Merge branch 'vendor/GCC47'
[dragonfly.git] / contrib / libpcap / pcap.c
1 /*
2  * Copyright (c) 1993, 1994, 1995, 1996, 1997, 1998
3  *      The Regents of the University of California.  All rights reserved.
4  *
5  * Redistribution and use in source and binary forms, with or without
6  * modification, are permitted provided that the following conditions
7  * are met:
8  * 1. Redistributions of source code must retain the above copyright
9  *    notice, this list of conditions and the following disclaimer.
10  * 2. Redistributions in binary form must reproduce the above copyright
11  *    notice, this list of conditions and the following disclaimer in the
12  *    documentation and/or other materials provided with the distribution.
13  * 3. All advertising materials mentioning features or use of this software
14  *    must display the following acknowledgement:
15  *      This product includes software developed by the Computer Systems
16  *      Engineering Group at Lawrence Berkeley Laboratory.
17  * 4. Neither the name of the University nor of the Laboratory may be used
18  *    to endorse or promote products derived from this software without
19  *    specific prior written permission.
20  *
21  * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
22  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
23  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
24  * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
25  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
26  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
27  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
28  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
29  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
30  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
31  * SUCH DAMAGE.
32  */
33
34 #ifndef lint
35 static const char rcsid[] _U_ =
36     "@(#) $Header: /tcpdump/master/libpcap/pcap.c,v 1.128 2008-12-23 20:13:29 guy Exp $ (LBL)";
37 #endif
38
39 #ifdef HAVE_CONFIG_H
40 #include "config.h"
41 #endif
42
43 #ifdef WIN32
44 #include <pcap-stdinc.h>
45 #else /* WIN32 */
46 #if HAVE_INTTYPES_H
47 #include <inttypes.h>
48 #elif HAVE_STDINT_H
49 #include <stdint.h>
50 #endif
51 #ifdef HAVE_SYS_BITYPES_H
52 #include <sys/bitypes.h>
53 #endif
54 #include <sys/types.h>
55 #endif /* WIN32 */
56
57 #include <stdio.h>
58 #include <stdlib.h>
59 #include <string.h>
60 #if !defined(_MSC_VER) && !defined(__BORLANDC__) && !defined(__MINGW32__)
61 #include <unistd.h>
62 #endif
63 #include <fcntl.h>
64 #include <errno.h>
65
66 #ifdef HAVE_OS_PROTO_H
67 #include "os-proto.h"
68 #endif
69
70 #ifdef MSDOS
71 #include "pcap-dos.h"
72 #endif
73
74 #include "pcap-int.h"
75
76 #ifdef HAVE_DAG_API
77 #include <dagnew.h>
78 #include <dagapi.h>
79 #endif
80
81 int 
82 pcap_not_initialized(pcap_t *pcap)
83 {
84         /* this means 'not initialized' */
85         return (PCAP_ERROR_NOT_ACTIVATED);
86 }
87
88 /*
89  * Returns 1 if rfmon mode can be set on the pcap_t, 0 if it can't,
90  * a PCAP_ERROR value on an error.
91  */
92 int
93 pcap_can_set_rfmon(pcap_t *p)
94 {
95         return (p->can_set_rfmon_op(p));
96 }
97
98 /*
99  * For systems where rfmon mode is never supported.
100  */
101 static int
102 pcap_cant_set_rfmon(pcap_t *p _U_)
103 {
104         return (0);
105 }
106
107 /*
108  * Sets *tstamp_typesp to point to an array 1 or more supported time stamp
109  * types; the return value is the number of supported time stamp types.
110  * The list should be freed by a call to pcap_free_tstamp_types() when
111  * you're done with it.
112  *
113  * A return value of 0 means "you don't get a choice of time stamp type",
114  * in which case *tstamp_typesp is set to null.
115  *
116  * PCAP_ERROR is returned on error.
117  */
118 int
119 pcap_list_tstamp_types(pcap_t *p, int **tstamp_typesp)
120 {
121         if (p->tstamp_type_count == 0) {
122                 /*
123                  * We don't support multiple time stamp types.
124                  */
125                 *tstamp_typesp = NULL;
126         } else {
127                 *tstamp_typesp = (int*)calloc(sizeof(**tstamp_typesp),
128                     p->tstamp_type_count);
129                 if (*tstamp_typesp == NULL) {
130                         (void)snprintf(p->errbuf, sizeof(p->errbuf),
131                             "malloc: %s", pcap_strerror(errno));
132                         return (PCAP_ERROR);
133                 }
134                 (void)memcpy(*tstamp_typesp, p->tstamp_type_list,
135                     sizeof(**tstamp_typesp) * p->tstamp_type_count);
136         }
137         return (p->tstamp_type_count);
138 }
139
140 /*
141  * In Windows, you might have a library built with one version of the
142  * C runtime library and an application built with another version of
143  * the C runtime library, which means that the library might use one
144  * version of malloc() and free() and the application might use another
145  * version of malloc() and free().  If so, that means something
146  * allocated by the library cannot be freed by the application, so we
147  * need to have a pcap_free_tstamp_types() routine to free up the list
148  * allocated by pcap_list_tstamp_types(), even though it's just a wrapper
149  * around free().
150  */
151 void
152 pcap_free_tstamp_types(int *tstamp_type_list)
153 {
154         free(tstamp_type_list);
155 }
156
157 /*
158  * Default one-shot callback; overridden for capture types where the
159  * packet data cannot be guaranteed to be available after the callback
160  * returns, so that a copy must be made.
161  */
162 static void
163 pcap_oneshot(u_char *user, const struct pcap_pkthdr *h, const u_char *pkt)
164 {
165         struct oneshot_userdata *sp = (struct oneshot_userdata *)user;
166
167         *sp->hdr = *h;
168         *sp->pkt = pkt;
169 }
170
171 const u_char *
172 pcap_next(pcap_t *p, struct pcap_pkthdr *h)
173 {
174         struct oneshot_userdata s;
175         const u_char *pkt;
176
177         s.hdr = h;
178         s.pkt = &pkt;
179         s.pd = p;
180         if (pcap_dispatch(p, 1, p->oneshot_callback, (u_char *)&s) <= 0)
181                 return (0);
182         return (pkt);
183 }
184
185 int 
186 pcap_next_ex(pcap_t *p, struct pcap_pkthdr **pkt_header,
187     const u_char **pkt_data)
188 {
189         struct oneshot_userdata s;
190
191         s.hdr = &p->pcap_header;
192         s.pkt = pkt_data;
193         s.pd = p;
194
195         /* Saves a pointer to the packet headers */
196         *pkt_header= &p->pcap_header;
197
198         if (p->sf.rfile != NULL) {
199                 int status;
200
201                 /* We are on an offline capture */
202                 status = pcap_offline_read(p, 1, p->oneshot_callback,
203                     (u_char *)&s);
204
205                 /*
206                  * Return codes for pcap_offline_read() are:
207                  *   -  0: EOF
208                  *   - -1: error
209                  *   - >1: OK
210                  * The first one ('0') conflicts with the return code of
211                  * 0 from pcap_read() meaning "no packets arrived before
212                  * the timeout expired", so we map it to -2 so you can
213                  * distinguish between an EOF from a savefile and a
214                  * "no packets arrived before the timeout expired, try
215                  * again" from a live capture.
216                  */
217                 if (status == 0)
218                         return (-2);
219                 else
220                         return (status);
221         }
222
223         /*
224          * Return codes for pcap_read() are:
225          *   -  0: timeout
226          *   - -1: error
227          *   - -2: loop was broken out of with pcap_breakloop()
228          *   - >1: OK
229          * The first one ('0') conflicts with the return code of 0 from
230          * pcap_offline_read() meaning "end of file".
231         */
232         return (p->read_op(p, 1, p->oneshot_callback, (u_char *)&s));
233 }
234
235 static void
236 initialize_ops(pcap_t *p)
237 {
238         /*
239          * Set operation pointers for operations that only work on
240          * an activated pcap_t to point to a routine that returns
241          * a "this isn't activated" error.
242          */
243         p->read_op = (read_op_t)pcap_not_initialized;
244         p->inject_op = (inject_op_t)pcap_not_initialized;
245         p->setfilter_op = (setfilter_op_t)pcap_not_initialized;
246         p->setdirection_op = (setdirection_op_t)pcap_not_initialized;
247         p->set_datalink_op = (set_datalink_op_t)pcap_not_initialized;
248         p->getnonblock_op = (getnonblock_op_t)pcap_not_initialized;
249         p->setnonblock_op = (setnonblock_op_t)pcap_not_initialized;
250         p->stats_op = (stats_op_t)pcap_not_initialized;
251 #ifdef WIN32
252         p->setbuff_op = (setbuff_op_t)pcap_not_initialized;
253         p->setmode_op = (setmode_op_t)pcap_not_initialized;
254         p->setmintocopy_op = (setmintocopy_op_t)pcap_not_initialized;
255 #endif
256
257         /*
258          * Default cleanup operation - implementations can override
259          * this, but should call pcap_cleanup_live_common() after
260          * doing their own additional cleanup.
261          */
262         p->cleanup_op = pcap_cleanup_live_common;
263
264         /*
265          * In most cases, the standard one-short callback can
266          * be used for pcap_next()/pcap_next_ex().
267          */
268         p->oneshot_callback = pcap_oneshot;
269 }
270
271 pcap_t *
272 pcap_create_common(const char *source, char *ebuf)
273 {
274         pcap_t *p;
275
276         p = malloc(sizeof(*p));
277         if (p == NULL) {
278                 snprintf(ebuf, PCAP_ERRBUF_SIZE, "malloc: %s",
279                     pcap_strerror(errno));
280                 return (NULL);
281         }
282         memset(p, 0, sizeof(*p));
283 #ifndef WIN32
284         p->fd = -1;     /* not opened yet */
285         p->selectable_fd = -1;
286         p->send_fd = -1;
287 #endif 
288
289         p->opt.source = strdup(source);
290         if (p->opt.source == NULL) {
291                 snprintf(ebuf, PCAP_ERRBUF_SIZE, "malloc: %s",
292                     pcap_strerror(errno));
293                 free(p);
294                 return (NULL);
295         }
296
297         /*
298          * Default to "can't set rfmon mode"; if it's supported by
299          * a platform, the create routine that called us can set
300          * the op to its routine to check whether a particular
301          * device supports it.
302          */
303         p->can_set_rfmon_op = pcap_cant_set_rfmon;
304
305         initialize_ops(p);
306
307         /* put in some defaults*/
308         pcap_set_timeout(p, 0);
309         pcap_set_snaplen(p, 65535);     /* max packet size */
310         p->opt.promisc = 0;
311         p->opt.buffer_size = 0;
312         p->opt.tstamp_type = -1;        /* default to not setting time stamp type */
313         return (p);
314 }
315
316 int
317 pcap_check_activated(pcap_t *p)
318 {
319         if (p->activated) {
320                 snprintf(p->errbuf, PCAP_ERRBUF_SIZE, "can't perform "
321                         " operation on activated capture");
322                 return (-1);
323         }
324         return (0);
325 }
326
327 int
328 pcap_set_snaplen(pcap_t *p, int snaplen)
329 {
330         if (pcap_check_activated(p))
331                 return (PCAP_ERROR_ACTIVATED);
332         p->snapshot = snaplen;
333         return (0);
334 }
335
336 int
337 pcap_set_promisc(pcap_t *p, int promisc)
338 {
339         if (pcap_check_activated(p))
340                 return (PCAP_ERROR_ACTIVATED);
341         p->opt.promisc = promisc;
342         return (0);
343 }
344
345 int
346 pcap_set_rfmon(pcap_t *p, int rfmon)
347 {
348         if (pcap_check_activated(p))
349                 return (PCAP_ERROR_ACTIVATED);
350         p->opt.rfmon = rfmon;
351         return (0);
352 }
353
354 int
355 pcap_set_timeout(pcap_t *p, int timeout_ms)
356 {
357         if (pcap_check_activated(p))
358                 return (PCAP_ERROR_ACTIVATED);
359         p->md.timeout = timeout_ms;
360         return (0);
361 }
362
363 int
364 pcap_set_tstamp_type(pcap_t *p, int tstamp_type)
365 {
366         int i;
367
368         if (pcap_check_activated(p))
369                 return (PCAP_ERROR_ACTIVATED);
370
371         /*
372          * If p->tstamp_type_count is 0, we don't support setting
373          * the time stamp type at all.
374          */
375         if (p->tstamp_type_count == 0)
376                 return (PCAP_ERROR_CANTSET_TSTAMP_TYPE);
377
378         /*
379          * Check whether we claim to support this type of time stamp.
380          */
381         for (i = 0; i < p->tstamp_type_count; i++) {
382                 if (p->tstamp_type_list[i] == tstamp_type) {
383                         /*
384                          * Yes.
385                          */
386                         p->opt.tstamp_type = tstamp_type;
387                         return (0);
388                 }
389         }
390
391         /*
392          * No.  We support setting the time stamp type, but not to this
393          * particular value.
394          */
395         return (PCAP_WARNING_TSTAMP_TYPE_NOTSUP);
396 }
397
398 int
399 pcap_set_buffer_size(pcap_t *p, int buffer_size)
400 {
401         if (pcap_check_activated(p))
402                 return (PCAP_ERROR_ACTIVATED);
403         p->opt.buffer_size = buffer_size;
404         return (0);
405 }
406
407 int
408 pcap_activate(pcap_t *p)
409 {
410         int status;
411
412         /*
413          * Catch attempts to re-activate an already-activated
414          * pcap_t; this should, for example, catch code that
415          * calls pcap_open_live() followed by pcap_activate(),
416          * as some code that showed up in a Stack Exchange
417          * question did.
418          */
419         if (pcap_check_activated(p))
420                 return (PCAP_ERROR_ACTIVATED);
421         status = p->activate_op(p);
422         if (status >= 0)
423                 p->activated = 1;
424         else {
425                 if (p->errbuf[0] == '\0') {
426                         /*
427                          * No error message supplied by the activate routine;
428                          * for the benefit of programs that don't specially
429                          * handle errors other than PCAP_ERROR, return the
430                          * error message corresponding to the status.
431                          */
432                         snprintf(p->errbuf, PCAP_ERRBUF_SIZE, "%s",
433                             pcap_statustostr(status));
434                 }
435
436                 /*
437                  * Undo any operation pointer setting, etc. done by
438                  * the activate operation.
439                  */
440                 initialize_ops(p);
441         }
442         return (status);
443 }
444
445 pcap_t *
446 pcap_open_live(const char *source, int snaplen, int promisc, int to_ms, char *errbuf)
447 {
448         pcap_t *p;
449         int status;
450
451         p = pcap_create(source, errbuf);
452         if (p == NULL)
453                 return (NULL);
454         status = pcap_set_snaplen(p, snaplen);
455         if (status < 0)
456                 goto fail;
457         status = pcap_set_promisc(p, promisc);
458         if (status < 0)
459                 goto fail;
460         status = pcap_set_timeout(p, to_ms);
461         if (status < 0)
462                 goto fail;
463         /*
464          * Mark this as opened with pcap_open_live(), so that, for
465          * example, we show the full list of DLT_ values, rather
466          * than just the ones that are compatible with capturing
467          * when not in monitor mode.  That allows existing applications
468          * to work the way they used to work, but allows new applications
469          * that know about the new open API to, for example, find out the
470          * DLT_ values that they can select without changing whether
471          * the adapter is in monitor mode or not.
472          */
473         p->oldstyle = 1;
474         status = pcap_activate(p);
475         if (status < 0)
476                 goto fail;
477         return (p);
478 fail:
479         if (status == PCAP_ERROR)
480                 snprintf(errbuf, PCAP_ERRBUF_SIZE, "%s: %s", source,
481                     p->errbuf);
482         else if (status == PCAP_ERROR_NO_SUCH_DEVICE ||
483             status == PCAP_ERROR_PERM_DENIED ||
484             status == PCAP_ERROR_PROMISC_PERM_DENIED)
485                 snprintf(errbuf, PCAP_ERRBUF_SIZE, "%s: %s (%s)", source,
486                     pcap_statustostr(status), p->errbuf);
487         else
488                 snprintf(errbuf, PCAP_ERRBUF_SIZE, "%s: %s", source,
489                     pcap_statustostr(status));
490         pcap_close(p);
491         return (NULL);
492 }
493
494 int
495 pcap_dispatch(pcap_t *p, int cnt, pcap_handler callback, u_char *user)
496 {
497         return (p->read_op(p, cnt, callback, user));
498 }
499
500 /*
501  * XXX - is this necessary?
502  */
503 int
504 pcap_read(pcap_t *p, int cnt, pcap_handler callback, u_char *user)
505 {
506
507         return (p->read_op(p, cnt, callback, user));
508 }
509
510 int
511 pcap_loop(pcap_t *p, int cnt, pcap_handler callback, u_char *user)
512 {
513         register int n;
514
515         for (;;) {
516                 if (p->sf.rfile != NULL) {
517                         /*
518                          * 0 means EOF, so don't loop if we get 0.
519                          */
520                         n = pcap_offline_read(p, cnt, callback, user);
521                 } else {
522                         /*
523                          * XXX keep reading until we get something
524                          * (or an error occurs)
525                          */
526                         do {
527                                 n = p->read_op(p, cnt, callback, user);
528                         } while (n == 0);
529                 }
530                 if (n <= 0)
531                         return (n);
532                 if (cnt > 0) {
533                         cnt -= n;
534                         if (cnt <= 0)
535                                 return (0);
536                 }
537         }
538 }
539
540 /*
541  * Force the loop in "pcap_read()" or "pcap_read_offline()" to terminate.
542  */
543 void
544 pcap_breakloop(pcap_t *p)
545 {
546         p->break_loop = 1;
547 }
548
549 int
550 pcap_datalink(pcap_t *p)
551 {
552         return (p->linktype);
553 }
554
555 int
556 pcap_datalink_ext(pcap_t *p)
557 {
558         return (p->linktype_ext);
559 }
560
561 int
562 pcap_list_datalinks(pcap_t *p, int **dlt_buffer)
563 {
564         if (p->dlt_count == 0) {
565                 /*
566                  * We couldn't fetch the list of DLTs, which means
567                  * this platform doesn't support changing the
568                  * DLT for an interface.  Return a list of DLTs
569                  * containing only the DLT this device supports.
570                  */
571                 *dlt_buffer = (int*)malloc(sizeof(**dlt_buffer));
572                 if (*dlt_buffer == NULL) {
573                         (void)snprintf(p->errbuf, sizeof(p->errbuf),
574                             "malloc: %s", pcap_strerror(errno));
575                         return (-1);
576                 }
577                 **dlt_buffer = p->linktype;
578                 return (1);
579         } else {
580                 *dlt_buffer = (int*)calloc(sizeof(**dlt_buffer), p->dlt_count);
581                 if (*dlt_buffer == NULL) {
582                         (void)snprintf(p->errbuf, sizeof(p->errbuf),
583                             "malloc: %s", pcap_strerror(errno));
584                         return (-1);
585                 }
586                 (void)memcpy(*dlt_buffer, p->dlt_list,
587                     sizeof(**dlt_buffer) * p->dlt_count);
588                 return (p->dlt_count);
589         }
590 }
591
592 /*
593  * In Windows, you might have a library built with one version of the
594  * C runtime library and an application built with another version of
595  * the C runtime library, which means that the library might use one
596  * version of malloc() and free() and the application might use another
597  * version of malloc() and free().  If so, that means something
598  * allocated by the library cannot be freed by the application, so we
599  * need to have a pcap_free_datalinks() routine to free up the list
600  * allocated by pcap_list_datalinks(), even though it's just a wrapper
601  * around free().
602  */
603 void
604 pcap_free_datalinks(int *dlt_list)
605 {
606         free(dlt_list);
607 }
608
609 int
610 pcap_set_datalink(pcap_t *p, int dlt)
611 {
612         int i;
613         const char *dlt_name;
614
615         if (p->dlt_count == 0 || p->set_datalink_op == NULL) {
616                 /*
617                  * We couldn't fetch the list of DLTs, or we don't
618                  * have a "set datalink" operation, which means
619                  * this platform doesn't support changing the
620                  * DLT for an interface.  Check whether the new
621                  * DLT is the one this interface supports.
622                  */
623                 if (p->linktype != dlt)
624                         goto unsupported;
625
626                 /*
627                  * It is, so there's nothing we need to do here.
628                  */
629                 return (0);
630         }
631         for (i = 0; i < p->dlt_count; i++)
632                 if (p->dlt_list[i] == dlt)
633                         break;
634         if (i >= p->dlt_count)
635                 goto unsupported;
636         if (p->dlt_count == 2 && p->dlt_list[0] == DLT_EN10MB &&
637             dlt == DLT_DOCSIS) {
638                 /*
639                  * This is presumably an Ethernet device, as the first
640                  * link-layer type it offers is DLT_EN10MB, and the only
641                  * other type it offers is DLT_DOCSIS.  That means that
642                  * we can't tell the driver to supply DOCSIS link-layer
643                  * headers - we're just pretending that's what we're
644                  * getting, as, presumably, we're capturing on a dedicated
645                  * link to a Cisco Cable Modem Termination System, and
646                  * it's putting raw DOCSIS frames on the wire inside low-level
647                  * Ethernet framing.
648                  */
649                 p->linktype = dlt;
650                 return (0);
651         }
652         if (p->set_datalink_op(p, dlt) == -1)
653                 return (-1);
654         p->linktype = dlt;
655         return (0);
656
657 unsupported:
658         dlt_name = pcap_datalink_val_to_name(dlt);
659         if (dlt_name != NULL) {
660                 (void) snprintf(p->errbuf, sizeof(p->errbuf),
661                     "%s is not one of the DLTs supported by this device",
662                     dlt_name);
663         } else {
664                 (void) snprintf(p->errbuf, sizeof(p->errbuf),
665                     "DLT %d is not one of the DLTs supported by this device",
666                     dlt);
667         }
668         return (-1);
669 }
670
671 /*
672  * This array is designed for mapping upper and lower case letter
673  * together for a case independent comparison.  The mappings are
674  * based upon ascii character sequences.
675  */
676 static const u_char charmap[] = {
677         (u_char)'\000', (u_char)'\001', (u_char)'\002', (u_char)'\003',
678         (u_char)'\004', (u_char)'\005', (u_char)'\006', (u_char)'\007',
679         (u_char)'\010', (u_char)'\011', (u_char)'\012', (u_char)'\013',
680         (u_char)'\014', (u_char)'\015', (u_char)'\016', (u_char)'\017',
681         (u_char)'\020', (u_char)'\021', (u_char)'\022', (u_char)'\023',
682         (u_char)'\024', (u_char)'\025', (u_char)'\026', (u_char)'\027',
683         (u_char)'\030', (u_char)'\031', (u_char)'\032', (u_char)'\033',
684         (u_char)'\034', (u_char)'\035', (u_char)'\036', (u_char)'\037',
685         (u_char)'\040', (u_char)'\041', (u_char)'\042', (u_char)'\043',
686         (u_char)'\044', (u_char)'\045', (u_char)'\046', (u_char)'\047',
687         (u_char)'\050', (u_char)'\051', (u_char)'\052', (u_char)'\053',
688         (u_char)'\054', (u_char)'\055', (u_char)'\056', (u_char)'\057',
689         (u_char)'\060', (u_char)'\061', (u_char)'\062', (u_char)'\063',
690         (u_char)'\064', (u_char)'\065', (u_char)'\066', (u_char)'\067',
691         (u_char)'\070', (u_char)'\071', (u_char)'\072', (u_char)'\073',
692         (u_char)'\074', (u_char)'\075', (u_char)'\076', (u_char)'\077',
693         (u_char)'\100', (u_char)'\141', (u_char)'\142', (u_char)'\143',
694         (u_char)'\144', (u_char)'\145', (u_char)'\146', (u_char)'\147',
695         (u_char)'\150', (u_char)'\151', (u_char)'\152', (u_char)'\153',
696         (u_char)'\154', (u_char)'\155', (u_char)'\156', (u_char)'\157',
697         (u_char)'\160', (u_char)'\161', (u_char)'\162', (u_char)'\163',
698         (u_char)'\164', (u_char)'\165', (u_char)'\166', (u_char)'\167',
699         (u_char)'\170', (u_char)'\171', (u_char)'\172', (u_char)'\133',
700         (u_char)'\134', (u_char)'\135', (u_char)'\136', (u_char)'\137',
701         (u_char)'\140', (u_char)'\141', (u_char)'\142', (u_char)'\143',
702         (u_char)'\144', (u_char)'\145', (u_char)'\146', (u_char)'\147',
703         (u_char)'\150', (u_char)'\151', (u_char)'\152', (u_char)'\153',
704         (u_char)'\154', (u_char)'\155', (u_char)'\156', (u_char)'\157',
705         (u_char)'\160', (u_char)'\161', (u_char)'\162', (u_char)'\163',
706         (u_char)'\164', (u_char)'\165', (u_char)'\166', (u_char)'\167',
707         (u_char)'\170', (u_char)'\171', (u_char)'\172', (u_char)'\173',
708         (u_char)'\174', (u_char)'\175', (u_char)'\176', (u_char)'\177',
709         (u_char)'\200', (u_char)'\201', (u_char)'\202', (u_char)'\203',
710         (u_char)'\204', (u_char)'\205', (u_char)'\206', (u_char)'\207',
711         (u_char)'\210', (u_char)'\211', (u_char)'\212', (u_char)'\213',
712         (u_char)'\214', (u_char)'\215', (u_char)'\216', (u_char)'\217',
713         (u_char)'\220', (u_char)'\221', (u_char)'\222', (u_char)'\223',
714         (u_char)'\224', (u_char)'\225', (u_char)'\226', (u_char)'\227',
715         (u_char)'\230', (u_char)'\231', (u_char)'\232', (u_char)'\233',
716         (u_char)'\234', (u_char)'\235', (u_char)'\236', (u_char)'\237',
717         (u_char)'\240', (u_char)'\241', (u_char)'\242', (u_char)'\243',
718         (u_char)'\244', (u_char)'\245', (u_char)'\246', (u_char)'\247',
719         (u_char)'\250', (u_char)'\251', (u_char)'\252', (u_char)'\253',
720         (u_char)'\254', (u_char)'\255', (u_char)'\256', (u_char)'\257',
721         (u_char)'\260', (u_char)'\261', (u_char)'\262', (u_char)'\263',
722         (u_char)'\264', (u_char)'\265', (u_char)'\266', (u_char)'\267',
723         (u_char)'\270', (u_char)'\271', (u_char)'\272', (u_char)'\273',
724         (u_char)'\274', (u_char)'\275', (u_char)'\276', (u_char)'\277',
725         (u_char)'\300', (u_char)'\341', (u_char)'\342', (u_char)'\343',
726         (u_char)'\344', (u_char)'\345', (u_char)'\346', (u_char)'\347',
727         (u_char)'\350', (u_char)'\351', (u_char)'\352', (u_char)'\353',
728         (u_char)'\354', (u_char)'\355', (u_char)'\356', (u_char)'\357',
729         (u_char)'\360', (u_char)'\361', (u_char)'\362', (u_char)'\363',
730         (u_char)'\364', (u_char)'\365', (u_char)'\366', (u_char)'\367',
731         (u_char)'\370', (u_char)'\371', (u_char)'\372', (u_char)'\333',
732         (u_char)'\334', (u_char)'\335', (u_char)'\336', (u_char)'\337',
733         (u_char)'\340', (u_char)'\341', (u_char)'\342', (u_char)'\343',
734         (u_char)'\344', (u_char)'\345', (u_char)'\346', (u_char)'\347',
735         (u_char)'\350', (u_char)'\351', (u_char)'\352', (u_char)'\353',
736         (u_char)'\354', (u_char)'\355', (u_char)'\356', (u_char)'\357',
737         (u_char)'\360', (u_char)'\361', (u_char)'\362', (u_char)'\363',
738         (u_char)'\364', (u_char)'\365', (u_char)'\366', (u_char)'\367',
739         (u_char)'\370', (u_char)'\371', (u_char)'\372', (u_char)'\373',
740         (u_char)'\374', (u_char)'\375', (u_char)'\376', (u_char)'\377',
741 };
742
743 int
744 pcap_strcasecmp(const char *s1, const char *s2)
745 {
746         register const u_char   *cm = charmap,
747                                 *us1 = (const u_char *)s1,
748                                 *us2 = (const u_char *)s2;
749
750         while (cm[*us1] == cm[*us2++])
751                 if (*us1++ == '\0')
752                         return(0);
753         return (cm[*us1] - cm[*--us2]);
754 }
755
756 struct dlt_choice {
757         const char *name;
758         const char *description;
759         int     dlt;
760 };
761
762 #define DLT_CHOICE(code, description) { #code, description, code }
763 #define DLT_CHOICE_SENTINEL { NULL, NULL, 0 }
764
765 static struct dlt_choice dlt_choices[] = {
766         DLT_CHOICE(DLT_NULL, "BSD loopback"),
767         DLT_CHOICE(DLT_EN10MB, "Ethernet"),
768         DLT_CHOICE(DLT_IEEE802, "Token ring"),
769         DLT_CHOICE(DLT_ARCNET, "BSD ARCNET"),
770         DLT_CHOICE(DLT_SLIP, "SLIP"),
771         DLT_CHOICE(DLT_PPP, "PPP"),
772         DLT_CHOICE(DLT_FDDI, "FDDI"),
773         DLT_CHOICE(DLT_ATM_RFC1483, "RFC 1483 LLC-encapsulated ATM"),
774         DLT_CHOICE(DLT_RAW, "Raw IP"),
775         DLT_CHOICE(DLT_SLIP_BSDOS, "BSD/OS SLIP"),
776         DLT_CHOICE(DLT_PPP_BSDOS, "BSD/OS PPP"),
777         DLT_CHOICE(DLT_ATM_CLIP, "Linux Classical IP-over-ATM"),
778         DLT_CHOICE(DLT_PPP_SERIAL, "PPP over serial"),
779         DLT_CHOICE(DLT_PPP_ETHER, "PPPoE"),
780         DLT_CHOICE(DLT_SYMANTEC_FIREWALL, "Symantec Firewall"),
781         DLT_CHOICE(DLT_C_HDLC, "Cisco HDLC"),
782         DLT_CHOICE(DLT_IEEE802_11, "802.11"),
783         DLT_CHOICE(DLT_FRELAY, "Frame Relay"),
784         DLT_CHOICE(DLT_LOOP, "OpenBSD loopback"),
785         DLT_CHOICE(DLT_ENC, "OpenBSD encapsulated IP"),
786         DLT_CHOICE(DLT_LINUX_SLL, "Linux cooked"),
787         DLT_CHOICE(DLT_LTALK, "Localtalk"),
788         DLT_CHOICE(DLT_PFLOG, "OpenBSD pflog file"),
789         DLT_CHOICE(DLT_PFSYNC, "Packet filter state syncing"),
790         DLT_CHOICE(DLT_PRISM_HEADER, "802.11 plus Prism header"),
791         DLT_CHOICE(DLT_IP_OVER_FC, "RFC 2625 IP-over-Fibre Channel"),
792         DLT_CHOICE(DLT_SUNATM, "Sun raw ATM"),
793         DLT_CHOICE(DLT_IEEE802_11_RADIO, "802.11 plus radiotap header"),
794         DLT_CHOICE(DLT_ARCNET_LINUX, "Linux ARCNET"),
795         DLT_CHOICE(DLT_JUNIPER_MLPPP, "Juniper Multi-Link PPP"),
796         DLT_CHOICE(DLT_JUNIPER_MLFR, "Juniper Multi-Link Frame Relay"),
797         DLT_CHOICE(DLT_JUNIPER_ES, "Juniper Encryption Services PIC"),
798         DLT_CHOICE(DLT_JUNIPER_GGSN, "Juniper GGSN PIC"),
799         DLT_CHOICE(DLT_JUNIPER_MFR, "Juniper FRF.16 Frame Relay"),
800         DLT_CHOICE(DLT_JUNIPER_ATM2, "Juniper ATM2 PIC"),
801         DLT_CHOICE(DLT_JUNIPER_SERVICES, "Juniper Advanced Services PIC"),
802         DLT_CHOICE(DLT_JUNIPER_ATM1, "Juniper ATM1 PIC"),
803         DLT_CHOICE(DLT_APPLE_IP_OVER_IEEE1394, "Apple IP-over-IEEE 1394"),
804         DLT_CHOICE(DLT_MTP2_WITH_PHDR, "SS7 MTP2 with Pseudo-header"),
805         DLT_CHOICE(DLT_MTP2, "SS7 MTP2"),
806         DLT_CHOICE(DLT_MTP3, "SS7 MTP3"),
807         DLT_CHOICE(DLT_SCCP, "SS7 SCCP"),
808         DLT_CHOICE(DLT_DOCSIS, "DOCSIS"),
809         DLT_CHOICE(DLT_LINUX_IRDA, "Linux IrDA"),
810         DLT_CHOICE(DLT_IEEE802_11_RADIO_AVS, "802.11 plus AVS radio information header"),
811         DLT_CHOICE(DLT_JUNIPER_MONITOR, "Juniper Passive Monitor PIC"),
812         DLT_CHOICE(DLT_PPP_PPPD, "PPP for pppd, with direction flag"),
813         DLT_CHOICE(DLT_JUNIPER_PPPOE, "Juniper PPPoE"),
814         DLT_CHOICE(DLT_JUNIPER_PPPOE_ATM, "Juniper PPPoE/ATM"),
815         DLT_CHOICE(DLT_GPRS_LLC, "GPRS LLC"),
816         DLT_CHOICE(DLT_GPF_T, "GPF-T"),
817         DLT_CHOICE(DLT_GPF_F, "GPF-F"),
818         DLT_CHOICE(DLT_JUNIPER_PIC_PEER, "Juniper PIC Peer"),
819         DLT_CHOICE(DLT_ERF_ETH, "Ethernet with Endace ERF header"),
820         DLT_CHOICE(DLT_ERF_POS, "Packet-over-SONET with Endace ERF header"),
821         DLT_CHOICE(DLT_LINUX_LAPD, "Linux vISDN LAPD"),
822         DLT_CHOICE(DLT_JUNIPER_ETHER, "Juniper Ethernet"),
823         DLT_CHOICE(DLT_JUNIPER_PPP, "Juniper PPP"),
824         DLT_CHOICE(DLT_JUNIPER_FRELAY, "Juniper Frame Relay"),
825         DLT_CHOICE(DLT_JUNIPER_CHDLC, "Juniper C-HDLC"),
826         DLT_CHOICE(DLT_MFR, "FRF.16 Frame Relay"),
827         DLT_CHOICE(DLT_JUNIPER_VP, "Juniper Voice PIC"),
828         DLT_CHOICE(DLT_A429, "Arinc 429"),
829         DLT_CHOICE(DLT_A653_ICM, "Arinc 653 Interpartition Communication"),
830         DLT_CHOICE(DLT_USB, "USB"),
831         DLT_CHOICE(DLT_BLUETOOTH_HCI_H4, "Bluetooth HCI UART transport layer"),
832         DLT_CHOICE(DLT_IEEE802_16_MAC_CPS, "IEEE 802.16 MAC Common Part Sublayer"),
833         DLT_CHOICE(DLT_USB_LINUX, "USB with Linux header"),
834         DLT_CHOICE(DLT_CAN20B, "Controller Area Network (CAN) v. 2.0B"),
835         DLT_CHOICE(DLT_IEEE802_15_4_LINUX, "IEEE 802.15.4 with Linux padding"),
836         DLT_CHOICE(DLT_PPI, "Per-Packet Information"),
837         DLT_CHOICE(DLT_IEEE802_16_MAC_CPS_RADIO, "IEEE 802.16 MAC Common Part Sublayer plus radiotap header"),
838         DLT_CHOICE(DLT_JUNIPER_ISM, "Juniper Integrated Service Module"),
839         DLT_CHOICE(DLT_IEEE802_15_4, "IEEE 802.15.4 with FCS"),
840         DLT_CHOICE(DLT_SITA, "SITA pseudo-header"),
841         DLT_CHOICE(DLT_ERF, "Endace ERF header"),
842         DLT_CHOICE(DLT_RAIF1, "Ethernet with u10 Networks pseudo-header"),
843         DLT_CHOICE(DLT_IPMB, "IPMB"),
844         DLT_CHOICE(DLT_JUNIPER_ST, "Juniper Secure Tunnel"),
845         DLT_CHOICE(DLT_BLUETOOTH_HCI_H4_WITH_PHDR, "Bluetooth HCI UART transport layer plus pseudo-header"),
846         DLT_CHOICE(DLT_AX25_KISS, "AX.25 with KISS header"),
847         DLT_CHOICE(DLT_IEEE802_15_4_NONASK_PHY, "IEEE 802.15.4 with non-ASK PHY data"),
848         DLT_CHOICE(DLT_MPLS, "MPLS with label as link-layer header"),
849         DLT_CHOICE(DLT_USB_LINUX_MMAPPED, "USB with padded Linux header"),
850         DLT_CHOICE(DLT_DECT, "DECT"),
851         DLT_CHOICE(DLT_AOS, "AOS Space Data Link protocol"),
852         DLT_CHOICE(DLT_WIHART, "Wireless HART"),
853         DLT_CHOICE(DLT_FC_2, "Fibre Channel FC-2"),
854         DLT_CHOICE(DLT_FC_2_WITH_FRAME_DELIMS, "Fibre Channel FC-2 with frame delimiters"),
855         DLT_CHOICE(DLT_IPNET, "Solaris ipnet"),
856         DLT_CHOICE(DLT_CAN_SOCKETCAN, "CAN-bus with SocketCAN headers"),
857         DLT_CHOICE(DLT_IPV4, "Raw IPv4"),
858         DLT_CHOICE(DLT_IPV6, "Raw IPv6"),
859         DLT_CHOICE(DLT_IEEE802_15_4_NOFCS, "IEEE 802.15.4 without FCS"),
860         DLT_CHOICE(DLT_JUNIPER_VS, "Juniper Virtual Server"),
861         DLT_CHOICE(DLT_JUNIPER_SRX_E2E, "Juniper SRX E2E"),
862         DLT_CHOICE(DLT_JUNIPER_FIBRECHANNEL, "Juniper Fibre Channel"),
863         DLT_CHOICE(DLT_DVB_CI, "DVB-CI"),
864         DLT_CHOICE(DLT_JUNIPER_ATM_CEMIC, "Juniper ATM CEMIC"),
865         DLT_CHOICE(DLT_NFLOG, "Linux netfilter log messages"),
866         DLT_CHOICE(DLT_NETANALYZER, "Ethernet with Hilscher netANALYZER pseudo-header"),
867         DLT_CHOICE(DLT_NETANALYZER_TRANSPARENT, "Ethernet with Hilscher netANALYZER pseudo-header and with preamble and SFD"),
868         DLT_CHOICE(DLT_IPOIB, "RFC 4391 IP-over-Infiniband"),
869         DLT_CHOICE_SENTINEL
870 };
871
872 int
873 pcap_datalink_name_to_val(const char *name)
874 {
875         int i;
876
877         for (i = 0; dlt_choices[i].name != NULL; i++) {
878                 if (pcap_strcasecmp(dlt_choices[i].name + sizeof("DLT_") - 1,
879                     name) == 0)
880                         return (dlt_choices[i].dlt);
881         }
882         return (-1);
883 }
884
885 const char *
886 pcap_datalink_val_to_name(int dlt)
887 {
888         int i;
889
890         for (i = 0; dlt_choices[i].name != NULL; i++) {
891                 if (dlt_choices[i].dlt == dlt)
892                         return (dlt_choices[i].name + sizeof("DLT_") - 1);
893         }
894         return (NULL);
895 }
896
897 const char *
898 pcap_datalink_val_to_description(int dlt)
899 {
900         int i;
901
902         for (i = 0; dlt_choices[i].name != NULL; i++) {
903                 if (dlt_choices[i].dlt == dlt)
904                         return (dlt_choices[i].description);
905         }
906         return (NULL);
907 }
908
909 struct tstamp_type_choice {
910         const char *name;
911         const char *description;
912         int     type;
913 };
914
915 static struct tstamp_type_choice tstamp_type_choices[] = {
916         { "host", "Host", PCAP_TSTAMP_HOST },
917         { "host_lowprec", "Host, low precision", PCAP_TSTAMP_HOST_LOWPREC },
918         { "host_hiprec", "Host, high precision", PCAP_TSTAMP_HOST_HIPREC },
919         { "adapter", "Adapter", PCAP_TSTAMP_ADAPTER },
920         { "adapter_unsynced", "Adapter, not synced with system time", PCAP_TSTAMP_ADAPTER_UNSYNCED },
921         { NULL, NULL, 0 }
922 };
923
924 int
925 pcap_tstamp_type_name_to_val(const char *name)
926 {
927         int i;
928
929         for (i = 0; tstamp_type_choices[i].name != NULL; i++) {
930                 if (pcap_strcasecmp(tstamp_type_choices[i].name, name) == 0)
931                         return (tstamp_type_choices[i].type);
932         }
933         return (PCAP_ERROR);
934 }
935
936 const char *
937 pcap_tstamp_type_val_to_name(int tstamp_type)
938 {
939         int i;
940
941         for (i = 0; tstamp_type_choices[i].name != NULL; i++) {
942                 if (tstamp_type_choices[i].type == tstamp_type)
943                         return (tstamp_type_choices[i].name);
944         }
945         return (NULL);
946 }
947
948 const char *
949 pcap_tstamp_type_val_to_description(int tstamp_type)
950 {
951         int i;
952
953         for (i = 0; tstamp_type_choices[i].name != NULL; i++) {
954                 if (tstamp_type_choices[i].type == tstamp_type)
955                         return (tstamp_type_choices[i].description);
956         }
957         return (NULL);
958 }
959
960 int
961 pcap_snapshot(pcap_t *p)
962 {
963         return (p->snapshot);
964 }
965
966 int
967 pcap_is_swapped(pcap_t *p)
968 {
969         return (p->sf.swapped);
970 }
971
972 int
973 pcap_major_version(pcap_t *p)
974 {
975         return (p->sf.version_major);
976 }
977
978 int
979 pcap_minor_version(pcap_t *p)
980 {
981         return (p->sf.version_minor);
982 }
983
984 FILE *
985 pcap_file(pcap_t *p)
986 {
987         return (p->sf.rfile);
988 }
989
990 int
991 pcap_fileno(pcap_t *p)
992 {
993 #ifndef WIN32
994         return (p->fd);
995 #else
996         if (p->adapter != NULL)
997                 return ((int)(DWORD)p->adapter->hFile);
998         else
999                 return (-1);
1000 #endif
1001 }
1002
1003 #if !defined(WIN32) && !defined(MSDOS)
1004 int
1005 pcap_get_selectable_fd(pcap_t *p)
1006 {
1007         return (p->selectable_fd);
1008 }
1009 #endif
1010
1011 void
1012 pcap_perror(pcap_t *p, char *prefix)
1013 {
1014         fprintf(stderr, "%s: %s\n", prefix, p->errbuf);
1015 }
1016
1017 char *
1018 pcap_geterr(pcap_t *p)
1019 {
1020         return (p->errbuf);
1021 }
1022
1023 int
1024 pcap_getnonblock(pcap_t *p, char *errbuf)
1025 {
1026         return (p->getnonblock_op(p, errbuf));
1027 }
1028
1029 /*
1030  * Get the current non-blocking mode setting, under the assumption that
1031  * it's just the standard POSIX non-blocking flag.
1032  *
1033  * We don't look at "p->nonblock", in case somebody tweaked the FD
1034  * directly.
1035  */
1036 #if !defined(WIN32) && !defined(MSDOS)
1037 int
1038 pcap_getnonblock_fd(pcap_t *p, char *errbuf)
1039 {
1040         int fdflags;
1041
1042         fdflags = fcntl(p->fd, F_GETFL, 0);
1043         if (fdflags == -1) {
1044                 snprintf(p->errbuf, PCAP_ERRBUF_SIZE, "F_GETFL: %s",
1045                     pcap_strerror(errno));
1046                 return (-1);
1047         }
1048         if (fdflags & O_NONBLOCK)
1049                 return (1);
1050         else
1051                 return (0);
1052 }
1053 #endif
1054
1055 int
1056 pcap_setnonblock(pcap_t *p, int nonblock, char *errbuf)
1057 {
1058         return (p->setnonblock_op(p, nonblock, errbuf));
1059 }
1060
1061 #if !defined(WIN32) && !defined(MSDOS)
1062 /*
1063  * Set non-blocking mode, under the assumption that it's just the
1064  * standard POSIX non-blocking flag.  (This can be called by the
1065  * per-platform non-blocking-mode routine if that routine also
1066  * needs to do some additional work.)
1067  */
1068 int
1069 pcap_setnonblock_fd(pcap_t *p, int nonblock, char *errbuf)
1070 {
1071         int fdflags;
1072
1073         fdflags = fcntl(p->fd, F_GETFL, 0);
1074         if (fdflags == -1) {
1075                 snprintf(p->errbuf, PCAP_ERRBUF_SIZE, "F_GETFL: %s",
1076                     pcap_strerror(errno));
1077                 return (-1);
1078         }
1079         if (nonblock)
1080                 fdflags |= O_NONBLOCK;
1081         else
1082                 fdflags &= ~O_NONBLOCK;
1083         if (fcntl(p->fd, F_SETFL, fdflags) == -1) {
1084                 snprintf(p->errbuf, PCAP_ERRBUF_SIZE, "F_SETFL: %s",
1085                     pcap_strerror(errno));
1086                 return (-1);
1087         }
1088         return (0);
1089 }
1090 #endif
1091
1092 #ifdef WIN32
1093 /*
1094  * Generate a string for the last Win32-specific error (i.e. an error generated when 
1095  * calling a Win32 API).
1096  * For errors occurred during standard C calls, we still use pcap_strerror()
1097  */
1098 char *
1099 pcap_win32strerror(void)
1100 {
1101         DWORD error;
1102         static char errbuf[PCAP_ERRBUF_SIZE+1];
1103         int errlen;
1104         char *p;
1105
1106         error = GetLastError();
1107         FormatMessage(FORMAT_MESSAGE_FROM_SYSTEM, NULL, error, 0, errbuf,
1108             PCAP_ERRBUF_SIZE, NULL);
1109
1110         /*
1111          * "FormatMessage()" "helpfully" sticks CR/LF at the end of the
1112          * message.  Get rid of it.
1113          */
1114         errlen = strlen(errbuf);
1115         if (errlen >= 2) {
1116                 errbuf[errlen - 1] = '\0';
1117                 errbuf[errlen - 2] = '\0';
1118         }
1119         p = strchr(errbuf, '\0');
1120         snprintf (p, sizeof(errbuf)-(p-errbuf), " (%lu)", error);
1121         return (errbuf);
1122 }
1123 #endif
1124
1125 /*
1126  * Generate error strings for PCAP_ERROR_ and PCAP_WARNING_ values.
1127  */
1128 const char *
1129 pcap_statustostr(int errnum)
1130 {
1131         static char ebuf[15+10+1];
1132
1133         switch (errnum) {
1134
1135         case PCAP_WARNING:
1136                 return("Generic warning");
1137
1138         case PCAP_WARNING_TSTAMP_TYPE_NOTSUP:
1139                 return ("That type of time stamp is not supported by that device");
1140
1141         case PCAP_WARNING_PROMISC_NOTSUP:
1142                 return ("That device doesn't support promiscuous mode");
1143
1144         case PCAP_ERROR:
1145                 return("Generic error");
1146
1147         case PCAP_ERROR_BREAK:
1148                 return("Loop terminated by pcap_breakloop");
1149
1150         case PCAP_ERROR_NOT_ACTIVATED:
1151                 return("The pcap_t has not been activated");
1152
1153         case PCAP_ERROR_ACTIVATED:
1154                 return ("The setting can't be changed after the pcap_t is activated");
1155
1156         case PCAP_ERROR_NO_SUCH_DEVICE:
1157                 return ("No such device exists");
1158
1159         case PCAP_ERROR_RFMON_NOTSUP:
1160                 return ("That device doesn't support monitor mode");
1161
1162         case PCAP_ERROR_NOT_RFMON:
1163                 return ("That operation is supported only in monitor mode");
1164
1165         case PCAP_ERROR_PERM_DENIED:
1166                 return ("You don't have permission to capture on that device");
1167
1168         case PCAP_ERROR_IFACE_NOT_UP:
1169                 return ("That device is not up");
1170
1171         case PCAP_ERROR_CANTSET_TSTAMP_TYPE:
1172                 return ("That device doesn't support setting the time stamp type");
1173
1174         case PCAP_ERROR_PROMISC_PERM_DENIED:
1175                 return ("You don't have permission to capture in promiscuous mode on that device");
1176         }
1177         (void)snprintf(ebuf, sizeof ebuf, "Unknown error: %d", errnum);
1178         return(ebuf);
1179 }
1180
1181 /*
1182  * Not all systems have strerror().
1183  */
1184 const char *
1185 pcap_strerror(int errnum)
1186 {
1187 #ifdef HAVE_STRERROR
1188         return (strerror(errnum));
1189 #else
1190         extern int sys_nerr;
1191         extern const char *const sys_errlist[];
1192         static char ebuf[15+10+1];
1193
1194         if ((unsigned int)errnum < sys_nerr)
1195                 return ((char *)sys_errlist[errnum]);
1196         (void)snprintf(ebuf, sizeof ebuf, "Unknown error: %d", errnum);
1197         return(ebuf);
1198 #endif
1199 }
1200
1201 int
1202 pcap_setfilter(pcap_t *p, struct bpf_program *fp)
1203 {
1204         return (p->setfilter_op(p, fp));
1205 }
1206
1207 /*
1208  * Set direction flag, which controls whether we accept only incoming
1209  * packets, only outgoing packets, or both.
1210  * Note that, depending on the platform, some or all direction arguments
1211  * might not be supported.
1212  */
1213 int
1214 pcap_setdirection(pcap_t *p, pcap_direction_t d)
1215 {
1216         if (p->setdirection_op == NULL) {
1217                 snprintf(p->errbuf, PCAP_ERRBUF_SIZE,
1218                     "Setting direction is not implemented on this platform");
1219                 return (-1);
1220         } else
1221                 return (p->setdirection_op(p, d));
1222 }
1223
1224 int
1225 pcap_stats(pcap_t *p, struct pcap_stat *ps)
1226 {
1227         return (p->stats_op(p, ps));
1228 }
1229
1230 static int
1231 pcap_stats_dead(pcap_t *p, struct pcap_stat *ps _U_)
1232 {
1233         snprintf(p->errbuf, PCAP_ERRBUF_SIZE,
1234             "Statistics aren't available from a pcap_open_dead pcap_t");
1235         return (-1);
1236 }
1237
1238 #ifdef WIN32
1239 int
1240 pcap_setbuff(pcap_t *p, int dim)
1241 {
1242         return (p->setbuff_op(p, dim));
1243 }
1244
1245 static int
1246 pcap_setbuff_dead(pcap_t *p, int dim)
1247 {
1248         snprintf(p->errbuf, PCAP_ERRBUF_SIZE,
1249             "The kernel buffer size cannot be set on a pcap_open_dead pcap_t");
1250         return (-1);
1251 }
1252
1253 int
1254 pcap_setmode(pcap_t *p, int mode)
1255 {
1256         return (p->setmode_op(p, mode));
1257 }
1258
1259 static int
1260 pcap_setmode_dead(pcap_t *p, int mode)
1261 {
1262         snprintf(p->errbuf, PCAP_ERRBUF_SIZE,
1263             "impossible to set mode on a pcap_open_dead pcap_t");
1264         return (-1);
1265 }
1266
1267 int
1268 pcap_setmintocopy(pcap_t *p, int size)
1269 {
1270         return (p->setmintocopy_op(p, size));
1271 }
1272
1273 static int
1274 pcap_setmintocopy_dead(pcap_t *p, int size)
1275 {
1276         snprintf(p->errbuf, PCAP_ERRBUF_SIZE,
1277             "The mintocopy parameter cannot be set on a pcap_open_dead pcap_t");
1278         return (-1);
1279 }
1280 #endif
1281
1282 /*
1283  * On some platforms, we need to clean up promiscuous or monitor mode
1284  * when we close a device - and we want that to happen even if the
1285  * application just exits without explicitl closing devices.
1286  * On those platforms, we need to register a "close all the pcaps"
1287  * routine to be called when we exit, and need to maintain a list of
1288  * pcaps that need to be closed to clean up modes.
1289  *
1290  * XXX - not thread-safe.
1291  */
1292
1293 /*
1294  * List of pcaps on which we've done something that needs to be
1295  * cleaned up.
1296  * If there are any such pcaps, we arrange to call "pcap_close_all()"
1297  * when we exit, and have it close all of them.
1298  */
1299 static struct pcap *pcaps_to_close;
1300
1301 /*
1302  * TRUE if we've already called "atexit()" to cause "pcap_close_all()" to
1303  * be called on exit.
1304  */
1305 static int did_atexit;
1306
1307 static void
1308 pcap_close_all(void)
1309 {
1310         struct pcap *handle;
1311
1312         while ((handle = pcaps_to_close) != NULL)
1313                 pcap_close(handle);
1314 }
1315
1316 int
1317 pcap_do_addexit(pcap_t *p)
1318 {
1319         /*
1320          * If we haven't already done so, arrange to have
1321          * "pcap_close_all()" called when we exit.
1322          */
1323         if (!did_atexit) {
1324                 if (atexit(pcap_close_all) == -1) {
1325                         /*
1326                          * "atexit()" failed; let our caller know.
1327                          */
1328                         strncpy(p->errbuf, "atexit failed",
1329                             PCAP_ERRBUF_SIZE);
1330                         return (0);
1331                 }
1332                 did_atexit = 1;
1333         }
1334         return (1);
1335 }
1336
1337 void
1338 pcap_add_to_pcaps_to_close(pcap_t *p)
1339 {
1340         p->md.next = pcaps_to_close;
1341         pcaps_to_close = p;
1342 }
1343
1344 void
1345 pcap_remove_from_pcaps_to_close(pcap_t *p)
1346 {
1347         pcap_t *pc, *prevpc;
1348
1349         for (pc = pcaps_to_close, prevpc = NULL; pc != NULL;
1350             prevpc = pc, pc = pc->md.next) {
1351                 if (pc == p) {
1352                         /*
1353                          * Found it.  Remove it from the list.
1354                          */
1355                         if (prevpc == NULL) {
1356                                 /*
1357                                  * It was at the head of the list.
1358                                  */
1359                                 pcaps_to_close = pc->md.next;
1360                         } else {
1361                                 /*
1362                                  * It was in the middle of the list.
1363                                  */
1364                                 prevpc->md.next = pc->md.next;
1365                         }
1366                         break;
1367                 }
1368         }
1369 }
1370
1371 void
1372 pcap_cleanup_live_common(pcap_t *p)
1373 {
1374         if (p->buffer != NULL) {
1375                 free(p->buffer);
1376                 p->buffer = NULL;
1377         }
1378         if (p->dlt_list != NULL) {
1379                 free(p->dlt_list);
1380                 p->dlt_list = NULL;
1381                 p->dlt_count = 0;
1382         }
1383         if (p->tstamp_type_list != NULL) {
1384                 free(p->tstamp_type_list);
1385                 p->tstamp_type_list = NULL;
1386                 p->tstamp_type_count = 0;
1387         }
1388         pcap_freecode(&p->fcode);
1389 #if !defined(WIN32) && !defined(MSDOS)
1390         if (p->fd >= 0) {
1391                 close(p->fd);
1392                 p->fd = -1;
1393         }
1394         p->selectable_fd = -1;
1395         p->send_fd = -1;
1396 #endif
1397 }
1398
1399 static void
1400 pcap_cleanup_dead(pcap_t *p _U_)
1401 {
1402         /* Nothing to do. */
1403 }
1404
1405 pcap_t *
1406 pcap_open_dead(int linktype, int snaplen)
1407 {
1408         pcap_t *p;
1409
1410         p = malloc(sizeof(*p));
1411         if (p == NULL)
1412                 return NULL;
1413         memset (p, 0, sizeof(*p));
1414         p->snapshot = snaplen;
1415         p->linktype = linktype;
1416         p->stats_op = pcap_stats_dead;
1417 #ifdef WIN32
1418         p->setbuff_op = pcap_setbuff_dead;
1419         p->setmode_op = pcap_setmode_dead;
1420         p->setmintocopy_op = pcap_setmintocopy_dead;
1421 #endif
1422         p->cleanup_op = pcap_cleanup_dead;
1423         p->activated = 1;
1424         return (p);
1425 }
1426
1427 /*
1428  * API compatible with WinPcap's "send a packet" routine - returns -1
1429  * on error, 0 otherwise.
1430  *
1431  * XXX - what if we get a short write?
1432  */
1433 int
1434 pcap_sendpacket(pcap_t *p, const u_char *buf, int size)
1435 {
1436         if (p->inject_op(p, buf, size) == -1)
1437                 return (-1);
1438         return (0);
1439 }
1440
1441 /*
1442  * API compatible with OpenBSD's "send a packet" routine - returns -1 on
1443  * error, number of bytes written otherwise.
1444  */
1445 int
1446 pcap_inject(pcap_t *p, const void *buf, size_t size)
1447 {
1448         return (p->inject_op(p, buf, size));
1449 }
1450
1451 void
1452 pcap_close(pcap_t *p)
1453 {
1454         if (p->opt.source != NULL)
1455                 free(p->opt.source);
1456         p->cleanup_op(p);
1457         free(p);
1458 }
1459
1460 /*
1461  * Given a BPF program, a pcap_pkthdr structure for a packet, and the raw
1462  * data for the packet, check whether the packet passes the filter.
1463  * Returns the return value of the filter program, which will be zero if
1464  * the packet doesn't pass and non-zero if the packet does pass.
1465  */
1466 int
1467 pcap_offline_filter(struct bpf_program *fp, const struct pcap_pkthdr *h,
1468     const u_char *pkt)
1469 {
1470         struct bpf_insn *fcode = fp->bf_insns;
1471
1472         if (fcode != NULL) 
1473                 return (bpf_filter(fcode, pkt, h->len, h->caplen));
1474         else
1475                 return (0);
1476 }
1477
1478 /*
1479  * We make the version string static, and return a pointer to it, rather
1480  * than exporting the version string directly.  On at least some UNIXes,
1481  * if you import data from a shared library into an program, the data is
1482  * bound into the program binary, so if the string in the version of the
1483  * library with which the program was linked isn't the same as the
1484  * string in the version of the library with which the program is being
1485  * run, various undesirable things may happen (warnings, the string
1486  * being the one from the version of the library with which the program
1487  * was linked, or even weirder things, such as the string being the one
1488  * from the library but being truncated).
1489  */
1490 #ifdef HAVE_VERSION_H
1491 #include "version.h"
1492 #else
1493 static const char pcap_version_string[] = "libpcap version 1.x.y";
1494 #endif
1495
1496 #ifdef WIN32
1497 /*
1498  * XXX - it'd be nice if we could somehow generate the WinPcap and libpcap
1499  * version numbers when building WinPcap.  (It'd be nice to do so for
1500  * the packet.dll version number as well.)
1501  */
1502 static const char wpcap_version_string[] = "4.0";
1503 static const char pcap_version_string_fmt[] =
1504     "WinPcap version %s, based on %s";
1505 static const char pcap_version_string_packet_dll_fmt[] =
1506     "WinPcap version %s (packet.dll version %s), based on %s";
1507 static char *full_pcap_version_string;
1508
1509 const char *
1510 pcap_lib_version(void)
1511 {
1512         char *packet_version_string;
1513         size_t full_pcap_version_string_len;
1514
1515         if (full_pcap_version_string == NULL) {
1516                 /*
1517                  * Generate the version string.
1518                  */
1519                 packet_version_string = PacketGetVersion();
1520                 if (strcmp(wpcap_version_string, packet_version_string) == 0) {
1521                         /*
1522                          * WinPcap version string and packet.dll version
1523                          * string are the same; just report the WinPcap
1524                          * version.
1525                          */
1526                         full_pcap_version_string_len =
1527                             (sizeof pcap_version_string_fmt - 4) +
1528                             strlen(wpcap_version_string) +
1529                             strlen(pcap_version_string);
1530                         full_pcap_version_string =
1531                             malloc(full_pcap_version_string_len);
1532                         sprintf(full_pcap_version_string,
1533                             pcap_version_string_fmt, wpcap_version_string,
1534                             pcap_version_string);
1535                 } else {
1536                         /*
1537                          * WinPcap version string and packet.dll version
1538                          * string are different; that shouldn't be the
1539                          * case (the two libraries should come from the
1540                          * same version of WinPcap), so we report both
1541                          * versions.
1542                          */
1543                         full_pcap_version_string_len =
1544                             (sizeof pcap_version_string_packet_dll_fmt - 6) +
1545                             strlen(wpcap_version_string) +
1546                             strlen(packet_version_string) +
1547                             strlen(pcap_version_string);
1548                         full_pcap_version_string = malloc(full_pcap_version_string_len);
1549
1550                         sprintf(full_pcap_version_string,
1551                             pcap_version_string_packet_dll_fmt,
1552                             wpcap_version_string, packet_version_string,
1553                             pcap_version_string);
1554                 }
1555         }
1556         return (full_pcap_version_string);
1557 }
1558
1559 #elif defined(MSDOS)
1560
1561 static char *full_pcap_version_string;
1562
1563 const char *
1564 pcap_lib_version (void)
1565 {
1566         char *packet_version_string;
1567         size_t full_pcap_version_string_len;
1568         static char dospfx[] = "DOS-";
1569
1570         if (full_pcap_version_string == NULL) {
1571                 /*
1572                  * Generate the version string.
1573                  */
1574                 full_pcap_version_string_len =
1575                     sizeof dospfx + strlen(pcap_version_string);
1576                 full_pcap_version_string =
1577                     malloc(full_pcap_version_string_len);
1578                 strcpy(full_pcap_version_string, dospfx);
1579                 strcat(full_pcap_version_string, pcap_version_string);
1580         }
1581         return (full_pcap_version_string);
1582 }
1583
1584 #else /* UN*X */
1585
1586 const char *
1587 pcap_lib_version(void)
1588 {
1589         return (pcap_version_string);
1590 }
1591 #endif