaximumBuffers;             /* 08h */
2572     U16                     Reserved1;                  /* 0Ah */
2573 } CONFIG_PAGE_INBAND_0, MPI_POINTER PTR_CONFIG_PAGE_INBAND_0,
2574   InbandPage0_t, MPI_POINTER pInbandPage0_t;
2575
2576 #define MPI_INBAND_PAGEVERSION          (0x00)
2577
2578
2579
2580 /****************************************************************************
2581 *   SAS IO Unit Config Pages
2582 ****************************************************************************/
2583
2584 typedef struct _MPI_SAS_IO_UNIT0_PHY_DATA
2585 {
2586     U8          Port;                   /* 00h */
2587     U8          PortFlags;              /* 01h */
2588     U8          PhyFlags;               /* 02h */
2589     U8          NegotiatedLinkRate;     /* 03h */
2590     U32         ControllerPhyDeviceInfo;/* 04h */
2591     U16         AttachedDeviceHandle;   /* 08h */
2592     U16         ControllerDevHandle;    /* 0Ah */
2593     U32         DiscoveryStatus;        /* 0Ch */
2594 } MPI_SAS_IO_UNIT0_PHY_DATA, MPI_POINTER PTR_MPI_SAS_IO_UNIT0_PHY_DATA,
2595   SasIOUnit0PhyData, MPI_POINTER pSasIOUnit0PhyData;
2596
2597 /*
2598  * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
2599  * one and check Header.PageLength at runtime.
2600  */
2601 #ifndef MPI_SAS_IOUNIT0_PHY_MAX
2602 #define MPI_SAS_IOUNIT0_PHY_MAX         (1)
2603 #endif
2604
2605 typedef struct _CONFIG_PAGE_SAS_IO_UNIT_0
2606 {
2607     CONFIG_EXTENDED_PAGE_HEADER     Header;                             /* 00h */
2608     U16                             NvdataVersionDefault;               /* 08h */
2609     U16                             NvdataVersionPersistent;            /* 0Ah */
2610     U8                              NumPhys;                            /* 0Ch */
2611     U8                              Reserved2;                          /* 0Dh */
2612     U16                             Reserved3;                          /* 0Eh */
2613     MPI_SAS_IO_UNIT0_PHY_DATA       PhyData[MPI_SAS_IOUNIT0_PHY_MAX];   /* 10h */
2614 } CONFIG_PAGE_SAS_IO_UNIT_0, MPI_POINTER PTR_CONFIG_PAGE_SAS_IO_UNIT_0,
2615   SasIOUnitPage0_t, MPI_POINTER pSasIOUnitPage0_t;
2616
2617 #define MPI_SASIOUNITPAGE0_PAGEVERSION      (0x04)
2618
2619 /* values for SAS IO Unit Page 0 PortFlags */
2620 #define MPI_SAS_IOUNIT0_PORT_FLAGS_DISCOVERY_IN_PROGRESS    (0x08)
2621 #define MPI_SAS_IOUNIT0_PORT_FLAGS_0_TARGET_IOC_NUM         (0x00)
2622 #define MPI_SAS_IOUNIT0_PORT_FLAGS_1_TARGET_IOC_NUM         (0x04)
2623 #define MPI_SAS_IOUNIT0_PORT_FLAGS_AUTO_PORT_CONFIG         (0x01)
2624
2625 /* values for SAS IO Unit Page 0 PhyFlags */
2626 #define MPI_SAS_IOUNIT0_PHY_FLAGS_PHY_DISABLED              (0x04)
2627 #define MPI_SAS_IOUNIT0_PHY_FLAGS_TX_INVERT                 (0x02)
2628 #define MPI_SAS_IOUNIT0_PHY_FLAGS_RX_INVERT                 (0x01)
2629
2630 /* values for SAS IO Unit Page 0 NegotiatedLinkRate */
2631 #define MPI_SAS_IOUNIT0_RATE_UNKNOWN                        (0x00)
2632 #define MPI_SAS_IOUNIT0_RATE_PHY_DISABLED                   (0x01)
2633 #define MPI_SAS_IOUNIT0_RATE_FAILED_SPEED_NEGOTIATION       (0x02)
2634 #define MPI_SAS_IOUNIT0_RATE_SATA_OOB_COMPLETE              (0x03)
2635 #define MPI_SAS_IOUNIT0_RATE_1_5                            (0x08)
2636 #define MPI_SAS_IOUNIT0_RATE_3_0                            (0x09)
2637 #define MPI_SAS_IOUNIT0_RATE_6_0                            (0x0A)
2638
2639 /* see mpi_sas.h for values for SAS IO Unit Page 0 ControllerPhyDeviceInfo values */
2640
2641 /* values for SAS IO Unit Page 0 DiscoveryStatus */
2642 #define MPI_SAS_IOUNIT0_DS_LOOP_DETECTED                    (0x00000001)
2643 #define MPI_SAS_IOUNIT0_DS_UNADDRESSABLE_DEVICE             (0x00000002)
2644 #define MPI_SAS_IOUNIT0_DS_MULTIPLE_PORTS                   (0x00000004)
2645 #define MPI_SAS_IOUNIT0_DS_EXPANDER_ERR                     (0x00000008)
2646 #define MPI_SAS_IOUNIT0_DS_SMP_TIMEOUT                      (0x00000010)
2647 #define MPI_SAS_IOUNIT0_DS_OUT_ROUTE_ENTRIES                (0x00000020)
2648 #define MPI_SAS_IOUNIT0_DS_INDEX_NOT_EXIST                  (0x00000040)
2649 #define MPI_SAS_IOUNIT0_DS_SMP_FUNCTION_FAILED              (0x00000080)
2650 #define MPI_SAS_IOUNIT0_DS_SMP_CRC_ERROR                    (0x00000100)
2651 #define MPI_SAS_IOUNIT0_DS_SUBTRACTIVE_LINK                 (0x00000200)
2652 #define MPI_SAS_IOUNIT0_DS_TABLE_LINK                       (0x00000400)
2653 #define MPI_SAS_IOUNIT0_DS_UNSUPPORTED_DEVICE               (0x00000800)
2654 #define MPI_SAS_IOUNIT0_DS_MAX_SATA_TARGETS                 (0x00001000)
2655 #define MPI_SAS_IOUNIT0_DS_MULTI_PORT_DOMAIN                (0x00002000)
2656
2657
2658 typedef struct _MPI_SAS_IO_UNIT1_PHY_DATA
2659 {
2660     U8          Port;                       /* 00h */
2661     U8          PortFlags;                  /* 01h */
2662     U8          PhyFlags;                   /* 02h */
2663     U8          MaxMinLinkRate;             /* 03h */
2664     U32         ControllerPhyDeviceInfo;    /* 04h */
2665     U16         MaxTargetPortConnectTime;   /* 08h */
2666     U16         Reserved1;                  /* 0Ah */
2667 } MPI_SAS_IO_UNIT1_PHY_DATA, MPI_POINTER PTR_MPI_SAS_IO_UNIT1_PHY_DATA,
2668   SasIOUnit1PhyData, MPI_POINTER pSasIOUnit1PhyData;
2669
2670 /*
2671  * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
2672  * one and check Header.PageLength at runtime.
2673  */
2674 #ifndef MPI_SAS_IOUNIT1_PHY_MAX
2675 #define MPI_SAS_IOUNIT1_PHY_MAX         (1)
2676 #endif
2677
2678 typedef struct _CONFIG_PAGE_SAS_IO_UNIT_1
2679 {
2680     CONFIG_EXTENDED_PAGE_HEADER Header;                             /* 00h */
2681     U16                         ControlFlags;                       /* 08h */
2682     U16                         MaxNumSATATargets;                  /* 0Ah */
2683     U16                         AdditionalControlFlags;             /* 0Ch */
2684     U16                         Reserved1;                          /* 0Eh */
2685     U8                          NumPhys;                            /* 10h */
2686     U8                          SATAMaxQDepth;                      /* 11h */
2687     U8                          ReportDeviceMissingDelay;           /* 12h */
2688     U8                          IODeviceMissingDelay;               /* 13h */
2689     MPI_SAS_IO_UNIT1_PHY_DATA   PhyData[MPI_SAS_IOUNIT1_PHY_MAX];   /* 14h */
2690 } CONFIG_PAGE_SAS_IO_UNIT_1, MPI_POINTER PTR_CONFIG_PAGE_SAS_IO_UNIT_1,
2691   SasIOUnitPage1_t, MPI_POINTER pSasIOUnitPage1_t;
2692
2693 #define MPI_SASIOUNITPAGE1_PAGEVERSION      (0x07)
2694
2695 /* values for SAS IO Unit Page 1 ControlFlags */
2696 #define MPI_SAS_IOUNIT1_CONTROL_DEVICE_SELF_TEST            (0x8000)
2697 #define MPI_SAS_IOUNIT1_CONTROL_SATA_3_0_MAX                (0x4000)
2698 #define MPI_SAS_IOUNIT1_CONTROL_SATA_1_5_MAX                (0x2000)
2699 #define MPI_SAS_IOUNIT1_CONTROL_SATA_SW_PRESERVE            (0x1000)
2700 #define MPI_SAS_IOUNIT1_CONTROL_DISABLE_SAS_HASH            (0x0800)
2701
2702 #define MPI_SAS_IOUNIT1_CONTROL_MASK_DEV_SUPPORT            (0x0600)
2703 #define MPI_SAS_IOUNIT1_CONTROL_SHIFT_DEV_SUPPORT           (9)
2704 #define MPI_SAS_IOUNIT1_CONTROL_DEV_SUPPORT_BOTH            (0x00)
2705 #define MPI_SAS_IOUNIT1_CONTROL_DEV_SAS_SUPPORT             (0x01)
2706 #define MPI_SAS_IOUNIT1_CONTROL_DEV_SATA_SUPPORT            (0x02)
2707
2708 #define MPI_SAS_IOUNIT1_CONTROL_POSTPONE_SATA_INIT          (0x0100)
2709 #define MPI_SAS_IOUNIT1_CONTROL_SATA_48BIT_LBA_REQUIRED     (0x0080)
2710 #define MPI_SAS_IOUNIT1_CONTROL_SATA_SMART_REQUIRED         (0x0040)
2711 #define MPI_SAS_IOUNIT1_CONTROL_SATA_NCQ_REQUIRED           (0x0020)
2712 #define MPI_SAS_IOUNIT1_CONTROL_SATA_FUA_REQUIRED           (0x0010)
2713 #define MPI_SAS_IOUNIT1_CONTROL_PHY_ENABLE_ORDER_HIGH       (0x0008)
2714 #define MPI_SAS_IOUNIT1_CONTROL_SUBTRACTIVE_ILLEGAL         (0x0004)
2715 #define MPI_SAS_IOUNIT1_CONTROL_FIRST_LVL_DISC_ONLY         (0x0002)
2716 #define MPI_SAS_IOUNIT1_CONTROL_CLEAR_AFFILIATION           (0x0001)
2717
2718 /* values for SAS IO Unit Page 1 AdditionalControlFlags */
2719 #define MPI_SAS_IOUNIT1_ACONTROL_MULTI_PORT_DOMAIN_ILLEGAL          (0x0080)
2720 #define MPI_SAS_IOUNIT1_ACONTROL_SATA_ASYNCHROUNOUS_NOTIFICATION    (0x0040)
2721 #define MPI_SAS_IOUNIT1_ACONTROL_HIDE_NONZERO_ATTACHED_PHY_IDENT    (0x0020)
2722 #define MPI_SAS_IOUNIT1_ACONTROL_PORT_ENABLE_ONLY_SATA_LINK_RESET   (0x0010)
2723 #define MPI_SAS_IOUNIT1_ACONTROL_OTHER_AFFILIATION_SATA_LINK_RESET  (0x0008)
2724 #define MPI_SAS_IOUNIT1_ACONTROL_SELF_AFFILIATION_SATA_LINK_RESET   (0x0004)
2725 #define MPI_SAS_IOUNIT1_ACONTROL_NO_AFFILIATION_SATA_LINK_RESET     (0x0002)
2726 #define MPI_SAS_IOUNIT1_ACONTROL_ALLOW_TABLE_TO_TABLE               (0x0001)
2727
2728 /* defines for SAS IO Unit Page 1 ReportDeviceMissingDelay */
2729 #define MPI_SAS_IOUNIT1_REPORT_MISSING_TIMEOUT_MASK         (0x7F)
2730 #define MPI_SAS_IOUNIT1_REPORT_MISSING_UNIT_16              (0x80)
2731
2732 /* values for SAS IO Unit Page 1 PortFlags */
2733 #define MPI_SAS_IOUNIT1_PORT_FLAGS_0_TARGET_IOC_NUM         (0x00)
2734 #define MPI_SAS_IOUNIT1_PORT_FLAGS_1_TARGET_IOC_NUM         (0x04)
2735 #define MPI_SAS_IOUNIT1_PORT_FLAGS_AUTO_PORT_CONFIG         (0x01)
2736
2737 /* values for SAS IO Unit Page 0 PhyFlags */
2738 #define MPI_SAS_IOUNIT1_PHY_FLAGS_PHY_DISABLE               (0x04)
2739 #define MPI_SAS_IOUNIT1_PHY_FLAGS_TX_INVERT                 (0x02)
2740 #define MPI_SAS_IOUNIT1_PHY_FLAGS_RX_INVERT                 (0x01)
2741
2742 /* values for SAS IO Unit Page 0 MaxMinLinkRate */
2743 #define MPI_SAS_IOUNIT1_MAX_RATE_MASK                       (0xF0)
2744 #define MPI_SAS_IOUNIT1_MAX_RATE_1_5                        (0x80)
2745 #define MPI_SAS_IOUNIT1_MAX_RATE_3_0                        (0x90)
2746 #define MPI_SAS_IOUNIT1_MIN_RATE_MASK                       (0x0F)
2747 #define MPI_SAS_IOUNIT1_MIN_RATE_1_5                        (0x08)
2748 #define MPI_SAS_IOUNIT1_MIN_RATE_3_0                        (0x09)
2749
2750 /* see mpi_sas.h for values for SAS IO Unit Page 1 ControllerPhyDeviceInfo values */
2751
2752
2753 typedef struct _CONFIG_PAGE_SAS_IO_UNIT_2
2754 {
2755     CONFIG_EXTENDED_PAGE_HEADER         Header;                 /* 00h */
2756     U8                                  NumDevsPerEnclosure;    /* 08h */
2757     U8                                  BootDeviceWaitTime;     /* 09h */
2758     U16                                 Reserved2;              /* 0Ah */
2759     U16                                 MaxPersistentIDs;       /* 0Ch */
2760     U16                                 NumPersistentIDsUsed;   /* 0Eh */
2761     U8                                  Status;                 /* 10h */
2762     U8                                  Flags;                  /* 11h */
2763     U16                                 MaxNumPhysicalMappedIDs;/* 12h */
2764 } CONFIG_PAGE_SAS_IO_UNIT_2, MPI_POINTER PTR_CONFIG_PAGE_SAS_IO_UNIT_2,
2765   SasIOUnitPage2_t, MPI_POINTER pSasIOUnitPage2_t;
2766
2767 #define MPI_SASIOUNITPAGE2_PAGEVERSION      (0x07)
2768
2769 /* values for SAS IO Unit Page 2 Status field */
2770 #define MPI_SAS_IOUNIT2_STATUS_DEVICE_LIMIT_EXCEEDED        (0x08)
2771 #define MPI_SAS_IOUNIT2_STATUS_ENCLOSURE_DEVICES_UNMAPPED   (0x04)
2772 #define MPI_SAS_IOUNIT2_STATUS_DISABLED_PERSISTENT_MAPPINGS (0x02)
2773 #define MPI_SAS_IOUNIT2_STATUS_FULL_PERSISTENT_MAPPINGS     (0x01)
2774
2775 /* values for SAS IO Unit Page 2 Flags field */
2776 #define MPI_SAS_IOUNIT2_FLAGS_DISABLE_PERSISTENT_MAPPINGS   (0x01)
2777 /* Physical Mapping Modes */
2778 #define MPI_SAS_IOUNIT2_FLAGS_MASK_PHYS_MAP_MODE            (0x0E)
2779 #define MPI_SAS_IOUNIT2_FLAGS_SHIFT_PHYS_MAP_MODE           (1)
2780 #define MPI_SAS_IOUNIT2_FLAGS_NO_PHYS_MAP                   (0x00)
2781 #define MPI_SAS_IOUNIT2_FLAGS_DIRECT_ATTACH_PHYS_MAP        (0x01)
2782 #define MPI_SAS_IOUNIT2_FLAGS_ENCLOSURE_SLOT_PHYS_MAP       (0x02)
2783 #define MPI_SAS_IOUNIT2_FLAGS_HOST_ASSIGNED_PHYS_MAP        (0x07)
2784
2785 #define MPI_SAS_IOUNIT2_FLAGS_RESERVE_ID_0_FOR_BOOT         (0x10)
2786 #define MPI_SAS_IOUNIT2_FLAGS_DA_STARTING_SLOT              (0x20)
2787
2788
2789 typedef struct _CONFIG_PAGE_SAS_IO_UNIT_3
2790 {
2791     CONFIG_EXTENDED_PAGE_HEADER Header;                         /* 00h */
2792     U32                         Reserved1;                      /* 08h */
2793     U32                         MaxInvalidDwordCount;           /* 0Ch */
2794     U32                         InvalidDwordCountTime;          /* 10h */
2795     U32                         MaxRunningDisparityErrorCount;  /* 14h */
2796     U32                         RunningDisparityErrorTime;      /* 18h */
2797     U32                         MaxLossDwordSynchCount;         /* 1Ch */
2798     U32                         LossDwordSynchCountTime;        /* 20h */
2799     U32                         MaxPhyResetProblemCount;        /* 24h */
2800     U32                         PhyResetProblemTime;            /* 28h */
2801 } CONFIG_PAGE_SAS_IO_UNIT_3, MPI_POINTER PTR_CONFIG_PAGE_SAS_IO_UNIT_3,
2802   SasIOUnitPage3_t, MPI_POINTER pSasIOUnitPage3_t;
2803
2804 #define MPI_SASIOUNITPAGE3_PAGEVERSION      (0x00)
2805
2806
2807 /****************************************************************************
2808 *   SAS Expander Config Pages
2809 ****************************************************************************/
2810
2811 typedef struct _CONFIG_PAGE_SAS_EXPANDER_0
2812 {
2813     CONFIG_EXTENDED_PAGE_HEADER         Header;                 /* 00h */
2814     U8                                  PhysicalPort;           /* 08h */
2815     U8                                  Reserved1;              /* 09h */
2816     U16                                 EnclosureHandle;        /* 0Ah */
2817     U64                                 SASAddress;             /* 0Ch */
2818     U32                                 DiscoveryStatus;        /* 14h */
2819     U16                                 DevHandle;              /* 18h */
2820     U16                                 ParentDevHandle;        /* 1Ah */
2821     U16                                 ExpanderChangeCount;    /* 1Ch */
2822     U16                                 ExpanderRouteIndexes;   /* 1Eh */
2823     U8                                  NumPhys;                /* 20h */
2824     U8                                  SASLevel;               /* 21h */
2825     U8                                  Flags;                  /* 22h */
2826     U8                                  Reserved3;              /* 23h */
2827 } CONFIG_PAGE_SAS_EXPANDER_0, MPI_POINTER PTR_CONFIG_PAGE_SAS_EXPANDER_0,
2828   SasExpanderPage0_t, MPI_POINTER pSasExpanderPage0_t;
2829
2830 #define MPI_SASEXPANDER0_PAGEVERSION        (0x03)
2831
2832 /* values for SAS Expander Page 0 DiscoveryStatus field */
2833 #define MPI_SAS_EXPANDER0_DS_LOOP_DETECTED              (0x00000001)
2834 #define MPI_SAS_EXPANDER0_DS_UNADDRESSABLE_DEVICE       (0x00000002)
2835 #define MPI_SAS_EXPANDER0_DS_MULTIPLE_PORTS             (0x00000004)
2836 #define MPI_SAS_EXPANDER0_DS_EXPANDER_ERR               (0x00000008)
2837 #define MPI_SAS_EXPANDER0_DS_SMP_TIMEOUT                (0x00000010)
2838 #define MPI_SAS_EXPANDER0_DS_OUT_ROUTE_ENTRIES          (0x00000020)
2839 #define MPI_SAS_EXPANDER0_DS_INDEX_NOT_EXIST            (0x00000040)
2840 #define MPI_SAS_EXPANDER0_DS_SMP_FUNCTION_FAILED        (0x00000080)
2841 #define MPI_SAS_EXPANDER0_DS_SMP_CRC_ERROR              (0x00000100)
2842 #define MPI_SAS_EXPANDER0_DS_SUBTRACTIVE_LINK           (0x00000200)
2843 #define MPI_SAS_EXPANDER0_DS_TABLE_LINK                 (0x00000400)
2844 #define MPI_SAS_EXPANDER0_DS_UNSUPPORTED_DEVICE         (0x00000800)
2845
2846 /* values for SAS Expander Page 0 Flags field */
2847 #define MPI_SAS_EXPANDER0_FLAGS_CONNECTOR_END_DEVICE    (0x04)
2848 #define MPI_SAS_EXPANDER0_FLAGS_ROUTE_TABLE_CONFIG      (0x02)
2849 #define MPI_SAS_EXPANDER0_FLAGS_CONFIG_IN_PROGRESS      (0x01)
2850
2851
2852 typedef struct _CONFIG_PAGE_SAS_EXPANDER_1
2853 {
2854     CONFIG_EXTENDED_PAGE_HEADER Header;                 /* 00h */
2855     U8                          PhysicalPort;           /* 08h */
2856     U8                          Reserved1;              /* 09h */
2857     U16                         Reserved2;              /* 0Ah */
2858     U8                          NumPhys;                /* 0Ch */
2859     U8                          Phy;                    /* 0Dh */
2860     U16                         NumTableEntriesProgrammed; /* 0Eh */
2861     U8                          ProgrammedLinkRate;     /* 10h */
2862     U8                          HwLinkRate;             /* 11h */
2863     U16                         AttachedDevHandle;      /* 12h */
2864     U32                         PhyInfo;                /* 14h */
2865     U32                         AttachedDeviceInfo;     /* 18h */
2866     U16                         OwnerDevHandle;         /* 1Ch */
2867     U8                          ChangeCount;            /* 1Eh */
2868     U8                          NegotiatedLinkRate;     /* 1Fh */
2869     U8                          PhyIdentifier;          /* 20h */
2870     U8                          AttachedPhyIdentifier;  /* 21h */
2871     U8                          Reserved3;              /* 22h */
2872     U8                          DiscoveryInfo;          /* 23h */
2873     U32                         Reserved4;              /* 24h */
2874 } CONFIG_PAGE_SAS_EXPANDER_1, MPI_POINTER PTR_CONFIG_PAGE_SAS_EXPANDER_1,
2875   SasExpanderPage1_t, MPI_POINTER pSasExpanderPage1_t;
2876
2877 #define MPI_SASEXPANDER1_PAGEVERSION        (0x01)
2878
2879 /* use MPI_SAS_PHY0_PRATE_ defines for ProgrammedLinkRate */
2880
2881 /* use MPI_SAS_PHY0_HWRATE_ defines for HwLinkRate */
2882
2883 /* use MPI_SAS_PHY0_PHYINFO_ defines for PhyInfo */
2884
2885 /* see mpi_sas.h for values for SAS Expander Page 1 AttachedDeviceInfo values */
2886
2887 /* values for SAS Expander Page 1 DiscoveryInfo field */
2888 #define MPI_SAS_EXPANDER1_DISCINFO_BAD_PHY_DISABLED     (0x04)
2889 #define MPI_SAS_EXPANDER1_DISCINFO_LINK_STATUS_CHANGE   (0x02)
2890 #define MPI_SAS_EXPANDER1_DISCINFO_NO_ROUTING_ENTRIES   (0x01)
2891
2892 /* values for SAS Expander Page 1 NegotiatedLinkRate field */
2893 #define MPI_SAS_EXPANDER1_NEG_RATE_UNKNOWN              (0x00)
2894 #define MPI_SAS_EXPANDER1_NEG_RATE_PHY_DISABLED         (0x01)
2895 #define MPI_SAS_EXPANDER1_NEG_RATE_FAILED_NEGOTIATION   (0x02)
2896 #define MPI_SAS_EXPANDER1_NEG_RATE_SATA_OOB_COMPLETE    (0x03)
2897 #define MPI_SAS_EXPANDER1_NEG_RATE_1_5                  (0x08)
2898 #define MPI_SAS_EXPANDER1_NEG_RATE_3_0                  (0x09)
2899
2900
2901 /****************************************************************************
2902 *   SAS Device Config Pages
2903 ****************************************************************************/
2904
2905 typedef struct _CONFIG_PAGE_SAS_DEVICE_0
2906 {
2907     CONFIG_EXTENDED_PAGE_HEADER         Header;                 /* 00h */
2908     U16                                 Slot;                   /* 08h */
2909     U16                                 EnclosureHandle;        /* 0Ah */
2910     U64                                 SASAddress;             /* 0Ch */
2911     U16                                 ParentDevHandle;        /* 14h */
2912     U8                                  PhyNum;                 /* 16h */
2913     U8                                  AccessStatus;           /* 17h */
2914     U16                                 DevHandle;              /* 18h */
2915     U8                                  TargetID;               /* 1Ah */
2916     U8                                  Bus;                    /* 1Bh */
2917     U32                                 DeviceInfo;             /* 1Ch */
2918     U16                                 Flags;                  /* 20h */
2919     U8                                  PhysicalPort;           /* 22h */
2920     U8                                  Reserved2;              /* 23h */
2921 } CONFIG_PAGE_SAS_DEVICE_0, MPI_POINTER PTR_CONFIG_PAGE_SAS_DEVICE_0,
2922   SasDevicePage0_t, MPI_POINTER pSasDevicePage0_t;
2923
2924 #define MPI_SASDEVICE0_PAGEVERSION          (0x05)
2925
2926 /* values for SAS Device Page 0 AccessStatus field */
2927 #define MPI_SAS_DEVICE0_ASTATUS_NO_ERRORS                   (0x00)
2928 #define MPI_SAS_DEVICE0_ASTATUS_SATA_INIT_FAILED            (0x01)
2929 #define MPI_SAS_DEVICE0_ASTATUS_SATA_CAPABILITY_FAILED      (0x02)
2930 #define MPI_SAS_DEVICE0_ASTATUS_SATA_AFFILIATION_CONFLICT   (0x03)
2931 #define MPI_SAS_DEVICE0_ASTATUS_SATA_NEEDS_INITIALIZATION   (0x04)
2932 /* specific values for SATA Init failures */
2933 #define MPI_SAS_DEVICE0_ASTATUS_SIF_UNKNOWN                 (0x10)
2934 #define MPI_SAS_DEVICE0_ASTATUS_SIF_AFFILIATION_CONFLICT    (0x11)
2935 #define MPI_SAS_DEVICE0_ASTATUS_SIF_DIAG                    (0x12)
2936 #define MPI_SAS_DEVICE0_ASTATUS_SIF_IDENTIFICATION          (0x13)
2937 #define MPI_SAS_DEVICE0_ASTATUS_SIF_CHECK_POWER             (0x14)
2938 #define MPI_SAS_DEVICE0_ASTATUS_SIF_PIO_SN                  (0x15)
2939 #define MPI_SAS_DEVICE0_ASTATUS_SIF_MDMA_SN                 (0x16)
2940 #define MPI_SAS_DEVICE0_ASTATUS_SIF_UDMA_SN                 (0x17)
2941 #define MPI_SAS_DEVICE0_ASTATUS_SIF_ZONING_VIOLATION        (0x18)
2942 #define MPI_SAS_DEVICE0_ASTATUS_SIF_NOT_ADDRESSABLE         (0x19)
2943 #define MPI_SAS_DEVICE0_ASTATUS_SIF_MAX                     (0x1F)
2944
2945 /* values for SAS Device Page 0 Flags field */
2946 #define MPI_SAS_DEVICE0_FLAGS_SATA_ASYNCHRONOUS_NOTIFY      (0x0400)
2947 #define MPI_SAS_DEVICE0_FLAGS_SATA_SW_PRESERVE              (0x0200)
2948 #define MPI_SAS_DEVICE0_FLAGS_UNSUPPORTED_DEVICE            (0x0100)
2949 #define MPI_SAS_DEVICE0_FLAGS_SATA_48BIT_LBA_SUPPORTED      (0x0080)
2950 #define MPI_SAS_DEVICE0_FLAGS_SATA_SMART_SUPPORTED          (0x0040)
2951 #define MPI_SAS_DEVICE0_FLAGS_SATA_NCQ_SUPPORTED            (0x0020)
2952 #define MPI_SAS_DEVICE0_FLAGS_SATA_FUA_SUPPORTED            (0x0010)
2953 #define MPI_SAS_DEVICE0_FLAGS_PORT_SELECTOR_ATTACH          (0x0008)
2954 #define MPI_SAS_DEVICE0_FLAGS_MAPPING_PERSISTENT            (0x0004)
2955 #define MPI_SAS_DEVICE0_FLAGS_DEVICE_MAPPED                 (0x0002)
2956 #define MPI_SAS_DEVICE0_FLAGS_DEVICE_PRESENT                (0x0001)
2957
2958 /* see mpi_sas.h for values for SAS Device Page 0 DeviceInfo values */
2959
2960
2961 typedef struct _CONFIG_PAGE_SAS_DEVICE_1
2962 {
2963     CONFIG_EXTENDED_PAGE_HEADER         Header;                 /* 00h */
2964     U32                                 Reserved1;              /* 08h */
2965     U64                                 SASAddress;             /* 0Ch */
2966     U32                                 Reserved2;              /* 14h */
2967     U16                                 DevHandle;              /* 18h */
2968     U8                                  TargetID;               /* 1Ah */
2969     U8                                  Bus;                    /* 1Bh */
2970     U8                                  InitialRegDeviceFIS[20];/* 1Ch */
2971 } CONFIG_PAGE_SAS_DEVICE_1, MPI_POINTER PTR_CONFIG_PAGE_SAS_DEVICE_1,
2972   SasDevicePage1_t, MPI_POINTER pSasDevicePage1_t;
2973
2974 #define MPI_SASDEVICE1_PAGEVERSION          (0x00)
2975
2976
2977 typedef struct _CONFIG_PAGE_SAS_DEVICE_2
2978 {
2979     CONFIG_EXTENDED_PAGE_HEADER         Header;                 /* 00h */
2980     U64                                 PhysicalIdentifier;     /* 08h */
2981     U32                                 EnclosureMapping;       /* 10h */
2982 } CONFIG_PAGE_SAS_DEVICE_2, MPI_POINTER PTR_CONFIG_PAGE_SAS_DEVICE_2,
2983   SasDevicePage2_t, MPI_POINTER pSasDevicePage2_t;
2984
2985 #define MPI_SASDEVICE2_PAGEVERSION          (0x01)
2986
2987 /* defines for SAS Device Page 2 EnclosureMapping field */
2988 #define MPI_SASDEVICE2_ENC_MAP_MASK_MISSING_COUNT       (0x0000000F)
2989 #define MPI_SASDEVICE2_ENC_MAP_SHIFT_MISSING_COUNT      (0)
2990 #define MPI_SASDEVICE2_ENC_MAP_MASK_NUM_SLOTS           (0x000007F0)
2991 #define MPI_SASDEVICE2_ENC_MAP_SHIFT_NUM_SLOTS          (4)
2992 #define MPI_SASDEVICE2_ENC_MAP_MASK_START_INDEX         (0x001FF800)
2993 #define MPI_SASDEVICE2_ENC_MAP_SHIFT_START_INDEX        (11)
2994
2995
2996 /****************************************************************************
2997 *   SAS PHY Config Pages
2998 ****************************************************************************/
2999
3000 typedef struct _CONFIG_PAGE_SAS_PHY_0
3001 {
3002     CONFIG_EXTENDED_PAGE_HEADER         Header;                 /* 00h */
3003     U16                                 OwnerDevHandle;         /* 08h */
3004     U16                                 Reserved1;              /* 0Ah */
3005     U64                                 SASAddress;             /* 0Ch */
3006     U16                                 AttachedDevHandle;      /* 14h */
3007     U8                                  AttachedPhyIdentifier;  /* 16h */
3008     U8                                  Reserved2;              /* 17h */
3009     U32                                 AttachedDeviceInfo;     /* 18h */
3010     U8                                  ProgrammedLinkRate;     /* 1Ch */
3011     U8                                  HwLinkRate;             /* 1Dh */
3012     U8                                  ChangeCount;            /* 1Eh */
3013     U8                                  Flags;                  /* 1Fh */
3014     U32                                 PhyInfo;                /* 20h */
3015 } CONFIG_PAGE_SAS_PHY_0, MPI_POINTER PTR_CONFIG_PAGE_SAS_PHY_0,
3016   SasPhyPage0_t, MPI_POINTER pSasPhyPage0_t;
3017
3018 #define MPI_SASPHY0_PAGEVERSION             (0x01)
3019
3020 /* values for SAS PHY Page 0 ProgrammedLinkRate field */
3021 #define MPI_SAS_PHY0_PRATE_MAX_RATE_MASK                        (0xF0)
3022 #define MPI_SAS_PHY0_PRATE_MAX_RATE_NOT_PROGRAMMABLE            (0x00)
3023 #define MPI_SAS_PHY0_PRATE_MAX_RATE_1_5                         (0x80)
3024 #define MPI_SAS_PHY0_PRATE_MAX_RATE_3_0                         (0x90)
3025 #define MPI_SAS_PHY0_PRATE_MIN_RATE_MASK                        (0x0F)
3026 #define MPI_SAS_PHY0_PRATE_MIN_RATE_NOT_PROGRAMMABLE            (0x00)
3027 #define MPI_SAS_PHY0_PRATE_MIN_RATE_1_5                         (0x08)
3028 #define MPI_SAS_PHY0_PRATE_MIN_RATE_3_0                         (0x09)
3029
3030 /* values for SAS PHY Page 0 HwLinkRate field */
3031 #define MPI_SAS_PHY0_HWRATE_MAX_RATE_MASK                       (0xF0)
3032 #define MPI_SAS_PHY0_HWRATE_MAX_RATE_1_5                        (0x80)
3033 #define MPI_SAS_PHY0_HWRATE_MAX_RATE_3_0                        (0x90)
3034 #define MPI_SAS_PHY0_HWRATE_MIN_RATE_MASK                       (0x0F)
3035 #define MPI_SAS_PHY0_HWRATE_MIN_RATE_1_5                        (0x08)
3036 #define MPI_SAS_PHY0_HWRATE_MIN_RATE_3_0                        (0x09)
3037
3038 /* values for SAS PHY Page 0 Flags field */
3039 #define MPI_SAS_PHY0_FLAGS_SGPIO_DIRECT_ATTACH_ENC              (0x01)
3040
3041 /* values for SAS PHY Page 0 PhyInfo field */
3042 #define MPI_SAS_PHY0_PHYINFO_PHY_VACANT                         (0x80000000)
3043 #define MPI_SAS_PHY0_PHYINFO_SATA_PORT_ACTIVE                   (0x00004000)
3044 #define MPI_SAS_PHY0_PHYINFO_SATA_PORT_SELECTOR                 (0x00002000)
3045 #define MPI_SAS_PHY0_PHYINFO_VIRTUAL_PHY                        (0x00001000)
3046
3047 #define MPI_SAS_PHY0_PHYINFO_MASK_PARTIAL_PATHWAY_TIME          (0x00000F00)
3048 #define MPI_SAS_PHY0_PHYINFO_SHIFT_PARTIAL_PATHWAY_TIME         (8)
3049
3050 #define MPI_SAS_PHY0_PHYINFO_MASK_ROUTING_ATTRIBUTE             (0x000000F0)
3051 #define MPI_SAS_PHY0_PHYINFO_DIRECT_ROUTING                     (0x00000000)
3052 #define MPI_SAS_PHY0_PHYINFO_SUBTRACTIVE_ROUTING                (0x00000010)
3053 #define MPI_SAS_PHY0_PHYINFO_TABLE_ROUTING                      (0x00000020)
3054
3055 #define MPI_SAS_PHY0_PHYINFO_MASK_LINK_RATE                     (0x0000000F)
3056 #define MPI_SAS_PHY0_PHYINFO_UNKNOWN_LINK_RATE                  (0x00000000)
3057 #define MPI_SAS_PHY0_PHYINFO_PHY_DISABLED                       (0x00000001)
3058 #define MPI_SAS_PHY0_PHYINFO_NEGOTIATION_FAILED                 (0x00000002)
3059 #define MPI_SAS_PHY0_PHYINFO_SATA_OOB_COMPLETE                  (0x00000003)
3060 #define MPI_SAS_PHY0_PHYINFO_RATE_1_5                           (0x00000008)
3061 #define MPI_SAS_PHY0_PHYINFO_RATE_3_0                           (0x00000009)
3062
3063
3064 typedef struct _CONFIG_PAGE_SAS_PHY_1
3065 {
3066     CONFIG_EXTENDED_PAGE_HEADER Header;                     /* 00h */
3067     U32                         Reserved1;                  /* 08h */
3068     U32                         InvalidDwordCount;          /* 0Ch */
3069     U32                         RunningDisparityErrorCount; /* 10h */
3070     U32                         LossDwordSynchCount;        /* 14h */
3071     U32                         PhyResetProblemCount;       /* 18h */
3072 } CONFIG_PAGE_SAS_PHY_1, MPI_POINTER PTR_CONFIG_PAGE_SAS_PHY_1,
3073   SasPhyPage1_t, MPI_POINTER pSasPhyPage1_t;
3074
3075 #define MPI_SASPHY1_PAGEVERSION             (0x00)
3076
3077
3078 /****************************************************************************
3079 *   SAS Enclosure Config Pages
3080 ****************************************************************************/
3081
3082 typedef struct _CONFIG_PAGE_SAS_ENCLOSURE_0
3083 {
3084     CONFIG_EXTENDED_PAGE_HEADER         Header;                 /* 00h */
3085     U32                                 Reserved1;              /* 08h */
3086     U64                                 EnclosureLogicalID;     /* 0Ch */
3087     U16                                 Flags;                  /* 14h */
3088     U16                                 EnclosureHandle;        /* 16h */
3089     U16                                 NumSlots;               /* 18h */
3090     U16                                 StartSlot;              /* 1Ah */
3091     U8                                  StartTargetID;          /* 1Ch */
3092     U8                                  StartBus;               /* 1Dh */
3093     U8                                  SEPTargetID;            /* 1Eh */
3094     U8                                  SEPBus;                 /* 1Fh */
3095     U32                                 Reserved2;              /* 20h */
3096     U32                                 Reserved3;              /* 24h */
3097 } CONFIG_PAGE_SAS_ENCLOSURE_0, MPI_POINTER PTR_CONFIG_PAGE_SAS_ENCLOSURE_0,
3098   SasEnclosurePage0_t, MPI_POINTER pSasEnclosurePage0_t;
3099
3100 #define MPI_SASENCLOSURE0_PAGEVERSION       (0x01)
3101
3102 /* values for SAS Enclosure Page 0 Flags field */
3103 #define MPI_SAS_ENCLS0_FLAGS_SEP_BUS_ID_VALID       (0x0020)
3104 #define MPI_SAS_ENCLS0_FLAGS_START_BUS_ID_VALID     (0x0010)
3105
3106 #define MPI_SAS_ENCLS0_FLAGS_MNG_MASK               (0x000F)
3107 #define MPI_SAS_ENCLS0_FLAGS_MNG_UNKNOWN            (0x0000)
3108 #define MPI_SAS_ENCLS0_FLAGS_MNG_IOC_SES            (0x0001)
3109 #define MPI_SAS_ENCLS0_FLAGS_MNG_IOC_SGPIO          (0x0002)
3110 #define MPI_SAS_ENCLS0_FLAGS_MNG_EXP_SGPIO          (0x0003)
3111 #define MPI_SAS_ENCLS0_FLAGS_MNG_SES_ENCLOSURE      (0x0004)
3112 #define MPI_SAS_ENCLS0_FLAGS_MNG_IOC_GPIO           (0x0005)
3113
3114
3115 /****************************************************************************
3116 *   Log Config Pages
3117 ****************************************************************************/
3118 /*
3119  * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
3120  * one and check NumLogEntries at runtime.
3121  */
3122 #ifndef MPI_LOG_0_NUM_LOG_ENTRIES
3123 #define MPI_LOG_0_NUM_LOG_ENTRIES        (1)
3124 #endif
3125
3126 #define MPI_LOG_0_LOG_DATA_LENGTH        (0x1C)
3127
3128 typedef struct _MPI_LOG_0_ENTRY
3129 {
3130     U32         TimeStamp;                          /* 00h */
3131     U32         Reserved1;                          /* 04h */
3132     U16         LogSequence;                        /* 08h */
3133     U16         LogEntryQualifier;                  /* 0Ah */
3134     U8          LogData[MPI_LOG_0_LOG_DATA_LENGTH]; /* 0Ch */
3135 } MPI_LOG_0_ENTRY, MPI_POINTER PTR_MPI_LOG_0_ENTRY,
3136   MpiLog0Entry_t, MPI_POINTER pMpiLog0Entry_t;
3137
3138 /* values for Log Page 0 LogEntry LogEntryQualifier field */
3139 #define MPI_LOG_0_ENTRY_QUAL_ENTRY_UNUSED           (0x0000)
3140 #define MPI_LOG_0_ENTRY_QUAL_POWER_ON_RESET         (0x0001)
3141
3142 typedef struct _CONFIG_PAGE_LOG_0
3143 {
3144     CONFIG_EXTENDED_PAGE_HEADER Header;                     /* 00h */
3145     U32                         Reserved1;                  /* 08h */
3146     U32                         Reserved2;                  /* 0Ch */
3147     U16                         NumLogEntries;              /* 10h */
3148     U16                         Reserved3;                  /* 12h */
3149     MPI_LOG_0_ENTRY             LogEntry[MPI_LOG_0_NUM_LOG_ENTRIES]; /* 14h */
3150 } CONFIG_PAGE_LOG_0, MPI_POINTER PTR_CONFIG_PAGE_LOG_0,
3151   LogPage0_t, MPI_POINTER pLogPage0_t;
3152
3153 #define MPI_LOG_0_PAGEVERSION               (0x01)
3154
3155
3156 #endif
3157