.\" .\" Copyright (c) 1998, 2000 .\" Justin T. Gibbs. All rights reserved. .\" .\" Redistribution and use in source and binary forms, with or without .\" modification, are permitted provided that the following conditions .\" are met: .\" 1. Redistributions of source code must retain the above copyright .\" notice, this list of conditions and the following disclaimer. .\" 2. The name of the author may not be used to endorse or promote products .\" derived from this software without specific prior written permission. .\" .\" THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR .\" IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES .\" OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. .\" IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, .\" INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT .\" NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, .\" DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY .\" THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT .\" (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF .\" THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. .\" .\" $FreeBSD: src/share/man/man4/adv.4,v 1.7.4.6 2001/10/01 13:07:22 dd Exp $ .\" $DragonFly: src/share/man/man4/adv.4,v 1.4 2008/05/02 02:05:05 swildner Exp $ .\" .Dd February 13, 2000 .Dt ADV 4 .Os .Sh NAME .Nm adv .Nd Advansys ISA/VL/EISA/PCI 8bit SCSI Host adapter driver .Sh SYNOPSIS For one or more ISA or VL cards: .Cd device isa .Cd device "adv0 at isa? port ? irq ? drq ?" .Pp For one or more EISA cards: .Cd device eisa .Cd device adv .Pp For one or more PCI cards: .Cd device pci .Cd device adv .Pp For one or more SCSI busses: .Cd device scbus0 at adv0 .Sh DESCRIPTION This driver provides access to the 8bit .Tn SCSI bus connected to the Advanced Systems Products, Inc. .Tn ASC900 , .Tn ASC1000 , .Tn ASC1090 , .Tn ASC1200 , .Tn ASC3030 , .Tn ASC3050 , and .Tn ASC3150 host adapter chips. The following tables list the AdvanSys products using these chips, their bus attachment type, maximum sync rate, and the maximum number of commands that can be handled by the adapter concurrently. .Bd -ragged -offset indent .Bl -column "ABP510/5150 " "ISA PnP " "Yes " "10MHz " "Commands " Footnotes Connectivity Products: .Pp .Em "Adapter Bus Floppy MaxSync Commands Footnotes" ABP510/5150 ISA No 10MHz 240 1 ABP5140 ISA PnP No 10MHz 16 1, 3 ABP5142 ISA PnP Yes 10MHz 16 4 ABP[3]902 PCI No 10MHz 16 ABP3905 PCI No 10MHz 16 ABP915 PCI No 10MHz 16 ABP920 PCI No 10MHz 16 ABP3922 PCI No 10MHz 16 ABP3925 PCI No 10MHz 16 ABP930 PCI No 10MHz 16 5 ABP930U PCI No 20MHz 16 ABP930UA PCI No 20MHz 16 ABP960 PCI No 10MHz 16 ABP960U PCI No 20MHz 16 .El .Pp Footnotes: .Bl -enum -compact .It This board has been shipped by HP with the 4020i CD-R drive. The board has no BIOS so it cannot control a boot device, but it can control any secondary SCSI device. .It This board has been sold by Iomega as a Jaz Jet PCI adapter. .It This board has been sold by SIIG as the i540 SpeedMaster. .It This board has been sold by SIIG as the i542 SpeedMaster. .It This board has been sold by SIIG as the Fast SCSI Pro PCI. .El .Ed .Bd -ragged -offset indent .Bl -column "ABP510/5150 " "ISA PnP " "Yes " "10MHz " Commands Single Channel Products: .Pp .Em "Adapter Bus Floppy MaxSync Commands" ABP542 ISA Yes 10MHz 240 ABP742 EISA Yes 10MHz 240 ABP842 VL Yes 10MHz 240 ABP940 PCI No 10MHz 240 ABP[3]940UA PCI No 20MHz 240 ABP940U PCI No 20MHz 240 ABP3960UA PCI No 20MHz 240 ABP970 PCI No 10MHz 240 ABP970U PCI No 20MHz 240 .El .Ed .Bd -ragged -offset indent .Bl -column "ABP510/5150 " "ISA PnP " "Yes " "10MHz " "Commands " "Channels " Multi Channel Products (Commands are per-channel): .Pp .Em "Adapter Bus Floppy MaxSync Commands Channels" ABP752 EISA Yes 10MHz 240 2 ABP852 VL Yes 10MHz 240 2 ABP950 PCI No 10MHz 240 2 ABP980 PCI No 10MHz 240 4 ABP980U PCI No 20MHz 240 4 ABP[3]980UA PCI No 20MHz 16 4 .El .Ed .Pp For ISA or Vesa Local Bus adapters, one kernel config entry is required for every card to be attached by the system. Specific values for the port address, irq, and drq may be specified. If wildcard values are used, the driver will query the device for its current settings and use those. If the port address is a wildcard, the driver consults an internal table of possible port address locations and attaches to the first unattached card it finds. The possible port addresses for these card are 0x110, 0x130, 0x150, 0x190, 0x210, 0x230, 0x250, and 0x330. .Pp Per target configuration performed in the .Tn AdvanceWare menu, which is accessible at boot, is honored by this driver. This includes synchronous/asynchronous transfers, maximum synchronous negotiation rate, disconnection, tagged queueing, and the host adapter's SCSI ID. The global setting for the maximum number of tagged transactions allowed per target is not honored as the CAM SCSI system will automatically determine the maximum number of tags a device can receive as well as guarantee fair resource allocation among devices. .Sh SEE ALSO .Xr adw 4 , .Xr aha 4 , .Xr ahb 4 , .Xr ahc 4 , .Xr cd 4 , .Xr da 4 , .Xr sa 4 , .Xr scsi 4 .Sh HISTORY The .Nm driver appeared in .Fx 3.0 . .Sh AUTHORS .An -nosplit The .Nm driver was ported by .An Justin T. Gibbs from the Linux driver written by .An Bob Frey of Advanced System Products, Inc. Many thanks to AdvanSys for providing the original driver under a suitable license for use in .Fx .