/* $OpenBSD: hci_unit.c,v 1.7 2007/06/24 20:55:27 uwe Exp $ */ /* $NetBSD: hci_unit.c,v 1.4 2007/03/30 20:47:03 plunky Exp $ */ /* $DragonFly: src/sys/netbt/hci_unit.c,v 1.1 2007/12/30 20:02:56 hasso Exp $ */ /*- * Copyright (c) 2005 Iain Hibbert. * Copyright (c) 2006 Itronix Inc. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. The name of Itronix Inc. may not be used to endorse * or promote products derived from this software without specific * prior written permission. * * THIS SOFTWARE IS PROVIDED BY ITRONIX INC. ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL ITRONIX INC. BE LIABLE FOR ANY * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND * ON ANY THEORY OF LIABILITY, WHETHER IN * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include struct hci_unit_list hci_unit_list = TAILQ_HEAD_INITIALIZER(hci_unit_list); /* * HCI Input Queue max lengths. */ int hci_eventq_max = 20; int hci_aclrxq_max = 50; int hci_scorxq_max = 50; /* * bluetooth unit functions */ void hci_attach(struct hci_unit *unit) { KKASSERT(unit->hci_softc != NULL); KKASSERT(unit->hci_devname != NULL); KKASSERT(unit->hci_enable != NULL); KKASSERT(unit->hci_disable != NULL); KKASSERT(unit->hci_start_cmd != NULL); KKASSERT(unit->hci_start_acl != NULL); KKASSERT(unit->hci_start_sco != NULL); unit->hci_eventq.ifq_maxlen = hci_eventq_max; unit->hci_aclrxq.ifq_maxlen = hci_aclrxq_max; unit->hci_scorxq.ifq_maxlen = hci_scorxq_max; TAILQ_INIT(&unit->hci_links); LIST_INIT(&unit->hci_memos); TAILQ_INSERT_TAIL(&hci_unit_list, unit, hci_next); } void hci_detach(struct hci_unit *unit) { hci_disable(unit); TAILQ_REMOVE(&hci_unit_list, unit, hci_next); } int hci_enable(struct hci_unit *unit) { int err; /* * Bluetooth spec says that a device can accept one * command on power up until they send a Command Status * or Command Complete event with more information, but * it seems that some devices cant and prefer to send a * No-op Command Status packet when they are ready, so * we set this here and allow the driver (bt3c) to zero * it. */ unit->hci_num_cmd_pkts = 1; unit->hci_num_acl_pkts = 0; unit->hci_num_sco_pkts = 0; /* * only allow the basic packet types until * the features report is in */ unit->hci_acl_mask = HCI_PKT_DM1 | HCI_PKT_DH1; unit->hci_packet_type = unit->hci_acl_mask; err = (*unit->hci_enable)(unit); if (err) goto bad1; /* * Reset the device, this will trigger initialisation * and wake us up. */ crit_enter(); unit->hci_flags |= BTF_INIT; crit_exit(); err = hci_send_cmd(unit, HCI_CMD_RESET, NULL, 0); if (err) goto bad2; while (unit->hci_flags & BTF_INIT) { err = tsleep(unit, PCATCH, "hciena", 5 * hz); if (err) goto bad2; /* XXX * "What If", while we were sleeping, the device * was removed and detached? Ho Hum. */ } #if 0 /* not yet */ /* * Attach Bluetooth Device Hub */ unit->hci_bthub = NULL; unit->hci_bthub = device_add_child(unit->hci_softc, "bthub", -1); if (!unit->hci_bthub) { device_printf(unit->hci_softc, "Device creation failed\n"); goto bad2; } DPRINTFN(10, "%s is added as child to %s\n", device_get_nameunit(unit->hci_bthub), device_get_nameunit(unit->hci_softc)); device_set_desc(unit->hci_bthub,"Bluetooth Device Hub"); device_set_ivars(unit->hci_bthub, &unit->hci_bdaddr); device_probe_and_attach(unit->hci_bthub); #endif return 0; bad2: (*unit->hci_disable)(unit); bad1: return err; } void hci_disable(struct hci_unit *unit) { struct hci_link *link, *next; struct hci_memo *memo; int acl; #if 0 /* not yet */ if (unit->hci_bthub) { device_delete_child(unit->hci_softc, unit->hci_bthub); unit->hci_bthub = NULL; } #endif (*unit->hci_disable)(unit); /* * close down any links, take care to close SCO first since * they may depend on ACL links. */ for (acl = 0 ; acl < 2 ; acl++) { next = TAILQ_FIRST(&unit->hci_links); while ((link = next) != NULL) { next = TAILQ_NEXT(link, hl_next); if (acl || link->hl_type != HCI_LINK_ACL) hci_link_free(link, ECONNABORTED); } } while ((memo = LIST_FIRST(&unit->hci_memos)) != NULL) hci_memo_free(memo); IF_DRAIN(&unit->hci_eventq); unit->hci_eventqlen = 0; IF_DRAIN(&unit->hci_aclrxq); unit->hci_aclrxqlen = 0; IF_DRAIN(&unit->hci_scorxq); unit->hci_scorxqlen = 0; IF_DRAIN(&unit->hci_cmdq); IF_DRAIN(&unit->hci_cmdwait); IF_DRAIN(&unit->hci_acltxq); IF_DRAIN(&unit->hci_scotxq); IF_DRAIN(&unit->hci_scodone); } struct hci_unit * hci_unit_lookup(bdaddr_t *addr) { struct hci_unit *unit; TAILQ_FOREACH(unit, &hci_unit_list, hci_next) { if ((unit->hci_flags & BTF_UP) == 0) continue; if (bdaddr_same(&unit->hci_bdaddr, addr)) break; } return unit; } /* * construct and queue a HCI command packet */ int hci_send_cmd(struct hci_unit *unit, uint16_t opcode, void *buf, uint8_t len) { struct mbuf *m; hci_cmd_hdr_t *p; KKASSERT(unit != NULL); m = m_gethdr(MB_DONTWAIT, MT_DATA); if (m == NULL) return ENOMEM; p = mtod(m, hci_cmd_hdr_t *); p->type = HCI_CMD_PKT; p->opcode = htole16(opcode); p->length = len; m->m_pkthdr.len = m->m_len = sizeof(hci_cmd_hdr_t); M_SETCTX(m, NULL); if (len) { KKASSERT(buf != NULL); m_copyback(m, sizeof(hci_cmd_hdr_t), len, buf); if (m->m_pkthdr.len != (sizeof(hci_cmd_hdr_t) + len)) { m_freem(m); return ENOMEM; } } DPRINTFN(2, "(%s) opcode (%3.3x|%4.4x)\n", unit->hci_devname, HCI_OGF(opcode), HCI_OCF(opcode)); /* and send it on */ if (unit->hci_num_cmd_pkts == 0) { IF_ENQUEUE(&unit->hci_cmdwait, m); } else hci_output_cmd(unit, m); return 0; } /* * Incoming packet processing. Since the code is single threaded * in any case (IPL_SOFTNET), we handle it all in one interrupt function * picking our way through more important packets first so that hopefully * we will never get clogged up with bulk data. */ void hci_intr(void *arg) { struct hci_unit *unit = arg; struct mbuf *m; another: crit_enter(); if (unit->hci_eventqlen > 0) { IF_DEQUEUE(&unit->hci_eventq, m); unit->hci_eventqlen--; crit_exit(); KKASSERT(m != NULL); DPRINTFN(10, "(%s) recv event, len = %d\n", unit->hci_devname, m->m_pkthdr.len); m->m_flags |= IFF_LINK0; /* mark incoming packet */ hci_mtap(m, unit); hci_event(m, unit); goto another; } if (unit->hci_scorxqlen > 0) { IF_DEQUEUE(&unit->hci_scorxq, m); unit->hci_scorxqlen--; crit_exit(); KKASSERT(m != NULL); DPRINTFN(10, "(%s) recv SCO, len = %d\n", unit->hci_devname, m->m_pkthdr.len); m->m_flags |= IFF_LINK0; /* mark incoming packet */ hci_mtap(m, unit); hci_sco_recv(m, unit); goto another; } if (unit->hci_aclrxqlen > 0) { IF_DEQUEUE(&unit->hci_aclrxq, m); unit->hci_aclrxqlen--; crit_exit(); KKASSERT(m != NULL); DPRINTFN(10, "(%s) recv ACL, len = %d\n", unit->hci_devname, m->m_pkthdr.len); m->m_flags |= IFF_LINK0; /* mark incoming packet */ hci_mtap(m, unit); hci_acl_recv(m, unit); goto another; } IF_DEQUEUE(&unit->hci_scodone, m); if (m != NULL) { struct hci_link *link; crit_exit(); DPRINTFN(11, "(%s) complete SCO\n", unit->hci_devname); TAILQ_FOREACH(link, &unit->hci_links, hl_next) { if (link == M_GETCTX(m, struct hci_link *)) { hci_sco_complete(link, 1); break; } } unit->hci_num_sco_pkts++; m_freem(m); goto another; } crit_exit(); DPRINTFN(10, "done\n"); } /********************************************************************** * * IO routines * * input & complete routines will be called from device driver * (at unit->hci_ipl) */ void hci_input_event(struct hci_unit *unit, struct mbuf *m) { if (unit->hci_eventqlen > hci_eventq_max) { DPRINTF("(%s) dropped event packet.\n", unit->hci_devname); unit->hci_stats.err_rx++; m_freem(m); } else { unit->hci_eventqlen++; crit_enter(); IF_ENQUEUE(&unit->hci_eventq, m); crit_exit(); netisr_queue(NETISR_BLUETOOTH, m); } } void hci_input_acl(struct hci_unit *unit, struct mbuf *m) { if (unit->hci_aclrxqlen > hci_aclrxq_max) { DPRINTF("(%s) dropped ACL packet.\n", unit->hci_devname); unit->hci_stats.err_rx++; m_freem(m); } else { unit->hci_aclrxqlen++; crit_enter(); IF_ENQUEUE(&unit->hci_aclrxq, m); crit_exit(); netisr_queue(NETISR_BLUETOOTH,m); } } void hci_input_sco(struct hci_unit *unit, struct mbuf *m) { if (unit->hci_scorxqlen > hci_scorxq_max) { DPRINTF("(%s) dropped SCO packet.\n", unit->hci_devname); unit->hci_stats.err_rx++; m_freem(m); } else { unit->hci_scorxqlen++; crit_enter(); IF_ENQUEUE(&unit->hci_scorxq, m); crit_exit(); netisr_queue(NETISR_BLUETOOTH,m); } } void hci_output_cmd(struct hci_unit *unit, struct mbuf *m) { void *arg; hci_mtap(m, unit); DPRINTFN(10, "(%s) num_cmd_pkts=%d\n", unit->hci_devname, unit->hci_num_cmd_pkts); unit->hci_num_cmd_pkts--; /* * If context is set, this was from a HCI raw socket * and a record needs to be dropped from the sockbuf. */ arg = M_GETCTX(m, void *); if (arg != NULL) hci_drop(arg); crit_enter(); IF_ENQUEUE(&unit->hci_cmdq, m); crit_exit(); if ((unit->hci_flags & BTF_XMIT_CMD) == 0) (*unit->hci_start_cmd)(unit); } void hci_output_acl(struct hci_unit *unit, struct mbuf *m) { hci_mtap(m, unit); DPRINTFN(10, "(%s) num_acl_pkts=%d\n", unit->hci_devname, unit->hci_num_acl_pkts); unit->hci_num_acl_pkts--; crit_enter(); IF_ENQUEUE(&unit->hci_acltxq, m); crit_exit(); if ((unit->hci_flags & BTF_XMIT_ACL) == 0) (*unit->hci_start_acl)(unit); } void hci_output_sco(struct hci_unit *unit, struct mbuf *m) { hci_mtap(m, unit); DPRINTFN(10, "(%s) num_sco_pkts=%d\n", unit->hci_devname, unit->hci_num_sco_pkts); unit->hci_num_sco_pkts--; crit_enter(); IF_ENQUEUE(&unit->hci_scotxq, m); crit_exit(); if ((unit->hci_flags & BTF_XMIT_SCO) == 0) (*unit->hci_start_sco)(unit); } void hci_complete_sco(struct hci_unit *unit, struct mbuf *m) { IF_ENQUEUE(&unit->hci_scodone, m); crit_enter(); netisr_queue(NETISR_BLUETOOTH,m); crit_exit(); }