hammer(8): Fix closing brace indent in 'show' output.
[dragonfly.git] / sys / netinet6 / udp6_usrreq.c
1 /*      $FreeBSD: src/sys/netinet6/udp6_usrreq.c,v 1.6.2.13 2003/01/24 05:11:35 sam Exp $       */
2 /*      $KAME: udp6_usrreq.c,v 1.27 2001/05/21 05:45:10 jinmei Exp $    */
3
4 /*
5  * Copyright (C) 1995, 1996, 1997, and 1998 WIDE Project.
6  * All rights reserved.
7  *
8  * Redistribution and use in source and binary forms, with or without
9  * modification, are permitted provided that the following conditions
10  * are met:
11  * 1. Redistributions of source code must retain the above copyright
12  *    notice, this list of conditions and the following disclaimer.
13  * 2. Redistributions in binary form must reproduce the above copyright
14  *    notice, this list of conditions and the following disclaimer in the
15  *    documentation and/or other materials provided with the distribution.
16  * 3. Neither the name of the project nor the names of its contributors
17  *    may be used to endorse or promote products derived from this software
18  *    without specific prior written permission.
19  *
20  * THIS SOFTWARE IS PROVIDED BY THE PROJECT AND CONTRIBUTORS ``AS IS'' AND
21  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
22  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
23  * ARE DISCLAIMED.  IN NO EVENT SHALL THE PROJECT OR CONTRIBUTORS BE LIABLE
24  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
25  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
26  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
27  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
28  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
29  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
30  * SUCH DAMAGE.
31  */
32
33 /*
34  * Copyright (c) 1982, 1986, 1989, 1993
35  *      The Regents of the University of California.  All rights reserved.
36  *
37  * Redistribution and use in source and binary forms, with or without
38  * modification, are permitted provided that the following conditions
39  * are met:
40  * 1. Redistributions of source code must retain the above copyright
41  *    notice, this list of conditions and the following disclaimer.
42  * 2. Redistributions in binary form must reproduce the above copyright
43  *    notice, this list of conditions and the following disclaimer in the
44  *    documentation and/or other materials provided with the distribution.
45  * 3. Neither the name of the University nor the names of its contributors
46  *    may be used to endorse or promote products derived from this software
47  *    without specific prior written permission.
48  *
49  * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
50  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
51  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
52  * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
53  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
54  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
55  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
56  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
57  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
58  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
59  * SUCH DAMAGE.
60  *
61  *      @(#)udp_var.h   8.1 (Berkeley) 6/10/93
62  */
63
64 #include "opt_inet.h"
65 #include "opt_inet6.h"
66 #include "opt_ipsec.h"
67
68 #include <sys/param.h>
69 #include <sys/kernel.h>
70 #include <sys/mbuf.h>
71 #include <sys/protosw.h>
72 #include <sys/socket.h>
73 #include <sys/socketvar.h>
74 #include <sys/sysctl.h>
75 #include <sys/errno.h>
76 #include <sys/stat.h>
77 #include <sys/systm.h>
78 #include <sys/syslog.h>
79 #include <sys/proc.h>
80 #include <sys/priv.h>
81
82 #include <sys/thread2.h>
83 #include <sys/socketvar2.h>
84 #include <sys/msgport2.h>
85
86 #include <net/if.h>
87 #include <net/route.h>
88 #include <net/if_types.h>
89 #include <net/netisr2.h>
90
91 #include <netinet/in.h>
92 #include <netinet/in_systm.h>
93 #include <netinet/ip.h>
94 #include <netinet/in_pcb.h>
95 #include <netinet/in_var.h>
96 #include <netinet/ip_var.h>
97 #include <netinet/udp.h>
98 #include <netinet/udp_var.h>
99 #include <netinet/ip6.h>
100 #include <netinet6/ip6_var.h>
101 #include <netinet6/in6_pcb.h>
102 #include <netinet/icmp6.h>
103 #include <netinet6/udp6_var.h>
104 #include <netinet6/ip6protosw.h>
105
106 #ifdef IPSEC
107 #include <netinet6/ipsec.h>
108 #include <netinet6/ipsec6.h>
109 #endif /* IPSEC */
110
111 #ifdef FAST_IPSEC
112 #include <netproto/ipsec/ipsec.h>
113 #include <netproto/ipsec/ipsec6.h>
114 #endif /* FAST_IPSEC */
115
116 /*
117  * UDP protocol inplementation.
118  * Per RFC 768, August, 1980.
119  */
120
121 extern  struct protosw inetsw[];
122 static  int in6_mcmatch (struct inpcb *, struct in6_addr *, struct ifnet *);
123
124 static int
125 in6_mcmatch(struct inpcb *in6p, struct in6_addr *ia6, struct ifnet *ifp)
126 {
127         struct ip6_moptions *im6o = in6p->in6p_moptions;
128         struct in6_multi_mship *imm;
129
130         if (im6o == NULL)
131                 return 0;
132
133         for (imm = im6o->im6o_memberships.lh_first; imm != NULL;
134              imm = imm->i6mm_chain.le_next) {
135                 if ((ifp == NULL ||
136                      imm->i6mm_maddr->in6m_ifp == ifp) &&
137                     IN6_ARE_ADDR_EQUAL(&imm->i6mm_maddr->in6m_addr,
138                                        ia6))
139                         return 1;
140         }
141         return 0;
142 }
143
144 int
145 udp6_input(struct mbuf **mp, int *offp, int proto)
146 {
147         struct mbuf *m = *mp;
148         struct ip6_hdr *ip6;
149         struct udphdr *uh;
150         struct inpcb *in6p;
151         struct  mbuf *opts = NULL;
152         int off = *offp;
153         int plen, ulen;
154         struct sockaddr_in6 udp_in6;
155         struct socket *so;
156         struct inpcbinfo *pcbinfo = &udbinfo[0];
157
158         IP6_EXTHDR_CHECK(m, off, sizeof(struct udphdr), IPPROTO_DONE);
159
160         ip6 = mtod(m, struct ip6_hdr *);
161
162         if (faithprefix_p != NULL && (*faithprefix_p)(&ip6->ip6_dst)) {
163                 /* XXX send icmp6 host/port unreach? */
164                 m_freem(m);
165                 return IPPROTO_DONE;
166         }
167
168         udp_stat.udps_ipackets++;
169
170         plen = ntohs(ip6->ip6_plen) - off + sizeof(*ip6);
171         uh = (struct udphdr *)((caddr_t)ip6 + off);
172         ulen = ntohs((u_short)uh->uh_ulen);
173
174         if (plen != ulen) {
175                 udp_stat.udps_badlen++;
176                 goto bad;
177         }
178
179         /*
180          * Checksum extended UDP header and data.
181          */
182         if (uh->uh_sum == 0)
183                 udp_stat.udps_nosum++;
184         else if (in6_cksum(m, IPPROTO_UDP, off, ulen) != 0) {
185                 udp_stat.udps_badsum++;
186                 goto bad;
187         }
188
189         if (IN6_IS_ADDR_MULTICAST(&ip6->ip6_dst)) {
190                 struct  inpcb *last, *marker;
191
192                 /*
193                  * Deliver a multicast datagram to all sockets
194                  * for which the local and remote addresses and ports match
195                  * those of the incoming datagram.  This allows more than
196                  * one process to receive multicasts on the same port.
197                  * (This really ought to be done for unicast datagrams as
198                  * well, but that would cause problems with existing
199                  * applications that open both address-specific sockets and
200                  * a wildcard socket listening to the same port -- they would
201                  * end up receiving duplicates of every unicast datagram.
202                  * Those applications open the multiple sockets to overcome an
203                  * inadequacy of the UDP socket interface, but for backwards
204                  * compatibility we avoid the problem here rather than
205                  * fixing the interface.  Maybe 4.5BSD will remedy this?)
206                  */
207
208                 /*
209                  * In a case that laddr should be set to the link-local
210                  * address (this happens in RIPng), the multicast address
211                  * specified in the received packet does not match with
212                  * laddr. To cure this situation, the matching is relaxed
213                  * if the receiving interface is the same as one specified
214                  * in the socket and if the destination multicast address
215                  * matches one of the multicast groups specified in the socket.
216                  */
217
218                 /*
219                  * Construct sockaddr format source address.
220                  */
221                 init_sin6(&udp_in6, m); /* general init */
222                 udp_in6.sin6_port = uh->uh_sport;
223                 /*
224                  * KAME note: traditionally we dropped udpiphdr from mbuf here.
225                  * We need udphdr for IPsec processing so we do that later.
226                  */
227
228                 /*
229                  * Locate pcb(s) for datagram.
230                  * (Algorithm copied from raw_intr().)
231                  */
232                 last = NULL;
233
234                 marker = in_pcbmarker(mycpuid);
235
236                 GET_PCBINFO_TOKEN(pcbinfo);
237
238                 LIST_INSERT_HEAD(&pcbinfo->pcblisthead, marker, inp_list);
239                 while ((in6p = LIST_NEXT(marker, inp_list)) != NULL) {
240                         LIST_REMOVE(marker, inp_list);
241                         LIST_INSERT_AFTER(in6p, marker, inp_list);
242
243                         if (in6p->inp_flags & INP_PLACEMARKER)
244                                 continue;
245                         if (!(in6p->inp_vflag & INP_IPV6))
246                                 continue;
247                         if (in6p->in6p_lport != uh->uh_dport)
248                                 continue;
249                         if (!IN6_IS_ADDR_UNSPECIFIED(&in6p->in6p_laddr)) {
250                                 if (!IN6_ARE_ADDR_EQUAL(&in6p->in6p_laddr,
251                                                         &ip6->ip6_dst) &&
252                                     !in6_mcmatch(in6p, &ip6->ip6_dst,
253                                                  m->m_pkthdr.rcvif))
254                                         continue;
255                         }
256                         if (!IN6_IS_ADDR_UNSPECIFIED(&in6p->in6p_faddr)) {
257                                 if (!IN6_ARE_ADDR_EQUAL(&in6p->in6p_faddr,
258                                                         &ip6->ip6_src) ||
259                                    in6p->in6p_fport != uh->uh_sport)
260                                         continue;
261                         }
262
263                         if (last != NULL) {
264                                 struct mbuf *n;
265
266 #ifdef IPSEC
267                                 /*
268                                  * Check AH/ESP integrity.
269                                  */
270                                 if (ipsec6_in_reject_so(m, last->inp_socket))
271                                         ipsec6stat.in_polvio++;
272                                         /* do not inject data into pcb */
273                                 else
274 #endif /* IPSEC */
275 #ifdef FAST_IPSEC
276                                 /*
277                                  * Check AH/ESP integrity.
278                                  */
279                                 if (ipsec6_in_reject(m, last))
280                                         ;
281                                 else
282 #endif /* FAST_IPSEC */
283                                 if ((n = m_copy(m, 0, M_COPYALL)) != NULL) {
284                                         /*
285                                          * KAME NOTE: do not
286                                          * m_copy(m, offset, ...) above.
287                                          * ssb_appendaddr() expects M_PKTHDR,
288                                          * and m_copy() will copy M_PKTHDR
289                                          * only if offset is 0.
290                                          */
291                                         so = last->in6p_socket;
292                                         if ((last->in6p_flags & IN6P_CONTROLOPTS) ||
293                                             (so->so_options & SO_TIMESTAMP)) {
294                                                 ip6_savecontrol(last, &opts,
295                                                                 ip6, n);
296                                         }
297                                         m_adj(n, off + sizeof(struct udphdr));
298                                         lwkt_gettoken(&so->so_rcv.ssb_token);
299                                         if (ssb_appendaddr(&so->so_rcv,
300                                                     (struct sockaddr *)&udp_in6,
301                                                     n, opts) == 0) {
302                                                 m_freem(n);
303                                                 if (opts)
304                                                         m_freem(opts);
305                                                 udp_stat.udps_fullsock++;
306                                         } else {
307                                                 sorwakeup(so);
308                                         }
309                                         lwkt_reltoken(&so->so_rcv.ssb_token);
310                                         opts = NULL;
311                                 }
312                         }
313                         last = in6p;
314                         /*
315                          * Don't look for additional matches if this one does
316                          * not have either the SO_REUSEPORT or SO_REUSEADDR
317                          * socket options set.  This heuristic avoids searching
318                          * through all pcbs in the common case of a non-shared
319                          * port.  It assumes that an application will never
320                          * clear these options after setting them.
321                          */
322                         if ((last->in6p_socket->so_options &
323                              (SO_REUSEPORT | SO_REUSEADDR)) == 0)
324                                 break;
325                 }
326                 LIST_REMOVE(marker, inp_list);
327
328                 REL_PCBINFO_TOKEN(pcbinfo);
329
330                 if (last == NULL) {
331                         /*
332                          * No matching pcb found; discard datagram.
333                          * (No need to send an ICMP Port Unreachable
334                          * for a broadcast or multicast datgram.)
335                          */
336                         udp_stat.udps_noport++;
337                         udp_stat.udps_noportmcast++;
338                         goto bad;
339                 }
340 #ifdef IPSEC
341                 /*
342                  * Check AH/ESP integrity.
343                  */
344                 if (ipsec6_in_reject_so(m, last->inp_socket)) {
345                         ipsec6stat.in_polvio++;
346                         goto bad;
347                 }
348 #endif /* IPSEC */
349 #ifdef FAST_IPSEC
350                 /*
351                  * Check AH/ESP integrity.
352                  */
353                 if (ipsec6_in_reject(m, last)) {
354                         goto bad;
355                 }
356 #endif /* FAST_IPSEC */
357                 if (last->in6p_flags & IN6P_CONTROLOPTS
358                     || last->in6p_socket->so_options & SO_TIMESTAMP)
359                         ip6_savecontrol(last, &opts, ip6, m);
360
361                 m_adj(m, off + sizeof(struct udphdr));
362                 so = last->in6p_socket;
363                 lwkt_gettoken(&so->so_rcv.ssb_token);
364                 if (ssb_appendaddr(&so->so_rcv, (struct sockaddr *)&udp_in6,
365                                    m, opts) == 0) {
366                         udp_stat.udps_fullsock++;
367                         lwkt_reltoken(&so->so_rcv.ssb_token);
368                         goto bad;
369                 }
370                 sorwakeup(so);
371                 lwkt_reltoken(&so->so_rcv.ssb_token);
372                 return IPPROTO_DONE;
373         }
374         /*
375          * Locate pcb for datagram.
376          */
377         in6p = in6_pcblookup_hash(pcbinfo, &ip6->ip6_src, uh->uh_sport,
378                                   &ip6->ip6_dst, uh->uh_dport, 1,
379                                   m->m_pkthdr.rcvif);
380         if (in6p == NULL) {
381                 if (log_in_vain) {
382                         char buf[INET6_ADDRSTRLEN];
383
384                         strcpy(buf, ip6_sprintf(&ip6->ip6_dst));
385                         log(LOG_INFO,
386                             "Connection attempt to UDP [%s]:%d from [%s]:%d\n",
387                             buf, ntohs(uh->uh_dport),
388                             ip6_sprintf(&ip6->ip6_src), ntohs(uh->uh_sport));
389                 }
390                 udp_stat.udps_noport++;
391                 if (m->m_flags & M_MCAST) {
392                         kprintf("UDP6: M_MCAST is set in a unicast packet.\n");
393                         udp_stat.udps_noportmcast++;
394                         goto bad;
395                 }
396                 icmp6_error(m, ICMP6_DST_UNREACH, ICMP6_DST_UNREACH_NOPORT, 0);
397                 return IPPROTO_DONE;
398         }
399 #ifdef IPSEC
400         /*
401          * Check AH/ESP integrity.
402          */
403         if (ipsec6_in_reject_so(m, in6p->in6p_socket)) {
404                 ipsec6stat.in_polvio++;
405                 goto bad;
406         }
407 #endif /* IPSEC */
408 #ifdef FAST_IPSEC
409         /*
410          * Check AH/ESP integrity.
411          */
412         if (ipsec6_in_reject(m, in6p)) {
413                 goto bad;
414         }
415 #endif /* FAST_IPSEC */
416
417         /*
418          * Construct sockaddr format source address.
419          * Stuff source address and datagram in user buffer.
420          */
421         init_sin6(&udp_in6, m); /* general init */
422         udp_in6.sin6_port = uh->uh_sport;
423         if (in6p->in6p_flags & IN6P_CONTROLOPTS
424             || in6p->in6p_socket->so_options & SO_TIMESTAMP)
425                 ip6_savecontrol(in6p, &opts, ip6, m);
426         m_adj(m, off + sizeof(struct udphdr));
427         so = in6p->in6p_socket;
428         lwkt_gettoken(&so->so_rcv.ssb_token);
429         if (ssb_appendaddr(&so->so_rcv, (struct sockaddr *)&udp_in6,
430                            m, opts) == 0) {
431                 udp_stat.udps_fullsock++;
432                 lwkt_reltoken(&so->so_rcv.ssb_token);
433                 goto bad;
434         }
435         sorwakeup(so);
436         lwkt_reltoken(&so->so_rcv.ssb_token);
437         return IPPROTO_DONE;
438 bad:
439         if (m)
440                 m_freem(m);
441         if (opts)
442                 m_freem(opts);
443         return IPPROTO_DONE;
444 }
445
446 void
447 udp6_ctlinput(netmsg_t msg)
448 {
449         int cmd = msg->ctlinput.nm_cmd;
450         struct sockaddr *sa = msg->ctlinput.nm_arg;
451         void *d = msg->ctlinput.nm_extra;
452         struct udphdr uh;
453         struct ip6_hdr *ip6;
454         struct mbuf *m;
455         int off = 0;
456         struct ip6ctlparam *ip6cp = NULL;
457         const struct sockaddr_in6 *sa6_src = NULL;
458         inp_notify_t notify = udp_notify;
459         struct udp_portonly {
460                 u_int16_t uh_sport;
461                 u_int16_t uh_dport;
462         } *uhp;
463
464         if (sa->sa_family != AF_INET6 ||
465             sa->sa_len != sizeof(struct sockaddr_in6))
466                 goto out;
467
468         if ((unsigned)cmd >= PRC_NCMDS)
469                 goto out;
470         if (PRC_IS_REDIRECT(cmd))
471                 notify = in6_rtchange, d = NULL;
472         else if (cmd == PRC_HOSTDEAD)
473                 d = NULL;
474         else if (inet6ctlerrmap[cmd] == 0)
475                 goto out;
476
477         /* if the parameter is from icmp6, decode it. */
478         if (d != NULL) {
479                 ip6cp = (struct ip6ctlparam *)d;
480                 m = ip6cp->ip6c_m;
481                 ip6 = ip6cp->ip6c_ip6;
482                 off = ip6cp->ip6c_off;
483                 sa6_src = ip6cp->ip6c_src;
484         } else {
485                 m = NULL;
486                 ip6 = NULL;
487                 sa6_src = &sa6_any;
488         }
489
490         if (ip6) {
491                 /*
492                  * XXX: We assume that when IPV6 is non NULL,
493                  * M and OFF are valid.
494                  */
495
496                 /* check if we can safely examine src and dst ports */
497                 if (m->m_pkthdr.len < off + sizeof(*uhp))
498                         return;
499
500                 bzero(&uh, sizeof(uh));
501                 m_copydata(m, off, sizeof(*uhp), (caddr_t)&uh);
502
503                 in6_pcbnotify(&udbinfo[0], sa, uh.uh_dport,
504                               (struct sockaddr *)ip6cp->ip6c_src, uh.uh_sport,
505                               cmd, 0, notify);
506         } else {
507                 in6_pcbnotify(&udbinfo[0], sa, 0,
508                               (const struct sockaddr *)sa6_src, 0,
509                               cmd, 0, notify);
510         }
511 out:
512         lwkt_replymsg(&msg->ctlinput.base.lmsg, 0);
513 }
514
515 static int
516 udp6_getcred(SYSCTL_HANDLER_ARGS)
517 {
518         struct sockaddr_in6 addrs[2];
519         struct inpcb *inp;
520         int error;
521
522         error = priv_check(req->td, PRIV_ROOT);
523         if (error)
524                 return (error);
525
526         if (req->newlen != sizeof(addrs))
527                 return (EINVAL);
528         if (req->oldlen != sizeof(struct ucred))
529                 return (EINVAL);
530         error = SYSCTL_IN(req, addrs, sizeof(addrs));
531         if (error)
532                 return (error);
533         crit_enter();
534         inp = in6_pcblookup_hash(&udbinfo[0], &addrs[1].sin6_addr,
535                                  addrs[1].sin6_port,
536                                  &addrs[0].sin6_addr, addrs[0].sin6_port,
537                                  1, NULL);
538         if (!inp || !inp->inp_socket) {
539                 error = ENOENT;
540                 goto out;
541         }
542         error = SYSCTL_OUT(req, inp->inp_socket->so_cred,
543                            sizeof(struct ucred));
544
545 out:
546         crit_exit();
547         return (error);
548 }
549
550 SYSCTL_PROC(_net_inet6_udp6, OID_AUTO, getcred, CTLTYPE_OPAQUE|CTLFLAG_RW,
551             0, 0,
552             udp6_getcred, "S,ucred", "Get the ucred of a UDP6 connection");
553
554 /*
555  * NOTE: (so) is referenced from soabort*() and netmsg_pru_abort()
556  *       will sofree() it when we return.
557  */
558 static void
559 udp6_abort(netmsg_t msg)
560 {
561         struct socket *so = msg->abort.base.nm_so;
562         struct inpcb *inp;
563         int error;
564
565         inp = so->so_pcb;
566         if (inp) {
567                 soisdisconnected(so);
568
569                 in6_pcbdetach(inp);
570                 error = 0;
571         } else {
572                 error = EINVAL;
573         }
574         lwkt_replymsg(&msg->abort.base.lmsg, error);
575 }
576
577 static void
578 udp6_attach(netmsg_t msg)
579 {
580         struct socket *so = msg->attach.base.nm_so;
581         struct pru_attach_info *ai = msg->attach.nm_ai;
582         struct inpcb *inp;
583         int error;
584
585         inp = so->so_pcb;
586         if (inp != NULL) {
587                 error = EINVAL;
588                 goto out;
589         }
590
591         if (so->so_snd.ssb_hiwat == 0 || so->so_rcv.ssb_hiwat == 0) {
592                 error = soreserve(so, udp_sendspace, udp_recvspace,
593                     ai->sb_rlimit);
594                 if (error)
595                         goto out;
596         }
597
598         error = in_pcballoc(so, &udbinfo[0]);
599         if (error)
600                 goto out;
601
602         inp = (struct inpcb *)so->so_pcb;
603         inp->inp_vflag |= INP_IPV6;
604         inp->in6p_hops = -1;    /* use kernel default */
605         inp->in6p_cksum = -1;   /* just to be sure */
606         /*
607          * XXX: ugly!!
608          * IPv4 TTL initialization is necessary for an IPv6 socket as well,
609          * because the socket may be bound to an IPv6 wildcard address,
610          * which may match an IPv4-mapped IPv6 address.
611          */
612         inp->inp_ip_ttl = ip_defttl;
613         error = 0;
614 out:
615         lwkt_replymsg(&msg->attach.base.lmsg, error);
616 }
617
618 static void
619 udp6_bind(netmsg_t msg)
620 {
621         struct socket *so =msg->bind.base.nm_so;
622         struct sockaddr *nam = msg->bind.nm_nam;
623         struct thread *td = msg->bind.nm_td;
624         struct sockaddr_in6 *sin6_p = (struct sockaddr_in6 *)nam;
625         struct inpcb *inp;
626         int error;
627
628         inp = so->so_pcb;
629         if (inp == NULL) {
630                 error = EINVAL;
631                 goto out;
632         }
633
634         inp->inp_vflag &= ~INP_IPV4;
635         inp->inp_vflag |= INP_IPV6;
636         if (!(inp->inp_flags & IN6P_IPV6_V6ONLY)) {
637                 if (IN6_IS_ADDR_UNSPECIFIED(&sin6_p->sin6_addr))
638                         inp->inp_vflag |= INP_IPV4;
639                 else if (IN6_IS_ADDR_V4MAPPED(&sin6_p->sin6_addr)) {
640                         struct sockaddr_in sin;
641
642                         in6_sin6_2_sin(&sin, sin6_p);
643                         inp->inp_vflag |= INP_IPV4;
644                         inp->inp_vflag &= ~INP_IPV6;
645                         crit_enter();
646                         error = in_pcbbind(inp, (struct sockaddr *)&sin, td);
647                         crit_exit();
648                         goto out;
649                 }
650         }
651
652         crit_enter();
653         error = in6_pcbbind(inp, nam, td);
654         crit_exit();
655         if (error == 0) {
656                 if (IN6_IS_ADDR_UNSPECIFIED(&sin6_p->sin6_addr))
657                         inp->inp_flags |= INP_WASBOUND_NOTANY;
658                 in_pcbinswildcardhash(inp);
659         }
660 out:
661         lwkt_replymsg(&msg->bind.base.lmsg, error);
662 }
663
664 static void
665 udp6_connect(netmsg_t msg)
666 {
667         struct socket *so = msg->connect.base.nm_so;
668         struct sockaddr *nam = msg->connect.nm_nam;
669         struct thread *td = msg->connect.nm_td;
670         struct inpcb *inp;
671         int error;
672
673         inp = so->so_pcb;
674         if (inp == NULL) {
675                 error = EINVAL;
676                 goto out;
677         }
678
679         if (!(inp->inp_flags & IN6P_IPV6_V6ONLY)) {
680                 struct sockaddr_in6 *sin6_p;
681
682                 sin6_p = (struct sockaddr_in6 *)nam;
683                 if (IN6_IS_ADDR_V4MAPPED(&sin6_p->sin6_addr)) {
684                         struct sockaddr_in sin;
685
686                         if (inp->inp_faddr.s_addr != INADDR_ANY) {
687                                 error = EISCONN;
688                                 goto out;
689                         }
690                         in6_sin6_2_sin(&sin, sin6_p);
691                         crit_enter();
692                         if (inp->inp_flags & INP_WILDCARD)
693                                 in_pcbremwildcardhash(inp);
694                         error = in_pcbconnect(inp, (struct sockaddr *)&sin, td);
695                         crit_exit();
696                         if (error == 0) {
697                                 inp->inp_vflag |= INP_IPV4;
698                                 inp->inp_vflag &= ~INP_IPV6;
699                                 soisconnected(so);
700                         }
701                         goto out;
702                 }
703         }
704         if (!IN6_IS_ADDR_UNSPECIFIED(&inp->in6p_faddr)) {
705                 error = EISCONN;
706                 goto out;
707         }
708         if (inp->inp_flags & INP_WILDCARD)
709                 in_pcbremwildcardhash(inp);
710         if (!prison_remote_ip(td, nam)) {
711                 error = EAFNOSUPPORT; /* IPv4 only jail */
712                 goto out;
713         }
714         crit_enter();
715         error = in6_pcbconnect(inp, nam, td);
716         crit_exit();
717         if (error == 0) {
718                 soisconnected(so);
719         } else if (error == EAFNOSUPPORT) {     /* connection dissolved */
720                 /*
721                  * Follow traditional BSD behavior and retain
722                  * the local port binding.  But, fix the old misbehavior
723                  * of overwriting any previously bound local address.
724                  */
725                 if (!(inp->inp_flags & INP_WASBOUND_NOTANY))
726                         inp->in6p_laddr = kin6addr_any;
727                 in_pcbinswildcardhash(inp);
728         }
729 out:
730         lwkt_replymsg(&msg->connect.base.lmsg, error);
731 }
732
733 static void
734 udp6_detach(netmsg_t msg)
735 {
736         struct socket *so = msg->detach.base.nm_so;
737         struct inpcb *inp;
738         int error;
739
740         inp = so->so_pcb;
741         if (inp) {
742                 in6_pcbdetach(inp);
743                 error = 0;
744         } else {
745                 error = EINVAL;
746         }
747         lwkt_replymsg(&msg->detach.base.lmsg, error);
748 }
749
750 static void
751 udp6_disconnect(netmsg_t msg)
752 {
753         struct socket *so = msg->disconnect.base.nm_so;
754         struct inpcb *inp;
755         int error;
756
757         inp = so->so_pcb;
758         if (inp == NULL) {
759                 error = EINVAL;
760                 goto out;
761         }
762
763         if (inp->inp_vflag & INP_IPV4) {
764                 const struct pr_usrreqs *pru;
765
766                 pru = inetsw[ip_protox[IPPROTO_UDP]].pr_usrreqs;
767                 pru->pru_disconnect(msg);       /* XXX on right port? */
768                 return;
769         }
770
771         if (IN6_IS_ADDR_UNSPECIFIED(&inp->in6p_faddr)) {
772                 error = ENOTCONN;
773         } else {
774                 in6_pcbdisconnect(inp);
775                 soclrstate(so, SS_ISCONNECTED);         /* XXX */
776                 error = 0;
777         }
778 out:
779         lwkt_replymsg(&msg->disconnect.base.lmsg, error);
780 }
781
782 static void
783 udp6_send(netmsg_t msg)
784 {
785         struct socket *so = msg->send.base.nm_so;
786         struct mbuf *m = msg->send.nm_m;
787         struct sockaddr *addr = msg->send.nm_addr;
788         struct mbuf *control = msg->send.nm_control;
789         struct thread *td = msg->send.nm_td;
790         struct inpcb *inp;
791         int error = 0;
792
793         inp = so->so_pcb;
794         if (inp == NULL) {
795                 error = EINVAL;
796                 goto bad;
797         }
798
799         if (addr) {
800                 if (addr->sa_len != sizeof(struct sockaddr_in6)) {
801                         error = EINVAL;
802                         goto bad;
803                 }
804                 if (addr->sa_family != AF_INET6) {
805                         error = EAFNOSUPPORT;
806                         goto bad;
807                 }
808         }
809
810         error = udp6_output(inp, m, addr, control, td);
811         lwkt_replymsg(&msg->send.base.lmsg, error);
812         return;
813 bad:
814         m_freem(m);
815         lwkt_replymsg(&msg->send.base.lmsg, error);
816 }
817
818 struct pr_usrreqs udp6_usrreqs = {
819         .pru_abort = udp6_abort,
820         .pru_accept = pr_generic_notsupp,
821         .pru_attach = udp6_attach,
822         .pru_bind = udp6_bind,
823         .pru_connect = udp6_connect,
824         .pru_connect2 = pr_generic_notsupp,
825         .pru_control = in6_control_dispatch,
826         .pru_detach = udp6_detach,
827         .pru_disconnect = udp6_disconnect,
828         .pru_listen = pr_generic_notsupp,
829         .pru_peeraddr = in6_mapped_peeraddr_dispatch,
830         .pru_rcvd = pr_generic_notsupp,
831         .pru_rcvoob = pr_generic_notsupp,
832         .pru_send = udp6_send,
833         .pru_sense = pru_sense_null,
834         .pru_shutdown = udp_shutdown,
835         .pru_sockaddr = in6_mapped_sockaddr_dispatch,
836         .pru_sosend = sosend,
837         .pru_soreceive = soreceive
838 };
839