/* * Data structures and definitions for the CAM system. * * Copyright (c) 1997 Justin T. Gibbs. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions, and the following disclaimer, * without modification, immediately at the beginning of the file. * 2. The name of the author may not be used to endorse or promote products * derived from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * $FreeBSD: src/sys/cam/cam.h,v 1.6.2.1 2000/03/17 22:36:21 peter Exp $ * $DragonFly: src/sys/bus/cam/cam.h,v 1.6 2007/11/18 17:53:01 pavalos Exp $ */ #ifndef _CAM_CAM_H #define _CAM_CAM_H 1 #ifdef _KERNEL #include #include #endif #include typedef u_int path_id_t; typedef u_int target_id_t; typedef u_int lun_id_t; #define CAM_XPT_PATH_ID ((path_id_t)~0) #define CAM_BUS_WILDCARD ((path_id_t)~0) #define CAM_TARGET_WILDCARD ((target_id_t)~0) #define CAM_LUN_WILDCARD ((lun_id_t)~0) /* * Maximum length for a CAM CDB. */ #define CAM_MAX_CDBLEN 16 /* * Definition of a CAM peripheral driver entry. Peripheral drivers instantiate * one of these for each device they wish to communicate with and pass it into * the xpt layer when they wish to schedule work on that device via the * xpt_schedule API. */ struct cam_periph; /* * Priority information for a CAM structure. The generation number is * incremented everytime a new entry is entered into the queue giving round * robin per priority level scheduling. */ typedef struct { u_int32_t priority; #define CAM_PRIORITY_NONE (u_int32_t)-1 u_int32_t generation; int index; #define CAM_UNQUEUED_INDEX -1 #define CAM_ACTIVE_INDEX -2 #define CAM_DONEQ_INDEX -3 } cam_pinfo; /* * Macro to compare two generation numbers. It is used like this: * * if (GENERATIONCMP(a, >=, b)) * ...; * * GERERATIONCMP uses modular arithmetic to guard against wraps * wraps in the generation number. */ #define GENERATIONCMP(x, op, y) ((int32_t)((x) - (y)) op 0) /* CAM flags XXX Move to cam_periph.h ??? */ typedef enum { CAM_FLAG_NONE = 0x00, CAM_EXPECT_INQ_CHANGE = 0x01, CAM_RETRY_SELTO = 0x02 /* Retry Selection Timeouts */ } cam_flags; /* CAM Status field values */ typedef enum { CAM_REQ_INPROG, /* CCB request is in progress */ CAM_REQ_CMP, /* CCB request completed without error */ CAM_REQ_ABORTED, /* CCB request aborted by the host */ CAM_UA_ABORT, /* Unable to abort CCB request */ CAM_REQ_CMP_ERR, /* CCB request completed with an error */ CAM_BUSY, /* CAM subsytem is busy */ CAM_REQ_INVALID, /* CCB request was invalid */ CAM_PATH_INVALID, /* Supplied Path ID is invalid */ CAM_DEV_NOT_THERE, /* SCSI Device Not Installed/there */ CAM_UA_TERMIO, /* Unable to terminate I/O CCB request */ CAM_SEL_TIMEOUT, /* Target Selection Timeout */ CAM_CMD_TIMEOUT, /* Command timeout */ CAM_SCSI_STATUS_ERROR, /* SCSI error, look at error code in CCB */ CAM_MSG_REJECT_REC, /* Message Reject Received */ CAM_SCSI_BUS_RESET, /* SCSI Bus Reset Sent/Received */ CAM_UNCOR_PARITY, /* Uncorrectable parity error occurred */ CAM_AUTOSENSE_FAIL = 0x10,/* Autosense: request sense cmd fail */ CAM_NO_HBA, /* No HBA Detected error */ CAM_DATA_RUN_ERR, /* Data Overrun error */ CAM_UNEXP_BUSFREE, /* Unexpected Bus Free */ CAM_SEQUENCE_FAIL, /* Target Bus Phase Sequence Failure */ CAM_CCB_LEN_ERR, /* CCB length supplied is inadequate */ CAM_PROVIDE_FAIL, /* Unable to provide requested capability */ CAM_BDR_SENT, /* A SCSI BDR msg was sent to target */ CAM_REQ_TERMIO, /* CCB request terminated by the host */ CAM_UNREC_HBA_ERROR, /* Unrecoverable Host Bus Adapter Error */ CAM_REQ_TOO_BIG, /* The request was too large for this host */ CAM_REQUEUE_REQ, /* * This request should be requeued to preserve * transaction ordering. This typically occurs * when the SIM recognizes an error that should * freeze the queue and must place additional * requests for the target at the sim level * back into the XPT queue. */ CAM_IDE = 0x33, /* Initiator Detected Error */ CAM_RESRC_UNAVAIL, /* Resource Unavailable */ CAM_UNACKED_EVENT, /* Unacknowledged Event by Host */ CAM_MESSAGE_RECV, /* Message Received in Host Target Mode */ CAM_INVALID_CDB, /* Invalid CDB received in Host Target Mode */ CAM_LUN_INVALID, /* Lun supplied is invalid */ CAM_TID_INVALID, /* Target ID supplied is invalid */ CAM_FUNC_NOTAVAIL, /* The requested function is not available */ CAM_NO_NEXUS, /* Nexus is not established */ CAM_IID_INVALID, /* The initiator ID is invalid */ CAM_CDB_RECVD, /* The SCSI CDB has been received */ CAM_LUN_ALRDY_ENA, /* The LUN is already enabled for target mode */ CAM_SCSI_BUSY, /* SCSI Bus Busy */ CAM_DEV_QFRZN = 0x40, /* The DEV queue is frozen w/this err */ /* Autosense data valid for target */ CAM_AUTOSNS_VALID = 0x80, CAM_RELEASE_SIMQ = 0x100,/* SIM ready to take more commands */ CAM_SIM_QUEUED = 0x200,/* SIM has this command in it's queue */ CAM_STATUS_MASK = 0x3F, /* Mask bits for just the status # */ /* Target Specific Adjunct Status */ CAM_SENT_SENSE = 0x40000000 /* sent sense with status */ } cam_status; typedef enum { CAM_ESF_NONE = 0x00, CAM_ESF_COMMAND = 0x01, CAM_ESF_CAM_STATUS = 0x02, CAM_ESF_PROTO_STATUS = 0x04, CAM_ESF_ALL = 0xff } cam_error_string_flags; typedef enum { CAM_EPF_NONE = 0x00, CAM_EPF_MINIMAL = 0x01, CAM_EPF_NORMAL = 0x02, CAM_EPF_ALL = 0x03, CAM_EPF_LEVEL_MASK = 0x0f /* All bits above bit 3 are protocol-specific */ } cam_error_proto_flags; typedef enum { CAM_ESF_PRINT_NONE = 0x00, CAM_ESF_PRINT_STATUS = 0x10, CAM_ESF_PRINT_SENSE = 0x20 } cam_error_scsi_flags; struct cam_status_entry { cam_status status_code; const char *status_text; }; extern const struct cam_status_entry cam_status_table[]; extern const int num_cam_status_entries; union ccb; __BEGIN_DECLS typedef int (cam_quirkmatch_t)(caddr_t, caddr_t); caddr_t cam_quirkmatch(caddr_t target, caddr_t quirk_table, int num_entries, int entry_size, cam_quirkmatch_t *comp_func); void cam_strvis(u_int8_t *dst, const u_int8_t *src, int srclen, int dstlen); int cam_strmatch(const u_int8_t *str, const u_int8_t *pattern, int str_len); const struct cam_status_entry* cam_fetch_status_entry(cam_status status); #ifdef _KERNEL char * cam_error_string(union ccb *ccb, char *str, int str_len, cam_error_string_flags flags, cam_error_proto_flags proto_flags); void cam_error_print(union ccb *ccb, cam_error_string_flags flags, cam_error_proto_flags proto_flags); #else /* _KERNEL */ struct cam_device; char * cam_error_string(struct cam_device *device, union ccb *ccb, char *str, int str_len, cam_error_string_flags flags, cam_error_proto_flags proto_flags); void cam_error_print(struct cam_device *device, union ccb *ccb, cam_error_string_flags flags, cam_error_proto_flags proto_flags, FILE *ofile); #endif /* _KERNEL */ __END_DECLS #ifdef _KERNEL SYSCTL_DECL(_kern_cam); static __inline void cam_init_pinfo(cam_pinfo *pinfo); static __inline void cam_init_pinfo(cam_pinfo *pinfo) { pinfo->priority = CAM_PRIORITY_NONE; pinfo->index = CAM_UNQUEUED_INDEX; } #endif #endif /* _CAM_CAM_H */