# @(#)printcap 5.3 (Berkeley) 6/30/90 # $FreeBSD: src/etc/printcap,v 1.10.2.2 2002/08/07 10:33:39 blackend Exp $ # $DragonFly: src/etc/printcap,v 1.3 2008/02/11 15:59:37 matthias Exp $ # # This enables a simple local "raw" printer, hooked up to the first # parallel port. No kind of filtering is done, so everything you pass # to the "lpr" command will be printed unmodified. # # Remember, for further print queues you're going to add, you have # to choose different spool directories (the "sd" capability below), # otherwise you will greatly confuse lpd. # # For some advanced printing, have a look at the "apsfilter" package. # It plugs into the lpd system, allowing you to print a variety of # different file types by converting everything to PostScript(tm) # format. For more information about apsfilter visit # # http://www.apsfilter.org/ # # If you don't have a PostScript(tm) printer, don't panic, but do # also install the latest "ghostscript" package for best printer support. # # Do also refer to the "printing" section of the handbook. # # http://www.dragonflybsd.org/docs/handbook/handbook-printing/ # # Banner pages are now suppressed by default. Remove the :sh: capability # to turn them back on. # #lp|local line printer:\ # :sh:\ # :lp=/dev/lpt0:sd=/var/spool/output/lpd:lf=/var/log/lpd-errs: # # Sample remote printer. The physical printer is on machine "lphost". # You can perform any kind of local filtering directly. If you need # local filters (e.g. LF -> CR-LF conversion for HP printers), create # a filter script that sends the proper escape sequence to the printer # and then concatenates stdin to stdout. # #remote|sample remote printer:\ # :sh:\ # :rm=lphost:sd=/var/spool/output/lphost:lf=/var/log/lpd-errs:\ # :if=/usr/local/libexec/if-script: # # Simple Russian printer with hardware CP866 character set, output filter # used for KOI8-R -> CP866 conversion # #lp|Russian local line printer:\ # :sh:of=/usr/libexec/lpr/ru/koi2alt:\ # :lp=/dev/lpt0:sd=/var/spool/output/lpd:lf=/var/log/lpd-errs: