# Updating Information for DragonFly users. # # # This file should warn you of any pitfalls which you might need to work around # when trying to update your DragonFly system. The information below is # in reverse-time order, with the latest information at the top. # # If you discover any problem, please contact the bugs@lists.dragonflybsd.org # mailing list with the details. +-----------------------------------------------------------------------+ + UPGRADING DRAGONFLY FROM 3.4 to later versions + +-----------------------------------------------------------------------+ CYRIX OPTIONS REMOVED --------------------- The following Cyrix related options have been removed: CPU_BTB_EN, CPU_CYRIX_NO_LOCK, CPU_DIRECT_MAPPED_CACHE, CPU_DISABLE_5X86_LSSER, CPU_FASTER_5X86_FPU, CPU_IORT, CPU_LOOP_EN, CPU_RSTK_EN, CPU_SUSP_HLT, CYRIX_CACHE_WORKS, and CYRIX_CACHE_REALLY_WORKS ISA SUPPORT REMOVED FROM RP(4) ------------------------------ ISA support has been removed from the rp(4) driver. It is now PCI only. +-----------------------------------------------------------------------+ + UPGRADING DRAGONFLY FROM 3.2 to later versions + +-----------------------------------------------------------------------+ COMPAT_SUNOS OPTION REMOVED --------------------------- The COMPAT_SUNOS option has been removed. It was meant to provide binary compatibility with SunOS 4.x for the sparc32 port of 4.4BSD. ISA SOUND CARD SUPPORT REMOVED ------------------------------ The following modules have been removed (all for ISA sound cards): snd_ad1816.ko, snd_ess.ko, snd_mss.ko, snd_sb8.ko, snd_sb16.ko, snd_sbc.ko GCC 4.7 ------- DragonFly has switched base compilers. GCC 4.7 is now the default compiler and GCC 4.4 is the alternative compiler. The "NO_GCC47" make variable ceases to work now. Users who wish to build only GCC 4.7 have to use NO_GCC44 in the /etc/make.conf to prohibit GCC 4.4 from building. However, using it is highly discouraged. There are a few packages in pkgsrc that do not build with GCC 4.7 and the new "DPorts" system uses GCC 4.4 by default. At this time, it is recommended to keep both compilers on the base system. SMP OPTION REMOVED ------------------ The SMP kernel option has been made a no-op. All kernels now feature SMP support. If you have 'options SMP' in your kernel config, you can as well remove it. DEVICE_POLLING OPTION REPLACED BY IFPOLL_ENABLE OPTION, KTR_POLLING REMOVED --------------------------------------------------------------------------- The DEVICE_POLLING kernel option has been made a no-op and it has been replaced by IFPOLL_ENABLE. If you have 'options DEVICE_POLLING' in your kernel config, you need to change it to IFPOLL_ENABLE. Also, the KTR_POLLING kernel option has been removed, so it must be removed from kernel configs that have it. BUSLOGIC, CYCLADES AND STALLION ISA SUPPORT REMOVED --------------------------------------------------- The bt(4) driver for Buslogic SCSI adapters has been made PCI only. ISA cards will no longer be detected. The same has been done for Stallion multiport serial controllers. stli(4) has been completely removed (along with the stlload(8) and stlstty(8) utilities) and stl(4) was changed to support only PCI cards. Similarly, ISA support was removed from cy(4) too. All these drivers are i386 only. COMPAT_OLDISA OPTION GONE ------------------------- The i386 specific COMPAT_OLDISA kernel option has been removed, since nothing needs it anymore. +-----------------------------------------------------------------------+ + UPGRADING DRAGONFLY FROM 3.0 to later versions + +-----------------------------------------------------------------------+ APIC_IO OPTION REMOVED ---------------------- The APIC_IO kernel option is no longer accepted after having been without effect for a while. The hw.ioapic_enable tunable now serves its purpose. If you have 'options APIC_IO' in your kernel config, you'll have to remove it. WATCHDOG_ENABLE & HW_WDOG OPTIONS REMOVED ----------------------------------------- The wdog framework is now compiled into our kernels by default, so the options are no longer needed. DOSCMD(1) REMOVED ----------------- doscmd(1) has been removed. It was i386 only. The doscmd(1) specific NO_X make.conf option was removed too. GCC 4.7 ------- GCC 4.7 has been brought in and replaces GCC 4.1 as DragonFly's non- default compiler in base (default is still GCC 4.4). Users who wish to build only GCC 4.4 have to replace NO_GCC41 with NO_GCC47 in /etc/make.conf. USB4BSD ------- A new USB stack (from FreeBSD) has been brought in. The following modules have been ported so far: usb, uhci, ohci, ehci, xhci, umass, usfs, uether, if_axe, if_udav, ukbd, ums, uep, uhid, usb_quirk, and uaudio. It is not yet the default. To activate it, WANT_USB4BSD=yes has to be put in make.conf and device "usb4bsd" (quotes needed) has to replace device usb in the kernel config. After that, a full build/install/upgrade cycle is needed. Note that this is experimental and incomplete, but we are interested in hearing about issues with it, of course. ISA SUPPORT REMOVED FROM AIC-6260/6360 DRIVER --------------------------------------------- ISA adapter support was dropped from the aic(4) driver. +-----------------------------------------------------------------------+ + UPGRADING DRAGONFLY FROM 2.10 to later versions + +-----------------------------------------------------------------------+ SEVERAL ISA DRIVERS REMOVED --------------------------- The following ISA only drivers have been removed along with a couple of associated userland tools: aha(4) asc(4) & sasc(1) ctx dgb(4) el(4) gpib gsc(4) & sgsc(1) ie(4) labpc(4) le(4) mse(4) rc(4) rdp(4) spigot tw(4) & xten(1) & xtend(8) wl(4) & wlconfig(8) wt(4) Note that two of these drivers (aha(4) and ie(4)) are in our GENERIC config and one (aha(4)) is in our X86_64_GENERIC kernel configuration file. If buildkernel complains about any of these drivers, just remove them from your kernel configuration. BINUTILS 2.20 ------------- Binutils 2.20 has been removed in favor of Binutils 2.22. The accepted values of BINUTILSVERS are now binutils221 and binutils222 (default). BUILDWORLD/-KERNEL PARALLELIZATION WORK --------------------------------------- Due to changes in the way we build with more than one make job, you will have to update install(1) and mkdir(1) prior to buildworld if you want to build with 'make -j': cd /usr/src/usr.bin/xinstall; make; make install; make clean cd /usr/src/bin/mkdir; make; make install; make clean DMA(8) UPGRADE -------------- dma(8) has been upgraded to v0.7 which no longer supports the /etc/dma/virtusertable. Some of its functionality has been replaced with the MASQUERADE keyword and the EMAIL environment variable (see the dma(8) manual page). +-----------------------------------------------------------------------+ + UPGRADING DRAGONFLY FROM 2.8 to later versions + +-----------------------------------------------------------------------+ GCC 4.4 & BINUTILS 2.21 ----------------------- GCC 4.4 has been made DragonFly's default compiler and Binutils 2.21 has been made DragonFly's default Binutils. That means that any settings that set CCVER to 'gcc44' are not needed anymore. Instead, CCVER can be set to 'gcc41' to go back to using GCC 4.1. It also means that 'binutils221' as a value for BINUTILSVER has no effect anymore. 2.17 has been removed and 'binutils220' is available as an option. The NO_GCC44 option has been removed and will not affect the build anymore. There is now a NO_GCC41 option that will prevent GCC 4.1 from building in a similar fashion. Note that you must do a full buildworld/buildkernel for upgrading. pkg_radd settings ----------------- The config file for pkg_radd has moved from /etc/settings.conf to /etc/pkg_radd.conf. Save the contents of settings.conf before upgrading if this is needed. This warning only applies if /etc/settings.conf exists. pkg_radd will continue to work with defaults. +-----------------------------------------------------------------------+ + 20100927 + + UPGRADING DRAGONFLY FROM 2.6 to 2.8 or HEAD + +-----------------------------------------------------------------------+ OpenSSL -------- OpenSSL has been upgraded, and SHLIB_MAJOR was bumped for libssh and libcrypto. This shouldn't break any 3rd-party software, but you'll need to recompile your 3rd-party software if you want it to link against the new version of OpenSSL. Loader ------- A new loader (dloader) has been added which better handles booting from multiple kernel/module versions. To upgrade (Only for this upgrade, for post 2.8 upgrades see GENERAL below) cd /usr/src make buildworld make installworld make upgrade make buildkernel KERNCONF= make installkernel KERNCONF= Note that you must installworld and run the 'upgrade' target before installing the new kernel. BIND ----- BIND has been removed from the base system. The ldns and drill tools have been added for basic functionality. Use 'drill' where you would normally use nslookup or dig, or install BIND from pkgsrc. It's available as net/bind95, net/bind96, or net/bind97 as of this writing. This only affects older systems upgrading to 2.8. New 2.8+ installs include BIND as a pkgsrc package. +-----------------------------------------------------------------------+ + UPGRADING DRAGONFLY ON AN EXISTING DRAGONFLY SYSTEM + + GENERAL + +-----------------------------------------------------------------------+ Instructions on how to obtain and maintain DragonFly source code using git are in the development(7) manual page. To upgrade a DragonFly system from sources you run the following sequence: cd /usr/src make buildworld make buildkernel KERNCONF= make installkernel KERNCONF= make installworld You will also want to run the 'upgrade' target to upgrade your /etc and the rest of your system. The upgrade target is aware of stale files created by older DragonFly installations and should delete them automatically. make upgrade See the build(7) manual page for further information. Once you've done a full build of the world and kernel you can do incremental upgrades of either by using the 'quickworld' and 'quickkernel' targets instead of 'buildworld' and 'buildkernel'. If you have any problems with the quick targets, try updating your repo first, and then a full buildworld and buildkernel as shown above, before asking for help. +-----------------------------------------------------------------------+ + UPGRADING FROM DRAGONFLY <= 2.0 TO DRAGONFLY >= 2.1 + +-----------------------------------------------------------------------+ In 2.1 kernel and modules has moved to boot directory. For most cases this is handled automatically by 'make upgrade'. A few cases needs manual intervention: * When installing a kernel without first doing a make buildworld, installworld and upgrade to the same DESTDIR as kernel: make DESTDIR/boot directory and move kernel and modules into this boot directory; also move kernel.old and modules.old. Typical example is vkernel(7), use (no modules used): cd /var/vkernel mkdir boot chflags noschg kernel mv kernel kernel.old boot chflags schg boot/kernel * When using a boot-only partition, /boot/loader.rc needs to be edited: delete occurrences of '/boot/'. These occurences can normally be deleted in any case, see loader(8). +-----------------------------------------------------------------------+ + UPGRADING FROM DRAGONFLY <= 1.8 TO DRAGONFLY >= 1.9 + +-----------------------------------------------------------------------+ In 1.9 major changes to the disk management infrastructure have taken place. make upgrade may not catch all of your disk devices in /dev, so after upgrading be sure to cd /dev; ./MAKEDEV where are all of your disk devices. HOWEVER, from late 2.3 on we run devfs and MAKEDEV no longer exists. The biggest changes in 1.9 are: (1) That whole-slice devices such as da0s1 no longer share the same device id as partition c devices such as da0s1c. (2) The whole-disk device (e.g. da0) is full raw access to the disk, with no snooping or reserved sectors. Consequently you cannot run disklabel on this device. Instead you must run disklabel on a whole-slice device. (3) The 'compatibility' partitions now use slice 0 in the device name, so instead of da0a you must specify da0s0a. Also, as per (1) above, accessing the disklabel for the compatibility partitions must be done via slice 0 (da0s0). (4) Many device drivers that used to fake up labels, such as CD, ACD, VN, and CCD now run through the disk management layer and are assigned real disk management devices. VN and CCD in particular do not usually use a MBR and disklabels must be accessed through the compatibility slice 0. Your /etc/ccd.conf file still specifies 'ccd0', though, you don't name it 'ccd0s0' in the config file. Generally speaking, you have to get used to running fdisk and disklabel on the correctly specified device names. A lot of the wiggle, such as running disklabel on a partition, has been removed. +-----------------------------------------------------------------------+ + UPGRADING FROM OLDER VERSIONS OF DRAGONFLY OR FREEBSD + +-----------------------------------------------------------------------+ > Kerberos IV ------------- Kerberos IV (eBones) was removed from the tree, please consider moving to Kerberos 5 (Heimdal). > Package Management System --------------------------- Starting with the 1.4 release, DragonFly uses NetBSD's pkgsrc package management system. The necessary tools to build and maintain packages are provided in /usr/pkg/bin and /usr/pkg/sbin. Make sure that these directories are in your PATH variable. In order to obtain a reasonably current snapshot of the pkgsrc tree, use the tarball from NetBSD: fetch -o /tmp/pkgsrc.tar.gz ftp://ftp.NetBSD.org/pub/NetBSD/packages/pkgsrc.tar.gz cd /usr; tar -xzf /tmp/pkgsrc.tar.gz; chown -R root:wheel pkgsrc This tree can then be kept up to date with cvs update: cd /usr/pkgsrc; cvs up NOTE! If you upgraded from a pre-1.4 system to 1.4 or later, you need to build and install the pkgsrc bootstrap manually: cd /usr/pkgsrc/bootstrap ./bootstrap --pkgdbdir /var/db/pkg --prefix /usr/pkg +-----------------------------------------------------------------------+ + UPGRADING DRAGONFLY ON AN EXISTING DRAGONFLY SYSTEM + + UPDATING FROM PRE-1.2 SYSTEMS OR FreeBSD 4.x TO + + DRAGONFLY 1.3+ (EITHER PREVIEW or HEAD) + +-----------------------------------------------------------------------+ The compatibility shims for the build environment have been removed, you have to update to DragonFly 1.2 release branch first. The default PAM configuration has moved from /etc/pam.conf to /etc/pam.d/. The existing configuration can be converted using /etc/pam.d/convert.sh. Entries in /etc/pam.d/ override entries in /etc/pam.conf. In addition the pam_skey.so module was retired, you have to remove it manually from your configuration, when you convert it. > Required user and group IDs when upgrading from either FreeBSD or DragonFly --------------------- The following users may be missing from your password file. Use vipw and add any that are missing: smmsp:*:25:25::0:0:Sendmail Submission User:/var/spool/clientmqueue:/sbin/nologin _pflogd:*:64:64::0:0:pflogd privsep user:/var/empty:/sbin/nologin The following groups may be missing from your group file. Use vi /etc/group and add any that are missing: smmsp:*:25: authpf:*:63: _pflogd:*:64: > Upgrading to DragonFly from FreeBSD --------------------- You can build the DragonFly world and DragonFly kernels on a FreeBSD-4.x or FreeBSD-5.x machine and then install DragonFly over FreeBSD, replacing FreeBSD. Note that the DragonFly buildworld target does not try to reuse make depend information, it starts from scratch, so no pre-cleaning of the object hierarchy is necessary. # get the CVS repository (it is placed in /home/dcvs, 500MB). # Please use the -h option and a mirror site to pull the # initial repository, but feel free to use the main repository # machine to pull updates. cvsup /usr/share/examples/cvsup/DragonFly-cvs-supfile # install the source from the CVS hierarchy (remove preexisting # FreeBSD src first) (500MB) cd /usr rm -rf src cvs -R -d /home/dcvs checkout -P src # build it (500MB used in /usr/obj) # cd /usr/src make buildworld make buildkernel KERNCONF= Once you have built DragonFly you have to install it over FreeBSD. Since DragonFly does not track changes made by FreeBSD to its include file hierarchy and include file pollution can cause all sorts of unexpected compilation issues to come up, it is best to wipe your include hierarchy prior to installing DragonFly. Note that you should not wipe any installed FreeBSD header files or binaries until after you have successfully completed the build steps above. rm -rf /usr/include mkdir /usr/include make installkernel KERNCONF= make installworld Then you need to upgrade your system. DragonFly's 'make upgrade' target will unconditionally upgrade the /etc files that sysops do not usually mess around with, such as the files in /etc/rc.d. It will also remove any obsolete files such as utilities and manpages that have been removed from the system since the version you're coming from. If you are unsure we recommend that you make a backup of at least your /etc before applying this step. Note that DragonFly's RC system is basically RCNG from FreeBSD-5, but there are some differences in the contents of the RC files. make upgrade NOTE! Never do a 'make upgrade' before 'make installworld' has been run. Doing so might leave your system in an unusable state. Finally we recommend that you do an 'ls -lta BLAH' for /bin, /sbin, /usr/bin, /usr/bin, and /usr/lib, and remove any stale files that you find. Please report these files to the DragonFly developers so that they can be added to the 'upgrade' target.