/*- * Copyright (c) 1992 Keith Muller. * Copyright (c) 1992, 1993 * The Regents of the University of California. All rights reserved. * * This code is derived from software contributed to Berkeley by * Keith Muller of the University of California, San Diego. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the University of * California, Berkeley and its contributors. * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * @(#)tables.c 8.1 (Berkeley) 5/31/93 * $FreeBSD: src/bin/pax/tables.c,v 1.13.2.1 2001/08/01 05:03:12 obrien Exp $ * $DragonFly: src/bin/pax/tables.c,v 1.4 2003/09/28 14:39:14 hmp Exp $ */ #include #include #include #include #include #include #include #include #include #include "pax.h" #include "tables.h" #include "extern.h" /* * Routines for controlling the contents of all the different databases pax * keeps. Tables are dynamically created only when they are needed. The * goal was speed and the ability to work with HUGE archives. The databases * were kept simple, but do have complex rules for when the contents change. * As of this writing, the POSIX library functions were more complex than * needed for this application (pax databases have very short lifetimes and * do not survive after pax is finished). Pax is required to handle very * large archives. These database routines carefully combine memory usage and * temporary file storage in ways which will not significantly impact runtime * performance while allowing the largest possible archives to be handled. * Trying to force the fit to the POSIX databases routines was not considered * time well spent. */ static HRDLNK **ltab = NULL; /* hard link table for detecting hard links */ static FTM **ftab = NULL; /* file time table for updating arch */ static NAMT **ntab = NULL; /* interactive rename storage table */ static DEVT **dtab = NULL; /* device/inode mapping tables */ static ATDIR **atab = NULL; /* file tree directory time reset table */ static int dirfd = -1; /* storage for setting created dir time/mode */ static u_long dircnt; /* entries in dir time/mode storage */ static int ffd = -1; /* tmp file for file time table name storage */ static DEVT *chk_dev (dev_t, int); /* * hard link table routines * * The hard link table tries to detect hard links to files using the device and * inode values. We do this when writing an archive, so we can tell the format * write routine that this file is a hard link to another file. The format * write routine then can store this file in whatever way it wants (as a hard * link if the format supports that like tar, or ignore this info like cpio). * (Actually a field in the format driver table tells us if the format wants * hard link info. if not, we do not waste time looking for them). We also use * the same table when reading an archive. In that situation, this table is * used by the format read routine to detect hard links from stored dev and * inode numbers (like cpio). This will allow pax to create a link when one * can be detected by the archive format. */ /* * lnk_start * Creates the hard link table. * Return: * 0 if created, -1 if failure */ int lnk_start(void) { if (ltab != NULL) return(0); if ((ltab = (HRDLNK **)calloc(L_TAB_SZ, sizeof(HRDLNK *))) == NULL) { paxwarn(1, "Cannot allocate memory for hard link table"); return(-1); } return(0); } /* * chk_lnk() * Looks up entry in hard link hash table. If found, it copies the name * of the file it is linked to (we already saw that file) into ln_name. * lnkcnt is decremented and if goes to 1 the node is deleted from the * database. (We have seen all the links to this file). If not found, * we add the file to the database if it has the potential for having * hard links to other files we may process (it has a link count > 1) * Return: * if found returns 1; if not found returns 0; -1 on error */ int chk_lnk(register ARCHD *arcn) { register HRDLNK *pt; register HRDLNK **ppt; register u_int indx; if (ltab == NULL) return(-1); /* * ignore those nodes that cannot have hard links */ if ((arcn->type == PAX_DIR) || (arcn->sb.st_nlink <= 1)) return(0); /* * hash inode number and look for this file */ indx = ((unsigned)arcn->sb.st_ino) % L_TAB_SZ; if ((pt = ltab[indx]) != NULL) { /* * it's hash chain in not empty, walk down looking for it */ ppt = &(ltab[indx]); while (pt != NULL) { if ((pt->ino == arcn->sb.st_ino) && (pt->dev == arcn->sb.st_dev)) break; ppt = &(pt->fow); pt = pt->fow; } if (pt != NULL) { /* * found a link. set the node type and copy in the * name of the file it is to link to. we need to * handle hardlinks to regular files differently than * other links. */ arcn->ln_nlen = l_strncpy(arcn->ln_name, pt->name, sizeof(arcn->ln_name) - 1); arcn->ln_name[arcn->ln_nlen] = '\0'; if (arcn->type == PAX_REG) arcn->type = PAX_HRG; else arcn->type = PAX_HLK; /* * if we have found all the links to this file, remove * it from the database */ if (--pt->nlink <= 1) { *ppt = pt->fow; (void)free((char *)pt->name); (void)free((char *)pt); } return(1); } } /* * we never saw this file before. It has links so we add it to the * front of this hash chain */ if ((pt = (HRDLNK *)malloc(sizeof(HRDLNK))) != NULL) { if ((pt->name = strdup(arcn->name)) != NULL) { pt->dev = arcn->sb.st_dev; pt->ino = arcn->sb.st_ino; pt->nlink = arcn->sb.st_nlink; pt->fow = ltab[indx]; ltab[indx] = pt; return(0); } (void)free((char *)pt); } paxwarn(1, "Hard link table out of memory"); return(-1); } /* * purg_lnk * remove reference for a file that we may have added to the data base as * a potential source for hard links. We ended up not using the file, so * we do not want to accidently point another file at it later on. */ void purg_lnk(register ARCHD *arcn) { register HRDLNK *pt; register HRDLNK **ppt; register u_int indx; if (ltab == NULL) return; /* * do not bother to look if it could not be in the database */ if ((arcn->sb.st_nlink <= 1) || (arcn->type == PAX_DIR) || (arcn->type == PAX_HLK) || (arcn->type == PAX_HRG)) return; /* * find the hash chain for this inode value, if empty return */ indx = ((unsigned)arcn->sb.st_ino) % L_TAB_SZ; if ((pt = ltab[indx]) == NULL) return; /* * walk down the list looking for the inode/dev pair, unlink and * free if found */ ppt = &(ltab[indx]); while (pt != NULL) { if ((pt->ino == arcn->sb.st_ino) && (pt->dev == arcn->sb.st_dev)) break; ppt = &(pt->fow); pt = pt->fow; } if (pt == NULL) return; /* * remove and free it */ *ppt = pt->fow; (void)free((char *)pt->name); (void)free((char *)pt); } /* * lnk_end() * pull apart a existing link table so we can reuse it. We do this between * read and write phases of append with update. (The format may have * used the link table, and we need to start with a fresh table for the * write phase */ void lnk_end(void) { register int i; register HRDLNK *pt; register HRDLNK *ppt; if (ltab == NULL) return; for (i = 0; i < L_TAB_SZ; ++i) { if (ltab[i] == NULL) continue; pt = ltab[i]; ltab[i] = NULL; /* * free up each entry on this chain */ while (pt != NULL) { ppt = pt; pt = ppt->fow; (void)free((char *)ppt->name); (void)free((char *)ppt); } } return; } /* * modification time table routines * * The modification time table keeps track of last modification times for all * files stored in an archive during a write phase when -u is set. We only * add a file to the archive if it is newer than a file with the same name * already stored on the archive (if there is no other file with the same * name on the archive it is added). This applies to writes and appends. * An append with an -u must read the archive and store the modification time * for every file on that archive before starting the write phase. It is clear * that this is one HUGE database. To save memory space, the actual file names * are stored in a scatch file and indexed by an in memory hash table. The * hash table is indexed by hashing the file path. The nodes in the table store * the length of the filename and the lseek offset within the scratch file * where the actual name is stored. Since there are never any deletions to this * table, fragmentation of the scratch file is never a issue. Lookups seem to * not exhibit any locality at all (files in the database are rarely * looked up more than once...). So caching is just a waste of memory. The * only limitation is the amount of scatch file space available to store the * path names. */ /* * ftime_start() * create the file time hash table and open for read/write the scratch * file. (after created it is unlinked, so when we exit we leave * no witnesses). * Return: * 0 if the table and file was created ok, -1 otherwise */ int ftime_start(void) { if (ftab != NULL) return(0); if ((ftab = (FTM **)calloc(F_TAB_SZ, sizeof(FTM *))) == NULL) { paxwarn(1, "Cannot allocate memory for file time table"); return(-1); } /* * get random name and create temporary scratch file, unlink name * so it will get removed on exit */ memcpy(tempbase, _TFILE_BASE, sizeof(_TFILE_BASE)); if ((ffd = mkstemp(tempfile)) < 0) { syswarn(1, errno, "Unable to create temporary file: %s", tempfile); return(-1); } (void)unlink(tempfile); return(0); } /* * chk_ftime() * looks up entry in file time hash table. If not found, the file is * added to the hash table and the file named stored in the scratch file. * If a file with the same name is found, the file times are compared and * the most recent file time is retained. If the new file was younger (or * was not in the database) the new file is selected for storage. * Return: * 0 if file should be added to the archive, 1 if it should be skipped, * -1 on error */ int chk_ftime(register ARCHD *arcn) { register FTM *pt; register int namelen; register u_int indx; char ckname[PAXPATHLEN+1]; /* * no info, go ahead and add to archive */ if (ftab == NULL) return(0); /* * hash the pathname and look up in table */ namelen = arcn->nlen; indx = st_hash(arcn->name, namelen, F_TAB_SZ); if ((pt = ftab[indx]) != NULL) { /* * the hash chain is not empty, walk down looking for match * only read up the path names if the lengths match, speeds * up the search a lot */ while (pt != NULL) { if (pt->namelen == namelen) { /* * potential match, have to read the name * from the scratch file. */ if (lseek(ffd,pt->seek,SEEK_SET) != pt->seek) { syswarn(1, errno, "Failed ftime table seek"); return(-1); } if (read(ffd, ckname, namelen) != namelen) { syswarn(1, errno, "Failed ftime table read"); return(-1); } /* * if the names match, we are done */ if (!strncmp(ckname, arcn->name, namelen)) break; } /* * try the next entry on the chain */ pt = pt->fow; } if (pt != NULL) { /* * found the file, compare the times, save the newer */ if (arcn->sb.st_mtime > pt->mtime) { /* * file is newer */ pt->mtime = arcn->sb.st_mtime; return(0); } /* * file is older */ return(1); } } /* * not in table, add it */ if ((pt = (FTM *)malloc(sizeof(FTM))) != NULL) { /* * add the name at the end of the scratch file, saving the * offset. add the file to the head of the hash chain */ if ((pt->seek = lseek(ffd, (off_t)0, SEEK_END)) >= 0) { if (write(ffd, arcn->name, namelen) == namelen) { pt->mtime = arcn->sb.st_mtime; pt->namelen = namelen; pt->fow = ftab[indx]; ftab[indx] = pt; return(0); } syswarn(1, errno, "Failed write to file time table"); } else syswarn(1, errno, "Failed seek on file time table"); } else paxwarn(1, "File time table ran out of memory"); if (pt != NULL) (void)free((char *)pt); return(-1); } /* * Interactive rename table routines * * The interactive rename table keeps track of the new names that the user * assigns to files from tty input. Since this map is unique for each file * we must store it in case there is a reference to the file later in archive * (a link). Otherwise we will be unable to find the file we know was * extracted. The remapping of these files is stored in a memory based hash * table (it is assumed since input must come from /dev/tty, it is unlikely to * be a very large table). */ /* * name_start() * create the interactive rename table * Return: * 0 if successful, -1 otherwise */ int name_start(void) { if (ntab != NULL) return(0); if ((ntab = (NAMT **)calloc(N_TAB_SZ, sizeof(NAMT *))) == NULL) { paxwarn(1, "Cannot allocate memory for interactive rename table"); return(-1); } return(0); } /* * add_name() * add the new name to old name mapping just created by the user. * If an old name mapping is found (there may be duplicate names on an * archive) only the most recent is kept. * Return: * 0 if added, -1 otherwise */ int add_name(register char *oname, int onamelen, char *nname) { register NAMT *pt; register u_int indx; if (ntab == NULL) { /* * should never happen */ paxwarn(0, "No interactive rename table, links may fail\n"); return(0); } /* * look to see if we have already mapped this file, if so we * will update it */ indx = st_hash(oname, onamelen, N_TAB_SZ); if ((pt = ntab[indx]) != NULL) { /* * look down the has chain for the file */ while ((pt != NULL) && (strcmp(oname, pt->oname) != 0)) pt = pt->fow; if (pt != NULL) { /* * found an old mapping, replace it with the new one * the user just input (if it is different) */ if (strcmp(nname, pt->nname) == 0) return(0); (void)free((char *)pt->nname); if ((pt->nname = strdup(nname)) == NULL) { paxwarn(1, "Cannot update rename table"); return(-1); } return(0); } } /* * this is a new mapping, add it to the table */ if ((pt = (NAMT *)malloc(sizeof(NAMT))) != NULL) { if ((pt->oname = strdup(oname)) != NULL) { if ((pt->nname = strdup(nname)) != NULL) { pt->fow = ntab[indx]; ntab[indx] = pt; return(0); } (void)free((char *)pt->oname); } (void)free((char *)pt); } paxwarn(1, "Interactive rename table out of memory"); return(-1); } /* * sub_name() * look up a link name to see if it points at a file that has been * remapped by the user. If found, the link is adjusted to contain the * new name (oname is the link to name) */ void sub_name(register char *oname, int *onamelen, size_t onamesize) { register NAMT *pt; register u_int indx; if (ntab == NULL) return; /* * look the name up in the hash table */ indx = st_hash(oname, *onamelen, N_TAB_SZ); if ((pt = ntab[indx]) == NULL) return; while (pt != NULL) { /* * walk down the hash chain looking for a match */ if (strcmp(oname, pt->oname) == 0) { /* * found it, replace it with the new name * and return (we know that oname has enough space) */ *onamelen = l_strncpy(oname, pt->nname, onamesize - 1); oname[*onamelen] = '\0'; return; } pt = pt->fow; } /* * no match, just return */ return; } /* * device/inode mapping table routines * (used with formats that store device and inodes fields) * * device/inode mapping tables remap the device field in a archive header. The * device/inode fields are used to determine when files are hard links to each * other. However these values have very little meaning outside of that. This * database is used to solve one of two different problems. * * 1) when files are appended to an archive, while the new files may have hard * links to each other, you cannot determine if they have hard links to any * file already stored on the archive from a prior run of pax. We must assume * that these inode/device pairs are unique only within a SINGLE run of pax * (which adds a set of files to an archive). So we have to make sure the * inode/dev pairs we add each time are always unique. We do this by observing * while the inode field is very dense, the use of the dev field is fairly * sparse. Within each run of pax, we remap any device number of a new archive * member that has a device number used in a prior run and already stored in a * file on the archive. During the read phase of the append, we store the * device numbers used and mark them to not be used by any file during the * write phase. If during write we go to use one of those old device numbers, * we remap it to a new value. * * 2) Often the fields in the archive header used to store these values are * too small to store the entire value. The result is an inode or device value * which can be truncated. This really can foul up an archive. With truncation * we end up creating links between files that are really not links (after * truncation the inodes are the same value). We address that by detecting * truncation and forcing a remap of the device field to split truncated * inodes away from each other. Each truncation creates a pattern of bits that * are removed. We use this pattern of truncated bits to partition the inodes * on a single device to many different devices (each one represented by the * truncated bit pattern). All inodes on the same device that have the same * truncation pattern are mapped to the same new device. Two inodes that * truncate to the same value clearly will always have different truncation * bit patterns, so they will be split from away each other. When we spot * device truncation we remap the device number to a non truncated value. * (for more info see table.h for the data structures involved). */ /* * dev_start() * create the device mapping table * Return: * 0 if successful, -1 otherwise */ int dev_start(void) { if (dtab != NULL) return(0); if ((dtab = (DEVT **)calloc(D_TAB_SZ, sizeof(DEVT *))) == NULL) { paxwarn(1, "Cannot allocate memory for device mapping table"); return(-1); } return(0); } /* * add_dev() * add a device number to the table. this will force the device to be * remapped to a new value if it be used during a write phase. This * function is called during the read phase of an append to prohibit the * use of any device number already in the archive. * Return: * 0 if added ok, -1 otherwise */ int add_dev(register ARCHD *arcn) { if (chk_dev(arcn->sb.st_dev, 1) == NULL) return(-1); return(0); } /* * chk_dev() * check for a device value in the device table. If not found and the add * flag is set, it is added. This does NOT assign any mapping values, just * adds the device number as one that need to be remapped. If this device * is already mapped, just return with a pointer to that entry. * Return: * pointer to the entry for this device in the device map table. Null * if the add flag is not set and the device is not in the table (it is * not been seen yet). If add is set and the device cannot be added, null * is returned (indicates an error). */ static DEVT * chk_dev(dev_t dev, int add) { register DEVT *pt; register u_int indx; if (dtab == NULL) return(NULL); /* * look to see if this device is already in the table */ indx = ((unsigned)dev) % D_TAB_SZ; if ((pt = dtab[indx]) != NULL) { while ((pt != NULL) && (pt->dev != dev)) pt = pt->fow; /* * found it, return a pointer to it */ if (pt != NULL) return(pt); } /* * not in table, we add it only if told to as this may just be a check * to see if a device number is being used. */ if (add == 0) return(NULL); /* * allocate a node for this device and add it to the front of the hash * chain. Note we do not assign remaps values here, so the pt->list * list must be NULL. */ if ((pt = (DEVT *)malloc(sizeof(DEVT))) == NULL) { paxwarn(1, "Device map table out of memory"); return(NULL); } pt->dev = dev; pt->list = NULL; pt->fow = dtab[indx]; dtab[indx] = pt; return(pt); } /* * map_dev() * given an inode and device storage mask (the mask has a 1 for each bit * the archive format is able to store in a header), we check for inode * and device truncation and remap the device as required. Device mapping * can also occur when during the read phase of append a device number was * seen (and was marked as do not use during the write phase). WE ASSUME * that unsigned longs are the same size or bigger than the fields used * for ino_t and dev_t. If not the types will have to be changed. * Return: * 0 if all ok, -1 otherwise. */ int map_dev(register ARCHD *arcn, u_long dev_mask, u_long ino_mask) { register DEVT *pt; register DLIST *dpt; static dev_t lastdev = 0; /* next device number to try */ int trc_ino = 0; int trc_dev = 0; ino_t trunc_bits = 0; ino_t nino; if (dtab == NULL) return(0); /* * check for device and inode truncation, and extract the truncated * bit pattern. */ if ((arcn->sb.st_dev & (dev_t)dev_mask) != arcn->sb.st_dev) ++trc_dev; if ((nino = arcn->sb.st_ino & (ino_t)ino_mask) != arcn->sb.st_ino) { ++trc_ino; trunc_bits = arcn->sb.st_ino & (ino_t)(~ino_mask); } /* * see if this device is already being mapped, look up the device * then find the truncation bit pattern which applies */ if ((pt = chk_dev(arcn->sb.st_dev, 0)) != NULL) { /* * this device is already marked to be remapped */ for (dpt = pt->list; dpt != NULL; dpt = dpt->fow) if (dpt->trunc_bits == trunc_bits) break; if (dpt != NULL) { /* * we are being remapped for this device and pattern * change the device number to be stored and return */ arcn->sb.st_dev = dpt->dev; arcn->sb.st_ino = nino; return(0); } } else { /* * this device is not being remapped YET. if we do not have any * form of truncation, we do not need a remap */ if (!trc_ino && !trc_dev) return(0); /* * we have truncation, have to add this as a device to remap */ if ((pt = chk_dev(arcn->sb.st_dev, 1)) == NULL) goto bad; /* * if we just have a truncated inode, we have to make sure that * all future inodes that do not truncate (they have the * truncation pattern of all 0's) continue to map to the same * device number. We probably have already written inodes with * this device number to the archive with the truncation * pattern of all 0's. So we add the mapping for all 0's to the * same device number. */ if (!trc_dev && (trunc_bits != 0)) { if ((dpt = (DLIST *)malloc(sizeof(DLIST))) == NULL) goto bad; dpt->trunc_bits = 0; dpt->dev = arcn->sb.st_dev; dpt->fow = pt->list; pt->list = dpt; } } /* * look for a device number not being used. We must watch for wrap * around on lastdev (so we do not get stuck looking forever!) */ while (++lastdev > 0) { if (chk_dev(lastdev, 0) != NULL) continue; /* * found an unused value. If we have reached truncation point * for this format we are hosed, so we give up. Otherwise we * mark it as being used. */ if (((lastdev & ((dev_t)dev_mask)) != lastdev) || (chk_dev(lastdev, 1) == NULL)) goto bad; break; } if ((lastdev <= 0) || ((dpt = (DLIST *)malloc(sizeof(DLIST))) == NULL)) goto bad; /* * got a new device number, store it under this truncation pattern. * change the device number this file is being stored with. */ dpt->trunc_bits = trunc_bits; dpt->dev = lastdev; dpt->fow = pt->list; pt->list = dpt; arcn->sb.st_dev = lastdev; arcn->sb.st_ino = nino; return(0); bad: paxwarn(1, "Unable to fix truncated inode/device field when storing %s", arcn->name); paxwarn(0, "Archive may create improper hard links when extracted"); return(0); } /* * directory access/mod time reset table routines (for directories READ by pax) * * The pax -t flag requires that access times of archive files to be the same * before being read by pax. For regular files, access time is restored after * the file has been copied. This database provides the same functionality for * directories read during file tree traversal. Restoring directory access time * is more complex than files since directories may be read several times until * all the descendants in their subtree are visited by fts. Directory access * and modification times are stored during the fts pre-order visit (done * before any descendants in the subtree is visited) and restored after the * fts post-order visit (after all the descendants have been visited). In the * case of premature exit from a subtree (like from the effects of -n), any * directory entries left in this database are reset during final cleanup * operations of pax. Entries are hashed by inode number for fast lookup. */ /* * atdir_start() * create the directory access time database for directories READ by pax. * Return: * 0 is created ok, -1 otherwise. */ int atdir_start(void) { if (atab != NULL) return(0); if ((atab = (ATDIR **)calloc(A_TAB_SZ, sizeof(ATDIR *))) == NULL) { paxwarn(1,"Cannot allocate space for directory access time table"); return(-1); } return(0); } /* * atdir_end() * walk through the directory access time table and reset the access time * of any directory who still has an entry left in the database. These * entries are for directories READ by pax */ void atdir_end(void) { register ATDIR *pt; register int i; if (atab == NULL) return; /* * for each non-empty hash table entry reset all the directories * chained there. */ for (i = 0; i < A_TAB_SZ; ++i) { if ((pt = atab[i]) == NULL) continue; /* * remember to force the times, set_ftime() looks at pmtime * and patime, which only applies to things CREATED by pax, * not read by pax. Read time reset is controlled by -t. */ for (; pt != NULL; pt = pt->fow) set_ftime(pt->name, pt->mtime, pt->atime, 1); } } /* * add_atdir() * add a directory to the directory access time table. Table is hashed * and chained by inode number. This is for directories READ by pax */ void add_atdir(char *fname, dev_t dev, ino_t ino, time_t mtime, time_t atime) { register ATDIR *pt; register u_int indx; if (atab == NULL) return; /* * make sure this directory is not already in the table, if so just * return (the older entry always has the correct time). The only * way this will happen is when the same subtree can be traversed by * different args to pax and the -n option is aborting fts out of a * subtree before all the post-order visits have been made). */ indx = ((unsigned)ino) % A_TAB_SZ; if ((pt = atab[indx]) != NULL) { while (pt != NULL) { if ((pt->ino == ino) && (pt->dev == dev)) break; pt = pt->fow; } /* * oops, already there. Leave it alone. */ if (pt != NULL) return; } /* * add it to the front of the hash chain */ if ((pt = (ATDIR *)malloc(sizeof(ATDIR))) != NULL) { if ((pt->name = strdup(fname)) != NULL) { pt->dev = dev; pt->ino = ino; pt->mtime = mtime; pt->atime = atime; pt->fow = atab[indx]; atab[indx] = pt; return; } (void)free((char *)pt); } paxwarn(1, "Directory access time reset table ran out of memory"); return; } /* * get_atdir() * look up a directory by inode and device number to obtain the access * and modification time you want to set to. If found, the modification * and access time parameters are set and the entry is removed from the * table (as it is no longer needed). These are for directories READ by * pax * Return: * 0 if found, -1 if not found. */ int get_atdir(dev_t dev, ino_t ino, time_t *mtime, time_t *atime) { register ATDIR *pt; register ATDIR **ppt; register u_int indx; if (atab == NULL) return(-1); /* * hash by inode and search the chain for an inode and device match */ indx = ((unsigned)ino) % A_TAB_SZ; if ((pt = atab[indx]) == NULL) return(-1); ppt = &(atab[indx]); while (pt != NULL) { if ((pt->ino == ino) && (pt->dev == dev)) break; /* * no match, go to next one */ ppt = &(pt->fow); pt = pt->fow; } /* * return if we did not find it. */ if (pt == NULL) return(-1); /* * found it. return the times and remove the entry from the table. */ *ppt = pt->fow; *mtime = pt->mtime; *atime = pt->atime; (void)free((char *)pt->name); (void)free((char *)pt); return(0); } /* * directory access mode and time storage routines (for directories CREATED * by pax). * * Pax requires that extracted directories, by default, have their access/mod * times and permissions set to the values specified in the archive. During the * actions of extracting (and creating the destination subtree during -rw copy) * directories extracted may be modified after being created. Even worse is * that these directories may have been created with file permissions which * prohibits any descendants of these directories from being extracted. When * directories are created by pax, access rights may be added to permit the * creation of files in their subtree. Every time pax creates a directory, the * times and file permissions specified by the archive are stored. After all * files have been extracted (or copied), these directories have their times * and file modes reset to the stored values. The directory info is restored in * reverse order as entries were added to the data file from root to leaf. To * restore atime properly, we must go backwards. The data file consists of * records with two parts, the file name followed by a DIRDATA trailer. The * fixed sized trailer contains the size of the name plus the off_t location in * the file. To restore we work backwards through the file reading the trailer * then the file name. */ /* * dir_start() * set up the directory time and file mode storage for directories CREATED * by pax. * Return: * 0 if ok, -1 otherwise */ int dir_start(void) { if (dirfd != -1) return(0); /* * unlink the file so it goes away at termination by itself */ memcpy(tempbase, _TFILE_BASE, sizeof(_TFILE_BASE)); if ((dirfd = mkstemp(tempfile)) >= 0) { (void)unlink(tempfile); return(0); } paxwarn(1, "Unable to create temporary file for directory times: %s", tempfile); return(-1); } /* * add_dir() * add the mode and times for a newly CREATED directory * name is name of the directory, psb the stat buffer with the data in it, * frc_mode is a flag that says whether to force the setting of the mode * (ignoring the user set values for preserving file mode). Frc_mode is * for the case where we created a file and found that the resulting * directory was not writeable and the user asked for file modes to NOT * be preserved. (we have to preserve what was created by default, so we * have to force the setting at the end. this is stated explicitly in the * pax spec) */ void add_dir(char *name, int nlen, struct stat *psb, int frc_mode) { DIRDATA dblk; if (dirfd < 0) return; /* * get current position (where file name will start) so we can store it * in the trailer */ if ((dblk.npos = lseek(dirfd, 0L, SEEK_CUR)) < 0) { paxwarn(1,"Unable to store mode and times for directory: %s",name); return; } /* * write the file name followed by the trailer */ dblk.nlen = nlen + 1; dblk.mode = psb->st_mode & 0xffff; dblk.mtime = psb->st_mtime; dblk.atime = psb->st_atime; dblk.frc_mode = frc_mode; if ((write(dirfd, name, dblk.nlen) == dblk.nlen) && (write(dirfd, (char *)&dblk, sizeof(dblk)) == sizeof(dblk))) { ++dircnt; return; } paxwarn(1,"Unable to store mode and times for created directory: %s",name); return; } /* * proc_dir() * process all file modes and times stored for directories CREATED * by pax */ void proc_dir(void) { char name[PAXPATHLEN+1]; DIRDATA dblk; u_long cnt; if (dirfd < 0) return; /* * read backwards through the file and process each directory */ for (cnt = 0; cnt < dircnt; ++cnt) { /* * read the trailer, then the file name, if this fails * just give up. */ if (lseek(dirfd, -((off_t)sizeof(dblk)), SEEK_CUR) < 0) break; if (read(dirfd,(char *)&dblk, sizeof(dblk)) != sizeof(dblk)) break; if (lseek(dirfd, dblk.npos, SEEK_SET) < 0) break; if (read(dirfd, name, dblk.nlen) != dblk.nlen) break; if (lseek(dirfd, dblk.npos, SEEK_SET) < 0) break; /* * frc_mode set, make sure we set the file modes even if * the user didn't ask for it (see file_subs.c for more info) */ if (pmode || dblk.frc_mode) set_pmode(name, dblk.mode); if (patime || pmtime) set_ftime(name, dblk.mtime, dblk.atime, 0); } (void)close(dirfd); dirfd = -1; if (cnt != dircnt) paxwarn(1,"Unable to set mode and times for created directories"); return; } /* * database independent routines */ /* * st_hash() * hashes filenames to a u_int for hashing into a table. Looks at the tail * end of file, as this provides far better distribution than any other * part of the name. For performance reasons we only care about the last * MAXKEYLEN chars (should be at LEAST large enough to pick off the file * name). Was tested on 500,000 name file tree traversal from the root * and gave almost a perfectly uniform distribution of keys when used with * prime sized tables (MAXKEYLEN was 128 in test). Hashes (sizeof int) * chars at a time and pads with 0 for last addition. * Return: * the hash value of the string MOD (%) the table size. */ u_int st_hash(char *name, int len, int tabsz) { register char *pt; register char *dest; register char *end; register int i; register u_int key = 0; register int steps; register int res; u_int val; /* * only look at the tail up to MAXKEYLEN, we do not need to waste * time here (remember these are pathnames, the tail is what will * spread out the keys) */ if (len > MAXKEYLEN) { pt = &(name[len - MAXKEYLEN]); len = MAXKEYLEN; } else pt = name; /* * calculate the number of u_int size steps in the string and if * there is a runt to deal with */ steps = len/sizeof(u_int); res = len % sizeof(u_int); /* * add up the value of the string in unsigned integer sized pieces * too bad we cannot have unsigned int aligned strings, then we * could avoid the expensive copy. */ for (i = 0; i < steps; ++i) { end = pt + sizeof(u_int); dest = (char *)&val; while (pt < end) *dest++ = *pt++; key += val; } /* * add in the runt padded with zero to the right */ if (res) { val = 0; end = pt + res; dest = (char *)&val; while (pt < end) *dest++ = *pt++; key += val; } /* * return the result mod the table size */ return(key % tabsz); }