2 * Copyright (c) 2001 Wind River Systems
3 * Copyright (c) 1997, 1998, 1999, 2001
4 * Bill Paul <wpaul@windriver.com>. All rights reserved.
6 * Redistribution and use in source and binary forms, with or without
7 * modification, are permitted provided that the following conditions
9 * 1. Redistributions of source code must retain the above copyright
10 * notice, this list of conditions and the following disclaimer.
11 * 2. Redistributions in binary form must reproduce the above copyright
12 * notice, this list of conditions and the following disclaimer in the
13 * documentation and/or other materials provided with the distribution.
14 * 3. All advertising materials mentioning features or use of this software
15 * must display the following acknowledgement:
16 * This product includes software developed by Bill Paul.
17 * 4. Neither the name of the author nor the names of any co-contributors
18 * may be used to endorse or promote products derived from this software
19 * without specific prior written permission.
21 * THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND
22 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
23 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
24 * ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD
25 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
26 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
27 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
28 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
29 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
30 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
31 * THE POSSIBILITY OF SUCH DAMAGE.
33 * $FreeBSD: src/sys/dev/bge/if_bge.c,v 1.3.2.29 2003/12/01 21:06:59 ambrisko Exp $
34 * $DragonFly: src/sys/dev/netif/bge/if_bge.c,v 1.59 2006/12/20 18:14:39 dillon Exp $
39 * Broadcom BCM570x family gigabit ethernet driver for FreeBSD.
41 * Written by Bill Paul <wpaul@windriver.com>
42 * Senior Engineer, Wind River Systems
46 * The Broadcom BCM5700 is based on technology originally developed by
47 * Alteon Networks as part of the Tigon I and Tigon II gigabit ethernet
48 * MAC chips. The BCM5700, sometimes refered to as the Tigon III, has
49 * two on-board MIPS R4000 CPUs and can have as much as 16MB of external
50 * SSRAM. The BCM5700 supports TCP, UDP and IP checksum offload, jumbo
51 * frames, highly configurable RX filtering, and 16 RX and TX queues
52 * (which, along with RX filter rules, can be used for QOS applications).
53 * Other features, such as TCP segmentation, may be available as part
54 * of value-added firmware updates. Unlike the Tigon I and Tigon II,
55 * firmware images can be stored in hardware and need not be compiled
58 * The BCM5700 supports the PCI v2.2 and PCI-X v1.0 standards, and will
59 * function in a 32-bit/64-bit 33/66Mhz bus, or a 64-bit/133Mhz bus.
61 * The BCM5701 is a single-chip solution incorporating both the BCM5700
62 * MAC and a BCM5401 10/100/1000 PHY. Unlike the BCM5700, the BCM5701
63 * does not support external SSRAM.
65 * Broadcom also produces a variation of the BCM5700 under the "Altima"
66 * brand name, which is functionally similar but lacks PCI-X support.
68 * Without external SSRAM, you can only have at most 4 TX rings,
69 * and the use of the mini RX ring is disabled. This seems to imply
70 * that these features are simply not available on the BCM5701. As a
71 * result, this driver does not implement any support for the mini RX
75 #include <sys/param.h>
76 #include <sys/systm.h>
77 #include <sys/sockio.h>
79 #include <sys/malloc.h>
80 #include <sys/kernel.h>
81 #include <sys/socket.h>
82 #include <sys/queue.h>
83 #include <sys/serialize.h>
84 #include <sys/thread2.h>
87 #include <net/ifq_var.h>
88 #include <net/if_arp.h>
89 #include <net/ethernet.h>
90 #include <net/if_dl.h>
91 #include <net/if_media.h>
95 #include <net/if_types.h>
96 #include <net/vlan/if_vlan_var.h>
98 #include <netinet/in_systm.h>
99 #include <netinet/in.h>
100 #include <netinet/ip.h>
102 #include <vm/vm.h> /* for vtophys */
103 #include <vm/pmap.h> /* for vtophys */
105 #include <sys/rman.h>
107 #include <dev/netif/mii_layer/mii.h>
108 #include <dev/netif/mii_layer/miivar.h>
109 #include <dev/netif/mii_layer/miidevs.h>
110 #include <dev/netif/mii_layer/brgphyreg.h>
112 #include <bus/pci/pcidevs.h>
113 #include <bus/pci/pcireg.h>
114 #include <bus/pci/pcivar.h>
116 #include "if_bgereg.h"
118 #define BGE_CSUM_FEATURES (CSUM_IP | CSUM_TCP | CSUM_UDP)
120 /* "controller miibus0" required. See GENERIC if you get errors here. */
121 #include "miibus_if.h"
124 * Various supported device vendors/types and their names. Note: the
125 * spec seems to indicate that the hardware still has Alteon's vendor
126 * ID burned into it, though it will always be overriden by the vendor
127 * ID in the EEPROM. Just to be safe, we cover all possibilities.
129 #define BGE_DEVDESC_MAX 64 /* Maximum device description length */
131 static struct bge_type bge_devs[] = {
132 { PCI_VENDOR_ALTEON, PCI_PRODUCT_ALTEON_BCM5700,
133 "Alteon BCM5700 Gigabit Ethernet" },
134 { PCI_VENDOR_ALTEON, PCI_PRODUCT_ALTEON_BCM5701,
135 "Alteon BCM5701 Gigabit Ethernet" },
136 { PCI_VENDOR_BROADCOM, PCI_PRODUCT_BROADCOM_BCM5700,
137 "Broadcom BCM5700 Gigabit Ethernet" },
138 { PCI_VENDOR_BROADCOM, PCI_PRODUCT_BROADCOM_BCM5701,
139 "Broadcom BCM5701 Gigabit Ethernet" },
140 { PCI_VENDOR_BROADCOM, PCI_PRODUCT_BROADCOM_BCM5702X,
141 "Broadcom BCM5702X Gigabit Ethernet" },
142 { PCI_VENDOR_BROADCOM, PCI_PRODUCT_BROADCOM_BCM5702_ALT,
143 "Broadcom BCM5702 Gigabit Ethernet" },
144 { PCI_VENDOR_BROADCOM, PCI_PRODUCT_BROADCOM_BCM5703X,
145 "Broadcom BCM5703X Gigabit Ethernet" },
146 { PCI_VENDOR_BROADCOM, PCI_PRODUCT_BROADCOM_BCM5703A3,
147 "Broadcom BCM5703 Gigabit Ethernet" },
148 { PCI_VENDOR_BROADCOM, PCI_PRODUCT_BROADCOM_BCM5704C,
149 "Broadcom BCM5704C Dual Gigabit Ethernet" },
150 { PCI_VENDOR_BROADCOM, PCI_PRODUCT_BROADCOM_BCM5704S,
151 "Broadcom BCM5704S Dual Gigabit Ethernet" },
152 { PCI_VENDOR_BROADCOM, PCI_PRODUCT_BROADCOM_BCM5705,
153 "Broadcom BCM5705 Gigabit Ethernet" },
154 { PCI_VENDOR_BROADCOM, PCI_PRODUCT_BROADCOM_BCM5705K,
155 "Broadcom BCM5705K Gigabit Ethernet" },
156 { PCI_VENDOR_BROADCOM, PCI_PRODUCT_BROADCOM_BCM5705M,
157 "Broadcom BCM5705M Gigabit Ethernet" },
158 { PCI_VENDOR_BROADCOM, PCI_PRODUCT_BROADCOM_BCM5705M_ALT,
159 "Broadcom BCM5705M Gigabit Ethernet" },
160 { PCI_VENDOR_BROADCOM, PCI_PRODUCT_BROADCOM_BCM5714,
161 "Broadcom BCM5714C Gigabit Ethernet" },
162 { PCI_VENDOR_BROADCOM, PCI_PRODUCT_BROADCOM_BCM5721,
163 "Broadcom BCM5721 Gigabit Ethernet" },
164 { PCI_VENDOR_BROADCOM, PCI_PRODUCT_BROADCOM_BCM5750,
165 "Broadcom BCM5750 Gigabit Ethernet" },
166 { PCI_VENDOR_BROADCOM, PCI_PRODUCT_BROADCOM_BCM5750M,
167 "Broadcom BCM5750M Gigabit Ethernet" },
168 { PCI_VENDOR_BROADCOM, PCI_PRODUCT_BROADCOM_BCM5751,
169 "Broadcom BCM5751 Gigabit Ethernet" },
170 { PCI_VENDOR_BROADCOM, PCI_PRODUCT_BROADCOM_BCM5751M,
171 "Broadcom BCM5751M Gigabit Ethernet" },
172 { PCI_VENDOR_BROADCOM, PCI_PRODUCT_BROADCOM_BCM5782,
173 "Broadcom BCM5782 Gigabit Ethernet" },
174 { PCI_VENDOR_BROADCOM, PCI_PRODUCT_BROADCOM_BCM5788,
175 "Broadcom BCM5788 Gigabit Ethernet" },
176 { PCI_VENDOR_BROADCOM, PCI_PRODUCT_BROADCOM_BCM5789,
177 "Broadcom BCM5789 Gigabit Ethernet" },
178 { PCI_VENDOR_BROADCOM, PCI_PRODUCT_BROADCOM_BCM5901,
179 "Broadcom BCM5901 Fast Ethernet" },
180 { PCI_VENDOR_BROADCOM, PCI_PRODUCT_BROADCOM_BCM5901A2,
181 "Broadcom BCM5901A2 Fast Ethernet" },
182 { PCI_VENDOR_SCHNEIDERKOCH, PCI_PRODUCT_SCHNEIDERKOCH_SK_9DX1,
183 "SysKonnect Gigabit Ethernet" },
184 { PCI_VENDOR_ALTIMA, PCI_PRODUCT_ALTIMA_AC1000,
185 "Altima AC1000 Gigabit Ethernet" },
186 { PCI_VENDOR_ALTIMA, PCI_PRODUCT_ALTIMA_AC1001,
187 "Altima AC1002 Gigabit Ethernet" },
188 { PCI_VENDOR_ALTIMA, PCI_PRODUCT_ALTIMA_AC9100,
189 "Altima AC9100 Gigabit Ethernet" },
193 static int bge_probe(device_t);
194 static int bge_attach(device_t);
195 static int bge_detach(device_t);
196 static void bge_release_resources(struct bge_softc *);
197 static void bge_txeof(struct bge_softc *);
198 static void bge_rxeof(struct bge_softc *);
200 static void bge_tick(void *);
201 static void bge_tick_serialized(void *);
202 static void bge_stats_update(struct bge_softc *);
203 static void bge_stats_update_regs(struct bge_softc *);
204 static int bge_encap(struct bge_softc *, struct mbuf *, uint32_t *);
206 static void bge_intr(void *);
207 static void bge_start(struct ifnet *);
208 static int bge_ioctl(struct ifnet *, u_long, caddr_t, struct ucred *);
209 static void bge_init(void *);
210 static void bge_stop(struct bge_softc *);
211 static void bge_watchdog(struct ifnet *);
212 static void bge_shutdown(device_t);
213 static int bge_ifmedia_upd(struct ifnet *);
214 static void bge_ifmedia_sts(struct ifnet *, struct ifmediareq *);
216 static uint8_t bge_eeprom_getbyte(struct bge_softc *, uint32_t, uint8_t *);
217 static int bge_read_eeprom(struct bge_softc *, caddr_t, uint32_t, size_t);
219 static void bge_setmulti(struct bge_softc *);
221 static void bge_handle_events(struct bge_softc *);
222 static int bge_alloc_jumbo_mem(struct bge_softc *);
223 static void bge_free_jumbo_mem(struct bge_softc *);
224 static struct bge_jslot
225 *bge_jalloc(struct bge_softc *);
226 static void bge_jfree(void *);
227 static void bge_jref(void *);
228 static int bge_newbuf_std(struct bge_softc *, int, struct mbuf *);
229 static int bge_newbuf_jumbo(struct bge_softc *, int, struct mbuf *);
230 static int bge_init_rx_ring_std(struct bge_softc *);
231 static void bge_free_rx_ring_std(struct bge_softc *);
232 static int bge_init_rx_ring_jumbo(struct bge_softc *);
233 static void bge_free_rx_ring_jumbo(struct bge_softc *);
234 static void bge_free_tx_ring(struct bge_softc *);
235 static int bge_init_tx_ring(struct bge_softc *);
237 static int bge_chipinit(struct bge_softc *);
238 static int bge_blockinit(struct bge_softc *);
241 static uint8_t bge_vpd_readbyte(struct bge_softc *, uint32_t);
242 static void bge_vpd_read_res(struct bge_softc *, struct vpd_res *, uint32_t);
243 static void bge_vpd_read(struct bge_softc *);
246 static uint32_t bge_readmem_ind(struct bge_softc *, uint32_t);
247 static void bge_writemem_ind(struct bge_softc *, uint32_t, uint32_t);
249 static uint32_t bge_readreg_ind(struct bge_softc *, uint32_t);
251 static void bge_writereg_ind(struct bge_softc *, uint32_t, uint32_t);
253 static int bge_miibus_readreg(device_t, int, int);
254 static int bge_miibus_writereg(device_t, int, int, int);
255 static void bge_miibus_statchg(device_t);
257 static void bge_reset(struct bge_softc *);
260 * Set following tunable to 1 for some IBM blade servers with the DNLK
261 * switch module. Auto negotiation is broken for those configurations.
263 static int bge_fake_autoneg = 0;
264 TUNABLE_INT("hw.bge.fake_autoneg", &bge_fake_autoneg);
266 static device_method_t bge_methods[] = {
267 /* Device interface */
268 DEVMETHOD(device_probe, bge_probe),
269 DEVMETHOD(device_attach, bge_attach),
270 DEVMETHOD(device_detach, bge_detach),
271 DEVMETHOD(device_shutdown, bge_shutdown),
274 DEVMETHOD(bus_print_child, bus_generic_print_child),
275 DEVMETHOD(bus_driver_added, bus_generic_driver_added),
278 DEVMETHOD(miibus_readreg, bge_miibus_readreg),
279 DEVMETHOD(miibus_writereg, bge_miibus_writereg),
280 DEVMETHOD(miibus_statchg, bge_miibus_statchg),
285 static DEFINE_CLASS_0(bge, bge_driver, bge_methods, sizeof(struct bge_softc));
286 static devclass_t bge_devclass;
288 DECLARE_DUMMY_MODULE(if_bge);
289 DRIVER_MODULE(if_bge, pci, bge_driver, bge_devclass, 0, 0);
290 DRIVER_MODULE(miibus, bge, miibus_driver, miibus_devclass, 0, 0);
293 bge_readmem_ind(struct bge_softc *sc, uint32_t off)
295 device_t dev = sc->bge_dev;
297 pci_write_config(dev, BGE_PCI_MEMWIN_BASEADDR, off, 4);
298 return(pci_read_config(dev, BGE_PCI_MEMWIN_DATA, 4));
302 bge_writemem_ind(struct bge_softc *sc, uint32_t off, uint32_t val)
304 device_t dev = sc->bge_dev;
306 pci_write_config(dev, BGE_PCI_MEMWIN_BASEADDR, off, 4);
307 pci_write_config(dev, BGE_PCI_MEMWIN_DATA, val, 4);
312 bge_readreg_ind(struct bge_softc *sc, uin32_t off)
314 device_t dev = sc->bge_dev;
316 pci_write_config(dev, BGE_PCI_REG_BASEADDR, off, 4);
317 return(pci_read_config(dev, BGE_PCI_REG_DATA, 4));
322 bge_writereg_ind(struct bge_softc *sc, uint32_t off, uint32_t val)
324 device_t dev = sc->bge_dev;
326 pci_write_config(dev, BGE_PCI_REG_BASEADDR, off, 4);
327 pci_write_config(dev, BGE_PCI_REG_DATA, val, 4);
332 bge_vpd_readbyte(struct bge_softc *sc, uint32_t addr)
334 device_t dev = sc->bge_dev;
338 pci_write_config(dev, BGE_PCI_VPD_ADDR, addr, 2);
339 for (i = 0; i < BGE_TIMEOUT * 10; i++) {
341 if (pci_read_config(dev, BGE_PCI_VPD_ADDR, 2) & BGE_VPD_FLAG)
345 if (i == BGE_TIMEOUT) {
346 device_printf(sc->bge_dev, "VPD read timed out\n");
350 val = pci_read_config(dev, BGE_PCI_VPD_DATA, 4);
352 return((val >> ((addr % 4) * 8)) & 0xFF);
356 bge_vpd_read_res(struct bge_softc *sc, struct vpd_res *res, uint32_t addr)
361 ptr = (uint8_t *)res;
362 for (i = 0; i < sizeof(struct vpd_res); i++)
363 ptr[i] = bge_vpd_readbyte(sc, i + addr);
369 bge_vpd_read(struct bge_softc *sc)
374 if (sc->bge_vpd_prodname != NULL)
375 kfree(sc->bge_vpd_prodname, M_DEVBUF);
376 if (sc->bge_vpd_readonly != NULL)
377 kfree(sc->bge_vpd_readonly, M_DEVBUF);
378 sc->bge_vpd_prodname = NULL;
379 sc->bge_vpd_readonly = NULL;
381 bge_vpd_read_res(sc, &res, pos);
383 if (res.vr_id != VPD_RES_ID) {
384 device_printf(sc->bge_dev,
385 "bad VPD resource id: expected %x got %x\n",
386 VPD_RES_ID, res.vr_id);
391 sc->bge_vpd_prodname = kmalloc(res.vr_len + 1, M_DEVBUF, M_INTWAIT);
392 for (i = 0; i < res.vr_len; i++)
393 sc->bge_vpd_prodname[i] = bge_vpd_readbyte(sc, i + pos);
394 sc->bge_vpd_prodname[i] = '\0';
397 bge_vpd_read_res(sc, &res, pos);
399 if (res.vr_id != VPD_RES_READ) {
400 device_printf(sc->bge_dev,
401 "bad VPD resource id: expected %x got %x\n",
402 VPD_RES_READ, res.vr_id);
407 sc->bge_vpd_readonly = kmalloc(res.vr_len, M_DEVBUF, M_INTWAIT);
408 for (i = 0; i < res.vr_len + 1; i++)
409 sc->bge_vpd_readonly[i] = bge_vpd_readbyte(sc, i + pos);
414 * Read a byte of data stored in the EEPROM at address 'addr.' The
415 * BCM570x supports both the traditional bitbang interface and an
416 * auto access interface for reading the EEPROM. We use the auto
420 bge_eeprom_getbyte(struct bge_softc *sc, uint32_t addr, uint8_t *dest)
426 * Enable use of auto EEPROM access so we can avoid
427 * having to use the bitbang method.
429 BGE_SETBIT(sc, BGE_MISC_LOCAL_CTL, BGE_MLC_AUTO_EEPROM);
431 /* Reset the EEPROM, load the clock period. */
432 CSR_WRITE_4(sc, BGE_EE_ADDR,
433 BGE_EEADDR_RESET|BGE_EEHALFCLK(BGE_HALFCLK_384SCL));
436 /* Issue the read EEPROM command. */
437 CSR_WRITE_4(sc, BGE_EE_ADDR, BGE_EE_READCMD | addr);
439 /* Wait for completion */
440 for(i = 0; i < BGE_TIMEOUT * 10; i++) {
442 if (CSR_READ_4(sc, BGE_EE_ADDR) & BGE_EEADDR_DONE)
446 if (i == BGE_TIMEOUT) {
447 if_printf(&sc->arpcom.ac_if, "eeprom read timed out\n");
452 byte = CSR_READ_4(sc, BGE_EE_DATA);
454 *dest = (byte >> ((addr % 4) * 8)) & 0xFF;
460 * Read a sequence of bytes from the EEPROM.
463 bge_read_eeprom(struct bge_softc *sc, caddr_t dest, uint32_t off, size_t len)
469 for (byte = 0, err = 0, i = 0; i < len; i++) {
470 err = bge_eeprom_getbyte(sc, off + i, &byte);
480 bge_miibus_readreg(device_t dev, int phy, int reg)
482 struct bge_softc *sc;
484 uint32_t val, autopoll;
487 sc = device_get_softc(dev);
488 ifp = &sc->arpcom.ac_if;
491 * Broadcom's own driver always assumes the internal
492 * PHY is at GMII address 1. On some chips, the PHY responds
493 * to accesses at all addresses, which could cause us to
494 * bogusly attach the PHY 32 times at probe type. Always
495 * restricting the lookup to address 1 is simpler than
496 * trying to figure out which chips revisions should be
502 /* Reading with autopolling on may trigger PCI errors */
503 autopoll = CSR_READ_4(sc, BGE_MI_MODE);
504 if (autopoll & BGE_MIMODE_AUTOPOLL) {
505 BGE_CLRBIT(sc, BGE_MI_MODE, BGE_MIMODE_AUTOPOLL);
509 CSR_WRITE_4(sc, BGE_MI_COMM, BGE_MICMD_READ|BGE_MICOMM_BUSY|
510 BGE_MIPHY(phy)|BGE_MIREG(reg));
512 for (i = 0; i < BGE_TIMEOUT; i++) {
513 val = CSR_READ_4(sc, BGE_MI_COMM);
514 if (!(val & BGE_MICOMM_BUSY))
518 if (i == BGE_TIMEOUT) {
519 if_printf(ifp, "PHY read timed out\n");
524 val = CSR_READ_4(sc, BGE_MI_COMM);
527 if (autopoll & BGE_MIMODE_AUTOPOLL) {
528 BGE_SETBIT(sc, BGE_MI_MODE, BGE_MIMODE_AUTOPOLL);
532 if (val & BGE_MICOMM_READFAIL)
535 return(val & 0xFFFF);
539 bge_miibus_writereg(device_t dev, int phy, int reg, int val)
541 struct bge_softc *sc;
545 sc = device_get_softc(dev);
547 /* Reading with autopolling on may trigger PCI errors */
548 autopoll = CSR_READ_4(sc, BGE_MI_MODE);
549 if (autopoll & BGE_MIMODE_AUTOPOLL) {
550 BGE_CLRBIT(sc, BGE_MI_MODE, BGE_MIMODE_AUTOPOLL);
554 CSR_WRITE_4(sc, BGE_MI_COMM, BGE_MICMD_WRITE|BGE_MICOMM_BUSY|
555 BGE_MIPHY(phy)|BGE_MIREG(reg)|val);
557 for (i = 0; i < BGE_TIMEOUT; i++) {
558 if (!(CSR_READ_4(sc, BGE_MI_COMM) & BGE_MICOMM_BUSY))
562 if (autopoll & BGE_MIMODE_AUTOPOLL) {
563 BGE_SETBIT(sc, BGE_MI_MODE, BGE_MIMODE_AUTOPOLL);
567 if (i == BGE_TIMEOUT) {
568 if_printf(&sc->arpcom.ac_if, "PHY read timed out\n");
576 bge_miibus_statchg(device_t dev)
578 struct bge_softc *sc;
579 struct mii_data *mii;
581 sc = device_get_softc(dev);
582 mii = device_get_softc(sc->bge_miibus);
584 BGE_CLRBIT(sc, BGE_MAC_MODE, BGE_MACMODE_PORTMODE);
585 if (IFM_SUBTYPE(mii->mii_media_active) == IFM_1000_T) {
586 BGE_SETBIT(sc, BGE_MAC_MODE, BGE_PORTMODE_GMII);
588 BGE_SETBIT(sc, BGE_MAC_MODE, BGE_PORTMODE_MII);
591 if ((mii->mii_media_active & IFM_GMASK) == IFM_FDX) {
592 BGE_CLRBIT(sc, BGE_MAC_MODE, BGE_MACMODE_HALF_DUPLEX);
594 BGE_SETBIT(sc, BGE_MAC_MODE, BGE_MACMODE_HALF_DUPLEX);
599 * Handle events that have triggered interrupts.
602 bge_handle_events(struct bge_softc *sc)
607 * Memory management for jumbo frames.
610 bge_alloc_jumbo_mem(struct bge_softc *sc)
612 struct bge_jslot *entry;
616 /* Grab a big chunk o' storage. */
617 sc->bge_cdata.bge_jumbo_buf = contigmalloc(BGE_JMEM, M_DEVBUF,
618 M_WAITOK, 0, 0xffffffff, PAGE_SIZE, 0);
620 if (sc->bge_cdata.bge_jumbo_buf == NULL) {
621 if_printf(&sc->arpcom.ac_if, "no memory for jumbo buffers!\n");
625 SLIST_INIT(&sc->bge_jfree_listhead);
628 * Now divide it up into 9K pieces and save the addresses
629 * in an array. Note that we play an evil trick here by using
630 * the first few bytes in the buffer to hold the the address
631 * of the softc structure for this interface. This is because
632 * bge_jfree() needs it, but it is called by the mbuf management
633 * code which will not pass it to us explicitly.
635 ptr = sc->bge_cdata.bge_jumbo_buf;
636 for (i = 0; i < BGE_JSLOTS; i++) {
637 entry = &sc->bge_cdata.bge_jslots[i];
639 entry->bge_buf = ptr;
640 entry->bge_inuse = 0;
642 SLIST_INSERT_HEAD(&sc->bge_jfree_listhead, entry, jslot_link);
650 bge_free_jumbo_mem(struct bge_softc *sc)
652 if (sc->bge_cdata.bge_jumbo_buf)
653 contigfree(sc->bge_cdata.bge_jumbo_buf, BGE_JMEM, M_DEVBUF);
657 * Allocate a jumbo buffer.
659 static struct bge_jslot *
660 bge_jalloc(struct bge_softc *sc)
662 struct bge_jslot *entry;
664 lwkt_serialize_enter(&sc->bge_jslot_serializer);
665 entry = SLIST_FIRST(&sc->bge_jfree_listhead);
667 SLIST_REMOVE_HEAD(&sc->bge_jfree_listhead, jslot_link);
668 entry->bge_inuse = 1;
670 if_printf(&sc->arpcom.ac_if, "no free jumbo buffers\n");
672 lwkt_serialize_exit(&sc->bge_jslot_serializer);
677 * Adjust usage count on a jumbo buffer.
682 struct bge_jslot *entry = (struct bge_jslot *)arg;
683 struct bge_softc *sc = entry->bge_sc;
686 panic("bge_jref: can't find softc pointer!");
688 if (&sc->bge_cdata.bge_jslots[entry->bge_slot] != entry) {
689 panic("bge_jref: asked to reference buffer "
690 "that we don't manage!");
691 } else if (entry->bge_inuse == 0) {
692 panic("bge_jref: buffer already free!");
694 atomic_add_int(&entry->bge_inuse, 1);
699 * Release a jumbo buffer.
704 struct bge_jslot *entry = (struct bge_jslot *)arg;
705 struct bge_softc *sc = entry->bge_sc;
708 panic("bge_jfree: can't find softc pointer!");
710 if (&sc->bge_cdata.bge_jslots[entry->bge_slot] != entry) {
711 panic("bge_jfree: asked to free buffer that we don't manage!");
712 } else if (entry->bge_inuse == 0) {
713 panic("bge_jfree: buffer already free!");
716 * Possible MP race to 0, use the serializer. The atomic insn
717 * is still needed for races against bge_jref().
719 lwkt_serialize_enter(&sc->bge_jslot_serializer);
720 atomic_subtract_int(&entry->bge_inuse, 1);
721 if (entry->bge_inuse == 0) {
722 SLIST_INSERT_HEAD(&sc->bge_jfree_listhead,
725 lwkt_serialize_exit(&sc->bge_jslot_serializer);
731 * Intialize a standard receive ring descriptor.
734 bge_newbuf_std(struct bge_softc *sc, int i, struct mbuf *m)
736 struct mbuf *m_new = NULL;
740 m_new = m_getcl(MB_DONTWAIT, MT_DATA, M_PKTHDR);
743 m_new->m_len = m_new->m_pkthdr.len = MCLBYTES;
746 m_new->m_len = m_new->m_pkthdr.len = MCLBYTES;
747 m_new->m_data = m_new->m_ext.ext_buf;
750 if (!sc->bge_rx_alignment_bug)
751 m_adj(m_new, ETHER_ALIGN);
752 sc->bge_cdata.bge_rx_std_chain[i] = m_new;
753 r = &sc->bge_rdata->bge_rx_std_ring[i];
754 BGE_HOSTADDR(r->bge_addr, vtophys(mtod(m_new, caddr_t)));
755 r->bge_flags = BGE_RXBDFLAG_END;
756 r->bge_len = m_new->m_len;
763 * Initialize a jumbo receive ring descriptor. This allocates
764 * a jumbo buffer from the pool managed internally by the driver.
767 bge_newbuf_jumbo(struct bge_softc *sc, int i, struct mbuf *m)
769 struct mbuf *m_new = NULL;
773 struct bge_jslot *buf;
775 /* Allocate the mbuf. */
776 MGETHDR(m_new, MB_DONTWAIT, MT_DATA);
780 /* Allocate the jumbo buffer */
781 buf = bge_jalloc(sc);
784 if_printf(&sc->arpcom.ac_if, "jumbo allocation failed "
785 "-- packet dropped!\n");
789 /* Attach the buffer to the mbuf. */
790 m_new->m_ext.ext_arg = buf;
791 m_new->m_ext.ext_buf = buf->bge_buf;
792 m_new->m_ext.ext_free = bge_jfree;
793 m_new->m_ext.ext_ref = bge_jref;
794 m_new->m_ext.ext_size = BGE_JUMBO_FRAMELEN;
796 m_new->m_data = m_new->m_ext.ext_buf;
797 m_new->m_flags |= M_EXT;
798 m_new->m_len = m_new->m_pkthdr.len = m_new->m_ext.ext_size;
801 m_new->m_data = m_new->m_ext.ext_buf;
802 m_new->m_ext.ext_size = BGE_JUMBO_FRAMELEN;
805 if (!sc->bge_rx_alignment_bug)
806 m_adj(m_new, ETHER_ALIGN);
807 /* Set up the descriptor. */
808 r = &sc->bge_rdata->bge_rx_jumbo_ring[i];
809 sc->bge_cdata.bge_rx_jumbo_chain[i] = m_new;
810 BGE_HOSTADDR(r->bge_addr, vtophys(mtod(m_new, caddr_t)));
811 r->bge_flags = BGE_RXBDFLAG_END|BGE_RXBDFLAG_JUMBO_RING;
812 r->bge_len = m_new->m_len;
819 * The standard receive ring has 512 entries in it. At 2K per mbuf cluster,
820 * that's 1MB or memory, which is a lot. For now, we fill only the first
821 * 256 ring entries and hope that our CPU is fast enough to keep up with
825 bge_init_rx_ring_std(struct bge_softc *sc)
829 for (i = 0; i < BGE_SSLOTS; i++) {
830 if (bge_newbuf_std(sc, i, NULL) == ENOBUFS)
835 CSR_WRITE_4(sc, BGE_MBX_RX_STD_PROD_LO, sc->bge_std);
841 bge_free_rx_ring_std(struct bge_softc *sc)
845 for (i = 0; i < BGE_STD_RX_RING_CNT; i++) {
846 if (sc->bge_cdata.bge_rx_std_chain[i] != NULL) {
847 m_freem(sc->bge_cdata.bge_rx_std_chain[i]);
848 sc->bge_cdata.bge_rx_std_chain[i] = NULL;
850 bzero(&sc->bge_rdata->bge_rx_std_ring[i],
851 sizeof(struct bge_rx_bd));
856 bge_init_rx_ring_jumbo(struct bge_softc *sc)
861 for (i = 0; i < BGE_JUMBO_RX_RING_CNT; i++) {
862 if (bge_newbuf_jumbo(sc, i, NULL) == ENOBUFS)
866 sc->bge_jumbo = i - 1;
868 rcb = &sc->bge_rdata->bge_info.bge_jumbo_rx_rcb;
869 rcb->bge_maxlen_flags = BGE_RCB_MAXLEN_FLAGS(0, 0);
870 CSR_WRITE_4(sc, BGE_RX_JUMBO_RCB_MAXLEN_FLAGS, rcb->bge_maxlen_flags);
872 CSR_WRITE_4(sc, BGE_MBX_RX_JUMBO_PROD_LO, sc->bge_jumbo);
878 bge_free_rx_ring_jumbo(struct bge_softc *sc)
882 for (i = 0; i < BGE_JUMBO_RX_RING_CNT; i++) {
883 if (sc->bge_cdata.bge_rx_jumbo_chain[i] != NULL) {
884 m_freem(sc->bge_cdata.bge_rx_jumbo_chain[i]);
885 sc->bge_cdata.bge_rx_jumbo_chain[i] = NULL;
887 bzero(&sc->bge_rdata->bge_rx_jumbo_ring[i],
888 sizeof(struct bge_rx_bd));
893 bge_free_tx_ring(struct bge_softc *sc)
897 if (sc->bge_rdata->bge_tx_ring == NULL)
900 for (i = 0; i < BGE_TX_RING_CNT; i++) {
901 if (sc->bge_cdata.bge_tx_chain[i] != NULL) {
902 m_freem(sc->bge_cdata.bge_tx_chain[i]);
903 sc->bge_cdata.bge_tx_chain[i] = NULL;
905 bzero(&sc->bge_rdata->bge_tx_ring[i],
906 sizeof(struct bge_tx_bd));
911 bge_init_tx_ring(struct bge_softc *sc)
914 sc->bge_tx_saved_considx = 0;
916 CSR_WRITE_4(sc, BGE_MBX_TX_HOST_PROD0_LO, 0);
918 if (sc->bge_chiprev == BGE_CHIPREV_5700_BX)
919 CSR_WRITE_4(sc, BGE_MBX_TX_HOST_PROD0_LO, 0);
921 CSR_WRITE_4(sc, BGE_MBX_TX_NIC_PROD0_LO, 0);
923 if (sc->bge_chiprev == BGE_CHIPREV_5700_BX)
924 CSR_WRITE_4(sc, BGE_MBX_TX_NIC_PROD0_LO, 0);
930 bge_setmulti(struct bge_softc *sc)
933 struct ifmultiaddr *ifma;
934 uint32_t hashes[4] = { 0, 0, 0, 0 };
937 ifp = &sc->arpcom.ac_if;
939 if (ifp->if_flags & IFF_ALLMULTI || ifp->if_flags & IFF_PROMISC) {
940 for (i = 0; i < 4; i++)
941 CSR_WRITE_4(sc, BGE_MAR0 + (i * 4), 0xFFFFFFFF);
945 /* First, zot all the existing filters. */
946 for (i = 0; i < 4; i++)
947 CSR_WRITE_4(sc, BGE_MAR0 + (i * 4), 0);
949 /* Now program new ones. */
950 LIST_FOREACH(ifma, &ifp->if_multiaddrs, ifma_link) {
951 if (ifma->ifma_addr->sa_family != AF_LINK)
954 LLADDR((struct sockaddr_dl *)ifma->ifma_addr),
955 ETHER_ADDR_LEN) & 0x7f;
956 hashes[(h & 0x60) >> 5] |= 1 << (h & 0x1F);
959 for (i = 0; i < 4; i++)
960 CSR_WRITE_4(sc, BGE_MAR0 + (i * 4), hashes[i]);
964 * Do endian, PCI and DMA initialization. Also check the on-board ROM
968 bge_chipinit(struct bge_softc *sc)
973 /* Set endianness before we access any non-PCI registers. */
974 #if BYTE_ORDER == BIG_ENDIAN
975 pci_write_config(sc->bge_dev, BGE_PCI_MISC_CTL,
976 BGE_BIGENDIAN_INIT, 4);
978 pci_write_config(sc->bge_dev, BGE_PCI_MISC_CTL,
979 BGE_LITTLEENDIAN_INIT, 4);
983 * Check the 'ROM failed' bit on the RX CPU to see if
986 if (CSR_READ_4(sc, BGE_RXCPU_MODE) & BGE_RXCPUMODE_ROMFAIL) {
987 if_printf(&sc->arpcom.ac_if,
988 "RX CPU self-diagnostics failed!\n");
992 /* Clear the MAC control register */
993 CSR_WRITE_4(sc, BGE_MAC_MODE, 0);
996 * Clear the MAC statistics block in the NIC's
999 for (i = BGE_STATS_BLOCK;
1000 i < BGE_STATS_BLOCK_END + 1; i += sizeof(uint32_t))
1001 BGE_MEMWIN_WRITE(sc, i, 0);
1003 for (i = BGE_STATUS_BLOCK;
1004 i < BGE_STATUS_BLOCK_END + 1; i += sizeof(uint32_t))
1005 BGE_MEMWIN_WRITE(sc, i, 0);
1007 /* Set up the PCI DMA control register. */
1010 dma_rw_ctl = BGE_PCI_READ_CMD|BGE_PCI_WRITE_CMD |
1011 (0xf << BGE_PCIDMARWCTL_RD_WAT_SHIFT) |
1012 (0x2 << BGE_PCIDMARWCTL_WR_WAT_SHIFT);
1013 } else if (pci_read_config(sc->bge_dev, BGE_PCI_PCISTATE, 4) &
1014 BGE_PCISTATE_PCI_BUSMODE) {
1015 /* Conventional PCI bus */
1016 dma_rw_ctl = BGE_PCI_READ_CMD|BGE_PCI_WRITE_CMD |
1017 (0x7 << BGE_PCIDMARWCTL_RD_WAT_SHIFT) |
1018 (0x7 << BGE_PCIDMARWCTL_WR_WAT_SHIFT) |
1023 * The 5704 uses a different encoding of read/write
1026 if (sc->bge_asicrev == BGE_ASICREV_BCM5704)
1027 dma_rw_ctl = BGE_PCI_READ_CMD|BGE_PCI_WRITE_CMD |
1028 (0x7 << BGE_PCIDMARWCTL_RD_WAT_SHIFT) |
1029 (0x3 << BGE_PCIDMARWCTL_WR_WAT_SHIFT);
1031 dma_rw_ctl = BGE_PCI_READ_CMD|BGE_PCI_WRITE_CMD |
1032 (0x3 << BGE_PCIDMARWCTL_RD_WAT_SHIFT) |
1033 (0x3 << BGE_PCIDMARWCTL_WR_WAT_SHIFT) |
1037 * 5703 and 5704 need ONEDMA_AT_ONCE as a workaround
1038 * for hardware bugs.
1040 if (sc->bge_asicrev == BGE_ASICREV_BCM5703 ||
1041 sc->bge_asicrev == BGE_ASICREV_BCM5704) {
1044 tmp = CSR_READ_4(sc, BGE_PCI_CLKCTL) & 0x1f;
1045 if (tmp == 0x6 || tmp == 0x7)
1046 dma_rw_ctl |= BGE_PCIDMARWCTL_ONEDMA_ATONCE;
1050 if (sc->bge_asicrev == BGE_ASICREV_BCM5703 ||
1051 sc->bge_asicrev == BGE_ASICREV_BCM5704 ||
1052 sc->bge_asicrev == BGE_ASICREV_BCM5705 ||
1053 sc->bge_asicrev == BGE_ASICREV_BCM5750)
1054 dma_rw_ctl &= ~BGE_PCIDMARWCTL_MINDMA;
1055 pci_write_config(sc->bge_dev, BGE_PCI_DMA_RW_CTL, dma_rw_ctl, 4);
1058 * Set up general mode register.
1060 CSR_WRITE_4(sc, BGE_MODE_CTL, BGE_MODECTL_WORDSWAP_NONFRAME|
1061 BGE_MODECTL_BYTESWAP_DATA|BGE_MODECTL_WORDSWAP_DATA|
1062 BGE_MODECTL_MAC_ATTN_INTR|BGE_MODECTL_HOST_SEND_BDS|
1063 BGE_MODECTL_TX_NO_PHDR_CSUM|BGE_MODECTL_RX_NO_PHDR_CSUM);
1066 * Disable memory write invalidate. Apparently it is not supported
1067 * properly by these devices.
1069 PCI_CLRBIT(sc->bge_dev, BGE_PCI_CMD, PCIM_CMD_MWIEN, 4);
1071 /* Set the timer prescaler (always 66Mhz) */
1072 CSR_WRITE_4(sc, BGE_MISC_CFG, 65 << 1/*BGE_32BITTIME_66MHZ*/);
1078 bge_blockinit(struct bge_softc *sc)
1080 struct bge_rcb *rcb;
1081 volatile struct bge_rcb *vrcb;
1085 * Initialize the memory window pointer register so that
1086 * we can access the first 32K of internal NIC RAM. This will
1087 * allow us to set up the TX send ring RCBs and the RX return
1088 * ring RCBs, plus other things which live in NIC memory.
1090 CSR_WRITE_4(sc, BGE_PCI_MEMWIN_BASEADDR, 0);
1092 /* Note: the BCM5704 has a smaller mbuf space than other chips. */
1094 if (sc->bge_asicrev != BGE_ASICREV_BCM5705 &&
1095 sc->bge_asicrev != BGE_ASICREV_BCM5750) {
1096 /* Configure mbuf memory pool */
1097 if (sc->bge_extram) {
1098 CSR_WRITE_4(sc, BGE_BMAN_MBUFPOOL_BASEADDR,
1100 if (sc->bge_asicrev == BGE_ASICREV_BCM5704)
1101 CSR_WRITE_4(sc, BGE_BMAN_MBUFPOOL_LEN, 0x10000);
1103 CSR_WRITE_4(sc, BGE_BMAN_MBUFPOOL_LEN, 0x18000);
1105 CSR_WRITE_4(sc, BGE_BMAN_MBUFPOOL_BASEADDR,
1107 if (sc->bge_asicrev == BGE_ASICREV_BCM5704)
1108 CSR_WRITE_4(sc, BGE_BMAN_MBUFPOOL_LEN, 0x10000);
1110 CSR_WRITE_4(sc, BGE_BMAN_MBUFPOOL_LEN, 0x18000);
1113 /* Configure DMA resource pool */
1114 CSR_WRITE_4(sc, BGE_BMAN_DMA_DESCPOOL_BASEADDR,
1115 BGE_DMA_DESCRIPTORS);
1116 CSR_WRITE_4(sc, BGE_BMAN_DMA_DESCPOOL_LEN, 0x2000);
1119 /* Configure mbuf pool watermarks */
1120 if (sc->bge_asicrev == BGE_ASICREV_BCM5705 ||
1121 sc->bge_asicrev == BGE_ASICREV_BCM5750) {
1122 CSR_WRITE_4(sc, BGE_BMAN_MBUFPOOL_READDMA_LOWAT, 0x0);
1123 CSR_WRITE_4(sc, BGE_BMAN_MBUFPOOL_MACRX_LOWAT, 0x10);
1125 CSR_WRITE_4(sc, BGE_BMAN_MBUFPOOL_READDMA_LOWAT, 0x50);
1126 CSR_WRITE_4(sc, BGE_BMAN_MBUFPOOL_MACRX_LOWAT, 0x20);
1128 CSR_WRITE_4(sc, BGE_BMAN_MBUFPOOL_HIWAT, 0x60);
1130 /* Configure DMA resource watermarks */
1131 CSR_WRITE_4(sc, BGE_BMAN_DMA_DESCPOOL_LOWAT, 5);
1132 CSR_WRITE_4(sc, BGE_BMAN_DMA_DESCPOOL_HIWAT, 10);
1134 /* Enable buffer manager */
1135 if (sc->bge_asicrev != BGE_ASICREV_BCM5705 &&
1136 sc->bge_asicrev != BGE_ASICREV_BCM5750) {
1137 CSR_WRITE_4(sc, BGE_BMAN_MODE,
1138 BGE_BMANMODE_ENABLE|BGE_BMANMODE_LOMBUF_ATTN);
1140 /* Poll for buffer manager start indication */
1141 for (i = 0; i < BGE_TIMEOUT; i++) {
1142 if (CSR_READ_4(sc, BGE_BMAN_MODE) & BGE_BMANMODE_ENABLE)
1147 if (i == BGE_TIMEOUT) {
1148 if_printf(&sc->arpcom.ac_if,
1149 "buffer manager failed to start\n");
1154 /* Enable flow-through queues */
1155 CSR_WRITE_4(sc, BGE_FTQ_RESET, 0xFFFFFFFF);
1156 CSR_WRITE_4(sc, BGE_FTQ_RESET, 0);
1158 /* Wait until queue initialization is complete */
1159 for (i = 0; i < BGE_TIMEOUT; i++) {
1160 if (CSR_READ_4(sc, BGE_FTQ_RESET) == 0)
1165 if (i == BGE_TIMEOUT) {
1166 if_printf(&sc->arpcom.ac_if,
1167 "flow-through queue init failed\n");
1171 /* Initialize the standard RX ring control block */
1172 rcb = &sc->bge_rdata->bge_info.bge_std_rx_rcb;
1173 BGE_HOSTADDR(rcb->bge_hostaddr,
1174 vtophys(&sc->bge_rdata->bge_rx_std_ring));
1175 if (sc->bge_asicrev == BGE_ASICREV_BCM5705 ||
1176 sc->bge_asicrev == BGE_ASICREV_BCM5750)
1177 rcb->bge_maxlen_flags = BGE_RCB_MAXLEN_FLAGS(512, 0);
1179 rcb->bge_maxlen_flags =
1180 BGE_RCB_MAXLEN_FLAGS(BGE_MAX_FRAMELEN, 0);
1182 rcb->bge_nicaddr = BGE_EXT_STD_RX_RINGS;
1184 rcb->bge_nicaddr = BGE_STD_RX_RINGS;
1185 CSR_WRITE_4(sc, BGE_RX_STD_RCB_HADDR_HI, rcb->bge_hostaddr.bge_addr_hi);
1186 CSR_WRITE_4(sc, BGE_RX_STD_RCB_HADDR_LO, rcb->bge_hostaddr.bge_addr_lo);
1187 CSR_WRITE_4(sc, BGE_RX_STD_RCB_MAXLEN_FLAGS, rcb->bge_maxlen_flags);
1188 CSR_WRITE_4(sc, BGE_RX_STD_RCB_NICADDR, rcb->bge_nicaddr);
1191 * Initialize the jumbo RX ring control block
1192 * We set the 'ring disabled' bit in the flags
1193 * field until we're actually ready to start
1194 * using this ring (i.e. once we set the MTU
1195 * high enough to require it).
1197 if (sc->bge_asicrev != BGE_ASICREV_BCM5705 &&
1198 sc->bge_asicrev != BGE_ASICREV_BCM5750) {
1199 rcb = &sc->bge_rdata->bge_info.bge_jumbo_rx_rcb;
1200 BGE_HOSTADDR(rcb->bge_hostaddr,
1201 vtophys(&sc->bge_rdata->bge_rx_jumbo_ring));
1202 rcb->bge_maxlen_flags =
1203 BGE_RCB_MAXLEN_FLAGS(BGE_MAX_FRAMELEN,
1204 BGE_RCB_FLAG_RING_DISABLED);
1206 rcb->bge_nicaddr = BGE_EXT_JUMBO_RX_RINGS;
1208 rcb->bge_nicaddr = BGE_JUMBO_RX_RINGS;
1209 CSR_WRITE_4(sc, BGE_RX_JUMBO_RCB_HADDR_HI,
1210 rcb->bge_hostaddr.bge_addr_hi);
1211 CSR_WRITE_4(sc, BGE_RX_JUMBO_RCB_HADDR_LO,
1212 rcb->bge_hostaddr.bge_addr_lo);
1213 CSR_WRITE_4(sc, BGE_RX_JUMBO_RCB_MAXLEN_FLAGS,
1214 rcb->bge_maxlen_flags);
1215 CSR_WRITE_4(sc, BGE_RX_JUMBO_RCB_NICADDR, rcb->bge_nicaddr);
1217 /* Set up dummy disabled mini ring RCB */
1218 rcb = &sc->bge_rdata->bge_info.bge_mini_rx_rcb;
1219 rcb->bge_maxlen_flags =
1220 BGE_RCB_MAXLEN_FLAGS(0, BGE_RCB_FLAG_RING_DISABLED);
1221 CSR_WRITE_4(sc, BGE_RX_MINI_RCB_MAXLEN_FLAGS,
1222 rcb->bge_maxlen_flags);
1226 * Set the BD ring replentish thresholds. The recommended
1227 * values are 1/8th the number of descriptors allocated to
1230 CSR_WRITE_4(sc, BGE_RBDI_STD_REPL_THRESH, BGE_STD_RX_RING_CNT/8);
1231 CSR_WRITE_4(sc, BGE_RBDI_JUMBO_REPL_THRESH, BGE_JUMBO_RX_RING_CNT/8);
1234 * Disable all unused send rings by setting the 'ring disabled'
1235 * bit in the flags field of all the TX send ring control blocks.
1236 * These are located in NIC memory.
1238 vrcb = (volatile struct bge_rcb *)(sc->bge_vhandle + BGE_MEMWIN_START +
1240 for (i = 0; i < BGE_TX_RINGS_EXTSSRAM_MAX; i++) {
1241 vrcb->bge_maxlen_flags =
1242 BGE_RCB_MAXLEN_FLAGS(0, BGE_RCB_FLAG_RING_DISABLED);
1243 vrcb->bge_nicaddr = 0;
1247 /* Configure TX RCB 0 (we use only the first ring) */
1248 vrcb = (volatile struct bge_rcb *)(sc->bge_vhandle + BGE_MEMWIN_START +
1250 vrcb->bge_hostaddr.bge_addr_hi = 0;
1251 BGE_HOSTADDR(vrcb->bge_hostaddr, vtophys(&sc->bge_rdata->bge_tx_ring));
1252 vrcb->bge_nicaddr = BGE_NIC_TXRING_ADDR(0, BGE_TX_RING_CNT);
1253 if (sc->bge_asicrev != BGE_ASICREV_BCM5705 &&
1254 sc->bge_asicrev != BGE_ASICREV_BCM5750)
1255 vrcb->bge_maxlen_flags =
1256 BGE_RCB_MAXLEN_FLAGS(BGE_TX_RING_CNT, 0);
1258 /* Disable all unused RX return rings */
1259 vrcb = (volatile struct bge_rcb *)(sc->bge_vhandle + BGE_MEMWIN_START +
1260 BGE_RX_RETURN_RING_RCB);
1261 for (i = 0; i < BGE_RX_RINGS_MAX; i++) {
1262 vrcb->bge_hostaddr.bge_addr_hi = 0;
1263 vrcb->bge_hostaddr.bge_addr_lo = 0;
1264 vrcb->bge_maxlen_flags =
1265 BGE_RCB_MAXLEN_FLAGS(sc->bge_return_ring_cnt,
1266 BGE_RCB_FLAG_RING_DISABLED);
1267 vrcb->bge_nicaddr = 0;
1268 CSR_WRITE_4(sc, BGE_MBX_RX_CONS0_LO +
1269 (i * (sizeof(uint64_t))), 0);
1273 /* Initialize RX ring indexes */
1274 CSR_WRITE_4(sc, BGE_MBX_RX_STD_PROD_LO, 0);
1275 CSR_WRITE_4(sc, BGE_MBX_RX_JUMBO_PROD_LO, 0);
1276 CSR_WRITE_4(sc, BGE_MBX_RX_MINI_PROD_LO, 0);
1279 * Set up RX return ring 0
1280 * Note that the NIC address for RX return rings is 0x00000000.
1281 * The return rings live entirely within the host, so the
1282 * nicaddr field in the RCB isn't used.
1284 vrcb = (volatile struct bge_rcb *)(sc->bge_vhandle + BGE_MEMWIN_START +
1285 BGE_RX_RETURN_RING_RCB);
1286 vrcb->bge_hostaddr.bge_addr_hi = 0;
1287 BGE_HOSTADDR(vrcb->bge_hostaddr,
1288 vtophys(&sc->bge_rdata->bge_rx_return_ring));
1289 vrcb->bge_nicaddr = 0x00000000;
1290 vrcb->bge_maxlen_flags =
1291 BGE_RCB_MAXLEN_FLAGS(sc->bge_return_ring_cnt, 0);
1293 /* Set random backoff seed for TX */
1294 CSR_WRITE_4(sc, BGE_TX_RANDOM_BACKOFF,
1295 sc->arpcom.ac_enaddr[0] + sc->arpcom.ac_enaddr[1] +
1296 sc->arpcom.ac_enaddr[2] + sc->arpcom.ac_enaddr[3] +
1297 sc->arpcom.ac_enaddr[4] + sc->arpcom.ac_enaddr[5] +
1298 BGE_TX_BACKOFF_SEED_MASK);
1300 /* Set inter-packet gap */
1301 CSR_WRITE_4(sc, BGE_TX_LENGTHS, 0x2620);
1304 * Specify which ring to use for packets that don't match
1307 CSR_WRITE_4(sc, BGE_RX_RULES_CFG, 0x08);
1310 * Configure number of RX lists. One interrupt distribution
1311 * list, sixteen active lists, one bad frames class.
1313 CSR_WRITE_4(sc, BGE_RXLP_CFG, 0x181);
1315 /* Inialize RX list placement stats mask. */
1316 CSR_WRITE_4(sc, BGE_RXLP_STATS_ENABLE_MASK, 0x007FFFFF);
1317 CSR_WRITE_4(sc, BGE_RXLP_STATS_CTL, 0x1);
1319 /* Disable host coalescing until we get it set up */
1320 CSR_WRITE_4(sc, BGE_HCC_MODE, 0x00000000);
1322 /* Poll to make sure it's shut down. */
1323 for (i = 0; i < BGE_TIMEOUT; i++) {
1324 if (!(CSR_READ_4(sc, BGE_HCC_MODE) & BGE_HCCMODE_ENABLE))
1329 if (i == BGE_TIMEOUT) {
1330 if_printf(&sc->arpcom.ac_if,
1331 "host coalescing engine failed to idle\n");
1335 /* Set up host coalescing defaults */
1336 CSR_WRITE_4(sc, BGE_HCC_RX_COAL_TICKS, sc->bge_rx_coal_ticks);
1337 CSR_WRITE_4(sc, BGE_HCC_TX_COAL_TICKS, sc->bge_tx_coal_ticks);
1338 CSR_WRITE_4(sc, BGE_HCC_RX_MAX_COAL_BDS, sc->bge_rx_max_coal_bds);
1339 CSR_WRITE_4(sc, BGE_HCC_TX_MAX_COAL_BDS, sc->bge_tx_max_coal_bds);
1340 if (sc->bge_asicrev != BGE_ASICREV_BCM5705 &&
1341 sc->bge_asicrev != BGE_ASICREV_BCM5750) {
1342 CSR_WRITE_4(sc, BGE_HCC_RX_COAL_TICKS_INT, 0);
1343 CSR_WRITE_4(sc, BGE_HCC_TX_COAL_TICKS_INT, 0);
1345 CSR_WRITE_4(sc, BGE_HCC_RX_MAX_COAL_BDS_INT, 0);
1346 CSR_WRITE_4(sc, BGE_HCC_TX_MAX_COAL_BDS_INT, 0);
1348 /* Set up address of statistics block */
1349 if (sc->bge_asicrev != BGE_ASICREV_BCM5705 &&
1350 sc->bge_asicrev != BGE_ASICREV_BCM5750) {
1351 CSR_WRITE_4(sc, BGE_HCC_STATS_ADDR_HI, 0);
1352 CSR_WRITE_4(sc, BGE_HCC_STATS_ADDR_LO,
1353 vtophys(&sc->bge_rdata->bge_info.bge_stats));
1355 CSR_WRITE_4(sc, BGE_HCC_STATS_BASEADDR, BGE_STATS_BLOCK);
1356 CSR_WRITE_4(sc, BGE_HCC_STATUSBLK_BASEADDR, BGE_STATUS_BLOCK);
1357 CSR_WRITE_4(sc, BGE_HCC_STATS_TICKS, sc->bge_stat_ticks);
1360 /* Set up address of status block */
1361 CSR_WRITE_4(sc, BGE_HCC_STATUSBLK_ADDR_HI, 0);
1362 CSR_WRITE_4(sc, BGE_HCC_STATUSBLK_ADDR_LO,
1363 vtophys(&sc->bge_rdata->bge_status_block));
1365 sc->bge_rdata->bge_status_block.bge_idx[0].bge_rx_prod_idx = 0;
1366 sc->bge_rdata->bge_status_block.bge_idx[0].bge_tx_cons_idx = 0;
1368 /* Turn on host coalescing state machine */
1369 CSR_WRITE_4(sc, BGE_HCC_MODE, BGE_HCCMODE_ENABLE);
1371 /* Turn on RX BD completion state machine and enable attentions */
1372 CSR_WRITE_4(sc, BGE_RBDC_MODE,
1373 BGE_RBDCMODE_ENABLE|BGE_RBDCMODE_ATTN);
1375 /* Turn on RX list placement state machine */
1376 CSR_WRITE_4(sc, BGE_RXLP_MODE, BGE_RXLPMODE_ENABLE);
1378 /* Turn on RX list selector state machine. */
1379 if (sc->bge_asicrev != BGE_ASICREV_BCM5705 &&
1380 sc->bge_asicrev != BGE_ASICREV_BCM5750)
1381 CSR_WRITE_4(sc, BGE_RXLS_MODE, BGE_RXLSMODE_ENABLE);
1383 /* Turn on DMA, clear stats */
1384 CSR_WRITE_4(sc, BGE_MAC_MODE, BGE_MACMODE_TXDMA_ENB|
1385 BGE_MACMODE_RXDMA_ENB|BGE_MACMODE_RX_STATS_CLEAR|
1386 BGE_MACMODE_TX_STATS_CLEAR|BGE_MACMODE_RX_STATS_ENB|
1387 BGE_MACMODE_TX_STATS_ENB|BGE_MACMODE_FRMHDR_DMA_ENB|
1388 (sc->bge_tbi ? BGE_PORTMODE_TBI : BGE_PORTMODE_MII));
1390 /* Set misc. local control, enable interrupts on attentions */
1391 CSR_WRITE_4(sc, BGE_MISC_LOCAL_CTL, BGE_MLC_INTR_ONATTN);
1394 /* Assert GPIO pins for PHY reset */
1395 BGE_SETBIT(sc, BGE_MISC_LOCAL_CTL, BGE_MLC_MISCIO_OUT0|
1396 BGE_MLC_MISCIO_OUT1|BGE_MLC_MISCIO_OUT2);
1397 BGE_SETBIT(sc, BGE_MISC_LOCAL_CTL, BGE_MLC_MISCIO_OUTEN0|
1398 BGE_MLC_MISCIO_OUTEN1|BGE_MLC_MISCIO_OUTEN2);
1401 /* Turn on DMA completion state machine */
1402 if (sc->bge_asicrev != BGE_ASICREV_BCM5705 &&
1403 sc->bge_asicrev != BGE_ASICREV_BCM5750)
1404 CSR_WRITE_4(sc, BGE_DMAC_MODE, BGE_DMACMODE_ENABLE);
1406 /* Turn on write DMA state machine */
1407 CSR_WRITE_4(sc, BGE_WDMA_MODE,
1408 BGE_WDMAMODE_ENABLE|BGE_WDMAMODE_ALL_ATTNS);
1410 /* Turn on read DMA state machine */
1411 CSR_WRITE_4(sc, BGE_RDMA_MODE,
1412 BGE_RDMAMODE_ENABLE|BGE_RDMAMODE_ALL_ATTNS);
1414 /* Turn on RX data completion state machine */
1415 CSR_WRITE_4(sc, BGE_RDC_MODE, BGE_RDCMODE_ENABLE);
1417 /* Turn on RX BD initiator state machine */
1418 CSR_WRITE_4(sc, BGE_RBDI_MODE, BGE_RBDIMODE_ENABLE);
1420 /* Turn on RX data and RX BD initiator state machine */
1421 CSR_WRITE_4(sc, BGE_RDBDI_MODE, BGE_RDBDIMODE_ENABLE);
1423 /* Turn on Mbuf cluster free state machine */
1424 if (sc->bge_asicrev != BGE_ASICREV_BCM5705 &&
1425 sc->bge_asicrev != BGE_ASICREV_BCM5750)
1426 CSR_WRITE_4(sc, BGE_MBCF_MODE, BGE_MBCFMODE_ENABLE);
1428 /* Turn on send BD completion state machine */
1429 CSR_WRITE_4(sc, BGE_SBDC_MODE, BGE_SBDCMODE_ENABLE);
1431 /* Turn on send data completion state machine */
1432 CSR_WRITE_4(sc, BGE_SDC_MODE, BGE_SDCMODE_ENABLE);
1434 /* Turn on send data initiator state machine */
1435 CSR_WRITE_4(sc, BGE_SDI_MODE, BGE_SDIMODE_ENABLE);
1437 /* Turn on send BD initiator state machine */
1438 CSR_WRITE_4(sc, BGE_SBDI_MODE, BGE_SBDIMODE_ENABLE);
1440 /* Turn on send BD selector state machine */
1441 CSR_WRITE_4(sc, BGE_SRS_MODE, BGE_SRSMODE_ENABLE);
1443 CSR_WRITE_4(sc, BGE_SDI_STATS_ENABLE_MASK, 0x007FFFFF);
1444 CSR_WRITE_4(sc, BGE_SDI_STATS_CTL,
1445 BGE_SDISTATSCTL_ENABLE|BGE_SDISTATSCTL_FASTER);
1447 /* ack/clear link change events */
1448 CSR_WRITE_4(sc, BGE_MAC_STS, BGE_MACSTAT_SYNC_CHANGED|
1449 BGE_MACSTAT_CFG_CHANGED|BGE_MACSTAT_MI_COMPLETE|
1450 BGE_MACSTAT_LINK_CHANGED);
1452 /* Enable PHY auto polling (for MII/GMII only) */
1454 CSR_WRITE_4(sc, BGE_MI_STS, BGE_MISTS_LINK);
1456 BGE_SETBIT(sc, BGE_MI_MODE, BGE_MIMODE_AUTOPOLL|10<<16);
1457 if (sc->bge_asicrev == BGE_ASICREV_BCM5700)
1458 CSR_WRITE_4(sc, BGE_MAC_EVT_ENB,
1459 BGE_EVTENB_MI_INTERRUPT);
1462 /* Enable link state change attentions. */
1463 BGE_SETBIT(sc, BGE_MAC_EVT_ENB, BGE_EVTENB_LINK_CHANGED);
1469 * Probe for a Broadcom chip. Check the PCI vendor and device IDs
1470 * against our list and return its name if we find a match. Note
1471 * that since the Broadcom controller contains VPD support, we
1472 * can get the device name string from the controller itself instead
1473 * of the compiled-in string. This is a little slow, but it guarantees
1474 * we'll always announce the right product name.
1477 bge_probe(device_t dev)
1479 struct bge_softc *sc;
1482 uint16_t product, vendor;
1484 product = pci_get_device(dev);
1485 vendor = pci_get_vendor(dev);
1487 for (t = bge_devs; t->bge_name != NULL; t++) {
1488 if (vendor == t->bge_vid && product == t->bge_did)
1492 if (t->bge_name == NULL)
1495 sc = device_get_softc(dev);
1500 device_set_desc(dev, sc->bge_vpd_prodname);
1502 descbuf = kmalloc(BGE_DEVDESC_MAX, M_TEMP, M_WAITOK);
1503 ksnprintf(descbuf, BGE_DEVDESC_MAX, "%s, ASIC rev. %#04x", t->bge_name,
1504 pci_read_config(dev, BGE_PCI_MISC_CTL, 4) >> 16);
1505 device_set_desc_copy(dev, descbuf);
1506 if (pci_get_subvendor(dev) == PCI_VENDOR_DELL)
1507 sc->bge_no_3_led = 1;
1508 kfree(descbuf, M_TEMP);
1513 bge_attach(device_t dev)
1516 struct bge_softc *sc;
1518 uint32_t mac_addr = 0;
1520 uint8_t ether_addr[ETHER_ADDR_LEN];
1522 sc = device_get_softc(dev);
1524 callout_init(&sc->bge_stat_timer);
1525 lwkt_serialize_init(&sc->bge_jslot_serializer);
1528 * Map control/status registers.
1530 pci_enable_busmaster(dev);
1533 sc->bge_res = bus_alloc_resource_any(dev, SYS_RES_MEMORY, &rid,
1536 if (sc->bge_res == NULL) {
1537 device_printf(dev, "couldn't map memory\n");
1542 sc->bge_btag = rman_get_bustag(sc->bge_res);
1543 sc->bge_bhandle = rman_get_bushandle(sc->bge_res);
1544 sc->bge_vhandle = (vm_offset_t)rman_get_virtual(sc->bge_res);
1546 /* Allocate interrupt */
1549 sc->bge_irq = bus_alloc_resource_any(dev, SYS_RES_IRQ, &rid,
1550 RF_SHAREABLE | RF_ACTIVE);
1552 if (sc->bge_irq == NULL) {
1553 device_printf(dev, "couldn't map interrupt\n");
1558 /* Save ASIC rev. */
1560 pci_read_config(dev, BGE_PCI_MISC_CTL, 4) &
1561 BGE_PCIMISCCTL_ASICREV;
1562 sc->bge_asicrev = BGE_ASICREV(sc->bge_chipid);
1563 sc->bge_chiprev = BGE_CHIPREV(sc->bge_chipid);
1566 * Treat the 5714 like the 5750 until we have more info
1569 if (sc->bge_asicrev == BGE_ASICREV_BCM5714)
1570 sc->bge_asicrev = BGE_ASICREV_BCM5750;
1573 * XXX: Broadcom Linux driver. Not in specs or eratta.
1576 if (sc->bge_asicrev == BGE_ASICREV_BCM5750) {
1579 v = pci_read_config(dev, BGE_PCI_MSI_CAPID, 4);
1580 if (((v >> 8) & 0xff) == BGE_PCIE_MSI_CAPID) {
1581 v = pci_read_config(dev, BGE_PCIE_MSI_CAPID, 4);
1582 if ((v & 0xff) == BGE_PCIE_MSI_CAPID_VAL)
1587 ifp = &sc->arpcom.ac_if;
1588 if_initname(ifp, device_get_name(dev), device_get_unit(dev));
1590 /* Try to reset the chip. */
1593 if (bge_chipinit(sc)) {
1594 device_printf(dev, "chip initialization failed\n");
1600 * Get station address from the EEPROM.
1602 mac_addr = bge_readmem_ind(sc, 0x0c14);
1603 if ((mac_addr >> 16) == 0x484b) {
1604 ether_addr[0] = (uint8_t)(mac_addr >> 8);
1605 ether_addr[1] = (uint8_t)mac_addr;
1606 mac_addr = bge_readmem_ind(sc, 0x0c18);
1607 ether_addr[2] = (uint8_t)(mac_addr >> 24);
1608 ether_addr[3] = (uint8_t)(mac_addr >> 16);
1609 ether_addr[4] = (uint8_t)(mac_addr >> 8);
1610 ether_addr[5] = (uint8_t)mac_addr;
1611 } else if (bge_read_eeprom(sc, ether_addr,
1612 BGE_EE_MAC_OFFSET + 2, ETHER_ADDR_LEN)) {
1613 device_printf(dev, "failed to read station address\n");
1618 /* Allocate the general information block and ring buffers. */
1619 sc->bge_rdata = contigmalloc(sizeof(struct bge_ring_data), M_DEVBUF,
1620 M_WAITOK, 0, 0xffffffff, PAGE_SIZE, 0);
1622 if (sc->bge_rdata == NULL) {
1624 device_printf(dev, "no memory for list buffers!\n");
1628 bzero(sc->bge_rdata, sizeof(struct bge_ring_data));
1631 * Try to allocate memory for jumbo buffers.
1632 * The 5705/5750 does not appear to support jumbo frames.
1634 if (sc->bge_asicrev != BGE_ASICREV_BCM5705 &&
1635 sc->bge_asicrev != BGE_ASICREV_BCM5750) {
1636 if (bge_alloc_jumbo_mem(sc)) {
1637 device_printf(dev, "jumbo buffer allocation failed\n");
1643 /* Set default tuneable values. */
1644 sc->bge_stat_ticks = BGE_TICKS_PER_SEC;
1645 sc->bge_rx_coal_ticks = 150;
1646 sc->bge_tx_coal_ticks = 150;
1647 sc->bge_rx_max_coal_bds = 64;
1648 sc->bge_tx_max_coal_bds = 128;
1650 /* 5705/5750 limits RX return ring to 512 entries. */
1651 if (sc->bge_asicrev == BGE_ASICREV_BCM5705 ||
1652 sc->bge_asicrev == BGE_ASICREV_BCM5750)
1653 sc->bge_return_ring_cnt = BGE_RETURN_RING_CNT_5705;
1655 sc->bge_return_ring_cnt = BGE_RETURN_RING_CNT;
1657 /* Set up ifnet structure */
1659 ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST;
1660 ifp->if_ioctl = bge_ioctl;
1661 ifp->if_start = bge_start;
1662 ifp->if_watchdog = bge_watchdog;
1663 ifp->if_init = bge_init;
1664 ifp->if_mtu = ETHERMTU;
1665 ifq_set_maxlen(&ifp->if_snd, BGE_TX_RING_CNT - 1);
1666 ifq_set_ready(&ifp->if_snd);
1667 ifp->if_hwassist = BGE_CSUM_FEATURES;
1668 ifp->if_capabilities = IFCAP_HWCSUM;
1669 ifp->if_capenable = ifp->if_capabilities;
1672 * Figure out what sort of media we have by checking the
1673 * hardware config word in the first 32k of NIC internal memory,
1674 * or fall back to examining the EEPROM if necessary.
1675 * Note: on some BCM5700 cards, this value appears to be unset.
1676 * If that's the case, we have to rely on identifying the NIC
1677 * by its PCI subsystem ID, as we do below for the SysKonnect
1680 if (bge_readmem_ind(sc, BGE_SOFTWARE_GENCOMM_SIG) == BGE_MAGIC_NUMBER)
1681 hwcfg = bge_readmem_ind(sc, BGE_SOFTWARE_GENCOMM_NICCFG);
1683 bge_read_eeprom(sc, (caddr_t)&hwcfg,
1684 BGE_EE_HWCFG_OFFSET, sizeof(hwcfg));
1685 hwcfg = ntohl(hwcfg);
1688 if ((hwcfg & BGE_HWCFG_MEDIA) == BGE_MEDIA_FIBER)
1691 /* The SysKonnect SK-9D41 is a 1000baseSX card. */
1692 if (pci_get_subvendor(dev) == PCI_PRODUCT_SCHNEIDERKOCH_SK_9D41)
1696 ifmedia_init(&sc->bge_ifmedia, IFM_IMASK,
1697 bge_ifmedia_upd, bge_ifmedia_sts);
1698 ifmedia_add(&sc->bge_ifmedia, IFM_ETHER|IFM_1000_SX, 0, NULL);
1699 ifmedia_add(&sc->bge_ifmedia,
1700 IFM_ETHER|IFM_1000_SX|IFM_FDX, 0, NULL);
1701 ifmedia_add(&sc->bge_ifmedia, IFM_ETHER|IFM_AUTO, 0, NULL);
1702 ifmedia_set(&sc->bge_ifmedia, IFM_ETHER|IFM_AUTO);
1703 sc->bge_ifmedia.ifm_media = sc->bge_ifmedia.ifm_cur->ifm_media;
1706 * Do transceiver setup.
1708 if (mii_phy_probe(dev, &sc->bge_miibus,
1709 bge_ifmedia_upd, bge_ifmedia_sts)) {
1710 device_printf(dev, "MII without any PHY!\n");
1717 * When using the BCM5701 in PCI-X mode, data corruption has
1718 * been observed in the first few bytes of some received packets.
1719 * Aligning the packet buffer in memory eliminates the corruption.
1720 * Unfortunately, this misaligns the packet payloads. On platforms
1721 * which do not support unaligned accesses, we will realign the
1722 * payloads by copying the received packets.
1724 switch (sc->bge_chipid) {
1725 case BGE_CHIPID_BCM5701_A0:
1726 case BGE_CHIPID_BCM5701_B0:
1727 case BGE_CHIPID_BCM5701_B2:
1728 case BGE_CHIPID_BCM5701_B5:
1729 /* If in PCI-X mode, work around the alignment bug. */
1730 if ((pci_read_config(dev, BGE_PCI_PCISTATE, 4) &
1731 (BGE_PCISTATE_PCI_BUSMODE | BGE_PCISTATE_PCI_BUSSPEED)) ==
1732 BGE_PCISTATE_PCI_BUSSPEED)
1733 sc->bge_rx_alignment_bug = 1;
1738 * Call MI attach routine.
1740 ether_ifattach(ifp, ether_addr, NULL);
1742 error = bus_setup_intr(dev, sc->bge_irq, INTR_NETSAFE,
1743 bge_intr, sc, &sc->bge_intrhand,
1744 ifp->if_serializer);
1746 ether_ifdetach(ifp);
1747 device_printf(dev, "couldn't set up irq\n");
1760 bge_detach(device_t dev)
1762 struct bge_softc *sc = device_get_softc(dev);
1763 struct ifnet *ifp = &sc->arpcom.ac_if;
1765 if (device_is_attached(dev)) {
1766 lwkt_serialize_enter(ifp->if_serializer);
1769 bus_teardown_intr(dev, sc->bge_irq, sc->bge_intrhand);
1770 lwkt_serialize_exit(ifp->if_serializer);
1772 ether_ifdetach(ifp);
1775 ifmedia_removeall(&sc->bge_ifmedia);
1777 device_delete_child(dev, sc->bge_miibus);
1778 bus_generic_detach(dev);
1780 bge_release_resources(sc);
1782 if (sc->bge_asicrev != BGE_ASICREV_BCM5705 &&
1783 sc->bge_asicrev != BGE_ASICREV_BCM5750)
1784 bge_free_jumbo_mem(sc);
1790 bge_release_resources(struct bge_softc *sc)
1796 if (sc->bge_vpd_prodname != NULL)
1797 kfree(sc->bge_vpd_prodname, M_DEVBUF);
1799 if (sc->bge_vpd_readonly != NULL)
1800 kfree(sc->bge_vpd_readonly, M_DEVBUF);
1802 if (sc->bge_irq != NULL)
1803 bus_release_resource(dev, SYS_RES_IRQ, 0, sc->bge_irq);
1805 if (sc->bge_res != NULL)
1806 bus_release_resource(dev, SYS_RES_MEMORY,
1807 BGE_PCI_BAR0, sc->bge_res);
1809 if (sc->bge_rdata != NULL)
1810 contigfree(sc->bge_rdata, sizeof(struct bge_ring_data),
1817 bge_reset(struct bge_softc *sc)
1820 uint32_t cachesize, command, pcistate, reset;
1825 /* Save some important PCI state. */
1826 cachesize = pci_read_config(dev, BGE_PCI_CACHESZ, 4);
1827 command = pci_read_config(dev, BGE_PCI_CMD, 4);
1828 pcistate = pci_read_config(dev, BGE_PCI_PCISTATE, 4);
1830 pci_write_config(dev, BGE_PCI_MISC_CTL,
1831 BGE_PCIMISCCTL_INDIRECT_ACCESS|BGE_PCIMISCCTL_MASK_PCI_INTR|
1832 BGE_PCIMISCCTL_ENDIAN_WORDSWAP|BGE_PCIMISCCTL_PCISTATE_RW, 4);
1834 reset = BGE_MISCCFG_RESET_CORE_CLOCKS|(65<<1);
1836 /* XXX: Broadcom Linux driver. */
1838 if (CSR_READ_4(sc, 0x7e2c) == 0x60) /* PCIE 1.0 */
1839 CSR_WRITE_4(sc, 0x7e2c, 0x20);
1840 if (sc->bge_chipid != BGE_CHIPID_BCM5750_A0) {
1841 /* Prevent PCIE link training during global reset */
1842 CSR_WRITE_4(sc, BGE_MISC_CFG, (1<<29));
1847 /* Issue global reset */
1848 bge_writereg_ind(sc, BGE_MISC_CFG, reset);
1852 /* XXX: Broadcom Linux driver. */
1854 if (sc->bge_chipid == BGE_CHIPID_BCM5750_A0) {
1857 DELAY(500000); /* wait for link training to complete */
1858 v = pci_read_config(dev, 0xc4, 4);
1859 pci_write_config(dev, 0xc4, v | (1<<15), 4);
1861 /* Set PCIE max payload size and clear error status. */
1862 pci_write_config(dev, 0xd8, 0xf5000, 4);
1865 /* Reset some of the PCI state that got zapped by reset */
1866 pci_write_config(dev, BGE_PCI_MISC_CTL,
1867 BGE_PCIMISCCTL_INDIRECT_ACCESS|BGE_PCIMISCCTL_MASK_PCI_INTR|
1868 BGE_PCIMISCCTL_ENDIAN_WORDSWAP|BGE_PCIMISCCTL_PCISTATE_RW, 4);
1869 pci_write_config(dev, BGE_PCI_CACHESZ, cachesize, 4);
1870 pci_write_config(dev, BGE_PCI_CMD, command, 4);
1871 bge_writereg_ind(sc, BGE_MISC_CFG, (65 << 1));
1873 /* Enable memory arbiter. */
1874 if (sc->bge_asicrev != BGE_ASICREV_BCM5705)
1875 CSR_WRITE_4(sc, BGE_MARB_MODE, BGE_MARBMODE_ENABLE);
1878 * Prevent PXE restart: write a magic number to the
1879 * general communications memory at 0xB50.
1881 bge_writemem_ind(sc, BGE_SOFTWARE_GENCOMM, BGE_MAGIC_NUMBER);
1883 * Poll the value location we just wrote until
1884 * we see the 1's complement of the magic number.
1885 * This indicates that the firmware initialization
1888 for (i = 0; i < BGE_TIMEOUT; i++) {
1889 val = bge_readmem_ind(sc, BGE_SOFTWARE_GENCOMM);
1890 if (val == ~BGE_MAGIC_NUMBER)
1895 if (i == BGE_TIMEOUT) {
1896 if_printf(&sc->arpcom.ac_if, "firmware handshake timed out\n");
1901 * XXX Wait for the value of the PCISTATE register to
1902 * return to its original pre-reset state. This is a
1903 * fairly good indicator of reset completion. If we don't
1904 * wait for the reset to fully complete, trying to read
1905 * from the device's non-PCI registers may yield garbage
1908 for (i = 0; i < BGE_TIMEOUT; i++) {
1909 if (pci_read_config(dev, BGE_PCI_PCISTATE, 4) == pcistate)
1914 /* Fix up byte swapping */
1915 CSR_WRITE_4(sc, BGE_MODE_CTL, BGE_MODECTL_BYTESWAP_NONFRAME|
1916 BGE_MODECTL_BYTESWAP_DATA);
1918 CSR_WRITE_4(sc, BGE_MAC_MODE, 0);
1921 * The 5704 in TBI mode apparently needs some special
1922 * adjustment to insure the SERDES drive level is set
1925 if (sc->bge_asicrev == BGE_ASICREV_BCM5704 && sc->bge_tbi) {
1928 serdescfg = CSR_READ_4(sc, BGE_SERDES_CFG);
1929 serdescfg = (serdescfg & ~0xFFF) | 0x880;
1930 CSR_WRITE_4(sc, BGE_SERDES_CFG, serdescfg);
1933 /* XXX: Broadcom Linux driver. */
1934 if (sc->bge_pcie && sc->bge_chipid != BGE_CHIPID_BCM5750_A0) {
1937 v = CSR_READ_4(sc, 0x7c00);
1938 CSR_WRITE_4(sc, 0x7c00, v | (1<<25));
1945 * Frame reception handling. This is called if there's a frame
1946 * on the receive return list.
1948 * Note: we have to be able to handle two possibilities here:
1949 * 1) the frame is from the jumbo recieve ring
1950 * 2) the frame is from the standard receive ring
1954 bge_rxeof(struct bge_softc *sc)
1957 int stdcnt = 0, jumbocnt = 0;
1959 ifp = &sc->arpcom.ac_if;
1961 while(sc->bge_rx_saved_considx !=
1962 sc->bge_rdata->bge_status_block.bge_idx[0].bge_rx_prod_idx) {
1963 struct bge_rx_bd *cur_rx;
1965 struct mbuf *m = NULL;
1966 uint16_t vlan_tag = 0;
1970 &sc->bge_rdata->bge_rx_return_ring[sc->bge_rx_saved_considx];
1972 rxidx = cur_rx->bge_idx;
1973 BGE_INC(sc->bge_rx_saved_considx, sc->bge_return_ring_cnt);
1975 if (cur_rx->bge_flags & BGE_RXBDFLAG_VLAN_TAG) {
1977 vlan_tag = cur_rx->bge_vlan_tag;
1980 if (cur_rx->bge_flags & BGE_RXBDFLAG_JUMBO_RING) {
1981 BGE_INC(sc->bge_jumbo, BGE_JUMBO_RX_RING_CNT);
1982 m = sc->bge_cdata.bge_rx_jumbo_chain[rxidx];
1983 sc->bge_cdata.bge_rx_jumbo_chain[rxidx] = NULL;
1985 if (cur_rx->bge_flags & BGE_RXBDFLAG_ERROR) {
1987 bge_newbuf_jumbo(sc, sc->bge_jumbo, m);
1990 if (bge_newbuf_jumbo(sc,
1991 sc->bge_jumbo, NULL) == ENOBUFS) {
1993 bge_newbuf_jumbo(sc, sc->bge_jumbo, m);
1997 BGE_INC(sc->bge_std, BGE_STD_RX_RING_CNT);
1998 m = sc->bge_cdata.bge_rx_std_chain[rxidx];
1999 sc->bge_cdata.bge_rx_std_chain[rxidx] = NULL;
2001 if (cur_rx->bge_flags & BGE_RXBDFLAG_ERROR) {
2003 bge_newbuf_std(sc, sc->bge_std, m);
2006 if (bge_newbuf_std(sc, sc->bge_std,
2009 bge_newbuf_std(sc, sc->bge_std, m);
2017 * The i386 allows unaligned accesses, but for other
2018 * platforms we must make sure the payload is aligned.
2020 if (sc->bge_rx_alignment_bug) {
2021 bcopy(m->m_data, m->m_data + ETHER_ALIGN,
2023 m->m_data += ETHER_ALIGN;
2026 m->m_pkthdr.len = m->m_len = cur_rx->bge_len - ETHER_CRC_LEN;
2027 m->m_pkthdr.rcvif = ifp;
2029 #if 0 /* currently broken for some packets, possibly related to TCP options */
2030 if (ifp->if_hwassist) {
2031 m->m_pkthdr.csum_flags |= CSUM_IP_CHECKED;
2032 if ((cur_rx->bge_ip_csum ^ 0xffff) == 0)
2033 m->m_pkthdr.csum_flags |= CSUM_IP_VALID;
2034 if (cur_rx->bge_flags & BGE_RXBDFLAG_TCP_UDP_CSUM) {
2035 m->m_pkthdr.csum_data =
2036 cur_rx->bge_tcp_udp_csum;
2037 m->m_pkthdr.csum_flags |= CSUM_DATA_VALID;
2043 * If we received a packet with a vlan tag, pass it
2044 * to vlan_input() instead of ether_input().
2047 VLAN_INPUT_TAG(m, vlan_tag);
2048 have_tag = vlan_tag = 0;
2050 ifp->if_input(ifp, m);
2054 CSR_WRITE_4(sc, BGE_MBX_RX_CONS0_LO, sc->bge_rx_saved_considx);
2056 CSR_WRITE_4(sc, BGE_MBX_RX_STD_PROD_LO, sc->bge_std);
2058 CSR_WRITE_4(sc, BGE_MBX_RX_JUMBO_PROD_LO, sc->bge_jumbo);
2062 bge_txeof(struct bge_softc *sc)
2064 struct bge_tx_bd *cur_tx = NULL;
2067 ifp = &sc->arpcom.ac_if;
2070 * Go through our tx ring and free mbufs for those
2071 * frames that have been sent.
2073 while (sc->bge_tx_saved_considx !=
2074 sc->bge_rdata->bge_status_block.bge_idx[0].bge_tx_cons_idx) {
2077 idx = sc->bge_tx_saved_considx;
2078 cur_tx = &sc->bge_rdata->bge_tx_ring[idx];
2079 if (cur_tx->bge_flags & BGE_TXBDFLAG_END)
2081 if (sc->bge_cdata.bge_tx_chain[idx] != NULL) {
2082 m_freem(sc->bge_cdata.bge_tx_chain[idx]);
2083 sc->bge_cdata.bge_tx_chain[idx] = NULL;
2086 BGE_INC(sc->bge_tx_saved_considx, BGE_TX_RING_CNT);
2091 ifp->if_flags &= ~IFF_OACTIVE;
2097 struct bge_softc *sc = xsc;
2098 struct ifnet *ifp = &sc->arpcom.ac_if;
2099 uint32_t status, statusword, mimode;
2102 statusword = loadandclear(&sc->bge_rdata->bge_status_block.bge_status);
2105 /* Avoid this for now -- checking this register is expensive. */
2106 /* Make sure this is really our interrupt. */
2107 if (!(CSR_READ_4(sc, BGE_MISC_LOCAL_CTL) & BGE_MLC_INTR_STATE))
2110 /* Ack interrupt and stop others from occuring. */
2111 CSR_WRITE_4(sc, BGE_MBX_IRQ0_LO, 1);
2114 * Process link state changes.
2115 * Grrr. The link status word in the status block does
2116 * not work correctly on the BCM5700 rev AX and BX chips,
2117 * according to all available information. Hence, we have
2118 * to enable MII interrupts in order to properly obtain
2119 * async link changes. Unfortunately, this also means that
2120 * we have to read the MAC status register to detect link
2121 * changes, thereby adding an additional register access to
2122 * the interrupt handler.
2125 if (sc->bge_asicrev == BGE_ASICREV_BCM5700) {
2126 status = CSR_READ_4(sc, BGE_MAC_STS);
2127 if (status & BGE_MACSTAT_MI_INTERRUPT) {
2129 callout_stop(&sc->bge_stat_timer);
2130 bge_tick_serialized(sc);
2131 /* Clear the interrupt */
2132 CSR_WRITE_4(sc, BGE_MAC_EVT_ENB,
2133 BGE_EVTENB_MI_INTERRUPT);
2134 bge_miibus_readreg(sc->bge_dev, 1, BRGPHY_MII_ISR);
2135 bge_miibus_writereg(sc->bge_dev, 1, BRGPHY_MII_IMR,
2139 if (statusword & BGE_STATFLAG_LINKSTATE_CHANGED) {
2141 * Sometimes PCS encoding errors are detected in
2142 * TBI mode (on fiber NICs), and for some reason
2143 * the chip will signal them as link changes.
2144 * If we get a link change event, but the 'PCS
2145 * encoding error' bit in the MAC status register
2146 * is set, don't bother doing a link check.
2147 * This avoids spurious "gigabit link up" messages
2148 * that sometimes appear on fiber NICs during
2149 * periods of heavy traffic. (There should be no
2150 * effect on copper NICs.)
2152 * If we do have a copper NIC (bge_tbi == 0) then
2153 * check that the AUTOPOLL bit is set before
2154 * processing the event as a real link change.
2155 * Turning AUTOPOLL on and off in the MII read/write
2156 * functions will often trigger a link status
2157 * interrupt for no reason.
2159 status = CSR_READ_4(sc, BGE_MAC_STS);
2160 mimode = CSR_READ_4(sc, BGE_MI_MODE);
2161 if (!(status & (BGE_MACSTAT_PORT_DECODE_ERROR |
2162 BGE_MACSTAT_MI_COMPLETE)) &&
2163 (!sc->bge_tbi && (mimode & BGE_MIMODE_AUTOPOLL))) {
2165 callout_stop(&sc->bge_stat_timer);
2166 bge_tick_serialized(sc);
2169 callout_stop(&sc->bge_stat_timer);
2170 bge_tick_serialized(sc);
2171 /* Clear the interrupt */
2172 CSR_WRITE_4(sc, BGE_MAC_STS, BGE_MACSTAT_SYNC_CHANGED|
2173 BGE_MACSTAT_CFG_CHANGED|BGE_MACSTAT_MI_COMPLETE|
2174 BGE_MACSTAT_LINK_CHANGED);
2176 /* Force flush the status block cached by PCI bridge */
2177 CSR_READ_4(sc, BGE_MBX_IRQ0_LO);
2181 if (ifp->if_flags & IFF_RUNNING) {
2182 /* Check RX return ring producer/consumer */
2185 /* Check TX ring producer/consumer */
2189 bge_handle_events(sc);
2191 /* Re-enable interrupts. */
2192 CSR_WRITE_4(sc, BGE_MBX_IRQ0_LO, 0);
2194 if ((ifp->if_flags & IFF_RUNNING) && !ifq_is_empty(&ifp->if_snd))
2195 (*ifp->if_start)(ifp);
2201 struct bge_softc *sc = xsc;
2202 struct ifnet *ifp = &sc->arpcom.ac_if;
2204 lwkt_serialize_enter(ifp->if_serializer);
2205 bge_tick_serialized(xsc);
2206 lwkt_serialize_exit(ifp->if_serializer);
2210 bge_tick_serialized(void *xsc)
2212 struct bge_softc *sc = xsc;
2213 struct ifnet *ifp = &sc->arpcom.ac_if;
2214 struct mii_data *mii = NULL;
2215 struct ifmedia *ifm = NULL;
2217 if (sc->bge_asicrev == BGE_ASICREV_BCM5705 ||
2218 sc->bge_asicrev == BGE_ASICREV_BCM5750)
2219 bge_stats_update_regs(sc);
2221 bge_stats_update(sc);
2223 callout_reset(&sc->bge_stat_timer, hz, bge_tick, sc);
2230 ifm = &sc->bge_ifmedia;
2231 if (CSR_READ_4(sc, BGE_MAC_STS) &
2232 BGE_MACSTAT_TBI_PCS_SYNCHED) {
2234 if (sc->bge_asicrev == BGE_ASICREV_BCM5704) {
2235 BGE_CLRBIT(sc, BGE_MAC_MODE,
2236 BGE_MACMODE_TBI_SEND_CFGS);
2238 CSR_WRITE_4(sc, BGE_MAC_STS, 0xFFFFFFFF);
2239 if_printf(ifp, "gigabit link up\n");
2240 if (!ifq_is_empty(&ifp->if_snd))
2241 (*ifp->if_start)(ifp);
2246 mii = device_get_softc(sc->bge_miibus);
2249 if (!sc->bge_link) {
2251 if (mii->mii_media_status & IFM_ACTIVE &&
2252 IFM_SUBTYPE(mii->mii_media_active) != IFM_NONE) {
2254 if (IFM_SUBTYPE(mii->mii_media_active) == IFM_1000_T ||
2255 IFM_SUBTYPE(mii->mii_media_active) == IFM_1000_SX)
2256 if_printf(ifp, "gigabit link up\n");
2257 if (!ifq_is_empty(&ifp->if_snd))
2258 (*ifp->if_start)(ifp);
2264 bge_stats_update_regs(struct bge_softc *sc)
2266 struct ifnet *ifp = &sc->arpcom.ac_if;
2267 struct bge_mac_stats_regs stats;
2271 s = (uint32_t *)&stats;
2272 for (i = 0; i < sizeof(struct bge_mac_stats_regs); i += 4) {
2273 *s = CSR_READ_4(sc, BGE_RX_STATS + i);
2277 ifp->if_collisions +=
2278 (stats.dot3StatsSingleCollisionFrames +
2279 stats.dot3StatsMultipleCollisionFrames +
2280 stats.dot3StatsExcessiveCollisions +
2281 stats.dot3StatsLateCollisions) -
2286 bge_stats_update(struct bge_softc *sc)
2288 struct ifnet *ifp = &sc->arpcom.ac_if;
2289 struct bge_stats *stats;
2291 stats = (struct bge_stats *)(sc->bge_vhandle +
2292 BGE_MEMWIN_START + BGE_STATS_BLOCK);
2294 ifp->if_collisions +=
2295 (stats->txstats.dot3StatsSingleCollisionFrames.bge_addr_lo +
2296 stats->txstats.dot3StatsMultipleCollisionFrames.bge_addr_lo +
2297 stats->txstats.dot3StatsExcessiveCollisions.bge_addr_lo +
2298 stats->txstats.dot3StatsLateCollisions.bge_addr_lo) -
2302 ifp->if_collisions +=
2303 (sc->bge_rdata->bge_info.bge_stats.dot3StatsSingleCollisionFrames +
2304 sc->bge_rdata->bge_info.bge_stats.dot3StatsMultipleCollisionFrames +
2305 sc->bge_rdata->bge_info.bge_stats.dot3StatsExcessiveCollisions +
2306 sc->bge_rdata->bge_info.bge_stats.dot3StatsLateCollisions) -
2312 * Encapsulate an mbuf chain in the tx ring by coupling the mbuf data
2313 * pointers to descriptors.
2316 bge_encap(struct bge_softc *sc, struct mbuf *m_head, uint32_t *txidx)
2318 struct bge_tx_bd *f = NULL;
2320 uint32_t frag, cur, cnt = 0;
2321 uint16_t csum_flags = 0;
2322 struct ifvlan *ifv = NULL;
2324 if ((m_head->m_flags & (M_PROTO1|M_PKTHDR)) == (M_PROTO1|M_PKTHDR) &&
2325 m_head->m_pkthdr.rcvif != NULL &&
2326 m_head->m_pkthdr.rcvif->if_type == IFT_L2VLAN)
2327 ifv = m_head->m_pkthdr.rcvif->if_softc;
2330 cur = frag = *txidx;
2332 if (m_head->m_pkthdr.csum_flags) {
2333 if (m_head->m_pkthdr.csum_flags & CSUM_IP)
2334 csum_flags |= BGE_TXBDFLAG_IP_CSUM;
2335 if (m_head->m_pkthdr.csum_flags & (CSUM_TCP | CSUM_UDP))
2336 csum_flags |= BGE_TXBDFLAG_TCP_UDP_CSUM;
2337 if (m_head->m_flags & M_LASTFRAG)
2338 csum_flags |= BGE_TXBDFLAG_IP_FRAG_END;
2339 else if (m_head->m_flags & M_FRAG)
2340 csum_flags |= BGE_TXBDFLAG_IP_FRAG;
2343 * Start packing the mbufs in this chain into
2344 * the fragment pointers. Stop when we run out
2345 * of fragments or hit the end of the mbuf chain.
2347 for (m = m_head; m != NULL; m = m->m_next) {
2348 if (m->m_len != 0) {
2349 f = &sc->bge_rdata->bge_tx_ring[frag];
2350 if (sc->bge_cdata.bge_tx_chain[frag] != NULL)
2352 BGE_HOSTADDR(f->bge_addr,
2353 vtophys(mtod(m, vm_offset_t)));
2354 f->bge_len = m->m_len;
2355 f->bge_flags = csum_flags;
2357 f->bge_flags |= BGE_TXBDFLAG_VLAN_TAG;
2358 f->bge_vlan_tag = ifv->ifv_tag;
2360 f->bge_vlan_tag = 0;
2363 * Sanity check: avoid coming within 16 descriptors
2364 * of the end of the ring.
2366 if ((BGE_TX_RING_CNT - (sc->bge_txcnt + cnt)) < 16)
2369 BGE_INC(frag, BGE_TX_RING_CNT);
2377 if (frag == sc->bge_tx_saved_considx)
2380 sc->bge_rdata->bge_tx_ring[cur].bge_flags |= BGE_TXBDFLAG_END;
2381 sc->bge_cdata.bge_tx_chain[cur] = m_head;
2382 sc->bge_txcnt += cnt;
2390 * Main transmit routine. To avoid having to do mbuf copies, we put pointers
2391 * to the mbuf data regions directly in the transmit descriptors.
2394 bge_start(struct ifnet *ifp)
2396 struct bge_softc *sc;
2397 struct mbuf *m_head = NULL;
2398 uint32_t prodidx = 0;
2406 prodidx = CSR_READ_4(sc, BGE_MBX_TX_HOST_PROD0_LO);
2409 while(sc->bge_cdata.bge_tx_chain[prodidx] == NULL) {
2410 m_head = ifq_poll(&ifp->if_snd);
2416 * safety overkill. If this is a fragmented packet chain
2417 * with delayed TCP/UDP checksums, then only encapsulate
2418 * it if we have enough descriptors to handle the entire
2420 * (paranoia -- may not actually be needed)
2422 if (m_head->m_flags & M_FIRSTFRAG &&
2423 m_head->m_pkthdr.csum_flags & (CSUM_DELAY_DATA)) {
2424 if ((BGE_TX_RING_CNT - sc->bge_txcnt) <
2425 m_head->m_pkthdr.csum_data + 16) {
2426 ifp->if_flags |= IFF_OACTIVE;
2432 * Pack the data into the transmit ring. If we
2433 * don't have room, set the OACTIVE flag and wait
2434 * for the NIC to drain the ring.
2436 if (bge_encap(sc, m_head, &prodidx)) {
2437 ifp->if_flags |= IFF_OACTIVE;
2440 ifq_dequeue(&ifp->if_snd, m_head);
2443 BPF_MTAP(ifp, m_head);
2450 CSR_WRITE_4(sc, BGE_MBX_TX_HOST_PROD0_LO, prodidx);
2451 /* 5700 b2 errata */
2452 if (sc->bge_chiprev == BGE_CHIPREV_5700_BX)
2453 CSR_WRITE_4(sc, BGE_MBX_TX_HOST_PROD0_LO, prodidx);
2456 * Set a timeout in case the chip goes out to lunch.
2464 struct bge_softc *sc = xsc;
2465 struct ifnet *ifp = &sc->arpcom.ac_if;
2468 if (ifp->if_flags & IFF_RUNNING) {
2472 /* Cancel pending I/O and flush buffers. */
2478 * Init the various state machines, ring
2479 * control blocks and firmware.
2481 if (bge_blockinit(sc)) {
2482 if_printf(ifp, "initialization failure\n");
2487 CSR_WRITE_4(sc, BGE_RX_MTU, ifp->if_mtu +
2488 ETHER_HDR_LEN + ETHER_CRC_LEN);
2490 /* Load our MAC address. */
2491 m = (uint16_t *)&sc->arpcom.ac_enaddr[0];
2492 CSR_WRITE_4(sc, BGE_MAC_ADDR1_LO, htons(m[0]));
2493 CSR_WRITE_4(sc, BGE_MAC_ADDR1_HI, (htons(m[1]) << 16) | htons(m[2]));
2495 /* Enable or disable promiscuous mode as needed. */
2496 if (ifp->if_flags & IFF_PROMISC) {
2497 BGE_SETBIT(sc, BGE_RX_MODE, BGE_RXMODE_RX_PROMISC);
2499 BGE_CLRBIT(sc, BGE_RX_MODE, BGE_RXMODE_RX_PROMISC);
2502 /* Program multicast filter. */
2506 bge_init_rx_ring_std(sc);
2509 * Workaround for a bug in 5705 ASIC rev A0. Poll the NIC's
2510 * memory to insure that the chip has in fact read the first
2511 * entry of the ring.
2513 if (sc->bge_chipid == BGE_CHIPID_BCM5705_A0) {
2515 for (i = 0; i < 10; i++) {
2517 v = bge_readmem_ind(sc, BGE_STD_RX_RINGS + 8);
2518 if (v == (MCLBYTES - ETHER_ALIGN))
2522 if_printf(ifp, "5705 A0 chip failed to load RX ring\n");
2525 /* Init jumbo RX ring. */
2526 if (ifp->if_mtu > (ETHERMTU + ETHER_HDR_LEN + ETHER_CRC_LEN))
2527 bge_init_rx_ring_jumbo(sc);
2529 /* Init our RX return ring index */
2530 sc->bge_rx_saved_considx = 0;
2533 bge_init_tx_ring(sc);
2535 /* Turn on transmitter */
2536 BGE_SETBIT(sc, BGE_TX_MODE, BGE_TXMODE_ENABLE);
2538 /* Turn on receiver */
2539 BGE_SETBIT(sc, BGE_RX_MODE, BGE_RXMODE_ENABLE);
2541 /* Tell firmware we're alive. */
2542 BGE_SETBIT(sc, BGE_MODE_CTL, BGE_MODECTL_STACKUP);
2544 /* Enable host interrupts. */
2545 BGE_SETBIT(sc, BGE_PCI_MISC_CTL, BGE_PCIMISCCTL_CLEAR_INTA);
2546 BGE_CLRBIT(sc, BGE_PCI_MISC_CTL, BGE_PCIMISCCTL_MASK_PCI_INTR);
2547 CSR_WRITE_4(sc, BGE_MBX_IRQ0_LO, 0);
2549 bge_ifmedia_upd(ifp);
2551 ifp->if_flags |= IFF_RUNNING;
2552 ifp->if_flags &= ~IFF_OACTIVE;
2554 callout_reset(&sc->bge_stat_timer, hz, bge_tick, sc);
2558 * Set media options.
2561 bge_ifmedia_upd(struct ifnet *ifp)
2563 struct bge_softc *sc = ifp->if_softc;
2564 struct ifmedia *ifm = &sc->bge_ifmedia;
2565 struct mii_data *mii;
2567 /* If this is a 1000baseX NIC, enable the TBI port. */
2569 if (IFM_TYPE(ifm->ifm_media) != IFM_ETHER)
2571 switch(IFM_SUBTYPE(ifm->ifm_media)) {
2574 * The BCM5704 ASIC appears to have a special
2575 * mechanism for programming the autoneg
2576 * advertisement registers in TBI mode.
2578 if (!bge_fake_autoneg &&
2579 sc->bge_asicrev == BGE_ASICREV_BCM5704) {
2582 CSR_WRITE_4(sc, BGE_TX_TBI_AUTONEG, 0);
2583 sgdig = CSR_READ_4(sc, BGE_SGDIG_CFG);
2584 sgdig |= BGE_SGDIGCFG_AUTO |
2585 BGE_SGDIGCFG_PAUSE_CAP |
2586 BGE_SGDIGCFG_ASYM_PAUSE;
2587 CSR_WRITE_4(sc, BGE_SGDIG_CFG,
2588 sgdig | BGE_SGDIGCFG_SEND);
2590 CSR_WRITE_4(sc, BGE_SGDIG_CFG, sgdig);
2594 if ((ifm->ifm_media & IFM_GMASK) == IFM_FDX) {
2595 BGE_CLRBIT(sc, BGE_MAC_MODE,
2596 BGE_MACMODE_HALF_DUPLEX);
2598 BGE_SETBIT(sc, BGE_MAC_MODE,
2599 BGE_MACMODE_HALF_DUPLEX);
2608 mii = device_get_softc(sc->bge_miibus);
2610 if (mii->mii_instance) {
2611 struct mii_softc *miisc;
2612 LIST_FOREACH(miisc, &mii->mii_phys, mii_list)
2613 mii_phy_reset(miisc);
2621 * Report current media status.
2624 bge_ifmedia_sts(struct ifnet *ifp, struct ifmediareq *ifmr)
2626 struct bge_softc *sc = ifp->if_softc;
2627 struct mii_data *mii;
2630 ifmr->ifm_status = IFM_AVALID;
2631 ifmr->ifm_active = IFM_ETHER;
2632 if (CSR_READ_4(sc, BGE_MAC_STS) &
2633 BGE_MACSTAT_TBI_PCS_SYNCHED)
2634 ifmr->ifm_status |= IFM_ACTIVE;
2635 ifmr->ifm_active |= IFM_1000_SX;
2636 if (CSR_READ_4(sc, BGE_MAC_MODE) & BGE_MACMODE_HALF_DUPLEX)
2637 ifmr->ifm_active |= IFM_HDX;
2639 ifmr->ifm_active |= IFM_FDX;
2643 mii = device_get_softc(sc->bge_miibus);
2645 ifmr->ifm_active = mii->mii_media_active;
2646 ifmr->ifm_status = mii->mii_media_status;
2650 bge_ioctl(struct ifnet *ifp, u_long command, caddr_t data, struct ucred *cr)
2652 struct bge_softc *sc = ifp->if_softc;
2653 struct ifreq *ifr = (struct ifreq *) data;
2654 int mask, error = 0;
2655 struct mii_data *mii;
2659 /* Disallow jumbo frames on 5705/5750. */
2660 if (((sc->bge_asicrev == BGE_ASICREV_BCM5705 ||
2661 sc->bge_asicrev == BGE_ASICREV_BCM5750) &&
2662 ifr->ifr_mtu > ETHERMTU) || ifr->ifr_mtu > BGE_JUMBO_MTU)
2665 ifp->if_mtu = ifr->ifr_mtu;
2666 ifp->if_flags &= ~IFF_RUNNING;
2671 if (ifp->if_flags & IFF_UP) {
2673 * If only the state of the PROMISC flag changed,
2674 * then just use the 'set promisc mode' command
2675 * instead of reinitializing the entire NIC. Doing
2676 * a full re-init means reloading the firmware and
2677 * waiting for it to start up, which may take a
2680 if (ifp->if_flags & IFF_RUNNING &&
2681 ifp->if_flags & IFF_PROMISC &&
2682 !(sc->bge_if_flags & IFF_PROMISC)) {
2683 BGE_SETBIT(sc, BGE_RX_MODE,
2684 BGE_RXMODE_RX_PROMISC);
2685 } else if (ifp->if_flags & IFF_RUNNING &&
2686 !(ifp->if_flags & IFF_PROMISC) &&
2687 sc->bge_if_flags & IFF_PROMISC) {
2688 BGE_CLRBIT(sc, BGE_RX_MODE,
2689 BGE_RXMODE_RX_PROMISC);
2693 if (ifp->if_flags & IFF_RUNNING) {
2697 sc->bge_if_flags = ifp->if_flags;
2702 if (ifp->if_flags & IFF_RUNNING) {
2710 error = ifmedia_ioctl(ifp, ifr,
2711 &sc->bge_ifmedia, command);
2713 mii = device_get_softc(sc->bge_miibus);
2714 error = ifmedia_ioctl(ifp, ifr,
2715 &mii->mii_media, command);
2719 mask = ifr->ifr_reqcap ^ ifp->if_capenable;
2720 if (mask & IFCAP_HWCSUM) {
2721 if (IFCAP_HWCSUM & ifp->if_capenable)
2722 ifp->if_capenable &= ~IFCAP_HWCSUM;
2724 ifp->if_capenable |= IFCAP_HWCSUM;
2729 error = ether_ioctl(ifp, command, data);
2736 bge_watchdog(struct ifnet *ifp)
2738 struct bge_softc *sc = ifp->if_softc;
2740 if_printf(ifp, "watchdog timeout -- resetting\n");
2742 ifp->if_flags &= ~IFF_RUNNING;
2747 if (!ifq_is_empty(&ifp->if_snd))
2752 * Stop the adapter and free any mbufs allocated to the
2756 bge_stop(struct bge_softc *sc)
2758 struct ifnet *ifp = &sc->arpcom.ac_if;
2759 struct ifmedia_entry *ifm;
2760 struct mii_data *mii = NULL;
2764 mii = device_get_softc(sc->bge_miibus);
2766 callout_stop(&sc->bge_stat_timer);
2769 * Disable all of the receiver blocks
2771 BGE_CLRBIT(sc, BGE_RX_MODE, BGE_RXMODE_ENABLE);
2772 BGE_CLRBIT(sc, BGE_RBDI_MODE, BGE_RBDIMODE_ENABLE);
2773 BGE_CLRBIT(sc, BGE_RXLP_MODE, BGE_RXLPMODE_ENABLE);
2774 if (sc->bge_asicrev != BGE_ASICREV_BCM5705 &&
2775 sc->bge_asicrev != BGE_ASICREV_BCM5750)
2776 BGE_CLRBIT(sc, BGE_RXLS_MODE, BGE_RXLSMODE_ENABLE);
2777 BGE_CLRBIT(sc, BGE_RDBDI_MODE, BGE_RBDIMODE_ENABLE);
2778 BGE_CLRBIT(sc, BGE_RDC_MODE, BGE_RDCMODE_ENABLE);
2779 BGE_CLRBIT(sc, BGE_RBDC_MODE, BGE_RBDCMODE_ENABLE);
2782 * Disable all of the transmit blocks
2784 BGE_CLRBIT(sc, BGE_SRS_MODE, BGE_SRSMODE_ENABLE);
2785 BGE_CLRBIT(sc, BGE_SBDI_MODE, BGE_SBDIMODE_ENABLE);
2786 BGE_CLRBIT(sc, BGE_SDI_MODE, BGE_SDIMODE_ENABLE);
2787 BGE_CLRBIT(sc, BGE_RDMA_MODE, BGE_RDMAMODE_ENABLE);
2788 BGE_CLRBIT(sc, BGE_SDC_MODE, BGE_SDCMODE_ENABLE);
2789 if (sc->bge_asicrev != BGE_ASICREV_BCM5705 &&
2790 sc->bge_asicrev != BGE_ASICREV_BCM5750)
2791 BGE_CLRBIT(sc, BGE_DMAC_MODE, BGE_DMACMODE_ENABLE);
2792 BGE_CLRBIT(sc, BGE_SBDC_MODE, BGE_SBDCMODE_ENABLE);
2795 * Shut down all of the memory managers and related
2798 BGE_CLRBIT(sc, BGE_HCC_MODE, BGE_HCCMODE_ENABLE);
2799 BGE_CLRBIT(sc, BGE_WDMA_MODE, BGE_WDMAMODE_ENABLE);
2800 if (sc->bge_asicrev != BGE_ASICREV_BCM5705 &&
2801 sc->bge_asicrev != BGE_ASICREV_BCM5750)
2802 BGE_CLRBIT(sc, BGE_MBCF_MODE, BGE_MBCFMODE_ENABLE);
2803 CSR_WRITE_4(sc, BGE_FTQ_RESET, 0xFFFFFFFF);
2804 CSR_WRITE_4(sc, BGE_FTQ_RESET, 0);
2805 if (sc->bge_asicrev != BGE_ASICREV_BCM5705 &&
2806 sc->bge_asicrev != BGE_ASICREV_BCM5750) {
2807 BGE_CLRBIT(sc, BGE_BMAN_MODE, BGE_BMANMODE_ENABLE);
2808 BGE_CLRBIT(sc, BGE_MARB_MODE, BGE_MARBMODE_ENABLE);
2811 /* Disable host interrupts. */
2812 BGE_SETBIT(sc, BGE_PCI_MISC_CTL, BGE_PCIMISCCTL_MASK_PCI_INTR);
2813 CSR_WRITE_4(sc, BGE_MBX_IRQ0_LO, 1);
2816 * Tell firmware we're shutting down.
2818 BGE_CLRBIT(sc, BGE_MODE_CTL, BGE_MODECTL_STACKUP);
2820 /* Free the RX lists. */
2821 bge_free_rx_ring_std(sc);
2823 /* Free jumbo RX list. */
2824 if (sc->bge_asicrev != BGE_ASICREV_BCM5705 &&
2825 sc->bge_asicrev != BGE_ASICREV_BCM5750)
2826 bge_free_rx_ring_jumbo(sc);
2828 /* Free TX buffers. */
2829 bge_free_tx_ring(sc);
2832 * Isolate/power down the PHY, but leave the media selection
2833 * unchanged so that things will be put back to normal when
2834 * we bring the interface back up.
2837 itmp = ifp->if_flags;
2838 ifp->if_flags |= IFF_UP;
2839 ifm = mii->mii_media.ifm_cur;
2840 mtmp = ifm->ifm_media;
2841 ifm->ifm_media = IFM_ETHER|IFM_NONE;
2843 ifm->ifm_media = mtmp;
2844 ifp->if_flags = itmp;
2849 sc->bge_tx_saved_considx = BGE_TXCONS_UNSET;
2851 ifp->if_flags &= ~(IFF_RUNNING | IFF_OACTIVE);
2855 * Stop all chip I/O so that the kernel's probe routines don't
2856 * get confused by errant DMAs when rebooting.
2859 bge_shutdown(device_t dev)
2861 struct bge_softc *sc = device_get_softc(dev);