/* * Copyright (c) 1996 - 2001 John Hay. * Copyright (c) 1996 SDL Communications, Inc. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. Neither the name of the author nor the names of any co-contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * $FreeBSD: src/sys/dev/sr/if_sr_pci.c,v 1.15.2.1 2002/06/17 15:10:58 jhay Exp $ * $DragonFly: src/sys/dev/netif/sr/if_sr_pci.c,v 1.3 2003/08/07 21:17:05 dillon Exp $ */ #include #include #include #include #include #include #include #include #include #include #include #include #include "../ic_layer/hd64570.h" #include "if_srregs.h" #ifndef BUGGY #define BUGGY 0 #endif static int sr_pci_probe(device_t); static int sr_pci_attach(device_t); static device_method_t sr_pci_methods[] = { /* Device interface */ DEVMETHOD(device_probe, sr_pci_probe), DEVMETHOD(device_attach, sr_pci_attach), DEVMETHOD(device_detach, sr_detach), { 0, 0 } }; static driver_t sr_pci_driver = { "sr", sr_pci_methods, sizeof(struct sr_hardc), }; DRIVER_MODULE(if_sr, pci, sr_pci_driver, sr_devclass, 0, 0); static u_int src_get8_mem(u_int base, u_int off); static u_int src_get16_mem(u_int base, u_int off); static void src_put8_mem(u_int base, u_int off, u_int val); static void src_put16_mem(u_int base, u_int off, u_int val); static int sr_pci_probe(device_t device) { u_int32_t type = pci_get_devid(device); switch(type) { case 0x556812aa: device_set_desc(device, "RISCom/N2pci"); return (0); break; case 0x55684778: case 0x55684877: /* * XXX This can probably be removed sometime. */ device_set_desc(device, "RISCom/N2pci (old id)"); return (0); break; default: break; } return (ENXIO); } static int sr_pci_attach(device_t device) { int numports; u_int fecr, *fecrp; struct sr_hardc *hc; hc = (struct sr_hardc *)device_get_softc(device); bzero(hc, sizeof(struct sr_hardc)); if (sr_allocate_plx_memory(device, 0x10, 1)) goto errexit; if (sr_allocate_memory(device, 0x18, 1)) goto errexit; if (sr_allocate_irq(device, 0, 1)) goto errexit; hc->plx_base = rman_get_virtual(hc->res_plx_memory); hc->sca_base = (vm_offset_t)rman_get_virtual(hc->res_memory); hc->cunit = device_get_unit(device); /* * Configure the PLX. This is magic. I'm doing it just like I'm told * to. :-) * * offset * 0x00 - Map Range - Mem-mapped to locate anywhere * 0x04 - Re-Map - PCI address decode enable * 0x18 - Bus Region - 32-bit bus, ready enable * 0x1c - Master Range - include all 16 MB * 0x20 - Master RAM - Map SCA Base at 0 * 0x28 - Master Remap - direct master memory enable * 0x68 - Interrupt - Enable interrupt (0 to disable) * * Note: This is "cargo cult" stuff. - jrc */ *((u_int *)(hc->plx_base + 0x00)) = 0xfffff000; *((u_int *)(hc->plx_base + 0x04)) = 1; *((u_int *)(hc->plx_base + 0x18)) = 0x40030043; *((u_int *)(hc->plx_base + 0x1c)) = 0xff000000; *((u_int *)(hc->plx_base + 0x20)) = 0; *((u_int *)(hc->plx_base + 0x28)) = 0xe9; *((u_int *)(hc->plx_base + 0x68)) = 0x10900; /* * Get info from card. * * Only look for the second port if the first exists. Too many things * will break if we have only a second port. */ fecrp = (u_int *)(hc->sca_base + SR_FECR); fecr = *fecrp; numports = 0; if (((fecr & SR_FECR_ID0) >> SR_FE_ID0_SHFT) != SR_FE_ID_NONE) { numports++; if (((fecr & SR_FECR_ID1) >> SR_FE_ID1_SHFT) != SR_FE_ID_NONE) numports++; } if (numports == 0) goto errexit; hc->numports = numports; hc->cardtype = SR_CRD_N2PCI; hc->src_put8 = src_put8_mem; hc->src_put16 = src_put16_mem; hc->src_get8 = src_get8_mem; hc->src_get16 = src_get16_mem; /* * Malloc area for tx and rx buffers. For now allocate SRC_WIN_SIZ * (16k) for each buffer. * * Allocate the block below 16M because the N2pci card can only access * 16M memory at a time. * * (We could actually allocate a contiguous block above the 16MB limit, * but this would complicate card programming more than we want to * right now -jrc) */ hc->memsize = 2 * hc->numports * SRC_WIN_SIZ; hc->mem_start = contigmalloc(hc->memsize, M_DEVBUF, M_NOWAIT, 0ul, 0xfffffful, 0x10000, 0x1000000); if (hc->mem_start == NULL) { printf("src%d: pci: failed to allocate buffer space.\n", hc->cunit); goto errexit; } hc->winmsk = 0xffffffff; hc->mem_end = (caddr_t)((u_int)hc->mem_start + hc->memsize); hc->mem_pstart = kvtop(hc->mem_start); bzero(hc->mem_start, hc->memsize); *fecrp = SR_FECR_DTR0 | SR_FECR_DTR1 | SR_FECR_TE0 | SR_FECR_TE1; if (sr_attach(device)) goto errexit; return (0); errexit: sr_deallocate_resources(device); return (ENXIO); } /* * I/O for PCI N2 card(s) */ #define SRC_PCI_SCA_REG(y) ((y & 2) ? ((y & 0xfd) + 0x100) : y) static u_int src_get8_mem(u_int base, u_int off) { return *((u_char *)(base + SRC_PCI_SCA_REG(off))); } static u_int src_get16_mem(u_int base, u_int off) { return *((u_short *)(base + SRC_PCI_SCA_REG(off))); } static void src_put8_mem(u_int base, u_int off, u_int val) { *((u_char *)(base + SRC_PCI_SCA_REG(off))) = (u_char)val; } static void src_put16_mem(u_int base, u_int off, u_int val) { *((u_short *)(base + SRC_PCI_SCA_REG(off))) = (u_short)val; }