/*- * Copyright (c) 1997, 1998, 1999 * Bill Paul . All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by Bill Paul. * 4. Neither the name of the author nor the names of any co-contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF * THE POSSIBILITY OF SUCH DAMAGE. * * $FreeBSD: head/sys/dev/wi/if_wireg.h 192468 2009-05-20 20:00:40Z sam $ */ #define WI_DELAY 5 #define WI_TIMEOUT (500000/WI_DELAY) /* 500 ms */ #define WI_PORT0 (0 << 8) #define WI_PORT1 (1 << 8) #define WI_PORT2 (2 << 8) #define WI_PORT3 (3 << 8) #define WI_PORT4 (4 << 8) #define WI_PORT5 (5 << 8) #define WI_PCI_LMEMRES 0x10 /* PCI Memory (native PCI implementations) */ #define WI_PCI_LOCALRES 0x14 /* The PLX chip's local registers */ #define WI_PCI_MEMRES 0x18 /* The PCCard's attribute memory */ #define WI_PCI_IORES 0x1C /* The PCCard's I/O space */ #define WI_LOCAL_INTCSR 0x4c #define WI_LOCAL_INTEN 0x40 #define WI_HFA384X_SWSUPPORT0_OFF 0x28 #define WI_PRISM2STA_MAGIC 0x4A2D #define WI_PCICOR_OFF 0x26 #define WI_PCICOR_RESET 0x0080 /* Default port: 0 (only 0 exists on stations) */ #define WI_DEFAULT_PORT WI_PORT0 /* Default network name: ANY */ /* * [sommerfeld 1999/07/15] Changed from "ANY" to ""; according to Bill Fenner, * ANY is used in MS driver user interfaces, while "" is used over the * wire.. */ #define WI_DEFAULT_NETNAME "" #define WI_DEFAULT_AP_DENSITY 1 #define WI_DEFAULT_RTS_THRESH 2347 #define WI_DEFAULT_DATALEN 2304 #define WI_DEFAULT_CREATE_IBSS 0 #define WI_DEFAULT_PM_ENABLED 0 #define WI_DEFAULT_MAX_SLEEP 100 #define WI_DEFAULT_ROAMING 1 #define WI_DEFAULT_AUTHTYPE 1 #ifdef __NetBSD__ #define OS_STRING_NAME "NetBSD" #endif #ifdef __FreeBSD__ #define OS_STRING_NAME "FreeBSD" #endif #ifdef __OpenBSD__ #define OS_STRING_NAME "OpenBSD" #endif #define WI_DEFAULT_NODENAME OS_STRING_NAME " WaveLAN/IEEE node" #define WI_DEFAULT_IBSS OS_STRING_NAME " IBSS" #define WI_BUS_PCCARD 0 /* pccard device */ #define WI_BUS_PCI_PLX 1 /* PCI card w/ PLX PCI/PCMICA bridge */ #define WI_BUS_PCI_NATIVE 2 /* native PCI device (Prism 2.5) */ /* * register space access macros */ #define CSR_WRITE_4(sc, reg, val) \ bus_space_write_4((sc)->wi_btag, (sc)->wi_bhandle, \ (sc)->wi_bus_type == WI_BUS_PCI_NATIVE ? (reg)*2 : (reg), val) #define CSR_WRITE_2(sc, reg, val) \ bus_space_write_2((sc)->wi_btag, (sc)->wi_bhandle, \ (sc)->wi_bus_type == WI_BUS_PCI_NATIVE ? (reg)*2 : (reg), val) #define CSR_WRITE_1(sc, reg, val) \ bus_space_write_1((sc)->wi_btag, (sc)->wi_bhandle, \ (sc)->wi_bus_type == WI_BUS_PCI_NATIVE ? (reg)*2 : (reg), val) #define CSR_READ_4(sc, reg) \ bus_space_read_4((sc)->wi_btag, (sc)->wi_bhandle, \ (sc)->wi_bus_type == WI_BUS_PCI_NATIVE ? (reg)*2 : (reg)) #define CSR_READ_2(sc, reg) \ bus_space_read_2((sc)->wi_btag, (sc)->wi_bhandle, \ (sc)->wi_bus_type == WI_BUS_PCI_NATIVE ? (reg)*2 : (reg)) #define CSR_READ_1(sc, reg) \ bus_space_read_1((sc)->wi_btag, (sc)->wi_bhandle, \ (sc)->wi_bus_type == WI_BUS_PCI_NATIVE ? (reg)*2 : (reg)) #define CSM_WRITE_1(sc, off, val) \ bus_space_write_1((sc)->wi_bmemtag, (sc)->wi_bmemhandle, off, val) #define CSM_READ_1(sc, off) \ bus_space_read_1((sc)->wi_bmemtag, (sc)->wi_bmemhandle, off) #define CSR_WRITE_STREAM_2(sc, reg, val) \ bus_space_write_stream_2(sc->wi_btag, sc->wi_bhandle, \ (sc->wi_bus_type == WI_BUS_PCI_NATIVE ? (reg) * 2 : (reg)), val) #define CSR_WRITE_MULTI_STREAM_2(sc, reg, val, count) \ bus_space_write_multi_stream_2(sc->wi_btag, sc->wi_bhandle, \ (sc->wi_bus_type == WI_BUS_PCI_NATIVE ? (reg) * 2 : (reg)), val, count) #define CSR_READ_STREAM_2(sc, reg) \ bus_space_read_stream_2(sc->wi_btag, sc->wi_bhandle, \ (sc->wi_bus_type == WI_BUS_PCI_NATIVE ? (reg) * 2 : (reg))) #define CSR_READ_MULTI_STREAM_2(sc, reg, buf, count) \ bus_space_read_multi_stream_2(sc->wi_btag, sc->wi_bhandle, \ (sc->wi_bus_type == WI_BUS_PCI_NATIVE ? (reg) * 2 : (reg)), buf, count) /* * The WaveLAN/IEEE cards contain an 802.11 MAC controller which Lucent * calls 'Hermes.' In typical fashion, getting documentation about this * controller is about as easy as squeezing blood from a stone. Here * is more or less what I know: * * - The Hermes controller is firmware driven, and the host interacts * with the Hermes via a firmware interface, which can change. * * - The Hermes is described in a document called: "Hermes Firmware * WaveLAN/IEEE Station Functions," document #010245, which of course * Lucent will not release without an NDA. * * - Lucent has created a library called HCF (Hardware Control Functions) * though which it wants developers to interact with the card. The HCF * is needlessly complex, ill conceived and badly documented. Actually, * the comments in the HCP code itself aren't bad, but the publically * available manual that comes with it is awful, probably due largely to * the fact that it has been emasculated in order to hide information * that Lucent wants to keep proprietary. The purpose of the HCF seems * to be to insulate the driver programmer from the Hermes itself so that * Lucent has an excuse not to release programming in for it. * * - Lucent only makes available documentation and code for 'HCF Light' * which is a stripped down version of HCF with certain features not * implemented, most notably support for 802.11 frames. * * - The HCF code which I have seen blows goats. Whoever decided to * use a 132 column format should be shot. * * Rather than actually use the Lucent HCF library, I have stripped all * the useful information from it and used it to create a driver in the * usual BSD form. Note: I don't want to hear anybody whining about the * fact that the Lucent code is GPLed and mine isn't. I did not actually * put any of Lucent's code in this driver: I only used it as a reference * to obtain information about the underlying hardware. The Hermes * programming interface is not GPLed, so bite me. */ /* * Size of Hermes & Prism2 I/O space. */ #define WI_IOSIZ 0x40 /* * Hermes & Prism2 register definitions */ /* Hermes command/status registers. */ #define WI_COMMAND 0x00 #define WI_PARAM0 0x02 #define WI_PARAM1 0x04 #define WI_PARAM2 0x06 #define WI_STATUS 0x08 #define WI_RESP0 0x0A #define WI_RESP1 0x0C #define WI_RESP2 0x0E /* Command register values. */ #define WI_CMD_BUSY 0x8000 /* busy bit */ #define WI_CMD_INI 0x0000 /* initialize */ #define WI_CMD_ENABLE 0x0001 /* enable */ #define WI_CMD_DISABLE 0x0002 /* disable */ #define WI_CMD_DIAG 0x0003 #define WI_CMD_ALLOC_MEM 0x000A /* allocate NIC memory */ #define WI_CMD_TX 0x000B /* transmit */ #define WI_CMD_NOTIFY 0x0010 #define WI_CMD_INQUIRE 0x0011 #define WI_CMD_ACCESS 0x0021 #define WI_CMD_ACCESS_WRITE 0x0121 #define WI_CMD_PROGRAM 0x0022 #define WI_CMD_READEE 0x0030 /* symbol only */ #define WI_CMD_READMIF 0x0030 /* prism2 */ #define WI_CMD_WRITEMIF 0x0031 /* prism2 */ #define WI_CMD_DEBUG 0x0038 /* Various test commands */ #define WI_CMD_CODE_MASK 0x003F /* * Various cmd test stuff. */ #define WI_TEST_MONITOR 0x0B #define WI_TEST_STOP 0x0F #define WI_TEST_CFG_BITS 0x15 #define WI_TEST_CFG_BIT_ALC 0x08 /* * Reclaim qualifier bit, applicable to the * TX and INQUIRE commands. */ #define WI_RECLAIM 0x0100 /* reclaim NIC memory */ /* * ACCESS command qualifier bits. */ #define WI_ACCESS_READ 0x0000 #define WI_ACCESS_WRITE 0x0100 /* * PROGRAM command qualifier bits. */ #define WI_PROGRAM_DISABLE 0x0000 #define WI_PROGRAM_ENABLE_RAM 0x0100 #define WI_PROGRAM_ENABLE_NVRAM 0x0200 #define WI_PROGRAM_NVRAM 0x0300 /* Status register values */ #define WI_STAT_CMD_CODE 0x003F #define WI_STAT_DIAG_ERR 0x0100 #define WI_STAT_INQ_ERR 0x0500 #define WI_STAT_CMD_RESULT 0x7F00 /* memory handle management registers */ #define WI_INFO_FID 0x10 #define WI_RX_FID 0x20 #define WI_ALLOC_FID 0x22 #define WI_TX_CMP_FID 0x24 /* * Buffer Access Path (BAP) registers. * These are I/O channels. I believe you can use each one for * any desired purpose independently of the other. In general * though, we use BAP1 for reading and writing LTV records and * reading received data frames, and BAP0 for writing transmit * frames. This is a convention though, not a rule. */ #define WI_SEL0 0x18 #define WI_SEL1 0x1A #define WI_OFF0 0x1C #define WI_OFF1 0x1E #define WI_DATA0 0x36 #define WI_DATA1 0x38 #define WI_BAP0 WI_DATA0 #define WI_BAP1 WI_DATA1 #define WI_OFF_BUSY 0x8000 #define WI_OFF_ERR 0x4000 #define WI_OFF_DATAOFF 0x0FFF /* Event registers */ #define WI_EVENT_STAT 0x30 /* Event status */ #define WI_INT_EN 0x32 /* Interrupt enable/disable */ #define WI_EVENT_ACK 0x34 /* Ack event */ /* Events */ #define WI_EV_TICK 0x8000 /* aux timer tick */ #define WI_EV_RES 0x4000 /* controller h/w error (time out) */ #define WI_EV_INFO_DROP 0x2000 /* no RAM to build unsolicited frame */ #define WI_EV_NO_CARD 0x0800 /* card removed (hunh?) */ #define WI_EV_DUIF_RX 0x0400 /* wavelan management packet received */ #define WI_EV_INFO 0x0080 /* async info frame */ #define WI_EV_CMD 0x0010 /* command completed */ #define WI_EV_ALLOC 0x0008 /* async alloc/reclaim completed */ #define WI_EV_TX_EXC 0x0004 /* async xmit completed with failure */ #define WI_EV_TX 0x0002 /* async xmit completed succesfully */ #define WI_EV_RX 0x0001 /* async rx completed */ /* Host software registers */ #define WI_SW0 0x28 #define WI_SW1 0x2A #define WI_SW2 0x2C #define WI_SW3 0x2E /* does not appear in Prism2 */ #define WI_CNTL 0x14 #define WI_CNTL_AUX_ENA 0xC000 #define WI_CNTL_AUX_ENA_STAT 0xC000 #define WI_CNTL_AUX_DIS_STAT 0x0000 #define WI_CNTL_AUX_ENA_CNTL 0x8000 #define WI_CNTL_AUX_DIS_CNTL 0x4000 #define WI_AUX_PAGE 0x3A #define WI_AUX_OFFSET 0x3C #define WI_AUX_DATA 0x3E #define WI_AUX_PGSZ 128 #define WI_AUX_KEY0 0xfe01 #define WI_AUX_KEY1 0xdc23 #define WI_AUX_KEY2 0xba45 #define WI_COR 0x40 /* only for Symbol */ #define WI_COR_RESET 0x0080 #define WI_COR_IOMODE 0x0041 #define WI_HCR 0x42 /* only for Symbol */ #define WI_HCR_4WIRE 0x0010 #define WI_HCR_RUN 0x0007 #define WI_HCR_HOLD 0x000f #define WI_HCR_EEHOLD 0x00ce #define WI_COR_OFFSET 0x3e0 /* OK for PCI, default COR for Prism PC Card */ #define WI_COR_VALUE 0x41 /* * One form of communication with the Hermes is with what Lucent calls * LTV records, where LTV stands for Length, Type and Value. The length * and type are 16 bits and are in native byte order. The value is in * multiples of 16 bits and is in little endian byte order. */ struct wi_lt_hdr { u_int16_t wi_len; u_int16_t wi_type; /* value is vary depends on resource id */ }; /* * Download buffer location and length (0xFD01). */ struct wi_dnld_buf { u_int16_t wi_buf_pg; /* page addr of intermediate dl buf*/ u_int16_t wi_buf_off; /* offset of idb */ u_int16_t wi_buf_len; /* len of idb */ }; /* * Mem sizes (0xFD02). */ struct wi_memsz { u_int16_t wi_mem_ram; u_int16_t wi_mem_nvram; }; /* * NIC Identification (0xFD0B, 0xFD20) */ struct wi_ver { u_int16_t wi_ver[4]; }; /* define card ident */ #define WI_NIC_LUCENT_ID 0x0001 #define WI_NIC_LUCENT_STR "Lucent Technologies, WaveLAN/IEEE" #define WI_NIC_SONY_ID 0x0002 #define WI_NIC_SONY_STR "Sony WaveLAN/IEEE" #define WI_NIC_LUCENT_EMB_ID 0x0005 #define WI_NIC_LUCENT_EMB_STR "Lucent Embedded WaveLAN/IEEE" #define WI_NIC_EVB2_ID 0x8000 #define WI_NIC_EVB2_STR "RF:PRISM2 MAC:HFA3841" #define WI_NIC_HWB3763_ID 0x8001 #define WI_NIC_HWB3763_STR "RF:PRISM2 MAC:HFA3841 CARD:HWB3763 rev.B" #define WI_NIC_HWB3163_ID 0x8002 #define WI_NIC_HWB3163_STR "RF:PRISM2 MAC:HFA3841 CARD:HWB3163 rev.A" #define WI_NIC_HWB3163B_ID 0x8003 #define WI_NIC_HWB3163B_STR "RF:PRISM2 MAC:HFA3841 CARD:HWB3163 rev.B" #define WI_NIC_EVB3_ID 0x8004 #define WI_NIC_EVB3_STR "RF:PRISM2 MAC:HFA3842 CARD:HFA3842 EVAL" #define WI_NIC_HWB1153_ID 0x8007 #define WI_NIC_HWB1153_STR "RF:PRISM1 MAC:HFA3841 CARD:HWB1153" #define WI_NIC_P2_SST_ID 0x8008 /* Prism2 with SST flush */ #define WI_NIC_P2_SST_STR "RF:PRISM2 MAC:HFA3841 CARD:HWB3163-SST-flash" #define WI_NIC_EVB2_SST_ID 0x8009 #define WI_NIC_EVB2_SST_STR "RF:PRISM2 MAC:HFA3841 CARD:HWB3163-SST-flash" #define WI_NIC_3842_EVA_ID 0x800A /* 3842 Evaluation Board */ #define WI_NIC_3842_EVA_STR "RF:PRISM2 MAC:HFA3842 CARD:HFA3842 EVAL" #define WI_NIC_3842_PCMCIA_AMD_ID 0x800B /* Prism2.5 PCMCIA */ #define WI_NIC_3842_PCMCIA_SST_ID 0x800C #define WI_NIC_3842_PCMCIA_ATL_ID 0x800D #define WI_NIC_3842_PCMCIA_ATS_ID 0x800E #define WI_NIC_3842_PCMCIA_STR "RF:PRISM2.5 MAC:ISL3873" #define WI_NIC_3842_MINI_AMD_ID 0x8012 /* Prism2.5 Mini-PCI */ #define WI_NIC_3842_MINI_SST_ID 0x8013 #define WI_NIC_3842_MINI_ATL_ID 0x8014 #define WI_NIC_3842_MINI_ATS_ID 0x8015 #define WI_NIC_3842_MINI_STR "RF:PRISM2.5 MAC:ISL3874A(Mini-PCI)" #define WI_NIC_3842_PCI_AMD_ID 0x8016 /* Prism2.5 PCI-bridge */ #define WI_NIC_3842_PCI_SST_ID 0x8017 #define WI_NIC_3842_PCI_ATL_ID 0x8018 #define WI_NIC_3842_PCI_ATS_ID 0x8019 #define WI_NIC_3842_PCI_STR "RF:PRISM2.5 MAC:ISL3874A(PCI-bridge)" #define WI_NIC_P3_PCMCIA_AMD_ID 0x801A /* Prism3 PCMCIA */ #define WI_NIC_P3_PCMCIA_SST_ID 0x801B #define WI_NIC_P3_PCMCIA_ATL_ID 0x801C #define WI_NIC_P3_PCMCIA_ATS_ID 0x801D #define WI_NIC_P3_PCMCIA_STR "RF:PRISM3(PCMCIA)" #define WI_NIC_P3_USB_AMD_ID 0x801E #define WI_NIC_P3_USB_SST_ID 0x801F #define WI_NIC_P3_USB_ATL_ID 0x8020 #define WI_NIC_P3_MINI_AMD_ID 0x8021 /* Prism3 Mini-PCI */ #define WI_NIC_P3_MINI_SST_ID 0x8022 #define WI_NIC_P3_MINI_ATL_ID 0x8023 #define WI_NIC_P3_MINI_ATS_ID 0x8024 #define WI_NIC_P3_MINI_STR "RF:PRISM3(Mini-PCI)" /* * List of intended regulatory domains (0xFD11). */ struct wi_ltv_domains { u_int16_t wi_len; u_int16_t wi_type; u_int16_t wi_num_dom; u_int8_t wi_domains[10]; }; /* * CIS struct (0xFD13). */ struct wi_cis { u_int16_t wi_cis[240]; }; /* * Communications quality (0xFD43). */ struct wi_commqual { u_int16_t wi_coms_qual; u_int16_t wi_sig_lvl; u_int16_t wi_noise_lvl; }; /* * Actual system scale thresholds (0xFC06, 0xFD46). */ struct wi_scalethresh { u_int16_t wi_energy_detect; u_int16_t wi_carrier_detect; u_int16_t wi_defer; u_int16_t wi_cell_search; u_int16_t wi_out_of_range; u_int16_t wi_delta_snr; }; /* * PCF info struct (0xFD87). */ struct wi_pcf { u_int16_t wi_medium_occupancy_limit; u_int16_t wi_cfp_period; u_int16_t wi_cfp_max_duration; }; /* * Connection control characteristics. (0xFC00) * 0 == IBSS (802.11 compliant mode) (Only PRISM2) * 1 == Basic Service Set (BSS) * 2 == Wireless Distribudion System (WDS) * 3 == Pseudo IBSS * (Only PRISM2; not 802.11 compliant mode, testing use only) * 6 == HOST AP (Only PRISM2) */ #define WI_PORTTYPE_IBSS 0x0 #define WI_PORTTYPE_BSS 0x1 #define WI_PORTTYPE_WDS 0x2 #define WI_PORTTYPE_ADHOC 0x3 #define WI_PORTTYPE_APSILENT 0x5 #define WI_PORTTYPE_HOSTAP 0x6 /* * Mac addresses. (0xFC01, 0xFC08) */ struct wi_macaddr { u_int8_t wi_mac_addr[6]; }; /* * Station set identification (SSID). (0xFC02, 0xFC04) */ struct wi_ssid { u_int16_t wi_len; u_int8_t wi_ssid[32]; }; /* * Set our station name. (0xFC0E) */ struct wi_nodename { u_int16_t wi_nodelen; u_int8_t wi_nodename[32]; }; /* * Multicast addresses to be put in filter. We're * allowed up to 16 addresses in the filter. (0xFC80) */ struct wi_mcast { struct ether_addr wi_mcast[16]; }; /* * Join request. (0xFCE2) */ struct wi_joinreq { struct ether_addr wi_bssid; u_int16_t wi_chan; }; /* * supported rates. (0xFCB4) */ #define WI_SUPPRATES_1M 0x0001 #define WI_SUPPRATES_2M 0x0002 #define WI_SUPPRATES_5M 0x0004 #define WI_SUPPRATES_11M 0x0008 #define WI_RATES_BITS "\20\0011M\0022M\0035.5M\00411M" /* * Information frame types. */ #define WI_INFO_NOTIFY 0xF000 /* Handover address */ #define WI_INFO_COUNTERS 0xF100 /* Statistics counters */ #define WI_INFO_SCAN_RESULTS 0xF101 /* Scan results */ #define WI_INFO_HOST_SCAN_RESULTS 0xF104 /* Scan results */ #define WI_INFO_LINK_STAT 0xF200 /* Link status */ #define WI_INFO_LINK_STAT_CONNECTED 1 #define WI_INFO_LINK_STAT_DISCONNECTED 2 #define WI_INFO_LINK_STAT_AP_CHG 3 /* AP Change */ #define WI_INFO_LINK_STAT_AP_OOR 4 /* AP Out Of Range */ #define WI_INFO_LINK_STAT_AP_INR 5 /* AP In Range */ #define WI_INFO_LINK_STAT_ASSOC_FAILED 6 #define WI_INFO_ASSOC_STAT 0xF201 /* Association status */ #define WI_INFO_AUTH_REQUEST 0xF202 /* Authentication Request (AP) */ #define WI_INFO_POWERSAVE_COUNT 0xF203 /* PowerSave User Count (AP) */ struct wi_assoc { u_int16_t wi_assoc_stat; /* Association Status */ #define ASSOC 1 #define REASSOC 2 #define DISASSOC 3 #define ASSOCFAIL 4 #define AUTHFAIL 5 u_int8_t wi_assoc_sta[6]; /* Station Address */ u_int8_t wi_assoc_osta[6]; /* OLD Station Address */ u_int16_t wi_assoc_reason; /* Reason */ u_int16_t wi_assoc_reserve; /* Reserved */ }; /* * Scan Results of Prism2 chip */ struct wi_scan_header { u_int16_t wi_reserve; /* future use */ u_int16_t wi_reason; /* The reason this scan was initiated 1: Host initiated 2: Firmware initiated 3: Inquiry request from host */ }; struct wi_scan_data_p2 { u_int16_t wi_chid; /* BSS Channel ID from Probe Res.(PR)*/ u_int16_t wi_noise; /* Average Noise Level of the PR */ u_int16_t wi_signal; /* Signal Level on the PR */ u_int8_t wi_bssid[6]; /* MACaddress of BSS responder from PR */ u_int16_t wi_interval; /* BSS beacon interval */ u_int16_t wi_capinfo; /* BSS Capability Information IEEE Std 802.11(1997) ,see 7.3.1.4 */ u_int16_t wi_namelen; /* Length of SSID strings */ u_int8_t wi_name[32]; /* SSID strings */ u_int16_t wi_suprate[5]; /* Supported Rates element from the PR IEEE Std 802.11(1997) ,see 7.3.2.2 */ u_int16_t wi_rate; /* Data rate of the PR */ #define WI_APRATE_1 0x0A /* 1 Mbps */ #define WI_APRATE_2 0x14 /* 2 Mbps */ #define WI_APRATE_5 0x37 /* 5.5 Mbps */ #define WI_APRATE_11 0x6E /* 11 Mbps */ }; /* * Scan Results of Lucent chip */ struct wi_scan_data { u_int16_t wi_chid; /* BSS Channel ID from PR */ u_int16_t wi_noise; /* Average Noise Level of the PR */ u_int16_t wi_signal; /* Signal Level on the PR */ u_int8_t wi_bssid[6]; /* MACaddress of BSS responder from PR */ u_int16_t wi_interval; /* BSS beacon interval */ u_int16_t wi_capinfo; /* BSS Capability Information IEEE Std 802.11(1997) ,see 7.3.1.4 */ u_int16_t wi_namelen; /* Length of SSID strings */ u_int8_t wi_name[32]; /* SSID strings */ }; /* * transmit/receive frame structure */ struct wi_frame { u_int16_t wi_status; /* 0x00 */ u_int16_t wi_rx_tstamp1; /* 0x02 */ u_int16_t wi_rx_tstamp0; /* 0x04 */ u_int8_t wi_rx_silence; /* 0x06 */ u_int8_t wi_rx_signal; /* 0x07 */ u_int8_t wi_rx_rate; /* 0x08 */ u_int8_t wi_rx_flow; /* 0x09 */ u_int8_t wi_tx_rtry; /* 0x0a */ /* Prism2 AP Only */ u_int8_t wi_tx_rate; /* 0x0b */ /* Prism2 AP Only */ u_int16_t wi_tx_ctl; /* 0x0c */ struct ieee80211_frame_addr4 wi_whdr; /* 0x0e */ u_int16_t wi_dat_len; /* 0x2c */ struct ether_header wi_ehdr; /* 0x2e */ } __attribute__((__packed__)); /* Tx Status Field */ #define WI_TXSTAT_RET_ERR 0x0001 #define WI_TXSTAT_AGED_ERR 0x0002 #define WI_TXSTAT_DISCONNECT 0x0004 #define WI_TXSTAT_FORM_ERR 0x0008 /* Rx Status Field */ #define WI_STAT_BADCRC 0x0001 #define WI_STAT_UNDECRYPTABLE 0x0002 #define WI_STAT_ERRSTAT 0x0003 #define WI_STAT_MAC_PORT 0x0700 #define WI_STAT_PCF 0x1000 #define WI_RXSTAT_MSG_TYPE 0xE000 #define WI_STAT_1042 0x2000 /* RFC1042 encoded */ #define WI_STAT_TUNNEL 0x4000 /* Bridge-tunnel encoded */ #define WI_STAT_WMP_MSG 0x6000 /* WaveLAN-II management protocol */ #define WI_STAT_MGMT 0x8000 /* 802.11b management frames */ #define WI_ENC_TX_E_II 0x0E #define WI_ENC_TX_1042 0x00 #define WI_ENC_TX_TUNNEL 0xF8 /* TxControl Field (enhanced) */ #define WI_TXCNTL_TX_OK 0x0002 #define WI_TXCNTL_TX_EX 0x0004 #define WI_TXCNTL_STRUCT_TYPE 0x0018 #define WI_ENC_TX_802_3 0x00 #define WI_ENC_TX_802_11 0x08 #define WI_TXCNTL_ALTRTRY 0x0020 #define WI_TXCNTL_NOCRYPT 0x0080 /* * HFA3861/3863 (BBP) Control Registers */ #define WI_HFA386X_CR_A_D_TEST_MODES2 0x1A #define WI_HFA386X_CR_MANUAL_TX_POWER 0x3E #ifdef IEEE80211_RADIOTAP_F_CFP /* * Radio capture format for Prism. */ #define WI_RX_RADIOTAP_PRESENT \ ((1 << IEEE80211_RADIOTAP_TSFT) | \ (1 << IEEE80211_RADIOTAP_FLAGS) | \ (1 << IEEE80211_RADIOTAP_RATE) | \ (1 << IEEE80211_RADIOTAP_CHANNEL) | \ (1 << IEEE80211_RADIOTAP_DB_ANTSIGNAL) | \ (1 << IEEE80211_RADIOTAP_DB_ANTNOISE)) struct wi_rx_radiotap_header { struct ieee80211_radiotap_header wr_ihdr; u_int64_t wr_tsf; u_int8_t wr_flags; u_int8_t wr_rate; u_int16_t wr_chan_freq; u_int16_t wr_chan_flags; u_int8_t wr_antsignal; u_int8_t wr_antnoise; }; #define WI_TX_RADIOTAP_PRESENT \ ((1 << IEEE80211_RADIOTAP_FLAGS) | \ (1 << IEEE80211_RADIOTAP_RATE) | \ (1 << IEEE80211_RADIOTAP_CHANNEL)) struct wi_tx_radiotap_header { struct ieee80211_radiotap_header wt_ihdr; u_int8_t wt_flags; u_int8_t wt_rate; u_int16_t wt_chan_freq; u_int16_t wt_chan_flags; }; #endif /* IEEE80211_RADIOTAP_F_CFP */