# $FreeBSD: src/etc/defaults/make.conf,v 1.97.2.80 2003/02/15 16:34:56 trhodes Exp $ # # NOTE: Please would any committer updating this file also update the # make.conf(5) manual page, if necessary, which is located in # src/share/man/man5/make.conf.5. # # This file, if present, will be read by make (see /usr/share/mk/sys.mk). # It allows you to override macro definitions to make without changing # your source tree, or anything the source tree installs. # # This file must be in valid Makefile syntax. # # You have to find the things you can put here in the Makefiles and # documentation of the source tree. # # The CPUTYPE variable controls which processor should be targeted for # generated code. This controls processor-specific optimizations in # certain code (currently only OpenSSL) as well as modifying the value # of CFLAGS to contain the appropriate optimization directive to gcc. # The automatic setting of CFLAGS may be overridden using the # NO_CPU_CFLAGS variable below. # Currently the following CPU types are recognized: # Intel x86 architecture: # (AMD CPUs) opteron athlon-fx athlon64 k8 k7 k6-3 k6-2 k6 k5 # (Intel CPUs) p4 pentium-m p3 p2 i686 i586/mmx i586 i486 # # If you experience any problems after setting this flag, please unset # it again before submitting a bug report or attempting to modify code. # It may be that certain types of software will become unstable after being # compiled with processor-specific (or higher - see below) optimization flags. # If in doubt, do not set CPUTYPE or CFLAGS to non-default values. # #CPUTYPE=i686 #NO_CPU_CFLAGS= true # Don't add -march= to CFLAGS automatically #NO_CPU_COPTFLAGS=true # Don't add -march= to COPTFLAGS automatically # # The CCVER variable controls which GCC-version to use by default. It # should be set using ?= so as not to interfere with CCVER overrides from # userland or the buildworld. Note that building world or the kernel using # an experimental compiler might be broken at any time. We currently # recommend that an override NOT be set in /etc/make.conf. # #CCVER?=gcc41 # (use GCC 4.1, default) # # CFLAGS controls the compiler settings used when compiling C code. # Note that optimization settings above -O (-O2, ...) are not recommended # or supported for compiling the world or the kernel - please revert any # nonstandard optimization settings to "-O" before submitting bug reports # to the developers. # #CFLAGS= -O -pipe # # CXXFLAGS controls the compiler settings used when compiling C++ code. # Note that CXXFLAGS is initially set to the value of CFLAGS. If you wish # to add to CXXFLAGS value, "+=" must be used rather than "=". Using "=" # alone will remove the often needed contents of CFLAGS from CXXFLAGS. # #CXXFLAGS+= -fmemoize-lookups -fsave-memoized # # BDECFLAGS are a set of gcc warning settings that Bruce Evans has suggested # for use in developing FreeBSD and testing changes. They can be used by # putting "CFLAGS+=${BDECFLAGS}" in /etc/make.conf. -Wconversion is not # included here due to compiler bugs, e.g., mkdir()'s mode_t argument. # BDECFLAGS= -W -Wall -ansi -pedantic -Wbad-function-cast -Wcast-align \ -Wcast-qual -Wchar-subscripts -Winline \ -Wmissing-prototypes -Wnested-externs -Wpointer-arith \ -Wredundant-decls -Wshadow -Wstrict-prototypes -Wwrite-strings # # To compile just the kernel with special optimizations, you should use # this instead of CFLAGS (which is not applicable to kernel builds anyway). # There is very little to gain by using higher optimization levels, and doing # so can cause problems. # #COPTFLAGS= -O -pipe # # Strip the file before installing. Setting this to nothing will keep # the debugging symbols in the installed files. #STRIP= -s # # Compare before install #INSTALL=install -C # # To build ppp with normal permissions #PPP_NOSUID= true # # To enable installing ssh(1) with the setuid bit turned on #ENABLE_SUID_SSH= true # # Default thread library (c_r or thread_xu) THREAD_LIB?= thread_xu # # To enable Hesiod support in libc #WANT_HESIOD= true # # To disable name caching in the nsswitch subsystem. The generic caching # daemon, nscd(8), will not be built either if this option is set. #NO_NS_CACHING= true # # To avoid building various parts of the base system: #NO_CRYPT= true # do not build crypto code #NO_CVS= true # do not build CVS #NO_GAMES= true # do not enter the games subdirectory #NO_GCC44= true # do not build gcc-4.4 #NO_GDB= true # do not build GDB #NO_I4B= true # do not build isdn4bsd package #NO_IPFILTER= true # do not build IP Filter package #NO_LIBC_R= true # do not build libc_r (re-entrant version of libc) #NO_LPR= true # do not build lpr and related programs #NO_MAILWRAPPER=true # do not build the mailwrapper(8) MTA selector #NO_MODULES= true # do not build modules with the kernel #NO_OBJC= true # do not build Objective C support #NO_OPENSSH= true # do not build OpenSSH #NO_OPENSSL= true # do not build OpenSSL (implies NO_OPENSSH) #NO_SENDMAIL= true # do not build sendmail and related programs #NO_SHARE= true # do not enter the share subdirectory #NO_X= true # do not compile in XWindows support (e.g. doscmd) #NOINFO= true # do not make or install info files #NOINFOCOMPRESS=true # do not compress info files #NOMAN= true # do not build manual pages #NOMANCOMPRESS= true # do not compress man pages #NOPROFILE= true # Avoid compiling profiled libraries # # To build sys/modules when building the world (our old way of doing things) #MODULES_WITH_WORLD=true # do not build modules when building kernel # # The list of modules to build instead of all of them. #MODULES_OVERRIDE= emulation/linux net/ipfw # # The following controls building optional IDEA code in libcrypto. # Patents are involved - you must not use this unless # you either have a license or fall within patent 'fair use' # provisions. # # *** It is YOUR RESPONSIBILITY to determine if you can use this! *** # # IDEA is patented in the USA and many European countries - thought to # be OK to use for any non-commercial use. This is optional. #WANT_IDEA= YES # IDEA (128 bit symmetric encryption) # # The paper size for groff(1), either "letter" or "A4" #GROFF_PAPER_SIZE= letter # # Default format for system documentation, depends on your printer. # Set this to "ascii" for simple printers or screen # #PRINTERDEVICE= ps # # By default, the system will always use the keyboard/video card as system # console. However, the boot blocks may be dynamically configured to use a # serial port in addition to or instead of the keyboard/video console. # # By default we use COM1 as our serial console port *if* we're going to use # a serial port as our console at all. Alter as necessary. # # COM1: = 0x3F8, COM2: = 0x2F8, COM3: = 0x3E8, COM4: = 0x2E8 # #BOOT_COMCONSOLE_PORT= 0x3F8 # # The default serial console speed is 9600. Set the speed to a larger value # for better interactive response. # #BOOT_COMCONSOLE_SPEED= 115200 # # By default the 'pxeboot' loader retrieves the kernel via NFS. Defining # this and recompiling /usr/src/sys/boot will cause it to retrieve the kernel # via TFTP. This allows pxeboot to load a custom BOOTP diskless kernel yet # still mount the server's '/' (i.e. rather than load the server's kernel). # #LOADER_TFTP_SUPPORT= YES # # To build the installer as part of buildworld. #WANT_INSTALLER=yes # # Documentation # # The list of languages and encodings to build and install # #DOC_LANG= en_US.ISO8859-1 ru_RU.KOI8-R # # The list of locale modules to be compiled-in in the static # libc.a (and libc_p.a). #STATIC_LOCALES=BIG5 EUC EUCTW ISO2022 MSKanji UTF8 STATIC_LOCALES=UTF8 # sendmail # # The following sets the default m4 configuration file to use at # install time. Use with caution as a make install will overwrite # any existing /etc/mail/sendmail.cf. Note that SENDMAIL_CF is now # deprecated. The value should be a fully qualified path name. # Avoid using a value of /etc/mail/sendmail.mc as a buildworld will # create /etc/mail/sendmail.cf before installworld installs an # updated sendmail binary. # #SENDMAIL_MC=/etc/mail/myconfig.mc # # The following sets the default m4 configuration file for mail # submission to use at install time. Use with caution as a make # install will overwrite any existing /etc/mail/submit.cf. The # value should be a fully qualified path name. # Avoid using a value of /etc/mail/submit.mc as a buildworld will # create /etc/mail/submit.cf before installworld installs an # updated sendmail binary. # #SENDMAIL_SUBMIT_MC=/etc/mail/mysubmit.mc # # If you need to build additional .cf files during a make buildworld, # include the full paths to the .mc files in SENDMAIL_ADDITIONAL_MC. # Avoid using a value of /etc/mail/sendmail.mc as a buildworld will # create /etc/mail/sendmail.cf before installworld installs an # updated sendmail binary. # #SENDMAIL_ADDITIONAL_MC=/etc/mail/foo.mc /etc/mail/bar.mc # # Setting the following variable modifies the flags passed to m4 when # building a .cf file from a .mc file. It can be used to enable # features disabled by default. # #SENDMAIL_M4_FLAGS= # # Setting the following variables modifies the build environment for # sendmail and its related utilities. For example, SASL support can be # added with settings such as: # # with SASLv1: # SENDMAIL_CFLAGS=-I/usr/local/include/sasl1 -DSASL # SENDMAIL_LDFLAGS=-L/usr/local/lib # SENDMAIL_LDADD=-lsasl # # with SASLv2: # SENDMAIL_CFLAGS=-I/usr/local/include -DSASL=2 # SENDMAIL_LDFLAGS=-L/usr/local/lib # SENDMAIL_LDADD=-lsasl2 # # Note: If you are using Cyrus SASL with other applications which require # access to the sasldb file, you should add the following to your # sendmail.mc file: # # define(`confDONT_BLAME_SENDMAIL',`GroupReadableSASLDBFile') # #SENDMAIL_CFLAGS= #SENDMAIL_LDFLAGS= #SENDMAIL_LDADD= #SENDMAIL_DPADD= # # Setting SENDMAIL_SET_USER_ID will install the sendmail binary as a # set-user-ID root binary instead of a set-group-ID smmsp binary and will # prevent the installation of /etc/mail/submit.cf. # This is a deprecated mode of operation. See etc/mail/README for more # information. # #SENDMAIL_SET_USER_ID= # # The permissions to use on alias and map databases generated using # /etc/mail/Makefile. Defaults to 0640. # #SENDMAIL_MAP_PERMS=